Upload
sreedhar-patnaikm
View
656
Download
25
Embed Size (px)
Citation preview
BS EN 61241 ......................................................29
BS EN 61277 ......................................................29
BS EN 61290 ......................................................19
BS EN 61291 ......................................................19
BS EN 61300 ......................................................19
BS EN 61400 ......................................................19
BS EN 61753 ......................................................19
BS EN 62024 ......................................................19
BS EN 62271 ......................................................20
BS EN 62431 ................................................20, 29
BS ISO 13356 ...............................................21, 28
BS ISO 17572 .....................................................22
BS IEC 61241 ......................................................29
DD IEC/PAS 60704 ..............................................25
DD IEC/PAS 62246 ..............................................25
DD IEC/PAS 62431 ........................................20, 29
Engineering
BS 1841 ........................................................20, 27
BS 5380 ........................................................14, 28
BS 5778 ........................................................23, 28
BS 5812 ........................................................21, 28
BS 6509 ........................................................20, 28
BS 6955 ..............................................................30
BS 7119 ..............................................................30
BS EN ISO 148 ....................................................12
BS EN 253 ..........................................................12
BS EN 574 ..........................................................26
BS EN 1011 ........................................................27
BS EN 1074 ........................................................12
BS EN 1093 ........................................................14
BS EN ISO 1179 ............................................14, 28
BS EN ISO 1478 ..................................................31
BS EN 1594 ........................................................14
BS EN 1626 ........................................................14
BS EN 1736 ........................................................14
BS EN 2002 ..................................................14, 29
BS EN 2542 ........................................................14
BS EN ISO 3452 ..................................................14
BS EN 3631 ........................................................15
BS EN 3660 ........................................................15
BS EN 3672 ........................................................15
BS EN ISO 3785 ..................................................31
BS EN ISO 4032 ..................................................31
BS EN ISO 4033 ..................................................31
BS EN ISO 4034 ..................................................31
BS EN ISO 4035 ..................................................31
BS EN ISO 4036 ..................................................31
BS EN ISO 4753 ..................................................32
BS EN ISO 5172 ..................................................32
BS EN ISO 6509 ..................................................32
BS EN ISO 7384 ..................................................32
BS EN ISO 7539 ..................................................32
BS EN ISO 7721 ..................................................33
BS EN ISO 8044 ..................................................33
BS EN ISO 8092 ..................................................33
BS EN ISO 8673 ..................................................33
BS EN ISO 8674 ..................................................33
BS EN ISO 8675 ..................................................33
BS EN ISO 9400 ..................................................33
BS EN ISO 9692 ..................................................27
BS EN 10045 ......................................................12
BS EN ISO 10062 ................................................33
BS EN ISO 10087 ................................................33
BS EN 10213 ......................................................25
BS EN ISO 13697 ................................................34
BS EN ISO 13906 ..........................................16, 25
BS EN ISO 14253 ................................................35
BS EN ISO 14880 ................................................35
BS EN 15585 ......................................................17
BS EN ISO 16106 ................................................36
BS EN ISO 16140 ................................................36
BS EN ISO 21871 ................................................36
BS EN ISO 24013 ................................................37
DD ENV ISO 14253 .............................................35
BS ISO 4832 .......................................................37
BS ISO 8036 .......................................................37
BS ISO 9462 .......................................................37
BS ISO 10109 .....................................................38
BS ISO 11884 .....................................................38
BS ISO 13715 .....................................................38
BS ISO 14133 .....................................................39
BS ISO 15214 .....................................................39
BS ISO 15592 .....................................................22
BS ISO 21149 .....................................................40
BS ISO 22715 .....................................................40
BS ISO 22717 .....................................................40
BS ISO 22718 .....................................................40
DD ISO/TS 10272 ................................................38
DD ISO/TS 19036 ................................................40
DD ISO/TS 21872 ................................................28
Electrotechnical
BS 148 ................................................................12
BS 5954 ........................................................18, 28
BS 7253 ........................................................21, 28
BS 7689 ........................................................18, 28
BS 7888 ..............................................................26
BS 8434 ..............................................................28
BS 8488 ..............................................................12
BS EN 1434 ........................................................14
BS EN ISO 14814 ................................................35
BS EN 41003 ......................................................17
BS EN 50083 ......................................................29
BS EN 50164 ......................................................17
BS EN 50165 ......................................................29
BS EN 50200 ......................................................28
BS EN 50342 ......................................................17
BS EN 50413 ......................................................17
BS EN 50483 ................................................17, 18
BS EN 55025 ......................................................18
BS EN 60068 ......................................................18
BS EN 60076 ......................................................29
BS EN 60286 ......................................................18
BS EN 60297 ................................................18, 28
BS EN 60335 ................................................26, 29
BS EN 60384 ......................................................18
BS EN 60432 ......................................................26
BS EN 60512 ......................................................18
BS EN 60519 ......................................................18
BS EN 60694 ......................................................20
BS EN 60703 ................................................18, 28
BS EN 60730 ................................................19, 29
BS EN 60745 ......................................................26
BS EN 60758 ......................................................19
BS EN 60793 ......................................................19
BS EN 61008 ......................................................29
BS EN 61009 ......................................................29
BS EN 61076 ......................................................19
BS EN 61189 ......................................................19
The following British Standards are listed orreferred to in this issue of Update Standardswith the exception of those in ‘New WorkStarted’.
Building and civil engineering
BS 644 ................................................................12
BS 4873 ..............................................................12
BS 5395 ..............................................................25
BS 6954 ..............................................................30
BS 7832 ..............................................................30
BS 8300 ..............................................................12
DD CEN/TS 15717 ..............................................24
BS EN 490 ..........................................................26
BS EN 975 ..........................................................27
BS EN 1501 ........................................................14
BS EN 1645 ........................................................26
BS EN 1647 ........................................................26
BS EN 1999 ........................................................25
BS EN ISO 2860 ..................................................14
BS EN ISO 3164 ..................................................14
BS EN ISO 3450 ..................................................14
BS EN ISO 6682 ..................................................15
BS EN ISO 9288 ..................................................33
BS EN ISO 10211 ..........................................15, 29
BS EN 13120 ......................................................15
BS EN ISO 13370 ................................................25
BS EN ISO 13786 ................................................25
BS EN 13990 ......................................................27
BS EN 14388 ......................................................25
BS EN 14600 ......................................................26
BS EN 15436 ......................................................16
BS EN 15573 ......................................................17
BS EN 26891 ......................................................37
DD ENV 14464 ...................................................27
BS ISO 15686 .....................................................39
NA to BS EN 1993 ...............................................12
Consumer products and services
BS 4311 ..............................................................25
BS 5763 ..............................................................28
BS 6740 ..............................................................30
BS EN 417 ..........................................................12
BS EN ISO 463 ....................................................31
BS EN 1509 ........................................................14
BS EN ISO 2538 ..................................................31
BS EN ISO 3650 ..................................................31
BS EN ISO 5458 ..................................................32
BS EN ISO 5845 ..................................................32
BS EN ISO 6887 ..................................................32
BS EN ISO 7932 ..................................................33
BS EN ISO 8785 ..................................................33
BS EN ISO 10272 ................................................33
BS EN ISO 11145 ................................................33
BS EN ISO 11252 ................................................15
BS EN ISO 11442 ................................................34
BS EN ISO 11554 ................................................15
BS EN ISO 13565 ................................................34
British Standards – Quick Reference Guide
4 Update Standards Apr 2009Prices may be subject to change.
New Eurocodes supplementavailable to download
FREE atwww.bsigroup.com/bip2159
BS 7253 ........................................................21, 28
BS 8405 ..............................................................26
BS 9999 ..............................................................28
DD CEN ISO/TS 17665 ........................................25
DD 9999 .............................................................28
BS EN ISO/TR 11688 ...........................................30
BS EN ISO 389 ....................................................31
BS EN 531 ....................................................15, 28
BS EN 552 ..........................................................28
BS EN 737 ....................................................28, 29
BS EN 738 ....................................................15, 29
BS EN ISO 6360 ..................................................32
BS EN ISO 6877 ..................................................32
BS EN ISO 7197 ..................................................32
BS EN ISO 7396 ............................................28, 29
BS EN ISO 8536 ..................................................33
BS EN ISO 9241 ..................................................33
BS EN ISO 10524 ....................................15, 29, 33
BS EN ISO 10848 ................................................33
BS EN ISO 11064 ..........................................15, 33
BS EN ISO 11137 ................................................28
BS EN ISO 11612 ..........................................15, 28
BS EN ISO 11688 ................................................34
BS EN ISO 11689 ................................................25
BS EN ISO 11690 ................................................34
BS EN ISO 11737 ................................................34
BS EN ISO 11979 ................................................15
BS EN ISO 12402 ................................................34
BS EN 13463 ......................................................15
BS EN ISO 13732 ................................................16
BS EN ISO 14738 ................................................16
BS EN ISO 15378 ................................................36
BS EN ISO 15536 ................................................16
BS EN ISO 16000 ................................................36
BS EN ISO 17201 ................................................36
BS EN ISO 17249 ................................................36
BS EN ISO 22478 ................................................37
BS EN ISO 22870 ................................................37
BS EN ISO 23631 ................................................37
BS EN 60601 ......................................................18
BS ISO 5832 ...........................................20, 28, 37
BS ISO 5834 .................................................20, 21
BS ISO 7206 .................................................21, 28
BS ISO 10651 .....................................................38
BS ISO 12189 .....................................................21
BS ISO 13356 ...............................................21, 28
BS ISO 14520 .....................................................39
BS ISO 15010 .....................................................27
BS ISO 16000 .....................................................22
BS ISO 16402 .....................................................22
BS ISO 16832 .....................................................39
BS ISO 17734 .....................................................39
BS ISO 18192 .....................................................22
BS ISO 20160 .....................................................23
BS ISO 22892 .....................................................40
DD ISO/TS 4869 ..................................................37
DD ISO/TS 15666 ................................................39
PD ISO/TR 11044 ................................................24
Information systems
BS 5249 ..............................................................28
BS 7083 ..............................................................27
DD CEN/TS 15699 ..............................................24
BS EN ISO/IEC 15415 ..........................................31
BS EN ISO/IEC 15426 ..........................................31
BS ISO 11001 .....................................................21
BS ISO 11155 .....................................................21
BS ISO 11451 .....................................................38
BS ISO 11486 .....................................................38
BS ISO 11898 .....................................................38
BS ISO 12003 .....................................................21
BS ISO 12161 .....................................................38
BS ISO 13215 .....................................................38
BS ISO 13216 .....................................................38
BS ISO 13486 .....................................................38
BS ISO 14572 .....................................................39
BS ISO 14726 ...............................................21, 29
BS ISO 15364 .....................................................22
BS ISO 15516 .....................................................39
BS ISO 15633 .....................................................22
BS ISO 15736 .....................................................39
BS ISO 16063 .....................................................39
BS ISO 16111 .....................................................22
BS ISO 16172 .....................................................39
BS ISO 16454 .....................................................22
BS ISO 16750 .....................................................39
BS ISO 16833 .....................................................39
BS ISO 17356 .....................................................39
BS ISO 18431 .....................................................26
BS ISO 18813 .....................................................39
BS ISO 20283 .....................................................40
BS ISO 20652 .....................................................40
BS ISO 20653 .....................................................40
BS ISO 20828 .....................................................40
BS ISO 21013 .....................................................23
BS ISO 21439 .....................................................23
BS ISO 21460 .....................................................23
BS ISO 21648 .....................................................23
BS ISO 22010 .....................................................23
BS ISO 22108 .....................................................23
BS ISO 22434 .....................................................23
BS ISO 22663 .....................................................23
BS ISO 22666 .....................................................23
BS ISO 22670 .....................................................40
BS ISO 22856 .....................................................23
BS ISO 22896 .....................................................40
BS ISO 22900 .....................................................23
BS ISO 22902 .....................................................40
BS ISO 22915 ...............................................23, 28
BS ISO 23041 .....................................................23
BS ISO 23671 .....................................................40
BS ISO 24393 .....................................................23
BS ISO 24638 .....................................................23
DD ISO/TS 11155 ................................................21
DD ISO/TS 13399 ................................................24
PD CEN/TR 13930 ...............................................24
PD CEN/TR 13931 ...............................................24
PD CEN/TR 13932 ...............................................24
PD 5500 .............................................................24
PD ISO/TR 16765 ................................................39
PD ISO/TR 18792 ................................................24
BS 4A 4 ........................................................14, 29
BS AU 163a ........................................................40
BS AU 199a ..................................................20, 29
Health and environment
BS 5588 ..............................................................28
BS 6391 ..............................................................12
BS 7251 ........................................................21, 28
BS 7252 ........................................................20, 28
BS EN 10340 ......................................................25
BS EN ISO 10666 ................................................33
BS EN ISO 11306 ................................................33
BS EN ISO 11782 ................................................34
BS EN ISO 11844 ................................................34
BS EN 12245 ......................................................15
BS EN 13218 ......................................................26
BS EN ISO 13500 ................................................16
BS EN 13648 ......................................................16
BS EN ISO 13680 ................................................16
BS EN 13802 ......................................................27
BS EN 14033 ......................................................16
BS EN 14071 ......................................................34
BS EN 14129 ......................................................35
BS EN 14140 ......................................................35
BS EN 14286 ......................................................16
BS EN ISO 14323 ................................................35
BS EN 14511 ......................................................25
BS EN ISO 14691 ................................................16
BS EN ISO 14726 ..........................................21, 29
BS EN 15227 ......................................................16
BS EN ISO 15364 ................................................22
BS EN 15427 ......................................................16
BS EN ISO 15480 ................................................36
BS EN ISO 15481 ................................................36
BS EN ISO 15482 ................................................36
BS EN ISO 15483 ................................................36
BS EN 15609 ......................................................17
BS EN ISO 15614 ................................................36
BS EN ISO 15616 ................................................27
BS EN 15632 ......................................................17
BS EN 15698 ......................................................17
BS EN ISO 16135 ................................................36
BS EN ISO 16136 ................................................36
BS EN ISO 16137 ................................................36
BS EN ISO 16138 ................................................36
BS EN ISO 16139 ................................................36
BS EN ISO 16708 ................................................36
BS EN ISO 16784 ................................................36
BS EN 20273 ......................................................36
BS EN ISO 21469 ................................................36
BS EN ISO 21787 ................................................36
BS EN ISO 25457 ................................................17
BS EN 60204 ......................................................18
BS EN 60974 ......................................................19
BS EN 61310 ......................................................19
BS EN 62061 ......................................................26
BS ISO 730 ...................................................20, 27
BS ISO 817 .........................................................20
BS ISO 1051 .......................................................37
BS ISO 1728 .......................................................37
BS ISO 2332 .................................................20, 28
BS ISO 4040 .................................................20, 29
BS ISO 4141 .................................................20, 37
BS ISO 4161 .......................................................37
BS ISO 4254 .......................................................20
BS ISO 5348 .......................................................37
BS ISO 5416 .......................................................20
BS ISO 6279 .................................................21, 28
BS ISO 6550 .......................................................21
BS ISO 7578 .......................................................21
BS ISO 7635 .......................................................37
BS ISO 8820 .......................................................21
BS ISO 10766 .....................................................38
BS ISO 10817 .....................................................38
Update Standards Apr 2009 Prices may be subject to change. 5
British Standards – Quick Reference Guide continued...
BS EN ISO 14528 ................................................35
BS EN ISO 14529 ................................................35
BS EN ISO 14530 ................................................35
BS EN ISO 14851 ................................................35
BS EN ISO 15103 ..........................................17, 29
BS EN 15199 ......................................................16
BS EN ISO 15252 ................................................36
BS EN ISO 15310 ................................................36
BS EN 15475 ......................................................16
BS EN 15476 ......................................................16
BS EN 15477 ......................................................16
BS EN 15478 ......................................................16
BS EN 15479 ......................................................16
BS EN 15558 ......................................................17
BS EN 15647 ......................................................17
BS EN ISO 15880 ................................................36
BS EN ISO 17232 ..........................................17, 29
BS EN ISO 22088 ..........................................36, 37
BS EN ISO 22288 ..........................................17, 29
BS EN ISO 22854 ..........................................17, 29
BS EN 24641 ................................................15, 29
BS EN 26801 ......................................................37
BS EN ISO 28941 ..........................................17, 29
BS ISO 812 ...................................................20, 27
BS ISO 815 .............................................20, 26, 27
BS ISO 871 .........................................................37
BS ISO 1382 .......................................................20
BS ISO 2782 .......................................................37
BS ISO 2834 .......................................................37
BS ISO 2846 .......................................................37
BS ISO 4664 .......................................................37
BS ISO 4665 .......................................................37
BS ISO 5293 .......................................................26
BS ISO/TR 5659 ...................................................37
BS ISO 6145 .......................................................20
BS ISO 6721 .......................................................37
BS ISO 7278 .......................................................37
BS ISO 8013 .......................................................37
BS ISO 10147 .....................................................26
BS ISO 10840 .....................................................21
BS ISO 11084 .....................................................38
BS ISO 11345 .....................................................38
BS ISO 11357 ...............................................21, 38
BS ISO 11359 .....................................................38
BS ISO 11413 ...............................................21, 27
BS ISO 11414 ...............................................21, 27
BS ISO 11424 .....................................................38
BS ISO 11425 .....................................................38
BS ISO 12637 .....................................................38
BS ISO 12642 .....................................................38
BS ISO 12647 .....................................................38
BS ISO 13740 .....................................................38
BS ISO 14703 .....................................................21
BS ISO 14849 .....................................................39
BS ISO 14898 .....................................................39
BS ISO 15014 .....................................................22
BS ISO 15034 .....................................................39
BS ISO 15038 .....................................................39
BS ISO 15040 .....................................................39
BS ISO 15106 .....................................................22
BS ISO 15726 .....................................................22
BS ISO 18132 .....................................................39
BS ISO 18752 .....................................................39
BS ISO 19003 ...............................................22, 27
BS ISO 19712 .....................................................22
BS EN ISO 1401 ..................................................31
BS EN ISO 1924 ..................................................14
BS EN ISO 2082 ............................................14, 29
BS EN ISO 2398 ..................................................14
BS EN ISO 2555 ..................................................31
BS EN ISO 2578 ..................................................31
BS EN ISO 2818 ..................................................25
BS EN ISO 3001 ..................................................31
BS EN ISO 3219 ..................................................31
BS EN ISO 3861 ..................................................15
BS EN ISO 3915 ..................................................31
BS EN ISO 4263 ..................................................31
BS EN ISO 4630 ..................................................32
BS EN ISO 4641 ............................................15, 29
BS EN ISO 4892 ..................................................32
BS EN ISO 5269 ..................................................32
BS EN ISO 5398 ..................................................15
BS EN ISO 5774 ..................................................32
BS EN ISO 6145 ..................................................20
BS EN ISO 6271 ..................................................32
BS EN ISO 6721 ..................................................32
BS EN ISO 6744 ..................................................32
BS EN ISO 6808 ..................................................32
BS EN ISO 7233 ..................................................32
BS EN ISO 7263 ..................................................15
BS EN ISO 7278 ..................................................32
BS EN ISO 7326 ..................................................32
BS EN ISO 7327 ..................................................32
BS EN ISO 7590 ..................................................15
BS EN ISO 7662 ..................................................32
BS EN ISO 7751 ..................................................33
BS EN ISO 8028 ..................................................33
BS EN ISO 8033 ..................................................33
BS EN ISO 8308 ..................................................33
BS EN ISO 8975 ..................................................33
BS EN ISO 8988 ..................................................33
BS EN ISO 9073 ..................................................15
BS EN ISO 10082 ................................................33
BS EN ISO 10101 ................................................33
BS EN ISO 11358 ................................................33
BS EN ISO 11403 ................................................34
BS EN ISO 11541 ................................................34
BS EN 12330 ................................................14, 29
BS EN 12476 ......................................................34
BS EN ISO 12625 ................................................34
BS EN 12915 ......................................................25
BS EN 13245 ......................................................15
BS EN 13297 ......................................................25
BS EN 13335 ................................................17, 29
BS EN ISO 13468 ................................................34
BS EN 13540 ................................................17, 29
BS EN 13598 ......................................................16
BS EN 13630 ......................................................34
BS EN 13631 ......................................................34
BS EN ISO 13736 ................................................16
BS EN 13763 ......................................................34
BS EN 13938 ......................................................34
BS EN ISO 14111 ................................................34
BS EN ISO 14126 ................................................35
BS EN 14430 ......................................................35
BS EN 14431 ......................................................35
BS EN 14483 ......................................................35
BS EN 14517 ................................................17, 29
BS EN ISO 14526 ................................................35
BS EN ISO 14527 ................................................35
BS EN ISO 19115 ................................................26
BS EN 61158 ......................................................19
BS ISO 3334 .......................................................37
BS ISO 6709 .................................................26, 28
BS ISO/IEC 9798 .................................................21
BS ISO/IEC 11695 ...............................................21
BS ISO/IEC 12207 ...............................................21
BS ISO/IEC 15408 ...............................................22
BS ISO/IEC 15946 ...............................................22
BS ISO/IEC 16022 ...............................................39
BS ISO/IEC 19757 ...............................................22
BS ISO/IEC 19796 ...............................................23
BS ISO/IEC 21827 ...............................................23
BS ISO 23081 .....................................................40
BS ISO/IEC 24727 ...............................................23
BS ISO/IEC 25012 ...............................................23
PD ISO/IEC TR 14143 ..........................................39
PD ISO/IEC TR 15504 ..........................................24
Management systems
BS 5233 ..............................................................28
BS 6001 ..............................................................30
BS 6002 ..............................................................30
BS EN 60027 ......................................................18
BS EN 61649 ................................................19, 29
BS ISO 5725 .......................................................37
BS ISO 8422 .......................................................37
BS ISO 11843 .....................................................21
BS ISO 14064 ...............................................38, 39
BS ISO 21747 .....................................................40
BS ISO 80000 .....................................................40
BS IEC 61649 ...............................................19, 29
DD ISO/TS 21749 ................................................40
Materials and chemicals
BS 903 .............................................20, 22, 27, 30
BS 2000 ..............................................................29
BS 2782 ...............................21, 27, 30, 31, 32, 33
BS 3156 ........................................................27, 34
BS 6782 ........................................................32, 36
BS 7158 ..............................................................16
BS 7702 ..............................................................30
DD CEN/TS 15398 ..............................................24
DD CEN/TS 15475 ..............................................16
DD CEN/TS 15476 ..............................................16
DD CEN/TS 15477 ..............................................16
DD CEN/TS 15478 ..............................................16
DD CEN/TS 15479 ..............................................16
DD CEN/TS 15558 ..............................................17
DD CEN/TS 15705 ..............................................24
BS EN ISO 61 ......................................................30
BS EN ISO 105 ....................................................12
BS EN ISO 119 ....................................................30
BS EN ISO 120 ....................................................31
BS EN ISO 172 ....................................................31
BS EN ISO 175 ....................................................31
BS EN ISO 177 ....................................................31
BS EN ISO 182 ....................................................31
BS EN ISO 489 ....................................................31
BS EN 623 ..........................................................31
BS EN 820 ..........................................................31
BS EN 821 ..........................................................31
BS EN 1007 ........................................................31
BS EN ISO 1307 ..................................................31
British Standards – Quick Reference Guide continued...
6 Update Standards Apr 2009Prices may be subject to change.
BS EN 3660 ........................................................15
BS EN 3672 ........................................................15
BS EN ISO 3785 ..................................................31
BS EN ISO 3861 ..................................................15
BS EN ISO 3915 ..................................................31
BS EN ISO 4032 ..................................................31
BS EN ISO 4033 ..................................................31
BS EN ISO 4034 ..................................................31
BS EN ISO 4035 ..................................................31
BS EN ISO 4036 ..................................................31
BS EN ISO 4263 ..................................................31
BS EN ISO 4630 ..................................................32
BS EN ISO 4641 ............................................15, 29
BS EN ISO 4753 ..................................................32
BS EN ISO 4892 ..................................................32
BS EN ISO 5172 ..................................................32
BS EN ISO 5269 ..................................................32
BS EN ISO 5398 ..................................................15
BS EN ISO 5458 ..................................................32
BS EN ISO 5774 ..................................................32
BS EN ISO 5845 ..................................................32
BS EN ISO 6145 ..................................................20
BS EN ISO 6271 ..................................................32
BS EN ISO 6360 ..................................................32
BS EN ISO 6509 ..................................................32
BS EN ISO 6682 ..................................................15
BS EN ISO 6721 ..................................................32
BS EN ISO 6744 ..................................................32
BS EN ISO 6808 ..................................................32
BS EN ISO 6877 ..................................................32
BS EN ISO 6887 ..................................................32
BS EN ISO 7197 ..................................................32
BS EN ISO 7233 ..................................................32
BS EN ISO 7263 ..................................................15
BS EN ISO 7278 ..................................................32
BS EN ISO 7326 ..................................................32
BS EN ISO 7327 ..................................................32
BS EN ISO 7384 ..................................................32
BS EN ISO 7396 ............................................28, 29
BS EN ISO 7539 ..................................................32
BS EN ISO 7590 ..................................................15
BS EN ISO 7662 ..................................................32
BS EN ISO 7721 ..................................................33
BS EN ISO 7751 ..................................................33
BS EN ISO 7932 ..................................................33
BS EN ISO 8028 ..................................................33
BS EN ISO 8033 ..................................................33
BS EN ISO 8044 ..................................................33
BS EN ISO 8092 ..................................................33
BS EN ISO 8308 ..................................................33
BS EN ISO 8536 ..................................................33
BS EN ISO 8673 ..................................................33
BS EN ISO 8674 ..................................................33
BS EN ISO 8675 ..................................................33
BS EN ISO 8785 ..................................................33
BS EN ISO 8975 ..................................................33
BS EN ISO 8988 ..................................................33
BS EN ISO 9073 ..................................................15
BS EN ISO 9241 ..................................................33
BS EN ISO 9288 ..................................................33
BS EN ISO 9400 ..................................................33
BS EN ISO 9692 ..................................................27
BS EN 10045 ......................................................12
BS EN ISO 10062 ................................................33
BS EN ISO 10082 ................................................33
DD CEN/TS 15705 ..............................................24
DD CEN/TS 15717 ..............................................24
DD CEN ISO/TS 17665 ........................................25
DD 9999 .............................................................28
BS EN ISO 61 ......................................................30
BS EN ISO/TR 11688 ...........................................30
BS EN ISO 105 ....................................................12
BS EN ISO 119 ....................................................30
BS EN ISO 120 ....................................................31
BS EN ISO 148 ....................................................12
BS EN ISO 172 ....................................................31
BS EN ISO 175 ....................................................31
BS EN ISO 177 ....................................................31
BS EN ISO 182 ....................................................31
BS EN 253 ..........................................................12
BS EN ISO 389 ....................................................31
BS EN 417 ..........................................................12
BS EN ISO 463 ....................................................31
BS EN ISO 489 ....................................................31
BS EN 490 ..........................................................26
BS EN 531 ....................................................15, 28
BS EN 552 ..........................................................28
BS EN 574 ..........................................................26
BS EN 623 ..........................................................31
BS EN 737 ....................................................28, 29
BS EN 738 ....................................................15, 29
BS EN 820 ..........................................................31
BS EN 821 ..........................................................31
BS EN 975 ..........................................................27
BS EN ISO/IEC 15415 ..........................................31
BS EN ISO/IEC 15426 ..........................................31
BS EN 1007 ........................................................31
BS EN 1011 ........................................................27
BS EN 1074 ........................................................12
BS EN 1093 ........................................................14
BS EN ISO 1179 ............................................14, 28
BS EN ISO 1307 ..................................................31
BS EN ISO 1401 ..................................................31
BS EN 1434 ........................................................14
BS EN ISO 1478 ..................................................31
BS EN 1501 ........................................................14
BS EN 1509 ........................................................14
BS EN 1594 ........................................................14
BS EN 1626 ........................................................14
BS EN 1645 ........................................................26
BS EN 1647 ........................................................26
BS EN 1736 ........................................................14
BS EN ISO 1924 ..................................................14
BS EN 1999 ........................................................25
BS EN 2002 ..................................................14, 29
BS EN ISO 2082 ............................................14, 29
BS EN ISO 2398 ..................................................14
BS EN ISO 2538 ..................................................31
BS EN 2542 ........................................................14
BS EN ISO 2555 ..................................................31
BS EN ISO 2578 ..................................................31
BS EN ISO 2818 ..................................................25
BS EN ISO 2860 ..................................................14
BS EN ISO 3001 ..................................................31
BS EN ISO 3164 ..................................................14
BS EN ISO 3219 ..................................................31
BS EN ISO 3450 ..................................................14
BS EN ISO 3452 ..................................................14
BS EN 3631 ........................................................15
BS EN ISO 3650 ..................................................31
BS ISO 20765 .....................................................23
BS ISO 21509 .....................................................40
BS ISO 24033 .....................................................23
BS ISO 25137 .....................................................24
BS ISO 26423 .....................................................24
BS ISO 26602 .....................................................24
BS ISO 27831 .....................................................24
DD ISO/TS 29041 ................................................25
PD CEN/TR 15367 ...............................................24
PD CEN/TR 15738 ...............................................24
PD ISO/TR 12885 ................................................24
Alpha-numeric sequence of BritishStandards quoted in this issue
BS 148 ................................................................12
BS 644 ................................................................12
BS 903 .............................................20, 22, 27, 30
BS 1841 ........................................................20, 27
BS 2000 ..............................................................29
BS 2782 ...............................21, 27, 30, 31, 32, 33
BS 3156 ........................................................27, 34
BS 4311 ..............................................................25
BS 4873 ..............................................................12
BS 5233 ..............................................................28
BS 5249 ..............................................................28
BS 5380 ........................................................14, 28
BS 5395 ..............................................................25
BS 5588 ..............................................................28
BS 5763 ..............................................................28
BS 5778 ........................................................23, 28
BS 5812 ........................................................21, 28
BS 5954 ........................................................18, 28
BS 6001 ..............................................................30
BS 6002 ..............................................................30
BS 6391 ..............................................................12
BS 6509 ........................................................20, 28
BS 6740 ..............................................................30
BS 6782 ........................................................32, 36
BS 6954 ..............................................................30
BS 6955 ..............................................................30
BS 7083 ..............................................................27
BS 7119 ..............................................................30
BS 7158 ..............................................................16
BS 7251 ........................................................21, 28
BS 7252 ........................................................20, 28
BS 7253 ........................................................21, 28
BS 7689 ........................................................18, 28
BS 7702 ..............................................................30
BS 7832 ..............................................................30
BS 7888 ..............................................................26
BS 8300 ..............................................................12
BS 8405 ..............................................................26
BS 8434 ..............................................................28
BS 8488 ..............................................................12
BS 9999 ..............................................................28
BS 25777 ............................................................12
BIP 3082 .............................................................25
DD CEN/TS 15398 ..............................................24
DD CEN/TS 15475 ..............................................16
DD CEN/TS 15476 ..............................................16
DD CEN/TS 15477 ..............................................16
DD CEN/TS 15478 ..............................................16
DD CEN/TS 15479 ..............................................16
DD CEN/TS 15558 ..............................................17
DD CEN/TS 15699 ..............................................24
British Standards – Quick Reference Guide continued...
8 Update Standards Apr 2009Prices may be subject to change.
BS EN ISO 21787 ................................................36
BS EN ISO 21871 ................................................36
BS EN ISO 22088 ..........................................36, 37
BS EN ISO 22288 ..........................................17, 29
BS EN ISO 22478 ................................................37
BS EN ISO 22854 ..........................................17, 29
BS EN ISO 22870 ................................................37
BS EN ISO 23631 ................................................37
BS EN ISO 24013 ................................................37
BS EN 24641 ................................................15, 29
BS EN ISO 25457 ................................................17
BS EN 26801 ......................................................37
BS EN 26891 ......................................................37
BS EN ISO 28941 ..........................................17, 29
BS EN 41003 ......................................................17
BS EN 50083 ......................................................29
BS EN 50164 ......................................................17
BS EN 50165 ......................................................29
BS EN 50200 ......................................................28
BS EN 50342 ......................................................17
BS EN 50413 ......................................................17
BS EN 50483 ................................................17, 18
BS EN 55025 ......................................................18
BS EN 60027 ......................................................18
BS EN 60068 ......................................................18
BS EN 60076 ......................................................29
BS EN 60204 ......................................................18
BS EN 60286 ......................................................18
BS EN 60297 ................................................18, 28
BS EN 60335 ................................................26, 29
BS EN 60384 ......................................................18
BS EN 60432 ......................................................26
BS EN 60512 ......................................................18
BS EN 60519 ......................................................18
BS EN 60601 ......................................................18
BS EN 60694 ......................................................20
BS EN 60703 ................................................18, 28
BS EN 60730 ................................................19, 29
BS EN 60745 ......................................................26
BS EN 60758 ......................................................19
BS EN 60793 ......................................................19
BS EN 60974 ......................................................19
BS EN 61008 ......................................................29
BS EN 61009 ......................................................29
BS EN 61076 ......................................................19
BS EN 61158 ......................................................19
BS EN 61189 ......................................................19
BS EN 61241 ......................................................29
BS EN 61277 ......................................................29
BS EN 61290 ......................................................19
BS EN 61291 ......................................................19
BS EN 61300 ......................................................19
BS EN 61310 ......................................................19
BS EN 61400 ......................................................19
BS EN 61649 ................................................19, 29
BS EN 61753 ......................................................19
BS EN 62024 ......................................................19
BS EN 62061 ......................................................26
BS EN 62271 ......................................................20
BS EN 62431 ................................................20, 29
DD ENV ISO 14253 .............................................35
DD ENV 14464 ...................................................27
BS ISO 730 ...................................................20, 27
BS ISO 812 ...................................................20, 27
BS ISO 815 .............................................20, 26, 27
BS EN 14286 ......................................................16
BS EN ISO 14323 ................................................35
BS EN 14388 ......................................................25
BS EN 14430 ......................................................35
BS EN 14431 ......................................................35
BS EN 14483 ......................................................35
BS EN 14511 ......................................................25
BS EN 14517 ................................................17, 29
BS EN ISO 14526 ................................................35
BS EN ISO 14527 ................................................35
BS EN ISO 14528 ................................................35
BS EN ISO 14529 ................................................35
BS EN ISO 14530 ................................................35
BS EN 14600 ......................................................26
BS EN ISO 14691 ................................................16
BS EN ISO 14726 ..........................................21, 29
BS EN ISO 14738 ................................................16
BS EN ISO 14814 ................................................35
BS EN ISO 14851 ................................................35
BS EN ISO 14880 ................................................35
BS EN ISO 15103 ..........................................17, 29
BS EN 15199 ......................................................16
BS EN 15227 ......................................................16
BS EN ISO 15252 ................................................36
BS EN ISO 15310 ................................................36
BS EN ISO 15364 ................................................22
BS EN ISO 15378 ................................................36
BS EN 15427 ......................................................16
BS EN 15436 ......................................................16
BS EN 15475 ......................................................16
BS EN 15476 ......................................................16
BS EN 15477 ......................................................16
BS EN 15478 ......................................................16
BS EN 15479 ......................................................16
BS EN ISO 15480 ................................................36
BS EN ISO 15481 ................................................36
BS EN ISO 15482 ................................................36
BS EN ISO 15483 ................................................36
BS EN ISO 15536 ................................................16
BS EN 15558 ......................................................17
BS EN 15573 ......................................................17
BS EN 15585 ......................................................17
BS EN 15609 ......................................................17
BS EN ISO 15614 ................................................36
BS EN ISO 15616 ................................................27
BS EN 15632 ......................................................17
BS EN 15647 ......................................................17
BS EN 15698 ......................................................17
BS EN ISO 15880 ................................................36
BS EN ISO 16000 ................................................36
BS EN ISO 16106 ................................................36
BS EN ISO 16135 ................................................36
BS EN ISO 16136 ................................................36
BS EN ISO 16137 ................................................36
BS EN ISO 16138 ................................................36
BS EN ISO 16139 ................................................36
BS EN ISO 16140 ................................................36
BS EN ISO 16708 ................................................36
BS EN ISO 16784 ................................................36
BS EN ISO 17201 ................................................36
BS EN ISO 17232 ..........................................17, 29
BS EN ISO 17249 ................................................36
BS EN ISO 19115 ................................................26
BS EN 20273 ......................................................36
BS EN ISO 21469 ................................................36
BS EN ISO 10087 ................................................33
BS EN ISO 10101 ................................................33
BS EN ISO 10211 ..........................................15, 29
BS EN 10213 ......................................................25
BS EN ISO 10272 ................................................33
BS EN 10340 ......................................................25
BS EN ISO 10524 ....................................15, 29, 33
BS EN ISO 10666 ................................................33
BS EN ISO 10848 ................................................33
BS EN ISO 11064 ..........................................15, 33
BS EN ISO 11137 ................................................28
BS EN ISO 11145 ................................................33
BS EN ISO 11252 ................................................15
BS EN ISO 11306 ................................................33
BS EN ISO 11358 ................................................33
BS EN ISO 11403 ................................................34
BS EN ISO 11442 ................................................34
BS EN ISO 11541 ................................................34
BS EN ISO 11554 ................................................15
BS EN ISO 11612 ..........................................15, 28
BS EN ISO 11688 ................................................34
BS EN ISO 11689 ................................................25
BS EN ISO 11690 ................................................34
BS EN ISO 11737 ................................................34
BS EN ISO 11782 ................................................34
BS EN ISO 11844 ................................................34
BS EN ISO 11979 ................................................15
BS EN 12245 ......................................................15
BS EN 12330 ................................................14, 29
BS EN ISO 12402 ................................................34
BS EN 12476 ......................................................34
BS EN ISO 12625 ................................................34
BS EN 12915 ......................................................25
BS EN 13120 ......................................................15
BS EN 13218 ......................................................26
BS EN 13245 ......................................................15
BS EN 13297 ......................................................25
BS EN 13335 ................................................17, 29
BS EN ISO 13370 ................................................25
BS EN 13463 ......................................................15
BS EN ISO 13468 ................................................34
BS EN ISO 13500 ................................................16
BS EN 13540 ................................................17, 29
BS EN ISO 13565 ................................................34
BS EN 13598 ......................................................16
BS EN 13630 ......................................................34
BS EN 13631 ......................................................34
BS EN 13648 ......................................................16
BS EN ISO 13680 ................................................16
BS EN ISO 13697 ................................................34
BS EN ISO 13732 ................................................16
BS EN ISO 13736 ................................................16
BS EN 13763 ......................................................34
BS EN ISO 13786 ................................................25
BS EN 13802 ......................................................27
BS EN ISO 13906 ..........................................16, 25
BS EN 13938 ......................................................34
BS EN 13990 ......................................................27
BS EN 14033 ......................................................16
BS EN 14071 ......................................................34
BS EN ISO 14111 ................................................34
BS EN ISO 14126 ................................................35
BS EN 14129 ......................................................35
BS EN 14140 ......................................................35
BS EN ISO 14253 ................................................35
Alpha-numeric Sequence of British Standards continued...
