Brochure Metrology Line

MEASURING METHOD: UCI — Ultrasonic Contact ImpedanceA hardness testing method based on the measurement of the frequency shift of aresonating rod caused by the essentially elastic nature of the finite area of contactbetween the indenter and the test piece during the penetration. Described as a hardnesstesting practice using a calibrated instrument by pressing a resonating rod with a Vickersstyle Diamond indentor with a fixed force against the surface of the part to be tested.

The PHASE II ultrasonic/dynamic portablehardness testers are capable of measuringthe surface hardness of a broad variety ofmetals on flat, round, thin or large surfaces.Unlike the standard Dynamic hardnesstesters, these “state-of-the-art” portablehardness testers incorporate “UltrasonicUCI” technology, which enables the hardnesstesting of very thin and small workpieces,which otherwise could not be tested accuratelyusing a portable device. Non-destructive init’s function, these hardness testers allow forthe testing of highly sensitive or finishedparts that previously could not be tested inan operational setting. The non-destructive(ndt) feature of these hardness testers allowthe operator to accurately test parts withoutcausing physical or structural damage thatwould normally lead to disposal or refinishof operators part.

FUNCTIONS: MET-U1A and MET-UDA• Perform hardness tests on variety of metals from thin to very large parts• Display test results in all various hardness scales: Scales: HRC, HRB, HRA, HB, HV,

HRN, HRT, HS, HLD• Printout to PC via USB interface w/ extended memory locations

MET-U1A Hardness Tester (MET-U1A and UDA )Standard Accessories:• Base Instrument• 10N (1kgf) Hand-Held Probe• Calibrated HRC Test Blocks• Custom Carry Case• Battery Charger• Operation ManualFunctions:• Easy To Read Menu Operation• Large LCD Display w/ Back Light• USB Interface• Automatic Conversions to: Brinell, Rockwell, Vicker and Leeb• Automatic Mean Value• Data Archive Capacity

Specifications:• Tolerance +/- 3.6% deviation of average from the

reference value of the test block with a minimum of 5 tests

• Minimum Thickness of sample: .040”/1mm• Materials: steel & cast steel, alloy tool steel, stainless

steel, grey cast iron, spheroidal iron, cast aluminum,brass, bronze, wrought copper alloy.

• Battery type: NiMH Re-Chargeable (4xAA)• Operating temperature: 5-104 degrees F• Dimensions: 7.25” x 3.16” x 1.68” (HxWxD)• Weight: 1.7 lbs (UD)

The PHASE II ultrasonic hardness testers are capable of measuring the surface hardness of a broadvariety of metals on flat, round, thin or large surfaces. Accurate measurements of steel, cast steel, alloysteel, gray cast iron, cast iron, cast aluminum alloy, brass, bronze and copper are easily attained withthis compact instrument.

Dynamic Hardness Tester MET-1000 Precision Test Stand

SCALES MEASUREMENT RANGE

Rockwell C 20-67 HRC

Rockwell B 59-99 HRB

Brinell 75-650 HB

Vickers 75-1000 HV

Leeb 200-900HL

HRA 20-88 HRA

HRN 20-91 HRN

HRT 12-82 HRT

HSD 23-102 HSD

TEST DEVICEU1

(UCI)D1

(DYNAMIC)

Length 160mm 140mm

Diameter 25mm 25mm

Indentation Depth 30µm 300µm

Pressure Force 14.7N 11Nm

Transducer Test Life(approx)

200,000 50,000

Min. Thickness for test

1mm 12mm

Min. Radius for Test 5mm 10mm

Max Roughness of surface

Ra 2.5µm Ra 3.2µm

Max Archive 100 Tests 100 Tests

Time of Test 4 sec. 2 sec.

Non-Destructive!Non-Destructive!

PHT-4000 Top of the Line! Portable Hardness TesterOur latest Top of The Line portable hardness tester is a direct result of our relentless pursuit to bring you the latest, State-Of-The-Art, WORLD-CLASS, portablehardness testers.

This multi-functional instrument allows not only portability, but secure fixed positioning by a convenient flip stand mounted on the rear of the casing.Physically robust, the Phase II PHT-4000 is designed and engineered to perform in the most rigorous of environments, all the while providing highly sensitiveand accurate readings.

This portable hardness tester utilizes external probes, offering greater versatility when specialized applications arise. This is a decided advantage over inte-grated/fixed probe style portable hardness testers.

Our industry leading interface enables users to easily manipulate multiple statistical and printing features all viewed on the large LCD screen. Lightning fastresults are easily obtained in Rockwell, Brinell, Vickers, Leeb, and Shore hardness scales.

U

PHT-2500D Portable hardness testerPortable hardness tester w/Mini-PrinterState of the art, digital tester is a menu driven, multi-functional unit with extended memoryand RS 232 output capabilities. This unit can perform tests that easily convert to every popularhardness scale, including Rockwell, Brinell, Vickers, Shore, etc. Protective leather wrist strapincluded! Simply put, it’s the most versatile, accurate, hardness tester on the market today!PHT-2550D comes supplied with Mini-Printer, PC Cable, A/C Adapter and H/D Carry Case.

Operation:• Load the impact body• Place the impact body on your

test piece• Push the button to begin testing

and obtain readingFunctions:• Easy to read menu operation• Large LCD display with

back light• RS 232 interface• Automatic conversions to:

Brinell, Rockwell, Vicker and Shore

• Automatic mean value• Data storage capacity

Specifications:• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool

steel, stainless steel, grey castiron, spheroidal iron, castaluminum, brass, bronze,wrought copper alloy.

