Upload
hathien
View
343
Download
8
Embed Size (px)
Citation preview
Soupapes de sûreté - DétendeursSafety valves - Pressure reducers
Page 27
Mesure - Contrôle - NiveauMeasure - Control - Gauge
Page 79
Robinetterie pour génie climatiqueAir conditionning engineering valves
Page 91
Robinetterie plastiquePlastic valves
Page 93
Robinetterie pour vapeurSteam valves
Page 113
Raccords, robinetterie inox pour l’alimentaireFittings and valves for the food industries
Page 123
Brides - RaccordsFlanges - Fittings
Page 131
Raccords et visserie inox pour industrieStainless steel fittings, fasteners and bolts for industrie
Page 149
Instructions de montage et guide techniqueMounting instructions and technical datas
Page 153
RobinetsGlobe valves
Page 15
Vannes à passage direct - Vannes à manchonGate valves - Pinch valves
Page 3
Motorisation - Electrovannes Actuator - Solenoïd valves
Page 125
Robinets à boisseau sphérique ou coniqueBall valves - Plug valves
Page 33
Robinetterie pétrolePetroleum valves
Page 121
Flexibles industrielsIndustrial hoses
Page 45
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:58 Page1
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:58 Page3
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
4
MatériauxMaterials
DNPoids
Weight
mm
L
mm mm kg
H
V 1100 Vanne à passage direct - laiton - PN10 / Gate valve - brass - PN10Corps : laiton
Chapeau : laiton
Opercule : laiton
Tige : laiton
Joint de tige : EPDM
Joint de chapeau : fibre
Raccordement : taraudage gaz
Body: brass
Bonnet: brass
Wedge: brass
Stem: brass
Stem packing: EPDM
Bonnet gasket: fiber
Ends: threaded BSP
33363943485257657584
T max. : –10 / +100°C
P max. : 10 bar (20°C)
6767687891104128175200235
0.170.170.200.290.390.540.861.712.254.25
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
V 1141 Vanne à passage direct - laiton - PN16 / Gate valve - brass - PN16Corps : laiton
Chapeau : laiton
Opercule : laiton
Tige : laiton
Joint de tige : EPDM
Joint de chapeau : fibre
Raccordement :taraudage gaz
Body: brass
Bonnet: brass
Wedge: brass
Stem: brass
Stem packing: EPDM
Bonnet gasket: fiber
Ends: threaded BSP
434752636671
T max. : –10 / +100°C
P max : 16 bar (20°C)
748287108120143
0.280.370.520.780.991.48
1/2"3/4"1"
1"1/41"1/2
2"
RéférenceReference
Corps : bronze
Chapeau : laiton
Opercule : laiton
Tige : laiton
Joint de tige : EPDM
Joint de chapeau : fibre
Raccordement :taraudage gaz
Body: bronze
Bonnet: brass
Wedge: brass
Stem: brass
Stem packing: EPDM
Bonnet gasket: fiber
Ends: threaded BSP
T max. : –10 / +120°C
P max. : 16 bar(100°C)
13.5 bar(120°C)
66687890108122125175205235
0.170.170.200.290.390.540.861.712.254.25
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
38384548515761768096
V 2140 Vanne à passage direct - bronze - PN16 / Gate valve - bronze - PN16
Corps : bronze
Chapeau : bronze
Opercule : laiton
Tige : laiton
Joint de tige : EPDM
Joint de chapeau : fibre
Raccordement :taraudage gaz
Body: bronze
Bonnet: bronze
Wedge: brass
Stem: brass
Stem packing: EPDM
Bonnet gasket: fiber
Ends: threaded BSP
T max. : –10 / +100°C
P max. : 20 bar(20°C)
808898115122145
0.280.370.520.780.991.48
1/2"3/4"1"
1"1/41"1/2
2"
424853556070
V 2143 Vanne à passage direct - bronze - PN20 / Gate valve - bronze - PN20
Vannes à passage directRobinets à papillon
Gate valvesButterfly valves
Vanne fermée Closed valve
Vanne ouverte Opened
valve
Conditions de servicePressure
Temperature
V 2142 Vanne à passage direct - bronze - double opercule - PN20Gate valve - bronze - double wedge - PN20Corps : bronze
Chapeau : bronze
Contact d'étanchéité :métal/métal
Raccordement : taraudage gaz
Option : construction cupro-alu
Body: bronze
Bonnet: bronze
Tight: metal/metal
Ends: female threaded BSP
Option: construction aluminium/bronze
4345505868768090
P : 20 bar T : 225°C
VapeurSteam
P : 8 bar
80808595110124135148
0.220.240.320.600.961.301.932.95
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:58 Page4
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
5
MatériauxMaterials
DNPoids
Weight
mm
L
kg
Conditions de servicePressure
Temperature
V 2141 Vanne à passage direct - bronze - ouverture rapide - PN16Gate valve - bronze - quick opening - PN16Corps : bronze
Chapeau : laiton
Opercule : laiton
Contact d'étanchéité :métal/métal
Raccordement :taraudage gaz
Body: bronze
Bonnet: brass
Wedge: brass
Tight: metal/metal
Ends: female threaded BSP
444651576167778691102
T : –5 / +110°C
P : 16 bar (20°C) 40
404855626881108121148
8080100100120137165205205255
0.360.360.550.770.971.372.003.504.507.40
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
mm
Longueurpoignée Handle length
mm
ø Volant Hand-wheel
V 6140 Vanne à passage direct - inox - PN16Gate valve - stainless steel - PN16Corps : inox 316
Chapeau : inox 316
Opercule : inox 316
Tige : inox 316
Joint de tige : PTFE
Raccordement : taraudage gaz
Body: stainless steel 316
Bonnet: stainless steel 316
Wedge: stainless steel 316
Stem: stainless steel 316
Stem gasket: PTFE
Ends: female threaded BSP
576169778294
P : 16 barT : 150°C
95101112136149169
626384849595
0.500.600.800.901.502.00
1/2"3/4"1"
1"1/41"1/2
2"
V 2240 Vanne à passage direct - tige non montante - bronze - à brides PN16Gate valve - non rising stem - bronze - flanged PN16Corps : bronze
Chapeau : bronze
Contacts d'étanchéité :métal/métal
Raccordement : à brides PN16
Body: bronze
Bonnet: bronze
Tight: metal/metal
Ends: flanged PN16
757575809299112130147164
P : 16 bar T : 100°C
787898112125146170200247260
1.501.501.802.183.434.505.578.8010.3015.30
101520253240506580100
RéférenceReference
Vannes à passage directRobinets à papillon
Gate valvesButterfly valves
mm mm
HVanne fermée Closed valve
Vanne ouverte Opened
valve
L
H
V 2241 Vanne à passage direct - bronze - à brides PN16Gate valve - bronze - flanged PN16Corps : bronze
Chapeau : bronze
Contacts d'étanchéité :métal/métal
Raccordement : à brides PN10 ou PN16
Body: bronze
Bonnet: bronze
Tight: metal/metal
Ends: flanged PN10 or PN16
90100105120125140160165170180200210230
P : 16 barT : 100°C
155160185205230240300320340380430500550
3.253.905.456.808.3013.0016.0019.0021.0030.0042.0056.0077.00
2025324050658090100125150175200
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:58 Page5
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
6
MatériauxMaterials
DNPoids
Weight
mm
L
kg
Conditions de servicePressure
Temperature
V 2242 Vanne à passage direct - bronze - double opercule - PN20Gate valve - bronze - double wedge - PN20Corps : bronze
Chapeau : bronze
Contacts d'étanchéité :métal/métal
Raccordement : à brides PN10/16 - ASA 150
Dimensions selon NFE 29402
Option : construction cupro-alu
Body: bronze
Bonnet: bronze
Tight: metal/metal
Ends: flanged PN10/16 - ASA 150
Dimensions according to NFE 29402
Option: construction aluminium-bronze
8090100110136 142
P max. : 20 bar
Tmax. : 200°C
VapeurSteam
P : 8 bar
8495100120137155
1.542.032.854.386.048.15
152025324050
RéférenceReference
V 3200 Vanne à passage direct - tige non montante - fonte - PN10Gate valve - non rising stem - cast iron - PN10Corps : fonte Ft 25
Chapeau : fonte Ft 25
Contacts d'étanchéité :alliage cuivreux
Tige : acier inox
Raccordement :à brides PN10
Options : tige laiton, contact d'étanchéité inox,revêtement époxy, réducteur manuel
Body: cast iron GG25
Bonnet: cast iron GG25
Tight: brass
Stem: stainless steel
Ends: flanged PN10
Options: brass stem, tightness stainless steel, epoxy coating, manualgear box
140150170180190200210230250270290310350390430470510550630
2702923243603804544905787117678709411188130014801710188020302435
810141822293562901171622113405007201100130015002900
4050658010012515020025030035040050060070080090010001200
Vannes à passage directRobinets à papillon
Gate valvesButterfly valves
DN40/150P : 10 bar
DN200/300P : 6 bar
DN350/500P : 4 bar
DN600/700P : 2.5 bar
DN800P : 1.6 bar
DN900/1200P : 1 bar
T : 120°C
mm mm
HVanne fermée Closed valve
Vanne ouverte Opened
valve
V 3201 Vanne à passage direct - tige non montante - corps oval - fonte - PN10Gate valve - non rising stem - oval body - cast iron - PN10Corps : fonte Ft 25
Chapeau : fonte Ft 25
Contacts d'étanchéité :alliage cuivreux
Tige : acier inox
Raccordement : à brides PN10
Avec réducteur manuel à partir du DN700
Options : tige laiton, contact d'étanchéité inox
Nota : existe en version tige extérieure
Body: cast iron GG25
Bonnet: cast iron GG25
Tight: brass
Stem: stainless steel
Ends: flanged PN10
With manual gear box from DN700
Options: brass stem, stainless steel tightness
Please note: exist with rising stem
2402502702803003253504004505005506007008009001000110012001400
DN40/700P : 16 bar
DN800/1200P : 10 bar
T : 120°C
2702923243603804544905787117678709411188136015501780196021502520
16182533416181124182240332465615101013461836243635905260
4050658010012515020025030035040050060070080090010001200
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page6
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
7
MatériauxMaterials
DNPoids
Weight
mm
L
kg
Conditions de servicePressure
Temperature
V 3202 Vanne à passage direct - tige montante - corps fonte - PN10Gate valve - rising stem - body cast iron - PN10Corps : fonte Ft 25
Chapeau : fonte Ft 25
Contacts d'étanchéité : alliage cuivreux
Tige : acier inox
Raccordement : à brides PN10
Avec réducteur manuel à partir du DN800
Options : tige laiton, contacts d'étanchéité inox
Body: cast iron GG25
Bonnet: cast iron GG25
Tight: brass
Stem: stainless steel
Ends: flanged PN10
With manual gear box from DN800
Options: brass stem, stainless steel tightness
140150170180190200210230250270290310350390430470550630
DN40/150P : 10 bar
DN200/300P : 6 bar
DN350/500P : 4 bar
DN600P : 2.5 bar
T : 120°C
305318330340437544613765890106012001310162019202250
---
3453783954255436797789801154137515701730214025402950
---
12.515.018.325.033.049.050.071.0102.0140.0203.0256.0395.0538.0900.0
---
4050658010012515020025030035040050060070080010001200
RéférenceReference
Vannes à passage directRobinets à papillon
Gate valvesButterfly valves
mm mm
HVanne fermée Closed valve
Vanne ouverte Opened
valve
V 3246 Vanne à passage direct - tige non montante - fonte GS - PN16Gate valve - non rising stem - ductile iron - PN16Corps : fonte GS
Chapeau : fonte GS
Contacts d'étanchéité :alliage cuivreux sur fonte
Raccordement : à brides PN16
Option : contact d'étanchéité inox
Nota : existe en version tige montante
Body: ductile iron
Bonnet: ductile iron
Tight: copper alloy on cast iron
Ends: flanged PN16
Option: stainless steel tight
Please note: exist with rising stem
140150170180190200210230250270290310350
T : –10 / 150°C
P : 16 bar
2702923243603804544905787117678709411188
81014182229356290117162211340
40506580100125150200250300350400500
V 3203 Vanne à passage direct ISO - tige non montante - fonte - PN10 - NFGate valve ISO - non rising stem - cast iron - PN10 - french standardCorps : fonte
Chapeau : fonte
Contacts d'étanchéité : alliage cuivreux sur fonte
Tige : laiton
Joints : éthylène - propylène
Raccordement :à brides PN10
Options : tige et contact d'étanchéité inox, doubleopercule
Body: cast iron
Bonnet: cast iron
Tight: copper alloy on cast iron
Stem: brass
Gaskets : ethylene - propylene
Ends: flanged PN10
Options: stainless steel stem and tight, doublewedge
130136142154160172186200228
P : 10 barT : 220°C
192207236285309336403449569
6.68.09.813.916.221.431.440.471.0
3240506580100125150200
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page7
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
8
MatériauxMaterials
DNPoids
Weight
mm
L
kg
Conditions de servicePressure
Temperature
V 3204 Vanne à passage direct ISO - tige montante - fonte - PN10 - NFGate valve ISO - rising stem- cast iron - PN10 - french standardCorps : fonte
Chapeau : fonte
Contacts d'étanchéité :alliage cuivreux
Tige extérieure : laiton
Douille, écrou : alliage cuivreux
Raccordement : à brides PN10
Selon NF E 29323
Options : tige et contact d'étanchéité inox, doubleopercule
Body: cast iron
Bonnet: cast iron
Tight: copper alloy
External stem: brass
Socket nut: copper alloy
Ends: flanged PN10
According to NF E 29323
Options: stainless steel stem and tight, doublewedge
130136142154160172186200228255285315340
P : 10 barT : 120°C
P : 9 barT : 150°C
P : 8.4 barT : 180°C
211224243308355419493566740918102211711360
2462702963814415226277269501188133415231775
7.28.410.414.717.223.133.243.778.0116.0160.0215.0295.0
3240506580100125150200250300350400
RéférenceReference
Vannes à passage directRobinets à papillon
Gate valvesButterfly valves
mm mm
HVanne fermée Closed valve
Vanne ouverte Opened
valve
V 5250 Vanne à passage direct - tige montante - PN25Gate valve - rising stem - PN25Corps : acier moulé au carbone GS-C 25
Chapeau : acier moulé au carbone GS-C 25
Opercule : acier moulé GS-C 25
Contact d'étanchéité : acier inox
Tige : acier inox
Raccordement :à brides PN25
Body: cast steel GS-C 25
Bonnet: cast steel GS-C 25
Wedge: cast steel GS-C 25
Tight: stainless steel
Stem: stainless steel
Ends: flanged PN25
240250270280300325350400450500550600700800900100012001400
P : 25 barT : 120°C
P : 20 barT : 250°C
P : 13 barT : 400°C
3153304054625106156608201040106012701425179019902420275038504450
34035043048063073088010401300139016301835230026003130356048605660
18.024.538.546.557.080.0112.0178.0300.0420.0545.0730.01150.01630.02450.04840.06670.07350.0
4050658010012515020025030035040050060070080010001200
V 5262 Vanne à passage direct - tige montante - PN40Gate valve - rising stem - PN40Corps : acier moulé GS - C 25
Chapeau : acier moulé GS - C 25
Opercule : acier mouléGS - C 25
Contacts d'étanchéité :inox AISI 304
Tige : inox AISI 420
Raccordement : à brides PN40
Body: cast steel GS - C 25
Bonnet: cast steel GS - C 25
Wedge: cast steel GS - C 25
Tight: stainless steel AISI 304
Stem: stainless steel AISI 420
Ends: flanged PN40
2402502903103504004505506507508509501150
P : 40 barT : 120°C
P : 35 barT : 200°C
P : 28 barT : 300°C
P : 21 barT : 400°C
P : 19 barT : 425°C
3253494304655106156608209641060128014501790
370400520570630730880104012351390164018602300
18.024.539.047.059.080.0138.0198.0312.0392.0710.01223.01750.0
40506580100125150200250300350400500
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page8
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
9
MatériauxMaterials
DNPoids
Weight
mm
L
kg
Conditions de servicePressure
Temperature
V 5271 Vanne à passage direct - tige montante - PN64Gate valve - rising stem - PN64Corps : acier moulé GS - C 25
Chapeau : acier moulé GS - C 25
Opercule : acier moulé GS - C 25
Contacts d'étanchéité : inox AISI 304
Tige : inox AISI 420
Raccordement : à brides PN64
Body: cast steel GS - C 25
Bonnet: cast steel GS - C 25
Wedge: cast steel GS - C 25
Tight: stainless steel AISI 304
Stem: stainless steel AISI 420
Ends: flanged PN64
24025029031035040045055065075085095011501350
P : 64 barT : 120°C
P : 50 barT : 200°C
P : 45 barT : 250°C
P : 40 barT : 300°C
P : 36 barT : 350°C
P : 32 barT : 400°C
P : 30 barT : 425°C
P : 28 barT : 450°C
325344430465520615750910101010601320152017902080
3704005205706407309101130127013901670188021902530
2130424967140214290445480850134524704150
40506580100125150200250300350400500600
V 6200 Vanne à passage direct - tige montante - PN10Gate valve - rising stem - PN10Corps : acier inox 316
Chapeau : acier inox 316
Opercule : acier inox 316
Contacts d'étanchéité : acier inox
Tige : acier inox
Raccordement :à brides PN10
Body: stainless steel 316
Bonnet: stainless steel 316
Wedge: stainless steel 316
Tight: stainless steel
Stem: stainless steel
Ends: flanged PN10
140150170180190200210230250
P : 10 barT : 200°C
P : 8 barT : 300°C
P : 6 barT : 400°C
285290345365440495560725885
3453604304605606357309501160
14.019.028.031.041.058.068.5110.0155.0
40506580100125150200250
RéférenceReference
Vannes à passage directRobinets à papillon
Gate valvesButterfly valves
mm mm
HVanne fermée Closed valve
Vanne ouverte Opened
valve
V 3240 Vanne à siège oblique - tige non montante - PN16Seat gate valve - non rising stem - PN16Corps : fonte Ft 25
Chapeau : fonte Ft 25
Contacts d'étanchéité :laiton/fonte
Raccordement : à brides PN16
Body: cast iron GG25
Bonnet: cast iron GG25
Tight: brass/cast iron
Ends: flanged PN16
190200215230250275300350400425
P : 16 barT : 120°C
P : 14.4 barT : 150°C
P : 13.4 barT : 180°C
P : 12.8 barT : 200°C
P : 11.8 barT : 230°C
207236285309336403449569690755
9.010.216.019.225.136.150.983.8135.0180.0
40506580100125150200250300
V 3241 Vanne à siège oblique - tige non montante - PN16Seat gate valve - non rising stem - PN16Corps : fonte Ft 25
Chapeau : fonte Ft 25
Contacts d'étanchéité :alliage cuivreux
Raccordement : à brides PN16
Body: cast iron GG25
Bonnet: cast iron GG25
Tight: copper alloy
Ends: flanged PN16
190200215230250275300350400425
P : 16 barT : 120°C
P : 14.4 barT : 150°C
P : 13.4 barT : 180°C
207236285309336403449569690755
9.010.216.019.225.136.150.983.8135.0180.0
40506580100125150200250300
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page9
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
10
MatériauxMaterials
DNPoids
Weight
mm
L
kg
Conditions de servicePressure
Temperature
V 3242 Vanne à siège oblique - tige non montante - PN16Seat gate valve - non rising stem - PN16Corps : fonte Ft 25
Chapeau : fonte Ft 25
Contacts d'étanchéité :inox
Raccordement :à brides PN16
Body: cast iron GG25
Bonnet: cast iron GG25
Tight: stainless steel
Ends: flanged PN16
190200215230250275300350400425
P : 16 barT : 120°C
P : 14.4 barT : 150°C
P : 13.4 barT : 180°C
207236285309336403449569690755
9.010.216.019.225.136.150.983.8135.0180.0
40506580100125150200250300
V 3243 Vanne à siège oblique - tige montante - PN16Seat gate valve - rising stem - PN16Corps : fonte Ft 25
Chapeau : fonte
Contacts d'étanchéité :laiton/fonte
Raccordement : à brides PN16
Body: cast iron GG25
Bonnet: cast iron
Tight: brass/cast iron
Ends: flanged PN16
190200215230250275300350400425
P : 16 barT : 120°C
P : 14.4 barT : 150°C
P : 13.4 barT : 180°C
P : 12.8 barT : 200°C
P : 11.8 barT : 230°C
2242433083554194935667409181022
27029638144152262772695011881334
9.411.917.020.427.239.052.093.0145.0186.0
40506580100125150200250300
RéférenceReference
Vannes à passage directRobinets à papillon
Gate valvesButterfly valves
mm mm
HVanne fermée Closed valve
Vanne ouverte Opened
valve
V 3244 Vanne à siège oblique - tige montante - PN16Seat gate valve - rising stem - PN16Corps : fonte Ft 25
Chapeau : fonte
Contacts d'étanchéité : alliage cuivreux
Raccordement : à brides PN16
Body: cast iron GG25
Bonnet: cast iron
Tight: copper alloy
Ends: flanged PN16
190200215230250275300350400425
P : 16 barT : 120°C
P : 14.4 barT : 150°C
P : 13.4 barT : 180°C
2242433083554194935667409181022
27029638144152262772695011881334
40506580100125150200250300
V 3245 Vanne à siège oblique - tige montante - PN16Seat gate valve - rising stem - PN16Corps : fonte Ft 25
Chapeau : fonte
Contacts d'étanchéité :inox
Raccordement : à brides PN16
Body: cast iron GG25
Bonnet: cast iron
Tight: stainless steel
Ends: flanged PN16
190200215230250275300350400425
P : 16 barT : 120°C
P : 14.4 barT : 150°C
P : 13.4 barT : 180°C
2242433083554194935667409181022
27029638144152262772695011881334
40506580100125150200250300
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page10
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
11
MatériauxMaterials
DNPoids
Weight
mm
L
kg
Conditions de servicePressure
Temperature
V 5247 Vanne à siège oblique - tige montante - PN16Seat gate valve - rising stem - PN16Corps : acier GS-C 25
Chapeau : acier GS-C 25
Contacts d'étanchéité : inox
Garniture presse-étoupe : fibre de verre graphitée
Raccordement :à brides PN16
Body: cast steel GS-C 25
Bonnet: cast steel GS-C 25
Tight: stainless steel
Packing: graphited fiber glass
Ends: flanged PN16
250270280300325350400450500550600700800
P : 16 barT : 120°C
P : 13 barT : 200°C
P : 11 barT : 250°C
P : 10 barT : 300°C
407395455510585640810104011201270142017901990
4624605506207258001025131014401650188523102635
2832455578961582303403955658801245
506580100125150200250300350400500600
RéférenceReference
Vannes à passage directRobinets à papillon
Gate valvesButterfly valves
mm mm
HVanne fermée Closed valve
Vanne ouverte Opened
valve
V 5241 Vanne à siège parallèle - libre dilatation - tige montante - PN16Gate valve - parallel seat with spring - rising stem - PN16Corps : acier A 480 CP-M
Chapeau : acier A 42 FP
Contacts d'étanchéité :inox/stellite
Tige : acier inox Z 20 C 13
Raccordement : à brides PN16
Selon NF E 29 305 : de DN15 à DN40
Selon NF E 29 327 :de DN50 àDN400
Body: steel A 480 CP-M
Bonnet: steel A 42 FP
Tight: stainless steel/ stellite
Stem: stainless steel Z 20 C 13
Ends: flanged PN16
According to NF E 29 305:DN15 up to DN40
According to NF E 29 327: DN50 up to DN400
150160160180190200215230250275300350400425475525
P : 16 barT : 120°C
P : 6 barT : 425°C
SelonAccording to NF E 29 005
2102202452653103903904876016018199741197140315561750
4.35.27.511.013.017.020.032.042.050.076.0120.0186.0262.0355.0480.0
1520253240506580100125150200250300350400
V 5242 Vanne à siège parallèle - libre dilatation - tige montante - PN20Gate valve - parallel seat with spring - rising stem - PN20Corps : acier A 480 CP-M
Chapeau : acier A480 CP-M
Contacts d'étanchéité :inox/stellite
Tige : acier inox Z 20 C 13
Raccordement : à brides PN20
Selon NF E 29 327
Body: steel A 480 CP-M
Bonnet: steel A 480 CP-M
Tight: stainless steel/ stellite
Stem: stainless steel Z 20 C 13
Ends: flanged PN20
According to NF E 29 327
178203229267292330356381406
P : 20 barT : 40°C
P : 6 barT : 425°C
SelonAccording to NF E 29 005
3904876018199741197140315561750
17314475112190255345460
5080100150200250300350400
V 5251 Vanne à siège parallèle - libre dilatation - tige montante - PN25 Gate valve - parallel seat with spring - rising stem - PN25Corps : acier A 480 CP-M
Chapeau : acier A 42 FP
Contacts d'étanchéité : stellite/stellite
Tige : acier inox Z 20 C 13
Raccordement : à brides PN25
Selon NF E 29 305 :de DN15 à DN40
Selon NF E 29 327 :de DN50 à DN400
Body: steel A 480 CP-M
Bonnet: steel A 42 FP
Tight: stellite/stellite
Stem: stainless steel Z 20 C 13
Ends: flanged PN25
According to NF E 29 305: DN15 up to DN40
According to NF E 29 327:DN50 up to DN400
140152210230240250270280300350375425450500550600
P : 25 barT : 120°C
P : 9 barT : 425°C
SelonAccording to NF E 29 005
2102202452653103903904876016018199741197140315561750
4.35.27.511.013.019.022.033.048.052.085.0132.0208.0285.0387.0525.0
1520253240506580100125150200250300350400
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page11
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
12
MatériauxMaterials
DNPoids
Weight
mm
L
kg
Conditions de servicePressure
Temperature
RéférenceReference
V 5260 Vanne à siège parallèle - libre dilatation - tige montante - corps acier - PN40Gate valve - parallel seat with spring - rising stem - body cast steel - PN40Corps : acier A 480 CP-M
Chapeau : acier A42 FP
Contacts d'étanchéité : stellite
Tige : acier inox Z 20 C 13
Raccordement : à brides PN40
Selon NF E 29 305 : de DN15 à DN40
Selon NF E 29 327 : de DN50 à DN400
Body: steel A 480 CP-M
Bonnet: steel A 42 FP
Tight: stellite
Stem: stainless steel Z 20 C 13
Ends: flanged PN40
According to NF E 29 305: DN15 up to DN40
According to NF E 29 327: DN50 up to DN400
140152210230240250270280300350375425450500550600
P : 40 barT : 120°C
P : 16 barT : 425°C
SelonAccording to NF E 29 005
21022024526531041241251863763788310401260149416301850
4.35.27.511.013.022.024.042.056.062.0112.0200.0292.0433.0590.0802.0
1520253240506580100125150200250300350400
V 5263 Vanne à siège parallèle - libre dilatation - tige montante - corps acier - PN50Gate valve - parallel seat with spring - rising stem - body cast steel - PN50Corps : acier A 480 CP-M
Chapeau : acier A480 CP-M
Contacts d'étanchéité : stellite
Tige : acier inox Z 20 C 13
Raccordement : à brides PN50
Selon NF E 29 327
Body: steel A 480 CP-M
Bonnet: steel A 480 CP-M
Tight: stellite
Stem: stainless steel Z 20 C 13
Ends: flanged PN50
According to NF E 29 327
216283305403419457502762838
P : 50 barT : 40°C
P : 28 barT : 425°C
SelonAccording to NF E 29 005
41251863788310401260149416301850
234256138200316474684840
5080100150200250300350400
V 5270 Vanne à siège parallèle - tige montante - libre dilatation - PN64Gate valve - parallel seat with spring - rising stem - PN64 Corps : acier A 480 CP-M
Chapeau : acier A 480 CP-M
Contacts d'étanchéité : stellite
Tige : acier inox Z 20 C 13
Raccordement : à brides PN64
Selon NF E 29 331
Body: steel A 480 CP-M
Bonnet: steel A 480 CP-M
Tight: stellite
Stem: stainless steel Z 20 C 13
Ends: flanged PN64
According to NF E 29 331
300340360400450500600700800
P : 64 barT : 110°C
P : 25 barT : 425°C
SelonAccording to NF E 29 005
412412518637637883104012601494
2936496975148260377550
506580100125150200250300
Vannes à passage directRobinets à papillon
Gate valvesButterfly valves
mm mm
HVanne fermée Closed valve
Vanne ouverte Opened
valve
V 5281 Vanne à siège parallèle - tige montante - libre dilatation - PN100Gate valve - parallel seat with spring - rising stem - PN100Corps : acier A 480 CP-M
Chapeau : acier A 480 CP-M
Contacts d'étanchéité : stellite
Tige : acier inox Z 20 C 13
Raccordement : à brides PN100
Selon NF E 29 327
Body: steel A 480 CP-M
Bonnet: steel A 480 CP-M
Tight: stellite
Stem: stainless steel Z 20 C 13
Ends: flanged PN100
According to NF E 29 327
292330356432508559660787838889991
P : 100 barT : 40°C
P : 55 barT : 425°C
SelonAccording to NF E 29 005
41241251863763788310401260149416301850
26.535.054.086.0100.0178.0295.0463.0637.0780.01100.0
506580100125150200250300350400
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page12
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
13
MatériauxMaterials
DNPoids
Weight
mm
L
kg
mm
Conditions de servicePressure
Temperature
VM 3200 Vanne à manchon - à volant / Pinch valve - with handwheelCorps : fonte Ft 25
Manchon : gomme naturelle anti-abrasion
Raccordement : à brides PN10
Autre construction : corps aluminium
Autres qualités de manchon : IIR (typeButyl, EPDM, CR (typeNéoprène®), silicone, CSM (type Hypalon®), FPM(type Viton®)
Body: cast iron GG25
Sleeve: naturel rubber anti-abrasion
Ends: flanged PN10
Other construction: aluminium body
Others sleeves quality: IIR (type Butyl®), EPDM, CR(type Neoprene®), silicon,CSM (type Hypalon®), FPM (type Viton®)
7392107118130154176206215275300330375
T max. : 80°C
DN10/65P : 4 bar
DN80/200P : 3 bar
100115150160178212233260280330415445550
626284102110140160205225275325360450
1.01.53.03.65.68.010.315.018.026.640.051.072.0
101520253240506580100125150200
VM 3205 Vanne à manchon - à vérin simple effet NOPneumatic pinch valve - normally openedCorps : fonte Ft 25
Manchon : gomme naturelle anti-abrasion
Raccordement : à brides PN10
Autre construction : corps aluminium
Autres qualités de manchon : IIR (typeButyl, EPDM, CR (typeNéoprène®), silicone, CSM (type Hypalon®), FPM(type Viton®)
Body: cast iron GG25
Sleeve: naturel rubber anti-abrasion
Ends: flanged PN10
Other construction: aluminium body
Others sleeves quality: IIR (type Butyl®), EPDM, CR(type Neoprene®), silicon,CSM (type Hypalon®), FPM (type Viton®)
95106115140160190196260280300350
T max. : 80°C
DN20/65P : 4 bar
DN80/200P : 3 bar
150160178212233260280330415445550
5.06.08.012.213.621.023.036.052.065.094.5
20253240506580100125150200
VM 3206 Vanne à manchon - à vérin simple effet NFPneumatic pinch valve - normally closedCorps : fonte Ft 25
Manchon : gomme naturelle anti-abrasion
Raccordement : à brides PN10
Autre construction : corps aluminium
Autres qualités de manchon : IIR (typeButyl, EPDM, CR (typeNéoprène®), silicone, CSM (type Hypalon®), FPM(type Viton®)
Body: cast iron GG25
Sleeve: naturel rubber anti-abrasion
Ends: flanged PN10
Other construction: aluminium body
Others sleeves quality: IIR (type Butyl®), EPDM, CR(type Neoprene®), silicon,CSM (type Hypalon®), FPM (type Viton®)
95106115140160190196260280300350
T max. : 80°C
DN20/65P : 4 bar
DN80/200P : 3 bar
3604404755355656707207408308671050
5.28.011.015.019.028.033.038.054.066.095.0
20253240506580100125150200
Vannes à passage directRobinets à papillon
Gate valvesButterfly valves
mm mm
HVanne fermée Closed valve
Vanne ouverte Opened
valve
RéférenceReference
LargeurLength
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page13
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
14
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
VM 8200 Vanne à manchon pneumatique - brides PN10Pneumatic pinch valve - flanged PN10Corps et brides : fonte d'aluminium
Manchon : gomme naturelle anti-abrasion
Raccordement : à brides PN10
Pression maximum de commande : 6 bar
Pression différentielle : 1,5 à 2 bar
Body and flanges:aluminium
Sleeve: natural rubber anti-abrasion
Ends: flanged PN10
Maximal pressure of operating: 6 bar
Maximal differential pressure: 1.5 to 2 bar
155183183227281350420555610
T : –40/ +80°C
DN40/1506 bar
DN2004 bar
DN2502.5 bar
75.082.592.5100.0110.0125.0142.5170.0195.0
1/4"1/4"1/4"1/4"1/4"1/4"1/4"1/4"1/4"
0.200.250.401.101.302.604.9015.0030.00
3.23.55.06.08.012.017.035.0
-
40506580100125150200250
VM 3202 Vanne à manchon pneumatique - brides PN10Pneumatic pinch valve - flanged PN10Corps : fonte d'aluminium
Brides : fonte
Manchon : gomme naturelle anti-abrasion
Raccordement : à brides PN10
Pression maximum de commande : 6 bar
Pression différentielle : 1,5 à 2 bar
Body: aluminium
Flanges: cast iron
Sleeve: natural rubber anti-abrasion
Ends: flanged PN10
Maximal operating pressure: 6 bar
Maximal differential pressure: 1.5 to 2 bar
155183183227281350420555610
T : –40/ +80°C
DN40/1506 bar
DN2004 bar
DN2502.5 bar
75.082.592.5100.0110.0125.0142.5170.0195.0
1/4"1/4"1/4"1/4"1/4"1/4"1/4"1/4"1/4"
0.200.250.401.101.302.604.9015.0030.00
--
8.29.3-
17.525.051.084.0
40506580100125150200250
mm
Raccord Connec -
tion
Air Air
litre/ liter
Volume RéférenceReference
Nota. Autres qualités de manchons : CR (type Néoprène®), gomme alimentaire, EPDM, FPM (type Viton®), silicone, nitrile,CSM (type Hypalon®), IIR (type Butyl®), ECO.Please note. Others sleeves: CR (type Neoprene®), natural rubber food, EPDM, FPM (type Viton®), silicon, nitril (NBR), CSM (type Hypalon®), IIR (type Butyl®), ECO.
Vannes à passage directRobinets à papillon
Gate valvesButterfly valves
VM 9100 Vanne à manchon pneumatique - femelle gaz / Pneumatic pinch valve - female BSPCorps : PVC
Manchon : gomme naturellle anti-abrasion
Raccordement : POM taraudage gaz
Nota : autres constructions acier, inox, aluminium,POM
Body: PVC
Sleeve: naturel rubber anti-abrasion
Ends: POM female threaded BSP
Please note: others constructions cast steel,stainless steel, aluminium,POM
122134140145169200213
P max. : 6 bar 4660607585101120
1/8"1/4"1/4"1/4"1/4"1/4"1/4"
0.190.350.370.560.751.342.00
3/8"1/2"3/4"1"
1"1/41"1/2
2"
L
H
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page14
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page15
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
16
L
H2Robinets Globe valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
R 2140 Robinet à soupape - manchons taraudés - PN16Globe valve - screwed ends (female) - PN16Corps : bronze ASTM B 62
Chapeau : laiton
Siège : métal/métal
Tige : laiton
Joint de chapeau : fibre
Raccordement :taraudage gaz
Body: bronze ASTM B 62
Bonnet: brass
Tight contact : metal/metal
Stem: brass
Gasket bonnet: fiber
Ends: female threaded BSP
4650505564738490150167190
P : 13.5 barT : 120°C
P : 16 barT : 100°C 64
6464698299107120175192215
7171717894111126142211232265
0.180.180.200.300.400.600.901.204.305.107.80
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
mm
H-vannefermée Closedvalve
mm
H-vanneouverte Opened
valve
R 2148 Robinet à soupape - manchons taraudés - PN20Globe valve - screwed ends (female) - PN20Corps : bronze
Chapeau : laiton
Clapet : laiton
Siège : PTFE
Tige : laiton
Raccordement :taraudage gaz
Body: bronze
Bonnet: brass
disc: brass
Tight contact : PTFE
Stem: brass
Ends: female threaded BSP
505564738490
P : 20 barT : 100°C
64698299107120
717894111126142
0.200.300.400.600.901.20
1/2"3/4"1"
1"1/41"1/2
2"
mm
H-vannefermée Closedvalve
mm
H-vanneouverte Opened
valve
R 2143 Robinet à soupape - manchons taraudés - chapeau unionGlobe valve - screwed ends (female) - union bonnetCorps : bronze ASTM B 62
Chapeau : laiton
Clapet : inox
Tige : laiton
Joint de chapeau :graphite
Raccordement : taraudage gaz
Body: bronze ASTM B 62
Bonnet: brass
Disc: stainless steel
Stem: brass
Gasket bonnet: graphite
Ends: female threaded BSP
464656627491100128
T max. : 180°C
Eau froideCold water P : 25 bar
Vapeur saturée
Saturatedsteam
P : 10 bar
100100105135150170195220
0.300.300.360.881.001.481.652.85
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
R 2149 Robinet à soupape - manchons taraudés - modèle équerre - PN16Globe valve angle form - screwed ends (female) - PN16Corps : bronze
Chapeau : bronze
Clapet : PTFE
Raccordement : taraudage gaz
Body: bronze
Bonnet: bronze
Disc: PTFE
Ends: female threaded BSP
31343541465562728095113
P : 16 barT : 100°C
6770728795110120145205220245
0.260.300.310.500.851.201.502.504.706.009.80
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
RéférenceReference
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page16
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
17
Robinets Globe valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
R 2145 Robinet à soupape - manchons taraudés - chapeau unionGlobe valve - screwed ends (female) - union bonnetCorps : bronze ASTM B 62
Chapeau : laiton
Clapet : PTFE
Tige : laiton
Joint de chapeau : graphite
Raccordement :taraudage gaz
Body: bronze ASTM B 62
Bonnet: brass
Disc: PTFE
Stem: brass
Gasket bonnet: graphite
Ends: female threaded BSP
464656627491100128
100100105135150170195220
0.300.300.360.881.001.481.652.85
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
R 6150 Robinet à soupape - inox - manchons taraudésGlobe valve - stainless steel - screwed ends Corps : inox 316
Chapeau : inox 316
Clapet : inox 316
Tige : inox 316
Etanchéité : métal/métal
Raccordement :taraudage gaz
Body: stainless steel 316
Bonnet: stainless steel 316
Disc: stainless steel 316
Stem: stainless steel 316
Tight: metal/metal
Ends: female threaded BSP
57657787100110
P : 16 barT : 180°C
8895116129130154
0.60.81.31.82.64.1
1/2"3/4"1"
1"1/41"1/2
2"
R 2240 Robinet à soupape - chapeau union - à tige montante - à brides PN20Globe valve - union bonnet - rising stem - flanged PN20Corps : bronze
Chapeau : bronze
Clapet : bronze
Raccordement : à brides PN10/16
Options : corps cupro-alu, perçage spécial, étanchéité inox, PTFE
Body: bronze
Bonnet: bronze
Disc: bronze
Ends: flanged PN10/16
Options: body cupro-alu, special flange connection,tight stainless steel, PTFE
100110125140160185185
P max. : 32 bar
T max. : 260°C
VapeurSteam
P : 16 bar
120155170190215250250
2.052.983.936.358.2010.8011.70
15202532405065
R 2241 Robinet à soupape - chapeau union - à tige montante - à brides PN10 Globe valve - union bonnet - rising stem - flanged PN10Corps : bronze
Chapeau : bronze
Clapet : bronze
Raccordement : à brides PN10/16
Option : étanchéité PTFE
Body: bronze
Bonnet: bronze
Disc: bronze
Ends: flanged PN10/16
Option: tight PTFE
80808092102118140160190244
T max. : 180°C
Eau froideCold waterP : 25 bar
Vapeur saturéeSteam
P : 14 bar
130130135150170195220230250370
1.851.902.002.503.103.786.609.1012.5023.20
101520253240506580100
RéférenceReference
T max. : 180°C
Eau froideCold waterP : 25 bar
Vapeur saturée
Saturatedsteam
P : 10 bar
L
H2
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page17
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
18
Robinets Globe valves
RéférenceReference
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
R 3240 Robinet à soupape à brides parallèles - ISO PN16Globe valve with parallel flanges - ISO PN16Corps : fonte Ft 25
Chapeau : fonte Ft 25
Clapet : inox
Tige : inox
Raccordement : à brides PN16
Option : à brides PN10
Body: cast iron GG25
Bonnet: cast iron GG25
Disc: stainless steel
Stem: stainless steel
Ends: flanged PN16
Option: flanged PN10
130150160180200230290310350400480600730850
P : 16 barT : 120°C
P : 13.6 barT : 180°C
P : 12 barT : 225°C
173182185207228255272305360390470500685786
183192200227250285312355430445528580770886
4.505.506.007.6012.0014.0020.0026.0035.0056.0076.50150.00230.00340.00
1520253240506580100125150200250300
mm
H-vannefermée Closedvalve
mm
H-vanneouverte Opened
valve
R 5240 Robinet à soupape à brides parallèles - ISO PN25 et PN40 Globe valve with parallel flanges - ISO PN25 and PN40Corps : acier moulé
Chapeau : acier moulé
Clapet : inox
Tige : inox
Raccordement : à brides PN25 et PN40
Body: carbon steel
Bonnet: carbon steel
Disc: stainless steel
Stem: stainless steel
Ends: flanged PN25 and PN40
130150160180200230290310350400480
600730850
600730850
PN40
P : 40 barT : 120°C
P : 28 barT : 300°C
P : 21 barT : 400°C
PN25
P : 25 barT : 120°C
P : 17 barT : 300°C
P : 13 barT : 400°C
190195204228257270323365410465560
610820945
6109001050
200205217245277295356405459520610
6708851020
6709751140
25/4025/4025/4025/4025/4025/4025/4025/4025/4025/4025/40
252525
404040
5.005.507.0011.0014.5018.0029.5038.5054.5074.00105.00
200.00302.00440.00
210.00340.00480.00
1520253240506580100125150
200250300
200250300
mm
H-vannefermée Closedvalve
mm
H-vanneouverte Opened
valvemm
PN
R 5281 Robinet à soupape à brides parallèles - ISO PN100 Globe valve with parallel flanges - ISO PN100Corps : acier moulé
Chapeau : acier moulé
Clapet : inox
Tige : inox
Raccordement : à brides PN100
Option : à brides PN64, PN160
Body: carbon steel
Bonnet: carbon steel
Disc: stainless steel
Stem: stainless steel
Ends: flanged PN100
Option: flanged PN64, PN160
210220230250260300340380430500550650775900
P : 92.8 bar T : 100°C
P : 87.6 bar T : 200°C
P : 77.5 bar T : 300°C
P : 69 bar T : 400°C
P : 17.6 bar T : 500°C
260285300325365385405420460520600660730950
10.0016.0018.0020.0028.0034.0055.0067.0095.00142.00170.00297.00470.00758.00
1520253240506580100125150200250300
L
H2
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page18
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
19
Robinets Globe valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
R 6201 Robinet à soupape - tout inox - modèle droit PN16 Globe valve - stainless steel - straight type - PN16 Corps : inox 316
Chapeau : inox 316
Clapet : inox
Tige : inox
Raccordement : à brides PN16
Autres PN possibles : PN40, 64, 100
Body: stainless steel 316
Bonnet: stainless steel 316
Disc: stainless steel
Stem: stainless steel
Ends: flanged PN16
Others PN possible :PN40, 64, 100
130150160180200230290310350400480600730
P : 16 barT : 120°C
P : 14 barT : 200°C
P : 14 barT : 300°C
200210225235250265320345395450490545755
4.505.507.009.2011.3018.0022.0031.0050.0065.0080.00160.00240.00
1520253240506580100125150200250
R 3243 Robinet à soufflet - fonte grise - à brides PN16 Globe bellow valve - cast iron - flanged PN16 Corps : fonte Ft 25
Chapeau : fonte Ft 25
Soufflet : inox
Clapet : inox
Joint de corps : graphite
Raccordement :à brides PN16
Body: cast iron GG25
Bonnet: cast iron GG25
Bellow: stainless steel
Disc: stainless steel
Gasket: graphite
Ends: flanged PN16
130150160180200230290310350400480600730
P : 16 barT : 120°C
P : 13 barT : 200°C
P : 11 barT : 250°C
P : 10 barT : 300°C
157165182191214234286331350384450510650
2.803.504.606.207.8011.0018.0023.0033.0043.0064.00103.00201.00
1520253240506580100125150200250
R 4243 Robinet à soufflet - fonte GS - à brides PN16Globe bellow valve - ductile iron - flanged PN16Corps : fonte GS
Chapeau : fonte GS
Soufflet : inox
Clapet : inox
Joint de corps : graphite
Raccordement : à brides PN16
Option : à brides PN25
Body: ductile iron
Bonnet: ductile iron
Bellow: stainless steel
Disc: stainless steel
Gasket: graphite
Ends: flanged PN16
Option: flanged PN25
130150160180200230290310350400480600730
P : 16 barT : 120°C
P : 13 barT : 200°C
P : 11 barT : 250°C
P : 10 barT : 300°C
P : 8 barT : 350°C
157165182191214234286331350384450510650
2.803.504.606.207.8011.0018.0023.0033.0043.0064.00103.00201.00
1520253240506580100125150200250
R 5263 Robinet à soufflet - acier - à brides PN40 Globe bellow valve - cast steel - flanged PN40Corps : acier moulé.