10 Update Standards Apr 2009Prices may be subject to change.
BS ISO 21509 .....................................................40
BS ISO 21648 .....................................................23
BS ISO 21747 .....................................................40
BS ISO/IEC 21827 ...............................................23
BS ISO 22010 .....................................................23
BS ISO 22108 .....................................................23
BS ISO 22434 .....................................................23
BS ISO 22663 .....................................................23
BS ISO 22666 .....................................................23
BS ISO 22670 .....................................................40
BS ISO 22715 .....................................................40
BS ISO 22717 .....................................................40
BS ISO 22718 .....................................................40
BS ISO 22856 .....................................................23
BS ISO 22892 .....................................................40
BS ISO 22896 .....................................................40
BS ISO 22900 .....................................................23
BS ISO 22902 .....................................................40
BS ISO 22915 ...............................................23, 28
BS ISO 23041 .....................................................23
BS ISO 23081 .....................................................40
BS ISO 23671 .....................................................40
BS ISO 24033 .....................................................23
BS ISO 24393 .....................................................23
BS ISO 24638 .....................................................23
BS ISO/IEC 24727 ...............................................23
BS ISO/IEC 25012 ...............................................23
BS ISO 25137 .....................................................24
BS ISO 26423 .....................................................24
BS ISO 26602 .....................................................24
BS ISO 27831 .....................................................24
BS ISO 80000 .....................................................40
BS IEC 61241 ......................................................29
BS IEC 61649 ...............................................19, 29
DD ISO/TS 4869 ..................................................37
DD ISO/TS 10272 ................................................38
DD ISO/TS 11155 ................................................21
DD ISO/TS 13399 ................................................24
DD ISO/TS 15666 ................................................39
DD ISO/TS 19036 ................................................40
DD ISO/TS 21749 ................................................40
DD ISO/TS 21872 ................................................28
DD ISO/TS 29041 ................................................25
DD IEC/PAS 60704 ..............................................25
DD IEC/PAS 62246 ..............................................25
DD IEC/PAS 62431 ........................................20, 29
NA to BS EN 1993 ...............................................12
PD CEN/TR 13930 ...............................................24
PD CEN/TR 13931 ...............................................24
PD CEN/TR 13932 ...............................................24
PD CEN/TR 15367 ...............................................24
PD CEN/TR 15738 ...............................................24
PD 5500 .............................................................24
PD ISO/TR 11044 ................................................24
PD ISO/TR 12885 ................................................24
PD ISO/IEC TR 14143 ..........................................39
PD ISO/IEC TR 15504 ..........................................24
PD ISO/TR 16765 ................................................39
PD ISO/TR 18792 ................................................24
BS 4A 4 ........................................................14, 29
BS AU 163a ........................................................40
BS AU 199a ..................................................20, 29
PAS 99 ................................................................29
BS ISO 12637 .....................................................38
BS ISO 12642 .....................................................38
BS ISO 12647 .....................................................38
BS ISO 13215 .....................................................38
BS ISO 13216 .....................................................38
BS ISO 13356 ...............................................21, 28
BS ISO 13486 .....................................................38
BS ISO 13715 .....................................................38
BS ISO 13740 .....................................................38
BS ISO 14064 ...............................................38, 39
BS ISO 14133 .....................................................39
BS ISO 14520 .....................................................39
BS ISO 14572 .....................................................39
BS ISO 14703 .....................................................21
BS ISO 14726 ...............................................21, 29
BS ISO 14849 .....................................................39
BS ISO 14898 .....................................................39
BS ISO 15010 .....................................................27
BS ISO 15014 .....................................................22
BS ISO 15034 .....................................................39
BS ISO 15038 .....................................................39
BS ISO 15040 .....................................................39
BS ISO 15106 .....................................................22
BS ISO 15214 .....................................................39
BS ISO 15364 .....................................................22
BS ISO/IEC 15408 ...............................................22
BS ISO 15516 .....................................................39
BS ISO 15592 .....................................................22
BS ISO 15633 .....................................................22
BS ISO 15686 .....................................................39
BS ISO 15726 .....................................................22
BS ISO 15736 .....................................................39
BS ISO/IEC 15946 ...............................................22
BS ISO 16000 .....................................................22
BS ISO/IEC 16022 ...............................................39
BS ISO 16063 .....................................................39
BS ISO 16111 .....................................................22
BS ISO 16172 .....................................................39
BS ISO 16402 .....................................................22
BS ISO 16454 .....................................................22
BS ISO 16750 .....................................................39
BS ISO 16832 .....................................................39
BS ISO 16833 .....................................................39
BS ISO 17356 .....................................................39
BS ISO 17572 .....................................................22
BS ISO 17734 .....................................................39
BS ISO 18132 .....................................................39
BS ISO 18192 .....................................................22
BS ISO 18431 .....................................................26
BS ISO 18752 .....................................................39
BS ISO 18813 .....................................................39
BS ISO 19003 ...............................................22, 27
BS ISO 19712 .....................................................22
BS ISO/IEC 19757 ...............................................22
BS ISO/IEC 19796 ...............................................23
BS ISO 20160 .....................................................23
BS ISO 20283 .....................................................40
BS ISO 20652 .....................................................40
BS ISO 20653 .....................................................40
BS ISO 20765 .....................................................23
BS ISO 20828 .....................................................40
BS ISO 21013 .....................................................23
BS ISO 21149 .....................................................40
BS ISO 21439 .....................................................23
BS ISO 21460 .....................................................23
BS ISO 817 .........................................................20
BS ISO 871 .........................................................37
BS ISO 1051 .......................................................37
BS ISO 1382 .......................................................20
BS ISO 1728 .......................................................37
BS ISO 2332 .................................................20, 28
BS ISO 2782 .......................................................37
BS ISO 2834 .......................................................37
BS ISO 2846 .......................................................37
BS ISO 3334 .......................................................37
BS ISO 4040 .................................................20, 29
BS ISO 4141 .................................................20, 37
BS ISO 4161 .......................................................37
BS ISO 4254 .......................................................20
BS ISO 4664 .......................................................37
BS ISO 4665 .......................................................37
BS ISO 4832 .......................................................37
BS ISO 5293 .......................................................26
BS ISO 5348 .......................................................37
BS ISO 5416 .......................................................20
BS ISO/TR 5659 ...................................................37
BS ISO 5725 .......................................................37
BS ISO 5832 ...........................................20, 28, 37
BS ISO 5834 .................................................20, 21
BS ISO 6145 .......................................................20
BS ISO 6279 .................................................21, 28
BS ISO 6550 .......................................................21
BS ISO 6709 .................................................26, 28
BS ISO 6721 .......................................................37
BS ISO 7206 .................................................21, 28
BS ISO 7278 .......................................................37
BS ISO 7578 .......................................................21
BS ISO 7635 .......................................................37
BS ISO 8013 .......................................................37
BS ISO 8036 .......................................................37
BS ISO 8422 .......................................................37
BS ISO 8820 .......................................................21
BS ISO 9462 .......................................................37
BS ISO/IEC 9798 .................................................21
BS ISO 10109 .....................................................38
BS ISO 10147 .....................................................26
BS ISO 10651 .....................................................38
BS ISO 10766 .....................................................38
BS ISO 10817 .....................................................38
BS ISO 10840 .....................................................21
BS ISO 11001 .....................................................21
BS ISO 11084 .....................................................38
BS ISO 11155 .....................................................21
BS ISO 11345 .....................................................38
BS ISO 11357 ...............................................21, 38
BS ISO 11359 .....................................................38
BS ISO 11413 ...............................................21, 27
BS ISO 11414 ...............................................21, 27
BS ISO 11424 .....................................................38
BS ISO 11425 .....................................................38
BS ISO 11451 .....................................................38
BS ISO 11486 .....................................................38
BS ISO/IEC 11695 ...............................................21
BS ISO 11843 .....................................................21
BS ISO 11884 .....................................................38
BS ISO 11898 .....................................................38
BS ISO 12003 .....................................................21
BS ISO 12161 .....................................................38
BS ISO 12189 .....................................................21
BS ISO/IEC 12207 ...............................................21
Update Standards Apr 2009 Prices may be subject to change. 11
Alpha-numeric Sequence of British Standards continued...
12 Update Standards Apr 2009Prices may be subject to change.12
BRITISH STANDARDS
The following British Standardpublications are available fromBSI Customer Services (see ’How to order’on page 2).
The publications listed below are newand revised British Standards that weremade available last month.
An existing BSI publication bearing anumber identical to one announcedbelow is automatically withdrawn unlessstated otherwise.
In all other cases of supersession, detailsare given and a corresponding entryappears in the ’British Standardswithdrawn’ section.
BRITISH STANDARD IMPLEMENTATIONSWILL BE SUPPLIED IN PREFERENCE TOEUROPEAN OR INTERNATIONALSTANDARDS, UNLESS OTHERWISEREQUESTED.
Please order by the British Standardreference not the ISBN number.
BS 2000 series standards are also availablefrom:–Library of the Energy Institute61 New Cavendish StreetLondon W1G 7ARTel: 020 7467 7100Fax: 020 7255 1472Email: [email protected] this series, member pricing isapplicable to BSI and Energy Institutemembers.
BS 148:2009Reclaimed mineral insulating oil fortransformers and switchgear. Specification
supersedes BS 148:1998ISBN 978 0 580 59225 6£42.00 members, £84.00 non-members
GEL/10
BS 644:2009Timber windows. Fully finished factory-assembled windows of various types.Specification
supersedes BS 644:2003ISBN 978 0 580 56200 6£60.00 members, £120.00 non-members
B/538/1
BS 4873:2009Aluminium alloy windows and doorsets.Specification
supersedes BS 4873:2004ISBN 978 0 580 56201 3£60.00 members, £120.00 non-members
B/538/1
BS EN PUBLICATIONS
The following are British Standardimplementations of the English languageversions of European Standards (ENs).
BSI has an obligation to publish all ENsand to withdraw any conflicting BritishStandards. This has led to a series ofstandards, BS ENs, using the EN number.
Note: The date referenced in theidentifier is the date of the Europeanstandard.
BS EN ISO 105:—Textiles. Tests for colour fastness
BS EN ISO 105-E04:2009Colour fastness to perspiration
supersedes BS EN ISO 105-E04:1996ISBN 978 0 580 57879 3£34.00 members, £68.00 non-members
TCI/81
BS EN ISO 148:—Metallic materials. Charpy pendulum impacttest
BS EN ISO 148-3:2008Preparation and characterization of Charpy V-notch test pieces for indirect verification ofpendulum impact machines
partially supersedes BS EN 10045-2:1993ISBN 978 0 580 55466 7£60.00 members, £120.00 non-members
ISE/NFE/4/4
BS EN 253:2009District heating pipes. Preinsulated bonded pipesystems for directly buried hot water networks.Pipe assembly of steel service pipe,polyurethane thermal insulation and outercasing of polyethylene
supersedes BS EN 253:2003+A2:2006ISBN 978 0 580 59479 3£84.00 members, £168.00 non-members
RHE/9
BS EN 417:2003Non-refillable metallic gas cartridges forliquefied petroleum gases, with or without avalve, for use with portable appliances.Construction, inspection, testing and marking
supersedes BS EN 417:1992ISBN 978 0 580 53917 6£69.00 members, £138.00 non-members
PKW/0
BS EN 1074:—Valves for water supply. Fitness for purposerequirements and appropriate verification tests
BS EN 1074-6:2008Hydrants
supersedes BS EN 1074-6:2004ISBN 978 0 580 58744 3£60.00 members, £120.00 non-members
PSE/7/3
BS 6391:2009Specification for non-percolating layflat deliveryhoses and hose assemblies for fire fightingpurposes
supersedes BS 6391:1983ISBN 978 0 580 58518 0£60.00 members, £120.00 non-members
FSH/17/6
BS 8300:2009Design of buildings and their approaches tomeet the needs of disabled people. Code ofpractice
supersedes BS 8300:2001ISBN 978 0 580 57419 1£120.00 members, £240.00 non-members
B/559
BS 8488:—Prefabricated wiring systems intended forpermanent connection in fixed installations
BS 8488-1:2009Specification
no current standard is supersededISBN 978 0 580 56681 3£60.00 members, £120.00 non-members
PEL/23/-/11
BS 25777:2008 (Paperback)Information and communications technologycontinuity management. Code of practice
no current standard is superseded£65.00 members, £130.00 non-members
BCM/1
NA to BS EN 1993:—UK National Annex to Eurocode 3. Design ofsteel structures
NA to BS EN 1993-1-3:2006General rules. Supplementary rules for cold-formed members and sheeting
no current standard is supersededISBN 978 0 580 54962 5£34.00 members, £68.00 non-members
B/525/31
NA to BS EN 1993-1-4:2006General rules. Supplementary rules for stainlesssteels
no current standard is supersededISBN 978 0 580 54963 2£20.00 members, £40.00 non-members
B/525/31
British Standards
Please
do not send
confirmation
of
orders placed by
telephone
as it can lead to
duplication
BS EN ISO 2398:2008Rubber hoses, textile-reinforced for compressedair. Specification
supersedes BS EN ISO 2398:1997ISBN 978 0 580 57638 6£34.00 members, £68.00 non-members
PRI/66
BS EN 2542:2008Aerospace series. Steel FE-PL1502 (25CrMo4).Annealed. Bar and wire. De ≤ 40 mm. Forprevailing torque nuts
no current standard is supersededISBN 978 0 580 65821 1£34.00 members, £68.00 non-members
ACE/61/-/15
BS EN ISO 2860:2008Earth-moving machinery. Minimum accessdimensions
supersedes BS EN ISO 2860:2001ISBN 978 0 580 63415 4£34.00 members, £68.00 non-members
B/513/1
BS EN ISO 3164:2008Earth-moving machinery. Laboratoryevaluations of protective structures.Specifications for deflection-limiting volume
supersedes the dual numbered standardBS EN ISO 3164:2000, BS 6912-7:2000ISBN 978 0 580 63416 1£34.00 members, £68.00 non-members
B/513/1
BS EN ISO 3450:2008Earth-moving machinery. Braking systems ofrubber-tyred machines. Systems andperformance requirements and test procedures
supersedes BS EN ISO 3450:1996ISBN 978 0 580 63448 2£42.00 members, £84.00 non-members
B/513/1
BS EN ISO 3452:—Non-destructive testing. Penetrant testing
BS EN ISO 3452-5:2008Penetrant testing at temperatures higher than50 degrees C
no current standard is supersededISBN 978 0 580 57159 6£34.00 members, £68.00 non-members
WEE/46
BS EN ISO 3452-6:2008Penetrant testing at temperatures lower than10 degrees C
no current standard is supersededISBN 978 0 580 57160 2£34.00 members, £68.00 non-members
WEE/46
BS EN 1509:2008Playing field equipment. Badminton equipment.Functional and safety requirements, testmethods
supersedes BS EN 1509:2004ISBN 978 0 580 58439 8£34.00 members, £68.00 non-members
SW/136
BS EN 1594:2009Gas supply systems. Pipelines for maximumoperating pressure over 16 bar. Functionalrequirements
supersedes BS EN 1594:2000ISBN 978 0 580 62947 1£90.00 members, £180.00 non-members
GSE/33
BS EN 1626:2008Cryogenic vessels. Valves for cryogenic service
supersedes BS EN 1626:1999ISBN 978 0 580 58010 9£42.00 members, £84.00 non-members
PVE/18
BS EN 1736:2008Refrigerating systems and heat pumps. Flexiblepipe elements, vibration isolators, expansionjoints and non-metallic tubes. Requirements,design and installation
supersedes BS EN 1736:2000ISBN 978 0 580 61493 4£42.00 members, £84.00 non-members
RHE/18
BS EN ISO 1924:—Paper and board. Determination of tensileproperties
BS EN ISO 1924-2:2008Constant rate of elongation method (20 mm/min)
supersedes BS EN ISO 1924-2:1995ISBN 978 0 580 58756 6£42.00 members, £84.00 non-members
PAI/11
BS EN 2002:—Aerospace series. Test methods for metallicmaterials
BS EN 2002-005:2007Uninterrupted creep and stress-rupture testing
supersedes BS 4A 4-1.3:1967ISBN 978 0 580 58677 4£60.00 members, £120.00 non-members
ACE/61/-/6
BS EN ISO 2082:2008Metallic coatings. Electroplated coatings ofcadmium with supplementary treatments oniron or steel
supersedes BS EN 12330:2000ISBN 978 0 580 54193 3£60.00 members, £120.00 non-members
STI/33
BS EN 1093:—Safety of machinery. Evaluation of the emissionof airborne hazardous substances
BS EN 1093-1:2008Selection of test methods
supersedes BS EN 1093-1:1999ISBN 978 0 580 58926 3£42.00 members, £84.00 non-members
MCE/3
BS EN ISO 1179:—Connections for general use and fluid power.Ports and stud ends with ISO 228-1 threads withelastomeric or metal-to-metal sealing
BS EN ISO 1179-1:2008Threaded ports
supersedes BS 5380:1984ISBN 978 0 580 55520 6£34.00 members, £68.00 non-members
MCE/18/-/4
BS EN ISO 1179-2:2008Heavy-duty (S series) and light-duty (L series)stud ends with elastomeric sealing (type E)
supersedes BS 5380:1984ISBN 978 0 580 55521 3£42.00 members, £84.00 non-members
MCE/18/-/4
BS EN ISO 1179-3:2008Light-duty (L series) stud ends with sealing byO-ring with retaining ring (types G and H)
supersedes BS 5380:1984ISBN 978 0 580 55547 3£60.00 members, £120.00 non-members
MCE/18/-/4
BS EN ISO 1179-4:2008Stud ends for general use only with metal-to-metal sealing (type B)
supersedes BS 5380:1984ISBN 978 0 580 55548 0£42.00 members, £84.00 non-members
MCE/18/-/4
BS EN 1434:—Heat Meters
BS EN 1434-3:2008Data exchange and interfaces
supersedes BS EN 1434-3:1997ISBN 978 0 580 63495 6£69.00 members, £138.00 non-members
PEL/894
BS EN 1501:—Refuse collection vehicles and their associatedlifting devices. General requirements and safetyrequirements
BS EN 1501-3:2008Front loaded refuse collection vehicles
no current standard is supersededISBN 978 0 580 54294 7£84.00 members, £168.00 non-members
B/508/1
BS EN Publications continued...
14 Update Standards Apr 2009Prices may be subject to change.
BS EN ISO 11554:2008Optics and photonics. Lasers and laser-relatedequipment. Test methods for laser beam power,energy and temporal characteristics
supersedes BS EN ISO 11554:2006ISBN 978 0 580 62193 2£60.00 members, £120.00 non-members
CPW/172/9
BS EN ISO 11612:2008Protective clothing. Clothing to protect againstheat and flame
supersedes BS EN 531:1995ISBN 978 0 580 54185 8£69.00 members, £138.00 non-members
PH/3/2
BS EN ISO 11979:—Ophthalmic implants. Intraocular lenses
BS EN ISO 11979-4:2008Labelling and information
supersedes BS EN ISO 11979-4:2000ISBN 978 0 580 59970 5£34.00 members, £68.00 non-members
CH/172/7
BS EN 12245:2009Transportable gas cylinders. Fully wrappedcomposite cylinders
supersedes BS EN 12245:2002ISBN 978 0 580 58743 6£84.00 members, £168.00 non-members
PVE/3/3
BS EN 13120:2009Internal blinds. Performance requirementsincluding safety
supersedes BS EN 13120:2004ISBN 978 0 580 57705 5£69.00 members, £138.00 non-members
B/538/3
BS EN 13245:—Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications
BS EN 13245-2:2008PVC-U profiles and PVC-UE profiles for internaland external wall and ceiling finishes
no current standard is supersededISBN 978 0 580 54318 0£69.00 members, £138.00 non-members
PRI/82
BS EN 13463:—Non-electrical equipment for use in potentiallyexplosive atmospheres
BS EN 13463-1:2009Basic method and requirements
supersedes BS EN 13463-1:2001ISBN 978 0 580 58230 1£90.00 members, £180.00 non-members
FSH/23
BS EN ISO 7263:2008Corrugating medium. Determination of the flatcrush resistance after laboratory fluting
supersedes BS EN ISO 7263:1995ISBN 978 0 580 58857 0£42.00 members, £84.00 non-members
PAI/11
BS EN ISO 7590:2009Steel cord conveyor belts. Methods for thedetermination of total thickness and coverthickness
supersedes BS EN ISO 7590:2001ISBN 978 0 580 57875 5£34.00 members, £68.00 non-members
PRI/67
BS EN ISO 9073:—Textiles. Test methods for nonwovens
BS EN ISO 9073-16:2008Determination of resistance to penetration bywater (hydrostatic pressure)
no current standard is supersededISBN 978 0 580 56795 7£34.00 members, £68.00 non-members
TCI/24
BS EN ISO 10211:2007Thermal bridges in building construction. Heatflows and surface temperatures. Detailedcalculations
supersedes BS EN ISO 10211-1:1996 andBS EN ISO 10211-2:2001ISBN 978 0 580 64346 0£84.00 members, £168.00 non-members
B/540
BS EN ISO 10524:—Pressure regulators for use with medical gases
BS EN ISO 10524-4:2008Low-pressure regulators
supersedes BS EN 738-4:1999ISBN 978 0 580 65929 4£69.00 members, £138.00 non-members
CH/121/6
BS EN ISO 11064:—Ergonomic design of control centres
BS EN ISO 11064-5:2008Displays and controls
no current standard is supersededISBN 978 0 580 57609 6£84.00 members, £168.00 non-members
PH/9
BS EN ISO 11252:2008Lasers and laser-related equipment. Laserdevice. Minimum requirements fordocumentation
supersedes BS EN ISO 11252:2004ISBN 978 0 580 62192 5£42.00 members, £84.00 non-members
CPW/172/9
BS EN 3631:2008Aerospace series. Fluid fittings, flanged, 90°elbowed. Sealing by O-ring for 0,8 mm thicktubes
no current standard is supersededISBN 978 0 580 60171 2£42.00 members, £84.00 non-members
ACE/12
BS EN 3660:—Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors
BS EN 3660-023:2008Cable outlet, style A, 90°, composite, unsealed,with cable tie strain relief. Product standard
no current standard is supersededISBN 978 0 580 60582 6£34.00 members, £68.00 non-members
ACE/6
BS EN 3672:2008Aerospace series. Shank nuts, self-locking, inheat resisting nickel base alloy NI-P101HT(Waspaloy), silver plated, for 30° swage.Classification: 1210 MPa (at ambienttemperature)/730°C
no current standard is supersededISBN 978 0 580 64309 5£34.00 members, £68.00 non-members
ACE/12
BS EN ISO 3861:2008Rubber hoses for sand and grit blasting.Specification
supersedes BS EN ISO 3861:1997ISBN 978 0 580 57641 6£34.00 members, £68.00 non-members
PRI/66
BS EN ISO 4641:2008Rubber hoses and hose assemblies for watersuction and discharge. Specification
supersedes BS EN 24641:1993ISBN 978 0 580 54300 5£42.00 members, £84.00 non-members
PRI/66
BS EN ISO 5398:—Leather. Chemical determination of chromicoxide content
BS EN ISO 5398-2:2009Quantification by colorimetric determination
no current standard is supersededISBN 978 0 580 55575 6£42.00 members, £84.00 non-members
TCI/69
BS EN ISO 6682:2008Earth-moving machinery. Zones of comfort andreach for controls
supersedes BS EN ISO 6682:1995ISBN 978 0 580 63418 5£42.00 members, £84.00 non-members
B/513/1
Update Standards Apr 2009 Prices may be subject to change. 15
BS EN 15427:2008Railway applications. Wheel/rail frictionmanagement. Flange lubrication
no current standard is supersededISBN 978 0 580 55181 9£60.00 members, £120.00 non-members
RAE/3/-/6
BS EN 15436:—Road service area maintenance equipment
BS EN 15436-1:2008Terminology
no current standard is supersededISBN 978 0 580 56221 1£90.00 members, £180.00 non-members
B/513
BS EN 15475:2009Fertilizers. Determination of ammoniacalnitrogen
supersedes DD CEN/TS 15475:2006ISBN 978 0 580 62381 3£42.00 members, £84.00 non-members
CII/37
BS EN 15476:2009Fertilizers. Determination of nitric andammoniacal nitrogen according to Devarda
supersedes DD CEN/TS 15476:2006ISBN 978 0 580 62382 0£42.00 members, £84.00 non-members
CII/37
BS EN 15477:2009Fertilizers. Determination of the water-solublepotassium content
supersedes DD CEN/TS 15477:2006ISBN 978 0 580 62383 7£34.00 members, £68.00 non-members
CII/37
BS EN 15478:2009Fertilizers. Determination of total nitrogen inurea
supersedes DD CEN/TS 15478:2006ISBN 978 0 580 62384 4£42.00 members, £84.00 non-members
CII/37
BS EN 15479:2009Fertilizers. Spectrophotometric determinationof biuret in urea
supersedes DD CEN/TS 15479:2006ISBN 978 0 580 62385 1£34.00 members, £68.00 non-members
CII/37
BS EN ISO 15536:—Ergonomics. Computer manikins and bodytemplates
BS EN ISO 15536-1:2008General requirements
supersedes BS EN ISO 15536-1:2005ISBN 978 0 580 65125 0£60.00 members, £120.00 non-members
PH/9/4
BS EN ISO 13906:2008Animal feeding stuffs. Determination of aciddetergent fibre (ADF) and acid detergent lignin(ADL) contents
no current standard is supersededISBN 978 0 580 67112 8£60.00 members, £120.00 non-members
AW/10
BS EN 14033:—Railway applications. Track. Railboundconstruction and maintenance machines
BS EN 14033-1:2008Technical requirements for running
no current standard is supersededISBN 978 0 580 53049 4£90.00 members, £180.00 non-members
RAE/2
BS EN 14286:2008Aluminium and aluminium alloys. Weldablerolled products for tanks for the storage andtransportation of dangerous goods
supersedes BS EN 14286:2007ISBN 978 0 580 60971 8£42.00 members, £84.00 non-members
NFE/35/5
BS EN ISO 14691:2008Petroleum, petrochemical and natural gasindustries. Flexible couplings for mechanicalpower transmission. General purposeapplications
supersedes BS EN ISO 14691:2000ISBN 978 0 580 58659 0£69.00 members, £138.00 non-members
PSE/17/-/6
BS EN ISO 14738:2008Safety of machinery. Anthropometricrequirements for the design of workstations atmachinery
supersedes BS EN ISO 14738:2002ISBN 978 0 580 65130 4£69.00 members, £138.00 non-members
PH/9/4
BS EN 15199:—Petroleum products. Determination of boilingrange distribution by gas chromatographymethod
BS EN 15199-3:2008Crude oil
no current standard is supersededISBN 978 0 580 57252 4£60.00 members, £120.00 non-members
PTI/13
BS EN 15227:2008Railway applications. Crashworthinessrequirements for railway vehicle bodies
no current standard is supersededISBN 978 0 580 55398 1£69.00 members, £138.00 non-members
RAE/1/-/2
BS EN ISO 13500:2008Petroleum and natural gas industries. Drillingfluid materials. Specifications and tests
supersedes BS EN ISO 13500:2006ISBN 978 0 580 59536 3£95.00 members, £190.00 non-members
PSE/17/-/3
BS EN 13598:—Plastics piping systems for non-pressureunderground drainage and sewerage.Unplasticized poly(vinyl chloride) (PVC-U),polypropylene (PP) and polyethylene (PE)
BS EN 13598-2:2009Specifications for manholes and inspectionchambers in traffic areas and deepunderground installations
partially supersedes BS 7158:2001ISBN 978 0 580 54765 2£60.00 members, £120.00 non-members
PRI/88/1
BS EN 13648:—Cryogenic vessels. Safety devices for protectionagainst excessive pressure
BS EN 13648-1:2008Safety valves for cryogenic service
supersedes BS EN 13648-1:2002ISBN 978 0 580 58011 6£42.00 members, £84.00 non-members
PVE/18
BS EN ISO 13680:2008Petroleum and natural gas industries.Corrosion-resistant alloy seamless tubes for useas casing, tubing and coupling stock. Technicaldelivery conditions
supersedes BS EN ISO 13680:2001ISBN 978 0 580 58131 1£90.00 members, £180.00 non-members
PSE/17/-/5
BS EN ISO 13732:—Ergonomics of the thermal environment.Methods for the assessment of humanresponses to contact with surfaces
BS EN ISO 13732-3:2008Cold surfaces
supersedes BS EN ISO 13732-3:2005ISBN 978 0 580 65128 1£60.00 members, £120.00 non-members
PH/9/1
BS EN ISO 13736:2008Determination of flash point. Abel closed-cupmethod
supersedes the dual numbered standardBS EN ISO 13736:1998, BS 2000-170:1998ISBN 978 0 580 55723 1£60.00 members, £120.00 non-members
PTI/13
BS EN Publications continued...
16 Update Standards Apr 2009Prices may be subject to change.
BS EN 41003:2009Particular safety requirements for equipment tobe connected to telecommunication networksand/or a cable distribution system
supersedes BS EN 41003:1999 which remainscurrentISBN 978 0 580 61043 1£42.00 members, £84.00 non-members
EPL/108
BS EN 50164:—Lightning protection components (LPC)
BS EN 50164-5:2009Requirements for earth electrode inspectionhousings and earth electrode seals
no current standard is supersededISBN 978 0 580 63646 2£34.00 members, £68.00 non-members
GEL/81
BS EN 50164-6:2009Requirements for lightning strike counters
no current standard is supersededISBN 978 0 580 62737 8£42.00 members, £84.00 non-members
GEL/81
BS EN 50342:—Lead-acid starter batteries
BS EN 50342-3:2008Terminal system for batteries with 36 V nominalvoltage
no current standard is supersededISBN 978 0 580 65470 1£34.00 members, £68.00 non-members
PEL/21
BS EN 50413:2009Basic standard on measurement and calculationprocedures for human exposure to electric,magnetic and electromagnetic fields (0 Hz – 300 GHz)
no current standard is supersededISBN 978 0 580 53525 3£84.00 members, £168.00 non-members
GEL/106
BS EN 50483:—Test requirements for low voltage aerialbundled cable accessories
BS EN 50483-1:2009Generalities
no current standard is supersededISBN 978 0 580 56177 1£60.00 members, £120.00 non-members
GEL/20/11
BS EN 50483-2:2009Tension and suspension clamps for selfsupporting system
no current standard is supersededISBN 978 0 580 56178 8£60.00 members, £120.00 non-members
GEL/20/11
BS EN 15698:—District heating pipes. Preinsulated bonded twinpipe systems for directly buried hot waternetworks
BS EN 15698-1:2009Twin pipe assembly of steel service pipe,polyurethane thermal insulation and outercasing of polyethylene
no current standard is supersededISBN 978 0 580 58925 6£42.00 members, £84.00 non-members
RHE/9
BS EN ISO 17232:2009Leather. Physical and mechanical tests.Determination of heat resistance of patentleather
supersedes BS EN 13540:2002ISBN 978 0 580 66887 6£34.00 members, £68.00 non-members
TCI/69
BS EN ISO 22288:2009Leather. Physical and mechanical tests.Determination of flex resistance by the vampflex method
supersedes BS EN 13335:2002ISBN 978 0 580 66888 3£34.00 members, £68.00 non-members
TCI/69
BS EN ISO 22854:2008Liquid petroleum products. Determination ofhydrocarbon types and oxygenates inautomotive-motor gasoline. Multidimensionalgas chromatography method
supersedes the dual numbered standardBS EN 14517:2004, BS 2000-526:2004ISBN 978 0 580 56902 9£60.00 members, £120.00 non-members
PTI/13
BS EN ISO 25457:2008Petroleum, petrochemical and natural gasindustries. Flare details for general refinery andpetrochemical service
no current standard is supersededISBN 978 0 580 55996 9£103.00 members, £206.00 non-members
PSE/17/-/6
BS EN ISO 28941:—Plastics. Poly(phenylene ether) (PPE) mouldingand extrusion materials
BS EN ISO 28941-1:2008Designation system and basis for specifications
supersedes BS EN ISO 15103-1:2004ISBN 978 0 580 58541 8£42.00 members, £84.00 non-members
PRI/82
BS EN 15558:2009Fertilizers. Determination of nitric andammoniacal nitrogen according to Ulsch
supersedes DD CEN/TS 15558:2007ISBN 978 0 580 62386 8£42.00 members, £84.00 non-members
CII/37
BS EN 15573:2008Earth-moving machinery. Design requirementsfor circulation on the road
no current standard is supersededISBN 978 0 580 57726 0£69.00 members, £138.00 non-members
B/513/1
BS EN 15585:2008Cereals and cereal products. Durum wheat (T. durum Desf.). Determination of percentageof mitadine grains and calculation ofpercentage of vitreous grains
no current standard is supersededISBN 978 0 580 57710 9£34.00 members, £68.00 non-members
AW/4
BS EN 15609:2008LPG equipment and accessories. LPG propulsionsystems for boats, yachts and other craft.Installation requirements
no current standard is supersededISBN 978 0 580 54806 2£69.00 members, £138.00 non-members
PVE/19
BS EN 15632:—District heating pipes. Pre-insulated flexiblepipe systems
BS EN 15632-1:2009Classification, general requirements and testmethods
no current standard is supersededISBN 978 0 580 58236 3£60.00 members, £120.00 non-members
RHE/9
BS EN 15632-4:2009Bonded system with metal service pipes;requirements and test methods
no current standard is supersededISBN 978 0 580 58239 4£34.00 members, £68.00 non-members
RHE/9
BS EN 15647:2009Surface active agents. Determination of thedispersing effect of surfactants on powder
no current standard is supersededISBN 978 0 580 58331 5£34.00 members, £68.00 non-members
CII/34
Update Standards Apr 2009 Prices may be subject to change. 17
BS EN 60384-20:2008Sectional specification. Fixed metallizedpolyphenylene sulfide film dielectric surfacemount D.C. capacitors
supersedes BS EN 60384-20:1999ISBN 978 0 580 57372 9£60.00 members, £120.00 non-members
EPL/40X
BS EN 60512:—Connectors for electronic equipment. Tests andmeasurements
BS EN 60512-25-9:2008Signal integrity tests. Test 25i. Alien crosstalk
no current standard is supersededISBN 978 0 580 55641 8£42.00 members, £84.00 non-members
EPL/48
BS EN 60519:—Safety in electroheat installations
BS EN 60519-21:2009Particular requirements for resistance heatingequipment. Heating and melting glassequipment
supersedes BS EN 60519-21:1998ISBN 978 0 580 57527 3£34.00 members, £68.00 non-members
PEL/27
BS EN 60601:—Medical electrical equipment
BS EN 60601-2-29:2008Particular requirements for the basic safety andessential performance of radiotherapysimulators
supersedes the dual numbered standardBS EN 60601-2-29:1999, BS 5724-2.129:1999ISBN 978 0 580 56319 5£60.00 members, £120.00 non-members
CH/62/3
BS EN 60601-2-39:2008Particular requirements for basic safety andessential performance of peritoneal dialysisequipment
supersedes the dual numbered standardBS EN 60601-2-39:1999, BS 5724-2.39:1999ISBN 978 0 580 56986 9£60.00 members, £120.00 non-members
CH/150/2
BS EN 60703:2009Test methods for electroheating installationswith electron guns
supersedes BS 7689:1993ISBN 978 0 580 56432 1£42.00 members, £84.00 non-members
PEL/27
BS EN 60204:—Safety of machinery. Electrical equipment ofmachines
BS EN 60204-32:2008Requirements for hoisting machines
supersedes BS EN 60204-32:1998ISBN 978 0 580 57562 4£109.00 members, £218.00 non-members
MCE/3
BS EN 60286:—Packaging of components for automatichandling
BS EN 60286-2:2009Packaging of components with unidirectionalleads on continuous tapes
supersedes BS EN 60286-2:1998ISBN 978 0 580 57713 0£69.00 members, £138.00 non-members
EPL/40X
BS EN 60297:—Mechanical structures for electronic equipment.Dimensions of mechanical structures of the482,6 mm (19 in) series
BS EN 60297-3-100:2009Basic dimensions of front panels, subracks,chassis, racks and cabinets
supersedes BS 5954-2:1985ISBN 978 0 580 58405 3£42.00 members, £84.00 non-members
EPL/48
BS EN 60297-3-105:2009Dimensions and design aspects for 1U highchassis
no current standard is supersededISBN 978 0 580 58287 5£42.00 members, £84.00 non-members
EPL/48
BS EN 60384:—Fixed capacitors for use in electronic equipment
BS EN 60384-18:2007Sectional specification. Fixed aluminiumelectrolytic surface mount capacitors with solid(Mn02) and non-solid electrolyte
no current standard is supersededISBN 978 0 580 56141 2£69.00 members, £138.00 non-members
EPL/40X
BS EN 60384-18-1:2007Blank detail specification. Fixed aluminiumelectrolytic surface mount capacitors with solid(MnO2) electrolyte. Assessment level EZ
no current standard is supersededISBN 978 0 580 56144 3£42.00 members, £84.00 non-members
EPL/40X
BS EN 50483-3:2009Tension and suspension clamps for neutralmessenger system
no current standard is supersededISBN 978 0 580 56179 5£79.00 members, £158.00 non-members
GEL/20/11
BS EN 50483-4:2009Connectors
no current standard is supersededISBN 978 0 580 56180 1£84.00 members, £168.00 non-members
GEL/20/11
BS EN 50483-5:2009Electrical ageing test
no current standard is supersededISBN 978 0 580 56181 8£69.00 members, £138.00 non-members
GEL/20/11
BS EN 50483-6:2009Environmental testing
no current standard is supersededISBN 978 0 580 56182 5£60.00 members, £120.00 non-members
GEL/20/11
BS EN 55025:2008Vehicles, boats and internal combustionengines. Radio disturbance characteristics.Limits and methods of measurement for theprotection of on-board receivers
supersedes BS EN 55025:2003 which remainscurrentISBN 978 0 580 55862 7£90.00 members, £180.00 non-members
GEL/210/11
BS EN 60027:—Letter symbols to be used in electricaltechnology
BS EN 60027-1:2006+A2:2007General
no current standard is supersededISBN 978 0 580 60194 1£90.00 members, £180.00 non-members
SS/7
BS EN 60068:—Environmental testing
BS EN 60068-2-64:2008Tests. Test Fh. Vibration, broadband randomand guidance
supersedes BS EN 60068-2-64:1995ISBN 978 0 580 55878 8£69.00 members, £138.00 non-members
GEL/104
BS EN Publications continued...