• Battery type: AAA alkaline (2)• Operating temperature: 5-104 degrees F• Dimensions: 108 x 62 x 25mm• Weight: 230 grams• Minimum Thickness 0.500 Steel

Standard Accessories:• Base instrument• Impact device D• Calibrated test block• Custom carry case• Cleaning brush• Operation manual• Protective Wrist BandOptional Accessories:• Micro printer• Impact devices; DC, D+15, DL, G, C• Special support rings• Printer cable

Operation:• Load the impact body• Place the impact body on your test piece• Push the button to begin testing and obtain readingStandard Accessories:• Base instrument• Impact device D• Calibrated test block• Heavy Duty Rubber Casing w/Carry Strap• Custom carry case• Cleaning brush• Operation manual

Optional accessories:• Impact devices; DC, D+15, DL, G, C• Special support ringsFunctions:• Easy to read menu operation• Large LCD display with back light• USB Ouput• Automatic conversions to: Brinell, Rockwell, Vicker • and Shore• Automatic mean value as well as Min & Max values• Multi-Functional Data storage capacity

Specifications:• Accuracy: +/- 0.5% (referred to L=800, • Repeatability accuracy: +/- 4L units) L=Leeb• Measuring range: 200-960 HL• Materials: steel & cast steel, alloy tool steel,

stainless steel, grey cast iron,• spheroidal iron, cast aluminum, brass, bronze,

wrought copper alloy.• Battery type: AAA alkaline (4)• Operating temperature: 5-104 degrees F• Dimensions: 108 x 62 x 25mm• Weight: 230 grams

MATERIAL HRC HRB HB HV

STEEL & CAST STEEL 20-68 60-100 93-674 83-976

COLD TOOL STEEL 20-67 80-898

STAINLESS STEEL 20-62 46-100 85-655 85-802

GREY CAST IRON 93-334

NODULAR CAST IRON 131-387

CAST ALUMINUM ALLOYS 27-159

COPPER/ZINC ALLOYS (BRASS) 13-95 40-173

CuAI/CuSn ALLOYS (BRONZE) 60-290

WRAUGHT COPPER ALLOYS 45-315

Multi-functional and extremely rugged, this hardness tester can take the abuse in almost any environment!Optional accessories include a 12pc set of Support rings to meet the requirements of testing convex or concave applications.

See available impact devices on Page 7


5 Year

Warranty

5 YearWarranty

PHT-2000The PHASE II hardness tester, Model No. PHT-2000 is an advanced integrated hardnesstester distinguished by its very compact size, high accuracy, wide measuring range andsimplicity of operation. It is suitable for testing the hardness of all metals and widelyapplied in many areas of industry.

The PHT-2000 hardness tester combines the universal impact device D and a data processorin a single unit. It automatically computes all Vickers, Brinell, Rockwell and Shore hardnessvalues. RS232 output enables this new model to print any of it’s memory from up to 2000locations. The impact direction can be set so that the accurate values can be achieved atany angle, even upside down! Statistical mean value is automatically provided.

The measuring method of the PHT-2000 is defined as “the quotient of the impact body’srebound velocity over its impact velocity”. Optional accessories include various supportrings to meet the requirements of specialized convex or concave applications.

MATERIAL HRC HRB HB HV HS

STEEL & CAST STEEL 20-68 60-100 93-674 83-976 32-100


STAINLESS STEEL 20-62 46-100 85-655 85-802







MATERIALS AND TESTING RANGE PHT-2000 (HL:200-900)

Dimensions 6.10” x 2.36” x 1.49” (155 X 60 X 38mm)

Impact Device D

Impact Energy 8 Ft-Lbs (11nmm)

Test Tip Tungsten Carbide

Max. Hardness Of Sample 980hv

Weight 0.48lb (220g)

Impact Direction: Any Angle

Operating Temperature 32 To 122 Degrees F (0 To 50 Degrees C.)

Min. Thickness Of Sample 0.2in (5mm) (Coupled: 3mm)

Min. Weight Of Sample 11 lbs / 5kg (Less than 5kg To 0.1kg Coupled On Solid Support)

Min. Thickness Of Layers 0.8mm

Min. Radius Of Curved Surface 1.2in (30mm) (With Support Rings:11mm)

Power 2–AAA Batteries (supplied)

Minimum Thickness .0500 Steel

This Multi-Functional hardness tester is capable of utilizinga variety of External Impact Devices to greatly expand itshardness testing capabilities. This is virtually the mostversatile portable hardness tester on the market today!


Dimensions 6.10” x 2.36” x 1.49” (155 X 60 X 38mm)Impact Device DImpact Energy 8 Ft-Lbs (11nmm)Test Tip Tungsten CarbideMeasuring Accuracy +- 0.8% (Corresponding To +- 1 Hrc At Hrc=58)Max. Hardness Of Sample 980hvWeight 0.48lb (220g)Impact Direction Any AngleOperating Temperature 32 To 122 Degrees F (0 To 50 Degrees C.)Min. Weight Of Sample 11 lbs / 5kg Min. Radius Of Curved Surface 1.2in (30mm) (With Support Rings:11mm)Power 2- AAA Batteries (supplied)

TECHNICAL SPECIFICATIONS

MATERIAL HRC HRB HB HV HS

STEEL & CAST STEEL 20-68 60-100 93-674 83-976 32-100


STAINLESS STEEL 20-62 46-100 85-655 85-802







MATERIALS AND TESTING RANGE PHT-2700 (HL:200-900)

The Phase II Tester PHT-2700 Comes Complete With a Calibrated Test Block, Plastic Fitted Case and Operation Manual.

5 Year

Warranty

PHT-2700 $2,495The PHASE II hardness tester, Model No. PHT-2700 is an advanced integrated hardness tester distinguished by its very compact size, high accuracy,wide measuring range and simplicity of operation. It is suitable for testing the hardness of all metals and widely applied in many areas of industry.

The PHT-2700 hardness tester combines the universal impact device D and a data processor in a single unit. It automatically computes all Vickers,Brinell, Rockwell and Shore hardness values. RS232 output enables this new model to print any of it’s memory from up to 2000 locations. The impactdirection can be set so that the accurate values can be achieved at any angle, even upside down! Statistical mean value is automatically provided.

