BSR 2008

B - EXCAVATIONB01 Clearing site vegetation, including bushes, removing shrubs

and top soil to a depth not exceeding 6" and removing away from site.

Sqr. 750.00

B02 Manual Excavation over site to reduce level in any material (except rock requiring blasting) including depositing and levelling as directed up to a distance not exceeding 30'.

Cube 1130.00

B03 Manual Excavation over site to reduce level in any material except rock requiring blasting including depositing and levelling as directed exceeding 30'-0" distance but not exceeding 1/4 mile.

Cube 1280.00

B04 Manual Excavation for column,wall,staircase foundations in any material (except rock requiring blasting) up to 5'0" depth, part return fill in and ram and surplus depositted within site as directed. (Shoring, dewatering blasting up to 5'0" depth if mecessary, shall be paid for separately) Bulk excavation using machinery to be paid for as per item B12

Cube 1645.00

B05 Earth work support (Open planking) in trenches up to a depth of 5'0".

Sq.ft. 69.00

B06 Earth work support (Close planking) in trenches up to a depth of 5'0".

Sq.ft. 120.00

Approved earth shall mean filling materials that comply to the following :

(a) The earth shall be free of vegetation, roots, boulders, easily decomposable materials, chemicals, industrial waste, plastic etc.

(b) The maximum size of particle shall not exceed 75mm.

( c) The earth shall be well graded and the silt and clay (fines) content shall not be more than 30%

B07 Approved hard Earth spreading , leveling watering and manual compaction, using standered cast iron stamper or equivalent and filling in 3"-6" mm thick layers (loose volume) in respected area (Earth available at site)

Cube 960.00

B08 Approved earth supplying within 16 Km from the source and piled at site (measured at piled volume)

Cube 1800.00

Item Description Unit Rate

B09 Transport of Earth per Km per cube for over and above 16 Km

1 Km 120.00

B10 River sand supply within 16km from the source (for distances over 16km, add Rs. 75 per Cube per Killo Meter) subject to the specific approval by the Divisional Engineer) Rate is applicable for loose volume. In case of measurements to be done on compacted volume multiply the rate by 1.2.

Cube 6400.00

B11 Compaction of Earth including watering in 9" layers (measured on piled volume ) using machine Rammer. (Rate include hire charges of the machine .) This rate is applicable for building construction with earth work not exceeding 50 cubes. (earth available at site).

Cube 775.00

B12 Manually spreading and leveling piled approved earth - H.S.R. item Ew1 -002 (applicable for filling out side the building area) rate without compaction

Cube 250.00

B13 Bulk excavation using machinery Cube 725.00 C - CONCRETENote:

1 The quality of the concrete should confirm to the relevant B.S., S.L.S. and ICTAD specification for Building works.

2 Refer General notes for approved cement brands.IN - SITU PLAIN CONCRETE

C01 Cement concrete 1:3:6( 2" ) in wall foundation (Mass concrete)

Cube 23225.00

C02 Cement concrete 1:3:6(1 1/2") in foundation under column footings (concrete mixer)

Cube 24730.00

C03 Cement concrete 1:3:6(1 1/2") in foundation under column footings (lean concrete of 3" thickness)

Sqr. 6180.00

C04 Cement concrete 1:3:6(1") in foundation under column footings (lean concrete of 2" thickness)

Sqr. 3950.00

C05 Cement concrete bedding1:2 1/2:5(1") in Toilets/Garage/Factory floors

Cube 25840.00

IN - SITU REINFORCED CONCRETE

C06 Cement concrete 1:2:4(3/4") footings, beams/lintels and columns in ground floor using mixer and vibrator

Cube 30990.00

C07 Cement concrete 1:1 1/2:3(3/4") using mixer and vibrator in Ground floor

Cube 33425.00

C08 Cement concrete 1:1 1/2:3(3/4") using mixer and vibrator in first floor

Cube 34420.00

C09 Cement concrete 1:1 1/2:3(3/4") using mixer and vibrator in second floor

Cube 35095.00

C10 Cement concrete 1:2:4(3/4") in beams/lintels and columns in first floor using mixer and vibrator.

Cube 31920.00

C11 Cement concrete 1:2:4(3/4") in beams/lintels and columns in second floor using mixer and vibrator.

Cube 32540.00

C12 4" Thick slab in first floor with cement concrete 1:2:4(3/4") using mixer and vibrator.

Sq.. 10900.00

C13 4 1/2" thick R.C.C. slab in cement concrete 1:2:4(3/4") in first floor using mixer and vibrator.

Sqr. 11850.00

C14 5" thick R.C.C. slab in cement concrete 1:2:4(3/4") in first floor using mixer and vibrator.

Sqr. 12800.00

C15 5 1/2" thick R.C.C. slab in cement concrete 1:2:4(3/4") in first floor using mixer and vibrator.

Sqr. 14190.00

C16 6" thick R.C.C. slab in cement concrete 1:2:4(3/4") in first floor using mixer and vibrator.

Sqr. 15200.00

C17 Pre-cast lintols size 9"x6" deep in 1:2:4(3/4") Concrete, reinforced with 3 No 10mm dia. Tor steel bars and MS stirrups of 6mm @ 8" c/c including necessary formwork

L.ft. 300.00

C18 Pre-cast lintols size 4 1/2"x6" deep in 1:2:4(3/4") Concrete, reinforced with 2 No 10mm dia. Tor steel bars and M.S. stirrups of 6mm @ 6" c/c including necessary formwork.

L.ft. 240.00

C19 Cement concrete drains in 1:3:6(1 ") of 6" wide and 9" average depth, 3" thick sides and base including 1:3 rendering to 1/2" thickness, without ramp including necessary formwork.

L.ft. 440.00

C20 Cement concrete - do - with concrete ramp 3" thick and 2'-6" width.

L.ft. 690.00

C21 Cement concrete - do - with concrete ramp 3" thick and 1'-6" width.

L.ft. 415.00

C22 Construction of concrete drain 300mm width x 350mm depth and varies up to 400mm. Rate include for necessary excavation in hard earth, 75mm thick concrete base and walls in Grade 20 concrete, fair finish internal surface with size 450mm wide x 600mm long, 75mm thick Grade 20 removable cover slabs with side formwork. Drain and cover slab reinforced with tor steel 10mm at 150m c/c both ways.

L.ft. 640.00

C23 Construction of concrete drain 450mm width x 600mm minimum depth and varies up to 750mm. Rate include for necessary excavation in hard earth, 100mm thick concrete base and walls in Grade 20 concrete, fair finish internal surface with adequate slab, 75mm thick Grade 20 removable cover slabs with side formwork. Drain cover slab and drain cover slab reinforced with tor steel 10mm at 150m c/c both ways.

L.ft. 820.00

C24 Casting of 6"x6"x6" concrete cubes on a steel mould, curing for 7 days and testing for compressive strength at an approved laboratory (rate includes transport of cubes from site to laboratory ).

No. 1100.00

READY MIX CONCRETEC25 Ready mix concrete of grade 20 (20 N/mm2) confirming to

SLS 144-1997, transport from batching plant and delivered to the site (slump of 12 Cm)

Cum. 8964.00

C26 -Ditto- grade 25 (25 N /mm2) -do- Cum. 9125.00

C27 -Ditto- grade 30 (30N/mm2) do- Cum. 9370.00C28 Placing , leveling and vibrating the concrete. Cum. 400.00 C29 Hire charges for concrete pump car per day (up to 30 m3) Item 12000.00

C30 For more than 30 m3 additional pumping charges. (Rate for every m3 over and above 30 m3)

Cum 400.00

D - FORM WORKNote:

a) The rates given for items D02,D03 to D08 herein are applicable for plywood sheets of 15 mm thick. Hence the rate is valid only if the shuttering / formwork for footing , column , beams , lintel, walls, slabs are of 15 mm thick ply boards.

c) Any deviation from the specified materials, specified thickness and the arrangement of formwork given in this document should require the written approval of the Divisional Engineer. Rate for such deviation from the item description will be decided by the D(B/SW)

D01 Shuttering for sides of foundation with 1" thick rubber planking including dismantling

Sqr 3700.00

For ordinary plywood of 15mm thick boarding as shuttering, (Even for WBP sheets the same rate shall be applicable).

D02 Shuttering of sides and bottom for plinth beams, ground beams including dismantling in 15mm thick plywood board.

Sqr 10260.00

D03 Shuttering for floor slab including dismantling in 15 mm thick Plywood board.

Sqr. 8900.00

D04 Shuttering for columns including dismantling in 15mm thick Plywood board.

Sqr. 11900.00

D05 Shuttering for Beams/Lintols including dismantling in 15 mm thick Plywood Board

Sqr. 14800.00

D06 Shuttering for floor slab including dismantling in 15 mm thick Plywood board support by scaffolding up to 12'.

Sqr. 8780.00

D07 Shuttering for floor slab including dismantling in 15 mm thick Plywood board support by scaffolding up to 16'.

Sqr. 9270.00

D08 Shuttering for Beams/Lintols including dismantling in 15 mm thick Plywood Board support by G.I Jack.

Sqr. 14300.00

Note : The rates given in Items D11,D12,D13 herein are applicable for Rubber planks. The rubber planks are allowed only for minor works and should be used with the written approval of the D.E.

D09 Shuttering for floor slab including dismantling. Sqr. DeletedD10 Shuttering for columns including dismantling. Sqr. DeletedD11 Shuttering for Beams/Lintols including dismantling. Sqr. 5700.00

D12 Shuttering for stiffener columns between wall panels in 9" walls, 4 1/2" walls and in boundary walls.

Sqr. 5100.00

D13 Shuttering for R.C.C. copings in top of balcony , stair and boundary walls and pre - cast lintel sides

Sqr. 3700.00

E - REINFORCEMENTE01 Mild steel reinforcement to slabs, beams, lintels, columns

,footings etc. bent to shape, laid in position and tied with 16 B.W.G. binding wire in Ground floor .

Cwt. 8660.00

E02 Mild steel reinforcement to slabs, beams, lintels, columns ,footings etc. bent to shape, laid in position and tied with 16 B.W.G. binding wire 1st floor.

Cwt. 8920.00

E03 Mild steel reinforcement to slabs, beams, lintels, columns ,footings etc. bent to shape, laid in position and tied with 16 B.W.G. binding wire 2nd floor.

Cwt. 9090.00

E04 Tor steel reinforcement - do - - do - in Ground floor. Cwt. 9290.00

E05 Tor steel reinforcement - do - - do - in 1st floor. Cwt. 9460.00

E06 Tor steel reinforcement - do - - do - in 2nd floor. Cwt. 9755.00

E07 Rate for testing of Tor-steel specimen of 1m length for mechanical properties at an approved laboratory.

sample 3800.00

E08 Application of two coats of Corrosion resistant primer of " BARRA ZINC SP" or equivalent to all exposed reinforcements.

L.ft. 70.00

F - BRICK MASONRYF01 Brick work in cement and sand 1:8 in foundation up to D.P.C.

level.Cube 21780.00

F02 Brick work in cement and sand 1:8 in super Structure in ground floor. ( 9" thick brick work)

Cube 22570.00

F03 Brick work in cement and sand 1:8 in 1st floor level.(9" thick brick work)

Cube 23700.00

F04 Brick work in cement and sand 1:8 in 2nd floor level.(9" thick brick work)

Cube 24150.00

F05 Brick work in cement and sand 1:8 in superstructure in ground floor (8" thick brick work)

Cube 18400.00

F06 Brick work in cement and sand 1:8 in 1st floor level.(8" thick brick work)

Cube 18790.00

F07 Brick work in cement and sand 1:8 in 2nd floor level.(8" thick brick work)

Cube 19310.00

F08 Brick work in cement and sand 1:5 in 4 1/2" thick walls in ground floor.

Sqr. 9425.00

F09 Brick work in cement and sand 1:5 in 4 1/2" thick walls in 1st floor

Sqr. 9900.00

F10 Brick work in cement and sand 1:5 in 4 1/2" thick walls in 2nd floor

Sqr. 10000.00

F11 Brick drain internal size 9"x9"(average depth) including excavation, back filling, 3" thick plain concrete (1:3:6(1") base, 4 1/2" thk. Brick side walls in cement and sand (1:5), render 1/2" thick cement and sand (1:3) and finish smooth with cement putty.

L.ft. 335.00

F12 3" thick brick paving in cement and sand 1:8 mix Sqr. 6715.00

F13 4 1/2" thick wire cut brick wall in cement and sand 1:5 in ground floor

Sqr. 12840.00

F14 9" thick wire cut brick wall in cement and sand 1:5 in ground floor.

Sqr. 24390.00

F15 Steps 1' - 1 1/2" in brick in cement and sand 1:5 with 1/2" thick rendering in cement and sand 1:2 including 6" high foundation.

L.ft. 240.00

F16 Brick work 1:5 in piers. Cube 24000.00

G - HOLLOW AND SOLID BLOCK MASONRY

G01 8" thick cement sand Hollow block wall (blocks confirming to S.L.S. 855 and subject to the approval of the quality of the blocks) in cement and sand mortar 1:5 in G.F.

Sqr. 15700.00

G02 6" thick cement sand Hollow block wall (blocks confirming to S.L.S. 855 and subject to the approval of the quality of the blocks) in cement and sand mortar 1:5 in G.F.

Sqr. 10750.00

G03 4" thick cement sand Hollow block wall (blocks confirming to S.L.S.855 and subject to the approval of the quality of the blocks) in cement and sand mortar 1:5 in G.F.

Sqr. 7630.00

G04 8" thick cement sand Solid block wall (blocks confirming to S.L.S. and subject to the approval of the quality of the blocks) in cement and sand mortar 1:5 in G.F.