18 Update Standards Apr 2009Prices may be subject to change.
your order
BS EN 61310:—Safety of machinery. Indication, marking andactuation
BS EN 61310-1:2008Requirements for visual, acoustic and tactilesignals
supersedes BS EN 61310-1:1995ISBN 978 0 580 54537 5£60.00 members, £120.00 non-members
MCE/3
BS EN 61310-2:2008Requirements for marking
supersedes BS EN 61310-2:1995ISBN 978 0 580 54538 2£42.00 members, £84.00 non-members
MCE/3
BS EN 61310-3:2008Requirements for the location and operation ofactuators
supersedes BS EN 61310-3:1999ISBN 978 0 580 54539 9£42.00 members, £84.00 non-members
MCE/3
BS EN 61400:—Wind turbines
BS EN 61400-25-4:2008Communications for monitoring and control ofwind power plants. Mapping to communicationprofile
no current standard is supersededISBN 978 0 580 55687 6£130.00 members, £260.00 non-members
PEL/88
BS EN 61649:2008Weibull analysis
supersedes BS IEC 61649:1997ISBN 978 0 580 54368 5£90.00 members, £180.00 non-members
DS/1/1
BS EN 61753:—Fibre optic interconnecting devices and passivecomponents performance standard
BS EN 61753-101-3:2009Fibre management systems for Category U.Uncontrolled environment
no current standard is supersededISBN 978 0 580 55652 4£84.00 members, £168.00 non-members
GEL/86/2
BS EN 62024:—High frequency inductive components. Electricalcharacteristics and measuring methods
BS EN 62024-2:2009Rated current of inductors for DC to DCconverters
no current standard is supersededISBN 978 0 580 57267 8£42.00 members, £84.00 non-members
EPL/51
BS EN 61158:—Industrial communication networks. Fieldbusspecifications
BS EN 61158-3-12:2008Data-link layer service definition. Type 12elements
supersedes BS EN 61158-3:2004 which remainscurrentISBN 978 0 580 61567 2£79.00 members, £158.00 non-members
AMT/7
BS EN 61189:—Test methods for electrical materials,interconnection structures and assemblies
BS EN 61189-5:2006Test methods for printed board assemblies
no current standard is supersededISBN 978 0 580 53522 2£84.00 members, £168.00 non-members
EPL/501
BS EN 61290:—Optical amplifiers. Test methods
BS EN 61290-3:2008Noise figure parameters
supersedes BS EN 61290-3:2000ISBN 978 0 580 58630 9£42.00 members, £84.00 non-members
GEL/86/3
BS EN 61290-3-2:2008Noise figure parameters. Electrical spectrumanalyzer method
supersedes BS EN 61290-3-2:2003ISBN 978 0 580 62671 5£42.00 members, £84.00 non-members
GEL/86/3
BS EN 61290-10-2:2008Multichannel parameters. Pulse method using agated optical spectrum analyzer
supersedes BS EN 61290-10-2:2003ISBN 978 0 580 57784 0£42.00 members, £84.00 non-members
GEL/86/3
BS EN 61291:—Optical amplifiers
BS EN 61291-4:2008Multichannel applications. Performancespecification template
supersedes BS EN 61291-4:2003ISBN 978 0 580 59665 0£42.00 members, £84.00 non-members
GEL/86/3
BS EN 61300:—Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures
BS EN 61300-2-44:2008Tests. Flexing of the strain relief of fibre opticdevices
supersedes BS EN 61300-2-44:2005ISBN 978 0 580 59020 7£34.00 members, £68.00 non-members
GEL/86/2
BS EN 60730:—Automatic electrical controls for household andsimilar use
BS EN 60730-2-3:2007Particular requirements for thermal protectorsfor ballasts for tubular fluorescent lamps
supersedes BS EN 60730-2-3:1992 which remainscurrentISBN 978 0 580 53782 0£42.00 members, £84.00 non-members
CPL/72
BS EN 60758:2009Synthetic quartz crystal. Specifications andguidelines for use
supersedes BS EN 60758:2005ISBN 978 0 580 58322 3£84.00 members, £168.00 non-members
EPL/49
BS EN 60793:—Optical fibres
BS EN 60793-2-60:2008Product specifications. Sectional specificationfor category C single-mode intraconnectionfibres
no current standard is supersededISBN 978 0 580 58682 8£60.00 members, £120.00 non-members
GEL/86/1
BS EN 60974:—Arc welding equipment
BS EN 60974-2:2008Liquid cooling systems
supersedes BS EN 60974-2:2003ISBN 978 0 580 56863 3£42.00 members, £84.00 non-members
WEE/6
BS EN 60974-5:2008Wire feeders
supersedes BS EN 60974-5:2002ISBN 978 0 580 56864 0£60.00 members, £120.00 non-members
WEE/6
BS EN 61076:—Connectors for electronic equipment. Productrequirements
BS EN 61076-3:2008Rectangular connectors. Sectional specification
supersedes BS EN 61076-3:2000ISBN 978 0 580 53939 8£42.00 members, £84.00 non-members
EPL/48
BS EN 61076-3-001:2008Rectangular connectors. Blank detailspecification
supersedes BS EN 61076-3-001:2000ISBN 978 0 580 53940 4£90.00 members, £180.00 non-members
EPL/48
Update Standards Apr 2009 Prices may be subject to change. 19
BS ISO 4040:2009Road vehicles. Location of hand controls,indicators and tell-tales in motor vehicles
supersedes BS AU 199a:1997ISBN 978 0 580 59898 2£42.00 members, £84.00 non-members
AUE/12
BS ISO 4141:—Road vehicles. Multi-core connecting cables
BS ISO 4141-4:2009Test methods and requirements for coiled cableassemblies
no current standard is supersededISBN 978 0 580 56889 3£42.00 members, £84.00 non-members
AUE/16
BS ISO 4254:—Agricultural machinery. Safety
BS ISO 4254-9:2008Seed drills
no current standard is supersededISBN 978 0 580 57557 0£60.00 members, £120.00 non-members
AGE/32
BS ISO 5416:2006Direct reduced iron. Determination of metalliciron. Bromine-methanol titrimetric method
supersedes BS ISO 5416:1997ISBN 978 0 580 54376 0£42.00 members, £84.00 non-members
ISE/58
BS ISO 5832:—Implants for surgery. Metallic materials
BS ISO 5832-5:2005Wrought cobalt-chromium-tungsten-nickel alloy
supersedes BS 7252-5:1994ISBN 978 0 580 53908 4£34.00 members, £68.00 non-members
CH/150/1
BS ISO 5832-9:2007Wrought high nitrogen stainless steel
supersedes BS 7252-9:1993ISBN 978 0 580 54024 0£34.00 members, £68.00 non-members
CH/150/1
BS ISO 5834:—Implants for surgery. Ultra-high-molecular-weight polyethylene
BS ISO 5834-2:2006Moulded forms
supersedes BS ISO 5834-2:1998ISBN 978 0 580 53154 5£34.00 members, £68.00 non-members
CH/150/1
BS IMPLEMENTATIONS
BS Implementations comprise the ISO orIEC text without any national deviationand with front and back cover indicatingthe UK committee responsible.No other information will normally beadded.
Note: The date referenced in theidentifier is the date of the internationalstandard.
BS ISO 730:2009Agricultural wheeled tractors. Rear-mountedthree-point linkage. Categories 1N, 1, 2N, 2, 3N,3, 4N and 4
supersedes BS 1841-1:1996ISBN 978 0 580 56215 0£60.00 members, £120.00 non-members
AGE/6
BS ISO 812:2006Rubber, vulcanized or thermoplastic.Determination of low-temperature brittleness
supersedes BS 903-A25:1992ISBN 978 0 580 55322 6£42.00 members, £84.00 non-members
PRI/22
BS ISO 815:—Rubber, vulcanized or thermoplastic.Determination of compression set
BS ISO 815-2:2008At low temperatures
supersedes BS 903-A6:1992ISBN 978 0 580 55975 4£42.00 members, £84.00 non-members
PRI/22
BS ISO 817:2005Refrigerants. Designation system
no current standard is supersededISBN 978 0 580 54082 0£42.00 members, £84.00 non-members
RHE/18
BS ISO 1382:2008Rubber. Vocabulary
supersedes BS ISO 1382:2002ISBN 978 0 580 56921 0£90.00 members, £180.00 non-members
PRI/10
BS ISO 2332:2009Agricultural tractors and machinery. Connectionof implements via three-point linkage.Clearance zone around implement
supersedes BS 6509:1984ISBN 978 0 580 56216 7£42.00 members, £84.00 non-members
AGE/6
BS EN 62271:—High-voltage switchgear and controlgear
BS EN 62271-1:2008Common specifications
supersedes BS EN 60694:1997 which remainscurrentISBN 978 0 580 54336 4£109.00 members, £218.00 non-members
PEL/17/1
BS EN 62431:2008Reflectivity of electromagnetic wave absorbersin millimetre wave frequency. Measurementmethods
supersedes DD IEC/PAS 62431:2005ISBN 978 0 580 58258 5£84.00 members, £168.00 non-members
EPL/46/2
BS ENs IMPLEMENTED BYAMENDMENT
For the standards listed below see alsothe ’Amendments to British Standards’and ’Updated British Standards’ sectionsof this issue of Update Standards.
BS EN ISO 6145:—Gas analysis. Preparation of calibration gasmixtures using dynamic volumetric methods
BS EN ISO 6145-1:2008Methods of calibration
PTI/15
Implementation of European Standard EN ISO 6145-1 by amendment to BS ISO 6145-1:2003.
BS EN ISO 6145-4:2008Continuous syringe injection method
PTI/15
Implementation of European Standard EN ISO 6145-4by amendment to BS ISO 6145-4:2004.
BS EN ISO 6145-6:2008Critical orifices
PTI/15
Implementation of European Standard EN ISO 6145-6by amendment to BS ISO 6145-6:2003.
BS EN ISO 6145-8:2008Diffusion method
PTI/15
Implementation of European Standard EN ISO 6145-8by amendment to BS ISO 6145-8:2005.
BS EN ISO 6145-10:2008Permeation method
PTI/15
Implementation of European Standard EN ISO 6145-10by amendment to BS ISO 6145-10:2002.
BS EN Publications continued...
20 Update Standards Apr 2009Prices may be subject to change.
BS ISO 11843:—Capability of detection
BS ISO 11843-5:2008Methodology in the linear and non-linearcalibration cases
no current standard is supersededISBN 978 0 580 56861 9£60.00 members, £120.00 non-members
SS/6
BS ISO 12003:—Agricultural and forestry tractors. Roll-overprotective structures on narrow-track wheeledtractors
BS ISO 12003-1:2008Front-mounted ROPS
supersedes BS ISO 12003-1:2002ISBN 978 0 580 57031 5£84.00 members, £168.00 non-members
AGE/6
BS ISO 12189:2008Implants for surgery. Mechanical testing ofimplantable spinal devices. Fatigue test methodfor spinal implant assemblies using an anteriorsupport
no current standard is supersededISBN 978 0 580 63685 1£42.00 members, £84.00 non-members
CH/150/5
BS ISO/IEC 12207:2008Systems and software engineering. Softwarelife cycle processes
supersedes BS ISO/IEC 12207:1995ISBN 978 0 580 58203 5£109.00 members, £218.00 non-members
IST/15
BS ISO 13356:2008Implants for surgery. Ceramic materials basedon yttria-stabilized tetragonal zirconia (Y-TZP)
supersedes BS 7253-6:1997ISBN 978 0 580 54087 5£60.00 members, £120.00 non-members
CH/150/1
BS ISO 14703:2008Fine ceramics (advanced ceramics, advancedtechnical ceramics). Sample preparation for thedetermination of particle size distribution ofceramic powders
no current standard is supersededISBN 978 0 580 65412 1£34.00 members, £68.00 non-members
RPI/13
BS ISO 14726:2008Ships and marine technology. Identificationcolours for the content of piping systems
supersedes BS EN ISO 14726-1:2002ISBN 978 0 580 65543 2£42.00 members, £84.00 non-members
SME/32/-/3
BS ISO 10840:2008Plastics. Guidance for the use of standard firetests
supersedes BS ISO 10840:2003ISBN 978 0 580 57108 4£69.00 members, £138.00 non-members
PRI/26
BS ISO 11001:—Agricultural wheeled tractors and implements.Three-point hitch couplers
BS ISO 11001-3:2009Link coupler
no current standard is supersededISBN 978 0 580 56217 4£34.00 members, £68.00 non-members
AGE/6
BS ISO 11155:—Road vehicles. Air filters for passengercompartments
BS ISO 11155-2:2009Test for gaseous filtration
supersedes DD ISO/TS 11155-2:2002ISBN 978 0 580 59292 8£60.00 members, £120.00 non-members
MCE/21/2
BS ISO 11357:—Plastics. Differential scanning calorimetry (DSC)
BS ISO 11357-6:2008Determination of oxidation induction time(isothermal OIT) and oxidation inductiontemperature (dynamic OIT)
supersedes BS ISO 11357-6:2002ISBN 978 0 580 58342 1£60.00 members, £120.00 non-members
PRI/21
BS ISO 11413:2008Plastics pipes and fittings. Preparation of testpiece assemblies between a polyethylene (PE)pipe and an electrofusion fitting
supersedes BS 2782-11:Method 1150E:1997ISBN 978 0 580 60135 4£42.00 members, £84.00 non-members
PRI/88/4
BS ISO 11414:2009Plastics pipes and fittings. Preparation ofpolyethylene (PE) pipe/pipe or pipe/fitting testpiece assemblies by butt fusion
supersedes BS 2782-11:Method 1150B:1998ISBN 978 0 580 60187 3£42.00 members, £84.00 non-members
PRI/88/4
BS ISO/IEC 11695:—Identification cards. Optical memory cards.Holographic recording method
BS ISO/IEC 11695-1:2008Physical characteristics
no current standard is supersededISBN 978 0 580 61522 1£42.00 members, £84.00 non-members
IST/17
BS ISO 5834-3:2005Accelerated ageing methods
no current standard is supersededISBN 978 0 580 59087 0£34.00 members, £68.00 non-members
CH/150/1
BS ISO 6279:2006Plain bearings. Aluminium alloys for solidbearings
supersedes BS 5812-1:1979ISBN 978 0 580 54667 9£34.00 members, £68.00 non-members
MCE/12
BS ISO 6550:—Road vehicles. Sheath-type glow-plugs withconical seating and their cylinder head housing
BS ISO 6550-3:2009M10 glow-plugs
supersedes BS ISO 6550-3:2002ISBN 978 0 580 55287 8£42.00 members, £84.00 non-members
MCE/9
BS ISO 7206:—Implants for surgery. Partial and total hip jointprostheses
BS ISO 7206-1:2008Classification and designation of dimensions
supersedes BS 7251-3:1997ISBN 978 0 580 53800 1£60.00 members, £120.00 non-members
CH/150/4
BS ISO 7578:2008Road vehicles. Sheath-type glow-plugs. Generalrequirements and test methods
no current standard is supersededISBN 978 0 580 60846 9£34.00 members, £68.00 non-members
MCE/9
BS ISO 8820:—Road vehicles. Fuse-links
BS ISO 8820-1:2008Definitions and general test requirements
no current standard is supersededISBN 978 0 580 57698 0£42.00 members, £84.00 non-members
AUE/16
BS ISO/IEC 9798:—Information technology. Security techniques.Entity authentication
BS ISO/IEC 9798-2:2008Mechanisms using symmetric enciphermentalgorithms
supersedes BS ISO/IEC 9798-2:1999ISBN 978 0 580 60819 3£60.00 members, £120.00 non-members
IST/33
Update Standards Apr 2009 Prices may be subject to change. 21
BS ISO 17572:—Intelligent transport systems (ITS). Locationreferencing for geographic databases
BS ISO 17572-1:2008General requirements and conceptual model
no current standard is supersededISBN 978 0 580 57937 0£84.00 members, £168.00 non-members
EPL/278
BS ISO 17572-2:2008Pre-coded location references (pre-codedprofile)
no current standard is supersededISBN 978 0 580 57938 7£69.00 members, £138.00 non-members
EPL/278
BS ISO 17572-3:2008Dynamic location references (dynamic profile)
no current standard is supersededISBN 978 0 580 57939 4£90.00 members, £180.00 non-members
EPL/278
BS ISO 18192:—Implants for surgery. Wear of totalintervertebral spinal disc prostheses
BS ISO 18192-1:2008Loading and displacement parameters for weartesting and corresponding environmentalconditions for test
no current standard is supersededISBN 978 0 580 56845 9£69.00 members, £138.00 non-members
CH/150/5
BS ISO 19003:2006Rubber and rubber products. Guidance on theapplication of statistics to physical testing
supersedes BS 903-2:1997ISBN 978 0 580 54170 4£109.00 members, £218.00 non-members
PRI/22
BS ISO 19712:—Plastics. Decorative solid surfacing materials
BS ISO 19712-1:2008Classification and specifications
no current standard is supersededISBN 978 0 580 55663 0£42.00 members, £84.00 non-members
PRI/76
BS ISO/IEC 19757:—Information technology. Document SchemaDefinition Language (DSDL)
BS ISO/IEC 19757-2:2008Regular-grammer-based validation. RELAX NG
supersedes BS ISO/IEC 19757-2:2003ISBN 978 0 580 60731 8£84.00 members, £168.00 non-members
IST/41
BS ISO 15726:2009Metallic coatings and other inorganic coatings.Electrodeposited zinc alloys with nickel, cobaltor iron
no current standard is supersededISBN 978 0 580 60525 3£60.00 members, £120.00 non-members
STI/33
BS ISO/IEC 15946:—Information technology. Security techniques.Cryptographic techniques based on ellipticcurves
BS ISO/IEC 15946-1:2008General
supersedes BS ISO/IEC 15946-1:2002ISBN 978 0 580 55504 6£69.00 members, £138.00 non-members
IST/33
BS ISO 16000:—Indoor air
BS ISO 16000-16:2008Detection and enumeration of moulds.Sampling by filtration
no current standard is supersededISBN 978 0 580 56566 3£60.00 members, £120.00 non-members
EH/2/3
BS ISO 16000-17:2008Detection and enumeration of moulds. Culture-based method
no current standard is supersededISBN 978 0 580 56567 0£60.00 members, £120.00 non-members
EH/2/3
BS ISO 16111:2008Transportable gas storage devices. Hydrogenabsorbed in reversible metal hydride
no current standard is supersededISBN 978 0 580 65519 7£79.00 members, £158.00 non-members
PVE/3/8
BS ISO 16402:2008Implants for surgery. Acrylic resin cement.Flexural fatigue testing of acrylic resin cementsused in orthopaedics
no current standard is supersededISBN 978 0 580 60521 5£42.00 members, £84.00 non-members
CH/150/1
BS ISO 16454:2007Space systems. Structural design. Stress analysisrequirements
no current standard is supersededISBN 978 0 580 54019 6£60.00 members, £120.00 non-members
ACE/68/-/1
BS ISO 15014:2007Plastics. Extruded sheets of poly(vinylidenefluoride) (PVDF). Requirements and testmethods
no current standard is supersededISBN 978 0 580 56392 8£42.00 members, £84.00 non-members
PRI/76
BS ISO 15106:—Plastics. Film and sheeting. Determination ofwater vapour transmission rate
BS ISO 15106-4:2008Gas-chromatographic detection sensor method
no current standard is supersededISBN 978 0 580 56571 7£42.00 members, £84.00 non-members
PRI/75
BS ISO 15364:2007Ships and marine technology. Pressure/vacuumvalves for cargo tanks
supersedes BS EN ISO 15364:2002ISBN 978 0 580 54936 6£60.00 members, £120.00 non-members
SME/32/-/3
BS ISO/IEC 15408:—Information technology. Security techniques.Evaluation criteria for IT security
BS ISO/IEC 15408-2:2008Security functional components
supersedes BS ISO/IEC 15408-2:2005ISBN 978 0 580 58475 6£130.00 members, £260.00 non-members
IST/33
BS ISO 15592:—Fine-cut tobacco and smoking articles madefrom it. Methods of sampling, conditioning andanalysis
BS ISO 15592-3:2008Determination of total particulate matter ofsmoking articles using a routine analyticalsmoking machine, preparation for thedetermination of water and nicotine, andcalculation of nicotine-free dry particulatematter
supersedes BS ISO 15592-3:2003ISBN 978 0 580 60201 6£69.00 members, £138.00 non-members
AW/40
BS ISO 15633:2009Iron ores. Determination of nickel. Flameatomic absorption spectrometric method
no current standard is supersededISBN 978 0 580 57598 3£60.00 members, £120.00 non-members
ISE/58
BS Implementations continued...
22 Update Standards Apr 2009Prices may be subject to change.
BS ISO 22915:—Industrial trucks. Verification of stability
BS ISO 22915-8:2008Additional stability test for trucks operating inthe special condition of stacking with masttilted forward and load elevated
supersedes BS 5778:1979ISBN 978 0 580 55394 3£34.00 members, £68.00 non-members
MHE/7
BS ISO 23041:2007Space systems. Unmanned spacecraftoperational procedures. Documentation
no current standard is supersededISBN 978 0 580 55940 2£69.00 members, £138.00 non-members
ACE/68
BS ISO 24033:2009Polyethylene of raised temperature resistance(PE-RT) pipes. Effect of time and temperatureon the expected strength
no current standard is supersededISBN 978 0 580 57516 7£42.00 members, £84.00 non-members
PRI/88/4
BS ISO 24393:2008Rolling bearings. Linear motion rollingbearings. Vocabulary
no current standard is supersededISBN 978 0 580 55849 8£79.00 members, £158.00 non-members
MCE/7
BS ISO 24638:2008Space systems. Pressure components andpressure system integration
no current standard is supersededISBN 978 0 580 56582 3£69.00 members, £138.00 non-members
ACE/68/-/1
BS ISO/IEC 24727:—Identification cards. Integrated circuit cardprogramming interfaces
BS ISO/IEC 24727-4:2008Application programming interface (API)administration
no current standard is supersededISBN 978 0 580 58617 0£90.00 members, £180.00 non-members
IST/17
BS ISO/IEC 25012:2008Software engineering. Software product qualityrequirements and evaluation (SQuaRE). Dataquality model
no current standard is supersededISBN 978 0 580 59403 8£60.00 members, £120.00 non-members
IST/15
BS ISO/IEC 21827:2008Information technology. Security techniques.Systems security engineering. Capabilitymaturity model (SSE-CMM)
no current standard is supersededISBN 978 0 580 56213 6£114.00 members, £228.00 non-members
IST/33
BS ISO 22010:2007Space systems. Mass properties control
no current standard is supersededISBN 978 0 580 55478 0£60.00 members, £120.00 non-members
ACE/68/-/1
BS ISO 22108:2008Space systems. Non-flight items in flighthardware. Identification and control
no current standard is supersededISBN 978 0 580 56646 2£42.00 members, £84.00 non-members
ACE/68/-/3
BS ISO 22434:2006Transportable gas cylinders. Inspection andmaintenance of cylinder valves
no current standard is supersededISBN 978 0 580 55225 0£42.00 members, £84.00 non-members
PVE/3/1
BS ISO 22663:2007Space data and information transfer systems.Proximity-1 space link protocol. Data link layer
supersedes BS ISO 22663:2006ISBN 978 0 580 58279 0£109.00 members, £218.00 non-members
ACE/68/-/7
BS ISO 22666:2007Space data and information transfer systems.AOS (advanced orbiting systems) space data linkprotocol
supersedes BS ISO 22666:2005ISBN 978 0 580 57906 6£95.00 members, £190.00 non-members
ACE/68/-/7
BS ISO 22856:2008Equipment for crop protection. Methods for thelaboratory measurement of spray drift. Windtunnels
no current standard is supersededISBN 978 0 580 55605 0£60.00 members, £120.00 non-members
AGE/15
BS ISO 22900:—Road vehicles. Modular vehicle communicationinterface (MVCI)
BS ISO 22900-2:2009Diagnostic protocol data unit applicationprogramming interface (D-PDU API)
no current standard is supersededISBN 978 0 580 55417 9£142.00 members, £284.00 non-members
AUE/16
BS ISO/IEC 19796:—Information technology. Learning, educationand training. Quality management, assurancesand metrics
BS ISO/IEC 19796-3:2009Reference methods and metrics
no current standard is supersededISBN 978 0 580 58482 4£79.00 members, £158.00 non-members
IST/43
BS ISO 20160:2006Implants for surgery. Metallic materials.Classification of microstructures for alpha+betatitanium alloy bars
no current standard is supersededISBN 978 0 580 53153 8£42.00 members, £84.00 non-members
CH/150/1
BS ISO 20765:—Natural gas. Calculation of thermodynamicproperties
BS ISO 20765-1:2005Gas phase properties for transmission anddistribution applications
no current standard is supersededISBN 978 0 580 66761 9£84.00 members, £168.00 non-members
PTI/15
BS ISO 21013:—Cryogenic vessels. Pressure-relief accessories forcryogenic service
BS ISO 21013-3:2006Sizing and capacity determination
no current standard is supersededISBN 978 0 580 54552 8£42.00 members, £84.00 non-members
PVE/18
BS ISO 21439:2009Clinical dosimetry. Beta radiation sources forbrachytherapy
no current standard is supersededISBN 978 0 580 56286 0£95.00 members, £190.00 non-members
NCE/2
BS ISO 21460:2007Space data and information transfer systems.Proximity-1 space link protocol. Physical layer
supersedes BS ISO 21460:2006ISBN 978 0 580 58278 3£69.00 members, £138.00 non-members
ACE/68/-/7
BS ISO 21648:2008Space systems. Flywheel module design andtesting
no current standard is supersededISBN 978 0 580 56580 9£69.00 members, £138.00 non-members
ACE/68/-/1
Update Standards Apr 2009 Prices may be subject to change. 23
PD CEN/TR 15738:2008Petroleum products. Heating fuels. Need,feasibility and required deliverables for acommon European specification
no current standard is supersededISBN 978 0 580 60565 9£69.00 members, £138.00 non-members
PTI/2
PD ISO/TR 18792:2008Lubrication of industrial gear drives
no current standard is supersededISBN 978 0 580 56337 9£84.00 members, £168.00 non-members
MCE/5
DRAFTS FOR DEVELOPMENT
DD ISO/TS 13399:—Cutting tool data representation and exchange
DD ISO/TS 13399-150:2008Usage guidelines
no current standard is supersededISBN 978 0 580 64782 6£79.00 members, £158.00 non-members
MTE/18
DD CEN/TS 15398:2008Resilient, textile and laminate floor coverings.Floor covering standard symbols
supersedes DD CEN/TS 15398:2006ISBN 978 0 580 58927 0£34.00 members, £68.00 non-members
PRI/3
DD CEN/TS 15699:2009Health informatics. Clinical knowledgeresources. Metadata
no current standard is supersededISBN 978 0 580 58896 9£42.00 members, £84.00 non-members
IST/35
DD CEN/TS 15705:2009Fertilizers. Determination of urea condensatesusing high-performance liquid chromotography(HPLC). Isobutylidenediurea andcrotonylidenediurea (method A) and methylen-urea oligomers (method B)
no current standard is supersededISBN 978 0 580 58988 1£34.00 members, £68.00 non-members
CII/37
DD CEN/TS 15717:2008Parquet flooring. General guideline forinstallation
no current standard is supersededISBN 978 0 580 59941 5£21.00 members, £42.00 non-members
B/543
PD ISO/TR 11044:2008Water quality. Scientific and technical aspects ofbatch algae growth inhibition tests
no current standard is supersededISBN 978 0 580 64740 6£69.00 members, £138.00 non-members
EH/3/5
PD ISO/TR 12885:2008Nanotechnologies. Health and safety practicesin occupational settings relevant tonanotechnologies
no current standard is supersededISBN 978 0 580 64882 3£90.00 members, £180.00 non-members
NTI/1
PD CEN/TR 13930:2009Rotodynamic pumps. Design of pump intakes.Recommendations for installation of pumps
no current standard is supersededISBN 978 0 580 62247 2£60.00 members, £120.00 non-members
MCE/6
PD CEN/TR 13931:2009Rotodynamic pumps. Forces and moments onflanges. Centrifugal, mixed flow and axial flowhorizontal and vertical shafts pumps
no current standard is supersededISBN 978 0 580 62248 9£60.00 members, £120.00 non-members
MCE/6
PD CEN/TR 13932:2009Rotodynamic pumps. Recommendations forfitting of inlet and outlet on piping
no current standard is supersededISBN 978 0 580 62249 6£60.00 members, £120.00 non-members
MCE/6
PD CEN/TR 15367:—Petroleum products. Guide for goodhousekeeping
PD CEN/TR 15367-3:2009Prevention of cross contamination
no current standard is supersededISBN 978 0 580 63357 7£42.00 members, £84.00 non-members
PTI/2
PD ISO/IEC TR 15504:—Information technology. Process assessment
PD ISO/IEC TR 15504-7:2008Assessment of organizational maturity
no current standard is supersededISBN 978 0 580 63562 5£79.00 members, £158.00 non-members
IST/15
BS ISO 25137:—Plastics. Sulfone polymer moulding andextrusion materials
BS ISO 25137-1:2009Designation system and basis for specifications
no current standard is supersededISBN 978 0 580 57209 8£42.00 members, £84.00 non-members
PRI/82
BS ISO 25137-2:2009Preparation of test specimens anddetermination of properties
no current standard is supersededISBN 978 0 580 57210 4£34.00 members, £68.00 non-members
PRI/82
BS ISO 26423:2009Fine ceramics (advanced ceramics, advancedtechnical ceramics). Determination of coatingthickness by crater-grinding method
no current standard is supersededISBN 978 0 580 58969 0£60.00 members, £120.00 non-members
RPI/13
BS ISO 26602:2009Fine ceramics (advanced ceramics, advancedtechnical ceramics). Silicon nitride materials forrolling bearing balls
no current standard is supersededISBN 978 0 580 52975 7£42.00 members, £84.00 non-members
RPI/13
BS ISO 27831:—Metallic and other inorganic coatings. Cleaningand preparation of metal surfaces
BS ISO 27831-1:2008Ferrous metals and alloys
no current standard is supersededISBN 978 0 580 60152 1£69.00 members, £138.00 non-members
STI/33
BS ISO 27831-2:2008Non-ferrous metals and alloys
no current standard is supersededISBN 978 0 580 60151 4£84.00 members, £168.00 non-members
STI/33
PUBLISHED DOCUMENTS
PD 5500:2009Specification for unfired fusion welded pressurevessels
supersedes PD 5500:2006+A3:2008ISBN 978 0 580 64886 1£900.00 members, £1,800.00 non-members
PVE/1
BS Implementations continued...
24 Update Standards Apr 2009Prices may be subject to change.
SPECIALIST BOOKS FROMBSI
BIP 3082:2009Technical product specification CD
no current standard is supersededISBN 978 0 580 603686£525.00 members, £1,050.00 non-membersVAT is applicable to this item.
AMENDMENTS TO BRITISHSTANDARDS
Most amendments are not issuedseparately. Those that make significantchanges to a standard are incorporatedinto the standard which is re-issued as anew edition (see ’Updated BritishStandards’). Amendments which makesmaller changes or corrections areavailable on request, free of charge topast purchasers of the standard. Allamendments to date of despatch areincluded within any main publicationwhen ordered for the first time.
The following amendments to BritishStandards were made available lastmonth.
BS 4311:—Gauge blocks manufactured to imperialspecification
BS 4311-1:2007Specification and validation
CORRIGENDUM 1
TDW/4
BS 5395:—Stairs, ladders and walkways
BS 5395-2:1984Code of practice for the design of helical andspiral stairs
CORRIGENDUM 2
B/208
Also incorporates Corrigendum 1 and Amendment 1.
BS EN 1999:—Eurocode 9. Design of aluminium structures
BS EN 1999-1-2:2007Structural fire design
CORRIGENDUM 2
B/525/12
Also incorporates Corrigendum 1.
BS EN ISO 2818:1996Plastics. Preparation of test specimens bymachining
CORRIGENDUM 1
PRI/21
BS EN 10213:2007Steel castings for pressure purposes
CORRIGENDUM 1
ISE/6
BS EN 10340:2007Steel castings for structural uses
CORRIGENDUM 1
ISE/6
BS EN ISO 11689:1996Acoustics. Procedure for the comparison ofnoise-emission data for machinery andequipment
CORRIGENDUM 1
EH/1/4
BS EN 12915:—Products used for the treatment of waterintended for human consumption. Granularactivated carbon
BS EN 12915-1:2003Virgin granular activated carbon
CORRIGENDUM 1
CII/59
BS EN 13297:2007Textile floor coverings. Classification of needledpile floor coverings
CORRIGENDUM 1
PRI/3
BS EN ISO 13370:2007Thermal performance of buildings. Heattransfer via the ground. Calculation methods
CORRIGENDUM 1
B/540
BS EN ISO 13786:2007Thermal performance of building components.Dynamic thermal characteristics. Calculationmethods
CORRIGENDUM 1
B/540
BS EN ISO 13906:2008Animal feeding stuffs. Determination of aciddetergent fibre (ADF) and acid detergent lignin(ADL) contents
CORRIGENDUM 1
AW/10
BS EN 14388:2005Road traffic noise reducing devices.Specifications
CORRIGENDUM 1
B/509/6
BS EN 14511:—Air conditioners, liquid chilling packages andheat pumps with electrical driven compressorsfor space heating and cooling
BS EN 14511-3:2007Test methods
CORRIGENDUM 1
RHE/17
DD CEN ISO/TS 17665:—Sterilization of health care products. Moist heat
DD CEN ISO/TS 17665-2:2009Guidance on the application of ISO 17665-1
no current standard is supersededISBN 978 0 580 55837 5£69.00 members, £138.00 non-members
CH/198
DD ISO/TS 29041:2008Gas mixtures. Gravimetric preparation.Mastering correlations in composition
no current standard is supersededISBN 978 0 580 61975 5£34.00 members, £68.00 non-members
PTI/15
DD IEC/PAS 60704:—Household and similar electrical appliances. Testcode for the determination of airborneacoustical noise
DD IEC/PAS 60704-2-15:2008Particular requirements for household foodwaste disposers
no current standard is supersededISBN 978 0 580 64257 9£16.00 members, £32.00 non-members
CPL/59
DD IEC/PAS 62246:—Reed contact units
DD IEC/PAS 62246-2-1:2008Heavy-duty reed switches. Quality assessmentspecification
no current standard is supersededISBN 978 0 580 62837 5£42.00 members, £84.00 non-members
EPL/94
Update Standards Apr 2009 Prices may be subject to change. 25
Help Us to Help
You!
Always quote your Customer Number
Don’t know your number?
Contact Customer Services
020 8996 9001
who will be happy to check it for you
BS EN 60335-2-84:2003+A1:2008Particular requirements for toilets
AMENDMENT 1£42.00 members, £84.00 non-members
CPL/61/07
Also incorporates Corrigendum 1.
BS EN 60335-2-101:2002+A1:2008Particular requirements for vaporizers
AMENDMENT 1£42.00 members, £84.00 non-members
CPL/61/07
BS EN 60432:—Incandescent lamps. Safety specifications
BS EN 60432-3:2003+A2:2008Tungsten-halogen lamps (non-vehicle)
AMENDMENT 2£60.00 members, £120.00 non-members
CPL/34/1
Also incorporates Amendment 1.
BS EN 60745:—Hand-held motor-operated electric tools. Safety
BS EN 60745-2-9:2003+A1:2008Particular requirements for tappers
AMENDMENT 1£34.00 members, £68.00 non-members
CPL/61/6
Also incorporates Amendment 11.
BS EN 60745-2-18:2004+A1:2008Particular requirements for strapping tools
AMENDMENT 1£34.00 members, £68.00 non-members
CPL/61/6
Also incorporates Amendment 11 and Corrigendum 1.
BS ISO 10147:2004+A1:2008Pipes and fittings made of crosslinkedpolyethylene (PE-X). Estimation of the degreeof crosslinking by determination of the gelcontent
AMENDMENT 1£34.00 members, £68.00 non-members
PRI/88/4
BS 7888-4.2:2006+A1:2008(CENELEC HD 629.2 S2:2006)Cables with impregnated paper insulation
AMENDMENT 1£60.00 members, £120.00 non-members
GEL/20/11
BS 8405:2003+A1:2009Personal protective equipment against fallsfrom a height. Descender devices. Single-handoperated descender devices for self or assistedrescue
AMENDMENT 1£42.00 members, £84.00 non-members
PH/5
BS EN 490:2004+A1:2006Concrete roofing tiles and fittings for roofcovering and wall cladding. Productspecifications
AMENDMENT 1£60.00 members, £120.00 non-members
B/542/2
BS EN 574:1996+A1:2008Safety of machinery. Two-hand control devices.Functional aspects. Principles for design
AMENDMENT 1£69.00 members, £138.00 non-members
MCE/3
BS EN 1645:—Leisure accommodation vehicles. Caravans
BS EN 1645-1:2004+A1:2008Habitation requirements relating to health andsafety
AMENDMENT 1£79.00 members, £158.00 non-members
B/511
BS EN 1647:2004+A1:2008Leisure accommodation vehicles. Caravanholiday homes. Habitation requirementsrelating to health and safety
AMENDMENT 1£69.00 members, £138.00 non-members
B/511
BS EN 13218:2002+A1:2008Machine tools. Safety. Stationary grindingmachines
AMENDMENT 1£95.00 members, £190.00 non-members
MTE/1
BS EN 60335:—Household and similar electrical appliances.Safety
BS EN 60335-2-47:2003+A1:2008Particular requirements for commercial electricboiling pans
AMENDMENT 1£60.00 members, £120.00 non-members
CPL/61/5
Also incorporates Corrigendum 1.
BS EN 14600:2005Doorsets and openable windows with fireresisting and/or smoke control characteristics.Requirements and classification
CORRIGENDUM 1
B/538/1
BS EN ISO 19115:2005Geographic information. Metadata
CORRIGENDUM 1
IST/36
BS EN 62061:2005Safety of machinery. Functional safety of safety-related electrical, electronic and programmableelectronic control systems
CORRIGENDUM 2
MCE/3
Also incorporates Corrigendum 1.
BS ISO 815:—Rubber, vulcanized or thermoplastic.Determination of compression set
BS ISO 815-1:2008At ambient or elevated temperatures
CORRIGENDUM 1
PRI/22
BS ISO 5293:2004Conveyor belts. Determination of minimumtransition distance on three idler rollers
CORRIGENDUM 1
PRI/67
BS ISO 6709:2008Standard representation of geographic pointlocation by coordinates
CORRIGENDUM 1
IST/36
BS ISO 18431:—Mechanical vibration and shock. Signalprocessing
BS ISO 18431-2:2004Time domain windows for Fourier Transformanalysis
CORRIGENDUM 1
GME/21/2
UPDATED BRITISHSTANDARDSThe following standards have beenamended and the amendments havebeen incorporated into an updatedstandard.