The measuring method of the PHT-2700 is defined as “the quotient of the impact body’s rebound velocity over its impact velocity”. Optional accessories include various support rings to meet the requirements of specialized convex or concave applications.

5 YearWarranty

“D” Impact DeviceUniversal standard unit. Will handle themajority of hardness testing applications. Weight: 75g.

“G” Impact DeviceThis device has an enlarged test tip, and anincreased impact energy range (approx. 9times the D, 72 ft-lb.). Can be used on lowerquality finishes for measuring hardness inthe Brinell range only (max. 650 HB).Designed to be used with heavy componentssuch as heavy castings and forgings. Weight: 250g.

“DL” Impact DeviceThis model features a needle front section with a diameter of 4mm and a lengthof 50mm. It is suitable for testing in extremely confined spaces, thebase of grooves and on special components such as as gear wheels. For use on steel and cast steel only!

12pc Universal Support Ring SetModel No. PHT1100-500 $169This kit comes complete with 6-concave rings, 5 convex ringsand 1- small stand for difficult to test round or curved parts.

“DC” Impact DeviceVery short impact device for those confined areas,i.e. inside bores for internal measurements.Conforms to the D measuring range. Weight: 50gFits PHT-2500 only.

“D+15” Impact DeviceVery narrow contact area with a set back measurementcoil. This device is used to measure hardness ingrooves and recessed surfaces. Weight: 80g.

“C” Impact DeviceA reduced energy impact device for measur-ing the hardness of Case Hardened Steelonly. Applies a small superficial indentation.Weight: 75g.

PHT1300-01 HLD Test Block (for use with all “D” type Impact Devices)

PHT1100G-01 HLG Test Block (for use with “G” Impact Device)

PHT1300-01C NIST Traceable Certificate (Rockwell C Scale Only)

IMPACT DEVICES D/DC/DL D+15 C GIMPACT ENERGY 11Nmm 11Nmm 3Nmm 90NmmMASS OF THE IMPACT BODY 5. 5g 7. 8g 3. 0g 20g

DL: 7.3gTEST TIP

* Hardness 1600HV 1600HV 1600HV 1600HV* Diameter 3mm 3mm 3mm 5mm* Material Tungsten Tungsten

carbide carbideIMPACT DEVICE

* Diameter 20mm 20mm 20mm 30mm* Length 147/86mm 162mm 141mm 254mm* Weight 75/50g 80g 75g 250g

MAX. HARDNESS OF SAMPLE 940HV 940HV 1000HV 650HBPREPARATION OF SURFACE

* Roughness class ISO N7 N7 N5 N9* Max. roughness depth Rt 10 m m 10 m m 2.5 m m 30 m m* Average roughness Ra 2 m m 2 m m 0. 4 m m 7 m m

MIN. WEIGHT OF SAMPLE* Of compact shape 5kg 5kg 1.5kg 15kg* On solid support 2kg 2kg 0.5kg 5kg* Coupled on plate 0. 1kg 0. 1kg 0. 02kg 0. 5kg

MIN. THICKNESS OF SAMPLE* Coupled 3mm 3mm 1mm 10mm* Min. thickness of layers 0. 8mm 0. 8mm 0. 2mm -

INDENTATION OF TEST TIPWith 300 HV

* Diameter 0. 54mm 0. 54mm 0. 38mm 1.03mm* Depth 24 m m 24 m m 12 m m 53 m m

With 600 HV* Diameter 0. 45mm 0. 45mm 0. 32mm 0. 90mm* Depth 17 m m 17 m m 8 m m 41 m mC

With 800 HV* Diameter 0. 35mm 0. 35mm 0. 30mm -* Depth 10 m m 10 m m 7 m m -

Technical Data for Impact DevicesNote: Impact device D is standard device on all models. Specification is identical.

Model No. Description Price

PHT2000-110 D+15 Impact Device $875.00

PHT2000-115 DL Impact Device $1,450.00

PHT2000-125 G Impact Device $1,650.00

PHT2000-130 C Impact Device $829.00

PHT2500-110 D+15 Impact Device $875.00

PHT2500-115 DL Impact Device $1,450.00

PHT2500-120 DC Impact Device $850.00

PHT2500-125 G Impact Device $1,650.00

PHT2500-130 C Impact Device $829.00

C

DL

GD+15

DC

Accessories:• Designed to test Rockwell N

and Rockwell T scales• N-scale Diamond Indentor• 1/16” Steel Ball Indentor• 3- HRN Test Blocks• 3-HRT Test Blocks• Test Table 5.87” (150mm)• Flat Anvil 2.5” (63mm)• Spot Anvil .38” (10mm)• Std. Vee Anvil• Accessory Case• Dust Cover

Features:• Motor driven system provides

control of test force application• Direct analog dial reading• Engineered to obtain highly

sensitive and accurate readings• Perfect for laboratories, workshops,

tool rooms, inspection labs, etc.• For testing thin, soft material in

the Superficial Rockwell scales(900-340)

Minor Load 10 KgfMajor Load 15 Kgf, 30 Kgf, 45 KgfTest Force Application Dead WeightTest Force Control MotorizedResults Display Analog Dial GageVertical Capacity 6.7 in.Throat Depth 6.6 in.Height 28 in.Width 8.9 in.Depth 19.6 in.Shipping Weight 240 lbs

900-340 $3,200Just like our Phase II analog Rockwell Hardness Tester, the 900-340 SuperficialRockwell hardness tester comprises the very best in “state of the art” designcoupled with dynamic precision only found at Phase II. Used for testing thin andsoft material in the Superficial Rockwell hardness scales, this hardness testerutilizes a motor driven system for control of the major test force application. The900-340 is easy to operate yet engineered to obtain highly sensitive andaccurate readings. The 900-340 tester will offer unmatched repeatability in allSuperficial Rockwell hardness scales. A perfect, rugged performer suited foralmost any environment including heat treat facilities, tool rooms, workshops,laboratories and inspection labs. Lifetime technical support is included on allPhase II Hardness Testers. So test away with confidence and a level of accuracyyou will only find at Phase II.