Chapeau : acier moulé
Soufflet : inox
Clapet : inox
Joint de corps : graphite
Raccordement :à brides PN40
Option : corps et chapeau inox 316
Body: cast steel
Bonnet: cast steel
Bellow: stainless steel
Disc: stainless steel
Gasket: graphite
Ends: flanged PN40
Option: body and bonnet stainless steel 316
130150160180200230290310350400480600730
P : 40 barT : 120°C
P : 35 barT : 200°C
P : 32 barT : 250°C
P : 28 barT : 300°C
P : 24 barT : 350°C
P : 21 barT : 400°C
230233240248277287373377410458516633785
4.805.406.809.3012.9015.6027.0031.0045.0070.0099.00188.00275.00
1520253240506580100125150200250
L
H2
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page19
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
20
Robinets Globe valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
R 5264 Robinet à soupape d'équerre acier - PN40Globe valve angle form carbon steel - PN40Corps : acier moulé
Chapeau : acier moulé
Clapet : inox
Tige : inox
Raccordement : à brides PN40
Body: carbon steel
Bonnet: carbon steel
Disc: stainless steel
Stem: stainless steel
Ends: flanged PN40
9095100105115125145155175200225275
P : 40 barT : 20°C
P : 35 barT : 100°C
P : 32 barT : 150°C
P : 28.5 barT : 200°C
P : 23.4 barT : 300°C
P : 21.20 barT : 400°C
P : 20.3 barT : 425°C
170170170240250265290320350390440515
4.104.704.9010.6013.6016.0028.0037.4048.0059.575.50152.50
1520253240506580100125150200
R 6243 Robinet à soupape d'équerre inox - PN16Globe valve angle form stainless steel - PN16Corps : inox 316
Chapeau : inox 316
Clapet : inox
Tige : inox
Raccordement : à brides PN16
Body: stainless steel 316
Bonnet: stainless steel 316
Disc: stainless steel
Stem: stainless steel
Ends: flanged PN16
65758090100115145155175200240300365
P : 16 barT : 120°C
P : 14 barT : 200°C
P : 14 barT : 300°C
203215227238251267318346397451491546630
4.505.507.009.0012.0016.0022.1027.2044.0070.0092.50178.00275.00
1520253240506580100125150200250
R 3241 Robinet à soupape d'équerre fonte - PN16Globe valve angle form cast iron - PN16Corps : fonte Ft25
Chapeau : fonte Ft25
Clapet : bronze
Tige : laiton
Raccordement : à brides PN16
Body: cast iron GG25
Bonnet: cast iron GG25
Disc: bronze
Stem: brass
Ends: flanged PN16
9095100105115125145155175200225275
-
P : 16 barT : 100°C
P : 14 barT : 150°C
P : 12.5 barT : 200°C
P : 11 barT : 250°C
124131154151192192225250305340372453
-
3.103.504.606.609.0010.8015.2020.5029.5044.0060.00112.00
-
1520253240506580100125150200250
R 6200 Robinet à soupape à siège incliné tout inox - PN16 Globe valve inclined seat stainless steel - PN16 Corps : inox 316
Chapeau : inox 316
Clapet : inox
Tige : inox
Raccordement : à brides PN16
Autres PN possibles :PN40, 64, 100
Option : contact PTFE
Body: stainless steel 316
Bonnet: stainless steel 316
Disc: stainless steel
Stem: stainless steel
Ends: flanged PN16
Other PN possible:PN40, 64, 100
Option: PTFE seat
130150160180200230290310350400480600730
P : 16 barT : 120°C
P : 14 barT : 200°C
P : 13 barT : 300°C
180180199226253272320339402483543664750
2.903.303.707.608.7010.7021.0025.1534.0055.0077.00
--
1520253240506580100125150200250
L
H2
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 14:59 Page20
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
21
Robinets Globe valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
RI 3140 Robinet à piston - fonte PN16 - femelle / Piston valve - cast iron PN16 - femaleCorps : fonte Ft25
Chapeau : fonte Ft25
Piston : inox A 410
Tige : inox 13% Cr
Raccordement : femelle BSP
Option : femelle NPT
Body: cast iron GG25
Bonnet: cast iron GG25
Piston: stainless steel A 410
Stem: stainless steel 13% Cr
Ends: threaded BSP
Option: threaded NPT
100120135
P : 16 barT : 120°C
P : 10 barT : 300°C
130150175
1/2"3/4"1"
L
H2
R 6241 Robinet de fond de cuve à clapet descendant inoxStainless steel bottom drain valve with down strokeCorps : inox 316 L
Chapeau : inox 316 L
Contact d'étanchéité :métal/ métal
Raccordement : à brides PN16
Sortie : à 20°C
Options : siège PTFE, sortie à actionneur pneumatiquedouble ou simple effet,double enveloppe
Body: stainless steel
Bonnet: stainless steel
Tight: metal/ metal
Ends: flanged PN16
Outlet: to 20°C
Options: seat PTFE, pneumatic actuator doubleor single effect, jackeledbody
108108120120130180180250280
P : 16 barT : 200°C
294294310310355400430610690
77161622253080120
253240506580100150200
R 6244 Robinet de fond de cuve à clapet ascendant inoxStainless steel bottom drain valve with up strokeCorps : inox 316 L
Chapeau : inox 316 L
Contact d'étanchéité :métal/ métal
Raccordement : à brides PN16
Sortie : à 60°C
Options : siège PTFE, sortie à actionneur pneumatiquedouble ou simple effet,double enveloppe
Body: stainless steel
Bonnet: stainless steel
Tight: metal/ metal
Ends: flanged PN16
Outlet: to 60°C
Options: seat PTFE, pneumatic actuator doubleor single effect, jacketedbody
P : 16 barT : 200°C
200200220240320375400450500
678111521263859
253240506580100125150
R 6242 Robinet de fond de cuve à clapet ascendant inoxStainless steel bottom drain valve with up strokeCorps : inox 316 L
Chapeau : inox 316 L
Contact d'étanchéité :métal/métal
Raccordement : à brides PN16
Sortie à 90° jusqu'au DN100
Sortie à 17° à partir du DN150 fournie avecembase fond de cuve
Options : siège PTFE, sortie à 17° jusqu'au DN100,actionneur pneumatiquedouble ou simple effet,double enveloppe
Body: stainless steel 316L
Bonnet: stainless steel 316L
Tight: metal/metal
Ends: flanged PN16
0utlet to 90° until ND100
Outlet to 17° from ND150delivered with tank flange
Options: seat PTFE, 17° angle outlet until ND100,pneumatic actuator doubleor single effect, jacketedbody
8181149220282230290281
P : 16 barT : 200°C
284284390511552732770830
551015184565110
25325080100150200250
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:00 Page21
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
22
Robinets Globe valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
RI 3240 Robinet à piston - fonte PN16 / Piston valve - cast iron PN16Corps : fonte Ft25
Chapeau : fonte Ft25
Piston : inox A 410
Tige : inox 13% Cr
Raccordement : à brides PN16
Body: cast iron GG25
Bonnet: cast iron GG25
Piston: stainless steel A 410
Stem: stainless steel 13% Cr
Ends: flanged PN16
130150160180200230290310350400480
P : 16 barT : 120°C
P : 13 barT : 300°C
105120140155190215200225270310340
1520253240506580100125150
RI 5261 Robinet à piston - acier PN40 / Piston valve - steel PN40Corps : acier forgé A 105
Chapeau : acier forgéA 105
Piston : inox A 410
Tige : inox 13% Cr
Raccordement : à brides PN40
Option : corps et chapeau inox 316
Body: forged steel A 105
Bonnet: forged steel A 105
Piston: stainless steel A 410
Stem: stainless steel 13% Cr
Ends: flanged PN40
Option: body and bonnet stainless steel 316
130150160180200230
P : 40 barT : 120°C
P : 28 barT : 300°C
P : 21 barT : 400°C
105120140155190215
152025324050
RI 5262 Robinet à piston - acier PN40 / Piston valve - steel PN40Corps : acier moulé
Chapeau : acier moulé
Piston : inox A 410
Tige : inox 13% Cr.
Raccordement : à brides PN40
Option : corps et chapeau inox 316
Body: cast steel
Bonnet: cast steel
Piston: stainless steel A 410
Stem: stainless steel 13% Cr
Ends: flanged PN40
Option: body and bonnet stainless steel 316
290310350400480
P : 40 barT : 120°C
P : 28 barT : 300°C
P : 21 barT : 400°C
310330380450480
6580100125150
RI 5240 Robinet à piston - acier ANSI 150 / Piston valve - steel ANSI 150Corps : acier moulé A 216 WCB
Chapeau : acier moulé A 216 WCB
Piston : inox A 410
Tige : inox 13% Cr
Raccordement : à brides ANSI 150/ PN20
Body: cast steel A 216 WCB
Bonnet: cast steel A 216 WCB
Piston: stainless steel A 410
Stem: stainless steel 13% Cr
Ends: flanged ANSI 150/ PN20
203241292406
P : 18 barT : 100°C
P : 14 barT : 200°C
P : 10 barT : 300°C
P : 7 barT : 400°C
215330380480
5080100150
L
H2
RI 5260 Robinet à piston - acier ANSI 300 / Piston valve - steel ANSI 300Corps : acier moulé A 216 WCB
Chapeau : acier moulé A 216 WCB
Piston : inox A 410
Tige : inox A 410
Raccordement : à brides ANSI 300/ PN50
Body: cast steel A 216 WCB
Bonnet: cast steel A 216 WCB
Piston: stainless steel A 410
Stem: stainless steel A 410
Ends: flanged ANSI 300/ PN50
152178203228267317356445
P : 47 barT : 100°C
P : 44 barT : 200°C
P : 38 barT : 300°C
P : 29 barT : 425°C
105120140190215330380480
152025405080100150
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:00 Page22
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
23
Robinets Globe valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
RF 1100 Robinet à flotteur laiton / Brass float valveCorps : laiton
Siège : inox
Raccordement : fileté gaz
Flotteur : cuivre, PVC
Body: brass
Seat: stainless steel
Ends: male threaded BSP
Float: copper, PVC 240240320385505540660770829930
P : 10 barT : 80°C
45606595130140190445415490
8590120150180200220250300300
0,1400,1600,3150,4950,9451,4351,8954,1505,1007,950
0.0650.0750.1150.1650.2950.3350.4550.7151.1801.180
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
RF 6140 Robinet à flotteur inox / Stainless steel float valveCorps : inox 316
Piston : inox 316
Etanchéité : caoutchouc au silicone
Raccordement : fileté gaz
Flotteur : inox 316
Body: stainless steel 316
Piston: stainless steel 316
Tight: silicon rubber
Ends: male threaded BSP
Float: stainless steel 316
386418507615680610677704
P : 16 barT : 120°C
225267282327355315410420
110150150150200200200200
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
mm
ø flotteurø float
Poids du flotteurFloat
weightkgkg
Poids du robinetValve
weight
RF 3240 Robinet à flotteur compensé d'équerre fonte PN10Cast iron balanced float valve - angle form PN10Corps : fonte
Chapeau : fonte
Etanchéité : EPDM
Raccordement : à brides PN10
Flotteur : acier galvanisé ou inox
Body: cast iron
Bonnet: cast iron
Tight: EPDM
Ends: flanged PN10
Float: galvanized steel or stainless steel
115125145155175200225275
P : 10 barT : 70°C
210230245260280310350400
370370400400425425450450
20.0023.0029.0036.0045.0060.0088.00138.00
40506580100125150200
L
H2
RI 5180 Robinet à piston - acier ANSI 600 / Piston valve - steel ANSI 600Corps : acier forgé A 105
Chapeau : acier forgé A 105
Piston : inox A 410
Tige : inox 13% Cr
Raccordement : femelle BSP
Options : femelle NPT, à souder SW
Body: forged steel A 105
Bonnet: forged steel A 105
Piston: stainless steel A 410
Stem: stainless steel 13% Cr
Ends: female threaded BSP
Options: female NPT, SW
100100120135185185
P : 136 barT : 100°C
P : 130 barT : 200°C
P : 112 barT : 300°C
P : 82 barT : 400°C
130130150175230230
3/8"1/2"3/4"1"
1"1/41"1/2
RF 3241 Robinet à flotteur compensé modèle droit fonte - PN10 Cast iron balanced float valve straight type - PN10Corps : fonte
Chapeau : fonte
Etanchéité : EPDM
Raccordement : à brides PN10
Flotteur : acier galvanisé ou inox
Body: cast iron
Bonnet: cast iron
Tight: EPDM
Ends: flanged PN10
Float: galvanized steel or stainless steel
200230290310350400480600
P : 10 barT : 70°C
210230245260280310350400
370370400400425425450450
20.0023.0029.0036.0045.0060.0088.00138.00
40506580100125150200
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:00 Page23
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
24
Robinets Globe valves
RéférenceReference
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RP 2100 Robinet à pointeau bronze PN10 / Bronze needle valve PN10Corps : bronze
Chapeau : laiton
Etanchéité : laiton/bronze
Raccordement : taraudé gaz
Body: bronze
Bonnet: brass
Tight: brass/bronze
Ends: female threaded BSP
54545870
T max. : 150°C
P max. : 10 bar
75777993
0.310.290.350.57
1/4"3/8"1/2"3/4"
RP 2151 Robinet à pointeau laiton équerre avec becSquare brass needle valve with nozzleCorps : laiton
Etanchéité : inox
Joints : PTFE
Raccordement : filetage gaz - sortie à bec
Body: brass
Tight: stainless steel
Gasket: PTFE
Ends: BSP threaded - exit with nozzle
434349
P : 100 barT : 110°C
P : 20 barT : 180°C
666666
0.200.200.30
1/4"3/8"1/2"
RP 5190 Robinet à pointeau acier PN200 (3000 lbs) / Steel needle valve PN200 (3000 lbs)Corps : acier forgé A105
Fouloir : acier A105
Etanchéité : métal/métal
Joints : graphite
Raccordement : taraudé gaz
Option : raccordement femelle NPT
Body: forged carbon steel A105
Packing gland: carbon steel A105
Tight: metal/metal
Gaskets: graphite
Ends: female threaded BSP
Option: ends female threaded NPT
6060707590
T max. : 250°C
P max. : 200 bar
858598112134
0.640.620.831.041.95
1/4"3/8"1/2"3/4"1"
RP 6190 Robinet à pointeau inox PN400 / Stainless steel needle valve PN400Corps : inox 316
Chapeau : inox 316
Etanchéité : métal/métal
Joints : PTFE
Raccordement : taraudé gaz
Body: stainless steel 316
Bonnet: stainless steel 316
Tight: metal/metal
Gaskets: PTFE
Ends: female threaded BSP
4450606582
T max. : 180°C
P max. : 400 bar
6365848595
0.270.320.540.661.39
1/4"3/8"1/2"3/4"1"
L
H2
X 3100 Robinet de vidange «Perfection» - ouverture rapide / Quick draining valveDN3/4" au DN2",corps : laiton
DN2"1/2 au DN4",corps : fonte
Etanchéité : laiton
Raccordement : filetage mâle BSP
DN3/4" to DN4"body: brass
DN2"1/2 to DN4"body: cast iron
Tight: brass
Ends: male threaded BSP
170200220260300350
P : 10 barT : 100°C
0.451.301.503.855.4010.80
3/4"1"1/2
2"2"1/2
3"4"
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:00 Page24
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
25
Robinets Globe valves
RéférenceReference
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
Les robinets de réglage ROR, brevetés S.G.D.G., ont pour but de remédier par des pertes de charge appropriées, aux déséquili-brages des circuits de tous fluides.Ils remplacent, soit les diaphragmes difficiles à calculer et à modifier, soit les les robinets ordinaires qui ne sont pas conçus pourl'obtention de réglages précis et qui peuvent être déréglés par des interventions inopportunes.Peu encombrants, esthétiques, équipés d'un piston-obturateur de course importante et d'un presse-étoupe rigoureusementétanche, livrés avec une clé de manoeuvre spéciale et un cache plombable, les robinets ROR permettent un réglage progressif,précis et inviolable.
The mark of valves ROR, patented S.G.D.G., is to remedy the lack of balance in differents kind of fluids inside the cicuits.The replace either hard calculation for diaphragms or replace the ordinaries valves who are not designed for fine adjustment and easily out of order by ill-timed interventions.Little crowding, aesthetic, equiped with a piston of important stroke and with a really tight packing gland.Delivered with a special key and a plumbable hide, the ROR valves permit à progressive adjustement, fine and unconquerable.
mm
Hauteurnécessaire
Weightrequired
mm
Carré foursome
RR 5490 Robinet de réglage ROR - modèle sandwich Markof valve ROR - Wafer typeConstruction : acier
Variante : inox 316 L
Construction: carbon steel
Alternative: stainless steel
30303035354452
115120120150150220220
160160160205205300300
6667799
10152025324050
RR 5390 Robinet de réglage ROR - emmanché soudéMarkof valve ROR - Socket welding Construction : acier
Variante : inox 316 L
Construction: carbon steel
Alternative:stainless steel 316 L
49495058597084
115120120150150220220
160160160205205300300
6667799
0.790.790.951.441.733.003.76
10152025324050
RR 5391 Robinet de réglage ROR - à souder bout à bout Markof valve ROR - Butt weldingConstruction : acier
Variante : inox 316 L
Construction: carbon steel
Alternative:stainless steel 316 L
140170190210245290350380440
2653203854555307108409901210
355425510610700925110013001550
91212161924282832
6580100125150200250300350
RR 5200 Robinet de réglage ROR - à brides PN10 Markof valve ROR - Flanged PN10Construction : acier
Variante : inox 316 L
Option : à brides PN16
Construction: carbon steel
Alternative: stainless steel
Option: flanged PN16
230270294320355414486516576
355425510610700925110013001550
91212161924282832
6580100125150200250300350
L
H2
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:01 Page25
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
26
Robinets Globe valves
RéférenceReference
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RR 1140 Robinet de réglage MINI ROR - femelle gaz Markof valve MINI ROR - BSP female threadedCorps : laiton
Chapeau : laiton
Etanchéité : inox/laiton
Raccordement : taraudé gaz
Body: brass
bonnet: brass
Thight: stainless steel/brass
Ends: BSP female threaded
585862748396108
P : 15 barT : 110°C
101101101137137180180
150150150200200260260
6667799
0.600.600.711.201.712.903.30
3/8"1/2"3/4"1"
1"1/41"1/2
2"
RR 3240 Robinet de réglage MINI ROR - à brides PN16Markof valve MINI ROR - Flanged PN16Corps : fonte
Chapeau : fonte
Etanchéité : inox/fonte
Raccordement : à brides PN16
Body: cast iron
Bonnet: cast iron
Thight:stainless steel/cast iron
Ends: flanged PN16
154190210240270315370
P : 15 barT : 110°C
265320385455530710840
3554255106107009251100
9121216192428
111821355080129
6580100125150200250
R 5265 Robinet spécial chlore avec soufflet / Special chlorine valve with bellowCorps : acier ASTM A 216 Gr. WCB
Chapeau : acier ASTM A 216 Gr. WCB
Contact d'étanchéité :hastelloy-C/monel
Soufflet : hastelloy-C/monel
Raccordement : à brides ANSI 300/ PN50
Body: carbon steel ASTM A216 Gr. WCB
Bonnet: carbon steel ASTM A216 Gr. WCB
Seat: hastelloy-C/monel
Bellow: hastelloy-C/monel
Ends: flanged ANSI 300/ PN50
152178203216229267292318356444559622711
320320357390458501540641750950102011301730
81114212736475685142175215270
1520253240506580100150200250300
VS 1340 Vanne à soufflet SELFA / SELFA bellow valveCorps : inox 316 L
Chapeau : inox 316 L
Clapet : PCTFE
Raccordement : embouts à souder (BW - SW orBWO)
Autres constructions : corps laiton, clapet Vespelou metal/metal, commande pneumatique
Body: stainless steel 316 L
Bonnet: stainless steel 316 L
Disc: PCTFE
Ends: welding ends (BW - SW or BWO)
Other constructions:body brass, disc Vespel ormetal/metal, pneumaticactuator
140140140140180180250250
P : 30 bar435 psi
T : –20°C /+80°C
3030353550508080
1,51,52,12,14,84,812,212,2
1012152025324050
mm
Hauteurnécessaire
Weightrequired
mm
Carré foursome
L
H2
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:01 Page26
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:01 Page27
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
28
Soupapes de suretéDétendeurs
Safety valvesPressure reducers
MatériauxMaterials
DNSortieOutlet
PoidsWeight
mm
L1
mm kg
L2Conditions de servicePressure
Temperature
RéférenceReference
mm inch
H
SR 3140 Soupape de sûreté à ressort PN16 à levée complète avec levier de déchargeTotal lift spring safety valve PN16 with control lever of dischargeCorps : fonte FT
Etanchéité : inox
Ressort : acier spécial
Guide tige : bronze
Chapeau : fonte FT
Bouchon : fonte FT
Raccordement : taraudé gaz femelle
Option : levier étanche
Body: cast iron
Tight: stainless steel
Spring: special steel
Stem guide: bronze
Bonnet: cast iron
Cap: cast iron
Ends: female threaded BSP
Option: waterproof control lever
545454
P : 16 barT : 110°C
P : 10 barT : 180°C
717171
291291291
1"1/21"1/21"1/2
1.32.42.4
1/2"3/4"1"
SR 5150 Soupape de sûreté à ressort PN40 à levée complète avec levier de déchargeTotal lift spring safety valve PN40 with control lever of dischargeCorps : acier
Etanchéité : inox
Ressort : acier spécial
Guide tige : bronze
Chapeau : acier
Bouchon : acier
Raccordement : taraudé gaz
Option : levier étanche
Body: carbon steel
Tight: stainless steel
Spring: special steel
Stem guide: bronze
Bonnet: carbon steel
Cap: carbon steel
Ends: threaded BSP
Option: waterproof control lever
545454
P : 25 barT : 200°C
71 7171
291291291
1"1/21"1/21"1/2
1.32.42.4
1/2"3/4"1"
SR 6150 Soupape de sûreté à ressort PN40 à levée complète avec levier de déchargeTotal lift spring safety valve PN40 with control lever of dischargeCorps : inox 316
Etanchéité : inox 316
Ressort : inox 316
Guide tige : inox 316
Chapeau : inox
Bouchon : inox 316
Raccordement : taraudé gaz
Option : levier étanche
Body: stainless steel 316
Tight: stainless steel 316
Spring: stainless steel 316
Stem guide:stainless steel 316
Bonnet: stainless steel
Cap: stainless steel 316
Ends: threaded BSP
Option: waterproof control lever
545454
P : 25 barT : 200°C
71 7171
291291291
1"1/21"1/21"1/2
1.32.42.4
1/2"3/4"1"
SR 3244 Soupape de sûreté à ressort PN16 à levée complète avec levier de décharge Total lift spring safety valve PN16 with control lever of dischargeCorps : fonte
Etanchéité : inox
Ressort : acier spécial
Guide tige : bronze
Chapeau : fonte
Bouchon : acier
Raccordement : brides PN10/16
Option : levier étanche
Body: cast iron
Tight: stainless steel
Spring: special steel
Stem guide: bronze
Bonnet: cast iron
Cap: carbon steel
Ends: flanged PN10/16
Option: waterproof control lever
95100105125130160170215225
P : 16 barT : 110°C
P : 10 barT : 180°C
105115130145155180200220245
4004354555555806907308601000
40506580100125150200250
811162128456090140
253240506580100125150
L
H
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:01 Page28
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
29
MatériauxMaterials
DNSortieOutlet
PoidsWeight
mm
L1
mm kg
L2Conditions de servicePressure
Temperature
RéférenceReference
mm inch
H
SR 5250 Soupape de sûreté à ressort PN40 à levée complète avec levier de déchargeTotal lift spring safety valve PN40 with control lever of dischargeCorps : acier
Etanchéité : inox
Ressort : acier spécial inox
Guide tige : bronze
Chapeau : acier
Bouchon : acier
Raccordement : brides PN25
Option : chapeau fermé sans levier
Body: carbon steel
Tight: stainless steel
Ressort: special stainless steel
Stem guide: bronze
Bonnet: carbon steel
Cap: carbon steel
Ends: flanged PN25
Option: closed bonnetwithout lever
95100105125130160170215225
P : 25 barT : 200°C
105115130145155180200220245
4004354555555806907308601000
40506580100125150200250
8111621284560100155
253240506580100125150
SR 6250 Soupape de sûreté à ressort PN40 à levée complète avec levier de déchargeTotal lift spring safety valve PN40 with control lever of dischargeCorps : inox 316
Etanchéité : inox 316
Ressort : inox 316
Chapeau : inox 316
Raccordement : brides PN16
Option : chapeau fermé sans levier
Body: stainless steel 316
Tight: stainless steel 316
Spring: stainless steel 316
Bonnet: stainless steel 316
Ends: flanged PN16
Option: closed bonnetwithout lever
95100105125130160170
P : 25 barT : 200°C
105115130145155180200
400435455555580690730
40506580100125150
8111621284560
253240506580100
Soupapes de suretéDétendeurs
Safety valvesPressure reducers
L
H
SR 5151 Soupape de sûreté à ressort à levée simple PN40Proportional lift spring safety valve PN40Corps : acier
Etanchéité : inox
Ressort : inox 316
Guide tige : bronze
Chapeau : acier
Bouchon : acier
Raccordement : taraudé gaz
Levier : en option
Autre construction :acier inox
Body: carbon steel
Tight: stainless steel
Spring: stainless steel 316
Stem guide: bronze
Bonnet: carbon steel
Cap: carbon steel
Ends: threaded BSP
Lever: on request
Other construction: stainless steel
4042475361 65
P : 25 barT : 200°C
3538405055 55
218223227264295295
1/2"3/4"1"
1"1/41"1/2
2"
1/2"3/4"1"
1"1/41"1/2
2"
SR 3246 Soupape de sûreté à ressort à levée simple - Chapeau étanche PN16Proportional lift spring safety valve - Tight bonnet PN16Corps : fonte FT
Etanchéité : inox
Ressort : inox
Guide tige : bronze
Chapeau : fonte FT
Bouchon : acier
Raccordement : brides PN10/16
Option : chapeau fermé sans levier
Body: cast iron
Tight: stainless steel
Spring: stainless steel
Stem guide: bronze
Bonnet: cast iron
Cap: carbon steel
Ends: flanged PN10/16
Option: closed bonnetwithout lever
9396106118133145175180240
P : 16 barT : 110°C
9396106118133145175180240
335345360390500545580640715
253240506580100125150
253240506580100125150
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:01 Page29
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
30
MatériauxMaterials
DNPoids
Weight
mm
L
kg
Conditions de servicePressure
Temperature
RéférenceReference
mm
H
Soupapes de suretéDétendeurs
Safety valvesPressure reducers
L
H
SR 2140 Soupape de sûreté à échappement libre PN16Free leakage safety valve PN16Corps : bronze
Etanchéité : PTFE
Ressort : acier
Raccordement :fileté mâle gaz
Plage de réglage :3 à 8 bar
Body: bronze
Tight: PTFE
Spring: steel
Ends: male threaded BSP
Range rating: 3 to 8 bar
P : 16 barT : 80°C
7785108119132140166203261
0.1150.1400.3200.5600.7301.1701.6202.6005.950
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"
SR 2141 Soupape de sûreté à échappement canalisé PN16 Canalized leakage safety valve PN16Corps : bronze
Ressort : acier
Etanchéité : PTFE
Raccordement :taraudé gaz
Plage de réglage :3 à 8 bar
Body: bronze
Spring: steel
Tight: PTFE
Ends: threaded BSP
Range rating: 3 to 8 bar
33354246556774 8090110
P : 16 barT : 80°C
123135167181210237259300320395
0.370.390.631.001.452.103.255.506.8013.30
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
SR 2142 Soupape de sûreté à échappement canalisé avec levier PN16Canalized leakage safety valve with lever PN16Corps : bronze
Ressort : acier
Etanchéité : PTFE
Raccordement :taraudé gaz
Plage de réglage :3 à 8 bar
Body: bronze
Spring: steel
Tight: PTFE
Ends: threaded BSP
Range rating: 3 to 8 bar
354246556774
P : 16 barT : 110°C
125157171195227249
0.400.701.001.602.203.45
1/2"3/4"1"
1"1/41"1/2
2"
DP 2102 Détendeur de pression bronze / Bronze pressure reducing valveCorps : bronze
Etanchéité : EPDM
Chapeau : bronze
Joints : EPDM
Raccordement :à manchons femellestaraudés gaz
Option : à brides
Body: bronze
Tight: EPDM
Bonnet: bronze
Gasket: EPDM
Ends: female threaded BSP
Option: flanged
9292108123155172198215234
120120130160180205235270300
1.251.251.752.354.005.408.8012.0016.50
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"
DP 2103 Détendeur de pression bronze / Bronze pressure reducing valveCorps : bronze
Etanchéité : EPDM
Chapeau : bronze
Joints : EPDM
Raccordement : à manchons femellestaraudés gaz
Avec ressort compensateurpour faibles pressions aval
Option : à brides
Body: bronze
Tight: EPDM
Bonnet: bronze
Gasket: EPDM
Ends: female threaded BSP
With compensating spring for low downstream pressure
Option: flanged
9292108123155172198215234
T max. : 80°CPS amont
max /PS upstreammax : 25 bar
Plage de réglage aval /Downstream
range : 0.5 à/up to
7 bar
120120130160180205235270300
1.251.251.752.354.005.408.8012.0016.50
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"
L
H
T max. : 80°CPS amont
max /PS upstreammax : 25 bar
Plage de réglage aval /Downstream
range : 1 à/up to 7 bar
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:01 Page30
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
31
MatériauxMaterials
DN
mm
L1Conditions de servicePressure
Temperature
RéférenceReference
mm inch
H
DP 1100 Réducteur de pression PN16 / Pressure reducing valve PN16Corps : laiton
Etanchéité : acier inox
Chapeau : laiton
Joints : nitrile
Raccordement :taraudé gaz
Body: brass
Tight: stainless steel
Bonnet: brass
Gasket: nitril
Ends: threaded BSP
60 60 60 869191 91
P : 16 barT : 80°C
P amont/upstream
16 bar aval/downstream
0.5 - 4 bar
89.089.089.091.598.098.0101.0
3/8"1/2"3/4"1"
1"1/41"1/2
2"
DP 1201 Réducteur de pression à brides PN16 / Flanged pressure reducing valve PN16Corps : laiton
Etanchéité : acier inox
Chapeau : laiton
Joints : nitrile
Raccordement : brides PN16 rapportées vissées
Body: brass
Tight: stainless steel
Bonnet: brass
Gasket: nitril
Ends: screwded PN16 flanges
157161161188194202260276290
P : 16 barT : 80°C
P amont/upstream
16 bar aval/downstream
0.5 - 4 bar
9797102153163163290290290
1520253240506580100
DP 1101 Réducteur de pression PN25 / Pressure reducing valve PN25Corps : laiton
Etanchéité : acier inox
Chapeau : laiton
Joints : nitrile
Raccordement :taraudé gaz
Body: brass
Tight: stainless steel
Bonnet: brass
Gasket: nitril
Ends: threaded BSP
959595116122126180188202
P : 25 barT : 80°C
P amont/upstream
25 bar aval/downstream
0.5 - 7 bar
9797102153163163290290290
1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
Soupapes de suretéDétendeurs
Safety valvesPressure reducers
SortieOutlet
L
H
DP 3240 Réducteur de pression aval réglable / Downstream pressure reducing valveCorps : fonte grise époxy
Etanchéité : nitrile
Chapeau : fonte
Joints : nitrile
Raccordement : à brides PN16
Autre construction :acier, inox
Body: cast iron epoxy coating
Tight: nitril
Bonnet: cast iron
Gasket: nitril
Ends: flanged PN16
Other construction: steel, stainless steel
230290310350400450550
P : 16 barT : 80°C
P amont/upstream
16 bar aval/downstream
1.5 - 6 bar
3003503904405606701450
16.527.032.047.077.098.0191.0
50 65 80100125150200
DP 8200 Régulateur de pression gaz / Gas pressure regulatorCorps : aluminium
Etanchéité : nitrile
Chapeau : aluminium
Joints : nitrile
Raccordement : brides PN10
Body: aluminium
Tight: nitril
Bonnet: aluminium
Gasket: nitril
Ends: flanged PN10
315315
P : 10 barT : 60°C
P amont/upstream
500 mbar aval/downstream30 - 150 mbar
340340
6580
DP 8100 Régulateur de pression gaz / Gas pressure regulatorCorps : aluminium
Etanchéité : nitrile
Chapeau : aluminium
Joints : nitrile
Raccordement : taraudé gaz
Body: aluminium
Tight: nitril
Bonnet: aluminium
Gasket: nitril
Ends: threaded BSP
100100115175220
P : 10 barT : 60°C
P amont/upstream
500 mbar aval/downstream30 - 150 mbar
105105125170250
1/2"3/4"1"
1"1/22"
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:01 Page31
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:01 Page32
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:01 Page33
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
34
Robinets à boisseau sphérique et conique
Ball valvesPlug valves
MatériauxMaterials
DNPoids
WeightPressionPressure
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
RSP 1142 Robinet à boisseau sphérique passage intégral femelle/femelleFull bore ball valve female threaded ends
Corps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Joints : PTFE
Raccordement :manchons taraudés gaz
Poignée rouge
Body: nickeled brass
Ball: chromed brass
Tight: PTFE
Gasket: PTFE
Ends: female threaded BSP
Red lever
4040515763778595121141159
Eau/AirWater/Air
P max. : 25 barT :
–20°C / 120°C
37.037.047.555.560.570.076.587.5107.5127.0145.0
80.080.083.591.5100.5116.5132.0151.5178.0222.0225.0
2525202020202018101010
0.120.130.160.230.350.620.761.252.853.755.80
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
BS 1658 Robinet à boisseau sphérique passage réduit femelle/femelleReduce bore ball valve female threaded ends
Corps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Joints : PTFE
Raccordement :manchons taraudés gaz
Body: nickeled brass
Ball: chromed brass
Tight: PTFE
Gasket: PTFE
Ends: female threaded BSP
41.541.546.549.561.069.080.092.0111.0124.0
P max. : 16 barT :
–20°C / 120°C
44.044.040.046.053.565.067.077.097.0105.0
80.080.082.582.590.0118.5118.5132.0151.5178.0
16161212121212101010
0.120.120.130.170.260.450.630.971.552.31
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"
BS 1150 Robinet à boisseau sphérique passage intégral spécial gazFull bore ball valve for gas
Corps : laiton
Sphère : laiton chromé
Etanchéité : PTFE
Joints : PTFE
Raccordement : manchons taraudés gaz
Nota : double étanchéité au presse-étoupe, agrément gaz DWGV, poignée jaune.
