BS identifier BS Title Committee Status Final Review Outcomeshop.bsigroup.com/upload/269574/BSI-standards...1452-4:1999 and BS EN 1452-5:1999 Reconfirm BS 8303-1:1994 Installation

Email your comments to: [email protected] Your email subject line: eg: 2015 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee

Page 1 of 18 May 2015

BS identifier BS_Title Committee Status Final Review

Outcome

BS A 400:2010 Specification for nuts, plain and slotted (unified hexagons and unified threads) for shear bolts for aircraft in corrosion-resisting steel

ACE/12 current

BS 2A 260-2A 265:2010 Specification for pan and 100$0D countersunk slotted head screws with ISO metric screw threads

ACE/12 current Confirm

BS 6S 100:2010 Aerospace series. Procedure for inspection, testing and acceptance of wrought steels (other than plate, sheet, strip and tube)


BS 2HC 100:2010 Procedure for inspection, testing and acceptance of iron, nickel, copper, cobalt and refractory metal base alloy castings


BS 5T 100:2010 Aerospace series. Procedure for inspection, testing and acceptance of seamless steel tubes and tubestock


BS 4S 500:2010 Aerospace series. Procedure for inspection, testing and acceptance of steel sheet and strip


BS 4HR 601:2010 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture of fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4)

ACE/61/-/48 current Confirm

BS 2HR 505:2010 Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire with a maximum diameter of 2 mm for thread inserts (nickel base Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70)


BS 2HR 55:2010 Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)


BS 2HR 10:2010 Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)


BS 2HR 3:2010 Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2)


BS 2HR 51:2010 Specification for high expansion heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Solution treated at 980 $0DC)


BS 2HR 6:2010 Specification for nickel-chromium- iron-

molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)


BS 2HR 4:2010 Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)





Outcome

BS 2HR 53:2010 Specification for nickel-iron-chromium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 42.5, Cr 12.5, Mo 5.8, Ti 3.0, Fe remainder)


BS 2HR 40:2010 Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base Cr 20, W 15, Ni 10, Mn 1.5)


BS 3HR 1:2010 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 2.2, Al 1.4)


BS 2HR 506:2010 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5, Al 1.5)


BS 2HR 5:2010 Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)


BS 2HR 52:2010 Specification for heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3)


BS 3F 128:2010 Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex)


BS 1390:1990 Specification for baths made from vitreous enamelled sheet steel

B/503 confirmed (2010) Reconfirm

BS 3402:1969 Specification for quality of vitreous china sanitary appliances


BS 1189:1986 Specification for baths made from porcelain

enamelled cast iron

B/503 partially replaced by

BS EN 232:2003

Reconfirm

BS 1521:1972 Specification for waterproof building papers B/546 current Confirm

BS 8000-16:1997+A1:2010

Workmanship on building sites -- Code of practice for sealing joints in buildings using sealants

B/547 partially replaced by BS 8000-0:2014

Reconfirm

BS 6213:2000+A1:2010 Selection of construction sealants. Guide B/547 current Confirm

BS 5502-50:1993+A2:2010

Buildings and structures for agriculture -- Code of practice for design, construction and use of storage tanks and reception pits for livestock slurry

B/549 current Confirm

BS 8204-1:2003+A1:2009

Screeds, bases and in situ floorings -- Concrete bases and cementitious levelling screeds to receive floorings. Code of practice

CB/300 current Confirm

BS 8204-6:2008+A1:2010

Screeds, bases and in situ floorings -- Synthetic resin floorings. Code of practice


BS 5550-2.11.2:1980 Cinematography. 16 mm film. Spindles -- Specification for dimensions of precision grade spindles for 16 mm cinematograph equipment and telecine machines

CPW/36 partially replaced by BS 5550-2.11.1:1978

BS 8519:2010 Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications. Code of practice

FSH/1 current Confirm




Outcome

BS 5482-1:2005 Code of practice for domest butane- and propane-gas-burning install's – Install’s at perm dwellings, residential prk homes and commercial prem’s, with install’n pipework sizes not exceeding DN 25_steel and DN 28_corrugated stainless steel or copper

GSE/24 confirmed (2010)

BS 5885-2:1987 Automatic gas burners -- Specification for packaged burners with input rating 7.5 kW up to but excluding 60 kW

GSE/27 partially replaced by BS EN 676:1997

Withdraw

BS 5885-1:1988 Automatic gas burners -- Specification for burners with input rating 60 kW and above

GSE/27 partially replaced by BS EN 676:1997

Withdraw

BS 6580:2010 Specification for corrosion inhibiting, engine coolant concentrate ("antifreeze")

I/- current Withdraw

BS 4971:2002 Repair and allied processes for the conservation of documents. Recommendations

IDT/2/9 confirmed (2008) Reconfirm

BS 6200-3.0:2002 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis -- Reference methods of analysis. Summary of methods

ISE/102 confirmed (2008) Reconfirm

BS 6200-2.1:1993 Sampling and analysis of iron, steel and other ferrous metals. Sampling and sample preparation -- Methods for iron and steel


BS 8766:2004 Names and identifiers of individuals and groups. Data structure for interoperability. Specification

IST/36 confirmed (2010) Withdraw

BS 6811-1.1:1987 Winding wires. Basic dimensions -- Specification for diameters of conductors for round winding wires