NOTE: Updated British Standardsmust be reordered as theamendments are not availableseparately.
BS 7888:—Test requirements on accessories for use onpower cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42) kV
BS 7888-4.1:2006+A1:2008(CENELEC HD 629.1 S2:2006)Cables with extruded insulation
AMENDMENT 1£60.00 members, £120.00 non-members
GEL/20/11
Amendments to British Standards continued...
26 Update Standards Apr 2009Prices may be subject to change.
your order
BRITISH STANDARDSWITHDRAWN
If any standard in this list has beenamended since publication, allamendments published to date are alsowithdrawn
BS 903:—Physical testing of rubber
BS 903-2:1997Guide to the application of statistics to rubbertesting
PRI/22
Superseded by BS ISO 19003:2006
BS 903-A6:1992Method for determination of compression setat ambient, elevated or low temperatures
PRI/22
Superseded by BS ISO 815-1:2008 and BS ISO815-2:2008
BS 903-A25:1992Determination of low-temperature brittleness
PRI/22
Superseded by BS ISO 812:2006
BS 1841:—Rear-mounted, three-point linkage onagricultural wheeled tractors
BS 1841-1:1996Specification for categories 1, 2, 3 and 4
AGE/6
Superseded by BS ISO 730:2009
BS 2782:—Methods of testing plastics
BS 2782-11:Method 1150B:1998Thermoplastics pipes, fittings and valves. Plasticspipes and fittings. Preparation of polyethylene(PE) pipe/pipe or pipe/fitting test pieceassemblies by butt fusion
PRI/88/4
Superseded by BS ISO 11414:2009
BS 2782-11:Method 1150E:1997Thermoplastics pipes, fittings and valves. Plasticspipes and fittings. Preparation of test pieceassemblies between a polyethylene (PE) pipeand an electrofusion fitting
PRI/24
Superseded by BS ISO 11413:2008
BS EN 13802:2004Railway applications. Suspension components.Hydraulic dampers
RAE/3/-/4
BS EN 13990:2004Wood flooring. Solid softwood floor boards
B/543
DD ENV 14464:2002Sawn timber. Method for assessment of case-hardening
B/543
BS EN ISO 15616:—Acceptance tests for CO2-laser beam machinesfor high quality welding and cutting
BS EN ISO 15616-1:2003General principles, acceptance conditions
WEE/-/1
BS EN ISO 15616-2:2003Measurement of static and dynamic accuracy
WEE/-/1
BS EN ISO 15616-3:2003Calibration of instruments for measurement ofgas flow and pressure
WEE/-/1
BS ISO 15010:1998Disposable hanging devices for transfusion andinfusion bottles. Requirements and testmethods
CH/212
BRITISH STANDARDSDECLARED OBSOLESCENT
Declaration of obsolescence indicates thatthe standard is not recommended for usein new equipment but needs to beretained for the servicing of existingequipment that is expected to have along working life.
BS 7083:1996Guide to the accommodation and operatingenvironment for information technology (IT)equipment
IST/-/1
This standard has been declared obsolescent as thedocument needs to be revised in light of progressionin the area relating to the environments forinformation technology equipment
SPECIAL ANNOUNCEMENTS
Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000
BS 3156:—Analysis of fuel gases
BS 3156-11.4.1:1994Methods for non-manufactured gases.Determination of sulfur compounds in naturalgas. Introduction
This standard has been reinstated as it waswithdrawn in error.Contact: Bernard ShelleyEmail: [email protected]
PTI/15
BRITISH STANDARDSREVIEWED ANDCONFIRMED
It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.
Confirmation indicates the continuingcurrency of a standard.
Where any standard in this list has beenamended since publication, confirmationincludes all amendments published todate. Reference to a particularamendment indicates that it is publishedconcurrently with the confirmation.
BS EN 975:—Sawn timber. Appearance grading ofhardwoods
BS EN 975-2:2004Poplars
B/543
BS EN 1011:—Welding. Recommendations for welding ofmetallic materials
BS EN 1011-5:2003Welding of clad steel
WEE/-/1
BS EN ISO 9692:—Welding and allied processes. Joint preparation
BS EN ISO 9692-2:1998Submerged arc welding of steels
WEE/1
Update Standards Apr 2009 Prices may be subject to change. 27
BS 7252:—Metallic materials for surgical implants
BS 7252-5:1994Specification for wrought cobalt-chromium-tungsten-nickel alloy
CH/150/1
Superseded by BS ISO 5832-5:2005
BS 7252-9:1993Specification for high-nitrogen stainless steel
CH/150/1
Superseded by BS ISO 5832-9:2007
BS 7253:—Non-metallic materials for surgical implants
BS 7253-6:1997Specification for ceramic materials based onyttria-stabilized tetragonal zirconia (Y-TZP)
EPL/48
Superseded by BS ISO 13356:2008
BS 7689:1993Test methods for electroheating installationswith electron guns
PEL/27
Superseded by BS EN 60703:2009
BS 8434:—Methods of test for assessment of the fireintegrity of electric cables
BS 8434-1:2003Test for unprotected small cables for use inemergency circuits. BS EN 50200 with additionof water spray
GEL/20/18
Superseded by BS EN 50200:2006
DD 9999:2005Code of practice for fire safety in the design,construction and use of buildings
FSH/14
Superseded by BS 9999:2008
BS EN 531:1995Protective clothing for workers exposed to heat
PH/3/2
Superseded by BS EN ISO 11612:2008
BS EN 552:1994Sterilization of medical devices. Validation androutine control of sterilization by irradiation
CH/198
Superseded by BS EN ISO 11137-1:2006,BS EN ISO 11137-2:2007 and BS EN ISO 11137-3:2006
BS EN 737:—Medical gas pipeline systems
BS EN 737-2:1998Anaesthetic gas scavenging disposal systems.Basic requirements
CH/121/1
Superseded by BS EN ISO 7396-2:2007
BS 5588-9:1999Code of practice for ventilation and airconditioning ductwork
FSH/25
Superseded by BS 9999:2008
BS 5588-10:1991Code of practice for shopping complexes
FSH/14
Superseded by BS 9999:2008
BS 5588-11:1997Code of practice for shops, offices, industrial,storage and other similar buildings
FSH/14
Superseded by BS 9999:2008
BS 5588-12:2004Managing fire safety
FSH/14
Superseded by BS 9999:2008
BS 5763:—Methods for microbiological examination offood and animal feeding stuffs
BS 5763-14:1991Detection of Vibrio parahaemolyticus
AW/9
Superseded by DD ISO/TS 21872-1:2007
BS 5778:1979Methods of test for verification of stability ofindustrial trucks operating in special conditionof stacking with mast tilted forward
MHE/7
Superseded by BS ISO 22915-8:2008
BS 5812:—Materials for plain bearings
BS 5812-1:1979Specification for aluminium alloy for solidbearings
MCE/12
Superseded by BS ISO 6279:2006
BS 5954:—Dimensions of mechanical structures of the482.6 mm (19 in) series
BS 5954-2:1985Specification for cabinets and pitches of rackstructures
EPL/48
Superseded by BS EN 60297-3-100:2009
BS 6509:1984Specification for clearance zone on implementsfor the three-point linkage to agriculturaltractors
AGE/6
Superseded by BS ISO 2332:2009
BS 7251:—Orthopaedic joint prostheses
BS 7251-3:1997Specification for classification and designationof dimensions for hip joint prostheses
CH/150/4
Superseded by BS ISO 7206-1:2008
BS 5233:1986Glossary of terms used in metrology(incorporating BS 2643)
SS/7
This standard has been withdrawn as it is out ofdate. The original withdrawal was proposed on2007-07-26 but an objection was received. Thestandard references the International Vocabulary forTerms used in Metrology (VIM) prepared by the JointCommittee for Guides in Metrology (JCGM). A new3rd edition of the VIM was published as ISO/IECGuide 99:2007. BSI decided not to implementISO/IEC Guide 99:2007 but BS 5233:1986 conflictswith definitions given in the VIM and which areused by other International and European Standards.The responsible BSI committee reviewed its earlierdecision and has re-affirmed the need to withdrawBS 5233:1986
BS 5249:—Representation of elements of data ininterchanges using data processing systems
BS 5249-3:1983Specification for representation of latitude,longitude and altitude for geographical pointlocations
IST/36
Superseded by BS ISO 6709:2008
BS 5380:1984Specification for hydraulic port and studcoupling using ’O’-ring sealing and ’G’ seriesfastening threads
MCE/18
Superseded by BS EN ISO 1179-1:2008,BS EN ISO 1179-2:2008, BS EN ISO 1179-3:2008and BS EN ISO 1179-4:2008
BS 5588:—Fire precautions in the design, construction anduse of buildings
BS 5588-0:1996Guide to fire safety codes of practice forparticular premises/applications
FSH/14
Superseded by BS 9999:2008
BS 5588-5:2004Access and facilities for fire-fighting
FSH/14
Superseded by BS 9999:2008
BS 5588-6:1991Code of practice for places of assembly
FSH/14
Superseded by BS 9999:2008
BS 5588-7:1997Code of practice for the incorporation of atriain buildings
FSH/14
Superseded by BS 9999:2008
BS 5588-8:1999Code of practice for means of escape fordisabled people
FSH/14
Superseded by BS 9999:2008
British Standards Withdrawn continued...
28 Update Standards Apr 2009Prices may be subject to change.
BS EN 61009:—Electrical accessories. Residual current operatedcircuit-breakers with integral overcurrentprotection for household and similar uses(RCBO’s)
BS EN 61009-1:1995General rules
PEL/23
Superseded by BS EN 61009-1:2004
BS EN 61277:1998Terrestial photovoltaic (PV) power generatingsystems. General and guide
GEL/82
This standard has been withdrawn following thewithdrawal of the equivalent European StandardEN 61277:1998 and International Standard IEC61277:1995
BS IEC 61241:—Electrical apparatus for use in the presence ofcombustible dust
BS IEC 61241-4:2001Type of protection “pD”
GEL/31/20
Superseded by BS EN 61241-4:2006
BS IEC 61649:1997Procedures for goodness-of-fit tests, confidenceintervals and lower confidence limits forWeibull distributed data
DS/1/1
Superseded by BS EN 61649:2008
DD IEC/PAS 62431:2005Measurement methods for reflectivity ofelectromagnetic wave absorbers in millimetrewave frequency
EPL/46/2
Superseded by BS EN 62431:2008
BS 4A 4:—Uninterrupted creep and rupture tests. Metricunits
BS 4A 4-1.3:1967Specification for test pieces and test methodsfor metallic materials. Tensile tests
ACE/61
Superseded by BS EN 2002-005:2007
BS AU 199a:1997Specification for location of hand controls,indicators and tell-tales in passenger cars
AUE/12
Superseded by BS ISO 4040:2009
PAS 99:2006 (Spanish Translation)Especificacion de los requisitos comunes delsistema de gestion comomarco para laintegracionThis standard has been withdrawn withoutreplacement
BS EN ISO 15103:—Plastics. Poly(phenylene ether) (PPE) mouldingand extrusion materials
BS EN ISO 15103-1:2004Designation system and basis for specifications
PRI/82
Superseded by BS EN ISO 28941-1:2008
BS EN 24641:1993Rubber hoses for water suction and discharge.Specification
PRI/66
Superseded by BS EN ISO 4641:2008
BS EN 50083:—Cabled distribution systems for television andsound signals
BS EN 50083-2:2001Electromagnetic compatibility for equipment
EPL/100
Superseded by BS EN 50083-2:2006
BS EN 50165:1997Electrical equipment of non-electric appliancesfor household and similar purposes. Safetyrequirements
CPL/61
Superseded by BS EN 60335-2-102:2006
BS EN 60076:—Power transformers
BS EN 60076-5:2001Ability to withstand short circuit
PEL/14
Superseded by BS EN 60076-5:2006
BS EN 60335:—Safety of household and similar electricalappliances
BS EN 60335-2-97:2001Particular requirements for drives for rollingshutters, awnings, blinds and similar equipment
CPL/61/01
Superseded by BS EN 60335-2-97:2006
BS EN 60730:—Specification for automatic electrical controlsfor household and similar use
BS EN 60730-2-1:1997Particular requirements. Electrical controls forelectrical household appliances
CPL/72
Superseded by BS EN 60730-2-14:1998
BS EN 61008:—Specification for residual current operatedcircuit-breakers without integral overcurrentprotection for household and similar uses(RCCBs)
BS EN 61008-1:1995General rules
PEL/23/1
Superseded by BS EN 61008-1:2004
BS EN 737-3:2000Pipelines for compressed medical gases andvacuum
CH/121/1
Superseded by BS EN ISO 7396-1:2007
BS EN 738:—Pressure regulators for use with medical gases
BS EN 738-4:1999Low-pressure regulators intended forincorporation into medical equipment
CH/121/6
Superseded by BS EN ISO 10524-4:2008
BS EN ISO 10211:—Thermal bridges in building construction. Heatflows and surface temperatures
BS EN ISO 10211-1:1996General calculation methods
B/540
Superseded by BS EN ISO 10211:2007
BS EN ISO 10211-2:2001Linear thermal bridges
B/540
Superseded by BS EN ISO 10211:2007
BS EN 12330:2000Corrosion protection of metals.Electrodeposited coatings of cadmium on ironor steel
STI/33
Superseded by BS EN ISO 2082:2008
BS EN 13335:2002Leather. Physical and mechanical tests.Determination of flex resistance by the vampflex method
TCI/69
Superseded by BS EN ISO 22288:2009
BS EN 13540:2002Leather. Physical and mechanical tests.Determination of heat resistance of patentleather
TCI/69
Superseded by BS EN ISO 17232:2009
BS EN 14517:2004(BS 2000-526:2004)Methods of test for petroleum and its products.Liquid petroleum products. Determination ofhydrocarbon types and oxygenates in petrol.Multidimensional gas chromatography method
PTI/13
Superseded by BS EN ISO 22854:2008
BS EN ISO 14726:—Ships and marine technology. Identificationcolours for the content of piping systems
BS EN ISO 14726-1:2002Main colours and media
SME/32
Superseded by BS ISO 14726:2008
Update Standards Apr 2009 Prices may be subject to change. 29
BS 6955-15:1994(ISO 5347-15:1993)Method of test for acoustic sensitivity
GME/21/2
BS 6955-16:1994(ISO 5347-16:1993)Method of test for mounting torque sensitivity
GME/21/2
BS 6955-17:1994(ISO 5347-17:1993)Method of test for fixed temperature sensitivity
GME/21/2
BS 6955-18:1994(ISO 5347-18:1993)Method of test for transient temperaturesensitivity
GME/21/2
BS 6955-19:1994(ISO 5347-19:1993)Method of test for magnetic field sensitivity
GME/21/2
BS 7119:1989(ISO 8042:1988)Specification for shock and vibrationmeasurements: characteristics to be specifiedfor seismic pick-ups
GME/21/2
BS 7702:1993(ISO 9200:1993)Guide to volumetric metering of viscoushydrocarbons
PTI/12
BS 7832:1995(ISO 9699:1994)Performance standards in building. Checklist forbriefing. Contents of brief for building design
B/500
BS EN ISO 61:2000Plastics. Determination of apparent density ofmoulding material that cannot be poured froma specified funnel
PRI/21
BS EN ISO/TR 11688:—Acoustics. Recommended practice for thedesign of low-noise machinery and equipment
BS EN ISO/TR 11688-2:2001Introduction to the physics of low-noise design
EH/1/4
BS EN ISO 119:1998Plastics. Phenol-formaldehyde mouldings.Determination of free phenols. Iodometricmethod
PRI/21
BS 6001-7:2006(ISO 18414:2006)Accept-zero sampling system based on creditprinciple for controlling outgoing quality
SS/5
BS 6002:—Sampling procedures for inspection by variables
BS 6002-4:2006(ISO 3951-5:2006)Sequential sampling plans indexed byacceptance quality limit (AQL) for inspection byvariables (known standard deviation)
SS/5
BS 6740:1986(ISO 4291:1985)Method for determining departures fromroundness by measuring variations in radius
TDW/4
BS 6954:—Tolerances for building
BS 6954-2:1988(ISO 3443-2:1979)Recommendations for statistical basis forpredicting fit between components having anormal distribution of sizes
B/554
BS 6955:—Calibration of vibration and shock pick-ups
BS 6955-5:1994(ISO 5347-5:1993)Method for calibration by earth’s gravitation
GME/21/2
BS 6955-7:1994(ISO 5347-7:1993)Methods for primary calibration by centrifuge
GME/21/2
BS 6955-8:1994(ISO 5347-8:1993)Method for primary calibration by dualcentrifuge
GME/21/2
BS 6955-10:1994(ISO 5347-10:1993)Method for primary calibration by high impactshocks
GME/21/2
BS 6955-12:1994(ISO 5347-12:1993)Method of test for transverse shock sensitivity
GME/21/2
BS 6955-13:1994(ISO 5347-13:1993)Method of test for base strain sensitivity
GME/21/2
BRITISH STANDARDS UNDERREVIEW
The following British Standardsimplement International and/or EuropeanStandards which are currently underreview to see if they should be confirmed,revised or withdrawn.
Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL or via email [email protected] by31 May, 2009, in order to be consideredby the relevant UK Committee.
BS 903:—Physical testing of rubber
BS 903-A13:1990(ISO 1432:1988)Method for determination of stiffness at lowtemperature (Gehman test)
PRI/22
BS 903-A58.1:2001(ISO 289-3:1999)Methods using the Mooney viscometer.Determination of the Delta Mooney value fornon-pigmented, oil-extended, emulsion-polymerized SBR
PRI/22
BS 903-A63:1995(ISO 3387:1994)Method for determination of crystallizationeffects by hardness measurements
PRI/22
BS 2782:—Methods of testing plastics
BS 2782-7:Method 732D:1999(ISO 1628-4:1999)Rheological properties. Determination of theviscosity of polycarbonate (PC) moulding andextrusion materials in dilute solution usingcapillary viscometers
PRI/21
BS 6001:—Sampling procedures for inspection byattributes
BS 6001-0:2006(ISO 2859-10:2006)Introduction to the BS 6001 (ISO 2859) series ofstandards for sampling for inspection byattributes
SS/5
BS 6001-1:1999(ISO 2859-1:1999)Sampling schemes indexed by acceptancequality limit (AQL) for lot-by-lot inspection
SS/5
British Standards Under Review
30 Update Standards Apr 2009Prices may be subject to change.
BS EN ISO 2578:1999(BS 2782-1:Method 135:1993)Plastics. Determination of the time-temperaturelimits after prolonged exposure to heat
PRI/21
BS EN ISO 3001:1999Plastics. Epoxy compounds. Determination ofepoxy equivalent
PRI/42
BS EN ISO 3219:1995(BS 2782-7:Method 730B:1994)Plastics. Polymers/resins in the liquid state or asemulsions or dispersions. Determination ofviscosity using a rotational viscometer withdefined shear rate
PRI/21
BS EN ISO 3650:1999Geometrical product specifications (GPS).Length standards. Gauge blocks
TDW/4
BS EN ISO 3785:2006Metallic materials. Designation of test specimenaxes in relation to product texture
ISE/NFE/4/4
BS EN ISO 3915:1999Plastics. Measurement of resistivity ofconductive plastics
PRI/21
BS EN ISO 4032:2001Hexagon nuts, style 1. Product grades A and B
FME/9/3
BS EN ISO 4033:2001Hexagon nuts, style 2. Product grades A and B
FME/9/3
BS EN ISO 4034:2001Hexagon nuts. Product grade C
FME/9/3
BS EN ISO 4035:2001Hexagon thin nuts (chamfered). Product gradesA and B
FME/9/3
BS EN ISO 4036:2001Hexagon thin nuts (unchamfered). Productgrade B
FME/9/3
BS EN ISO 4263:—Petroleum and related products. Determinationof the ageing behaviour of inhibited oils andfluids. TOST test
BS EN ISO 4263-4:2006Procedure for industrial gear oils
PTI/13
BS EN 820:—Advanced technical ceramics. Monolithicceramics. Thermomechanical properties
BS EN 820-3:2004Determination of resistance to thermal shock bywater quenching
RPI/13
BS EN 821:—Advanced technical ceramics. Monolithicceramics. Thermo-physical properties
BS EN 821-3:2005Determination of specific heat capacity
RPI/13
BS EN ISO/IEC 15415:2005Information technology. Automaticidentification and data capture techniques. Barcode print quality test specification. Two-dimensional symbols
IST/34
BS EN ISO/IEC 15426:—Information technology. Automaticidentification and data capture techniques. Barcode verifier conformance specification
BS EN ISO/IEC 15426-2:2005Two-dimensional symbols
IST/34
BS EN 1007:—Advanced technical ceramics. Ceramiccomposites. Methods of test for reinforcements
BS EN 1007-4:2004Determination of tensile properties of filamentsat ambient temperature
RPI/13
BS EN ISO 1307:2008Rubber and plastics hoses. Hose sizes, minimumand maximum inside diameters, and toleranceson cut-to-length hoses
PRI/66
BS EN ISO 1401:2000Rubber hoses for agricultural spraying
PRI/66
BS EN ISO 1478:2000Tapping screw thread
FME/9/2
BS EN ISO 2538:2003Geometrical product specifications (GPS). Seriesof angles and slopes on prisms
TDW/4
BS EN ISO 2555:2000Plastics. Resins in the liquid state or asemulsions or dispersions. Determination ofapparent viscosity by the Brookfield Testmethod
PRI/21
BS EN ISO 120:1998Plastics. Phenol-formaldehyde mouldings.Determination of free ammonia andammonium compounds. Colorimetriccomparison method
PRI/21
BS EN ISO 172:1998Plastics. Phenol-formaldehyde mouldings.Detection of free ammonia
PRI/21
BS EN ISO 175:2001(BS 2782-8:Method 830A:1999)Plastics. Methods of test for the determinationof the effects of immersion in liquid chemicals
PRI/21
BS EN ISO 177:2000Plastics. Determination of migration ofplasticizers
PRI/21
BS EN ISO 182:—Plastics. Determination of the tendency ofcompounds and products based on vinylchloride homopolymers and copolymers toevolve hydrogen chloride and any other acidicproducts at elevated temperatures
BS EN ISO 182-3:2000Conductometric method
PRI/21
BS EN ISO 182-4:2000Potentiometric method
PRI/21
BS EN ISO 389:—Acoustics. Reference zero for the calibration ofaudiometric equipment
BS EN ISO 389-5:2006Reference equivalent threshold sound pressurelevels for pure tones in the frequency range 8 kHz to 16 kHz
EH/1/1
BS EN ISO 463:2006Geometrical product specifications (GPS).Dimensional measuring equipment. Design andmetrological characteristics of mechanical dialgauges
TDW/4
BS EN ISO 489:1999(BS 2782-5:Method 531A:1999)Plastics. Determination of refractive index
PRI/21
BS EN 623:—Advanced technical ceramics. Monolithicceramics. General and textural properties
BS EN 623-4:2004Determination of surface roughness
RPI/13
Update Standards Apr 2009 Prices may be subject to change. 31
BS EN ISO 7197:2006Neurosurgical implants. Sterile, single-usehydrocephalus shunts and components
CH/150/3
BS EN ISO 7233:2008Rubber and plastics hoses and hose assemblies.Determination of resistance to vacuum
PRI/66
BS EN ISO 7278:—Liquid hydrocarbons. Dynamic measurement.Proving systems for volumetric meters
BS EN ISO 7278-1:1996General principles
PTI/12
BS EN ISO 7326:2008Rubber and plastics hoses. Assessment of ozoneresistance under static conditions
PRI/66
BS EN ISO 7327:1997Plastics. Hardeners and accelerators for epoxideresins. Determination of free acid in acidanhydride
PRI/21
BS EN ISO 7384:1995Corrosion tests in artificial atmospheres.General requirements
ISE/NFE/8
BS EN ISO 7539:—Corrosion of metals and alloys. Stress corrosiontesting
BS EN ISO 7539-1:1995General guidance on testing procedures
ISE/NFE/8
BS EN ISO 7539-2:1995Preparation and use of bent-beam specimens
ISE/NFE/8
BS EN ISO 7539-3:1995Preparation and use of U-bend specimens
ISE/NFE/8
BS EN ISO 7539-4:1995Preparation and use of uniaxially loadedtension specimens
ISE/NFE/8
BS EN ISO 7539-5:1995Method for the preparation and use of C-ringspecimens
ISE/NFE/8
BS EN ISO 7539-7:2005Method for slow strain rate testing
ISE/NFE/8
BS EN ISO 7662:1996Rubber and plastics hoses. Determination ofabrasion of lining
PRI/66
BS EN ISO 6360:—Dentistry. Number coding system for rotaryinstruments
BS EN ISO 6360-7:2006Specific characteristics of mandrels and specialinstruments
CH/106/4
BS EN ISO 6509:1995Corrosion of metals and alloys. Determinationof dezincification resistance of brass
ISE/NFE/8
BS EN ISO 6721:—Plastics. Determination of dynamic mechanicalproperties
BS EN ISO 6721-3:1996(BS 2782-3:Method 338A:1996)Flexural vibration. Resonance-curve method
PRI/21
BS EN ISO 6744:—Binders for paints and varnishes. Alkyd resins
BS EN ISO 6744-1:2004(BS 6782-16.1:2000)General methods
STI/3
BS EN ISO 6744-2:2004(BS 6782-16.2:2000)Determination of phthalic anhydride content
STI/3
BS EN ISO 6744-3:2004(BS 6782-16.3:2000)Determination of unsaponifiable mattercontent
STI/3
BS EN ISO 6744-4:2004(BS 6782-16.4:2000)Determination of fatty acid content
STI/3
BS EN ISO 6808:2001Plastics hoses and hose assemblies for suctionand low-pressure discharge of petroleumliquids. Specification
PRI/66
BS EN ISO 6877:2006Dentistry. Root-canal obturating points
CH/106/1
BS EN ISO 6887:—Microbiology of food and animal feeding stuffs.Preparation of test samples, initial suspensionand decimal dilutions for microbiologicalexamination
BS EN ISO 6887-1:1999General rules for the preparation of the initialsuspension and decimal dilutions
AW/9
BS EN ISO 4630:—Clear liquids. Estimation of colour by theGardner colour scale
BS EN ISO 4630-1:2004Visual method
STI/3
BS EN ISO 4630-2:2004Spectrophotometric method
STI/3
BS EN ISO 4753:2000Fasteners. Ends of parts with external ISO metricscrew thread
FME/9/3
BS EN ISO 4892:—Plastics. Methods of exposure to laboratorylight sources
BS EN ISO 4892-3:2006Fluorescent UV lamps
PRI/21
BS EN ISO 5172:2006Gas welding equipment. Blowpipes for gaswelding, heating and cutting. Specificationsand tests
WEE/18
BS EN ISO 5269:—Pulps. Preparation of laboratory sheets forphysical testing
BS EN ISO 5269-1:2005Conventional sheet-former method
PAI/11
BS EN ISO 5458:1999Geometrical product specifications (GPS).Geometrical tolerancing. Positional tolerancing
TDW/4
BS EN ISO 5774:2008Plastic hoses. Textile-reinforced types forcompressed-air applications. Specification
PRI/66
BS EN ISO 5845:—Technical drawings. Simplified representation ofthe assembly of parts with fasteners
BS EN ISO 5845-1:1999General principles
TDW/4
BS EN ISO 6271:—Clear liquids. Estimation of colour by theplatinum-cobalt scale
BS EN ISO 6271-1:2004(BS 6782-12.1:2004)Visual method
STI/3
BS EN ISO 6271-2:2004(BS 6782-12.2:2004)Spectrophotometric method
STI/3
British Standards Under Review continued...
32 Update Standards Apr 2009Prices may be subject to change.
BS EN ISO 10272:—Microbiology of food and animal feeding stuffs.Horizontal method for detection andenumeration of Campulobacter spp
BS EN ISO 10272-1:2006Detection method
AW/9
BS EN ISO 10524:—Pressure regulators for use with medical gases
BS EN ISO 10524-1:2006Pressure regulators and pressure regulatorswith flow-metering devices
CH/121/6
BS EN ISO 10666:1999Drilling screws with tapping screw threads.Mechanical and functional properties
FME/9/2
BS EN ISO 10848:—Acoustics. Laboratory measurement of theflanking transmission of airborne and impactsound between adjoining rooms
BS EN ISO 10848-1:2006Frame document
EH/1/6
BS EN ISO 10848-2:2006Application to light elements when the junctionhas a small influence
EH/1/6
BS EN ISO 10848-3:2006Application to light elements when the junctionhas a substantial influence
EH/1/6
BS EN ISO 11064:—Ergonomic design of control centres
BS EN ISO 11064-7:2006Principles for the evaluation of control centres
PH/9
BS EN ISO 11145:2008Optics and photonics. Lasers and laser-relatedequipment. Vocabulary and symbols
CPW/172/9
BS EN ISO 11306:1998Corrosion of metals and alloys. Guidelines forexposing and evaluating metals and alloys insurface sea water
ISE/NFE/8
BS EN ISO 11358:1997(BS 2782-1:Method 127A:1997)Plastics. Thermogravimetry (TG) of polymers.General principles
PRI/21
BS EN ISO 8675:2001Hexagon thin nuts (chamfered) with metric finepitch thread. Product grades A and B
FME/9/3
BS EN ISO 8785:1999Geometrical product specification (GPS). Surfaceimperfections. Terms, definitions andparameters
TDW/4
BS EN ISO 8975:1995(BS 2782-4:Method 451K:1995)Plastics. Phenolic resins. Determination of pH
PRI/21
BS EN ISO 8988:2006Plastics. Phenolic resins. Determination ofhexamethylene-tetramine content. Kjeldahlmethod, perchloric acid method andhydrochloric acid method
PRI/42
BS EN ISO 9241:—Ergonomics of human-system interaction
BS EN ISO 9241-110:2006Dialogue principles
PH/9
BS EN ISO 9288:1996Thermal insulation. Heat transfer by radiation.Physical quantities and definitions
B/540
BS EN ISO 9400:1996Nickel-based alloys. Determination of resistanceto intergranular corrosion
ISE/NFE/8
BS EN ISO 10062:2008Corrosion tests in artificial atmosphere at verylow concentrations of polluting gas(es)
ISE/NFE/8
BS EN ISO 10082:2000Plastics. Phenolic resins. Classification and testmethods
PRI/42
BS EN ISO 10087:2006Small craft. Craft identification. Coding system
GME/33
BS EN ISO 10101:—Natural gas. Determination of water by the KarlFischer method
BS EN ISO 10101-1:1998Introduction
PTI/15
BS EN ISO 10101-2:1998Titration procedure
PTI/15
BS EN ISO 10101-3:1998Coulometric procedure
PTI/15
BS EN ISO 7721:—Countersunk flat head screws
BS EN ISO 7721-2:1995Penetration depth of cross recesses
FME/9
BS EN ISO 7751:1997Rubber and plastics hoses and hose assemblies.Ratios of proof and burst pressure to designworking pressure
PRI/66
BS EN ISO 7932:2004Microbiology of food and animal feeding stuffs.Horizontal method for the enumeration ofpresumptive Bacillus cereus. Colony-counttechnique at 30°C
AW/9
BS EN ISO 8028:2000Rubber and/or plastics hose assemblies forairless paint spraying. Specification
PRI/66
BS EN ISO 8033:2006Rubber and plastics hoses. Determination ofadhesion between components
PRI/66
BS EN ISO 8044:2000Corrosion of metals and alloys. Basic terms anddefinitions
ISE/NFE/8
BS EN ISO 8092:—Road vehicles. Connections for on-boardelectrical wiring harnesses
BS EN ISO 8092-3:1999Tabs for multi-pole connections. Dimensionsand specific requirements
AUE/16
BS EN ISO 8092-4:1999Pins for single- and multi-pole connections.Dimensions and specific requirements
AUE/16
BS EN ISO 8308:2008Rubber and plastics hoses and tubing.Determination of transmission of liquidsthrough hose and tubing walls
PRI/66
BS EN ISO 8536:—Infusion equipment for medical use
BS EN ISO 8536-1:2008Infusion glass bottles
CH/212
BS EN ISO 8673:2001Hexagon nuts, style 1, with metric fine pitchthread. Product grades A and B
FME/9/3
BS EN ISO 8674:2001Hexagon nuts, style 2, with metric fine pitchthread. Product grades A and B
FME/9/3
Update Standards Apr 2009 Prices may be subject to change. 33
BS EN ISO 13697:2006Optics and photonics. Lasers and laser-relatedequipment. Test methods for specularreflectance and regular transmittance of opticallaser components
CPW/172
BS EN 13763:—Explosives for civil uses. Detonators and relays
BS EN 13763-13:2004Determination of resistance of electricdetonators against electrostatic discharge
CII/61
BS EN 13763-15:2004Determination of equivalent initiatingcapability
CII/61
BS EN 13763-25:2004Determination of transfer capability of surfaceconnectors, relay and coupling accessories
CII/61
BS EN 13763-26:2004Definitions, methods and requirements fordevices and accessories for reliable and safefunctioning of detonators and relays
CII/61
BS EN 13938:—Explosives for civil uses. Propellants and rocketpropellants
BS EN 13938-1:2004Requirements
CII/61
BS EN 13938-2:2004Determination of resistance to electrostaticenergy
CII/61
BS EN 13938-5:2004Determination of voids and fissures
CII/61
BS EN 13938-6:2004Solid rocket propellants. Guide for thedetermination of integrity of inhibitor coatings
CII/61
BS EN 13938-7:2004Determination of properties of black powder
CII/61
BS EN 14071:2004Pressure relief valves for LPG tanks. Ancillaryequipment
PVE/19
BS EN ISO 14111:1999(BS 3156-11.0.3:1999)Natural gas. Guidelines to traceability inanalysis
PTI/15
BS EN ISO 12402:—Personal flotation devices
BS EN ISO 12402-8:2006Accessories. Safety requirements and testmethods
PH/3/6
BS EN ISO 12402-10:2006Selection and application of personal flotationdevices and other relevant devices
PH/3/6
BS EN 12476:2000Phosphate conversion coatings of metals.Method of specifying requirements
STI/38
BS EN ISO 12625:—Tissue paper and tissue products
BS EN ISO 12625-6:2005Determination of grammage
PAI/11
BS EN ISO 13468:—Plastics. Determination of the total luminoustransmittance of transparent materials
BS EN ISO 13468-2:2006Double-beam instrument
PRI/21
BS EN ISO 13565:—Geometric Product Specifications (GPS). Surfacetexture: Profile method. Surfaces havingstratified functional properties
BS EN ISO 13565-3:2000Height characterization using the materialprobability curve
TDW/4
BS EN 13630:—Explosives for civil uses. Detonating cords andsafety fuses
BS EN 13630-9:2004Determination of transmission of detonationfrom detonating cord to detonating cord
CII/61
BS EN 13631:—Explosives for civil uses. High explosives
BS EN 13631-3:2004Determination of sensitiveness to friction ofexplosives
CII/61
BS EN 13631-12:2004Specifications of boosters with differentinitiating capability
CII/61
BS EN 13631-16:2004Detection and measurement of toxic gases
CII/61
BS EN ISO 11403:—Plastics. Acquisition and presentation ofcomparable multipoint data
BS EN ISO 11403-3:2001Environmental influences on properties
PRI/21
BS EN ISO 11442:2006Technical product documentation. Documentmanagement
TDW/4
BS EN ISO 11541:2002Natural gas. Determination of water content athigh pressure
PTI/15
BS EN ISO 11688:—Acoustics. Recommended practice for thedesign of low-noise machinery and equipment
BS EN ISO 11688-1:1998Planning
EH/1/4
BS EN ISO 11690:—Acoustics. Recommended practice for thedesign of low-noise workplaces containingmachinery
BS EN ISO 11690-3:1999Sound propagation and noise prediction inworkrooms
EH/1/4
BS EN ISO 11737:—Sterilization of medical devices. Microbiologicalmethods
BS EN ISO 11737-1:2006Determination of a population ofmicroorganisms on products
CH/198
BS EN ISO 11782:—Corrosion of metals and alloys. Corrosionfatigue testing
BS EN ISO 11782-1:2008Cycles to failure testing
ISE/NFE/8
BS EN ISO 11782-2:2008Crack propagation testing using precrackedspecimens
ISE/NFE/8
BS EN ISO 11844:—Corrosion of metals and alloys. Classification oflow corrosivity of indoor atmospheres
BS EN ISO 11844-1:2008Determination and estimation of indoorcorrosivity
ISE/NFE/8
British Standards Under Review continued...
