Brooklyn MP35 - Blaupunkt · follow these operating instructions. Accessories Only use accessories approved by Blau-punkt. Remote control The RC 08, RC 10, RC 10 H or RC 12H (available

Radio / CD / MP3

http://www.blaupunkt.com

Brooklyn MP35 7 645 261 310

Operating instructions

01BrooklynMP35_d 19.08.2005, 14:44 Uhr1

2

12

3 5

2

10 8

1 4

11 679

01BrooklynMP35_d 19.08.2005, 14:44 Uhr2

35

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

CONTROLS1 Button to switch the device on/

off and operate the volume mutefunction.

2 button, to open the flip-re-lease control panel

3 Volume control

4 BND•TS buttonShort press: Select the FMmemory banks and the MW andLW wavebands.Long press: Start the Travelstorefunction.

5 AUDIO button to adjust thebass, treble, balance and fader.Select an equalizer preset.Activate, deactivate and adjustX-BASS.

6 Arrow buttons

7 MENU buttonShort press: Open the settingsmenu.Long press: Start the scan func-tion.

8 TRAF•RDS buttonShort press: Switch traffic-infor-mation standby on/off.Long press: Switch the RDSfunction on/off.

9 Keys 1 - 6

: DIS buttonShort press: Briefly display theclock time.Long press: Configure the dis-play.

; SRC buttonSwitch sources between radio,CD/MP3, CD changer (if con-nected) and AUX.

< button to eject a CD from thedevice (only visible when thecontrol panel is open).

02BrooklynMP35_gb 19.08.2005, 14:45 Uhr35

36

CONTENTS

Notes and accessories .......... 38Road safety ................................... 38Installation ..................................... 38Accessories .................................. 38

Detachable control panel(flip-release panel) ................ 39Theft protection ............................. 39Detaching the control panel .......... 39Attaching the control panel ........... 39Off timer ....................................... 40

Switching on/off .................... 41

Adjusting the volume ............. 42Setting the power-on volume ......... 42Quick volume reduction (mute) ..... 42Switching the confirmation beepon/off ............................................ 42Telephone audio ............................ 43

Radio mode............................ 44Adjusting the tuner settings ........... 44Switching to radio mode ............... 44RDS functions ............................... 44Selecting the waveband /memory bank ................................ 45Tuning into a station ...................... 45Setting the sensitivity of stationseek tuning ................................... 45Storing stations ............................. 46Storing stations automatically(Travelstore) .................................. 46Listening to stored stations ........... 46Scanning receivable stations(SCAN) ......................................... 46Setting the scanning time .............. 47Programme type (PTY) ................. 47Optimising radio reception ............ 48Configuring the display ................. 48

Traffic information ................. 49Switching traffic informationpriority on/off ................................ 49Setting the volume for trafficannouncements ............................. 49

CD mode ................................ 50Switching to CD mode.................. 50Selecting tracks ............................ 50Fast track selection ....................... 50Fast searching (audible) ................ 50Random track play (MIX) ............... 51Scanning tracks (SCAN) .............. 51Repeating tracks (REPEAT) .......... 51Pausing playback (PAUSE) ........... 51Configuring the display ................. 51Displaying CD text ........................ 52Traffic announcements inCD mode ...................................... 52Ejecting a CD ............................... 52

MP3 mode .............................. 53Preparing an MP3-CD .................. 53Switching to MP3 mode ................ 54Configuring the display ................. 54Selecting a directory ..................... 55Selecting tracks/files ..................... 55Fast searching .............................. 55Random track play (MIX) ............... 55Scanning tracks (SCAN) .............. 56Repeating individual tracks orwhole directories (REPEAT) .......... 56Pausing playback (PAUSE) ........... 56


37

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

CONTENTS

CD-changer mode ................. 57Switching to CD-changer mode .... 57Selecting CDs .............................. 57Selecting tracks ............................ 57Fast searching (audible) ................ 57Configuring the display ................. 57Repeating individual tracks orwhole CDs (REPEAT) ................... 57Random track play (MIX) ............... 58Scanning all the tracks on allthe CDs (SCAN) ........................... 58Pausing playback (PAUSE) ........... 58

Remote control ...................... 59

CLOCK time ........................... 59Displaying the clock time .............. 59Setting the clock time ................... 59Selecting 12/24-hour clock mode . 59Displaying the time continuouslywhen the device is off and theignition is on .................................. 60Briefly displaying the time whenthe device is switched off .............. 60

Sound..................................... 60Adjusting the bass ........................ 60Adjusting the treble ....................... 61Setting the left/right volumedistribution (balance) ..................... 61Adjusting the front/rear volumedistribution (fader) ......................... 61Equalizer presets .......................... 62

X-BASS .................................. 62

Setting the colour ofthe display illumination .......... 63Setting a colour for the displayillumination .................................... 63Selecting a display illuminationcolour during a scan ..................... 63

Adjusting the brightness(dimmer) ................................ 64

Entering the power-onmessage ................................ 65

Configuring the level display . 65

External audio sources .......... 66Switching the AUX input on/off ..... 66

Specifications ........................ 66


38

Notes and accessoriesThank you for choosing a Blaupunktproduct. We hope you enjoy using thisnew piece of equipment.

Please read these operating instruc-tions before using the equipment forthe first time.The Blaupunkt editors are constantlyworking on making the operating in-structions clearer and easier to under-stand. However, if you still have anyquestions on how to operate the device,please contact your dealer or the tele-phone hotline for your country. You willfind the telephone number printed at theback of this booklet.

We provide a manufacturer guaranteeon our products bought within the Eu-ropean Union. You can view the guar-antee conditions at www.blaupunkt.deor ask for them directly at:

Blaupunkt GmbHHotlineRobert Bosch Str. 200

D-31139 Hildesheim

Gerrmany

NOTES AND ACCESSORIES

Road safety Road safety has absolute prior-

ity. Only operate your car sound sys-tem if the road and traffic conditionsallow you to do so. Familiarise your-self with the device before setting offon your journey.You must always be able to hearpolice, fire service and ambulancesirens in good time from inside yourvehicle. For this reason, listen to yourcar sound system at a moderate vol-ume level during your journey.