Body: brass
Ball: chromed brass
Tight: PTFE
Gasket: PTFE
Ends: female threaded BSP
Nota: gland packing with double tightness,DWGV gas agreement, yellow lever
49.552.461.068.085.099.5109.0130.0
P : 5 barT : 60°C
37.037.048.354.858.875.090.097.0
80.080.088.5113.0113.0137.5157.3157.3
0.110.120.250.350.550.801.301.80
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
BS 1152 Robinet à boisseau sphérique passage intégral spécial gaz agréé NFFull bore ball valve for gas with NF agrement
Corps : laiton
Sphère : laiton chromé
Etanchéité : PTFE
Joints : FPM (type Viton®)
Raccordement : manchons taraudés gaz
Certificat NF ROBGAZ N°
ROB 027-00
Body: brass
Ball: chromed brass
Tight: PTFE
Gasket: FPM (type Viton®)
Ends: female threaded BSP
NF ROBGAZ certificate N°
ROB 027-00
62708298109125
P : 5 barT : 60°C
44.052.557.066.073.584.0
90110110115115150
0.230.370.611.031.392.12
1/2"3/4"1"
1"1/41"1/2
2"
mm bar
L1
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:01 Page34
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
35
Robinets à boisseau sphérique et conique
Ball valvesPlug valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
BS 1653 Robinet à boisseau sphérique passage intégral mâle/femelleFull bore ball valve male/female threaded
Corps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Joints : PTFE
Raccordement :filetage mâle / taraudé femelle gaz
Avec poignée papillon
Body: nickeled brass
Ball : chromed brass
Tight: PTFE
Gasket: PTFE
Ends: male/female threaded BSP
With butterfly handle
47.047.052.561.072.5
P : 25 barDN 1/4"- 3/8"
P : 20 barDN 1/2"- 1"
T : 120°C
36.836.844.047.550.0
53.553.553.553.565.0
0.120.120.170.270.48
1/4"3/8"1/2"3/4"1"
BS 1158 Robinet à boisseau sphérique passage intégral mâle/mâleFull bore ball valve male/male threaded
Corps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Joints : PTFE
Raccordement :filetage mâle/mâle
Body: nickeled brass
Ball : chromed brass
Tight: PTFE
Gasket: PTFE
Ends: male/male threaded
53.058.066.078.091.0104.5121.5
Eau/AirWater/Air
P : 25 barDN 3/8"- 1/2"
P : 20 barDN 3/4"- 1"1/2
P : 18 barDN 2"
T : 120°C
36.844.047.550.067.074.087.0
84848496116136162
0.120.170.250.410.660.861.49
3/8"1/2"3/4"1"
1"1/41"1/2
2"
BS 1159 Robinet à boisseau sphérique passage intégral mâle/mâleFull bore ball valve male/male threaded
Corps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Joints : PTFE
Raccordement :filetage mâle/mâle
Avec poignée papillon
Body: nickeled brass
Ball : chromed brass
Tight: PTFE
Gasket: PTFE
Ends: male/male threaded
With butterfly handle
53586678
P : 25 barDN 3/8" - 1/2"
P : 20 barDN 3/4"- 1"
T : 120°C
36.844.047.550.0
53.553.553.565.0
0.120.170.250.41
3/8"1/2"3/4"1"
BS 1140 Robinet à boisseau sphérique passage intégral avec trou de décompressionFull bore ball valve male/male threaded with hole of decompression
Corps : laiton
Sphère : laiton chromé
Etanchéité : PTFE
Raccordement :manchons taraudés gaz
Body: brass
Ball : chromed brass
Tight: PTFE
Gasket: PTFE
Ends: female threaded BSP
45.545.556.062.5
P : 20 barT : 120°C
49.549.551.560.5
878787112
0.140.140.200.32
1/4"3/8"1/2"3/4"
mm
L1
mm
L2
BS 1652 Robinet à boisseau sphérique passage intégral mâle/femelleFull bore ball valve male/female threaded
Corps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Joints : PTFE
Raccordement : filetage mâle / taraudagefemelle gaz
Body: nickeled brass
Ball : chromed brass
Tight: PTFE
Gasket : PTFE
Ends: male/female threaded BSP
47.047.052.561.072.583.095.5112.5
P max. : 25 barT : 120°C
36.836.844.047.550.067.074.087.0
8484848496116136162
2525202020202018
0.130.120.160.240.400.610.851.44
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
PressionPressure
bar
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:02 Page35
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
36
Robinets à boisseau sphérique et conique
Ball valvesPlug valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
BS 1141 Robinet à boisseau sphérique passage intégral poignée papillon femelle/femelleFull bore ball valve with butterfly handle female threaded ends
Corps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Joints : PTFE
Raccordement : manchons taraudés gaz
Body: nickeled brass
Ball : chromed brass
Tight: PTFE
Gasket: PTFE
Ends: female threaded BSP
4343495667
Eau/AirWater/AirP : 25 bar
DN 1/4"- 3/8"
P : 20 barDN 1/2"- 1"
T : –20°C / 120°C
37.839.045.048.550.0
53.553.553.553.565.0
0.130.120.160.240.36
1/4"3/8"1/2"3/4"1"
BS 1153 Robinet à boisseau sphérique passage intégral à purgeFull bore ball valve with tap and drain cock
Corps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Joints : PTFE
Raccordement : manchons taraudés gaz
Body: nickeled brass
Ball : chromed brass
Tight: PTFE
Gasket: PTFE
Ends: female threaded BSP
54.560.070.280.091.0106.6
Eau/AirWater/AirP : 20 bar
DN 1/2"- 1"1/2P : 18 bar
DN 2"T :
–20°C / 120°C
44.047.550.067.074.087.0
0.230.310.450.650.941.47
1/2"3/4"1"
1"1/41"1/2
2"
BS 1166 L Robinet à boisseau sphérique laiton - 3 voies en LBrass 3 ways «L» ball valve
Body: nickeled brass
Ball : chromed brass
Tight: PTFE
Gasket: PTFE
Ends: female threaded BSP
74748090105115138161
Eau/AirWater/AirP : 16 barT : 90°C
585860647379100105
9090125125140140220220
0.480.440.701.121.571.963.505.10
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
BS 1167 T Robinet à boisseau sphérique laiton - 3 voies en T / Brass 3 ways «T» ball valveCorps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Joints : PTFE
Raccordement : à manchons taraudés gaz
Body: nickeled brass
Ball : chromed brass
Tight: PTFE
Gasket: PTFE
Ends: female threaded BSP
74748090105115138161
Eau/AirWater/AirP : 16 barT : 90°C
585860647379100105
9090125125140140220220
0.480.440.701.121.571.963.505.10
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
RP 1105 Robinet de puisage à boisseau sphérique / Drain ball valveCorps : laiton
Sphère : laiton chromé
Sièges : PTFE
Raccordement : fileté gaz
Body: brass
Ball : chromed brass
Seats: PTFE
Ends: male threaded BSP
92.5102.0124.0143.5
P : 16 barT : 60°C 19
192326
---
0.6
1/2"3/4"3/4"1"
BS 1154 Robinet à boisseau sphérique passage intégral - modèle lourdFull bore ball valve with butterfly handle - hard type
Corps : laiton
Sphère : laiton chromé
Etanchéité : PTFE
Raccordement : manchons taraudés gaz
Body: brass
Ball : chromed brass
Tight: PTFE
Ends: female threaded BSP
414663718392104126141161192
P : 40 barDN 1/4"- 1"
P : 30 barDN 1"1/4 - 1"1/2
P : 20 barDN 2"
P : 18 barDN 2"1/2 - 4"
T : 120°C
3232424554597078109118130
80809292115115150150260260260
0.150.160.260.350.580.811.332.024.005.459.05
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
mm
L1
mm
L2
TétineTeat
Corps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Joints : PTFE
Raccordement : manchonstaraudés gaz
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:02 Page36
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
37
Robinets à boisseau sphérique et conique
Ball valvesPlug valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
BA 1653 Robinet à boisseau sphérique de compteur à purge (mâle)Ball valve for meter with drain cock (male)
Corps : laiton OT 58 nickelé
Sphère : laiton chromé
Siège : PTFE
Poignée : papillon en alliage d’alu
Raccordement : écrou prisonnier, fileté mâle gaz
Purge : DN 1/8"
Body: brass OT 58 nickeled
Ball: chromed brass
Seat: PTFE
Handle: butterfly in aluminium
Ends: spinning nut, BSP male
Trap: DN 1/8"
8087
P : 20 barT :
–30°C /120°C
38.538.5
3/4"1"
7070
0.280.29
3/4"3/4"
BA 1650 Robinet à boisseau sphérique avant compteur passage intégral (mâle)Full bore meter ball valve (male)
Corps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Siège : PTFE
Raccordement : écrou prisonnier, fileté mâle gaz
Body: nickeled brass
Ball: chromed brass
Tight: PTFE
Seat: PTFE
Ends: spinning nut, BSP male screwed
65.569.069.5
P : 25 barT : 120°C
404040
1/2"3/4"1"
505050
0.220.230.24
3/4"3/4"3/4"
BA 1150 Robinet à boisseau sphérique avant compteur passage intégral (femelle)Full bore meter ball valve (female)
Corps : laiton nickelé
Sphère : laiton chromé
Etanchéité : PTFE
Siège : PTFE
Raccordement : écrou prisonnier, taraudé femellegaz
Body: nickeled brass
Ball: chromed brass
Tight: PTFE
Seat: PTFE
Ends: spinning nut, BSP female threaded
60.058.5
P : 25 barT : 120°C
4040
1/2"3/4"
5050
0.210.22
3/4"3/4"
BA 1652 Robinet à boisseau sphérique de compteur équerre (avant ou après compteur)Angle ball valve for meter (before or after meter)
Corps : laiton matricé, nickelé
Sphère : laiton chromé
Siège : PTFE
Poignée : papillon en alliage d’alu
Raccordement : écrou prisonnier 3/4, fileté mâlegaz
Body: nickeled brass
Ball: brass chromed
Seat: PTFE
Handle: butterfly in plasticcovered aluminium
Ends: spinning nut 3/4",BSP male threaded
565656
P : 20 barT : 120°C
38.538.538.5
1/2"3/4"1"
0.360.360.38
3/4"3/4"3/4"
BS 1142 Robinet à boisseau sphérique avec clapet incorporé / PN 16Ball valve with ballstop / PN16
Corps : laiton matricé, nickelé
Sphère : laiton chromé
Siège : PTFE
Clapet : laiton chromé
Contact d’étanchéité :caoutchouc NBR
Ressort : inox
Raccordement :taraudé gaz
Body: nickeled brass
Ball: brass chromed
Seat: PTFE
Disc: brass chromed
Tightness contact: rubber NBR
Spring: stainless steel
Ends: BSP female threaded
5157708389110
P max. : 20 barT max. : 100°C
50.552.561.565.580.089.0
585870111149149
1/2"3/4"1"
1"1/41"1/2
2"
inch
DN1
mm
L2
L
H
L2
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:02 Page37
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
38
Robinets à boisseau sphérique et conique
Ball valvesPlug valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm mm kg
H L1Conditions de servicePressure
Temperature
RéférenceReference
BS 5440 Robinet à boisseau sphérique acier - passage intégral série étroite - platine ISOSteel full bore ball valve - wafer type - ISO mounting plate
Corps : acier A105
Sphère : inox 304
Siège : PTFE
Montage entre-brides corps taraudé PN10/16
Sécurité feu
Système antistatique
Body: steel A105
Ball: stainless steel 304
Seat: PTFE
Wafer type - threaded body PN10/16
Fire safe
Antistatic device
36363943516383107120152180240314
P : 16 barT : 180°C
6464668590118128139144200212265320
145145145180180275275380380440440800800
1.51.52.02.74.06.510.017.020.533.548.069.0132.0
101520253240506580100125150200
BS 3241 Robinet à boisseau sphérique à brides passage intégral / PN16Full bore ball valve with flanges / PN16
Corps : fonte GG 25
Sphère : laiton chromé dur
Siège : PTFE
Poignée : acier
Raccordement : brides PN16
Option : sphère inox
Body: cast iron GG 25
Ball: brass chromed
Seat: PTFE
Handle: steel
Ends: flanged PN16
Option: stainless steel ball
140150170180190200210400
P max. : 16 barT max. : 100°C
115120128150170210230325
165200260260260320320700
6.29.012.215.520.028.038.593.0
40506580100125150200
BC 2100 Robinet à tournant conique / Plug valveCorps : bronze
Tournant : bronze
Etanchéité : bronze
Raccordement : taraudé gaz
Autre possibilité : mâle-femelle
Body: bronze
Plug: bronze
Tight: bronze
Ends: female threaded BSP
Other possibility: male/female
404550607085100115
P : 10 barT : 120°C
VapeurSteam
P : 6 barT : 165°C
2631364552687387
0.100.140.210.370.660.861.422.15
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
BC 2140 Robinet à tournant conique 3 voies / 3 ways plug valveCorps : bronze
Tournant : bronze
Etanchéité : bronze
Raccordement : taraudé gaz
Autre possibilité : L ou T
Body: bronze
Plug: bronze
Tight: bronze
Ends: female threaded BSP
Other possibility: L or T
404550607085100115
P : 10 barT : 120°C
VapeurSteam
P : 6 barT : 165°C
4141485264718494
0.340.340.500.761.031.542.553.60
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
BS 1240 Robinet à boisseau sphérique laiton passage intégral à brides PN10Full bore flanged brass ball valve PN10
Corps : laiton OT 58 nickelé
Sphères : laiton chromé dur
Siège : PTFE
Raccordement : brides PN10/16
Body: brass OT 58 nickeled
Ball: brass chromed
Seat: PTFE
Ends: flanged PN10/16
658085100110125140150170
P : 10 barT :
–30°C /100°C
707090100110120130145170
140140165165200200240240320
1.401.802.503.624.766.508.9011.8515.60
1520253240506580100
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:02 Page38
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
39
Robinets à boisseau sphérique et conique
Ball valvesPlug valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm mm bar kg
H L1 PsConditions de servicePressure
Temperature
RéférenceReference
BS 6441 Robinet à boisseau sphérique inox 316 - passage intégral série étroite - platine ISOStainless steel 316 full bore ball valve - wafer type - ISO mounting plate
Corps : inox 316
Sphère : inox 316
Siège : PTFE
Montage entre-brides corps taraudé PN10/16
Système antistatique
Body: stainless steel 316
Ball: stainless steel 316
Seat: PTFE
Wafer type - threaded body PN10/16
Antistatic device
36363943516383107120152180240314
P : 16 barT : 180°C
6464668590118128139144200212265320
145145145180180275275380380440440800800
1.5 1.52.02.74.06.510.017.020.533.548.069.0132.0
101520253240506580100125150200
BS 6440 Robinet à boisseau sphérique inox 316 - passage intégral - platine ISOStainless steel 316 full bore ball valve - wafer type- ISO mounting plate
Corps : inox 316
Sphère : inox 316
Siège : PTFE
Montage entre-brides corps taraudé PN10/16
Body: stainless steel 316
Ball: stainless steel 316
Seat: PTFE
Wafer type - threaded body PN10/16
43516383107120152
P : 16 barT : 180°C
8891112118130136208
180180275275380380450
2.253.355.007.1011.6013.5028.00
253240506580100
BS 5260 Robinet à boisseau sphérique acier 3 pièces - passage intégral à brides PN403 pieces steel ball valves - full bore flanged PN40
Corps : acier au carbone
Sphère : inox 316
Siège : PTFE +15% verre
Raccordement : brides PN16-25-40
Body: carbon steel
Ball: stainless steel 316
Seat: PTFE +15% glass
Ends: flanged PN16-25-40
130150160180200230290310350
P max. : 40 barT :
–40°C /180°C
VapeurSteam10 bar
73.080.890.598.7115.3124.0155.0208.5216.7
112112136185198198264264325
2.102.803.645.507.3010.0019.5025.1036.30
1520253240506580100
BS 6260 Robinet à boisseau sphérique inox 3 pièces - passage intégral à brides PN403 pieces stainless steel ball valves - full bore flanged PN40
Corps : inox 316
Sphère : inox 316
Siège : PTFE +15% verre
Raccordement : brides PN16-25-40
Body: stainless steel 316
Ball: stainless steel 316
Seat: PTFE +15% glass
Ends: flanged PN16-25-40
130150160180200230290310350
P max. : 40 barT :
–40°C /180°C
VapeurSteam10 bar
73.080.890.598.7115.3124.0155.0208.5216.7
112112136185198198264264325
2.102.803.645.50703010.0019.5025.1036.30
1520253240506580100
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:02 Page39
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
40
Robinets à boisseau sphérique et conique
Ball valvesPlug valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm mm kg
H L1Conditions de servicePressure
Temperature
RéférenceReference
BS 5245 Robinet à boisseau sphérique acier 2 pièces passage intégral type «split body» à brides PN162 pieces split body full bore carbon steel ball valve flanged PN16
Corps : acier
Sphère : inox
Siège : PTFE
Raccordement :brides PN16
Platine ISO
Note : existe en passageréduit PN25, 40, ASA 150 lbs, ASA 300 lbs
Body: carbon steel
Ball: stainless steel
Seat: PTFE
Ends: flanged PN16
ISO mounting plate
Note : exist in reduce borePN25, 40, ASA 150 lbs, ASA 300 lbs
115120125130140150170180190325350400450
P : 16 barT : 150°C
64668590118128139144200212265320
-
145145180180275275380380440440800800
-
2.73.05.56.810.515.521.025.038.060.070.0105.0150.0
1520253240506580100125150200250
BS 6244 Robinet à boisseau sphérique inox 2 pièces passage intégraltype «split body» à brides PN162 pieces split body full bore stainless steel ball valve flanged PN16
Corps : inox
Sphère : inox
Siège : PTFE
Raccordement :brides PN16
Platine ISO
Note : existe en passageréduit PN25, 40, ASA 150 lbs, ASA 300 lbs
Body: stainless steel
Ball: stainless steel
Seat: PTFE
Ends: flanged PN16
ISO mounting plate
Note : exist in reduce borePN25, 40, ASA 150 lbs, ASA 300 lbs
115120125130140150170180190325350400450
P : 16 barT : 150°C
64668590118128139144200212265320
-
145145180180275275380380440440800800
-
2.73.05.56.810.515.521.025.038.060.070.0105.0150.0
1520253240506580100125150200250
BS 5244 Robinet à boisseau sphérique 3 voies à brides / Three ways flanged ball valveCorps : acier
Sphère : inox
Etanchéité : PTFE
Raccordement : brides PN10 à PN40
Autres constructions :corps et sphère inox 316
Type : L ou T
Body: steel
Ball: stainless steel
Tight: PTFE
Ends: flanges PN10 to PN40
Others constructions: stainless steel 316 bodyand ball
Type: L or T
758095100110120140150165195220250310400
P : 16 barT : 150°C
66708286116124139144195209264319
--
56710121730364875----
1520253240506580100125150200250300
BS 6160 Robinet à boisseau sphérique inox monobloc passage réduit PN55One piece stainless steel reduced bore ball valve PN55Corps : inox 316
Sphère : inox 316
Siège : PTFE + 15% verre
Raccordement :taraudé femelle
Système de verrouillage
Body: stainless steel 316
Ball: stainless steel 316
Seat: PTFE + 15% glass
Ends: female threaded
Blocking set
39.044.056.559.571.078.083.0100.5
P : 40 barT : 180°C
3335424650566672
64758989106106128128
0.060.120.180.260.420.760.861.38
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:02 Page40
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
41
Robinets à boisseau sphérique et conique
Ball valvesPlug valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm mm kg
H L1Conditions de servicePressure
Temperature
RéférenceReference
L
H
L1
BS 6179 Robinet à boisseau sphérique inox passage intégral PN64Stainless steel full bore ball valve PN64
Corps : inox 316
Sphère : inox 316
Siège : PTFE
Poignée : inox 304
Raccordement : taraudé femelle gaz
Système de verrouillage
Body: stainless steel 316
Ball: stainless steel 316
Seat: PTFE
Handle: stainless steel 304
Ends: female threaded BSP
Blocking set
55.055.062.066.079.091.5101.2118.3148.0166.0
P max. : 64 bar(100°C)
VapeurSteam
P max. : 8 bar(180°C)
64646666808697105146155
989898125143143200200250250
0.310.300.310.480.771.201.802.705.907.70
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"
BS 5179 Robinet à boisseau sphérique acier passage intégral PN64Steel full bore ball valve PN64
Corps : acier A216 WCB
Sphère : inox 304
Siège : PTFE + 15% verre
Poignée : inox AISI 304
Raccordement : taraudé femelle gaz
Système de verrouillage
Body: steel A216 WCB
Ball: stainless steel 304
Seat: PTFE + 15% glass
Handle: stainless steel AISI 304
Ends: female threaded BSP
Blocking set
505058658092105125160185
P max. : 64 bar(100°C)
VapeurSteam
P max. : 8 bar(180°C)
50505257758095102130140
100100100120150150180180250250
64646464505040402525
0.260.240.370.530.831.361.953.356.9010.10
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"
BS 6379 Robinet à boisseau sphérique 3 pièces inox passage intégral PN64Stainless steel 3 pieces full bore ball valve PN64
Corps : inox 316
Sphère : inox 316
Siège : PTFE
Raccordement :taraudé gaz, NPT ou à souder BW-SW
Système de verrouillage
Body: stainless steel 316
Ball: stainless steel 316
Seat: PTFE
Ends: female threadedBSP, NPT or BW-SW
Blocking set
6464657789103115134166190226
P max. : 64 bar(100°C)
VapeurSteam
P max. : 10 bar(180°C)
55556467838995105145155175
9696125125145145200200255255300
0.390.410.550.801.201.902.353.908.3012.3018.70
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
BS 5379 Robinet à boisseau sphérique 3 pièces acier passage intégral PN64Carbon steel 3 pieces full bore ball valve PN64
Corps : acier
Sphère : inox 316
Siège : PTFE
Raccordement :taraudé gaz, NPT ou à souder BW-SW
Système de verrouillage
Body: steel
Ball: stainless steel 316
Seat: PTFE
Ends: female threaded BSP, NPT or BW-SW
Blocking set
59.060.065.576.586.2103.1118.0131.5
P max. : 64 bar(100°C)
VapeurSteam
P max. : 10 bar(180°C)
52526368798897108
108108113113135135160160
0.260.240.340.590.871.292.063.35
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
BS 6161 Robinet à boisseau sphérique 3 voies inox monobloc passage réduit PN64Stainless steel one piece reduced bore 3 ways ball valve PN64
Corps : inox 316
Sphère : inox 316
Etanchéité : PTFE
Siège : PTFE
Raccordement : taraudé gaz
Type : L ou T
Système de verrouillage
Body: stainless steel 316
Ball: stainless steel 316
Tight: PTFE
Seat: PTFE
Ends: female threaded BSP
Type: L or T
Blocking set
74748089105113140161
P max. : 40 bar(100°C)
VapeurSteam
P max. : 10 bar(140°C)
63637180848991117
9292112150150150150240
0.770.721.081.512.524.104.607.50
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:02 Page41
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
42
Robinets à boisseau sphérique et conique
Ball valvesPlug valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm mm kg
H L1Conditions de servicePressure
Temperature
RéférenceReference
BS 5160 Robinet à boisseau sphérique haute pression passage réduit High pressure reduced bore ball valve Corps : acier bichromaté
Sphère : acier chromé
Axe : inox 304
Siège : delrin/PTFE
Raccordement : taraudé
Body: bichromated steel
Ball: chromated steel
Stem: stainless steel 304
Seat: delrin/PTFE
Ends: threaded
71728395113
T : 100°C
1/4" - 1/2"P : 500 bar
3/4" - 1"P : 315 bar
3540455065
110110110180180
0.490.640.751.412.17
1/4"3/8"1/2"3/4"1"
BS 5185 Robinet à boisseau sphérique 3 pièces acier passage intégral Three parts carbon steel full bore ball valveCorps : acier A 105
Sphère : inox 420
Etanchéité : PTFE renforcé
Raccordement : taraudé gaz, NPT, SW, BW
Body: steel A 105
Ball: stainless steel 420
Tight: reinforced PTFE
Ends: threaded BSP, NPT, SW, BW
757580100110120140
P : 120 barT :
–100°C / 180°C
6767708092108113
152152152193193225225
1.11
1.32.33.24.35.8
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
BS 5380 Robinet à boisseau sphérique 3 pièces acier passage réduit Three pieces carbon steel reduced bore ball valveCorps : acier A 105
Sphère : inox 420
Etanchéité : PTFE renforcé
Raccordement : taraudé gaz, NPT, SW, BW
Body: steel A 105
Ball: stainless steel 420
Tight: reinforced PTFE
Ends: threaded BSP, NPT, SW, BW
7580100110120140
P : 120 barT :
–100°C / 180°C
67708092108113
152152193193225225
1.01.32.33.24.35.8
1/2"3/4"1"
1"1/41"1/2
2"
BS 6180 Robinet à boisseau sphérique 3 pièces inox passage intégralThree pieces stainless steel full bore ball valveCorps : inox 316
Sphère : inox 316
Etanchéité : PTFE renforcé
Raccordement : taraudé gaz, NPT, SW, BW
Body: stainless steel 316
Ball: stainless steel 316
Tight: reinforced PTFE
Ends: threaded BSP, NPT, SW, BW
757580100110120140
P : 120 barT :
–100°C / 180°C
6767708092108113
152152152193193225225
1.11.01.32.33.24.35.8
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
BS 6380 Robinet à boisseau sphérique 3 pièces inox passage réduitThree pieces stainless steel reduced bore ball valveCorps : inox 316
Sphère : inox 316
Etanchéité : PTFE renforcé
Raccordement : taraudé gaz, NPT, SW, BW
Body: stainless steel 316
Ball: stainless steel 316
Tight: reinforced PTFE
Ends: threaded BSP, NPT, SW, BW
7580100110120140
P : 120 barT :
–100°C / 180°C
67708092108113
152152193193225225
1.01.32.33.24.35.8
1/2"3/4"1"
1"1/41"1/2
2"
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:02 Page42
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
43
Robinets à boisseau sphérique et conique
Ball valvesPlug valves
MatériauxMaterials
DNPoids
Weight
mm
L
mm mm kg
H L1Conditions de servicePressure
Temperature
RéférenceReference
L
H
L1
BS 5360 Robinet à boisseau sphérique acier 3 voies étanches en L ou T - passage réduit3 tight ways steel ball valve L or T - reduce boreCorps : acier A 105
Sphère : inox 316
Etanchéité : PTFE renforcé
Raccordement : taraudé gaz, NPT, SW, BW
Body: steel A 105
Ball: stainless steel 316
Tight: reinforced PTFE
Ends: threaded BSP, NPT, SW, BW
113113119150158182201262423
P : 120 barT :
–100°C / 180°C
7070758698113118135165
152152193193225225225420420
2.32.33.05.07.010.013.555.065.0
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
BS 6360 Robinet à boisseau sphérique inox 3 voies étanches en L ou T - passage réduit3 tight ways stainless steel ball valve L or T - reduce boreCorps : inox 316
Sphère : inox 316
Etanchéité : PTFE renforcé
Raccordement : taraudé gaz, NPT, SW, BW
Body: stainless steel 316
Ball: stainless steel 316
Tight: reinforced PTFE
Ends: threaded BSP, NPT, SW, BW
113113119150158182201262423
P : 120 barT :
–100°C / 180°C
7070758698113118135165
152152193193225225225420420
2.32.33.05.07.010.013.555.065.0
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
Robinets à boisseau sphérique avec actionneur pneumatique ou électriqueBall valves with pneumatic or electrical actuator
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:03 Page43
TECOFI-VOL2_FR-p1-44_CATAL_FABRICANT.qxd 27/06/13 15:03 Page44
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page45
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
46
Table de compatibilité des matériauxMaterials compatibility table
Fluide Naturel SBR NitrileIIR type
Butyl®
CR type
Neoprene®
CSM type
Hypalon®
FPM type
Viton®EPDM
Cette liste n’est pas exhaustive.
Acétate de butyle
Acétone
Acide acétique
Acide borique
Acide chloridrique
Acide chromique
Acide citrique
Acide fluorhydrique
Acide formique 10%
Acide nitrique 20%
Acide perchlorique
Acide phosphorique
Acide sulfurique 65%
Acide tartrique
Air
Alcool méthylique
Ammoniaque
Aniline
Azote / Nitrogen
Benzène
Bitume
Brome
Chlore sec
Eau
Eau de mer
Eau oxygénée
Essences
Ether
Formaldéhyde
Fréon
Gasoil
Gaz naturel
Heptane
Huile ASTM1
Huiles minérales
Hydrogène
Kérosène
Octane
Oxygène
Phénols
Savon
Soude
Toluène
Trichloroéthylène
White spirit
Xylène
This list is not exhaustive
Compatible
Compatible sous certaines conditions (nous consulter)
Incompatible
Suitable
Suitable depends on operating conditions (please contact us)
Not suitable
Fluide Naturel SBR NitrileIIR type
Butyl®
CR type
Neoprene®
CSM type
Hypalon®
FPM type
Viton®EPDM
Acetic acid
Acetone
Air
Ammonia
Aniline
ASTM1 oil
Benzene
Bitumen
Boric acid
Bromine
Butyl acetates
Chlorine dry
Chromic acid
Citric acid
Diesel
Ether
Formaldehyde
Formic acid ( 10%)
Freon
Gasoline
Heptane
Hydrochloridacid (20%)
Hydrofluoric acid
Hydrogen
Hydrogen peroxyde
Kerosene
Methyl alcohol
Mineral oils
Natural gas
Nitric acid (20%)
Nitrogen
Octane
Oxygen
Perchloric acid
Phenol
Phosphoric acid
Sea water
Soap
Soda
Sulphuric acid ( 65%)
Tartaric acid
Toluene
Trichloroethylene
Water
White spirit
Xylene
Flexibles industrielset compensateurs
Industrial hoses andexpansion joints
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page46
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
47
Guide de sélection des caoutchoucsRubbers selection table
C
C
D
C
C
C
A
A
A
A
B
A
A
A
D
D
D
C
A
B
B
C
C
D
B
A
A
B
C
D
A
A
A
A
A
B
C
C
A
A
A
D
A
A
A
A
A
A
B
C
B
C
C
B
A
A
A
A
A
B
C
C
B
B
C
B
D
A
C
A
A
B
A
B
B
B
A
A
A
A
B
B
B
C
C
C
B
B
C
C
C
B
C
A
B
C
B
A
B
B
B
B
A
A
A
A
C
A
B
B
C
C
C
B
C
A
C
A
A
C
C
B
B
C
C
B
A
A
A
B
C
B
B
D
C
C
C
B
C
A
A
A
A
C
B
C
B
B
C
B
B
C
C
B
C
C
C
C
A
A
B
D
C
B
B
B
C
D
B
B
A
B
B
B
B
C
C
B
D
B
B
B
D
D
D
C
D
B
C
B
C
D
A
A
A
A
A
A
C
C
C
C
D
B
A
A
D
D
D
C
D
B
C
B
B
D
TractionTensile strengthDéchirementTearingAbrasionAbrasionCompression setCompression setRésilienceImpact strengthFlexionFlexion
AirAirLumièreLightningIntempéries / OzoneWeathening / Ozone
ChaleurHeatingFlammeFlameFroidCold
RésistivitéResistivityPropiétés diélectriquesDielectrics properties
HydrocarburesHydrocarbonsSolvants aliphatiquesAliphatic solventsSolvants aromatiquesAromatic solventsAcétonesAcetoneSolvants chlorésChlorinated solventsEauWaterImperméabilité au gazImpermeability with gasAcides dilués / détergentsDilute acids / detergentsAcides fortsStrong acidsAcides forts oxydantsOxydising strong acids
Propriétés physiques Physical properties
NaturelNatural
SBR NitrileNitril
IIRtype
Butyl®
EPDM CR type
Neoprene®
CSM type
Hypalon®
FPM type
Viton®
SiliconeSilicon
Tenue au vieillissement / Ageing resistance
Tenue en température / Temperature resistance
Isolement électrique / Electric insulating
Tenue aux fluides / Medias resistance
Propriétés mécaniques / Mechanical propertiesTrès bonVery good
BonGood
Acceptable selon conditions (nous consulter)Suitable depends on operating conditions (please contact us)
A proscrireTo avoid
Flexibles industrielset compensateurs
Industrial hoses andexpansion joints
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page47
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
48
Caoutchoucs / Rubbers
■ SBR Good strenth properties. Good resistance to dilute acids and alkalis, hot and cold water.Main characteristics
- Maxi. temperature: + 70°C- Mini. temperature: – 15°C- Hardness: 70 shore A- Tensile strenght: 40 kg /cm2
- Elongation at break: 250%- Specific weight: 1.5 g /cm3
- Color: black
■ Natural Excellent strenth properties (abrasion & flexion). Very good resistance to dilute.Main characteristics
- Maxi. temperature: + 80°C- Mini. temperature: – 40°C- Hardness: 40 shore A- Tensile strenght: 160 kg /cm2
- Elongation at break: 500%- Specific weight: 1 g /cm3
- Color: tan
■ EPDMVery good strenth properties. Excellent weathering properties. Good resistance to dilute acids, vegetable and animals oils.Main characteristics
- Maxi. temperature: + 110°C- Mini. temperature: – 40°C- Hardness: 65 shore A- Tensile strenght: 50 kg /cm2
- Elongation at break: 200%- Specific weight: 1.35 g /cm3
- Color: black
■ NitrilGood strenth properties. Good resistance to hydrocarbons,animals, synthetics and vegetables oils.Main characteristics
- Maxi. temperature: + 90°C- Mini. temperature: – 20°C- Hardness: 65 shore A- Tensile strenght: 30 kg /cm2
- Elongation at break: 250%- Specific weight: 1.65 g /cm3
- Color: black
■ FPM (type Viton®)Very good strenth properties, high resistance to abrasion and ageing. Very good resistance to dilute acids and alkalis, hydrocarbons, solvents.Main characteristics
- Maxi. temperature: + 250°C- Mini. temperature: – 30°C- Hardness: 75 shore A- Tensile strenght: 50 kg /cm2
- Elongation at break: 250%- Specific weight: 2.05 g /cm3
- Color: black
■ SBR (styrène butadiène)Bonnes propriétés mécaniques. Bonne résistance aux acidesdilués et alcalis, eaux chaudes et froides.Principales caractéristiques
- Température maxi : + 70°C- Température mini : – 15°C- Dureté : 70 shore A - Résistance à la rupture : 40 kg /cm2
- Allongement à la rupture : 250% - Densité : 1,5 g /cm3
- Couleur : noir
■ Naturel (para)Excellentes propriétés mécaniques (abrasion, flexion). Très bonne résistance aux acides dilués.Principales caractéristiques
- Température maxi : + 80°C- Température mini : – 40°C- Dureté : 40 shore A - Résistance à la rupture : 160 kg /cm2
- Allongement à la rupture : 500% - Densité : 1 g /cm3
- Couleur : blond
■ EPDMTrès bonnes propriétés mécaniques. Excellente résistance aux U.V., aux intempéries, à l’air. Bonne résistance aux acides dilués, graisses animales et végétales.Principales caractéristiques
- Température maxi : + 110°C- Température mini : – 40°C- Dureté : 65 shore A - Résistance à la rupture : 50 kg /cm2
- Allongement à la rupture : 200% - Densité : 1,35 g /cm3
- Couleur : noir
■ NitrileBonnes propriétés mécaniques. Bonne résistance aux dérivéspétroliers, huiles animales, synthétiques et végétales.Principales caractéristiques
- Température maxi : + 90°C- Température mini : – 20°C- Dureté : 65 shore A - Résistance à la rupture : 30 kg /cm2
- Allongement à la rupture : 250% - Densité : 1,65 g /cm3
- Couleur : noir
■ FPM (type Viton®)Très bonnes propriétés mécaniques, au vieillissement, à l’abrasion. Très bonne résistance aux acides dilués et alcalis, aux dérivés pétroliers, aux solvants, aux détergents.Principales caractéristiques
- Température maxi : + 250°C- Température mini : – 30°C- Dureté : 75 shore A - Résistance à la rupture : 50 kg /cm2
- Allongement à la rupture : 250% - Densité : 2,05 g /cm3
- Couleur : noir
Flexibles industrielset compensateurs
Industrial hoses andexpansion joints
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page48
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
49
Caoutchoucs / Rubbers
■ SiliconExcellent weathering properties. Good resistance to diluteacids. Good electrical insulation properties.Main characteristics
- Maxi. temperature: + 200°C- Mini. temperature: – 70°C- Hardness: 60 shore A- Tensile strenght: 90 kg /cm2
- Elongation at break: 300%- Specific weight: 1.2 g /cm3
- Color: red
■ IIR (type Butyl®)Good weathering resistance. Good resistance to dilute acidsand strong acids.
Main characteristics- Maxi. temperature: + 150°C- Mini. temperature: – 30°C- Hardness: 60 shore A- Tensile strenght: 140 kg /cm2
- Elongation at break: 550%- Specific weight: 1.2 g /cm3
- Color: black
■ CSM (type Hypalon®)Good strenth properties. Very good resistance to dilute &strong acids, oils and température.Main characteristics
- Maxi. temperature: + 130°C- Mini. temperature: – 30°C- Hardness: 70 shore A- Tensile strenght: 70 kg /cm2
- Elongation at break: 250%- Specific weight: 1.5 g /cm3
- Color: black
■ CR (type Neoprene®)Very good strenth properties. Good weathering properties.Good resistance to dilute acids.Main characteristics
- Maxi. temperature: + 110°C- Mini. temperature: – 20°C- Hardness: 65 shore A- Tensile strenght: 40 kg /cm2
- Elongation at break: 200%- Specific weight: 1.45 g /cm3
- Color: black
■ SiliconeExcellente résistance aux U.V., aux intempéries, à l’air. Bonnerésistance aux acides dilués. Bonne propiétés diélectriques.Principales caractéristiques
- Température maxi : + 200°C- Température mini : – 70°C- Dureté : 60 shore A - Résistance à la rupture : 90 kg /cm2
- Allongement à la rupture : 300% - Densité : 1,2 g /cm3
- Couleur : rouge
■ IIR (type Butyl®)Bonnes résistance aux intempéries, à la lumière, à l’air. Bonne résistance aux acides dilués et acides forts.Principales caractéristiques
- Température maxi : + 150°C- Température mini : – 30°C- Dureté : 60 shore A - Résistance à la rupture : 140 kg /cm2
- Allongement à la rupture : 550% - Densité : 1,2 g /cm3
- Couleur : noir
■ CSM (type Hypalon®)Bonnes propriétés mécaniques. Très bonne résistance aux acides dilués, forts, aux huiles et à la chaleur.Principales caractéristiques
- Température maxi : + 130°C- Température mini : – 30°C- Dureté : 70 shore A - Résistance à la rupture : 70 kg /cm2
- Allongement à la rupture : 250% - Densité : 1,5 g /cm3
- Couleur : noir
■ CR (type Neoprene®)Très bonnes propriétés mécaniques. Bonne résistance aux U.V., aux intempéries, à l’air. Bonne résistance aux acides dilués.Principales caractéristiques
- Température maxi : + 110°C- Température mini : – 20°C- Dureté : 65 shore A - Résistance à la rupture : 40 kg /cm2
- Allongement à la rupture : 200% - Densité : 1,45 g /cm3
- Couleur : noir
Flexibles industrielset compensateurs
Industrial hoses andexpansion joints
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page49
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
50
Diamètre intérieurInternal diameter
ToléranceTolerance
mm inch mm inchmm inch
Diamètre intérieurInternal diameter
1013161925324051
3/8"1/2"5/8"3/4"1"
1"1/41"9/16
2"
Tolérances / TolerancesNorme / Standard: ISO R1307
mm inch
ToléranceTolerance
± 0.40± 0.60± 0.60± 0.60± 0.80± 1.00± 1.00± 1.20
AtmosphèreAtmosphere
0.100.200.300.400.500.600.700.800.901.00
Équivalence atmosphère / colonne d’eauEquivalence atmosphere / water column
Colonne d'eau (m)Water column (m)
1.002.003.004.005.006.007.008.009.0010.15
Bar
Pascal
PSI
Equivalence des unités de pression / Unit conversion table
1
105
14.51
2
2.105
29
3
3.105
43.5
4
4.105
58
5
5.105
72.6
6
6.105
87.1
7
7.105
101.6
8
8.105
116.1
9
9.105
130.6
10
106
145
11
11.105
159.6
12
12.105
174.1
13
13.105
188.6
14
14.105
203.1
15
15.105
217.6
Correspondance pression / température (vapeur saturée)Correspondance pressure / temperature (saturated steam)
± 0.015± 0.024± 0.024± 0.024± 0.030± 0.040± 0.040± 0.047
63,580102127152203254315
2"1/23"1/2
4"5"6"8"10"
12"3/8
± 1.20± 1.40± 1.50± 1.60± 2.00± 2.00± 3.00± 3.00
± 0.047± 0.055± 0.063± 0.063± 0.079± 0.079± 0.118± 0.118
kg / cm3
Pression Pressure
123456789101112
°C kg / cm3 °C
TempératureTemperature
Pression Pressure
TempératureTemperature
99120133143151158164170175179183187
1314151617181920222426
191194197200203206209211216221225
1 bar = 1.02 kg1 bar = 14.5 PSI1 PSI = 0.07 bar
1 l/s = 3.6 m3/h
1 bar = 1.02 kg/cm2
1 pouce / inch = 25.4 mm
1 m = 3.28 pieds / feet1 pied / foot = 0.3 m
1.011
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0 0
100
200
300
400
500
600
700735.5 0.98
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0 0
5
6
7
8
9
1010.33
3028
26
24
22
20
18
16
14
12
10
8
6
4
20 0.01
0.1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
22.02
4
3
2
1
700
760
600
500
400
300
200
100
0760700
600
500
400
300
200
100
0
barO absolu
Abdsolute O
O relatif
ATM
torr
Atm
osp
hèr
e (p
ress
ion
rel
ativ
e)A
tmo
sph
ere
(rel
ativ
e p
ress
ure
)Pr
essi
on
atm
osp
hér
iqu
e / A
tmo
sph
eric
pre
ssu
re
PRES
SIO
N A
BSO
LUE
/ AB
SOLU
TE P
RES
SUR
E
Co
lon
ne
d'e
au (
m)
Wat
er c
olu
mn
(m
)
Pou
ce (
Hg
)
bar
torr
ATA
bar
ATou
ATM
torr bar
1 torr : 1 mm de mercure (Hg)1 AT ou ATU : 735.5 torr ou 0.98 bar1 ATA : 2 bar
Unités de mesure et correspondancesMeasuring units and conversions
Flexibles industrielset compensateurs
Industrial hoses andexpansion joints
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page50
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
51
Réf. / Ref. Désignation / Designation Matière (tube) / Material (tube) Page
Flexibles caoutchouc ou PTFE / Rubber or PTFE hoses
Réf. / Ref.
FX 9510
FX 9540
FX 9541
FX 9511
FX 9512
FX 9513
FX 9530
FX 9520
FX 6500
Désignation / Designation Matériau / Material Page
PVC
PVC
PVC
PVC
PVC
PVC
PP-AU
PVC
Inox / Stainless steel
62
62
63
63
64
64
64
65
66
Tuyau polyvalent PVC armé / General purpose braided PVC hose
Tuyau non toxique spiralé / Non toxique PVC hose wire
Tuyau non toxique spiralé / Non toxique PVC hose wire
Tuyau non toxique spiralé inox / Non toxique hose stainless steel wire
Tuyau refoulement série légère / Discharge hose light type
Tuyau refoulement série lourde / Discharge hose heavy type
Tuyau polyuréthane spiralé acier / Polyurethane hose metal wire
Gaine aspiration PVC spiralé acier / Ducting PVC hose metal wire
Tuyau onduleux inox / Stainless steel flexible hose
Flexibles PVC ou métallique / PVC hoses or metallic
FX 7510
FX 7511
FX 7512
FX 7513
FX 7520
FX 7521
FX 7522
FX 7523
FX 7530
FX 7531
FX 7532
FX 3310
FX 3320
FX 3330
FX 3340
FX 7533
FX 7565
FX 7540
FX 7541
FX 7550
FX 7551
FX 7560
FX 7561
FX 7574
FX 7562
FX 7563
FX 7564
FX 7570
FX 7571
FX 7572
FX 7573
NR / SBR
NR / SBR
NR / SBR
NR / SBR
NR / SBR
NR / SBR
NR / SBR
NR
NR / SBR
NR / SBR
NR / SBR
Pur caoutchouc naturel / Natural rubber
NR / SBR
CSM (type Hypalon®)
NBR / NDA
Pur caoutchouc naturel / Natural rubber
NR / BR
Mélange alimentaire blanc norme FDA / White FDA rubber
Mélange NBR blanc / White rubber
EPDM
SBR
NR
NBR
Film polypropylène PP ou rilsan ou PTFE / Composite PP or rilsan or PTFE
NBR
NBR
NBR
PTFE blanc ou noir lisse / White or black PTFE
Polyéthylène réticulé / EPR
PTFE blanc ou noir convolute / Convulted white or black PTFE
PTFE blanc / White PTFE
53
53
53
53
54
54
54
54
55
55
55
56
56
56
56
57
57
57
57
58
58
58
58
59
59
59
60
61
61
61
61
Tuyau refoulement 2 plis / Water discharge hose 2 plies
Tuyau refoulement 4 plis / Water discharge hose 4 plies
Tuyau extérieur lisse / Hose smooth cover
Tuyau extérieur ondulé / Hose corrugated cover
Tuyau air standard 10 bar / General purpose air hose 10 bar
Tuyau air standard 17.5 bar/ General purpose air hose 17.5 bar
Tuyau air conditions moyennement sévères / Medium duty air hose
Tuyau air conditions sévères / Heavy duty air hose
Tuyau sablage / Sand blast hose
Tuyau dépotage abrasif / Cement discharge hose
Tuyau plâtre, mortie, béton / Plaster grout & concrete hose
Tuyaux de transport de produits abrasifs / Heavy duty materials handling hoses
Tuyaux de transport de produits abrasifs / Heavy duty materials handling hoses
Tuyaux de transport de produits abrasifs / Heavy duty materials handling hoses
Tuyaux de transport de produits abrasifs / Heavy duty materials handling hoses
Tuyau de dépotage granules / Material suction discharge hose
Manchette de drague / Flanged type dredge sleeve
Tuyau liquides alimentaires 2 plis / Food hose 2 plies
Tuyau liquides alimentaires / Food hose
Tuyau vapeur 230°C 17.5 bar / Steam 230°C 17.5 bar hose
Tuyau vapeur 160°C 17.5 bar / Steam 160°C 17.5 bar hose
Tuyau dépotage hydrocarbure / Oil discharge hose
Tuyau hydrocarbure pour barge / Barge oil loading hose
Tuyau dépotage chimie-pétrole / Chemical oil- discharge hose
Tuyau dépotage extérieur lisse / Smooth cover hose
Tuyau dépotage extérieur ondulé / Corrugated cover hose
Flexible dépotage hydrocarbure / Oil suction & discharge hose
Tuyau dépotage PTFE / Suction & discharge hose PTFE
Tuyau dépotage EPR / Suction & discharge hose EPR
Tuyau dépotage PTFE convulté / Discharge hose PTFE convolted
Tuyau dépotage PTFE lisse / Suction & discharge hose PTFE
Gamme / Range
Flexibles industriels Industrial hoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page51
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
52
.............................................................................................................................................................................................................................................................................................................................................................................................................
.............................................................................................................................................................................................................................................................................................................................................................................................................
.............................................................................................................................................................................................................................................................................................................................................................................................................
.............................................................................................................................................................................................................................................................................................................................................................................................................
.............................................................................................................................................................................................................................................................................................................................................................................................................
Client / Customer : .................................................................................
Coordonnées / Address : .......................................................................................................................................................................................................................................
Tél. / Phone : .............................................................. Fax : ..................................................................... E-mail : .................................................................................................
Interlocuteur / Sender :........................................................................ Fonction / Function : .............................................................................
Pays / Country : ......................................................
Coordonnées client / Address details
Date : .................... /.................... /.....................
Désignation / Designation
DN / DN
Référence / Reference
Longueur / Length
Quantité / Quantity
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
Commentaires / Comments
Tube intérieur / Lining
Épaisseur / Thickness
Revêtement extérieur / Cover
Tresse / Layer
Extrémité 1 / End termination 1 Oui / Yes Non / No
Raccor dement / End
Type / Type
Matière / Material
PN / PN
Référence / Reference
Fi xat i on / Fitting
Aut r es / Others
Type / Type
Matière / Material
Référence / Reference
Extrémité 2 / End termination 2 Oui / Yes Non / No
Raccor dement / End
Type / Type
Matière / Material
PN / PN
Référence / Reference
Fi xat i on / Fitting
Aut r es / Others
Type / Type
Matière / Material
Référence / Reference
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................................................................................................................................................................
................................................................................................................................................................................................
................................................................................................................................................................................................
................................................................................................................................................................................................
................................................................................................................................................................................................
................................................................................................................................................................................................
................................................................................................................................................................................................
................................................................................................................................................................................................
................................................................................................................................................................................................
................................................................................................................................................................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
................................................
Construction / Construction
Raccordement / Ends terminations
Fiche de renseignements techniques / Technical data sheet
Conditions de service / Working specifications
Pression de service / Working pressure
Fluide / Fluid
Dépression / Vacuum
Aspiration et refoulement / Charge and discharge
Température / Temperature
FLEXIBLES INDUSTRIELS / INDUSTRIAL HOSESPoste 1 / Item 1 Poste 2 / Item 2 Poste 3 / Item 3 Poste 4 / Item 4
Flexibles industriels Industrial hoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page52
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
53
FX7510 Tuyau refoulement 2 plis / Water discharge hose 2 plies
RéférenceReference
MatériauxMaterials
CaractéristiquesPhysical property
Application : pour pompede refoulement, léger et enroulable
Tube : mélange de NR et SBR noir
Armature : tresse textilehaute ténacité
Revêtement : mélange de NR et SBR noir
Application: for dischargepump light in weight easily coilable
Tube: NR & SBR compounded, black color
Reinforcement: high tensile synthetic cords
Cover: NR & SBR compounded, black color
ø intérieurI.D.
inch1" 1/2
2"2" 1/2
3"4"6"8"10"
38.150.863.576.2101.6152.4203.2254.0
46.158.871.584.2
110.0162.4213.2264.0
10101010107.05.03.5
6060606060606030
0.801.011.221.431.983.484.565.64
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
FX7511 Tuyau refoulement 4 plis / Water discharge hose 4 pliesApplication : pour pompede refoulement, léger et enroulable
Tube : mélange de NR etSBR, noir
Armature : tresse textilehaute ténacité
Revêtement : mélange deNR et SBR noir
Application: for dischargepump light in weight easilycoilable
Tube: NR & SBR compounded, black color
Reinforcement: high tensile synthetic cords
Cover: NR & SBR compounded, black color
ø intérieurI.D.
inch1" 1/2
2"2" 1/2
3"4"
4" 1/25"6"8"10"12"
38.150.863.576.2101.6114.3127.0152.4203.2254.0304.8
50.963.676.389.0
114.4127.1139.8165.2216.8267.6318.4
17171717151010101088
6060606060606060603030
1.201.541.892.182.873.173.514.156.057.488.99
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
FX7512 Tuyau aspiration-refoulement extérieur lisseWater suction & discharge hose smooth coverApplication : pour aspira-tion d’eau et alimentationdans l’industrie, l’agricul -ture et le bâtiment
Tube : mélange de NR et SBR, noir
Armature : tresse textile et spire inox noyée.
Revêtement : bonne résistance à l’abrasion etaux intempéries. Mélangede NR et SBR noir ou 30%EDPM extérieur lisse
ø intérieurI.D.
inch1"
1" 1/41" 1/2
2"2" 1/2
3"4"5"6"8"10"12"
25.431.838.150.863.576.2101.6127.0152.4203.2254.0304.8
37.343.750.063.275.989.1
115.0144.4173.0226.4281.2332.0
10101010107755555
606060606060606060303030
0.921.081.241.772.142.833.655.377.3910.7915.4718.37
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure L max
150200250300375500700625900140020002750
mm
R.D.C.Bend radius
PoidsWeight
FX7513 Tuyau aspiration-refoulement extérieur lisseWater suction & discharge hose smooth coverApplication : pour aspira-tion d’eau et alimentationdans l’industrie, l’agricul -ture et le bâtiment
Tube : mélange de NR et SBR, noir
Armature : tresse textile et spire inox noyée.
Revêtement : bonne résistance à l’abrasion etaux intempéries. Mélangede NR & SBR noir ou 30%EDPM extérieur lisse
ø intérieurI.D.
inch3"4"5"6"8"10"
76.2101.6127.0152.4203.2254.0
90.0116.2147.1173.9226.2284.6
101010101010
606060603030
2.934.016.838.7212.9221.20
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure L max
5007001000120016002500
mm
R.D.C.Bend radius
PoidsWeight
* Pression de service / Working pressure.Autres diamètres possibles sur demande / Any other sizes are available on request.