900-331 $1800This hardness tester comprises the very best in “state of theart” design coupled with dynamic precision only found atPhase II. The 900-331 Rockwell scale hardness tester is easy tooperate yet engineered to obtain highly sensitive and accuratereadings. A perfect, rugged performer suited for almost anyenvironment including heat treat facilities, tool rooms, work-shops, laboratories and inspection labs. Lifetime technical sup-port is included on all Phase II Hardness Testers. So test awaywith confidence and a level of accuracy you will only find atPhase II.

Accessories:• C-scale Diamond Indentor• 1/16” Ball Indentor• 3- HRC Test Blocks• 1- HRB Test Block• 1-HRA Test Block• Test Table 5.87” (150mm)• Flat Anvil 2.5” (63mm)• Spot Anvil .38: (10mm)• Std. Vee Anvil • H/D Accessory Case• Dust Cover

Minor Load 10KgfMajor Load 60Kgf, 100Kgf, 150KgfTest Force Application Dead WeightTest Force Control Hydraulic Dashpot SystemResults Display Analog Dial GageVertical Capacity 6.7 in.Throat Depth 6.6 in.Height 30.0 in.Width 8.50 in.Depth 20.0 in.Shipping Weight 242 lbs.

5 Year

Warranty

5 YearWarranty

Accessories:• Diamond Conical Indentor• 1/16” Ball Indentor• 2- HRC Test Blocks• 1- HRB Test Block• 1- HR30N Test Block• 1- HR30T Test Block• Test Table 5.87” (150mm)• Flat Anvil 2.5” (63mm)• Spot Anvil .38” (10mm)• Std. Vee Anvil• Built-in Micro printer• RS232 Serial Port/Data Cable• Digital Test Counter• Statistics (avg, min, max, range, sd)• Accessory Case• Dust Cover

Major Load1837.5N / 2450N / 4900N7350N / 9800N / 29400N

Test Force Application Dead Weight

Test Force Control Motorized

Results Display Digital LCD

Vertical Capacity 9.44” / 240mm

Throat Depth 5.11” / 130mm

Height 30.51” / 775mm

Width 21.65” / 550mm

Depth 9.44” / 240mm

Shipping Weight 385 lbs

Features:• Digitally computes regular Rockwell® and

Superficial scales in one versatile tester• Easily converts scales with the push

of a button • Complete micro-computer controlled

operation affords highly sensitive andaccurate readings

• Extended memory of up to 9999 test results

• Conversions to: Brinel and Vickers hardness scales

• Built-in mini printer• 5 – Calibrated Test Blocks

900-370 $8,500The 900-370 Phase II Rockwell Hardness Twin Tester, digitally computes standardRockwell and Superficial Rockwell Hardness scales in one versatile unit. The easyto use interface converts hardness scales with a push of a button. Complete microcomputer controlled operation drives this hardness tester to highly sensitive andaccurate readings. The 900-370 will offer unmatched repeatability in all stan-dard and superficial Rockwell hardness scales. A top of the line performer suitedfor almost any environment including heat treat facilities, tool rooms, work-shops, laboratories and inspection labs. Lifetime technical support is included onall Phase II hardness testers. The 900-370 is truly a “world class” hardness testerproviding level of confidence and accuracy you will only find at Phase II

Comes Complete With Everything You Need To Perform Tests In The Following Rockwell Scales; A, B, C, D, F, G, N & T

E, H, AND K Scales Can Be Achieved With Optional Indentors

Features:•Fully automated testing procedures

affords highly sensitive andaccurate readings

• Micro computer controlled withoutput to built-in mini printer or PC.

• Offers programmable scaleconversions, dwell times, statisticalcapabilities and test counter

Major Load 60 Kgf, 100 Kgf, 150 KGF

Test Force Application Dead Weight


Results Display Digital Readout

Vertical Capacity 6.7 in.

Throat Depth 6.6 in.

Height 28 in.

Width 8.9 in.

Depth 19.6 in.


Accessories:•C-scale Diamond Indenter•1/16” Ball Indenter•Built-in Mini Printer• Calibrated Test Blocks•Test Table 5.87” (150mm)•Flat Anvil 2.5” (63mm)•Spot Anvil .38” (10mm)•Std. Vee Anvil•Accessory Case•Dust Cover

900-360 $5,995The Phase II Digital Rockwell Hardness Tester adopts a micro computer controllerto fully automate testing procedures and achieve a level of dynamic precisionthat can onlt be found at Phase II. This “state of the art” Hardness Tester offersprogrammable scale conversions, dwell times, statistical capabilities, thishardness tester presents unmatched repeatability in all standard RockwellHardness scales. The 900-360 is easy to operate yet engineered to obtain highlysensitive and extremely accurate readings. A perfect performer suited for almostany environment including heat treat facilities, tool rooms, workshops,laboratories and inspection labs. Lifetime technical support is included with allPhase II Hardness Testers. So test away with confidence and a level of accuracyyou can only find at Phase II.

Comes Complete With Everything You Need To Perform Tests In The Following Rockwell Scales; A, B, C, D, F, G

E, H, and K Scales Can Be Achieved With Optional Indentors!

