British Standards - 2010

BS 3810 ..............................................................30

BS 4361 ........................................................31, 32

BS 4620 ..............................................................30

BS 4656 ..............................................................33

BS 4894 ..............................................................26

BS 5046 ..............................................................26

BS 5276 ........................................................26, 30

BS 5346 ..............................................................27

BS 5656 ..............................................................27

BS 5864 ..............................................................27

BS 5884 ..............................................................27

BS 6172 ..............................................................27

BS 6362 ..............................................................33

BS 6404 ..............................................................27

BS 6590 ..............................................................33

BS 6785 ..............................................................28

BS 6955 ........................................................18, 32

BS 7036 ..............................................................28

BS 7371 ..............................................................28

BS 7545 ........................................................17, 32

BS 7668 ..............................................................28

BS 7801 ..............................................................28

BS 7805 ..............................................................28

BS 7854 ........................................................17, 32

BS 7855 ..............................................................28

BS 7881 ..............................................................31

BS 7935 ..............................................................28

DD CEN/TS 14940 ..............................................19

BS EN 609 ..........................................................22

BS EN 778 ..........................................................12

BS EN 1218 ........................................................23

BS EN 1807 ........................................................23

BS EN 1870 ........................................................23

BS EN 1889 ........................................................23

BS EN 2240 ........................................................14

BS EN ISO 2740 ..................................................14

BS EN 2955 ........................................................22

BS EN ISO 3059 ..................................................34

BS EN 3464 ........................................................14

BS EN 3660 ........................................................14

BS EN 3730 ........................................................14

BS EN ISO 3907 ............................................14, 32

BS EN 3987 ........................................................14

BS EN 4113 ........................................................14

BS EN 4114 ........................................................14

BS EN 4234 ........................................................14

BS EN ISO 7500 ..................................................35

BS EN ISO 8044 ..................................................35

BS EN ISO 9934 ..................................................35

BS EN 10269 ......................................................22

BS EN 10349 ......................................................14

BS EN ISO 10438 ................................................35

BS EN ISO 10441 ................................................35

BS EN 12779 ......................................................23

BS EN ISO 13503 ................................................35

BS EN ISO 13703 ................................................35

BS EN ISO 13704 ................................................35

BS EN ISO 13849 ................................................35

BS EN ISO 13850 ................................................35

BS EN ISO 14224 ................................................36

BS EN ISO 14270 ................................................36

BS EN ISO 14272 ................................................36

BS EN ISO 14273 ................................................36

BS 7188 ..............................................................28

BS 8409 ........................................................12, 32

DD CEN/TS 15606 ..............................................19

BS EN ISO 927 ..............................................12, 32

BS EN 1176 ........................................................32

BS EN 1230 ........................................................12

BS EN ISO 2692 ..................................................34

BS EN ISO 5455 ..................................................34

BS EN ISO 11810 ................................................15

BS ISO 128 .........................................................37

BS ISO 8587 .......................................................37

BS ISO 11056 .....................................................37

BS ISO 15394 .....................................................18

BS ISO 16212 .....................................................38

BS ISO 16792 .....................................................38

DD ISO/TS 16610 ................................................38

Electrotechnical

BS 822 ................................................................24

BS 842 ................................................................24

BS 4177 ..............................................................26

BS 4999 ..............................................................24

BS 5266 ..............................................................26

BS 5285 ..............................................................27

BS 5685 ..............................................................30

BS 6133 ..............................................................27

BS 6259 ..............................................................27

BS 6290 ..............................................................32

BS 7647 ..............................................................28

BS 7697 ..............................................................28

BS 7856 ..............................................................28

BS 9000 ..............................................................31

BS EN ISO 24978 ................................................16

BS EN 60059 ......................................................23

BS EN 60384 ......................................................22

BS EN 60393 ................................................22, 32

BS EN 60598 ......................................................23

BS EN 60896 ................................................22, 32

BS EN 60950 ......................................................22

BS ISO 10596 .....................................................17

BS ISO 14813 .....................................................18

BS ISO 22179 .....................................................18

BS ISO 22472 .....................................................38

BS ISO 24097 .....................................................18

BS CECC 41000 ..................................................32

PD CLC/TR 50373 ...............................................29

PD CLC/TR 50422 ...............................................29

Engineering

BS 131 ................................................................24

BS 275 ................................................................30

BS 460 ................................................................22

BS 641 ................................................................30

BS 1109 ..............................................................30

BS 1127 ..............................................................24

BS 1407 ..............................................................25

BS 1449 ..............................................................25

BS 1660 ..............................................................25

BS 1974 ..............................................................30

BS 2772 ..............................................................26

BS 3015 ........................................................17, 31

BS 3575 ..............................................................30

The following British Standards are listed orreferred to in this issue of Update Standardswith the exception of those in ‘New WorkStarted’.

Building and civil engineering

BS 41 ..................................................................24

BS 65 ..................................................................24

BS 493 ................................................................24

BS 567 ................................................................24

BS 598 ................................................................24

BS 835 ................................................................24

BS 1377 ........................................................24, 25

BS 4315 ..............................................................26

BS 4787 ..............................................................26

BS 5422 ..............................................................22

BS 5507 ..............................................................27

BS 5642 ..............................................................27

BS 5854 ..............................................................27

BS 5950 ........................................................24, 27

BS 5977 ..............................................................27

BS 6037 ..............................................................27

BS 6999 ..............................................................28

BS 8000 ..............................................................28

BS 8008 ..............................................................28

BS 8102 ..............................................................12

BS 8103 ..............................................................12

BS 8204 ..............................................................29

BS 8427 ..............................................................29

BS EN 934 ..........................................................12

BS EN ISO 11091 ................................................35

BS EN 14023 ......................................................49

BS EN ISO 15927 ................................................16

BS EN ISO 19903 ................................................36

BS EN ISO 19904 ................................................37

BS ISO 128 .........................................................37

BS ISO 1920 .......................................................16

BS ISO 14401 .....................................................18

PD CEN/TR 15894 ...............................................19

PD 6682 .............................................................19

PD 6688 .............................................................19

NA to BS EN 1993 ...............................................12

Consumer products and services

BS 308 ................................................................34

BS 870 ................................................................22

BS 1054 ..............................................................24

BS 1347 ..............................................................24

BS 2457 ..............................................................26

BS 2459 ..............................................................26

BS 3459 ..............................................................26

BS 3509 ..............................................................26

BS 4358 ..............................................................26

BS 4484 ..............................................................26

BS 4585 ........................................................12, 32

BS 4672 ..............................................................30

BS 4875 ..............................................................26

BS 5459 ..............................................................27

BS 6049 ..............................................................33

BS 6325 ..............................................................33

BS 6381 ..............................................................27

BS 6986 ..............................................................33

BS 7172 ..............................................................28

British Standards – Quick Reference Guide

4 Update Standards Jan 2010Prices may be subject to change.

BS TA 47 .............................................................21

BS 2TA 47 ...........................................................21

BS 2TA 48 ...........................................................21

BS TA 48 .............................................................21

BS 2TA 49 ...........................................................21

BS TA 49 .............................................................21

BS 2TA 50 ...........................................................21

BS TA 50 .............................................................21

BS 2TA 51 ...........................................................21

BS TA 51 .............................................................21

BS TA 52 .............................................................21

BS 2TA 52 ...........................................................21

BS TA 56 .............................................................22

BS 2TA 56 ...........................................................22

BS TA 57 .............................................................22

BS 2TA 57 ...........................................................22

BS 2TA 58 ...........................................................22

BS TA 58 .............................................................22

BS 2TA 59 ...........................................................22

BS TA 59 .............................................................22

BS 2TA 100 .........................................................22

BS 3TA 100 .........................................................22

BS AU 50 ............................................................38

BS AU 170 ..........................................................30

BS AU 206 ..........................................................38

BS AU 233 ..........................................................38

Health and environment

BS 2738 ..............................................................26

BS 5682 ..............................................................27

BS 6068 .....................................33, 34, 35, 36, 37

BS 6165 ..............................................................27

BS 6643 ..............................................................27

BS 6734 ..............................................................28

BS 6788 ..............................................................28

BS 7208 ..............................................................30

BS 7899 ..............................................................28

BS 7971 ..............................................................28

BS 8428 ..............................................................29

BS 8468 ..............................................................12

DD 180 ...............................................................29

DD CEN/TS 15674 ..............................................36

DD CEN/TS 15675 ..............................................36

BS EN ISO 140 ....................................................34

BS EN 455 ..........................................................12

BS EN 794 ..........................................................22

BS EN 1639 ........................................................14

BS EN 1640 ........................................................14

BS EN 1641 ........................................................14

BS EN 1642 ........................................................14

BS EN ISO 3822 ..................................................34

BS EN ISO 4049 ..................................................14

BS EN ISO 5667 ..................................................34

BS EN ISO 5961 ..................................................34

BS EN ISO 6222 ..................................................35

BS EN ISO 7027 ..................................................35

BS EN ISO 7886 ..................................................14

BS EN ISO 7980 ..................................................35

BS EN ISO 9963 ..................................................35

BS EN ISO 11980 ................................................15

BS EN 13501 ......................................................23

BS EN ISO 13716 ................................................35

BS 2B 30 .............................................................20

BS 3B 30 .............................................................20

BS 3B 31 .............................................................20

BS 2B 31 .............................................................20

BS 3B 32 .............................................................20

BS 2B 32 .............................................................20

BS 3B 33 .............................................................20

BS 2B 33 .............................................................20

BS L 170 .............................................................31

BS 5X 17 ............................................................31

BS HC 401 ..........................................................31

BS HC 402 ..........................................................31

BS 2HR 201 ........................................................20

BS 3HR 201 ........................................................20

BS 2HR 202 ........................................................20

BS 3HR 202 ........................................................20

BS HR 203 ..........................................................20

BS 2HR 203 ........................................................20

BS 2HR 204 ........................................................20

BS HR 204 ..........................................................20

BS 2HR 205 ........................................................20

BS HR 205 ..........................................................20

BS 2HR 206 ........................................................20

BS HR 206 ..........................................................20

BS 2HR 207 ........................................................20

BS HR 207 ..........................................................20

BS 2HR 208 ........................................................20

BS HR 208 ..........................................................20

BS SP 57 and 58 .................................................31

BS 2TA 1 .............................................................20

BS 3TA 1 .............................................................20

BS 2TA 2 .............................................................21

BS 3TA 2 .............................................................21

BS 2TA 6 .............................................................21

BS 3TA 6 .............................................................21

BS 2TA 7 .............................................................21

BS 3TA 7 .............................................................21

BS 2TA 10 ...........................................................21

BS 3TA 10 ...........................................................21

BS 2TA 11 ...........................................................21

BS 3TA 11 ...........................................................21

BS 2TA 12 ...........................................................21

BS 3TA 12 ...........................................................21

BS 3TA 13 ...........................................................21

BS 2TA 13 ...........................................................21

BS 2TA 21 ...........................................................21

BS 3TA 21 ...........................................................21

BS 2TA 28 ...........................................................21

BS 3TA 28 ...........................................................21

BS TA 38 .............................................................21

BS 2TA 38 ...........................................................21

BS 2TA 39 ...........................................................21

BS TA 39 .............................................................21

BS 2TA 40 ...........................................................21

BS TA 40 .............................................................21

BS 2TA 41 ...........................................................21

BS TA 41 .............................................................21

BS TA 42 .............................................................21

BS 2TA 42 ...........................................................21

BS 2TA 45 ...........................................................21

BS TA 45 .............................................................21

BS 2TA 46 ...........................................................21

BS TA 46 .............................................................21

BS EN ISO 14731 ................................................36

BS EN ISO 15011 ................................................15

BS EN ISO 15138 ................................................36

BS EN ISO 15156 ................................................15

BS EN 15503 ......................................................15

BS EN 15714 ......................................................16

BS EN ISO 15792 ................................................36

BS EN ISO 17776 ................................................36

BS EN ISO 21952 ................................................37

BS EN 23907 ................................................14, 32

BS EN ISO 24598 ................................................37

BS EN ISO 28139 ................................................16

BS ISO 230 .........................................................37

BS ISO 2041 .................................................17, 31

BS ISO 4190 .......................................................37

BS ISO 4229 .......................................................17

BS ISO 4395 .......................................................17

BS ISO 5468 .......................................................29

BS ISO 7637 .......................................................37

BS ISO 7919 .......................................................17

BS ISO 8178 .................................................19, 22

BS ISO 8407 .................................................17, 32

BS ISO 8820 .......................................................37

BS ISO 10643 .....................................................17

BS ISO 10770 .....................................................17

BS ISO 10816 ...............................................17, 32

BS ISO 10975 .....................................................17

BS ISO 11012 .....................................................17

BS ISO 11451 .....................................................37

BS ISO 11452 .....................................................37

BS ISO 11898 .....................................................38

BS ISO 13041 .....................................................38

BS ISO 13985 .....................................................38

BS ISO 16063 ...............................................18, 32

BS ISO 16750 .....................................................38

BS ISO 17832 .....................................................18

BS ISO 19072 .....................................................38

BS ISO 21849 .....................................................38

BS ISO 22089 .....................................................18

BS ISO 22915 .....................................................18

BS ISO 24497 .....................................................38

BS ISO 24631 ...............................................18, 19

DD ISO/TS 21220 ................................................19

DD ISO/TS 24817 ................................................38

PD 6433 .............................................................29

PD 6439 .............................................................29

PD 6510 .............................................................31

PD 8010 .............................................................30

PD ISO/TR 10809 ................................................19

BS 2B 23 .............................................................20

BS B 23 ...............................................................20

BS 2B 24 .............................................................20

BS B 24 ...............................................................20

BS 3B 25 .............................................................20

BS 2B 25 .............................................................20

BS 2B 26 .............................................................20

BS 3B 26 .............................................................20

BS 3B 27 .............................................................20

BS 2B 27 .............................................................20

BS 3B 28 .............................................................20

BS 2B 28 .............................................................20

BS 3B 29 .............................................................20

BS 2B 29 .............................................................20

Update Standards Jan 2010 Prices may be subject to change. 5

British Standards – Quick Reference Guide continued...

BS EN ISO 7784 ..................................................35

BS EN ISO 8501 ..................................................35

BS EN ISO 8504 ..................................................35

BS EN ISO 9073 ..................................................14

BS EN ISO 9117 ............................................14, 32

BS EN ISO 9706 ..................................................35

BS EN ISO 9902 ..................................................23

BS EN ISO 11111 ................................................23

BS EN ISO 11126 ................................................35

BS EN ISO 11138 ................................................15

BS EN ISO 11140 ................................................15

BS EN ISO 11357 ................................................15

BS EN ISO 11507 ................................................35

BS EN ISO 11997 ................................................35

BS EN ISO 12213 ................................................35

BS EN ISO 12944 ................................................35

BS EN 13060 ......................................................23

BS EN ISO 13479 ................................................15

BS EN 13523 ......................................................15

BS EN ISO 13803 ................................................35

BS EN 14180 ......................................................23

BS EN 14232 ................................................15, 32

BS EN ISO 14680 ................................................36

BS EN ISO 15181 ................................................36

BS EN ISO 15318 ................................................36

BS EN 15376 ......................................................23

BS EN ISO 15403 ................................................36

BS EN ISO 15528 ................................................36

BS EN 15749 ................................................16, 32

BS EN 15779 ......................................................16

BS EN ISO 16276 ................................................36

BS EN ISO 16773 ..........................................16, 36

BS EN ISO 17132 ................................................36

BS EN ISO 17872 ................................................36

BS EN 20287 ................................................12, 32

BS EN ISO 21227 ................................................37

BS EN ISO 28199 ................................................16

BS EN 29117 ................................................14, 32

DD ENV 14232 .............................................15, 32

BS ISO 2470 .................................................17, 32

BS ISO 2471 .......................................................17

BS ISO 2834 .......................................................17

BS ISO 3688 .......................................................37

BS ISO 4918 .......................................................32

BS ISO 6145 .......................................................17

BS ISO 7404 .................................................17, 32

BS ISO 10716 .....................................................37

BS ISO 11093 .....................................................37

BS ISO 11108 .....................................................37

BS ISO 12635 .....................................................18

BS ISO 13322 .....................................................38

BS ISO 13542 .....................................................38

BS ISO 15901 .....................................................38

BS ISO 17560 .....................................................29

BS ISO 20341 .....................................................29

BS ISO 23874 .....................................................38

BS ISO 26842 .....................................................19

BS ISO 28178 .....................................................19

PD ISO/TR 16268 ................................................19

PD ISO/TR 24699 ................................................19

PD 0028 .............................................................29

PD 6505 .............................................................31

PD 6631 .............................................................29

PD 6777 .............................................................29

Management systems

BS 350 ................................................................24

BS 4899 ..............................................................31

BS ISO 22514 .....................................................18

PD 6461 .............................................................29

PD 7500 .............................................................29

PD 7501 .............................................................29

PD 7502 .............................................................30

PD 7503 .............................................................30

Materials and chemicals

BS 797 ................................................................25

BS 1428 ..............................................................25

BS 2000 .................................................16, 25, 26

BS 2543 ..............................................................26

BS 2782 ........................................................15, 26

BS 2975 ..............................................................26

BS 3129 ..............................................................30

BS 3483 ........................................................12, 31

BS 3680 ..............................................................33

BS 3900 ...........................................33, 34, 35, 36

BS 4499 ..............................................................33

BS 4747 ..............................................................33

BS 5248 ..............................................................26

BS 5252 ..............................................................26

BS 5867 ..............................................................27

BS 5898 ..............................................................33

BS 6127 ........................................................17, 32

BS 6806 ..............................................................28

BS 7030 ..............................................................33

BS 7034 ........................................................33, 34

BS 7079 ..............................................................35

BS 7114 ..............................................................30

BS 7332 ..............................................................30

BS 7463 ..............................................................34

BS 7709 ..............................................................34

BS 7956 ..............................................................28

BS 5252F ............................................................29

DD 234 ...............................................................34

DD CEN/TS 15749 ........................................16, 32

BS EN ISO 287 ..............................................12, 32

BS EN ISO 787 ..............................................12, 31

BS EN ISO 801 ....................................................34

BS EN 937 ..........................................................12

BS EN 973 ..........................................................12

BS EN ISO 1402 ..................................................12

BS EN 1405 ........................................................12

BS EN 1406 ........................................................12

BS EN 1422 ........................................................23

BS EN ISO 1524 ..................................................34

BS EN ISO 1890 ..................................................14

BS EN ISO 2808 ..................................................34

BS EN ISO 2812 ..................................................34

BS EN ISO 3678 ..................................................34

BS EN ISO 4623 ..................................................34

BS EN ISO 5267 ..................................................34

BS EN ISO 7579 ..................................................14

BS EN ISO 14402 ................................................36

BS EN ISO 14505 ................................................36

BS EN ISO 14607 ................................................15

BS EN ISO 14630 ................................................15

BS EN 14662 ......................................................29

BS EN 14884 ......................................................36

BS EN 15269 ......................................................15

BS EN ISO 15535 ................................................36

BS EN 15657 ......................................................16

BS EN ISO 15841 ................................................36

BS EN ISO 16000 ................................................29

BS EN ISO 16266 ................................................36

BS EN ISO 20776 ................................................37

BS EN ISO 21427 ................................................37

BS EN ISO 21649 ................................................16

BS EN ISO 22032 ................................................37

BS EN ISO 22674 ................................................37

BS EN 29052 ......................................................37

BS ISO 6107 .......................................................37

BS ISO 7176 .......................................................37

BS ISO 7199 .......................................................17

BS ISO 11564 .....................................................38

BS ISO 11632 .....................................................38

BS ISO 11663 .....................................................18

BS ISO 13959 .....................................................18

BS ISO 14242 .....................................................18

BS ISO 15553 .....................................................38

BS ISO 15674 .....................................................18

BS ISO 15675 .....................................................18

BS ISO 20282 .....................................................38

BS ISO 25518 .....................................................19

BS ISO 26722 .....................................................19

BS ISO 28077 .....................................................38

DD ISO/TS 5658 ..................................................37

DD ISO/TS 11080 ................................................19

PD 6503 .............................................................29

Information systems

BS 2979 ..............................................................26

BS 4280 ..............................................................26

BS 4811 ..............................................................26

BS 4812 ..............................................................26

BS 5605 ..............................................................27

BS 6371 ..............................................................27

BS 7014 ..............................................................28

BS 7581 ..............................................................28

BS EN ISO/IEC 19796 ....................................16, 22

BS EN ISO 2806 ..................................................34

BS EN ISO 3166 ..................................................34

BS ISO/IEC 9281 .................................................37

BS ISO 10303 .....................................................37

BS ISO 10754 .....................................................37

BS ISO/IEC 11693 ...............................................18

BS ISO/IEC TR 14759 ..........................................38

BS ISO 15511 .....................................................18

BS ISO/IEC 24713 ...............................................19

DD ISO/TS 22224 ................................................19

PD 0006 .............................................................29

PD 0016 .............................................................29

PD 0017 .............................................................29

PD 0018 .............................................................29

PD 0023 .............................................................29

British Standards – Quick Reference Guide continued...