Application: for water suction & delivery in industry, agriculture andconstruction
Tube: NR & SBR compounded, black color
Reinforcement: syntheticcords and helix stainlesssteel wire
Cover: tough abrasion and weather resistant,black, NR & SBR or EDPM30% compounded, smooth wrapped surface
Application: for water suction & delivery in industry agriculture andconstruction
Tube: NR & SBR compounded, black color
Reinforcement: syntheticcords and helix stainlesssteel wire
Cover: tough abrasion and weather resistant,black, NR & SBR or EDPM30% compounded, smooth wrapped surface
Flexibles industrielsen élastomère
Rubber industrialhoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page53
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
54
ø intérieurI.D.
inch3/8"1/2"3/4"1"
9.512.719.125.4
17.822.230.239.7
10101010
1001005030
0.290.330.660.90
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
inch3/8"1/2"3/4"1"
9.512.719.125.4
18.923.031.840.5
17171717
1001005030
0.310.420.720.96
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
inch1/2"3/4"1"
1" 1/22"
2" 1/23"4"
12.719.125.438.150.863.576.2101.6
24.731.137.450.164.478.796.2
121.6
7070503535303030
6060606060606060
0.760.951.141.522.242.965.096.48
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
inch1/2"3/4"1"
1" 1/22"
2" 1/23"4"
12.719.125.438.150.863.576.2101.6
24.731.137.853.366.880.393.0
119.2
2020202020202015
6060606060606060
0.600.750.951.542.052.643.074.15
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
FX7520 Tuyau air standard 10 bar / General purpose air hose - 10 bar (150 PSI)Application : pour applica-tions standards, excellenterésistance à la chaleur, aux intempéries, à l’ozone,aux huiles animales et végétales
Tube : mélange de NR et SBR, noir
Armature : trame synthétique
Revêtement : mélange de NR et SBR noir
Application: for low pressureair applications requiring outstanding resistance to heat weather and ozone.Have good resistance to animal fats and vegetable oils
Tube: NR & SBR compounded,black color
Reinforcement: syntheticyarms applied by special process
Cover: NR & SBR compounded, black color
RéférenceReference
MatériauxMaterials
CaractéristiquesPhysical property
FX7521 Tuyau air standard 17 bar / General purpose air hose - 17 bar (250 PSI)
Application : pour applica-tions standards, excellenterésistance à la chaleur aux intempéries, à l’ozone,aux huiles animales et végétales
Tube : mélange de NR et SBR, noir
Armature : trame synthétique
Revêtement : mélange de NRet SBR noir
Application: for low pressureair applications requiring outstanding resistance to heat weather and ozone.Have good resistance to animal fats and vegetable oils
Tube: NR & SBR compounded,black color
Reinforcement: syntheticyarms applied by special process
Cover: NR & SBR compounded, black color
FX7522 Tuyau air conditions moyennement sévères / Medium duty air hose Application : pour applica-tions standards dans lesmines, les carrières et lesapplications d’air industriel
Tube : mélange de NR et SBRnoir résistance à la chaleur etrésistance électrique
Armature : tresse textilehaute ténacité
Revêtement : mélange de NRet SBR noir, liseré jaune
Application: for medium duty in mines quarries, drilland type to industrial air service
Tube: NR & SBR compounded,black color heat and electricalresistance
Reinforcement: high tensilesynthetic cords
Cover: NR & SBR compoun-ded, black color surface withyellow stripe
FX7523 Tuyau air conditions sévères / Heavy duty air hose Application : pour travauxsévères dans les mines, les carrières, le bâtiment, l’offshore et les dépotages
Tube : NR noir résistance aux huiles, à la chaleur et à l’électricité
Armature : tresse textilehaute ténacité
Revêtement : mélange de NR et SBR, couleur jaune,excellente résistance à l’abrasion, à la flamme et à l’électricité
Application: for excellent service life in rough applica-tion hard rock mining, quarries, construction, offshore and ship yards
Tube: NR compounded, black color, oil mist, heat and electrical resistance
Reinforcement: high tensilesynthetic cords
Cover: NR & SBR compoun-ded, yellow color for outstan-ding resistance to abrasion,fire and electric resistance
* Pression de service / Working pressure.
Autres diamètres possibles sur demande / Any other sizes are available on request.
Flexibles industrielsen élastomère
Rubber industrialhoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page54
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
55
ø intérieurI.D.
inch1/2"3/4"1"
1" 1/41" 1/2
131925323842
273339505660
121212121212
404040404040
0.500.650.801.301.501.65
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
130190250320380420
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
inch40405050
60607070
20202020
40204020
1.851.852.152.15
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
400400500500
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
inch1"
1" 3/8253550
395068
404040
404040
0.801.201.95
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
250350500
mm
R.D.C.Bend radius L max Poids
Weight
FX7530 Tuyau sablage 2 plis /Sand blast hose 2 pliesApplication : pour toutes les applications de sablageet de projection de produitsabrasifs
Tube : mélange de NR etSBR noir, très haute résistance à l’abrasion,conducteur de l’électricitéstatique
Armature : trame coton
Revêtement : mélange àbase de NR et SBR noir,résistant aux intempéries et à l’abrasion
Application: for sand andshot blasting, abrasivematerials
Tube: NR & SBR compounded, black color,highly abrasion resistanceand static conductive
Reinforcement: cottonfabric ply
Cover: NR & SBR compounded, black colorweather and abrasion resistance
FX7531 Tuyau dépotage abrasif /Cement discharge hoseApplication : pour toutes les applications de sablageet de projection de produitsabrasifs
Tube : mélange de NR etSBR noir, haute résistance à l’abrasion
Armature : deux nappes de tresse synthétique
Revêtement : mélange à base de NR et SBR noir,résistance aux intempérieset à l’abrasion
Application: for handingdry materials, black color,abrasion resistant
Tube: NR & SBR compounded, black color,abrasion resistant
Reinforcement: two plies of synthetic cord
Cover: NR & SBR compounded, black colorweather and abrasion resistance
FX7532 Tuyau plâtre, mortier et béton / Plaster grout & concrete hoseApplication : pour toutes les applications de manu-tention de produits abrasifs, tels que plâtre, mortier et béton dans lesconditions sévères d’utilisation
Tube : mélange de NR etSBR noir, très haute résistance à l’abrasion
Armature : tresses synthé-tiques haute ténacité
Revêtement : mélange à base de NR et SBR noir,résistant aux intempéries et à l’abrasion
Application: for handingcase, abuse resistance andlong service life required for plaster, grout and concrete placement applications
Tube: NR & SBR compounded, black color,highly abrasion resistance
Reinforcement: high tensilesynthetic cords
Cover: NR & SBR compounded, black colorweather and abrasion resistance
RéférenceReference
MatériauxMaterials
CaractéristiquesPhysical property
* Pression de service / Working pressure.
Autres diamètres possibles sur demande / Any other sizes are available on request.
Flexibles industrielsen élastomère
Rubber industrialhoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page55
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
56
FX3320 Applications : transportpneumatique de matièresabrasivesTube : NR/BR, noir, résistant à l'usure souple,anti-statique, dureté 55 ±5 Shore A Température d'utilisation :–35°C à +70°CJoint : réf. DI 3312
Applications: pneumatictransport of abrasive materials, highly abrasionresistance Tube: NR / BR compositepolymer, black, antistatic,hardness 55 ±5 Shore AOperating temperature:–35°C to +70°CGasket: ref. DI 3312
RéférenceReference
MatériauxMaterials
Autres diamètres possibles sur demande / Any other sizes are available on request.
FX3330 Applications : transport de liquides corrosifsTube : CSM (type Hypalon®),clair, très bonne résistanceaux acides inorganiques, nonconducteur de l'électricité,dureté 55 ±5 Shore A Température d'utilisation :–35°C à +95°CJoint : réf. DI 3312 HY
Applications: hydraulictransport of corrosiveliquids Tube: CSM (type Hypalon®)light tone, highly resistanceto anor ganic acids, non-conductive, hardness55 ±5 Shore AOperating temperature:–35°C to +95°CGasket: ref. DI 3312 HY
FX3340 Applications : transportpneumatique de matériauxsolides et poudreuxTube : mélange spécial NBR/Semperline, blanc,résistance aux huiles à l'abrasion, qualité alimen-taire, antistatique, dureté55 ±5 Shore A Température d'utilisation :–35°C à +85°CJoint : réf. DI 3312 LM
Applications: pneumatictransport of solid and powdery foodstuffs, specialmaterial Tube: NBR/Semperline,white oil, acid, abrasion-resistance, food quality,antistatic, hardness 55 ±5 Shore AOperating temperature:–35°C to +80°CGasket: ref. DI 3312 LM
DN
mm515360
63.570768290102108114127133140152178203254305340355388405
7588888898116116133134134164164164178190217243294349391406442458
4040404040404040402020202020201212121212121212
3.04.04.04.04.07.07.09.08.07.014.012.010.013.014.016.018.022.028.037.037.044.047.0
mm m kg/m
ø extérieurO.D.
30030030030030035040050050050065065065070075012001750200025003000300035003500
mmmm
R.D.C.Bend radius
Epaisseur tubeThickness tube L max Poids
Weight
58.57
5.67
5.68
12.5751375
7.57.5888888109
FX3310
Tuyaux de transport de produits abrasifs / Heavy duty materials handing hosesApplications : transporthydraulique de matièresabrasivesTube : pur caoutchouc naturel, clair, très résistant à l'usure souple, nonconducteur de l'électricité,dureté 40 ±5 Shore ATempérature d'utilisation : –35°C à +70°CJoint : réf. DI 3312Pression de service : 10 bar
Applications: hydraulictransport of abrasive materials.Tube: pure natural rubber,light tont, wear-resistantand elastic, non-conductive,hardness 40 ±5 Shore A.Operating temperature:–35°C to +70°CGasket: ref. DI 3312Working pressure: 10 bar
CaractéristiquesPhysical property
1
5 6 7
1 2
3 4
1
1. Renfort textile / Reinforcing plies of special cord fabric
2. Revêtement noir (polychloroprene), bonne résistance au vieillissement et à l’eau de mer, conducteur, résistant aux huilesBlack cover, CR, abrasion, weather and sea ware-resistant, conductive, oil resistant
3. Joint Sigma (renforcé textile)Sigma coupling (textile reinforced)
4. Raccord Sigma : aluminium, résistant aux chocs, brides plates intérieur annelé au même pas que les tuyaux Sigma seal: impact-resistant aluminium, split flanges, inner corrugation forms snug fit with hose cover
5. Tube variable / Thick wear layer
6. Spire métal / Steel helix
7. Gomme intermédiaire / Intermediate ply
Flexibles industrielsen élastomère
Rubber industrialhoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page56
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
57
ø intérieurI.D.
inch1" 1/41" 1/21" 3/4
2"2" 1/162" 3/82" 1/2
3"3" 1/83" 1/2
4"
384045515260
63.5768088102
495156626372768993102116
66666666666
4040-
4040404040-
2020
1.261.321.451.691.652.092.302.903.003.514.12
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
100120135150160220240300310350400
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
inch1/4"1/2"3/4"1"
13161925
21252837
10101010
-404040
0.260.370.410.70
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
inch1"
1" 1/41" 1/2
2"2" 1/2
3"4"5"6"8"10"12"
25.431.838.150.863.576.2101.6127.0152.4203.2254.0304.8
46.853.259.573.285.999.6
125.8154.4180.0237.8292.4345.2
151515101010755333
606060606060603030303030
1.892.182.463.333.955.006.558.289.8316.3322.1527.53
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
150200250300375500700625900140020002750
mm
R.D.C.Bend radius L max Poids
Weight
FX7533 Tuyau dépotage granules / Material suction & discharge hoseApplication : pour toutes les applications de transportet de chargement de produits en grains de blé,maïs, etc.
Tube : pur gomme, tubetan, résistance à l’abrasion
Armature : tresses synthétiques avec spire inox de renfort
Revêtement : mélange àbase de NR et SBR vert,résistant aux intempéries et à l’abrasion
Application: for suction and discharge of beans,wheat barley, corn and another grains
Tube: pure gum tan color,abrasion resistant
Reinforcement: syntheticcord and helix steel wire
Cover: NR & SBR compounded, green colorweather and abrasion resistance
RéférenceReference
MatériauxMaterials
CaractéristiquesPhysical property
FX7540
Application : pour aspira-tion et refoulement deliquide alimentaire, lait,sirop, jus
Tube : mélange alimentaireblanc norme FDA
Armature : tresse textilehaute ténacité, spire inox
Revêtement : mélangeEPDM, bleu
Application: for charge and discharge food liquid,milk, juice
Tube: food compounded,white FDA agrement
Reinforcement: high tensilesynthetic cords, stainlesssteel wire
Cover: EDPM compounded,blue color
FX7541 Tuyau refoulement liquides alimentaires / Food discharge hoseApplication : pour pompede refoulement, lavage des sols
Tube : mélange NBR, couleur blanc FDA
Armature : tresse textilehaute ténacité
Revêtement : mélange de NR bleu
Application: for dischargepump, ground wash
Tube: NR compounded,white color FDA agreement
Reinforcement: high tensilesynthetic cords
Cover: NR compounded,blue color
* Pression de service / Working pressure.
Autres diamètres possibles sur demande / Any other sizes are available on request.
Tuyau aspiration refoulement liquides alimentairesFood suction & discharge hose 2 plies hose
16" 18" 20" 22" 24" 26" 28" 30" 32"
15 15 20 20 20 20 25 25 25
Epaisseur du tube (mm) / Tube thickness (mm)
ø intérieurI.D.
inch16"18"20"22"24"26"28"30"32"
410460510560610660710760810
5-76-87-98-109-1110-1211-1312-1514-15
120013001400150015001600170017001800
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
FX7565 Manchette de drague (à bride) / Flanged type dredge sleeve Application : manchette deliaison - application drague et offshore
Tube : mélange NR et SBRcouleur noir très épais, trèshaute résistance à l’abrasion
Armature : tresse synthétiquehaute ténacité
Revêtement : mélange NR et SBR couleur noire.Résistance aux intempéries et à l’abrasion
Raccordement :construction à bridePN - ANSI
Application: flexible jonction between pipe - sections in dredging service
Tube: NR & SBR compoundedblack color extra thick, highly abrasion resistance
Reinforcement: high tensilesynthetic cords
Cover: NR & SBR compounded black color,weather and abrasion resistance
Fitting: built-in metal flangePN - ANSI
Flexibles industrielsen élastomère
Rubber industrialhoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page57
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
58
ø intérieurI.D.
inch10131619253035404551
20232630374550566267
8888888888
2020202020202020-
20
0.240.290.350.450.650.961.201.251.501.55
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
FX7551 Tuyau vapeur 170°C 6 bar / Steam 170°C 6 bar hoseApplication : pour toutes lesapplications de vapeur dansl’industrie température d’utilisation jusqu’à 170°C
Tube : mélange SBR, noir,haute température
Armature : tresse textile
Revêtement : EPDM noir,bande rouge
Application: for generalsteam service with temperature up to 170°C
Tube: heat resistant SBR compounded black color
Reinforcement: syntheticcords
Cover: EPDM black color, red strip
FX7560 Tuyau dépotage hydrocarbure / Oil discharge hoseApplication : pour toutes lesapplications de production de pétrole ou d’huile commehuile minérale, graisse, essence. Tuyau léger et enroulable
Tube : mélange NR noir
Armature : trame synthétiquehaute ténacité, possibilitéspire antistatique
Revêtement : mélange à base de CR noir, excellente résistance au soleil, auxintempéries à l’ozone et à l’abrasion
Application: all-round hosefor petrol and another oilproducts such as mineral oil,grease and gasoline. Flexible,flat rollables, light weight
Tube: compounded NR blackcolor
Reinforcement: high tensilesynthetic cords can be supplied with anti-static wirewhen required
Cover: CR compounded, blackcolor for excellent resistanceto sunlight, weather, ozoneand abrasion
MatériauxMaterials
ø intérieurI.D.
inch1"
1" 1/41" 1/2
2"2" 1/2
3"4"5"6"8"
25.431.838.150.863.576.2101.6127.0152.4203.2
37.243.649.964.077.190.8
119.8147.5174.3226.6
10101010101010101010
60606060606060606030
0.951.111.271.902.383.154.866.828.7512.93
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
150200250300400500700100012001600
mm
R.D.C.Bend radius L max Poids
Weight
* Pression de service / Working pressure.
Autres diamètres possibles sur demande / Any other sizes are available on request.
FX7550 Tuyau vapeur 230°C 17 bar / Steam 230°C 17 bar hoseApplication : pour toutes lesapplications de vapeur dansl’industrie température d’utilisation jusqu’à 230°C
Tube : EPDM noir
Armature : tresse acier
Revêtement : EPDM noir,bande rouge
Application: for generalsteam service with temperature up to 230°C
Tube: EPDM black color
Reinforcement: steel cords
Cover: EPDM black color,red strip
ø intérieurI.D.
inch1013161925303235404551
2023263037455056626780
1717171717171717171717
202020
20/6020/60
20202020-
20
0.360.530.610.680.901.191.301.501.652.022.44
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
RéférenceReference
CaractéristiquesPhysical property
FX7561 Tuyau hydrocarbure pour barge / Barge oil loading hoseApplication : tuyau de cons-truction très robuste pour lespostes de chargement et dedéchargement des barges etdes tankers
Tube : mélange de NBR noir
Armature : tresse synthétiqueavec spire de renfort inoxnoyée.
Revêtement : mélange de CR noir bonne résistance à l’abrasion les intempéries et les huiles
Application: a robust heavyduty hose suitable for loadingand unloading petroleumproducts from barges or tankers of suction and discharge service
Tube: NBR compounded,black color
Reinforcement: synthetic cordsand helix stainless steel wire
Cover: CR compounded, black color oil weather, oiland abrasion resistance
ø intérieurI.D.
inch2"3"4"6"
50.876.2101.6152.4
67.294.8121.0177.9
20202020
60606060
2.283.825.109.77
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
3005007001200
mm
R.D.C.Bend radius L max Poids
Weight
Flexibles industrielsen élastomère
Rubber industrialhoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:37 Page58
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
59
ø intérieurI.D.
inch1" 1/2
2"3"4"6"
38.150.876.2101.6152.4
51.765.291.8118.8175.0
1010101010
6060606060
1.301.782.713.917.43
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
150200375500900
mm
R.D.C.Bend radius L max Poids
Weight
FX7563 Tuyau dépotage pétrochimie extérieur ondulé / Corrugated cover tank truck hoseApplication : pour toutes lesapplications de chargementet de déchargement de produit pétrochimique àpartir des tankers
Tube : mélange NBR noir
Armature : tresses synthé-tiques avec spire inox derenfort noyée
Revêtement : mélange à base de CR noir, liseré orange résistant aux intempéries, à l’huile et àl’abrasion aspect convolutépour résistance à l’écrasement
Application: for loading and unloading petrochimi-cal products from tankers.For suction and dischargeservice
Tube: NBR compoundedblack color
Reinforcement: syntheticcords and helix stainlesssteel wire
Cover: CR compounded,black color orange stripeweather, oil and abrasionresistance corrugated forkink resistance
MatériauxMaterials
* Pression de service / Working pressure.
Autres diamètres possibles sur demande / Any other sizes are available on request.
FX7562 Tuyau dépotage pétrochimie extérieur lisse / Smooth cover tank truck hose Application : pour toutes lesapplications de chargementet de déchargement de pro-duit pétrochimique à partirdes tankers en aspiration ourefoulement
Tube : mélange NBR noir
Armature : trame synthétiqueavec spire inox de renfortnoyée.
Revêtement : mélange à basede CR noir, liseré rougerésistant aux intempéries, à l’huile et à l’abrasion aspect
Application: for loading andunloading petrochimical products from tankers. For suction and discharge service
Tube: NBR compounded black color
Reinforcement: synthetic cordsand helix stainless steel wire
Cover: CR compounded, black color red stripe weather, oil and abrasionresistance
ø intérieurI.D.
inch1" 1/2
2"3"4"6"
38.150.876.2101.6152.4
49.963.690.0117.0173.9
1010101010
6060606060
1.161.682.703.898.23
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
2503005007001200
mm
R.D.C.Bend radius L max Poids
Weight
FX7574 Tuyau dépotage produits chimiques - pétrolierChemical oil suction & discharge hoseApplication : pour les applications de transport etde chargement de produits chimiques et dérivés du pétrole
Tube : film polypropylène /rilsan / PTFE
Armature : spire acier galvanisé ou inox
Revêtement : film polypropylène, spire aciergalvanisé ou inox
Raccordement : à bride PNou ANSI,raccord 1/2 symétrique enaluminium bronze ou inox,raccord fileté mâle oufemelle à souder, raccord à came en aluminium, bronze ou inox
Application: for a widerange of chemicals andpetroleum product, suction and discharge
Tube: polypropylene film /rilsan / PTFE
Reinforcement: steel galvanised or stainless steel wire
Cover: polypropylene film,steel galvanised or stainlesssteel wire
Ends: flanged PN or ANSI,Guillemin half coupling in aluminium bronze or stainless steel, screwed threaded or butwelding ends, cam and groove coupler in in aluminium bronze or stainless steel
ø intérieurI.D.
inch253240506580100
364352
63.578.593.5116.5
10101010101010
20202020202020
0.770.861.302.032.356.164.20
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
60606590
100130165
mm
R.D.C.Bend radius L max Poids
Weight
RéférenceReference
CaractéristiquesPhysical property
Flexibles industrielsen élastomère
Rubber industrialhoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page59
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
60
FX7564 Flexible de dépotage pour hydrocarbures, pétrole, chimie...Oil, petrol, chemical... suction & discharge hoseApplication : pour toutes les applications de charge-ment et de déchargementde produits pétroliersconforme à la norme BS1435 1987 type S7, S10 ou S15
Tube : NBR noir / EPDM /CSM (type Hypalon®)
Armature : trame synthétique avec spire inox de renfort
Revêtement : mélange à base de CR noir, résistanceaux intempéries, à l’huile et à l’abrasion
Raccordement :construction à bridePN - ANSI
Application: for loading and unloading of gasoline,cude oil, heavy oil otherpetroleum bas productsThis hose is in accordancewith BS 1435 1987 type S7,S10 or S15
Tube: NBR black color /EPDM / CSM (typeHypalon®)
Reinforcement: syntheticcords and helix stainlesssteel wire
Cover: CR compounded,black color red stripe weather, oil and abrasionresistance
Fitting: built-in flangesPN - ANSI
RéférenceReference
MatériauxMaterials
CaractéristiquesPhysical property
ø intérieurI.D.
inch2"3"4"6"8"10"12"
50.876.2101.6152.4203.2254.0304.8
2"3/43"3/44"7/87"1/89"3/811"5/813"5/8
69.895.2
123.8181
236.6293.8346.6
15151515999
3.204.807.6014.224.534.043.0
mm inch mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
350450600850110013501600
mm
R.D.C.Bend radius L max Poids
Weight
7 bar / 100 PSI
ø intérieurI.D.
inch2"3"4"6"8"10"12"
50.876.2101.6152.4203.2254.0304.8
2"3/43"3/4
5"7"1/49"1/212"1/814"3/8
69.895.2127
184.2241.8308
365.0
15151515999
3.204.808.0015.826.340.651.4
mm inch mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
350450600850110013501600
mm
R.D.C.Bend radius L max Poids
Weight
10.5 bar / 150 PSI
ø intérieurI.D.
inch2"3"4"6"8"10"12"
50.876.2101.6152.4203.2254.0304.8
2"13/163"15/165"1/167"5/169"5/812"1/414"5/8
71.4100.1128.6185.7244.5311.2371.5
15151515999
3.855.408.7017.229.044.756.5
mm inch mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
350450600850110013501600
mm
R.D.C.Bend radius L max Poids
Weight
17 bar / 225 PSI
* Pression de service / Working pressure.
Autres diamètres possibles sur demande / Any other sizes are available on request.
Extrémités standard pour flexibles caoutchouc / End terminations fitting types for rubber hoses
Bride avec embouts montage par colliersRibbed tail strapped in
Bride tournante sur collet caoutchoucBeaded end swivel flange
Bride fixe vulcanisée Integral fixed flange
Manchettes forcées Enlarged soft cut
Manchettes lissesStandard soft cut
Flexibles industrielsen élastomère
Rubber industrialhoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page60
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
61
FX7570 Tuyau dépotage produits chimiques - tube PTFEChemical suction & discharge hose - PTFE tubeApplication : pour les applications de transport etde chargement de produitschimiques très corrosifs
Tube : PTFE blanc ou noir lisse
Armature : tresse synthétiqueet spire inox de renfort
Revêtement : mélange à basede EPDM vert, résistance auxintempéries et à l’abrasion
Application: for a wide rangeof chemicals, solvents, highlycorrosive liquids in both pressure and suction service
Tube: PTFE white or blackcolor
Reinforcement: synthetic cordsand helix stainless steel wire
Cover: EPDM compounded,green core weather and abrasion resistance
FX7571 Tuyau dépotage produits chimiques - tube EPRChemical suction & discharge hose - EPR tubeApplication : pour la plupartdes applications de transportet de chargement de produitschimiques
Tube : polyethylène reticulé
Armature : tresses synthéti -ques avec spire inox derenfort
Revêtement : mélange à basede EPDM vert, résistance auxintempéries et à l’abrasion
Application: for a wide range of chemicals, solventscorrosive liquids in both pressure and suction service
Tube: cross linked polyethylene
Reinforcement: synthetic cordsand helix stainless steel wire
Cover: EPDM compounded,green core weather and abrasion resistance
FX7572 Tuyau dépotage produits chimiques - PTFE convultéChemical suction & discharge hose - PTFE convoltedApplication : pour les applica-tions de transport et de pro-duits chimiques très corrosifs
Tube : PTFE blanc ou noirconvolute
Armature : possibilité spireinox
Revêtement : tresse polyéthy-lène, polypropylène ou inoxsur demande
Application: for a wide rangeof chemicals, solvents, highlycorrosive liquids in both pressure and suction service
Tube: PTFE white or blackcolor convoluted
Reinforcement: stainless steelwire on request
Cover: polyethylene, polypropylene or stainlesssteel on request
RéférenceReference
MatériauxMaterials
CaractéristiquesPhysical property
ø intérieurI.D.
inch1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
1319253240506580100
0.911.251.501.752.052.653.23.74.7
35.035.031.522.421.017.514.010.510.5
0.160.280.340.440.540.631.071.1
mm inch mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
761151522292793435085581016
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
inch1925323851
63.576102
3037445265
78.594122
1010101010101010
0.540.750.911.211.532.012.864.25
mm inch mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
inch3/8"1/2"5/8"3/4"1"
1" 1/41" 1/2
2"3"4"
9.2712.7516.1019.4625.1231.9338.4650.8075.9100.7
14.4818.3622.6626.1132.1339.0144.9357.5188.24113.59
69869676696952341710
0.180.300.500.570.640.790.971.093.425.21
mm inch mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
254050658090120140385610
mm
R.D.C.Bend radius L max Poids
Weight
* Pression de service / Working pressure.
Autres diamètres possibles sur demande / Any other sizes are available on request.
ø intérieurI.D.
inch1/8"3/16"1/4"5/16"3/8"1/2"5/8"3/4"1"
4.654.856.458.159.9313.0616.119.325.6
8.899.07
10.4712.5714.6818.0920.8825.5330.79
32231025323720618913312693
0.150.150.180.240.310.410.470.550.73
mm inch mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
757585130135165195225305
mm
R.D.C.Bend radius L max Poids
Weight
FX7573 Tuyau dépotage produits chimiques - PTFE lisse Chemical suction & discharge hose - Smooth PTFEApplication : pour les applications de transport et de chargement de produits chimiques très corrosifs
Tube : PTFE blanc
Armature : tresse inox
Revêtement : tresse poly-éthylène, polypropylène ou inox sur demande
Application: for a widerange of chemicals, solvents, highly corrosiveliquids in both pressure and suction service
Tube: PTFE white
Reinforcement: stainlesssteel cords
Cover: polyethylene, polypropylene or stainlesssteel on request
Flexibles industrielsen élastomère
Rubber industrialhoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page61
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
62
FX9510 Tuyau polyvalent PVC armé pour usages multiplesGeneral purpose braided PVC hose Couleur : translucide
Diamètre : DN 4 à 50 mm
Pression de service :de 8 à 20 bar
Température maxi : –15°C / 60°C
Armature : textile
Options : autre couleur possible
Color: crystal
Diameter: DN 4 to 50 mm
Working pressure:from 8 to 20 bar
Temperature: –15°C / 60°C
Reinforcement: textile
Option: other color onrequest
ø intérieurI.D.
468101213151619253032384050
81214161819212226333842485264
2020151515151515151088888
25-5025-5025-5025-5025-5025-5025-5025-5025-5025-5025-5025-5025-5025-5025-50
0.440.600.670.760.910.991.101.161.512.263.023.764.426.048.61
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
FX9540 Tuyau non toxique en PVC spiralé pour l’industrie alimentaireNon toxique PVC hose wire for food industryCouleur : rouge
Diamètre : DN 20 à 150 mm
Pression de service :de 4 à 10 bar
Température maxi : –10°C / 60°C
Color: red
Diameter: DN 20 to 150 mm
Working pressure:from 4 to 10 bar
Temperature: –10°C / 60°C
ø intérieurI.D.
202530323538404551556070768090102110120152
26.632
37.439.443
46.448.653.860
64.269.480.28792103116
124.4135169
1011111010101099
8.58
7.57665554
25252525252525252525252525252525252525
0.300.400.500.530.610.690.730.901.071.211.311.651.711.962.312.713.113.415.31
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
190210230230250270310350360390430490510540610630720970
mm
R.D.C.Bend radius L max Poids
Weight
RéférenceReference
MatériauxMaterials
CaractéristiquesPhysical property
* Pression de service / Working pressure.
Autres diamètres possibles sur demande / Any other sizes are available on request.
Flexibles industrielsPVC et inox
PVC and stainless steelindustrial hoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page62
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
63
MatériauxMaterials
FX9541 Tuyau non toxique en PVC spiralé pour aliments et boissonsNon toxique PVC hose wire for foods and beverageCouleur : translucide
Diamètre : DN 15 à 300 mm
Pression de service :de 1 à 10 bar
Température maxi : –10°C / 60°C
Armature : spire PVC
Color: crystal
Diameter: DN 15 to 300 mm
Working pressure:from 1 to 10 bar
Temperature: –10°C / 60°C
Reinforcement: helix PVC
FX9511 Tuyau non toxique en PVC lisse spiralé inox excellente flexibilité haute résistanceNon toxique smooth PVC hose stainless steel wire maximum strength and flexibilityCouleur : translucide
Diamètre : DN 13 à 150 mm
Pression de service :de 2,5 à 15 bar
Température maxi : –10°C / 70°C
Armature : spire métal
Color: crystal
Diameter: DN 13 to 150 mm
Working pressure:from 2.5 to 15 bar
Temperature: –10°C / 70°C
Reinforcement: helix steel
RéférenceReference
CaractéristiquesPhysical property
ø intérieurI.D.
152025303235384045515560636570768090102110120125152203254300
20.425.830.836
38.241.845.247.653.259.463.468.471.473.679.285.690.4101114
122.2132.4139
166.8220272320
108888888777776665555432211
303030303030303030303030303030303030303030303020106
0.200.260.320.380.410.500.540.570.690.820.900.981.001.061.211.401.591.862.212.542.813.204.306.508.5010.50
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
85110145150160175190200220230260290300310335355370435490535680740880
115015001800
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
13162025303235384042455160636570768090102110120125152
19.222.22733
38.440.443.6465
51.854.861.87274
77.283.489.492.6103117
124.4134141172
1515151312121110109.59.598
7.57
6.565
4.5444
3.52.5
303030303030303030303030303030303030303030303030
0.210.260.340.520.630.660.750.800.951.001.151.331.751.801.902.102.302.502.933.733.853.954.606.60
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
2632405060647076808490102120126130140152160180204210220250304
mm
R.D.C.Bend radius L max Poids
Weight
* Pression de service / Working pressure.
Autres diamètres possibles sur demande / Any other sizes are available on request.
Flexibles industrielsPVC et inox
PVC and stainless steelindustrial hoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page63
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
64
FX9512 Tuyau refoulement d’eau série légère aplatissableDischarge PVC hose easily coilable - light typeCouleur : orange
Diamètre : DN25 à 150 mm
Pression de service :de 3 à 8 bar
Température maxi : –15°C / 60°C
Color: orange
Diameter: DN25 to 150 mm
Working pressure:from 3 to 8 bar
Temperature: –15°C / 60°C
MatériauxMaterials
FX9513 Tuyau refoulement d’eau série lourde aplatissableDischarge PVC hose easily coilable - heavy typeCouleur : bleu ou rouge
Diamètre : DN25 à 200 mm
Pression de service :de 3 à 12 bar
Température maxi : –15°C / 60°C
Color: blue or red
Diameter: DN25 to 200 mm
Working pressure:from 3 to 12 bar
Temperature: –15°C / 60°C
FX9530 Tuyau en polyuréthane spiralé acier pour transportPolyurethane hose metal wire - abrasive materials dischargeCouleur : opaque
Diamètre : DN50 à 300 mm
Pression de service :sans
Température maxi : –40°C / 90°C
Color: opaque
Diameter: DN50 to 300 mm
Working pressure:without
Temperature: –40°C / 90°C
ø intérieurI.D.
253035404551556370768090102110125150200
121010101010108888888643
50-10050-10150-10250-10350-10450-10550-10650-10750-10850-10950-11050-11150-11250-11350-11450-11550-116
0.220.280.300.320.440.480.510.580.680.750.800.901.051.151.351.602.40
mm mm bar m kg/m
ø extérieurO.D.
Dépression*Vacuum
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
5060708090102120125130140152160180200250300
5161718191103121126131141153161181201251301
0.20.20.150.150.150.150.150.150.150.080.080.080.080.080.50.5
30303030303030303030303020202010
0.290.310.350.410.520.570.680.700.710.720.770.840.911.041.321.75
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
ø intérieurI.D.
253035404551556370768090102110125150
8887666655444433
50-10050-10150-10250-10350-10450-10550-10650-10750-10850-10950-11050-11150-11250-11350-11450-115
0.160.200.220.270.300.320.370.440.550.580.600.700.750.811.131.35
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
RéférenceReference
CaractéristiquesPhysical property
* Pression de service / Working pressure.
Autres diamètres possibles sur demande / Any other sizes are available on request.
Flexibles industrielsPVC et inox
PVC and stainless steelindustrial hoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page64
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
65
FX9520 Gaine d’aspiration en PVC spiralé acier aspiration transport ventilationDucting PVC hose metal wire static’s applicationsCouleur : gris / bleu
Diamètre : DN25 à 300 mm
Pression de service :sans
Température maxi : –20°C / 60°C
Color: grey / blue
Diameter: DN25 to 300 mm
Working pressure:without
Temperature: –20°C / 60°C
ø intérieurI.D.
253035405160708090102110120125130140152160180203254300
26.231.236.241.252.261.271.281.291.2103.2111.2121.2126.2131.2141.2153.2161.2181.2204.2255.2301.2
303030303030303030303030303030302020202010
0.240.250.280.330.420.470.510.570.620.700.850.961.011.071.131.201.271.351.502.102.40
mm mm bar m kg/m
ø extérieurO.D.
Pression*Pressure
mm
R.D.C.Bend radius L max Poids
Weight
RéférenceReference
CaractéristiquesPhysical property
MatériauxMaterials
* Pression de service / Working pressure.
Autres diamètres possibles sur demande / Any other sizes are available on request.
Flexibles industrielsPVC et inox
PVC and stainless steelindustrial hoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page65
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
66
FX6500 Tuyau onduleux inox / Stainless steel flexible hose
Matériaux :inox onduleux Z6 CNT 18.10 321Z2 CNT 18.10 316 L
Tresse : Z6 CNT 18.10 nombre 1-2-3, selon PS.
Raccordement :mâle/femelle fileté1/2 symétrique inox, rapide à came inoxBride fixe et tournante enacier ou en inox
Possibilité construction flexibles doubles enveloppes
Materials: stainless steelZ6 CNT 18.10 321Z2 CNT 18.10 316 L
Wire braiding:Z6 CNT 18.10number 1-2-3, dependpressure
Fitting:Screwed ends half coupling cash and groovecoupling, carbon steel or stainless steel fixes flanged collar with swivell flange
On request: jacketedassemblies
RéférenceReference
MatériauxMaterials
CaractéristiquesPhysical property
6
8
10
12
15
20
25
32
40
50
65
80
90
100
125
150
200
250
012012012012012012012012012012012012012012012012012012
10.011.412.812.013.414.714.916.317.619.220.622.022.023.324.625.727.328.933.235.337.440.943.045.147.849.952.162.164.266.376.578.680.789.891.994.1114117120126129132151153156178180183232235237287292
-
162525203838224040245050285050307070449090551101107012712790180180110203203130230230175220220200230230250280280290320320400435435490560
-
10010010014014014015015015015015015020020020020020020020020020025025025025025025035035035041041041045045045051051051056056056071071071081581581510151015101512201220
-
1016722010
1362105.51001785.595
1545.070
1254.172
1314.165
1023.446852.440721.033601.026461.02240
0.7520.627.00.6918.433.00.6911.520.70.5511.220.00.317.010.
0.259.6-
15250350152043158.31502678.31432307.51051886.21081976.2981535.1691283.6601081.550901.539691.53360
1.1330.940.51.0427.649.51.0417.331.00.8316.830.00.4611.015.00.3714.4
-
406688804054484022400712223806162028050016.428852416.426040813.61843409.61602884.01322404.01041844.088
1603.0
82.41082.8
73.61322.8
46.082.82.2
44.880.01.2428.040.01.0
38.4-
0.0880.170.250.130.230.330.170.280.390.240.430.600.280.450.620.370.620.870.500.881.36.41.11.60.891.41.91.21.92.71.92.83.72.33.44.52.54.15.15.74.66.44.76.68.55.57.79.97.310.013.09.214.7
-
DN
Dynam.Statiq.kg/mmmmm
Nbre de tresses
Nbbraid
ø ext.O.D.
R.D.C.Bend radius P.S.
maxPoids
WeightP.E. max P.L.N.E.
Température de service °C
Workingtemperature
– 200 à 50100150200250300350400450500550600
1.000.960.920.880.840.800.760.720.660.600.540.44
1.000.940.900.860.820.780.740.70
----
Z 6 CNT 18-10(AISI 321)
Z 2 CND 18-12(AISI 316L)
Coefficients correcteurs Temperature correction factor
Male fixeFixed male
Femelle tournantSwivel female
Embout fileté coniqueFixed barrel male
Embout fileté cylindrique ou à souder
Pipe and weld ends
Raccord à cameCam and groove
couplers
Bride fixe ou tournante
Fixed or swivel flanges
Raccord unionForged threepieces unions
Extrémités standard pour flexibles inox / End terminations fitting types for stainless steel hoses
Raccord alimentaireHygienic fitting
Flexibles industrielsPVC et inox
PVC and stainless steelindustrial hoses
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page66
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
67
Raccords à came, mâles ou femelles - montage coquilleCam couplings with collar for safety clamp
Raccords demi-symétriquesSymetrical half couplings
Raccords expressExpress quick couplings
Raccords DIN, SMS, CLAMP et MACONDIN, SMS, CLAMP and MACON unions
Raccords sphériques, mâles ou femellesMale or female spherical couplings
Raccords rapides haute pressionHigh pressure quick couplings
Embouts cannelés mâles ou femelles Male or female couplings - nipple
Raccords pour flexiblesindustriels
Industrial hoses fittings
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page67
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
68
BridesFlanges
Colliers de serrage à vis tangente ou à tourillon - Colliers à coquilleHose clamps, single or dual superclamps - Safety clamps
Jupes à sertir inox ou acier cadmié - Bagues d’arrêt de tresseStainless steel or galvanized steel ferrule - Hose end rings
Raccords spéciaux pour flexibles en inoxStainless steel special fittings for hoses
Raccords pour flexiblesindustriels
Industrial hoses fittings
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page68
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
69
R
Il faut supporter correctement lepoids du flexible et du fluide.
The hoses and fluid weight, mustbe properly carried.
Le sens des dilatations et del’axe du flexible doivent sesituer dans un même plan pouréviter les torsions.
The dilatations and hose axeway must be in a same groundto avoid the torsions.
Monter le flexible en forme de Upour éviter les courbures excessivesen cas d’importantes dilatationsaxiales.
In case of major axial dilations, thehose must be assembled in a Ushape to avoid excessive curvature.
Pour éviter un risque de compres-sion, il faut monter le flexible per-pendiculairement aux vibrations.
The hoses must be assembled per-pendicularly to the vibration wayto avoid a compression of thehose.
Si les vibrations sont bidirection-nelles, le flexible doit être montéen coude à 90°.
During duplex vibration, the hosemust be assembled in a 90° elbow.
DN ≥ 100 : dans le cas de vibrationsbidirectionnelles, il faut installerdeux flexibles reliés par un couderigide.
During duplex vibration with bigdiameters (from DN 100), is suits toassemble 2 hoses linked by a rigidelbow.
Calculer la longueur exacte de latuyauterie pour éviter les courburesexcessives (en dessous du rayon decourbure statique) qui réduiraientla durée de vie du flexible.
Calculate the exact piping lengthnot to be under the static curvatureradius, which would decrease thehose life expectancy. Calculate thepiping length to avoid excessivebend.
La tuyauterie de doit pas êtresoumise à des efforts de com-pression.
The piping must not be subjectto compression efforts.
Le montage en coude à 90° estpréconisé pour les mouve-ments latéraux importants.
In case of important lateralmovements, the assembling in90° elbow is recommended.
Le sens du mouvement de l’axeet du tuyau doivent se situerdans un même plan pour éviterles torsions.
The axe movement and hoseway must be in the sameground to avoid the torsions.
Pour une bonne étanchéité, réaliser un serrage équilibrédes brides.
Make a regular torque on bolt on the flanges to get a goodtightness.
Utiliser un berceau lors demanutentions aériennes : sonrayon doit être supérieur aurayon de courbure statique.
During the air handling, use acradle which radius is superiorto the static curvature.
Installation et entretien des flexiblesHoses installation and maintenance
OUI YES NON NO OUI YES NON NO OUI YES NON NO
Flexibles industrielset compensateurs
Industrial hoses andexpansion joints
En déroulant une tuyauterie, il faut éviter toute torsion ettoute courbure inférieure aurayon de courbure statique.
A roll up piping must be unrol-led by avoiding any torsionsand curvature inferior to thestatic curvature radius.
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page69
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
70
Réf. / Ref. Désignation / Designation Page
Compensateurs caoutchouc ou PTFE / Rubber or PTFE expansion joints
Compensateurs métalliques / Metallic expansion joints
72
72
72
73
73
74
74
75
Compensateur à brides tournantes PN10 / Rubber expansion joint with swivel flanges PN10
Compensateur à brides tournantes PN10 avec limiteur de déplacement / Rubber expansion joint with swivel flanges PN10 and retaining ring
Compensateur taraudé gaz / Expansion joint - female threaded - BSP
Compensateur à brides PN10 / Expansion joint flanged PN10
Compensateur à brides PN10 avec limiteur de déplacement / Rubber expansion joint with retaining ring
Compensateur à brides tournantes PN25 / Rubber expansion joint with swivel flanges PN25
Compensateur à brides tournantes PN10 Dilatoflex® / Rubber expansion joint with swivel flanges PN10 Dilatoflex®
Compensateur PTFE à brides tournantes PN10 / PTFE expansion joint with swivel flanges PN10
DI 7240
DI 7241
DI 7140
DI 7245
DI 7246
DI 7251
DI 7249
DI 7247
Réf. / Ref. Désignation / Designation Page
75
75
Compensateur inox à mouvement axial à bride PN10 / Stainless steel expansion joint flanged PN10
Compensateur inox à mouvement axial à souder PN10 / Stainless steel expansion joint welding PN10
DI 7250
DI 7350
Gamme / Range
Compensateurs Expansion joints
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page70
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
71
......................................................................................................................................................................................................................................................................................................................................................................................................................
......................................................................................................................................................................................................................................................................................................................................................................................................................
......................................................................................................................................................................................................................................................................................................................................................................................................................
......................................................................................................................................................................................................................................................................................................................................................................................................................
......................................................................................................................................................................................................................................................................................................................................................................................................................
Coordonnées client / Adress details
Désignation / Designation
DN / DN
Référence / Reference
Type / Type
Nombre ondes / Wave number
Longueur / Length
Quantité / Quantity
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
Commentaires / Comments
Tube intérieur / Lining
Épaisseur / Thickness
Revêtement extérieur / Cover
Tresse / Layer
Contre bride / Retaining ring
Type / Type
Matière / Material
PN / PN
Autres / Others
Tirant limiteur / Control road Oui / Yes Non / No
Matière / Material
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
........................................................................................................................................................................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
Construction / Construction
Raccordement / Ends terminations
Compression / Axial compression
Extension / Axial extension
Latéral / Lateral
Angulaire / Angular
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
........................................................................................................................................................................................................
..................................................
..................................................
Déplacement en mm / Movments in mm
Matière / Material
Boulons TH (Nbre x DN x Longueur) / HH bolt (Number x DN x Length)
Ecrous HU (Nbre x DN) / Nuts (Number x DN)
Rondelles L (Nombre x DN) / Washer (Number x DN)
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
..................................................