Model No. Description Price900330-9440 120° Diamond Indentor $115.00

900330-9441 1/16” Carbide Steel Indentor $32.99

900330-12 1/2” Steel Ball Indentor $65.00




900330-9405 Small Round Anvil $39.00

900330-9411 Large Round Anvil $49.00

900330-9412 V-Anvil $45.00

900331-9406 Spot Anvil µ” Dia. $75.00


900330-9413 A-Scale Test Block $19.95

900330-9414 B-Scale Test Block $19.95

900330-9415 C-Scale (Low Range) Test Block $19.95

900330-9415CC-Scale (Low Range) Test Block NISTCertified

Call

900330-9416 C-Scale (Mid Range) Test Block $19.95

900330-9416CC-Scale (Mid Range) Test Block NISTCertified

Call

900330-9417 C-Scale (Hi Range) Test Block $19.95

900330-9417CC-Scale (Hi Range) Test Block NIST Certified

Call

900340-9001 HR15N Superficial Test Block $29.95



900340-9004 HR45T Superficial Test Block $29.95



Other Available Test Blocksa) Full Range of Rockwell Scale Test Blocksb) Full Range of Brinell Test Blocksc) Most Micro Hardness Test Blocks including Vickers,

and Knoop.

Test Loads62.5, 100, 125, 187.5,250, 500, 750, 1000,1500, 3000 kgf

Test Force Application Load Cell


Accuracy Conforms to ASTM-E10

Results Display Digital LCD

Vertical Capacity 9.44” / 240mm

Throat Depth 5.11” / 130mm

Height 30.51” / 775mm

Width 21.65” / 550mm

Depth 9.44” / 240mm


Hardness Tester includes:• Large testing anvil• Small testing anvil• V testing anvil• Standard Brinell test block• Reading Microscope (20x)• Steel ball indenters (2.5mm , 5mm, 10mm)

900-352 $5,900The 900-352 utilizes a Load cell for measuring the test forces, which provides ahighly efficient and low cost means of Brinell Hardness testing. Easy operationcombined with high accuracy makes the 900-352 the perfect choice for produc-tion environments or testing labs.

These testers are crafted and engineered to performat the highest level of accuracy. An ergonomic and attractive design combined withlightweight assists in taking precise hardnessmeasurements.

Test Blocks Not Included. See selection below:

PHT-950 Digital Shore A Durometer $395PHT-975 Digital Shore D Durometer $395PHT900-01 Shore A Test Block Low (30’s) $ 59.95PHT900-02 Shore A Test Block High (90’s) $59.95PHT900-05 Shore A Test Block Mid (60’s) $59.95PHT900-25 Shore A Master Set(7pcs in case) $299.95PHT975-05 Shore D Test Block Low (20’s) $59.95PHT975-10 Shore D Test Block High (80’s) $59.95PHT975-25 Shore D Master Set(3pcs in case) $209.95

PHT-995 $350The Phase II Coating Hardness Tester is engineered to determine the resistanceof coatings to scratch effects on the surface. Utilizing the Wolff/Wilborn princi-ple, this coating hardness tester conforms to ASTM D 3363-05.

Pencils of various known hardness are dragged over the coating surface at afixed angle and fixed pressure. Beginning with the hardest lead, graduatingsofter, movements of .250” (6.5mm) will determine where the surface areais/is not being gouged or scratched.

Pencils can be changed easily via a knurled thumb screw on the side of theinstrument.

A set of 14 calibrated wood drawing pencils is included from 6B to 6H.

PHT-950 Shore “A” PHT-975 Shore “D”

Measurement Range 0-100HSA 0-100 HSD

Deviation <1%H <1%H

Resolution 0.1H 0.1H

Digital Readout Yes Yes

Repeatability 20-90 HSA <+/-1 H 20-90 HSD <+/-1 H

Conforms to StandardsASTM D-2240ISO 7619DIN 53505

ASTM D-2240ISO 7619DIN 53505

Peak Value Lock in Yes Yes

StatisticsMean, Min, Max, No. ofMeasurements andDeviation

Mean, Min, Max, No. ofMeasurements andDeviation

RS232 Output Yes Yes

Power Supply 4 x AAA 4 x AAA

Low Battery Indicator Yes Yes

SRG-1000 $1,195The PHASE II SRG-1000 surface roughness tester is a pocket-sized economicallypriced instrument for measuring surface texture conforming to traceable standards.It can be used on the shop floor in any position, horizontal, vertical or anywhere inbetween.

The large LCD display shows either roughness parameter Ra or Rz at the touch of abutton, combined with the selected cutoff length. External calibration of theroughness values is possible by means of a special CAL button, which makesadjustment of this instrument very easy. A beep signal informs the user about eachindividual measurement status when ready.

The easy to use SRG-1000 operates on various surfaces, not only flat but also outercylinder, outer cone, grooves, and recesses greater than 80x 30mm. The areas ofapplication are wide spread. It is suitable for inspection departments, qualitycontrol, on the shop floor during machining, during assembly, and on site.

The SRG-1000 determines both roughnessparameters Ra and Rz within a wide measuringrange. The piezo-electric pick-up stylus withdiamond tip assures a very reliable measurementwithin tolerances that conform to ISO Standards &DIN Standards. Roughness parameter Ra iscomputed to conform to ISO Standards and Rz iscomputed to conform to DIN Standards.

Roughness parameter Ra (ISO), Rz (DIN)

Measuring range Ra: 0.05-10.0mm/Rz 0.1-50mm

Resolution 0.04mm (1.6minch)

Cut-off lengths 0.0009in., 0.03in., 0.09in

Filter RC analogue

Tracing length 0.23in (6mm)

Tracing speed 0.04in/second (1.0mm/second)

Accuracy +/- 12% of actual Value

Pick-up stylus Piezo-electric

Tracer tip Diamond, radius 10mm +- 2.5mm

Operating temperature 32-104 degrees F (0-40 degrees C)

Power 3.6v / 2xNiMh batteries

Charger 9V DC

Contact force on probe <1.8ozf (<50gf)Static measuring force of sensor stylus <0.06ozf (<1.6gf)

Dimensions 4.9 x 2.8 x 1.0in (125 x 73 x 26mm)

Weight 0.4lbs (200g)

SRG-4000 $1,495The New!! Phase II SRG-4000 is the latest in “State-of-the-art” surface roughness testing. This model is distinguished by a highlevel of accuracy, most popular settings and simplicity of operation.Extremely sensitive and highly accurate readings are offered viamultiple parameters in Ra, Rq(Rms), Rt and Rz.