34 Update Standards Apr 2009Prices may be subject to change.
BS EN ISO 14529:—Plastics. Melamine/phenolic powder mouldingcompounds (MP-PMCs)
BS EN ISO 14529-1:2000Designation system and basis for specifications
PRI/42
BS EN ISO 14529-2:2000Preparation of test specimens anddetermination of properties
PRI/42
BS EN ISO 14529-3:2000Requirements for selected mouldingcompounds
PRI/42
BS EN ISO 14530:—Plastics. Unsaturated-polyester powdermoulding compounds (UP-PMCs)
BS EN ISO 14530-1:2000Designation system and basis for specifications
PRI/42
BS EN ISO 14530-2:2000Preparation of test specimens anddetermination of properties
PRI/42
BS EN ISO 14530-3:2000Requirements for selected mouldingcompounds
PRI/42
BS EN ISO 14814:2006Road transport and traffic telematics.Automatic vehicle and equipmentidentification. Reference architecture andterminology
EPL/278
BS EN ISO 14851:2004Determination of the ultimate aerobicbiodegradability of plastic materials in anaqueous medium. Method by measuring theoxygen demand in a closed respirometer
PRI/21
BS EN ISO 14880:—Optics and photonics. Microlens arrays
BS EN ISO 14880-2:2006Test methods for wavefront aberrations
CPW/172
BS EN ISO 14880-3:2006Test methods for optical properties other thanwavefront aberrations
CPW/172
BS EN ISO 14880-4:2006Test methods for geometrical properties
CPW/172
BS EN 14483-3:2004Determination of resistance to chemicalcorrosion by alkaline liquids using a hexagonalvessel
STI/36
BS EN 14483-4:2004Determination of resistance to chemicalcorrosion by alkaline liquids using a cylindricalvessel
STI/36
BS EN 14483-5:2004Determination of resistance to chemicalcorrosion in closed systems
STI/36
BS EN ISO 14526:—Plastics. Phenolic powder moulding compounds(PF-PMCs)
BS EN ISO 14526-1:2000Designation system and basis for specifications
PRI/42
BS EN ISO 14526-2:2000Preparation of test specimens anddetermination of properties
PRI/42
BS EN ISO 14526-3:2000Requirements for selected mouldingcompounds
PRI/42
BS EN ISO 14527:—Plastics. Urea-formaldehyde andurea/melamine-formaldehyde powder mouldingcompounds (UF- and UF/MF-PMCs)
BS EN ISO 14527-1:2000Designation system and basis for specifications
PRI/42
BS EN ISO 14527-2:2000Preparation of test specimens anddetermination of properties
PRI/42
BS EN ISO 14527-3:2000Requirements for selected mouldingcompounds
PRI/42
BS EN ISO 14528:—Plastics. Melamine-formaldehyde powdermoulding compounds (MF-PMCs)
BS EN ISO 14528-1:2000Designation system and basis for specifications
PRI/42
BS EN ISO 14528-2:2000Preparation of test specimens anddetermination of properties
PRI/42
BS EN ISO 14528-3:2000Requirements for selected mouldingcompounds
PRI/42
BS EN ISO 14126:1999Fibre-reinforced plastic composites.Determination of compressive properties in thein-plane direction
PRI/42
BS EN 14129:2004Pressure relief valves for LPG tanks
PVE/19
BS EN 14140:2003Transportable refillable welded steel cylindersfor liquefied petroleum gas (LPG). Alternativedesign and construction
PVE/19
BS EN ISO 14253:—Geometrical product specifications (GPS).Inspection by measurement of workpieces andmeasuring equipment
BS EN ISO 14253-1:1999Decision rules for proving conformance or non-conformance with specifications
TDW/4
DD ENV ISO 14253:—Geometrical product specifications (GPS).Inspection by measurement of workpieces andmeasuring equipments
DD ENV ISO 14253-2:2001Guide to the estimation of uncertainty in GPSmeasurement, in calibration of measuringequipment and in product verification
TDW/4
BS EN ISO 14323:2006Resistance spot welding and projection welds.Destructive testing of welds. Specimendimensions and procedure for impact shear testand cross-tension testing
WEE/2
BS EN 14430:2004Vitreous and porcelain enamels. High voltagetest
STI/36
BS EN 14431:2004Vitreous and porcelain enamels. Characteristicsof the enamel coatings applied to steel panelsintended for architecture
STI/36
BS EN 14483:—Vitreous and porcelain enamels. Determinationof resistance to chemical corrosion
BS EN 14483-1:2004Determination of resistance to chemicalcorrosion by acids at room temperature
STI/36
BS EN 14483-2:2004Determination of resistance to chemicalcorrosion by boiling acids, neutral liquids and/ortheir vapours
STI/36
Update Standards Apr 2009 Prices may be subject to change. 35
BS EN ISO 16784:—Corrosion of metals and alloys. Corrosion andfouling in industrial cooling water systems
BS EN ISO 16784-1:2008Guidelines for conducting pilot-scale evaluationof corrosion and fouling control additives foropen recirculating cooling water systems
ISE/NFE/8
BS EN ISO 16784-2:2008Evaluation of the performance of cooling watertreatment programmes using a pilot-scale testrig
ISE/NFE/8
BS EN ISO 17201:—Acoustics. Noise from shooting ranges
BS EN ISO 17201-2:2006Estimation of muzzle blast and projectile soundby calculation
EH/1/3
BS EN ISO 17201-4:2006Prediction of projectile sound
EH/1/3
BS EN ISO 17249:2004Safety footwear with resistance to chain sawcutting
PH/1
BS EN 20273:1992(ISO 273:1979)Fasteners. Clearance holes for bolts and screws
FME/9
BS EN ISO 21469:2006Safety of machinery. Lubricants with incidentalproduct contact. Hygiene requirements
MCE/3
BS EN ISO 21787:2006Industrial valves. Globe valves of thermoplasticsmaterials
PSE/7/16
BS EN ISO 21871:2006Microbiology of food and animal feeding stuffs.Horizontal method for the determination oflow numbers of presumptive Bacillus cereus.Most probable number technique and detectionmethod
AW/9
BS EN ISO 22088:—Plastics. Determination of resistance toenvironmental stress cracking (ESC)
BS EN ISO 22088-1:2006General guidance
PRI/21
BS EN ISO 22088-2:2006Constant tensile load method
PRI/21
BS EN ISO 16000:—Indoor air
BS EN ISO 16000-9:2006Determination of the emission of volatileorganic compounds from building products andfurnishing. Emission test chamber method
EH/2/3
BS EN ISO 16000-10:2006Determination of the emission of volatileorganic compounds from building products andfurnishing. Emission test cell method
EH/2/3
BS EN ISO 16000-11:2006Determination of the emission of volatileorganic compounds from building products andfurnishing. Sampling, storage of samples andpreparation of test specimens
EH/2/3
BS EN ISO 16106:2006Packaging. Transport packages for dangerousgoods. Dangerous goods packagings,intermediate bulk containers (IBCs) and largepackagings. Guidelines for the application ofISO 9001
PKW/0
BS EN ISO 16135:2006Industrial valves. Ball valves of thermoplasticmaterials
PSE/7/16
BS EN ISO 16136:2006Industrial valves. Butterfly valves ofthermoplastic materials
PSE/7/16
BS EN ISO 16137:2006Industrial valves. Check valves of thermoplasticmaterials
PSE/7/16
BS EN ISO 16138:2006Industrial valves. Diaphragm valves ofthermoplastics materials
PSE/7/16
BS EN ISO 16139:2006Industrial valves. Gate valves of thermoplasticmaterials
PSE/7
BS EN ISO 16140:2003Microbiology of food and animal feeding stuffs.Protocol for the validation of alternativemethods
AW/9
BS EN ISO 16708:2006Petroleum and natural gas industries. Pipelinetransportation systems. Reliability-based limitstate methods
PSE/17/2/1
BS EN ISO 15252:—Plastics. Epoxy powder moulding compounds(EP-PMCs)
BS EN ISO 15252-1:2000Designation system and basis for specifications
PRI/42
BS EN ISO 15252-2:2000Preparation of test specimens anddetermination of properties
PRI/42
BS EN ISO 15252-3:2000Requirements for selected mouldingcompounds
PRI/42
BS EN ISO 15310:2005Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method
PRI/42
BS EN ISO 15378:2007Primary packaging materials for medicinalproducts. Particular requirements for theapplication of ISO 9001:2000, with reference toGood Manufacturing Practice (GMP)
CH/212
BS EN ISO 15480:1999Hexagon washer head drilling screws withtapping screw thread
FME/9/2
BS EN ISO 15481:1999Cross recessed pan head drilling screws withtapping screw thread
FME/9/2
BS EN ISO 15482:1999Cross recessed countersunk head drilling screwswith tapping screw thread
FME/9/2
BS EN ISO 15483:1999Cross recessed raised countersunk head drillingscrews with tapping screw thread
FME/9
BS EN ISO 15614:—Specification and qualification of weldingprocedures for metallic materials. Weldingprocedure test
BS EN ISO 15614-6:2006Arc and gas welding of copper and its alloys
WEE/36
BS EN ISO 15880:2004(BS 6782-17:2001)Paints, varnishes and binders. Determination ofMEQ value of water-based coating materialsand binders
STI/3
British Standards Under Review continued...
36 Update Standards Apr 2009Prices may be subject to change.
BS ISO/TR 5659:—Plastics. Smoke generation
BS ISO/TR 5659-3:1999Determination of optical density by a dynamicflow method
PRI/26
BS ISO 5725:—Accuracy (trueness and precision) ofmeasurement methods and results
BS ISO 5725-5:1998Alternative methods for the determination ofthe precision of a standard measurementmethod
SS/6
BS ISO 5832:—Implants for surgery. Metallic materials
BS ISO 5832-2:1999Unalloyed titanium
CH/150/1
BS ISO 6721:—Plastics. Determination of dynamic mechanicalproperties
BS ISO 6721-10:1999Complex shear viscosity using a parallel-plateoscillatory rheometer
PRI/21
BS ISO 7278:—Liquid hydrocarbons. Dynamic measurement.Proving systems for volumetric meters
BS ISO 7278-3:1998Pulse interpolation techniques
PTI/12
BS ISO 7635:2006Road vehicles. Air and air/hydraulic brakingsystems of motor vehicles, including those withelectronic control functions. Test procedures
AUE/11
BS ISO 8013:2006Rubber, vulcanized. Determination of creep incompression or shear
PRI/22
BS ISO 8036:2006Optics and photonics. Microscopes. Immersionliquids for light microscopy
CPW/172/5
BS ISO 8422:2006Sequential sampling plans for inspection byattributes
SS/5
BS ISO 9462:2006Alpine ski bindings. Requirements and testmethods
SW/136
BS ISO 2834:—Graphic technology. Laboratory preparation testprints
BS ISO 2834-1:2006Paste inks
PAI/43
BS ISO 2846:—Graphic technology. Colour and transparency ofprinting ink sets for four-colour printing
BS ISO 2846-1:2006Sheet-fed and heat-set web offset lithographicprinting
PAI/43
BS ISO 3334:2006Micrographics. ISO resolution test chart No 2.Description and use
IDT/1/1
BS ISO 4141:—Road vehicles. Multi-core connecting cables
BS ISO 4141-2:2006Test methods and requirements for highperformance sheathed cables
AUE/16
BS ISO 4141-3:2006Construction, dimensions and marking ofunscreened sheathed low-voltage cables
AUE/16
BS ISO 4161:1999Hexagon nuts with flange. Coarse thread
FME/9
BS ISO 4664:—Rubber, vulcanized or thermoplastic.Determination of dynamic properties
BS ISO 4664-2:2006Torsion pendulum methods at low frequencies
PRI/22
BS ISO 4665:2006Rubber, vulcanized or thermoplastic. Resistanceto weathering
PRI/22
BS ISO 4832:2006Microbiology of food and animal feeding stuffs.Horizontal method for the enumeration ofcoliforms. Colony-count technique
AW/9
DD ISO/TS 4869:—Acoustics. Hearing protectors
DD ISO/TS 4869-5:2006Method for estimation of noise reduction usingfitting by inexperienced test subjects
EH/1/1
BS ISO 5348:1998Mechanical vibration and shock. Mechanicalmounting of accelerometers
GME/21/2
BS EN ISO 22088-3:2006Bent strip method
PRI/21
BS EN ISO 22088-4:2006Ball or pin impression method
PRI/21
BS EN ISO 22478:2006Water quality. Determination of certainexplosives and related compounds. Methodusing high-performance liquid chromatography(HPLC) with UV detection
EH/3/2
BS EN ISO 22870:2006Point-of-care testing (POCT). Requirements forquality and competence
CH/212
BS EN ISO 23631:2006Water quality. Determination of dalapon,trichloroacetic acid and selected haloaceticacids. Method using gas chromatography (GC-ECD and/or GCMS detection) after liquid-liquid extraction and derivatization
EH/3/2
BS EN ISO 24013:2006Optics and photonics. Lasers and laser-relatedequipment. Measurement of phase retardationof optical components for polarized laserradiation
CPW/172
BS EN 26801:1993(ISO 6801:1983)Rubber or plastics hoses. Determination ofvolumetric expansion
PRI/66
BS EN 26891:1991(ISO 6891:1983)Timber structures. Joints made with mechanicalfasteners. General principles for thedetermination of strength and deformationcharacteristics
B/518
BS ISO 871:2006Plastics. Determination of ignition temperatureusing a hot-air furnace
PRI/26
BS ISO 1051:1999Rivet shank diameters
FME/9/3
BS ISO 1728:2006Road vehicles. Pneumatic braking connectionsbetween motor vehicles and towed vehicles.Interchangeability
AUE/11
BS ISO 2782:2006Rubber, vulcanized or thermoplastic.Determination of permeability to gases
PRI/22
Update Standards Apr 2009 Prices may be subject to change. 37
BS ISO 12642:—Graphic technology. Input data forcharacterization of 4-colour process printing
BS ISO 12642-2:2006Expanded data set
PAI/43
BS ISO 12647:—Graphic technology. Process control for theproduction of half-tone colour separations,proofs and production prints
BS ISO 12647-6:2006Flexographic printing
PAI/43
BS ISO 13215:—Road vehicles. Reduction of misuse risk of childrestraint systems
BS ISO 13215-1:2006Forms for field studies
AUE/7
BS ISO 13216:—Road vehicles. Anchorages in vehicles andattachments to anchorages for child restraintsystems
BS ISO 13216-1:1999Seat bight anchorages and attachments
AUE/7
BS ISO 13216-3:2006Classification of child restraint dimensions andspace in vehicle
AUE/7
BS ISO 13486:—Road vehicles. Hydraulic braking systems
BS ISO 13486-1:1999Double-flare pipes, tapped holes, male fittingsand tube seats
AUE/11
BS ISO 13715:2000Technical drawings. Edges of undefined shape.Vocabulary and indications
TDW/4
BS ISO 13740:1998Crude petroleum and petroleum products.Transfer accountability. Assessment of vesselexperience factor on loading (VEFL) and vesselexperience factor on discharging (VEFD) ofocean-going tanker vessels
PTI/12
BS ISO 14064:—Greenhouse gases
BS ISO 14064-1:2006Specification with guidance at the organizationlevel for quantification and reporting ofgreenhouse gas emissions and removals
SES/1/7
BS ISO 11359:—Plastics. Thermomechanical analysis (TMA)
BS ISO 11359-1:1999General principles
PRI/21
BS ISO 11359-2:1999Determination of coefficient of linear thermalexpansion and glass transition temperature
PRI/21
BS ISO 11424:1996Rubber hoses and tubing for air and vacuumsystems for internal-combustion engines.Specification
PRI/66
BS ISO 11425:1996Rubber hoses and hose assemblies forautomobile power-steering systems.Specification
PRI/66
BS ISO 11451:—Road vehicles. Vehicle test methods forelectrical disturbances from narrowbandradiated electromagnetic energy
BS ISO 11451-4:2006Bulk current injection (BCI)
AUE/16
BS ISO 11486:2006Motorcycles. Methods for setting the runningresistance on a chassis dynamometer
AUE/14
BS ISO 11884:—Optics and photonics. Minimum requirementsfor stereomicroscopes
BS ISO 11884-1:2006Stereomicroscopes for general use
CPW/172/5
BS ISO 11898:—Road vehicles. Controller area network (CAN)
BS ISO 11898-3:2006Low-speed, fault-tolerant, medium-dependentinterface
AUE/16
BS ISO 12161:2006Road vehicles. Endurance braking systems ofmotor vehicles and towed vehicles. Testprocedures
AUE/11
BS ISO 12637:—Graphic technology. Vocabulary
BS ISO 12637-1:2006Fundamental terms
PAI/43
BS ISO 10109:—Optics and photonics. Environmentalrequirements
BS ISO 10109-1:2006General overview, terms and definitions,climatic zones and their parameters
CPW/172
DD ISO/TS 10272:—Microbiology of food and animal feeding stuffs.Horizontal method for detection andenumeration of Campylobacter spp.
DD ISO/TS 10272-2:2006Colony-count technique
AW/9
BS ISO 10651:—Lung ventilators for medical use. Particularrequirements for basic safety and essentialperformance
BS ISO 10651-5:2006Gas-powered emergency resuscitators
CH/121/5
BS ISO 10766:2006Hydraulic fluid power. Cylinders. Housingdimensions for rectangular-sect bearing ringsfor pistons and rods
MCE/11
BS ISO 10817:—Rotating shaft vibration measuring systems
BS ISO 10817-1:1999Relative and absolute sensing of radial vibration
GME/21/2
BS ISO 11084:—Graphic technology. Register systems forphotographic materials, foils and paper
BS ISO 11084-2:2006Register pin systems for plate making
PAI/43
BS ISO 11345:2006Rubber. Assessment of carbon black and carbonblack/silica dispersion. Rapid comparativemethods
PRI/22
BS ISO 11357:—Plastics. Differential scanning calorimetry (DSC)
BS ISO 11357-2:1999Determination of glass transition temperature
PRI/21
BS ISO 11357-5:1999Determination of characteristic reaction-curvetemperatures and times, enthalphy of reactionand degree of conversion
PRI/21
British Standards Under Review continued...
38 Update Standards Apr 2009Prices may be subject to change.
BS ISO 16750:—Road vehicles. Environmental conditions andtesting for electrical and electronic equipment
BS ISO 16750-1:2006General
AUE/16
PD ISO/TR 16765:2003Comparison of worldwide safety standards onlifts for firefighters
MHE/4
BS ISO 16832:2006Acoustics. Loudness scaling by means ofcategories
EH/1/1
BS ISO 16833:2006Road vehicles. Wheels. Measurement of radialand lateral run-out
AUE/4
BS ISO 17356:—Road vehicles. Open interface for embeddedautomotive applications
BS ISO 17356-5:2006OSEK/VDX Network Management (NM)
AUE/16
BS ISO 17356-6:2006OSEK/VDX implementation language (OIL)
AUE/16
BS ISO 17734:—Determination of organonitrogen compoundsin air using liquid chromatography and massspectrometry
BS ISO 17734-1:2006Isocyanates using dibutylamine derivatives
EH/2/2
BS ISO 17734-2:2006Amines and aminoisocyanates usingdibutylamine and ethyl chloroformatederivatives
EH/2/2
BS ISO 18132:—Refrigerated light hydrocarbon fluids. Generalrequirements for automatic level gauges
BS ISO 18132-1:2006Gauges onboard ships carrying liquefied gases
PTI/12
BS ISO 18752:2006Rubber hoses and hose assemblies. Wire- ortextile-reinforced single pressure types forhydraulic applications. Specification
PRI/66
BS ISO 18813:2006Ships and marine technology. Survivalequipment for survival craft and rescue boats
SME/32/-/1
BS ISO 15040:1999Composites. Prepregs. Determination of geltime
PRI/42
BS ISO 15214:1998Microbiology of food and animal feeding stuffs.Horizontal method for the enumeration ofmesophilic lactic acid bacteria. Colony-counttechnique at 30°C
AW/9
BS ISO 15516:2006Ships and marine technology. Launchingappliances for davit-launched lifeboats
SME/32/-/4
DD ISO/TS 15666:2003Acoustics. Assessment of noise annoyance bymeans of social and socio-acoustic surveys
EH/1/3
BS ISO 15686:—Buildings and constructed assets. Service lifeplanning
BS ISO 15686-7:2006Performance evaluation for feedback of servicelife data from practice
B/500/3
BS ISO 15736:2006Ships and marine technology. Pyrotechnic life-saving appliances. Testing, inspection andmarking of production units
SME/32/-/1
BS ISO/IEC 16022:2006Information technology. Automaticidentification and data capture techniques.Data Matrix bar code symbology specification
IST/34
BS ISO 16063:—Methods for the calibration of vibration andshock transducers
BS ISO 16063-1:1998Basic concepts
GME/21/2
BS ISO 16063-11:1999Primary vibration calibration by laserinterferometry
GME/21/2
BS ISO 16063-15:2006Primary angular vibration calibration by laserinterferometry
GME/21/2
BS ISO 16172:2006Continuous hot-dip metallic-coated steel sheetfor corrugated steel pipe
ISE/10
BS ISO 14064-2:2006Specification with guidance at the project levelfor quantification, monitoring and reporting ofgreenhouse gas emission reductions or removalenhancements
SES/1/7
BS ISO 14064-3:2006Specifications with guidance for the validationand verification of greenhouse gas assertions
SES/1/7
BS ISO 14133:—Optics and optical instruments. Specificationsfor binoculars, monoculars and spotting scopes
BS ISO 14133-1:2006General purpose instruments
CPW/172
BS ISO 14133-2:2006High performance instruments
CPW/172
PD ISO/IEC TR 14143:—Information technology. Softwaremeasurement. Functional size measurement
PD ISO/IEC TR 14143-5:2004Determination of functional domains for usewith functional size measurement
IST/15
BS ISO 14520:—Gaseous fire-extinguishing systems. Physicalproperties and system design
BS ISO 14520-2:2006CF3I extinguishant
FSH/18/6
BS ISO 14572:2006Road vehicles. Round, screened and unscreened,60 V and 600 V multi-core sheathed cables. Testmethods and requirements for basic and high-performance cables
AUE/16
BS ISO 14849:1999Plastics. Phenol-formaldehyde mouldings.Determination of free ammonia andammonium compounds. Indophenol method
PRI/21
BS ISO 14898:1999Plastics. Polyurethane raw materials. Aromaticisocyanates. Determination of acidity
PRI/42
BS ISO 15034:2000Composites. Prepregs. Determination of resinflow
PRI/42
BS ISO 15038:1999Plastics. Organic-perester crosslinking agents forunsaturated-polyester thermosetting materials.Determination of active-oxygen content
PRI/42
Update Standards Apr 2009 Prices may be subject to change. 39
NEW WORK STARTED
The reference number of the committeeresponsible for each item of new workstarted is given after each entry.
Where a work item has the temporarydesignation “BS EN XXXX”, it has not yetbeen allocated a standard number by theEuropean standards body.
BS 4607:—Non-metallic conduits and fittings for electricalinstallations
BS 4607-1:1984/Amendment 1Specification for fittings and components ofinsulating material
PEL/213
BS 6089 (Revision)Guide to assessment of concrete strength inexisting structures
will supersede BS 6089:1981
B/517/1
BS 6349:—Maritime structures
BS 6349-4 (Revision)Code of practice for design of fendering andmooring systems
will supersede BS 6349-4:1994
CB/502
BS 7846 (Revision)Electric cables. 600/1000 V armoured fire-resistant cables having thermosetting insulationand low emission of smoke and corrosive gaseswhen affected by fire
will supersede BS 7846:2000
GEL/20/17
BS 7928:—Head and face protection for cricketers
BS 7928-2Specification for face protectors for cricketwicket-keepers
PH/6
BS 9572Water quality. Guide to risk assessments forLegionella control
EH/3/4
BS 25999:—Business continuity management
BS 25999-1 (Revision)Code of practice
will supersede BS 25999-1:2006
BCM/1
BS 25999-2 (Revision)Specification
will supersede BS 25999-2:2007
BCM/1
BS ISO 22892:2006Soil quality. Guidelines for the identification oftarget compounds by gas chromatography andmass spectrometry
EH/4
BS ISO 22896:2006Road vehicles. Deployment and sensor bus foroccupant safety systems
AUE/16
BS ISO 22902:—Road vehicles. Automotive multimedia interface
BS ISO 22902-1:2006General technical overview
AUE/16
BS ISO 22902-2:2006Use cases
AUE/16
BS ISO 22902-3:2006System requirements
AUE/16
BS ISO 22902-4:2006Network protocol requirements for vehicleinterface access
AUE/16
BS ISO 22902-5:2006Common message set
AUE/16
BS ISO 22902-6:2006Vehicle interface requirements
AUE/16
BS ISO 22902-7:2006Physical specification
AUE/16
BS ISO 23081:—Information and documentation. Recordsmanagement processes. Metadata for records
BS ISO 23081-1:2006Principles
IDT/2/17
BS ISO 23671:2006Passenger car tyres. Method for measuringrelative wet grip performance. Loaded newtyres
AUE/4
BS ISO 80000:—Quantities and units
BS ISO 80000-4:2006Mechanics
SS/7
BS AU 163a:1985(ISO 3583:1984)Specification for pressure test connection forcompressed-air pneumatic braking equipmentfor road vehicles
AUE/11
DD ISO/TS 19036:2006Microbiology of food and animal feeding stuffs.Guidelines for the estimation of measurementuncertainty for quantitative determinations
AW/9
BS ISO 20283:—Mechanical vibration. Measurement of vibrationon ships
BS ISO 20283-3:2006Pre-installation vibratory noise measurement ofshipboard equipment
GME/21/3
BS ISO 20652:2006Space data and information transfer systems.Producer-archive interface. Methodologyabstract standard
ACE/68/-/7
BS ISO 20653:2006Road vehicles. Degrees of protection (IP-Code).Protection of electrical equipment againstforeign objects, water and access
AUE/16
BS ISO 20828:2006Road vehicles. Security certificate management
AUE/16
BS ISO 21149:2006Cosmetics. Microbiology. Enumeration anddetection of aerobic mesophilic bacteria
CW/217
BS ISO 21509:2006Plastics and ebonite. Verification of Shoredurometers
PRI/21
BS ISO 21747:2006Statistical methods. Process performance andcapability statistics for measured qualitycharacteristics
SS/4
DD ISO/TS 21749:2005Measurement and uncertainty for metrologicalapplications. Repeated measurements andnested experiments
SS/6
BS ISO 22670:2006Space data and information transfer systems.Space link extension(SLE). Return-channel-frames service
ACE/68
BS ISO 22715:2006Cosmetics. Packaging and labelling
CW/217
BS ISO 22717:2006Cosmetics. Microbiology. Detection ofPseudomonas aeruginosa
CW/217
BS ISO 22718:2006Cosmetics. Microbiology. Detection ofStaphylococcus aureus
CW/217
British Standards Under Review continued...
40 Update Standards Apr 2009Prices may be subject to change.
DD CEN/TS 1187 (Revision)Test methods for external fire exposure to roofs
will supersede DD ENV 1187:2002
FSH/21/1
BS EN ISO 1518 (Revision)Paints and varnishes. Scratch test
will supersede BS EN ISO 1518:2001
STI/10
BS EN 1559:—Founding. Technical conditions of delivery
BS EN 1559-1 (Revision)General
will supersede BS EN 1559-1:1997
ISE/NFE/9
BS EN 1560Founding. Designation system for cast iron.Material symbols and material numbers
ISE/NFE/9
BS EN 1564Founding. Austempered ductile cast irons
ISE/NFE/9
PD CEN/TR 1594:—Office furniture. Office work chair
PD CEN/TR 1594-4Clarifications to EN 1335-1:2000 (Dimensions)
FW/0/3
BS EN 1674:2000/Amendment 1Food processing machinery. Dough and pastrybrakes. Safety and hygiene requirements
MCE/3/5
BS EN ISO 3218 (Revision)Essential oils. Principles of nomenclature
will supersede BS ISO 3218:1976
AW/54
PD CEN/TR 4654:—Aerospace series. Connector, electrical andoptical, rectangular, modular, rectangularinserts, EN 4644 specific products
PD CEN/TR 4654-001Technical specification
ACE/6
PD CEN/TR 4654-002Specification of performance and list oftechnical reports
ACE/6
PD CEN/TR 4654-003Inserts with PC tails electrical contacts. Technicalreport
ACE/6
PD CEN/TR 4654-0101Q18 connectors. Technical report
ACE/6
BS EN WI 00327075Animal feeding stuffs. Determination ofinorganic arsenic
AW/10
BS EN WI 00327076Animal feeding stuffs. Determination offluoride content after hydrochloric acidtreatment by ISE method
AW/10
BS EN WI 00327077Animal feeding stuffs. Determination ofsemduramicin
AW/10
BS EN WI 00327078Animal feeding stuffs. Determination ofdecoquinate by HPLC-Fluo
AW/10
BS EN WI 00327079Animal feeding stuffs. Determination of dioxinsand dioxin-like PCBs
AW/10
PD CEN/TR 115:—Safety of escalators and moving walks
PD CEN/TR 115-3Correlation between EN 115:1995 and itsamendments and EN 115-1:2008
MHE/4
BS EN ISO 544 (Revision)Welding consumables. Technical deliveryconditions for welding filler metals. Type ofproduct, dimensions, tolerances and markings
will supersede BS EN ISO 544:2003
WEE/39
BS EN ISO 676Spices and condiments. Botanical nomenclature
AW/7
BS EN 779 (Revision)Particulate air filters for general ventilation.Determination of the filtration performance
will supersede BS EN 779:2002
MCE/21/3
BS EN 806:—Specification for installations inside buildingsconveying water for human consumption
BS EN 806-5Operation and maintenance
B/504/2
BS EN ISO 939Spices and condiments. Determination ofmoisture content. Entrainment method
AW/7
BS EN ISO 948Spices and condiments. Sampling
will supersede BS 4540-1:1981
AW/7
BS EN 1057:2006/Amendment 2Copper and copper alloys. Seamless, roundcopper tubes for water and gas in sanitary andheating applications
NFE/34/1
BS EN WI 00256351Railway applications. Vehicle marking.Passenger coaches and locomotives
RAE/1
DD CEN/TS WI 00260079Fertilizers. Extraction of phosphorus soluble inmineral acids (Method 3.1.1)
CII/37
DD CEN/TS WI 00260082Fertilizers. Extraction of phosphorus which is soluble in neutral ammonium citrate (Method 3.1.4)
CII/37
DD CEN/TS WI 00260086Fertilizers. Extraction of water solublephosphorus (Method 3.1.6)
CII/37
DD CEN/TS WI 00260087Fertilizers. Determination of extractedphosphorus (Method 3.2)
CII/37
DD CEN/TS WI 00260090Fertilizers. Extraction of total calcium, totalmagnesium, total sodium and total sulfur in theforms of sulfates (Method 8.1)
CII/37
DD CEN/TS WI 00260092Fertilizers. Extraction of water-soluble calcium,magnesium, sodium and sulfur (in the forms ofsulfates) (Method 8.3)
CII/37
BS EN WI 00327069Animal feeding stuffs. Determination offumonisin B1 and B2
AW/10
BS EN WI 00327070Animal feeding stuffs. Determination ofochratoxin A
AW/10
BS EN WI 00327071Animal feeding stuffs. Determination of cyanideby HPLC
AW/10
BS EN WI 00327072Animal feeding stuffs. Determination of arsenicby hydride generation atomic absorptionspectrometry (HGAAS) after microwave pressuredigestion
AW/10
BS EN WI 00327073Animal feeding stuffs. Determination ofselenium by hydride generation atomicabsorption spectrometry (HGAAS) aftermicrowave digestion
AW/10
BS EN WI 00327074Animal feeding stuffs. Determination ofmercury by cold-vapour atomic absorptionspectrometry (CVAAS) after microwave pressuredigestion
AW/10
Update Standards Apr 2009 Prices may be subject to change. 41
DD CEN/TS 13307:—Laminated and finger jointed timber blanks andsemi-finished profiles for non-structural uses
DD CEN/TS 13307-2Production control
B/543
BS EN 13422:2004/Amendment 1Vertical road signs. Portable deformablewarning devices and delineators. Portable roadtraffic signs. Cones and cylinders
B/509/3
BS EN 13670 (Revision)Execution of concrete structures
will supersede DD ENV 13670-1:2000
B/525/2
BS EN 13683:2003/Amendment 2Garden equipment. Integrally poweredshredders/chippers. Safety
AGE/20
BS EN 13803:—Railway applications. Track. Track alignmentdesign parameters. Track gauges 1435 mm andwider
BS EN 13803-2:2006/Amendment 1Switches and crossings and comparablealignment design situations with abruptchanges of curvature
RAE/2
BS EN 13848:—Railway applications. Track. Track geometryquality
BS EN 13848-5:2008/Amendment 1Geometric quality levels
RAE/2
BS EN 14351:—Windows and doors. Product standard,performance characteristics
BS EN 14351-2Internal pedestrian doorsets without resistanceto fire and/or smoke leakage characteristics
B/538
BS EN 14846:2008/Amendment 1Building hardware. Locks and latches.Electromechanically operated locks and strikingplates. Requirements and test methods
B/538
BS EN 14879:—Organic coating systems and linings forprotection of industrial apparatus and plantsagainst corrosion caused by aggressive media
BS EN 14879-6Combined linings with tile and brick layers
ISE/16
BS EN 14910:2007/Amendment 1Garden equipment. Walk-behind combustionengine powered trimmers. Safety
AGE/20
BS EN 12312:—Aircraft ground support equipment. Specificrequirements
BS EN 12312-2:2002/Amendment 1Catering vehicles
ACE/57
BS EN 12312-5:2005/Amendment 1Aircraft fuelling equipment
ACE/57
BS EN 12369:—Wood-based panels. Characteristic values forstructural design
BS EN 12369-2 (Revision)Plywood
will supersede BS EN 12369-2:2004
B/541
BS EN 12390:—Testing hardened concrete
BS EN 12390-6 (Revision)Tensile splitting strength of test specimens
will supersede BS EN 12390-6:2000
B/517/1
BS EN 12816 (Revision)LPG equipment and accessories. Transportablerefillable LPG cylinders. Disposal
will supersede BS EN 12816:2001
PVE/19
DD CEN/TS 13001:—Cranes. General design
DD CEN/TS 13001-3-5Limit states and proof of competence of forgedhooks
MHE/3/1
BS EN 13109 (Revision)Liquefied petroleum gas equipment andaccessories. LPG tanks. Disposal
will supersede BS EN 13109:2002
PVE/19
BS EN 13282:—Hydraulic road binders
BS EN 13282-1 (Revision)Composition, specifications and conformitycriteria of rapid hardening hydraulic roadbinders
will supersede DD ENV 13282:2000
B/516/14
BS EN 13282-2 (Revision)Normal hardening hydraulic road binders.Composition, specifications and conformitycriteria of normal hardening hydraulic roadbinders
will supersede DD ENV 13282:2000
B/516/14
PD CEN/TR 4654-200Size 8 male quadrax contact pc tails. Technicalreport
ACE/6
BS EN ISO 9920 (Revision)Ergonomics of the thermal environment.Estimation of thermal insulation and watervapour resistance of a clothing ensemble
will supersede BS EN ISO 9920:2007
PH/9/1
BS EN 10051 (Revision)Hot-rolled strip and plate/sheet cut from widestrip of non-alloy and alloy steels. Tolerances ondimensions and shape
will supersede BS EN 10051:1991+A1:1997
ISE/73/2
BS EN ISO 11127:—Preparation of steel substrates beforeapplication of paints and related products. Testmethods for non-metallic blast-cleaningabrasives
BS EN ISO 11127-1 (Revision)Sampling
will supersede BS EN ISO 11127-1:1998
STI/21
BS EN 12101:—Smoke and heat control systems
BS EN 12101-2 (Revision)Specification for natural smoke and heatexhaust ventilators
will supersede BS EN 12101-2:2003
FSH/25
BS EN 12163 (Revision)Copper and copper alloys. Rod for generalpurposes
will supersede BS EN 12163:1998
NFE/34
BS EN 12164 (Revision)Copper and copper alloys. Rod for freemachining purposes
will supersede BS EN 12164:1998
NFE/34
BS EN 12165 (Revision)Copper and copper alloys. Wrought andunwrought forging stock
will supersede BS EN 12165:1998
NFE/34
BS EN 12167 (Revision)Copper and copper alloys. Profiles andrectangular bars for general purposes
will supersede BS EN 12167:1998
NFE/34
BS EN 12168 (Revision)Copper and copper alloys. Hollow rod for freemachining purposes
will supersede BS EN 12168:1998
NFE/34
New Work Started continued...
42 Update Standards Apr 2009Prices may be subject to change.
BS EN 60601:—Medical electrical equipment
BS EN 60601-2-63Particular requirements for basic safety andessential performance of dental X-rayequipment
CH/62/2
BS EN 60721:—Classification of environmental conditions
BS EN 60721-2-9Strategy for defining an environmentaldescription from measured data.Transportation. Vibration and shock
GEL/104
BS EN 60825:—Safety of laser products
BS EN 60825-4:2006/Amendment 2Laser guards
EPL/76
BS EN 61249:—Materials for printed boards and otherinterconnecting structures
BS EN 61249-2-41Reinforced based materials clad and unclad.Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of definedflammability (vertical burning test), copper-cladfor lead-free assembly
EPL/501
BS EN 61300:—Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures
BS EN 61300-3-46Measurement of Guide Pin Bore Diameter inMT Ferrules
GEL/86/2
BS EN 62236:—Railway applications. Electromagneticcompatibility
BS EN 62236-1General
will supersede BS EN 50121-1:2006
GEL/9
BS EN 62236-2Emission of the whole railway system to theoutside world
will supersede BS EN 50121-2:2006
GEL/9
BS EN 62236-3:—Rolling stock
BS EN 62236-3-1Train and complete vehicle
will supersede BS EN 50121-3-1:2006
GEL/9
DD CEN/TS 15941Sustainability of construction works.Environmental product declarations.Methodology and data for generic data
B/558
BS EN 15942Sustainability of construction works.Environmental product declarationscommunication format. Business to Business
B/558
PD CEN ISO/TR 18690Guidance for the selection, use andmaintenance of safety, protective andoccupational footwear
PH/1
BS EN ISO 20344 (Revision)Personal protective equipment. Test methodsfor footwear
will supersede BS EN ISO 20344:2004
PH/1
BS EN ISO 20345 (Revision)Personal protective equipment. Safety footwear
will supersede BS EN ISO 20345:2004
PH/1
BS EN ISO 20346 (Revision)Personal protective equipment. Protectivefootwear
will supersede BS EN ISO 20346:2004
PH/1
BS EN ISO 20347 (Revision)Personal protective equipment. Occupationalfootwear
will supersede BS EN ISO 20347:2004
PH/1
BS EN ISO 24034 (Revision)Welding consumables. Solid wires and rods forfusion welding of titanium and titanium alloys.Classification
will supersede BS EN ISO 24034:2005+A1:2008
WEE/39
BS EN ISO 26945 (Revision)Metallic and other inorganic coatings.Electrodeposited coatings of tin-cobalt alloy
will supersede BS ISO 26945:2008
STI/33
BS EN 50411:—Fibre organisers and closures to be used inoptical fibre communications systems. Productspecifications
BS EN 50411-2-9Non-sealed closures for air blown fibremicroduct cable, for category S & A
GEL/86/2
BS EN 14961:—Solid biofuels
BS EN 14961-1 (Revision)Fuel specifications and classes
will supersede DD CEN/TS 14961:2005
PTI/17
BS EN 15191Precast concrete products. Classification ofglass-fibre reinforced concrete performances
B/524
BS EN 15266:2007/Amendment 1Stainless steel pliable corrugated tubing kits inbuildings for gas with an operating pressure upto 0,5 bar
PSE/12
BS EN 15312:2007/Amendment 1Free access multi-sports equipment.Requirements, including safety, and testmethods
SW/136
PD CEN/TR 15932Plastics. Recommendation for terminology andcharacterization of bioplastics/biopolymers
PRI/21
BS EN 15933Soil, sludge and treated biowaste.Determination of pH
H/-/4
BS EN 15934Sludge, soil and treated biowaste.Determination of dry matter. Gravimetricmethod
H/-/4
BS EN 15935Sludge, soil and treated biowaste.Determination of loss on ignition
H/-/4
BS EN 15936Sludge, treated biowaste and soil.Determination of total organic carbon (TOC) bydry combustion
H/-/4
BS EN 15937Sludge, treated biowaste and soil.Determination of specific electrical conductivity
H/-/4
BS EN 15938Automotive fuels. Ethanol blending componentand ethanol (E85) fuel. Determination ofelectrical conductivity
PTI/2
BS EN 15939Hardware for furniture. Determination ofstrength and load capacity of wall attachmentdevices
FW/0/1
Update Standards Apr 2009 Prices may be subject to change. 43
BS ISO 13160Water quality. Measurement of strontium 90
EH/3
BS ISO 13194Box pallets. Principal requirements and testmethod
PKW/0/-/11
PD ISO/TR 13330Road vehicles. Calculation processes for theneck injury criteria in rear impact
AUE/7
BS ISO 13564:—Powered industrial trucks. Test methods forverification of visibility
BS ISO 13564-2Sit-on and stand-on operator trucks andvariable reach trucks greater than 10000 kgcapacity
MHE/7
BS ISO 13995 (Revision)Protective clothing. Mechanical properties. Testmethod for the determination of the resistanceto puncture and dynamic tearing of materials
will supersede BS EN ISO 13995:2001
PH/3/1
BS ISO 15524Pneumatic fluid power. Single rod short strokecylinders
MCE/18/-/3
BS ISO 17359 (Revision)Condition monitoring and diagnostics ofmachines. General guidelines
will supersede BS ISO 17359:2003
GME/21/7
BS ISO 20193Tobacco. Determination of cut width
AW/40
BS ISO 20471High-visibility warning clothing for professionaluse. Test methods and requirements
PH/3/12
BS ISO 22197:—Fine ceramics (advanced ceramics, advancedtechnical ceramics). Test method for air-purification performance of semiconductingphotocatalytic materials
BS ISO 22197-4Removal of formaldehyde
RPI/13
BS ISO 22197-5Removal of methyl mercaptan
RPI/13
BS ISO 11676Textile machinery and accessories. Pattern disksand pattern chains for warp knitting machines.Terminology and marking
TCI/33
BS ISO 11894:—Fine ceramic (advanced ceramics, advancedtechnical ceramics). Test method forconductivity measurement of ion-conductivefine ceramics
BS ISO 11894-1Oxide ion conducting solid electrolytes
RPI/13
BS ISO 12225Rolling bearings. Insert bearing units. Boundarydimensions
MCE/7
BS ISO 12404Soil quality. Guidance for the selection andapplication of screening methods
EH/4
BS ISO 12787Cosmetics. Analytical methods. Validationcriteria for analytical results
CW/217
BS ISO 12912Circular knitting machines. Vocabulary
TCI/33
BS ISO 13082Milk and milk products. Determination of thelipase activity and the preparation of pregastriclipase
AW/5
BS ISO 13123Testing method of cyclic heating for thermalbarrier coatings under temperature gradient
STI/41
BS ISO 13124Fine ceramics (advanced ceramics, advancedtechnical ceramics). Test method for interfacialbond strength of ceramic materials
RPI/13
BS ISO 13125Fine ceramics (advanced ceramics, advancedtechnical ceramics). Test method for antifungalactivity of semiconducting photocatalyticmaterials
RPI/13
BS ISO 13129Paints and varnishes. Electrochemicalmeasurement of the protection provided tosteel by paint coatings. Current interruptertechnique
STI/10
BS ISO 13138Air quality. Criteria for sampling according toparticle deposition in the human respiratorysystem
EH/2/2
BS EN 62236-3-2Apparatus
will supersede BS EN 50121-3-2:2006
GEL/9
BS EN 62236-4Emission and immunity of the signalling andtelecommunications apparatus
will supersede BS EN 50121-4:2006
GEL/9
BS EN 62236-5Emission and immunity of fixed power supplyinstallations and apparatus
will supersede BS EN 50121-5:2006
GEL/9
BS EN 62591Industrial communication networks.WirelessHart communication network andcommunication profile
AMT/7
BS ISO 129:—Technical drawings. Indication of dimensionsand tolerances
BS ISO 129-1 (Revision)General principles
will supersede BS ISO 129-1:2004
TDW/4
BS ISO 2575:2004/Amendment 2Road vehicles. Symbols for controls, indicatorsand tell-tales
AUE/12
BS ISO 3228Rolling bearings. Cast and pressed housings forinsert bearings
will supersede BS 6010-3:1994
MCE/7
BS ISO 4254:—Agricultural machinery. Safety
BS ISO 4254-13Large rotary mowers
AGE/32
BS ISO 4641 (Revision)Rubber hoses and hose assemblies for watersuction and discharge. Specification
will supersede BS EN ISO 4641:2008
PRI/66
BS ISO 7176:—Wheelchairs
BS ISO 7176-16 (Revision)Resistance to ignition of upholstered parts.Requirements and test methods
will supersede BS ISO 7176-16:1997
CH/173/1
BS ISO 11262 (Revision)Soil quality. Determination of total cyanide
will supersede BS ISO 11262:2003
EH/4
New Work Started continued...