Sqr. Deleted

G05 6" thick cement sand Solid block wall (blocks confirming to S.L.S. and subject to the approval of the quality of the blocks) in cement and sand mortar 1:5 in G.F.

Sqr. 10870.00

G06 4" thick cement sand Solid block wall (blocks confirming to S.L.S and subject to the approval of the quality of the blocks) in cement and sand mortar 1:5 in G.F.

Sqr. 8010.00

G07 supply and fixing 1' x 1' cement grill on wall No 90.00

G08 supply and fixing glass blocks size 6" x 6" Sqr.ft 720.00

H - RUBBLE MASONRYH01 Random rubble (6"-9") masonry in cement mortar 1:5 in wall

foundation and retaining walls.Cube 17550.00

J - FLOORINGJ01 3/4" thick D.P.C. in cement sand 1:2 finished with 2 coats of

D.P.C. tar and blinded with sand.Sqr. 5790.00

J02 Gauge 700 polythene damp proof membrane with 6" laps laid under floors

Sqr. 300.00

J03 Rendering 1/2" thick in cement and sand 1:2 in exposed concrete surfaces and garage floors finished smooth with neat cement slurry.

Sqr. 3610.00

J04 Rendering - do - with colour pigment. ( Pigment added at 2.5 Kg / Sqr )

Sqr. 4250.00

J05 Rendering 1/2" thick in cement and sand 1:3 in R.C.C. floors and paved floors finished smooth with neat cement slurry and colour pigment.

Sqr. 3730.00

J06 Rendering 1/2" thick - do - without colour pigment. Sqr. 3180.00

J07 Skirting 4" x 1/2" thick in cement and sand 1:3 projected or flush to walls finished with cement floating including forming groove.

L.ft. 52.00

J08 Skirting 4" x 1/2" thick - do - with colour pigmented neat cement.

L.ft. 56.00

J09 Skirting 6" x 1/2" thick in cement and sand 1:3 projected flush to walls finished with cement floating including forming grove in neat cement slurry.

L.ft. 65.00

J10 Skirting - do - with colour pigmented neat cement. L.ft. 70.00

J11 3" thick brick paving in cement sand 1:8and cement rendered in 1:3 (1/2" thick) floated with neat cement.

Sqr. 11350.00

J12 3" thick brick paving - do - neat cement and colour pigment. Sqr. 11900.00

J13 Floor cement concrete in 1:2 1/2":5(1") to a thickness of 3" with 1/2" rendering 1:2 with expansion joints filled with cement and sand.

Sqr. 9990.00

J14 Brick work in cement 1:5 wearing & throating on 41/2" brick wall including 1/2" thick 1:3 cement rendering

L.ft. 180.00

J15 Brick work in cement 1:5 wearing & throating on 9" brick wall including 1/2" thick 1:3 cement rendering

L.ft. 240.00

Water ProofingThe rates for Items J16, J17,J18and J19 are strictly applicable, subject to the fulfillment of the following conditions.

(a) The waterproofing contractor (or sub-contractor) should be a registered specialist contractor at the ICTAD on the particular area.

(b) The Contractor should sumit a written warranty of at least 5 year to cover on the quality of the material, suitability of the material for the situation and the workmanship including water tightness.

© The water proofing material shall conform to relevant British, Euro or ASTM specificationsApplication of liquid polymer cement water proofing agents for the following areas:

J16 Water Proofing the inner surface of walls and floor slab of toilets and balconyes where a waterproofing is necessary before tiling,Application of "Baralastic" polymer modified cementitious waterproofing agent after cleaning the subtrate all as per manufacturer's specifications with 10 yesr warranty on application.Rate shall include for ponding test for a 300mm water height kept for a period of 48 hours

Sq.ft. 210.00

J17 Flat roofs, concrete/masonry tanks, wet areas of toilets including bathrooms, exposed balconies, concrete gutters. "Smart flex", "Tharoseal" or any other equivalent product marketed/installed by specialist contractor registered at ICTAD.

Sq.ft. 190.00

Application of cementitious type agentsJ18 on newly cast under ground sumps, swimming pools

basements. "Osmoseal", "Xypex", "Vandex" or any other equivalent product marketed/installed by a specialist contractor registered at ICTAD.

Sq.ft. 265.00

Application of membrane type agentsJ19 on large flat roofs, gutters, basements. "Agro" or any other

equivalent product marketed/installed by a specialist contractor registered at ICTAD

Sq.ft. 395.00

The above rates include the cost of surface preparation, but do not include the cost of protective masonry screed. The approving authority for equivalent products will be the Deputy Chief Secretary (Engineering)

J20 Supply and installtion of 1'x1'x3" thick interlocking slab paving (grey colour) on 30 mm thick compacted sand bed laid on top of a well compacted earth sub base

Sq.ft. 200.00

K - PLASTERINGK01 5/8" thick plastering to plinth wall in cement sand 1:3

including cement floating.Sqr. 3460.00

K02 Plastering 5/8" thick to walls in cement, lime or equivelent chemical product (Febmix) and sand 1:1:5 finished semi-rough with wooden float. (Sand to be seived).

Sqr. 3480.00

K03 -Ditto- plaster reveals not exceeding 6" width. L.ft. 80.00 K04 Plastering 5/8" thick to walls in cement, lime or equivelent

chemical product (Febmix) and sand 1:1:5 finished smooth with lime putty.

Sqr. 4430.00

K05 -Ditto- plaster reveals not exceeding 6" width. L.ft. 90.00

K06 Plastering 3/8" thick to soffit of slab, sunshade, sides and soffit of beams stair cases and sides of columns in cement and sand 1:3 including floating with lime putty.

Sqr. 5260.00

K07 Plastering -do - - do - - do - - do - in cement and sand 1:3 and finished semi rough with wooden float.

Sqr. 4950.00

K08 Application of plaster coatings of thickness not less than 2mm "Total coat"", Boral coat", or approved equivalent to slab, beam, column facings.

Sqr. 5330.00

K09 Forming drip for sunshade edge cement sand 1: 2 finish semi rough

L.ft. 75.00

L - TILINGNote:Tiles should comply with European standard specification CEN 177.

Wall tilingL01 Glazed ceramic wall tiling of size 4"x4" white, supplying and

fixing to walls on a 1:3 cement sand mortar layer, and pointed with tile grout to match the tile, (Rate does not include the 1:3 cement sand mortar layer and is separately measured under item L08)

Sqr. Deleted

L02 Glazed ceramic wall tiling of size 6"x6" white, supplying and fixing to walls on a 1:3 cement sand mortar layer, and pointed with tile grout to match the tile, (Rate does not include the 1:3 cement sand mortar layer and is separately measured under item L08)

Sqr. 19865.00

L03 Glazed ceramic wall tiling of size 4"x4" approved colour supplying and fixing to walls on a 1:3 cement sand mortar layer, and pointed with tile grout to match the tile, (Rate does not include the 1:3 cement sand mortar layer and is separately measured under item L08)

Sqr. Deleted


Sqr. 23355.00


Sqr. 20670.00

L06 Glazed ceramic wall tiling of size 8"x 10" approved colour supplying and fixing to walls on a 1:3 cement sand mortar layer, and pointed with tile grout to match the tile, (Rate does not include the 1:3 cement sand mortar layer and is separately measured under item L08)

Sqr. 22680.00

L07 Glazed ceramic wall tiling of size 8"x 12" approved coloured design supplying and fixing to walls on a 1:3 cement sand mortar layer, and pointed with tile grout to match the tile, (Rate does not include the 1:3 cement sand mortar layer and is separately measured under item L08)

Sqr. 22080.00

L08 Cement and sand (1:3) screed of 1/2" thick backing to receive wall tiles.

Sqr. 3100.00

Floor tilingNote:For Item No. L09, L10 and L11 Shall be Homogenous, Vitreous ceramic floor tiles of industrial grade (heavy duty) Floor tile rate includes the cost of 1:3 motar leveling bed.

L09 Industrial grade ( heavy duty) homogeneous vitreous floor tile (mat or glazed) 8"x8" paving on 1:3 cement sand bedding and pointed with tile grout to match the tiles.

Sqr. 23530.00

L10 Industrial grade (heavy duty) homogeneous vitreous floor tile (mat or glazed) 12"x12" paving on 1:3 cement sand bedding and pointed with tile grout to match the tile.

Sqr. 24310.00

L11 Industrial grade (heavy duty) homogeneous vitreous floor tile (mat or glazed) 16"x 16" paving on 1:3 cement sand bedding and pointed with tile grout to match the tile.

Sqr. 26845.00

L12 Supply and laying of 4" high skirting including grouting of tiling conforming to items L09,L10,L11

L.ft. 75.00

L13 Supply and laying of 4" high raking skirting at staircase L.ft. 100.00 Note :The tiles specified inL12, L13 and L14 are exclusively for residential/non-public area as specified by an Architect. The rate is applicable for tiles manufactured by European standards and are of coloured designed tiles.

L14 Lay Ceramic glazed floor tiles 12"x12" (paving on 1:3 cement sand bedding and pointed with tile grout to match the tile.

Sqr. 32765.00

L15 Lay Ceramic glazed floor tiles 16"x16" paving on 1:3 cement sand bedding and pointed with tile grout to match the tile.

Sqr. 35260.00

L16 Lay Ceramic glazed floor tiles 18"x18" paving on 1:3 cement sand bedding and pointed with tile grout to match the tile.

Sqr. 31650.00

Note :Rate for tiling should include for cement and sand 1:3 backing 20mm thick including pointing and grout to match colours and sizes of tiles to approval. by the Architect.

L17 Polished Granite floor tiles size 2'-0"x 1'-0" laid on 1/2" thick cement sand 1:3 screed level off using cement slurry and 1mm joints to be absolutely in line and flush and grout.

Sqr. 31095.00

L18 Non-slippery bathroom floor tiles (heavy duty) of sizes between 8"x 8" and 16"x 16" paving on 1:3 cement sand bedding and pointed with tile grout to match the tiles.

Sqr. 21610.00

M - COLOUR WASHING, PAINTING & POLISHING

Note:M01 White washing walls two coats in single storied building

including preparing surface.Sqr. 460.00

M02 White washing walls two coats in two storied building -do- Sqr. 475.00

M03 Painting walls with one coat of wall primer Sqr. 1025.00

M04 Painting walls with two coats of weather shield Sqr. 1810.00

M05 Painting walls with two coats of emulsion paint Sqr. 1445.00

M06 Painting walls with one coat of Emulsion paint Sqr. 720.00

M07 Painting walls with two coats of snowcem including preparing surface.

Sqr. 1765.00

M08 Cement washing two coats to walls in single storied buildings including preparing surface.

Sqr. 385.00

M09 Painting walls with enamel paint one coat. Sqr. 935.00

M10 Painting walls with Enamel paint two coats. Sqr. 1975.00M11 Preparing and painting old wood work with two coats of

enamel paint.Sqr. 1900.00

M12 Preparing and painting new wood work with primer and two coats enamel paint.

Sqr. 2430.00

M13 Varnishing two coats with polyurethane varnish after sand papering and application of sealer coat

Sqr. 2045.00

M14 Wax polishing to timber in panels and floors. Sqr. 570.00 M15 Applying one coat of approved type floor polish including

smoothing.Sqr. 1040.00

M16 Painting floors with one coat of quick drying floor paint including washing and cleaning surfaces.

Sqrs. 1350.00

M17 Steel anticorrosive paint (one coat) with Primer. Sqr. 1095.00

M18 Steel Anticorrosive Paint (two coats) with primer Sqr. 1550.00

M19 Labour rate for two coats of Emulsion Painting walls including scaffolding (Paint & Brushes supplied by the client)

Sqr. 680.00

M20 Labour rate for single coat of Emulsion Painting walls including scaffolding (Paint & Brushes supplied by the client)

Sqr. 455.00

M21 Labour rate for two coats of enamel painting (Paint & Brushes supplied by the client)

Sqr 975.00

M.22 Painting with aluminium or Red oxide paint Sqr. 760.00

N - DOORS & WINDOWSTimber :Refer general note item 8 VI for approved species. Finished door sash size of less than 1" thicknesses not allowed. Glass thickness to be 5mm window sash size of less than 7/8" thicknesses not allowed.

N01 Door flush paneled 1 1/8" thick single sash hung on 3 3/4" x 2 3/4" frame and brass furniture Rate without painting and lock

Sq.ft. 740.00

N02 Door glazed and paneled 1 1/8" thick single sash hung on 3 3/4" x 2 3/4" frame and brass furniture. Rate without painting and lock

Sq.ft. 755.00

N03 Door flush paneled 1" thick single sash hung on 3 3/4" x 2 3/4" frame and brass furniture Rate without painting and lock

Sq.ft. 710.00

N04 Door glazed and paneled 1" thick single sash hung with 3 3/4" x 2 3/4" frame and brass furniture. Rate without painting and lock

Sq.ft. 635.00

N05 Door 30mm thick plywood ordinary sash single hung on 3 3/4" x 2 3/4" frame and brass furniture. Rate without painting and lock

Sq.ft. 440.00

N06 Door 30mm thick plywood (marine) sash single hung on 3 3/4" x 2 3/4" frame and brass furniture. Rate without painting and lock

Sq.ft. 520.00

N07 Window glazed 1 1/8" sash and 3 3/4" x 2 3/4" frame with brass furniture. Painting measured separately.

Sq.ft. 830.00

N08 Window glazed 1" sash and 3 3/4" x 2 3/4" frame with brass furniture. Painting measured separately.

Sq.ft. 790.00

N09 Window glazed 7/8" sash and 3 3/4" x 2 3/4" frame with brass furniture. Painting measured separately.