L/-/99 obsolescent (2008) Withdraw

BS 826:1978 Specification for steel single tier bolted shelving (angle upright type)

MHE/8 confirmed (2008) Withdraw

BS 4680:1996 Specification for clothes lockers MHE/8 confirmed (2008) Reconfirm

BS 4345:1968 Specification for slotted angles MHE/8 confirmed (2008) Withdraw

BS 8438:2004+A1:2010 Troughed belt conveyors. Specification MHE/9 current Confirm

BS 4607-5:1982+A3:2010

Non-metallic conduit fittings for electrical installations -- Specification for rigid conduits, fittings and boxes of insulating material

PEL/213 current Confirm

BS 4607-1:1984+A2:2010

Non-metallic conduits and fittings for electrical installations -- Specification for fittings and components of insulating material


BS 31:1940 Specification. Steel conduit and fittings for electrical wiring

PEL/213 obsolescent (2011) Withdraw

BS 7825-3.6:1997 Calibration of rubber and plastics test equipment. Calibration schedules -- Dimensional properties

PRI/20 obsolescent (2008) Withdraw

BS 6996:2003 Mineral oil resistant acrylonitrile-butadiene rubber compounds. Specification

PRI/54 confirmed (2008) Reconfirm

BS 3227:2003 Butyl rubber compounds (including halobutyl compounds). Specification


BS 6014:2003 Ethylene propylene rubber compounds. Specification





Outcome

BS 2752:2003 Chloroprene rubber compounds. Specification PRI/54 confirmed (2008) Reconfirm

BS 1154:2003 Natural rubber compounds. Specification PRI/54 confirmed (2008) Reconfirm

BS 7619:2010 Extruded cellular unplasticized white PVC (PVC-UE) profiles. Specification

PRI/82 current Confirm

BS 7291-3:2010 Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings -- Specification for crosslinked polyethylene (PE-X) pipes and associated fittings

PRI/88 current

BS 7291-2:2010 Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings -- Specification for polybutylene (PB) pipe and associated fittings

PRI/88 current

BS 7291-1:2010 Thermoplastics pipe and fitting systems for hot

and cold water for domestic purposes and heating installations in buildings -- General requirements

PRI/88 current

BS 3505:1986 Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water

PRI/88 replaced by BS EN 1452-1:1999, BS EN 1452-2:1999, BS EN 1452-3:1999, BS EN 1452-4:1999 and BS EN 1452-5:1999

Reconfirm

BS 8303-1:1994 Installation of domestic heating and cooking appliances burning solid mineral fuels -- Installation of domestic heating and cooking appliances burning solid mineral fuels. Specification for the design of installations

RHE/28 current

BS 8511:2010 Code of practice for the installation of solid fuel heating and cooking appliances in small craft

RHE/28/-/1 current Confirm

BS 5073:1982 Guide to stowage of goods in freight containers TW/1 confirmed (2008)

BS 5380:1984 Specification for hydraulic port and stud coupling using 'O'-ring sealing and 'G' series fastening threads

MCE/18 confirmed (2010) Reconfirm

BS 8465:2010 Hydraulic fluid power. Monitoring the level of particulate contamination. Comparison membrane technique

MCE/18 current Confirm

BS 6537:1984 Specification for staple type connectors for hydraulic fluid power applications


BS 5200:1997 Specification for dimensions of hydraulic connectors and adaptors


BS 4521-3.2:1975 Specification for railway turnouts for private users. Medium grade turnouts over which British

Railways locomotives do not operate, for axle loads not exceeding 25 tons -- Turnouts using flat bottom rails

RAE/2 confirmed (2010) Withdraw

BS 4521-3.1:1974 Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons -- Turnouts using bull head rail





Outcome

BS 4521-4:1975 Specification for railway turnouts for private users -- Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails


BS 4521-2:1975 Specification for railway turnouts for private users -- Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails


BS 4521-1.2:1971 Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate -- Turnouts using flat bottom rail


BS 4521-1.1:1971 Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate -- Turnouts using bull head rails


BS 64:1992 Specification for normal and high strength steel bolts and nuts for railway rail fishplates

RAE/2 confirmed (2010) Reconfirm

BS 7865:1997 Specification for steel electrical conductor rail for railway motive power supply


BS 47-1:1991 Fishplates for railway rails -- Specification for rolled steel fishplates


BS 5892-3:1992+A2:2009

Railway rolling stock materials -- Specification for monobloc wheels for traction and trailing stock

RAE/3/-/1 confirmed (2010) Reconfirm

BS 5892-6:1992 Railway rolling stock materials -- Specification for wheelsets for traction and trailing stock


BS 5892-2:1992 Railway rolling stock materials -- Specification for forged and rolled wheel centres


BS 5892-4:1992 Railway rolling stock materials -- Specification for

forged and rolled tyres


BS AU 170:1979 Methods for measurement of reflectance of rear view mirrors

AUE/12 confirmed (2010) Reconfirm

BS 5395-1:2010 Stairs -- Code of practice for the design of stairs with straight flights and winders


BS 6465-4:2010 Sanitary installations -- Code of practice for the provision of public toilets

B/209/-/2 current Reconfirm

BS 3998:2010 Tree work. Recommendations B/213 current Confirm

PD 6682-7:2003 Aggregates -- Armourstone. Guidance on the use of BS EN 13383


BS 8427:2004 Jug water filter systems. Specification B/504 confirmed (2010) Reconfirm