BS 7668 ..............................................................28

BS 7697 ..............................................................28

BS 7709 ..............................................................34

BS 7801 ..............................................................28

BS 7805 ..............................................................28

BS 7854 ........................................................17, 32

BS 7855 ..............................................................28

BS 7856 ..............................................................28

BS 7881 ..............................................................31

BS 7899 ..............................................................28

BS 7935 ..............................................................28

BS 7956 ..............................................................28

BS 7971 ..............................................................28

BS 8000 ..............................................................28

BS 8008 ..............................................................28

BS 8102 ..............................................................12

BS 8103 ..............................................................12

BS 8204 ..............................................................29

BS 8409 ........................................................12, 32

BS 8427 ..............................................................29

BS 8428 ..............................................................29

BS 8468 ..............................................................12

BS 9000 ..............................................................31

BS 5252F ............................................................29

DD 180 ...............................................................29

DD 234 ...............................................................34

DD CEN/TS 14940 ..............................................19

DD CEN/TS 15606 ..............................................19

DD CEN/TS 15674 ..............................................36

DD CEN/TS 15675 ..............................................36

DD CEN/TS 15749 ........................................16, 32

BS EN ISO 140 ....................................................34

BS EN ISO 287 ..............................................12, 32

BS EN 455 ..........................................................12

BS EN 609 ..........................................................22

BS EN 778 ..........................................................12

BS EN ISO 787 ..............................................12, 31

BS EN 794 ..........................................................22

BS EN ISO 801 ....................................................34

BS EN ISO 927 ..............................................12, 32

BS EN 934 ..........................................................12

BS EN 937 ..........................................................12

BS EN 973 ..........................................................12

BS EN ISO/IEC 19796 ....................................16, 22

BS EN 1176 ........................................................32

BS EN 1218 ........................................................23

BS EN 1230 ........................................................12

BS EN ISO 1402 ..................................................12

BS EN 1405 ........................................................12

BS EN 1406 ........................................................12

BS EN 1422 ........................................................23

BS EN ISO 1524 ..................................................34

BS EN 1639 ........................................................14

BS EN 1640 ........................................................14

BS EN 1641 ........................................................14

BS EN 1642 ........................................................14

BS EN 1807 ........................................................23

BS EN 1870 ........................................................23

BS EN 1889 ........................................................23

BS EN ISO 1890 ..................................................14

BS EN 2240 ........................................................14

BS EN ISO 2692 ..................................................34

BS EN ISO 2740 ..................................................14

BS 4894 ..............................................................26

BS 4899 ..............................................................31

BS 4999 ..............................................................24

BS 5046 ..............................................................26

BS 5248 ..............................................................26

BS 5252 ..............................................................26

BS 5266 ..............................................................26

BS 5276 ........................................................26, 30

BS 5285 ..............................................................27

BS 5346 ..............................................................27

BS 5422 ..............................................................22

BS 5459 ..............................................................27

BS 5507 ..............................................................27

BS 5605 ..............................................................27

BS 5642 ..............................................................27

BS 5656 ..............................................................27

BS 5682 ..............................................................27

BS 5685 ..............................................................30

BS 5854 ..............................................................27

BS 5864 ..............................................................27

BS 5867 ..............................................................27

BS 5884 ..............................................................27

BS 5898 ..............................................................33

BS 5950 ........................................................24, 27

BS 5977 ..............................................................27

BS 6037 ..............................................................27

BS 6049 ..............................................................33

BS 6068 .....................................33, 34, 35, 36, 37

BS 6127 ........................................................17, 32

BS 6133 ..............................................................27

BS 6165 ..............................................................27

BS 6172 ..............................................................27

BS 6259 ..............................................................27

BS 6290 ..............................................................32

BS 6325 ..............................................................33

BS 6362 ..............................................................33

BS 6371 ..............................................................27

BS 6381 ..............................................................27

BS 6404 ..............................................................27

BS 6590 ..............................................................33

BS 6643 ..............................................................27

BS 6734 ..............................................................28

BS 6785 ..............................................................28

BS 6788 ..............................................................28

BS 6806 ..............................................................28

BS 6955 ........................................................18, 32

BS 6986 ..............................................................33

BS 6999 ..............................................................28

BS 7014 ..............................................................28

BS 7030 ..............................................................33

BS 7034 ........................................................33, 34

BS 7036 ..............................................................28

BS 7079 ..............................................................35

BS 7114 ..............................................................30

BS 7172 ..............................................................28

BS 7188 ..............................................................28

BS 7208 ..............................................................30

BS 7332 ..............................................................30

BS 7371 ..............................................................28

BS 7463 ..............................................................34

BS 7545 ........................................................17, 32

BS 7581 ..............................................................28

BS 7647 ..............................................................28

Alpha-numeric sequence of BritishStandards quoted in this issue

BS 41 ..................................................................24

BS 65 ..................................................................24

BS 131 ................................................................24

BS 275 ................................................................30

BS 308 ................................................................34

BS 350 ................................................................24

BS 460 ................................................................22

BS 493 ................................................................24

BS 567 ................................................................24

BS 598 ................................................................24

BS 641 ................................................................30

BS 797 ................................................................25

BS 822 ................................................................24

BS 835 ................................................................24

BS 842 ................................................................24

BS 870 ................................................................22

BS 1054 ..............................................................24

BS 1109 ..............................................................30

BS 1127 ..............................................................24

BS 1347 ..............................................................24

BS 1377 ........................................................24, 25

BS 1407 ..............................................................25

BS 1428 ..............................................................25

BS 1449 ..............................................................25

BS 1660 ..............................................................25

BS 1974 ..............................................................30

BS 2000 .................................................16, 25, 26

BS 2457 ..............................................................26

BS 2459 ..............................................................26

BS 2543 ..............................................................26

BS 2738 ..............................................................26

BS 2772 ..............................................................26

BS 2782 ........................................................15, 26

BS 2975 ..............................................................26

BS 2979 ..............................................................26

BS 3015 ........................................................17, 31

BS 3129 ..............................................................30

BS 3459 ..............................................................26

BS 3483 ........................................................12, 31

BS 3509 ..............................................................26

BS 3575 ..............................................................30

BS 3680 ..............................................................33

BS 3810 ..............................................................30

BS 3900 ...........................................33, 34, 35, 36

BS 4177 ..............................................................26

BS 4280 ..............................................................26

BS 4315 ..............................................................26

BS 4358 ..............................................................26

BS 4361 ........................................................31, 32

BS 4484 ..............................................................26

BS 4499 ..............................................................33

BS 4585 ........................................................12, 32

BS 4620 ..............................................................30

BS 4656 ..............................................................33

BS 4672 ..............................................................30

BS 4747 ..............................................................33

BS 4787 ..............................................................26

BS 4811 ..............................................................26

BS 4812 ..............................................................26

BS 4875 ..............................................................26

Alpha-numeric sequence of British Standards


BS EN 60598 ......................................................23

BS EN 60896 ................................................22, 32

BS EN 60950 ......................................................22

DD ENV 14232 .............................................15, 32

BS ISO 128 .........................................................37

BS ISO 230 .........................................................37

BS ISO 1920 .......................................................16

BS ISO 2041 .................................................17, 31

BS ISO 2470 .................................................17, 32

BS ISO 2471 .......................................................17

BS ISO 2834 .......................................................17

BS ISO 3688 .......................................................37

BS ISO 4190 .......................................................37

BS ISO 4229 .......................................................17

BS ISO 4395 .......................................................17

BS ISO 4918 .......................................................32

BS ISO 5468 .......................................................29

BS ISO 6107 .......................................................37

BS ISO 6145 .......................................................17

BS ISO 7176 .......................................................37

BS ISO 7199 .......................................................17

BS ISO 7404 .................................................17, 32

BS ISO 7637 .......................................................37

BS ISO 7919 .......................................................17

BS ISO 8178 .................................................19, 22

BS ISO 8407 .................................................17, 32

BS ISO 8587 .......................................................37

BS ISO 8820 .......................................................37

BS ISO/IEC 9281 .................................................37

BS ISO 10303 .....................................................37

BS ISO 10596 .....................................................17

BS ISO 10643 .....................................................17

BS ISO 10716 .....................................................37

BS ISO 10754 .....................................................37

BS ISO 10770 .....................................................17

BS ISO 10816 ...............................................17, 32

BS ISO 10975 .....................................................17

BS ISO 11012 .....................................................17

BS ISO 11056 .....................................................37

BS ISO 11093 .....................................................37

BS ISO 11108 .....................................................37

BS ISO 11451 .....................................................37

BS ISO 11452 .....................................................37

BS ISO 11564 .....................................................38

BS ISO 11632 .....................................................38

BS ISO 11663 .....................................................18

BS ISO/IEC 11693 ...............................................18

BS ISO 11898 .....................................................38

BS ISO 12635 .....................................................18

BS ISO 13041 .....................................................38

BS ISO 13322 .....................................................38

BS ISO 13542 .....................................................38

BS ISO 13959 .....................................................18

BS ISO 13985 .....................................................38

BS ISO 14242 .....................................................18

BS ISO 14401 .....................................................18

BS ISO/IEC TR 14759 ..........................................38

BS ISO 14813 .....................................................18

BS ISO 15394 .....................................................18

BS ISO 15511 .....................................................18

BS ISO 15553 .....................................................38

BS ISO 15674 .....................................................18

BS ISO 15675 .....................................................18

BS EN ISO 13803 ................................................35

BS EN ISO 13849 ................................................35

BS EN ISO 13850 ................................................35

BS EN 14023 ......................................................49

BS EN 14180 ......................................................23

BS EN ISO 14224 ................................................36

BS EN 14232 ................................................15, 32

BS EN ISO 14270 ................................................36

BS EN ISO 14272 ................................................36

BS EN ISO 14273 ................................................36

BS EN ISO 14402 ................................................36

BS EN ISO 14505 ................................................36

BS EN ISO 14607 ................................................15

BS EN ISO 14630 ................................................15

BS EN 14662 ......................................................29

BS EN ISO 14680 ................................................36

BS EN ISO 14731 ................................................36

BS EN 14884 ......................................................36

BS EN ISO 15011 ................................................15

BS EN ISO 15138 ................................................36

BS EN ISO 15156 ................................................15

BS EN ISO 15181 ................................................36

BS EN 15269 ......................................................15

BS EN ISO 15318 ................................................36

BS EN 15376 ......................................................23

BS EN ISO 15403 ................................................36

BS EN 15503 ......................................................15

BS EN ISO 15528 ................................................36

BS EN ISO 15535 ................................................36

BS EN 15657 ......................................................16

BS EN 15714 ......................................................16

BS EN 15749 ................................................16, 32

BS EN 15779 ......................................................16

BS EN ISO 15792 ................................................36

BS EN ISO 15841 ................................................36

BS EN ISO 15927 ................................................16

BS EN ISO 16000 ................................................29

BS EN ISO 16266 ................................................36

BS EN ISO 16276 ................................................36

BS EN ISO 16773 ..........................................16, 36

BS EN ISO 17132 ................................................36

BS EN ISO 17776 ................................................36

BS EN ISO 17872 ................................................36

BS EN ISO 19903 ................................................36

BS EN ISO 19904 ................................................37

BS EN 20287 ................................................12, 32

BS EN ISO 20776 ................................................37

BS EN ISO 21227 ................................................37

BS EN ISO 21427 ................................................37

BS EN ISO 21649 ................................................16

BS EN ISO 21952 ................................................37

BS EN ISO 22032 ................................................37

BS EN ISO 22674 ................................................37

BS EN 23907 ................................................14, 32

BS EN ISO 24598 ................................................37

BS EN ISO 24978 ................................................16

BS EN ISO 28139 ................................................16

BS EN ISO 28199 ................................................16

BS EN 29052 ......................................................37

BS EN 29117 ................................................14, 32

BS EN 60059 ......................................................23

BS EN 60384 ......................................................22

BS EN 60393 ................................................22, 32

BS EN ISO 2806 ..................................................34

BS EN ISO 2808 ..................................................34

BS EN ISO 2812 ..................................................34

BS EN 2955 ........................................................22

BS EN ISO 3059 ..................................................34

BS EN ISO 3166 ..................................................34

BS EN 3464 ........................................................14

BS EN 3660 ........................................................14

BS EN ISO 3678 ..................................................34

BS EN 3730 ........................................................14

BS EN ISO 3822 ..................................................34

BS EN ISO 3907 ............................................14, 32

BS EN 3987 ........................................................14

BS EN ISO 4049 ..................................................14

BS EN 4113 ........................................................14

BS EN 4114 ........................................................14

BS EN 4234 ........................................................14

BS EN ISO 4623 ..................................................34

BS EN ISO 5267 ..................................................34

BS EN ISO 5455 ..................................................34

BS EN ISO 5667 ..................................................34

BS EN ISO 5961 ..................................................34

BS EN ISO 6222 ..................................................35

BS EN ISO 7027 ..................................................35

BS EN ISO 7500 ..................................................35

BS EN ISO 7579 ..................................................14

BS EN ISO 7784 ..................................................35

BS EN ISO 7886 ..................................................14

BS EN ISO 7980 ..................................................35

BS EN ISO 8044 ..................................................35

BS EN ISO 8501 ..................................................35

BS EN ISO 8504 ..................................................35

BS EN ISO 9073 ..................................................14

BS EN ISO 9117 ............................................14, 32

BS EN ISO 9706 ..................................................35

BS EN ISO 9902 ..................................................23

BS EN ISO 9934 ..................................................35

BS EN ISO 9963 ..................................................35

BS EN 10269 ......................................................22

BS EN 10349 ......................................................14

BS EN ISO 10438 ................................................35

BS EN ISO 10441 ................................................35

BS EN ISO 11091 ................................................35

BS EN ISO 11111 ................................................23

BS EN ISO 11126 ................................................35

BS EN ISO 11138 ................................................15

BS EN ISO 11140 ................................................15

BS EN ISO 11357 ................................................15

BS EN ISO 11507 ................................................35

BS EN ISO 11810 ................................................15

BS EN ISO 11980 ................................................15

BS EN ISO 11997 ................................................35

BS EN ISO 12213 ................................................35

BS EN 12779 ......................................................23

BS EN ISO 12944 ................................................35

BS EN 13060 ......................................................23

BS EN ISO 13479 ................................................15

BS EN 13501 ......................................................23

BS EN ISO 13503 ................................................35

BS EN 13523 ......................................................15

BS EN ISO 13703 ................................................35

BS EN ISO 13704 ................................................35

BS EN ISO 13716 ................................................35

Alpha-numeric sequence of British Standards continued...


BS TA 39 .............................................................21

BS TA 40 .............................................................21

BS 2TA 40 ...........................................................21

BS TA 41 .............................................................21

BS 2TA 41 ...........................................................21

BS TA 42 .............................................................21

BS 2TA 42 ...........................................................21

BS 2TA 45 ...........................................................21

BS TA 45 .............................................................21

BS 2TA 46 ...........................................................21

BS TA 46 .............................................................21

BS 2TA 47 ...........................................................21

BS TA 47 .............................................................21

BS 2TA 48 ...........................................................21

BS TA 48 .............................................................21

BS TA 49 .............................................................21

BS 2TA 49 ...........................................................21

BS TA 50 .............................................................21

BS 2TA 50 ...........................................................21

BS 2TA 51 ...........................................................21

BS TA 51 .............................................................21

BS 2TA 52 ...........................................................21

BS TA 52 .............................................................21

BS 2TA 56 ...........................................................22

BS TA 56 .............................................................22

BS 2TA 57 ...........................................................22

BS TA 57 .............................................................22

BS TA 58 .............................................................22

BS 2TA 58 ...........................................................22

BS 2TA 59 ...........................................................22

BS TA 59 .............................................................22

BS 3TA 100 .........................................................22

BS 2TA 100 .........................................................22

BS AU 50 ............................................................38

BS AU 170 ..........................................................30

BS AU 206 ..........................................................38

BS AU 233 ..........................................................38

PAS 66 ................................................................22

NA to BS EN 1993 ...............................................12

BS B 24 ...............................................................20

BS 3B 25 .............................................................20

BS 2B 25 .............................................................20

BS 3B 26 .............................................................20

BS 2B 26 .............................................................20

BS 3B 27 .............................................................20

BS 2B 27 .............................................................20

BS 3B 28 .............................................................20

BS 2B 28 .............................................................20

BS 3B 29 .............................................................20

BS 2B 29 .............................................................20

BS 3B 30 .............................................................20

BS 2B 30 .............................................................20

BS 3B 31 .............................................................20

BS 2B 31 .............................................................20

BS 2B 32 .............................................................20

BS 3B 32 .............................................................20

BS 3B 33 .............................................................20

BS 2B 33 .............................................................20

BS L 170 .............................................................31

BS 5X 17 ............................................................31

BS HC 401 ..........................................................31

BS HC 402 ..........................................................31

BS 3HR 201 ........................................................20

BS 2HR 201 ........................................................20

BS 2HR 202 ........................................................20

BS 3HR 202 ........................................................20

BS 2HR 203 ........................................................20

BS HR 203 ..........................................................20

BS 2HR 204 ........................................................20

BS HR 204 ..........................................................20

BS HR 205 ..........................................................20

BS 2HR 205 ........................................................20

BS HR 206 ..........................................................20

BS 2HR 206 ........................................................20

BS 2HR 207 ........................................................20

BS HR 207 ..........................................................20

BS HR 208 ..........................................................20

BS 2HR 208 ........................................................20

BS SP 57 and 58 .................................................31

BS 2TA 1 .............................................................20

BS 3TA 1 .............................................................20

BS 2TA 2 .............................................................21

BS 3TA 2 .............................................................21

BS 2TA 6 .............................................................21

BS 3TA 6 .............................................................21

BS 3TA 7 .............................................................21

BS 2TA 7 .............................................................21

BS 3TA 10 ...........................................................21

BS 2TA 10 ...........................................................21

BS 3TA 11 ...........................................................21

BS 2TA 11 ...........................................................21

BS 3TA 12 ...........................................................21

BS 2TA 12 ...........................................................21

BS 3TA 13 ...........................................................21

BS 2TA 13 ...........................................................21

BS 3TA 21 ...........................................................21

BS 2TA 21 ...........................................................21

BS 3TA 28 ...........................................................21

BS 2TA 28 ...........................................................21

BS 2TA 38 ...........................................................21

BS TA 38 .............................................................21

BS 2TA 39 ...........................................................21

BS ISO 15901 .....................................................38

BS ISO 16063 ...............................................18, 32

BS ISO 16212 .....................................................38

BS ISO 16750 .....................................................38

BS ISO 16792 .....................................................38

BS ISO 17560 .....................................................29

BS ISO 17832 .....................................................18

BS ISO 19072 .....................................................38

BS ISO 20282 .....................................................38

BS ISO 20341 .....................................................29

BS ISO 21849 .....................................................38

BS ISO 22089 .....................................................18

BS ISO 22179 .....................................................18

BS ISO 22472 .....................................................38

BS ISO 22514 .....................................................18

BS ISO 22915 .....................................................18

BS ISO 23874 .....................................................38

BS ISO 24097 .....................................................18

BS ISO 24497 .....................................................38

BS ISO 24631 ...............................................18, 19

BS ISO/IEC 24713 ...............................................19

BS ISO 25518 .....................................................19

BS ISO 26722 .....................................................19

BS ISO 26842 .....................................................19

BS ISO 28077 .....................................................38

BS ISO 28178 .....................................................19

BS CECC 41000 ..................................................32

DD ISO/TS 5658 ..................................................37

DD ISO/TS 11080 ................................................19

DD ISO/TS 16610 ................................................38

DD ISO/TS 21220 ................................................19

DD ISO/TS 22224 ................................................19

DD ISO/TS 24817 ................................................38

PD CEN/TR 15894 ...............................................19

PD 0006 .............................................................29

PD 0016 .............................................................29

PD 0017 .............................................................29

PD 0018 .............................................................29

PD 0023 .............................................................29

PD 0028 .............................................................29

PD 6433 .............................................................29

PD 6439 .............................................................29

PD 6461 .............................................................29

PD 6503 .............................................................29

PD 6505 .............................................................31

PD 6510 .............................................................31

PD 6631 .............................................................29

PD 6682 .............................................................19

PD 6688 .............................................................19

PD 6777 .............................................................29

PD 7500 .............................................................29

PD 7501 .............................................................29

PD 7502 .............................................................30

PD 7503 .............................................................30

PD 8010 .............................................................30

PD ISO/TR 10809 ................................................19

PD ISO/TR 16268 ................................................19

PD ISO/TR 24699 ................................................19

PD CLC/TR 50373 ...............................................29

PD CLC/TR 50422 ...............................................29

BS B 23 ...............................................................20

BS 2B 23 .............................................................20

BS 2B 24 .............................................................20


Alpha-numeric sequence of British Standards continued...

Help Us to Help

You!

Always quote your Customer Number

Don’t know your number?

Contact Customer Services

020 8996 9001

who will be happy to check it for you

BS EN ISO 927:2009Spices and condiments. Determination ofextraneous matter and foreign matter content

supersedes BS 4585-1:1983ISBN 978 0 580 57814 4£34.00 members, £68.00 non-members

AW/7

BS EN 934-3:2009Admixtures for concrete, mortar and grout.Admixtures for masonry mortar. Definitions,requirements, conformity and marking andlabelling

supersedes BS EN 934-3:2003ISBN 978 0 580 62627 2£42.00 members, £84.00 non-members

B/517/3

BS EN 937:2009Chemicals used for treatment of water intendedfor human consumption. Chlorine

supersedes BS EN 937:1999ISBN 978 0 580 58598 2£60.00 members, £120.00 non-members

CII/59

BS EN 973:2009Chemicals used for treatment of water intendedfor human consumption. Sodium chloride forregeneration of ion exchangers


CII/59

BS EN 1230-2:2009Paper and board intended to come into contactwith foodstuffs. Sensory analysis. Off-flavour(taint)


CW/47/3

BS EN ISO 1402:2009Rubber and plastics hoses and hose assemblies.Hydrostatic testing

supersedes BS EN ISO 1402:1997ISBN 978 0 580 58411 4£42.00 members, £84.00 non-members

PRI/66/-/4

BS EN 1405:2009Chemicals used for treatment of water intendedfor human consumption. Sodium alginate


CII/59

BS EN 1406:2009Chemicals used for treatment of water intendedfor human consumption. Modified starches


CII/59

BS 8468-3.2:2009Respiratory protective devices for use againstchemical, biological, radiological and nuclear(CBRN) agents. Air-purifying devicesincorporating a hood for escape. Specification

no current standard is supersededISBN 978 0 580 63993 7£69.00 members, £138.00 non-members

PH/4

NA to BS EN 1993-6:2007UK National Annex to Eurocode 3. Design ofsteel structures. Crane supporting structures


B/525/31

BS EN PUBLICATIONS

The following are British Standardimplementations of the English languageversions of European Standards (ENs).

BSI has an obligation to publish all ENsand to withdraw any conflicting BritishStandards. This has led to a series ofstandards, BS ENs, using the EN number.

Note: The date referenced in theidentifier is the date of the Europeanstandard.

BS EN ISO 287:2009Paper and board. Determination of moisturecontent of a lot. Oven-drying method


PAI/11

BS EN 455-2:2009Medical gloves for single use. Requirements andtesting for physical properties


CH/205/3

BS EN 778:2009Domestic gas-fired forced convection air heatersfor space heating not exceeding a net heatinput of 70 kW, without a fan to assisttransportation of combustion air and/orcombustion products


GSE/20

BS EN ISO 787-7:2009General methods of test for pigments andextenders. Determination of residue on sieve.Water method. Manual procedure

supersedes BS 3483-B3:1982ISBN 978 0 580 63618 9£34.00 members, £68.00 non-members

STI/1

BRITISH STANDARDS

The following British Standardpublications are available fromBSI Customer Services (see ’How to order’on page 2).

The publications listed below are newand revised British Standards that weremade available last month.

An existing BSI publication bearing anumber identical to one announcedbelow is automatically withdrawn unlessstated otherwise.

In all other cases of supersession, detailsare given and a corresponding entryappears in the ’British Standardswithdrawn’ section.

BRITISH STANDARD IMPLEMENTATIONSWILL BE SUPPLIED IN PREFERENCE TOEUROPEAN OR INTERNATIONALSTANDARDS, UNLESS OTHERWISEREQUESTED.

Please order by the British Standardreference not the ISBN number.

BS 2000 series standards are also availablefrom:–Library of the Energy Institute61 New Cavendish StreetLondon W1G 7ARTel: 020 7467 7100Fax: 020 7255 1472Email: [email protected] this series, member pricing isapplicable to BSI and Energy Institutemembers.

BS 8102:2009Code of practice for protection of belowground structures against water from theground

supersedes BS 8102:1990ISBN 978 0 580 59399 4£79.00 members, £158.00 non-members

B/526

BS 8103-3:2009Structural design of low-rise buildings. Code ofpractice for timber floors and roofs for housing


B/204/2

BS 8409:2009Fully enclosed play facilities. Code of practice


SW/65/5

British Standards


BS EN 4114:2009Aerospace series. Clamps, loop (’’P’’ type) inaluminium alloy with rubber cushioning.Dimensions, masses


ACE/69

BS EN 4234:2009Aerospace series. Clamps, worm drive.Dimensions, masses


ACE/69

BS EN ISO 7579:2009Dyestuffs. Determination of solubility in organicsolvents. Gravimetric and photometric methods


STI/1

BS EN ISO 7886-3:2009Sterile hypodermic syringes for single use. Auto-disable syringes for fixed-dose immunization

supersedes BS EN ISO 7886-3:2005ISBN 978 0 580 67785 4£60.00 members, £120.00 non-members

CH/84

BS EN ISO 7886-4:2009Sterile hypodermic syringes for single use.Syringes with re-use prevention feature


CH/84

BS EN ISO 9073-5:2008Textiles. Test methods for nonwovens.Determination of resistance to mechanicalpenetration (ball burst procedure)


TCI/24

BS EN ISO 9117-1:2009Paints and varnishes. Drying tests.Determination of through-dry state andthrough-dry time


STI/10

BS EN 10349:2009Steel castings. Austenitic manganese steelcastings


ISE/6

BS EN 3660-036:2009Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Spacer pad for cable outlet, style Z.Product standard

no current standard is superseded

ISBN 978 0 580 61330 2£34.00 members, £68.00 non-members

ACE/6

BS EN 3660-037:2009Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Bushing strip, elastomer, for cableoutlet, style Z. Product standard



ACE/6

BS EN 3730:2009Aerospace series. Clamps, saddle fixed andsliding version in aluminium alloy with rubbercushioning. Dimension, masses

supersedes BS EN 3730:2001


ACE/6

BS EN ISO 3907:2009Hardmetals. Determination of total carbon.Gravimetric method



ISE/65

BS EN 3987:2009Aerospace series. Test methods for metallicmaterials. Constant amplitude force-controlledhigh cycle fatigue testing



ACE/61/-/6

BS EN ISO 4049:2009Dentistry. Polymer-based restorative materials

supersedes BS EN ISO 4049:2000


CH/106/1

BS EN 4113:2009Aerospace series. Clamps, loop (“P” type) incorrosion resisting steel, passivated, with rubbercushioning. Dimensions, masses



ACE/69

BS EN 1639:2009Dentistry. Medical devices for dentistry.Instruments


CH/106/4

BS EN 1640:2009Dentistry. Medical devices for dentistry.Equipment


CH/106/4

BS EN 1641:2009Dentistry. Medical devices for dentistry.Materials


CH/106/2

BS EN 1642:2009Dentistry. Medical devices for dentistry. Dentalimplants


CH/106/8

BS EN ISO 1890:2009Reinforcement yarns. Determination of twist


PRI/42

BS EN 2240-001:2009Aerospace series. Lamps, incandescent.Technical specification


ACE/6

BS EN ISO 2740:2009Sintered metal materials, excluding hardmetals.Tensile test pieces


ISE/65

BS EN 3464:2009Aerospace series. Titanium alloy TI-P64001 (Ti-6AI-4V). Annealed. Plate. 6 mm < a ≤ 100 m


ACE/61/-/49

BS EN Publications continued...


BS EN ISO 15011-3:2009Health and safety in welding and alliedprocesses. Laboratory method for samplingfume and gases. Determination of ozoneemission rate during arc welding

supersedes BS EN ISO 15011-3:2002 which waswithdrawn in 2005ISBN 978 0 580 55640 1£60.00 members, £120.00 non-members

WEE/40

BS EN ISO 15156-1:2009Petroleum and natural gas industries. Materialsfor use in H2S-containing environments in oiland gas production. General principles forselection of cracking-resistant materials


PSE/17/-/7

BS EN ISO 15156-2:2009Petroleum and natural gas industries. Materialsfor use in H2S-containing environments in oiland gas production. Cracking-resistant carbonand low-alloy steels, and the use of cast irons


PSE/17/-/7

BS EN ISO 15156-3:2009Petroleum and natural gas industries. Materialsfor use in H2S-containing environments in oiland gas production. Cracking-resistant CRAs(corrosion-resistant alloys) and other alloys


PSE/17/-/7

BS EN 15269-7:2009Extended application of test results for fireresistance and/or smoke control for door,shutter and openable window assemblies,including their elements of building hardware.Fire resistance for steel sliding doorsets


FSH/22/5

BS EN 15503:2009Garden equipment. Garden blowers, vacuumsand blower/vacuums. Safety


AGE/20

BS EN ISO 13479:2009Polyolefin pipes for the conveyance of fluids.Determination of resistance to crackpropagation. Test method for slow crackgrowth on notched pipes

supersedes the dual numbered standardBS EN ISO 13479:1997, BS 2782-11:Method1109N:1997ISBN 978 0 580 63079 8£42.00 members, £84.00 non-members

PRI/88/4

BS EN 13523-27:2009Coil coated metals. Test methods. Resistance tohumid poultice (Cataplasm test)


STI/27

BS EN 14232:2009Advanced technical ceramics. Terms, definitionsand abbreviations

supersedes DD ENV 14232:2003ISBN 978 0 580 63842 8£90.00 members, £180.00 non-members

RPI/13

BS EN ISO 14607:2009Non-active surgical implants. Mammaryimplants. Particular requirements


CH/150

BS EN ISO 14630:2009Non-active surgical implants. Generalrequirements


CH/150

BS EN ISO 15011-1:2009Health and safety in welding and alliedprocesses. Laboratory method for samplingfume and gases. Determination of fumeemission rate during arc welding and collectionof fume for analysis


WEE/40

BS EN ISO 15011-2:2009Health and safety in welding and alliedprocesses. Laboratory method for samplingfume and gases. Determination of the emissionrates of carbon monoxide (CO), carbon dioxide(CO2), nitrogen monoxide (NO) and nitrogendioxide (NO2) during arc welding, cutting andgouging


WEE/40

BS EN ISO 11138-2:2009Sterilization of health care products. Biologicalindicators. Biological indicators for ethyleneoxide sterilization processes


LBI/35

BS EN ISO 11138-3:2009Sterilization of health care products. Biologicalindicators. Biological indicators for moist heatsterilization processes


LBI/35

BS EN ISO 11140-1:2009Sterilization of health care products. Chemicalindicators. General requirements


LBI/35

BS EN ISO 11357-1:2009Plastics. Differential scanning calorimetry (DSC).General principles


PRI/21

BS EN ISO 11810-1:2009Lasers and laser-related equipment. Testmethod and classification for the laserresistance of surgical drapes and/or patientprotective covers. Primary ignition andpenetration


CPW/172/9

BS EN ISO 11810-2:2009Lasers and laser-related equipment. Testmethod and classification for the laser-resistance of surgical drapes and/or patient-protective covers. Secondary ignition


CPW/172/9

BS EN ISO 11980:2009Ophthalmic optics. Contact lenses and contactlens care products. Guidance for clinicalinvestigations


CH/172/9


To order visit

www.bsigroup.com/shop

BS EN ISO 28199-2:2009Paints and varnishes. Evaluation of properties ofcoating systems related to the applicationprocess. Colour stability, process hiding power,re-dissolving, overspray absorption, wetting,surface texture and mottling


STI/10

BS EN ISO 28199-3:2009Paints and varnishes. Evaluation of properties ofcoating systems related to the applicationprocess. Visual assessment of sagging,formation of bubbles, pinholing and hidingpower


STI/10

BS ENs IMPLEMENTED BYAMENDMENT

For the standards listed below see alsothe ’Amendments to British Standards’and ’Updated British Standards’ sectionsof this issue of Update Standards.

BS EN ISO/IEC 19796-1:2009Information technology. Learning, educationand training. Quality management, assuranceand metrics. General approach

IST/43

Implementation of European Standard EN ISO/IEC19796-1 by amendment to BS ISO/IEC 19796-1:2005

BS IMPLEMENTATIONS

BS Implementations comprise the ISO orIEC text without any national deviationand with front and back cover indicatingthe UK committee responsible.No other information will normally beadded.

Note: The date referenced in theidentifier is the date of the internationalstandard.

BS ISO 1920-8:2009Testing of concrete. Determination of thedrying shrinkage of concrete for samplesprepared in the field or in the laboratory


B/517/1

BS ISO 1920-9:2009Testing of concrete. Determination of creep ofconcrete cylinders in compression


B/517/1

BS EN ISO 15927-3:2009Hygrothermal performance of buildings.Calculation and presentation of climatic data.Calculation of a driving rain index for verticalsurfaces from hourly wind and rain data


B/540/8

BS EN ISO 16773-3:2009Paints and varnishes. Electrochemicalimpedance spectroscopy (EIS) on high-impedance coated specimens. Processing andanalysis of data from dummy cells


STI/10

BS EN ISO 16773-4:2009Paints and varnishes. Electrochemicalimpedance spectroscopy (EIS) on high-impedance coated specimens. Examples ofspectra of polymer-coated specimens


STI/10

BS EN ISO 21649:2009Needle-free injectors for medical use.Requirements and test methods


CH/84

BS EN ISO 24978:2009Intelligent transport systems. ITS Safety andemergency messages using any availablewireless media. Data registry procedures


EPL/278

BS EN ISO 28139:2009Agricultural and forestry machinery. Knapsackcombustion engine-driven mistblowers. Safetyrequirements


AGE/15

BS EN ISO 28199-1:2009Paints and varnishes. Evaluation of properties ofcoating systems related to the applicationprocess. Relevant vocabulary and preparation oftest panels


STI/10

BS EN 15657-1:2009Acoustic properties of building elements and ofbuildings. Laboratory measurement of airborneand structure borne sound from buildingequipment. Simplified cases where theequipment mobilities are much higher than thereceiver mobilities, taking whirlpool baths as anexample


EH/1/6

BS EN 15714-1:2009Industrial valves. Actuators. Terminology anddefinitions


PSE/18/5

BS EN 15714-2:2009Industrial valves. Actuators. Electric actuatorsfor industrial valves. Basic requirements


PSE/18/5

BS EN 15714-3:2009Industrial valves. Actuators. Pneumatic part-turnactuators for industrial valves. Basicrequirements


PSE/18/5

BS EN 15714-4:2009Industrial valves. Actuators. Hydraulic part-turnactuators for industrial valves. Basicrequirements


PSE/18/5

BS EN 15749:2009Fertilizers. Determination of sulfates contentusing three different methods

supersedes DD CEN/TS 15749:2008ISBN 978 0 580 66425 0£60.00 members, £120.00 non-members

CII/37

BS EN 15779:2009(BS 2000-578:2009)Petroleum products and fat and oil derivates.Fatty acid methyl esters (FAME) for dieselengines. Determination of polyunsaturated (≥ 4 double bonds) fatty acid methyl esters(PUFA) by gas chromatography


PTI/13

Available from the Institute of Petroleum, see the’British Standards’ section foreword for orderinginformation

BS EN Publications continued...