........................................................................................................................................................................................................
..................................................
..................................................
Boulonnerie / Bolt
Fiche de renseignements techniques / Technical data sheet
Conditions de service / Working specifications
Pression de service / Working pressure
Fluide / Fluid
Dépression / Vacuum Oui / Yes Non / No
Anneau de renfort / Body ring Oui / Yes Non / No
Température / Temperature
Matière / Material
COMPENSATEURS / EXPANSION JOINTSPoste 1 / Item 1 Poste 2 / Item 2 Poste 3 / Item 3 Poste 4 / Item 4
Compensateurs Expansion joints
Client / Customer : .................................................................................
Coordonnées / Address : ................................................................................................................................................................................................................................................
Tél. / Phone : .............................................................. Fax : ..................................................................... E-mail : .........................................................................................................
Interlocuteur / Sender :........................................................................ Fonction / Function : .......................................................................................
Pays / Country : ......................................................
Date : .................... /.................... /.....................
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page71
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
72
MatériauxMaterials
DNPoids
Weight
mmL
mm mm mm kgLe Lc Li
Conditions de servicePressure
Temperature
Mouvements / Movements
DI7240 Compensateur caoutchouc à brides tournantes PN10Rubber expansion joint with swivel flanges - PN10Revêtement intérieur : EPDM
Revêtement extérieur : EPDM
Carcasse : textile
Soufflet : caoutchouc résistant aux températuresélévées
Raccordement : brides tournantes acier galvaniséPN10
Mouvement angulaire : 15°
Variante : à brides PN16
Tube: EPDM
Cover: EPDM
Braid: textile
Bellow: rubber for high temperature
Ends: swirel galvanised carbon steel flanges - PN10
Angulaire movement: 15°
Variant: flanges PN16
9595105115130135170180205240260265265265265265
DN :32-300
P : 16 barT : –10/80°CP : 10 bar
T : –10/110°C
DN :350-600
P : 10 barT : –10/80°C
667781012121616161616161616
9101013151919202525252525252525
991011121322131314222222222222
DI7241 Compensateur caoutchouc à brides tournantes PN10 avec limiteur de déplacementRubber expansion joint with swivel flanges - PN10 and retaining ringRevêtement intérieur : EPDM
Revêtement extérieur : EPDM
Carcasse : textile
Soufflet : caoutchouc résistant aux températuresélévées
Raccordement : brides tournantes acier galvaniséPN10. Equipements limiteurs de déplacementacier galvanisé ou inox
Mouvement angulaire : 15°
Variante : à brides PN16
Tube: EPDM
Cover: EPDM
Braid: textile
Bellow: rubber for high temperature
Ends: swirel galvanised carbon steel flanges - PN10
Angular movement: 15°
Variant: flanges PN16
9595105115130135170180205240260265265265265265
DN :32-300
P : 16 barT : –10/80°CP : 10 bar
T : –10/110°C
DN :350-600
P : 10 barT : –10/80°C
667781012121616161616161616
9101013151919202525252525252525
991011121322131314222222222222
3240506580100125150200250300350400450500600
3.023.604.275.266.567.309.9313.5118.4523.0229.4339.1048.8055.6764.1273.07
3240506580100125150200250300350400450500600
L = longueur de fabrication / Manufactured length (mm)Le = extension maximum / Axial elongation (mm)Lc = compression maximum / Axial compression (mm)Li = déplacement latéral maximum / Lateral shearing (mm)
DI7140 Compensateur caoutchouc taraudé gaz Rubber expansion joint - female threaded - BSPRevêtement intérieur : EPDM
Revêtement extérieur : EPDM
Carcasse : textile
Soufflet : caoutchouc résistant aux températuresélevées
Raccordement : raccords unions femelle taraudé gaz
Mouvement angulaire : 32° (DN 1/2"-3/4")25° (DN 1"-1"1/4)20° (DN 1"1/2)15° (DN 2")
Tube: EPDM
Cover: EPDM
Braid: textile
Bellow: rubber for high temperature
Ends: cast iron female threaded - BSP
Angular movement:32° (DN 1/2"-3/4")25° (DN 1"-1"1/4)20° (DN 1"1/2)15° (DN 2")
203203203203203203
P : 10 barT : -10/110°C
222222222222
666666
222222222222
0.430.651.121.451.902.52
1/2"3/4"1"
1"1/41"1/2
2"
Compensateurs Expansion joints
RéférenceReference
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page72
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
73
MatériauxMaterials
DN
PT mmL
Mouvements / Movements
mm mm mmLe Lc Li
Conditions de serviceTemperature -pressure
L = longueur de fabrication / Manufactured length (mm)Le = extension maximum / Axial elongation (mm)Lc = compression maximum / Axial compression (mm)Li = déplacement latéral maximum / Lateral shearing (mm)
DI7246 Compensateur caoutchouc à brides PN10 avec limiteurs de déplacementRubber expansion joint flanged PN10 with retaining ring
Cover: CR (type Neoprene®) -EPDM - IIR (type Butyl®) - CSM (type Hypalon®)
Tube: natural rubberEPDM - nitril - IIR (type Butyl®)CSM (type Hypalon®)
Reinforcement: textile
Ends: flanged galvanised carbon steel - PN10
Angular movement: in accordance with DN
Options: Body ring for vacuum uses.Stainless steel flangedControl rod, control units
Standard: PN6 -10 - 16 -ASA 150Face to face : 150 - 200 -250 - 300 - 350mm
Product in conformity to the directive 97/23/EC
13131313131312101098887766666666
5.55.55.55.55.55.55.5
T : suivant
matériauxIn materialsaccordance
181818181818182020202020202525252525252525252530303030303030
404040404040404545404040405050505050505050505060606060606060
181818181822222525202020202323232323232323232323282828282828
50658010012515020025030035040045050055060065070075080085090095010001050110011501200125013001350
Type 20WLD
Revêtement extérieur : CR (type Néoprène®) - EPDM -IIR (type Butyl®) - CSM (typeHypalon®)
Revêtement intérieur : caoutchouc naturel - EPDM - nitrile - IIR (typeButyl®) - CSM (type Hypalon®)
Carcasse : textile
Raccordement : bride tournante acier galvaniséPN10
Mouvement angulaire : suivant DN
Options : Cerceaux pour utilisationen dépression. Brides inox.Equipement tirants limi-teurs de mouvements.
Normes PN6 - 16 - ASA 150Encombrement face à face : 150 - 200 -250 - 300 - 350mm
Produit conforme à la directive 97/23/CE
Compensateurs Expansion joints
Suiv
ant l
a de
man
de d
u cl
ient
/ Fo
llow
ing
the
requ
est
DI7245 Compensateur caoutchouc à brides PN10 / Rubber expansion joint flanged-PN10Revêtement extérieur : CR (type Néoprène®) - EPDM -IIR (type Butyl®) - CSM (typeHypalon®)
Revêtement intérieur : caoutchouc naturel - EPDM - nitrile - IIR (typeButyl®) - CSM (type Hypalon®)
Carcasse : textile
Raccordement : bride tournante acier galvaniséPN10
Mouvement angulaire : suivant DN
Options : Cerceaux pour utilisationen dépression. Brides inox.Equipement tirants limi-teurs de mouvements.
Normes PN 6 - 16 - ASA 150
Encombrement : sur demande 150 - 200 -250 - 300 - 350 mm
Cover: CR (type Neoprene®) -EPDM - IIR (type Butyl®) - CSM (type Hypalon®)
Tube: natural rubberEPDM - nitril - IIR (type Butyl®)CSM (type Hypalon®)
Reinforcement: textile
Ends: flanged galvanised carbon steel - PN10
Angular movement: in accordance with DN
Options: Body ring for vacuum uses.Stainless steel flangedControl rod, control units
Standard: PN 6 -10 - 16 -ASA 150Face to face:on request 150 - 200 -250 -300 - 350 mm
13131313131312101098887766666666
5.55.55.55.55.55.55.5
T : suivant
matériauxIn materialsaccordance
181818181818182020202020202525252525252525252530303030303030
404040404040404545404040405050505050505050505060606060606060
181818181822222525202020202323232323232323232323282828282828
50658010012515020025030035040045050055060065070075080085090095010001050110011501200125013001350
Type 20W
Suiv
ant l
a de
man
de d
u cl
ient
/ Fo
llow
ing
the
requ
est
RéférenceReference
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page73
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
74
DNPoids
Weight
mmL
Mouvements / Movements
mm mm mm kgLe Lc Li
MatériauxMaterials
Conditions de servicePressure
Temperature
DI7249 Compensateur caoutchouc à brides tournantes PN10 - DILATOFLEX®
Rubber expansion joint with swivel flanges - PN10 - DILATOFLEX®
Mouvement angulaire : DN 32 - 40 - 50 - 65 : 20°DN 80 : 17°DN 100 -125 : 14°DN 150 - 200 : 10°DN 250 : 8°DN 300 : 7°
Option : cerceaux inoxpour utilisation en dépression.
Produit conforme à ladirective 97/23/CE catégorie III, module B1D.
Angular movement: DN 32 - 40 - 50 - 65: 20°DN 80: 17°DN 100 -125: 14°DN 150 - 200: 10°DN 250: 8°DN 300: 7°
Option: stainless steel body ring for vacuum uses.
Product in conformity tothe directive 97/23/EC,category III, B1D module.
130130130130130130130130130130130
P : 16 barT :
suivant lesmatériaux /followingmaterials
1010101010101515202525
2525252525252520201515
1515151515151515151515
3.03.44.04.75.06.27.710
12.216.720.5
3240506580100125150200250300
Applications Applications
Produits abrasifs ou corrosifs (acides et bases faibles) -Eaux industrielles - Eau de mer - Vapeur d’eau à basse température
Eaux usées et industrielles - Air comprimé - Gaz hydrogène - Azote
Gaz - Air comprimé - Carburant - Huiles - Hydrocarbures de teneuren aromatiques < 40 % - Eau assainissement
Acides et bases - Produits chlorés dilués
Acides et bases fortes - Produits chimiques agressifs
Eau sanitaire (ECFS) - Produits alimentaires - Eau chaude, froidesanitaire
Eau de chauffage et de climatisation
Produits spéciaux très agressifs
Eau surchauffée - Vapeur d’eau
Abrasive or corrosive products (Weak acids ans bases) - Industrialwater - Sea water - Low temperature water vapour
Non aromatic petroleum products
Gas - Compressed air - Oil - Fuel - Petroleum products with aromatic content < 40%
Acids and bases - Weak chlorinated products
Strong acids and bases - Aggressive chemicals
Domestic water - Food products
Central heating and air - Conditioning water
Special highly aggressive products
Superheated water - Water vapour
Température maxiMax. temperature
90° C
90° C
90° C
100° C
100° C
95° C
90/110° C
110° C
140° C
AR/CN
H H
G Z
A B T E
Y P
E P C
C C
F 1
E S
Tubes
DI7251 Compensateur caoutchouc à brides tournantes PN25 Rubber expansion joint with swivel flanges - PN25Revêtement intérieur : EPDM - nitrile
Revêtement extérieur : EPDM
Carcasse : textile
Soufflet : caoutchouc résistant aux températuresélevées
Raccordement : bride tournante acier galvaniséPN10
Mouvement angulaire : suivant DN
Tube: EPDM - nitril
Cover: EPDM
Braid: textile
Bellow: rubber for high temperature
Ends: flanged PN10
Angular movement: in accordance with DN
100100125125125125150150150150175175200
P : 25 barT : 60°C
P : 16 barT : 90°C
P : 10 barT : 100°C
10101010101010101010151515
20203535353535353535454545
10101515151515151515151515
2.42.44.34.34.54.85.78.811.312.020.526.235.0
20253240506580100125150200250300
RéférenceReference
L = longueur de fabrication / Manufactured length (mm)Le = extension maximum / Axial elongation (mm)Lc = compression maximum / Axial compression (mm)Li = déplacement latéral maximum / Lateral shearing (mm)
Dilatoflex® est une marque déposée par Woco Michelin AVSDilatoflex® is registered trademark by Woco Michelin AVS.
Compensateurs Expansion joints
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page74
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
75
MatériauxMaterials
Conditions de servicePressure
Temperature
DI7247 Compensateur PTFE à brides tournantes PN10PTFE expansion joint with swivel flanges - PN10Revêtement intérieur : PTFE à 3 ondes
Anneaux de renfort : inox
Raccordement : brides tournantes acier galvanisé PN10 sur colletPTFE
Mouvement angulaire : 10°
Tube: PTFE 3 waves
Body ring: stainless steel
Ends: flanged PN10 PTFEsealing on flange
Angular movement: 10°
5050557080100100100100150150150160160160160170170170170170170
P : 10 barT : -10/200°C
10101015202525252530303035353535353535353535
10101015202525252530303035353535353535353535
55588812121214141414181818202020202020
2.12.83.34.85.76.38.210.014.019.027.041.049.060.065.074.0108.0136.0146.0184.0214.0275.0
25324050658010012515020025030035040045050060070080090010001200
Soufflet : inox
Fourreau interne : inox
Raccordement :- à brides PN10 : DI 7250- à souder : DI 7350
L1 : mouvement axial
Bellow: inox
Internal sleeve: stainless steel
Ends: - flanged PN10: DI 7250- socket ends: DI 7350
L1: axial movement
P : 25 barDN15/65
P : 16 barDN80/100
P : 10 barDN125/200
DN > 200Nous consulter
Contact us
T max. : 400°C
Compensateurs inox à mouvement axial Stainless steel expansion joints
DI 7250DI 7350
A bridesFlanged type
DI 7250
A souderSocket ends
DI 7350
RéférenceReference
DNPoids
Weight
mmL
Mouvements / Movements
mm mm mm kgLe Lc Li
L = longueur de fabrication / Manufactured length (mm)Le = extension maximum / Axial elongation (mm)Lc = compression maximum / Axial compression (mm)Li = déplacement latéral maximum / Lateral shearing (mm)
1.81.92.42.62.83.04.05.05.05.06.07.08.08.010.011.011.013.015.017.020.022.028.030.038.043.048.054.065.075.090.095.0150.0160.0215.0225.0
180280170260180270180280190280210300200290210300200280210290220310240300230330250360160270200250210260220270
255025502550255025502550255025502550255025502550255025502550255025502550
15152020252532324040505065658080100100125125150150200200250250300300350350400400500500600600
200350210340200330220350220340250380260380280370260360260360270380280380250390260400260410290380290380290380
0.30.50.40.60.50.80.71.10.81.31.42.12.12.93.04.04.06.06.08.08.011.012.017.015.023.019.028.021.032.030.039.038.049.046.060.0
mm kg mm mm mm
L
DI 7250 DI 7350Poids
Weight L PoidsWeight
L1 DN
Compensateurs Expansion joints
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page75
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
76
Instructions généralesL’installation et l’entretien des compensateurs doivent se faire selonles règles de l’art afin de garantir leur bon fonctionnement.La durée de vie du manchon est directement liée à une bonnemanutention, une bonne installation ainsi qu’à une bonne maintenance.Les mouvements appliqués au manchon compensateur ne doiventen aucun cas être supérieurs aux valeurs de ceux acceptés par le compensateur (voir documentation).Le manchon compensateur ne doit pas servir à corriger les défauts d’alignement de la tuyauterie.En cas d’utilisation non-conforme ou de défaut de maintenance, lesmanchons, les équipements, les accessoires ainsi que la tuyauteriepeuvent subir des dommages importants.
Contrôle avant montageAvant l’installation, vérifier le bon dimensionnement des compen-sateurs, les conditions de services : la température de fonction-nement, la pression de service, les limites de mouvement et la compatibilité des matériaux de construction avec le fluide véhiculé ou le milieu ambiant.
MontageAvant d’installer le compensateur, vérifiez que les trous de fixationdes brides soient en alignement avec les trous des équipements oudes brides de la tuyauterie. Le défaut d’alignement des axes dumanchon et des axes de la tuyauterie ne doit pas excéder 3mm.La torsion du manchon ne sera en aucun cas autorisée.Au montage nous préconisons de monter la tête des boulons côté onde du compensateur afin d’éviter de blesser l’enveloppeextérieure du compensateur lors du déplacement du manchon(risque de fuite). Prendre soins de bien dimensionner les diamètreset la longueur de la boulonnerie. Serrez uniformément les boulonsen ordre diagonal de manière progressive.Les boulons sont considérés serrés lorsque le bord de la bride commune s’enfle légèrement (approximativement 10% de l’épais-seur en caoutchouc de bride). Le montage de joints supplémentairesentre la bride et le manchon n’est pas nécessaire, le talon caout-chouc fait office de joint d’étanchéité. Lors du montage des tirantslimiteurs prévoir la mise en place de rondelles pour leurs fixations.
Exemple d’installationDans un réseau d’eau glacée avec une pompe monté sur des fondations en béton. Les manchons compensateurs absorbent les vibrations, les mouvements et les perturbations générés par la pompe.
Tirants limiteursLes tirants limiteurs sont conçus pour réduire les dommages possibles en cas de mouvements excessifs de la tuyauterie. Les princi-pales causes sont les différences de températures, les montées enpression, les défauts d’alignement de la tuyauterie, la mauvaiseposition des points fixes ou des guides de tuyauterie. Monter toujours les tirants limiteurs dans les conditions sévères d’utilisationsou lors de problèmes de positionnement des points fixes. Ils encaissent les efforts de réaction.Nous consulter pour la fourniture de limiteurs de déplacement enaxial, radial ou angulaire.
General precautionsThe installation and the maintenance of the expansion joints mustbe done according to the approved methods in order to guaranteetheir correct working.The sleeve lifespan is directly related to a good recommendation, a good installation and to a good maintenance.The movements applied to the expansion joint should not exceedthe values of the movements accepted by the rubber expansionjoint defined in documentation.The expansion joint should not be used to rectify the piping alignment defects.In the event of abnormal uses of the compensation sleeves (badrecommendation, badly definite operating condition, installationnot-in conformity or defect of maintenance), the sleeves, the equipment, the accessories as well as piping can suffer importantdamage.
Pre-installation checkBefore the installation, check the good dimensioning of the expansion joints, the operating conditions such as the operating temperature, the operating pressure, the limits of movement andthe compatibility of building materials with the fluid or the ambientconditions.
MountingBefore assembling expansion joint, check that the fixings holes ofthe supports are in alignment with the holes of the pipe equipmentor flanges.The axes misalignment of the expansion joint and the axes of pipingshould not exceed 3 mm.The sleeve torsion will not be authorized.For the setting we recommend to assemble the head of bolts on thesame side as the wave in order to avoid spoiling the envelope outsi-de of the expansion joint at the time of the displacement of thewave (risk of leakage).Take care to dimension the nuts diameters and bolts length.Screw equally bolts in diagonal sequence.The bolts are considered screw when the edge support swells slightly (10% of the rubber flange thickness). Sealing gaskets are not required when the matting flange sealingsurface is completely clean and smooth, because the full faced rubber flange itself seals perfectly.When the control units are set up, steel washer must be used.
Typical installationIn a cooling water system with a pump mounted on a concretefoundation, Expansion joints convey cold water, absorb the movements and eliminate stress caused by pump.
Control unitsControl units are designed to minimize possible damage on theexpansion joint caused by an excessive motion, an abnormal temperature fluctuation, pressure surges, guiding of piping or failure of anchoring. Where these situations may occur, control unitsmust be used to limit the amount and direction of movement.Consult us for axial, radial angular control units supply.
Installation et entretien des compensateursExpansion joints installation and maintenance
Compensateurs Expansion joints
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page76
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
77
Effort de réactionEn fonctionnement, le compensateur crée un effort de réactiondont la valeur est en relation avec les conditions de services, la forme de l’onde du compensateur et le positionnement despoints fixes.Les points fixes de la tuyauterie doivent être calculés pour résister à l’effort de réaction et permettre les mouvements de la tuyauterie liés aux conditions de services (différences de pression et différencesde températures).Les points fixes seront à installer en début et fin de ligne, en entréede courbe et aux endroits qui encaissent les efforts de réaction descompensateurs et des pressions internes.Le sous-dimensionnement des points fixes peut entraîner l’arrache-ment du manchon de ses brides de fixations et provoquer de graves dommages sur l’installation. Il est impératif de bien calculerla résistance des points fixes.Les déplacements du compensateur doivent rester dans ses limites techniques
Support et guidage de la tuyauterieEn aucun cas le compensateur ne doit servir à supporter le poids dela tuyauterie et assurer son alignement. Il faut donc veiller à instal-ler des points d’ancrage et des guides de tuyauterie pour garantir le fonctionnement du compensateur dans ces conditions normales.Les points fixes et les guides doivent être positionnés à bon escient et à intervalles réguliers afin de limiter les mouvements de tuyauterie.Les compensateurs doivent être montés entre les points fixes et ne servir qu’à encaisser les mouvements de tuyauterie dans la limite deleurs caractéristiques techniques.Les points fixes seront suffisamment dimensionnés pour accepter les efforts de réaction des compensateurs ainsi que les efforts dûs au fonctionnement de l’installation.
MaintenanceIl est très important de vérifier régulièrement les points suivantspour assurer une longévité d’exploitation des compensateurs.
StockageLes compensateurs doivent être stockés dans un endroit sec, frais etaéré à l’abri de la lumière, en exposition axe vertical, loin d’une source de radiation, sans exposition à l’ozone, sans contactavec des hydrocarbures (pétrole, huile), des produits chimiques, protégés des UV, etc.Ne pas stocker de produits lourds sur les compensateurs.
ManutentionParticulièrement pour les compensateurs de grande dimensionveiller à manutentionner le manchon avec des sangles en évitantd’utiliser des fourches de chariot élévateur susceptible de détériorerle revêtement extérieur ou le revêtement intérieur du manchon(risque de fuite).
AssemblageBien vérifier le dimensionnement de la boulonnerie pour ne pas abîmer l’onde du manchon.Vérifier le serrage de la boulonnerie et le revérifier après la première mise en service.
Pressure thrustWhen installed, the joint exerts some forces in the pipeline. Forcesintensity depends of pressure and temperature ratting, and mainanchors.These main anchors must be calculated thanks to pressure and temperature ratting.Main anchors must be set at the beginning and the end of the pipeline.If the main anchors are under dimensioned, the installation can suffer serious damage.
Anchoring and guidingThe expansion joints and flexible connectors are not designed tocarry the weight and movement of piping system. It is recom-mended to install pipe guides for proper alignment and anchor.Expansion joint should absorb pipeline expansion and contractionbetween fixed anchor points. Pipe guides should be placed at regu-lar intervals all along the line to prevent undue line displacement.Anchors in the pipeline must be solid anchor to withstand the pressure thrust developed in the line together with any other forces imposed on the System. The pipe should be well anchored tolimit the pipe movements that the expansion joint must absorb.Expansion joint mustn’t be subject to operating condition beyondthe pressure and temperature ratings recommended.
MaintenanceIt is very important to check the following points on a regular basisto insure long service life of joint.
StorageThe joints should be stored in a dry, cool and ventilated dark placein a flat position far from any radiation, ozone, oil, chemical, sunlight, etc.Store flange face down on a pallet. Do not put other heavy things on.
HandlingPlease handle the joint with straps but not with bars.
BoltingCheck bolt tightness periodically after going on stream (one time aweek). The bolts may loosen and result in a failure in the seal.
Compensateurs Expansion joints
Installation et entretien des compensateursExpansion joints installation and maintenance
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page77
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
78
Compensateur axialAxial expansion joint
Déplacements autorisésAcceptable movement
Montages non conformesBad assembling
Montages conformesGood assembling
Montage / Assembling
Exemples de montage des tirants limiteursControl units mounting samples
Compensateur latéralLatéral expansion joint
Compensateur angulaireAngular expansion joint
OUI
YES
SoudureEn cas d’opération de soudure sur la tuyauterie ou aux abords du manchon il est recommandé de démonter le compensateur ou de le protéger des projections de soudures ou des coups d’arcélectriques, etc…
IsolationS’assurer que lors de l’isolation de compensateur une fuite n’ait pasété créée.
WeldingIn the event of operation of piping welding it is recommended todismount the expansion joint.In case of necessary welding operation, the joint should be protected from weld splatter and arc strikes, etc.
InsulationBefore welding take off the expansion joint and protect them fromheating and welding projection and arc.Make sure not to insulate over or around joint. Insulation may makeleak detection difficult and restrict joint movements.
OUIYES
OUIYES
NONNO
NONNO
NONNO
NONNO
OUIYES
NONNO
NONNO
NONNO
NONNO
OUIYES
AX
AX
LA
AG
LA
AG
NON
NO
Compensateurs Expansion joints
Installation et entretien des compensateursExpansion joints installation and maintenance
TECOFI-VOL2_FR-p45-78_VOLUME_02_045_078.qxd 27/06/13 14:38 Page78
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:44 Page79
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
80
Mesure - ContrôleNiveau
Measure - Control Gauge
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
inch
øraccord
connection
MA 5100 Manomètre acier / ABS raccord vertical Vertical connection steel / ABS pressure gaugeBoîtier : acier / ABS
Raccordement : laiton mâle gaz
Mécanisme : alliage cuivreux
Graduations :toutes graduations comprises entre –1 bar et + 400 bar
Casing: steel / ABS
End: brass male BSP
Mechanism: brass
Scales: any graduations includedbetween – 1 bar and + 400 bar
T : –10 / +80°C
1/4"1/2"1/2"
0.250
0.970
6380100
MA 5101 Manomètre acier / ABS raccord arrièreBack connection steel / ABS pressure gaugeBoîtier : acier / ABS
Raccordement : laiton mâle gaz
Mécanisme : alliage cuivreux
Graduations : toutes graduations comprises entre –1 bar et + 400 bar
Casing: steel / ABS
End: brass male BSP
Mechanism: brass
Scales:any graduations includedbetween – 1 bar and + 400 bar
T : –10 / +80°C
1/4"1/2"1/2"
0.250
0.970
6380100
MA 5102 Manomètre à bain de glycérine - raccord verticalVertical connection pressure gauge glycerin filled Boîtier : inox
Raccordement : laiton mâle gaz
Mécanisme : alliage cuivreux
Graduations : toutes graduations comprises entre –1 bar et + 400 bar
Casing: stainless steel
End: brass male BSP
Mechanism: brass
Scales:any graduations includedbetween – 1 bar and + 400 bar
T : –10 / +80°C
1/4"1/2"
0.2500.970
63100
MA 5103 Manomètre à bain de glycérine - raccord arrièreBack connection pressure gauge glycerin filled Boîtier : inox
Raccordement : laiton mâle gaz
Mécanisme : alliage cuivreux
Graduations : toutes graduations comprises entre –1 bar et + 400 bar
Casing: stainless steel
End: brass male BSP
Mechanism: brass
Scales:any graduations includedbetween – 1 bar and + 400 bar
T : –10 / +80°C
1/4"1/2"
0.2500.970
63100
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:44 Page80
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
81
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
inch
øraccord
connection
MA 6102 Manomètre à contacts électriques / Pressure gauge with electrical switchesBoîtier : inox
Raccordement : 1/2" gaz mâle
Mécanisme : inox
Graduation : 0/0.6b ; 0/1b ;0/1.6b ; 0/10b ; 0/60b, etcAutres graduations : nousconsulter
Casing: stainless steel
End: male 1/2“ BSP
Mechanism: stainless steel
Scale: 0/0.6b ; 0/1b ; 0/1.6b ; 0/10b ; 0/60b, etcFor others graduationsplease contact us
T : 0°C / +80°C
1/2" 0.970 160
MA 6103 Manomètre différentiel / Differential pressure gaugeBoîtier : inox
Raccordement :1/2" gaz mâle
Mécanisme : inox
Graduation :de 0 à 100 bar
Casing: stainless steel
End: male 1/2" BSP
Mechanism: stainless steel
Scale: from 0 to 100 bar
T : 0°C / +80°C
Pression statiqueStatic pressure
0 / 10 barPression
différentielleDifferential
pressure0,16 / 16 bar
1/2" 5.5 160
MA 5104 Thermomètre à capillaire / Capillary thermometerBoîtier : inox
Raccordement : 1/2" et 3/4" gaz mâle
Mécanisme : inox
Graduation :–200/+100°C…100/500°C
Longueur immersion : jusqu'à 1.000 mm
Casing: stainless steel
End: male 1/2" and 3/4" BSP
Mechanism: stainless steel
Scale: –200/+100°C…100/500°C
Capillary length : up to 1.000 mm
112166
T : –25°C / +65°C
100150
MA 6105 Manomètre à séparateur / Manometer with separatorBoîtier : inox
Raccordement : voir brides inférieures
Mécanisme : laiton ou inox
Bride supérieure (acier ou inox), membrane (inox ouPTFE), bride inférieure(acier, inox, PVC / filetée,taraudée, à souder)
Autre type sur demande
Casing: stainless steel
End: see lower flange
Mechanism: brass or stainless steel
Upper flange (steel or stainless steel), diaphgram(stainless steel or PTFE),lower flange (steel, stain-less steel, PVC / male orfemale threaded, to weld)
Other type on request
T : –25°C / +65°C
6380100
MA 6100 Manomètre tout inox raccord verticalVertical connection all stainless steel pressure gaugeBoîtier : inox
Raccordement : mâle inox BSP
Mécanisme : inox
Graduations :0/0.6b ; 0/1b ; 0/1.6b ;0/10b ; 0/60b, etcAutres graduations : nousconsulter
Casing: stainless steel
End: stainlees steel male BSP
Mechanism: stainlees steel
Scale:0/0.6b ; 0/1b ; 0/1.6b ;0/10b ; 0/60b, etcFor others graduationsplease contact us
T : –25°C / +65°C
1/4"1/2"1/2"
0.130.531.02
63100150
Mesure - ContrôleNiveau
Measure - Control Gauge
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:44 Page81
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
82
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
inch
øraccord
connection
MA 6101 Manomètre à capsule cadran sec vertical / Vertical connection cap pressure gaugeBoîtier : inox
Raccordement : mâle gaz
Capsule : laiton
Graduation :de 0 à 600 mbar
Casing: stainlees steel
End: male BSP
Cap: brass
Scale: from 0 to 600 mbar
108152
T : 0°C / +80°C
1/2"1/2"
0.601.00
100150
TB 1101 Thermomètre industriel à boîtier - modèle droitIndustrial thermometer - straight typeBoîtier : alu anodisé
Raccordement :fileté mâle 1/2" gaz
Plonge : laiton, longueur 63, 100 mm et plus
Autre construction :plonge inox
Graduation : –30/+50 ; –10/+50 ; 0/60 ; 0/100 ;0/120 ; 0/160°C
Casing: anodised alu
End: male threaded 1/2" BSP
Bulb: brass, length 63 , 100 mm and more
Other construction:stainless steel bulb
Scale: –30/+50 ; –10/+50 ; 0/60 ; 0/100 ; 0/120 ;0/160°C
110150200
PN16 1/2"1/2"1/2"
PMMMGM
TB 1102 Thermomètre industriel à boîtier - modèle équerreIndustrial thermometer - angle typeBoîtier : alu anodisé
Raccordement :fileté mâle 1/2" gaz
Plonge : laiton, PL 63, PL 100 et plus
Autre construction :plonge inox
Graduation : –30/+50 ; –10/+50 ; 0/60 ; 0/100 ;0/120 ; 0/160°C
Casing: anodised alu
End: male threaded 1/2" BSP
Bulb: brass Lg 63 , 100 mm and more
Other construction:stainless steel bulb
Scale: –30/+50 ; –10/+50 ; 0/60 ; 0/100 ; 0/120 ;0/160°C
110150200
PN16 1/2"1/2"1/2"
PMMMGM
TC 7104 Thermomètre industriel à cadran / Dial industrial thermometerBoîtier : acier
Raccordement : gaz ou NPT
Graduation : –200/+40 ; –120/+40 ; –80/+40 ;–60/+40 ; –40/+40 ;–30/+30 ; –30/+50 ; 0/60 ;0/100 ; 0/120 ; 0/160 ;0/200 ; 0/250 ; 0/300 ;0/400°C
Plongeur : cuivre,acier ou inox, mâle 1/2" gaz
Option : collerette avant, arrière ; sortie axiale, radiale
Doigt de gant : laiton
Casing: steel
End: BSP or NPTScale: –200/+40 ; –120/+40 ; –80/+40 ;–60/+40 ; –40/+40 ;–30/+30 ; –30/+50 ; 0/60 ;0/100 ; 0/120 ; 0/160 ;0/200 ; 0/250 ; 0/300 ;0/400°C
Bulb: copper, steel or stainless steel, male 1/2"BSP
On request: front flange, back flange, vertical orback connexion
Bulb: brass
T : –20°C / +400°C
1/2"1/2"1/2"1/2"
80100160250
Mesure - ContrôleNiveau
Measure - Control Gauge
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:44 Page82
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
83
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
H
inch
øraccord
connection
Conditions de servicePressure
Temperature
RéférenceReference
TB 1100 Thermomètre pour chauffage - modèle droitHeating thermometer - straight typeBoîtier : laiton
Raccordement : laiton mâle 1/2"
Graduation : 0 à 130°C
Plonge : laiton longueur 45 ou 60 mm
Casing: brass
End: brass male 1/2"
Pressure scale: 0 to 130°C
Bulb: brass length 45 or 60 mm
PN16 160260
1/2"1/2"
PMGM
TB 1103 Thermomètre pour chauffage - modèle équerreHeating thermometer - angle typeBoîtier : laiton
Raccordement : laiton mâle 1/2"
Graduation : 0 à 130°C
Plonge : laiton longueur 45 ou 60 mm
Casing: brass
End: brass male 1/2"
Pressure scale: 0 to 130°C
Bulb: brass length 45 or 60 mm
PN16 160260
1/2"1/2"
PMGM
TC 7100 Thermomètre de chauffage à cadran / Heating dial thermometerBoîtier : alu
Raccordement : laiton mâle 1/2"
Plonge arrière + doigt de gant laiton : 40, 60 ou 100
Graduation : –30/+50 ; –20/+60 ; 0/80 ; 0/100 :0/120 ; 0/160 ; 0/200 ;0/250°C
Autre construction :plonge inox
Casing: alu
End: brass male 1/2"
Back bulb brass length: 40 , 60 or 100
Scale: –30/+50 ; –20/+60 ; 0/80 ; 0/100 :0/120 ; 0/160 ; 0/200 ;0/250°C
Other construction: stainless steel bulb
1/2"1/2"1/2"
0.1200.1400.170
6380100
TC 7101 Thermomètre de chauffage à cadran - plonge verticale Heating dial thermometer - vertical bulbBoîtier : alu
Raccordement : laiton mâle 1/2"
Plonge verticale + doigt degant laiton : 40, 60 ou 100
Graduation : –30/+50 ; –20/+60 ; 0/80 ; 0/100 :0/120 ; 0/160 ; 0/200 ;0/250°C
Autre construction : plonge inox
Casing: alu
End: brass male 1/2"
Vertical bulb brass length:40 , 60 or 100
Scale: –30/+50 ; –20/+60 ; 0/80 ; 0/100 :0/120 ; 0/160 ; 0/200 ;0/250°C
Other construction:stainless steel bulb
6363
T : 0°C / 250°C
1/2"1/2"
0.1200.170
63100
SC 5690 Siphon cor de chasse mâle/femelle / Siphon male/femaleCorps : acier
Corps : inox sur demande
Raccord : mâle, femelle gaz
Option : raccord NPT
Autre construction possible : inox
Body: steel
Body: stainless steel on request
End: male, female BSP
Option: NPT end
Other possible construction : stainlesssteel
P : 100 barT : 400°C
275 1/2" 0.750 1/2"
Mesure - ContrôleNiveau
Measure - Control Gauge
L
H
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:44 Page83
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
84
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
X 1643 Limiteur de pression / Pressure reducerCorps : laiton
Raccord : mâle, femelle gaz
Autre construction : inox
Pression en bar : 0.4 à 2.5 ; 2 à 6 ; 5 à 25 ; 20 à 60 ; 50 à 250
Body: brass
End: male, female BSP
Other construction: stainless steel
Pressure in bar: 0.4 to 2.5 ; 2 to 6 ; 5 to 25 ; 20 to 60 ; 50 to 250
80P : 250 barT : 120°C
95 0.7 1/2"
RP 1690 Robinet à pointeau pour manomètre / Needle valve for pressure gauge Corps : laiton
Raccord : mâle, femelle gaz
Pointeau : acier
Autre constructions possibles : acier, inox
Body: brass
End: male, female BSP
Needle: steel
Others possible constructions: steel, stainless steel
100P : 250 barT : 120°C
79 0.54 1/2"
RP 1692 Robinet à pointeau pour manomètre à bride porte-étalonNeedle valve for pressure gauge with flangeCorps : laiton
Raccord : mâle, femelle gaz
Pointeau : acier avec brideporte-étalon 40x5
Autre constructions possibles : acier, inox
Body: brass
End: male, female BSP
Needle: steelwith flange 40x5
Others possible constructions: steel, stainless steel
100P : 250 barT : 120°C
90 1/2
RP 1693 Robinet à double pointeau avec bride PE pour manomètreDouble needle valve with flange for pressure gaugeCorps : laiton
Raccordement : mâle/femelle gaz
Pointeau : acier
Autre constructions possibles : acier, inox
Body: brass
End: male/female BSP
Needle: steel
Others possible constructions: steel, stainless steel
125P : 250 barT : 120°C
0.95 1/2"
BC 1100 Robinet à boisseau pour manomètre / Plug valve for pressure gaugeCorps : laiton
Raccordement : - mâle/femelle gaz- femelle/femelle gaz
(en option)
Body: brass
End:- male/female BSP- female/female BSP
(on request)
465056
P : 10 barT : 80°C
757575
1/4"3/8"1/2"
BC 1102 Robinet à boisseau pour manomètre avec bride PEPlug valve with flange for pressure gauge Corps : laiton
Raccordement : mâle/femelle gaz
Bride : laiton 40x5
Body: brass
End: male/female BSP
Flange: brass 40x5
6074
P : 10 barT : 80°C
7575
1/4"1/2"
Mesure - ContrôleNiveau
Measure - Control Gauge
L
H
L2
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:44 Page84
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
85
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
H DébitFlow
Conditions de servicePressure
Temperature
RéférenceReference
380380390400410420420
X 1641 Robinet à boisseau à molette pour manomètreWheel plug valve for pressure gaugeCorps : laiton
Raccordement :mâle/femelle gaz
Body: brass
End: male/female BSP
3845
P : 10 barT : 80°C
3535
3/8"1/2"
CD 3140 Contrôleur de circulation fonte / Cast iron sight flow indicatorCorps : fonte
Raccordement :taraudé gaz
Chapeau : fonte
Modèle glace double trempée avec ailettes fixes
Option : corps bronze
Body: cast iron
End: threaded BSP
Bonnet: cast iron
Hardened double glass inspection window with fixed fans
Option: bronze body
759090120120140
P : 16 barT :
–10°C / +180°C
606673102102116
1/2"3/4"1"
1"1/41"1/2
2"
CD 3241 Contrôleur de circulation à brides / Flanged sight flow indicatorCorps : fonte
Raccordement :à brides PN16
Chapeau : fonte
Modèle glace double trempée avec ailettes fixes
Autres constructions :acier, inox (PN25) ou bronze
Body: cast iron
End: flanged PN16
Bonnet: cast iron
Hardened double glass inspection window with fixed fans
Other constructions:steel, stainless steel (PN25)or bronze
130150160180200230290310350400480
P : 16 barT : 180°C
105106110132140150190210245315340
1520253240506580100125150
DB 5140 Débitmètre à flotteur / Float sight flowCorps : acier
Raccordement : à brides PN16
Flotteur : inox
Sur demande :- construction : inox - flotteur : PTFE- joints : FPM
Body: steel
End: flanged PN16
Float: stainless steel
On request- construction: stainless steel- float: PTFE- tight: FPM
P : 16 barT : 80°C
0.1 à40000
l/ hsuivant DN /
followingDN
2.53.34.8811
15.319.3
15202540506580
DB 9500 Débitmètre à flotteur / Float sight flowCorps : PVC
Raccordement : unions PVC à coller
Flotteur : PVDF
Joints : EPDM
Sur demande : - raccords : fonte d'acier ou inox
- joints : FPM
Body: PVC
End: solvent socket union PVC ends
Float: PVDF
Tight: EPDM
On request:- ends: cast iron or stainless steel
- tight: FPM
400408418432444
P : 10 barT : 50°C
0 à 50m3/h suivant DN /
followingDN
2532405065
Mesure - ContrôleNiveau
Measure - Control Gauge
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:45 Page85
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
86
MatériauxMaterials
DNPoids
Weight
mm
L
mm m3/h kg
H DébitFlow
Conditions de servicePressure
Temperature
RéférenceReference
DB 3160 Contrôleur de débit / Sight flowCorps : fonte
Raccordement : fileté
Autres constructions : bronze, acier, inox
Montage horizontal ou vertical
Body: cast iron
Ends: threaded male
Other constructions: bronze, steel, stainless steel
Horizontal or vertical installation
135160180190
P : 16 barT : 120°C
115120130135
0.02à 30
1.71.82.22.6
3/4"1"
1"1/22"
DB 3260 Contrôleur de débit / Sight flowCorps : fonte
Raccordement : à brides PN16
Autres constructions : bronze, acier, inox
Montage horizontal ou vertical
Body: cast iron
Ends: flanged PN16
Other constructions: bronze, steel, stainless steel
Horizontal or vertical installation
200200200200200
P : 16 barT : 120°C
115120130135135
0.02à 30
34
5.57.29.3
1525405065
DB 3240 Contrôleur de débit / Sight flowCorps : fonte
Raccordement : à brides PN16
Autres constructions : bronze, acier, inox
Montage horizontal ou vertical
Body: cast iron
Ends: flanged PN16
Other constructions: bronze, steel, stainless steel
Horizontal or vertical installation
200200200300300300
P : 16 barT : 120°C
185185195210220250
0.02à
250
11.512.514182335
6580100125150200
P 7100 Pressostat 0,2 à 16 bar / Pressure switches 0.2 to 16 barCorps : aluminium IP 54
Raccordement : fileté gaz
Plages de réglage : P20 - 0,2 à 8 barP30 - 5 à 16 barP40 - 8 à 28 bar
Body: aluminium IP 54
Ends: threaded male BSP
Pressure rating:P20 - 0.2 to 8 barP30 - 5 to 16 bar P40 - 8 to 28 bar
P : 18 barT :
–50°C / +70°C
1/4"
GN 2100 Garniture de niveau / Water gaugesCorps : bronze avec robinets d'arrêt
Garniture : graphite
Raccordement :fileté mâle gaz
Body: bronze with stop valves
Tight: graphite
Ends: threaded male BSP
125125
P : 9 barT : 90°C
3030
0.700.80
1/2"3/4"
Mesure - ContrôleNiveau
Measure - Control Gauge
GN 2101 Garniture de niveau / Water gaugesCorps : bronze sans robinets d'arrêt
Garniture : graphite
Tube : rhodoïd
Raccordement : fileté mâle gaz
Body: bronze without stop valves
Tight: graphite
Tube: rhodoid
Ends: threaded male BSP
2525
P : 9 barT : 90°C
1/2"3/4"
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:45 Page86
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
87
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
RéférenceReference
GN 2240 Garniture de niveau / Water gaugesCorps : bronze
Siège et clapet : inox
Tube : rhodoïd
Raccordement : à bouts filetés
Body: bronze
Seat and disc:stainless steel
Tube: rhodoid
Ends: threaded male
162185185
P : 16 barT : 215°C
759090
2.153.205.30
1/2"3/4"1"
GN 2250 Garniture de niveau / Water gaugesCorps : bronze
Siège : inox
Tube : rhodoïd
Raccordement : à brides PN16
Body: bronze
Seat: stainless steel
Tube: rhodoid
Ends: flanged PN16
162185
P : 16 barT : 215°C
7590
3.304.50
1/2"3/4"
IN 2350 Indicateur de niveau / Reflex glassConstruction : bronze
Tube verre sur demande
Construction: bronze
Glass tube on request
125145170195220250280310350365
P : 16 bar T : 215°C
VapeurSteam
P : 13 bar
7595120145170200230260300320
1.652.002.502.753.103.704.204.855.155.30
Mesure - ContrôleNiveau
Measure - Control Gauge
m3/h
DébitFlow
IN 5350 Indicateur de niveau à réflexion pour vapeur, PN25Reflex gauge for steam, PN25Corps : acier
Raccordement : par tubulures
Option : corps bronze
Body: steel
Ends: with tubulures
On request: bronze body
P : 22 barT : 216°C
153178203233263293333353
3.54
4.34.75.26.67.17.5
RT 4240 Régulateur de température Samson / Samson temperature regulating valveCorps : fonte GS
Raccordement :à brides PN16 ou 25/40
Etanchéité : inox
Chapeau : fonte GS
Joints : Europil
Pour 40 bar :H est plus grand
Body: ductile iron
Ends: flanged PN16 or 25/40
Tight: stainless steel
Bonnet: ductile iron
Gasket: Europil
For 40 bar: H is higher
130150160180200230290310350400480
P : 25 barT : 50°C
P : 21 barT : 200°C
P : 16 barT : 350°C
515515515515515515590590645750880
55.56.513
13.51627324070113
1520253240506580100125150
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:45 Page87
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
88
RéférenceReference
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
CE 4240 Compteur Woltmann à brides / Flow meter flangedCorps : fonte GS
Raccordement :brides PN10
Etanchéité : acier
Montage : horizontal,vertical
Dispositif émetteur d'impultions sur demande
Body: ductile iron
Ends: flanged PN10
Tight: steel
Installation: horizontal, vertical
Remote read-out meter on request
200200225250300350
P : 16 barT : 30°C
138157155165195220
15254060150250
8.610.512.015.027.046.0
506580100150200
Mesure - ContrôleNiveau
Measure - Control Gauge
CE 11RACC Raccord de compteur / Meter fittingCorps : laiton Body: brass
20x2726x3433x4240x4950x6066x76
15x2120x2726x3433x4240x4950x60
152025304050
CE 1150 Compteur d’eau jet multiple - cadran noyé / Multi jet meter drowned dial typeCorps : laiton
Chapeau : laiton
Raccordement :filetage mâle
Option : raccord de compteur
Body: brass
Bonnet: brass
Ends: male threaded
Option: meter fitting
170190260260300300
P : 16 barT : 30°C
Eau froideCold water
120130140140160160
1.52.53.561015
152025324050
1.41.62.22.34.24.4
3/4"1"
1"1/41"1/2
2"2"1/2
m3/h
DébitFlow
CE 1140 Compteur d’eau jet unique / Single jet meterCorps : laiton
Raccordement :filetage mâle
Pose : vertical,horizontal
Chapeau : plastique
Calibre : 15 à 20
Option : raccord de compteur
Body: brass
Ends: male threaded
Mounting: horizontal,vertical
Bonnet: plastic
Bore: 15 to 20
Option: meter fitting
110130
P : 16 bar
Eau froideCold water
T : 30°C
Eau chaudeHot water
T : 90°C
8080
1.52.5
1520
0.410.60
3/4"1"
ø filetage
male threadedmm
CalibreGauge
Taraudageécrou
Threaded nut
Filetage douille
Threaded bushing
X 1160 Réduction taraudée/filetée pour manomètreFemale/male reducer for pressure gaugeCorps : laiton
Autres constructions :acier, inox
Body: brass
Other constructions: steel, stainless steel 1/8"
1/4"1/4"1/4"3/8"3/8"1/2"1/2"1/2"1/2"3/4"1/2"
1/4"1/8"3/8"1/2"1/4"1/2"1/4"3/8"3/4"
1/2"NPT1/2"1/2"
ø taraudage
female threaded
ø filetage
male threaded
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:45 Page88
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
89
RéférenceReference
MatériauxMaterials
DNPoids
Weight
mm
L
mm kg
HConditions de servicePressure
Temperature
X 1642 Amortisseur de pression pour manomètre / Pressure damper for pressure gaugeCorps : laiton
Raccordement : filetages mâle/femelle
Autres constructions : acier, inox, 630 bar maxi
Body: brass
Ends: male/female threaded
Other constructions: steel, stainless steel, max. 630 bar
P max. : 250 bar
1/4"1/2"
BC 1104 Robinet de manomètre à poussoir /Push button valve for pressure gaugeCorps : laiton
Raccordement : filetages femelle/femelle gaz
Body: brass
Ends: female/female threaded BSP
7373
P : 25 barT : 80°C
Gaz/GasP : 4 bar
5050
1/4"1/2"
Mesure - ContrôleNiveau
Measure - Control Gauge
X 1161 Écrou et tubulure à souder pour manomètreScrew and welding nozzle for pressure gaugeCorps : laiton Body: brass 1/4"
1/2"
X 6161 Écrou et tubulure inox à souder pour manomètreStainless steel screw and welding nozzle for pressure gaugeCorps : inox Body: stainless steel 1/4"
1/2"
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:45 Page89
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:45 Page90
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:45 Page91
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
92
Flexibles - Hose pipes
Robinetterie pour génie climatique
Air conditionningengineering valves
Robinetterie d’équilibrageBalancing valves
Robinetterie laiton et bronzeBrass and bronze valves
Consultez notre catalogue «Robinetterie d’équilibrage» et notre liste de prix
Consult our «Balancing valves» catalog and our prices list
Manomètres - ThermomètresNiveaux - Compteurs Pressure gauges - ThermometersLevel gauges - Flow meters
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page92
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page93
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
94
4959667587101164177195
0.360.520.711.061.442.266.619.3313.81
1520253240506580100
130150160180200230290310350
2025324050637590110
494959667587101164177195
0.200.210.320.440.640.901.524.426.9310.95
101520253240506580100
149124144154174194224284300340
162025324050637590110
101520253240506580100
0.200.190.310.440.640.881.494.387.2011.10
494959667587101164177195
162025324050637590110
103103115128146164199235270308
VKIV
Corps : PVC - Tige : PVC - Joint de tige : EPDM / FPM (type Viton®) - Joint de corps : EPDM / FPM (type Viton®) - Poignée : PVC - Sphère : PVC - Siège : PTFEBody: PVC - Stem: PVC - Stem seal: EPDM / FPM (type Viton®) - Body seal: EPDM / FPM (type Viton®) - Wrench: PVC - Ball: PVC - Seat: PTFE
T max. : 60°C - P max. : 16 bar (20°C).