Sq.ft. 750.00

N10 Door/Window ledged, braced & battened with 3 3/4" x 2 3/4" frames and 7/8" thick sash and brass furniture. Sash out of GINISAPU Painting measured separately.

Sq.ft. 730.00

N11 Timber slats with 3 3/4" x 1 3/4" frame , 1" x 2 1/2" vertical slats at 2 1/2" centers. Painting measured separately.

Sq.ft. 455.00

P - BRASS FOUNDERNote: All Iron mongary shall be heavy duty and samples should be approved by the D.E. Prior to installation.

P01 Supplying and fixing butt hinges 4" x 2 1/2" brass oxidized. Pair 915.00

P02 Supplying and fixing butt hinges 4" x 3" brass oxidized. Pair 1070.00

P03 Supplying and fixing casement fastener brass oxidized. No. 300.00

P04 Supplying and fixing Heavy duty casement stay - 10" brass oxidized

No. 300.00

P05 Supplying and fixing fanlight catch - brass oxidized. No. 305.00

P06 Supplying and fixing 3" centre pivot - brass oxidized. Pairs 185.00

P07 Supplying and fixing 4" barrel bolt - brass oxidized. No. 365.00

P08 Supplying and fixing 6" barrel bolt - brass oxidized. No. 450.00

P09 Supplying and fixing 10" tower bolt - brass oxidized. No. 465.00

P10 Supplying and fixing Night - latch (Imported) No. 1000.00

P11 Supplying and fixing mortice lock-Imported chinese No 2330.00

P12 Supplying and fixing Union mortice lock-(European make) No. 4730.00

P13 Supplying and fixing Yale mortice lock-(Italy make) No. 6050.00

P14 Supplying and fixing mortice lock- Italian Viro) purchase by Mascons or B.M.C

No. 4090.00

P15 Supplying and fixing "Showa" or "Miwa" cylindrical door lock with knob of Japanese make.

No. 6085.00

P16 Supplying and fixing cylindrical door lock of WHITCO Australian make knob locks or equivalent stainless steel or polished brass.

No. 5400.00

P17 Supplying & fixing medium quality hydraulic door closer

No. 6085.00

P.18 Supplying & fixing heavy quality hydraulic door closer (approved by D.E.)

No. 8380.00

Q - ROOFING AND CEILINGQ01 Roof covering with calicut pattern clay tiles (Timber frame

work and ridge covering measured separately).Sqrs. 5915.00

Q02 Roof covering with corrugated asbestos sheets (Timber frame work and ridge covering measured separately)

Sqrs. 6640.00

Q03 Asbestos close fitting ridges fixed complete with roofing screws or hook bolts

L.ft 170.00

Q04 Ridging with calicut pattern tiles bedded in cement lime sand mortar 1:1:4 and coloured to match the tiles.

L.ft 130.00

Q05 One layer of half round things or asbestos over existing corrugated sheets.

Sqr. 15700.00

Q06 3/4" x 6" wide tongued and grooved lunumidella ceiling boards fixed to underside of existing rafters with brass nails including leveling with timber strip where necessary.

Sqr. 12260.00

Q07 Asbestos eaves ceiling with Halmilla coves & fillets. Under side to existing rafter size of fillet to be 1 1/2"x1/2" size of cove moulding 2"x2"

Sqr. 6620.00

Q08 Supplying and Fixing finished size 4"x2" Coconut Rafters L.ft 100.00 Q09 Supplying and Fixing finished size 3 1/2 "x1 1/2" Coconut

RaftersL.ft 75.00

Q10 Aluminium Valley gutter of 3'-0" wide in gauge 24 sheets including 3/4" thk. Ginisapu timber boarding finished with two coats of wood preservative.

L.ft 960.00

Q11 Aluminium flashing of 1'- 6" wide in gauge 24 sheets including 3/4" thk. Ginisapu timber boarding finished with two coats of wood preservative.

L.ft 760.00

Q12 Aluminium flashing (gauge 24)of 1'-6" wide, bent to shape and fix to wall. (without timber boarding)

L.ft 250.00

FlashingQ13 G.I. Flashing 20 B.W.G. of 1'6" girth with end laps not less

than 6" , turned and tuck up not less 6" in wall and pointed in cement motor 1:2

L.ft. 325.00

Q14 G.I. Valley gutter of 3'-0" wide in gauge 0.48 sheets including 3/4" thk. Ginisapu timber boarding including two coats of anti-corrosive paint and wood preservative to sheet and boarding. (Only to be specified when repairing an existing G.I. gutter)

L.ft 1110.00

Q15 Zincalum flashing (0.47mm thick) and 1'6" wide bent to shape and fixed to wall (without timber coating)

L.ft 330.00

Q16 Zincalum Valley gutter of 3'-0" wide in gauge 20 sheets including 3/4" thk. Ginisapu timber boarding including two coats of anti-corrosive paint and wood preservative to sheet and boarding. (Only to be specified when repairing an existing G.I. gutter)

L.ft 1120.00

Roof Timber

Refer general note item 8 VI for approved timber species. The rate for timber items will remain same irrespective of timber species.

Q17 Roof with calicut pattern tiles on local Micro (Eucalyptus Microcoris) or Balau , Bitis or Kempas timber frame work complete with ridge hips etc.

Sqr. 20450.00

Q18 Roofing with asbestos corrugated sheets on local Micro (Eucalyptus Microcoris) or Balau , Bitis, or Kempas timber frame work (Ridging measured separately).

Sqr. 13700.00

Q19 Asbestos flat ceiling fixed with coves & fillets to local Micro (Eucalyptus Microcoris) or Balau , Bitis or Kempas timber frame work of 4" x 2" @ 4' - 0" c/c 2" x 2" @ 2' - 0" c/c fillet size to be 1 1/2"x1/2" cove moulding size to be 2"x2"

Sqr. 16575.00

Q20 Asbestos flat eaves ceiling fixed with coves and fillets to local Micro (Eucalyptus Microcoris) timber work. or Balau , Bitis or Kempas. fillet size to be 1 1/2"x1/2" cove moulding size to be 2"x2"

Sqr. 13120.00

Q21 3/4" thick x 6" wide tongued and grooved lunumidella ceiling boards fixed horizontal on 4" x 2" local Micro (Eucalyptus Microcoris)or Balau , Bitis or Kempas. timber joist at every 2'0" c/c. cove moulding size to be 2"x2"

Sqrs. 19170.00

Q22 Supplying and fixing 6" x 4', 7" x 2', 6" x 3' and 6' x 2' local micro or Balau , Kempas or Bitis timber purling, hip/valley rafters etc.

Cu.ft. 5150.00

Q23 Supplying and fixing 5"x3" purling up to 12'-0" length Balue, Kempas , Micro.

L.ft 325.00

Q24 Supplying and fixing 4"x3" wall plates up to 12'-0" length, Balue, Kempas, Micro.

L.ft 260.00

Q25 Supplying and fixing 5" x 3" x 5"2" x 4" x 3" local Micro (Eucalyptus Microcoris) Balau , Bitis , Kempas timber purlins,wall plates, rafters etc.

Cu.ft. 3800.00

Q26 Supplying and fixing 4"x2" local Micro (Eucalyptus Microcoris) or Balau Kempas or Bitis timber purling, rafters etc.

L.ft. 195.00

Q27 Supplying and fixing 2"x2" local Micro (Eucalyptus Microcoris) or Balau, Kempas or Bitis timber bearers.

L.ft. 86.00

Q28 Supplying and fixing 2"x1" local micro (Eucalyptus Microcoris)or Balau, Kempas or Bitis. timber reapers

L.ft. 50.00

Q29 Timber valance/barge board in GINISAPU timber size 9" x3/4" thick fixed to roof frame with brass screws.

L.ft. 165.00

Q30 Pressure treatment of timber at an approved kiln including transport charges

Cu.ft. 390.00

Q31 Applying two coats of wood preservative (Clear) to wood work.

Sqrs. 470.00

Q32 Supply and fixing 3/4"x 1/4"x12" long flat iron bracket for fixing valance board/barge board

No. 150.00

R - GUTTERS AND DOWN PIPESNote:

R01 P.V.C. eaves gutter 4 1/2" square type fixed to valance board with P.V.C. brackets at 1'6" c/c including necessary specials.

L.ft. 135.00

R02 P.V.C. down pipes 3 1/2" dia. fixed to wall with PVC clips at 4'-0" c/c including necessary specials.

L.ft 125.00

S - SANITARY FITTINGSNote :

1 In view of the variety of sanitary ware and fittings available in the market, it has become necessary to prescribe the exact quality requirements in terms of performance and durability aspects. The "TOTO" brand and respective model numbers have been chosen as a bench mark to establish the said requirements.

2 The brand name and model number appearing in the respective BSR items are purely meant to describe the performance standard of the said fitting/item and does not imply in any model that only the "TOTO" brand is recommended or considered to be restricted to the "TOTO" brand.

3 Any other make/brand that has equivalent performance characteristics are considered as equivalent provided such fittings met with following criteria.

(a) has an authorized local agent in Sri Lanka(b) The local agent has been in the trade of the offered make

for not less than 5 years.(c) The offered sanitary fitting has a 10 Year manufacturer's

warranty issued by the agent.(d) The cistern mechanism shall have an assurance for the

availability of spares for the next 3 years.(e) The fittings are manufactured in conformity to BS, JIS,

A.S.T.M., A.S. or S.L.S. standards.(f) The dimensions are and performance characteristics are

in par with the stated model.

The brands that may be considered as equivalent are "Ideal" brand, or "American standard" or any other approved make which prior approval to be obtained.

S01 Supply and fix white ceramic wash basin and pedestal of "TOTO" brand, model LW 236CJ/LW 239 FJ or approved equivalent complete to working order inclusive of :

No. 18465.00

(a) TOTO brand model No. T 205 Chromium plated tap or approved equivalent.

(b) Brass Chromium plated "P" trap of "TOTO" brand, model THX-1A3N or approved equivalent.

S02 Supply and fix wall hinge white ceramic wash basin on iron brackets; "TOTO" brand model L34 or approved equivalent complete to working order including fixing to the iron wall brackets. (Rate without pillar tap and bottle trap).

No. 5485.00

S03 Supplying and fixing 11/ 4" (40 mm) dia Bottle 'P' Trap. No. 1370.00 Note :

1 In case where wash basin outlet directly falls on to an open drain, the bottle trap may be omitted.

2 For wash basins fixed on open areas plastic tap of item P08 be specified.

S04 Supply and fix Chromium plated tap of "TOTO" brand model No. T-205 or approved equivalent with 3 year written warranty from the authorized agent.

No. 3775.00

S05 Supply and fix brass Chromium plated "P" trap of 1 1/4" dia. "TOTO" brand model THX-1A-3N or approved equivalent.

No. 3790.00

S06 Supply and fix squatting pan with foot rest "TOTO" brand model CE-6 or approved equivalent.

No. 6145.00

S07 Supply and fix ceramic cistern of "TOTO" brand model or approved equivalent.

No. 8545.00

S08 Supply and fix close couple dual flush ceramic water closet (6-3 Liters) of "TOTO" brand model CW 660 PJ, SW660J or approved equivalent complete to working order.

No. 21250.00

S09 Supply and fix hand held bidet spray of ABS plastic "TOTO" brand model THX 20 NP1V or approved equivalent.

No. 3350.00

S10 Supply and fix Brass Chromium plated 1/2" dia. stop valve of "TOTO" brand model TL 511C1 or approved equivalent.

No. 2700.00

S11 Supply and fix Chromium plated adjustable shower bar of "TOTO" brand model TX721AN or approved equivalent.

No. 6460.00

S12 Supply and fix telephone shower of ABS plastic, 5'-0" long flexible hose of "TOTO" brand model THX 18N or approved equivalent.

No. 4235.00

S13 Supply and fix brass chromium plated soap tray of "TOTO" brand model TX2BV1 or approved equivalent.

No. 3900.00

S14 Supply and fix brass chromium plated single towel bar of 600mm "TOTO" brand, model TX5B or approved equivalent.

No. 7700.00

S15 Supply and fix brass chromium plated toilet paper holder of "TOTO" brand, model TS116R or approved equivalent.

No. 4730.00

S16 Supply and fix brass chromium plated towel ring of "TOTO" brand, model TS115S or approved equivalent.

No. 3060.00

S17 Supply and fix brass chromium plated double swivel type towel bar 450 mm of "TOTO" brand model TX725AC.

No. 9200.00

S18 Supply and fix brass chromium plated towel shelf of "TOTO" brand, model TX4A or approved equivalent.

No. 9770.00

S19 Supply and fix automatic hand dryer of "TOTO" brand, model HD 1000 or approved equivalent including electrical connection.

No. 16385.00

S20 Supply and fix brass chromium plated elbow operated tap for the operating theatres of "TOTO" brand, model T23BQ13 or approved equivalent complete to working order.

No. 6500.00

S21 Supply and fix wall hung ceramic corner wash basin of size 600 x 450 mm of "TOTO" brand, model LW7CJ or approved equivalent complete to working order. Rate inclusive of brackets and connection to pipe line, but without tap and bottle trap.

No. 9100.00

S22 Supply and fix ceramic wall hung wash basin for disabled of "TOTO" brand, model LW103 JT1 or approved equivalent.

No. 29195.00

S23 Supply and fix ceramic urinal with flush valve of "TOTO" brand model U104 or approved equivalent complete to working order.

No. 10170.00

S24 Supply and fix ceramic urinal partition 100 x 350 x 760 mm of "TOTO" brand, model A/100 or approved equivalent.

No. 14565.00

S25 Supply and fix sensor for urinals of "TOTO" brand, model TEA99DV1 or approved equivalent.

No. 67830.00

S26 Supply and fix laboratory sink of 505 x 505 mm with steel pedestal of "TOTO" brand, model LW640CJ and TX812L or approved equivalent.