BS 5911-1:2002+A2:2010

Concrete pipes and ancillary concrete products -- Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and

fittings with flexible joints (complementary to BS EN 1916:2002)

B/505 current

BS 5911-4:2002+A2:2010

Concrete pipes and ancillary concrete products -- Specification for unreinforced and reinforced concrete inspection chambers (complementary to BS EN 1917:2002)


BS 65:1991 Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings





Outcome

BS 5911-5:2004+A1:2010

Concrete pipes and ancillary concrete products -- Specification for prestressed non-pressure pipes and fittings with flexible joints


BS 5911-6:2004+A1:2010

Concrete pipes and ancillary concrete products -- Specification for road gullies and gully cover slabs

B/505 current

BS 9295:2010 Guide to the structural design of buried pipelines B/505 current

BS 6999:1989 Specification for vitreous-enamelled low-carbon-steel flue pipes, other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW

B/506 confirmed (2010)

BS 41:1973 Specification for cast iron spigot and socket flue or smoke pipes and fittings


BS 567:1973 Specification for asbestos-cement flue pipes and fittings, light quality


BS 835:1973 Specification for asbestos-cement flue pipes and fittings, heavy quality


BS 5854:1980 Code of practice for flues and flue structures in buildings


BS 7533-7:2010 Pavements constructed with clay, natural stone or concrete pavers -- Code of practice for the construction of pavements of natural stone paving units and cobbles, and rigid construction with concrete block paving


BS 7533-10:2010 Pavements constructed with clay, natural stone or concrete pavers -- Guide for the structural design of trafficked pavements constructed of natural stone setts and bound construction with concrete paving blocks


BS 7533-9:2010 Pavements constructed with clay, natural stone or concrete pavers -- Code of practice for the construction of rigid pavements of clay pavers


BS 598-110:1998 Sampling and examination of bituminous mixtures for roads and other paved areas -- Methods of test for the determination of wheel-tracking rate and depth

B/510/1 current Confirm

BS 598-112:2004 Sampling and examination of bituminous mixtures for roads and other paved areas -- Method for the use of road surface hardness probe

B/510/2 confirmed (2010) Reconfirm

BS 5507-1:1977 Methods of test for falsework equipment -- Floor centres


BS 5507-3:1982 Methods of test for falsework equipment -- Props B/514 partially replaced by BS EN 1065:1999

BS 6037-2:2004 Code of practice for the planning, design,

installation and use of permanently installed access equipment -- Travelling ladders and gantries

B/514/39 confirmed (2010)

BS 5974:2010 Code of practice for the planning, design, setting up and use of temporary suspended access equipment

B/514/39 current

BS 6089:2010 Assessment of in-situ compressive strength in structures and precast concrete components. Complementary guidance to that given in BS EN 13791





Outcome

BS 4315-2:1970 Methods of test for resistance to air and water penetration -- Permeable walling constructions (water penetration)


BS 493:1995+A1:2010 Specification for airbricks and gratings for wall ventilation


BS 5977-1:1981 Lintels -- Method for assessment of load B/519/3 confirmed (2010) Reconfirm

BS 8000-2.2:1990 Workmanship on building sites. Code of practice for concrete work -- Sitework with in situ and precast concrete

B/525/2 partially replaced by BS 8000-0:2014

Withdraw

PD 6687-1:2010 Background paper to the National Annexes to BS EN 1992-1 and BS EN 1992-3


PD 6697:2010 Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2

B/525/6 current

BS 8008:1996+A1:2008 Safety precautions and procedures for the

construction and descent of machine-bored shafts for piling and other purposes


CP 2012-1:1974 Code of practice for foundations for machinery -- Foundations for reciprocating machines

B/526 confirmed (2010) Withdraw

BS 1377-6:1990 Methods of test for soils for civil engineering purposes -- Consolidation and permeability tests in hydraulic cells and with pore pressure measurement


BS 1377-5:1990 Methods of test for soils for civil engineering purposes -- Compressibility, permeability and durability tests


BS 1377-1:1990 Methods of test for soils for civil engineering purposes -- General requirements and sample preparation


BS 1377-8:1990 Methods of test for soils for civil engineering purposes -- Shear strength tests (effective stress)


BS 1377-3:1990 Methods of test for soils for civil engineering purposes -- Chemical and electro-chemical tests


BS 1377-7:1990 Methods of test for soils for civil engineering purposes -- Shear strength tests (total stress)


BS 1377-4:1990 Methods of test for soils for civil engineering purposes -- Compaction-related tests


BS 5930:1999+A2:2010 Code of practice for site investigations B/526/3 partially replaced by BS EN ISO 14688-1:2002, BS EN ISO 14688-2:2004, BS EN ISO 14689-1:2003, BS EN ISO

22475-1:2006, BS EN ISO 22476-2:2005, BS EN ISO 22476-3:2005, BS EN 1997-2:2007, BS EN ISO 22282-1:2012, BS EN ISO 22282-2:2012, BS EN ISO 22282-3:2012, BS EN ISO 22282-4:2012, BS EN ISO 22282-5:2012, BS EN ISO