BS ISO 10596:2009Ships and marine technology. Marine wind vaneand anemometers


EPL/80

BS ISO 10643:2009Dimensions of accessories for cutting tools andtheir attachments


MTE/18

BS ISO 10770-1:2009Hydraulic fluid power. Electrically modulatedhydraulic control valves. Test methods for four-port directional flow-control valves

supersedes BS ISO 10770-1:1998ISBN 978 0 580 60277 1£69.00 members, £138.00 non-members

MCE/18/-/8

BS ISO 10816-2:2009Mechanical vibration. Evaluation of machinevibration by measurements on non-rotatingparts. Land-based steam turbines andgenerators in excess of 50 MW with normaloperating speeds of 1500 r/min, 1800 r/min,3000 r/min and 3600 r/min


GME/21/5

BS ISO 10816-4:2009Mechanical vibration. Evaluation of machinevibration by measurements on non-rotatingparts. Gas turbine sets with fluid-film bearings


GME/21/5

BS ISO 10975:2009Tractors and machinery for agriculture. Auto-guidance systems for operator-controlledtractors and self-propelled machines. Safetyrequirements


AGE/6

BS ISO 11012:2009Heavy commercial vehicles and buses. Open-loop test methods for the quantification of on-centre handling. Weave test and transition test


AUE/15

BS ISO 7199:2009Cardiovascular implants and artificial organs.Blood-gas exchangers (oxygenators)



CH/150/2

BS ISO 7404-2:2009Methods for the petrographic analysis of coals.Methods of preparing coal samples

supersedes BS 6127-2:1982


PTI/16

BS ISO 7404-3:2009Methods for the petrographic analysis of coals.Method of determining maceral groupcomposition



PTI/16

BS ISO 7404-5:2009Methods for the petrographic analysis of coals.Method of determining microscopically thereflectance of vitrinite



PTI/16

BS ISO 7919-2:2009Mechanical vibration. Evaluation of machinevibration by measurements on rotating shafts.Land-based steam turbines and generators inexcess of 50 MW with normal operating speedsof 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min

supersedes BS ISO 7919-2:2001


GME/21/5

BS ISO 7919-4:2009Mechanical vibration. Evaluation of machinevibration by measurements on rotating shafts.Gas turbine sets with fluid-film bearings

supersedes BS ISO 7919-4:1996


GME/21/5

BS ISO 8407:2009Corrosion of metals and alloys. Removal ofcorrosion products from corrosion testspecimens

supersedes BS 7545:1991


ISE/NFE/8

BS ISO 2041:2009Mechanical vibration, shock and conditionmonitoring. Vocabulary


GME/21/1

BS ISO 2470-1:2009Paper, board and pulps. Measurement of diffuseblue reflectance factor. Indoor daylightconditions (ISO brightness)

supersedes BS ISO 2470:1999ISBN 978 0 580 55161 1£42.00 members, £84.00 non-members

PAI/11

BS ISO 2470-2:2008Paper, board and pulps. Measurement of diffuseblue reflectance factor. Outdoor daylightconditions (D65 brightness)


PAI/11

BS ISO 2471:2008Paper and board. Determination of opacity(paper backing). Diffuse reflectance method


PAI/11

BS ISO 2834-3:2008Graphic technology. Laboratory preparation oftest prints. Screen printing inks


PAI/43

BS ISO 4229:2009Assembly tools for screws and nuts. Single-headengineer’s wrenches for lower torqueapplications. Maximum outside dimensions ofheads and test torques


MTE/15

BS ISO 4395:2009Fluid power systems and components. Cylinderpiston rod end types and dimensions


MCE/18/-/3

BS ISO 6145-5:2009Gas analysis. Preparation of calibration gasmixtures using dynamic volumetric methods.Capillary calibration devices


PTI/15


BS ISO 22179:2009Intelligent transport systems. Full speed rangeadaptive cruise control (FSRA) systems.Performance requirements and test procedures


EPL/278

BS ISO 22514-1:2009Statistical methods in process management.Capability and performance. General principlesand concepts


SS/4

BS ISO 22915-7:2009Industrial trucks. Verification of stability.Bidirectional and multidirectional trucks


MHE/7

BS ISO 22915-21:2009Industrial trucks. Verification of stability. Order-picking trucks with operator position elevatingabove 1200mm


MHE/7

BS ISO 24097-1:2009Intelligent transport systems. Using web services(machine-machine delivery) for ITS servicedelivery. Realization of interoperable webservices


EPL/278

BS ISO 24631-1:2009Radiofrequency identification of animals.Evaluation of conformance of RFIDtransponders with ISO 11784 and ISO 11785(including granting and use of a manufacturercode)


AGE/6/1

BS ISO 24631-2:2009Radiofrequency identification of animals.Evaluation of conformance of RFID transceiverswith ISO 11784 and ISO 11785


AGE/6/1

BS ISO 15394:2009Packaging. Bar code and two-dimensionalsymbols for shipping, transport and receivinglabels

supersedes BS ISO 15394:2000


PKW/0

BS ISO 15511:2009Information and documentation. Internationalstandard identifier for libraries and relatedorganizations (ISIL)



IDT/2/7

BS ISO 15674:2009Cardiovascular implants and artificial organs.Hard-shell cardiotomy/venous reservoir systems(with/without filter) and soft venous reservoirbags



CH/150/2

BS ISO 15675:2009Cardiovascular implants and artificial organs.Cardiopulmonary bypass systems. Arterial bloodline filters



CH/150/2

BS ISO 16063-31:2009Methods for the calibration of vibration andshock transducers. Testing of transversevibration sensitivity



GME/21/2

BS ISO 17832:2009Non-parallel steel wire and cords for tyrereinforcement



ISE/71

BS ISO 22089:2009Aerospace. Hydraulic power transfer units.General specifications



ACE/69

BS ISO 11663:2009Quality of dialysis fluid for haemodialysis andrelated therapies


CH/150/2

BS ISO/IEC 11693-2:2009Identification cards. Optical memory cards. Co-existence of optical memory with othermachine readable technology


IST/17

BS ISO 12635:2008Graphic technology. Plates for offset printing.Dimensions


PAI/43

BS ISO 13959:2009Water for haemodialysis and related therapies


CH/150/2

BS ISO 14242-3:2009Implants for surgery. Wear of total hip-jointprostheses. Loading and displacementparameters for orbital bearing type weartesting machines and correspondingenvironmental conditions for test


CH/150/4

BS ISO 14401-1:2009Earth-moving machinery. Field of vision ofsurveillance and rear-view mirrors. Test methods


B/513/1

BS ISO 14401-2:2009Earth-moving machinery. Field of vision ofsurveillance and rear-view mirrors. Performancecriteria


B/513/1

BS ISO 14813-6:2009Intelligent transport systems. Reference modelarchitecture(s) for the ITS sector. Datapresentation in ASN.1


EPL/278

BS Implementations continued...


PD ISO/TR 16268:2009Surface chemical analysis. Proposed procedurefor certifying the retained areic dose in aworking reference material produced by ionimplantation


CII/60

PD ISO/TR 24699:2009Rubber and rubber products. Environmentalaspects. General guidelines for their inclusion instandards


PRI/90

DRAFTS FOR DEVELOPMENT

DD ISO/TS 11080:2009Dentistry. Essential characteristics of testmethods for the evaluation of treatmentmethods intended to improve or maintain themicrobiological quality of dental unitprocedural water


CH/106/4

DD CEN/TS 14940-1:2009Copper and copper alloys. Determination ofchromium content. Titrimetric method


NFE/34

DD CEN/TS 15606:2009Foodstuffs. Determination of acesulfame-K,aspartame, neohesperidine-dihydrochalconeand saccharin. High performance liquidchromatographic method


AW/-/3

DD ISO/TS 21220:2009Particulate air filters for general ventilation.Determination of filtration performance


MCE/21

DD ISO/TS 22224:2009Health informatics. Electronic reporting ofadverse drug reactions


IST/35

BS ISO 28178:2009Graphic technology. Exchange format for colourand process control data using XML or ASCIItext


PAI/43

BS ISOs IMPLEMENTED BYAMENDMENT

For the standards listed below see alsothe ’Amendment to British Standards’ and’Updated British Standards’ sections ofthis issue of Update Standards.

BS ISO 8178-6:2000Reciprocating internal combustion engines.Exhaust emission measurement. Report ofmeasuring results and testImplementation of International Standard ISO 8178-6 by amendment to BS EN ISO 8178-6:2001

PUBLISHED DOCUMENTS

PD 6682-1:2009Aggregates. Aggregates for concrete. Guidanceon the use of BS EN 12620

supersedes PD 6682-1:2003ISBN 978 0 580 65306 3£69.00 members, £138.00 non-members

B/502

PD 6682-6:2009Aggregates. Aggregates for unbound andhydraulically bound materials for use in civilengineering works and road construction.Guidance on the use of BS EN 13242

supersedes PD 6682-6:2003ISBN 978 0 580 65330 8£69.00 members, £138.00 non-members

B/502

PD 6688-1-4:2009Background information to the National Annexto BS EN 1991-1-4 and additional guidance


B/525/1

PD ISO/TR 10809-1:2009Cast irons. Materials and properties for design


ISE/35

PD CEN/TR 15894:2009Building hardware. Door fittings for use bychildren, elderly and disabled people indomestic and public buildings. A guide forspecifiers


B/538/4

BS ISO 24631-3:2009Radiofrequency identification of animals.Evaluation of performance of RFIDtransponders conforming with ISO 11784 andISO 11785


AGE/6/1

BS ISO 24631-4:2009Radiofrequency identification of animals.Evaluation of performance of RFID transceiversconforming with ISO 11784 and ISO 11785


AGE/6/1

BS ISO/IEC 24713-3:2009Information technology. Biometric profiles forinteroperability and data interchange.Biometrics-based verification and identificationof seafarers


IST/44

BS ISO 25518:2009Single-use rubber gloves for generalapplications. Specification


CH/205/3

BS ISO 26722:2009Water treatment equipment for haemodialysisapplications and related therapies


CH/150/2

BS ISO 26842-1:2009Adhesives. Test methods for the evaluation andselection of adhesives for indoor woodproducts. Resistance to delamination in non-severe environments


PRI/52

BS ISO 26842-2:2009Adhesives. Test methods for the evaluation andselection of adhesives for indoor woodproducts. Resistance to delamination in severeenvironments


PRI/52


BS 2HR 203:2009Specification for nickel-chromium-titaniumheat-resisting alloy plate, sheet and strip (nickelbase, Cr 19.5, Ti 0.4)

supersedes BS HR 203:1972ISBN 978 0 580 67307 8£34.00 members, £68.00 non-members

ACE/61

BS 2HR 204:2009Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resistingalloy plate, sheet and strip (nickel base, Cr 21.7,Fe 18.5, Mo9, Co 1.5, W 0.6)


ACE/61

BS 2HR 205:2009Specification for nickel-copper alloy sheet andstrip: annealed (nickel base, Cu 31)


ACE/61

BS 2HR 206:2009Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resistingalloy plate, sheet and strip (nickel base, Co 20,Cr 20, Mo 5.9, Ti 2.1, Al 0.5)


ACE/61

BS 2HR 207:2009Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resistingalloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5,Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)


ACE/61

BS 2HR 208:2009Specification for nickel-chromium-iron alloyplate, sheet and strip: annealed (nickel base, Cr 15.5, Fe 8)


ACE/61

BS 3TA 1:2009Specification for sheet and strip of commerciallypure titanium (tensile strength 290-420 MPa)

supersedes BS 2TA 1:1974ISBN 978 0 580 65381 0£34.00 members, £68.00 non-members

ACE/61/-/49

BS 3B 29:2009Specification for copper-beryllium alloy stripand foil (solution treated, cold rolled: quarterhard and precipitation treated)

supersedes BS 2B 29:2001ISBN 978 0 580 62844 3£34.00 members, £68.00 non-members

ACE/61

BS 3B 30:2009Specification for copper-beryllium alloy stripand foil (solution treated, cold rolled: half hardand precipitation treated)


ACE/61

BS 3B 31:2009Specification for copper-beryllium alloy stripand foil (solution treated, cold rolled: full hardand precipitation treated)


ACE/61

BS 3B 32:2009Specification for copper-beryllium alloy rods,bars and sections (solution treated andprecipitation treated)


ACE/61

BS 3B 33:2009Specification for copper-beryllium alloy wire(solution treated and precipitation treated)


ACE/61

BS 3HR 201:2009Specification for nickel-chromium-titanium-aluminium heat-resisting alloy plate, sheet andstrip (nickel base, Cr 19.5, Ti 2.2, Al 1.4)

supersedes BS 2HR 201:1974ISBN 978 0 580 67305 4£34.00 members, £68.00 non-members

ACE/61

BS 3HR 202:2009Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheetand strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)

supersedes BS 2HR 202:1973ISBN 978 0 580 67306 1£34.00 members, £68.00 non-members

ACE/61

AEROSPACE SERIES

BS 2B 23:2009Specification for copper-aluminium-nickel-ironalloy rods, bars, sections, forging stock andforgings

supersedes BS B 23:1991ISBN 978 0 580 62838 2£34.00 members, £68.00 non-members

ACE/61

BS 2B 24:2009Specification for copper-tin-phosphorous alloyrods and sections

supersedes BS B 24:1991ISBN 978 0 580 62839 9£34.00 members, £68.00 non-members

ACE/61

BS 3B 25:2009Specification for copper-nickel-silicon alloy rods,bars, sections, forging stock and forgings (heattreated)


ACE/61

BS 3B 26:2009Specification for copper-nickel-silicon alloy rods,bars and sections (solution treated, cold workedand precipitation treated)


ACE/61

BS 3B 27:2009Specification for copper-zinc-aluminium-nickel-silicon alloy tube


ACE/61

BS 3B 28:2009Specification for copper-beryllium alloy stripand foil (solution treated and precipitationtreated)


ACE/61

Aerospace Series


Please

do not send

confirmation

of

orders placed by

telephone

as it can lead to

duplication

BS 2TA 46:2009Specification for bar and section for machiningof titanium-aluminium-molybdenum-tin-siliconalloy (tensile strength 1050-1220 MPa) (limitingruling section over 25 mm up to and including100 mm)

supersedes BS TA 46:1973ISBN 978 0 580 65369 8£34.00 members, £68.00 non-members

ACE/61/-/49

BS 2TA 47:2009Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensilestrength 1050-1220 MPa) (limiting ruling section100 mm)


ACE/61/-/49

BS 2TA 48:2009Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1050-1200 MPa) (limitingruling section 100 mm)


ACE/61

BS 2TA 49:2009Specification for bar and section for machiningof titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1000-1200 MPa)(limiting ruling section over 100 mm up to andincluding 150 mm)


ACE/61

BS 2TA 50:2009Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensilestrength 1000-1200 MPa) (limiting ruling sectionover 100 mm up to and including 150 mm)


ACE/61

BS 2TA 51:2009Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensilestrength 1000-1200 MPa) (limiting ruling sectionover 100 mm up to and including 150 mm)


ACE/61

BS 2TA 52:2009Specification for sheet and strip of titanium-copper alloy (tensile strength 690-920 MPa)


ACE/61

BS 3TA 28:2009Specification for forging stock and wire oftitanium-aluminium-vanadium alloy (tensilestrength 1100-1300 MPa) (limiting ruling section20 mm)


ACE/61/-/49

BS 2TA 38:2009Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1250-1420 MPa) (limitingruling section 25 mm)


ACE/61/-/49

BS 2TA 39:2009Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1250-1420 MPa) (limitingruling section 25 mm)


ACE/61/-/49

BS 2TA 40:2009Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1205-1375 MPa) (limitingruling section over 25 mm up to and including75 mm)


ACE/61/-/49

BS 2TA 41:2009Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1205-1375 MPa) (limitingruling section over 25 mm up to and including75 mm)


ACE/61/-/49

BS 2TA 42:2009Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1205-1375 MPa) (limitingruling section over 25 mm up to and including75 mm)


ACE/61/-/49

BS 2TA 45:2009Specification for bar and section for machiningof titanium-aluminium-molybdenum-tin-siliconalloy (tensile strength 1100-1280 MPa) (limitingruling section 25 mm)


ACE/61/-/49



ACE/61/-/49



ACE/61/-/49

BS 3TA 7:2009Specification for bar and section for machiningof commercially pure titanium (tensile strength540-740 MPa)


ACE/61/-/49

BS 3TA 10:2009Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)


ACE/61/-/49

BS 3TA 11:2009Specification for bar and section for machiningof titanium-aluminium-vanadium alloy (tensilestrength 900-1160 MPa) (limiting ruling section150 mm)


ACE/61/-/49

BS 3TA 12:2009Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength900-1160 MPa) (limiting ruling section 150 mm)


ACE/61/-/49

BS 3TA 13:2009Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength900-1160 MPa) (limiting ruling section 150 mm)


ACE/61/-/49

BS 3TA 21:2009Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa)


ACE/61/-/49


BS EN 60384-3:2006Fixed capacitors for use in electronicequipment. Sectional specification: Surfacemount fixed tantalum electrolytic capacitorswith manganese dioxide solid electrolyte

CORRIGENDUM 1

EPL/40X

BS EN 60393-1:2009Potentiometers for use in electronic equipment.Generic specification

CORRIGENDUM 1

EPL/40X

BS EN 60896-22:2004Stationary lead-acid batteries. Valve regulatedtypes. Requirements

CORRIGENDUM 1

PEL/21

BS EN 60950-1:2001Information technology equipment. Safety.General requirements

CORRIGENDUM 2

EPL/108

Also incorporates Corrigenda 1 and Amendment 11

BS ISO 8178-6:2000Reciprocating internal combustion engines.Exhaust emission measurement. Report ofmeasuring results and test

CORRIGENDUM 2

MCE/14/-/3

UPDATED BRITISHSTANDARDS

The following standards have beenamended and the amendments havebeen incorporated into an updatedstandard.

NOTE: Updated British Standardsmust be reordered as theamendments are not availableseparately.

BS EN 609-1:1999+A2:2009Agricultural and forestry machinery. Safety oflog splitters. Wedge splitters

AMENDMENT 2£42.00 members, £84.00 non-members

AGE/29

Also incorporates Amendment 1

BS EN 609-2:1999+A1:2009Agricultural and forestry machinery. Safety oflog splitters. Screw splitters


AGE/29

BS EN 794-3:1998+A2:2009Lung ventilators. Particular requirements foremergency and transport ventilators


CH/121/5


CORRIGENDA TO BRITISHSTANDARDS

Most amendments are not issuedseparately. Those that make significantchanges to a standard are incorporatedinto the standard which is reissued (see‘Updated British Standards’). BritishStandards which have been corrected viacorrigenda are available on request, freeof charge to past purchasers of thestandard. All amendments and corrigendato date of despatch are included withinany main publication when ordered forthe first time.

The following corrigenda to BritishStandards were made available lastmonth.

BS 460:2002+A2:2007Cast iron rainwater goods. Specification

CORRIGENDUM 2

PSE/10

Also incorporates Corrigenda 1 and Amendments 1& 2

BS 870:2008Specification for external micrometers

CORRIGENDUM 2

TDW/4

Also incorporates Corrigenda 1

BS 5422:2009Method for specifying thermal insulatingmaterials for pipes, tanks, vessels, ductwork andequipment operating within the temperaturerange -40ºC to +700ºC

CORRIGENDUM 1

B/540/7

BS EN 2955:1993Aerospace series. Recycling of titanium andtitanium alloy scrap

CORRIGENDUM 1

ACE/61/-/49

BS EN 10269:1999+A1:2006Steels and nickel alloys for fasteners withspecified elevated and/or low temperatureproperties

CORRIGENDUM 4

ISE/73/2

Also incorporates Corrigenda 1, 2 & 3 andAmendment 1

BS EN ISO/IEC 19796-1:2009Information technology. Learning, educationand training. Quality management, assuranceand metrics. General approach

CORRIGENDUM 1

IST/43

BS 2TA 56:2009Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa)(maximum thickness 100 mm)


ACE/61

BS 2TA 57:2009Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength1030-1220 MPa) (thickness over 50 mm up toand including 65 mm)

supersedes BS TA 57:1974 which remains currentISBN 978 0 580 65463 3£34.00 members, £68.00 non-members

ACE/61

BS 2TA 58:2009Specification for plate of titanium-copper alloy(tensile strength 520-640 MPa) (maximumthickness 10 mm)


ACE/61

BS 2TA 59:2009Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 920-1180 MPa)


ACE/61

BS 3TA 100:2009Procedure for inspection, testing andacceptance of wrought titanium and titaniumalloys


ACE/61/-/49

PUBLICLY AVAILABLESPECIFICATIONS

Publicly Available Specifications (formerlyProduct Assessment Specifications) areissued to provide an interim documentwhere there is a market need but wherea full British or European Standard hasyet to be published.

PAS 66:2009Official identification eartags for sheep andgoats. Specification

supersedes PAS 66:2005ISBN 978 0 580 67304 7£50.00 members, £50.00 non-members

Aerospace Series continued...


BS EN 13501-2:2007+A1:2009Fire classification of construction products andbuilding elements. Classification using datafrom fire resistance tests, excluding ventilationservices


FSH/22

BS EN 13501-3:2005+A1:2009Fire classification of construction products andbuilding elements. Classification using datafrom fire resistance tests on products andelements used in building service installations:fire resisting ducts and fire dampers


FSH/22

BS EN 13501-4:2007+A1:2009Fire classification of construction products andbuilding elements. Classification using datafrom fire resistance tests on components ofsmoke control systems


FSH/22

BS EN 13501-5:2005+A1:2009Fire classification of construction products andbuilding elements. Classification using datafrom external fire exposure to roofs tests


FSH/22


BS EN 14180:2003+A2:2009Sterilizers for medical purposes. Lowtemperature steam and formaldehydesterilizers. Requirements and testing


LBI/35


BS EN 15376:2007+A1:2009Automotive fuels. Ethanol as a blendingcomponent for petrol. Requirements and testmethods


PTI/2

BS EN 60059:1999+A1:2009IEC standard current ratings


GEL/8

BS EN 60598-1:2008Luminaires. General requirements and tests


CPL/34/4

BS EN ISO 9902-1:2001+A1:2009Textile machinery. Noise test code. Commonrequirements


TCI/33

BS EN ISO 9902-2:2001+A1:2009Textile machinery. Noise test code. Spinningpreparatory and spinning machinery


TCI/33

BS EN ISO 9902-3:2001+A1:2009Textile machinery. Noise test code. Nonwovenmachinery


TCI/33

BS EN ISO 9902-5:2001+A1:2009Textile machinery. Noise test code. Weaving andknitting preparatory machinery


TCI/33

BS EN ISO 9902-6:2001+A1:2009Textile machinery. Noise test code. Fabricmanufacturing machinery


TCI/33

BS EN ISO 11111-2:2005+A1:2009Textile machinery. Safety requirements.Spinning preparatory and spinning machines


TCI/33

BS EN 12779:2004+A1:2009Safety of woodworking machines. Chip anddust extraction systems with fixed installation.Safety related performances and safetyrequirements


MTE/23

BS EN 13060:2004+A1:2009Small steam sterilizers


LBI/35


BS EN 13501-1:2007+A1:2009Fire classification of construction products andbuilding elements. Classification using test datafrom reaction to fire tests


FSH/21

BS EN 1218-5:2004+A1:2009Safety of woodworking machines. Tenoningmachines. One side profiling machines withfixed table and feed rollers or fed by chain


MTE/23


BS EN 1422:1997+A1:2009Sterilizers for medical purposes. Ethylene oxidesterilizers. Requirements and test methods


LBI/35


BS EN 1807:1999+A1:2009Safety of woodworking machines. Band sawingmachines


MTE/23

BS EN 1870-8:2001+A1:2009Safety of woodworking machines. Circularsawing machines. Single blade edging circularrip sawing machines with power driven sawunit and manual loading and/or unloading


MTE/23

BS EN 1870-9:2000+A1:2009Safety of woodworking machines. Circularsawing machines. Double blade circular sawingmachines for cross-cutting with integrated feedand with manual loading and/or unloading


MTE/23

BS EN 1870-10:2003+A1:2009Safety of woodworking machines. Circularsawing machines. Single blade automatic andsemi-automatic up-cutting cross-cut sawingmachines


MTE/23

BS EN 1870-11:2003+A1:2009Safety of woodworking machines. Circularsawing machines. Semi-automatic andautomatic horizontal cross-cut sawing machineswith one saw unit (radial arm saws)


MTE/23


BS EN 1889-2:2003+A1:2009Machines for underground mines. Mobilemachines working Underground. Safety. Raillocomotives


MRE/1


BS 131-7:1998Notched bar tests. Specification for verificationof the test machine used for precisiondetermination of Charpy V-notch impactenergies for metals

ISE/NFE/4/4

BS 350:2004Conversion factors for units

SS/7

BS 493:1995Specification for airbricks and gratings for wallventilation

B/519/1

BS 567:1973Specification for asbestos-cement flue pipes andfittings, light quality

B/506

BS 598-112:2004Sampling and examination of bituminousmixtures for roads and other paved areas.Method for the use of road surface hardnessprobe

B/510/2

BS 822-6:2004Terminal markings for electrical machinery andapparatus. Lead colours for rotating electricalmachinery

PEL/2

BS 835:1973Specification for asbestos-cement flue pipes andfittings, heavy quality

B/506

BS 842:1965Specification for A.C. voltage-operated earth-leakage circuit breakers

PEL/23

BS 1054:1975Specification for engineers’ comparators forexternal measurement

TDW/4

BS 1127-2:1990Screwing dies and dienuts. Specification forhand- and machine-operated circular screwingdies for taper pipe threads. R series

MTE/18

BS 1347:1986Specification for architects’, engineers’ andsurveyors’ metric scale rules

TDW/4

BS 1377-1:1990Methods of test for soils for civil engineeringpurposes. General requirements and samplepreparation

B/526/3

BRITISH STANDARDSPROPOSED FORCONFIRMATION

It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.

Circumstances may lead to an earlierreview.

Confirmation indicates the continuingcurrency of a standard.

A note of any objections to the proposalsbelow should be sent to Debbie Stead,Head of Committee Service Centre –Operations, BSI Head Office, 389 ChiswickHigh Road, London W4 4AL or via emailto [email protected] 28 February, 2010.

BS 4999-103:2004General requirements for rotating electricalmachines. Specification for symbols

PEL/2

BRITISH STANDARDSREVIEWED ANDCONFIRMED

It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.

Confirmation indicates the continuingcurrency of a standard.

Where any standard in this list has beenamended since publication, confirmationincludes all amendments published todate. Reference to a particularamendment indicates that it is publishedconcurrently with the confirmation.

BS 41:1973Specification for cast iron spigot and socket flueor smoke pipes and fittings

B/506

BS 65:1991Specification for vitrified clay pipes, fittings andducts, also flexible mechanical joints for usesolely with surface water pipes and fittings

B/505

BS 131-6:1998Notched bar tests. Method for precisiondetermination of Charpy V-notch impactenergies for metals

ISE/NFE/4/4

SPECIAL ANNOUNCEMENTS

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

New International Work on DistributedApplications Platforms and Services (DAPS)

ISO/IEC JTC 1 members recently voted toestablish a new subcommittee, JTC 1/SC 38 toaddress standardization for interoperableDistributed Application Platforms and services.Within SC 38 there will be specific groupsaddressing:

Web Services, Service Oriented Architecture(SOAs) and Cloud Computing.

BSI are considering setting up a UK-centredgroup of experts to mirror the work of ISO/IECJTC 1/SC 38, and would like to hear fromrelevant trade associations, and any other keystakeholder bodies, who would like tonominate members to participate in this work. For further information and to registeryour interest in this activity, please contact the Programme Manager (below) by 31 January, 2010.Contact: Jean StrideEmail: [email protected]

ICT/-/1

BS 5950-1:2001Structural use of steelwork in building. Code ofpractice for design. Rolled and welded sections

BS 5950-4:1994Structural use of steelwork in building. Code ofpractice for design of composite slabs withprofiled steel sheeting

BS 5950-6:1995Structural use of steelwork in building. Code ofpractice for design of light gauge profiled steelsheeting

BS 5950-8:2003Structural use of steelwork in building. Code ofpractice for fire resistant design

BS 5950-9:1994Structural use of steelwork in building. Code ofpractice for stressed skin design

These documents have been reviewed andconfirmed without change by theUK committee B/525/31. These documents aresuperseded by the Eurocodes EN 1993 and aredue to be withdrawn in March 2010 when theEurocodes will be fully implemented.Contact: Clare PriceEmail: [email protected]

B/525/31

Special Announcements


BS 2000-50:1993Methods of test for petroleum and its products.Determination of cone penetration oflubricating grease

PTI/13

BS 2000-61:1999Methods of test for petroleum and its products.Determination of sulfur. High pressurecombustion method

PTI/13

BS 2000-76:1993Methods of test for petroleum and its products.Determination of congealing point of waxesand petrolatum

PTI/13

BS 2000-107:1993Methods of test for petroleum and its products.Determination of sulfur. Lamp combustionmethod

PTI/13

BS 2000-133:1993Methods of test for petroleum and its products.Determination of drop melting point of waxand petrolatum

PTI/13

BS 2000-137:1993Methods of test for petroleum and its products.Determination of oil content of water mixmetalworking oil dilutions

PTI/13

BS 2000-142:1993Methods of test for petroleum and its products.Determination of oxidation stability oflubricating grease. Oxygen bomb method

PTI/13

BS 2000-179:1993Methods of test for petroleum and its products.Determination of cone penetration ofpetrolatum

PTI/13

BS 2000-195:1998Methods of test for petroleum and its products.Determination of distillation characteristics ofvolatile organic liquids

PTI/13

BS 2000-213:1993Methods of test for petroleum and its products.Determination of neutralization value ofbitumen. Colour indicator titration method

PTI/13

BS 2000-223:1993Methods of test for petroleum and its products.Determination of ash of petroleum productscontaining mineral matter

PTI/13

BS 1449-1.14:1991Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specificationfor hot rolled narrow strip supplied in a rangeof conditions for heat treatment and generalengineering purposes

ISE/10

BS 1660-5:1996Machine tapers. Specification for reductionsleeves with external and internal 7/24 tapers

MTE/18

BS 1660-12:1996Machine tapers. Specification for positive driveof Morse tapers

MTE/18

BS 2000-0.1:1999Methods of test for petroleum and its products.General introduction. Specifications. IP standardthermometers

PTI/13

BS 2000-0.2:1996Methods of test for petroleum and its products.General introduction. Specifications for IPstandard reference liquids

PTI/13

BS 2000-0.4:1996Methods of test for petroleum and its products.General introduction. Barometric pressurecorrections

PTI/13

BS 2000-1:1995Methods of test for petroleum and its products.Determination of acidity, neutralization value.Colour indicator titration method

PTI/13

BS 2000-10:1995Methods of test for petroleum and its products.Determination of kerosine burningcharacteristics. 24 hour method

PTI/13

BS 2000-12:1993Methods of test for petroleum and its products.Determination of specific energy

PTI/13

BS 2000-35:1993Methods of test for petroleum and its products.Determination of open flash and fire point.Pensky-Martens method

PTI/13

BS 2000-48:1997Methods of test for petroleum and its products.Determination of oxidation characteristics oflubricating oil

PTI/13

BS 1377-2:1990Methods of test for soils for civil engineeringpurposes. Classification tests

B/526/3

BS 1377-3:1990Methods of test for soils for civil engineeringpurposes. Chemical and electro-chemical tests

B/526/3

BS 1377-4:1990Methods of test for soils for civil engineeringpurposes. Compaction-related tests

B/526/3

BS 1377-5:1990Methods of test for soils for civil engineeringpurposes. Compressibility, permeability anddurability tests

B/526/3

BS 1377-6:1990Methods of test for soils for civil engineeringpurposes. Consolidation and permeability testsin hydraulic cells and with pore pressuremeasurement

B/526/3

BS 1377-7:1990Methods of test for soils for civil engineeringpurposes. Shear strength tests (total stress)

B/526/3

BS 1377-8:1990Methods of test for soils for civil engineeringpurposes. Shear strength tests (effective stress)

B/526/3

BS 1407:1970Specification for high carbon bright steel (silversteel)

ISE/31

BS 1428-D4:1963(BS 797:1963)Microchemical apparatus. Volumetric analysis.Specification for capillary pipettes

LBI/36

BS 1449-1.1:1991Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Generalspecification

ISE/10

BS 1449-1.8:1991Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specificationfor hot rolled narrow strip based on formability

ISE/10


BS 4787-1:1980Internal and external wood doorsets, doorleaves and frames. Specification for dimensionalrequirements

B/538/2

BS 4811:1972Specification for the presentation of researchand development reports

IDT/2

BS 4812:1972Specification for the romanization of Japanese

IDT/2

BS 4875-8:1998Furniture. Strength and stability of furniture.Methods for determination of stability of non-domestic storage furniture

FW/0

BS 4894:1993Specification for bifurcated rivets for generalpurpose use (metric series)

FME/9/3

BS 5046:1974Method for the estimation of equivalentdiameters in the heat treatment of steel

ISE/31

BS 5248:1990Specification for aspirated hygrometer

LBI/36

BS 5252:1976Framework for colour co-ordination forbuilding purposes

STI/14

BS 5266-2:1998Emergency lighting. Code of practice forelectrical low mounted way guidance systemsfor emergency use

CPL/34/9

BS 5266-4:1999Emergency lighting. Code of practice for design,installation, maintenance and use of opticalfibre systems

CPL/34/9

BS 5266-5:1999Emergency lighting. Specification forcomponent parts of optical fibre systems

CPL/34/9

BS 5266-6:1999Emergency lighting. Code of practice for non-electrical low mounted way guidance systemsfor emergency use. Photoluminescent systems

CPL/34/9

BS 5276-2:2003Pressure vessel details (dimensions).Specification for saddle supports for horizontalcylindrical pressure vessels

PVE/1

BS 2543:2004Upholstery fabrics for end use applications.Classification

TCI/66

BS 2738-3:2004+A1:2008Spectacle lenses. Specification for thepresentation of prescriptions and prescriptionorders for ophthalmic lenses

CH/172/3

BS 2772-2:1989Colliery haulage and winding equipment.Specification for wrought steel

ISE/31

BS 2782-0:2004Methods of testing. Plastics. Introduction

PRI/21

BS 2782-7:Method 720B:1979Methods of testing plastics. Rheologicalproperties. Cup flow of phenolic and alkydmoulding materials

PRI/21

BS 2975-1:2004Sampling and analysis of glass-making sands.Methods for sampling and physical testing ofglass-making sands

LBI/36/5

BS 2979:1958Transliteration of Cyrillic and Greek characters

IDT/2

BS 3459:1985Specification for stands for drawing boards

TDW/4

BS 3509:1962Specification for spirit level vials

TDW/4

BS 4177:1992Specification for cooker control units

PEL/23

BS 4280:1968Transliteration of Arabic characters

IDT/2

BS 4315-2:1970Methods of test for resistance to air and waterpenetration. Permeable walling constructions(water penetration)

B/519/1

BS 4358:1968Glossary of terms used in air gauging withnotes on the technique

TDW/4

BS 4484-1:1969Specification for measuring instruments forconstructional works. Metric graduation andfiguring of instruments for linear measurement

TDW/4

BS 2000-272:2000Methods of test for petroleum and its products.Determination of mercaptan sulfur andhydrogen sulfide content of liquefiedpetroleum gases (LPG). Electrometric titrationmethod

PTI/13

BS 2000-306:1994Methods of test for petroleum and its products.Determination of oxidation stability of straightmineral oil

PTI/13

BS 2000-313:2001Methods of test for petroleum and its products.Determination of air release of lubricating andhydraulic oils

PTI/13

BS 2000-317:1995Methods of test for petroleum and its products.Determination of residues in liquefiedpetroleum gases. Low temperature evaporationmethod

PTI/13

BS 2000-346:1996Methods of test for petroleum and its products.Determination of polycyclic aromatics in unusedlubricating base oils and asphaltene freepetroleum fractions. Dimethyl sulphoxideextraction refractive index method

PTI/13

BS 2000-450:2000Methods of test for petroleum and its products.Diesel fuel. Assessment of lubricity using thehigh-frequency reciprocating rig (HFRR). Testmethod

PTI/13

BS 2000-454:2000Methods of test for petroleum and its products.Determination of phosphorus in gasoline.Spectrophotometric method

PTI/13

BS 2000-455:2001Methods of test for petroleum and its products.Determination of manganese in gasoline.Atomic absorption spectrometry (AAS) method

PTI/13

BS 2000-456:2000Methods of test for petroleum and its products.Determination of potassium in gasoline. Atomicabsorption spectrometry (AAS) method

PTI/13

BS 2457:1975Specification for protractors for drawing officeuse

TDW/4

BS 2459:1974Specification for set squares (fixed andadjustable) for drawing office use

TDW/4

British Standards Reviewed and Confirmed continued...