No. 45750.00

S27 Supply and fix mirror of size 450 x 600 mm of "TOTO" brand, model TX719 AW or approved equivalent.

No. 9990.00

S28 Supply and fix floor drain of square flange of 115 x 115 mm of cast iron with stainless steel TX9BN openable lid of "TOTO" brand or approved equivalent.

No. 6445.00

S29 Closet squatting square type cum foot rest with trap supplied and fixed including flush pipe laid on concrete base. (Indian make)

No. 3100.00

S30 Bowl type glazed ceramic urinal Lanka Ceramic Ltd manufactured or equivalent with trap fixed to wall as directed with inlet and outlet connection.

No. 3730.00

S31 Stainless steel kitchen sink of 'TECCA" brand or approved equivalent single bowl and single drain board including 12mm heavy duty chromium plated swan tap of 'Grohe" or "Pegler" brand and water connection. Waste water connection with flexible hose chain and PVC bottle trap (bottle trap measured as per item T126) All complete to working order.

No. 13000.00

S32 Mirror bevelled rectangular 20"x 15" with hard wood back 3/4" thickness finished with 2 coats of enamel paint. Aluminium clips and key hole hanging plate including glass shelves.

No. 1450.00

S33 Shower rose 6" P.V.C. fixed vertically with 1/2" valve socket including water connection.

No. 250.00

S34 Shower rose chromium plated 6" dia. Fixed vertically with 1/2" valve socket including water connection.

No. 280.00

S35 Supply and fixing plastic seat cover No 800.00 S36 Adjustable shower heads with flexible cords. Make Grohe or

equivalent to approval.No. 8250.00

S37 Supply and install angle valve 12mm dia. chromium plated. Make "Plumber" or equivalent to approval.

No. 1120.00

S38 Bib tap of 12mm dia. chromium plated. Make Grohe or equivalent to approval

No. 1955.00

S39 Supplying and fixing 1/2" bib tap (as per Manufacturer's specification)

No. 800.00

S40 High-level plastic cistern 9 liters capacity supplied and fixed to wall rawl plug & screws complete with P.V.C. flush pipe, stop cock, water supply connection etc. (Malaysian make)

No. 3400.00

T - PLUMBINGNote:All P.V.C. pipes should confirm to S.L.S. 147

T01 Supplying laying and/or fixing 1/2" dia. P.V.C. pipes TYPE 1000 (Specials paid separately).

L.ft. 42.00

T02 -Do- -Do- 3/4" dia. -do- L.ft. 58.00 T03 -Do- -Do- 1" dia. -Do- L.ft. 59.00 T04 -Do- -Do- 1 1/4" dia. -Do- L.ft. 86.00 T05 -Do- -Do- 1 1/2" dia. -Do- L.ft. 123.00

T06 -Do- -Do- 2" dia. -Do- L.ft. 177.00 T07 Supplying and fixing 1/2" brass bib tap. (Heavy duty) No. 690.00

T08 Supplying and fixing 1/2" bib tap " Water-tech" (as per Manufacturer's specification)

No. 660.00

T09 Supplying and fixing 1/2" stop cock. No. 170.00

T10 Supplying and fixing 3/4" stop cock. No. 175.00 T11 Supplying and fixing 1" wheel valve. No. 310.00 T12 Supplying and fixing 1 1/2" wheel valve. No. 400.00 T13 Supplying and fixing 1/2" Handle valve No. 380.00 T14 Supply and install angle valve 12mm dia. chromium plated.

Make "Plumber" or equivalent to approval.No. 1130.00

T15 Bib tap of 12mm dia. chromium plated. Make Grohe or equivalent to approval

No. 2200.00

T16 Adjustable shower heads with flexible cords. Make Grohe or equivalent to approval.

No. 8990.00

T17 Supplying and fixing cormium plated 1/2" angle valve tap with necessary specials

No. 600.00

T18 Supplying and fixing 3/4" Handle valve No. 440.00 T19 Supplying and laying 4" dia. sewer pipes (type 600) Including

cement concrete hunching 1:3:6: ( 1") L.ft. 595.00

T20 Supplying and laying 6" dia. PVC. sewer pipes (type 600) fixed to wall and floor slab with clips.

L.ft. 648.00

T21 Supplying and Fixing 1 1/4" dia PVC. waist pipe (type 600) L.ft. 90.00

T22 Supplying and fixing 1 1/2" dia PVC. waist pipe (type 600) L.ft. 105.00

T23 Supplying and fixing 2" dia. PVC waist pipe (type 600) L.ft. 125.00 T24 Supplying and fixing "Plastishell" water tank 500 Ltr.

capacity (fittings paid separately).No. 6700.00

T25 Supplying and fixing "Plastishell" water tank 1000 Ltr. capacity (fittings paid separately).

No. 15700.00

T26 Supplying and installing 2000 ltr. "pastiche" or fiber glass water tank at average 12 ft. height including transporting and hoisting in position

No. 18600.00

T27 Construction of a 12ft. height R.C.C. trestle to lay a 2000 ltr. water tank. (Water tank measured separately as per item T26 )

No. 48840.00

T28 Construction of a 12ft. height Steel trestle to lay a 2000 ltr. water tank (Water tank measured separately as per item T26)

No. 36405.00

T29 Supplying and fixing 1/2" dia PVC Socket No. 37.00 T30 Supplying and fixing 1/2" dia. PVC Valve Socket No. 24.00 T31 Supplying and fixing 1/2" dia. PVC Faucet Socket No. 23.00 T32 Supplying and fixing 1/2" dia. PVC Elbow No. 33.00 T33 Supplying and fixing 1/2" dia. PVC Equal Tee No. 50.00

T34 Supplying and fixing 1/2" dia. PVC Clips No. 30.00 T35 Supplying and fixing 3/4" dia. PVC Socket No. 42.00 T36 Supplying and fixing 3/4" dia. valve socket No. 30.00 T37 Supplying and fixing 3/4" dia. PVC Elbow No. 45.00 T38 Supplying and fixing 3/4" dia. PVC Equal Tee No. 75.00

T39 Supplying and fixing 3/4" dia. PVC Clips No. 10.00

T40 Supplying and fixing 1" dia. PVC Socket No. 53.00

T41 Supplying and fixing 1" dia. PVC Valve Socket No. 30.00

T42 Supplying and fixing 1" dia. PVC Elbow No. 58.00

T43 Supplying and fixing 1" dia. PVC Equal Tee. No. 95.00

T44 Supplying and fixing 1" dia. PVC Clips No. 9.00

T45 Supplying and fixing 1 1/4' dia. PVC Socket No. 66.00

T46 Supplying and fixing 1 1/4" dia. PVC Faucet Socket No. 43.00

T47 Supplying and fixing 11/4" dia. PVC Elbow No. 77.00

T48 Supplying and fixing 11/4' dia. PVC Equal Tee No. 120.00

T49 Supplying and fixing 11/4" dia. PVC Clips No. 10.00

T50 Supplying and fixing 11/2" dia. PVC Socket No. 109.00

T51 Supplying and fixing 1 1/2" dia. PVC Valve Socket No. 68.00

T52 Supplying and fixing 11/2" dia. PVC Faucet Socket No. 75.00

T53 Supplying and fixing 1 1/2" dia. PVC Elbow No. 138.00

T54 Supplying and fixing 1 1/2" dia. PVC Equal Tee No. 213.00

T55 Supplying and fixing 1 1/2" dia. PVC Bend No. 189.00

T56 Supplying and fixing 1 1/2" dia. PVC Clips No. 12.00 T57 Supplying and fixing 2" dia. PVC Socket No. 152.00

T58 Supplying and fixing 2" dia. PVC Elbow No. 195.00

T59 Supplying and fixing 2" dia PVC Equal Tee. No. 285.00

T60 Supplying and fixing 2" dia. PVC Bend No. 350.00 T61 Supplying and fixing 2" dia. PVC Clips No. 12.00

T62 Supplying and fixing 2" - 1/1/2" dia. PVC. Re. Socket No. 115.00 T63 Supplying and fixing 1 1/2"-11/4" dia. PVC Re. Socket No. 90.00

T64 Supplying and fixing 1 1/2" - 1" -do- No. 75.00 T65 Supplying and fixing 11/4"-1" dia. PVC Re. Socket No. 70.00 T66 Supplying and fixing 1"-3/4" dia. PVC Re. Socket No. 50.00 T67 Supplying and fixing 1"-1/2" dia. PVC Re. Socket No. 45.00 T68 Supplying and fixing 1 1/2"-1/2" dia. PVC Re. Socket No. 73.00 T69 Supplying and fixing 1 1/4"-3/4" -do- No. 65.00 T70 Supplying and fixing 1 1/2"-3/4" -do- No. 78.00 T71 Supplying and fixing 2"-1/2" -do- No. 100.00 T72 Supplying and fixing 2"-1/4" -do- No. 110.00

T73 Supplying and fixing 2"-1" -do- No. 110.00 T74 Supplying and fixing 2"-1 1/4" -do- No. 55.00 T75 Supplying and fixing 3/4"-1/2" dia. PVC Re. Tee. No. 60.00 T76 Supplying and fixing 1"-1/2" dia PVC Re. Tee. No. 74.00 T77 Supplying and fixing 1"-3/4" dia. PVC Re. Tee. No. 100.00 T78 Supplying and fixing 1 1/4"-1/2" dia. PVC Re. Tee No. 90.00 T79 Supplying and fixing 1 1/4'-1" dia. PVC Re. Tee No. 82.00 T80 Supplying and fixing 1 1/4" - 3/4' -do- No. 82.00 T81 Supplying and fixing 1 1/2" -1/2" dia. PVC. Re. Tee. No. 125.00 T82 Supplying and fixing 1 1/2"-3/4" -do- No. 175.00 T83 Supplying and fixing 1 1/2"-3/4" -do- No. 175.00 T84 Supplying and fixing 1 1/2"-1 1/4' -d0- No. 200.00 T85 Supplying and fixing 2"-1/2"-do- No. 230.00 T86 Supplying and fixing 2"- 3/4" dia. -do- No. 230.00 T87 Supplying and fixing 2"-1" dia. -do- No. 230.00 T88 Supplying and fixing 2"- 1 1/4' dia. -do- No. 230.00 T89 Supplying and fixing 3/4"-1/2" Re. Forcet tee No. 50.00 T90 Supplying and fixing 1'-1/2" -do- No. 55.00 T91 Supplying and fixing 1"-3/4" -do- No. 80.00 T92 Supplying and fixing 3/4"-1/2" Re. Elbow No. 43.00 T93 Supplying and fixing 1'-1/2" Re elbow No. 54.00 T94 Supplying and fixing 1'-3/4" Re. Elbow No. 60.00 T95 Supplying and fixing 1/2" dia. bend No. 40.00 T96 Supplying and fixing 3/4" -do- No. 50.00 T97 Supplying and fixing 1" -do- No. 60.00 T98 Supplying and fixing 1 1/4" -do- No. 94.00 T99 Supplying and fixing 1 1/2" -do- No. 210.00

T100 Supplying and fixing 2" -do- No. 354.00 T101 Supplying and fixing 2 1/2 " -do- No. 480.00 T102 Supplying and fixing 3" -do- No. 1000.00 T103 Supplying and fixing 4" -do- No. 1370.00 T104 Supplying and fixing 2 1/2" dia PVC sockets No. 185.00 T105 Supplying and fixing 3' -do- No. 271.00 T106 Supplying and fixing 4" -do- No. 380.00 T107 Supplying and fixing 2 1/2" dia. PVC Valve Sockets No. 350.00

T108 Supplying and fixing 3" -do- No. 550.00 T109 Supplying and fixing 4" -do- No. 750.00 T110 Supplying and fixing 2 1/2" dia. PVC faucet sockets No. 400.00 T111 Supplying and fixing 3" -do- No. 650.00 T112 Supplying and fixing 4" -do- No. 1000.00 T113 Supplying and fixing 2 1/2" dia. PVC Elbow No. 400.00 T114 Supplying and fixing 3" -do- No. 620.00 T115 Supplying and fixing 4" -do- No. 700.00 T116 Supplying and fixing 2 1/2" dia. PVC Equal Tee No. 486.00

T117 Supplying and fixing 3" -do- No. 780.00 T118 Supplying and fixing 4" -do- No. 1000.00 T119 Supply and fixing 1/2" dia flexible hose - 12" length. No 415.00 T120 Supply and fixing 1/2" dia flexible hose - 18" length. No 590.00

Imported Pipe fittingsNote :All imported Pipe fittings shall conform to B.S. Standards and has the Kite mark embossed on the fitting.

Supplying and fixing imported (British make or equivalent approved) fittings of the following category.