22282-6:2012, BS EN ISO 22476-

1:2012, BS EN ISO 22476-7:2012, BS EN ISO 22476-5:2012 and BS EN ISO 22476-4:2012

BS 8006-1:2010 Code of practice for strengthened/reinforced soils and other fills

B/526/4 current

BS 7722:2010 Surface covered PVC-U profiles for windows and doorsets. Specification


BS 6510:2010 Steel-framed windows and glazed doors. Specification


BS 4787-1:1980 Internal and external wood doorsets, door leaves and frames -- Specification for dimensional requirements


BS 8529:2010 Composite doorsets. Domestic external doorsets. Specification

B/538/2 current

BS 8530:2010 Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification


BS 8298-4:2010 Code of practice for the design and installation of natural stone cladding and lining -- Rainscreen and stone on metal frame cladding systems


BS 8298-3:2010 Code of practice for the design and installation of natural stone cladding and lining -- Stone-faced pre-cast concrete cladding systems


BS 8298-2:2010 Code of practice for the design and installation of natural stone cladding and lining -- Traditional handset external cladding


BS 8298-1:2010 Code of practice for the design and installation of

natural stone cladding and lining -- General


BS 8300:2009+A1:2010 Design of buildings and their approaches to meet the needs of disabled people. Code of practice

B/559 current

BS 8493:2008+A1:2010 Light reflectance value (LRV) of a surface. Method of test


PD 25666:2010 Business continuity management. Guidance on exercising and testing for continuity and contingency programmes

BCM/1 current Confirm

PD 25111:2010 Business continuity management. Guidance on human aspects of business continuity

BCM/1 current Confirm

PD 6612:2004 Guidance on the preparation of codes of practice for building


BS 6100-0:2010 Building and civil engineering. Vocabulary -- Introduction and index

CB/101/-/2 current Confirm

BS 6349-2:2010 Maritime works -- Code of practice for the design of quay walls, jetties and dolphins


BS 8525-1:2010 Greywater systems -- Code of practice CB/506 current Confirm

BS 5682:1998 Specification for probes (quick connectors) for use with medical gas pipeline systems

CH/121/1 current

BS 6788-2:1990 Neurosurgical implants -- Specification for marking and packaging of implantable neural stimulators

CH/150/2 confirmed (2010) Reconfirm




Outcome

BS 2738-3:2004+A1:2008

Spectacle lenses -- Specification for the presentation of prescriptions and prescription orders for ophthalmic lenses

CH/172/3 confirmed (2010) Reconfirm

BS 6734:2004 Antimicrobial efficacy of disinfectants for veterinary and agricultural use. Method

CH/216 confirmed (2010) Reconfirm

BS 7114-3:1988 Fireworks -- Methods of test for fireworks CII/47 partially replaced by BS EN 14035 parts and DD 14035:2007

Reinstate

BS 7114-1:1988 Fireworks -- Classification of fireworks CII/47 obsolescent (2010) Reinstate

BS 7114-2:1988 Fireworks -- Specification for fireworks CII/47 obsolescent (2010) Reinstate

BS 5285:1975 Specification. Performance of a.c. electric ventilating fans and regulators for non-industrial use

CPL/59 confirmed (2010) Reconfirm

BS 8423:2010 Fireguards for fires and heating appliances for domestic use. Specification

CW/1 current

BS 8580:2010 Water quality. Risk assessments for Legionella control. Code of practice

EH/3/4 current Confirm

BS 5266-6:1999 Emergency lighting -- Code of practice for non-electrical low mounted way guidance systems for emergency use. Photoluminescent systems

EL/1/1 confirmed (2010)

BS 5266-4:1999 Emergency lighting -- Code of practice for design, installation, maintenance and use of optical fibre systems

EL/1/1 confirmed (2010) Reconfirm

BS 5266-2:1998 Emergency lighting -- Code of practice for electrical low mounted way guidance systems for emergency use

EL/1/1 confirmed (2010)

BS 5266-5:1999 Emergency lighting -- Specification for component parts of optical fibre systems

EL/1/1 confirmed (2010) Reconfirm

BS 5489-2:2003+A1:2008

Code of practice for the design of road lighting -- Lighting of tunnels

EL/1/2 current

BS 6657:2002 Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation. Guide

EXL/31 replaced by PD CLC/TR 50426:2004

Confirm

BS 6656:2002 Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide


Withdraw

BS 5958-1:1991 Code of practice for control of undesirable static electricity -- General considerations


Withdraw

BS 7371-4:1994 Coatings on metal fasteners -- Specification for electroplated nickel, nickel/chromium and copper/nickel/chromium coatings

FME/9 confirmed (2010) Reconfirm

BS 7371-7:2010 Coatings on metal fasteners -- Specification for mechanically applied zinc and zinc based coatings

FME/9 current Confirm

BS 7805-2:1997 Swaged collar grooved rivets -- Specification for sizes from 12.7 mm up to and including 34.9 mm


BS 7855-1:1996 Metric rivets for the attachment of friction linings -- Specification for semi-tubular rivets


BS 4933:2010 Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts

FME/9 current Confirm




Outcome

BS 7805-1:1995 Swaged collar grooved rivets -- Specification for sizes up to and including 10 mm diameter


BS 7371-9:1996 Coatings on metal fasteners -- Specification for phosphate or phosphate and oil coatings