BS 5977-1:1981Lintels. Method for assessment of load

B/519/3

BS 6037-2:2004Code of practice for the planning, design,installation and use of permanently installedaccess equipment. Travelling ladders andgantries

B/514/39

BS 6133:1995Code of practice for safe operation of lead-acidstationary batteries

PEL/21

BS 6165:2002Specification for small disposable fireextinguishers of the aerosol type

FSH/2

BS 6172:2004Installation and maintenance of domestic gascooking appliances (2nd and 3rd family gases).Specification

GSE/30

BS 6259:1997Code of practice for the design, planning,installation, testing and maintenance of soundsystems

EPL/100/3

BS 6371:1983Recommendations for citation of unpublisheddocuments

IDT/2/2

BS 6381:1983Specification for drawing boards

TDW/4

BS 6404-20:1996Magnetic materials. Resistance and temperatureclassification of insulation coatings

ISE/NFE/5

BS 6643-1:1985Recharging fire extinguishers (manufactured toBS 5423 ’Specification for portable fireextinguishers’). Specification for procedure andmaterials

FSH/2

BS 6643-2:1985Recharging fire extinguishers (manufactured toBS 5423 ’Specification for portable fireextinguishers’). Specification for powder refillcharges

FSH/2

BS 5656-2:2004Escalator and moving walks. Safety rules for theconstruction and installation of escalators andmoving walks. Code of practice for theselection, installation and location of newescalators and moving walks

MHE/4

BS 5682:1998Specification for probes (quick connectors) foruse with medical gas pipeline systems

CH/121/1

BS 5854:1980Code of practice for flues and flue structures inbuildings

B/506

BS 5864:2004Installation and maintenance of gas-firedducted air heaters of rated input not exceeding70 kW net (2nd and 3rd family gases).Specification

GSE/30

BS 5867-1:2004Textiles and textile products. Curtains anddrapes. General requirements

TCI/66

BS 5884:1999Magnetic materials. Methods for thedetermination of the relative magneticpermeability of feebly magnetic materials

ISE/NFE/5

BS 5950-1:2000Structural use of steelwork in building. Code ofpractice for design. Rolled and welded sections

B/525/31

BS 5950-4:1994Structural use of steelwork in building. Code ofpractice for design of composite slabs withprofiled steel sheeting

B/525/4

BS 5950-6:1995Structural use of steelwork in building. Code ofpractice for design of light gauge profiled steelsheeting

B/525/31

BS 5950-8:2003Structural use of steelwork in building. Code ofpractice for fire resistant design

B/525/31

BS 5950-9:1994Structural use of steelwork in building. Code ofpractice for stressed skin design

B/525/31

BS 5285:1975Specification. Performance of A.C. electricventilating fans and regulators for non-industrial use

CPL/59

BS 5346:1976Specification. ISO metric trapezoidal screwthreads

FME/9/3

BS 5459-2:2000+A2:2008Specification for performance requirements andtests for office furniture. Office pedestal seatingfor use by persons weighing up to 150kg andfor use up to 24 hours a day, including type-approval tests for individual components

FW/0/3

BS 5507-1:1977Methods of test for falsework equipment. Floorcentres

B/514

BS 5507-3:1982Methods of test for falsework equipment. Props

B/514

BS 5605:1990Recommendations for citing and referencingpublished material

IDT/2/2

BS 5642-1:1978Sills and copings. Specification for window sillsof precast concrete, cast stone, clayware, slateand natural stone

B/519/3

BS 5642-2:1983Sills and copings. Specification for copings ofprecast concrete, cast stone, clayware, slate andnatural stone

B/519/3


Help Us to Help

You!




020 8996 9001


BS 7805-2:1997Swaged collar grooved rivets. Specification forsizes from 12.7 mm up to and including 34.9mm

FME/9/3

BS 7855-1:1996Metric rivets for the attachment of frictionlinings. Specification for semi-tubular rivets

FME/9/3

BS 7856:1996Code of practice for design of alternatingcurrent, watthour meters for active energy(classes 1 and 2)

PEL/13

BS 7899-1:1997Code of practice for assessment of hazard tolife and health from fire. General guidance

FSH/16

BS 7899-2:1999Code of practice for assessment of hazard tolife and health from fire. Guidance on methodsfor the quantification of hazards to life andhealth and estimation of time to incapacitationand death in fires

FSH/16

BS 7935-1:2004Constant amplitude dynamic force calibration.Calibration and verification of non-resonantuniaxial dynamic testing systems. Method

ISE/NFE/4/6

BS 7935-2:2004Constant amplitude force calibration.Calibration of the calibration deviceinstrumentation to be used for the dynamiccalibration of non-resonant uniaxial dynamictesting systems. Method

ISE/NFE/4/6

BS 7956:2000Specification for primers for woodwork

STI/28

BS 7971-5:2004Protective clothing and equipment for use inviolent situations and in training. Footwear.Requirements and test methods

PH/3/12

BS 7971-10:2004Protective clothing and equipment for use inviolent situations and in training. Coveralls.Requirements and test methods

PH/3/12

BS 8000-2.2:1990Workmanship on building sites. Code ofpractice for concrete work. Sitework with in situand precast concrete

B/525/2

BS 8008:1996+A1:2008Safety precautions and procedures for theconstruction and descent of machine-boredshafts for piling and other purposes

B/526

BS 7188:1998+A2:2009Impact absorbing playground surfacing.Performance requirements and test methods

SW/65

BS 7371-2:1993Coatings on metal fasteners. Specification fortorque/clamping force relationship

FME/9/1

BS 7371-4:1994Coatings on metal fasteners. Specification forelectroplated nickel, nickel/chromium andcopper/nickel/chromium coatings

FME/9/1

BS 7371-6:1998Coatings on metal fasteners. Specification forhot dipped galvanized coatings

FME/9/1

BS 7371-8:1998Coatings on metal fasteners. Specification forsherardized coatings

FME/9/1

BS 7371-9:1996Coatings on metal fasteners. Specification forphosphate or phosphate and oil coatings

FME/9/1

BS 7371-10:1994Coatings on metal fasteners. Specification fororganic coatings

FME/9/1

BS 7581:1992Guide to presentation of tables and graphs

IDT/2

BS 7647:1993Specification for radio teleswitches for tariffand load control

PEL/13

BS 7668:2004Weldable structural steels. Hot finishedstructural hollow sections in weather resistantsteels. Specification

ISE/12

BS 7697:1993Nominal voltages for low voltage publicelectricity supply systems

GEL/8

BS 7801:2004Escalators and moving walks. Code of practicefor safe working on escalators and movingwalks

MHE/4

BS 7805-1:1995Swaged collar grooved rivets. Specification forsizes up to and including 10 mm diameter

FME/9/3

BS 6734:2004Antimicrobial efficacy of disinfectants forveterinary and agricultural use. Method

CH/216

BS 6785:1986Code of practice for solar heating systems forswimming pools

RHE/25

BS 6788-2:1990Neurosurgical implants. Specification formarking and packaging of implantable neuralstimulators

CH/150/3

BS 6806:2002Textiles. Determination of formaldehyde.Method for the determination of total and free(water extraction method) formaldehyde usingchromotropic acid

TCI/80

BS 6999:1989Specification for vitreous-enamelled low-carbon-steel flue pipes, other components andaccessories for solid-fuel-burning applianceswith a rated output of 45 kW

B/506

BS 7014:1989Guide to the romanization of Chinese

IDT/2

BS 7036-1:1996Code of practice for safety at powered doorsfor pedestrian use. General

MHE/31

BS 7036-2:1996Code of practice for safety at powered doorsfor pedestrian use. Straight and curved slidingdoors and prismatic and folding doors

MHE/31

BS 7036-3:1996Code of practice for safety at powered doorsfor pedestrian use. Swing doors and balanceddoors

MHE/31

BS 7036-4:1996Code of practice for safety at powered doorsfor pedestrian use. Low energy swing doors

MHE/31

BS 7036-5:1996Code of practice for safety at powered doorsfor pedestrian use. Revolving doors

MHE/31

BS 7172:1989Guide to assessment of position, size anddeparture from nominal form of geometricfeatures

TDW/4



PD 0017:2001Business documents. Guidance on effectivelayout and presentation

IDT/2

PD 0018:2001Information management systems. Buildingsystems fit for audit

ICT/-

PD 0023:2001Test target for assessing output quality of black-and-white document scanners in accordancewith BS ISO 12653

IDT/1

PD 0028:2002Quantitative software management. Softwaremeasurement methods. A guide to the use ofISO/IEC and other standards for obtaining andusing software measurements for product andprocess improvement

IST/15

PD 6433:1969Guide to the application of stress analysis todesign

PVE/1

PD 6439:1969A review of the methods of calculating stressesdue to local loads and local attachments ofpressure vessels

PVE/1

PD 6461-4:2004General metrology. Practical guide tomeasurement uncertainty

SS/6

PD 6503-2:1988Toxicity of combustion products. Guide to therelevance of small-scale tests for measuring thetoxicity of combustion products of materialsand composites

FSH/16

PD 6631:1998Technical guide to ISO/IEC 13522-5:1997.Information technology. Coding of multimediaand hypermedia information. Support for base-level interactive applications (MHEG-5)

IST/37

PD 6777:2003Guide to practical implementation of JPEG 2000

IST/37

PD 7500:2003Knowledge management. Vocabulary

KMS/1

PD 7501:2003Managing culture and knowledge. Guide togood practice

KMS/1

BS EN 14662-4:2005Ambient air quality. Standard method formeasurement of benzene concentrations.Diffusive sampling followed by thermaldesorption and gas chromatography

EH/2/3

BS EN 14662-5:2005Ambient air quality. Standard method formeasurement of benzene concentrations.Diffusive sampling followed by solventdesorption and gas chromatography

EH/2/3

BS EN ISO 16000-9:2006Indoor air. Determination of the emission ofvolatile organic compounds from buildingproducts and furnishing. Emission test chambermethod

EH/2/3

BS EN ISO 16000-10:2006Indoor air. Determination of the emission ofvolatile organic compounds from buildingproducts and furnishing. Emission test cellmethod

EH/2/3

BS EN ISO 16000-11:2006Indoor air. Determination of the emission ofvolatile organic compounds from buildingproducts and furnishing. Sampling, storage ofsamples and preparation of test specimens

EH/2/3

BS ISO 5468:2006Rotary and rotary impact masonry drill bits withhardmetal tips. Dimensions

MTE/18

BS ISO 17560:2002Surface chemical analysis. Secondary-ion massspectrometry. Method for depth profiling ofboron in silicon

CII/60

BS ISO 20341:2003Surface chemical analysis. Secondary-ion massspectrometry. Method for estimating depthresolution parameters with multiple delta-layerreference materials

CII/60

PD CLC/TR 50373:2004Wind turbines. Electromagnetic compatibility

PEL/88

PD CLC/TR 50422:2003Guide for the application of the EuropeanStandard EN 50160

GEL/8

PD 0006:1995Technical guide to JPEG. Digital compression ofphotographic images

IST/37

PD 0016:2001Document scanning. Guide to scanning businessdocuments

ICT/-

BS 8204-2:2003+A1:2009Screeds, bases and in situ floorings. Concretewearing surfaces. Code of practice

B/507/6

BS 8204-3:2004+A1:2009Screeds, bases and in situ floorings. Polymermodified cementitious levelling screeds andwearing screeds. Code of practice

B/507/6

BS 8204-4:2004Screeds, bases and in situ floorings.Cementitious terrazo wearing surfaces. Code ofpractice

B/507/6

BS 8204-5:2004Screeds, bases and in situ floorings. Masticasphalt underlays and wearing surfaces. Codeof practice

B/507/6

BS 8427:2004Jug water filter systems. Specification

B/504

BS 8428:2004Protective clothing. Protection against liquidchemicals. Performance requirements forchemical protective suits with liquid-tightconnections between different parts of theclothing for emergency teams (type 3-ETequipment)

PH/3/3

BS 5252F:1976Colour matching fan

STI/14

DD 180:1989Guide for the assessment of toxic hazards in firein buildings and transport

FSH/16

BS EN 14662-1:2005Ambient air quality. Standard method formeasurement of benzene concentrations.Pumped sampling followed by thermaldesorption and gas chromatography

EH/2/3

BS EN 14662-2:2005Ambient air quality. Standard method formeasurement of benzene concentrations.Pumped sampling followed by solventdesorption and gas chromatography

EH/2/3

BS EN 14662-3:2005Ambient air quality. Standard method formeasurement of benzene concentrations.Automated pumped sampling with in situ gaschromatography

EH/2/3


BS 5685-5:1987Electricity meters. Specification for input andoutput switching or logic arrangements formulti-rate registers for electricity meters

PEL/13

This standard has been re-declared as obsolescent asParts 1-4 have already been declared obsolescent

BS 5685-8:1991Electricity meters. Specification for impulseoperated multiple registers for use withinduction electricity meters

PEL/13

This standard has been re-declared as obsolescent asParts 1-4 have already been declared obsolescent

BS 7114-1:1988Fireworks. Classification of fireworks

CII/47

This standard has been re-declared as obsolescent asBS 7114 is being superseded by BS implementationsof the EN 14035 series but the new standards willbe issued over a period of about two years. BS 7114is cited in The Fireworks (Safety) Regulations 1997and the Regulations will not be revised until a fullset of standards is available. In the meantimesuppliers in the United Kingdom will be required bylaw to comply with BS 7114

BS 7114-2:1988Fireworks. Specification for fireworks

CII/47

This standard has been re-declared as obsolescent asBS 7114 is being superseded by BS implementationsof the EN 14035 series. The new standards will beissued over a period of about two years. BS 7114 iscited in The Fireworks (Safety) Regulations 1997 andthe Regulations will not be revised until a full set ofstandards is available. In the meantime suppliers inthe United Kingdom will be required by law tocomply with BS 7114

BS 7114-3:1988Fireworks. Methods of test for fireworks

CII/47

This standard has been re-declared as obsolescent asBS 7114 is being superseded by BS implementationsof the EN 14035 series. The new standards will beissued over a period of about two years. BS 7114 iscited in The Fireworks (Safety) Regulations 1997 andthe Regulations will not be revised until a full set ofstandards is available. In the meantime suppliers inthe United Kingdom will be required by law tocomply with BS 7114

BS 7208-2:1991Contact lenses. Method of classifying contactlens materials

CH/172

This standard has been re-declared as obsolescent asit is no longer relevant

BS 7332:1990Specification for decorative continuouslaminates (DCL) based on thermosetting resins

PRI/76

This standard has been declared as obsolescent as itis rarely used or referred to and is largelysuperseded by the BS EN 438 series which refers todifferent manufacturing parameters but covers thesame products

BS 1974:1953Specification for large aluminium alloy rivets (1⁄2in. to 1 in. nominal diameters)

FME/9/3

This standard has been re-declared as obsolescent asit is no longer used for current technologies

BS 3129:1959Specification for latex foam rubber componentsfor furniture

PRI/71

This standard has been re-declared as obsolescentfor a further period

BS 3575:1963Specification for rivets for the attachment offriction linings

FME/9/3


BS 3810-1:1964Glossary of terms used in materials handling.Terms used in connection with pallets, stillages,hand and powered trucks

MHE/7

This standard has been re-declared as obsolescentfor a further period as the national committeeconsiders it to be out of date and incomplete toreflect the current state of art

BS 3810-4:1968Glossary of terms used in materials handling.Terms used in connection with cranes

MHE/3/1

This standard has been re-declared as obsolescent asthe national committee considers it to be out ofdate and incomplete to reflect the current state ofart

BS 4620:1970Specification for rivets for general engineeringpurposes

FME/9/3


BS 4672-1:1971Guide to hazards in the transport and storageof packages. Climatic hazards

PKW/0


BS 4672-2:1971Guide to hazards in the transport and storageof packages. Climatic hazards (maps anddiagrams)

PKW/0


BS 5276-4:1977Pressure vessel details (dimensions).Standardized pressure vessels

PVE/1


PD 7502:2003Guide to measurements in knowledgemanagement

KMS/1

PD 7503:2003Introduction to knowledge management inconstruction

KMS/1

PD 8010-1:2004Code of practice for pipelines. Steel pipelineson land

PSE/17/2

PD 8010-2:2004Code of practice for pipelines. Subsea pipelines

PSE/17/2

BS AU 170:1979Methods for measurement of reflectance ofrear view mirrors

AUE/12

CP 2010-2:1970Code of practice for pipelines. Design andconstruction of steel pipelines in land

PSE/17

CP 2012-1:1974Code of practice for foundations for machinery.Foundations for reciprocating machines

B/526

BRITISH STANDARDSDECLARED OBSOLESCENT

Declaration of obsolescence indicates thatthe standard is not recommended for usein new equipment but needs to beretained for the servicing of existingequipment that is expected to have along working life.

BS 275:1927Specification for dimensions of rivets (1⁄2 inch to13⁄4 inch diameter)

FME/9/3


BS 641:1951Dimensions of small rivets for general purposes

FME/9/3


BS 1109:1943Specification for cold forged mild steel rivetsfor cold closing

FME/9/3




BRITISH STANDARDSPROPOSED FORWITHDRAWAL

A note of any objections to thesewithdrawals should be sent to DebbieStead, Head of Committee Service Centre– Operations, BSI Head Office, 389Chiswick High Road, London W4 4AL orvia email [email protected] by28 February, 2010.

Where any standard in this list has beenamended since publication, a proposal towithdraw also includes all amendmentspublished to date.

BS 4899-1:1991Guide to user’s requirements for technicalmanuals (based on the principles of BS 4884).Content

DS/1

This standard has been proposed for withdrawal asit conflicts with BS EN 62079:2001

BS 4899-2:1992Guide to user’s requirements for technicalmanuals (based on the principles of BS 4884).Presentation

DS/1

This standard has been proposed for withdrawal asit conflicts with BS EN 62079:2001

BRITISH STANDARDSWITHDRAWN

If any standard in this list has beenamended since publication, allamendments published to date are alsowithdrawn

BS 3015:1991Glossary of terms relating to mechanicalvibration and shock

GME/21/1

Superseded by BS ISO 2041:2009

BS 3483-B3:1982Methods for testing pigments for paints.Determination of residue on sieve (watermethod, using a manual procedure)

STI/1

Superseded by BS EN ISO 787-7:2009

BS 4361-0:1990Woodworking machines. Classification ofwoodworking machines and auxiliary machinesused for woodworking

MTE/23

This standard had been superseded byBS EN 861:1998, but was never withdrawn.BS EN 861:1998 has since been withdrawn andsuperseded by BS EN 861:2007

BS L 170:1989Specification for extruded bars and sections ofaluminium-zinc-copper-chromium alloy(solution treated, controlled stretched andartificially aged) (not exceeding 150 mmdiameter or minor sectional dimension) (Zn 5.6,Mg 2.5, Cu 1.6, Cr 0.23) (7075)

ACE/61/-/24


BS 5X 17:1998Specification for oleoresinous varnish foraerospace purposes

ACE/65/-/3

This standard has been re-declared as obsolescentfor a further period as although there are stilldemands for this product to be used, thespecification would not be used for newtechnologies or designs

BS HC 401:1974Specification for 18% nickel maraging steelprecision castings (1600-1850 MPa)

ACE/61/-/15

This standard has been re-declared as obsolescentfor a further period as it is no longer required fornew designs

BS HC 402:1977Specification for cast iron ring pots(centrifugally cast) (suitable for piston rings upto 200 mm in diameter)

ACE/61/-/15

This standard has been re-declared as obsolescentfor a further period as it is no longer required fornew designs

BS SP 57 and 58:1955Specifications for rivet burrs for aircraft

ACE/12


CP 143-1:1958Code of practice for sheet roof and wallcoverings. Aluminium, corrugated and troughed

B/542/6


BS 7881:1997Method of test for petrol filters

MCE/21/6

This standard has been re-declared as obsolescentfor a further period as it is not used in theUK industry where filter companies have invested infar more sophisticated instruments to measureparticle size in fluids. The standard is retained asthere may still be a need for the standard in lessdeveloped countries where companies have not, orare unable to invest in modern instruments.However, MCE/21/6 will not maintain the standardas there is not any expertise available in this field

BS 9000-1:1989General requirements for a system forelectronic components of assessed quality.Specification of general procedures

EPL/40X


BS 9000-5:1989General requirements for a system forelectronic components of assessed quality.Specification of qualification approval andconformance testing procedures

EPL/40X


BS 9000-6:1989General requirements for a system forelectronic components of assessed quality.Specification of capability approval procedures

EPL/40X


BS 9000-7:1989General requirements for a system forelectronic components of assessed quality.Specification of lot formation, releaseprocedures and certified test records

EPL/40X


PD 6505:1982Guide to the romanization of Korean

IDT/2


PD 6510:1983A review of the present state of the art ofassessing remanent life of pressure vessels andpressurized systems designed for hightemperature service

PVE/1

This standard has been re-declared as obsolescentby PVE/1 as there is no available expertise or desireto review and/or update the document, althoughthe content is still valuable in support of pressurevessels and boilers. It contains important contentthat is not documented in any other British Standardor Published Document and as such should remainavailable


Please

do not send

confirmation

of

orders placed by

telephone

as it can lead to

duplication

DD CEN/TS 15749:2008Fertilizers. Determination of sulfates contentusing three different methods

CII/37

Superseded by BS EN 15749:2009

BS EN 20287:1994Paper and board. Determination of moisturecontent. Oven-drying method

PAI/11

Superseded by BS EN ISO 287:2009

BS EN 23907:1993Hardmetals. Determination of total carboncontent. Gravimetric method

ISE/65


BS EN 29117:1992Methods of test for paints. Tests associated withpaint film formation. Paints and varnishes.Determination of through-dry state andthrough-dry time. Method of test

STI/10

Superseded by BS EN ISO 9117-1:2009

BS CECC 41000:1977Harmonized system of quality assessment forelectronic components: generic specification forpotentiometers

EPL/40X

Superseded by BS EN 60393-1:2009

BS ISO 2470:1999Paper, board and pulps. Measurement of diffuseblue reflectance factor (ISO brightness)

I/-

Superseded by BS ISO 2470-1:2009

BS ISO 4918:2009Resilient, textile and laminate floor coverings.Castor chair test

PRI/60

This standard has been withdrawn as it conflictswith BS EN standards already covering these tests.They are BS EN 985:2001 and BS EN 425:2002

BS 7854-4:1998Mechanical vibration. Evaluation of machinevibration by measurements on non-rotatingparts. Gas turbine driven sets excluding aircraftderivatives

GME/21/5


BS 8409:2002Soft indoor play areas. Code of practice

SW/65

Superseded by BS 8409:2009 and BS EN 1176-10:2008

BS EN 1176-1:1998Playground equipment. General safetyrequirements and test methods

SW/65


BS EN 1176-2:1998Playground equipment. Additional specificsafety requirements and test methods forswings

SW/65


BS EN 1176-3:1998Playground equipment. Additional specificsafety requirements and test methods for slides

SW/65


BS EN 1176-4:1998Playground equipment. Additional specificsafety requirements and test methods forrunways

SW/65


BS EN 1176-5:1999Playground equipment. Additional specificsafety requirements and test methods forcarousels

SW/65


BS EN 1176-6:1998Playground equipment. Additional specificsafety requirements and test methods forrocking equipment

SW/65


BS EN 1176-7:1997Playground equipment. Guidance oninstallation, inspection, maintenance andoperation

SW/65


DD ENV 14232:2003Advanced technical ceramics. Terms, definitionsand abbreviations

RPI/13

Superseded by BS EN 14232:2009

BS 4361-20:1990Woodworking machines. Specification for singleblade circular sawing machines with travellingtable

MTE/23

This standard had been superseded by BS EN1870-1:1999, but was never withdrawn.BS EN 1870-1:1999 has since been withdrawn and superseded by BS EN 1870-1:2007

BS 4361-39:1990Woodworking machines. Nomenclature forcircular sawing machines for building sites

MTE/23

This standard had been superseded by BS EN1870-1:1999, but was never withdrawn.BS EN 1870-1:1999 has since been withdrawn and superseded by BS EN 1870-1:2007

BS 4585-1:1983Methods of test for spices and condiments.Determination of extraneous matter

AW/7


BS 6127-2:1982Petrographic analysis of bituminous coal andanthracite. Method of preparing coal samplesfor petrographic analysis

PTI/15


BS 6127-3:1995Petrographic analysis of bituminous coal andanthracite. Method of determining maceralgroup composition of bituminous coal andanthracite

PTI/16


BS 6127-5:1995Petrographic analysis of bituminous coal andanthracite. Method of determiningmicroscopically the reflectance of vitrinite

PTI/16


BS 6290-4:1997Lead-acid stationary cells and batteries.Specification for classifying valve regulatedtypes

PEL/21

Superseded by BS EN 60896-21:2004 andBS EN 60896-22:2004

BS 6955-11:1994Calibration of vibration and shock pick-ups.Method of test for transverse vibrationsensitivity

GME/21/2


BS 7545:1991Method for removal of corrosion products fromcorrosion test specimens of metals and alloys

ISE/NFE/8

Superseded by BS ISO 8407:2009

British Standards Withdrawn continued...


Help Us to Help

You!




