Broch NP15 Eng

Embed Size (px)

Citation preview

  • 8/10/2019 Broch NP15 Eng

    1/2

    Subjecttoalterationwithoutpriornotice,

    BrochureNo

    .2965-01-14-ESBL/Mcon-English,

    2014Metso,

    PrintedinFrance

    Metso's Mining and Construction, Lokomonkatu 3, P.O.Box 306, FI-33101 Tampere, Finland, tel. +358 20 484 142, fax +358 20 484 143www.metso.com

    Metso, Lokotrack, Nordberg, Barmac and, Trellexare trademarksor registeredtrademarksof Metso Corporation or itssubsidiariesor affiliates.

    Metsos Mining and Constructioncrushing and screening equipment

    Product families:

    Unit crushers

    C series jaw crushers

    Primary gyratory crushers

    GP series cone crushers

    HP series cone crushers

    MP series cone crushers

    NP series horizontal impact crushers

    Barmac series vertical impact crushersUnit screens

    DF series screens

    CVB series screens

    ES series screens

    TS series screens

    MF series screens

    RF series screens

    Unit feeders

    TK series feeders

    VF series feeders

    LH.G series feeders

    VG series feeders

    PF series feeders

    HRBM series feeders

    Mobile crushing and screening plants

    Lokotrack LT series track-mounted crushing plants

    Lokotrack ST series track-mounted screening plants

    Lokotrack CT and CW series track- and wheel-mounted conveyors

    NW series wheel-mounted crushing plants

    Stationary crushing plants

    Complete plants for aggregate production

    Complete plants for recycling applications

    3 stepsforward

    Impact crushers

    Nordberg NP15

  • 8/10/2019 Broch NP15 Eng

    2/2

    2

    Performance in operation

    NP15 offers a steeper feed angle to increase

    material penetration and make the discharge

    curve less sensitive to blow bar wear and

    therefore more consistent over time. This

    new design follows the industry standard for

    HSIs in secondary and tertiary applications.

    The 355kW (450HP) motor on a single

    drive increases the maximum capacity of the

    NP15 by12% compare to the NP1315.

    Cost effectiveness and high Metso

    quality

    The IC2000 automation system ensures high

    NP availability at the touch of a button for

    better plant profitability. The system gives

    better control of the crusher and a com-

    plete view of parameters for more accurate

    crusher monitoring. Among other f unctions,

    the automatic setting calibration gives

    accurate control of the discharge curve, even

    with abrasive materials.

    The wide choice of 7 different blow bars

    (manganese, martensitic steel or chromium

    Iron for the blow bar material selection and

    in combination with ceramic inserts) gives

    The new Nordberg NP15 is the result of more than 60

    years experience in serving the mining and construction

    industries with impact crushers.

    Nordberg NP153 steps forward

    NP15 is designedto give you theright solution toyour needs.

    the insurance to have the right tool

    whatever the application and the

    abrasiveness of the crushed material.

    Easy and safe maintenance

    Metso innovates on NP15 with the new two

    part rear frame. The extra large opening of

    the new frame gives greater access to the

    breaker plates during wear part replacement.

    Metso developed a new breaker plate

    cassette design. This patented innovation

    consists of a removable assembly that allows

    changing the breaker plate liners in a safe

    condition, out of the crusher.

    The new maintenance bridge gives safe

    access to the rotor while changing blow

    bars, and also safe access to the highest side

    liners.

    The patented self rotor rotation is the

    centralized point for setting adjustment and

    blow bar change. Its the perfect system to

    ease maintenance and to secure the change

    of the blow bars by indexing automatically

    the rotor without operator intervention.

    *Weight dependson selectedoptions

    Technical information

    Crushercomplete 16000kg* (35200lbs)

    Rotorcomplete 6370kg(14000lbs)

    Rotordiameter 1300 mm(51.2)

    Rotorwidth 1500 mm(59)

    Characteristics

    Power 355kW(450hp)

    Maximumfeed size 400mm(16)

    Application Secondaryandtertiary

    Reduction ratio Upto 10:1 in open circuit

    Capacity

    400t/h of 0/40

    (450stph of 0/11/2)

    (feed200mm- 8)

    Capacity (1)

    Topfeed size

    mm(in)

    400

    (16)

    200

    (8)

    80

    (3)

    End product

    mm(in)

    60

    (21/2)

    40

    (11/2)

    40

    (11/2)

    20

    (3/4)

    20

    (3/4)

    15

    (1/2)

    Capacity

    mtph (stph)

    380

    (420)

    300

    (340)

    420

    (460)

    270

    (300)

    350

    (390)

    290

    (330)

    (1) Representscapacitythrough crusher basedon instantaneousproduct sample.

    Impactcrusher capacitychartsare developedfor useasan application tooltoproperlyutilize theNP impactcrushers capabilities. Thecapacity figuresshown

    aboveapply to materialweighing1600 kgper cubic meter or 100poundsper cubic foot. Thecrusher isone componentof thetotal circuit. Assuch, itsperformanceis also dependenton the proper selection andoperation of feeders,

    conveyors, screenssupportingstructure, electric motors, drivecomponentsandsurgebins.

    NP15 features are based on:

    New two part rear frame

    Maintenance bridge

    Breaker plate cassette

    Steeper feed angle (50)