Embed Size (px)
Citation preview
2018Build your Smart City
Build the city of the future
SMART CONNECTED L I G H T I N G
SMART SYSTEM
32
WITH
AEC SMART SYSTEM THE CITY BECOMES SMART AND CONNECTED
Cities around the world are growing and it is increasingly difficult to
manage mobility, ensure security and meet the increasing needs of
citizens. Cities must evolve quickly, becoming interconnected and
able to combine savings, safety and livability.
BUILDING THE
CITY OF THE
FUTURE SMART AND CONNECTED LIGHTING
48 Sport and wide area lighting
50 Street lighting
52 Street adaptive lighting
CONTENTS
06 BUILDING THE CITY OF THE FUTURE
08 SMART SERVICES OF AEC SMART SYSTEM
18 SYSTEM ARCHITECTURE
20 SYSTEM COMPONENTS
22 SMART NODE WL
26 GATEWAY GTW
30 CMS CITY SMARTWAY
34 SYSTEM INTEROPERABILITY
36 SMART LIGHTING FEATURES
42 STAND-ALONE SOLUTION
46 QUICK4LIGHT
56 OPTIMIZATION OF SYSTEM COSTS
58 SMART KIT
62 BASIC KIT
66 BROADBAND SERVICES
68 START-UP AND ASSISTANCE
70 CERTIFICATION OF AEC SMART SYSTEM
42 DIM-AUTO Wireless
44 Motion sensor
54
AEC SOLUTIONS
AEC ILLUMINAZIONE has been a leader in the world of outdoor public lighting since 1957. For over 60 years, the company has been designing lighting systems able to fully meet the stringent demands of the sector, ensuring energy savings, road safety and environmental sustainability.
Today, AEC engages in the research and development of Smart connected systems that allow activating countless intelligent
and public administrations.
76
For citizens and administrations
For energy savings
For an intelligent investment
AEC Smart System allows creating a communication network that makes
AEC Smart System becomes an economic opportunity for the operator, who
BUILDING THE CITY OF THE FUTURECities around the world are growing and it is increasingly difficult to manage mobility, ensure security and meet the increasing needs of citizens. Cities must evolve quickly, becoming interconnected and able to combine savings, safety and livability.
AEC Smart System represents a
network, as they use the same
open platform, the costs of interfacing
technology for energy saving, can
The AEC Smart System control system
city, which allows integration with other services (such as Smart Parking, Smart
98
SMART LIGHTING
Lighting management
guarantees a perfect regulation of systems from single lighting point to
Adaptive lighting
Motion sensors
Detecting anomalies and consumption
AEC Smart System is also very useful for the remote monitoring of the
Parking occupancy detection
1110
SMART PARKING SMART TRACKING
Car/bike sharing geolocation
People geolocation
wearable sensors (tags
are, thanks to the signal that is constantly sent by the sensor to the lighting
Bus tracking
monitoring of their position thanks to triangulation algorithms of the
1312
SMART ENVIRONMENT
Gas and Water metering
SMART METERING
Integration of environmental sensors
Integration of weather sensors
Irrigation system management
The technology of AEC Smart System allows better management of water resources in public irrigation systems by being able to
1514
SMART INFORMATION SMART IRRIGATION
Digital message panels
Proximity tourist information
Checking waste levelC
1716
SMART WASTE MANAGEMENT
BROADBAND SERVICES
Wi-Fi access point
Video surveillance
Audio diffusion
MOBILE
MOBILEETHERNET
MOBILEETHERNET
FIBER
SERVER DITERZE PARTI
OPEN PROTOCOL
WEB
1918
AEC Smart System is a management platform that combines the advantages of a modern remote control system of individual lighting points with the possibility of integrating Smart services.
AEC Smart Node
Wireless Sensor Network (WSN)The capillarity of the lighting system allows almost total coverage over
network to the GTW Gateways
the electrical cabinet or in positions
CMS City SmartWay
The City SmartWay management
applications to enable the activation
The sensorsWireless Sensor Network (WSN),
Smart System is an open platform
GATEWAY GTWSMART NODE CITY SMARTWAYSYSTEM ARCHITECTURE AEC SMART SYSTEM
THIRD-PARTY SERVER
19
Ø53
2120
SYSTEM COMPONENTS SMART NODEThe AEC radio tele-management node is typically installed inside the fixtures and is equipped with a transmission antenna installed on the external frame without affecting the protection level of the fixtures.