020 8996 9001


BS 6068-2.49:1995(ISO 10566:1994)Water quality. Physical, chemical andbiochemical methods. Determination ofaluminium. Spectrometric method usingpyrocatechol violet

EH/3/2

BS 6325:1982(ISO 6078:1982)Glossary of terms relating to black tea

AW/8

BS 6362:1990(ISO 7598:1988)Specification for stainless steel tubes suitablefor screwing in accordance with BS 21 ’Pipethreads for tubes and fittings where pressure-tight joints are made on the threads’

ISE/8

BS 6590:1985(ISO 6898:1984)Specification for capacity ratings anddimensions of power presses, mechanical openfront type

MTE/1

BS 6986-2:1988(ISO 6770:1982)Analysis of instant tea. Methods fordetermination of free-flow and compacted bulkdensities

AW/8

BS 7030:1988(ISO 7991:1987)Method for determination of the coefficient ofmean linear thermal expansion of glass

LBI/36

BS 7034-2:1988(ISO 7884-2:1987)Viscosity and viscometric fixed points of glass.Method for the determination of viscosity byrotation viscometers

LBI/36

BS 7034-3:1988(ISO 7884-3:1987)Viscosity and viscometric fixed points of glass.Method for the determination of viscosity byfibre elongation viscometer

LBI/36

BS 7034-4:1988(ISO 7884-4:1987)Viscosity and viscometric fixed points of glass.Method for the determination of viscosity bybeam bending

LBI/36

BS 7034-5:1988(ISO 7884-5:1987)Viscosity and viscometric fixed points of glass.Method for the determination of working pointby sinking bar viscometer

LBI/36

BS 6049-2:1981(ISO 1573:1980)Methods of test for tea. Determination of lossin mass at 103ºC

AW/8

BS 6049-4:1988(ISO 1575:1987)Methods of test for tea. Determination of totalash

AW/8

BS 6049-5:1989(ISO 1576:1988)Methods of test for tea. Determination ofwater-soluble ash and water-insoluble ash

AW/8

BS 6049-6:1988(ISO 1577:1987)Methods of test for tea. Determination of acid-insoluble ash

AW/8

BS 6049-7:1981(ISO 1578:1975)Methods of test for tea. Determination ofalkalinity of water-soluble ash

AW/8

BS 6068-1.4:1993(ISO 6107-4:1993)Water quality. Glossary. An additional 18 terms

EH/3

BS 6068-2.31:1987(ISO 6333:1986)Water quality. Physical, chemical andbiochemical methods. Method fordetermination of manganese: formaldoximespectrometric method

EH/3/2

BS 6068-2.37:1990(ISO 9297:1989)Water quality. Physical, chemical andbiochemical methods. Method for thedetermination of chloride via a silver nitratetitration with chromate indicator (Mohr’smethod)

EH/3/2

BS 6068-2.47:1995(ISO 11083:1994)Water quality. Physical, chemical andbiochemical methods. Determination ofchromium (VI). Spectrometric method using 1,5-diphenylcarbazide

EH/3/2

BS 6068-2.48:1995(ISO 10359-2:1994)Water quality. Physical, chemical andbiochemical methods. Determination ofinorganically bound total fluoride afterdigestion and distillation

EH/3/2

BRITISH STANDARDS UNDERREVIEW

The following British Standardsimplement International and/or EuropeanStandards which are currently underreview to see if they should be confirmed,revised or withdrawn.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL or via email [email protected] by28 February, 2010, in order to beconsidered by the relevantUK Committee.

BS 3680-8H:1996(ISO 11655:1995)Measurement of liquid flow in open channels.Measuring instruments and equipment. Methodof specifying the performance of hydrometricequipment

CPI/113/5

BS 3900-F15:1995(ISO 11503:1995)Methods of test for paints. Determination ofresistance to humidity (intermittentcondensation)

STI/10

BS 4499:1984(ISO 692:1982)Method for determination of alkali solubility ofpulp

I/-

BS 4656-34:1985(ISO 6899:1984)Accuracy of machine tools and methods of test.Specification for power presses, mechanicalopen front type

MTE/1

BS 4747-2:1995(ISO 801-2:1994)Methods for determination of saleable mass, inlots, of pulp. Pulps (such as flash-dried pulps)baled in slabs

I/-

BS 5898:1980(ISO 384:1978)Specification for principles of design andconstruction of volumetric glassware forlaboratory use

LBI/36

BS 6049-1:1981(ISO 1572:1980)Methods of test for tea. Preparation of groundsample of known dry matter content

AW/8


BS EN ISO 2812-3:2007Paints and varnishes. Determination ofresistance to liquids. Method using anabsorbent medium

STI/10

BS EN ISO 2812-4:2007Paints and varnishes. Determination ofresistance to liquids. Spotting methods

STI/10

BS EN ISO 2812-5:2007Paints and varnishes. Determination ofresistance to liquids. Temperature-gradientoven method

STI/10

BS EN ISO 3059:2001Non-destructive testing. Penetrant testing andmagnetic particle testing. Viewing conditions

WEE/46

BS EN ISO 3166-1:2006Codes for the representation of names ofcountries and their subdivisions. Country codes

IDT/2/11

BS EN ISO 3678:1995(BS 3900-C8:1978)Paints and varnishes. Print-free test

STI/10

BS EN ISO 3822-1:1999+A1:2008Acoustics. Laboratory tests on noise emissionfrom appliances and equipment used in watersupply installations. Method of measurement

EH/1/6

BS EN ISO 4623-1:2002(BS 3900-F13:2002)Paints and varnishes. Determination ofresistance to filiform corrosion. Steel substrates

STI/10

BS EN ISO 5267-1:2001Pulps. Determination of drainability. Schopper-Riegler method

PAI/11

BS EN ISO 5455:1995(BS 308-1.4:1995)Technical drawings. Scales

TDW/4

BS EN ISO 5667-1:2006(BS 6068-6.1:2006)Water quality. Sampling. Guidance on thedesign of sampling programmes and samplingtechniques

EH/3/6

BS EN ISO 5961:1995(BS 6068-2.21:1995)Water quality. Determination of cadmium byatomic absorption spectrometry

EH/3/2

BS 7709-6:1993(ISO 10136-6:1993)Analysis of extract solutions of glass. Methodfor determination of boron (III) oxide bymolecular absorption spectrometry

LBI/36

DD 234:1996(ISO/TR 11211:1995)Grading polished diamonds. Terminology andclassification

STI/53

BS EN ISO 140-18:2006Acoustics. Measurement of sound insulation inbuildings and of building elements. Laboratorymeasurement of sound generated by rainfall onbuilding elements

EH/1/6

BS EN ISO 801-1:1997Pulps. Determination of saleable mass in lots.Pulp baled in sheet form

I/-

BS EN ISO 801-3:1997Pulps. Determination of saleable mass in lots.Unitized bales

I/-

BS EN ISO 1524:2002(BS 3900-C6:2000)Paints, varnishes and printing inks.Determination of fineness of grind

STI/10

BS EN ISO 2692:2006Geometrical product specifications (GPS).Geometrical tolerancing. Maximum materialrequirement (MMR), least material requirement(LMR) and reciprocity requirement (RPR)

TDW/4

BS EN ISO 2806:1997Industrial automation systems. Numericalcontrol of machines. Vocabulary

AMT/4

BS EN ISO 2808:2007(BS 3900-C5:2007)Paints and varnishes. Determination of filmthickness

STI/10

BS EN ISO 2812-1:2007Paints and varnishes. Determination ofresistance to liquids. Immersion in liquids otherthan water

STI/10

BS EN ISO 2812-2:2007Paints and varnishes. Determination ofresistance to liquids. Water immersion method

STI/10

BS 7034-6:1988(ISO 7884-6:1987)Viscosity and viscometric fixed points of glass.Method for the determination of softeningpoint

LBI/36

BS 7034-7:1988(ISO 7884-7:1987)Viscosity and viscometric fixed points of glass.Method for the determination of annealingpoint and strain point by beam bending

LBI/36

BS 7034-8:1988(ISO 7884-8:1987)Viscosity and viscometric fixed points of glass.Method for the determination of (dilatometric)transformation temperature

LBI/36

BS 7463-6:1995(ISO 9184-6:1994)Fibre furnish analysis of paper, board and pulps.Determination of fibre coarseness

I/-

BS 7463-7:1995(ISO 9184-7:1994)Fibre furnish analysis of paper, board and pulps.Determination of weight factors

I/-

BS 7709-1:1993(ISO 10136-1:1993)Analysis of extract solutions of glass. Methodfor determination of silicon dioxide bymolecular absorption spectrometry

LBI/36

BS 7709-2:1993(ISO 10136-2:1993)Analysis of extract solutions of glass. Methodfor determination of sodium oxide andpotassium oxide by flame spectrometricmethods

LBI/36

BS 7709-3:1993(ISO 10136-3:1993)Analysis of extract solutions of glass. Methodfor determination of calcium oxide andmagnesium oxide by flame atomic absorptionspectrometry

LBI/36

BS 7709-4:1993(ISO 10136-4:1993)Analysis of extract solutions of glass. Methodfor determination of aluminium oxide bymolecular absorption spectrometry

LBI/36

BS 7709-5:1993(ISO 10136-5:1993)Analysis of extract solutions of glass. Methodfor determination of iron (III) oxide bymolecular absorption spectrometry and flameatomic absorption spectrometry

LBI/36

British Standards Under Review continued...


BS EN ISO 11997-2:2006(BS 3900-F19:2006)Paints and varnishes. Determination ofresistance to cyclic corrosion conditions. Wet(salt fog)/dry/humidity/UV light

STI/10

BS EN ISO 12213-1:2009Natural gas. Calculation of compression factor.Introduction and guidelines

PTI/15

BS EN ISO 12213-2:2009Natural gas. Calculation of compression factor.Calculation using molar-composition analysis

PTI/15

BS EN ISO 12213-3:2009Natural gas. Calculation of compression factor.Calculation using physical properties

PTI/15

BS EN ISO 12944-5:2007Paints and varnishes. Corrosion protection ofsteel structures by protective paint systems.Protective paint systems

STI/27

BS EN ISO 13503-4:2006Petroleum and natural gas industries.Completion fluids and materials. Procedure formeasuring stimulation and gravel-pack fluidleakoff under static conditions

PSE/17/-/3

BS EN ISO 13703:2000Petroleum and natural gas industries. Designand installation of piping systems on offshoreproduction platforms

PSE/17

BS EN ISO 13704:2007Petroleum, petrochemical and natural gasindustries. Calculation of heater-tube thicknessin petroleum refineries

PSE/17/-/6

BS EN ISO 13716:2000Dentistry. Reversible-irreversible hydrocolloidimpression material systems

CH/106/2

BS EN ISO 13803:2004(BS 3900-D13:2000)Paints and varnishes. Determination ofreflection haze on paint films at 20 degrees

STI/10

BS EN ISO 13849-1:2008Safety of machinery. Safety-related parts ofcontrol systems. General principles for design

MCE/3

BS EN ISO 13850:2008Safety of machinery. Emergency stop. Principlesfor design

MCE/3

BS EN ISO 9963-1:1996(BS 6068-2.51:1996)Water quality. Determination of alkalinity.Determination of total and composite alkalinity

EH/3/2

BS EN ISO 9963-2:1996(BS 6068-2.52:1996)Water quality. Determination of alkalinity.Determination of carbonate alkalinity

EH/3/2

BS EN ISO 10438-1:2007Petroleum, petrochemical and natural gasindustries. Lubrication, shaft-sealing andcontrol-oil systems and auxiliaries. Generalrequirements

PSE/17/-/6

BS EN ISO 10438-2:2007Petroleum, petrochemical and natural gasindustries. Lubrication, shaft-sealing andcontrol-oil systems and auxiliaries. Special-purpose oil systems

PSE/17/-/6

BS EN ISO 10438-3:2007Petroleum, petrochemical and natural gasindustries. Lubrication, shaft-sealing andcontrol-oil systems and auxiliaries. General-purpose oil systems

PSE/17/-/6

BS EN ISO 10438-4:2007Petroleum, petrochemical and natural gasindustries. Lubrication, shaft-sealing andcontrol-oil systems and auxiliaries. Self-actinggas seal support systems

PSE/17/-/6

BS EN ISO 10441:2007Petroleum, petrochemical and natural gasindustries. Flexible couplings for mechanicalpower transmission. Special-purposeapplications

PSE/17/-/6

BS EN ISO 11091:1999Construction drawings. Landscape drawingpractice

B/555

BS EN ISO 11126-10:2004(BS 7079-F10:2004)Preparation of steel substrates beforeapplication of paints and related products.Specifications for non-metallic blast-cleaningabrasives. Almandite garnet

STI/21

BS EN ISO 11507:2007(BS 3900-F16:2007)Paints and varnishes. Exposure of coatings toartificial weathering. Exposure to fluorescentUV lamps and water

STI/10

BS EN ISO 6222:1999(BS 6068-4.5:1999)Water quality. Enumeration of culturable micro-organisms. Colony count by inoculation in anutrient agar culture medium

EH/3/4

BS EN ISO 7027:2000(BS 6068-2.13:2000)Water quality. Determination of turbidity

EH/3/2

BS EN ISO 7500-2:2006Metallic materials. Verification of static uniaxialtesting machines. Tension creep testingmachines. Verification of the applied force

ISE/NFE/4/1

BS EN ISO 7784-3:2006(BS 3900-E16:2000)Paints and varnishes. Determination ofresistance to abrasion. Reciprocating test panelmethod

STI/10

BS EN ISO 7980:2000(BS 6068-2.30:1987)Water quality. Determination of calcium andmagnesium. Atomic absorption spectrometricmethod

EH/3/2

BS EN ISO 8044:2000Corrosion of metals and alloys. Basic terms anddefinitions

ISE/NFE/8

BS EN ISO 8501-1:2007Preparation of steel substrates beforeapplication of paints and related products.Visual assessment of surface cleanliness. Rustgrades and preparation grades of uncoatedsteel substrates and of steel substrates afteroverall removal of previous coatings

STI/21

BS EN ISO 8504-1:2001(BS 7079-D1:2000)Preparation of steel substrates beforeapplication of paints and related products.Surface preparation methods. General principles

STI/21

BS EN ISO 8504-2:2001(BS 7079-D2:2000)Preparation of steel substrates beforeapplication of paints and related products.Surface preparation methods. Abrasive blastcleaning

STI/21

BS EN ISO 9706:2000Information and documentation. Paper fordocuments. Requirements for permanence

I/-

BS EN ISO 9934-1:2001Non-destructive testing. Magnetic particletesting. General principles

WEE/46


BS EN ISO 15792-3:2008Welding consumables. Test methods.Classification testing of positional capacity androot penetration of welding consumables in afillet weld

WEE/39

BS EN ISO 15841:2006Dentistry. Wires for use in orthodontics

CH/106/1

BS EN ISO 16266:2008Water quality. Detection and enumeration ofPseudomonas aeruginosa. Method bymembrane filtration

EH/3/4

BS EN ISO 16276-1:2007Corrosion protection of steel structures byprotective paint systems. Assessment of, andacceptance criteria for, the adhesion/cohesion(fracture strength) of a coating. Pull-off testing

STI/27

BS EN ISO 16276-2:2007Corrosion protection of steel structures byprotective paint systems. Assessment of, andacceptance criteria for, the adhesion/cohesion(fracture strength) of a coating. Cross-cuttesting and X-cut testing

STI/27

BS EN ISO 16773-1:2007Paints and varnishes. Electrochemicalimpedance spectroscopy (EIS) on high-impedance coated specimens. Terms anddefinitions

STI/10

BS EN ISO 16773-2:2007Paints and varnishes. Electrochemicalimpedance spectroscopy (EIS) on high-impedance coated specimens. Collection of data

STI/10

BS EN ISO 17132:2007Paints and varnishes. T-bend test

STI/10

BS EN ISO 17776:2002Petroleum and natural gas industries. Offshoreproduction installations. Guidance on tools andtechniques for hazard identification and riskassessment

PSE/17

BS EN ISO 17872:2007Paints and varnishes. Guidelines for theintroduction of scribe marks through coatingson metallic panels for corrosion testing

STI/10

BS EN ISO 19903:2006Petroleum and natural gas industries. Fixedconcrete offshore structures

B/525/12

BS EN ISO 15181-1:2007Paints and varnishes. Determination of releaserate of biocides from antifouling paints.General method for extraction of biocides

STI/10

BS EN ISO 15181-2:2007Paints and varnishes. Determination of releaserate of biocides from antifouling paints.Determination of copper-ion concentration inthe extract and calculation of the release rate

STI/10

BS EN ISO 15181-3:2007(BS 3900-K3:2007)Paints and varnishes. Determination of releaserate of biocides from antifouling paints.Calculation of the zinc ethylene-bis(dithiocarbamate)(zineb) release rate bydetermination of the concentration ofethylenethiourea in the extract

STI/10

BS EN ISO 15318:2000Pulp, paper and board. Determination of 7specified polychlorinated biphenyls (PCB)

I/-

BS EN ISO 15403-1:2008Natural gas. Natural gas for use as acompressed fuel for vehicles. Designation of thequality

PTI/15

BS EN ISO 15528:2000Paints, varnishes and raw materials for paintsand varnishes. Sampling

STI/10

BS EN ISO 15535:2006General requirements for establishinganthropometric databases

PH/9/4

DD CEN/TS 15674:2007Air quality. Measurement of stationary sourceemissions. Guidelines for the elaboration ofstandardised methods

EH/2/1

DD CEN/TS 15675:2007Air quality. Measurement of stationary sourceemissions. Application of EN ISO/IEC 17025:2005to periodic measurements

EH/2/1

BS EN ISO 15792-1:2008Welding consumables. Test methods. Testmethods for all-weld metal test specimens insteel, nickel and nickel alloys

WEE/39

BS EN ISO 15792-2:2008Welding consumables. Test methods.Preparation of single-run and two-runtechnique test specimens in steel

WEE/39

BS EN ISO 14224:2006Petroleum, petrochemical and natural gasindustries. Collection and exchange of reliabilityand maintenance data for equipment

PSE/17

BS EN ISO 14270:2001Specimen dimensions and procedure formechanized peel testing resistance spot, seamand embossed projection welds

WEE/2

BS EN ISO 14272:2001Specimen dimensions and procedure for crosstension testing resistance spot and embossedprojection welds

WEE/2

BS EN ISO 14273:2001Specimen dimensions and procedure for sheartesting resistance spot, seam and embossedprojection welds

WEE/2

BS EN ISO 14402:1999(BS 6068-2.68:1999)Water quality. Determination of phenol indexby flow analysis (FIA and CFA)

EH/3/2

BS EN ISO 14505-2:2006Ergonomics of the thermal environment.Evaluation of thermal environments in vehicles.Determination of equivalent temperature

PH/9/1

BS EN ISO 14680-1:2006(BS 3900-A26:2006)Paints and varnishes. Determination of pigmentcontent. Centrifuge method

STI/10

BS EN ISO 14680-2:2006(BS 3900-A27:2006)Paints and varnishes. Determination of pigmentcontent. Ashing method

STI/10

BS EN ISO 14680-3:2006(BS 3900-A28:2000)Paints and varnishes. determination of pigmentcontent. Filtration method

STI/10

BS EN ISO 14731:2006Welding coordination. Tasks and responsibilities

WEE/36

BS EN 14884:2005Air quality. Stationary source emissions.Determination of total mercury: automatedmeasuring systems

EH/2/1

BS EN ISO 15138:2007Petroleum and natural gas industries. Offshoreproduction installations. Heating, ventilationand air-conditioning

PSE/17/-/6



BS ISO 8820-6:2007Road vehicles. Fuse-links. Single-bolt fuse-links

AUE/16

BS ISO 8820-7:2007Road vehicles. Fuse-links. Fuse-links with tabs(Type G) with rated voltage of 450 V

AUE/16

BS ISO/IEC 9281-1:1990Information technology. Picture codingmethods. Identification

IST/37

BS ISO/IEC 9281-2:1990Information technology. Picture codingmethods. Procedure for registration

IST/37

BS ISO 10303-11:1994Industrial automation systems and integration.Product data representation and exchange.Description methods: the EXPRESS languagereference manual

AMT/4

BS ISO 10716:1994Paper and board. Determination of alkalireserve

I/-

BS ISO 10754:1996Information and documentation. Extension ofthe Cyrillic alphabet coded character set fornon-slavic languages for bibliographicinformation interchange

IDT/2/7

BS ISO 11056:1999Sensory analysis. Methodology. Magnitudeestimation method

AW/12

BS ISO 11093-9:2006Paper and board. Testing of cores.Determination of flat crush resistance

PAI/11

BS ISO 11108:1996Information and documentation. Archivalpaper. Requirements for permanence anddurability

I/-

BS ISO 11451-3:2007Road vehicles. Vehicle test methods forelectrical disturbances from narrowbandradiated electromagnetic energy. On-boardtransmitter simulation

AUE/16

BS ISO 11452-8:2007Road vehicles. Component test methods forelectrical disturbances from narrowbandradiated electromagnetic energy. Immunity tomagnetic fields

AUE/16

BS ISO 128-23:1999Technical drawings. General principles ofpresentation. Lines on construction drawings

B/555

BS ISO 230-7:2006Test code for machine tools. Geometric accuracyof axes of rotation

MTE/1

BS ISO 3688:1999Pulps. Preparation of laboratory sheets for themeasurement of diffuse blue reflectance factor(ISO brightness)

I/-

BS ISO 4190-5:2006Lift (elevator) installation. Control devices,signals and additional fittings

MHE/4

DD ISO/TS 5658-1:2006Reaction to fire tests. Spread of flame.Guidance on flame spread

FSH/21

BS ISO 6107-2:2006(BS 6068-1.2:2006)Water quality. Vocabulary. Part 2

EH/3


EH/3


EH/3

BS ISO 7176-1:1999Wheelchairs. Determination of static stability

CH/173/1

BS ISO 7176-8:1998Wheelchairs. Requirements and test methodsfor static, impact and fatigue strengths

CH/173/1

BS ISO 7637-3:2007Road vehicles. Electrical disturbances fromconduction and coupling. Electrical transienttransmission by capacitive and inductivecoupling via lines other than supply lines

AUE/16

BS ISO 8587:2006Sensory analysis. Methodology. Ranking

AW/12

BS ISO 8820-5:2007Road vehicles. Fuse-links. Fuse-links with axialterminals (strip fuse-links) types SF 30 and SF 51and test fixtures

AUE/16

BS EN ISO 19904-1:2006Petroleum and natural gas industries. Floatingoffshore structures. Monohulls, semi-submersibles and spars

B/525/12

BS EN ISO 20776-1:2006Clinical laboratory testing and in vitrodiagnostic test systems. Susceptibility testing ofinfectious agents and evaluation ofperformance of antimicrobial susceptibility testdevices. Reference method for testing the invitro activity of antimicrobial agents againstrapidly growing aerobic bacteria involved ininfectious diseases

CH/212

BS EN ISO 21227-3:2007Paints and varnishes. Evaluation of defects oncoated surfaces using optical imaging.Evaluation of delamination and corrosionaround a scribe

STI/10

BS EN ISO 21427-2:2009(BS 6068-5.45:2006)Water quality. Evaluation of genotoxicity bymeasurement of the induction of micronuclei.Mixed population method using the cell lineV79

EH/3/5

BS EN ISO 21952:2007Welding consumables. Wire electrodes, wires,rods and deposits for gas-shielded arc weldingof creep-resisting steel. Classification

WEE/39

BS EN ISO 22032:2009(BS 6068-2.99:2006)Water quality. Determination of selectedpolybrominated diphenyl ethers in sedimentand sewage sludge. Method using extractionand gas chromatography/mass spectrometry

EH/3/2

BS EN ISO 22674:2006Dentistry. Metallic materials for fixed andremovable restorations and appliances

CH/106/2

BS EN ISO 24598:2007Welding consumables. Solid wire electrodes,tubular cored electrodes and electrode/fluxcombinations for submerged arc welding ofcreep-resisting steels. Classification

WEE/39

BS EN 29052-1:1992(ISO 9052-1:1989)Acoustics. Method for the determination ofdynamic stiffness. Materials used under floatingfloors in dwellings

EH/1

BS ISO 128-22:1999Technical drawings. General principles ofpresentation. Basic conventions andapplications for leader lines and reference lines

TDW/4


BS ISO 22472:2006Ships and marine technology. Guidelines for theinstallation and operation of voyage datarecorders (VDR)

EPL/80

BS ISO 23874:2006Natural gas. Gas chromatographic requirementsfor hydrocarbon dewpoint calculation

PTI/15

BS ISO 24497-1:2007Non-destructive testing. Metal magneticmemory. Vocabulary

WEE/46

BS ISO 24497-2:2007Non-destructive testing. Metal magneticmemory. General requirements

WEE/46

BS ISO 24497-3:2007Non-destructive testing. Metal magneticmemory. Inspection of welded joints

WEE/46

DD ISO/TS 24817:2006Petroleum, petrochemical and natural gasindustries. Composite repairs for pipework.Qualification and design, installation, testingand inspection

PSE/17/-/6

BS ISO 28077:2006Photocarcinogenesis action spectrum (non-melanoma skin cancers)

CH/100

BS AU 50-1.6.3a:1995(ISO 6054-1:1994)Tyres and wheels. Tyres. Motorcycle tyres.Specifications for designations, dimensions andload ratings for code designated series(diameter codes 4 to 12) tyres

AUE/4

BS AU 50-4.6.3:1991(ISO 6054-2:1990)Tyres and wheels. Rim profiles and dimensions.Motorcycle rims. Specification for codedesignated series (diameter codes 4 to 12) rims

AUE/4

BS AU 206-2:1986(ISO 7639:1985)Diagnostic systems for road vehicles.Specification for graphical symbols fordiagnostic testers

AUE/16

BS AU 233:1989(ISO 9458:1988)Specification for starter motor electricalconnections for passenger cars

AUE/16

DD ISO/TS 16610-20:2006Geometrical product specifications (GPS).Filtration. Linear profile filters. Basic concepts

TDW/4

DD ISO/TS 16610-22:2006Geometrical product specifications (GPS).Filtration. Linear profile filters. Spline filters

TDW/4

DD ISO/TS 16610-29:2006Geometrical product specifications (GPS).Filtration. Linear profile filters. Spline wavelets

TDW/4

DD ISO/TS 16610-40:2006Geometrical product specifications (GPS).Filtration. Morphological profile filters. Basicconcepts

TDW/4

DD ISO/TS 16610-41:2006Geometrical product specifications (GPS).Filtration. Morphological profile filters. Diskand horizontal line-segment filters

TDW/4

DD ISO/TS 16610-49:2006Geometrical product specifications (GPS).Filtration. Morphological profile filters. Scalespace techniques

TDW/4

BS ISO 16750-3:2007Road vehicles. Environmental conditions andtesting for electrical and electronic equipment.Mechanical loads

AUE/16

BS ISO 16792:2006Technical product documentation. Digitalproduct definition data practices

TDW/4

BS ISO 19072-1:2007Road vehicles. Connection interface forpyrotechnic devices, two-way and three-wayconnections. Pocket interface definition

AUE/16

BS ISO 19072-2:2007Road vehicles. Connection interface forpyrotechnic devices, two-way and three-wayconnections. Test methods and generalperformance requirements

AUE/16

BS ISO 20282-1:2006Ease of operation of everyday products. Designrequirements for context of use and usercharacteristics

PH/9

BS ISO 21849:2006Aircraft and space. Industrial data. Productidentification and traceability

ACE/1

BS ISO 11564:1998Stationary source emissions. Determination ofthe mass concentration of nitrogen oxides.Naphthylethylenediamine photometric method

EH/2/1

BS ISO 11632:1998Stationary source emissions. Determination ofmass concentration of sulfur dioxide. Ionchromatography method

EH/2/1

BS ISO 11898-5:2007Road vehicles. Controller area network (CAN).High-speed medium access unit with low-powermode

AUE/16

BS ISO 13041-5:2006Test conditions for numerically controlledturning machines and turning centres. Accuracyof feeds, speeds and interpolations

MTE/1

BS ISO 13322-2:2006Particle size analysis. Image analysis methods.Dynamic image analysis methods

LBI/37

BS ISO 13542:2006Paper and board. Specification for internaldiameters of cores for reels

PAI/11

BS ISO 13985:2006Liquid hydrogen. Land vehicle fuel tanks

PVE/3/8

BS ISO/IEC TR 14759:1999Software engineering. Mock up and prototype.A categorization of software mock up andprototype models and their use

IST/15

BS ISO 15553:2006Water quality. Isolation and identification ofCryptosporidium oocysts and Giardia cysts fromwater

EH/3/4

BS ISO 15901-2:2006Pore size distribution and porosity of solidmaterials by mercury porosimetry and gasadsorption. Analysis of mesopores andmacropores by gas adsorption

LBI/37

BS ISO 16212:2008Cosmetics. Microbiology. Enumeration of yeastand mould

CW/217

DD ISO/TS 16610-1:2006Geometrical product specifications (GPS).Filtration. Overview and basic concepts

TDW/4



BS EN 13282-3Hydraulic road binder. Conformity evaluation

will supersede DD ENV 13282:2000

B/516/14

BS EN 13624 (Revision)Chemical disinfectants and antiseptics.Quantitative suspension test for the evaluationof fungicidal activity of chemical disinfectantsfor instruments used in the medical area. Testmethod and requirements (phase 2, step 1)

will supersede BS EN 13624:2003

CH/216

PD CEN/TR 13910Packaging. Report on criteria andmethodologies for life cycle analysis ofpackaging

PKW/0/-/1

BS EN 14143 (Revision)Respiratory equipment. Self-contained re-breathing diving apparatus


PH/4/7

BS EN 14362-1 (Revision)Textiles. Methods for the determination ofcertain aromatic amines derived from azocolorants. Detection of the use of certain azocolorants accessible without extraction

will supersede BS EN 14362-1:2003

TCI/80

BS EN 14778-1 (Revision)Solid biofuels. Methods for sampling

will supersede DD CEN/TS 14778-1:2005

PTI/17

BS EN 14780 (Revision)Solid biofuels. Methods for sample preparation

will supersede DD CEN/TS 14780:2005

PTI/17

BS EN 14974:2006/Amendment 1Facilities for users of roller sports equipment.Safety requirements and test methods

SW/136

PD CEN/TR 15404 (Revision)Solid recovered fuels. Methods for thedetermination of ash melting behaviour byusing characteristic temperatures


PTI/17

DD CEN/TS 15405 (Revision)Solid recovered fuels. Methods for thedetermination of the density of pellets andbriquettes


PTI/17

DD CEN/TS 15406 (Revision)Solid recovered fuels. Methods for thedetermination of bridging properties of bulkmaterial


PTI/17

BS EN 30-1-3 (Revision)Domestic cooking appliances burning gas.Safety. Appliances having a glass ceramichotplate

will supersede BS EN 30-1-3:2003

GSE/35

BS EN 30-1-4 (Revision)Domestic cooking appliances burning gas.Safety. Appliances having one or more burnerswith an automatic burner control system


GSE/35

BS EN 545 (Revision)Ductile iron pipes, fittings, accessories and theirjoints for water pipelines. Requirements andtest methods


PSE/10

BS EN ISO 734-2 (Revision)Oilseed meals. Determination of oil content.Rapid extraction method

will supersede BS EN ISO 734-2:2008

AW/307

BS EN 1254-6Copper and copper alloys. Plumbing fittings.Fittings with push-fit ends

NFE/34/3

BS EN 1254-8Copper and copper alloys. Plumbing fittings.Fittings with press ends for multilayer pipes

NFE/34/3

BS EN ISO 3377-1 (Revision)Leather. Physical and mechanical tests.Determination of tear load. Single edge tear


TCI/69

BS EN ISO 3960 (Revision)Animal and vegetable fats and oils.Determination of peroxide value. Iodometric(visual) endpoint determination

will supersede BS EN ISO 3960:2008

AW/307

BS EN ISO 5912 (Revision)Camping tents


TCI/74

BS EN 12620 (Revision)Aggregates for concrete

will supersede BS EN 12620:2002+A1:2008

B/502

BS EN 13041 (Revision)Soil improvers and growing media.Determination of physical properties. Dry bulkdensity, air volume, water volume, shrinkagevalue and total pore space


AW/20

NEW WORK STARTED

The reference number of the committeeresponsible for each item of new workstarted is given after each entry.