44 Update Standards Apr 2009Prices may be subject to change.
BS 3HR 2Specification for Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets,bars, forgings and parts (Nickel base, Cr 19.5, Co 18.0, Ti2.5, Al 1.5)
ACE/61/-/48
BS 2HR 3Specification for Nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resistingalloy billets, bars, forgings and parts (Nickelbase, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2)
ACE/61/-/48
BS 2HR 4Specification for Nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resistingalloy billets, bars, forgings and parts (Nickelbase, Co 15, Cr 14.2, Al 5, Mo 4, Ti 4)
ACE/61/-/48
BS 2HR 5Specification for Nickel-chromium-titaniumheat-resisting alloy billets, bars, forgings andparts (Nickel base, Cr 19.5, Ti 0.4)
ACE/61/-/48
BS 2HR 6Specification for Nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resistingalloy billets, bars, forgings and parts (Nickelbase, Cr 21.7, Fe18.5, Mo 9, Co 1.5, W 0.6)
ACE/61/-/48
BS 2HR 10Specification for Nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resistingalloy billets, bars, forgings and parts (Nickelbase, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
ACE/61/-/48
BS 4HR 100Procedure for inspection, testing andacceptance of wrought heat resisting alloys
ACE/61/-/48
PAS 82Shopfitting Management System Specification
PAS 5308:—Control and instrumentation cables
PAS 5308-1Specification for polyethylene insulated cables
PAS 5308-2Specification for PVC insulated cables
BS IEC 62580-3Crew orientated services
GEL/9
BS IEC 62580-4Passenger orientated services
GEL/9
BS IEC 62580-5Train operator/maintainer orientated services
GEL/9
DD IEC/TS 62610:—Mechanical structures for electronic equipment.Thermal anagement for cabinets in accordancewit IEC 60297 and IEC 60917
DD IEC/TS 62610-1Design guide. Interface dimensions andprovisions for electrical advanced coolingsystems (Peltier effect)
EPL/48
DD IEC/TS 62610-2Design guide. Method for determination offorced air-cooling structure.
EPL/48
DD ISO/TS 13498Dentristry. Torsion test of implantbody/connecting part joints of endosseousdental implan systems
CH/106/8
PD 6682:—Aggregates
PD 6682-2 (Revision)Aggregates for bituminous mixtures andsurface treatments for roads, airfields and othertrafficked areas. Guidance on the use ofBS EN 13043
will supersede PD 6682-2:2003
B/502
BS 6S 100Procedure for inspection, testing andacceptance of wrought steels (other than plate,sheet, strip and tube)
will supersede BS 5S 100:1993
ACE/61
BS 4S 500Procedure for inspection, testing andacceptance of steel sheet and strip
will supersede BS 3S 500:1996
ACE/61
BS 5T 100Procedure for inspection, testing andacceptance of seamless steel tubes andtubestock
will supersede BS 4T 100:1997
ACE/61
BS 3HR 1Specification for Nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars,forgings and parts (Nickel base, Cr 19.5, Ti 2.2,Al 1.4)
ACE/61/-/48
BS ISO 22745:—Industrial automation systems and integration.Open technical dictionaries and theirapplication to master data
BS ISO 22745-1Overview and fundamental principles
AMT/4
BS ISO 22745-2Vocabulary
AMT/4
BS ISO 22745-11Guidelines for the formulation of terminology
AMT/4
BS ISO 22745-13Identification of concepts and terminology
AMT/4
BS ISO 22745-20Procedures for the maintenance of an opentechnical dictionary
AMT/4
BS ISO 28704Fine ceramics (advanced ceramics, advancedtechnical ceramics). Test method for cyclicbending fatigue of porous ceramics at roomtemperature
RPI/13
DD ISO/TS 29002:—Industrial automation systems and integration.Exchange of characteristic data
DD ISO/TS 29002-4Basic data
AMT/4
BS ISO 29383Terminology policies. Development andimplementation
TS/1
PD IEC/TR 62343:—Dynamic modules. Technical reports
PD IEC/TR 62343-6-2Software and hardware interface of dynamicmodules
GEL/86/3
BS IEC 62580:—Railways applications. Onboard multimediasystems for railway
BS IEC 62580-1General architecture
GEL/9
BS IEC 62580-2Video surveillance/CCTV services
GEL/9
Update Standards Apr 2009 Prices may be subject to change. 45
your order
DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –ADOPTIONS
All Draft British Standards are availablefrom BSI Customer Services (see ’How toorder’ on page 2)
Most drafts are charged at£10.00 to members and£20.00 to non-members.
Larger draft documents are charged at ahigher price according to the number ofpages and are priced individually below.
Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL by 31 May, 2009 unlessotherwise stated, to be considered by therelevant BSI committee.
Draft standards may be modified beforeadoption and issue as British Standards.
09/30125465 DCBS ISO 8769 Reference sources. Calibration ofsurface contamination monitors. Alpha-, beta-and photon emitters
NCE/2
09/30142058 DCBS ISO/IEC 13249-7 Information technology.Database languages. SQL multimedia andapplication packages. Part 7. History£18.00 members, £36.00 non-members
IST/40
Comments for the above document are required by24 April, 2009
09/30146978 DCBS ISO 21338 Water quality. Kineticdetermination of the inhibitory effects ofsediment, other solids and coloured samples onthe light emission of Vibrio fischeri (kineticluminescent bacteria test)
EH/3/5
09/30159969 DCBS EN 408 Timber structures. Structural timberand glued laminated timber. Determination ofsome physical and mechanical properties
B/518
Comments for the above document are required by30 June, 2009
09/30166458 DCBS ISO 10893-1 Non-destructive testing of steeltubes. Part 1. Automated electromagnetictesting of seamless and welded (exceptsubmerged arc-welded) steel tubes for theverification of hydraulic leak-tightness insteadof the hydrostatic test
ISE/73/1
09/30166461 DCBS ISO 10893-2 Non-destructive testing of steeltubes. Part 2. Automated eddy current testingof seamless and welded (except submerged arc-welded) steel tubes for the detection ofimperfections
ISE/73/1
09/30180590 DCBS 8507-2 Code of practice for close protectionservices. Part 2. Operations outside the UnitedKingdom
GW/3
09/30190878 DCBS 1134-2 Assessment of surface texture. Part 2.Guidance and general information
TDW/4
Comments for the above document are required by30 June, 2009
09/30191208 DCBS 1134-1 Assessment of surface texture. Part 1.Methods and instrumentation
TDW/4
Comments for the above document are required by30 June, 2009
09/30196055 DCBS 8901 Specification for a sustainabilitymanagement system for events
SDS/1
09/30200283 DCBS 7996 Torque measuring devices. Calibrationand classification using continual torqueapplication. Method
IS/NFE/4
09/30200315 DCBS 6465-1 AMD1 Sanitary installations. Part 1.Code of practice for the design of sanitaryfacilities and scales of provision of sanitary andassociated appliances
B/209
Comments for the above document are required by30 April, 2009
DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –NATIONAL BRITISHSTANDARDS
You may now comment on any NationalBritish Standard online. BSI BritishStandards has launched a Draft Reviewsystem which allows access to the draftsof all National British Standards. Toenhance access of Drafts for PublicComment for the wider community, makecomments more visible and move intocollaborative working practices, you willnow be able to comment on any NationalBritish Standard by visitinghttp://www.bsigroup.com/drafts. Allyou need to do is register. This service isfree of charge.
Please note that the only standardsavailable on this service are pure BritishStandards (National Standards e.g:BS XXXX). European and internationaldocuments are not included at this time.
Deadlines for receipt of comments oneach of the individual drafts can be foundat http://www.bsigroup.com/drafts.The deadline for the following drafts is31 May, 2009 unless otherwise stated.
Should you wish to receive these drafts inhard copy format, they are available for afee from BSI Customer Services (see ’Howto order’ on page 2).
09/30128274 DCNA to BS EN 1997-2 UK National Annex toEurocode 7. Geotechnical design. Part 2.Ground investigation and testing
B/526
09/30129886 DCNA to BS EN 1993-3-1 UK National Annex toEurocode 3. Design of steel structures. Part 3-1.Towers, masts and chimneys. Towers and masts
B/525/32
09/30137917 DCBS 7533-10 AMD1 Pavements constructed withclay, natural stone or concrete pavers. Part 10.Guide for the structural design of traffickedpavements constructed of natural stone setts orconcrete paving blocks
B/507
09/30180415 DCNA to BS EN 1992-1-1 AMD1 UK NationalAnnex to Eurocode 2. Design of concretestructures. Part 1-1. General rules and rules forbuildings
B/525/2
Draft British Standards for Public Comment
46 Update Standards Apr 2009Prices may be subject to change.
Help Us to Help
You!
Always quote your Customer Number
Don’t know your number?
Contact Customer Services
020 8996 9001
who will be happy to check it for you
09/30174004 DCBS ISO 13720 Meat and meat products.Enumeration of presumptive Pseudomonas spp.
AW/9
Comments for the above document are required by8 June, 2009
09/30174294 DCBS EN ISO 24444 Cosmetics. Sun protection testmethods. in vivo determination of SPF (SunProtection Factor)
CW/217
Comments for the above document are required by30 April, 2009
09/30175027 DCBS ISO 14934-1 Fire tests. Calibration and use ofheat-flux meters. Part 1. General principles
FSH/21
09/30175700 DCBS EN 60601-2-46 Medical electrical equipment.Part 2-46. Particular requirements for basicsafety and essential performance of operatingtables
CH/62/4
Comments for the above document are required by30 April, 2009
09/30175758 DCBS ISO 28238 Compression and injectionmoulds. Components for gating systems.Vocabulary
MTE/12
09/30175820 DCBS ISO 22621-5 Plastics piping systems for thesupply of gaseous fuels for maximum operatingpressures up to and including 2 MPa (20 bar).Polyamide (PA). Part 5. Fitness for purpose ofthe system
PRI/88/2
09/30177189 DCBS ISO 10225 Gas welding equipment. Markingfor equipment used for gas welding, cuttingand allied processes
WEE/18
Comments for the above document are required by30 June, 2009
09/30177728 DCBS ISO 4513 Road vehicles. Visibility. Method forestablishment of eyellipses for driver’s eyelocation
AUE/12
09/30178013 DCBS EN 1012-2 AMD1 Compressors and vacuumpumps. Safety requirements. Part 2. Vacuumpumps
MCE/8/-/4
09/30178328 DCBS EN 1870-6 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 6.Circular sawing machines for firewood and dualpurpose circular sawing machines forfirewood/circular saw benches, with manualloading and/or unloading
MTE/23
09/30168887 DCBS EN 60601-2-25 Medical electrical equipment.Part 2-25. Particular requirements for basicsafety and essential performance ofelectrocardiographs£18.00 members, £36.00 non-members
CH/62/4
09/30168905 DCBS ISO 28158 Dentistry. Integrated dental flossholders
CH/106/7
09/30168908 DCBS ISO 28319 Dentistry. Laser welding
CH/106/2
09/30169314 DCBS EN 60601-2-27 Medical electrical equipment.Part 2-27. Particular requirements for basicsafety and essential performance ofelectrocardiographic monitoring equipment
CH/62/4
Comments for the above document are required by29 April, 2009
09/30169318 DCBS EN 60601-2-34 Medical electrical equipment.Part 2-34. Particular requirements for basicsafety and essential performance of invasiveblood pressure monitoring equipment
CH/62/4
09/30169326 DCBS EN 60601-2-49 Medical electrical equipment.Part 2-49. Particular requirements for basicsafety and essential performance ofmultifunction patient monitoring equipment
CH/62/4
09/30169722 DCBS ISO 18911 Imaging materials. Processedsafety photographic films. Storage practices
CPW/42
09/30169960 DCBS ISO 22840 Intelligent transport systems.Devices to aid reverse manoeuvres. Extendedrange backing aid systems (ERBA)
EPL/278
09/30172484 DCBS EN 60601-2-23 Medical electrical equipment.Part 2-23. Particular requirements for basicsafety and essential performance oftranscutaneous partial pressure monitoringequipment
CH/62/4
09/30173348 DCBS ISO 11639 Aerospace. Part numbering forhose assemblies
ACE/69
09/30173454 DCBS EN 61881-1 Railway applications. Rollingstock equipment. Capacitors for powerelectronics. Part 1. Requirements, tests andgeneral information
GEL/9/2
09/30166464 DCBS ISO 10893-3 Non-destructive testing of steeltubes. Part 3. Automated full peripheral fluxleakage testing of seamless and welded (exceptsubmerged arc-welded) ferromagnetic steeltubes for the detection of longitudinal and/ortransversal imperfections
ISE/73/1
09/30166467 DCBS ISO 10893-4 Non-destructive testing of steeltubes. Part 4. Liquid penetrant inspection ofseamless and welded steel tubes for thedetection of surface imperfections
ISE/73/1
09/30166470 DCBS ISO 10893-5 Non-destructive testing of steeltubes. Part 5. Magnetic particle inspection ofseamless and welded ferromagnetic steel tubesfor the detection of surface imperfections
ISE/73/1
09/30166473 DCBS ISO 10893-6 Non-destructive testing of steeltubes. Part 6. Radiographic testing of the weldseam of welded steel tubes for the detection ofimperfections
ISE/73/1
09/30166476 DCBS ISO 10893-7 Non-destructive testing of steeltubes. Part 7. Digital radiographic testing of theweld seam of welded steel tubes for thedetection of imperfections
ISE/73/1
09/30166479 DCBS ISO 10893-8 Non-destructive testing of steeltubes. Part 8. Automated ultrasonic testing ofseamless and welded steel tubes for thedetection of laminar imperfections
ISE/73/1
09/30166482 DCBS ISO 10893-9 Non-destructive testing of steeltubes. Part 9. Automated ultrasonic testing forthe detection of laminar imperfections instrip/plate used for the manufacture of weldedsteel tubes
ISE/73/1
09/30166485 DCBS ISO 10893-10 Non-destructive testing of steeltubes. Part 10. Automated full peripheralultrasonic testing of seamless and welded(except submerged arc-welded) steel tubes forthe detection of longitudinal and/or transversalimperfections
ISE/73/1
09/30166488 DCBS ISO 10893-11 Non-destructive testing of steeltubes. Part 11. Automated ultrasonic testing ofweld seam of welded steel tubes for thedetection of longitudinal and/or transversalimperfections
ISE/73/1
09/30166492 DCBS ISO 10893-12 Non-destructive testing of steeltubes. Part 12. Automated full peripheralultrasonic thickness testing of seamless andwelded (except submerged arc-welded) steeltubes
ISE/73/1
Update Standards Apr 2009 Prices may be subject to change. 47
09/30181772 DCBS EN 1837 AMD1 Safety of machinery. Integrallighting of machines
CPL/34/10
09/30182170 DCBS EN 12978 AMD1 Industrial, commercial andgarage doors and gates. Safety devices forpower operated doors and gates. Requirementsand test methods
B/538/5
Comments for the above document are required by3 April, 2009
09/30183113 DCBS EN 81-7 Safety rules for the construction andinstallation of lifts. Part 7. Rack and pinion lifts
MHE/4
09/30183454 DCBS EN 1870-14 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 14.Vertical panel sawing machines
MTE/23
Comments for the above document are required by5 June, 2009
09/30185830 DCBS EN 15887 Building hardware. UncontrolledDoor Closing Devices for single action doors.Requirements and test methods
B/538/4
09/30185903 DCBS EN 14232 Advanced technical ceramics.Terms, definitions and abbreviations£18.00 members, £36.00 non-members
RPI/13
09/30185965 DCBS EN 14566 AMD1 Mechanical fasteners forgypsum plasterboard systems. Definitions,requirements and test methods
B/544/2
09/30185968 DCBS EN 15283-1 AMD1 Gypsum boards withfibrous reinforcement. Definitions,requirements and test methods. Part 1. Gypsumboards with mat reinforcement
B/544/2
Comments for the above document are required by17 April, 2009
09/30185971 DCBS EN 15283-2 AMD1 Gypsum boards withfibrous reinforcement. Definitions,requirements and test methods. Part 2. Gypsumfibre boards
B/544/2
Comments for the above document are required by17 April, 2009
09/30185974 DCBS EN 520 AMD1 Gypsum plasterboards.Definitions, requirements and test methods
B/544/2
Comments for the above document are required by21 April, 2009
09/30178949 DCBS ISO 4802-2 Glassware. Hydrolytic resistanceof the interior surfaces of glass containers. Part 2. Determination by flame spectrometryand classification
CH/212
Comments for the above document are required by30 June, 2009
09/30179503 DCBS ISO 29301 Microbeam analysis. Analyticaltransmission electron microscopy. Methods forcalibrating image magnification by usingreference materials giving a periodic diffractionpattern
CII/9
09/30179909 DCBS ISO 22155 Soil quality. Gas chromatographicdetermination of volatile aromatic andhalogenated hydrocarbons and selected ethers.Static headspace method
EH/4
09/30180383 DCBS EN 61162-450 Maritime navigation andradiocommunication equipment and systems.Digital interfaces. Part 450. Multiple talkers andmultiple listeners. Lightweight ship systemsinterconnection
EPL/80
09/30180587 DCBS ISO/IEC 24724 Information technology.Automatic identification and data capturetechniques. GS1 DataBar bar code symbologyspecification
IST/34
09/30181274 DCBS ISO 10681-1 Road vehicles. Communicationon FlexRay. Part 1. General requirements anduse case definitions
AUE/16
09/30181277 DCBS ISO 10681-2 Road vehicles. Communicationon FlexRay. Part 2. Communication layer services
AUE/16
09/30181333 DCBS ISO 22621-6 Plastics piping systems for thesupply of gaseous fuels for maximum operatingpressures up to and including 2 MPa (20 bar).Polyamide (PA). Part 6. Code of practice fordesign, handling and installation
PRI/88/2
09/30181599 DCBS EN 62386-210 Digital addressable lightinginterface. Part 210. Particular requirements forcontrol gears. Sequencer (device type 9)
CPL/34/3
09/30181661 DCBS EN 13035-3 AMD1 Machines and plants forthe manufacture, treatment and processing offlat glass. Safety requirements. Part 3. Cuttingmachines
MCE/3/13
09/30178337 DCBS EN 1870-9 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 9.Double blade circular sawing machines forcross-cutting with integrated feed and withmanual loading and/or unloading
MTE/23
09/30178340 DCBS EN 1870-10 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 10.Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
MTE/23
09/30178343 DCBS EN 1870-11 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 11.Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radialarm saws)
MTE/23
09/30178346 DCBS EN 1870-12 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 12.Pendulum cross-cut sawing machines
MTE/23
09/30178349 DCBS EN 1870-15 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 15.Multiblade cross-cut sawing machines withintegrated feed of the workpiece and manualloading and/or unloading
MTE/23
Comments for the above document are required by5 June, 2009
09/30178353 DCBS EN 1870-16 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 16.Double mitre sawing machines for V-cutting
MTE/23
Comments for the above document are required by5 June, 2009
09/30178356 DCBS EN 1870-17 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 17.Manual horizontal cutting cross-cut sawingmachines with one saw unit (manual radial armsaws)
MTE/23
Comments for the above document are required by5 June, 2009
09/30178813 DCBS EN 1870-13 AMD1 Safety of woodworkingmachines. Circular sawing machines. Part 13.Horizontal beam panel sawing machines
MTE/23
09/30178946 DCBS ISO 4802-1 Glassware. Hydrolytic resistanceof the interior surfaces of glass containers. Part1. Determination by titration method andclassification
CH/212
Comments for the above document are required by30 June, 2009
Draft British Standards for Public Comment continued...
48 Update Standards Apr 2009Prices may be subject to change.
09/30192137 DCBS ISO/IEC 14496-4 AMD37 Informationtechnology. Coding of audio-visual objects. Part 4. Conformance testing
IST/37
09/30192141 DCBS ISO/IEC 14496-5 AMD25 Informationtechnology. Coding of audio-visual objects. Part 5. Reference software
IST/37
Comments for the above document are required by30 June, 2009
09/30192146 DCBS ISO/IEC 14496-15 AMD3 Informationtechnology. Coding of audio-visual objects. Part 15. Advanced Video Coding (AVC) fileformat
IST/37
Comments for the above document are required by30 June, 2009
09/30192807 DCBS ISO 7919-2 Mechanical vibration. Evaluationof machine vibration by measurements onrotating shafts. Part 2. Land-based steamturbines and generators in excess of 50 MWwith normal operating speeds of 1500 r/min,1800 r/min, 3000 r/min and 3600 r/min
GME/21/5
Comments for the above document are required by15 May, 2009
09/30193296 DCBS EN 15518-1 Winter maintenance equipment.Road weather information systems. Part 1.Global definitions and components
B/513
09/30193299 DCBS EN 15518-2 Winter maintenance equipment.Road weather information systems. Part 2. Roadweather. Recommended observation andforecast
B/513
09/30193302 DCBS EN 15518-3 Winter maintenance equipment.Road weather information systems. Part 3.Requirements on measured values of stationaryequipments
B/513
09/30193656 DCBS ISO 28564-1 Public information guidancesystems. Part 1. Design principles and elementrequirements for location plans, maps anddiagrams
PH/8/2
09/30193867 DCBS EN ISO 16409 AMD1 Dentistry. Oral hygieneproducts. Manual interdental brushes
CH/106/7
09/30194066 DCBS ISO 11839 Machinery for forestry. Glazingand panel materials used in operator enclosuresfor protection against thrown objects. Testmethod and performance criteria
AGE/29
09/30189791 DCBS EN 61300-3-44 Fibre optic interconnectingdevices and passive components. Basic test andmeasurement procedures. Part 3-44.Examinations and measurements. Fibre opticreceptacle connector endface visual andautomated inspection
GEL/86/2
Comments for the above document are required by13 April, 2009
09/30189796 DCBS EN 61300-3-45 Fibre optic interconnectingdevices and passive components. Basic test andmeasurement procedures. Part 3-45.Examinations and measurements. Attenuationof random mated multi-fibre connectors
GEL/86/2
Comments for the above document are required by13 April, 2009
09/30190333 DCBS EN 61400-24 Wind turbines. Part 24.Lightning protection£18.00 members, £36.00 non-members
PEL/88
09/30190431 DCBS EN 61190-1-3 AMD1 Attachment materialsfor electronic assembly. Part 1-3. Requirementsfor electronic grade solder alloys and fluxedand non-fluxed solid solder for electronicsoldering applications
EPL/501
09/30191398 DCBS EN 61169-18 Radio-frequency connectors.Part 18. Sectional specification. Radio frequencycoaxial connectors of type SSMA
EPL/46/2
09/30191414 DCBS EN 61169-19 Radio-frequency connectors.Part 19. Sectional specification. Radio frequencycoaxial connectors of type SSMB
EPL/46/2
09/30191428 DCBS EN 61169-41 Radio-frequency connectors.Part 41. Sectional specification for CQA seriesquick lock R.F. coaxial connectors
EPL/46/2
09/30191615 DCBS ISO 4000-1 Passenger car tyres and rims. Part 1. Tyres (metric series)
AUE/4
09/30191644 DCBS ISO 8820-4 Road vehicles. Fuse-links. Part 4.Fuse-links with female contacts (type A) andbolt-in contacts (type B) and their test fixtures
AUE/16
09/30192130 DCBS ISO/IEC 13818-1 AMD4 Informationtechnology. Part 1. Generic coding of movingpictures and audio. Systems
IST/37
Comments for the above document are required by17 June, 2009
09/30186600 DCBS EN 13381-1 Test methods for determiningthe contribution to the fire resistance ofstructural members. Part 1. Horizontalprotective membranes
FSH/22
09/30187529 DCBS EN 14492-1 AMD1 Cranes. Power drivenwinches and hoists. Part 1. Power drivenwinches
MHE/3
09/30187532 DCBS EN 14492-2 AMD1 Cranes. Power drivenwinches and hoists. Part 2. Power driven hoists
MHE/3
09/30187605 DCBS ISO/IEC 14496-20 AMD2 Informationtechnology. Coding of audio-visual objects. Part 20. Lightweight Application SceneRepresentation (LASeR) and SimpleAggregation Format (SAF)
IST/37
Comments for the above document are required by30 June, 2009
09/30187607 DCBS ISO/IEC 23000-9 AMD1 Informationtechnology. Multimedia application format(MPEGA). Part 9. Digital MultimediaBroadcasting application format
IST/37
09/30187712 DCBS EN 81-1 AMD3 Safety rules for theconstruction and installation of lifts. Part 1.Electric lifts
MHE/4
09/30187715 DCBS EN 81-2 AMD3 Safety rules for theconstruction and installation of lifts. Part 2.Hydraulic lifts
MHE/4
09/30189092 DCBS EN 60297-3-106 Mechanical structures forelectronic equipment. Dimensions ofmechanical structures of the 482,6 mm (19 in)series. Part 3-106. Adaptation dimensions forsubracks and chassis applicable with metriccabinets or racks in accordance with IEC 60917-2-1
EPL/48
09/30189100 DCBS EN 60917-2-4 Modular order for thedevelopment of mechanical structures forelectronic equipment practices. Part 2-4.Sectional specification. Interface coordinationdimensions for the 25 mm equipment practice.Adaptation dimensions for subracks or chassisapplicable in cabinets or racks in accordancewith IEC 60297-3-100 (19 in)
EPL/48
09/30189153 DCBS ISO/IEC 14496-5 AMD15 Informationtechnology. Coding of audio-visual objects. Part 5. Reference software
IST/37
Comments for the above document are required by30 June, 2009
Update Standards Apr 2009 Prices may be subject to change. 49
09/30198124 DCBS ISO 13263 Thermoplastics piping systems fornon-pressure underground drainage andsewerage. Thermoplastics fittings. Test methodfor impact strength
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30198127 DCBS ISO 13264 Thermoplastics piping systems fornon-pressure underground drainage andsewerage. Thermoplastics fittings. Test methodfor mechanical strength or flexibility offabricated fittings
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30198133 DCBS ISO 13266 Thermoplastics piping systems fornon-pressure underground drainage andsewerage. Thermoplastics shafts or risers forinspection chambers and manholes.Determination of resistance against surface andtraffic loading
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30198136 DCBS ISO 13267 Thermoplastics piping systems fornon-pressure underground drainage andsewerage. Thermoplastics inspection chamberand manhole bases. Test method for bucklingresistance
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30198143 DCBS ISO 13268 Thermoplastics piping systems fornon-pressure underground drainage andsewerage. Thermoplastics shafts or risers forinspection chambers and manholes.Determination of ring stiffness
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30198190 DCBS ISO 13229 Thermoplastics piping systems fornon-pressure applications. Unplasticizedpoly(vinyl chloride) (PVC-U) pipes and fittings.Determination of the viscosity number and K-value
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30198193 DCBS ISO 13254 Thermoplastics piping systems fornon-pressure applications. Test method forwatertightness
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30198196 DCBS ISO 13255 Thermoplastics piping systems forsoil and waste discharge inside buildings. Testmethod for airtightness of joints
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30194990 DCBS EN ISO 105-E09 Textiles. Tests for colourfastness. Part E09. Colour fastness to boilingwater
TCI/81
Comments for the above document are required by30 June, 2009
09/30194996 DCBS EN ISO 105-E03 Textiles. Tests for colourfastness. Part E03. Colour fastness tochlorinated water (swimming-pool water)
TCI/81
Comments for the above document are required by30 June, 2009
09/30195283 DCBS EN 15908 Anaesthetic and respiratoryequipment. Non-interchangeable screw-threaded (NIST) low-pressure connectors formedical gases
CH/121/6
09/30195327 DCBS EN ISO 7396-1 AMD2 Medical gas pipelinesystems. Part 1. Pipeline systems for compressedmedical gases and vacuum
CH/121/6
09/30195759 DCBS ISO 11704 Water quality. Measurement ofgross alpha and beta activity concentration innon-saline water. Liquid scintillation countingmethod
EH/3
Comments for the above document are required by30 June, 2009
09/30195765 DCBS ISO 8970 Timber structures. Testing of jointsmade with mechanical fasteners. Requirementsfor wood density
B/518
Comments for the above document are required by30 June, 2009
09/30196057 DCBS ISO 15779 Condensed-aerosol fire-extinguishing systems. Physical properties andsystem design. General requirements
FSH/18/6
09/30196766 DCBS ISO 23269-4 Ships and marine technology.Breathing apparatus for ships. Part 4. Self-contained breathing apparatus for emergencyescape required by the IMO IBC and IGC Codes
SME/32/-/1
09/30198118 DCBS ISO 13260 Thermoplastics piping systems fornon-pressure underground drainage andsewerage. Test method for resistance tocombined temperature cycling and externalloading
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30198121 DCBS ISO 13262 Thermoplastics piping systems fornon-pressure underground drainage andsewerage. Thermoplastics spirally-formedstructured-wall pipes. Determination of thetensile strength of a seam
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30194083 DCBS EN 15900 Energy efficiency services.Definitions and essential requirements
SEM/1
09/30194273 DCBS EN 62208 Empty enclosures for low-voltageswitchgear and controlgear assemblies. Generalrequirements
PEL/17/3
09/30194345 DCBS EN 61386-25 Conduit systems for cablemanagement. Part 25. Particular requirements.Conduit fixing devices
PEL/213
Comments for the above document are required by13 April, 2009
09/30194526 DCBS EN 15331 Criteria for design, managementand control of maintenance services forbuildings
DS/1
09/30194529 DCBS EN 15429-2 Sweepers. Part 2. Performancerequirements and test methods
B/513
09/30194902 DCBS EN 12697-47 Bituminous mixtures. Testmethods for hot mix asphalt. Part 47.Determination of the ash content of lakeasphalt
B/510/1
09/30194905 DCBS EN 15905 Fertilizers. Determination of 3-methylpyrazole (MP) using high-performanceliquid chromatography (HPLC)
CII/37
09/30194908 DCBS EN 15904 Glass packaging. Standardtolerances for flaconnage
PKW/0/-/7
09/30194911 DCBS EN 14634 Glass packaging. 26 H 180 crownfinish. Dimensions
PKW/0/-/7
09/30194915 DCBS EN 14635 Glass packaging. 26 H 126 crownfinish. Dimensions
PKW/0/-/7
Comments for the above document are required by30 June, 2009
09/30194984 DCBS EN ISO 105-E01 Textiles. Tests for colourfastness. Part E01. Colour fastness to water
TCI/81
Comments for the above document are required by30 June, 2009
09/30194987 DCBS EN ISO 105-E07 Textiles. Tests for colourfastness. Part E07. Colour fastness to spottingby water
TCI/81
Comments for the above document are required by30 June, 2009
Draft British Standards for Public Comment continued...