BS 7371-2:1993 Coatings on metal fasteners -- Specification for torque/clamping force relationship


BS 4894:1993 Specification for bifurcated rivets for general purpose use (metric series)


BS 7371-10:1994 Coatings on metal fasteners -- Specification for organic coatings


BS 5346:1976 Specification. ISO metric trapezoidal screw threads


BS 641:1951 Dimensions of small rivets for general purposes FME/9 obsolescent (2010) Withdraw

BS 1726-1:2010 Cylindrical helical springs made from round wire

and bar. Guide to methods of specifying and tolerancing hot coiled springs, and cold coiled springs not covered by BS EN 15800, and general spring testing -- Compression springs

FME/9/3 current Confirm

BS 8536:2010 Facility management briefing. Code of practice FMW/1 current

PD 6531:2010 Queries and interpretations on BS 5839-1 FSH/12/1 current Confirm

PD 6512-3:1987 Use of elements of structural fire protection with particular reference to the recommendations given in BS 5588 'Fire precautions in the design and construction of buildings' -- Guide to the fire performance of glass


BS 1635:1990 Recommendations for graphic symbols and abbreviations for fire protection drawings


BS 9999:2008 Code of practice for fire safety in the design, management and use of buildings

FSH/14 current Under revision

BS 7899-2:1999 Code of practice for assessment of hazard to life and health from fire -- Guidance on methods for the quantification of hazards to life and health and estimation of time to incapacitation and death in fires

FSH/16 confirmed (2010) Reconfirm

PD 6503-2:1988 Toxicity of combustion products -- Guide to the relevance of small-scale tests for measuring the toxicity of combustion products of materials and composites


BS 7899-1:1997 Code of practice for assessment of hazard to life and health from fire -- General guidance


BS 336:2010 Specification for fire hose couplings and ancillary equipment

FSH/17/8 current Confirm

BS 6165:2002 Specification for small disposable fire extinguishers of the aerosol type


BS 476-6:1989+A1:2009

Fire tests on building materials and structures -- Method of test for fire propagation for products


BS 476-3:2004 Fire tests on building materials and structures -- Classification and method of test for external fire exposure to roofs

FSH/22/-/8 current Confirm

BS 7346-4:2003 Components for smoke and heat control systems -- Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires. Code of practice

FSH/25 confirmed (2008)




Outcome

BS 4875-8:1998 Furniture. Strength and stability of furniture -- Methods for determination of stability of non-domestic storage furniture

FW/0/2 confirmed (2010) Withdraw

BS 5459-2:2000+A2:2008

Specification for performance requirements and tests for office furniture -- Office pedestal seating for use by persons weighing up to 150kg and for use up to 24 hours a day, including type-approval tests for individual components

FW/0/3 confirmed (2010) Reconfirm

BS 6807:1986 Methods of test for the ignitability of mattresses with primary and secondary sources of ignition

FW/6 replaced by BS 6807:1990

Confirm

BS 8491:2008 Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems

GEL/20/18 current Confirm

BS 7967-5:2010 CO2 in dwellings and other premises and combustion performance of gas-fired appliances - Guide for using electronic portable combustion gas analysers in non-domestic premises for measurement of CO and CO2 and determination of combustion performance

GSE/30 current Confirm

BS 5546:2010 Specification for installation and maintenance of gas-fired water-heating appliances of rated input not exceeding 70 kW net

GSE/30 current Confirm

BS 6172:2010 Specification for installation, servicing and maintenance of domestic gas cooking appliances (2nd and 3rd family gases)

GSE/30/-/10 current Confirm

BS 5864:2010 Installation and maintenance of gas-fired ducted

air heaters of rated heat input not exceeding 70 kW net (2nd and 3rd family gases). Specification

GSE/30/-/7 current Confirm

DD 263:2010 Intruder and hold-up alarm systems. Commissioning, maintenance and remote support. Code of practice

GW/1/2 current

PD 6662:2010 Scheme for the application of European standards for intrusion and hold-up alarm systems

GW/1/2 current

BS 8517-2:2010 Security dogs -- Code of practice for the use of detection dogs

GW/3 current

BS 7659:1994 Specification for dog muzzles GW/3 confirmed (2010) Reconfirm

PD 0018:2001 Information management systems. Building systems fit for audit

ICT/- confirmed (2010) Reconfirm

BS 4811:1972 Specification for the presentation of research and development reports

IDT/2 confirmed (2010) Reconfirm

PD 0017:2001 Business documents. Guidance on effective layout and presentation

IDT/2 confirmed (2010) Reconfirm

BS 2979:1958 Transliteration of Cyrillic and Greek characters IDT/2 confirmed (2010) Reconfirm

BS 4812:1972 Specification for the romanization of Japanese IDT/2 confirmed (2010) Reconfirm

BS 7581:1992 Guide to presentation of tables and graphs IDT/2 confirmed (2010) Reconfirm

BS 4280:1968 Transliteration of Arabic characters IDT/2 confirmed (2010) Reconfirm

BS 7014:1989 Guide to the romanization of Chinese IDT/2 confirmed (2010) Reconfirm




Outcome

BS 5605:1990 Recommendations for citing and referencing published material


BS 6371:1983 Recommendations for citation of unpublished documents


BS 7448-3:2005 Fracture mechanics toughness tests -- Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1

