Brochure for mail2.imimg.com/data2/JQ/LI/MY-3430903/s-s-and... · 3 Straight running chains - Double hinge † Ferritic, AISI 430 stainless steel slats, work hardened, with shiny

2011

Materials

The Magris chains are produced with high quality steel/stainless steel in order to satisfy the growing

needs of technological progress on the conveying lines.

Hard Inox

Special work hardened, chrome-nickel, highly wear corrosion resistant stainless steel. It offers

excellent mechanical characteristics and exceptional sliding properties, thanks to a very low surface

roughness.

It is particularly suitable for the critical points of bottling lines.

Material used for the following chain models: Super, Flex RXMS, Flex FMS, Flex FMS2, New Flex Mag.

Super-G, Flex RXMS-G and New Flex Mag-G.

Hard Inox

SLATS

Inox

Ferritic, AISI 430 stainless steel, work hardened by cold-rolling, with good corrosion resistance. It has

an excellent surface finishing with a low roughness, that is a very important quality for the sliding of

conveyed products. It is the preferred choice for standard bottling industry applications.

Material used for the following chain models: Special, Standard and Flex RXMC.

Inox

PINS

- Pins are made of AISI 431 stainless steel, magnetic and work hardened for high resistance, in the

following chain models: Special, Standard, Super, Super-G, Flex RXMC, Flex RXMS, Flex RXMS-G, Flex

FMS, Flex FMS2 and New Flex Mag.

- Pins are made of austenitic stainless steel (18% Chrome - 8% Nickel), work hardened for high

resistance in the following chain models: Stella D., Flex RXM, Flex FM and Flex Fm2.

- Pins are made of case-hardened carbon steel in the following chain models: Accate, Accate-C, Flex

RXMA and Flex RXMA-C.

N.B.: Upon request, all our chains can be produced with other types of stainless steel.

PINS

Materials

Inox

Hard Inox

HQ Inox

Inox 18/8

Inox 316

Carbon Steel

Minimumtemperatures

Maximumtemperatures

Dry env. Wet env.

- 40 Co

- 40 Co

- 40 Co

- 40 Co

- 40 Co

- 40 Co

+ 260 Co

+ 400 Co

+ 430 Co

+ 400 Co

+ 400 Co

+ 180 Co

+ 120 Co

+ 120 Co

+ 120 Co

+ 120 Co

+ 120 Co

+ 120 Co

LOW FRICTION ACETAL RESIN

This material has a low coefficient of friction, high wear resistance and excellent resistance to

chain tension. It is recommended for high load, high speed applications. FDA (Food

and Drug Administration) approved for direct contact with food.

- 40 C / + 80 C (dry environment)

- 40 C / + 65 C (wet environment)

o o

o o

Working temperatures:

LFA colours: WLF colour:light brown, green-blue / white

LFA

WLF

Mate

rials

Contents

Straight running chains - Single hinge

Straight running chains - Double hinge

Sideflexing hinged slat chains

Sideflexing hinged slat chains for magnetic systems

“1864” Straight running Plate Top chains

Standard - Inox Page 2

Flex RXMC - Inox Page 4

Flex RXMS - Hard Inox Page 4

Flex Mag - Inox

New Flex Mag - Hard Inox Page 5

Standard - Inox Page 3

Stella D. - Inox 18/8 Page 3

Page 5

1864 Page 6

Metal Conveyor Chains

Conte

nts

Contents

Thermoplastic straight running chains - Single hinge

Thermoplastic straight running chains - Double hinge

Thermoplastic sideflexing chains

Biplanar thermoplastic chains

Case conveyor chains

820 Series Page 7

880 M Series & 882 Series Page 9

880 TAB Series Page 10

WLF 1700 Series Page 11

WLF 1701 Series Page 11

821 Series Page 8

D 600 Series Page 12

Thermoplastic Conveyor ChainsC

onte

nts

2

Straight running chains - Single hingeS

traig

ht

runnin

g c

hain

s -

Sin

gle

hin

ge

• Ferritic, AISI 430 stainless steel slats, work hardened, with shiny surface having low roughness.

• AISI 431 stainless steel pins, magnetic and work hardened for high resistance.

StandardInox

Chain ref.Magriscode

SS 812 K225

SS 812 K250

SS 812 K275

SS 812 K300

SS 812 K325

SS 812 K400

SS 812 K450

SS 812 K600

SS 812 K750

7.00.015

7.00.021

7.00.200

7.00.031

7.00.041

7.00.070

7.00.080

7.00.100

7.00.110

Model

Standard

Standard

Standard

Standard

Standard

Standard

Standard

Standard

Standard

L=Slat width

mm ’’

57,1

63,5

69,9

76,2

82,5

101,6

114,3

152,4

190,5

Hardness GP RCCWeight

per metre

2 1/4

2 1/2

2 3/4

3

3 1/4

4

4 1/2

6

7 1/2

20

20

20

20

20

20

20

20

20

1,6

1,6

1,6

1,6

1,6

1,6

1,6

1,6

1,6

HRC mm mm Kg/m

150

150

150

150

150

150

150

150

150

2,18

2,25

2,35

2,50

2,65

3,00

3,30

4,20

5,10

Smaller width - 31.8mm (1¼”), 44.5mm (1¾”) and 50mm also available.