50 Update Standards Apr 2009Prices may be subject to change.
09/30199821 DCBS EN 2267-002 Aerospace series. Cables,electrical, for general purpose. Operatingtemperatures between -55°C and 260°C. Part 002. General
ACE/6/-/2
Comments for the above document are required by1 May, 2009
09/30199926 DCBS EN 3155-026 Aerospace series. Electricalcontacts used in elements of connection. Part026. Contacts, electrical, male, type A, crimp,class R. Product standard
ACE/6
Comments for the above document are required by12 May, 2009
09/30199941 DCBS EN 61010-2-091 Safety requirements forelectrical equipment for measurement, controland laboratory use. Part 2-091. Requirementsfor cabinet x-ray systems
EPL/66
Comments for the above document are required by15 April, 2009
09/30199945 DCBS EN 61010-2-092 Safety requirements forelectrical equipment for measurement, controland laboratory use. Part 2-092. Particularrequirements for equipment rated for use bychildren and young people in educationalestablishments
EPL/66
Comments for the above document are required by15 April, 2009
09/30199949 DCBS EN 60461 Time and control code (TA6)
EPL/100
09/30199968 DCBS EN 62040-3 AMD1 Uninterruptible powersystems (UPS). Part 3. Method of specifying theperformance and test requirements
PEL/22
09/30199993 DCBS EN 61076-2 Connectors for electronicequipment. Product requirements. Part 2.Circular connectors. Sectional specification
EPL/48
Comments for the above document are required by15 April, 2009
09/30199997 DCBS EN 61076-2-001 Connectors for electronicequipment. Product requirements. Part 2-001.Circular connectors. Blank detail specification
EPL/48
Comments for the above document are required by15 April, 2009
09/30200025 DCBS ISO 11784 AMD2 Radio frequencyidentification of animals. Code structure
AGE/6/1
09/30200098 DCBS EN 50395 AMD1 Electrical test methods forlow voltage energy cables
GEL/20/17
09/30199557 DCBS ISO 15686-10 Buildings and constructedassets. Service life planning. Part 10. When toassess functional performance
B/500/3
09/30199571 DCBS EN 60335-2-60 AMD Household and similarelectrical appliances. Safety. Part 2-60. Particularrequirements for whirlpool baths and whirlpoolspas
CPL/61/07
09/30199583 DCBS EN 62059-32-1 Electricity meteringequipment. Dependability. Part 32-1. Durability.Testing of the stability of metrologicalcharacteristics by applying elevatedtemperature
PEL/13
09/30199592 DCBS EN 62489-2 Electroacoustics. Audio-frequency induction loop systems for assistedhearing. Part 2. Methods of calculating andmeasuring the low-frequency magnetic fieldemissions from the loop for assessingconformity with guidelines on limits for humanexposure
EPL/29
09/30199704 DCBS EN 60862-2 Surface acoustic wave (SAW)filters of assessed quality. Part 2. Guide to theuse
EPL/49
Comments for the above document are required by13 April, 2009
09/30199758 DCBS EN 61754-26 Fibre optic connector interfaces.Part 26. Type SF connector family
GEL/86/2
Comments for the above document are required by13 April, 2009
09/30199792 DCBS EN 61747-6-1 Liquid crystal display devices.Part 6-1. Measuring methods for liquid crystaldisplay modules. Transmissive type
EPL/47
Comments for the above document are required by13 April, 2009
09/30199811 DCBS EN 4632-006 Welded and brazed assembliesfor aerospace constructions. Weldability andbrazeability of materials. Part 006.Homogeneous assemblies titanium alloys
ACE/61/-/2
Comments for the above document are required by1 May, 2009
09/30199816 DCBS EN 2714-002 Aerospace series. Cables,electrical, single and multicore for generalpurpose. Operating temperatures between -55°C and 260°C. Part 002. Screened andjacketed. General
ACE/6/-/2
Comments for the above document are required by1 May, 2009
09/30198199 DCBS ISO 13257 Thermoplastics piping systems fornon pressure applications. Test method forresistance to elevated temperature cycling
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30198202 DCBS ISO 13259 Thermoplastics piping systems forunderground non-pressure applications. Testmethod for leaktightness of elastomeric sealingring type joints
PRI/88/1
Comments for the above document are required by12 June, 2009
09/30199120 DCBS EN ISO 17072-1 Leather. Chemicaldetermination of metal content. Part 1.Extractable metals
TCI/69
09/30199124 DCBS EN ISO 17072-2 Leather. Chemicaldetermination of metal content. Part 2. Totalmetal content
TCI/69
09/30199295 DCBS ISO 18901 Imaging materials. Processedsilver-gelatin type black-and white films.Specifications for stability
CPW/42
09/30199395 DCBS EN 62253 Photovoltaic pumping systems.Design qualification and performancemeasurements
GEL/82
09/30199512 DCBS EN 2591-307 Aerospace series. Elements ofelectrical and optical connection. Test methods.Part 307. Salt mist
ACE/6
Comments for the above document are required by30 April, 2009
09/30199515 DCBS EN 2591-402 Aerospace series. Elements ofelectrical and optical connection. Test methods.Part 402. Shock
ACE/6
Comments for the above document are required by30 April, 2009
09/30199518 DCBS EN 2591-403 Aerospace series. Elements ofelectrical and optical connection. Test methods.Part 403. Sinusoidal and random vibration
ACE/6
Comments for the above document are required by30 April, 2009
09/30199552 DCBS ISO/IEC 18014-3 Information technology.Security techniques. Time-stamping services.Part 3. Mechanisms producing linked tokens
IST/33
Comments for the above document are required by30 April, 2009
Update Standards Apr 2009 Prices may be subject to change. 51
09/30200548 DCBS EN 60317-22 AMD1 Specifications forparticular types of winding wires. Part 22.Polyester or polyesterimide enamelled roundcopper wire overcoated with polyamide, class 180
GEL/55
09/30200554 DCBS EN 60317-25 Specifications for particulartypes of winding wires. Part 25. Polyester orpolyesterimide overcoated with polyamide-imide enamelled round aluminum wire, class 200
GEL/55
09/30200559 DCBS EN 60745-2-19 AMD1 Hand-held motor-operated electric tools. Safety. Part 2-19.Particular requirements for jointers
CPL/61/6
09/30200572 DCBS EN 60317-26 AMD2 Specifications forparticular types of winding wires. Part 26.Polyamide-imide enamelled round copper wire,class 200
GEL/55
09/30200576 DCBS EN 60745-2-14 Hand-held motor-operatedelectric tools. Safety. Part 2-14. Particularrequirements for planers
CPL/61/6
09/30200585 DCBS EN 60317-29 AMD2 Specifications forparticular types of winding wires. Part 29.Polyester or polyesterimide overcoated withpolyamide-imide enamelled rectangular copperwire, class 200
GEL/55
09/30200589 DCBS EN 60317-42 AMD1 Specifications forparticular types of winding wires. Part 42.Polyester-amide-imide enamelled round copperwire, class 200
GEL/55
09/30200593 DCBS EN 60317-43 AMD1 Specifications forparticular types of winding wires. Part 43.Aromatic polyimide tape wrapped roundcopper wire, class 240
GEL/55
09/30200597 DCBS EN 60745-2-2 AMD Hand-held motor-operated electric tools. Safety. Part 2-2.Particular requirements for screwdrivers andimpact wrenches
CPL/61/6
09/30200601 DCBS EN 60317-44 AMD1 Specifications forparticular types of winding wires. Part 44.Aromatic polyimide tape wrapped rectangularcopper wire, class 240
GEL/55
09/30200606 DCBS EN 60745-2-11 AMD Hand-held motor-operated electric tools. Safety. Part 2-11.Particular requirements for reciprocating saws(jig and sabre saws)
CPL/61/6
09/30200401 DCBS EN 61240 Piezoelectric devices. Preparationof outline drawings of surface mounted devices(SMD) for frequency control and selection.General rules
EPL/49
Comments for the above document are required by17 April, 2009
09/30200407 DCBS EN 50526-1 Railway applications. Fixedinstallations. D. C. surge arresters and voltagelimiting devices. Part 1. Surge arresters
GEL/9/3
09/30200413 DCBS EN 60317-1 Specifications for particular typesof winding wires. Part 1. Polyvinyl acetalenamelled round copper wire, class 105
GEL/55
09/30200475 DCBS EN 60317-3 AMD1 Specifications forparticular types of winding wires. Part 3.Polyester enamelled round copper wire, class 155
GEL/55
09/30200483 DCBS EN ISO 5457 AMD1 Technical productdocumentation. Sizes and layout of drawingsheets
TDW/4
09/30200487 DCBS EN 60317-8 Specifications for particular typesof winding wires. Part 8. Polyesterimideenamelled round copper wire, class 180
GEL/55
09/30200498 DCBS EN 60317-12 Specifications for particulartypes of winding wire. Part 12. Polyvinyl acetalenamelled round copper wire, class 120
GEL/55
09/30200517 DCBS EN 60317-13 Specifications for particulartypes of winding wires. Part 13. Polyester orpolyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
GEL/55
09/30200527 DCBS EN 60317-15 AMD1 Specifications forparticular types of winding wires. Part 15.Polyesterimide enamelled round aluminiumwire, class 180
GEL/55
09/30200536 DCBS EN 60317-17 Specifications for particulartypes of winding wire. Part 17. Polyvinyl acetalenamelled rectangular copper wire, class 105
GEL/55
09/30200543 DCBS EN 60317-18 AMD1 Specifications forparticular types of winding wires. Part 18.Polyvinyl acetal enamelled rectangular copperwire, class 120
GEL/55
09/30200102 DCBS EN 50396 AMD1 Non electrical test methodsfor low voltage electric cables
GEL/20/17
09/30200106 DCBS EN 50363-0 AMD1 Insulating, sheathing andcovering materials for low voltage energycables. General introduction
GEL/20/17
09/30200109 DCBS EN 50363-2-1 AMD1 Insulating, sheathingand covering materials for low-voltage energycables. Part 2-1. Cross-linked elastomericsheathing compounds
GEL/20/17
09/30200113 DCBS EN 50363-3 AMD1 Insulating, sheathing andcovering materials for low voltage energycables. Part 3. PVC insulating compounds
GEL/20/17
09/30200117 DCBS EN 50363-5 AMD1. Insulating, sheathing andcovering materials for low voltage energycables. Part 5. Halogen-free, cross-linkedinsulating compounds
GEL/20/17
09/30200120 DCBS EN 50363-6 AMD1 Insulating, sheathing andcovering materials for low-voltage energycables. Part 6. Halogen-free, cross-linkedsheathing compounds
GEL/20/17
09/30200123 DCBS EN 50363-8 AMD1 Insulating, sheathing andcovering materials for low voltage energycables. Part 8. Halogen-free, thermoplasticsheathing compounds
GEL/20/17
09/30200143 DCBS EN 62080 Sound signalling devices forhousehold and similar purposes
PEL/23
09/30200251 DCBS EN 3375-002 Aerospace series. Cable,electrical, for digital data transmission. Part 002.General
ACE/6
Comments for the above document are required by15 May, 2009
09/30200385 DCBS EN 60130-9 Connectors for frequenciesbelow 3 MHz. Part 9. Circular connectors forradio and associated sound equipment
EPL/48
Comments for the above document are required by17 April, 2009
09/30200395 DCBS EN 61837-2 Surface mounted piezoelectricdevices for frequency control and selection.Standard outlines and terminal leadconnections. Part 2. Ceramic enclosures
EPL/49
Comments for the above document are required by17 April, 2009
Draft British Standards for Public Comment continued...
52 Update Standards Apr 2009Prices may be subject to change.
DOCUMENTS NOT ISSUEDAS DPCs
Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000
IEC 62591Industrial communication networks. WirelessHart communication network andcommunication profile
The above draft has been circulated withBSI Document: AMT/7_09_0033. Copies areavailable on request from the contact point(below).Contact: Committee Service CentreEmail: [email protected]
AMT/7
ISO 8596Ophthalmic optics. Visual acuity testing.Standard optotype and its presentation
This second edition cancels and replaces thefirst edition (ISO 8596:1994), which hasundergone minor revision to take into accountthe withdrawal without replacement ofISO 8597:1994. Copies of the document areavailable from the Programme Manager(below).Contact: Simon MerrimanEmail: [email protected]
CH/172/3
ISO 9801Ophthalmic instruments. Trial case lenses
This second edition cancels and replaces thefirst edition (ISO 9801:1997), which hasundergone a minor revision. Copies of theabove document are available from theProgramme Manager (below).Contact: Simon MerrimanEmail: [email protected]
CH/172/6
ISO 10341Ophthalmic instruments. Refractor heads
This second edition cancels and replaces thefirst edition (ISO 10341:1997), which hasundergone minor revision. Copies of the abovedocument are available from the ProgrammeManager (below).Contact: Simon MerrimanEmail: [email protected]
CH/172/6
09/30200820 DCBS ISO/IEC 14496-10 AMD1 Informationtechnology. Coding of audio-visual objects. Part 10. Advanced Video Coding
IST/37
Comments for the above document are required by30 June, 2009
09/30200871 DCBS EN 2591-227 Aerospace series. Elements ofelectrical and optical connection. Test methods.Part 227. Partial discharges test
ACE/6
Comments for the above document are required by27 May, 2009
09/30200888 DCBS EN 4644-003 Aerospace series. Connector,electrical and optical, rectangular, modular,rectangular inserts. Operating temperature125°C or 175°C continuous. Part 003.Rectangular inserts. Product standard
ACE/6
Comments for the above document are required by2 June, 2009
09/30200901 DCBS EN 4644-131 Aerospace series. Connector,electrical and optical, rectangular, modular,rectangular inserts, operating temperature175°C (or 125°C) continuous. Part 131. Size 3plug for rack and Panel applications. Productstandard
ACE/6
Comments for the above document are required by2 June, 2009
09/30200910 DCBS EN 4644-133 Aerospace series. Connector,electrical and optical, rectangular, modular,rectangular inserts, operating temperature175°C (or 125°C) continuous. Part 133. Size 3receptacle for rack and panel application.Product standard
ACE/6
Comments for the above document are required by2 June, 2009
09/30200929 DCBS EN 4644-141 Aerospace series. Connector,electrical and optical, rectangular, modular,rectangular inserts, operating temperature175°C (or 125°C) continuous. Part 141. Size 4plug for rack and panel applications. Productstandard
ACE/6
Comments for the above document are required by2 June, 2009
09/30200941 DCBS EN 4644-142 Aerospace series. Connector,electrical and optical, rectangular, modular,rectangular inserts, operating temperature175°C (or 125°C) continuous. Part 142. Size 4receptacle for rack and panel application.Product standard
ACE/6
Comments for the above document are required by2 June, 2009
09/30200957 DCBS ISO/IEC 14496-26 AMD1 Informationtechnology. Coding of audio-visual objects. Part 26. Audio conformance
IST/37
Comments for the above document are required by30 June, 2009
09/30200619 DCBS EN 61892-1 Mobile and fixed offshore units.Electrical installations. Part 1. Generalrequirements and conditions
JPEL/18
Comments for the above document are required by30 April, 2009
09/30200661 DCBS EN 60669-1 Switches for household andsimilar fixed-electrical installations. Part 1.General requirements
PEL/23
Comments for the above document are required by30 June, 2009
09/30200666 DCBS EN 62341-6-2 Organic light emitting diode(OLED) displays. Part 6-2. Measuring methods ofvisual quality
EPL/47
Comments for the above document are required by20 April, 2009
09/30200675 DCBS EN 60669-2-1 AMD Switches for householdand similar fixed electrical installations. Part 2-1.Particular requirements. Electronic switches
PEL/23
Comments for the above document are required by30 June, 2009
09/30200741 DCBS EN 60947-8 AMD2 Low-voltage switchgearand controlgear. Part 8. Control units for built-in thermal protection (PTC) for rotatingelectrical machines
PEL/17/2
Comments for the above document are required by30 June, 2009
09/30200763 DCBS ISO/IEC 14496-3 AMD1 Informationtechnology. Coding of audio-visual objects. Part 3. Audio
IST/37
Comments for the above document are required by30 June, 2009
09/30200776 DCBS ISO/IEC 14496-27 AMD1 Informationtechnology. Coding of audio-visual objects. Part 27. 3D Graphics conformance
IST/37
Comments for the above document are required by30 June, 2009
09/30200785 DCBS EN 60122-3 Quartz crystal units of assessedquality. Part 3. Standard outlines and leadconnections
EPL/49
Comments for the above document are required by30 April, 2009
09/30200793 DCBS EN 61994-2 Piezoelectric and dielectricdevices for frequency control and selection.Glossary. Part 2. Piezoelectric and dielectricfilters
EPL/49
Comments for the above document are required by30 April, 2009
Update Standards Apr 2009 Prices may be subject to change. 53
your order
EN 448:2009District heating pipes. Preinsulated bonded pipesystems for directly buried hot water networks.Fitting assemblies of steel service pipes,polyurethane thermal insulation and outercasing of polyethylene
RHE/9
EN 474:—Earth-moving machinery. Safety
EN 474-1:2006+A1:2009General requirements
B/513/1
EN 474-3:2006+A1:2009Requirements for loaders
B/513/1
EN 474-4:2006+A1:2009Requirements for backhoe loaders
B/513/1
EN 474-5:2006+A1:2009Requirements for hydraulic excavators
B/513/1
EN 474-6:2006+A1:2009Requirements for dumpers
B/513/1
EN 474-7:2006+A1:2009Requirements for scrapers
B/513/1
EN 474-8:2006+A1:2009Requirements for graders
B/513/1
EN 474-9:2006+A1:2009Requirements for pipelayers
B/513/1
EN 474-10:2006+A1:2009Requirements for trenchers
B/513/1
EN 614:—Safety of machinery. Ergonomic designprinciples
EN 614-1:2006+A1:2009Terminology and general principles
PH/9
EN 692:2005+A1:2009Machine tools. Mechanical presses. Safety
MTE/1
EN 693:2001+A1:2009Machine tools. Safety. Hydraulic presses
MTE/1
EN 791:1995+A1:2009Drill rigs. Safety
B/513/2
prEN ISO 26304Welding consumables. Solid wire electrodes,tubular cored electrodes and electrode-fluxcombinations for submerged arc welding ofhigh strength steels. Classification
This document, which will not be issued as aDraft for Public Comment, is identical toISO 26304:2008 and has been circulated toCEN members for voting. Please submit anycomments to the Programme Manager (below)by 30 April, 2009.Contact: Anne HannanEmail: [email protected]
WEE/39
prEN 50411:—Fibre organisers and closures to be used inoptical fibre communications systems. Productspecifications
prEN 50411-2-9:2008Non-sealed closures for air blown fibremicroduct cable, for category S & A
A copy of the above document is available fromthe contact point (below).Contact: Committee Service CentreEmail: [email protected]
GEL/86/2
CEN EUROPEANSTANDARDS
EUROPEAN RATIFIED TEXTS
The documents listed below have recentlybeen issued by CEN but have not yet beenpublished as BS ENs. BSI has an obligationto adopt all ENs and to withdraw anyconflicting British Standards (BSs) or partsof BSs. The following will beimplemented as BS ENs or as amendmentsto BS ENs shortly. Notification of theirimplementation will be given in theBS EN Publications section of the relevantedition of Update Standards.
EN 81:—Safety rules for the construction and installationof lifts. Special lifts for the transport of personsand goods
EN 81-40:2008Stairlifts and inclined lifting platforms intendedfor persons with impaired mobility
MHE/4
EN 316:2009Wood fibreboards. Definition, classification andsymbols
B/541
EN 415:—Packaging machines safety
EN 415-1:2000+A1:2009Terminology and classification of packagingmachines and associated equipment
MCE/3/3
ISO 10343Ophthalmic instruments. Ophthalmometers
This second edition cancels and replaces thefirst edition (ISO 10343:1997), which hasundergone minor revision. Copies of the abovedocument are available from the ProgrammeManager (below).Contact: Simon MerrimanEmail: [email protected]
CH/172/6
ISO 11981Ophthalmic optics. Contact lenses and contactlens care products. Determination of physicalcompatibility of contact lens care products withcontact lenses
This second edition cancels and replaces thefirst edition (ISO 11981:1999) which hasundergone minor revision. Copies of the abovedocument are available from the ProgrammeManager (below).Contact: Simon MerrimanEmail: [email protected]
CH/172/9
ISO 15254Ophthalmic optics and instruments. Electro-optical devices for enhancing low vision
This second edition cancels and replaces thefirst edition (ISO 15254:2002), which hasundergone minor revision. Copies of the abovedocument are available from the ProgrammeManager (below).Contact: Simon MerrimanEmail: [email protected]
CH/172/6
prEN ISO 6571Spices, condiments and herbs. Determination ofvolatile oil content (hydrodistillation method)
The above has been issued under UAPProcedure. Copies of the above available onrequest from contact point (below).Contact: Committee Service CentreEmail: [email protected]
AW/7
prEN ISO 14971Medical devices. Application of riskmanagement to medical devices
This revision of EN ISO 14971 has beencirculated under the Unique AcceptanceProcedure to CEN members by CEN/CENELEC JT3. It is intended to bring it in line with theamending Directive 2007/47/EC published in2007 by the European Commission whichamends the Active Implantable Medical DevicesDirective (90/385/EEC) and the General MedicalDevices Directive (93/42/EEC). This revision hasnot been circulated as a Draft for PublicComment (DPC) but copies of the text areavailable from the Programme Manager(below).Contact: Philippa YounasEmail: [email protected]
CH/210/4
Documents Not Issued as DPCs continued...
54 Update Standards Apr 2009Prices may be subject to change.
EN 3034:2009Aerospace series. Nuts, self-locking, hexagonalwith captive washer. In heat resisting steel FE-PA92HT (A286), silver coated. Classification:1100MPa/425°C
ACE/12
EN 3115:2009Aerospace series. Aluminium alloy 7050-T73.Wire for solid rivets. D ≤ 10 mm
ACE/61/-/24
EN 3155:—Aerospace series. Electrical contacts used inelements of connection
EN 3155-001:2009Technical specification
ACE/6
EN 3155-009:2009Contacts, electrical, female, type A, crimp, class S. Product standard
ACE/6
EN 3155-067:2009Contacts, electrical, coaxial, size 08, male, type D, solder, class R. Product standard
ACE/6
EN 3155-068:2009Contacts, electrical, coaxial, size 08, female,type D, solder, class R. Product standard
ACE/6
EN 3155-069:2009Contacts, electrical, coaxial, size 16, female,type D, solder, class P. Product standard
ACE/6
EN 3323:2009Aerospace series. Bolts with double hexagonhead, relieved shank long thread. In heatresisting steel FE-PM 38 (FV 535). Classification:1000MPa/550°C
ACE/12
EN 3373:—Aerospace series. Terminal lugs and in-linesplices for crimping on electric conductors
EN 3373-010:2009Terminal lugs, ring shaped, tin plated, forcrimping on copper conductors, temperature upto 150°C for metric and inch stud series. Productstandard
ACE/6
EN 3373-011:2009Terminal lugs, ring shaped, nickel plated, forcrimping on copper conductors, temperature upto 260°C for metric and inch stud series. Productstandard
ACE/6
EN 1997:—Eurocode 7. Geotechnical design
EN 1997-1:—General rules
CORRIGENDUM 1:February 2009
to EN 1997-1:2004B/526
EN 2115:2009Aerospace series. Aluminium alloy 2117-T42.Wire for solid rivets. D ≤ 10 mm
ACE/61/-/24
EN 2116:2009Aerospace series. Aluminium alloy 2017A-T42.Wire for solid rivets. D ≤ 10mm
ACE/61/-/24
EN 2117:2009Aerospace series. Aluminium alloy AL-P5056A(5056A)-H32. Wire for solid rivets. D ≤ 10mm
ACE/61/-/24
EN 2439:2009Aerospace series. Steel FE-PL2102 (34NiCr6). 900 MPa ≤ Rm ≤ 1100 MPa. Forgings. DE ≤40 mm
ACE/61
EN 2460:2009Aerospace series. Steel FE-PM1901 (X12CrNi13).600 MPa ≤ Rm ≤ 800 MPa. Bars. De ≤ 70 mm
ACE/61
EN 2461:2009Aerospace series. Steel FE-PM1901 (X12CrNi3).600 MPa ≤ Rm ≤ 800 MPa. Forgings. De ≤ 70 mm
ACE/61
EN 2466:2009Aerospace series. Steel FE-PA3901 (X2CrNi19-11).Softened. Forgings. De ≤ 100 mm
ACE/61
EN 2854:—Aerospace series. Cables, electrical for generalpurpose. Cross sections equal to and greaterthan 9mm2. Operating temperatures between -55°C and 260°C
EN 2854-003:2009Product standard
ACE/6
EN 2997:—Aerospace series. Connectors, electrical, circular,coupled by threaded ring, fire-resistant or nonfire-resistant, operating temperatures -65°C to175°C continuous, 200°C continuous, 260°Cpeak
EN 2997-012:2009Jam-nut for jam-nut receptacles. Productstandard
ACE/6
EN 2997-013:2009O-ring seal for jam-nut receptacles. Productstandard
ACE/6
EN 894:—Safety of machinery. Ergonomics requirementsfor the design of displays and control actuators
EN 894-2:1997+A1:2008Displays
PH/9
EN 957:—Stationary training equipment
EN 957-5:2009Stationary exercise bicycles and upper bodycrank training equipment, additional specificsafety requirements and test methods
SW/136/4
EN 1366:—Fire resistance tests for service installations
EN 1366-3:2009Penetration seals
FSH/22/3
EN 1465:2009Adhesives. Determination of tensile lap-shearstrength of bonded assemblies
PRI/52
EN 1474:—Installation and equipment for liquefied naturalgas. Design and testing of marine transfersystems
EN 1474-2:2008Design and testing of transfer hoses
GSE/38
EN 1672:—Food processing machinery. Basic concepts
EN 1672-2:2005+A1:2009Hygiene requirements
MCE/3/5
EN 1777:2004+A1:2009Hydraulic platforms (HPs) for fire fighting andrescue services. Safety requirements and testing
FSH/17
EN 1870:—Safety of woodworking machines. Circularsawing machines
EN 1870-3:2001+A1:2009Down cutting cross-cut saws and dual purposedown cutting cross-cutsaws/circular saw benches
MTE/23
EN 1966:—Structural adhesives. Characterization of asurface by measuring adhesion by means of thethree point bending method
CORRIGENDUM 1:February 2009
to EN 1966:2009PRI/52
Update Standards Apr 2009 Prices may be subject to change. 55
EN 4642:2009Aerospace series. Steel FE-PM 3504(X4CrNiMo16-5-1). Air melted. Hardened andtempered. Sheet and plate. 0,6 mm ≤ a ≤50 mm. 900 MPa ≤ Rm ≤ 1050 MPa
ACE/61/-/15
EN 4649:2009Aerospace series. Handheld fire extinguisherswith synthesis gases, for aircraft use. Technicalspecification and qualification conditions
ACE/6
EN 9104:—Aerospace series. Quality management systems
EN 9104-003:2009Requirements for Aerospace QualityManagement System (AQMS) Auditor Trainingand Qualification
ACE/1
EN 10269:—Steels and nickel alloys for fasteners withspecified elevated and/or low temperatureproperties
CORRIGENDUM 1:October 2008
to EN 10269:1999ISE/73/2
EN 12390:—Testing hardened concrete
EN 12390-3:2009Compressive strength of test specimens
B/517/1
EN 12390-5:2009Flexural strength of test specimens
B/517/1
EN 12390-7:2009Density of hardened concrete
B/517/1
EN 12390-8:2009Depth of penetration of water under pressure
B/517/1
EN 12417:2001+A2:2009Machine tools. Safety. Machining centres
MTE/1/1
EN 12504:—Testing concrete in structures
EN 12504-1:2009Cored specimens. Taking, examining and testingin compression
B/517/1
EN 12717:2001+A1:2009Safety of machine tools. Drilling machines
MTE/1/1
EN 12720:2009Furniture. Assessment of surface resistance tocold liquids
FW/0/1
EN 4499:2009Aerospace series. Screws, 100° countersunkreduced head, offset cruciform recess, closetolerance normal shank, short thread, intitanium alloy, anodized, with aluminiumpigmented coating. Classification: 1100 MPa (at ambient temperature)/315°C
ACE/12
EN 4528:2009Aerospace series. Steel FE-PA3903 (X10CrNi18-8).Cold rolled. Strip for springs. A ≤ 3 mm. 1250 MPa ≤ Rm ≤ 1640 MPa
ACE/61/-/5
EN 4532:2009Aerospace series. Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket.Technical specification
ACE/6
EN 4604:—Aerospace series. Cable, electrical, for signaltransmission
EN 4604-003:2009Cable, coaxial, 50 ohm, 200°C, type WZ. Productstandard
ACE/6
EN 4604-006:2009Cable, coaxial, 50 ohm, 200°C, type WM.Product standard
ACE/6
EN 4626:—Aerospace series. Connectors, optical,rectangular, multicontact, rack and panel,Quadrax cavity, 2,5 mm diameter ferrule.Operating temperatures. 65°C to 125°C (cabledependent). Flush contacts
EN 4626-201:2009Optical contact (subassembly) for receptacle.Product standard
ACE/6
EN 4640:—Aerospace series. Connectors, optical,rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removablealignment sleeve holder
EN 4640-001:2009Technical specification
ACE/6
EN 4640-002:2009List of product standards
ACE/6
EN 4641:—Aerospace series. Cables, optical 125 µm outsidediameter cladding
EN 4641-102:2009Semi-loose 62, 5-125 µm GI fiber nominal 1,8 mm outside diameter. Product standard
ACE/6
EN 3375:—Aerospace series. Cable, electrical, for digitaldata transmission
EN 3375-009:2009Single braid. CAN Bus. 120 Ohms. Type WX.Product standard
ACE/6
EN 3389:2009Aerospace series. Fasteners, externally threaded,in heat resisting nickel base alloy NI-PH1302(Waspaloy). Classification: 1210 MPa/730°C.Manufacturing method optional. Technicalspecification
ACE/12
EN 3475:—Aerospace series. Cables, electrical, aircraft use.Test methods
EN 3475-802:2009Capacitance unbalance
ACE/6
EN 3475-810:2009Structural return loss
ACE/6
EN 3660:—Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors
EN 3660-019:2009Cable outlet, style A, 45°, unsealed, with cabletie strain relief. Product standard
ACE/6
EN 3660-025:2009Cable outlet, style A, straight, unsealed, withcable tie strain relief for EN 3646. Productstandard
ACE/6
EN 3660-026:2009Cable outlet, style A, 90°, unsealed, with cabletie strain relief for EN 3646. Product standard
ACE/6
EN 3660-027:2009Cable outlet, style A, 45°, unsealed, with cabletie strain relief for EN 3646. Product standard
ACE/6
EN 3745:—Aerospace series. Fibres and cables, optical,aircraft use. Test methods
EN 3745-514:2009Cable twist bend
ACE/6
EN 4372:2009Aerospace series. Heat resisting nickel alloy withcopper NIPD9001 (NiCu31). Wire for solid rivets.D ≤ 10 mm
ACE/61/-/5
CEN European Standards continued...
56 Update Standards Apr 2009Prices may be subject to change.
EN 15220:—Railway applications. Brake indicators
EN 15220-1:2008Pneumatically operated brake indicators
RAE/4
EN 15333:—Respiratory equipment. Open-circuit umbilicalsupplied compressed gas diving apparatus
EN 15333-2:2009Free flow apparatus
PH/4/7
EN 15461:2009Railway applications. Noise emission.Characterisation of the dynamic properties oftrack sections for pass by noise measurements
EH/1/2
EN 15543:—Glass packaging. Finishes for bottles. Screwthread finishes for bottles for non-carbonatedliquids
CORRIGENDUM 1:December 2008
to EN 15543:2008PKW/0/-/7
EN 15595:2009Railway applications. Braking. Wheel slideprotection
RAE/4
EN 15624:2008Railway applications. Braking. Empty-loadedchangeover devices
RAE/4
EN 15625:2008Railway applications. Braking. Automaticvariable load sensing devices
RAE/4
EN 15690:—Copper and copper alloys. Determination ofiron content
EN 15690-2:2009Flame atomic absorption spectrometric method(FAAS)
NFE/34
EN 15741:2009Animal feeding stuffs. Determination of OC-pesticides and PCBs by GC/MS
AW/10
EN 15742:2009Animal feeding stuffs. Determination of OC-pesticides and PCBs by GC/ECD
AW/10
EN 15882:—Extended application of results from fireresistance tests for service installation
EN 15882-3:2009Penetration seals
FSH/22
EN 13414-2:2003+A2:2008Specification for information for use andmaintenance to be provided by themanufacturer
MHE/2
EN 13445:—Unfired pressure vessels
EN 13445-4:—Fabrication
AMENDMENT 5:February 2009
to EN 13445-4:2002PVE/1
EN 13736:2003+A1:2009Safety of machine tools. Pneumatic presses
MTE/1
EN 13834:2007+A1:2009Cookware. Ovenware for use in traditionaldomestic ovens
CW/9
EN 13898:2003+A1:2009Machine tools. Safety. Sawing machines for coldmetal
MTE/1/-/10
EN 13985:2003+A1:2009Machine tools. Safety. Guillotine shears
MTE/1
EN 14043:2005+A1:2009High rise aerial appliances for fire service use.Turntable ladders with combined movements.Safety and performance requirements and testmethods
FSH/17
EN 14044:2005+A1:2009High rise aerial appliances for fire service use.Turntable ladders with sequential movements.Safety and performance requirements and testmethods
FSH/17
EN 14070:2003+A1:2009Safety of machine tools. Transfer and special-purpose machines
MTE/1/1
EN 14758:—Plastics piping systems for non-pressureunderground drainage and sewerage.Polypropylene with mineral modifiers (PP-MD)
EN 14758-1:2005+A1:2009Specifications for pipes, fittings and the system
PRI/88/1
EN 14930:2007+A1:2009Agricultural and forestry machinery andgardening equipment. Pedestrian controlledand hand-held machines. Determination ofaccessibility of hot surfaces
AGE/6
EN 12721:2009Furniture. Assessment of surface resistance towet heat
FW/0/1
EN 12722:2009Furniture. Assessment of surface resistance todry heat
FW/0/1
EN 12733:2001+A1:2009Agricultural and forestry machinery. Pedestriancontrolled motor mowers. Safety
AGE/20
EN 12957:2001+A1:2009Machine tools. Safety. Electro dischargemachines
MTE/1
EN 13001:—Cranes. General design
EN 13001-2:2004+A2:2009Load actions
MHE/3/1
EN 13103:2009Railway applications. Wheelsets and bogies.Non-powered axles. Design guide
RAE/3/-/1
EN 13104:2009Railway applications. Wheelsets and bogies.Powered axles. Design method
RAE/3/-/1
EN 13108:—Bituminous mixtures. Material specifications
EN 13108-20:—Type Testing
CORRIGENDUM 1:October 2008
to EN 13108-20:2006B/510/1
EN 13108-21:—Factory Production Control
CORRIGENDUM 1:October 2008
to EN 13108-21:2006B/510/1
EN 13158:2008Protective clothing. Protective jackets, body andshoulder protectors for equestrian use: Forhorse riders and those working with horses, andfor horsedrivers. Requirements and testmethods
PH/3/9
EN 13260:2009Railway applications. Wheelsets and bogies.Wheelsets. Products requirements
RAE/3/-/1
EN 13414:—Steel wire rope slings. Safety
EN 13414-1:2003+A2:2008Slings for general lifting service
MHE/2
Update Standards Apr 2009 Prices may be subject to change. 57
EN 50508:2009Multi-purpose insulating sticks for electricaloperations on high voltage installations
PEL/78
EN 50512:2009Electrical installations for lighting andbeaconing of aerodromes. Advanced VisualDocking Guidance Systems (A-VDGS)
EPL/97
EN 50513:2009Solar wafers. Data sheet and productinformation for crystalline silicon wafers forsolar cell manufacturing
GEL/82
EN 60127:—Miniature fuses
EN 60127-4:—(IEC 60127-4:2005/A1:2008)Universal modular fuse-links (UMF). Through-hole and surface mount types
AMENDMENT 1:February 2009
to EN 60127-4:2005PEL/32
EN 60204:—Safety of machinery. Electrical equipment ofmachines
EN 60204-1:—(IEC 60204-1:2005/A1:2008)General requirements
AMENDMENT 1:February 2009
to EN 60204-1:2006MCE/3
EN 60205:—(IEC 60205:2006/A1:2009)Calculation of the effective parameters ofmagnetic piece parts
AMENDMENT 1:February 2009
to EN 60205:2006EPL/51
EN 60335:—Household and similar electrical appliances.Safety
EN 60335-2-5:—Particular requirements for dishwashers
AMENDMENT 11:February 2009
to EN 60335-2-5:2003CPL/61/14
EN 60669:—Switches for household and similar fixedelectrical installations
EN 60669-2-1:—(IEC 60669-2-1:2002/A1:2008)Particular requirements. Electronic switches
AMENDMENT 1:February 2009
to EN 60669-2-1:2004PEL/23
CENELEC PUBLICATIONS
EUROPEAN RATIFIED TEXTS
The documents listed below have recentlybeen issued by CENELEC but have not yetbeen published as BS ENs. BSI has anobligation to adopt all ENs and towithdraw any conflicting BritishStandards (BSs) or parts of BSs. Thefollowing will be implemented as BS ENsor as amendments to BS ENs shortly.Notification of their implementation willbe given in the BS EN Publications sectionof the relevant edition of UpdateStandards.
EN 50131:—Alarm systems. Intrusion and hold-up systems
EN 50131-1:—System requirements
INTERPRETATION SHEET 1:February 2009
to EN 50131-1:2006GW/1/2
EN 50216:—Power transformer and reactor fittings
EN 50216-9:2009Oil to water heat exchangers
PEL/14
EN 50216-10:2009Oil-to-air heat exchangers
PEL/14
EN 50341:—Overhead electrical lines exceeding AC 45 kV
EN 50341-3:—Set of National Normative Aspects
CORRIGENDUM 3:February 2009
to EN 50341-3:2001PEL/11
EN 50412:—Power line communication apparatus andsystems used in low-voltage installations in thefrequency range 1,6 MHz to 30 MHz
EN 50412-2-1:—Residential, commercial and industrialenvironment. Immunity requirements
CORRIGENDUM 1:February 2009
to EN 50412-2-1:2005PEL/205
EN 50423:—Overhead electrical lines exceeding AC 1 kV upto and including AC 45 kV
EN 50423-3:—Set of National Normative Aspects
CORRIGENDUM 2:February 2009
to EN 50423-3:2005PEL/11
CEN WORKSHOPAGREEMENTS
CWA 15517:2009European handbook for defence procurement
supersedes CWA 15517:2006£34.00 members, £68.00 non-members
CWA 15778:2008Document processing for accessibility
no current standard is superseded£90.00 members, £180.00 non-members
CWA 15929:2009Best practices for the design and developmentof critical information systems
no current standard is superseded£90.00 members, £180.00 non-members
CWA 15931:—Disaster and emergency management. Sharedsituation awareness
CWA 15931-1:2009Message structure
no current standard is superseded£84.00 members, £168.00 non-members
CWA 15931-2:2009Codes for the message structure
no current standard is superseded£84.00 members, £168.00 non-members
CWA 15940:2009Automotive fuels. Paraffinic diesel fromsynthesis or hydrotreatment. Requirements andtest methods
no current standard is superseded£34.00 members, £68.00 non-members
CEN TECHNICALSPECIFICATIONS
CEN/TS 15436:—Road service area maintenance equipment
CEN/TS 15436-3:2009Classification
B/513
CEN/TS 15722:2009Road transport and traffic telematics. ESafety.ECall minimum set of data (MSD)
EPL/278
CEN/TS 15747:2008Solid recovered fuels. 14C-based methods forthe determination of the biomass content
PTI/17
CEN Workshop Agreements
58 Update Standards Apr 2009Prices may be subject to change.
EN 61755-3-8:2009(IEC 61755-3-8:2009)Optical interface, 2,5 mm and 1,25mm diametercylindrical 8 degrees angled-APC compositeferrule using titanium as fibre surroundingmaterial, single mode fibre
GEL/86/2
EN 61952:2008(IEC 61952:2008)Insulators for overhead lines. Composite linepost insulators for A.C. systems with a nominalvoltage greater than 1000 V. Definitions, testmethods and acceptance criteria
PEL/36
EN 61968:—Application integration at electric utilities.System interfaces for distribution management
EN 61968-13:2008(IEC 61968-13:2008)CIM RDF Model exchange format fordistribution
PEL/57
EN 62007:—Semiconductor optoelectronic devices for fibreoptic system applications
EN 62007-1:2008(IEC 62007-1:2008)Specification template for essential ratings andcharacteristics
GEL/86/3
EN 62040:—Uninterruptible power systems (UPS)
EN 62040-1:—(IEC 62040-1:2008+CORR:2008)General and safety requirements for UPS
CORRIGENDUM 1:February 2009
to EN 62040-1:2008PEL/22
EN 62137:—Surface mounting technology. Environmentaland endurance test methods for surface mountsolder joint
EN 62137-1-3:2009(IEC 62137-1-3:2008)Cyclic drop test
EPL/501
EN 62137-1-4:2009(IEC 62137-1-4:2009)Cyclic bending test
EPL/501
EN 62305:—Protection against lightning
EN 62305-3:2006+A11:2009Physical damage to structures and life hazard
GEL/81
EN 61109:2008(IEC 61109:2008)Insulators for overhead lines. Compositesuspension and tension insulators for A.C.systems with a nominal voltage greater than1000 V. Definitions, test methods andacceptance criteria
PEL/36
EN 61169:—Radio-frequency connectors
EN 61169-38:2009(IEC 61169-38:2008)Sectional specification. Radio frequency coaxialconnectors model, slide-in (rack and panelapplications). Characteristic impedance 50 OHMS (type TMA). 50 ohm applications
EPL/46/2
EN 61300:—Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures
EN 61300-2-2:2009(IEC 61300-2-2:2009)Tests. Mating durability
GEL/86/2
EN 61300-3:—Examination and measurements
EN 61300-3-2:2009(IEC 61300-3-2:2009)Polarization dependent loss in a single-modefibre optic device
GEL/86/2
EN 61300-3-34:2009(IEC 61300-3-34:2009)Attenuation of random mated connectors
GEL/86/2
EN 61754:—Fibre optic connector interfaces
EN 61754-25:2009(IEC 61754-25:2008)Type RAO connector family
GEL/86/2
EN 61755:—Fibre optic connector optical interfaces
EN 61755-3-1:2009(IEC 61755-3-1:2006)Optical interface, 2,5 mm and 1,25 mmdiameter cylindrical full zirconia PC ferrule,single mode fibre
GEL/86/2
EN 61755-3-2:2009(IEC 61755-3-2:2006)Optical interface, 2,5 mm and 1,25 mmdiameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres
GEL/86/2
EN 60958:—Digital audio interface
EN 60958-1:2008(IEC 60958-1:2008)General
EPL/100
EN 61000:—Electromagnetic compatibility (EMC)
EN 61000-4:—Testing and measurement techniques
EN 61000-4-3:—Radiated, radio-frequency, electromagnetic fieldimmunity test
INTERPRETATION SHEET 1:February 2009
to EN 61000-4-3:2006GEL/210/12
EN 61000-4-6:—Immunity to conducted disturbances, inducedby radio-frequency fields
INTERPRETATION SHEET 1:February 2009
to EN 61000-4-6:2007GEL/210/12
EN 61000-4-17:—(IEC 61000-4-17:1999/A2:2008)Ripple on D.C. input power port immunity test
AMENDMENT 2:February 2009
to EN 61000-4-17:1999GEL/210/12
EN 61008:—Residual current operated circuit-breakerswithout integral overcurrent protection forhousehold and similar uses (RCCB’s)
EN 61008-1:—General rules
AMENDMENT 12:February 2009
to EN 61008-1:2004PEL/23/1
EN 61009:—Residual current operated circuit-breakers withintegral overcurrent protection for householdand similar uses (RCBO’s)
EN 61009-1:—General rules
AMENDMENT 12:February 2009
to EN 61009-1:2004PEL/23/1
EN 61009-1:—General rules
AMENDMENT 13:February 2009
to EN 61009-1:2004PEL/23/1
Update Standards Apr 2009 Prices may be subject to change. 59
IEC 60601:—Medical electrical equipment
IEC 60601-1:—General requirements for basic safety andessential performance
INTERPRETATION SHEET 2:January 2009
to IEC 60601-1:2005CH/62/1
IEC 60601-2-2:2009(Edition 5)
Particular requirements for the basic safety andessential performance of high frequencysurgical equipment and high frequency surgicalaccessories£213.12 members, £222.00 non-members
CH/62/4
IEC 60601-2-19:2009(Edition 2)
Particular requirements for the basic safety andessential performance of infant incubators£134.40 members, £140.00 non-members
CH/62/4
IEC 60601-2-20:2009(Edition 2)
Particular requirements for the basic safety andessential performance of infant transportincubators£151.68 members, £158.00 non-members
CH/62/4
IEC 60601-2-21:2009(Edition 2)
Particular requirements for the basic safety andessential performance of infant radiantwarmers£134.40 members, £140.00 non-members
CH/62/4
IEC 60601-2-44:2009(Edition 3)
Particular requirements for basic safety andessential performance of X-ray equipment forcomputed tomography£151.68 members, £158.00 non-members
CH/62/2
IEC 60793:—Optical fibres
IEC 60793-1-47:2009(Edition 3)
Measurement methods and test procedures.Macrobending loss£65.28 members, £68.00 non-members
GEL/86/1
IEC 60809:—Lamps for road vehicles. Dimensional, electricaland luminous requirements
AMENDMENT 4:February 2009
to IEC 60809:2002£91.20 members, £95.00 non-members
CPL/34/1
IEC PUBLICATIONS
It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.