Raccordements / EndsFemelles à coller / Solvent socket females ends
Raccordements / EndsMâles à coller / Solvent males ends
Raccordements / EndsA brides libres / Swivel flangedDIN 8063 PN10/16
VKDV VKOV
Robinets à boisseau sphérique PVC - industrie / PVC ball valves - industry
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
101520253240506580100
0.200.200.310.450.630.911.584.397.2611.10
494959667587101164177195
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
103110116134153156186235270308
VKFV Raccordements / EndsTaraudés / Threaded ends
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
Robinetterie plastique
PVCPlastic valve
PVC
Corps : PVC - Tige : PVC - Joint de tige : EPDM / FPM (type Viton®) - Joint de corps : EPDM / FPM (type Viton®) - Sphère : PVC - Siège : PTFE - Poignée : ABSBody: PVC - Stem: PVC - Stem seal: EPDM / FPM (type Viton®) - Body seal: EPDM / FPM (type Viton®) - Ball: PVC - Seat: PTFE - Wrench: ABS
T max. : 60°C - P max. : 16 bar (20°C).
Robinets à boisseau sphérique 3 voies PVC - industrie /Three ways PVC ball valves - industry
10152025324050
0.350.350.600.851.351.752.95
87.587.598.5106.0135.0139.0159.0
16202532405063
118.0118.0145.0160.0188.5219.0266.5
TKIV Raccordements / EndsFemelles à coller - passage en T ou en LSolvent socket females ends – T bore or L bore
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
10152025324050
0.350.350.600.851.351.752.95
87.587.598.5106.0135.0139.0159.0
3/8"1/2"3/4"1"
1"1/41"1/2
2"
118.0125.0146.0166.0195.5211.0253.5
TKFV Raccordements / EndsTaraudés - passage en T ou en LThreaded ends - T bore or L bore
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
Corps : PVC - Tige : PVC - Joint de tige : EPDM - Joint de corps : EPDM - Poignée : PVC - Sphère : PVC - Siège : PTFEBody: PVC - Stem: PVC - Stem seal: EPDM - Body seal: EPDM - Wrench: PVC - Ball: PVC - Seat: PTFE
T max. : 60°C - P max. : 16 bar (20°C).
Robinets à boisseau sphérique PVC / PVC ball valves
101520253240506580100
0.150.140.220.310.500.721.242.604.337.45
505058657685103133154175
162025324050637590110
828291103120139174216244309
VXIV Raccordements / EndsFemelles à coller / Solvent socket female ends
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
101520253240506580100
0.150.140.220.310.500.721.242.604.337.45
505058657685103133154175
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
829093110127131161216242309
VXFV Raccordements / EndsTaraudés / Threaded ends
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
L
H
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page94
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
95
Robinetterie plastique
PVCPlastic valve
PVC
Corps : PVC - Tige : PVC - Joint de tige : CR - Joint de corps : CR - Poignée : PVC - Sphère : PVC - Siège : PEBody: PVC - Stem: PVC - Stem seal: CR - Body seal: CR - Wrench: PVC - Ball: PVC - Seat: PE
T max. : 60°C - P max. : 16 bar (20°C).
Robinets à boisseau sphérique PVC - eau / PVC ball valves - water
Corps : PP - Joint de tige : EPDM - Poignée : ABS - Disque : PVC - Axe : Inox - Siège : EPDM / FPM (type Viton®) - Platine : ISO 5211.Body: PP - Stem seal: EPDM / FPM - Wrench: ABS - Disc: PVC - Stem: Stainless steel - Seat: EPDM / FPM (type Viton®) - Mounting plate: ISO 5211.
T max. : 60°C - P : 16 bar (DN40-50) ; P : 10 bar (DN65-250) ; P : 8 bar (DN300) - Entre brides PN10 / Between flanges PN10.
Vannes à papillon PVC - industrie / PVC butterfly valves - industry
VEIV Raccordements / EndsUnion femelles à coller / Solvent socket unionfemale ends
VEFV Raccordements / EndsTaraudés / Threaded ends
Avec poignée / With handle
* Avec collet / With colar: CFK* Avec collet / With colar: CFK
* Avec collet / With colar: CFK
FKOV Avec réducteur / With gear boxFKOV-CR
Corps : PVC - Joint de tige : EPDM - Poignée : ABS - Disque : PVC - Axe : Acier - Siège : EPDM / FPM (type Viton®) - Platine : ISO 5211.Body: PVC - Stem seal: EPDM / FPM - Wrench: ABS - Disc: PVC - Stem: Carbon steel - Seat: EPDM /FPM (type Viton®) - Mounting plate: ISO 5211.
T max. : 60°C - P : 16 bar (DN40-50) ; P : 10 bar (DN65-200) - Entre brides PN10 / Between flanges PN10.
Vannes à papillon PVC - eau / PVC butterfly valves - building
Avec poignée / With handleFEOV Avec réducteur / With gear boxFEOV-CR
101520253240506580100
0.150.140.220.310.500.721.242.604.337.45
505088657685103133154175
162025324050637590110
828291103120139174216244309
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
40506580100125*125150200*200
0.91.081.471.872.223.103.103.856.756.75
137143164178192212212225272272
50637590110125140160200225
33434649566464707171
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
6580100125*125150200*200250*250300
2.402.803.154.454.455.209.309.3018.6018.6025.60
208222236294294307356356406406463
7590110125140160200225250280315
4649566464707171114114114
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
40506580100125*125150200*200
0.821.011.421.641.993.033.033.738.248.24
136143168182196215215229309309
50637590110125140160200225
33434649566464707171
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
6580100125*125150200*200
2.382.602.954.404.405.109.269.26
208222236294294307356356
7590110125140160200225
4649566464707171
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
101520253240506580100
0.150.140.220.310.500.721.242.604.337.45
505088657685103133154175
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"4"
829093110127131161216242309
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
L
H
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page95
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
96
Robinets à soupape à tête inclinée PVC / PVC angle seat valves
Robinetterie plastique
PVCPlastic valve
PVC
Corps : PVC - Membrane : EPDM ou PTFE (CR) - Volant : ABS - Tige : acier zinguéBody: PVC - Diaphragm: EPDM or PTFE (CR) - Wrench: ABS - Stem: zinged steel
T max. : 60°C - P max. : 10 bar (20°C).
Robinets à membrane PVC / PVC diaphragm valves
1520253240506580100
0.700.700.701.501.502.407.007.0010.50
959595126126148225225295
2025324050637590110
124144154174194224284300340
VMDV Raccordements / EndsMâles à coller / Solvent socket male ends
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
VMOV Raccordements / EndsBrides libres / Swivel flanges - DIN 8063 PN10/16
152025324050
0.830.860.891.651.732.80
959595126126148
202532405063
147154168192222266
VMUIV Raccordements / EndsUnion femelles à coller / Solvent socket femaleunion ends
1520253240506580100
0.840.900.991.962.073.178.108.5012.40
959595126126148225225295
2025324050637590110
130150160180200230290310350
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
L
H
Corps : PVC - Siège : PVC - Volant : ABS - Clapet : PVC - Joint de tige / Siège : EPDM + PE ou PTFE + FPM - Tige : PVCBody: PVC - Seat: PVC - Handwheel: ABS - Disc: PVC - Stem steal / Seat: EPDM + PE or PTFE + FPM - Stem: PVC
10152025324050
0.230.250.410.620.901.322.23
124124146173195222269
16202532405063
135135158176207243298
VVUIV Raccordements / EndsUnion femelles à collerSolvent socket union females ends T max. : 60°C - P max. : DN10-25 : 16 bar (20°C),DN32-50 : 10 bar (20°C)
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
10152025324050
0.150.160.250.380.480.821.34
124124146173195222269
16202532405063
114124144154174194224
VVDV Raccordements / EndsMâles à coller / Solvent socket males ends T max. : 60°C - P max. : DN10-25 : 16 bar (20°C),DN32-50 : 10 bar (20°C)
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
6580100
3.194.116.04
326368420
7590110
243262325
VVIV Raccordements / EndsFemelles à collerSolvent socket females ends T max. : 60°C - P max. : DN65 : 10 bar (20°C), DN80-100 : 6 bar (20°C)
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page96
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
97
Robinetterie plastique
PVCPlastic valve
PVC
152025324050
0.110.200.310.470.661.12
202532405063
102124149172187224
SRIV Raccordements / EndsMâle - femelle à collerSolvent socket male - female ends
DNø tubeø pipe
PoidsWeight
mm
L
mmkg
Corps : PVC - Siège : PVC - Clapet : PVC - Joint : EPDM - Tige : PVCBody: PVC - Seat: PVC - Disc: PVC - Seal: EPDM - Stem: PVC
T max. : 60 °C - P max. : 16 bar (20°C).
Clapet de retenue à boule PVC / PVC ball check valve
Corps : PVC - Siège : PVC - Clapet : PVC - Joint : EPDM - Tige : PVC - Option : embouts taraudés fournisBody: PVC - Seat: PVC - Disc: PVC - Seal: EPDM - Stem: PVC - Option : supplied female threaded ends
T max. : 60 °C - P max. : 16 bar (20°C).
Clapet de pied PVC / PVC foot valves
10152025324050
0.100.120.210.350.560.761.34
16202532405063
101103125150171187223
VZIV Raccordements / EndsMâle - femelle à coller Solvent male -female threaded ends
DNø tubeø pipe
PoidsWeight
mm
L
mmkg
L
H
Corps : PVC - Clapet : PVC - Siège : EPDM / FPMBody: PVC - Disc: PVC - Seat: EPDM / FPM
Clapets de retenue à soupape PVC / PVC lift check valves
10152025324050
0.210.220.380.600.921.332.31
72728495111120139
16202532405063
135135158176207243298
VRUIV Raccordements / EndsUnion femelles à collerSolvent socket union females ends T max. : 60°C - P max. : 16 bar (20°C)
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
6580100
3.484.537.17
179192231
7590110
243262325
VRIV Raccordements / EndsFemelles à coller / Solvent socket female ends T max. : 60°C - P max. : DN 65 / 10 bar (20°C)DN 80-100 / 6 bar (20°C)
6580100
3.484.526.96
179192231
2"1/23"4"
243262325
VRFV Raccordements / EndsTaraudés / Threaded ends T max. : 60°C - P max. : DN65 / 10 bar (20°C)DN80-100 / 6 bar (20°C)
0.120.130.220.360.590.831.42
72728495111120139
10152025324050
114124144154174194224
16202532405063
Raccordements / EndsMâles à coller / Solvent socket male ends T max. : 60°C - P max. : 16 bar (20°C)
VRDV
Raccordements / EndsUnion taraudés / Female threaded union ends T max. : 60°C - P max. : 16 bar (20°C)
VRUFV
10152025324050
0.220.230.390.600.931.342.34
72728495111120139
3/8"1/2"3/4"1"
1"1/41"1/2
2"
135143160183214235285
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
Corps : PVC - Battant : PVC - Siège : EPDM ou FPMBody: PVC - Disc: PVC - Seat: EPDM or FPM
T max. : 60°C - P max. : 10 bar (20°C).
Clapet à battant PVCPVC wafer swing check valve
S460Raccordements / EndsEntre brides PN10 / Between flanges PN10
3240506580100125150200250300
0.080.100.170.240.290.420.590.891.873.084.59
8595109129144164195220275330380
4050637590110140160225280315
1516202020222226354045
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
E
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page97
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
98
Robinetterie plastique
PVCPlastic valve
PVC
Corps : PVC - Joint : EPDM / FPM - Pas de perforation : 1.5 - ø trou : 0.70 à 0.90 - Option : 0.7 - 1.0 - 2 - 2.5 - Tamis : PVCBody: PVC - Gasket: EPDM / FPM - Hole pintch: 1.5 - ø drilling: 0.70 to 0.90 - Option: 0.7 - 1.0 - 2 - 2.5 - Strainer: PVC
Filtres PVC / PVC strainers
10152025324050
0.200.210.350.520.731.091.84
72728495111120139
16202532405063
135135158176207243298
RVUIV Raccordements / EndsFemelles à collerSolvent socket females union ends T max. : 60°C - P max. : 16 bar (20°C)
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
10152025324050
0.200.210.350.520.731.091.84
72728495111120139
16202532405063
135135158176207243298
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
RVUFV Raccordements / EndsTaraudés / Threaded ends T max. : 60°C - P max. : 16 bar (20°C)
Raccordements / Endsfemelles à coller / Solvent socket female ends T max. : 60°C - P max. : 10 bar / 20°C (DN65), 6 bar / 20°C (DN80-100)
RVIV
2.382.974.61
179192231
6580100
243262325
7590110
Raccordements / Endsfemelles à coller / Solvent socket female endsCorps transparent / Transparent body T max. : 60°C - P max. : 6 bar / 20°C (DN65),4 bar / 20°C (DN80-100)
RVIT
0.110.120.190.280.400.600.94
72728495111120139
10152025324050
114124144154174194224
16202532405063
Raccordements / EndsMâle à coller / Solvent male ends T max. : 60°C - P max. : 16 bar (20°C)
RVDV
Raccordements / EndsFemelles à collerSolvent socket female union ends Corps transparent / Transparent bodyT max. : 60°C - P max. : 16 bar / 20°C (DN10-25), 10 bar / 20°C (DN32-50)
RVUIT
0.200.210.350.520.741.101.87
72728495111120139
10152025324050
135142159183214235285
3/8"1/2"3/4"1"
1"1/41"1/2
2"
Raccordements / EndsTaraudés / Threaded ends Corps transparent / Transparent bodyT max. : 60°C - P max. : 16 bar / 20°C (DN10-25), 10 bar / 20°C (DN32-50)
RVUFT
2.382.964.40
179192231
6580100
243262325
2"1/23"4"
Raccordements / EndsFemelles taraudées / Threaded female ends Corps transparent / Transparent bodyT max. : 60°C - P max. : 6 bar / 20°C (DN65), 4 bar / 20°C (DN80-100)
RVFT
2.382.974.61
179192231
6580100
243262325
7590110
0.200.210.350.520.741.101.87
72728495111120139
10152025324050
135142159183214235285
3/8"1/2"3/4"1"
1"1/41"1/2
2"
L
H
Corps : PVC / Body: PVC
T max. : 60°C.
Crépine PVC / PVC strainer
10152025324050
0.020.0250.0350.0450.0600.1000.150
3544576786106126
16202532405063
20253240506375
SZIV Raccordements / EndsMâle ou femelle à collerSolvent male or socket female ends
DNø tubeø pipe
PoidsWeight
mm
E
mm mmkg
H
Corps : PVC - Tige : PVC - Siège : PVC - Joint de tige : EPDMBody: PVC - Stem: PVC - Seat: PVC - Stem seal: EPDM
T max. : 60°C - P max. : 16 bar (20°C).
Ventouse PVC / PVC air release valve
152025324050
0.1050.1850.2800.4150.5700.950
103125150171187223
202532405063
55667587100122
VAIV Raccordements / EndsFemelle - mâle à collerSolvent female - male threaded ends
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page98
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
99
Vannes automatiques PVC / PVC automatic valves
Robinets à tournant sphérique à commande pneumatique Raccordements :Femelles à coller (VKIV/CP).Mâles à coller (VKDV/CP).Taraudés (VKFV/CP).A brides (VKOV/CP).
Pneumatic operating ball valvesEnds :Solvent socket female ends(VKIV/CP).Solvent male ends(VKDV/CP).Threaded ends (VKFV/CP).Flanged (VKOV/CP)
Robinet à tête inclinée pneumatique assistéRaccordements :mâles à coller
Pneumatically actuatedangle seat valveEnds:solvent male ends
VVDV/CP
Robinet à membrane pneumatique avec actionneur à diaphragme
Pneumatical operating diaphragm valve
VM.V/NO-DE
Robinet à membrane pneumatique avec actionneur à diaphragmenormalement ferméRaccordements :mâles à coller
Normaly close pneumaticaloperating diaphragm valveEnds : solvent male ends
VM.V/NC
Robinet à tournant sphérique à commande électrique toutes tensions AC/DCRaccordements :tous types de raccordements
Electrical operating ball valve any tensions Ends : any ends
VK.V/CE
Microvannes électriques / Electrical operating ball valve
Vanne à solénoïde à deuxvoies avec manchons-uniontaraudés
2 way solenoid valveFull bore with threaded unions
SF11-SF21
Vanne à solénoïde à troisvoies avec manchons-uniontaraudés
3 way solenoid valveFull bore with threaded unions
SF13-SF23
Vanne à solénoïde à deuxvoies avec manchons-union à coller
2 way solenoid valveFull bore with solvent socketunions
SI11-SI21
Vanne à solénoïde à troisvoies avec manchons-union à coller
3 way solenoid valveSolvent socket unions
SI13-SI23
Vanne à papillon type waferavec actionneur pneumatique
Butterfly valve wafer typewith pneumatical operating
FKOV/CP
Vanne à papillon type waferà commande électriqueRaccordements :pour collets à joint plat QPFet brides libres ODC.Toutes tensions AC/DC
Butterfly valve wafer typewith electrical operatingEnds:for QPF stubs and ODC swivel flanges.All tensions AC/DC.
Autres actionneurs pneumatiques : double effet, simple effet NF et NO.Pneumatic actuators types : double acting, NC and NO single acting.
FKOV/CE
VKIV/CPVKDV/CPVKFV/CPVKOV/CP
Robinetterie plastique
PVCPlastic valve
PVC
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page99
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
100
Robinetterie plastique
PVCPlastic valve
PVC
Raccords PVC / PVC fittings
Coude à 90° (ø : 12 - 400)Raccordements :femelles à coller
90° elbow (ø: 12 - 400)Ends:solvent socket female ends
GIV
Coude à 90°(ø : 16 x 3/8" - 110 x 4")Raccordements :femelle à coller et taraudépas du gaz cylindrique
Faucet elbow 90°(ø : 16 x 3/8" - 110 x 4")Ends:solvent socket female endand female BSP parallelthreaded end
GIFV
Courbe à 90° (ø : 3/8" - 4")Raccordements :taraudés pas du gaz cylindrique
90° elbow (ø : 3/8" - 4")Ends:female BSP parallel threaded ends
Coude à 45° (ø : 12 - 400)Raccordements :femelles à coller
45° elbow (ø : 12 - 400)Ends:solvent socket female ends
Coude à 45° formé (ø : 32 - 400)Raccordements :femelles à coller
Formed 45° elbow(ø : 32 - 400)Ends: solvent socket female ends
Coude à 45° (ø : 1/2" - 3")Raccordements :taraudés pas du gaz cylindrique
45° elbow (ø : 1/2" - 3")Ends:female BSP parallel threaded ends
Courbe 90° injecté (ø : 20 - 400)Grand rayon (R = 2D)Raccordements :femelles à coller
Injected 90° elbowLong radius (R = 2D)(ø : 20 - 400)Ends:solvent socket female ends
Courbe 90° formé(ø : 32 - 315)Raccordements :femelles à coller
Formed 90° elbow(ø : 32 - 315)Ends:solvent socket female ends
Coude 90°(ø : 16 x 3/8" - 63 x 2")Raccordements :femelle à coller et taraudépas du gaz cylindrique renforcé
90° elbow(ø : 16 x 3/8" - 63 x 2")Ends:solvent socket female endand reinforced metal ringfemale BSP parallel threaded end
Union 3 pièces (ø : 16 - 110)Raccordements :femelles à coller avec jointEPDM
3 pieces union (ø : 16 - 110)Ends:solvent socket female ends -EPDM O-ring
Union de passage 3 pièces(ø : 16 x 3/8" - 63 x 2")Raccordements :femelle à coller et taraudépas du gaz cylindrique avecjoint EPM - EPDM
3 pieces union(ø : 16 x 3/8" - 63 x 2")Ends:solvent socket female endand female BSP parallelthreaded end - EPM - EPDM O-ring
Union 3 pièces (ø : 3/8" - 2")Raccordements :taraudés pas du gaz cylindrique avec joint EPDM
3 pieces union (ø : 3/8" - 2")Ends:female BSP parallel threadedend - EPDM O-ring
Union 3 pièces (ø : 16 x 3/8" - 63 x 2")Raccordements :femelle à coller et fileté
3 pieces union(ø : 16 x 3/8" - 63 x 2")Ends:solvent socket female endand male threaded end
Té 90° égal (ø : 12 - 400)Raccordements :femelles à coller
Tee 90° equal (ø : 12 - 400)Ends:solvent socket females ends
Té 90° de passage(ø : 16 x 3/8" - 110 x 4")Raccordements :femelles à coller avec dérivation taraudée pas du gaz cylindrique
Faucet tee 90° (ø : 16 x 3/8" - 110 x 4")Ends:solvent socket female endsand female BSP parallelthreaded end
Té 90° égal (ø : 3/8" - 4")Raccordements :taraudés pas du gaz cylindrique
Tee 90° equal (ø : 3/8" - 4")Ends:female BSP parallel threadedends
Té 90° (ø : 16 x 3/8" - 63 x 2")Raccordements :femelles à coller avec dérivation taraudée pas du gaz cylindrique renforcée
Faucet tee 90° (ø : 16 x 3/8" - 63 x 2")Ends:solvent socket female endsand reinforced metal ringfemale BSP parallel threadedend
Té 90° réduit(ø : 25 x 20 - 400 x 315)Raccordements :femelles à coller avec dérivation réduite
Reduced bore 90° tee(ø : 25 x 20 - 400 x 315)Ends:solvent socket female endswith reduced solvent socketfemale end
Té 45° (ø : 20 - 160)Raccordements :femelles à coller
Tee 45° (ø : 20 - 160)Ends:solvent socket female ends
GFV
HIV
SHIV
HFV
SIV
SICV
GIMV
BIV
BIFV
BFV
BIRV
TIV
TIFV
TFV
TIMV
TRIV
YIV
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page100
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
101
Robinetterie plastique
PVCPlastic valve
PVC
Raccords PVC / PVC fittings
Croix 90° (ø : 20 - 110)Raccordements :femelles à coller
Cross 90° (ø : 20 - 110)Ends:solvent socket female ends
Douille cannelée (ø : 12 - 63)Raccordements :mâle à coller
Hose adapter (ø : 12 - 63)Ends:solvent male end
Embout cannelé(ø : 12 x 1/4" - 60 x 2")Raccordements :filetés pas du gaz cylindrique
Hose adapter(ø : 12 x 1/4" - 60 x 2")Ends:male BSP parallel threadedend
Embout cannelé(ø : 12 x 1/8" - 60 x 2 1/2")Raccordements :à écrou pas du gaz cylindrique
Hose adapter(ø : 12 x 1/8" - 60 x 2 1/2")Ends:nut connection - BSP parallelthreaded
Réduction (ø : 12 x 1/8" - 125 x 4")Raccordements :mâle à coller - taraudéefemelle pas du gaz
Reducing bush(ø : 12 x 1/8" - 125 x 4")Ends:solvent male end - femaleBSP parallel threaded
Réduction double et manchon réduit (ø : 16 x 12 - 200 x 160)Raccordements :mâle à coller sur le d -femelles à coller sur les 2 diamètres réduits
Reducer (ø : 16 x 12 - 200 x 160)Ends:solvent male end - solventfemale on 2 reduced diameters end
Collet conforme aux normes DIN 8063 PN10/16(ø : 20 - 500)Raccordements :femelles à coller pour jointsplats
Collar complying with DIN 8063 PN10/16(ø : 20 - 500)Ends:solvent socket female endfor flat gaskets
Joint EPDM - FPM pour collet QRV(ø : 20 - 500)
EPDM - FPM gasket for QRV collars (ø : 20 - 500)
Collet à joint toriqueconformes aux normes DIN 8063 PN10/16 (ø : 20 - 200)Raccordements :femelle à coller - siège pour joint torique, pourbride libre ODV
O-ring stubcomplying with DIN 8063 PN10/16 (ø : 20 - 200)Ends:solvent socket female - seat for O-ring gaskets forbacking rings ODV
Bride libre PN10/16DN : 15 - 500Raccordements :pour collets QGV et QRV - perçage DIN 8063 - UNI 2223
Backing ring PN10/16 DN : 15 - 500Ends:for stub QGV and QRV -drilled DIN 8063 - UNI 2223
Bride fixe PN10/16 DN : 200 - 100Raccordements :femelles à coller - perçageDIN 8063 - UNI 2223striées pour joints plats
Socket flange PN10/16DN : 200 - 100Ends:serrated socket for solvent -drilled DIN 8063 - UNI 2233 -serrated for flat gaskets
Bride pleine PN10/16DN : 20 - 300Raccordements :perçage DIN 8063 - UNI 2223
Blind flange PN10/16 DN : 20 - 300Ends:drilled DIN 8063 - UNI 2233
Manchon (ø : 12 - 400)Raccordements :femelles à coller
Double socket (ø : 12 - 400)Ends:solvent female ends
Réduction simple (ø : 16 x 12 - 400 x 315)Raccordements :mâle à coller - femelle à col-ler
Reducing bush(ø : 16 x 12 - 400 x 315)Ends:solvent male - solvent socket female threaded
Réduction simple (ø : 1/2" x 3/8" - 2" x 1 1/2")Raccordements :fileté - taraudé
Reducing bush(ø : 1/2" x 3/8" - 2" x 1 1/2")Ends:male threaded - femalethreaded
Réduction femelle/mâle(ø : 3/4" x 1/2" - 4" x 3")Raccordements :taraudé pas du gaz cylindrique - mâle pas du gaz cylindrique
Male/female reducing bush(ø : 3/4" x 1/2" - 4" x 3")Ends:female BSP parallel threaded end - male BSP parallel threaded end
Mamelon double réduit(ø : 1/2" x 1/8" - 4" x 3")Raccordements :filetés pas du gaz cylindrique
Barrel nippel reduced(ø : 1/2" x 1/8" - 4" x 3")Ends:male BSP parallel threaded
Réduction(ø : 16 x 3/8" - 75 x 2")Raccordements :mâle à coller - taraudée +frette
Reducer(ø : 16 x 3/8" - 75 x 2")Ends:solvent male end - femaleBSP parallel threaded withreinforced metal ring
Réduction double (ø : 1/2" x 1/8" - 4" x 3"Raccordements :fileté - femelle taraudée
Adapteur reducer(ø : 1/2" x 1/8" - 4" x 3")Ends:threaded - female threaded
AIV
XIV
AFV
ADV
DIFV
RIV
RFV
DIV
DFV
IFFV
NRFV
DIMV
QRV
QGV
JP
ODV
FDV
FCV
MIV
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page101
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
102
Manchon de réparation (ø : 63 - 315)Raccordements :sans butée - avec joint
Repair socket(ø : 63 - 315)Ends:without bumper - with gasket
KSZ
Embout adaptateur(ø : 16 x 3/8" - 125 x 4")Raccordements :mâle fileté pas du gaz cylindrique - femelle à colleret mâle réduit à coller
Double adaptator socketfemale/male(ø : 16 x 3/8" - 125 x 4")Ends:male BSP parallel threaded -solvent male and female end
Bouchon (ø : 12 - 225)Raccordements :femelles à coller
End caps (ø : 12 - 225)Ends:solvent female ends
Bouchon (ø : 3/8" - 4")Raccordements :taraudé pas du gaz cylindrique
End caps (ø : 3/8" - 4")Ends:female BSP parallel threaded end
Bouchon mâle (ø : 3/8" - 4")Raccordements :fileté pas du gaz cylindrique
Male plug (ø : 3/8" - 4")Ends:male BSP parallel threaded end
Raccords PVC / PVC fittings
Manchon (ø : 3/8" - 4")Raccordements :taraudés pas du gaz cylindrique
Double socket (ø : 3/8" - 4")Ends:female BSP parallel threaded ends
Raccord de réservoir (ø : 25 - 32)Raccordements :mâle à coller - fileté pas du gaz
Tank connector (ø : 25 - 32)Ends:male ends for solvent - maleBSP threaded end
Raccord de réservoir(ø : 25 x 3/4" - 90 x 4")Raccordements :passage de cloison
Tank connector(ø : 25 x 3/4" - 90 x 4")Ends:baffle passage
Mamelon double (ø : 3/8" - 4")Raccordements :filetés pas du gaz BSPcylindrique
Barrel nipple (ø : 3/8" - 4")Ends:male BSP parallel threaded end
Embout avec écrou laiton(ø : 20 x 1/2" - 63 x 2")Raccordements :mâle à coller avec écrou laiton
Adapter with brass nut(ø : 20 x 1/2" - 63 x 2")Ends:male for solvent - female BSP threaded
Union mixte(ø : 20 x 1/2" - 63 x 2")Raccordements :PVC femelle à coller - femelle taraudé fonte galvanisée
Mixte union(ø : 20 x 1/2" - 63 x 2")Ends:PVC female solvent socket -female threaded galvanisedcast iron
Union mixte(ø : 20 x 1/2" - 63 x 2")Raccordements :PVC femelle à coller - malefileté fonte galvanisée
Mixte union(ø : 20 x 1/2" - 63 x 2")Ends:PVC female solvent socketend - male threaded galvanised cast iron
Union mixte(ø : 16 x 3/8" - 63 x 2")Raccordements :PVC femelle à coller - laiton taraudé
Mixte union(ø : 16 x 3/8" - 63 x 2")Ends:PVC female solvent socket -threaded brass end
Union mixte(ø : 16 x 3/8" - 63 x 2")Raccordements :PVC femelle à coller - mâlelaiton fileté
Mixte union(ø : 16 x 3/8" - 63 x 2")Ends:PVC female solvent socket -male threaded brass end
Manchon (ø : 3/8" - 2")Raccordements :femelle à coller - taraudé pas du gaz cylindrique renforcé
Double socket (ø : 3/8" - 2")Ends:solvent female end - reinforced female BSP parallel threaded end
Robinetterie plastique
PVCPlastic valve
PVC
CIV
MFV
MIMV
KIFV
CFV
PFV
LIV
TLIV
NFV
UR-UL
12222
12223
BIFVO
BIRVO
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page102
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
103
Corps : PVC.C - Tige : PVC.C - Joint : EPDM / FPM - Poignée : ABS - Sphère : PVC.C - Siège : PTFEBody: PVC.C - Stem: PVC.C - Seal: EPDM / FPM - Wrench: ABS - Ball: PVC.C - Seat: PTFE
T max. : 100°C - P max. : DN10-50 : 16 bar (20°C) - DN65-100 : 10 bar (20°C).
Robinets à boisseau sphérique PVC.C / PVC.C ball valves
101520253240506580100
0.210.210.330.470.690.951.594.757.8312.13
494959667587101164177195
162025324050637590110
103103115128146164199235270308
VKIC Raccordements / EndsRaccords-union femelles à collerSolvent socket female unions
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
1520253240506580100
0.400.570.781.161.572.477.1110.0914.96
4959667587101164177195
2025324050637590110
130150160180200230290310350
VKOC Raccordements / EndsA brides PN10 / Flanged PN10
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
0.210.220.340.480.690.971.624.797.5411.92
494959667587101164177195
101520253240506580100
149124144154174194224284300340
162025324050637590110
Raccordements / EndsRaccords-union mâles à collerSolvent socket male unions
VKDC
Robinetterie plastique
PVC.CPlastic valve
PVC.C L
H
Corps : PVC.C - Axe : inox - Joint de tige : EPDM / FPM - Poignée : ABS - Disque : PVC.C - Manchette : EPDM / FPM - Type waferBody: PVC.C - Stem: stainless steel - Stem seal: EPDM / FPM - Wrench: ABS - Disc: PVC.C - Sleeve: EPDM / FPM - Wafer type
T max. : 100°C - P max. : DN40 et 50 : 16 bar (20°C), DN65 - 250 : 10 bar (20°C), DN300 : 8 bar.
Vannes à papillon PVC.C / PVC.C butterfly valves
40506580100125150200
0.901.081.471.872.223.103.856.75
137143164178192212225272
50637590110140160225
3343464956647071
FKOC Raccordements / EndsEntre-brides PN10 - PN16 / PN10 - PN16 Wafer
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
6580100125150200250300
2.402.803.154.455.209.3018.6025.60
208222236294307356406463
7590110140160225280315
464956647071114114
FKOC/CR Raccordements / Endsavec réducteur manuel et papillon PVC-C with gear box PVC-C discEntre-brides PN10 - PN16 / PN10 - PN16 Wafer
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
Corps : PVC.C - Joint : EPDM ou FPM - Bille : PVC-CBody: PVC.C - Seal: EPDM or FPM - Ball: PVC-C
T max. : 100°C - P max. : 16 bar (20°C).
Clapet de pied PVC.C / PVC.C foot valves
152025324050
0.120.220.340.520.721.12
55667587100120
202532405063
102124149172187224
SRIC Raccordements / EndsMâle - femelle à collerSocket solvent male - female
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page103
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
104
Vannes automatiques PVC.C / PVC.C automatic valves Robinet à tournant sphérique avec actionneurpneumatique
Pneumatical operating ballvalve
VK.C/CP
Robinet à membrane avecactionneur pneumatique -Normalement ouvert ouaction double
Diaphragm valve normalyopen with pneumatic actuator
VM.C/NO-DE
Vanne à papillon type waferavec actionneur pneumatique
Butterfly valve wafer typewith pneumatic actuator
FKOC/CP
Robinet à tournant sphérique à commande électriqueRaccordements : tous types Toutes tensions AC/DC
Electrical operating ball valveEnds : any endsAll tensions AC/DC
VK.C/CE
Robinet à membrane pneumatique -Normalement fermé
Normaly closed pneumaticactuator diaphragm valve
VM.C/NC
Vanne à papillon type waferà commande électriqueRaccordements :pour collets à joint plat QPFet brides libres ODCToutes tensions AC/DC
Butterfly valve wafer typeelectrical operatingEnds:for QPF stubs and ODC swivel flangesAll tensions AC/DC
FKOC/CE
Actionneurs pneumatiques possibles : double effet, simple effet NF et NO.Pneumatic actuators types : double acting, NC and NO single acting.
Robinetterie plastique
PVC.CPlastic valve
PVC.C
Corps : PVC.C - Membrane : EPDM ou PTFE (CR) - Volant : ABS - Tige : acier zinguéBody: PVC.C - Diaphragm: EPDM or PTFE (CR) - Wrench: ABS - Stem: zinged steel
T max. : 100°C - P max. : 10 bar (20°C).
Robinets à membrane PVC.C / PVC.C diaphragm valve
152025324050
0.860.890.931.721.802.91
959595126126148
202532405063
147154168192222266
VMUIC Raccordements / EndsUnion femelles à collerSolvent socket female unions
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
1520253240506580100
0.910.971.062.122.223.328.509.1513.20
959595126126148225225295
2025324050637590110
130150160180200230290310350
VMOC Raccordements / EndsBrides libres / Swivel flanges DIN 8063 PN10/16
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
0.720.720.721.561.562.507.267.2610.86
959595126126148225225295
1520253240506580100
124144154174194224284300340
2025324050637590110
Raccordements / EndsEmbouts mâle à coller, série métriqueSolvent socket male ends
VMDC
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page104
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
105
Robinetterie plastique
PVC.CPlastic valve
PVC.C
Raccords PVC.C / PVC.C fittings Coude 90° (ø : 16 - 160)Raccordements :femelles à coller
90° elbow (ø : 16 - 160)Ends:solvent socket female ends
GIC Té 90° égal (ø : 16 - 160)Raccordements :femelles à coller
Faucet tee 90° (ø : 16 - 160)Ends:solvent socket female ends
TIC Union 3 pièces(ø : 16 x 3/8" - 63 x 2")Raccordements :à coller - Pas du gazcylindrique - Joint EPDM.Option : FPM
3 pieces union(ø : 16 x 3/8" - 63 x 2")Ends:solvent socket union withfemale parrallel BSP threaded offtakeEPDM seal. Option FPM
BIFC
Embouts d’adaptation(ø : 20 x 3/8" - 75 x 2")Raccordements :mâle fileté - Pas du gazcylindrique - Femelle à colleret mâle réduit à coller
Double adaptor socket (ø : 20 x 3/8" - 75 x 2")Ends:female and other male reduced or male BSP cylindrical threaded
KIFC
Coude 90°(ø : 16 x 3/8" - 63 x 2")Raccordements :femelle à coller et taraudé -Pas du gaz cylindrique renforcé
90° elbow(ø : 16 x 3/8" - 63 x 2")Ends:solvent socket end and BSPthreaded ends - Reinforcedmetal ring BSP parallelthreaded
GIMC
DécapantBoite :1/2 litre
StripperBox :1/2 liter
D500
Colle PVC-CBoite :1/2 litre
Temper glueBox:1/2 liter
TEMPER GLUE
Bouchon (ø : 20 - 110)Raccordements :femelle à coller
Caps (ø : 20 - 110)Ends:solvent socket female ends
CIC
Collets conformes aux nor-mes DIN 8063 PN10/16(ø : 20 - 160)Raccordements :femelles à coller
Stub in accordance to DIN8063 PN10/16(ø : 20 - 160)Ends:solvent socket female ends
QRC
Té 90° réduit(ø : 25 x 20 - 400 x 315)Raccordements :femelles à coller.
Reduced bore 90° tee(ø : 25 x 20 - 400 x 315)Ends:solvent socket female ends.
TRIC
Manchon de passage(ø : 16 x 3/8" - 63 x 2")Raccordements :femelle à coller et taraudérenforcé
Double socket reinforced (ø : 16 x 3/8" - 63 x 2")Ends:one socket for solvent
MIMC
Té 90° (ø : 16 x 3/8" - 63 x 2")Raccordements :femelles à coller.
Faucet Tee 90° (ø : 16 x 3/8" - 63 x 2")Ends:solvent socket female ends.