21
WIRELESS SENSOR NETWORK
H24 OPERATION
AUTOMATIC DIMMING
INTEGRATED SENSORS
accelerometer/inclinometer able to signal any anomalous
DALI/1-10 INTERFACE
INTERFACE FOR EXTERNAL SENSORS
REMOTE UPGRADE
The antenna, particularly compact and contained in terms of dimensions, allows minimizing the aesthetic impact of the radio technology on the fixtures.
AEC Smart Node integrated in the fixture.
2322
AVAILABLE VERSIONS OF SMART NODE
AEC Smart Node allows direct connection to other radio communication infrastructures or third-party systems, by integrating additional modules that coexist with the 2.4GHz communication module. This way, the existing MESH network can be combined with other types of network (star, long range, etc.) to meet the multiple needs of Smart Cities.
SMART METERING2G/3G GATEWAY
the AEC City SmartWay platform without
LoRa NB-IoT
Bluetooth
from the most common personal mobile
GPS
geolocation of the lighting point
INTEGRATED NODE
NEMA 7 PIN NODE
ZHAGA NODE
in a version compatible with the Zhaga connection
110
5929
35
Ø82
99
Ø84.5
2524
SMART NODE INTEGRATED AND CERTIFIED TECHNOLOGYThe fixtures of AEC Illuminazione with integrated radio node, are tested in certified company laboratories, fully meeting all the regulatory requirements.
The use of radio technology involves the use of additional electronic modules normally not provided for in lighting products; however, it is necessary that the fixture including the remote control module continues to fully satisfy all the requirements laid down by EU directives and product standards for CE marking.
AEC fixtures equipped with AEC Smart Node are also covered by third-party ENEC certifications.
The electrical safety of the
thermal, insulation, leakage current, protection against the
the RED directiveto guarantee no interference in
the TETRA band
security communications or
compliance with the limits set for human exposure to
Within the electromagnetic compatibility laboratory, AEC
protection against interference
overvoltage protection, which is generally a critical parameter
ELECTROMAGNETIC COMPATIBILITY
ELECTRICAL SAFETY
RADIO DEVICES
“”
The nodes of the wireless sensor network transmit up to a distance of 100 meters, the best compromise
between transmission reliability and low power communication, limiting electromagnetic pollution.
160mm
90m
m
32m
m
2726
The extreme compactness and modularity of the components of AEC Smart System, such as the Gateway GTW, allow fully exploiting the existing space in the electrical cabinet, without requiring a complete redesign.
SYSTEM COMPONENTS GATEWAY GTW
SMARTMETER
THIRD PARTY SERVERFOR BILLING
MOBILEETHERNET
FIBER
AEC OPEN PROTOCOL
169MHzWMBUS
2.4GHzWSN
GATEWAY GTW with additional
radio module forsmart metering
COORDINATORMCW
2928
ADVANTAGES OF THE GTW GATEWAY
Reliable communication with the Wireless Sensor Network
continues to operate even in the event of communication anomalies or maintenance
Optimization of the communication channel
Integration with other networks for Smart Metering
metering of the various utilities such as
communication channel to the control
3130
MANAGEMENT AND CONTROL PLATFORM CMS CITY SMARTWAY
ALARMS AND MAINTENANCE
SYSTEM INFORMATION MANAGEMENT
DIMMING GROUPS AND PROFILES
H24 ONLINE SYSTEM
can thus communicate the information necessary to
ANALYSIS OF DATA AND REPORTS
VS
60%
90%
40%
70%UPGRADE
UPGRADE
60%
90%40%
70%
3332
MANAGEMENT AND CONTROL PLATFORM CMS CITY SMARTWAY
INSTALLATION ON CLOUD OR SERVER
cloud installation, the customer
installation on the client's server allows
REAL-TIME INTERACTIVITY
maps that allow monitoring in real time the resources
DATA SECURITY
WEB RESPONSIVE INTERFACE
REMOTE UPDATE
MQTTSAP
FIWAREEMAILHTTPFTPJMSJMX...