The following IEC publications areavailable from BSI Customer Services (see’How to order’ on page 2)
IEC/TR 60083:2009(Edition 6)
Plugs and socket-outlets for domestic andsimilar general use standardized in membercountries of IEC£242.88 members, £253.00 non-members
PEL/23
IEC 60086:—Primary batteries
IEC 60086-5:2005(Edition 2)
Safety of batteries with aqueous electrolyte£121.92 members, £127.00 non-members
CPL/35
IEC 60099:—Surge arresters
IEC 60099-4:—Metal-oxide surge arresters without gaps forA.C. systems
AMENDMENT 2:February 2009
to IEC 60099-4:2006£52.80 members, £55.00 non-members
PEL/37
IEC 60286:—Packaging of components for automatichandling
IEC 60286-5:—Matrix trays
AMENDMENT 1:February 2009
to IEC 60286-5:2003£52.80 members, £55.00 non-members
EPL/40X
IEC 60424:—Ferrite cores. Guide on the limits of surfaceirregularities
IEC 60424-5:2009Planar-cores£48.00 members, £50.00 non-members
EPL/51
IEC 60598:—Luminaires
IEC 60598-2-14:2009Particular requirements. Luminaires for coldcathode tubular discharge lamps (neon tubes)and similar equipment£100.80 members, £105.00 non-members
CPL/34/4
EN 62320:—Maritime navigation and radiocommunicationequipment and systems. AutomaticIdentification System (AIS)
EN 62320-1:—(IEC 62320-1:2007/A1:2008)AIS Base Stations. Minimum operational andperformance requirements, methods of testingand required test results
AMENDMENT 1:February 2009
to EN 62320-1:2007EPL/80
EN 62419:2009(IEC 62419:2008)Control technology. Rules for the designation ofmeasuring instruments
GEL/65
EN 62503:2008(IEC 62503:2008)Multimedia quality. Method of assessment ofsynchronization of audio and video
EPL/100
EN 80416:—Basic principles for graphical symbols for use onequipment
EN 80416-1:2009(IEC 80419-1:2008)Creation of graphical symbols for registration
GEL/3
EN 80601:—Medical electrical equipment
EN 80601-2-58:2009(IEC 80601-2-58:2008)Particular requirements for the basic safety andessential performance of lens removal devicesand vitrectomy devices for ophthalmic surgery
CH/62/4
CENELEC TECHNICALSPECIFICATIONS
CLC/TS 50398:2009Alarm systems. Combined and integratedsystems. General requirements
GW/1
CENELEC Publications continued...
60 Update Standards Apr 2009Prices may be subject to change.
Please
do not send
confirmation
of
orders placed by
telephone
as it can lead to
duplication
IEC 61249-2-32:2009Reinforced base materials, clad and unclad.Halogenated modified or unmodified resinsystem, woven E-glass laminate sheets ofdefined relative permittivity (equal to or lessthan 3,7 at 1 GHz) and flammability (verticalburning test), copper-clad£91.20 members, £95.00 non-members
EPL/501
IEC 61249-2-33:2009Reinforced base materials, clad and unclad.Non-halogenated modified or unmodified resinsystem, woven E-glass laminate sheets ofdefined relative permittivity (equal to or lessthan 4,1 at 1 GHz) and flammability (verticalburning test), copper-clad£91.20 members, £95.00 non-members
EPL/501
IEC 61249-2-34:2009Reinforced base materials, clad and unclad.Non-halogenated modified or unmodified resinsystem, woven E-glass laminate sheets ofdefined relative permittivity (equal to or lessthan 3,7 at 1 GHz) and flammability (verticalburning test), copper-clad£91.20 members, £95.00 non-members
EPL/501
IEC 61280:—Fibre optic communication subsystem testprocedures
IEC 61280-2-9:2009(Edition 2)
Digital systems. Optical signal-to-noise ratiomeasurement for dense wavelength-divisionmultiplexed systems£91.20 members, £95.00 non-members
GEL/86/3
IEC 61300:—Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures
IEC 61300-2-48:2009(Edition 2)
Tests. Temperature-humidity cycling£45.12 members, £47.00 non-members
GEL/86/2
IEC 61400:—Wind turbines
IEC 61400-3:2009Design requirements for offshore wind turbines£230.40 members, £240.00 non-members
PEL/88/-/3
IEC 61477:2009(Edition 2)
Live working. Minimum requirements for theutilization of tools, devices and equipment£57.60 members, £60.00 non-members
PEL/78
IEC 61095:2009(Edition 2)
Electromechanical contactors for household andsimilar purposes
PEL/17/2
IEC 61156:—Multicore and symmetrical pair/quad cables fordigital communications
IEC 61156-5:2009(Edition 2)
Symmetrical pair/quad cables with transmissioncharacteristics up to 1000 MHz. Horizontal floorwiring. Sectional specification£100.80 members, £105.00 non-members
EPL/46
IEC 61169:—Radio-frequency connectors
IEC 61169-24:2009(Edition 2)
Sectional specification. Radio frequency coaxialconnectors with screw coupling, typically foruse in 75 ohm cable networks (type F)£91.20 members, £95.00 non-members
EPL/46/2
IEC 61184:—Bayonet lampholders
CORRIGENDUM 1:February 2009
to IEC 61184:2008CPL/34/2
IEC 61196:—Coaxial communication cables
IEC 61196-1-201:2009Environmental test methods. Test for cold bendperformance of cable£35.52 members, £37.00 non-members
EPL/46/1
IEC 61196-1-208:2009Environmental test methods. Longitudinalpneumatic resistance£30.72 members, £32.00 non-members
EPL/46
IEC 61196-1-313:2009Mechanical test methods. Adhesion of dielectricand sheath£35.52 members, £37.00 non-members
EPL/46
IEC 61249:—Materials for printed boards and otherinterconnecting structures
IEC 61249-2-31:2009Reinforced base materials, clad and unclad.Halogenated modified or unmodified resinsystem, woven E-glass laminate sheets ofdefined relative permittivity (equal to or lessthan 4,1 at 1 GHz) and flammability (verticalburning test), copper-clad£91.20 members, £95.00 non-members
EPL/501
IEC 60964:2009(Edition 2)
Nuclear power plants. Control rooms. Design£134.40 members, £140.00 non-members
NCE/8
IEC 60974:—Arc welding equipment
IEC 60974-8:2009(Edition 2)
Gas consoles for welding and plasma cuttingsystems£73.92 members, £77.00 non-members
WEE/6
IEC 61000:—Electromagnetic compatibility (EMC)
IEC 61000-3-2:—Limits. Limits for harmonic current emissions(equipment input current ≤ 16 A per phase)
AMENDMENT 2:February 2009
to IEC 61000-3-2:2005GEL/210/12
IEC 61000-4:—Testing and measurement techniques
IEC 61000-4-27:—Unbalance, immunity test for equipment withinput current not exceeding 16 A per phase
AMENDMENT 1:February 2009
to IEC 61000-4-27:2000GEL/210/12
IEC 61000-4-28:—Variation of power frequency, immunity test forequipment with input current not exceeding 16 A per cent phase
AMENDMENT 2:February 2009
to IEC 61000-4-28:2002GEL/210/12
IEC 61058:—Switches for appliances
IEC 61058-1:—General requirements
CORRIGENDUM 1:February 2009
to IEC 61058-1:2008EPL/23
IEC 61094:—Electroacoustics. Measurement microphones
IEC 61094-2:2009(Edition 2)
Primary method for pressure calibration oflaboratory standard microphones by thereciprocity technique£151.68 members, £158.00 non-members
EPL/29
IEC Publications continued...
62 Update Standards Apr 2009Prices may be subject to change.
IEC 62430:2009Environmentally conscious design for electricaland electronic products£108.48 members, £113.00 non-members
GEL/111
IEC 62448:2009(Edition 2)
Multimedia systems and equipment Multimediae-publishing and e-books. Generic format for e-publishing£238.08 members, £248.00 non-members
EPL/100
IEC 62516:—Terrestrial digital multimedia broadcasting (T-DMB) receivers
IEC 62516-1:2009(Edition 2)
Basic requirement£100.80 members, £105.00 non-members
EPL/100
IEC 62524:2009Multimedia systems and equipment. Multimediae-publishing and e-books. Readers format for e-publishing£151.68 members, £158.00 non-members
EPL/100
IEC CISPR 14:—Electromagnetic compatibility. Requirements forhousehold appliances, electric tools and similarapparatus
IEC CISPR 14-1:—Emission
CORRIGENDUM 1:January 2009
to IEC CISPR 14-1:2005GEL/210/11
IEC CISPR 25:—Vehicles, boats and internal combustionengines. Radio disturbance characteristics.Limits and methods of measurement for theprotection of on-board receivers
CORRIGENDUM 1:January 2009
to IEC CISPR 25:2008GEL/210/11
IEC CISPR TR 16:—Specification for radio disturbance andimmunity measuring apparatus and methods
IEC CISPR TR 16-4-1:2009(Edition 2)
Uncertainties, statistics and limit modelling.Uncertainties in standardized EMC tests£225.60 members, £235.00 non-members
GEL/210/12
IEC 61753:—Fibre optic interconnecting devices and passivecomponents performance standard
IEC 61753-031-3:2009Non-connectorized single-mode 1xN and 2xNnon-wavelength-selective branching devices(NWBD) for Category U. Uncontrolledenvironment£73.92 members, £77.00 non-members
GEL/86/2
IEC 61784:—Industrial communication networks. Profiles
IEC 61784-5-3:—Installation of fieldbuses. Installation profilesfor CPF 3
CORRIGENDUM 1:February 2009
to IEC 61784-5-3:2007AMT/7
IEC 61918:—Industrial communication networks. Installationof communication networks in industrialpremises
CORRIGENDUM 1:February 2009
to IEC 61918:2007AMT/7
IEC 61995:—Devices for the connection of luminaires forhousehold and similar purposes
IEC 61995-2:2009Standard sheets for DCL£48.00 members, £50.00 non-members
PEL/23
IEC 62097:2009Hydraulic machines, radial and axial.Performance conversion method from model toprototype£213.12 members, £222.00 non-members
MCE/15
IEC 62137:—Surface mounting technology. Environmentaland endurance test methods for surface mountsolder joints
IEC 62137-1-5:2009Mechanical shear fatigue test£91.20 members, £95.00 non-members
EPL/501
IEC 62192:2009Live working. Insulating ropes£91.20 members, £95.00 non-members
PEL/78
IEC/TR 62291:2009(Edition 2)
Multimedia data storage. Application programinterface for UDF based file systems£73.92 members, £77.00 non-members
EPL/100
IEC 61535:2009Installation couplers intended for permanentconnection in fixed installations£151.68 members, £158.00 non-members
PEL/23
IEC 61558:—Safety of power transformers, power supplies,reactors and similar products
IEC 61558-1:—General requirements and tests
AMENDMENT 1:February 2009
to IEC 61558-1:2005PEL/96
IEC 61558-2-4:2009(Edition 2)
Particular requirements and tests for isolatingtransformers and power supply unitsincorporating isolating transformers£57.60 members, £60.00 non-members
PEL/96
IEC 61558-2-6:2009(Edition 2)
Particular requirements and tests for safetyisolating transformers and power supply unitsincorporating safety isolating transformers£57.60 members, £60.00 non-members
PEL/96
IEC 61558-2-13:2009(Edition 2)
Particular requirements and tests for autotransformers and power supply unitsincorporating auto transformers£57.60 members, £60.00 non-members
PEL/96
IEC 61577:—Radiation protection instrumentation. Radonand radon decay product measuringinstruments
IEC 61577-4:2009Equipment for the production of referenceatmospheres containing radon isotopes andtheir decay products (STAR)£108.48 members, £113.00 non-members
NCE/2
IEC 61588:2009(Edition 2)
Precision clock synchronization protocol fornetworked measurement and control systems£256.32 members, £267.00 non-members
AMT/7
IEC 61676:—Medical electrical equipment. Dosimetricinstruments used for non-invasive measurementof X-ray tube voltage in diagnostic radiology
AMENDMENT 1:November 2008
to IEC 61676:2002£19.20 members, £20.00 non-members
CH/62/3
Update Standards Apr 2009 Prices may be subject to change. 63
ISO 7165:2009(Edition 2)
Fire fighting. Portable fire extinguishers.Performance and construction£137.28 members, £143.00 non-members
FSH/2
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO 8254:—Paper and board. Measurement of speculargloss
ISO 8254-1:2009(Edition 2)
75° gloss with a converging beam, TAPPImethod£57.60 members, £60.00 non-members
PAI/11
Will be implemented as an identical British Standard
ISO 8655:—Piston-operated volumetric apparatus
ISO 8655-1:—Terminology, general requirements and userrecommendations
CORRIGENDUM 1:December 2008
to ISO 8655-1:2002LBI/36/1
Will be implemented as an identical British Standard
ISO 8655-2:—Piston pipettes
CORRIGENDUM 1:December 2008
to ISO 8655-2:2002LBI/36/1
Will be implemented as an identical British Standard
ISO 8655-3:—Piston burettes
CORRIGENDUM 1:December 2008
to ISO 8655-3:2002LBI/36/1
Will be implemented as an identical British Standard
ISO 8655-4:—Dilutors
CORRIGENDUM 1:December 2008
to ISO 8655-4:2002LBI/36/1
Will be implemented as an identical British Standard
ISO 8655-5:—Dispensers
CORRIGENDUM 1:December 2008
to ISO 8655-5:2002LBI/36/1
Will be implemented as an identical British Standard
ISO 8655-6:—Gravimetric methods for the determination ofmeasurement error
CORRIGENDUM 1:December 2008
to ISO 8655-6:2002LBI/36/1
Will be implemented as an identical British Standard
ISO 1891:2009(Edition 2)
Fasteners. Terminology£194.88 members, £203.00 non-members
FME/9/2
Will be implemented as an identical British Standard
ISO 2575:—Road vehicles. Symbols for controls, indicatorsand tell-tales
AMENDMENT 4:February 2009
to ISO 2575:2004£14.40 members, £15.00 non-members
AUE/12
Will be implemented as an identical British Standardby amendment to a National Standard
ISO 2870:2009(Edition 3)
Surface active agents. Detergents.Determination of anionic-active matterhydrolysable and non-hydrolysable under acidconditions£45.12 members, £47.00 non-members
CII/34
Will be implemented as an identical British Standard
ISO 3356:2009(Edition 2)
Milk. Determination of alkaline phosphatase£50.88 members, £53.00 non-members
AW/5
Will be implemented as an identical British Standard
ISO 3927:—Metallic powders, excluding powders forhardmetals. Determination of compressibility inuniaxial compression
CORRIGENDUM 1:December 2008
to ISO 3927:2001ISE/65
Will be implemented as an identical British Standard
ISO 4180:2009Packaging. Complete, filled transport packages.General rules for the compilation ofperformance test schedules£79.68 members, £83.00 non-members
PKW/0/-/6
Will be implemented as an identical British Standard
ISO 6301:—Pneumatic fluid power. Compressed-airlubricators
ISO 6301-1:2009(Edition 3)
Main characteristics to be included in supplier’sliterature and product-marking requirements£50.88 members, £53.00 non-members
MCE/18/-/5
Will be implemented as an identical British Standard
IEC/PAS PUBLICATIONS
IEC/PAS 61169:—Radio-frequency connectors
IEC/PAS 61169-18:2009Sectional specification. Radio frequency coaxialconnectors of type SSMA£91.20 members, £95.00 non-members
EPL/46/2
IEC/PAS 61196-19:2009Sectional specification for SSMB series R.F.coaxial connectors£100.80 members, £105.00 non-members
EPL/46/2
IEC/PAS 61196-35:2009Sectional specification. Radio frequency coaxialconnectors of type 2,92£91.20 members, £95.00 non-members
EPL/46/2
ISO PUBLICATIONS
It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.
The following ISO publications areavailable from BSI Customer Services (see’How to order’ on page 2)
ISO 366:—Textile machinery and accessories. Reeds
ISO 366-2:2009(Edition 2)
Dimensions and designation of metal reedswith plate baulk£38.40 members, £40.00 non-members
TCI/33
Will be implemented as an identical British Standard
ISO 366-3:2009(Edition 2)
Dimensions and designation of metal reedswith double-spring baulk£38.40 members, £40.00 non-members
TCI/33
Will be implemented as an identical British Standard
ISO 834:—Fire-resistance tests. Elements of buildingconstruction
ISO 834-9:—Specific requirements for non-loadbearingceiling elements
CORRIGENDUM 1:February 2009
to ISO 834-9:2003FSH/22
Will be implemented as an identical British Standard
IEC/PAS Publications
64 Update Standards Apr 2009Prices may be subject to change.
ISO 10985:2009(Edition 3)
Caps made of aluminium-plastics combinationsfor infusion bottles and injection vials.Requirements and test methods£38.40 members, £40.00 non-members
CH/212
Will not be implemented as a British Standard
ISO 11014:2009Safety data sheet for chemical products.Content and order of sections£70.08 members, £73.00 non-members
CII/26
Will not be implemented as a British Standard
ISO/TS 11133:—Microbiology of food and animal feeding stuffs.Guidelines on preparation and production ofculture media
ISO/TS 11133-1:2009(Edition 2)
General guidelines on quality assurance for thepreparation of culture media in the laboratory£79.68 members, £83.00 non-members
AW/9
Will be implemented as an identical British Standard
ISO 11484:2009(Edition 2)
Steel products. Employer’s qualification systemfor non-destructive testing (NDT) personnel£74.88 members, £78.00 non-members
ISE/73/1
Will not be implemented as a British Standard
ISO 11783:—Tractors and machinery for agriculture andforestry. Serial control and communicationsdata network
ISO 11783-12:2009Diagnostics services£97.92 members, £102.00 non-members
AGE/6
Will be implemented as an identical British Standard
ISO/TR 12148:2009Natural gas. Calibration of chilled mirror typeinstruments for hydrocarbon dewpoint (liquidformation)£108.48 members, £113.00 non-members
PTI/15
Will be implemented as an identical British Standard
ISO 13041:—Test conditions for numerically controlledturning machines and turning centres
ISO 13041-3:2009Geometric tests for machines with invertedvertical workholding spindles£113.28 members, £118.00 non-members
MTE/1
Will be implemented as an identical British Standard
ISO 10263-5:2009(Edition 2)
Windscreen defrosting system test method£57.60 members, £60.00 non-members
B/513/1
Will be implemented as an identical British Standard
ISO 10263-6:2009(Edition 2)
Determination of effect of solar heating£38.40 members, £40.00 non-members
B/513/1
Will be implemented as an identical British Standard
ISO 10307:—Petroleum products. Total sediment in residualfuel oils
ISO 10307-1:2009(Edition 2)
Determination by hot filtration£50.88 members, £53.00 non-members
PTI/13
Will be implemented as an identical British Standard
ISO 10307-2:2009(Edition 2)
Determination using standard procedures forageing£45.12 members, £47.00 non-members
PTI/13
Will be implemented as an identical British Standard
ISO 10329:2009Coal. Determination of plastic properties.Constant-torque Gieseler plastometer method£65.28 members, £68.00 non-members
PTI/16
Will be implemented as an identical British Standard
ISO 10381:—Soil quality. Sampling
ISO 10381-6:2009(Edition 2)
Guidance on the collection, handling andstorage of soil under aerobic conditions for theassessment of microbiological processes,biomass and diversity in the laboratory£45.12 members, £47.00 non-members
EH/4
Will be implemented as an identical British Standard
ISO/IEC 10646:— (CD-ROM)Information technology. Universal Multiple-Octet Coded Character Set (UCS)
AMENDMENT 5:December 2008
to ISO/IEC 10646:2003£45.12 members, £47.00 non-members
IST/5
Will not be implemented as a British Standard
ISO 9445:—Continuously cold-rolled stainless steel.Tolerances on dimensions and form
ISO 9445-1:2009Narrow strip and cut lengths£50.88 members, £53.00 non-members
ISE/30
Will be implemented as an identical British Standard
ISO 9445-2:2009Wide strip and plate/sheet£57.60 members, £60.00 non-members
ISE/30
Will be implemented as an identical British Standard
ISO 9924-3:2009Hydrocarbon rubbers, halogenated rubbers andpolysiloxane rubbers after extraction£74.88 members, £78.00 non-members
PRI/23
Will be implemented as an identical British Standard
ISO/TR 10064:—Code of inspection practice
ISO/TR 10064-6:2009Bevel gear measurement methods£118.08 members, £123.00 non-members
MCE/5/-/2
Will be implemented as an identical British Standard
ISO 10263:—Earth-moving machinery. Operator enclosureenvironment
ISO 10263-1:2009(Edition 2)
Terms and definitions£38.40 members, £40.00 non-members
B/513/1
Will be implemented as an identical British Standard
ISO 10263-2:2009(Edition 2)
Air filter element test method£57.60 members, £60.00 non-members
B/513/1
Will be implemented as an identical British Standard
ISO 10263-3:2009(Edition 2)
Pressurization test method£38.40 members, £40.00 non-members
B/513/1
Will be implemented as an identical British Standard
ISO 10263-4:2009(Edition 2)
Heating, ventilating and air conditioning(HVAC) test method and performance£57.60 members, £60.00 non-members
B/513/1
Will be implemented as an identical British Standard
ISO Publications continued...
66 Update Standards Apr 2009Prices may be subject to change.
ISO/IEC TR 15446:2009(Edition 2)
Information technology. Security techniques.Guide for the production of Protection Profilesand Security Targets£166.08 members, £173.00 non-members
IST/33
Will be implemented as an identical British Standard
ISO 15836:2009(Edition 2)
Information and documentation. The DublinCore metadata element set£45.12 members, £47.00 non-members
IDT/2/7
Will be implemented as an identical British Standard
ISO/TS 15869:2009Gaseous hydrogen and hydrogen blends. Landvehicle fuel tanks£122.88 members, £128.00 non-members
PVE/3/8
Will be implemented as an identical British Standard
ISO 15877:—Plastics piping systems for hot and cold waterinstallations. Chlorinated poly(vinylchloride)(PVC-C)
ISO 15877-1:2009(Edition 2)
General£65.28 members, £68.00 non-members
PRI/88/2
Will be implemented as an identical British Standard
ISO 15877-2:2009(Edition 2)
Pipes£74.88 members, £78.00 non-members
PRI/88/2
Will be implemented as an identical British Standard
ISO 15877-3:2009(Edition 2)
Fittings£97.92 members, £102.00 non-members
PRI/88/2
Will be implemented as an identical British Standard
ISO 15877-5:2009(Edition 2)
Fitness for purpose of the system£57.60 members, £60.00 non-members
PRI/88/2
Will be implemented as an identical British Standard
ISO 15927:—Hygrothermal performance of buildings.Calculation and presentation of climatic data
ISO 15927-2:2009Hourly data for design cooling load£50.88 members, £53.00 non-members
B/540/8
Will be implemented as a related British Standard
ISO 14798:2009Lifts (elevators), escalators and moving walks.Risk assessment and reduction methodology£118.08 members, £123.00 non-members
MHE/4
Will be implemented as an identical British Standard
ISO/IEC 14888:—Information technology. Security techniques.Digital signatures with appendix
ISO/IEC 14888-3:—Discrete logarithm based mechanisms
CORRIGENDUM 2:February 2009
to ISO/IEC 14888-3:2006IST/33
Will be implemented as an identical British Standard
ISO 14896:2009(Edition 3)
Plastics. Polyurethane raw materials.Determination of isocyanate content£57.60 members, £60.00 non-members
PRI/42
Will be implemented as an identical British Standard
ISO 15008:2009(Edition 2)
Road vehicles. Ergonomic aspects of transportinformation and control systems. Specificationsand test procedures for in-vehicle visualpresentation£79.68 members, £83.00 non-members
EPL/278
Will be implemented as an identical British Standard
ISO 15212:—Oscillation-type density meters
ISO 15212-1:—Laboratory instruments
CORRIGENDUM 1:December 2008
to ISO 15212-1:1998LBI/36/4
Will be implemented as an identical British Standard
ISO 15212-2:—Process instruments for homogeneous liquids
CORRIGENDUM 1:December 2008
to ISO 15212-2:2002LBI/36/4
Will be implemented as an identical British Standard
ISO/IEC 15418:2009(Edition 2)
Information technology. Automaticidentification and data capture techniques. GS1Application Identifiers and ASC MH10 DataIdentifiers and maintenance£45.12 members, £47.00 non-members
IST/34
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO/IEC 13250:—Information technology. Topic maps
ISO/IEC 13250-4:2009Canonicalization£65.28 members, £68.00 non-members
IST/41
Will be implemented as an identical British Standard
ISO/IEC 13818:—Information technology. Generic coding ofmoving pictures and associated audioinformation
ISO/IEC 13818-1:—Systems
AMENDMENT 2:December 2008
to ISO/IEC 13818-1:2007£38.40 members, £40.00 non-members
IST/37
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO 14050:2009(Edition 3)
Environmental management. Vocabulary£206.40 members, £215.00 non-members
SES/1
Will be implemented as an identical British Standard
ISO/IEC 14496:—Information technology. Coding of audio-visualobjects
ISO/IEC 14496-4:—Conformance testing
AMENDMENT 30:February 2009
to ISO/IEC 14496-4:2004£14.40 members, £15.00 non-members
IST/37
Will not be implemented as a British Standard
ISO/IEC 14496-5:—Reference software
AMENDMENT 20:February 2009
to ISO/IEC 14496-5:2001£14.40 members, £15.00 non-members
IST/37
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO/IEC 14496-16:—Animation Framework eXtension (AFX)
AMENDMENT 2:February 2009
to ISO/IEC 14496-16:2006£131.52 members, £137.00 non-members
IST/37
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO 14524:2009(Edition 2)
Photography. Electronic still-picture cameras.Methods for measuring optoelectronicconversion functions (OECFs)£93.12 members, £97.00 non-members
CPW/42
Will be implemented as an identical British Standard
ISO Publications continued...
68 Update Standards Apr 2009Prices may be subject to change.
ISO/TR 19972:—Hydraulic fluid power. Methods to assess thereliability of hydraulic components
ISO/TR 19972-1:2009General procedures and calculation method£118.08 members, £123.00 non-members
MCE/18/-/8
Will not be implemented as a British Standard
ISO 20860:—Road vehicles. 50 ohms impedance radiofrequency connection system interface
ISO 20860-2:2009Test procedures£93.12 members, £97.00 non-members
AUE/9
Will be implemented as an identical British Standard
ISO 21072:—Ships and marine technology. Marineenvironment protection: performance testing ofoil skimmers
ISO 21072-1:2009Moving water conditions£74.88 members, £78.00 non-members
SME/32/-/2
Will be implemented as an identical British Standard
ISO 21531:2009Dentistry. Graphical symbols for dentalinstruments£70.08 members, £73.00 non-members
CH/106/4
Will be implemented as an identical British Standard
ISO 21789:2009Gas turbine applications. Safety£166.08 members, £173.00 non-members
MCE/16/-/1
Will be implemented as an identical British Standard
ISO 22089:2009Aerospace. Hydraulic power transfer units.General specifications£131.52 members, £137.00 non-members
ACE/69
Will be implemented as an identical British Standard
ISO 22794:2007(Edition 1)
Dentistry. Implantable materials for bone fillingand augmentation in oral and maxillofacialsurgery. Contents of a technical file£57.60 members, £60.00 non-members
CH/106/8
This is a corrected version.
Will be implemented as an identical British Standard
ISO 23065:2009Milk fat from enriched dairy products.Determination of omega-3 and omega-6 fattyacid content by gas-liquid chromatography£65.28 members, £68.00 non-members
AW/5
Will be implemented as an identical British Standard
ISO 18369:—Ophthalmic optics. Contact lenses
ISO 18369-1:—Vocabulary, classification system andrecommendations for labelling specifications
AMENDMENT 1:February 2009
to ISO 18369-1:2006£14.40 members, £15.00 non-members
CH/172/9
Will be implemented as an identical British Standard
ISO 18589:—Measurement of radioactivity in theenvironment. Soil
ISO 18589-4:2009Measurement of plutonium isotopes (plutonium238 and plutonium 239 + 240) by alphaspectrometry£93.12 members, £97.00 non-members
NCE/2
Will be implemented as an identical British Standard
ISO 18589-5:2009Measurement of strontium 90£108.48 members, £113.00 non-members
NCE/2
Will be implemented as an identical British Standard
ISO 18589-6:2009Measurement of gross alpha and gross betaactivities£65.28 members, £68.00 non-members
NCE/2
Will be implemented as an identical British Standard
ISO/TS 19036:—Microbiology of food and animal feeding stuffs.Guidelines for the estimation of measurementuncertainty for quantitative determinations
AMENDMENT 1:January 2009
to ISO/TS 19036:2006£14.40 members, £15.00 non-members
AW/9
Will be implemented as an identical British Standard
ISO 19115:—Geographic information. Metadata
ISO 19115-2:2009Extensions for imagery and gridded data£122.88 members, £128.00 non-members
IST/36
Will be implemented as an identical British Standard
ISO/IEC 19772:2009Information technology. Security techniques.Authenticated encryption£102.72 members, £107.00 non-members
IST/33
Will be implemented as an identical British Standard
ISO 15928:—Houses. Description of performance
ISO 15928-3:2009Structural durability£70.08 members, £73.00 non-members
B/500
Will not be implemented as a British Standard
ISO/IEC 15946:—Information technology. Security techniques.Cryptographic techniques based on ellipticcurves
ISO/IEC 15946-1:—General
CORRIGENDUM 1:February 2009
to ISO/IEC 15946-1:2008IST/33
Will be implemented as an identical British Standard
ISO/TS 16457:2009Space systems. Space environment (natural andartificial). The Earth’s ionosphere model:international reference ionosphere (IRI) modeland extensions to the plasmasphere£50.88 members, £53.00 non-members
ACE/68/-/4
Will be implemented as an identical British Standard
ISO 16653:—Mobile elevating work platforms. Designcalculations, safety requirements and testmethods relative to special features
ISO 16653-2:2009MEWPs with non-conductive (insulating)components£84.48 members, £88.00 non-members
MHE/12
Will be implemented as an identical British Standard
ISO 16663:—Fishing nets. Method of test for thedetermination of mesh size
ISO 16663-1:2009(Edition 2)
Opening of mesh£50.88 members, £53.00 non-members
TCI/77
Will be implemented as an identical British Standard
ISO 18117:2009Surface chemical analysis. Handling ofspecimens prior to analysis£57.60 members, £60.00 non-members
CII/60
Will be implemented as an identical British Standard
ISO 18213:—Nuclear fuel technology. Tank calibration andvolume determination for nuclear materialsaccountancy
ISO 18213-3:2009Statistical methods£131.52 members, £137.00 non-members
NCE/9
Will not be implemented as a British Standard
Update Standards Apr 2009 Prices may be subject to change. 69
ISO 28523:2009Ships and marine technology. Lubricating andhydraulic oil systems. Guidance for sampling todetermine cleanliness and particlecontamination£50.88 members, £53.00 non-members
SME/32/-/3
Will be implemented as an identical British Standard
ISO 28706:—Vitreous and porcelain enamels. Determinationof resistance to chemical corrosion
ISO 28706-3:2008Determination of resistance to chemicalcorrosion by alkaline liquids using a hexagonalvessel£79.68 members, £83.00 non-members
STI/33
Will be implemented as an identical British Standard
ISO/TS 29041:—Gas mixtures. Gravimetric preparation.Mastering correlations in composition
CORRIGENDUM 1:February 2009
to ISO/TS 29041:2008PTI/15
Will be implemented as an identical British Standard
ISO 29042:—Safety of machinery. Evaluation of the emissionof airborne hazardous substances
ISO 29042-2:2009Tracer gas method for the measurement of theemission rate of a given pollutant£50.88 members, £53.00 non-members
MCE/3
Will not be implemented as a British Standard
ISO 29042-3:2009Test bench method for the measurement of theemission rate of a given pollutant£50.88 members, £53.00 non-members
MCE/3
Will not be implemented as a British Standard
ISO 29042-4:2009Tracer method for the measurement of thecapture efficiency of an exhaust system£57.60 members, £60.00 non-members
MCE/3
Will not be implemented as a British Standard
ISO 29581:—Cement. Test methods
ISO 29581-1:2009Analysis by wet chemistry£131.52 members, £137.00 non-members
B/516/12
Will be implemented as an identical British Standard
ISO 25101:2009Water quality. Determination ofperfluorooctanesulfonate (PFOS) andperfluorooctanoate (PFOA). Method forunfiltered samples using solid phase extractionand liquid chromatography/mass spectrometry£84.48 members, £88.00 non-members
EH/3/2
Will be implemented as an identical British Standard
ISO 25902:—Titanium pipes and tubes. Non-destructivetesting
ISO 25902-1:2009Eddy-current examination£50.88 members, £53.00 non-members
NFE/35
Will be implemented as an identical British Standard
ISO 26865:2009Road vehicles. Brake lining friction materials.Standard performance test procedure forcommercial vehicles with air brakes£70.08 members, £73.00 non-members
AUE/11
Will be implemented as an identical British Standard
ISO 27467:2009Nuclear criticality safety. Analysis of apostulated criticality accident£50.88 members, £53.00 non-members
NCE/9
Will be implemented as an identical British Standard
ISO/TS 27687:2008(Edition 1)
Nanotechnologies. Terminology and definitionsfor nano-objects. Nanoparticle, nanofibre andnanoplate£50.88 members, £53.00 non-members
NTI/1
This is a corrected version.
Will be implemented as an identical British Standardby amendment to a National Standard
ISO 27996:2009Aerospace fluid systems. Elastomer seals.Storage and shelf life£50.88 members, £53.00 non-members
ACE/69
Will be implemented as an identical British Standard
ISO 28520:2009Ships and marine technology. Lubricating oilsystems. Guidance for grades of cleanliness andflushing£70.08 members, £73.00 non-members
SME/32/-/3
Will be implemented as an identical British Standard
ISO 28522:2009Ships and marine technology. Hydraulic oilsystems. Guidance for assembly and flushing£38.40 members, £40.00 non-members
SME/32/-/3
Will be implemented as an identical British Standard
ISO 23233:2009Rubber, vulcanized or thermoplastic.Determination of resistance to abrasion using adriven, vertical abrasive disc£65.28 members, £68.00 non-members
PRI/22
Will be implemented as an identical British Standard
ISO 23553:—Safety and control devices for oil burners andoil-burning appliances. Particular requirements
ISO 23553-1:—Shut-off devices for oil burners
CORRIGENDUM 1:February 2009
to ISO 23553-1:2007GSE/22
Will be implemented as an identical British Standard
ISO 23601:2009Safety identification. Escape and evacuationplan signs£70.08 members, £73.00 non-members
PH/8/1
Will not be implemented as a British Standard
ISO 23811:2009Paints and varnishes. Determination ofpercentage volume of non-volatile matter bymeasuring the non-volatile matter content andthe density of the coating material, andcalculation of the theoretical spreading rate£65.28 members, £68.00 non-members
STI/10
Will be implemented as an identical British Standard
ISO 24637:2009Space systems. Electromagnetic interference(EMI) test reporting requirements£57.60 members, £60.00 non-members
ACE/68/-/1
Will be implemented as an identical British Standard
ISO/IEC 24734:2009Information technology. Office equipment.Method for measuring digital copyingproductivity£122.88 members, £128.00 non-members
IST/3
Will be implemented as an identical British Standard
ISO/IEC 24735:2009Information technology. Office equipment.Method for measuring digital copying machineproductivity£108.48 members, £113.00 non-members
IST/3
Will be implemented as an identical British Standard
ISO/IEC TR 24785:2009Information technology. Taxonomy of culturaland linguistic adaptability user requirements£45.12 members, £47.00 non-members
ICT/-/1
Will not be implemented as a British Standard
ISO Publications continued...
70 Update Standards Apr 2009Prices may be subject to change.