Able to handle round parts, bores, flats, I.D’s and O’D’s and alltypes of special applications, the Phase II SRG-4000 utilizes aneasy interface to allow for changes of in/mm(µin/µm), cutofflengths, sampling lengths, level of test (stylus position), digitalfilters and more! Measurement results are displayed as largecharacters on the LCD screen for easy recognition.

Battery powered portability allows the SRG-4000 to mobilize productivity throughout the shop.

Optional Accessories:SRG4000-050 Precision Support StandSRG4000-110 Stylus ExtensionSRG4000-700 Calibrated Reference Standard

Features:• Menu driven operating system• 4 Different roughness parameters• Inside/Outside Diameters• Stylus position indicator• RS 232 output to printer/PC• Extended memory functions

Roughness parameter Ra, Rz, Rq(RMS), Rt

Assessed Profiles Primary profile(p), Roughness profile(R) tp curve (Mr)

Conformance Standards ISO/DIN/JIS/ANSI

Measuring System Metric µm, Imperial µinch

Display Resolution+/-20 µm = 0.001 µm+/-40 µm = 0.002 µm+/-80 µm = 0.004 µm

Display RangeRa, Rq: 0.005 µm up to 16 µmRz, Rt: 0.02 µm up to 160 µm

Pick Up Measuring Range +/- 80 µm

Sensor Specifications 5 µm Diamond Tip Stylus

Sensor Angle 90°

Contact Force 4mN (0.4gf)

Display features

SStylus position sensorBattery level indicatorDirect display of parametersDirect printingAuto-off with auto store

Data output RS 232 to printer/PC

Cut-off lengths 0.25mm/0.8mm/2.5mm

Tracing length Lt 1.3mm – 17.5mm

Digital Filter RC, PC-RC, GUASSIAN, D-P

Traverse Length Selectable 1,3 or 5

Power Li-Ion battery

Working temperature 5-40 degrees C.

Dimensions 139mm x 56mm x 48mm

Weight 450g

SRG-5000 CallDurable• Lasercheck heads are vitually indesctructable

• Eliminates high maintenance and calibration costs

Fast and On-Line Capable• Single measurements in a fraction of a second

• measure moving surfaces with high precision

• Multiple input trigger and output monitor options

Reliable• Superior repeatability for dependable results

• Runs for years without performance degradation

The Perfect Manufacturing Floor SolutionLasercheck is specifically designed for portable or on-line use in produc-tion and manufacturing environments. Patented “light scatter” detectiontechnology provides superior durability, measurement speed, and repeata-bility to any competing surface finish technology.

Monitor the ProcessOperators on the production floor can use Lasercheck to easily and quickly checkproducts ensuring the process and quality is in control. Lasercheck providesimmediate testing of surfaces without concern for damage to fragile measurement equipment or surfaces.

Save maintenance Time and CostLasercheck allows more practical use of fragile stylus & optical profilers. These analytical devices can be be better protected in labs performing QC audit &process development measurements while Lasercheck performs high volumemanufacturing QC work. Using technology where it is best suited provides maximum benefit.

Principal Operation• Detectors inside measurement head measures distribution of specular &

scattered laster light reflected to the surface

• Increased roughness creates less specular & more scattered laser light reflection to be measured

• Electronics and software in controller digitize signals from detectors and calculate Ra (Average) surface roughness

Micro 8826 Head Micro 6212 Head Standard 5872 Head

Dimensions .990” X .75” X 2.05” 3.00” X 1.40” x 1.75” 12.00” X 5.5” X 5.25”

Measurement range(RA Rouchness)

1.00 µinchto 80 µinch0.025 µm to 2.0 µm

.50 µinchto 80 µinch0.0125 µm to 2.0 µm

0.25 µinchto 40 µinch0.00625 µm to 1.0 µm

Shapes Measured Flats, Cylinders > 0.75” Flats, Cylinders, Wires, Bores > 2.00” Flats, Cylinders > 0.50”

Surfaces Measured

Processes Measured

Repeatability + 3.0% of measured value + 3.0% of measured value + 3.0% of measured value

Measurement Size 5 mm X 1 MM 5 mm X 1 MM 5 mm X 1 MM

Works on any material (rubbers, glass, metals ceramics etc.); customization for low reflectivity

Ground, Sanded Polished, Honed, Super-Finished, Fine-Tuned, Shot Blast

Automated “A” Controller Portable “B” Controller Portable “B” Controller

Dimensions 8.00” X 9.00” X 4.00” 4.20” X 1.75” X 7.60” 3.35” X 2.90”

Measurement speed 10 measurements per second Single measurement < 1 second 10 measurements per second

InputsPushbuttonSerial Port (Lasercheck SW)External Trigger Port

Pushbutton Serial Port (User SW)

Outputs

LCD DisplaySerial Port (Lasercheck SW)Failed Part Trigger OutAnalog (0-10V/4-20 mA)

LDC DisplaySeial Port (with optional cable and Lasercheck SW)

Serial Port (User SW)

Storage

All RA Value (no limit)Min, Max, Std Dev, Time/DateGraphical Plot & DisplayASCII Formatted File

Up to 10,000 Ra ValuesTime/DateASCII Formatted Files

n/a—no storage on board

Controllers—Specifications

Measurement Heads—Specifications

UTG-2000 Ultrasonic Thickness Gauge- Basic Touch/Read $795UTG-2020 Ultrasonic Thickness Gauge- w/Memory, Output & Printer $1295State of the art, digital testers are menu driven, multi-functional units offering everything from the basic measurement to extendedmemory and RS 232 output capabilities. This dynamic series of gages are designed to measure the thickness of metallic and non-metallicmaterials such as aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has paralleltop and bottom surfaces. The UTG-2000 series gages will accurately display readings in either inch or millimeter after a simplecalibration to a known thickness or sound velocity.