T121 Supplying and fixing 4" (110 mm) dia double branch. No. 6085.00

T122 Supplying and fixing 11/4" (40 mm) dia sweep tee 91 deg. No. 1000.00

T123 Supplying and fixing 4" (110 mm) dia trapped floor gulley. No. 4020.00

T124 Supplying and fixing 4" (110 mm) dia floor gulley inlet stainless steel. (cover)

No. 6087.00

T125 Supplying and fixing 11/ 4" (40 mm) dia Bottle 'P' Trap. No. 1335.00

T126 Supplying and fixing 11/2" (110 mm) dia Tubular 'P' Trap. No. 3640.00

T127 Supplying and fixing 11/2" (50 mm) dia sweep tee135 deg.] No. 1400.00

T128 Supplying and fixing 11/2" (50 mm) dia double access branch. (with cleaning eye)

No. 7230.00

T129 Supplying and fixing 4" (110 mm) dia access bend. (with cleaning eye)

No. 6085.00

T130 Supplying and fixing 4" (110 mm) dia single branch. (92deg) No. 3085.00

T131 Supplying and fixing 4" (110 mm) dia single branch. (132 deg)

No. 3485.00

T132 Supplying and fixing 4" (110 mm) dia access branch. 92 deg (with cleaning eye)

No. 5720.00

T133 Supplying and fixing 4" dia. Drainage elbow moulded with cleaning eye (Local make)

No 850.00

T134 Supply and fixing 1" dia ball No 810.00 T135 Supply and fixing 3/4" dia ball No 690.00

T136 Supply and fixing 1/2" dia ball No 630.00

U - DRAINAGE

U01 Manhole consists of Grade 15 concrete base of 75mm thickness, 225mm thick brick side walls, Grade 20 concrete cover slab of 75mm thickness, reinforced with Type 2 deformed tor steel bars of 10mm dia. at 150mm c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 12mm thick cement sand rendering in 1:3 mix trowel smooth with neat grey cement to all internal surfaces and external exposed surfaces. Manhole internal size of 2'-0"x 2'-0" and depth upto 2'-0"

No. 7450.00

U02 Manhole consists of Grade 15 concrete base of 75mm thickness, 225mm thick brick side walls, Grade 20 concrete cover slab of 75mm thickness, reinforced with Type 2 deformed tor steel bars of 10mm dia. at 150mm c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 12mm thick cement sand rendering in 1:3 mix trowel smooth with neat grey cement to all internal surfaces and external exposed surfaces. Manhole internal size of 3'-0"x 3'-0" and depth upto 2'-0" to 3'-0"

No. 12300.00

U03 Manhole consists of Grade 15 concrete base of 75mm thickness, 225mm thick brick side walls, Grade 20 concrete cover slab of 75mm thickness, reinforced with Type 2 deformed tor steel bars of 10mm dia. at 150mm c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 12mm thick cement sand rendering in 1:3 mix trowel smooth with neat grey cement to all internal surfaces and external exposed surfaces. Manhole internal size of 4'-6"x 2'-7 1/2" and depth upto 3'-0" to 5'-0"

No. 41220.00

U04 Construction of brick manhole internal size 4'6"x 2'7 1/2" x 2'6" deep - do - including forming channels. Rate to incolude for RCC Cover slab. Excavation not exceeding 5'0" depth with hard soil. Drawing No. WSS 156.13 & 156.22.

No. 28655.00

U05 Construction of Interceptor Manhole internal size 4'6"x 2'7 1/2"x 5'6" deep - do -. Excavation not exceeding 5'0" depth including working spaces with hard soil - do -

No. 38895.00

U06 Construction of Drop manhole internal size 4'6"x 2' 1/2"x 10'0" deep - do -. Excavation exceed 5'0" depth not exceeding 15'0" depth. Drawing No. WSS 169.02.

58330.00

U07 Manhole consists of Grade 15 concrete base of 75mm thickness,150mm thick RCC side walls r/f with 10mm dia. tor steel work125mm c/c both ways, Grade 20 concrete cover slab of 75mm thickness, reinforced with Type 2 deformed tor steel bars of 10mm dia. at 150mm c/c both ways. Rate to include for excavation, necessary formwork, lifting hooks and 12mm thick cement sand rendering in 1:3 mix trowel smooth with neat grey cement to all internal surfaces and external exposed surfaces. Manhole internal size of 2'-0"x 2'-0" and depth upto 10'-0"

No. 77000.00

U08 Manhole cover 3" thick 2'-0"x2'-0" approx with 1:2:4(3/4") R.C.C. concrete R/F with 10mm dia. torrods @ 4" c/c both ways bottom.

Sq.ft. 400.00

U09 Heavy duty cast iron manhole cover 24"x18" supplying and fixing including cover frame.

No. 5840.00

U10 Gully S.W. 4" supplied and fixed including 1:2:4(3/4")concrete gully box.

No. 1550.00

U11 Gulley size 1'-o"x 1'-0" and depth to suit the location, but not exceeding 2'-0", cast in Grade 20 concrete, 75mm thick base slab, wall and cover slab; Cover slab reinforced with 6mm dia. MS rods @ 150mm c/c. Rate to include for necessary excavation, formwork and 20mm thick cement sand 1:3 rendering to all internal and exposed external surfaces, trowel smooth with neat grey cement.

No. 2413.00

U12 Construction of 3'0" dia. soakage pit as per Draw. No.W.S.S. 169.01 in hard ground.

No. 18220.00

U13 Construction of 4'0" dia. soakage pit as per Drw. No.W.S.S. 169.02 in hard ground.

No. 24900.00

U14 Construction of 6'0" dia. Soakage pit in hard soil as per Drawing No. WSS 169.03

50000.00

U15 Construction of 8'0" dia. Soakage pit in hard soil as per Drawing No. WSS/WP/WS/ TPSP/ 2001/07/01

No. 70000.00

U16 Construction of 30 persons septic tank as per Drw. No.W.S.S. 174.02 in hard ground

No. 115300.00

U17 Construction of 100 persons septic tank built in brick work chambers as per Drawing No. WP/WS/TPSET/2002/05/01.

No. 198715.00

U18 Construction of 50 Persons Septic tank - do - - do - No. 132755.00 U19 Construction of 150 Persons Septic tank - do - Drawing No.

WP/WS/TPSET/2002/03/01No. 238795.00

V - ELECTRICAL INSTALLATION.Note:Work shall be done in accordance with specifications for electrical and mechanical works(ICTAD Publication No.SCA/8 of Nov.1987

1 Internal lighting wiring shall comply with the drawings and shall be in 230/440 volt single core PVC insulated copper cables

2 All switches and socket outlets shall be plated type "Clipsal", " Orange"or Cabtree make.

3 All Fluorescent fittings of gauge 24 GI should be complete with choke (Make:-"Atco","BG" original or -Equivalent) starter and the tube should be Thron, Philips, or Osram

4 All ceiling fans should be KDK, National, Mitsubishi, Hittachi(Original Japan)with guarantee card from the authorized dealer.

5 Rate to include switch boxes, plugs, round or square blocks, Chromium plated M.S. chains, brass hooks, ceiling roses, holders (angle batten and ordinary battens) and any other item necessary.

6 All distribution boards should be incorporated with multi 9 genuine Merlin Gerin, A.B.B. , Hager, F & G , clipsal make MCB's ( Miniature circuit Breaker ) and cabtree, F & G, Clipsal , Merlin Gerin make R.C.C.B.'s (Residual Current circuit Breaker) and Terrasaki, Merlin Gerin, , Dormans Smith ,Biticano , Clockner moeller make M.C.C.B.'s (Moulded Case Circuit Breakers)

7 The whole installation shall be carried out according to CEB/IEE wiring regulations.

8 All the M.C.C.B.'s for the distribution boards should be purchased from the following authorized agents or from their dealers and a certificate or invoice along with their Company seal and Part No., numbers should be produced at the time of payment. Type Agent 1. Merlin Gerin M.C.C.B.'s Figaro Ltd.2. F & G M.C.B.'s and R.C.C.B.'s Rotex Ltd.3. Terrasaki M.C.C.B.'s Rotex Ltd.4. Cabtree R.C.C.B.'s Nawaloka Ltd.

5. K.I.K. M.C.B.'s K.I.K. Engineers 6.Moeller MCB,MCCB,RCCB Richardson Electrical (Pvt)Ltd.7. Orange, Switches and Socket outlet OS Projects Pvt Ltd

Note1 The height of the light bracket from floor level is 2.5m

2 Height of the switches from floor level is 1.5m

3 No ceiling fan should be installed at a height of less than 2.7m from floor level

4 The distance of a light source from the wall should be equal to one half the distance between two adjacent light sources and also the distance between light fittings should not exceed 1.5 times the Mounting height.

Point wiring only with and including switches (Rate includes wiring from MCB through switch to lamp point and includes the switch, switch box, lamp holder wire and conduit)

V01 Light point wired through a 5Amp one gang one way plate switch using 2x1/1.13(2x1/044) P.V.C. insulated copper wire in fully concealed/surface P.V.C. conduits.

per point 1115.00

V02 Light points wired through a 5 Amp two gang one way plate switch using 2x1/1.13 (2x1/044) P.V.C. insulated copper wire in fully concealed/surface P.V.C. conduits

per point 1675.00

V03 Light points wired through a 5 Amp three gang one way plate switch using -ditto-

per point 2235.00

V04 Light points wired through a 5 Amp four gang one way plate switch using -ditto-

per point 2780.00

V05 Light points-wired through a 5Amp 5 gang one way plate switch using - ditto -

per point 3330.00

V06 Light points-wired through a 5Amp 6 gang one way plate switch using -ditto-

per point nil

V07 Light point wired through a 5Amp one gang two way plate switch using -ditto-

per point 1245.00

V08 Light point wired through a 5 Amp one gang one way plate switch using 2x1/1.13(2x1/044) P.V.C. insulated copper wire in fully surface plastic casing and capping

per point 1740.00

V09 Light points wired through a 5 Amp two gang one way plate switch using -ditto-

per point 2300.00

V10 Light points wired through a 5 Amp three gang one way plate switch using -ditto-

per point 2860.00


per point 3425.00

V12 Light points wired through a 5 Amp. 5 gang one way plate switch using -ditto-

per point 3960.00

V13 Light points wired through a 5 Amp. 6 gang one way plate switch using -ditto-

per point nil


per point 2500.00

V15 Light point wired through a 5 Amp one gang one way plate switch using 2x1/1.13 ( 2x1/044)P.V.C. insulated copper wire in half surface with plastic casing and capping and other half in open air.

per point 1515.00

V16 Light points wired through a 5 Amp two gang one way using -ditto-

per point 2010.00

V17 Light points wired through a 5 Amp three gang one way using -ditto-

per point 2575.00


per point 3135.00

V19 Light points wired through a 5 Amp. five gang one way plate switch using -ditto-

per point 3700.00

V20 Light points wired through a 5 Amp. Six gang one way plate switch using -ditto-

per point nil


per point 2500.00

V22 Electric Bell with Bell press switch using 2x1/1.13mm (2x1.044 PVC/insulated copper wire in fully concealed/surface PVC conduits.

No. 1875.00

V23 Electric Bell with bell press switch using flexible wire (twisted twin wire) only in the table legs and floor crossings.

1920.00

V24 5 Amp Switch socket outlet wired using 2x1/1.13 P.V.C. insulated copper wire & 1x7/0.67(7/029)copper earth wire in fully concealed/surface P.V.C. conduits.

No. 1725.00

V25 5 Amp Switch socket outlet wired using -ditto- in fully surface plastic casing and capping.

No. 2205.00

V26 15 Amp switch socket outlet wired using -ditto- in fully concealed/surface P.V.C. conduits.

No. 2290.00

V27 15 Amp switch socket outlet wired using 2x7/0.67(2x7/029)insulated copper wire & 1x7/0.67 copper earth wire in surface plastic casing and capping.

No. 2500.00

V28 Flush mounted 13 Amp. non-reversible type square pin switched socket outlets wired in ring circuit using 4x1x7/0.67 PVC insulated copper wire and 2x7/0.67 PVC insulated copper earth wire in casing and capping.

No. Rate as following formula

R = 360/= x L+255/= x N N(R) Rate per circuit (to be calculated as per formula.

L = Distance from DB to last socket ( in Meter)N = Number of 13 Amp. sockets

V29 Fan regulator wired without a switch using 2x1/1.13 mm P.V.C. insulated copper wire 1x7/0.67 P.V.C. insulated copper earth wire in fully concealed/surface P.V.C. conduits.

No. 1640.00

V30 Fan regulator wired through a 5 Amp plate one gang one way switch using .-Ditto- in fully concealed/surface P.V.C.conduits.

No. 1730.00

V31 Fan regulator wired without a switch using -ditto- in fully surface plastic casing and capping

No. 2025.00

V32 Fan regulator wired through a 5 Amp plate one gang one way switch using -ditto- in fully surface plastic casing and capping

No. 2170.00

V33 Fan regulator wired without a switch using -ditto- in half surface with plastic casing and copping and other half in open area.

No. 2315.00

V34 Fan regulator wired through a 5 Amp plate one gang one way switch using -ditto-

No. 1970.00

V35 Fan regulator wired without a 5Amp plate two gang one way switch using -ditto- in fully concealed/ surface PVC conduit

no 3595.00

V36 Fan regulator wired without a 5Amp plate three gang one way switch using -ditto- in fully concealed/ surface PVC conduit

no 4975.00

Supply install and wiring the following (Rate includes wiring from MCB through switch and regulator to the fan point and includes the cost of fan)

V37 Supply and install a electrical fan and fan regulator wired through a 5Amp plate one gang one way switch using - ditto - in fully concealed surface P.V.C. conduit

No. 7690.00

V38 Supply and install a electrical fan and fan regulator wired through a 5Amp plate one gang one way switch using - ditto - in fully concealed surface P.V.C. conduit casing and capping

No. 7730.00

V39 Supply and install a electrical fan and fan regulator wired through a 5Amp plate one gang one way switch using - ditto - in fully surface with plastic casing and capping and other half in open area

No. 7580.00

Supply & Install only the following fillings.V40 Decorative ceiling lamp (Osram Dulux Carrel or approved

equivalent)No. 2150.00

V41 Bracket lamp of gold plated base and transparent cover. No. 2400.00V42 Bracket lamp with batton holder including bulbs No. 465.00V43 Pendent Lamp No. 455.00

V44 Spot light (equivalent to Osram Halospot) No. 2275.00

V45 Water tight weather proof lamp (equivalent to Osram Dulux Brik)

No. 2500.00

V46 Mercury Vapour Lamp bracket complete 125 watts with clamps (equivalent to Siemens SNA 395)

No. 7690.00

V47 -Ditto- 250 watts (equivalent to Siemens SNA 395) No. 14420.00

V48 Ceiling fan 56" Sweep (KDK,National,Mitsubishi,Hittachi of Japanese origin)

No. 6200.00

V49 Dimmer type fan regulator with a switch (Clipsal, KDK or equivalent)

No 590.00

V50 Exhaust or blower fan 12" dia. (K.D.K. or Equivalent ) No. 10410.00

V51 Wall mounted fan (K.D.K. or Equivalent ) No. 10445.00

Note:In all fluorescent lamp complete fittings incorporating, choke-Atco, BG and starter, Bulb-Philips, Osram, Thorn Choke-Atco, Starter - BG and Bulbs - Philips, osram, Thorn

V52 4-0" long x40W single fluorescent lamp suspension, reflector type.