InstallationIf you want to install your car sound sys-tem yourself, please read the installa-tion and connection instructions thatfollow these operating instructions.

AccessoriesOnly use accessories approved by Blau-punkt.

Remote controlThe RC 08, RC 10, RC 10 H or RC 12H(available as optional accessories) re-mote control allows you to access themost important functions of your carsound system safely and convenientlyfrom your steering wheel.You cannot switch the device on/off us-ing the remote control.

AmplifiersYou can use all Blaupunkt and Velocityamplifiers.

CD changersYou can connect the following BlaupunktCD changers: CDC A 08, IDC A 09 andCDC A 03.


39

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Detachable control panel(flip-release panel)

Theft protectionThe device is equipped with a detacha-ble control panel (flip-release panel) asa way of protecting your equipmentagainst theft. The device is worthlessto a thief without this control panel.

Protect your device against theft by tak-ing the control panel with you whenev-er you leave your vehicle. Do not leavethe control panel inside your vehicle -not even in a hiding place.

The control panel has been designedto be easy to use.

Note: Never drop the control panel.

Never expose the control panel todirect sunlight or other heat sourc-es.

Avoid direct skin contact with thecontrol panel’s electrical contacts. Ifnecessary, clean the contacts witha lint-free cloth and some alcohol.

Detaching the control panel Press the button 2.

The control panel opens out towardsyou.

Hold the control panel by its rightside and then pull the control panelstraight out of the bracket.

Note: The device will switch off after a

particular time period configured byyou. For further details, read thesection entitled “OFF TIMER” inthis chapter.

All the current settings are saved.

Any CD already inserted in the de-vice remains there.

Attaching the control panel Hold the control panel at approxi-

mately right angles to the device.

Slide the control panel into the de-vice’s guides that are positioned onthe left and right at the lower edgeof the housing. Push the controlpanel carefully into the bracket untilit clicks into place.

Flip up the control panel and care-fully press it into the device until itclicks into place.

1.

2.

DETACHABLE CONTROL PANEL


40

Note: When attaching the control panel,

make sure you do not press thedisplay.

If the device was still switched on whenyou removed the control panel, it willautomatically switch on with the lastsettings activated (i.e. radio, CD/MP3,CD changer or AUX) when the panel isreplaced.

Off timer

Note: The device is equipped with a time-

out function. If, for instance, youpress the MENU button 7 and se-lect a menu item, the device willswitch back approx. 8 seconds af-ter the last button was pressed.Any changes to the settings thatyou have made will be saved.

After you detach the control panel, thedevice will switch off after a preset timeperiod. You can set this time to between0 and 30 seconds.

Press the MENU button 7.

Press the or button 6 repeat-edly until “OFF TIMER” appears inthe display.

Adjust the time using the but-tons 6.

When you have finished making yourchanges,

press the MENU button 7 twice.

Note: If you set the off-timer to 0 sec-

onds, the device will switch off im-mediately as soon as you open thecontrol panel.

DETACHABLE CONTROL PANEL


41

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Note: To protect the vehicle battery, the

device will switch off automaticallyafter one hour if the ignition is off.

Switching on by inserting a CDIf the device is switched off and there isno CD present in the drive,

press the button 2.

The control panel opens.

Gently insert the CD with its printedside uppermost into the drive untilyou feel some resistance.

The drive draws in the CD automatical-ly.

You must not hinder or assist the driveas it draws in the CD.

Gently close the control panelwhilst exerting a little pressure untilyou feel it click into place.

The device switches on and starts play-ing the CD.

Note: If the vehicle ignition was switched

off before you inserted the CD, youwill first have to switch on the de-vice by pressing button 1 in orderto start playing the CD.

Switching on/offThere are various ways of switching thedevice on/off:

Switching the device on/off usingthe vehicle ignitionIf the device is correctly connected tothe vehicle’s ignition and you did notswitch it off by pressing button 1, thedevice will switch on/off simultaneouslywith the ignition.

Switching the device on/off usingthe detachable control panel

Detach the control panel.

The device switches off.

Note: The device will switch off after a

preset time period. For further de-tails, read the section entitled “Offtimer”.

Attach the control panel again.

The device switches on. The last set-ting (radio, CD/MP3, CD changer orAUX) will be reactivated.

Switching on/off using button 1

To switch on the device, press but-ton 1.

To switch off the device, press andhold down button 1 for longerthan two seconds.

The device switches off.

SWITCHING ON/OFF


42

Adjusting the volumeYou can adjust the volume in steps from0 (off) to 66 (maximum).

To increase the volume,

turn the volume control 3 clock-wise.

To decrease the volume,

turn the volume control 3 anti-clockwise.

Setting the power-on volumeYou can set the power-on volume.


Press the or button 6 repeat-edly until “ON VOLUME” appearsin the display.

Adjust the power-on volume usingthe buttons 6.

To help you adjust the setting more eas-ily, the device will increase or decreasethe volume as you make your changes.

If you change the setting to “LAST VOL”,the volume level that was set the lasttime you switched off the device will beactivated again.

Note: To protect your hearing, the power-

on volume is limited to a value of“38”. If the volume level was higherthan this when the device was lastswitched off and the “LAST VOL”setting is activated, the system willreset the volume to “38” when youswitch the device on again.

When you have finished adjusting thesetting,


Quick volume reduction (mute)You can quickly decrease the volume(mute) to a level preset by you.

Briefly press button 1.

“MUTE” appears in the display.

Cancelling muteTo return to your previously set volumelevel,

briefly press button 1 again.

Setting the mute levelYou can adjust the mute level.


Press the or button 6 repeat-edly until “MUTE LVL” appears inthe display.

Adjust the mute level using the buttons 6.



Switching the confirmation beepon/offThe system will play a confirmation beepfor some functions if you keep a buttonpressed down for longer than two sec-onds, for instance, when you assign aradio station to a station button. You canswitch the beep on/off.