The above chains are also available in Super (Hard Inox), Inox 18/8, etc.,

Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres

SS 812 K350 7.00.061 Standard 88,9 3 ½ 20 1,6 150 2,70

SSH 812 K325 S.7.00.041 Super 82,5 3 1/4 30 1,6 150 2,65

3

Straight running chains - Double hinge



StandardInox

Stella D.Inox 18 / 8

• Chrome-nickel, austenitic AISI 304 stainless steel slats (18% Chrome - 8% Nickel), work hardened

for high resistance - shiny - with a roughness of Ra < 0.5 microns.

• Austenitic stainless steel pins (18% Chrome - 8% Nickel), work hardened for high resistance.

Chain ref.Magris

code

SS 802 K750

SSA 805 K750

7.04.110

7.14.110

Model

Standard

Stella D.

L=Slat width

mm ’’

190,5 7 1/2

190,5 7 1/2

Hardness

HRC

20

26

GP

mm

1,6

1,6

mm

RCC

150

150

Weightper metre

Kg / m

5,80

5,80


Str

aig

ht

runnin

g c

hain

s -

Double

hin

ge

Sid

efl

exin

g h

inged s

lat

chain

s

4

Sideflexing hinged slat chains

Flex RXMC / Flex FMCInox


• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), work hardened for

high resistance.


Chain ref.

SSH 881 T K750

SSH 881 T K450

Magris

codeModel L=Slat width

Weightper metre

R=Minimumsideflexing radius

S.8.23.111

S.8.23.081 Flex RXMS Tab

Flex RXMS Tab

114,3

190,5 7 1/2

4 1/2 500

500

3,80

5,50

Standard shipping lengths: 80 pitches = 10 feet = 3,048 metres. Above chains available in Inox 18/8, with adequate quantities.

Flex RXMS / Flex FMSHard Inox

• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with shiny surface

having a roughness of Ra 0.3 microns.

• Chrome-nickel, austenitic stainless steel guide shoes (18% Chrome - 8% Nickel), work hardened for

high resistance.


≤

Type

SS 881 T K325

SS 881 T K450

SSH 881 T K325

8.23.041

8.23.081

S.8.23.041

Flex RXMC Tab

Flex RXMC Tab

Flex RXMS Tab

82,5

114,3

82,5

3 1/4

4 1/2

3 1/4

457

500

457

3,10

3,80

3,10

SSH 8811 T K325

SS 8811 T K450

SS 8811 T K325

SSH 8811 T K450

S.8.26.041

8.26.081

8.26.041

S.8.26.081

Flex FMS Tab

Flex FMC Tab

Flex FMC Tab

Flex FMS Tab

82,5

114,3

82,5

114,3

3 1/4

4 ½

3 1/4

4 1/2

500

500

500

500

3,10

3,80

3,10

3,80

SSH 8811 K325 S.8.26.040 Flex FMS 8 82,5 3 1/4 500 2,90

Bevelled guide shoes

SS 881 K325 8.23.040 Flex RXMC 8 82,5 3 1/4 457 2,90

SSH 8811 K450 S.8.26.080 Flex FMS 8 114,3 4 1/2 500 3,60

SSH 8811 T K750 S.8.26.111 Flex FMS Tab 190,5 7 1/2 500 5,50

Chain

with

hold-

down

Tabs

Chain with

Bevelled

guide shoes

Bevelled Chain

Hold down Tabs

mm ’’ mmTAB Chain Kg / m

Sideflexing guides for above chains are available.

5

Sid

efl

exin

g h

inged s

lat

chain

s f

or

magneti

c s

yste

ms

Sideflexing hinged slat chains for magneticsystems

Flex MagInox


• Special, stainless steel pins, 400 series - magnetic - work hardened for high resistance.

New Flex MagHard Inox

• Special, chrome-nickel, stainless steel slats, work hardened for high resistance, with shiny surface

having a roughness of Ra 0.3 microns.

• Special, stainless steel pins, 400 series - magnetic - work hardened for high resistance.

≤

Chain ref.Magris

codeModel L=Slat width

Weightper metre

R=Minimumsideflexing radius

mm ’’ Kg / mmm

SS 881 M K325

SSH 881 M K325

SSH 881 M K750

SSH 881 M K450

7.08.040

S.7.08.040

S.7.08.080

S.7.08.110

Flex Mag

New Flex Mag

New Flex Mag

New Flex Mag

82,5

82,5

114,3

190,5

3 1/4

3 1/4

4 1/2

7 1/2

500

500

500

500

2,50

2,50

3,20

4,90

* Size produced only upon request. Delivery conditions and terms to be agreed.