Model No. UTG-2000 UTG-2020Display type 4-digit LCD 4-digit LCDMinimum display unit 0.001”/0.01mm 0.001”/0.01mmMeasuring Range 0.04-8.0” in steel w/standard probe 0.04-8.0” in steel w/standard probeDisplay accuracy 0.001” / 0.01mm 0.001” / 0.01mmSound velocity range 3280-32805 ft/s (1000-9999m/s) 3280-32805 ft/s (1000-9999m/s)Operating temperature 32-122 degrees F 32-122 degrees FFrequency 5MHz 5MHzUpdate range 4Hz 4HzMemory N/A Up to 4000 ValuesOutput N/A RS232 via supplied cablePrinting N/A via Supplied Mini-Printer w/Cables & AdapterPower supply 1.5v AAA alkaline batteries (2pc) 1.5v AAA alkaline batteries (2pc)Battery life Approx. 250 hours/set Approx. 250 hours/setPower consumption Working current is less than 3V Working current is less than 3VDimensions 4-1/4 x 2-3/8 x 1” 4-1/4 x 2-3/8 x 1”Weight 4.7oz 4.7oz

Both versions come complete with Certificate of Calibration, Operation Manual and Custom Carry Case.

Model No. UTG-2000: standard unit has measuring capabilities only Model No. UTG-2020: standard unit incorporates vast

memory functions, mini-printer, PCcable, charger, operations manual

UTG-1500 $595This handheld unit has precise touch and read capabilities yetis economically priced. The UTG-1500 is designed to measurethe thickness of metallic and non-metallic materials such asaluminum, titanium, plastics, ceramics, glass and any othergood ultrasonic wave conductor as long as it has parallel topand bottom surfaces. The UTG-1500 will accurately displayreadings in either inch or millimeter after a simplecalibration to a known thickness or sound velocity.

Comes complete with Certificate of Calibration, Couplant Gel, AA Batteries, Operation Manual and Custom Carry Case.

Display type 3-digit LCDResolution 0.001”/0.01mmMeasuring Range 0.04” to 8.0”Sound velocity range 3280-32805 ft/s (1000-9999m/s)Operating temperature 32-122 degrees FFrequency 5MHzUpdate range 4HzMemory N/AOutput N/APrinting N/APower supply AA alkaline batteries (4pc supplied)Battery life Approx. 250 hours/setPower consumption Working current is less than 3VDimensions 4.9” x 2.6” x 0.9” (161 x 69 x 32mm)Weight 0.7lbs (300g)

Model No. UTG-2020: standard unit incorporates vastmemory functions, mini-printer, PCcable, charger, operations manual

Model No. DescriptionRange PriceUTG-0500 5-Step Block $87UTG-0100 NIST Traceable Certificate $75

Stock No. Description Comments PriceUTG2000-020 2” Inside Diameter Probe Fits UTG-2000/2020 $179.00UTG2000-030 3” Inside Diameter Probe Fits UTG-2000/2020 $179.00UTG2000-040 4” Inside Diameter Probe Fits UTG-2000/2020 $179.00UTG2000-420 .250” Dia. 90 degree Probe Fits UTG1000/2000/2020 $179.00UTG2000-440 ZT-12 High Temp Probe Fits UTG-2000/2020 $190.00UTG2000-450 Rough Surface Probe Fits UTG-2000/2020 $259.00UTG2000-400 Std. Dual Sensor Probe Fits UTG1000/1500/2000/2020 $149.00

Model No. Description PriceUTG1000-800 4oz. Bottle of Couplant Gel $10UTG1000-850 Gallon-Couplant Gel $75

Main Technical Data:• Measuring range: 0-2000 mm max. or 0-80 mils• Resolution: 0.1mm/0.01mils(0-99m m)

or 1m m (over 100mm)• Guaranteed tolerance: After one-point calibration:

+/- 1-3%n or 2mm (whichever is greater)• Display: 4 digits (digit height = 10mm/0.4”)• Min. measuring area: 0.2” x 0.2” (5mm x 5mm) • Min. radius of curvature: Convex: 0.12” (3mm)

Concave: 1.2” (30mm)• Min. substrate thickness: Ferrous: 20 mils (0.5mm)

Non-ferrous: 2 mils (50 mm)• Calibration: Zero Calibration/Foil calibration

* Max. Surface temperature of test object: 302 degrees F (contact time max is 2 seconds)

• Power source: 4-AAA batteries• Dimensions: 161 x 69 x 32mm• Weight: 9oz. (260g)

PTG-3500 Integrated Coating Thickness Gage $495PTG-3550 Coating Thickness Gage w./External Probe $495The PHASE II PTG-3500 series of gages can perform two different methods of calculating thickness measurement by utilizing the characteristics ofboth eddy current and magnetic induction. Testing performance is both non-destructive and extremely accurate. With these state of the art thicknessgages, you can easily detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous) or an insulating coating on a non-magneticconductive substrate (non-ferrous) utilizing either an integrated probe or our version that comes with an external probe.The PHASE II PTG-3500 andPTG-3550 can be used in many areas of industry including manufacturing, general engineering, commercial inspection, etc.The PTG-3500 utilizes an integrated probe that can automatically detect a Ferrous or Non-Ferrous substrate and comes with 2 substratesamples(steel,aluminum), 4 calibrated thickness samples, carry case, batteries and operation manual.The PTG-3550 comes complete with 1pc external auto-detect Ferrous/Non-Ferrous probe, 2 substrate samples(steel, aluminum), 4 calibratedthickness specimens, carry case, batteries and operation manual.