ADJUSTING THE VOLUME


43

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S


Press the or button 6 repeat-edly until “BEEP ON” or “BEEPOFF” appears in the display.

Adjust the beep setting using the buttons 6. “OFF” means the

beep is switched off and “ON”means the beep is switched on.


press the MENU button 7.

Telephone audioIf your car sound system is connectedto a mobile telephone, the sound sys-tem’s volume will be muted as soon asyou “pick up” the telephone. The tele-phone call is then outputted over the carsound system’s loudspeakers. This re-quires that the mobile telephone be con-nected to the car sound system as de-scribed in the installation instructions.

You will need a cable for this with thefollowing Blaupunkt number: 7 607 001503.

If the sound system receives a trafficannouncement during a telephone call,the system will only play the traffic an-nouncement after you have finished thecall.

You can set the volume at which youwant telephone calls to be initially heard.


Press the or button 6 repeat-edly until “TEL VOL” appears in thedisplay.

ADJUSTING THE VOLUME Set your preferred volume level us-

ing the buttons 6.

When you have finished making yourchanges,


Note: You can use the volume control 3

to adjust the volume of a telephonecall whilst the call is being output-ted by the sound system.


44

Radio modeThis device is equipped with an RDSradio receiver. Many of the receivableFM stations broadcast a signal that notonly carries the programme but alsoadditional information such as the sta-tion name and programme type (PTY).

The station name appears in the dis-play as soon as the tuner receives it.

Adjusting the tuner settingsTo ensure that the tuner works proper-ly, the device must be configured for theregion in which you are using it. You canchoose between Europe (EUROPE),United States (USA), South America (S-AMERICA) and Thailand (THAI). Bydefault, the tuner is set to the region inwhich the device was sold. If you en-counter problems with radio reception,please check this setting.

The radio functions described in theseoperating instructions refer to the EU-ROPE tuner setting.

Press and hold down the 1 and 5buttons 9 simultaneously andswitch on the device again bypressing button 1.

“TUNER” is displayed.

Select your tuner region using the or button 6.

To save the setting,

switch the device off and on againor wait approx. 8 seconds. The carsound system starts with the lastsetting activated (radio, CD/MP3,CD changer or AUX).

Switching to radio modeIf you are in CD/MP3, CD-changer orAUX mode,

press the BND•TS button 4or

press the SRC button ; repeated-ly until the memory bank (e.g.“FM1”) appears in the display.

RDS functionsThe convenient RDS functions AF (Al-ternative Frequency) and REGIONALextend your radio’s range of functions.

AF: If the RDS function is activat-ed, the radio automatically tunesinto the best receivable frequencyfor the station that is currently set.

REGIONAL: At certain times, someradio stations divide their pro-gramme into regional programmesproviding different content. You canuse the REG function to preventthe car radio from switching to al-ternative frequencies that arebroadcasting different programmecontent.

Note: REGIONAL must be activated/de-

activated separately in the menu.

Switching the RDS function on/offIf you want to use the RDS functions(AF and REGIONAL),

press and hold down theTRAF•RDS button 8 for longerthan two seconds.

The RDS function is active when theRDS symbol is shown in the display.

RADIO MODE


45

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Switching REGIONAL on/off


Press the or button 6 repeat-edly until “REG” appears in the dis-play. “OFF” or “ON” is displayedalongside “REG”.

To switch REGIONAL on/off, pressthe or button 6.


Selecting the waveband /memory bankYou can use this device to receive pro-grammes broadcast over the FM fre-quency range as well as the MW andLW (AM) wavebands. There are threememory banks available for the FMwaveband (FM1, FM2 and FMT) andone for each of the MW and LW wave-bands. Six stations can be stored ineach memory bank.

To switch between the FM memorybanks (FM1, FM2 and FMT) and theMW and LW wavebands,

briefly press the BND•TS button4.

Tuning into a stationThere are various ways of tuning into astation.

Automatic station seek tuning

Press the or button 6.

The radio tunes into the next receiva-ble station.

Tuning into stations manuallyYou can also tune into stations manual-ly.

Note: You can only tune into stations

manually if the RDS function is de-activated.


Browsing through broadcastingnetworks (only FM)If radio stations provide several pro-grammes, you have the option of brows-ing through their “broadcasting net-works”.

Note: The RDS function must be activat-

ed before you can use this feature.

Press the or button 6 toswitch to the next station on thebroadcasting network.

Note: When using this feature, you will

only be able to switch to stationsthat you have received once beforealready. To receive the stations,use the scan function or the Travel-store function.

Setting the sensitivity of stationseek tuningYou can choose whether the radioshould only tune into stations providinggood reception or whether it can alsotune into those with a weak reception.


RADIO MODE


46

Press the or button 6 repeat-edly until “SENS” and the currentlyset value appear in the display.

“SENS HI6” means that the tuner is setto the highest sensitivity setting. “SENSLO1” means it is set to the lowest sen-sitivity setting.

Set the desired sensitivity using the buttons 6.



Note: You can set different sensitivity

levels for FM and MW or LW.

Storing stations

Storing stations manually

Select the memory bank that youwant (FM1, FM2, FMT) or one ofthe wavebands (MW or LW).

Tune into the station that you want.

Press and hold down one of thestation buttons 1 - 6 9 for longerthan two seconds to assign the sta-tion to that button.

Storing stations automatically(Travelstore)You can automatically store the six sta-tions providing the best reception in theregion (only FM). The stations are storedin the FMT memory bank.

Note: Any stations previously stored in

this memory bank are deleted inthe process.

Press and hold down the BND•TSbutton 4 for longer than two sec-onds.

The storing procedure begins. “FMTSTORE” appears in the display. Afterthe process has completed, the radiowill play the station that is stored inmemory location 1 of the FMT memorybank.

Listening to stored stations Select the memory bank or wave-

band.

Press the station button 1 - 6 9that corresponds to the station thatyou want to listen to.

Scanning receivable stations(SCAN)You can use the scan function to listento all the receivable stations briefly. Youcan set the scanning time in the menuto between 5 and 30 seconds (in stepsof 5 seconds).