3534
SYSTEM INTEROPERABILITY
SMART NODE FOR THIRD-PARTY DEVICES
GRAPHIC INTERFACE
The operator can monitor the resources
PROTOCOLS FOR SMART CITY
The system implements the main
Communication with these protocols
AEC OPEN PROTOCOL
is possible to interact completely with
OTHER PROTOCOLS
the system allows implementing
protocols commonly
of information to
CITY SMARTWAY
The central server allows
3736
SMART LIGHTINGMANAGING DIMMING GROUPS
REGULATION WITH CALENDAR
AEC Smart System allows regulating lighting at different levels, for perfect management of the systems.
implementation priorities to a
to simplify planning even in the
(recurring parties, particular
it possible to activate lighting even
lighting regulation, by acting on a
The lighting scenarios are
The CMS City SmartWay implements an astronomical clock that can precisely calculate
to this, it is possible to regulate
there is an astronomical clock that activates autonomously in case of communication failure with the control software, ensuring power
ASTRONOMICAL CLOCK RECURRING EVENTS SPOT EVENTS
MANAGING GROUPS
MANAGING SINGLE POINTS
3938
SMART LIGHTINGREGULATION WITH SENSORSAEC Smart System allows regulating lighting even with the help of information from sensors throughout the city.
The system makes it possible to activate particular lighting scenarios
With the CMS City SmartWay, it is
The software processes the
regulation, the system meets the
The system allows regulating in real
a cycle path can be kept at minimum
system can integrate luminance,
EXTERNAL COMMANDSMOTION SENSORSTRAFFIC ADAPTIVE INSTALLATION (TAI)
FULL ADAPTIVE INSTALLATION (FAI)
4140
SMART LIGHTING ADAPTIVE LIGHTING
Since AEC Smart System can manage signals from appropriate traffic, weather, luminance and lighting sensors, it allows implementing lighting regulation in an adaptive way, i.e. according to the real road operating conditions or the use of the illuminated environments.
ADAPTIVE SYSTEMS BASED ON LUMINANCE/LIGHTING AND WEATHER TRAFFIC FAI (Full Adaptive Installation)
ADAPTIVE SYSTEMS BASED ON TRAFFIC FLOWS TAI (Traffic Adaptive Installation)
from one lighting category to the higher one in the event of an
The EN 13201-1 standard introduces regulatory appendix D, dedicated to adaptive lighting and proposes two possible solutions for the optimization of consumption and extension of the life of systems.
WL ToolNodes configuration software
WSN Communicationmodule - USB connection
4342
The flexibility of the radio communication can be used to realize simple installation of luminaires with stand-alone automatic dimming profile. The dimming profile can be re-programmed and modified after the installation thanks to a configuration software running in a laptop with a simple dongle USB device radio-connected to the luminaires.
With this installation, the mesh network is immediately built and ready to be expanded for future use.
USB DONGLE RADIO
WL TOOL
SMART NODE WL
STAND-ALONE SOLUTIONDIM-AUTO WIRELESS
4544
MOTION SENSOR
USB DONGLE RADIO
WL TOOL
A Pir Motion sensor connected to the mesh network can be used to dynamically regulate the light of single or group luminaires. It is possible to enable “light-on-demand” in dynamic contexts using the direct luminaire-to-luminaire radio communication. Typical application could be on cycle paths, in order to have a “following light” effect, or in a pedestrian crossing for regulating and increasing the light levels when a pedestrian is near the zebra crossing. Start-up configuration can be carried out from a configuration software running in laptop with a simple dongle USB device radio-connected to the luminaires. With this installation, the mesh network is immediately built and ready to be expanded for future use.
STAND-ALONE SOLUTIONMOTION SENSOR
quick4light
4746
The power and flexibility of the AEC Smart System can also be used in small lighting systems.
In these cases, in addition to automatic regulation of lighting, it is possible to manage the luminous flux according to the specific needs of the moment by means of real-time control of the system.
Intuitive interface
Real-time control
Integrated web server
All the necessary operations for remote and real-time control of the system take place through a simple and intuitive interface, also accessible from smartphones, without the use of external dedicated servers.
“”
Quick4Light: the simplicity of managing an Indoor system in an
outdoor lighting system.
STAND-ALONE SOLUTIONQUICK4LIGHT
quick4light
Light level regulationthrough Smartphone
(Web Browsing)
Power supply 24Vdc
LAN or INTERNET
SMART PLC
Light level regulationthrough remote
touch panel
WSN Coordinator MCW
AEC luminairesequipped with
AEC Smart Node
GATEWAY GTW
AUXILIARYPOWER SUPPLY
MOBILE / ETHERNET
Overrides and signalingON/OFF
M-IODevices
X
kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkttttttt44lighhhhhhhhttttttttttttttttttttttttttttttttttt
quick4light
4948
The SPORT AND WIDE AREA KIT allows the control of the connected fixtures via a web interface resident in the cabinet.
