Upload
hanhu
View
215
Download
0
Embed Size (px)
Citation preview
BNA System Requirements
• Operating Systems Supported (64 bit):
‒ Windows Server 2008 R2 (Standard, Datacenter, and Enterprise)
‒ Windows Server 2012 (Standard and Datacenter)
‒ Windows Server 2012 R2 (Standard and Datacenter)
‒ Windows 8 and 8.1 Enterprise
‒ Windows 7 Professional
‒ RedHat Enterprise and Advanced Enterprise
‒ SuSE Enterprise
‒ Oracle Enterprise
BNA System Requirements Cont.
• Memory:
‒ Required: 6 GB RAM
‒ Recommended: 16 GB RAM
• Processor:
‒ Required: 2 Cores (Physical or logical)
‒ Recommended:
• 2 Cores – Small install
• 4 Cores – Medium Install
• 8 Cores – Large Install
• Disk Space:
‒ Required: 20GB (Free space after OS Install)
‒ Recommended:
• 50 GB– Small install
• 150 GB – Medium Install
• 300 GB – Large Install
To download BNA, go to http://my.brocade.comGo to the Downloads Section and look for Management Software
Under Brocade Network Advisor, go to Brocade Network Advisor 12.4.xFind Brocade Network Advisor 12.4.2 (Brocade) GA (This is Target Path)
Click on Network Advisor 12.4.2 for Windows (zip 1.24 GB)
Downloading
• When you download the zip file, extract it.
• When extracted, go to \na1242_brocade_windows\Windows\
‒ Double click install.exe
6
Initial Configuration
Network Advisor Licensed Version requires a licenses key to install. (Select This)Network Advisor – Professional is a free, but limited version.
Click Next
Initial Configuration
21
If you configure DNS for the Server, Use the Server name
If not, Use the IP Address
Select Next
Switch Configuration
• Note: All xxxxxx need to be changed
! Configures Username and Password for local authentication
username xxxxxxx password xxxxxxxx
!
!
! Configures enable password
enable super-user-password xxxxxxxx
!
!Generate a crypto key for SSH
crypto key generate rsa mod 1024
Switch Configuration Cont.
! web services authentication
aaa authentication web-server default local
!
! enable authentication for local super user access
aaa authentication enable default enable
! SSH/Telnet authentication
aaa authentication login default local
!
! Enters Priv mode directly
aaa authentication login privilege-mode
Switch Configuration Cont.
! Configure logging to the BNA Server
logging host X.X.X.X
! Enable FDP and LLDP for neighbor discovery and Mapping
fdp run
lldp run
!
!Enables CDP if Cisco devices are present in the Network
cdp run
35
Switch Configuration Cont.! Configure SNMP read only community string
snmp-server community xxxxxxxx ro
!
! Configure SNMP read/write community string
snmp-server community xxxxxxxx rw
!
! Configure SNMP Contact Information
snmp-server contact xxITxx
snmp-server location xxSchoolxx
!
! Configure SNMP traps to BNA Server
snmp-server host x.x.x.x version v2c
36
BNA
• At this point, you are ready to begin using BNA.
• Open the client and login.
‒ Default Username: administrator
‒ Default Password: password
• Begin Discovery!
37