Starting SCAN

Press and hold down the MENUbutton 7 for longer than two sec-onds.

Scanning begins. “SCAN” appearsbriefly in the display followed by a flash-ing display of the current station nameor frequency.

Cancelling SCAN and continuinglistening to a station


Scanning stops and the radio continuesplaying the station that it tuned into last.

RADIO MODE


47

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Setting the scanning time Press the MENU button 7.

Press the or button 6 repeat-edly until “SCAN TIME” appears inthe display.

Set the desired scanning time us-ing the buttons 6.



Note: The scanning time that you set is

also used when scanning in CD/MP3 mode and in CD-changermode.

Programme type (PTY)Besides transmitting the station name,some FM stations also provide informa-tion on the type of programme they arebroadcasting. Your car radio can receiveand display this information.

For example, the programme types canbe:

CULTURE TRAVEL JAZZ

SPORT NEWS POP

ROCK CLASSICS

You can use the PTY function to selectstations of a particular programme type.

PTY-EONIf you specify the programme type andstart seek tuning, the radio will switchfrom the current station to a station ofthe selected programme type.

Note: If the tuner does not find a station

that matches the selected pro-gramme type, you will hear a beepand “NO PTY” appears briefly inthe display. The radio will then re-tune to the station that it receivedlast.

If the tuned radio station or anotherstation on the broadcasting net-work broadcasts your selected pro-gramme type at a later point intime, the radio will automaticallyswitch from the currently tuned sta-tion or from CD/MP3 mode or CD-changer mode to the station whoseprogramme type matches the oneyou selected.

Switching PTY on/off


Press the or button 6 repeat-edly until “PTY ON” or “PTY OFF”appears in the display.

Press the or button 6 toswitch PTY ON or OFF.


Selecting the PTY languageYou can select the language in whichthe programme types are displayed.The following are available:“DEUTSCH”, “ENGLISH” and“FRANÇAIS”.


Press the or button 6 repeat-edly until “PTY LANG” appears inthe display.

RADIO MODE


48

Set your preferred language usingthe buttons 6.



Selecting a programme type andstarting seek tuning


The current programme type appearsin the display.

If you want to select another pro-gramme type, you can do so bypressing the or button 6whilst this display is visible.

The selected programme type appearsbriefly in the display.

Press the or button 6 to startseek tuning.

The radio will then tune into the nextstation it finds that matches your select-ed programme type.

Optimising radio reception

HICUTThe HICUT function improves receptionduring poor radio reception (only FM).If interference occurs, the interferencelevel is cut automatically.

Switching HICUT on/off


Press the or button 6 repeat-edly until “HICUT” appears in thedisplay.

Press the or button 6 to ad-just the HICUT setting.

“HICUT 0” means that the interferencelevel will not be cut automatically. “HI-CUT 1” means that it will be cut auto-matically.


Configuring the displayIn radio mode, you have the option ofdisplaying the waveband together withthe memory bank and the time or thestation name / frequency of the currentstation.

To switch between the displays,press and hold down the DISbutton : for longer than two sec-onds.

RADIO MODE


49

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Traffic informationYour device is equipped with an RDS-EON receiver. EON stands for En-hanced Other Network.

Whenever a traffic announcement (TA)is broadcast, the system switches au-tomatically from a station that does notprovide traffic reports to the appropri-ate traffic information station within thebroadcasting network that does.

Once the traffic report has been played,the system will switch back to the pro-gramme you were listening to before.

Switching traffic informationpriority on/off Briefly press the TRAF•RDS but-

ton 8.

Traffic announcement priority is activewhen the traffic-jam symbol lights up inthe display.

Notes:You will hear a warning beep:

if you leave the reception area of atraffic information station that youare currently listening to.

if you are receiving a traffic infor-mation station and the volume isset to minimum (0) or if, whilst lis-tening to a CD/MP3, a CD in thechanger or an AUX source, youleave the reception area of thetuned traffic information station andthe subsequent automatic searchcannot find a new traffic informa-tion station.

if you retune the radio from a trafficinformation station to a station thatdoes not broadcast traffic informa-tion.

If you hear the warning beep, you caneither switch off traffic information pri-ority or tune into a station that broad-casts traffic information.

Setting the volume for trafficannouncements Press the MENU button 7.

Press the or button 6 repeat-edly until “TA VOLUME” appears inthe display.

Adjust the volume using the buttons 6.



Notes: You can use the volume control 3

to adjust the volume during a trafficannouncement for the duration ofthat announcement.

You can set the volume distributionfor the traffic announcements. Forfurther details, please read the“Sound” chapter.

TRAFFIC INFORMATION


50


The CD starts playing.

Note: If the vehicle ignition was switched

off before you inserted the CD, youwill first have to switch on the de-vice by pressing button 1 in orderto start playing the CD.

If there is already a CD inserted in thedrive,

press the SRC button 1 repeated-ly until “CD” appears in the display.

Playback begins from the point at whichit was last interrupted.

Selecting tracks Press one of the arrow buttons 6

to select the next or previous track.

If you press the or button 6 once,the current track will be played againfrom the beginning.

Fast track selectionFor fast track selection (backwards orforwards),

press and hold down one of the buttons 6 until fast-reverse /

fast-forward track selection begins.

Fast searching (audible)For fast searching (backwards or for-wards),

press and hold down one of the buttons 6 until fast searching

backwards / forwards begins.

CD modeYou can use this device to play stand-ard audio CDs, CD-Rs and CD-RWswith a diameter of 12 or 8 cm.

Risk of severe damage to theCD drive!Contoured CDs (shape CDs) are notsuitable for playback in this unit. Wedo not accept responsibility for anydamage to the CD drive that mayoccur as a result of the use of un-suitable CDs.

To ensure the system functions proper-ly, only use CDs labelled with the com-pact disc logo. Problems might be ex-perienced when playing copy-protect-ed CDs. Blaupunkt cannot guaranteethe proper functioning of copy-protect-ed CDs!