TIMC
Brides libres NP 10/16(DN : 15 - 150)Raccordements :pour collets QR.Perçage DIN 8063 UNI 2223
PN10/16 swivel flange(DN : 15 - 150)Ends:for QR. stubsDrilling DIN 8063 UNI 2223
ODC
Coude 45° (ø : 20 - 160)Raccordements :femelles à coller
45° elbow (ø : 20 - 160)Ends:solvent socket female ends
HIC
Union 3 pièces (ø : 16 - 63)Raccordements :femelle à coller avec joint enEPDM. Option : FPM
3 pieces union (ø : 16 - 63)Ends:solvent socket female endswith EPDM seal. Option: FPM
BIC
Réduction simple(ø : 20 x 16 - 160 x 110)Raccordements :mâle à coller - Femelle à coller sur le ø réduit
Reducer(ø : 20 x 16 - 160 x 110)Ends:solvent male - Solvent socketfemale reduced
DIC
Union mixte femelle(ø : 16 x 3/8" - 63 x 2")Raccordements :taraudé femelle laiton - PVC-C à coller femelle
Female union(ø : 16 x 3/8" - 63 x 2")Ends:female BSP threaded Brass / PVC-C
BIFCO
Union mixte mâle(ø : 16 x 3/8" - 63 x 2")Raccordements :fileté laiton - PVC-C à collerfemelle
Male union(ø : 16 x 3/8" - 63 x 2")Ends:male BSP threadedBrass / PVC-C
BIRCO
Manchon (ø : 16 - 160)Raccordements :femelles à coller
Socket (ø : 16 - 160)Ends:solvent socket female ends
MIC
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:46 Page105
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
106
Robinetterie plastique
PEPlastic valve
PE
Raccords PE / PE fittings
Té 90° embout longTee 90° long spigot ø : 25 - 315PE 80 : PN6 - 10 - 16 PE 100 : PN10 - 16 - 20 - 25
Té réduit 90° embout long injecté et soudure bout à bout Reduced tee 90° long spigot-injection mouldedand buttweldedø : 50 - 225PE 80 : PN6 - 10 - 16 PE 100 : PN10 - 16 - 20 - 25
Croix segmentée et soudure bout à bout Cross segmented and buttweldingø : 110 - 630PE 80 : PN6 - 10 - 16 PE 100 : PN10 - 16
Coude 90° embout longinjectéElbow 90° injection mouldedø : 25 - 315PE 80 : PN6 - 10 - 16 PE 100* : PN10 - 16 - 25
Coude 45° embout longinjectéElbow 45° injection mouldedø : 32 - 315PE 80 : PN6 - 10 - 16 PE 100* : PN10 - 16 - 20 - 25
Courbe 90° segmentée etsoudure bout à bout Bend 90° segmented through buttwelding ø : 160 - 1000PE 80 : PN2.5 - 3.2 - 4 - 6 - 10 - 16PE 100 : PN4 - 6 - 10 - 16
Courbe 60° segmentée etsoudure bout à bout Bend 60° segmented through buttwelding ø : 160 - 1000PE 80 : PN2.5 - 3.2 - 4 - 6 - 10 - 16PE 100 : PN4 - 6 - 10 - 16
Té réduit 90° renforcé injectéet soudure bout à bout Reduced tee 90° reinforced injection moulded and buttweldedø : 355 - 630PE 80 : PN6 - 10 PE 100 : PN6 - 10 - 16
Té réduit 90° segmenté et soudure bout à boutReduced tee 90° segmenteded and buttweldedø : 250 - 1000PE 80 / 100 : PN4
Té 45° segmenté par soudure bout à boutTee 45° segmented through buttweldingø : 110 - 630PE 80 / 100 : PN4 - 6 - 10 - 16
Té 90° renforcéTee 90° injection moulded and buttwelded ø : 80 - 355PE 80 : PN6 - 10PE 100 : PN6 - 10 - 16
Té 90° à secteur par soudure bout à bout Tee 90° segmented through buttwelding ø : 160 - 1000PE 80 / 100* : PN4
Té réduit 90° embout long injectéReduced tee 90° long spigot-injection moulded ø : 63 - 315PE 80 : PN6 - 10 - 16 PE 100* : PN10 - 16 - 20 - 25
Courbe 45° segmentée etsoudure bout à bout Bend 45° segmented through buttwelding ø : 160 - 1000PE 80 : PN2.5 - 3.2 - 4 - 6 - 10 - 16 PE 100 : PN4 - 6 - 10 - 16
Courbe 30° segmentée etsoudure bout à bout Bend 30° segmented through buttwelding ø : 160 - 1000PE 80 : PN2.5 - 3.2 - 4 - 6 - 10 - 16 PE 100 : PN4 - 6 - 10 - 16
* SDR 11 : PN16 - SDR 17.6 : PN10
TBEL
TBER
TBE
TRBE
TRBEL
TRBEC
TSBE
THBE
XBE
GBE
HBE
GSBE
GJBE
GHBE
GEBE
Réduction embout longinjectéReducer long spigot injection moulded ø : 32 - 200PE 80 : PN6 - 10 - 16PE 100 : PN10 - 16 - 20 - 25
RBEL
Réduction embout courtinjectéReducer short spigot injection moulded ø : 250 - 1000PE 80 : PN4 - 6 - 10 - 16PE 100 : PN6 - 10 - 16 - 25
Collet embout long injectéStubend long spigot injection mouldedø : 25 - 315PE 80 : PN2.5 - 3.2 - 4 - 6 - 10 - 16PE 100 : PN4 - 6 - 10 - 16 - 20 - 25
Collet embout court injectéStubend short spigot injection mouldedø : 280 - 1200PE 100* : PN6 - 10 - 16 - 25
RBEC
QBEL
QBE
BouchonCapø : 25 - 355PE 80 : PN6 - 10 - 16 - 25PE 100 : PN6 - 10 - 16 - 20 - 25
CBE
Réduction concentriqueRaccordement : à souder bout à bout
Concentric reducingEnds: buttwelding
PE 100* : PN6 - 10 - 16 - 25
RBE
Bride pour collet QB.Ame acier moulée dans PPRaccordements :perçage PN10
Flange for QB. stubPP steel reinforcedEnds: flanged PN10
Mamelon filetéRaccordements :à souder bout à bout, mâlePE 100*
Threaded nippleEnds: buttwelding polyfusion male threadedPE 100*
Union 3 piècesRaccordements :à souder bout à boutPE 100*
3 pieces unionEnds: buttweldingPE 100*
Raccords soudure bout à bout PE / PE fittings for buttwelding
ODS MMBE BBE
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:47 Page106
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
107
Corps : PP - Tige : PP - Joint : EPDM / FPM - Poignée : ABS - Sphère : PP - Siège : PTFEBody: PP - Stem: PP - Seal: EPDM / FPM - Wrench: ABS - Ball: PP - Seat: PTFE
T max. : 100°C - P max. : 10 bar à 20°C
Robinets à boisseau sphérique PP / PP ball valves
1520253240506580100
0.130.200.300.430.631.053.095.087.72
4959667587101164177195
2025324050637590110
102114126141164199213239268
VKIM Raccordements / EndsRaccords-union femelles à souderSocket union ends
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
Corps : PP - Tige : PP - Joint : EPDM / FPM - Sphère : PP - Siège : PTFE - Passage : en T ou L - Poignée : ABSBody: PP - Stem: PP - Seal: EPDM / FPM - Ball: PP - Seat: PTFE T or L bore - Wrench: ABS
T max. : 100°C - P max. : 10 bar à 20°C
Robinet à boisseau sphérique 3 voies PP / Three ways PP ball valve
152025324050
0.230.400.560.891.161.94
87.587.598.5106135139
202532405063
117144158
183.5219
266.5
TKIM Raccordements / EndsRaccords-union femelles à souder par fusionFemale for polyfusion union ends
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
1520253240506580100
0.290.420.580.881.181.804.506.459.09
4959667587101164177195
2025324050637590110
130150160180200230290310350
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
0.140.210.300.430.621.063.195.288.01
4959667587101164177195
1520253240506580100
124144154174194224284300340
2025324050637590110
Raccordements / EndsRaccords-union mâles à souder par fusionMale for polyfusion union endsT max. : 60°C - P max. : 10 bar (20°C),
VKDM
Raccordements / EndsRaccords à brides tournantes PVC-C PN10PN10 swivel flangesT max. : 60°C - P max. : 10 bar (20°C),
VKOM
Robinetterie plastique
PPPlastic valve
PP L
H
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:47 Page107
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
108
Corps : PP - Membrane : EPDM ou PTFE (CR) - Volant : ABS - Tige : acier zinguéBody: PP - Diaphragm: EPDM or PTFE (CR) - Wrench: ABS - Stem: zinged steel
T max. : 100°C - P max. : 10 bar (20°C)
Robinets à membrane PP / PP diaphragm valves
152025324050
0.710.750.781.421.462.38
959595126126148
202532405063
147154168192222266
VMIUM Raccordements / EndsRaccords-union femelles à souder par fusionFemale for polyfusion union ends
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
0.600.600.601.201.201.906.006.009.00
959595126126148225225295
1520253240506580100
124144154174194224284300340
2025324050637590110
Raccordements / EndsMâles à souder par fusionMale for polyfusion ends
VMDM
1520253240506580100
0.740.800.891.661.772.677.107.5011.35
959595126126148225225295
2025324050637590110
130150160180200230290310350
VMOM Raccordements / EndsA brides libres PN10 With PN10 swivel flanges
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
Corps : PP - Axe : PP - Joint de tige : EPDM ou FPM - Poignée : ABS - Papillon : PP - Manchette : EPDM / FPM - Type wafer - Option : avec réducteurBody: PP - Stem: PP - Stem seal: EPDM or FPM - Wrench: ABS - Disc: PP - Sleave: EPDM or FPM - Type wafer - Option: with gear box
T max. : 100°C - P max. : 10 bar (20°C) ; 8 bar (DN300)
Vannes à papillon PP/ PP butterfly valves
40506580100125150200250250300
0.570.751.001.401.752.553.306.0012.0012.0019.00
106112119133147167180227248248305
50637590110140160225250280315
3343464956647071114114114
FKOM Raccordements / EndsEntre brides / Wafer PN10
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
Corps : PP - Tamis : PP / inox - Maille : 1.5 - Joint : FPMBody: PP - Strainer: PP : stainless steel - Screen: 1.5 - Gasket: FPM
Filtres à tamis PP incliné / PP Y type strainers
152025324050
0.140.190.290.470.671.10
718394109119
142.5
202532405063
137.5157
178.5205
243.5294
RVUIM Raccordements / EndsRaccords-union femelles à souder par fusionFemale for polyfusion union endsT max. : 100°C - P max. : 10 bar (20°C)
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
6580100
1.581.923.00
176193229
7590110
241260323
RVIM Raccordements / EndsFemelle à souder par fusionFemale for polyfusion endsT max. : 100°C - P max. : 6 bar / 20°C (DN65),4 bar / 20°C (DN80-100)
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
6580100125150200250250300
2.402.803.154.459.309.3018.6018.6025.60
208222236294307356406406463
7590110140160225250280315
464956647071114114114
Avec réducteur / With gear boxRaccordements / EndsEntre brides / Wafer PN10
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
FKOM-CR
L
HRobinetterie plastique
PPPlastic valve
PP
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:47 Page108
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
109
Corps : PP - Piston : PP - Couvercle : PP - Siège : FPMBody: PP - Disc: PP - Cap: PP - Seat: FPM
T max. : 100°C - P max. : 10 bar (20°C).
Clapets de retenue à soupape PP/ PP lift check valves
152025324050
0.160.220.380.640.911.55
718394109119
142.5
202532405063
137.5157
178.5205
243.5294
VRUIM Raccordements / EndsRaccords-union femelles à souderFemale for polyfusion union ends
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
6580
2.453.13
176192
7590
241260
VRIM Raccordements / EndsFemelles à souder / Female polyfusion ends
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
Corps : PP - Boule : PP - Siège : FPM Body: PP - Ball: PP - Seat: FPM
T max. : 100°C - P max. : 10 bar (20°C).
Clapet de retenue à soupape PPPP lift check valve
152025324050
0.070.140.210.320.440.75
105126150173188222
202532405063
5566748699120
SRIM Raccordements / EndsFemelles à souder / Female polyfusion ends
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
Corps : PP - Battant : PP - Siège : EPDM / FPMBody: PP - Disc: PP - Seat: EPDM / FPM
T max. : 100°C - P max. : 10 bar (20°C).
Clapet de retenue à battant PPPP swing check valve
3240506580100125150200250300
0.060.070.170.200.290.410.621.312.163.214.50
1516202020222226354045
4050637590110140160225280315
8595109129144164195220275330380
S460 Raccordements / EndsEntre brides / Wafer PN10
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
L
HRobinetterie plastique
PPPlastic valve
PP
Vannes automatiques PP / PP automatic valves Robinet à tournant sphérique avec actionneurpneumatique
Pneumatical operating ball valve
Vanne à papillon type waferavec actionneur pneumatique
Butterfly valve wafer typewith pneumatical operating
Robinet à membrane actionneur pneumatique
Pneumatical diaphragm operating diaphragm valve
Robinet à membrane pneumatique actionneur à diaphragme -Normalement fermé
Normaly closed pneumaticaldiaphragm operating diaphragm valve
Vanne à papillon type waferà commande électriqueRaccordements :pour collets à joint plat QPFet brides libres ODCToutes tensions AC/DC
Butterfly valve wafer typewith electrical operatingEnds:for QPF stubs and ODC swivel flangesAll tensions AC/DC
Robinet à tournant sphérique à commande électriqueRaccordements : tous types de raccordementToutes tensions AC/DC
Electrical operating ball valveEnds: any endsAll tensions AC/DC
Autres actionneurs pneumatiques : double effet, simple effet NF et NO.Pneumatic actuators types : double acting, NC and NO single acting.
VK.M/CP
VK.M/CE
FKOM/CP
FKOM/CE
VM.M/NC
VM.M/NO-DE
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:47 Page109
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
110
Robinetterie plastique
PPPlastic valve
PP
Raccords PP soudure dans l’emboiture / PP fittings socket welding Coude 90°Raccordements :femelles à souder
90° elbowEnds:female polyfusion
Bride pour collet QB.Ame acier moulée dans PPRaccordements :perçage PN10
Flange for QB. stubPP steel reinforcedEnds: flanged PN10
ManchonRaccordements :femelles à souder
Double socket Ends:female polyfusion
Manchon Raccordements :femelle à souder - pas du gaz cylindrique baguerenfort
Socket Ends:female polyfusion - reinforced metal ring BSPparallel threaded
Réduction doubleRaccordements :mâle à souder - femelle àsouder réduit
Double reducerEnds:male polyfusion - femalereduced polyfusion
Embout canneléRaccordements :mâle à souder
Hose adaptorEnds:male polyfusion
Union 3 piècesRaccordements :femelle à souder avec jointFPM - écrou pas du gaz cylindrique avec joint FPM
3 pieces unionEnds:female polyfusion FPM seal
Union 3 piècesRaccordements :femelle à souder - écrou pas du gaz cylindrique avec joint FPM
3 pieces unionEnds:female polyfusion - parallelBSP threaded end FPM seal
Té 90° égalRaccordements :femelles à souder
Faucet tee 90°Ends:female polyfusion
ColletRaccordements :femelle à souder
StubEnds:female polyfusion
Brides libres NP 10/16(DN : 15 - 150)Raccordements :pour collets QR.Perçage DIN 8063 UNI 2223
PN10/16 swivel flange(DN : 15 - 150)Ends:for QR. stubsDrilling DIN 8063 UNI 2223
GIM
BIMG
BIFM
TIM
MIM
ODS
ODC
QRM
MIMM
RIM
AIM
Raccords à souder bout à bout PP / PP fittings for buttweldingSDR 11 - PN10 SDR 17,6 - PN6
Coude 90°Raccordements :à souder bout à bout
90° elbowEnds:buttwelding
GBM
Coude 45°Raccordements :à souder bout à bout
45° elbowEnds:buttwelding
Té égalRaccordements :à souder bout à bout
Facet teeEnds:buttwelding
MamelonRaccordements :à souder bout à bout, fileté mâle
NippelEnds:buttwelding polyfusion, male threaded
BouchonRaccordements :à souder bout à bout
CapsEnds:buttwelding
ColletRaccordements :à souder bout à bout
StubEnds:buttwelding
Réduction concentriqueRaccordements :à souder bout à bout
ReducerEnds:buttwelding
Bride pour collet QB.Ame acier moulée dans PPRaccordements :perçage PN10
Flange for QB. stubPP steel reinforcedEnds: flanged PN10
Té réduitRaccordements :à souder bout à bout
Reduced teeEnds:buttwelding
Union 3 piècesRaccordements :à souder bout à bout
3 pieces unionEnds:buttwelding
HBM
TBM
MMBM
CBM
QBM
RBMBBM
TRBM
ODS
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:47 Page110
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
111
Robinetterie plastique
PVDFPlastic valve
PVDF
Corps : PP - Axe : inox - Joint : FPM - Poignée : ABS - Disque : PVDF - Manchette : EPM / FPM - Type wafer - Avec réducteurBody: PP - Stem: Stainless steel - Seal: FPM - Wrench: ABS - Disc: PVDF - Sleeve: EPM / FPM - Wafer type - With gear box
T max. : 140°C - P max. : 16 bar (20°C).
Vannes à papillon PVDF / PVDF butterfly valves
Corps : PVDF - Tige : PVDF - Joint : FPM - Poignée : ABS - Sphère : PVDF - Siège : PTFEBody: PVDF - Stem: PVDF - Seal: FPM - Wrench: ABS - Ball: PVDF - Seat: PTFE
Robinets à boisseau sphérique PVDF / PVDF ball valves
Corps : PVDF - Membrane : PTFE (CR) - Volant : ABS - Tige : acier zinguéBody: PVDF - Diaphragm: PTFE (CR) - Wrench: ABS -Stem: zinged steel
T max. : 120°C - P max. : 10 bar (20°C).
Robinets à membrane PVDF / PVDF diaphragm valves
101520253240506580
0.250.240.370.540.781.081.863.446.03
494959667587101124142
162025324050637590
105105114126141163195212262
VKIF Raccordements / EndsEmboitements femelles à souder Females polyfusionT max. : 120°C - P max. : DN10-50 : 16 bar (20°C),DN65-80 : 10 bar (20°C).
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H 1520253240506580100
0.290.420.580.881.181.804.506.459.09
4959667587101164177195
2025324050637590110
130150160180200230290310350
VKOF Raccordements / EndsA brides tournantes / Swivel flanges PN10T max. : 120°C - P max. : 10 bar (20°C)
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
152025324050
0.860.890.931.721.802.91
959595126126148
202532405063
147154168192222266
VMUIF Raccordements / EndsUnion femelles à souderUnion female polyfusion
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
0.70.70.71.51.52.47.07.010.5
959595126126148225225295
1520253240506580100
124144154174194224284300350
2025324050637590110
Raccordements / EndsMâles à souder / Male polyfusionVMDF
1520253240506580100
0.0950.1050.1150.1400.1500.1650.1850.2000.220
959595126126148225225295
2025324050637590110
130150160180200230290310350
VMOF Raccordements / EndsA brides tournantes / Swivel flanges DIN 8063PN10
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
40506580100125150200
0.991.181.612.052.443.414.237.42
137143164178192212225272
50637590110140160225
3343464956647071
FKOF Raccordements / EndsEntre-bride PN10 - PN16 / PN10 - PN16 Wafer type
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
6580100125150200250300
2.643.083.464.895.7210.2320.4628.16
208222236294307356406463
7590110140160225280315
464956647071114114
FKOF/CR Raccordements / Endsavec réducteur manuel et papillon PVC-C with gear box PVC-C discEntre-bride PN10 - PN16 / PN10 - PN16 Wafer type
DNø tubeø pipe
PoidsWeight
mm
L
mm mmkg
H
L
H
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:47 Page111
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
112
Vannes automatiques PVDF / PVDF automatic valves Robinet à tournant sphérique à commandepneumatique SEAT STOP
Pneumatical operating ballvalve SEAT STOP
VK.F/CP Vanne à papillon entre bridesavec actionneur pneumatiqueRaccordements :pour collets à joint plat QPFet brides libres ODC
Wafer type butterfly valvewith pneumatical operatingEnds:for QPF stubs and ODC swivel flanges
FKOF/CP
Vanne à papillon entre bridesà commande électriqueRaccordements :pour collets à joint plat QPFet brides libres ODCToutes tensions AC/DC
Wafer type butterfly valvewith electrical operatingEnds:for QPF stubs and ODC swivel flangesAll tensions AC/DC
FKOF/CE
Robinet à membrane pneumatique actionneur àdiaphragme - NormalementferméRaccordements :mâles
Normaly closed pneumaticaldiaphragm operating diaphragm valveEnds: males threaded ends
VM.F/NC
Robinet à tournant sphérique à commande électrique SEAT STOPRaccordements : femelles à souder - à bridesToutes tensions AC/DC
Electrical operating ballvalveSEAT STOPEnds:solvent socket ends - flangesAll tensions AC/DC
VK.F/CE
Robinet à membrane pneumatique avec actionneur à diaphragmedouble effet
Pneumatical diaphragmvalve operating with doubleacting diaphragm operating
VM.F/NO-DE
Raccords PVDF à souder dans l’emboiture / PVDF socket welding fittings Coude 90° (ø : 16 - 110)Raccordements :à souder
90° elbow (ø : 16 - 110)Ends:socket welding
GIF
Coude 45° (ø : 16 - 110)Raccordements :à souder
45° elbow (ø : 16 - 110)Ends:socket welding
HIF
Collet conforme aux normesDIN (ø : 20 - 110)Raccordements :à souder
Stub in accordance to DIN standard (ø : 20 - 110)Ends:solvent socket welding
QRF
Bouchon femelle (ø : 16 - 110)Raccordements :à souder
Female cap (ø : 16 - 110)Ends:solvent socket end cap
CIF
Embouts d’adaptation(ø : 16 x 3/8" - 63 x 2")Raccordements :mâle fileté - mâle à souder
Adaptor(ø : 16 x 3/8" - 63 x 2")Ends:male threaded - male socketwelding
KIFF
Mamelon d’adaptation(ø : 16 x 3/8" - 63 x 2")Raccordements :femelle taraudé - femelle àsouder
Adaptor reducer(ø : 16 x 3/8" - 63 x 2")Ends:female threaded - femalesocket welding
MIFF
Raccord union joint FPM(ø : 16 à 63)Raccordements :Union femelles à coller
3P union (ø : 16 to 63)Ends:Female socket welding
BIF
Manchon (ø : 16 - 110)Raccordements :à souder
Adaptor (ø : 16 - 110)Ends:socket welding
MIF
Réduction (ø : 20 x 16 - 110 x 90)Raccordements :mâle à souder - Femelleréduit à souder
Reducer (ø : 20 x 16 - 110 x 90)Ends:male socket welding - female reduced socket welding
RIF
Té égal (ø : 16 - 110)Raccordements :femelle à souder
Egal tee (ø : 16 - 110)Ends:female socket welding
TIF
Robinetterie plastique
PVDFPlastic valve
PVDF
Actionneurs pneumatiques possibles : double effet, simple effet NF et NO.Pneumatic actuators types : double acting, NC and NO single acting.
TECOFI-VOL2_FR-p79-112_CATAL_FABRICANT.qxd 27/06/13 14:47 Page112
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:52 Page113
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
114
H
L
B
Robinetterie pour vapeur Steam valves
PFF4140 Purgeur à flotteur fermé avec purgeur d'airFloat and thermostatic steam trap
RéférenceReference
MatériauxMaterials
Corps : GGG 40
Chapeau : GGG 40
Joint : sans amiante
Siège : AISI 410
Flotteur : AISI 304
Raccordement :taraudé gaz
Body: GGG 40
Bonnet: GGG 40
Gasket: non asbestos
Seat: AISI 410
Float: AISI 304
Ends: female threaded - BSP
DNPoids
Weight
mm
L
mm mm kg
H BConditions de servicePressure
Temperature
122122120270300
P : 14 barT : 198°C
P max. : 16 bar
T max. : 250°C
150150195240250
6868---
3.53.59.017.021.6
1/2"3/4"1"
1"1/22"
PFF4240 Purgeur à flotteur fermé avec purgeur d'airFloat and thermostatic steam trapCorps : GGG 40
Chapeau : GGG 40
Joint : sans amiante
Siege : AISI 410
Flotteur : AISI 304
Raccordement : à brides PN10
Body: GGG 40
Bonnet: GGG 40
Gasket: non asbestos
Seat: AISI 410
Float: AISI 304
Ends: flanged - PN10
150150160230230
P : 14 barT : 198°C
P max. : 16 bar
T max. : 250°C
150150245330340
4.44.911.320.927.8
1520254050
PFI4140 Purgeur à flotteur inversé ouvert / Inverted bucket steam trapCorps : GGG 40
Chapeau : GGG 40
Joint : sans amiante
Siège : AISI 410
Flotteur : AISI 304
Raccordement : taraudé gaz
Body: GGG 40
Bonnet: GGG 40
Gasket: non asbestos
Seat: AISI 410
Float: AISI 304
Ends: female threaded - BSP
175175175
P : 14 barT : 230°C
P max. : 16 bar
T max. : 250°C
219219219
6.96.97.0
1/2"3/4"1"
PTD6160 Purgeur thermodynamique / Thermodynamic steam trapCorps : AISI 420
Chapeau : AISI 304
Disque : AISI 420
Capot : AISI 304
Raccordement : taraudé gaz
Body: AISI 420
Bonnet: AISI 304
Disc: AISI 420
Insulating cap: AISI 304
Ends: female threaded - BSP
70708083
P : 40 barT : 350°C
P max. : 63 bar
T max. : 400°C
48526077
0.580.610.901.30
3/8"1/2"3/4"1"
15151925
127127127
4552.557.575
82.5
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:52 Page114
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
115
Robinetterie pour vapeur Steam valves
DNPoids
Weight
mm
L
kg
PTD5160 Purgeur thermodynamique / Thermodynamic steam trapCorps : C 22.8 (A105)
Chapeau : inox
Joint : graphite pur
Siège : AISI 431
Disque : AISI 431
Filtre : AISI 304
Raccordement : taraudé gaz
Body: C 22.8 (A105)
Bonnet: stainless steel
Gasket: pure graphite
Seat: AISI 431
Disc: AISI 431
Strainer screen: AISI 304
Ends: female threaded - BSP
8080100
P : 42 barT : 400°C
P max. : 63 bar
T max. : 400°C
96105115
1.01.21.8
1/2"3/4"1"
PTD5260 Purgeur thermodynamique / Thermodynamic steam trapCorps : C 22.8 (A105)
Chapeau : inox
Joint : graphite pur
Siège : AISI 431
Disque : AISI 431
Filtre : AISI 304
Raccordement : à brides PN40
Body: C 22.8 (A105)
Bonnet: stainless steel
Gasket: pure graphite
Seat: AISI 431
Disc: AISI 431
Strainer screen: AISI 304
Ends: flanged - PN40
150150160
P : 42 barT : 400°C
P max. : 63 bar
T max. : 400°C
96105115
2.53.34.4
152025
RéférenceReference
MatériauxMaterials
Conditions de servicePressure
Temperature
565865
565865
H
mm
B
mm
PBM5150 Purgeur bimétallique et éliminateur d'air Bimetallic steam trap and air eliminatorCorps : acier
Chapeau : acier
Joint : sans amiante
Disque : inox
Filtre : inox
Raccordement : taraudé gaz
Body: steel
Bonnet: steel
Gasket: non asbestos
Disc: stainless steel
Strainer screen: stainless steel
Ends: female threaded
959595
P : 22 barT : 250°C
P max. : 32 bar
T max. : 300°C
133133133
2.32.32.3
1/2"3/4"1"
PBM5250 Purgeur bimétallique et éliminateur d'airBimetallic steam trap and air eliminatorCorps : acier
Chapeau : acier
Joint : sans amiante
Disque : inox
Filtre : inox
Raccordement : à brides PN25
Body: steel
Bonnet: steel
Gasket: non asbestos
Disc: stainless steel
Strainer screen: stainless steel
Ends: flanged - PN25
150150160
P : 22 barT : 250°C
P max. : 32 bar
T max. : 300°C
133133133
3.94.75.1
152025
525252
525252
H
L
B
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:53 Page115
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
116
Robinetterie pour vapeur Steam valves
DNPoids
Weight
mm
L
mm kg
H
PTH5150 Purgeur thermostatique et éliminateur d'airThermostatic steam trap and air eliminatorCorps : C22.8 (A 105)
Chapeau : C22.8 (A 105)
Joint : graphite
Siège : inox
Disque : inox
Filtre : inox
Raccordement : taraudé gaz
Body: C22.8 (A 105)
Bonnet: C22.8 (A 105)
Gasket: graphite
Seat: stainless steel
Disc : stainless steel
Strainer: stainless steel
Ends: female threaded - BSP
959595
P : 22 barT : 250°C
P max. : 32 bar
T max. : 300°C
96105115
1.81.71.6
1/2"3/4"1"
RéférenceReference
MatériauxMaterials
Conditions de servicePressure
Temperature
PTH5250 Purgeur thermostatique et éliminateur d'air Thermostatic steam trap and air eliminatorCorps : C22.8 (A 105)
Chapeau : C22.8 (A 105)
Joint : graphite
Siège : inox
Disque : inox
Filtre : inox
Raccordement : à bride PN25
Body: C22.8 (A 105)
Bonnet: C22.8 (A 105)
Gasket: graphite
Seat: stainless steel
Disc: stainless steel
Strainer: stainless steel
Ends: flanged - PN25
150150160
P : 22 barT : 250°C
P max. : 32 bar
T max. : 300°C
96105115
3.44.14.5
152025
525252
525252
B
mm
PTH1140 Purgeur thermostatique et éliminateur d'air Thermostatic steam trap and air eliminatorCorps : bronze
Chapeau : bronze
Joint : graphite
Siège : inox
Disque : inox
Ressort : inox
Raccordement : taraudé gaz
Body: brass
Bonnet: brass
Gasket: graphite
Seat: stainless steel
Disc: stainless steel
Spring: stainless steel
Ends: female threaded - BSP
64P : 13 barT : 200°C
P max. : 16 bar
T max. : 260°C
60 0.5 1/2"
PTH6150 Purgeur thermostatique et éliminateur d'airThermodynamic steam trap and air eliminatorCorps : inox
Chapeau : inox
Disque : inox
Filtre : inox
Raccordement : taraudé gaz
Body: stainless steel
Bonnet: stainless steel
Disque: stainless steel
Strainer screen: stainless steel
Ends: female threaded - BSP
65656565
P : 22 barT : 250°C
P max. : 32 bar
T max. : 385°C
44444444
0.500.450.470.40
3/8"1/2"3/4"1"
28
H
L
B
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:53 Page116
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
117
H
L
B
Robinetterie pour vapeur Steam valves
DNPoids
Weight
mm
L
mm kg
H
PCV6150 Casse vide / Vacuum breakerCorps : AISI 304
Chapeau : AISI 304
Bille : inox
Raccordement : taraudé gaz
Body: AISI 304
Bonnet: AISI 304
Ball: stainless steel
Ends: female threaded - BSP
32P : 21 barT : 250°C
52 0.17 1/2"
RéférenceReference
MatériauxMaterials
Conditions de servicePressure
Temperature
26
PU3103 Purgeur d'air sur circuit d’eau / Air eliminators for water systemCorps : fonte
Chapeau : fonte
Flotteur : inox
Raccordement : taraudé gaz
Variante : modèle tout inox
Body: cast iron
Bonnet: cast iron
Ball: stainless steel
Ends: female threaded - BSP
Option: stainless steel type
108108
P : 14 barT : 200°C
P max. : 16 bar
T max. : 250°C
160160
44
1/2"3/4"
PU4120 Eliminateur d’air sur circuit d’eau / Compressed air ball float trapCorps : GGG 40
Chapeau : GGG 40
Joint : sans amiante
Siège : AISI 410
Flotteur : AISI 304
Raccordement : taraudé gaz
Body: GGG 40
Bonnet: GGG 40
Gasket: non asbestos
Seat: AISI 410
Float: AISI 304
Ends: female threaded - BSP
122122
P : 14 barT : 198°C
P max. : 16 bar
T max. : 250°C
150150
3.53.5
1/2"3/4"
6868
SEP5240 Séparateur / SeparatorCorps : acier
Raccordement :à bride PN16
Marquage CE
Option : ANSI CL.150 - DIN PN25ANSI CL. 300 - DIN PN40
Body: carbon steel
Ends: flanged - PN16
CE marked
Option: ANSI CL.150 - DIN PN25ANSI CL. 300 - DIN PN40
230230230260260310380400485555585660
DIN PN16P : 16 barT : 120°C
P : 14 barT : 198°C
P : 13 barT : 250°C
26026030039543550555061071584510501170
4.34.45.38.29.215.1
------
1520253240506580100125150200
200195215305395410450525615780880
-
114114114140140168219219273324356406
B
mm
C
mm
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:53 Page117
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
118
Robinetterie pour vapeur Steam valves
DNPoids
Weight
mm
L
mm kg
HMatériauxMaterials
Conditions de servicePressure
Temperature
CD2140 Contrôleur de circulation double glace bronzeDouble window sight glass - bronze bodyCorps : bronze
Ecrou : bronze
Joint : caf
Glace : verre trempé
Raccordement : taraudé gaz
Body: bronze
Glass nut: bronze
Gasket: caf
Windows: trempered glass
Ends: female threaded - BSP
107103113117125135170180
P : 12 barT : 150°C
1.331.321.461.672.472.804.976.50
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
CD3242 Contrôleur de circulation double glace fonteDouble window sight glass - cast iron bodyCorps : GG25
Ecrou : GG25
Joint : caf
Glace : verre trempé
Raccordement : à brides PN10
Body: GG25
Glass nut: GG25
Gasket: caf
Windows: trempered glass
Ends: flanged - PN10
200230
P : 12 barT : 150°C
150165
6.59.0
4050
CD 6140 Contrôleur de circulation double glace inoxDouble window sight glass - stainless steel bodyCorps : inox 304
Ecrou : inox
Joint : caf
Glace : borosilicate
Raccordement : taraudé gaz
Body: stainless steel 304
Glass nut: stainless steel
Gasket: caf
Windows: borosilicate glass
Ends: female threaded - BSP
103103100
P : 16 barT : 300°C
808090
1.31.31.9
1/2"3/4"1"
CD 6240 Contrôleur de circulation double glace inoxDouble window sight glass - stainless steel bodyCorps : AISI 304
Ecrou : inox
Joint : caf
Glace : borosilicate
Raccordement : à brides PN10
Body: AISI 304
Glass nut: stainless steel
Gasket: caf
Windows: borosilicate glass
Ends: flanged - PN10
130130130
P : 16 barT : 300°C
808090
2.43.44.5
152025
B
mm
CD1110 Contrôleur de circulation simple glace / Single window sight glassCorps : laiton
Ecrou : laiton
Joint : sans amiante
Glace : borosilicate
Raccordement : taraudé gaz
Body: brass
Glass nut: brass
Gasket: non asbestos
Windows: borosilicate glass
Ends: female threaded -BSP
808888
P : 12 barT : 150°C
506060
0.600.900.85
1/2"3/4"1"
162020
H
L
B
RéférenceReference
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:53 Page118
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
119
Robinetterie pour vapeur Steam valves
DNPoids
Weight
mm
L
mm kg
HMatériauxMaterials
Conditions de servicePressure
Temperature
DPV 6180 Réducteur de pression inox PN40 Pressure reducing valve - stainless steel - PN40Corps : inox
Chapeau : inox
Siège : inox
Filtre : inox
Raccordement : taraudé gaz ou NPT
Ressort : 0.14 - 1.7 bar 1.4 - 4.0 bar3.5 - 8.6 bar
Option : PN40
Body: stainless steel
Cover: stainless steel
Seat: stainless steel
Stainer: stainless steel
Ends: female threaded - BSP or NPT
Spring: 0.14 - 1.7 bar 1.4 - 4.0 bar3.5 - 8.6 bar
808090
P : 40 bar(air)
P : 25 bar(vapeur / steam)
T : 260°C
Pression sortieDown stream
pressureMaxi : 20 bar
Mini : 0.35 bar
Kvs 1.15 m3/h
175175180
3.23.23.7
1/2"3/4"1"
676780
DPV 6280 Réducteur de pression inox PN100 Pressure reducing valve - stainless steel - PN100Corps : inox
Chapeau : inox
Siège : inox
Filtre : inox
Raccordement : à brides PN40
Ressort : 0.14 - 1.7 bar 1.4 - 4.0 bar3.5 - 8.6 bar
Option : PN40
Body: stainless steel
Cover: stainless steel
Seat: stainless steel
Stainer: stainless steel
Ends: flanged PN40
Spring: 0.14 - 1.7 bar 1.4 - 4.0 bar 3.5 - 8.6 bar
130150160
P : 40 bar(air)
P : 25 bar(vapeur / steam)
T : 260°C
Pression sortieDown stream
pressureMaxi : 20 bar
Mini : 0.35 bar
Kvs 1.15 m3/h
175175180
4.65.26
1/2"3/4"1"
42.552.557.5
DPV 5250 Réducteur de pression piloté PN25 Pilote operated pressure reducing valve - PN25Corps : C 22.8
Chapeau : CK 45
Siège : inox
Filtre : inox
Raccordement :à brides PN25
Ressort : 0.35 - 2 bar 1.5 - 5.5 bar3.5 - 8.5 bar7 - 17 bar
Body: C 22.8
Cover: CK 45
Seat: stainless steel
Stainer: stainless steel
Ends: flanged PN25
Spring: 0.35 - 2 bar1.5 - 5.5 bar3.5 - 8.5 bar 7 - 17 bar
150150160180200230
P : 25 bar(air)
P : 21 bar(vapeur / steam)
T : –10/260°C
Pression sortieDown stream
pressureMaxi : 17 bar
Mini : 0.35 bar
Kvs 1.15 m3/h
252264264276284300
1313.514182331
152025324050
565656687584
B
mm
DPV 4140 Réducteur de pression fonte GS PN25 / Pressure reducing valve - ductile iron - PN25Corps : GGG 40.3
Chapeau : GGG 40.3
Siège : inox
Filtre : inox
Raccordement : taraudé gaz ou NPT
Ressort : 0.14 - 1.7 bar 1.4 -4.0 bar 3.5 - 8.6 bar
Body: GGG 40.3
Cover: GGG 40.3
Seat: stainless steel
Stainer: stainless steel
Ends: female threaded - BSP or NPT
Spring: 0.14 - 1.7 bar1.4 - 4.0 bar 3.5 - 8.6 bar
100100110
P : 17 barT : 210°C
Pression sortieDown stream
pressureMaxi : 8.6 barMini : 0.14 bar
Kvs m3/h : 1.5 (1/2") 2.5 (3/4") 3.0 (1")
152152152
2.22.22.4
1/2"3/4"1"
555555
H
LB
RéférenceReference
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:53 Page119
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:53 Page120
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:53 Page121
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
122
Vannes à passage direct, robinets à soupape, clapets...Gate valves, globe valves, check valves
Robinetterie pétrole forgée moulée
Forged and cast valvesfor petroleum
Consultez notre catalogue «Robinetterie pétrole»
Consult our «Petroleum valves» catalog
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page122
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page123
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
124
Raccords, robinetterie inox pour l'alimentaire
Fittings and valves forthe food industries
Raccords CLAMP / CLAMP unions- Raccords complets avec joints EPDM / Complete CLAMP with EPDM gasket- Colliers / Heavy duty CLAMP- Ferrules / Welding ferrule- Bouchons / Solid end caps- Joints / Gaskets- Ferrules cannelées / Shanked ferrules
Raccords SMS - DIN - MACON / SMS - DIN - MACON unions- Raccords complets / SMS unions- Bouchons chaînettes / Blind nut with chain- Fonds d'écrous / Liner blanks- Ecrous / Nuts- Nez à souder / Weld male- Douilles à souder / Liner to weld- Adaptateurs cannelés / Hose shank to weld- Coudes 90° - 45° - 180° / Welding bend 90° - 45° - 180°- Réductions / Reducers- Croix égales / Welding crosses- Tés / Welding tees- Colliers hexagonaux / Hexagonal pipe holders- Tubes / Pipes
Raccords sphériques / Spherical unions- Femelles à levier / Female with lever to weld- Sphères mâles / Male sphere to weld- Bouchons à levier / Plug with lever- Joints toriques / Sealing rings
Robinetterie / Valves- Vannes papillon / Butterfly valves- Filtres / Strainers- Indicateurs de circulation / Sight glass- Clapets anti-retour / Check valves
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page124
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page125
Motorisation Électrovannes
ActuatorSolenoïd valves
MatériauxMaterials
DNPoids
Weight
mm
L
gkmm
HConditions de servicePressure
Temperature
RéférenceReference
EV 1140 Électrovanne laiton NF à membrane assistée (normalement fermée)Solenoid valve NC with assisted diaphragm (normally closed)
Corps : laiton
Etanchéité : NBR
Raccordement : taraudégaz
Pression différentielle mini : 0,3 bar
Tension : alternatif (12 - 24 - 48 - 110 - 230 - 400 V) / continu (12 - 24 - 48 - 110 V)
Sur demande : membrane EPDM ou FPM
Body: brass
Tight: NBR
Ends: female threaded - BSP
Mini differential pressure: 0.3 bar
Voltage: alternativecurrent (12 - 24 - 48 - 110 -230 - 400 V) / direct current(12 - 24 - 48 - 110 V)
On request: EPDM or FPMdiaphragm
616187100131146174245250
P : 10 barT :
90°C (NBR )130°C (EPDM)150°C (FPM)
777784869598108134139
0.540.500.801.102.503.004.609.4011.23
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"
EV 1143 Électrovanne laiton NF (normalement fermée)Solenoid valve NC (normally closed)
Corps : laiton
Etanchéité : NBR
Raccordement : taraudégaz
Pression différentielle mini : 0,1 bar
Tension : alternatif (12 - 24 - 48 - 110 - 230 - 400 V) / continu (12 - 24 - 48 - 110 V)
Sur demande : membrane EPDM
Body: brass
Tight: NBR
Ends: female threaded - BSP
Mini differential pressure: 0.1 bar
Voltage: alternativecurrent (12 - 24 - 48 - 110 -230 - 400 V) / direct current(12 - 24 - 48 - 110 V)
On request: EPDM diaphragm
6972100104145145173
≤ 1"P : 20 bar
> 1"P : 10 bar
T :90°C (NBR )
140°C (EPDM)
99.5101.5107
112.5134134148
3/8"1/2"3/4"1"
1"1/41"1/2
2"
EV 1144 Électrovanne laiton NO (normalement ouverte)Solenoid valve NO (normally open)
Corps : laiton
Etanchéité : NBR
Raccordement : taraudégaz
Pression différentielle mini : 0,1 bar
Tension : alternatif (12 - 24 - 48 - 110 - 230 - 400 V) / continu (12 - 24 - 48 - 110 V)
Sur demande : membrane EPDM
Body: brass
Tight: NBR
Ends: female threaded - BSP
Mini differential pressure: 0.1 bar
Voltage: alternativecurrent (12 - 24 - 48 - 110 -230 - 400 V) / direct current(12 - 24 - 48 - 110 V)
On request: EPDM diaphragm
6972100104145145173
≤ 1"P : 20 bar
> 1"P : 10 bar
T :90°C (NBR )
140°C (EPDM)
99.5101.5107
112.5134134148
3/8"1/2"3/4"1"
1"1/41"1/2
2"
EV 1141 Électrovanne laiton NO à membrane assistée (normalement ouverte)Solenoid valve NO with assisted diaphragm (normally open)
Corps : laiton
Etanchéité : NBR
Raccordement : taraudégaz
Pression différentielle mini : 0,3 bar
Tension : alternatif (12 - 24 - 48 - 110 - 230 - 400 V) / continu (12 - 24 - 48 - 110 V)
Sur demande : membrane EPDM ou FPM
Body: brass
Tight: NBR
Ends: female threaded - BSP
Mini differential pressure: 0.3 bar
Voltage: alternativecurrent (12 - 24 - 48 - 110 -230 - 400 V) / direct current(12 - 24 - 48 - 110 V)
On request: EPDM or FPMdiaphragm
616187100131146174245250
P : 10 barT :
90°C (NBR )130°C (EPDM)150°C (FPM)
83839193101105114140145
0.600.550.851.102.703.004.509.5011.23
3/8"1/2"3/4"1"
1"1/41"1/2
2"2"1/2
3"
H
L
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
126
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page126
Motorisation Électrovannes
ActuatorSolenoïd valves
MatériauxMaterials
DNPoids
Weight
mm
L
gkmm
HConditions de servicePressure
Temperature
RéférenceReference
EV 6100 Électrovanne NF inox (normalement fermée)Stainless steel solenoid valve NC (normally closed)
Corps : inox
Etanchéité : FPM
Raccordement : taraudégaz
Pression différentielle mini : 0,5 bar
Tension : alternatif (24 - 230 V) / continu (24 V)
Sur demande : membrane NBR
Body: stainless steel
Tight: FPM
Ends: female threaded - BSP
Mini differential pressure:0.5 bar
Voltage: alternative (24 - 230 V)/direct current (24 V)
On request: NBR diaphragm
66.566.59696131131174
P : 10 barT :
90°C (NBR)150°C (FPM)
106.5106.5126126
145.5145.5145
0.7400.7251.4301.4302.5602.3203.440
3/8"1/2"3/4"1"
1"1/41"1/2
2"
EV 1145 Électrovanne spéciale vapeur NF (normalement fermée)Special steam solenoid valve NC (normally closed)
Corps : laiton
Etanchéité : PTFE
Raccordement : taraudégaz
Pression différentielle mini : 1 bar
Tension : alternatif (12 - 24 - 48 - 110 - 230 - 400 V) / continu (12 - 24 - 48 - 110 V)
Body: brass
Tight: PTFE
Ends: female threaded - BSP
Mini differential pressure: 1 bar
Voltage: alternativecurrent (12 - 24 - 48 - 110 -230 - 400 V) / direct current(12 - 24 - 48 - 110 V)
5656100100146146174
P : 10 barT :
180°C (PTFE)
8181116119154154184
0.470.501.451.484.504.307.20
3/8"1/2"3/4"1"
1"1/41"1/2
2"
EV 1110 Électrovanne laiton NF (normalement fermée)Solenoid valve NC (normally closed)
Corps : laiton
Etanchéité : NBR
Raccordement : taraudégaz
Pression différentielle mini : 0 bar
Tension : alternatif (12 - 24 - 48 - 110 - 230 - 400 V) / continu (12 - 24 - 48 - 110 V)
Sur demande : membrane EPDM ou FPM
Body: brass
Tight: NBR
Ends: female threaded - BSP
Mini differential pressure: 0 bar
Voltage: alternativecurrent (12 - 24 - 48 - 110 -230 - 400 V) / direct current(12 - 24 - 48 - 110 V)
On request: EPDM or FPMdiaphragm
6161100100146146174
P : 10 barT :
90°C (NBR )130°C (EPDM)150°C (FPM)
105105110116200200216
0.680.661.101.205.205.006.50
3/8"1/2"3/4"1"
1"1/41"1/2
2"
EV 1142 Électrovanne laiton NF «gasoil» (normalement fermée)Solenoid valve NC «gasoil» (normally closed)
Corps : laiton
Etanchéité : FPM
Raccordement : taraudégaz
Pression différentielle mini : 0,3 bar
Tension : alternatif (12 - 24 - 48 - 110 - 230 - 400 V) / continu (12 - 24 - 48 - 110 V)
Sur demande : membrane EPDM ou FPM
424756
P : 15 barT :
130°C (EPDM)150°C (FPM)
697376
0.3500.3800.435
1/4"3/8"1/2"
Body: brass
Tight: FPM
Ends: female threaded - BSP
Mini differential pressure: 0.3 bar
Voltage: alternativecurrent (12 - 24 - 48 - 110 -230 - 400 V) / direct current(12 - 24 - 48 - 110 V)
On request: EPDM or FPMdiaphragm
H
L
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
127
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page127
MatériauxMaterials
DNPoids
Weight
mm
L
gkmm
HConditions de servicePressure
Temperature
RéférenceReference
EV 1146 Électrovanne laiton NF - Bürkert / Solenoid valve NC - BürkertCorps : laiton
Etanchéité : NBR
Raccordement : taraudégaz
Sur demande : corps inox, étanchéité FPM
Body: brass
Tightness: NBR
Ends: female threaded - BSP
On request: s/steel body, FPM tightness
5058809595132132
P : 10 barT :
90°C (NBR)100°C (FPM)
68.580
95.5138138
149.5149.5
0.400.551.001.701.703.603.60
3/8"1/2"3/4"1"
1"1/41"1/2
2"
EV 7140 Électrovanne Delrin NF / Solenoid valve Delrin NCCorps : Delrin
Etanchéité : NBR, EPDM, FPM
Raccordement : taraudégaz
Pression différentielle mini : 0,5 bar
Tension : alternatif (24 - 48 - 110 - 230 V) / continu (12 - 24 - 48 V)
Sur demande : capot anti-déflagration
Body: POM
Tightness: NBR, EPDM, FPM
Ends: female threaded - BSP
Mini differential pressure:0.5 bar
Voltage: alternative (24 - 48 - 110 - 230 V) / directcurrent (12 - 24 - 48 V)
On request: explosion proof enclosure
72.572.572.5104104140140
P : 10 barT :
60°C (NBR)100°C (EPDM)100°C (FPM)
8888889797106106
0.2900.2900.2900.5250.5250.6500.650
1/4"3/8"1/2"3/4"1"
1"1/41"1/2
EV 2140 Vanne pneumatique NF (normalement fermée)Pneumatic valve NC (normally closed)
Corps : bronze
Clapet : inox
Etanchéité : PTFE
Raccordement : taraudégaz
Option : corps inox, commande manuelle desecours, limiteur de couple, boîtier 2 CFC
Sur demande :construction tout inox, raccordement à brides, à souder
Body: bronze
Disc: stainless steel
Tight: PTFE
Ends: female threaded - BSP
Option: s/steel body, emergency handle, torque limit switches, limit switches box
On request: s/steel construction, flanged ends,welding ends
65657590110120150
P : 16 barT : 180°C
121121147176180235240
1.01.01.21.62.03.74.4
3/8"1/2"3/4"1"
1"1/41"1/2
2"
EV 2141 Vanne pneumatique NO (normalement ouverte)Pneumatic valve NO (normally open)
Corps : bronze
Clapet : inox
Etanchéité : PTFE
Raccordement : taraudégaz
Option : corps inox, commande manuelle desecours, limiteur de couple, boîtier 2 CFC
Sur demande : construction tout inox, raccordement à brides, à souder
Body: bronze
Disc: stainless steel
Tight: PTFE
Ends: female threaded - BSP
Option: s/steel body, emergency handle, torque limit switches, limit switches box
On request: s/steel construction, flanged ends,welding ends
65657590110120150
P : 16 barT : 180°C
121121147176180235240
1.01.01.21.62.03.74.4
3/8"1/2"3/4"1"
1"1/41"1/2
2"
Motorisation Électrovannes
ActuatorSolenoïd valves H
L
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
128
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page128
Choix du modèle suivant la température ambianteChoice of the model following the ambient temperature
Motorisation Électrovannes
ActuatorSolenoïd valves
Préconisation de protection du servomoteurRecommended actuator protection
Lieu d’installationSite of installation
Moteur électrique / Electric actuator
Préconisation de protection du servomoteurRecommended actuator protection
Lieu d’installationSite of installation
A l’intérieur d’un bâtimentInside a building
Etanche IP65 ou NEMA 4Weatherproof IP65or NEMA 4
Résistance anti-condensationAnti-condensation heaterEnvironnement / Environment
Type de fonctionnement de l’organe à entraîner / Type of operation of the device to be driven
A l’extérieur sous abri Outdoors under shelter
Etanche IP65 + ou NEMA 4Weatherproof IP65 +or NEMA 4
Etanche IP66 ou NEMA 4X + protection off-shore + Watertight IP66 or NEMA 4X + off-shore protection +
Etanche IP66 ou NEMA 4X+ protection marine + Watertight IP66 or NEMA 4X+ marine protection +
A l’air libreOutdoors
Avec risque d’immersion temporaire (moins de 30 mn)Risk of temporary submersion (less than 30 mn and less than 1 m deep)
Etanche IP67 + époxy + ou NEMA 4Watertight IP67 + epoxy +or NEMA 4
Etanche IP67 ou NEMA 6+ peinture spéciale + Watertight IP67 or NEMA 6+ special paint +
Avec risque d’immersion temporaire(temps à définir)Risk of temporary submersion (time lapse and depth to be defined)
Etanche IP68 ou NEMA 6P + peinture spéciale + Watertight IP68 or NEMA 6P + special paint +
En ambiance corrosive(chimie, alumine...)Corrosive environment
NucléaireNuclear
En merOff-shore
En bord de merOn-shore
SpécialeSpecial
Servomoteur qualifiésuivant RCCEActuator qualificationaccording to RCCE
En ambiance avec risque d’explosionHazardous areas
AntidéflagranteATEX ou NEMAExplosionproofATEX or NEMA
Fonctionnement du servomoteurActuator function
Type de fonctionnementType of operation
Fonctionnement du servomoteurActuator function
Type de fonctionnementType of operation
Ouvrir ou fermer sur toute la course,en moyenne 20 à 30 fois par jourOpen or close the full stroke,on average 20 to 30 times/day
Tout ou rienOn-off
Atteindre des positions intermédiaires, avec une précision suffisante (mieux que 2%), en moyenne 360 fois par jourSelect intermediate positions, with good precision (better than 2%), on average 360 times/day
Régulation Classe IIIModulating Class III
Atteindre des positions intermédiaires,avec une bonne précision (mieux que1%), en permanence toutes les 2 à 3 secondesSelect intermediate positions, with high precision (better than 1%), on apermanent basis every 2 or 3 seconds
Régulation Classe IIModulating Class II
Réaliser un positionnement rapide,avec une précision supérieure à 0,5%,avec un changement de position enpermanenceFast positioning, with excellent precision (0.5% or better), and continuous movement
Régulation Classe IModulating Class I
10 90
20 80
30 70
40 6050
10 9015 85
20 8025 7530 70
35 6540 60
45 5550
Options
Contacts spéciaux- Double pôle - Etanche - Sous azote- Tandem
Special contacts- DPDT - Waterproof - Encapsulated - Tandem
Version ADF- EEx ed - EEx d
Explosionproof- EEx ed - EEx d
Prises multibroches- Puissance - Contrôle
Multipin plugs- Power - Control
Version nucléaireNuclear version
Recopie à distance- Potentiomètre - Transmetteur 4-20 mA- Transmetteur inductif
Remote indication- Potentiometer - 4-20 mA transmitter- Contactless transmitter
Version intégral +Integral + version
Résistance de chauffage24 V - 110 V - 220 V - 380 V - 415 V
Heating resistor24 V - 110 V - 220 V - 380 V - 415 V
Positionneur 4-20 mA incorporé- Classe III - Classe II - Classe I
Incorporated positioner 4-20 mA- Class III - Class II - Class I
Version standard– 20°C / + 70°CStandard version
Version haute température+ 0°C / + 90°CHigh temperature version
Version basse température– 40°C / + 50°CLow temperature version
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
129
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page129
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page130
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page131
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
132
Brides
EN 1092-1Flanges
Types de brides / Flanges types
Types de portées de joints / Faces types
C1
B1
F
d1
B1
B2
E
C1
Ed
1 B2
C1
E
F
C1
d1
N1
B3A
S
H3H2
G m
ax.