Where a work item has the temporarydesignation “BS EN XXXX”, it has not yetbeen allocated a standard number by theEuropean standards body.

BS 434-1 (Revision)Bitumen road emulsions (anionic and cationic).Specification for bitumen road emulsions

will supersede BS 434-1:1984

B/510/19

BS 1134 (Revision)Assessment of surface texture. Guidance formethods and instrumentation and generalguidance

will supersede BS 1134-1:1988 and BS 1134-2:1990

TDW/4

BS 2634-1 (Revision)Roughness comparison specimens. Specificationfor turned, ground, bored, milled, shaped andplaned specimens


TDW/4

BS 2634-2 (Revision)Roughness comparison specimens. Specificationfor spark-eroded, shot-blasted, grit-blasted, andpolished specimens


TDW/4

BS 5837 (Revision)Trees in relation to construction.Recommendations

will supersede BS 5837:2005

B/213

BS 6180 (Revision)Barriers in and about buildings. Code ofpractice


B/208

BS 8417 (Revision)Preservation of timber. Recommendations


B/515

BS 8536Sustainable facility management briefing

FMW/1

BS EN 30-1-2 (Revision)Domestic cooking appliances burning gas.Safety. Appliances having forced-convectionovens and/or grills


GSE/35


BS EN 61124 (Revision)Reliability testing. Compliance tests for constantfailure rate and constant failure intensity


DS/1

BS EN 61300-2-10 (Revision)Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Tests. Crush resistance


GEL/86/2

BS EN 61850-4 (Revision)Communication networks and systems insubstations. System and project management


PEL/57

BS EN 61850-7-410 (Revision)Communication networks and systems forpower utility automation. Hydroelectric powerplants. Communication for monitoring andcontrol


PEL/57

BS EN 61987-11Industrial-process measurement and control.Data structures and elements in processequipment catalogues. List of Properties (LOP)of measuring equipment for electronic dataexchange. Generic structures

AMT/7

BS EN 61988-4-2Plasma display panels. Panel strength measuringmethods

EPL/47

BS EN 62271-4High-voltage switchgear and controlgear. Useand handling of sulphur hexafluoride (SF6)

PEL/17/1

BS EN 62287-1 (Revision)Maritime navigation and radiocommunicationequipment and systems. Class B shipborneequipment of the automatic identificationsystem (AIS). Carrier-sense time division multipleaccess (CSTDMA) techniques


EPL/80

BS EN 62341-5-2Organic Light Emitting Diode (OLED) displays.Mechanical endurance test methods

EPL/47

BS EN 62343Dynamic modules and devices. General andguidance

GEL/86/3

BS EN 62629Measuring methods for 3D displays

EPL/47

BS EN 16058Influence of metallic materials on waterintended for human consumption. Dynamic rigtest for assessment of nickel release fromnickel-chrome or nickel plated products

EH/6

BS EN ISO 19101 (Revision)Geographic information. Reference model


IST/36

BS EN ISO 27107 (Revision)Animal and vegetable fats and oils.Determination of peroxide value.Potentiometric end-point determination


AW/307

BS EN 60061-1:1997/Amendment 45Specification for lamp caps and holderstogether with gauges for the control ofinterchangeability and safety. Lamps caps

CPL/34/2

BS EN 60061-2:1997/Amendment 42Specification for lamp caps and holderstogether with gauges for the control ofinterchangeability and safety. Lampholders

CPL/34/2

BS EN 60061-3:1997/Amendment 43Lamps caps and holders together with gaugesfor the control of interchangeability and safety.Gauges

CPL/34/2

BS EN 60296 (Revision)Fluids for electrotechnical applications. Unusedmineral insulating oils for transformers andswitchgear


GEL/10

BS EN 60350 (Revision)Electric cooking ranges, hobs, ovens and grillsfor household use. Methods for measuringperformance

will supersede BS EN 50304:2009,BS EN 60350:2009

CPL/59

BS EN 60475Method of sampling liquid dielectrics

GEL/10

BS EN 60567 (Revision)Oil-filled electrical equipment. Sampling ofgases and of oil for analysis of free anddissolved gases. Guidance


GEL/10

BS EN 60704-2-14Household and similar electrical appliances. Testcode for the determination of airborneacoustical noise. Particular requirements forrefrigerators, frozen-food storage cabinets andfood freezers

CPL/59/13

BS EN 15410 (Revision)Solid recovered fuels. Method for thedetermination of the content of major elements(Al, Ca, Fe, K, Mg, Na, P, Si, Ti)


PTI/17

BS EN 15411 (Revision)Solid recovered fuels. Methods for thedetermination of the content of trace elements(As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb,Sb, Se, Tl, V and Zn)


PTI/17

BS EN 15413 (Revision)Solid recovered fuels. Methods for thepreparation of the test sample from thelaboratory sample


PTI/17

DD CEN/TS 15480-3Identification card systems. European CitizenCard. European Citizen Card Interoperabilityusing an application interface

IST/17

DD CEN/TS 15639 (Revision)Solid recovered fuels. Methods for thedetermination of mechanical durability ofpellets


PTI/17

BS EN 16051-1Inflation devices and accessories for inflatableconsumer products. Compatibility of valves andvalve adapters

SW/136

BS EN 16051-2Inflation devices and accessories for inflatableconsumer products. Safety requirements,durability, performance, compatibility and testmethods of inflators

SW/136

BS EN 16054BMX bicycles. Safety requirements and testmethods

GME/25

BS EN 16055Leather. Raw cattle hides and calf skins.Description, presentation, preservation

TCI/69

BS EN 16056Influence of metallic materials on waterintended for human consumption. Method toevaluate the passivity of stainless steel

EH/6

BS EN 16057Influence of metallic materials on waterintended for human consumption. Method todetermine the amount of lead on the surface ofcopper alloys

EH/6

New Work Started continued...


PD ISO/TR 7074Performance requirements for plastics pipes andfittings for use in underground drainage andsewage

PRI/88/1

BS ISO 7752-2Lifting appliances. Controls. Layout andcharacteristics. Basic arrangement andrequirements for mobile cranes

MHE/3/5

BS ISO 8013 (Revision)Rubber, vulcanized. Determination of creep incompression or shear

will supersede BS ISO 8013:2006

PRI/22

BS ISO 8332 (Revision)Rubber compounding ingredients. Sulfur.Methods of test


PRI/23

BS ISO 8784-2Pulp, paper and board. Microbiologicalexamination. Surface method for enumerationof yeasts and molds

PAI/11

BS ISO 9772 (Revision)Cellular plastics. Determination of horizontalburning characteristics of small specimenssubjected to a small flame


PRI/26

BS ISO 9773 (Revision)Plastics. Determination of burning behaviour ofthin flexible vertical specimens in contact with asmall-flame ignition source


PRI/26

BS ISO 10303-239Industrial automation systems and integration.Product data representation and exchange.Application protocol. Product lifecycle support

AMT/4

BS ISO 10360-8Geometrical Product Specifications (GPS).Acceptance and reverification tests forcoordinate measuring machines (CMM). CMMswith optical distance sensors

TDW/4

BS ISO 10360-9Geometrical Product Specifications (GPS).Acceptance and reverification tests forcoordinate measuring machines (CMM). CMMswith multiple probing systems

TDW/4

BS ISO 10502Aerospace. Hose assemblies inpolytetrafluoroethylene (PTFE) for use up to232ºC and 10500 kPa. Procurement specification

ACE/69

BS ISO 2782-2Rubber, vulcanized or thermoplastic.Determination of permeability to gases. Carriergas method

PRI/22

BS ISO 2951Vulcanized rubber. Determination of insulationresistance

PRI/22

BS ISO 3387Rubber. Determination of crystallization effectsby hardness measurements

will supersede BS 903-A63:1995

PRI/22

BS ISO 4652Rubber compounding ingredients. Carbonblack. Determination of specific surface area bynitrogen adsorption methods. Single-pointprocedures

will partially supersede BS 5293-11:1995

PRI/23

BS ISO 4658 (Revision)Acrylonitrile-butadiene rubber (NBR).Evaluation procedure


PRI/23

BS ISO 5636-3Paper and board. Determination of airpermeance (medium range). Bendtsen method


PAI/11

BS ISO 5660-3Reaction-to-fire tests. Heat release, smokeproduction and mass loss rate. Guidance onmeasurement

FSH/21/5

BS ISO 5660-5Reaction-to-fire tests. Heat release, smokeproduction and mass loss rate. Heat release(cone calorimeter method) and smokeproduction rate (dynamic measurement)

FSH/21

BS ISO 6341 (Revision)Water quality. Determination of the inhibitionof the mobility of Daphnia magna Straus(Cladocera, Crustacea). Acute toxicity test


EH/3/5

BS ISO 6533 (Revision)Forestry machinery. Portable chain-saw fronthand-guard. Dimensions and clearances


AGE/29

BS ISO 6808 (Revision)Plastics hoses and hose assemblies for suctionand low-pressure discharge of petroleumliquids. Specification


PRI/66

BS EN 62642-2-2Alarm systems. Intrusion and hold-up systems.Intrusion detectors. Passive infra red detectors

GW/1

BS EN 62642-3Alarm systems. Intrusion and hold-up systems.Control and indicating equipment

GW/1

BS EN 62642-4Alarm systems. Intrusion and hold-up systems.Warning devices

GW/1

BS EN 62642-5-3Alarm systems. Intrusion and hold-up systems.Requirements for interconnections equipmentusing radio frequency techniques

GW/1

PD ISO/TR 230-8:2009/Amendment 1Test code for machine tools. Determination ofvibration levels

MTE/1/2

BS ISO 812 (Revision)Rubber, vulcanized or thermoplastic.Determination of low-temperature brittleness


PRI/22

PD ISO/TR 945-2Microstructure of cast irons. Graphiteclassification by image analysis

ISE/35

BS ISO 1183-1 (Revision)Plastics. Methods for determining the density ofnon-cellular plastics. Immersion method, liquidpyknometer method and titration method


PRI/21

BS ISO 1431-1 (Revision)Rubber, vulcanized or thermoplastic. Resistanceto ozone cracking. Static and dynamic straintesting

will supersede BS ISO 1431-1:2004

PRI/22

BS ISO 1432Physical testing of rubber. Method fordetermination of stiffness at low temperature(Gehman test)

will supersede BS 903-A13:1990

PRI/22

BS ISO 2475 (Revision)Chloroprene rubber (CR). General-purposetypes. Evaluation procedure


PRI/23

BS ISO 2782-1Rubber, vulcanized or thermoplastic.Determination of permeability to gases.Manometric methods

PRI/22


BS ISO 13742Ships and marine technology. Ship’s mooringand towing fittings. Universal fairleads withoutupper roller

SME/32/-/4

BS ISO 13755Ships and marine technology. Ship’s mooringand towing fittings. Steel rollers

SME/32/-/4

BS ISO 13767Ships and marine technology. Ship’s mooringand towing fittings. Shipside roller fairleads

SME/32/-/4

BS ISO 13776Ships and marine technology. Ship’s mooringand towing fittings. Pedestal fairleads

SME/32/-/4

BS ISO 13784-1Reaction-to-fire tests for sandwich panelbuilding systems. Test method for small rooms

FSH/21

BS ISO 13795Ships and marine technology. Ship’s mooringand towing fittings. Welded steel bollards forsea-going vessels

SME/32/-/4

BS ISO 13797Ships and marine technology. Ship’s mooringand towing fittings. Cruciform bollards

SME/32/-/4

BS ISO 13798Ships and marine technology. Ship’s mooringand towing fittings. Recessed bitts (steel platetype)

SME/32/-/4

BS ISO 13799Ships and marine technology. Ship’s mooringand towing fittings. Recessed bitts (castingtype)

SME/32/-/4

DD ISO/TS 14198Road vehicles. Ergonomic aspects of transportinformation and control systems. Calibrationtasks for methods which assess driver demanddue to the use of in-vehicle systems

AUE/12

BS ISO 14230-1Road vehicles. Diagnostic systems. Keywordprotocol 2000. Physical layer

AUE/16

BS ISO 14230-2Road vehicles. Diagnostic systems. Keywordprotocol 2000. Data link layer

AUE/16

BS ISO 13209-3Road vehicles. Open test sequence exchangeformat (OTX). Standard extensions andrequirements

AUE/16

BS ISO 13400-1Road vehicles. Diagnostic communicationbetween test equipment and vehicle overinternet protocol. General information and use-case definition

AUE/16

BS ISO 13400-2Road vehicles. Diagnostic communicationbetween test equipment and vehicle overinternet protocol. Network and transport layerrequirements and services

AUE/16

BS ISO 13400-3Road vehicles. Diagnostic communicationbetween test equipment and vehicle overinternet protocol. IEEE 802.3 based wiredvehicle interface

AUE/16

BS ISO 13470Trenchless applications of ductile iron pipessystems

PSE/10

BS ISO 13482Robots and robotic devices. Safetyrequirements. Non-medical personal care robot

AMT/4

BS ISO 13507Rubber compounds. Short names for propertiesreported in certificates of analysis

PRI/10

BS ISO 13613Ships and marine technology. Critical systemsfor propulsion and manueverability.Maintenance and testing guidelines

SME/32/-/3

BS ISO 13713Ships and marine technology. Ship’s mooringand towing fittings. Mooring chocks

SME/32/-/4

BS ISO 13728Ships and marine technology. Ship’s mooringand towing fittings. Panama chocks

SME/32/-/4

BS ISO 13729Ships and marine technology. Ship’s mooringand towing fittings. Closed chocks

SME/32/-/4

BS ISO 13733Ships and marine technology. Ship’s mooringand towing fittings. Universal fairleads withupper roller

SME/32/-/4

BS ISO 10819 (Revision)Mechanical vibration and shock. Hand-armvibration. Method for the measurement andevaluation of the vibration transmissibility ofgloves at the palm of the hand


GME/21/6

BS ISO 10966 (Revision)Sports and recreational equipment. Fabrics forawnings and camping tents. Specification


TCI/74

BS ISO 10993-3 (Revision)Biological evaluation of medical devices. Testsfor genotoxicity, carcinogenicity andreproductive toxicity


CH/194

BS ISO 11425 (Revision)Rubber hoses and hose assemblies forautomobile power-steering systems.Specification


PRI/66

BS ISO 12122Timber structures. Timber. Evaluation ofcharacteristic values for structural timber

B/518

BS ISO/IEC 12785-2Information technology for learning, education,and training. Content packaging. XML binding

IST/43

BS ISO/IEC 12785-3Information technology for learning, education,and training. Content packaging. Best practiceand implementation guide

IST/43

BS ISO 13073-1Ships and marine technology. Risk assessmenton anti-fouling systems on ships. Marineenvironmental risk assessment method onactive substances used for anti-fouling systemson ships

SME/32/-/2

BS ISO 13088Gas cylinders. Filling conditions and fillinginspection of acetylene cylinder bundles

PVE/3/7

BS ISO 13137Workplace atmospheres. Personal samplingpumps. Requirements and test methods

EH/2/2

BS ISO 13179-1Implants for surgery. Titanium plasma sprayedcoatings. General requirements

CH/150/1



BS ISO 18898 (Revision)Rubber. Calibration and verification of hardnesstesters


PRI/22

BS ISO 18934 (Revision)Imaging materials. Multiple media archives.Storage environment


CPW/42

BS ISO 19701 (Revision)Methods for sampling and analysis of fireeffluents


FSH/16

BS ISO 19702Toxicity testing of fire effluents. Guidance foranalysis of gases and vapours in fire effluentsusing FTIR gas analysis

FSH/16

DD ISO/TS 19713-1Road vehicles. Inlet air cleaning equipment forinternal combustion engines and compressors.Fractional efficiency testing with fine particles(0, 3 m to 5 m optical diameter)

GSE/40

DD ISO/TS 19713-2Road vehicles. Inlet air cleaning equipment forinternal combustion engines and compressors.Fractional efficiency testing with coarseparticles (5 m to 40 m optical diameter)

GSE/40

BS ISO/IEC 19788-3Information technology for learning, educationand training. Metadata for learning resources.MLR basic application profile

IST/37

BS ISO 19980 (Revision)Ophthalmic instruments. Corneal topograpers


CH/172/6

BS ISO 20462-3 (Revision)Photography. Psychophysical experimentalmethods for estimating image quality. Qualityruler method


CPW/42

BS ISO 23274-2Hybrid-electric road vehicles. Exhaust emissionsand fuel consumption measurements

GSE/40

BS ISO 25178-1Geometrical product specifications (GPS).Surface texture. Areal. Indication of surfacetexture

TDW/4

BS ISO 14451-8Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for igniters

AUE/7

BS ISO 14451-9Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for actuators

AUE/7

BS ISO 14451-10Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for semi finishedassemblies

AUE/7

BS ISO 14452Network services billing

SVS/7/4

BS ISO 14477Vegetable fats and oils. Determination oftriacylglycerols. Method by high performanceliquid chromatography (HPLC)

AW/307

BS ISO 14538Road vehicles. Conditions for testing theelectrical and electronic equipments. Functionalperformance status classification (FPSC)

GSE/40

BS ISO 14934-3Fire tests. Calibration and use of heat fluxmeters. Secondary calibration method

FSH/21

BS ISO 14990-1Earth-moving machinery. Safety of electric driveand hybrid electronic components and systems.General requirements

B/513/1

PD ISO/TR 15144-1Calculation of micro-pitting load capacity ofcylindrical spur and helical gears. Introductionand basic principles

MCE/5/-/15

BS ISO 15202-2 (Revision)Workplace air. Determination of metals andmetalloids in airborne particulate matter byinductively coupled plasma atomic emissionspectrometry. Sample preparation


EH/2/2

BS ISO 15494 (Revision)Plastics piping systems for industrialapplications. Polybutene (PB), polyethylene (PE)and polypropylene (PP). Specifications forcomponents and the system. Metric series


PRI/88/2

BS ISO 15928-5Houses. Description of performance. Energyefficiency

CB/500

BS ISO 14285Rubber and plastics gloves for the food industryand food services. Specification

CH/205/3

BS ISO 14309Rubber, vulcanized or thermoplastic. Electricalresistivity. Determination of volume and/orsurface resistivity

PRI/22

BS ISO 14371Water quality. Determination of fresh watersediment chronic toxicity to Heterocyprisincongruens (Crustacea, Ostracoda)

EH/3/5

BS ISO 14380Water quality. Determination of the acutetoxicity to Thamnocephalus platyrus (Crustacea,Anostraca) at sublethal and lethal level

EH/3/5

BS ISO 14382Workplace atmospheres. Determination oftoluene diisocyanate vapors using 1-(2-pyridyl)piperazine-coated glass fiber filters andanalysis by high performance liquidchromatography with ultraviolet andfluorescent detectors

EH/2/2

BS ISO 14451-1Pyrotechnic articles. Pyrotechnic articles forvehicles. Terminology

AUE/7

BS ISO 14451-2Pyrotechnic articles. Pyrotechnic articles forvehicles. Test methods

AUE/7

BS ISO 14451-3Pyrotechnic articles. Pyrotechnic articles forvehicles. Labelling

AUE/7

BS ISO 14451-4Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for micro gas generators

AUE/7

BS ISO 14451-5Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for airbag gasgenerators

AUE/7

BS ISO 14451-6Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for airbag modules

AUE/7

BS ISO 14451-7Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for seatbeltpretensioners

AUE/7


09/30196573 DCBS 8530 Traditional-style half round, beadedhalf round, Victorian ogee and moulded ogeealuminium rainwater systems. Specification

B/542/6

09/30202852 DCBS 5733 General requirements for electricalaccessories. Specification

PEL/23

09/30205734 DCBS 5864 Installation and maintenance of gas-fired ducted air heaters of rated heat input notexceeding 70 kW net (2nd and 3rd familygases). Specification

GSE/30/-/7

09/30214218 DCPD 5500 AMD2 Specificartion for unfiredfusion welded pressure vessels

PVE/1

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –ADOPTIONS

All Draft British Standards are availablefrom BSI Customer Services (see ’How toorder’ on page 2)

Most drafts are charged at£10.00 to members and£20.00 to non-members.

Larger draft documents are charged at ahigher price according to the number ofpages and are priced individually below.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL by 28 February, 2010 unlessotherwise stated, to be considered by therelevant BSI committee.

Draft standards may be modified beforeadoption and issue as British Standards.

09/30100834 DCBS ISO/IEC 19788-1 Information technology.Learning, education and training. Metadata forlearning resources. Part 1. Framework

IST/43

09/30150663 DCBS ISO 22734-2 Hydrogen generators usingwater electrolysis process. Part 2. Residentialapplications

PVE/3/8

Comments for the above document are required by15 February, 2010

09/30154552 DCBS ISO 23228 Thermoplastics pipes for theconveyance of fluids. Determination of thestress-rupture resistance of pipe resin materialsusing plain strain tensile (PSGT) specimens

PRI/88/4

BS 3A 110Specification for steel nuts (Unified hexagonsand Unified threads) for shear bolts for aircraft

will supersede BS 2A 110:1962

ACE/12

BS A260 to A265Specification for metric screws

will supersede BS A 260; A 261 [...]:1976

ACE/12

BS XXXXCopper and copper alloys. Plumbing fittings.Fittings with press ends for metallic tubes

NFE/34/3

PAS XXPrint services benchmarking

PAS XXXGuidance on cell therapy

PAS XXXXGuidance on biometrics

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –NATIONAL BRITISHSTANDARDS

You may now comment on any NationalBritish Standard online. BSI BritishStandards has launched a Draft Reviewsystem which allows access to the draftsof all National British Standards. Toenhance access of Drafts for PublicComment for the wider community, makecomments more visible and move intocollaborative working practices, you willnow be able to comment on any NationalBritish Standard by visitinghttp://www.bsigroup.com/drafts. Allyou need to do is register. This service isfree of charge.

Please note that the only standardsavailable on this service are pure BritishStandards (National Standards e.g:BS XXXX). European and internationaldocuments are not included at this time.

Deadlines for receipt of comments oneach of the individual drafts can be foundat http://www.bsigroup.com/drafts.The deadline for the following drafts is28 February, 2010 unless otherwisestated.

Should you wish to receive these drafts inhard copy format, they are available for afee from BSI Customer Services (see ’Howto order’ on page 2).

09/30170006 DCBS 6079-1 Project management. Part 1.Principles and guidelines for the managementof projects

MS/2

BS ISO/IEC 27034-2Information technology. Security techniques.Application security. Organization normativeframework

IST/33

BS ISO/IEC 27034-3Information technology. Security techniques.Application security. Application securitymanagement

IST/33

BS ISO/IEC 27034-4Information technology. Security techniques.Application security. Application securityvalidation

IST/33

BS ISO/IEC 27034-5Information technology. Security techniques.Application security. Protocols and applicationsecurity controls data structure

IST/33

BS ISO 27145-5Road vehicles. Implementation of WWH-OBDcommunication. Conformance test

AUE/16

BS ISO 27145-6Road vehicles. Implementation of WWH-OBDcommunication. External test equipment

AUE/16

BS ISO 27871Cheese and processed cheese. Determination ofnitrogen fractions

AW/5

BS ISO 28017Rubber hoses and hose assemblies, wire ortextile reinforced, for dredging applications.Specification

PRI/66

BS ISO 29904Fire chemistry. Aerosols generation andmeasurement in fire

FSH/16

PD IEC/TR 61000-1-6Electromagnetic compatibility (EMC). General.Guide to the assessment of measurementuncertainty

GEL/210/12

DD IEC/TS 62657Industrial communication networks. Wirelesscommunication network and communicationprofiles. Coexistence

AMT/7

PD 0024 (Revision)Archival documents. Guide to the interpretationof BS 5454:2000. Storage and exhibition ofarchival documents

will supersede PD 0024:2001

IDT/2/9



09/30182882 DCBS ISO 29463-5 High-efficiency filters and filtermedia for removing particles from air. Part 5.Test method for determining the efficiency offilter elements

MCE/21

09/30185799 DCBS EN ISO 11354-1 Advanced automationtechnologies and their applications. Part 1.Framework for enterprise interoperability

AMT/5

09/30185894 DCBS EN 1344 Clay pavers. Requirements and testmethods

B/507

09/30189435 DCBS ISO 10878 Non-destructive testing. Infraredthermography. Vocabulary

WEE/46

09/30191421 DCBS EN 61169-35 Radio-frequency connectors.Part 35. Sectional specification for 2.92 seriesR.F. coaxial connectors

EPL/46/2

09/30193524 DCBS EN 62222 Fire performance ofcommunication cables installed in buildings.Update new methods of fire retardancy

EPL/46


09/30193710 DCBS EN 16018 Non-destructive testing.Terminology. Terms used in ultrasonic testingwith phased arrays

WEE/46

09/30194820 DCBS EN 60731 Medical electrical equipment.Dosimeters with ionization chambers as used inradiotherapy

CH/62/3

09/30195921 DCBS ISO 11057 Air quality. Test method forfiltration characterisation of cleanable filtermedia

EH/2/1

09/30196316 DCBS ISO 6361-1 Wrought aluminium andaluminium alloys. Sheets, strips and plates. Part 1. Technical conditions for inspection anddelivery

NFE/35

09/30196319 DCBS ISO 6361-2 Wrought aluminium andaluminium alloys. Sheets, strips and plates. Part 2. Mechanical properties

NFE/35

09/30180789 DCBS EN 16016-1 Non destructive testing.Radiation method. Computed tomography. Part 1. Terminology

WEE/46

09/30180795 DCBS EN 16016-2 Non destructive testing.Radiation method. Computed tomography. Part 2. Principle, equipment and samples

WEE/46

09/30180799 DCBS EN 16016-3 Non destructive testing.Radiation method. Computed tomography. Part 3. Operation and interpretation

WEE/46

09/30180804 DCBS EN 16016-4 Non destructive testing.Radiation method. Computed tomography. Part 4. Qualification

WEE/46

09/30181286 DCBS ISO IEC 24727-5 Identification cards.Integrated circuit cards programming interface.Part 5. Testing procedures£85.00 members, £170.00 non-members

IST/17

09/30182350 DCBS EN 12757-1 AMD1 Mixing machinery forcoating materials. Safety requirements. Part 1.Mixing machinery for use in vehicle refinishing

MCE/3/8

09/30182356 DCBS EN 12581 AMD1 Coating plants. Machineryfor dip coating and electrodeposition of organicliquid coating material. Safety requirements

MCE/3/8

09/30182865 DCBS ISO 29463-1 High-efficiency filters and filtermedia for removing particles from air. Part 1.Classification, performance testing and marking

MCE/21

09/30182868 DCBS ISO 29463-2 High-efficiency filters and filtermedia for removing particles from air. Part 2.Aerosol production, measuring equipment andparticle-counting statistics

MCE/21

09/30182871 DCBS ISO 29463-3 High-efficiency filters and filtermedia for removing particles from air. Part 3.Test method for flat sheet filter media

MCE/21

09/30182875 DCBS ISO 29463-4 High-efficiency filters and filtermedia for removing particles from air. Part 4.Test method for determining the leakage offilter elements (scan method)

MCE/21

09/30155614 DCBS ISO 15698-1 Steel for the reinforcement ofconcrete. Headed bars. Part 1. Requirements

ISE/9/1

09/30155621 DCBS ISO 15698-2 Steel for the reinforcement ofconcrete. Headed bars. Part 2. Test methods

ISE/9/1

09/30165649 DCBS ISO 25964-1 Information anddocumentation. Thesauri and interoperabilitywith other vocabularies. Part 1. Thesauri forinformation retrieval£18.00 members, £36.00 non-members

IDT/2/2

Comments on this draft should be submitted by 28 February, 2010 athttp://www.bsigroup.com/drafts

09/30166263 DCBS IEC 60364-5-55 AMD3 Low-voltageelectrical installations. Part 5-55. Selection anderection of electrical equipment. Otherequipment

JPEL/64

Comments for the above document are required by31 January, 2010

09/30168805 DCBS EN ISO 3107 Dentistry. Zinc oxide/eugenolcements and zinc oxide/noneugenol cements

CH/106/1

09/30170207 DCBS ISO/IEC 24787 Information technology.Identification cards. On-card biometriccomparison

IST/17

09/30170496 DCBS EN 60601-2-45 Medical electricalequipment. Part 2-45. Particular requirementsfor basic safety and essential performance ofmammographic X-ray equipment andmammographic stereotactic devices

CH/62/2

09/30173981 DCBS EN 60662 High-pressure sodium vapourlamps. Performance specifications£18.00 members, £36.00 non-members

CPL/34/1

09/30179632 DCBS EN ISO 12312-1 Eye and face protection.Sunglasses and related eyewear. Part 1.Sunglasses for general use

PH/2


09/30180290 DCBS EN 1247 AMD1 Foundry machinery. Safetyrequirements for ladles, pouring equipment,centrifugal casting machines, continuous andsemi continuous casting machines