Magnetic Corner Tracks for above chains are available.

“1864”

Str

aig

ht

runnin

g P

late

Top c

hain

s

6

“1864” Straight running Plate Top chains

1864This high speed, high capacity series offers better efficiency and reliability in applications where high

temperatures or abrasive materials are involved.

• Steel and stainless steel top plates.

• Base roller chain, 19,05 mm - 3/4” pitch.

Chain ref.Magris

code

Ultimatestrength

Basechain

material

Top platematerial

L=Slatwidth

Weightper metre

mm Kg / m

1864 K325

1864 K450

1864 A K325

1864 K600

1864 K750

1864 A K450

1864 A K600

1864 A K750

1864 SS K325

1864 SS K450

1864 SS K600

1864 SS K750

1864.CC.041

1864.CC.081

1864.CC.101

1864.CC.111

1864.CS.041

1864.CS.081

1864.CS.101

1864.CS.111

1864.SS.041

1864.SS.081

1864.SS.101

1864.SS.111

37000

N

37000

26000

Carbon

Steel

Carbon

Steel

Carbon

Steel

Stainless

Steel

Stainless

Steel

Stainless

Steel

82,5

114,3

152,4

190,5

3,33

4,00

5,33

5,68

82,5

114,3

152,4

190,5

3,33

4,00

5,33

5,68

82,5

114,3

152,4

190,5

3,33

4,00

5,33

5,68


Therm

opla

sti

c s

traig

ht

runnin

g c

hain

s -

Sin

gle

hin

ge

7

Thermoplastic straight running chains- Single hinge

820 Series

820 LFA

- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.

- These chain can be supplied either with pins in austenitic stainless steel, work hardened, highly wear resistant, or with pins in

thermoplastic resin.

Chain Ref.

LFA 820 - K 250 6.10.020

6.10.040

6.10.042

6.10.043

6.10.060

6.10.070

6.10.080

6.10.100

6.10.110

LFA 820 - K 325

LFA 820 - K 330

LFA 820 - K 343

LFA 820 - K 350

LFA 820 - K 400

LFA 820 - K 450

LFA 820 - K 600

LFA 820 - K 750

Magris code Material Width L Thickness S

mm.

63,5

82,5

83,8

87,0

88,9 4 9,5

0,73

0,83

0,83

0,85

0,87

0,95

1,03

1,25

1,47

101,6

114,3

152,4

190,5

LFA Acetal resin

(Light brown)

mm. mm. Kg/m

Height h Weight

Low Friction Acetal Resin

• Plates in self-lubricating low friction acetal resin, light brown-coloured.

• Pins in special chrome-nickel stainless steel, work hardened for high resistance.

TRAVEL

L44,5

42, 1

h

S

38,1

13,5Rd min. =40

7,2

6,35

8

Thermoplastic straight running chains- Double hinge

821 Series

821 LFA





- These chains can be supplied with pins in austenitic stainless steel, work hardened, highly wear resistant.

Chain Ref.

LFA 821 - K 750 6.14.110

6.14.120

6.14.130

LFA 821 - K 1000

LFA 821 - K 1200

Magris code Material Width L Weight

mm. Kg/m

Therm

opla

sti

c s

traig

ht

runnin

g c

hain

s -

Double

hin

ge

LFA Acetal resin

(Light brown)

190,5

254,0

304,8 3,25

2,95

2,50

TRAVEL

L

Rd min. =40

14,3

7,94

6,35 38,1

h

136,5 140

4,8

9

Thermoplastic sideflexing chains on magnetic

tracks

880 M Series

880 M LFA



• Pins in special stainless steel, 400 series, work hardened, magnetic, highly wear resistant.


Therm

opla

sti

c s

idefl

exin

g c

hain

s o

n m

agneti

c t

racks

Chain Ref.

LFA 880 M - K 325

LFA 880 M - K 330

LFA 880 M - K 450

6.18.040

6.18.042

6.18.080

Magris code Material Width L Thickness S Min.Radius R GC Straight GC Sidefl. Weight

mm.

82,5

83,8 4 457 44 44

1,03

1,03

1,16114,3

LFA Acetal resin

(Light brown)

mm. mm. mm. mm. Kg/m

TRAVEL

L

R

11

GC

S

42,1

Rd min. =50

15 7,5

38,1

7,14

882 Series

Low Friction Acetal Resin• Plates in self-lubricating low friction acetal resin, light brown-coloured.• Pins in special chrome-nickel stainless steel, work hardened for high resistance.