No. 1000.00

V53 .-Ditto- Box type No. 1000.00 V54 .-Ditto- Diffuser type No. 1150.00 V55 4' -0" longx40W Twin fluorescent lamp suspension, powder

coated reflector type.No. 1500.00

V56 .-Ditto- Box type No. 1500.00 V57 .-Ditto- Diffuser type No. 2050.00 V58 2x20W single fluorescent lamp suspension, powder coated

reflector typeNo. 760.00

V59 .-Ditto- Box type No. 830.00 V60 .-Ditto- Diffuser type No. 995.00 V61 2'-0" longx20W Twin fluorescent lamp suspension powder

coated Reflector typeNo. 1300.00

V62 .-Ditto- Box type No. 1300.00 V63 .-Ditto- Diffuser type No. 1550.00 V64 4'-0" longx20W single fluorescent lamp Batten, powder


V65 .-Ditto- Box type No. 850.00 V66 .-Ditto- Diffuser type No. 1230.00 V67 4'-0" longx20W Twin Fluorescent lamp Batten, powder


V68 .-Ditto- Box type No. 1300.00 V69 .-Ditto- Diffuser type No. 1515.00 V70 2"x40W single fluorescent lamp Batten powder coated

Reflector typeNo. 1175.00

V71 .-Ditto- Box type No. 1175.00 V72 .-Ditto- Diffuser type No. 1690.00 V73 2'-0" longx40W Twin fluorescent lamp Batten powder coated

Reflector typeNo. 1380.00

V74 .-Ditto- Box type No. 1380.00 V75 .-Ditto- Diffuser type No. 1590.00 V76 4-8 ways SP&N Distribution Board with thermo plastic frame

and door, earth and neutral bars din trail type (protection rating IP40)

No. 1420.00

V77 8-10 ways SP&N Distribution board with -ditto- No. 1420.00 V78 10-12 ways SP&N Distribution board with -ditto- No. 1610.00 V79 14-16 ways SP&N distribution board with -ditto- No. 1825.00 V80 16-19 ways SP&N Distribution board with -ditto- No. 1825.00 V81 Provide an earth electrode copper plate 2'-0"x2'-0"x1/8" in 3m

deep. Rate to include connection to the main panel, sub main, earth clips, excavation etc. with 1'-0"x 1'-0"x 1'-0" earth pit including 4 1/2" brick work and 3" concrete slab.

Item 17040.00

V82 Provide an earth electrode 2" dia 6'0" long G.I. pipe -ditto- with 1'-0"x 1'-0"x 1'-0" earth pit including 4 1/2" brick work and 3" concrete slab.

Item 1470.00

V83 Supplying and wiring 2 x 2.5mm2 (7/.029") PVC/PVC/Cu cable + 2.5mm2 (7/.029) earth wire to working order excluding conduit.

L.ft. 50.00

V84 Supplying and wiring 2 x 6mm2 (7/.044") PVC/PVC/ Cu cable + 6mm2 (7/.044") earth wire complete to working order excluding conduit/casing

L.ft. 118.00

V85 Supplying and wiring 2 x 6mm2 (7/.044") PVC/PVC/ Cu cable complete to working order excluding conduit/casing

L.ft. 91.00


L.ft. 183.00


L.ft. 165.00


L.ft. 274.00


L.ft. 237.00

V90 Supplying and wiring 4 x 16mm2 (7/0.064") PVC/PVC/ Cu cable + 16mm2 (7/.064") earth wire complete to working order excluding conduit/casing

L.ft. 401.00

V91 Supplying and wiring 2 x 25mm2 PVC/PVC/Cu cable + 16 mm2 earth wire complete to working order excluding conduit/casing.

L.ft. 332.00


L.ft. 564.00


L.ft. 1808.00

V94 Supplying and fixing 2 core flexible (0.5mm2) - do - L.ft. 14.00V95 Supplying and wiring 2.5mm2 (7/.029") earth wire complete

to working order excluding conduit/casing.L.ft. 12.00

V96 Supplying and wiring 6 mm2 (7/.044") earth wire complete to working order excluding conduit/casing.

L.ft. 27.00


L.ft. 47.00


L.ft. 88.00

V99 Supplying and wiring 1mm2 (1/.044") PVC/PVC/ Cu two wire complete to working order excluding conduit/casing.

L.ft. 11.00

V100 Supplying and wiring 2.5mm2 ((7/.029") PVC/PVC Cu two wire complete to working order excluding conduit/casing.

L.ft. 27.00

V101 Supplying and wiring with 4mm2 (7/.036") PVC/PVC/Cu two wire complete to working order excluding conduit/casing.

L.ft. 34.00

V102 Supplying and wiring with 2* 4mm2 (7/.036") PVC/PVC/Cu cable+4mm2(7/.036) earth wire complete to working order excluding conduit/casing.

L.ft. 80.00

V103 Supplying and wiring with4* 4mm2 (7/.036") PVC/PVC/Cu cable+4mm2(7/.036) earth wire complete to working order excluding conduit/casing.

L.ft. 135.00

V104 Supplying and wiring with 2* 2.5mm2 (7/.029") PVC/PVC/Cu cable+2.5mm2(7/.036) earth wire complete to working order excluding conduit/casing.

L.ft. 55.00

Note:Supply, install and wire with enclosure the following makes :

Cabtree, F & G, Genuine, Merlin & Gerin, Terrasaki,.

V105 25Amp(30 mA) SP&N (Single Phase & Neutral) RCCB No. deleted

V106 25Amp(100 mA) SP&N RCCB No. deletedV107 40Amp(30 mA) SP&N RCCB No. 3215.00 V108 40Amp(100 mA) SP&N RCCB No. 3475.00 V109 60Amp(30 mA) SP&N RCCB No. 4675.00 V110 60Amp(100 mA) SP&N RCCB No. 5800.00 V111 25Amp(30 mA) TP&N (Three Phase & Neutral) RCCB No. deleted

V112 25Amp(100 mA) TP&N RCCB No. deletedV113 40Amp(30 mA) TP&N RCCB No. 4590.00 V114 40Amp(100 mA) TP&N RCCB No. 4590.00 V115 60Amp(30 mA) TP&N RCCB No. 7945.00 V116 60Amp(100 mA) TP&N RCCB No. 7955.00 V117 Main switch 30 Amp SP&N No. 1245.00 V118 MCB SP (Single Pole) 6-40 Amp No. 737.00 V119 MCB SP 50-100 Amp No. 3530.00 V120 MCB DP (Double Pole) 6-40 Amp No. 1730.00 V121 MCB DP 50-100 Amp No. 1775.00 V122 MCB TP ( Three Pole) 6-40 Amp No. 3650.00 V123 MCB TP 50-100 Amp No. 4085.00 V124 30,40,60,100 Amp Three pole MCCB with metal enclosure No. 10060.00

V125 30,40,60,100 Amp four pole MCCB (25KA) with metal enclosure

No. 11600.00

V126 30,40,60,100Amp Three pole MCCB without enclosure No. 9215.00

V127 30,40,60,100Amp Three pole MCCB (25 Ka) without enclosure

No. 10100.00

V128 30 Amp TP&N main switch No. 4950.00 V129 60 Amp TP&N main switch No. 8840.00 V130 D'Bracket complete set (small size) No. 127.00 V131 Supplying and fixing 30 A T.P.N. isolator complete to

working order with enclosure.No. 2255.00

V132 Supplying and fixing 60 A T.P.N. isolator complete to working order with enclosure.

No. 3050.00


No. 5130.00


1680.00

V135 3/4" - 1" PVC conduits laying in the slab including placing binding wire to draw through conduits.

L.ft. 12.00

V136 Supplying and fixing 5/8" PVC conduit including clips. L.ft. 10.00

V137 Supplying and fixing 3/4" PVC conduit including clips. L.ft. 13.00

V138 Supplying and fixing 1" PVC conduit including clips. L.ft. 14.00

V139 Supplying and fixing 3" dia. PVC type 400 pipe including clips.

L.ft. 177.00

V140 Supplying and fixing 1 1 /2" dia. PVC type 400 pipe including clips.

L.ft. 29.00

V141 Supplying and fixing 1 1 /4" dia. PVC type 400 pipe including clips.

L.ft. 22.00

V142 Supplying and fixing 3/4" dia. PVC conduit bend No. 15.00V143 Supplying and fixing 1" dia. PVC conduit bend No. 17.00V144 Supplying and fixing 1 1/2" dia. PVC conduit bend No. 38.00V145 Supplying and fixing 1 1/4" dia. PVC conduit bend No. 27.00V146 Supplying and fixing 2" dia. PVC conduit bend No. 54.00V147 Supplying and fixing 1 1/4" dia. PVC conduit pipe L.ft. 31.00V148 Supplying and fixing 1 1/2" dia. PVC conduit pipe L.ft. 46.00V149 Supplying and fixing 2" dia. PVC conduit pipe L.ft. 56.00V150 Supplying and fixing 1" dia. PVC conduit pipe L.ft. 12.00V151 Supplying and fixing 3/4" or 1" PVC conduit junction box. No. 24.00

V152 Supplying and fixing 1" PVC casing L.ft. 16.00V153 Supplying and fixing 1 1/4" PVC casing L.ft. 20.00V154 Supplying and fixing 1 1/2" PVC casing L.ft. 25.00V155 Supplying and fixing 2" PVC casing L.ft. 36.00V156 Supplying and fixing 2"x 2: box casing. PVC casing L.ft. 65.00V157 Supply and install complete "D" shape bracket including

insulator, Nuts, bolts ect. fixed to working order.per Set 214.00

V158 Supply and install 2"*2"*6mm "L" Iron, including drilling 12mm holes, 10mm G.I. bolt, and application of anticorrosive paint all complete to working order.

Per l.ft 220.00

V159 Supply and install Recessed type ceiling lights with louvered mirror type, florescent lamp fitting with

(a)2'-0"*1'0"-2 no 20 watts fluorescent lamps No. 2880.00(b)2'-0"*2'0"4 no 20 watts fluorescent lamps No. 3410.00(c)2'-0"*1'0"-4 no 20 watts fluorescent lamps No. 4530.00(d)4'-0"*1'0"-2 no 40 watts fluorescent lamps No. 3580.00(e)4'-0"*1'0"-3 no 40 watts fluorescent lamps No. 5340.00(f)4'-0"*4'0"-4 no 40 watts fluorescent lamps No. 5985.00

V160 Supply and wiring 2x6mm2(7/044) PVC/PVC/CU Cable complete to working order excluding conduit & casing

Lft. 100.00

W - METAL WORKNote:Aluminium doors, windows and partitions shall confirm to the following requirements:

1 Aluminium alloy should confirm to- BS 1474:1972 Surface treatment shall confirm to BS 1615 and BS 3987

2 Anodized coating thickness should be 15 +/- 5 microns

3 Minimum section thickness 1.8mm door frame , 1.5 mm window frame and 1.00 mm partition.

4 Most of the aluminium extrusions available in the Local Market are being manufactured in Sri Lanka by two leading companies and both companies are changing the extrusion profiles and thicknesses from time to time. Hence it has become very difficult t o specify standard section sizes that are to be used for door /window frames and sash members. Hence the rates given herein are based on the recommended minimum sizes and thicknesses and profiles as per their hand books published by M/S ALUMAX (PVT) LTD and by M/S LANKA ALUMINIUM INDUSTRIES LTD

5 At the same time of bidding, all the Bidders shall specifically be requested to submit the following information.

(a) The specifications and thickness of Aluminium extrusions bidder proposes to use on the works.

(b) Full size cross sections© Documentary evidence from the Profile Manufacture to

the effect that the proposed profile will serve for the intended purpose.

(d) A Manufacturer's test certificate be produced as evidence that the powder coating is of required thickness.

6 Physical properties :- (a) Minimum tensile strength 150 Mpa(b) Elongation 7%

7 All screws should be stainless steel8 But hinges and bar type hinges should be Aluminium or

Stainless Steel.The item descriptions should be read along with the annexed detail drawings. The rates and hence the item description shall include 5mm thick plain or Tinted glass, Neoprene gasket, pop revets, Rawl plugs, Screws, Aluminium cleats etc.

9 The rates given herein are for Bronze Anodized aluminium profiles.For powder coated aluminium profiles (minimum powder coating thickness of 40 + 5 microns) the rates shall be increased by 10%.

For natural aluminium profiles, the rates shall be decreased by 5%.Single Sliding Door

W01 Bronze anodized aluminium glazed single sliding door with mid rail and 5mm thick tinted glass panes, neoprene and wool beading, gaskets, flush bolt, threaded bar with nut roller, cup and approved quality lock

Sq.ft. 735.00

Double Sliding DoorW02 Bronze anodized aluminium glazed double sliding door with

mid rail and 5mm thick tinted glass panes, neoprene and wool beading, gaskets, flush bolt, threaded bar with nut roller, cup and approved quality lock

Sq.ft. 780.00

Double Sliding Door with FanlightW03 Bronze anodized aluminium glazed double door with sliding

fanlight on top with mid rail and 5mm thick tinted glass panes, neoprene and wool beading, gaskets, flush bolt, threaded bar with nut roller, cup and approved quality door lock, door handle with cap and nut and floor closer.

