BRIDGE WELDING CERTIFICATIONLocal Technical Assistance Program (LTAP)

Oklahoma State University

Thursday & Friday, October 17 - 18, 20198:30 am - 4:30 pm

Canadian Valley Technology Center - El Reno Campus6505 E. US Highway 66 ~ El Reno, Oklahoma 73036

We only have 15 spots available for this very limited class,so please enroll your personnel as soon as possible.

This (2) two-day course is for experienced welders capable of passing theAASHTO/AWS D 1.5M/D 1.5 welding code certification test. The first day of class, students will review the welds they will be required to perform on the test. They will also be evaluated to determine if they

have the skills necessary to become certified. On the morning of the second day, an independent welding certification firm will test students on

AASHTO/AWS D1.5M/D 1.5. Those passing will be certified. There is a cost of $80.00 for the certification test on the second day.

The students, or their local government agencies will be invoiced by the independent welding certification firm whether they pass or fail the exam. The Oklahoma LTAP Program will pay for the

instructor, facility cost, and $270.00 of the $350.00 testing and certification fee, the students must pay the remainder of $80.00 to an independent welding certification firm if they test on the second day.

There is "no-charge" for the FIRST day of training prior to the testing!

Register online: http://ltap.okstate.edu Or call - 405.744.7496

Prep for Bridge Welding Certification, AASHTO/AWS ~ D1.5M/D1.5

This two-day class is for experienced welders capable of passing the AASHTO/AWS D1.5M/D1.5 welding code certification test. Students will review the welds they will be required to perform on the test. They will also be evaluated to determine if they have the skill necessary to become certified.

Testing for Bridge Welding Certification, AASHTO/AWS ~ D1.5M/D1.5

On another scheduled day, an independent welding certification firm will test students on AASHTO/AWS D1.5M/D1.5. Those passing will be AASHTO/AWS D1.5M/D1.5. certified. There is a cost for the certification test on that day. The students or their counties will be invoiced by the independent welding certification firm whether they

pass or fail the exam.

Cost for Bridge Welding Certification, AASHTO/AWS ~ D1.5M/D1.5

The Bridge Welding Certification ~ AASHTO/AWS D1.5M/D1.5 welding code certification test will be $80.00 per student and payments should be made out to:

C & G Inspection 118 Lynn Road,

Meeker, Oklahoma 74855

Requirements for class: Welding hood (if needed bring reading glasses or have hood fitted with welding cheater)

Clear safety glassesCutting glasses #3 shade

100% cotton long sleeved shirt & pantsLeather high-top boots

FlashlightPliers or Channel Locks

Leather gloves Right Angle Grinder (with disc and wire brush)

Chipping hammer & hand wire brush

WELDING POSITIONS"ALL TEST WELDS WILL BE PERFORMED ON ONE

INCH PLATES USING 7018 ROD"