Through Smart PLC, a component specially designed by AEC, it is possible to control the system power ON and OFF or read information from the installed devices.
The remote connection to this system, which is typically from smartphones and tablets, is possible in two ways: with a 2G/3G/4G or Ethernet connection.
2G/3G/4G MOBILE VERSION
ETHERNET VERSION
STAND-ALONE SOLUTIONQUICK4LIGHTSPORT AND WIDE AREA LIGHTING
quick4light
Power supply 24Vdc
LAN or INTERNET
SMART PLC
WSN Coordinator MCW
AEC luminairesequipped with
AEC Smart Node
Panel Feeding
MOBILE / ETHERNET
Overrides and signalingON/OFF
X
GATEWAY GTW
M-IODevices
AUTOMATIC DIMMING PROFILE
based on astronomical clock
100% 100%
6.0050%
0 6
10%
00.00
0%
5150
STAND-ALONE SOLUTIONQUICK4LIGHTSTREET LIGHTING
The STREET LIGHTING KIT allows the control of different groups of fixtures according to calendar based dimming profiles. Through Smart PLC, a component specially designed by AEC, it is possible to control the light level of the luminaires, the system power ON and OFF or read information from the installed fixtures. It is possible to configure and monitor the whole system using the web interface resident in the cabinet.
The remote connection to this system, which is typically from smartphones and tablets, is possible in two ways: with a 2G/3G/4G or Ethernet connection.
2G/3G/4G MOBILE VERSION
ETHERNET VERSION
Street lighting regulation calendar based
quick4light
Power supply 24Vdc
LAN or INTERNET
SMART PLC
WSN Coordinator MCW
AEC luminairesequipped with
AEC Smart Node
Connection BOX on pole
Panel Feeding
MOBILE / ETHERNET
Overrides and signalingON/OFF
X
GATEWAY GTW
Traffic, luminance andweather sensor
M-IODevices
5352
STAND-ALONE SOLUTIONQUICK4LIGHTSTREET ADAPTIVE LIGHTING | TAI and FAI KIT
The ADAPTIVE LIGHTING KIT allows the control of the fixtures according to the level of traffic (TAI KIT) or combined traffic, weather and luminance sensor (FAI KIT). Through Smart PLC, a component specially designed by AEC, it is possible to control the light level of the luminaires, the system power ON and OFF or read information from the installed fixtures. It is possible to configure and monitor the whole system using the web interface resident in the cabinet.
The remote connection to this system, which is typically from smartphones and tablets, is possible in two ways: with a 2G/3G/4G or Ethernet connection.
2G/3G/4G MOBILE VERSION
ETHERNET VERSION
TAI Dimmer Value: 50%Vehicle per Hours: 80 Numer of total vehicles: 500
5554
QUICK4LIGHT KIT KIT COMPONENTS
SMART PLC
GTW GATEWAY
MCW WSN COORDINATOR
24Vdc POWER SUPPLY
2G/3G ANTENNA
OPTIONAL COMPONENTS
POWER METER WITH TA
M-IO DEVICES
DIGITAL INTELLIGENT CAMERA KIT
BACKUP PHOTOCELL
USB DONGLE RADIO
WL TOOL
5756
OPTIMIZATION OF SYSTEM COSTS
The SMART KIT connects the control system
With the 3G/LAN BASIC KIT it is possible to perform a simple cabinet control where it is not necessary to
The AEC Smart System allows avoiding the installation of a SMART KIT for each single cabinet. With the BASIC KIT, WSN extensions can be implemented or simple cabinet controls with a view to minimizing initial installation costs.