ISE/101 current Confirm

BS 7448-4:1997 Fracture mechanics toughness tests -- Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials


BS 131-7:1998 Notched bar tests -- Specification for verification of the test machine used for precision determination of Charpy V-notch impact energies

for metals


BS 131-6:1998 Notched bar tests -- Method for precision determination of Charpy V-notch impact energies for metals


BS 7996:2009 Torque measuring devices. Calibration and classification using continual torque application. Method


BS 3518-1:1993 Methods of fatigue testing -- Methods of fatigue testing. Guide to general principles


BS 7270:2006 Metallic materials. Constant amplitude strain controlled axial fatigue. Method of test


BS 131-4:1972 Notched bar tests -- Calibration of pendulum impact testing machines for metals

ISE/101 partially replaced by BS EN 10045-2:1993

Withdraw

BS 6888:1988 Methods for calibration of bonded electrical resistance strain gauges


BS 8422:2003 Force measurement. Strain gauge load cell systems. Calibration method


BS 7882:2008 Method for calibration and classification of torque measuring devices


BS 3518-3:1963 Methods of fatigue testing -- Direct stress fatigue tests


BS 131-1:1961 Notched bar tests -- The Izod impact test of metals


BS 131-5:1965 Notched bar tests -- Determination of crystallinity ISE/101 confirmed (2007) Reconfirm

BS 7668:2004 Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification

ISE/103 confirmed (2010)

BS 8666:2005 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification


BS 5046:1974 Method for the estimation of equivalent diameters in the heat treatment of steel


BS 2772-2:1989 Colliery haulage and winding equipment. -- Specification for wrought steel


BS 1407:1970 Specification for high carbon bright steel (silver steel)





Outcome

BS 6404-20:1996 Magnetic materials -- Resistance and temperature classification of insulation coatings


BS 1449-1.14:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip -- Specification for hot rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes


BS 1449-1.8:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip -- Specification for hot rolled narrow strip based on formability


BS 1449-1.1:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip -- General specification


BS 4825-1:1991+A2:2009

Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for tubes

ISE/110 partially replaced by BS EN 10357:2013

Confirm

PD 0028:2002 Quantitative software management. Software measurement methods. A guide to the use of ISO/IEC and other standards for obtaining and using software measurements for product and process improvement

IST/15 confirmed (2010) Reconfirm

PD 6631:1998 Technical guide to ISO/IEC 13522-5:1997. Information technology. Coding of multimedia and hypermedia information. Support for base-level interactive applications (MHEG-5)


PD 0006:1995 Technical guide to JPEG. Digital compression of photographic images


PD 6777:2003 Guide to practical implementation of JPEG 2000 IST/37 confirmed (2010) Reconfirm

BS 8878:2010 Web accessibility. Code of practice IST/45 current Confirm

BS 2975-1:2004 Sampling and analysis of glass-making sands -- Methods for sampling and physical testing of glass-making sands

LBI/1/2 confirmed (2010) Reconfirm

BS 1428-D4:1963 Microchemical apparatus. Volumetric analysis -- Specification for capillary pipettes

LBI/1/2 confirmed (2010) Reconfirm

BS 5248:1990 Specification for aspirated hygrometer LBI/1/2 confirmed (2010) Reconfirm

BS 7121-4:2010 Code of practice for safe use of cranes -- Lorry loaders

MHE/3/11 current Confirm

BS 5656-2:2004 Escalator and moving walks. Safety rules for the construction and installation of escalators and moving walks -- Code of practice for the selection, installation and location of new escalators and moving walks

MHE/4 confirmed (2010) Reconfirm

BS 6079-1:2010 Project management -- Principles and guidelines for the management of projects

MS/2 current

BS 7000-3:1994 Design management systems -- Guide to managing service design

MS/4 current Confirm

BS 8537:2010 Copper and copper alloys. Plumbing fittings. Specification for press ends of plumbing fittings for use with metallic tubes

NFE/34/3 current

PD 6699-3:2010 Nanotechnologies -- Guide to assessing airborne exposure in occupational settings relevant to nanomaterials

NTI/1 current Confirm




Outcome

BS 7654:2010 Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture

PEL/121/1 current Confirm

BS 7657:2010 Specification for cut-out assemblies up to 100 A rating, for power supply to buildings

PEL/121/1 current

BS 7375:2010 Distribution of electricity on construction and demolition sites. Code of practice

PEL/121/2 current

BS 7647:1993 Specification for radio teleswitches for tariff and load control

PEL/13 confirmed (2010) Withdraw

BS 6626:2010 Maintenance of electrical switchgear and controlgear for voltages above 1 kV and up to and including 36 kV. Code of practice

PEL/17/1 current Confirm

BS 822-6:2004 Terminal markings for electrical machinery and apparatus -- Lead colours for rotating electrical machinery

PEL/2 confirmed (2010) Reconfirm

BS 4999-141:2004+A1:2010

General requirements for rotating electrical machines -- Specification for standard dimensions


BS 8488:2009+A1:2010 Prefabricated wiring systems intended for permanent connection in fixed installations. Specification


BS 842:1965 Specification for a.c. voltage-operated earth-leakage circuit breakers

PEL/23 confirmed (2010) Reconfirm

BS 4177:1992 Specification for cooker control units PEL/23 confirmed (2010) Reconfirm