882 LFA

- Standard shipping lengths = 80 pitches = 10 feet = 3,048 metres.- These chains can be supplied either with pins in austenitic stainless steel, work hardened, highly wear resistant, or with pins in


LFA 882 - K 450

LFA 882 - K 750

LFA 882 - K 1000

LFA 882 - K 1200

6.15.080

6.15.110

6.15.120

6.15.130

LFA Acetal resin

(Light brown)

114,3

190,5

254,0

304,8

1,94

2,38

2,83

2,75

Chain Ref. Magris code Material Width L

mm.

610

Min.Radius R

mm.

61,9

GC Straight

mm.

58

GC Sidefl.

mm.

Weight

Kg/m

TRAVEL

L

R

GC

4,8

61,1

17,5

Rd min. =40

22,3 9,5

38,1

8,73

Thermoplastic sideflexing chains

10

880 TAB Series

880 TAB LFA





- These chains can be supplied either with pins in austenitic stainless steel, work hardened, highly wear resistant, or with pins in


Therm

opla

sti

c s

idefl

exin

g c

hain

s

Chain Ref.

LFA 880 TAB - K 250

LFA 880 TAB - K 325

LFA 880 TAB - K 343

LFA 880 TAB - K 350

LFA 880 TAB - K 450

LFA 880 TAB - K 600

LFA 880 TAB - K 750

6.12.021

6.12.041

6.12.043

6.12.061

6.12.081

6.12.101

6.12.111

Magris code Material Width L Thickness S G Height h Min.Radius R GC Straight GC Sidefl. Weight

mm.

LFA Acetal resin

63,5 400 0,80

0,94

0,99

1,01

1,08

1,28

1,48

82,5 400

400

400

400

400

400

87,0

88,9 4 11,5 16 46 44,2

114,3

152,4

190,5

(Light brown)

mm. mm. mm. mm. mm. mm. Kg/m

TRAVEL

L

Rd min. =40

20

7,14

38,1

7,55

h

GC

S

42,9

61,1

GR

11

Biplanar thermoplastic chains

WLF 1700 Series

WLF 1700


• Plates in self-lubricating low friction acetal resin, white-coloured.



WLF 1701 Series

WLF 1701


• Plates in self-lubricating low friction acetal resin, white-coloured.



Bip

lanar

therm

opla

sti

c c

hain

s

Chain Ref.

WLF 1700 1700.WA

Magris code Material Min. Radius R GC Straight GC Curve Weight

Link

WLF Acetal resin (White)

Pin mm.

140 58

mm. mm. Kg/m

1,26-Stainless Steel

Chain Ref.

WLF 1701 1701.WA

Magris code Material Min. Radius R GC Straight GC Curve Weight

Link

WLF Acetal resin (White)

Pin mm.

150 62

mm. mm. Kg/m

1,560,3Stainless Steel

TRAVEL

Rd min. = 50

R

5524

12GC

8 50

3

TRAVEL

R

52,4 GC58,4

8

50

25

39

8

12

Case conveyor chains

D 600 Series

D 600 - D 600 TAB

Acetal Resin

• Plates in self-lubricating acetal resin, white-coloured.


- Standard shipping lengths 96 pitches = 20 feet = 6,096 metres.

Case c

onveyor

chain

s

Chain Ref. Magris code Material Pitch P

mm. mm.

D 600

D 600 TAB

600.D

600.TAB.D

Acetal

Acetal

63,5

63,5

43 11

11

14,3

14,3

29 - - 1,44

1,4915542943

mm. mm. mm. mm. mm. Kg/m

Width L Pin Diameter E Max Sprocket Face B Depth of sidebar H Width Over Lug J Height of Lug G Weight

TRAVEL

R= 600 mm

H

L

E P

BJ

G

TRAVELR= 600 mm

H

L

E P

B

Other Products

Straight running chains with rubber

inserts for inclined conveyors

Sideflexing Plate Top chains

Machined sprockets

Sideflexing chains with thermoplastic

Top Plates

Straight running chains with thermoplastic

Top Plates

In accordance with the quality policy of Meritt Transmissions to constantly improve its products,

specifications in this catalogue are subject to change without prior notice.

Please write to us for detailed product catalogue.

Oth

er

Pro

ducts

While all reasonable care has been taken in preparing this catalogue, no responsibility is accepted for printing errors.

Sole Distributor :

E-mail: [email protected] • [email protected]

Web Site - merittransmissions.com

T.R.A.N.S.M.I.S.S.I.O.N.S

www.magris.com

In accordance with the quality policy of Meritt Transmissions to constantly improve its products, specifications in this catalogue are subject to change without prior notice.

Documents

Brochure for mail2.imimg.com/data2/JQ/LI/MY-3430903/s-s-and... · 3 Straight running chains - Double hinge † Ferritic, AISI 430 stainless steel slats, work hardened, with shiny