Besides being able to play audio CDson this device, you can also play CDscontaining MP3 music files. For furtherdetails, please read the “MP3 mode”chapter.

Switching to CD modeIf there is no CD inserted in the drive,

press the button 2.


Gently push the CD with the print-ed side uppermost into the CDcompartment until you feel someresistance.

The drive draws in the CD automatic-ally.

You must not assist or hinder the driveas it draws in the CD.

CD MODE


51

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Repeating tracks (REPEAT)If you want to repeat a track,

press the 4 RPT button 9.

“RPT TRCK” appears briefly in the dis-play and the RPT symbol lights up. Thetrack is repeated continuously until youdeactivate RPT.

Cancelling REPEATIf you want to cancel the repeat func-tion,

press the 4 RPT button 9 again.

“RPT OFF” appears briefly in the dis-play and the RPT symbol disappears.Normal playback is then resumed.

Pausing playback (PAUSE) Press button 3 9.

“PAUSE” appears in the display.

Cancelling pause

Press button 3 9 whilst pauseis activated.

Playback is resumed.

Configuring the displayYou can choose between two displaytypes for CD mode:

Track number and clock time

Track number and playing time


Random track play (MIX) Press the 5 MIX button 9.

“MIX CD” appears briefly in the displayand the MIX symbol lights up. The nextrandomly selected track will then beplayed.

Cancelling MIX

Press the 5 MIX button 9 again.

“MIX OFF” appears briefly in the dis-play and the MIX symbol disappears.

Scanning tracks (SCAN)You can scan (briefly play) all the trackson the CD.

Press and hold down the MENUbutton 7 for longer than two sec-onds.

The next track will then be scanned.

Note: You can set the scanning time. For

further details, please read the sec-tion entitled “Setting the scanningtime” in the “Radio mode” chapter.

Cancelling SCAN and continuinglistening to a track

To cancel scanning, press theMENU button 7.

The currently scanned track will thencontinue to be played normally.

CD MODE


52

Displaying CD textSome CDs include CD text. The CD textmight contain the names of the artist,album and track.

You can allow the CD text to be dis-played as scrolling text every time youswitch to another track. The default dis-play will appear again after the wholeCD text has been shown once. For fur-ther details, please read the sectionentitled “Configuring the display”.

Switching CD text on/off


Press the or button 6 repeat-edly until “CD TEXT” appears inthe display.

Switch the CD text function on(“TEXT ON”) or off (“TEXT OFF”)using the or button 6.



Traffic announcements in CDmodeIf you wish to receive traffic announce-ments whilst CD mode is activated,

press the TRAF•RDS button 8.

Traffic announcement priority is activewhen the traffic jam symbol is shown inthe display. For further details, pleaseread the “Traffic information reception”chapter.

CD MODE

Ejecting a CD Press the button 2.


Press the button < next to theCD compartment.

The CD is ejected.

Remove the CD.


Notes: If a CD is ejected, the drive will au-

tomatically draw it back in again af-ter approx. 10 seconds.

You can also eject CDs whilst thedevice is switched off or whilst an-other audio source is activated.


53

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

MP3 modeYou can also use this car sound sys-tem to play CD-Rs and CD-RWs thatcontain MP3 music files.

Preparing an MP3-CDThe various combinations of CD burn-ers, CD burning software and CD blanksmay lead to problems arising with thedevice’s ability to play certain CDs. Ifproblems occur with your own burnedCDs, you should try another brand ofCD blank or choose another colour ofCD blank.

The format of the CD must be ISO 9660Level 1 / Level 2 or Joliet. Other formatscannot be played reliably.

You can create a maximum of 252 di-rectories on a CD. You can use this de-vice to access each of the directories.

Regardless of the number of directorieson the CD, the device can handle up to999 MP3 files on a single CD with amaximum of 255 files in a directory.

D01

D02

T001

T005T004T003T002

D03

T001

T006T005T004T003T002

T011

T007T008T009T010

D04

T001

T006T005T004T003T002

Directories

Tracks•Files

Each directory can be given a name us-ing a PC. The device is capable of dis-playing the directory name. You shouldname the directories and tracks/filesusing the method provided by your CDburner software. The software’s instruc-tion manual will provide details on howto do this.

Note: When naming directories and

tracks/files you should not use ac-cents and special characters.

If you like your files to be in the correctorder, you should use burner softwarethat places files in alphanumerical or-der. If your software does not providethis feature you also have the option ofsorting the files manually. To do so, youshould place a number (e.g. “001”,

MP3 MODE


54

“002”, etc.) at the beginning of each filename - you must include the leadingzeros.

MP3 tracks can contain additional in-formation such as the artist, album andtrack names (ID3 tags). This device candisplay ID3 tags (version 1).

When creating (encoding) MP3 filesfrom audio files, you should use bit ratesup to a maximum of 256 kbits/sec.

This device can only play MP3 files thathave the “.MP3” file extension.

Note:To ensure uninterrupted playback,

do not attempt to change the fileextension to “.MP3” of any files oth-er than MP3 files and then attemptto play them! The device will ignorethese invalid files during playback.

Do not use “mixed” CDs containingboth non-MP3 data and MP3tracks (the device only reads MP3files during MP3 playback).

Do not use mix-mode CDs contain-ing both CD audio tracks and MP3tracks. If you try playing a mix-mode CD, the device will only playthe CD audio tracks.

Switching to MP3 modeMP3 mode is activated in the same wayas normal CD mode. For further details,please read the section entitled “Switch-ing to CD mode” in the “CD mode” chap-ter.

Configuring the displayAn MP3-CD must already be insertedin the device before you can change thefollowing settings.

Configuring the default displayYou can display various types of infor-mation on the current track:

Track number and playing time(“TRCK-TIME”)

Track number and clock time(“TRCK-CLK”)

Directory number and tracknumber (“DIR-TRCK”)

Directory number and clock time(“DIR-CLK”)

Directory number and playing time(“DIR-TIME”)

Note: After you switch tracks, the device

first displays the MP3 scrolling textonce and then it displays the infor-mation continuously.

