Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
—BROCHURE
Superstrut® Metal FramingChannel & Accessories
• This guide presents a summary of the Superstrut® products, for details re-garding our complete offering, consult our “Metal Framing, Fastening and Iden-tification” catalogue at tnb.ca.abb.com or contact your local representative.
B1 copy starts here
B2 copy starts here
B3 copy starts here
—Superstrut Metal FramingChannels
S U PE R S TR UT M E TA L F R A M I N G CH A N N EL S
• Cable Tray Supports• Pipe & Conduit Supports• Trapeze Hangers• Wall Framing• Rack and Shelving
The Superstrut system is designed with many time-saving features and provides solutions for various applications such as;
—Finishes & Materials
Finish on steel
BC Bare Steel
PGC Pre-Galvanized
EGC Electrogalvanized
HDGC Hot Dipped Galvanzied
GR, GY, WH... Epoxy Coating
Other material offered
ALC Aluminum
T316L Stainless Steel (Type 316L)
— Channel hole configurations
— Channel Series
Half Slot Channel (HS)Slots: 9/16 in. X 1-1/8 in.
Slotted Channel (S)Slots: 7/16 in. X 3 in.
Slotted Wide Channel (SW)Slots: 9/16 in. X 3 in.
Punched Channel (P)Holes: 9/16 in.
2” 4” 4” 1 7/8”
— Welded Combinations
EXAMPLES: Two A1200 channels back to back are ordered as A1202. Two A1200 channels back to side are ordered as A1202C.
02 02A 02B 02c 03A 03B
03C 03D 03E
04
A1200 (12 gauge) A1400 (14 gauge)
A
1-5/8 in.
1-5/8 in.
B1200 (12 gauge) B1400 (14 gauge)
B1-5/8 in.
13/16 in.
D1200 (12 gauge) E1200 (12 gauge)
E
1-5/8 in.
2-7/16 in.
H1200 (12 gauge)
H
1-5/8 in.
3-1/4 in.
D
1-5/8 in.
1 in.
6”
Channel with Knockouts (KO)KO: 1/2 in.
TI M E S AV I N G SO LU TI O NS
—Superstrut Metal FramingTime Saving Solutions
Cat. No.
Trade Size (in.)Cable O.D.Range (in.)EMT Rigid Conduit
CPC025 1/4 1/4 0.312 - 0.600
CPC050 1/2 1/2 0.650 - 0.890
CPC075 3/4 3/4 0.860 - 1.110
CPC100 1 1 1.100 - 1.400
CPC125 1-1/4 1-1/4 1.400 - 1.725
CPC150 1-1/2 1-1/2 1.690 - 1.980
CPC200 2 2 1.980 - 2.576
CPC250 2-1/2 2-1/2 2.576 - 3.060
CPC300 3 3 3.060 - 3.626
CPC350 3-1/2 3-1/2 3.626 - 4.126
CPC400 4 4 4.126 - 4.626
Cobra® Clamp One-piece, heavy duty construction, ready to install, right out of the box. Use to attach and support a full range of EMT & rigid conduits from 1/4 to 4 in. trade sizes.
Cat. No. Size (in.) Design load (lb)
H 122 1/4 EG 1/4 150
H 122 3/8 EG 3/8 590
H 122 1/2 EG 1/2 1080
Bat ClipTM Flexible conduit hanger, attaches ExpressTray® to strut.
H122 TrapnutTM Strut Fastener Reduces time to install trapeze framing and support. Closes at any desired position, can be removed and reused.
Cat. No. Material and Finish
SSF-CK535 Spring steel with zinc phosphate finish (black)
B1 copy starts here
B2 copy starts here
B3 copy starts here
S U PE R S TR UT M E TA L F R A M I N G P OS T B A SE S A N D ACCE SSO R IE S
—Superstrut Metal FramingPost bases and accessories
6
6
3-1/4
3-1/2
3 dia.3-3/8
86-1/2
1-5/8
3-1/8
3-1/2
3/4 dia. 2 holes
4 holes 3/4 dia.
3-5/16 3-1/2
66
4-1/4 4-1/4
4 holes 3/4 dia.
1-11/16 3-1/2
6
4-1/44-1/4
6
1-11/16
3-1/2
1-5/8
3/4 dia.
AP232 AP235AP232FL AP235FLAP232SQ AP235SQ
— Post bases
3-1/2
1-5/8
1-11/16
86-1/2
3
3/4 dia. 2 holes
TC5363X
— Universal channel cone nuts One size fits all strut depths. Used to connect modular framing channels to accessories. (Available in a GoldGalv® finish)
UCN Series
A243-1EGC For A1200 channels.
— Threaded rod Threaded rod is used to suspend metal framing channel from ceilings. Available thread sizes: 1/4 to 1 in.
H104 Series
A100 & B100 Series
— Spring nutSelf-aligning spring nuts are designed to provide resistance to pull-out and side slip. Available sizes:1/4 to 5/8 in.
— U shape channel inside joinerA213 is for A1200 Series.A-213-14 is for A1400 Series.(Available in a GoldGalv® finish)
A213 & A-213-14
— Cable tie mounting baseFits all 1-5/8 in. channels.
AB844 Series
— Strut cover & end capFor a clean finish and professional appearance after wiring has been completed. Available in pre-galvanized and plastic.