Sq.ft. 1190.00

W04 Bronze anodized aluminium glazed double door with sliding fanlight on top with mid rail and 5mm thick tinted glass panes, neoprene and wool beading, gaskets, flush bolt, threaded bar with nut roller, cup and approved quality door lock, door handle with cap and nut without door closer

Sq.ft. 1000.00

Swing Door Single Sash Butt HingesW05 Bronze anodized aluminium single sash sliding door with mid

rail and 5mm thick tinted glass panes, neoprene and wool beading, gaskets, pop rivots, hreaded bar with nut and approved quality lock, butt hinges, door handle with cap nut.

Sq.ft. 950.00

Swing Door Double sash floor HingeW06 Bronze anodized aluminium double sash (swing type) with

mid rail and 5mm thick tinted glass panes, neoprene and wool beading, gaskets, flush bolts, hreaded bar with nut and approved quality lock, butt hinges, door handle with cap nut and floor mounted door closer.

Sq.ft. 2450.00

W07 Bronze anodized aluminium double sash (swing type) with mid rail and 5mm thick tinted glass panes, neoprene and wool beading, gaskets, flush bolts, hreaded bar with nut and approved quality lock, butt hinges, door handle with cap nut without door closer.

Sq.ft. 1190.00

Top Fixed Swing Door Double Sash Floor Hinge

W08 Bronze anodized aluminium double sash (swing type) with fixed glass on top, mid rail and 5mm thick tinted glass panes, neoprene and wool beading, gaskets, flush bolts, hreaded bar with nut and approved quality lock, butt hinges, door handle with cap nut and floor mounted door closer.

Sq.ft. 2200.00

W09 Bronze anodized aluminium double sash (swing type) with fixed glass on top, mid rail and 5mm thick tinted glass panes, neoprene and wool beading, gaskets, flush bolts, hreaded bar with nut and approved quality lock, butt hinges, door handle with cap nut without door closer.

Sq.ft. 1075.00

Swing Door Single Sash Butt Hinges - Veneered Plywood door

W10 Bronze anodized aluminium single sash butt hinges 3mm thick veneered plywood on both side door with mid rail and 5mm thick tinted glass panes, neoprene and wool beading, gaskets, pop rivots, hreaded bar with nut and approved quality lock, butt hinges, door handle with cap nut.

Sq.ft. 960.00

Swing Door Single Sash Butt Hinges Ply Board

W11 Bronze anodized aluminium single sash butt hinges 3mm thick ply board both side door with mid rail and 5mm thick tinted glass panes, neoprene and wool beading, gaskets, pop rivots, hreaded bar with nut and approved quality lock, butt hinges, door handle with cap nut.

Sq.ft. 1000.00

Swing Door Single Sash Butt Hinges Aluminium Sheeting

W12 Bronze anodized aluminium single sash butt hinges Aluminium sheeting paneled board door with neoprene and wool beading, gaskets, pop rivots, hreaded bar with nut and approved quality lock, butt hinges, door handle with cap nut.

Sq.ft. 975.00

Double Sliding Window with TransomW13 Bronze anodized aluminium double sliding with Transom,

consisting of 5mm thick tinted glass and frame.Sq.ft. 1050.00

Sliding with Top FixedW14 Bronze anodized aluminium sliding window with top fixed

consisting of 5mm thick glass and lock, roller screws, gaskets, nut felt, pop rivots, cap, plastic guide etc.

Sq.ft. 750.00

Double Sliding Window

W15 Bronze anodized aluminium double sliding window consisting of 5mm thick glass and lock, roller screws, gaskets, wool felt, plastic guide and cap etc.

Sq.ft. 675.00

Sliding Window with Top PivotW16 Bronze anodized aluminium sliding window with top

pivot/top hung consisting of 5 mm thick tinted glass and locks, roller screws, gasket wool felt, pop rivots, cap plastic guide, pivot hinge, pivot lock and weather ring etc.

Sq.ft. 1210.00

Sliding Window with Top LouverW17 Bronze anodized aluminium sliding window with top louvers

and 5mm thick glass and aluminium frame with locks, roller, screws, gaskets, wool felt, pop rivots, cap and plastic guide etc.

Sq.ft. refer item no.W18 & W25

Sliding WindowW18 Bronze anodized aluminum sliding window consisting of

5mm thick tinted glass and lock, roller screws, gasket, wool felt, pop rivots, plastic guide and cap etc.

Sq.ft. 780.00

Double Sliding WindowW19 Bronze anodized aluminum double sliding( 4 track) window

consisting of 5mm thick tinted glass and lock, roller screws, gasket, wool felt, pop rivots, plastic guide and cap etc.

Sq.ft. 1035.00

Casement Window with Sash (Using)W20 Bronze anodized aluminium casement window with sash

casement hook, screws, pop rivots, door hinge, weather strip gasket etc.

Sq.ft. 850.00

W21 Bronze anodized aluminium casement window with sash divided using casement hook, screws, pop rivots, door hinge, weather strip gasket etc.

Sq.ft. 970.00

Casement Window with Top HungW22 Bronze anodized aluminium casement window with top hung

fanlight and complete with casement lock, screws, pop rivots, gaskets, door hinge, weather strip etc.

Sq.ft. 1050.00

Casement Window with Top LouverW23 Bronze anodized aluminium casement window with top

louver consisting of casement lock, screws, pop rivots, gaskets, door hinge, weather strip etc.

Sq.ft. 975.00

Fixed WindowW24 Bronze anodized aluminium fixed glazed window with 5mm

thick tinted glazed and screws, pop rivots, gasket and wool felt etc.

Sq.ft. 460.00

LouverW25 Bronze anodized aluminium frame louvers with pop rivots,

screws etc.Sq.ft. 975.00

Partition with Glass & Board

W26 Bronze anodized partition frame top and bottom 3mm thick ply board both side (total thickness 6mm), 5mm thick tinted glass with pop rivots, gasket and GI channels

Sq.ft. 515.00

Partition with DoorW27 Bronze anodized aluminium partition or shop front with fully

glass (5mm thick tinted) and door single sash hinged type with pop rivots, gasket, wool felt, door handle with cap nut, door lock, butt hinges, GI channels, threaded bar with nuts etc.

Sq.ft. 635.00

W28 Bronze anodized aluminiuum with 5mm thick tinted glass on top and 3mm plywood sheet at bottom (total board thickness 6mm t) with single sash hinged type with pop rivots, screws, gasket etc.

Sq.ft. 680.00

Shop Front with DoorW29 Bronze anodized aluminium shop front with door 5mm thick

tinted glass and hinged door with pop rivots, casements, gaskets, wool felt, door handle, cap nut, door lock, floor hinge, threaded bar with nut etc.

Sq.ft. 1135.00

Shop Front with Glass and boardW30 Bronze anodized aluminium shop front with 5mm thick tinted

glass on top and 3mm plywood sheet at bottom (total thickness 6mm) with single sash hinged type with pop rivots, casements, gaskets, wool felt, cap nut, threaded bar with nut etc.

Sq.ft. 670.00

Curtain Wall with SashW31 Bronze anodized aluminium curtain wall with 5mm thick

tinted glass sash fixed with casement lock, pop rivots, arm pair, gasket, double foam tape etc.

Sq.ft. 1250.00

Gypsum Board PartitionW32 Fabricating and installing gypsum board partitioning with

necessary GI channel member frame work fixed on to wall and floors and 1/2" thick gypsum board fixed to both sides of the frame work all completed with board joints taped and finished with gypsum compound to get wall finish. Rate to include for applying one coat of Acrylic filler to boards.

Sq.ft. 485.00

W33 Supply, fabricate and install powder coated (color to approval) aluminium partition for cubicles including vertical, horizontal members fixed with suitable expansion type Anchor bolts to RCC column, floor etc. consisting of 12mm thick plywood laminated with coloured high pressured melamine coated board (perstorp or equivalent to approval) on both faces (colour to approval) for bottom panel, 5mm thick clear float glass for middle panel and to top panel to approval (height varies from 7'-0" to 8'-0") complete with suitable gaskets around frames. (Door measured separately). Powder coating thickness + microns.

Sq.ft. 550.00

Door Pull HandleW34 Supplying and fixing 'U' shape stainless steel door pull handle

fixed complete to working order.No 6000.00

CEILINGW35 Expanded polystyrene panel ceiling system consisting 4'-0"x2'-

0"x3/4" thick expanded polystyrene ceiling panels, white backed enamel aluminium capped. G.I. T-Section frame work suspended on gage 14 G.I. wire at 4'-0" centers

Sq.ft. Deleted

W36 Mineral fiber suspended ceiling system consisting 4'-0"x2'-0"x9/16" thick mineral fiber ceiling panels, white backed enamel aluminium . capped G.I. T - Section frame work suspended on gage14 G.I. wires at 4'-0" centers

Sq.ft. 215.00

W37 Supply and install mineral fiber Japanese make suspended exposed ceiling system using 2'-0"x 2'-0"x 12mm ceiling slabs in white color interlock type aluminium grid system suspended with gauge 14GI wire to soffit of concrete or timber roof members.

Sq.ft. 310.00

W38 Supplying and fixing 10mm thick gypsum board suspended ceiling 2'-0"x 2'-0"x with GI grid system comprising main T bars, hangers etc. Rate to include for making joints and applying one coat filler.

Sq.ft. 355.00

IRON GRILLW39 Welded, Diamond shaped Iron grill, consisting 1/4"x3/4" flat

iron frame, 1/4" dia M.S. rods at 3" centers to form 3"x6" diamond shape grill Rate shall include for fixing with No.10, 1" counter sunk iron screws and applying two coats of anti- Corrosive paint. (Based on 2'-0"x4'-0" area)

Sq.ft. 337.00

W40 Welded Diamond shaped iron grill, consisting 1/4"x3/4" flat iron frame without joints, 1/4"x3/4" mullions without joints, 1/4"x3/4" isolated mid rails, 1/4" dia. M.S. rods welded to form 3"x6" diamond shaped isolated panels. Rate -do- (Based on 9'-0"x6'-0" area)

Sq.ft. 290.00

W41 Mild steel door 3'-0"x9"-0" high overall with 2'-3" high Iron grill on top consisting 1 1/2"x1 1/2"x4mm thick angle Iron door frame, 1/4" dia. mild steel grill on top (3"x6" diamond shape), 1"x1" M.S. Hollow section outer frame in sash with 2 No. 1"x1"x 3mm thick angle iron mid rail at 3'-0" hight, sheet gage 2.0 G.I. bottom panel, 1/4" dia. mild steel grill on top panel , (3"x6" diamond shape) fix complete with 3No. 4"x4" M-S Butt Hinges tower bolt and Hasp and plate. Rate shall include for applying shall two coats of anti-Corrosive paint.

Sq.ft. 375.00

W42 Welded Diamond shaped iron grill, consisting 3/4"x3/4"x 4mm angle iron frame 1/4"x3/4" Mullions at 2'-0" centres.1/4" dia. MS rods welded together to form 3"x6" Diamond shape grill. Rate shall include for fixing with No.10, 1" counter sunk iron screws and applying -do-.

S.ft. 370.00

MILD STEEL BALUSTRADEW43 Mild steel balustrade in stair case consisting 1/4"x1 1/2" flat

iron top rail, 2 No. 1/4"x3/4" flat iron side rails welded together with 5/8" dia. M.S. uprights at 1'-0" centers. Rate shall include for making holes and fixed to stair case and applying two coats of anti-Corrosive paint.

L.ft. 470.00

W44 Fabricate, supply and fix stainless steel pipe hand rail at staircase comprising 1 1/4" dia. uprights at 1'-0" c/c, 2" dia. top rail and 1" dia. middle rail. Uprights fixed to steps with 100 x 100 x 8mm thick S.S. base plate with 8mm dia. S.S. nuts and bolts complete as per working order.

L.ft. 3700.00

Y - STRUCTURAL STEEL WORKY01 Supplying and fixing 2"x2"x5mm angle iron purling at

maximum spacing of 4'-0" centers upto maximum span of 10'-0" including nuts, necessary bolds & washers etc. and application of two coats of Anti-Corrosive paint.

L.ft. 240.00

Y02 Supplying and fixing 2 1/2"x 2 1/2" x 5mm angle iron purling at maximum spacing of 4'-0" centers maximum span of 11'-0"(not less than 10'-0") for a asbestos purling roof without covering tiles on top. Rate shall include for necessary nuts, bolds & washers, etc. applying two Anti-Corrosive paint.

L.ft. 273.00

Y03 Supplying and fixing3"x3" x 5mm angle iron purling at maximum spacing of 4'-0" centers maximum span of 12'-0"(not less than 11'-0") for a asbestos purling roof without covering tiles on top. Rate shall include necessary nuts, olds & washers etc. , applying two coats of anti -Corrosive paint.