To switch between the different displayoptions,

press and hold down the DISbutton : for longer than two sec-onds.

A different display type is selected eve-ry time you perform a long press on the

DIS button :.

Perform this long button press re-peatedly until the information youwant is displayed.

MP3 MODE


55

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Configuring the MP3 scrolling textOne of the following scrolling texts isdisplayed once every time the track ischanged. Afterwards, the configureddefault display is shown.

The available scrolling texts are:

Directory name (“DIR NAME”)

Track name (“SONG NAME”)

Album name (“ALBM NAME”)

Artist name (“ARTIST”)

File name (“FILE NAME”)

Note: The artist, track and album names

are part of the MP3-ID tag (version1) and can only be displayed if theyhave been saved with the MP3files (for further details, please readthe instructions that came with yourPC’s MP3 software or burner soft-ware).

To switch between the different displayoptions,


Press the or button 6 repeat-edly until “MP3 DISP” appears inthe display.

Use the or button 6 to selectthe MP3 scrolling text that youwant.



Selecting a directoryTo move up or down to another directo-ry,

press the or button 6 once orseveral times.

Selecting tracks/filesTo move up or down to another track/file in the current directory,


If you press the button 6 once, thecurrent track will be played again fromthe beginning.

Fast searchingFor fast searching (backwards or for-wards),

press and hold down the or button 6 until fast searching back-wards / forwards begins.

Random track play (MIX)To play the tracks in the current directo-ry in random order,

briefly press the 5 MIX button 9.

“MIX DIR” appears in the display andthe MIX symbol lights up.

To play all the tracks on the insertedMP3-CD in random order,

press and hold down the 5 MIXbutton 9 for longer than two sec-onds.

“MIX CD” appears in the display and theMIX symbol is displayed.

MP3 MODE


56

Cancelling MIXTo cancel MIX,


“MIX OFF” appears in the display andthe MIX symbol disappears.

Scanning tracks (SCAN)You can scan (briefly play) all the trackson the CD.

Press and hold down the MENUbutton 7 for longer than two sec-onds. The next track will then bescanned.

“TRK SCAN” appears in the displayalongside the flashing track numbers.The tracks on the CD are briefly playedin ascending order.


details on setting the scanningtime, please read the section enti-tled “Setting the scanning time” inthe “Radio mode” chapter.

Cancelling SCAN and continuinglistening to a track

Briefly press the MENU button 7.


Repeating individual tracks orwhole directories (REPEAT)To play the current track repeatedly,

briefly press the 4 RPT button 9.

“RPT TRCK” appears briefly in the dis-play and RPT is displayed.

To play the whole directory repeatedly,

press and hold down the 4 RPTbutton 9 for longer than two sec-onds.

“RPT DIR” appears in the display.

Cancelling REPEATTo stop the current track or current di-rectory from being repeated,


“RPT OFF” appears briefly and RPTdisappears from the display.



Cancelling pause



MP3 MODE


57

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

CD-changer mode

Note: Information on handling CDs, in-

serting CDs and operating the CDchanger can be found in the oper-ating instructions supplied withyour CD changer.

Switching to CD-changer mode Press the SRC button ; repeat-

edly until “CHANGER” appears inthe display.

The device starts playing the first CDthat the CD changer detects.

Selecting CDsTo move up or down to another CD,


Note: The device will ignore empty CD

slots in the changer and slots con-taining invalid CDs.

Selecting tracksTo move up or down to another trackon the current CD,


Fast searching (audible)For fast searching (backwards or for-wards),

press and hold down one of the buttons 6 until fast searching

backwards / forwards begins.

Configuring the displayThere are five display options availablefor CD-changer mode:

Track number and playing time(“TRCK-TIME”)

Track number and clock time(“TRCK-CLK”)

CD number and track number(“CD-TRCK”)

CD number and clock time(“CD-CLK”)

CD number and playing time(“CD-TIME”)


A different display type is selected eve-ry time you perform a long press on the

DIS button :.

Perform this long button press re-peatedly until the information youwant is displayed.

Repeating individual tracks orwhole CDs (REPEAT)To repeat the current track,


“RPT TRCK” appears briefly in the dis-play and RPT is displayed.

To repeat the current CD,

press and hold down the 4 RPTbutton 9 for longer than two sec-onds.

“RPT DISC” appears briefly in the dis-play and RPT is displayed.

CD-CHANGER MODE


58

Cancelling REPEATTo stop the current track or current CDfrom being repeated,


“RPT OFF” appears and RPT disap-pears from the display.

Random track play (MIX)To play the tracks on the current CD inrandom order,


“MIX CD” appears briefly in the displayand MIX is displayed.

To play the tracks on all the inserted CDsin random order,

press and hold down the 5 MIXbutton 9 for longer than two sec-onds.

“MIX ALL” appears briefly in the displayand MIX is displayed.

Cancelling MIX Briefly press the 5 MIX button 9.

“MIX OFF” appears and MIX disappearsfrom the display.

Scanning all the tracks on all theCDs (SCAN)To scan (briefly play) all the tracks onall the inserted CDs in ascending order,

press and hold down the MENUbutton 7 for longer than two sec-onds.

“TRK SCAN” appears in the display andthe number of the current track flashes.

Cancelling SCANTo stop scanning,

briefly press the MENU button 7.



further details, please read the sec-tion entitled “Setting the scanningtime” in the “Radio mode” chapter.



Cancelling pause



CD-CHANGER MODE


59

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Remote controlYour car radio is equipped with an inte-grated infrared remote-control receiver.The receiver is built into the detachablecontrol panel.

You can safely and conveniently con-trol the majority of the device’s functionsusing a steering-wheel remote controlor handheld remote control (availableas optional accessories).

You cannot switch the device on/off us-ing the remote control.

Note: The infrared receiver that is includ-

ed with the remote control onlyneeds to be installed (as describedin the installation instructions) ifthere is no direct line-of-sight con-nection between the remote controland the car radio.

CLOCK time

Displaying the clock timeTo display the clock time briefly,

briefly press the DIS button :.