MCE/3/10


09/30203792 DCBS ISO 7010 Graphical symbols. Safety coloursand safety signs. Registered safety signs£18.00 members, £36.00 non-members

PH/8/1

09/30203860 DCBS EN 14139 Ophthalmic optics. Specificationsfor ready-to-wear spectacles

CH/172/3

09/30204392 DCBS ISO 12958 Geotextiles and geotextile-related products. Determination of water flowcapacity in their plane

B/553


09/30204691 DCBS ISO/IEC 26512 Software and systemsengineering. Requirements for acquirers andsuppliers of user documentation

IST/15


09/30204817 DCBS EN 1888 Child care articles. Wheeled childconveyances. Safety requirements and testmethods

CW/1/2

09/30204931 DCBS ISO/IEC 24800-2 Information technology.JPSearch. Part 2. Registration, identification andmanagement of schema and ontology

IST/37

09/30205279 DCBS ISO/IEC 29199-3 Information technology.JPEG XR image coding system. Part 3. MotionJPEG XR

IST/37

09/30206295 DCBS EN 16010 Plastics. Recycled plastics.Sampling procedures for testing plastics wasteand recyclates

PRI/89

09/30206298 DCBS EN 16011 Plastics. Recycled plastics. Samplepreparation

PRI/89

09/30207703 DCBS ISO/IEC 10918-5 Information technology.Digital compression and coding of continuous-tone still images. JPEG File Interchange Format(JFIF)

IST/37

09/30207815 DCBS EN 15599-1 Thermal insulation products forbuilding equipment and industrial installations.In-situ thermal insulation formed fromexpanded perlite (EP) products. Part 1.Specification for bonded and loose-fill productsbefore installation

PRI/72

09/30197681 DCBS ISO 10159 Health informatics. Messages andcommunication. Web access reference manifest

IST/35

09/30201352 DCBS ISO 7626-1 Vibration and shock.Experimental determination of mechanicalmobility. Part 1. Basic definitions andtransducers

GME/21


09/30201367 DCBS ISO 5264-2 Pulps. Laboratory beating. Part 2. PFI mill method

PAI/11

09/30202122 DCBS ISO 12863 Standard test method formeasuring the ignition propensity of cigarettes

FSH/21

09/30202130 DCBS ISO 13059 Round timber. Requirements forthe measurement of dimensions and methodsfor the determination of volume

B/543

09/30202602 DCBS EN 50134-3 Alarm systems. Social alarmsystems. Part 3. Local unit and controller

GW/1/12

Comments for the above document are required by19 March, 2010

09/30202766 DCBS ISO/IEC 24791-2 Information technology.Radio Frequency Identification (RFID) for itemmanagement. Software system infrastructure.Part 2. Data management

IST/34

09/30202768 DCBS ISO/IEC 24791-3 Information technology.Radio Frequency Identification (RFID) for itemmanagement. Software system infrastructure.Part 3. Device management

IST/34

09/30203242 DCBS ISO 7380-1 Hexagon socket button headscrews. Part 1. Button head (head shape A)

FME/9/3

09/30203245 DCBS ISO 7380-2 Hexagon socket button headscrews. Part 2. Button head with collar (headshape B)

FME/9/3

09/30203413 DCBS ISO/IEC 23000-11 AMD1 Informationtechnology. Multimedia application format(MPEG-A). Part 11. Stereoscopic videoapplication format

IST/37


09/30196322 DCBS ISO 6361-3 Wrought aluminium andaluminium alloys. Sheets, strips and plates. Part 3. Strips. Tolerances on shape anddimensions

NFE/35

09/30196325 DCBS ISO 6361-4 Wrought aluminium andaluminium alloys. Sheets, strips and plates. Part 4. Sheets and plates. Tolerances on shapeand dimensions

NFE/35

09/30196463 DCBS EN 61169-14 Radio-frequency connectors.Part 14. R.F. coaxial connectors with innerdiameter of outer conductor 12 mm with screwcoupling. Characteristic impedance 75 ohms(Type 3. 5/12)

EPL/46/2

09/30196808 DCBS ISO 11806-1 Agricultural and forestrymachinery. Safety requirements and testing forportable, hand-held, powered brush-cutters andgrass-trimmers. Part 1. Machines with integralcombustion engine

AGE/29

09/30196811 DCBS ISO 11680-1 Machinery for forestry. Safetyrequirements and testing for pole-mountedpowered pruners. Part 1. Machines fitted withan integral combustion engine

AGE/29

09/30196814 DCBS ISO 11680-2 Machinery for forestry. Safetyrequirements and testing for pole-mountedpowered pruners. Part 2. Machines for use withback-pack power source

AGE/29

09/30197343 DCBS ISO 4126-1 Safety devices for protectionagainst excessive pressure. Part 1. Safety valves

PSE/18/6


09/30197346 DCBS ISO 4126-4 Safety devices for protectionagainst excessive pressure. Part 4. Pilot-operated safety valves

PSE/18/6


09/30197353 DCBS ISO 4126-7 Safety devices for protectionagainst excessive pressure. Part 7. Common data

PSE/18/6


09/30197477 DCBS ISO 11287 Green tea. Definition and basicrequirements

AW/8


Draft British Standards for Public Comment continued...


09/30209043 DCBS EN 13922 Tanks for transport of dangerousgoods. Service equipment for tanks. Overfillprevention systems for liquid fuels

AUE/18


09/30209158 DCBS EN ISO 14245 Gas cylinders. Specificationsand testing of LPG cylinder valves. Self-closing

PVE/19

09/30209161 DCBS EN ISO 15995 Gas cylinders. Specificationsand testing of LPG cylinder valves. Manuallyoperated

PVE/19

09/30209360 DCBS EN 16014 Hardware for furniture. Strengthand durability of locking mechanism

FW/0/2


09/30209374 DCBS EN 15969-2 Tanks for transport ofdangerous goods. Digital interface for the datatransfer between tank vehicle and withstationary facilities. Part 2. Commercial andlogistic data

AUE/18


09/30209443 DCBS EN 15876-2 Electronic fee collection.Conformity evaluation of on-board unit androadside equipment to EN 15509. Part 2.Abstract test suite

EPL/278

09/30209524 DCBS EN 16019 Railway applications. Automaticcoupler. Performance requirements, specificinterface geometry and test method

RAE/1/-/13

09/30209615 DCBS ISO 5149-1 Refrigerating systems and heatpumps. Safety and environmental requirements.Part 1. Definitions, classification and selectioncriteria

RHE/18

09/30209618 DCBS ISO 5149-2 Refrigerating systems and heatpumps. Safety and environmental requirements.Part 2. Design, construction, testing, markingand documentation

RHE/18

09/30209621 DCBS ISO 5149-3 Refrigerating systems and heatpumps. Safety and environmental requirements.Part 3. Installation site

RHE/18

09/30208245 DCBS ISO 7051 Cross recessed raised countersunk(oval) head tapping screws

FME/9/3

09/30208248 DCBS ISO 7053 Hexagon washer head tappingscrews

FME/9/3

09/30208460 DCBS EN 15727 Ventilation for buildings. Ductsand ductwork components, leakageclassification and testing

RHE/2


09/30208473 DCBS EN 843-7 Advanced technical ceramics.Mechanical properties of monolithic ceramics atroom temperature. Part 7. C-ring tests

RPI/13

09/30208476 DCBS EN 843-8 Advanced technical ceramics.Mechanical properties of monolithic ceramics atroom temperature. Part 8. Guidelines forconducting proof tests

RPI/13

09/30208500 DCBS EN 58 Bitumen and bituminous binder.Sampling bituminous binders

PTI/13

09/30208703 DCBS ISO 22262-1 Air quality. Bulk materials. Part 1. Sampling and qualitative determinationof asbestos in commercial bulk materials

EH/2/3

09/30208725 DCBS EN 13037 Soil improvers and growingmedia. Determination of pH

AW/20


09/30208728 DCBS EN 13038 Soil improvers and growingmedia. Determination of electrical conductivity

AW/20


09/30208731 DCBS EN 13039 Soil improvers and growingmedia. Determination of organic content andash

AW/20


09/30208807 DC BS EN 13803-1 Railway applications. Track.Track alignment design parameters. Trackgauges 1435 mm and wider. Part 1. Plain line

RAE/2

09/30207822 DCBS EN 15600-1 Thermal insulation products forbuilding equipment and industrial installations.In-situ thermal insulation formed fromexfoliated vermiculite (EV) products. Part 1.Specification for bonded and loose-fill productsbefore installation

PRI/72

09/30207859 DCBS EN 16002 Flexible sheets for waterproofing.Determination of the resistance to wind load ofmechanically fastened flexible sheets for roofwaterproofing

B/546


09/30207865 DCBS EN 13859-1 Flexible sheets forwaterproofing. Definitions and characteristicsof underlays. Part 1. Underlays fordiscontinuous roofing

B/546/5

09/30207868 DCBS EN 13859-2 Flexible sheets forwaterproofing. Definitions and characteristicsof underlays. Part 2. Underlays for walls

B/546/5

09/30208217 DCBS ISO 1207 Slotted cheese head screws.Product grade A

FME/9/3

09/30208224 DCBS ISO 1481 Slotted pan head tapping screws

FME/9/3

09/30208227 DCBS ISO 1482 Slotted countersunk (flat) headtapping screws

FME/9/3

09/30208230 DCBS ISO 1483 Slotted raised countersunk (oval)head tapping screws

FME/9/3

09/30208233 DCBS ISO 2702 Heat-treated steel tapping screws.Mechanical properties

FME/9/3

09/30208236 DCBS ISO 4766 Slotted set screws with flat point

FME/9/3

09/30208239 DCBS ISO 7049 Cross recessed pan head tappingscrews

FME/9/3

09/30208242 DCBS ISO 7050 Cross recessed countersunk (flat)head tapping screws

FME/9/3


09/30212950 DCBS EN 62271-100 AMD1 High-voltageswitchgear and controlgear. Part 100.Alternating current circuit-breakers

PEL/14


09/30212954 DCBS EN 61951-1 Secondary cells and batteriescontaining alkaline or other non-acidelectrolytes. Portable sealed rechargeable singlecells. Part 1. Nickel-cadmium

PEL/21/1


09/30213143 DCBS ISO/IEC 14496-1 AMD1 Informationtechnology. Coding of audio-visual objects. Part1. Systems

IST/37


09/30213156 DCBS EN 62496-2-2 Optical circuit boards. Testand measurement procedures. Part 2-2.Measurements. Dimensions of optical circuitboards

GEL/86

09/30213269 DCBS EN 62271-4 High-voltage switchgear andcontrolgear. Part 4. Use and handling of sulphurhexafluoride (SF6)

PEL/17/1


09/30213280 DCBS ISO/IEC 7816-1 Identification cards.Integrated cards. Cards with contacts. Part 1.Physical characteristics

IST/17


09/30213528 DCBS EN 60296 Fluids for electrotechnicalapplications. Unused mineral insulating oils fortransformers and switchgear

GEL/10


09/30213532 DCBS EN 60475 Method of sampling liquiddielectrics

GEL/10


09/30213551 DCBS EN 60567 Oil-filled electrical equipment.Sampling of gases and of oil for analysis of freeand dissolved gases. Guidance

GEL/10


09/30212622 DCBS EN 3682-002 Aerospace series. Connectors,plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel,operating temperature 150ºC continuous. Part 002. Specification of performance andcontact arrangements

ACE/6


09/30212624 DCBS EN 50550 Power frequency overvoltageprotective device for household and similarapplications (POP)

PEL/23/1

09/30212627 DCBS EN 3682-003 Aerospace series. Connectors,plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel,operating temperature 150ºC continuous. Part 003. Inserts. Product standard

ACE/6


09/30212628 DCBS EN 3682-004 Aerospace series. Connectors,plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel,operating temperature 150ºC continuous. Part 004. Size 2 receptacle. Product standard

ACE/6


09/30212729 DCBS EN 62464-2 Medical electrical equipment.Magnetic resonance equipment for medicalimaging. Part 2. Classification criteria for pulsesequences

CH/62/2

09/30212865 DCBS ISO 5149-4 Refrigerating systems and heatpumps. Safety and environmental requirements.Part 4. Operation, maintenance, repair andrecovery

RHE/18

09/30212929 DCBS EN 61850-4 Communication networks andsystems for power utility automation. Part 4.System and project management

PEL/57

09/30212942 DCBS EN 60076-18 Power transformers. Part 18.Measurement of frequency response

PEL/14


09/30212946 DCBS EN 61300-2-10 Fibre optic interconnectingdevices and passive component. Basic test andmeasurement procedures. Part 2-10. Tests. Crushresistance

GEL/86/2


09/30209756 DCBS EN 13710 European Ordering Rules.Ordering of characters from Latin, Greek,Cyrillic, Georgian and Armenian scripts

ICT/-/1

09/30210061 DCBS EN 13445-5 AMD2 Unfired pressure vessels.Part 5. Inspection and testing

PVE/1

09/30210215 DCBS EN 13445-5 AMD1 Unfired pressure vessels.Part 5. Inspection and testing

PVE/1

09/30210236 DCBS EN 1816 Resilient floor coverings.Specification for homogeneous andheterogeneous smooth rubber floor coveringswith foam backing

PRI/3/60

09/30210239 DCBS EN 1817 Resilient floor coverings.Specification for homogeneous andheterogeneous smooth rubber floor coverings

PRI/3/60

09/30210242 DCBS EN 13647 Wood flooring and woodpanelling and cladding. Determination ofgeometrical characteristics

B/543

09/30210245 DCBS EN 13228 Wood flooring. Solid woodoverlay flooring elements including blocks withan interlocking system

B/543

09/30212268 DCBS ISO 8625-4 Aerospace fluid systems.Vocabulary. Part 4. Control/actuation systems

ACE/69

09/30212527 DCBS EN 61850-7-410 Communication networksand systems for power utility automation. Part7-410. Hydroelectric power plants.Communication for monitoring and control

PEL/57


09/30212538 DCBS EN 60335-2-53 Household and similarelectrical appliances. Safety. Part 2-53. Particularrequirements for sauna heating appliances andinfrared cabins

CPL/61/07

09/30212621 DCBS EN 3682-001 Aerospace series. Connectors,plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel,operating temperature 150ºC continuous. Part 001. Technical specification

ACE/6


Draft British Standards for Public Comment continued...


prEN 2434-004Aerospace series. Paints and varnishes. Twocomponent cold curing polyurethane finish.High flexibility

The above has been issued at CEN Formal Votestage. Copies of the draft are available onrequest from the contact point (below).Contact: Committee Service CentreEmail: [email protected]

ACE/65/-/3

prEN 4662Aerospace series. Test specification for vibrationcontrol components


ACE/12

prEN 4800-001Aerospace series. Titanium and titanium alloys.Technical specification. Plate, sheet and strip


ACE/61/-/49

prEN 60335-2-91Household and similar electrical appliances.Safety. Particular requirements for walk-behindand hand-held lawn trimmers and lawn edgetrimmers

The above draft has been issued under theCENELEC UAP. Copies can be obtained from the Programme Manager (below). Anycomments should be submitted no later than28 February, 2010.Contact: Bob StrattonEmail: [email protected]

CPL/61/23

CEN/CENELEC UNIQUEACCEPTANCE PROCEDURE


prEN ISO 2171(ISO 2171:2007)Cereals, pulses and by-products. Determinationof ash yield by incineration

prEN ISO 5529(ISO 5529:2007)Wheat. Determination of the sedimentationindex. Zeleny test

prEN 2240-035Aerospace series. Lamps, incandescent. Lamp,code 387. Product standard
















The above have been issued at CEN Formal Votestage. Copies of the drafts are available onrequest from the contact point (below).Contact: Committee Service CentreEmail: [email protected]

ACE/6

DOCUMENTS NOT ISSUEDAS DPCs


BS EN 14023:2005Bitumen and bituminous binders. Specificationframework for polymer modified bitumens

This standard is currently being revised by CEN.The text has been made available under theCEN UAP to member bodies for final vote.Editorial comments only are allowed at thisstage.If you have editorial comments they should bedirected to the Programme Manager (below).

Contact: Bernard Williams

Email: [email protected]

B/510/19

EN 13848-5:2008/Amendment 1Railway applications. Track. Track geometryquality. Geometric quality levels. Plain line

The above amendment has been circulated byCEN/TC 256 under the shortened UAPprocedure. Copies of the text of theamendment may be obtained from theProgramme Manager (below).

Contact: Tim Newins


RAE/2

ISO/DIS 10672-2Non-destructive testing of welds. Acceptancelevels for radiographic testing. Aluminium andits alloys

This project created by ISO/TC 44/SC 5 is toadopt EN 12517-2:2008 as an ISO standard.Once the ISO is published CEN will consideradoption of it as an EN ISO via the UAP process.

Contact: Anne Hannan


WEE/46






EN 1058:2009Wood-based panels. Determination ofcharacteristic 5-percentile values andcharacteristic mean values

B/541

EN 1060-2:1995+A1:2009Non-invasive sphygmomanometers.Supplementary requirements for mechanicalsphygmomanometers

CH/205/10

EN 1060-3:1997+A2:2009Non-invasive sphygmomanometers.Supplementary requirements for electro-mechanical blood pressure measuring systems

CH/205/10

EN 1230-1:2009Paper and board intended to come into contactwith foodstuffs. Sensory analysis. Odour

CW/47/3

EN 1330-9:2009Non-destructive testing. Terminology. Termsused in acoustic emission testing

WEE/46

EN 1335-3:—Office furniture. Office work chair. Safety testmethods

CORRIGENDUM 1:November 2009

to EN 1335-3:2009FW/0/3

EN 1349:2009Industrial process control valves

PSE/7/11

EN 1501-1:1998+A2:2009Refuse collection vehicles and their associatedlifting devices. General requirements and safetyrequirements. Rear-end loaded refuse collectionvehicles

B/508/1

EN 1501-2:2005+A1:2009Refuse collection vehicles and associated liftingdevices. General requirements and safetyrequirements. Side loaded refuse collectionvehicles

B/508/1

EN 1539:2009Dryers and ovens, in which flammablesubstances are released. Safety requirements

MCE/3/8

EN 1656:2009Chemical disinfectants and antiseptics.Quantitative suspension test for the evaluationof bactericidal activity of chemical disinfectantsand antiseptics used in the veterinary area. Testmethod and requirements (phase 2, step 1)

CH/216

EN 1744-1:2009Tests for chemical properties of aggregates.Chemical analysis

B/502/6

EN 415-5:2006+A1:2009Safety of packaging machines. Wrappingmachines

MCE/3/3

EN 420:2003+A1:2009Protective gloves. General requirements andtest methods

PH/3/8

EN 621:2009Non-domestic gas-fired forced convection airheaters for space heating not exceeding a netheat input of 300 kW, without a fan to assisttransportation of combustion air and/orcombustion products

GSE/20

EN 622-4:2009Fibreboards. Specifications. Requirements forsoftboards

B/541

EN 622-5:2009Fibreboards. Specifications. Requirements fordry process boards (MDF)

B/541

EN 848-1:2007+A1:2009Safety of woodworking machines. One sidemoulding machines with rotating tool. Singlespindle vertical moulding machines

MTE/23

EN 848-2:2007+A1:2009Safety of woodworking machines. One sidemoulding machines with rotating tool. Singlespindle hand fed/integrated fed routingmachines

MTE/23

EN 859:2007+A1:2009Safety of woodworking machines. Hand fedsurface planing machines

MTE/23

EN 933-11:—Tests for geometrical properties of aggregates.Classification test for the constituents of coarserecycled aggregate


to EN 933-11:2009B/502/6

EN 1017:—Chemicals used for treatment of water intendedfor human consumption. Half-burnt dolomite


to EN 1017:2008CII/59

EN 1018:—Chemicals used for treatment of water intendedfor human consumption. Calcium carbonate


to EN 1018:2006CII/59

prEN ISO 6540(ISO 6540:1980)Maize. Determination of moisture content (onmilled grains and on whole grains)

prEN ISO 11085(ISO 11085:2008)Cereals, cereals-based products and animalfeeding stuffs. Determination of crude fat andtotal fat content by the Randall extractionmethod

The above standards have been circulatedunder the UAP procedure for adoptions asEuropean Standards. Please submit anycomments by 22 January, 2010 to the contactpoint (below).Contact: Committee Service CentreEmail: [email protected]

AW/4

CEN EUROPEANSTANDARDS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CEN but have not yet beenpublished as BS ENs. BSI has an obligationto adopt all ENs and to withdraw anyconflicting British Standards (BSs) or partsof BSs. The following will beimplemented as BS ENs or as amendmentsto BS ENs shortly. Notification of theirimplementation will be given in theBS EN Publications section of the relevantedition of Update Standards.

EN 3-10:2009Portable fire extinguishers. Provisions forevaluating the conformity of a portable fireextinguisher to EN 3-7

FSH/2

EN 46-1:2009Wood preservatives. Determination of thepreventive action against recently hatchedlarvae of Hylotrupes bajulus (Linnaeus).Application by surface treatment (laboratorymethod)

B/515

EN 46-2:2009Wood preservatives. Determination of thepreventive action against recently hatchedlarvae of Hylotrupes bajulus (Linnaeus). Ovicidaleffect (laboratory method)

B/515

EN 267:2009Automatic forced draught burners for liquidfuels

GSE/27

EN 343:—Protective clothing. Protection against rain


to EN 343:2003/A1:2007PH/3

CEN/CENELEC Unique Acceptance Procedure continued...


EN 4161:2009Aerospace series. Screws, pan head, offsetcruciform recess, coarse tolerance normal shank,long thread, in alloy steel, cadmium plated.Classification. 1100 MPa (at ambienttemperature)/235ºC

ACE/12

EN 4162:2009Aerospace series. Screws 100º countersunknormal head, offset cruciform recess, coarsetolerance normal shank, medium length thread,in alloy steel, cadmium plated. 1100 MPa (at ambient temperature)/235ºC

ACE/12

EN 4163:2009Aerospace series. Screws 100º countersunknormal head, offset cruciform recess, coarsetolerance normal shank, long thread, in alloysteel, cadmium plated. 1100 MPa (at ambienttemperature)/235ºC

ACE/12

EN 4178:2009Aerospace series. Screws, pan head, six loberecess, coarse tolerance normal shank, mediumlength thread, in titanium alloy, anodized,MoS2 lubricated. 1100 MPa (at ambienttemperature)/315ºC

ACE/12

EN 4645-002:2009Aerospace series. Connectors, optical, circular,single and multipin, coupled by threaded ring,self-locking 1,25 mm diameter ferrule withremovable alignment sleeveholder. Specificationof performance and contact arrangements

ACE/6

EN 6069:2009Aerospace series. Rivet, 100º reduced flushhead, close tolerance. Inch series

ACE/12

EN 12001:2003+A1:2009Conveying, spraying and placing machines forconcrete and mortar. Safety requirements

B/513/-/8

EN 12622:2009Safety of machine tools. Hydraulic press brakes

MTE/1/1

EN 12966-1:2005+A1:2009Road vertical signs. Variable message trafficsigns. Product standard

B/509/3

EN 13029:2009Packaging. Light-gauge metal packaging.Apertures for plug-in plastic closures

PKW/0/-/4

EN 13042-1:2007+A1:2009Machines and plants for the manufacture,treatment and processing of hollow glass.Safety requirements. Gob feeder

MCE/3/13

EN 2869:2009Aerospace series. Nuts, hexagonal,slotted/castellated, normal height, normalacross flats, in heat resisting steel, passivated.Classification. 1100 MPa (at ambienttemperature)/650ºC

ACE/12

EN 3660-003:2009Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Grommet nut, style A for EN 2997and EN 4067. Product standard

ACE/6

EN 3660-004:2009Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Cable outlet, style A, straight,unsealed with clamp strain relief for EN 2997and EN 4067. Product standard

ACE/6

EN 3660-005:2009Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Cable outlet, style A, 90º, unsealedwith clamp strain relief for EN 2997 andEN 4067. Product standard

ACE/6

EN 3757:2009Aerospace series. Nuts, anchor, self-locking,floating, self aligning, two lugs, in heatresisting steel, MoS2 lubricated. Classification.900 MPa (at ambient temperature)/315ºC

ACE/12

EN 4073:2009Aerospace series. Screws, pan head, six loberecess, coarse tolerance normal shank, mediumlength thread, in alloy steel, cadmium plated.Classification. 1100 MPa (at ambienttemperature)/235ºC

ACE/12

EN 4078:2009Aerospace series. Inserts, threaded, thin wall,locked and self-locking, in heat resisting steel,MoS2 lubricated. Classification. 1100 MPa (atambient temperature)/315ºC

ACE/12

EN 4084:2009Aerospace series. Nuts, anchor, self-locking,fixed, two lug, with counterbore, in alloy steel,cadmium plated, MoS2 lubricated.Classification. 1100 MPa (at ambienttemperature)/235ºC

ACE/12

EN 4138:2009Aerospace series. Screws, pan head, offsetcruciform recess, coarse tolerance normal shank,medium length thread, in alloy steel, cadmiumplated. Classification. 1100 MPa (at ambienttemperature)/235ºC

ACE/12

EN 1822-1:2009High efficiency air filters (EPA, HEPA and ULPA).Classification, performance testing, marking

MCE/21/3

EN 1822-2:2009High efficiency air filters (EPA, HEPA and ULPA).Aerosol production, measuring equipment,particle counting statistics

MCE/21/3

EN 1822-3:2009High efficiency air filters (EPA, HEPA and ULPA).Testing flat sheet filter media

MCE/21/3

EN 1822-4:2009High efficiency air filters (EPA, HEPA and ULPA).Determining leakage of filter elements (scanmethod)

MCE/21/3

EN 1822-5:2009High efficiency air filters (EPA, HEPA and ULPA).Determining the efficiency of filter elements

MCE/21/3

EN 1993-1-3:—Eurocode 3. Design of steel structures. Generalrules. Supplementary rules for cold-formedmembers and sheeting


to EN 1993-1-3:2006B/525/32

EN 2240-002:2009Aerospace series. Lamps, incandescent. Maincharacteristics

ACE/6

EN 2817:2009Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5).Consumable electrode remelted. Solution treatedand precipitation treated. Bar for machining. a orD ≤ 200mm. Rm ≥ 1070 MPa

ACE/61/-/15

EN 2865:2009Aerospace series. Nuts, anchor, self-locking,floating, two lugs, with counterbore, in heatresisting steel, MoS2 lubricated. Classification.1100 MPa (at ambient temperature)/315ºC

ACE/12

EN 2866:2009Aerospace series. Nuts, anchor, self-locking,floating, one lug, with counterbore, in steel,cadmium plated, MoS2 lubricated.Classification. 1110 MPa (at ambienttemperature)/235ºC

ACE/12

EN 2867:2009Aerospace series. Nuts, anchor, self-locking,floating, one lug, with counterbore, in heatresisting steel, MoS2 lubricated. Classification.1100 MPa (at ambient temperature)/315ºC

ACE/12


EN 15649-5:2009Floating leisure articles for use on and in thewater. Additional specific safety requirementsand test methods for Class C devices

SW/65

EN 15649-6:2009Floating leisure articles for use on and in thewater. Additional specific safety requirementsand test methods for Class D devices

SW/65

EN 15649-7:2009Floating leisure articles for use on and in thewater. Additional specific safety requirementsand test methods for Class E devices

SW/65

EN 15689:2009Railway applications. Track, Switches andcrossings. Crossing components made of castaustenitic manganese steel

RAE/2

EN 15695-1:2009Agricultural tractors and self-propelled sprayers.Protection of the operator (driver) againsthazardous substances. Cab classification,requirements and test procedures

AGE/6

EN 15695-2:2009Agricultural tractors and self-propelled sprayers.Protection of the operator (driver) againsthazardous substances. Filters, requirements andtest procedures

AGE/6

EN 15708:2009Water quality. Guidance standard for thesurveying, sampling and laboratory analysis ofphytobenthos in shallow running water

EH/3/5

EN 15838:2009Soil quality. Leaching procedures for subsequentchemical and ecotoxicological testing of soiland soil materials. Batch test using a liquid tosolid ratio of 2 l/kg dry matter

SVS/0/1

EN 15841:2009Ambient air quality. Standard method fordetermination of arsenic, cadmium, lead andnickel in atmospheric deposition

EH/2/3

CEN WORKSHOPAGREEMENTS

CWA 16026:2009Standardisation of online dispute resolutiontools

no current standard is superseded£84.00 members, £168.00 non-members

CWA 16036:2009Cyber-identity. Unique identification systems fororganizations and parts thereof

no current standard is superseded£90.00 members, £180.00 non-members

EN 14459:—Control functions in electronic systems for gasburners and gas burning appliances. Methodsfor classification and assessment


to EN 14459:2007GSE/22

EN 14774-2:2009Solid biofuels. Determination of moisturecontent. Oven dry method. Total moisture.Simplified method

PTI/17

EN 14775:2009Solid biofuels. Determination of ash content

PTI/17

EN 14811:2006+A1:2009Railway applications. Track. Special purpose rail.Grooved and associated construction

RAE/2

EN 14891:—Liquid applied water impermeable products foruse beneath ceramic tiling bonded withadhesives. Requirements, test methods,evaluation of conformity, classification anddesignation


to EN 14891:2007B/539

EN 15030:—Chemicals used for treatment of water intendedfor human consumption. Silver salts forintermittent use


to EN 15030:2005CII/59

EN 15148:2009Solid biofuels. Determination of the content ofvolatile matter

PTI/17

EN 15200:—Sanitary appliances. Multifunction showercabinets


to EN 15200:2007B/503

EN 15649-1:2009Floating leisure articles for use on and in thewater. Classification, materials, generalrequirements and test methods

SW/65

EN 15649-2:2009Floating leisure articles for use on and in thewater. Consumer information

SW/65

EN 15649-3:2009Floating leisure articles for use on and in thewater. Additional specific safety requirementsand test methods for Class A devices

SW/65

EN 13112:2002+A1:2009Tannery machines. Splitting and bandknifeshearing machines. Safety requirements

MCE/3

EN 13114:2002+A1:2009Tannery machines. Rotating process vessels.Safety requirements

MCE/3

EN 13140:2000+A1:2009Agricultural machinery. Sugar beet and fodderbeet harvesting equipment. Safety

AGE/32

EN 13146-9:2009Railway applications. Track. Test methods forfastening systems. Determination of stiffness

RAE/2

EN 13245-2:—Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Profiles forinternal and external wall and ceiling finishes


to EN 13245-2:2008PRI/82

EN 13598-2:—Plastics piping systems for non-pressureunderground drainage and sewerage.Unplasticized poly(vinyl chloride) (PVC-U),polypropylene (PP) and polyethylene (PE).Specifications for manholes and inspectionchambers in traffic areas and deepunderground installations


to EN 13598-2:2009PRI/88/1

EN 13674-4:2006+A1:2009Railway applications. Track. Rail. Vignolerailway rails from 27 kg/m to, but excluding 46 kg/m

RAE/2

EN 13803-2:2006+A1:2009Railway applications. Track. Track alignmentdesign parameters. Track gauges 1435 mm andwider. Switches and crossings and comparablealignment design situations with abruptchanges of curvature

RAE/2

EN 13941:—Design and installation of preinsulated bondedpipe systems for district heating


to EN 13941:2009RHE/9

EN 14214:2008+A1:2009Automotive fuels. Fatty acid methyl esters(FAME) for diesel engines. Requirements andtest methods

PTI/2

CEN European Standards continued...