DD 253:2001 Mouthguards for use in sport and recreation. Requirements and test methods

PH/3/11 current

BS 7971-7:2003 Protective clothing and equipment for use in violent situations and in training -- Slash resistant gloves. Requirements and test methods

PH/3/12 current Confirm

BS 7971-1:2002 Protective clothing and equipment for use in violent situations and in training -- General requirements

PH/3/12 confirmed (2007) Reconfirm

BS 8428:2004 Protective clothing. Protection against liquid chemicals. Performance requirements for chemical protective suits with liquid-tight connections between different parts of the clothing for emergency teams (type 3-ET equipment)

PH/3/3 confirmed (2010) Reconfirm

BS 8468-2:2006 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Negative pressure, air purifying devices with full face mask. Specification

PH/4 current Confirm

BS 8468-4:2008 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents -- Powered air-purifying respirators. Specification


BS 10999:2010 Specification for distress signal units for the fire and rescue service


BS 7963:2000 Ergonomics of the thermal environment. Guide to the assessment of heat strain in workers wearing personal protective equipment

PH/9 confirmed (2006) Reconfirm

BS 7915:1998 Ergonomics of the thermal environment. Guide to design and evaluation of working practices for cold indoor environments

PH/9 confirmed (2006) Reconfirm




Outcome

BS 7195:1989+A1:2010 Guide for prevention of corrosion of metals caused by vapours from organic materials

PKW/0 current Confirm

BS 2782-7:Method 720B:1979

Methods of testing plastics. Rheological properties -- Cup flow of phenolic and alkyd moulding materials


BS 1782:1951 Specification for couplings for suction and delivery hose (1$9H in. to 8 in. nominal sizes) other than fire hose couplings

PRI/66 obsolescent (2012) Reinstate

BS 2464:1954 Specification for hose couplings for petrol, oil and lubricants ($9L in. to 4 in. nominal sizes)


BS 1906:1952 Specification for hose couplings (air and water) ($9B in. to 1$9D in. nominal sizes)


BS 2952:1958 Specification for rubber hose for i.c. engine cooling systems

PRI/66 obsolescent (2012) Withdraw

CP 2010-2:1970 Code of practice for pipelines -- Design and construction of steel pipelines in land

PSE/17 confirmed (2010) Reconfirm

BS 5998:1983 Specification for quality levels for steel valve castings

PSE/18/1 confirmed (2007) Reconfirm

BS 6364:1984 Specification for valves for cryogenic service PSE/18/1 confirmed (2007) Reconfirm

BS 2000-346:1996 Methods of test for petroleum and its products -- Determination of polycyclic aromatics in unused lubricating base oils and asphaltene free petroleum fractions. Dimethyl sulphoxide extraction refractive index method

PTI/13 confirmed (2010) Reconfirm

BS 2000-272:2000 Methods of test for petroleum and its products -- Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titration method


BS 2000-450:2000 Methods of test for petroleum and its products -- Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method


BS 2000-317:1995 Methods of test for petroleum and its products -- Determination of residues in liquefied petroleum gases. Low temperature evaporation method


BS 2000-213:1993 Methods of test for petroleum and its products -- Determination of neutralization value of bitumen. Colour indicator titration method


BS 2000-456:2000 Methods of test for petroleum and its products -- Determination of potassium in gasoline. Atomic absorption spectrometry (AAS) method


BS 2000-0-1:1999 Methods of test for petroleum and its products. General introduction -- Section 0.1: Specifications - IP standard for thermometers


BS 2000-1:1995 Methods of test for petroleum and its products -- Determination of acidity, neutralization value. Colour indicator titration method


BS 2000-142:1993 Methods of test for petroleum and its products -- Determination of oxidation stability of lubricating grease. Oxygen bomb method





Outcome

BS 2000-195:1998 Methods of test for petroleum and its products -- Determination of distillation characteristics of volatile organic liquids


BS 2000-0-2:1996 Methods of test for petroleum and its products. General introduction -- Specifications for IP standard reference liquids


BS 2000-137:1993 Methods of test for petroleum and its products -- Determination of oil content of water mix metalworking oil dilutions


BS 2000-223:1993 Methods of test for petroleum and its products -- Determination of ash of petroleum products containing mineral matter


BS 2000-454:2000 Methods of test for petroleum and its products -- Determination of phosphorus in gasoline.

Spectrophotometric method


BS 2000-35:1993 Methods of test for petroleum and its products -- Determination of open flash and fire point. Pensky-Martens method


BS 2000-313:2001 Methods of test for petroleum and its products -- Determination of air release of lubricating and hydraulic oils


BS 2000-133:1993 Methods of test for petroleum and its products -- Determination of drop melting point of wax and petrolatum


BS 2000-76:1993 Methods of test for petroleum and its products -- Determination of congealing point of waxes and petrolatum


BS 2000-61:1999 Methods of test for petroleum and its products -- Determination of sulfur. High pressure combustion method


BS 2000-50:1993 Methods of test for petroleum and its products -- Determination of cone penetration of lubricating grease


BS 2000-0-4:1996 Methods of test for petroleum and its products. General introduction -- Barometric pressure corrections


BS 2000-107:1993 Methods of test for petroleum and its products -- Determination of sulfur. Lamp combustion method


BS 2000-179:1993 Methods of test for petroleum and its products -- Determination of cone penetration of petrolatum