The WSN H24 BASIC KIT
AEC Smart Node in the NEMA 7 PIN 2G/3G Gateway
Please, check the SMART NODE characteristics at page 20 - 25
MOBILE / ETHERNET
Gateway GTW
AUXILIARYPOWER SUPPLY
Power supply 24Vdc
Overrides and signaling
Panel controlON/OFF
WSN CoordinatorMCW
MAIN
POWER SUPPLY
Luminaire equipped with
AEC SMART NODE
WIRELESS SENSOR NETWORK
2.4GHz IEEE 802.15.4
X
X
Power Meter
5958
Activation of Smart ServicesThis kit allows creating a communication network that makes it possible to
Cabinet control
Smart Lighting
ELECTRICAL CABINET COMPONENTSSMART KIT SMART KIT allows realizing the communication infrastructure with lighting points equipped with Smart Node and activating Smart services. It allows complete control of system power ON and OFF and connection with the AEC City SmartWay control software.
Remote connectivity to this cabinet is available in two versions: Mobile 2G/3G or 4G and Ethernet.
The Gateway GTW includes both types of connection without requiring additional devices. To activate mobile connectivity, just add a simple communication antenna.
6160
SMART KIT KIT COMPONENTS
GTW GATEWAY
MCW WSN COORDINATOR
24Vdc POWER SUPPLY
2G/3G ANTENNA
OPTIONAL COMPONENTS
POWER METER WITH TA
M-IO DEVICES
LIGHT SENSOR
DIGITAL INTELLIGENT CAMERA KIT
BACKUP PHOTOCELL
USB DONGLE RADIO
WL TOOL
MOBILE / ETHERNET
M-IO devices
AUXILIARYPOWER SUPPLY
Power supply 24Vdc
Overrides and signaling
Panel controlON/OFF
MAIN
POWER SUPPLY
X
X
Luminaire AEC
Power Meter
6362
ELECTRICAL CABINET COMPONENTSBASIC KIT The BASIC KIT allows control of system power ON and OFF remotely. Many options are available for electrical consumption metering of the system and signals from external devices.
Cabinet control
The
Compact solution
System optimization
2G MOBILE VERSION
ETHERNET VERSION
WSN VERSION
The BASIC KIT is available in three versions depending on the connectivity required to the Server.
6564
M-IO WSN
M-IO 2G/3G
Master port for connection to the Power Meter or other
M-IO LAN
M-IO 485
M-IO 3OUT5IN1A
24Vdc POWER SUPPLY
2G/3G ANTENNA
BASIC KIT KIT COMPONENTS OPTIONAL COMPONENTS
POWER METER WITH TA
M-IO DEVICES
BACKUP PHOTOCELL
6766
BROADBAND SERVICES MOD 2.0 TOWERAEC Smart System provides smart broadband solutions such as video surveillance, Wi-Fi coverage and sound diffusion thanks to MOD 2.0 Tower: the modular and flexible solution for Smart cities.
MOD 2 .0 TOWER
AEC SMART NODE
SMART MODULES
10025
041
4
178
450
205
414
178
414
178
AUDIO SPEAKER
MOTION SENSOR
WI-FI ACCESS POINTS
to real access point infrastructures for more complete
VIDEO SURVEILLANCE CAMERA
GPS
6968
AEC SMART SYSTEM START-UPWith AEC Smart System, the installation and start-up of lighting points is extremely simple and fast.
The application on the smartphone, scanning the
ASSISTANCE H24 7/7
A professional and technically prepared call center is always available to meet every maintenance and configuration request of the AEC Smart System.
B.V.
© Integral publication of this certificate and adjoining reports is allowed
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
-
-
2
2
- -
--
201709- -
7170
CERTIFICATIONS OF AEC SMART SYSTEM
ISO 9001 ISO 14001 ISO 18001
Fixtures and LED modules electrical safety
Photobiological safety
Electromagnetic compatibility
Vibration resistance
Radio devices
ELECTRICAL SAFETY
ELECTROMAGNETIC COMPATIBILITY
ART DIRECTIONCOORDINATION - COPYWRITING - EDITING
MARKETING & COMMUNICATION Dept. ALESSIA CINI
MICHELA MARIANI
PRINTING
GRAFICHE BADIALI
COPYRIGHTAEC ILLUMINAZIONE
MAY 2018
AECMARKETING ANDCOMMUNICATION DEPT
AEC Illuminazione Srl I-52010 Subbiano - Arezzo - Italy Via A. Righi 4 - Zona Industriale CastelnuovoTel. +39 0575 041110 - Fax +39 0575 [email protected] - www.aecilluminazione.com
![Vol 8 Gtw Final[1]](https://img.pdfslide.us/doc/110x75/54841dfd5806b5c7588b45d7/vol-8-gtw-final1.jpg)