Setting the clock timeTo set the clock time,


Press the or button 6 repeat-edly until “CLOCK SET” appears inthe display.

Press the button 6.

The clock time appears in the display.The hours flash and can be adjusted.

Adjust the hours using the but-tons 6.

Once the hours are set,

press the button 6.

The minutes flash.

Adjust the minutes using the buttons 6.

Press the MENU button 7 twice.

Selecting 12/24-hour clockmode Press the MENU button 7.

“MENU” appears in the display.

Press the or button 6 repeat-edly until “24 H MODE” or “12 HMODE” appears in the display.

Press the or button 6 toswitch between the modes.

REMOTE CONTROL CLOCK TIME


60



Displaying the time continuouslywhen the device is off and theignition is onTo display the time when the device isoff and the vehicle ignition is on,



Press the or button 6 repeat-edly until “CLOCK OFF” or“CLOCK ON” appears in the dis-play.

Press the or button 6 toswitch between the ON/OFF set-tings.



Briefly displaying the time whenthe device is switched offTo display the time briefly when the de-vice is off,

press the DIS button :.

The clock time is shown in the displayfor approx. 8 seconds.

SoundYou can adjust the sound settings (bassand treble) separately for each source(radio, CD/MP3 and CD changer / AUX).

You can boost or cut the bass and tre-ble in steps of ± 7.

You can choose from 4 possible centrefrequencies in order to further optimisethe sound.

The change to the boost or cut of thebass and treble relates to the particularcentre frequency that you selected.

The volume distribution settings (bal-ance and fader) apply to all the audiosources (except for traffic announce-ments).

You can only adjust the balance andfader settings for traffic announcementswhilst a traffic announcement is actu-ally being played.

Adjusting the bass

Adjusting the bass boost/cut

Press the AUDIO button 5.

“BASS” appears in the display.

Press the or button 6 to ad-just the bass.

Setting the bass centre frequencyYou can choose between 4 centre fre-quencies for boosting/cutting the bass:60 Hz, 80 Hz, 100 Hz and 120 Hz.

Whilst the bass setting is being dis-played, press the or button 6to choose between the 4 possiblecentre frequencies.

CLOCK TIME SOUND


61

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S


press the AUDIO button 5.

Adjusting the treble

Adjusting the treble boost/cut

Press the AUDIO button 5.


Press the button 6 repeatedlyuntil “TREBLE” appears in the dis-play.

Press the or button 6 to ad-just the treble.

Setting the treble centre frequencyYou can choose between 4 centre fre-quencies for boosting/cutting the treble:8 kHz, 10 kHz, 12 kHz and 15 kHz.

Whilst the treble setting is beingdisplayed, press the or button6 to choose between the 4 possi-ble centre frequencies.



Setting the left/right volumedistribution (balance)To adjust the left/right volume distribu-tion (balance),



Press the button 6 repeatedlyuntil “BAL” appears in the display.

Press the or button 6 to ad-just the balance (right/left).



Adjusting the front/rear volumedistribution (fader)To adjust the front/rear volume distribu-tion (fader),



Press the button 6 repeatedlyuntil “FADER” appears in the dis-play.

Press the or button 6 to ad-just the fader (front/rear).



SOUND


62

Equalizer presetsThis device is equipped with an equal-izer that has been preset with settingsfor the “ROCK”, “POP” and “CLASSIC”music styles.

To select an equalizer preset,



Press the button 6 repeatedlyuntil “POP”, “ROCK”, “CLASSIC” or“EQ OFF” appears in the display.

Press the or button 6 to se-lect one of the presets or select“EQ OFF” to switch off the equaliz-er. If you select one of the presets,it will be shown continuously in thedisplay.



X-BASSYou can use the X-Bass feature to boostthe bass at low volume levels.The selected X-Bass setting affects allthe audio sources (radio, CD/MP3, CDchanger or AUX).You can set the X-Bass in steps rang-ing from OFF to three. Three means thatthe X-Bass boost is set to maximum andOFF means that X-Bass is switched off.Additionally, you can choose betweena centre frequency of 50 Hz or 100 Hz.

Adjusting the X-BASS boost Press the AUDIO button 5.


Press the button 6 repeatedlyuntil “X-BASS” appears in the dis-play together with the current set-ting.

Press the or button 6 repeat-edly until the setting that you wantappears in the display.



Setting the X-BASS centrefrequencyYou can choose between 2 centre fre-quencies for the X-BASS: 50 Hz or100 Hz.

Whilst the X-BASS setting is beingdisplayed, press the or button6 to choose between the 2 possi-ble centre frequencies.



SOUND X-BASS


63

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Setting the colour of thedisplay illuminationYou can adjust the colour of the displayillumination to suit the illumination ofyour vehicle cockpit. The primary col-ours red, green and blue (R-G-B) areavailable for this.

Setting a colour for the displayillumination Press the MENU button 7.

Press the or button 6 repeat-edly until “DISP COL” appears inthe display.


The menu for adjusting the colours isdisplayed. “R”, “G” and “B” are displayedwith the current values. The “R” settingflashes.

Press the or button 6 repeat-edly until the setting that you wantis displayed after “R”.

Press the or button 6 tomove the selection cursor to theposition after the other colours (“G”or “B”).

Adjust the other colours to suit yourpreferences.


Press the MENU button 7 twice.

The settings are saved.

Selecting a display illuminationcolour during a scanYou can select the colour of the displayillumination during a “scan”. During thescan, the display shows all the possiblecolour variations that are available in theRGB spectrum. The scan takes approx.40 seconds.


Press the or button 6repeatedly until “COL SCAN”appears in the display.


The colour scan begins. All the possi-ble colour variations that are availablein the RGB spectrum are shown in thedisplay one after another.

If you want to select the display illumi-nation colour that is currently beingshown,



If you want to cancel the scan withoutsetting a new colour,

press the or button 6.

Note: If you do not press a button, the

scan will stop after cycling throughthe colours once (approx. 40 sec-onds) and the previously selectedcolour will be applied as the settingagain.