BS 2000-12:1993 Methods of test for petroleum and its products -- Determination of specific energy


BS 5276-2:2003 Pressure vessel details (dimensions) -- Specification for saddle supports for horizontal cylindrical pressure vessels

PVE/1 confirmed (2010) Reconfirm

PD 6439:1969 A review of the methods of calculating stresses due to local loads and local attachments of pressure vessels


PD 6433:1969 Guide to the application of stress analysis to design


BS 799-5:2010 Oil burning equipment -- Carbon steel oil storage tanks. Specification

RHE/13 current Confirm




Outcome

BS 8903:2010 Principles and framework for procuring sustainably. Guide

SDS/1/3 current Confirm

BS 8431:2010 Electrical static meters for secondary metering and sub-metering. Specification

SEM/1 current Confirm

BS 4268:1967 Specification for the marking of wooden hatchway covers

SME/32 confirmed (2007) Reconfirm

PD 6461-4:2004 General metrology -- Practical guide to measurement uncertainty

SS/6 confirmed (2010) Reconfirm

BS 350:2004 Conversion factors for units SS/7 confirmed (2010) Reconfirm

BS 3900-0:2010 Methods of test for paints -- Index of test methods

STI/10 current

BS 5252:1976 Framework for colour co-ordination for building purposes

STI/14 confirmed (2010) Reconfirm

BS 5252F:1976 Colour matching fan STI/14 confirmed (2010) Reconfirm

BS 7956:2000 Specification for primers for woodwork STI/28 confirmed (2010) Reconfirm

BS 18477:2010 Inclusive service provision. Requirements for identifying and responding to consumer vulnerability

SVS/0 current

BS 11000-1:2010 Collaborative business relationships -- A framework specification

SVS/1/4 current Confirm

BS 7875:2009 Synthetic saddle trees. Specification SW/136 current Confirm

BS 7188:1998+A2:2009 Impact absorbing playground surfacing. Performance requirements and test methods

SW/65 confirmed (2010)

BS 5335-1:1991+A2:2010

Continental quilts -- Specification for quilts containing fillings other than feather and/or down

TCI/66 current Confirm

BS 5867-1:2004 Textiles and textile products. Curtains and drapes -- General requirements

TCI/66 confirmed (2010) Reconfirm

BS 2543:2004 Upholstery fabrics for end use applications. Classification


BS 7837:1996 Specification for flammability performance for textiles used in the construction of marquees and similar textile structures

TCI/66/-/8 confirmed (2008) Reconfirm

BS 4569:1983 Method of test for ignitability (surface flash) of pile fabrics and assemblies having pile on the surface

TCI/66/-/8 confirmed (2008) Reconfirm

BS 5867-2:2008 Fabrics for curtains, drapes and window blinds -- Flammabililty requirements. Specification

TCI/66/-/8 current Confirm

BS 6806:2002 Textiles. Determination of formaldehyde. Method for the determination of total and free (water extraction method) formaldehyde using chromotropic acid


BS 6701:2010 Telecommunications equipment and telecommunications cabling. Specification for installation, operation and maintenance

TCT/7 current

BS 4484-1:1969 Specification for measuring instruments for constructional works -- Metric graduation and figuring of instruments for linear measurement

TDW/4 confirmed (2010) Reconfirm

BS 8887-220:2010 Design for manufacture, assembly, disassembly and end-of-life processing (MADE) -- The process of remanufacture. Specification

TDW/4 current Confirm




Outcome

BS 7172:1989 Guide to assessment of position, size and departure from nominal form of geometric features


BS 1347:1986 Specification for architects', engineers' and surveyors' metric scale rules


BS 2459:1974 Specification for set squares (fixed and adjustable) for drawing office use


BS 959:2008 Specification for internal micrometers (including stick micrometers)


BS 1054:1975 Specification for engineers' comparators for external measurement


BS 4358:1968 Glossary of terms used in air gauging with notes on the technique


BS 1134:2010 Assessment of surface texture. Guidance and

general information


BS 2457:1975 Specification for protractors for drawing office use TDW/4 confirmed (2010) Reconfirm

BS 3459:1985 Specification for stands for drawing boards TDW/4 confirmed (2010) Reconfirm

BS 3509:1962 Specification for spirit level vials TDW/4 confirmed (2010)

BS 6381:1983 Specification for drawing boards TDW/4 confirmed (2010) Reconfirm

BS 7272-1:2008 Writing and marking instruments -- Specification for caps to reduce the risk of asphyxiation

TDW/4/-/2 current Confirm

BS 7000-2:2008 Design management systems -- Guide to managing the design of manufactured products

TDW/4/7 current Confirm

BS 2634-2:2010 Roughness comparison specimens -- Specification for spark-eroded, shot-blasted, grit-blasted and polished specimens


BS 2634-1:2010 Roughness comparison specimens -- Specification for turned, ground, bored, milled, shaped and planed specimens


BS 6072:1981 Method for magnetic particle flaw detection WEE/46 partially replaced by BS EN ISO 9934-1:2001

Reconfirm

Documents

BS identifier BS Title Committee Status Final Review Outcomeshop.bsigroup.com/upload/269574/BSI-standards...1452-4:1999 and BS EN 1452-5:1999 Reconfirm BS 8303-1:1994 Installation