L.ft. 347.00

Y04 Supplying and fixing 4" x 2" x 5mm channel Iron purling including 2 coat of anticorrosive paint up to 14'-0" span at 4'-0" c/c

L.ft. 428.00

Y05 Supplying and fixing 5" x 21/2" x 6mm chanel Iron purling to existing Roof frame work , including two coats of anti-corrosive paint up to 16'-0" span, at 4'-0" c/c

L.ft. 798.00

Y06 Supplying and fixing 6" x 3" x 1/4" channel Iron -do- up to 18'-0" span at 4'-0"c/c

L.ft 967.00

Mild steel Roof truss Y07 Mild steel Roof truss (Maximum spacing 10'-0" ),20'-0", span

centre to centre, 25 pitch max,18 pitch minimum with 4'-0" wide eaves at both sides, consisting of 2 No. 2"x2"x 5mm angles as top and bottom chords, 1 No. 2"x2"x 5mm angles as struts and ties, 1/4" thick gusset plates, 3/8" thick. base plates, 1/2" dia M.S. Rag bolts, 3"x3"x 5mm size 1'-0" long purling cleats at 3'-6" centers and 2"x2"x 5mm thick spacers at 2'-0" centers. Rate shall include for fabricating, transport, hoisting, fixing in position, and applying two coats of anti corrosive paint. (as per detail drg. No. 1190 school work branch)

No 39000.00

Y 08 Mild steel Roof truss (Maximum spacing 10'-0") 25'-0", span centre - do-

No 45000.00

Y09 Supplying, fabricating and hoisting in position of 9 m (30'-0") span steel roof truss as per Drawing No. 1732 of School Work Division of Ministry of Education comprising of 2 No. 65 x 65 x 6mm double angles as top and bottom welded with M.S. Plate of 65 x 65 x 8mm at 600mm intervals, and web member comprising of double angle of sizes 65 x 65 x 6mm and 50 x 50 x 6mm connected with 8mm thick mild steel gusset plate and 10mm thick base plate of 225 x 225 on either side and 10mm thick vertical gusset plate at the ends. All as per drawing including 02 coats of Zinc Phosphate paint and two coats of enamel paint including hoisting in position. Rate shall include for hoist in position.

No 65000.00

Steel ScaffoldingY10 Supplying and erecting steel scaffolding. Rate to include for

dismantling same after completion of work.Set per

day77.00

Zinc Alum RoofingY11 Supplying and fixing zinc aluminium color bond standard

ridge cap to existing sheet roof using new fasteners.L.ft. 305.00

Y12 Supply and fix proprietary coated zinc alum gutter (minimum base metal thickness of sheet 0.4mm and minimum total thickness 0.47mm) complete with end caps, running joints etc.. All joints to be properly connected with an adequate side laps not less than 225mm length and with sealant to ensure water tightness along the entire length of the gutter and including angle iron gutter brackets 25x25x3mm at 450mm centers with an adequate slope as directed and including application of two coats of each anticorrosive paint and enamel paint to all steel surfaces to match the gutter fix in position.

L.ft. 510.00

Y13 Color bonded wall cladding 0.40mm thick fixed to external wall boxed out at down pipes including sills, flashing, removable sections at access points such as cleaning eyes etc. completely covering the surface as directed by the Engineer.

Sq.ft. 235.00

Y14 Supply and lay aluminium foil heat reflecting material double side and fire proof at underside of roof supported at 2"x 2" mesh.

Sqr. 2390.00

Y15 Supply and fix zinc alum profile sheet (minimum base metal thickness of 0.4mm and minimum thickness of 0.47mm laid on existing purling of joints to be properly connected with an adequate side slope and to ensure water tightness along the entire length and complete to working order.

Sqr. 23530.00

Y15 Supply and installation of Galvanize iron "C" channels 125 x 50 x 20 x 2.3mm thick

L.ft. 210.00

Y16 Supply and fixing double angle sleepers size 2" x 2" x 1/4" L.ft. 570.00

Y17 Supply and fixing double angle sleepers size 21/2" x 21/2" x 1/4"

L.ft. 610.00

Y18 Supply and fixing double angle sleepers size 3x3x1/4 L.ft. 670.00 Z-MAINTAINED WORK

Z01. Demolishing reinforced cement concrete in suspended floors 4" thick , removing reinforcement and clearing debris.

Cube 14275.00

Z02. Demolishing cement concrete and clearing debris in 6" thick floors.

Cube 6590.00

Z03 Demolishing reinforced cement, concrete in lintol of 9"x6" removing reinforcement and clearing debris.

L.ft 34.00

Z04. Demolishing reinforced cement, concrete in lintol of 4 1/2"x6" removing reinforcement and clearing debris.

L.ft 28.00

Z05. Demolishing brick work in cement , stacking brick and clearing debris away.

Cube. 930.00

Z06. Demolishing 9" thick brick in cement" stacking brick and clearing debris away.

Cube 1130.00

Z07. Demolishing 4 1/2" thick brick in cement stacking brick and clearing debris away.

Sqr. 425.00

Z08. Demolishing drains and clearing debris. L.ft 21.00 Z09. Demolishing 3" thick floors brick paved and clearing debris

away.Sqr. 550.00

Z10. Demolishing rubble masonry is cement. Stacking rubble and clearing debris

Cube 1510.00

Z11. Removing and stacking door sash only up to 40 S.ft from existing walls.

No 100.00

Z12. Removing and stacking door sash only over 40 S.ft from existing walls.

No 150.00

Z13. Removing and stacking door frame size up to 40 S.ft from existing walls.

No 730.00

Z14. Removing and stacking door frame size over 40 S.ft from existing walls.

No 1100.00

Z15 Removing and stacking window sash only up to 40 S.ft from existing walls.

No 100.00

Z16. Removing and stacking window sash only over 40 S.ft from existing walls.

No 150.00

Z17. Existing door or window frames renewing in short lengths with class I timber.

L.ft 360.00

Z18. Removing damage sashes for door or window and preparing and re-fixing.

Per sash 210.00

Z19. Removing and stacking glass panes in doors and windows and fanlight.

S.ft 38.00

Z20. Door or window frame altering existing rebate fillet using class I timber with screws and fixing available sashes.

No 180.00

Z21. Removing ceiling asbestos including timber frame work, stacking serviceable materials and clearing debris away in single storied building.

Sqr. 870.00

Z22. Removing ceiling asbestos including timber frame work, stacking serviceable materiel and clearing debris away in two storied building.

Sqr. 1245.00

Z23. Removing ceiling timber frame work, (asbestos sheet not available) stacking serviceable materiel and clearing debris away in single storied buildings.

Sqr. 150.00

Z24. Removing ceiling timber frame work, serviceable materiel and clearing debris away in two storied buildings.

Sqr. 190.00

Z25. Beading , Halmilla 1 1/2" by 1/ 2" thick plain chamfering supplying and fixing complete with brass screws.

L.ft 58.00

Z26. Removing and stacking valance, Barge board materials and clearing debris away in single storied building.

L.ft 8.00

Z27. Removing and stacking valance , Barge board materials and clearing debris away in two storied building.

L.ft 12.00

Z28. Removing and stacking trellis work Sqr. 828.00

Z29. Trelling work with 1/2"x1/2" laths fixing 2" apart diagonally, horizontally or vertically on existing timber framing.

S.ft 443.00

Z30. Door or window easing only Per sash 93.00

Z31. Boards, barge, Valance, fascia available, fixing including cutting and minor repairs.

L.ft 29.00

Z32. Removing and stacking tile calicut or half round from roof of single storied building.

Sqr. 366.00

Z33. Removing and Stacking tile Calicut or half round from 2 Storied building.

Sqr. 565.00

Z34. Removing and stacking calicut type ridge tile. Sqr. 46.00 Z35. Removing and stacking corrugated asbestos sheet from roof of

single storied building.Sqr. 370.00

Z36. Removing and stacking corrugated asbestos sheet from roof of two storied building.

Sqr. 414.00

Z37. Removing and stacking corrugated asbestos sheet from roof of three storied building.

Sqr. 402.00

Z38. Reapers , available fixing with wire nails. L.ft 12.00 Z39. Timber available, sorted out cur to required size and fixing in

roof and other carpentry work.C.ft 425.00

Z40. Ridging (available of site) tiles bedded in lime cement motor 1:1:4 and coloured to match tiles.

L.ft 56.00

Z41. Corrugated asbestos sheet (corrugated sheet available) fixed with hook, bolts and nuts to roofing.

Sqr. 1235.00

Z42. Removing existing ceiling stacking materials and clearing debris.

Sqr. 485.00

Z43. Ceiling board 6"x5/8" to 3/4" lunumidella renewing in small quantities rate to include for scaffolding (up to 30 L.ft)

L.ft 93.00

Z44. Ceiling lunumidella, available at site fixing with new wire nails.

Sqr. 1282.00

Z45. Removing and stacking gutter, eaves from roof of single strayed buildings.

L.ft 9.00

Z46. Removing and stacking gutter eaves from roof of two storied building.

L.ft 14.00

Z47. Removing and stacking down pipes from roof single storied building.

L.ft 9.00

Z48. Removing and stacking down pipe from roof of two storied building.

L.ft 12.00

Z49. Removing and stacking G.I. Valley gutter and flashing. L.ft 21.00 Z50. Refixing existing G.I. Valley gutter and flashing including

making good.L.ft 105.00

Z51. Existing gutter and down pipe making and fixing complete including brackets.

L.ft 21.00

Z52. Chipping cement rendering and clearing debris away from floors.

Sqr. 757.00

Z53. Demolishing floor tiles and clearing debris. Sqr. 990.00 Z54. Demolishing wall tiles and clearing debris. Sqr. 990.00 Z55. Chipping cement plastering and clearing debris away from

brick walls.Sqr. 554.00

Z56. Chipping lime plastering and clearing debris away. Sqr. 180.00 Z57. Removing painting from walls and clearing debris away. Sqr. 250.00 Z58. Chipping cement plaster sofit & clearing away debris Sqr. 700.00 Z59. Removing enamel paint from door and window frame and

clearing debris away.Sqr. 245.00

Z60. Painting ceiling beading 2 coats. L.ft 12.00 Z61. Paint removing from painted glass panes with caustic soda

solution or other paint remover.S.ft 21.00

Z62. Removing basin , sink or urinals including all fittings and making walls good.

No 605.00

Z63. Removing closet squatting type plugging sewer connection and floor made good.

No 880.00

Z64. Flushing cistern disconnection, removing and plugging water connection and making good all damage to wall and floor etc.

No 320.00

Z65. Supply and fixing ball value etc. No 320.00 Z66. Removing locks, brass bib ,push or stop lock 1/2" to 1 1/2" No 30.00

Z67. Repairing locks, bib or stop by fixing leather washers. No 75.00

Z68. Repairing pillar Locks, fixed to basin carefully without damage to basin.

No 150.00

Z69. Fixing basin lavatory existing brackets (Tap , waste tap and basin available)

No 480.00

Z70. Removing existing locks Mortice re pairing and re-fixing. No 415.00 Z71 Removing water proof treatment or hot bitumen from floors or

flat roof and clearing away debris.S.qr 1000.00

Z72 Fixing of wash basin, leveling and connecting tom existing water service and making good (basin, bracket and fitting available)

No 550.00

Z73 Transporting debris cleared away from site by tractor (approx.. 10 Miles away).

Load 2000.00

Z74 Transporting debris cleared away from site by 3.5 Cubes capacity heavy vehicle. Rate to inclusive of loading with JCB machine (approx.. 20 Miles away).

Load 4000.00

AA MISCELLANEOUS

The following items are exclusively for estimating purposes for which a standard work norm is not immediately available and at the same time it is impossible to arrive at a realistic break-up of labour component involved at the time of preparation of the estimate. The rate is not to be used for engaging labourers on routine work and the mere appearance of this rate on BSR is not a sanction to pay the daily labourers at this rate. Skilness of the Craftman to be verified by a trade test certificate at the time of engagement.

AA1 Engaging special skilled labour services in the trades of fitter, electrician, welder, mason, carpenter, bar bender, painter

Per 8 Hour

day Per Person

885.00

AA2 Engaging labour services in un-skilled category of any type of manual work

Per 8 Hour

day Per Person

732.00

AA3 Pumping water using 2" dia. water pump. Per Day 2440.00

Chain Link FenceAA4 Supplying & fixing PVC chain link fence (2"x 2") gauge 8

height of 10'0" for GI pipe fixed (GI pipe measured separately) with available 3/4"x 1/4" flat iron (flat iron measured separately) complete with tension J bolts and tension cords.

Sq.ft. 96.00

AA5 Supplying & fixing PVC chain link fence (2"x 2") gauge 10 height of 10'0" for GI pipe fixed (GI pipe measured separately) with available 3/4"x 1/4" flat iron (flat iron measured separately) complete with tension J bolts and tension cords.

L.ft. 83.00

AA6 Supplying and fixing 3" dia. Medium quality GI pipe 10') height with excavation 1'0"x 1'0"x 3'0" cement concrete base 1:2 1/2:5 (1") with 1/2" dia. MS rods welded to bottom of G.I. Pipe and drilling 9 Nos. holes to fixed the chain link (chain link measured separately) and fiberglass coping on top. Rate to include for painting one coat of anticorrosive and two coats of enamel paint.

L.ft. 860.00

AA7 Supplying and fixing 3" dia. Medium quality GI pipe 8'0" height with excavation 1'0"x 1'0"x 3'0" cement concrete base 1:2 1/2:5 (1") with 1/2" dia. MS rods welded to bottom of G.I. Pipe and drilling 7 Nos. holes to fixed the chain link (chain link measured separately) and fiberglass coping on top. Rate to include for painting one coat of anticorrosive and two coats of enamel paint.

L.ft. 785.00


L.ft 465.00


L.ft. 485.00

AA10 Supplying and fixing 3/4"x 1/4" flat iron to existing GI pipe (GI pipe measured separately) to fix the chain link and drilling 09 Nos. holes. Rate to include for one coat of anticorrosive paint and two coats of enamel paint .

L.ft. 140.00

AA11 Supplying and fixing 1 1/4"x 1 1/4"x 1/4" angle iron horizontal bracings welded to existing GI pipes including one coat of anticorrosive and two coats of Enamel paint

L.ft. 210.00

Documents

BSR 2008