EN 60439-3:—Low-voltage switchgear and controlgearassemblies. Particular requirements for low-voltage switchgear and controlgear assembliesintended to be installed in places whereunskilled persons have access for their use.Distribution boards


to EN 60439-3:1991PEL/17/3

EN 60601-2-20:2009(IEC 60601-2-20:2009)Medical electrical equipment. Particularrequirements for the basic safety and essentialperformance of infant transport incubators

CH/62/4

EN 60603-7-1:2009(IEC 60603-7-1:2009)Connectors for electronic equipment. Detailspecification for 8-way, shielded, free and fixedconnectors

EPL/48

EN 60603-7-2:2009(IEC 60603-7-2:2007)Connectors for electronic equipment. Detailspecification for 8-way, unshielded, free andfixed connectors, for data transmissions withfrequencies up to 100MHz

EPL/48

EN 60603-7-3:2009(IEC 60603-7-3:2008)Connectors for electronic equipment. Detailspecification for 8-way, shielded, free and fixedconnectors, for data transmissions withfrequencies up to 100MHz

EPL/48

EN 60603-7-5:2009(IEC 60603-7-5:2007)Connectors for electronic equipment. Detailspecification for 8-way, shielded, free and fixedconnectors, for data transmissions withfrequencies up to 250MHz

EPL/48

EN 60603-7:2009(IEC 60603-7:2008)Connectors for electronic equipment. Detailspecification for 8-way, unshielded, free andfixed connectors

EPL/48

EN 60630:—(IEC 60630:1994/A6:2009)Maximum lamp outlines for incandescent lamps

AMENDMENT 6:November 2009

to EN 60630:1998CPL/34/1

EN 60633:—(IEC 60633:1998/A1:2009)Terminology for high-voltage direct current(HVDC) transmission


to EN 60633:1999PEL/22

CEN/TS 15901-9:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface by measurement of thelongitudinal friction coefficient (LFCD): DWWNLskid resistance trailer

B/510/5

CEN/TS 15901-10:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal block measurement (LFCSK): theSkiddometer BV-8

B/510/5

CENELEC PUBLICATIONS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CENELEC but have not yetbeen published as BS ENs. BSI has anobligation to adopt all ENs and towithdraw any conflicting BritishStandards (BSs) or parts of BSs. Thefollowing will be implemented as BS ENsor as amendments to BS ENs shortly.Notification of their implementation willbe given in the BS EN Publications sectionof the relevant edition of UpdateStandards.

EN 50173-1:—Information technology. Generic cablingsystems. General requirements


to EN 50173-1:2007TCT/7

EN 55011:2009(IEC CISPR 11:2009)Industrial, scientific and medical equipment.Radio-frequency disturbance characteristics.Limits and methods of measurement

GEL/210/11

EN 60068-2-38:2009(IEC 60068-2-38:2009)Environmental testing. Tests. Test Z/AD.Composite temperature/humidity cyclic test

GEL/104

EN 60269-4:2009(IEC 60269-4:2009)Low-voltage fuses. Supplementary requirementsfor fuse-links for the protection ofsemiconductor devices

PEL/32

EN 60300-3-11:2009(IEC 60300-3-11:2009)Dependability management. Application guide.Reliability centered maintenance

DS/1

CEN REPORTS

CEN/TR 15822:2009Plastics. Biodegradable plastics in or on soil.Recovery, disposal and related environmentalissues

PRI/21

CEN TECHNICALSPECIFICATIONS

CEN/TS 15901-1:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal fixed slip ratio (LFCS): RoadSTAR

B/510/5

CEN/TS 15901-2:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal controlled slip (LFCRNL): ROAR(Road Analyser and Recorder of Norsemeter)

B/510/5

CEN/TS 15901-3:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal controlled slip (LFCA): The ADHERA

B/510/5

CEN/TS 15901-4:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofpavements using a device with longitudinalcontrolled slip (LFCT): Tatra Runway Tester (TRT)

B/510/5

CEN/TS 15901-5:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal controlled slip (LFCRDK): ROAR(Road Analyser and Recorder of Norsemeter)

B/510/5

CEN/TS 15901-6:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface by measurement of thesideway force coefficient (SFCS): SCRIM

B/510/5

CEN/TS 15901-7:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal fixed slip ratio (LFCG): theGripTester

B/510/5

CEN/TS 15901-8:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface by measurement of thesideway-force coefficient (SFCD): SKM

B/510/5

CEN Reports


CENELEC REPORTS

CLC/TR 62453-41:2009(IEC/TR 62453-41:2009)Field device tool (FDT) interface specification.Object model integration profile. Commonobject model

AMT/7

CLC/TR 62453-61:2009(IEC/TR 62453-61:2009)Field device tool (FDT) interface specification.Device type manager (DTM). Style guide forcommon object model

AMT/7

CLC/TR 62453-501:2009(IEC/TR 62453-501:2009)Field device tool (FDT) interface specification.Communication implementation for commonobject model. IEC 61784 CPF 1

AMT/7


AMT/7

CLC/TR 62453-503-1:2009(IEC/TR 62453-503-1:2009)Field device tool (FDT) interface specification.Communication implementation for commonobject model. IEC 61784 CP 3/1 and CP 3/2

AMT/7

CLC/TR 62453-503-2:2009(IEC/TR 62453-503-2:2009)Field device tool (FDT) interface specification.Communication implementation for commonobject model. IEC 61784 CP 3/4, CP 3/5 and CP 3/6

AMT/7


AMT/7


AMT/7


AMT/7

EN 61988-2-3:2009(IEC 61988-2-3:2009)Plasma display panels. Measuring methods.Image quality: defects and degradation

EPL/47

EN 61988-3-2:2009(IEC 61988-3-2:2009)Plasma display panels. Interface. Electricalinterface

EPL/47

EN 62040-3:—Uninterruptible power systems (UPS). Methodof specifying the performance and testrequirements


to EN 62040-3:2001PEL/22

EN 62074-1:2009(IEC 62074-1:2009)Fibre optic interconnecting devices and passivecomponents. Fibre optic WDM devices. Genericspecification

GEL/86/2

EN 62134-1:2009(IEC 62134-1:2009)Fibre optic interconnecting devices and passivecomponents. Fibre optic closures. Genericspecification

GEL/86/2

EN 62223:2009(IEC 62223:2009)Insulators. Glossary of terms and definitions

PEL/36

EN 62282-6-300:2009(IEC 62282-6-300:2009)Fuel cell technologies. Micro fuel cell powersystems. Fuel cartridge interchangeability

GEL/105

EN 62386-205:2009(IEC 62386-205:2009)Digital addressable lighting interface. Particularrequirements for control gear. Supply voltagecontroller for incandescent lamps (device type 4)

CPL/34/3

EN 62386-206:2009(IEC 62386-206:2009)Digital addressable lighting interface. Particularrequirements for control gear. Conversion fromdigital signal into D.C. voltage (device type 5)

CPL/34/3

EN 62386-207:2009(IEC 62386-207:2009)Digital addressable lighting interface. Particularrequirements for control gear. LED modules(device type 6)

CPL/34/3

EN 60738-1:—(IEC 60738-1:2006/A1:2009)Thermistors. Directly heated positivetemperature coefficient. Generic specification


to EN 60738-1:2006EPL/40X

EN 60749-20:2009(IEC 60749-20:2008)Semiconductor devices. Mechanical and climatictest methods. Resistance of plastic encapsulatedSMDs to the combined effect of moisture andsoldering heat

EPL/47

EN 60947-7-3:2009(IEC 60947-7-3:2009)Low-voltage switchgear and controlgear.Ancillary equipment. Safety requirements forfuse terminal blocks

PEL/17/2

EN 61300-2-1:2009(IEC 61300-2-1:2009)Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Tests. Vibration (sinusoidal)

GEL/86/2

EN 61300-2-12:2009(IEC 61300-2-12:2009)Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Tests. Impact

GEL/86/2

EN 61439-1:2009(IEC 61439-1:2009)Low-voltage switchgear and controlgearassemblies. General rules

PEL/17/3

EN 61439-2:2009(IEC 61439-2:2009)Low-voltage switchgear and controlgearassemblies. Power switchgear and controlgearassemblies

PEL/17/3

EN 61606-1:2009(IEC 61606-1:2009)Audio and audiovisual equipment. Digital audioparts. Basic measurement methods of audiocharacteristics. General

EPL/100

EN 61606-2:2009(IEC 61606-2:2009)Audio and audiovisual equipment. Digital audioparts. Basic measurement methods of audiocharacteristics. Consumer use

EPL/100

EN 61753-086-2:2009(IEC 61753-086-2:2009)Fibre optic interconnecting devices and passivecomponents performance standard. Non-connectorised single-mode bidirectional1490/1550 nm downstream 1310 nm upstreamWWDM devices for category C. Controlledenvironment

GEL/86/2


IEC 61978-1:2009(Edition 2)

Fibre optic interconnecting devices and passivecomponents. Fibre optic passive chromaticdispersion compensators. Generic specification£108.48 members, £113.00 non-members

GEL/86/2

IEC 61988-5:2009Plasma display panels. Generic specification£100.80 members, £105.00 non-members

EPL/47

IEC 62150-4:2009Fibre optic active components and devices. Testand measurement procedures. Relative intensitynoise using a time-domain optical detectionsystem£57.60 members, £60.00 non-members

GEL/86/3

IEC/TR 62271-305:2009High-voltage switchgear and controlgear.Capacitive current switching capability of air-insulated disconnectors for rated voltagesabove 52 kV£73.92 members, £77.00 non-members

PEL/17/1

IEC 62341-5:2009Organic light emitting diode (OLED) displays.Environmental testing methods£57.60 members, £60.00 non-members

EPL/47

IEC 62423:2009(Edition 2)

Type F and type B residual current operatedcircuit-breakers with and without integralovercurrent protection for household andsimilar uses£134.40 members, £140.00 non-members

PEL/23/1

IEC 62540:2009Radio frequency identification (RFID) ofstationary lead acid cells and monoblocs.Tentative requirements£91.20 members, £95.00 non-members

PEL/21

IEC 62578:2009Power electronics systems and equipment.Operation conditions and characteristics ofactive infeed converter applications£199.68 members, £208.00 non-members

PEL/22

IEC CISPR 22:—Information technology equipment. Radiodisturbance characteristics. Limits and methodsof measurement

INTERPRETATION SHEET 1:October 2009

to IEC CISPR 22:2008GEL/210/11

IEC 60789:—Medical electrical equipment. Characteristicsand test conditions of radionuclide imagingdevices. Anger type gamma cameras

CORRIGENDUM 1:October 2009

to IEC 60789:2005CH/62/3

IEC 60851-1:—Winding wires. Test methods. General


to IEC 60851-1:1996£17.28 members, £18.00 non-members

GEL/55

IEC 61243-3:2009(Edition 2)

Live working. Voltage detectors. Two-pole low-voltage type£199.68 members, £208.00 non-members

PEL/78

IEC 61280-1-4:2009(Edition 2)

Fibre optic communication subsystem testprocedures. General communication subsystems.Light source encircled flux measurementmethod£134.40 members, £140.00 non-members

GEL/86/3

IEC 61300-3-35:2009Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Examinations and measurements.Fibre optic connector end face visual andautomated inspection£91.20 members, £95.00 non-members

GEL/86/2

IEC 61753-111-7:2009Fibre optic interconnecting devices and passivecomponents performance standard. Sealedclosures for category A. Aerial£100.80 members, £105.00 non-members

GEL/86/2

IEC 61753-111-8:2009Fibre optic interconnecting devices and passivecomponents performance standard. Sealedclosures for category G. Ground£91.20 members, £95.00 non-members

GEL/86/2

IEC 61753-111-9:2009Fibre optic interconnecting devices and passivecomponents performance standard. Sealedclosures for category S. Subterranean£100.80 members, £105.00 non-members

GEL/86/2

IEC/TR 61916:2009(Edition 2)

Electrical accessories. Harmonization of generalrules£100.80 members, £105.00 non-members

PEL/23

IEC PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following IEC publications areavailable from BSI Customer Services (see’How to order’ on page 2)

IEC/ISO 31010:2009Risk management. Risk assessment techniques£220.80 members, £230.00 non-members

DS/1

IEC 60079-29-4:2009Explosive atmospheres. Gas detectors.Performance requirements of open pathdetectors for flammable gases£121.92 members, £127.00 non-members

GEL/31/19

IEC 60092-306:2009(Edition 4)

Electrical installations in ships. Equipment.Luminaires and lighting accessories£83.52 members, £87.00 non-members

JPEL/18

IEC 60191-6:2009(Edition 3)

Mechanical standardization of semiconductordevices. General rules for the preparation ofoutline drawings of surface mountedsemiconductor device packages£134.40 members, £140.00 non-members

EPL/47

IEC 60335-2-30:2009(Edition 5)

Household and similar electrical appliances.Safety. Particular requirements for room heaters£108.48 members, £113.00 non-members

CPL/61/07

IEC 60404-3:—Magnetic materials. Methods of measurementof the magnetic properties of electrical steelstrip and sheet by means of a single sheet tester


to IEC 60404-3:1992£30.72 members, £32.00 non-members

ISE/NFE/5

IEC 60695-1-10:2009Fire hazard testing. Guidance for assessing thefire hazard of electrotechnical products.General guidelines£73.92 members, £77.00 non-members

GEL/89

IEC Publications


ISO 6721-12:2009Plastics. Determination of dynamic mechanicalproperties. Compressive vibration. Non-resonance method£50.88 members, £53.00 non-members

PRI/21

Will be implemented as an identical British Standard

ISO 7176-9:2009(Edition 3)

Wheelchairs. Climatic tests for electricwheelchairs£57.60 members, £60.00 non-members

CH/173/1


ISO 8536-6:2009(Edition 2)

Infusion equipment for medical use. Freezedrying closures for infusion bottles£74.88 members, £78.00 non-members

CH/212


ISO 8724:2009(Edition 2)

Cork decorative panels. Specification£57.60 members, £60.00 non-members

PRI/81

Will not be implemented as a British Standard

ISO 9100-2:—Glass containers. Vacuum lug finishes. 33medium


to ISO 9100-2:2005PKW/0/-/7


ISO/IEC 9594-6:—Information technology. Open SystemsInterconnection. The Directory: Selectedattribute types


to ISO/IEC 9594-6:2005IST/6


ISO/IEC 9594-8:—Information technology. Open SystemsInterconnection. The Directory: Public-key andattribute certificate frameworks


to ISO/IEC 9594-8:2005IST/6


ISO 10077-1:—Thermal performance of windows, doors andshutters. Calculation of thermal transmittance.General


to ISO 10077-1:2006B/540


ISO 639-6:2009Codes for the representation of names oflanguages. Alpha-4 code for comprehensivecoverage of language variants£74.88 members, £78.00 non-members

TS/1



Rigid cellular plastics. Determination of tensileproperties£50.88 members, £53.00 non-members

PRI/24



Textiles. Yarns from packages. Determination ofsingle-end breaking force and elongation atbreak using constant rate of extension (CRE)tester£57.60 members, £60.00 non-members

TCI/24


ISO 3046-4:2009(Edition 3)

Reciprocating internal combustion engines.Performance. Speed governing£79.68 members, £83.00 non-members

MCE/14/-/6



Textile glass. Determination of stiffness ofrovings£38.40 members, £40.00 non-members

PRI/42


ISO 3691-5:2009Industrial trucks. Safety requirements andverification. Pedestrian-propelled trucks£108.48 members, £113.00 non-members

MHE/7



Milk fat products. Determination of watercontent. Karl Fischer method£50.88 members, £53.00 non-members

AW/5


ISO 6194-3:2009(Edition 2)

Rotary shaft lip-type seals incorporatingelastomeric sealing elements. Storage, handlingand installation£57.60 members, £60.00 non-members

MCE/11


IEC/PAS PUBLICATIONS

IEC/PAS 61753-1-3:2009Fibre optic interconnecting devices and passivecomponents performance standard. Generaland guidance for performance standards.Single-mode fibre optic connector performancefor harsh industrial operating conditions£91.20 members, £95.00 non-members

GEL/86/2

ISO PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following ISO publications areavailable from BSI Customer Services (see’How to order’ on page 2)

ISO 5-1:2009(Edition 2)

Photography and graphic technology. Densitymeasurements. Geometry and functionalnotation£74.88 members, £78.00 non-members

CPW/42



Photography and graphic technology. Densitymeasurements. Geometric conditions fortransmittance density£70.08 members, £73.00 non-members

CPW/42



Photography and graphic technology. Densitymeasurements. Geometric conditions forreflection density£74.88 members, £78.00 non-members

CPW/42


ISO 105-F10:—Textiles. Tests for colour fastness. Specificationfor adjacent fabric. Multifibre


to ISO 105-F10:1989£14.40 members, £15.00 non-members

TCI/81



Metallic materials. Charpy pendulum impacttest. Test method£97.92 members, £102.00 non-members

ISE/NFE/4/4


IEC/PAS Publications



Fans. Dimensions£70.08 members, £73.00 non-members

MCE/17


ISO 13624-1:2009Petroleum and natural gas industries. Drillingand production equipment. Design andoperation of marine drilling riser equipment£180.48 members, £188.00 non-members

PSE/17/-/4


ISO 13824:2009Bases for design of structures. Generalprinciples on risk assessment of systemsinvolving structures£122.88 members, £128.00 non-members

B/525/1


ISO/IEC 14165-321:2009Information technology. Fibre channel. Audiovideo (FC-AV)£166.08 members, £173.00 non-members

IST/6


ISO 14243-1:2009(Edition 2)

Implants for surgery. Wear of total knee-jointprostheses. Loading and displacementparameters for wear-testing machines with loadcontrol and corresponding environmentalconditions for test£70.08 members, £73.00 non-members

CH/150/4


ISO 14243-2:2009(Edition 2)

Implants for surgery. Wear of total knee-jointprostheses. Methods of measurement£38.40 members, £40.00 non-members

CH/150/4



Welding consumables. Wire electrodes, stripelectrodes, wires and rods for arc welding ofstainless and heat resisting steels. Classification£74.88 members, £78.00 non-members

WEE/39


ISO/IEC 14496-12:—Information technology. Coding of audio-visualobjects. ISO base media file format


to ISO/IEC 14496-12:2008£131.52 members, £137.00 non-members

IST/37


ISO/TR 11633-1:2009Health informatics. Information securitymanagement for remote maintenance ofmedical devices and medical informationsystems. Requirements and risk analysis£79.68 members, £83.00 non-members

IST/35


ISO/TR 11633-2:2009Health informatics. Information securitymanagement for remote maintenance ofmedical devices and medical informationsystems. Implementation of an informationsecurity management system (ISMS)£145.92 members, £152.00 non-members

IST/35


ISO 11664-5:2009Colorimetry. CIE 1976 L*u*v* Colour space andu’, v’ uniform chromaticity scale diagram£50.88 members, £53.00 non-members

STI/14


ISO 11737-2:2009(Edition 2)

Sterilization of medical devices. Microbiologicalmethods. Tests of sterility performed in thedefinition, validation and maintenance of asterilization process£74.88 members, £78.00 non-members

CH/198


ISO/TS 12033:2009Document management. Electronic imaging.Guidance for the selection of document imagecompression methods£74.88 members, £78.00 non-members

IDT/1/2


ISO 12256:—Aerospace. Drives, internal, cruciform, ribbed.Metric series


to ISO 12256:2002ACE/12


ISO/TS 12813:2009Electronic fee collection. Compliance checkcommunication for autonomous systems£122.88 members, £128.00 non-members

EPL/278


ISO/IEC 13170:2009Information technology. 120 mm (8,54 Gbytesper side) and 80 mm (2,66 Gbytes per side) DVD re-recordable disk for dual layer (DVD-RWfor DL)£206.40 members, £215.00 non-members

ICT/-/1


ISO/TR 10255:2009Document management applications. Opticaldisk storage technology, management andstandards£97.92 members, £102.00 non-members

IDT/1/2


ISO 10325:2009Fibre ropes. High modulus polyethylene. 8-strand braided ropes, 12-strand braided ropesand covered ropes£45.12 members, £47.00 non-members

TCI/77


ISO 10547:2009Polyester fibre ropes. Double braid construction£38.40 members, £40.00 non-members

TCI/77


ISO 10554:2009Polyamide fibre ropes. Double braidconstruction£38.40 members, £40.00 non-members

TCI/77


ISO 10556:2009Fibre ropes of polyester/polyolefin dual fibres£45.12 members, £47.00 non-members

TCI/77


ISO 10572:2009Mixed polyolefin fibre ropes£50.88 members, £53.00 non-members

TCI/77


ISO 10704:2009Water quality. Measurement of gross alpha andgross beta activity in non-saline water. Thinsource direct deposit method£70.08 members, £73.00 non-members

EH/3


ISO 10874:2009Resilient, textile and laminate floor coverings.Classification£38.40 members, £40.00 non-members

PRI/3/60



Agricultural irrigation equipment. Centre-pivotand moving lateral irrigation machines withsprayer or sprinkler nozzles. Determination ofuniformity of water distribution£74.88 members, £78.00 non-members

AGE/30


ISO Publications continued...


ISO 18696:—Textiles. Determination of resistance to waterabsorption. Tumble-jar absorption test


to ISO 18696:2006TCI/24


ISO/IEC 19770-2:2009Information technology. Software assetmanagement. Software identification tag£166.08 members, £173.00 non-members

IST/15


ISO/IEC 19794-7:—Information technology. Biometric datainterchange formats. Signature/sign time seriesdata

CORRIGENDUM 1:December 2009

to ISO/IEC 19794-7:2007IST/44

Will be implemented as an identical British Standardby amendment to a National Standard

ISO 21809-4:2009Petroleum and natural gas industries. Externalcoatings for buried or submerged pipelinesused in pipeline transportation systems.Polyethylene coatings (2-layer PE)£113.28 members, £118.00 non-members

PSE/17/2


ISO 22009:2009Space systems. Space environment (natural andartificial). Model of the earth’s magnetosphericmagnetic field£74.88 members, £78.00 non-members

ACE/68/-/4


ISO/TS 22600-3:2009Health informatics. Privilege management andaccess control. Implementations£145.92 members, £152.00 non-members

IST/35


ISO 22769:2009Oil of Australian sandalwood [Santalumspicatum (R.Br.) A.DC.]£57.60 members, £60.00 non-members

AW/54


ISO 22915-4:2009Industrial trucks. Verification of stability. Palletstackers, double stackers and order-pickingtrucks with operator position elevating up toand including 1200 mm lift height£50.88 members, £53.00 non-members

MHE/7


ISO/IEC 15944-7:2009Information technology. Business operationalview. e-Business vocabulary£254.40 members, £265.00 non-members

IST/40


ISO 16245:2009Information and documentation. Boxes, filecovers and other enclosures, made fromcellulosic materials, for storage of paper andparchment documents£50.88 members, £53.00 non-members

IDT/2


ISO 16894:2009Wood-based panels. Oriented strand board(OSB). Definitions, classification andspecifications£70.08 members, £73.00 non-members

B/541


ISO 17264:2009Road transport systems. Automatic vehicle andequipment identification. Interfaces£84.48 members, £88.00 non-members

EPL/278


ISO 17267:2009Intelligent transport systems. Navigationsystems. Application programming interface(API)£194.88 members, £203.00 non-members

EPL/278


ISO 17364:2009Supply chain applications of RFID. Returnabletransport items (RTIs)£93.12 members, £97.00 non-members

TW/1


ISO 17365:2009Supply chain applications of RFID. Transportunits£84.48 members, £88.00 non-members

TW/1


ISO 17366:2009Supply chain applications of RFID. Productpackaging£93.12 members, £97.00 non-members

TW/1


ISO 17367:2009Supply chain applications of RFID. Producttagging£122.88 members, £128.00 non-members

TW/1


ISO/IEC 14763-3:—Information technology. Implementation andoperation of customer premises cabling. Testingof optical fibre cabling



TCT/7


ISO/IEC 15423:2009(Edition 2)

Information technology. Automaticidentification and data capture techniques. Barcode scanner and decoder performance testing£118.08 members, £123.00 non-members

IST/37


ISO/IEC 15444-12:—Information technology. JPEG 2000 imagecoding system. ISO base media file format



IST/37


ISO 15590-1:2009(Edition 2)

Petroleum and natural gas industries. Inductionbends, fittings and flanges for pipelinetransportation systems. Induction bends£108.48 members, £113.00 non-members

PSE/17/2


ISO/IEC 15909-2:2009Software and system engineering. High-levelpetri nets. Transfer format£180.48 members, £188.00 non-members

IST/15


ISO/IEC TR 15938-8:—Information technology. Multimedia contentdescription interface. Extraction and use ofMPEG-7 descriptions


to ISO/IEC TR 15938-8:2002£97.92 members, £102.00 non-members

IST/37

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK

ISO/IEC TR 15944-6:2009Information technology. Business operationalview. Technical introduction to e-Businessmodelling£118.08 members, £123.00 non-members

IST/40



ISO 31000:2009Risk management. Principles and guidelines£97.92 members, £102.00 non-members

RM/1


ISO 80000-1:2009Quantities and units. General£122.88 members, £128.00 non-members

SS/7


ISO 80000-2:2009Quantities and units. Mathematical signs andsymbols to be used in the natural sciences andtechnology£118.08 members, £123.00 non-members

SS/7


ISO 80000-10:2009Quantities and units. Atomic and nuclearphysics£145.92 members, £152.00 non-members

SS/7


ISO GUIDE 34:2009(Edition 3)

General requirements for the competence ofreference material producers£113.28 members, £118.00 non-members

RMI/1


ISO GUIDE 73:2009Risk management. Vocabulary£74.88 members, £78.00 non-members

RM/1


ISO/TS 27105:2009Milk and milk products. Determination of hen’segg white lysozyme by HPLC£57.60 members, £60.00 non-members

AW/5


ISO/TS 27106:2009Cheese. Determination of nisin A content by LC-MS and LC-MS-MS£57.60 members, £60.00 non-members

AW/5


ISO/TS 27790:2009Health informatics. Document registryframework£97.92 members, £102.00 non-members

IST/35


ISO/TS 29062:2009Road vehicles. Child restraint systems. Sled testmethod to enable the evaluation of side impactprotection£84.48 members, £88.00 non-members

AUE/7


ISO/IEC 29141:2009Information technology. Biometrics. Tenprintcapture using biometric applicationprogramming interface (BioAPI)£97.92 members, £102.00 non-members

IST/44


ISO/IEC 29171:2009Information technology. Digitally recordedmedia for information interchange and storage.Information Versatile Disk for Removable usage(iVDR) cartridge£102.72 members, £107.00 non-members

ICT/-/1


ISO/TR 29662:2009Petroleum products and other liquids. Guidancefor flash point testing£65.28 members, £68.00 non-members

PTI/13


ISO 29861:2009Document management applications. Qualitycontrol for scanning office documents in colour£45.12 members, £47.00 non-members

IDT/1/1


ISO 29945:2009Refrigerated non-petroleum-based liquefiedgaseous fuels. Dimethylether (DME). Method ofmanual sampling onshore terminals£57.60 members, £60.00 non-members

PTI/12


ISO 22966:2009Execution of concrete structures£137.28 members, £143.00 non-members

B/525/2


ISO/IEC 23000-11:2009Information technology. Multimedia applicationformat (MPEG-A). Stereoscopic videoapplication format£93.12 members, £97.00 non-members

IST/37

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK

ISO 23848-1:2009Machine tools. Ball splines. Generalcharacteristics and requirements£93.12 members, £97.00 non-members

MTE/1


ISO 23848-2:2009Machine tools. Ball splines. Dynamic and staticload ratings and rating life£50.88 members, £53.00 non-members

MTE/1


ISO 24153:2009Random sampling and randomizationprocedures£108.48 members, £113.00 non-members

SS/5


ISO/IEC 24739-2:2009Information technology. AT attachment withpacket interface-7. Parallel transport protocolsand physical interconnect (ATA/ATAPI-7)£230.40 members, £240.00 non-members

IST/6


ISO 26782:—Anaesthetic and respiratory equipment.Spirometers intended for the measurement oftime forced expired volumes in humans


to ISO 26782:2009CH/121

Will be implemented as an identical British Standardby amendment to a National Standard

ISO 26866:2009Road vehicles. Brake lining friction materials.Standard wear test procedure for commercialvehicles with air brakes£65.28 members, £68.00 non-members

AUE/11


ISO 26870:2009Space systems. Launch pad and integration siteoperational documents£74.88 members, £78.00 non-members

ACE/68/-/3


ISO Publications continued...


Help Us to Help

You!




020 8996 9001


Documents

British Standards - 2010