Features:• Heavy-Duty Construction• Extreme Accuracy to +/- 0.5%• Designed for tension/compression measurements• Min/Max Setting with Go/No Go Light Feature• Peak value controls• Auto weight conversion• Versatile range of gages are supplied in complete test kit

form containing full set of accessories and carry case.• Can be hand-held or mounted to optional test stand

Features:•Heavy-Duty Construction• Direct Dial Readings in lbs/kg• Extreme Accuracy to +/- 1%• Designed for tension/compression measurements• Versatile range of gages are supplied in complete test kit

form containing full set of accessories and carry case.•Can be hand-held or mounted to optional test stand

Optional Test Stand on Page 27

Optional Test Stand on Page 27

Model No. Capacity Resolution Price

DFG-01002 N7.19 oz203.94 g

0.001N0.001oz0.0001kg

$495.00

DFG-02005 N17.99 oz509.85 g

0.001N0.001oz0.0001kg

$495.00

DFG-030010 N2.25 lb1 oz

0.005N0.0005 lb0.005 oz

$495.00

DFG-040050 N11.24 lb5.10 kg

0.01N0.001 lb0.001 kg

$495.00

DFG-0500100 N22.48 lb10.19 kg

0.05N0.005 lb0.005 kg

$495.00

DFG-0600500 N112.40 lb50.99 kg

0.1N0.01 lb0.01 kg

$495.00

DFG-07001000 N224.80 lb101.97 kg

0.5N0.05 lb0.005 kg

$749.00

Model No. Capacity Resolution Price

AFG-0100 2 lb / 0.90kg 0.01 $199

AFG-0200 5 lb / 2.26kg 0.025 $199

AFG-0300 10 lb / 4.53kg 0.05 $199

AFG-0400 20 lb / 9.07kg 0.1 $199

AFG-0500 50 lb / 22.67kg 0.25 $199

AFG-0600 100 lb / 45.36kg 0.5 $199

Features:• Universal design enables user the ability to test multiple

physical properties such as insertion, withdrawal, tension,compression and fracture type tests.

Dimensions:Length: 9.25” (235mm)Width: 5.98” (152mm)Height: 15.75” (400mm)Weight: 22 lbs

AFG-1000 $195

Optional 90° AdapterPart No. RGB1000-090

Features:• Portable, rugged design enables user to view critical

components in high resolution through access holes as smallas .160” (4mm).

• Utilizes a high intensity tungsten halogen light sourceoperated by 2 AA batteries.

• Built-in light source affords user extreme versatilityanywhere in the shop.

• Supplied with Custom Fitted Carry Case.

Model No. Description PriceRGB-1000 7” Rigid Borescope Kit $399RGB1000-090 90° adapter for 1000 $99RGB-1700 17” Rigid Borescope Kit $495RGB1000-090 90° adapter for 1700 $99

Dimensions RGB-1000 RGB-1000Working Length 7” 17”

Overall Length 9” 19”

Diameter of tube .160” (4mm) .160” (4mm)

Field of View 65° Wide Angle 65° Wide Angle

Features:• Quick accurate analysis for checking balance and alignment of a rotating object.• Large LCD display• RS232 Output• Statistics: Mean, Max, MIN, No. of Measurements and Std deviation• Inch/Metric Conversion with the push of a button• Max Hold Function• Regulated Output(AC output 2.0v peak full scale

DVM Includes:• 1-Powerful Magnet • 1-Accelerometer• 1-Stinger Probe (cone)• 1-Stinger Probe (Ball)• Operation Manual• Carry Case

Multi-functional meter is capable of measuring Velocity, Acceleration, Displacement and RPM Frequency.

Model No. Description PriceDVM-1000 Digital Vibration Tester $595

AccelerationPeak Value: 0.1 – 200 m/sor 0.3-656 ft/m/s

Frequency Range: 10Hz-1KHzFrequency Range: 10Hz-10KHz

Velocity(RMS)RMS: 0.1-400 (mm/s)or 0.004 -16.0 inch/s

Frequency Range: 10Hz-1KHz

DisplacementPeak to Peak: 0.001 – 2.0(mm)or 0.04-80mil

Frequency Range: 10Hz-500Hz

RPM (revolution) 5-100,000 r/minFrequency 0.1 – 10KHzAccuracy <5%Operating Temp 0-45°CPower 4-AAA BatteriesDimensions 161 x 69 x 32mmWeight 300g

SpecificationsImage Sensor: 1.3 Mega pixels Video Capture Resolution: 1280x960, 800x600,640x480, 352x288, 320x240, 160x120 Still Image Capture Resolution: 1280x960 Color: 24bit RGB Lens: Dual Axis 27X & 100X Microscope Lens Focus Range: Manual Focus From 10mm to infinite Frequency: 50Hz/60Hz Frame rate Max: 30f/s under 600 Lux Brightness Magnification Ratio: 20X to 200X Shutter Speed: 1 sec to 1/1000 sec. Video format: AVI format White Balance: Auto. Exposure: Auto Light Source: 4 LED White Light PC Interface: Mini USB 2.0 Operation system: Windows 98SE/ME/2000/XP OSD Language: English Power supply: 5V DC from USB PortSize: 110mm(L)X33mm(R) Weight: 120g

Applications include: Industrial Inspection Computer Parts inspection Telecom module inspection Scientific teaching tool Laboratory ResearchMedical analysis School Research tool Insect dissection/examination

Plant dissection/examination Skin examination Scalp examination Textile Inspection Jewelry Inspection Collections/Coin Inspection Printing Inspection Reading Aid And more!

Included Accessories: • A1-Alloy Stand • Safety Cover • User Guide • CD ROM (Driver)

DPS-1000 $199The Palmscope is a “World-Class” portable digital video microscope that fits in the palm ofyour hand or mounts to a sturdy precision stand. Engineered with a VARIABLE Dual Axis 27X-100X zoom objective, this digital video microscope plugs into your laptop or computer via aUSB port. Extremely versatile, the Palmscope CMOS USB camera allows you to easily view and capturevideo and freeze still images, all in real time, precision color, right on your monitor.The image quality is unmatched for a portable USB video microscope in this class. And theimage quality tells the complete story. High precision LED’s enable our “World-Class” opticsto exhibit true clarity with brilliant color!!

Documents

Brochure Metrology Line