FIT TI N G S FO R A N E A S Y I NS TA L L ATI O N
—Superstrut Metal FramingFittings for an easy installation
— Flat fittings
— Shaped fittings
AB219
3-1/2
3-1/2
N219
3-1/2
5-3/8
AB220
3-1/2
5-3/8
AB253
5-3/8
5-3/8
— Angular fittings
AB201 AB205 AB213X299 AB203 AB214
2-1/4
1-5/8 2-5/8
1-5/16
1-1/2
1-5/8
3-1/2
1-7/16
4-1/8 4-1/8
3-1/2
1-7/16
4-1/8 4-1/8
1-7/16
3-1/2
— SupermagTM magnetic fittings
AB241M Square Washers for 1/4 to 1/2 in. bolts
AB205M 90˚ Angle Fitting
AB219M Flat L-Bracket
1-5/8
AB241
3-1/2
AB206
5-3/8
AB207
7-1/4
X207
AB202M90˚ Angle Fitting
AB220M Flat L-Bracket
A209 A210 AW220
1-5/8
2
2-1/8
1-5/8
1-1/16
1-5/8
5-3/8
1-21
/32
5-13/321-7/8
2-1/2
AB225
3-1/2 45˚
2-5/16
1-1/16
345˚
AB227
1-5/8
1-5/8
AB239
3-7/16
3-5/8
45˚
AB228
5-1/4
4-7/8
45˚
AB226
Nickel-plated magnets embedded in the most popular Superstrut steel fittings. Adds convenience and safety to strut as-sembly by eliminating the need to manu-ally hold fittings and strut together while installing bolts, nuts and rods.
B1 copy starts here
B2 copy starts here
B3 copy starts here
S U PE R S TR UT M E TA L F R A M I N G C A B L E A N D PI PE CL A M P S TO I NS TA L L Q U I CK LY A N D SEC U R ELY
—Superstrut Metal FramingCable and Pipe Clamps to install quickly and securely
— Support brackets
— Quik clamp™
One-piece construction integral bolt and captive nut for EMT & rigid conduits 1-1/2 to 4-11/16 in. trade sizes.
— Conduit & pipe clampTwo-piece, heavy-duty construction for EMT & rigid conduits; 1/2 to 4 in. trade sizes.Machine screw and nut included.
— Conduit & pipe hangerAccommodates 3/8 in. up to 4 in. EMT & rigid conduits Load rating 500 lb
6H-Bwith bolt and hex nut
6H-TB Threadedwith bolt
S222 Load rating 750 lb to 1,000 lb
S226 Load rating 750 to 1,000 lb
S247 Load rating 3,650 in. lb to 5,250 in. lb
S248 Load rating 7,550 in. lb to 10,800 in. lb
S249 Load rating600 to 1,600 lb
S250 Load rating 400 to 1,500 lb
S256 Load rating 250 to 1,000 lb
S251 / S256 Load rating 500 to 1,650 lb
Design load 1: 200 to 350 lbDesign load 2-3: 50 lb
Design Load 3
Design Load 1
Design Load 2
TBQC series
701 series
1-5/8
61-3/16
5-1/43-1/8
16-1/2
1-5/8
61-3/16
5-1/43-1/8
18-1/21-3/16
5-7/8
4-3/4
4-3/4
7-1/23 4-5/8
6-1/44-5/8
3-1/2
3-1/4
B E A M CL A M P S A N D H A N G ER SU PP O RTS
—Superstrut Metal FramingBeam Clamps and Hanger Supports
— Beam clamps for mounting channel
— Beam clamps for hanging rods
UM562 For rod size 1/2 in.Design load 1,200 lb
US562 For rod size 1/2 in.Design load 800 lb
U562 For rod size 1/2 in.Load rating 500 to 800 lb
U563 For rod size 3/8 in.Load rating 240 to 400 lb
— Channel support beam clamps
A597 Load rating 800 lb
2-1/4
7/8
3-1/2
1-3/4
3-1/2
2-7/82-7/82-7/8
2-5/81-1/4
7/82-1/4
1-7/81
3/41-21/32
"C" Set screw incluced
Tappedhole size
U564 For rod size 3/8 in. -1/2 in. -5/8 in.Load rating 1,300 to 3,150 lb
1-5/83/8
3
2 holes9/16 dia.
1
1
1-1/4
1-1/4
A
2-3/8
13/16
512U Load rating 800 to 1,000 lb
U501-U502 Load rating 2,150 to 3,000 lb.
U510 Load rating 800 to 1,000 lb
U514 Load rating 750 lb per pair
U514A Load rating 1,650 lb per pair
U515 Load rating 800 lb
1-1 ⁄4
3⁄8
7⁄8
GID
7T
KK
00
08
54
-EN
07.
2019
—ABB Electrification Canada ULCInstallation Products700 Thomas AvenueSaint-Jean-sur-Richelieu, Quebec J2X 2M9Tel.: +1 (450) 347 5318Toll Free: +1 (800) 362 2952Fax: +1 (450) 347 1976
—Regional Sales Offices
Atlantic ProvincesTel.: +1 (902) 450 1307Toll Free: +1 (877) 862 4357Fax: +1 (902) 450 1309
QuebecTel.: +1 (450) 466 1102Toll Free: +1 (800) 465 1399Fax: +1 (450) 466 1163
OntarioTel.: +1 (905) 635 7888Toll Free: +1 (877) 291 7771Fax: +1 (905) 635 7889
Manitoba / SaskatchewanTel.: +1 (604) 598 9811Toll Free: +1 (866) 540 8220Fax: +1 (604) 598 9840
AlbertaTel.: +1 (780) 424 7092Toll Free: +1 (888) 664 5666Fax: +1 (780) 424 7093
British ColumbiaTel.: +1 (604) 598 9811Toll Free: +1 (866) 540 8220Fax: +1 (604) 598 9840
tnb.ca.abb.com
© Copyright 2019 ABB. All rights reserved.Specifications subject to change without notice.