DISPLAY ILLUMINATION


64

BRIGHTNESS (DIMMER)

Adjusting the brightness(dimmer)The display brightness will change whenthe headlights are turned on/off if yourcar radio is connected as described inthe installation instructions and yourvehicle is equipped with the appropri-ate connection. You can adjust the dis-play brightness for night and day sepa-rately in steps ranging from 1 - 9.

In addition, you can select the “AUTODIM” setting for the night-time dimmer(DIM NIGHT). If the “AUTO DIM” set-ting is activated, the car radio's illumi-nation will be adjusted to suit the cock-pit's illumination setting when the vehi-cle lights are switched on.

Setting “DIM DAY” or “DIM NIGHT”



Press the or button 6 repeat-edly until “DIM DAY” or “DIMNIGHT” appears in the display.

Press the or button 6 toswitch between the brightness lev-els.



Setting “AUTO DIM”

Press the or button 6 repeat-edly until “DIM NIGHT” appears inthe display.

Press the button 6 repeatedlyuntil “AUTO DIM” appears in thedisplay.




65

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Entering the power-onmessageAfter you switch on your device, thesystem displays a short message in thedisplay. The factory default setting is the“BLAUPUNKT” text. Instead of this, youcan enter your own text up to 9 charac-ters long.


Press the or button 6 repeat-edly until “ON MSG” appears in thedisplay.

Press the button 6.

The default text for the power-on mes-sage appears in the display. The inputcursor flashes at the beginning of theline.

Note: You can delete the entire line by

pressing and holding down theor button 6 for longer than

two seconds.

To enter a different text,

select a letter using the or but-ton 6.

Move the selection cursor usingthe or button 6.

Once you have entered the message,



Configuring the leveldisplayThe level display temporarily providesyou with a symbolic representation ofthe volume and audio settings whilst youare adjusting them.

When you are not changing any set-tings, the level display depicts the peakmusic/speech output. You can switchthe level display on/off.



Press the or button 6 repeat-edly until “PEAK LVL” appears inthe display.

Press the or button 6 toswitch between “PEAK ON” and“PEAK OFF”.



POWER-ON MESSAGE LEVEL DISPLAY


66

SPECIFICATIONS

External audio sourcesInstead of connecting a CD changer,you can connect another audio sourceequipped with a line output. Audio sourc-es can, for example, be portable CDplayers, MiniDisc players or MP3 play-ers.

If you want to connect an external au-dio source, you will need an adaptercable. You can obtain this cable (Blau-punkt no.: 7 607 897 093) from yourauthorised Blaupunkt dealer.

Note: If no CD changer is connected, the

AUX input must be activated in themenu.

Switching the AUX input on/off Press the MENU button 7.


Press the or button 6 repeat-edly until “AUX OFF” or “AUX ON”appears in the display.

Press the or button 6 toswitch AUX on/off.



Note: If the AUX input is activated, you

can select it by pressing the SRCbutton ;. “AUX INPUT” then ap-pears in the display.

Specifications

AmplifierOutput power: 4 x 25 watts sine

in accordance withDIN 45 324at 14.4 V4 x 45 watts max.power

TunerWavebands in Europe:FM : 87.5 - 108 MHzMW: 531 - 1 602 kHzLW : 153 - 279 kHz

FM frequency response:35 - 16,000 Hz

CDFrequency response:

20 - 20,000 Hz

Pre-amp out4 channels: 2 V

Input sensitivityAUX input: 2 V / 6 kΩ

Subject to changes!

EXTERNAL AUDIO SOURCES


297

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Bitte den ausgefüllten Gerätepass sicher aufbewahren!Please keep the filled-in radio pass in a safe place!Prière de conserver soigneusement la carte d’autoradio remplie !Tenete per favore il libretto di apparecchio, debitamente riempito,in un posto sicuro!Bewaar de ingevulde apparaatpas op een veilige plaats!Vänligen förvara ifyllt apparatpass på säker plats!¡Favor guardar el documento del aparato debidamente llenado enun lugar seguro!Por favor, guardar o cartão preenchido do aparelho num lugarseguro!Det udfyldte apparatpas opbevares et sikkert sted!

EA_BrooklynMP35 19.08.2005, 15:01 Uhr297

Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim

08/05 - CM/AS-ASA

(dt, gb, fr, it, nl, sw, es, pt, dk)

Name: ..................................................................

Typ: ..................................................................

Serien-Nr: BP .............................................................

Gerätepass

Country: Phone: Fax: WWW:

Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.comAustria (A) 01-610 39 0 01-610 39 391Belgium (B) 02-525 5444 02-525 5263Denmark (DK) 44 898 360 44-898 644Finland (FIN) 09-435 991 09-435 99236France (F) 01-4010 7007 01-4010 7320Great Britain (GB) 01-89583 8880 01-89583 8394Greece (GR) 210 94 27 337 210 94 12 711Ireland (IRL) 01-46 66 700 01-46 66 706Italy (I) 02-369 62331 02-369 62464Luxembourg (L) 40 4078 40 2085Netherlands (NL) 0800 400 1010 0800 400 1040Norway (N) 66-817 000 66-817 157Portugal (P) 2185 00144 2185 00165Spain (E) 902 52 77 70 91 410 4078Sweden (S) 08-7501850 08-7501810Switzerland (CH) 01-8471644 01-8471650Czech. Rep. (CZ) 02-6130 0446 02-6130 0514Hungary (H) 76 511 803 76 511 809Poland (PL) 0800-118922 022-8771260Turkey (TR) 0212-335 06 71 0212-346 00 40USA (USA) 800-2662528 708-6817188Brasil(Mercosur) (BR) 0800 7045446 +55-19 3745 2773Malaysia(Asia Pacific) (MAL) +604-6382 474 +604-6413 640

Brooklyn MP35

7 645 261 310

8622404763

EA_BrooklynMP35 19.08.2005, 15:01 Uhr298

Documents

Brooklyn MP35 - Blaupunkt · follow these operating instructions. Accessories Only use accessories approved by Blau-punkt. Remote control The RC 08, RC 10, RC 10 H or RC 12H (available