C4
R1
C2
H2
H3
AS
N1
R1
C2
H1
B1
N2
R1
C2
H1
N2
A
C3
R1
N3
N3
Type 01
C
Type face de joint plate
flat face
A
Cf1
d1
Type face surélevée
(B1 et B2)raised face(B1 and B2)
B
W
X
C f2
f2
Type emboîtement double mâle
tongue-groove facing (male)
C
Y Z
Cf1
d1
f3
Type emboîtement
double femelletongue-groove facing (female)
D
X
Cf2
Type emboîtement
mâlemale facing
E
d1
Y
Cf1
f3
Type emboîtement
femellefemale facing
F
Wd
1
Cf1
f2
Type emboîtement femelle
pour joint toriquefemale facing
for o-ring
G
Y Z
Cf4
f3
R
α
Type emboîtement mâle pour joint torique
male facing for o-ring
H
Type
Type (sur collet / on collar)
33
02
Type 05 Type 11 Type 12 Type 13 Type 21
L
K
D
Type
Type (sur collet / on collar)
32
02 Type
Type (sur collet / on collar)
34
04
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page132
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
133
Brides
EN 1092-1Flanges
A B1 B2 C1 C2 C4 E F Gmax. H1 H2 H3 N1 N2 N3 R1 S
11-21*34
Types de brides / Flanges typesBoulonsBoltsDN
3403954455055656156707808951015111512301455167519152115232525502760296031803405
295350400460515565620725840950105011601380159018202020223024402650285030703290
22222222262626303033333639424848485656565662
8 x M 2012 x M 2012 x M 2016 x M 2016 x M 2420 x M 2420 x M 2420 x M 2724 x M 2724 x M 3028 x M 3028 x M 3332 x M 3636 x M 3940 x M 4544 x M 4548 x M 4552 x M 5256 x M 5260 x M 5264 x M 5268 x M 56
219.1273
323.9355.6406.445750861071181391410161219142216261829203222352438262028203020
221.5276.5327.5359.5411462
513.5616.5
--------------
226281333365416467519622
--------------
2426262832363842--------------
24262626262828283032343438424650545862667075
24262626262828343842465260---------
68888888--------------
2022222224242626--------------
1902352853303804254755756707708609601160
---------
4446465357636775--------------
626868687272758080909595115120130140150160170180190200
16161616161616181818202025252530303535404045
23429234238544048854264274685095010521256146016661868207222752478268028823085
246298350400456502559658
--------------
246298348408456502559658772876976108012921496171219102120
-----
10121212121212121212121616161616161818181818
6.36.37.17.17.17.17.17.188101011121415161820222224
Dimensions de raccordementConnectiondimensions
D K L01-12
32 02
B3
240294348400450498550650
--------------
04 01-0204
11-1213
C3
2426262626282834343638384448525660-----
21 05 02-04 32-34 05 12-13 11-34 11-34 11-34 12-13 21 11-1213-21 11-34
* Pour les brides de type 21, le diamètre extérieur de la collerette correspond approximativement au diamètre extérieur du tube.For the flange of type 21, the outside diameter of the collar correspond approximately to the outside diameter of the tube.
Utiliser les dimensions PN 40 / Use the dimensions of PN 40Utiliser les dimensions PN 16 / Use the dimensions of PN 16
10 à 4050 à 150
20025030035040045050060070080090010001200140016001800200022002400260028003000
A B1 B2 C1 C2 - C3 C4 E F G max. H1 H2 H3 N1 N2 N3 R1 S
1121*
Types de brides / Flanges typesBoulonsBoltsDN
10152025324050658010012515020025030035040045050060070080090010001200140016001800200022002400260028003000320034003600
Types de brides / Flanges types: - - - - - - - - 322113121105040201PN 6
758090
1O0120130140160190210240265320375440490540595645755860975107511751405163018302045226524752685290531153315352537353970
5055657590100110130150170200225280335395445495550600705810920102011201340156017601970218023902600281030203220343036403860
11111111141414141818181818182222222222262630303033363639424242484846484856
4 x M 104 x M 104 x M 104 x M 104 x M 124 x M 124 x M 124 x M 124 x M 164 x M 168 x M 168 x M 168 x M 1612 x M 1612 x M 2012 x M 2016 x M 2016 x M 2020 x M 2020 x M 2424 x M 2424 x M 2724 x M 2728 x M 2732 x M 3036 x M 3340 x M 3344 x M 3648 x M 3952 x M 3956 x M 3960 x M 4564 x M 4568 x M 4572 x M 4576 x M 4580 x M 52
17.221.326.933.742.448.360.376.188.9114.3139.7168.3219.1273
323.9355.6406.445750861071181391410161219142216261829203222352438262028203020322034203620
1822
27.534.543.549.561.577.590.5116.0141.5170.5221.5276.5327.5359.5411.0462 0513.5616.5
-----------------
212531384653658194120145174226281333365416467519622
-----------------
1212141416161616181820202224242628303032-----------------
12121414141414141616181820222222222224302424262628323436384244464850545660
1212141414141414161618182022222222242430404448526068768492--------
33445556666668888888-----------------
1010101010101212121414141618181820202222-----------------
-------
55709011514019023528533038042547557567077086096011601346154617461950
--------
202024242626283234404444444444-- ------ --------------
283032353538383842454848556062626565687070707070909090100110115125130135140150160165
666667891010101215151515151515161616161620202020252525253030303535
263038425562748810213015518423629034238543849253864074084294210451248145216551855205822602462266528653068327234753678
25304050607080100110130160185240295355
---------- ---------- --
2026344454647494110130160182238284342392442494544642746850950105012641480168018782082
--------
444466668881010121212121212121212121616161616161818181818202020
1.82
2.32.62.62.62.92.93.23.64
4.56.36.37.17.17.17.17.17.17.17.17.17.188910111213141516161818
Dimensions de raccordementConnectiondimensions
D K L01 -12
32 02 01-02 11-1213-21 05 02 32 05 12-13 11 11 11 12-13 21 11-12
13-21 11
Dimensions en mm / Dimensions in mm.
Types de brides / Flanges types: - - - - - - - - - 34322113121105040201PN 10Dimensions en mm / Dimensions in mm.
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page133
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
134
Brides
EN 1092-1Flanges
A B1 B2 C1 C2 C4 E F Gmax. H1 H2 H3 N1 N2 N3 R1 S
11-21*34
Types de brides / Flanges typesBoulonsBoltsDN
36042548555562067073084596010851185132015301755197521952425
3103704304905506006607708759901090121014201640186020702300
2630303336363639424848565662627070
12 x M 2412 x M 2716 x M 2716 x M 3016 x M 3320 x M 3320 x M 3320 x M 3624 x M 3924 x M 4528 x M 4528 x M 5232 x M 5236 x M 5640 x M 5644 x M 6448 x M 64
219.1273
323.9355.6406.4457508610711813914101612191422162618292032
221.5276.5327.5359.5411462
513.5616.5
---------
226281333365416467519622
---------
3235384246505668---------
303234384046485846505458-----
3032343840464858---------
68888888---------
2626283234363840---------
190235285332380425475575
---------
52606772788490100
---------
808892100110110125125125135145155
-----
161818202020202020222424-----
2442983523984525005586607608649681070
-----
256310364418472520580684
---------
252304364418472520580684780882982108612961508172619202150
1012121212121212121212161818202020
6.37.188
8.88.81011
12.514.216
17.5-----
Dimensions de raccordementConnectiondimensions
D K L01-12
32 02
B3
250302356408462510568670
---------
04 01-0204
11-1213
C3
3032343840464858505458627076849096
21 05 02-04 32-34 05 12-13 11-34 11-34 11-34 12-13 21 11-1213-21 11-34
Utiliser les dimensions PN 40 / Use the dimensions of PN 4010 à 150200250300350400450500600700800900100012001400160018002000
A B1 B2 C1 C2 C4 E F Gmax. H1 H2 H3 N1 N2 N3 R1 S
11-21*34
Types de brides / Flanges typesBoulonsBoltsDN
16518520022025028534040546052058064071584091010251115125514851685193021302345
1251451601802102402953554104705255856507708409501050117013901590182020202230
1818181818222226262630303336363939424848565662
4 x M 168** x M 168 x M 168 x M 168 x M 168 x M 2012 x M2012 x M 2412 x M 2416 x M 2416 x M 2720 x M 2720 x M 3020 x M 3324 x M 3324 x M 3628 x M 3628 x M 3932 x M 4536 x M 4540 x M 5244 x M 5248 x M 56
60.376.188.9114.3139.7168.3219.1273
323.9355.6406.4457508610711813914101612191422162618292032
61.577.590.5116
141.5170.5221.5276.5327.5359411462
513.5616.5
---------
658194120145174226281333365416467510622
---------
1920202222242629323538424652---------
1818202022222426283032404454363840424852586266
18182020222224262830324044544852586476----
56666668888888---------
1616161818202022242628303232---------
-55709011514019023528533038042547557567077086096011601346154617461950
2832344044444446465763687383839094100
-----
4545505255556270788285879095100105110120130145160170180
810101212121616161616161618182020223030353540
7492105131156184235292344390445490548652755855955105812621465166818702072
841041181401681952462983504004565025596587608649681072
-----
84104120140170190246296350410458516576690760862962107612821482169618962100
56688101012121212121212121212161616161616
2.92.93.23.64
4.56.36.37.18888
8.88.8101010
12.514.216
17.520
Dimensions de raccordementConnectiondimensions
D K L01-12
32 02
B3
7796108134162188240294348400454500556660
---------
04 01-0204
11-1213
C3
1818202022222426283032404454424244465258646870
21 05 02-04 32-34 05 12-13 11-34 11-34 11-34 12-13 21 11-1213-21 11-34
** Conformément à EN 1092-2 (brides en fonte) et EN 1092-3 (brides en alliages de cuivre), les brides de ce DN et ce PN peuvent être fournies avec 4 trous.Lorsque les brides en acier nécessitent 4 trous, celles-ci peuvent être réalisées après accord entre le fabricant et l'acheteur.
According to EN 1092-2 (flanges in cast iron) and EN 1092-3 (flanges in brass alloys), the flanges of this DN and PN can be supplied with 4 holes. When the steel flanges require 4 holes, these can berealized after agreement between the manufacturer and the buyer.
Utiliser les dimensions PN 40 / Use the dimensions of PN 4010 à 40506580100125150200250300350400450500600700800900100012001400160018002000
Types de brides / Flanges types: - - - - - - - - - 34322113121105040201PN 16Dimensions en mm / Dimensions in mm.
Types de brides / Flanges types: - - - - - - - - - 34322113121105040201PN 25Dimensions en mm / Dimensions in mm.
* Pour les brides de type 21, le diamètre extérieur de la collerette correspond approximativement au diamètre extérieur du tube.For the flange of type 21, the outside diameter of the collar correspond approximately to the outside diameter of the tube.
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page134
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
135
Brides
EN 1092-1Flanges
A B1 C1 C2 C4 Gmax. H1 H2 H3 N1 N2 N3 R1
11-21*
Types de brides / Flanges typesBoulonsBoltsDN
18020521525029534541547053060067080093010451165128514151665
1351601702002402803454004605255857058209351050117012901530
222222263033363636394248565662627078
4 x M 208 x M 208 x M 208 x M 248 x M 278 x M 3012 x M 3312 x M 3316 x M 3316 x M 3616 x M 3920 x M 4520 x M 5224 x M 5224 x M 5628 x M 5628 x M 64
32 x M 72 x 6
60.376.188.9114.3139.7168.3219.1273
323.9355.6406.4
-------
61.577.590.5116
141.5170.5221.5276.5327.5359.5411
-------
2626303234364654627278-------
2626283034364246525660-------
2626283034364246525660-------
-456080105130180220270310360
-------
364044525660------------
626872788895110125140150160
-------
1012121212121618182020-------
8298112138168202256316372420475
-------
90112125152185215
------------
90105122146177204264320378434490602714826938104811621390
6688810101212121212151518181818
Dimensions de raccordementConnectiondimensions
D K L 01-12 01 11-1213
C3
26262830343642465256606876849298108126
21 05 05 12-13 11 11 11 12-13 21 11-1213-21
S
2.93.23.64.04.55.67.18.811
12.514.2
-------
11
101520 25324050658010012515020025030035040050060070080090010001200
Utiliser les dimensions PN 100 / Use dimensions of PN 100
A B1 B2 C1 C2 C4 E F Gmax. H1 H2 H3 N1 N2 N3 R1 S
11-21*34
Types de brides / Flanges typesBoulonsBoltsDN
9095105115140150165185200235270300375450515580660685755890
60657585100110125145160190220250320385450510585610670795
1414141418181818182226263033333639394248
4 x M 124 x M 124 x M 124 x M 124 x M 164 x M 164 x M 168 x M 168 x M 168 x M 208 x M 248 x M 2412 x M 2712 x M 3016 x M 3016 x M 3316 x M 3620 x M 3620 x M 3920 x M 45
17.221.326.933.742.448.360.376.188.9114.3139.7168.3219.1273
323.9355.6406.4457508610
1822
27.534.543.549.561.577.590.5116
141.5170.5221.5276.5327.5359.5411462
513.5616.5
212531384753658194120145174226281333365416467519622
1414161618182022242628303642485460667284
1616181818182022242426283438424650575772
1616181818182022242426283638424650575772
33445556666668888888
1212141414141616182022242830343642465054
-------
557090115140190235285330380425475575
22222628303234384044485252606772788490100
35384040424548525865687588105115125135135140150
666667810121212121618182020202020
2832404656647590105134162192244306362408462500562666
30354552607084104118145170200260312380424478522576686
28324050607084104120142162192254312378432498522576686
44446666888101012121212121212
1.82
2.32.62.62.62.92.93.23.64
4.56.37.18.08.811
12.514.216.0
Dimensions de raccordementConnectiondimensions
D K L01-12
32 02
B3
3135424959677796114138166194250312368418472510572676
04 01-0204
11-1213
C3
21 05 02-04 32-34 05 12-13 11-34 11-34 11-34 12-13 21 11-1213-21 11-34
101520253240506580100125150200250300350400450500600
Types de brides / Flanges types: - - - - - - - - - 34322113121105040201PN 40Dimensions en mm / Dimensions in mm.
Types de brides / Flanges types: - - - - - 211312110501PN 63Dimensions en mm / Dimensions in mm.
* Pour les brides de type 21, le diamètre extérieur de la collerette correspond approximativement au diamètre extérieur du tube.For the flange of type 21, the outside diameter of the collar correspond approximately to the outside diameter of the tube.
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page135
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
136
Brides
EN 1092-1Flanges
d1
PN 2.5
B-D-F
Types de portées de joint / Faces typesDN
1015202532405065801001251502002503003504004505006007008009001000120014001600180020002200240026002800300032003400360038004000
128014801690189020902295249526952910311033103510372039204120
PN 6
3540506070809011012814817820225831236541546552057067077588098010801295151017101920212523352545275029603160337035803790
--
PN 10
158188212268320370430482532585685800905100511101330153517601960217023702570278030003210
-----
PN 16
1581882122683203784384905506107257959001000111513301530175019502150
----------
PN 25
1621882182783353954505055556157208209301030114013501560178019852210
----------
PN 40
162188218285345410465535560615735
-------------------
PN 63
162188218285345410465535560615735840960107011801380
--------------
PN 100
404558687888102122138162188218285345410465535560615
--------------------
f1
B-DF-G
2 2 2222222222222222222222222222222222222
f2
E-G
4.5 4,54,54,54,54,54,54,54,55.0 5.0 5.0 5.05.0 5.0 5.55.5 5.5 5.55.5 5.5 5.5 5.5 6.56.56.56.5 6.5 6.5 ----------
f3
D-FH
4 444 4444 4
4.5 4.5 4.54.54.5 4.5 5 5 5 55 5 5 5 6 6 66 6 6 ----------
f4
H
222222222
2.52.52.52.52.52.533333333444444----------
W
G
2429364351617395106129155183239292343395447497549649751856961106212621462166218622062
----------
X
E
34395057657587109120149175203259312363421473523575675777882987109212921492169218922092
----------
Y
D-FH
35405158667688110121150176204260313364422474524576676778883988109412941494169418942094
----------
Z
D-H
2328354250607294105128154182238291342394446496548648750855960106012601460166018602060
----------
α
H
--
41° 41° 41° 41° 41° 41° 41° 32° 32° 32° 32°32° 32° 27° 27° 27° 27° 27°27° 27° 27° 27° 28° 28° 28° 28° 28°
----------
R
H
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 333 3
3.5 3.5 3.5 3.5 3.53.5 3.5 3.53.5 4 4 44 4 ----------
Utiliser les dimensions PN 6
Use dimensions of PN 6
A B1 C1 C2 C4 Gmax. H1 H2 H3 N1 N2 N3 R1 S
11-21*
Types de brides / Flanges typesBoulonsBoltsDN
100105130140155170195220230265315355430505585655715870
707590100110125145170180210250290360430500560620760
141418182222262626303333363942484856
4 x M 124 x M 124 x M 164 x M 164 x M 204 x M 204 x M 248 x M 248 x M 248 x M 278 x M 3012 x M 3012 x M 3312 x M 3616 x M 3916 x M 4516 x M 4520 x M 52
17.221.326.933.742.448.360.376.188.9114.3139.7168.3219.1273 0323.9355.6406.4508
1822
27.534.543.549.561.377.590.5116
141.5170.5221.5276.5327.5359.5411
513.5
20202224242628303436424860728495106128
20202224242628303236404452606874--
20202224242628303236404452606874--
-------
456080105130180210260300
--
282830323234364044525660------
45454858606268767890105115130157170189
--
668881010121212121216181820--
32344252627090108120150180210278340400460
--
40435260688095118130158188225
------
40455061688296118128150185216278340407460518630
444466668881010121212--
1.82
2.62.62.92.93.23.645
6.37.110.012.514.216.0
--
Dimensions de raccordementConnectiondimensions
D K L 01-12 01 11-1213
C3
202022242628303436404044526068747894
21 05 05 12-13 11 11 11 12-13 21 11-1213-21 11
101520253240506580100125150200250300350400500
Types de brides / Flanges types: - - - - - 211312110501PN 100Dimensions en mm / Dimensions in mm.
Types de portées de joints / Faces types: - - - - - HGFEDB
Dimensions en mm / Dimensions in mm.
* Pour les brides de type 21, le diamètre extérieur de la collerette correspond approximativement au diamètre extérieur du tube.For the flange of type 21, the outside diameter of the collar correspond approximately to the outside diameter of the tube.
Utiliser lesdimensions
PN 6
Use dimensions
of PN 6
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page136
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
137
Brides
NF E 29-203Flanges
Types de brides / Flanges types
f1
C2
d1
B1
A1
C
f1
R
f1
H2
N
H3
C
A1
d1
s
R
f1
H1
A1 N
C
d1
R
f1
H1
B1 N
U
C
B4d1 R
H4
B5 N
C
R
f1
N
C/C1
d1
Type 01 Type 11
Type 13 Type 14 Type 15 Type 21
L
K
D Type 05 Type 12
Types de portées de joints / Faces types
Type face surélevée
(B1 et B2)raised face(B1 and B2)
B Type emboîtement double mâle
tongue-groove facing (male)
C Type emboîtement
double femelletongue-groove facing (female)
D
Type emboîtement
mâlemale facing
E Type emboîtement
femellefemale facing
F
Cf1
d1
x 2 /
x3
W
C f2
Z
Cf3
f3
d2
/ d
3y 1
/ y
2
d2
/ d
3y 1
/ y
2
C
f3
Cf2
x 1 /
x3
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page137
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
138
Brides
NF E 29-203Flanges
(150 Lbs) Types de brides / Flanges types: - - - - - - - 14 15 211312110501ISO PN 20Dimensions en mm / Dimensions in mm.
(300 Lbs) Types de brides / Flanges types: - - - - - 14 15 21121105ISO PN 50Dimensions en mm / Dimensions in mm.
A1 B1 B4 Cmini C1 mini H1 H2 H3 mini N Rmaxi S
01-11-13
Types de brides / Flanges typesBoulonsBoltsDN
8999108117127152178190229254279343406483533597635698813
60.369.879.488.998.4120.6139.7152.4190.5215.9241.3298.4362.0431.8476.2539.8577.8635.0749.3
15.815.815.815.815.819.019.019.019.022.222.222.225.425.428.528.531.831.835.0
4 x M 144 x M 144 x M 144 x M 144 x M 144 x M 164 x M 164 x M 168 x M 168 x M 208 x M 208 x M 2012 x M 2412 x M 2412 x M 2716 x M 2716 x M 3020 x M 3020 x M 33
21.326.933.742.448.360.3
76.1/ 73.088.9114.3
139.7/ 141.3168.3219.1273.0323.9355.6406.4457.0508.0610.0
22.427.734.543.249.562.0
77.8/ 74.790.7116.1
142.2/ 143.8170.7221.5276.4327.2359.2410.5461.8513.1616.0
15.820.826.735.040.952.6
65.8/ 62.778.0102.4
126.7/ 128.3154.2202.7254.5304.8
11.212.714.315.917.519.122.323.923.923.925.428.630.231.835.036.639.742.947.7
--
11.212.714.315.917.519.123.923.925.428.630.231.835.036.639.742.947.7
16161721222529303337404449565763687383
4852565762637070768989102102114127127140144152
6.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.4
30384959657890108135164192246305365400457505559664
3335688101111131313131313131313
2.62.93.23.63.64.04.55.05.66.37.18.08.810.011.012.514.216.017.5
Dimensions de raccordementConnectiondimensions
D K L 01-12-14 14
B5
22.928.235.043.750.062.5
78.5/ 75.491.4116.8
142.9/ 144.5171.4222.2277.4328.2360.2411.2462.3514.4616.0
1505-1112-1314-15
21
C2 mini
12141618192124262728313438424348525662
01 12-1314 11 11
11-1213-1415-21
11-1213-1415-21
11
U
1011131416171921
14
1520253240506580100125150200250300350400450500600
H4
1616172122252930333740444956798797103111
15
A préciserà la
commandeTo specify
in the order
A1 B1 B4 Cmini H1 H2 H3 mini N Rmaxi S
11
Types de brides / Flanges typesBoulonsBoltsDN
95117124133156165190210254279318381444521584648711775914
66.782.688.998.4114.3127.0149.2168.3200.0235.0269.9330.2387.4450.8514.4571.5628.6685.8812.8
15.819.019.019.022.219.022.222.222.222.222.225.428.531.831.835.035.035.041.1
4 x M144 x M164 x M164 x M164 x M208 x M168 x M208 x M208 x M208 x M2012 x M2012 x M2416 x M2716 x M3020 x M3020 x M3324 x M3324 x M3324 x M39
21.326.933.742.448.360.3
76.1/ 73.088.9114.3
139.7/ 141.3168.3219.1273.0323.9355.6406.4457.0508.0610.0
22.427.734.543.249.562.0
77.8/ 74.790.7116.1
142.2/ 143.8170.7221.5276.4327.2359.2410.5461.8513.1616.0
15.820.826.735.040.952.6
65.8/ 62.778.0102.4
126.7/ 128.3154.2202.7254.5304.8
14.215.717.519.020.622.425.428.431.835.036.641.147.850.853.857.260.563.569.9
222527273033384348515262667376838995106
5257626568707679869898111117130143146159162168
6.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.4
384854637084100117146178206260320375425483533587701
3335688101111131313131313131313
2.62.93.23.63.64.04.55.05.66.37.18.08.810.011.012.514.216.017.5
Dimensions de raccordementConnectiondimensions
D K L 12 - 14 14
B5
22.928.235.043.750.062.5
78.5/ 75.491.4116.8
142.9/ 144.5171.4222.2277.4328.2360.2411.2462.3514.4616.0
1505-1112-14
1512-14 11 11
11-1214-15
21
11-1214-15
2111
U
1011131416171921-----------
14
1520253240506580100125150200250300350400450500600
H4
22252727303338434851526295102111121130140152
15
A préciserà la
commandeTo specify
in the order
Dans sa version de 1982 l’ANSI B 16-5 procède à la conversion en millimètres de ces notes en inches en appliquant des règles d’arrondissage contestables qui conduiraient à une modification des matériels de fabrication ou, parfois, à des impossibilités de mise en œuvre des brides. La présente norme donne donc des dimensions en millimètres différentes de celles de l’ANSI B 16-5 mais parfaitement compatibles avec les dimensions en inches de cette norme.In its version of 1982 the AINSI B 16-5 proceeds to the conversion in millimetres of these notes inches by applying questionable rules of rounding which would do to a modification of the equipments of manufacturing or, sometimes, to impossibilities of stake in work of flanges. The present standard thus gives dimensions in millimetres different from those of the AINSI B on 16-5 but perfectly compatible with the dimensions inches of this standard.
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page138
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
139
Brides
NF E 29-203Flanges
Dans sa version de 1982 l’ANSI B 16-5 procède à la conversion en millimètres de ces notes en inches en appliquant des règles d’arrondissage contestables qui conduiraient à une modification des matériels de fabrication ou, parfois, à des impossibilités de mise en œuvre des brides. La présente norme donne donc des dimensions en millimètres différentes de celles de l’ANSI B 16-5 mais parfaitement compatibles avec les dimensions en inches de cette norme.In its version of 1982 the AINSI B 16-5 proceeds to the conversion in millimetres of these notes inches by applying questionable rules of rounding which would do to a modification of the equipments of manufacturing or, sometimes, to impossibilities of stake in work of flanges. The present standard thus gives dimensions in millimetres different from those of the AINSI B on 16-5 but perfectly compatible with the dimensions inches of this standard.
(600 Lbs) Types de brides / Flanges types: - - - - 14 21121105ISO PN 100Dimensions en mm / Dimensions in mm.
(900 Lbs) Types de brides / Flanges types: - - - - 14 21121105ISO PN 150Dimensions en mm / Dimensions in mm.
A1 B1 B4 Cmini H1 H2 H3 mini N Rmaxi S
11
Types de brides / Flanges typesBoulonsBoltsDN
95117124133156165190210273330356419508559603686743813940
66.782.688.998.4114.3127.0149.2168.3215.9266.7292.1349.2431.8489.0527.0603.2654.0723.9838.2
15.819.019.019.022.219.022.222.225.428.528.531.835.035.038.141.144.544.550.8
4 x M 144 x M 164 x M 164 x M 164 x M 208 x M 168 x M 208 x M 208 x M 248 x M 2712 x M 2712 x M 3016 x M 3320 x M 3320 x M 3620 x M 3920 x M 4224 x M 4224 x M 48
21.326.933.742.448.360.3
76.1/ 73.088.9114.3
139.7/ 141.3168.3219.1273.0323.9355.6406.4457.0508.0610.0
22.427.734.543.249.562.0
77.8/ 74.790.7116.1
142.2/ 143.8170.7221.5276.4327.2359.2410.5461.8513.1616.0
14.215.717.520.622.425.428.431.838.144.547.855.663.566.569.976.282.688.9101.6
222527293237414654606776869294106117127140
5257626770737983102114117133152156165178184190203
6.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.4
384854647084100118152189222273343400432495546610718
3335688101111131313131313131313
Dimensions de raccordementConnectiondimensions
D K L 12-14 14 05-1112-14 12-14 11 11 11-12
14-2111-1214-21 11
U
1011131416171921-----------
14
1520253240506580100125150200250300350400450500600
A préciserà la
commandeTo specify
in the order
A p
réci
ser à
la c
omm
ande
/ To
spec
ify in
the
orde
r
A1 B1 B4 Cmini H1 H2 H3 mini N Rmaxi S
11
Types de brides / Flanges typesBoulonsBoltsDN
2412923493814705466106417057878571041
190.5235.0279.4317.5393.7469.9533.4558.8616.0685.8749.3901.7
25.431.835.031.838.138.138.141.144.550.853.866.5
8 x M 248 x M 308 x M 3312 x M 3012 x M 3616 x M 3620 x M 3620 x M 3920 x M 4220 x M 4820 x M 5220 x M 64
88.9114.3
139.7/ 141.3168.3219.1273.0323.9355.6406.4457.0508.0610.0
90.7116.1
142.2/ 143.8170.7221.5276.4327.2359.2410.5461.8513.1616.0
------------
38.144.550.855.663.569.979.285.988.9101.6108.0139.7
54707986102108117130133152159203
102114127140162184200213216229248292
6.46.46.46.46.46.46.46.46.46.46.46.4
127159190235298368419451508565622749
101111131313131313131313
Dimensions de raccordementConnectiondimensions
D K L 12-14 14 05-1112-14 12-14 11 11 11-12
14-2111-1214-21 11
U
------------
14
1520253240506580100125150200250300350400450500600
A p
réci
ser à
la c
omm
ande
To
spec
ify in
the
orde
r
Il n’existe pas de brides ISO PN 150 dans cette gamme de DN, prendre les brides ISO PN 250
There is no flanges ISO PN 150 in this range of DN, to take flanges ISO PN 250
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page139
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
140
Brides
NF E 29-203Flanges
Dans sa version de 1982 l’ANSI B 16-5 procède à la conversion en millimètres de ces notes en inches en appliquant des règles d’arrondissage contestables qui conduiraient à une modification des matériels de fabrication ou, parfois, à des impossibilités de mise en œuvre des brides. La présente norme donne donc des dimensions en millimètres différentes de celles de l’ANSI B 16-5 mais parfaitement compatibles avec les dimensions en inches de cette norme.In its version of 1982 the AINSI B 16-5 proceeds to the conversion in millimetres of these notes inches by applying questionable rules of rounding which would do to a modification of the equipments of manufacturing or, sometimes, to impossibilitiesof stake in work of flanges. The present standard thus gives dimensions in millimetresdifferent from those of the AINSI B on 16-5 but perfectly compatible with the dimensions inches of this standard.
(1500 Lbs) Types de brides / Flanges types: - - - - 14 21121105ISO PN 250Dimensions en mm / Dimensions in mm.
(2500 Lbs) Types de brides / Flanges types: - - 11 2105ISO PN 420Dimensions en mm / Dimensions in mm.
A1 B1 B4 Cmini H1 H2 H3 mini N Rmaxi S
11
Types de brides / Flanges typesBoulonsBoltsDN
1211301491591782162442673113753944835846737498269149841168
82.688.9101.6111.1123.8165.1190.5203.2241.3292.1317.5393.7482.6571.5635.0704.8774.7831.8990.6
22.222.225.425.428.525.428.531.835.041.138.144.550.853.860.566.573.279.291.9
4 x M 204 x M 204 x M 244 x M 244 x M 278 x M 248 x M 278 x M 308 x M 338 x M 3912 x M 3612 x M 4212 x M 4816 x M 5216 x M 5616 x M 64
16 x M 70 (1)
16 x M 7616 x M 90
21.326.933.742.448.360.3
76.1/ 73.088.9114.3
139.7/ 141.3168.3219.1273.0323.9355.6406.4457.0508.0610.0
22.427.734.543.249.562.0
77.8/ 74.7------------
22.425.428.428.431.838.141.147.853.873.282.691.9108.0124.0133.4146.0162.0177.6203.2
32354141445763------------
6070737383102105118124155171213254283298311327356406
6.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.4
3844526370105124133162197229292368451495552597641762
3335688101111131313131313131313
Dimensions de raccordementConnectiondimensions
D K L 12-14 14 05-1112-14 12-14 11 11 11-12
14-2111-1214-21 11
U
10111314161719------------
14
1520253240506580100125150200250300350400450500600
A préciserà la
commandeTo specify
in the order
A p
réci
ser à
la c
omm
ande
To sp
ecify
in th
e or
der
A1 C H2 H3 mini N Rmaxi S
11
Types de brides / Flanges typesBoulonsBoltsDN
133140159184203235267305356419483552673762
88.995.3108.0130.0146.0171.5196.9228.6273.0323.9368.3438.2539.8619.3
22.222.225.428.531.828.531.835.041.147.853.853.866.573.2
4 x M204 x M204 x M244 x M274 x M308 x M278 x M308 x M338 x M398 x M458 x M5212 x M5212 x M64
12 x M70 (1)
21.326.933.742.448.360.3
76.1/ 73.088.9114.3
139.7/ 141.3168.3219.1273.0323.9
30.231.835.038.144.550.857.266.576.291.9108.0127.0165.1184.2
73798995111127143168190229273317419464
6.46.46.46.46.46.46.46.46.46.46.46.46.46.4
435157737995114133165203235305375441
333568810111113131313
Dimensions de raccordementConnectiondimensions
D K L 05-11 11 11 11-21 11-21 11
1520253240506580100125150200250300
A p
réci
ser à
la c
omm
ande
To sp
ecify
in th
e or
der
1. Compte tenu de l’écart de section résistante de cette boulonnerie par rapport à celle du boulon 2"3/4 UNC (– 7,1%) des précautions particulières doivent être prisesau niveau des spécifications qualitatives sur cette boulonnerie.Considering the difference from resistant section of this bolts with regard to that of the bolt 2"3/4 UNC (–7.1%) precautions must be taken at the level of the qualitative specifications on this bolts.
DN
mm1520253240506580100125150200250300350400450500600
mm34.942.950.863.573.092.1104.8127.0157.2185.7215.9269.9323.8381.0412.8469.9533.4584.2692.2
d1
mm18.724.230.638.544.857.668.784.5109.9136.9162.3213.1267.1317.9349.6400.4451.2502.0603.6
x1
mm35.343.348.057.663.983.095.6117.9144.9173.4203.6254.4305.2362.4394.1448.1511.6559.2667.2
x2
mm35.343.351.263.973.492.5105.2127.4157.2186.1216.3270.3324.2381.4413.2470.3533.8584.6692.6
x3
mm25.032.937.747.253.672.685.3107.6131.4159.9190.1237.7285.4342.5374.2425.0488.6533.0641.0
w
mm36.144.052.064.774.293.3106.0128.2158.4186.9217.1271.1325.0382.2413.9471.1534.6585.4693.3
y1
mm36.144.048.858.364.783.796.4118.7145.6174.2204.4255.2306.0363.1394.9448.9512.4560.0667.9
y2
mm19.425.031.439.345.658.369.485.3110.7137.7163.1213.9267.9318.7350.4401.2452.0502.8604.4
y3
mm6.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.4
f2
mm4.84.84.84.84.84.84.84.84.84.84.84.84.84.84.84.84.84.84.8
f3
mm44.552.557.567.073.092.0105.0127.0157.5186.0216.0270.0324.0381.0413.0470.0533.5584.5692.5
d2
mm46.054.062.075.084.5103.5116.0138.5168.5197.0227.0281.0335.0392.5424.0481.0544.5595.5703.5
d3
mm24.232.236.946.452.871.884.5106.8130.6159.2189.3236.8284.6341.7373.5424.3487.8532.2640.2
z
2. B1 applicable à ISO PN 20 et ISO PN 50, cette dimension est inclusedans l’épaisseur minimale de la bride.B2 applicable à ISO PN100 et ISO PN 150 cette dimension est à ajouter à l’épaisseur minimale de la bride.B1 applicable to ISO PN 20 and ISO PN 20, this dimension is includedin the minimal thickness of the flange.B2 applicable to ISO PN 100 and ISO PN 150, this dimension is to be added to the minimal thickness of the flange.
mm mm1.61.61.61.61.61.61.61.61.61.61.61.61.61.61.61.61.61.61.6
6.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.46.4
f1
B1(2) B2
(2)
ISO PN420ISO PN250ISO PN100ISO PN50ISO PN20
Types de portées de joints / Faces types
Dimensions en mm / Dimensions in mm.
Note. Les dimensions données dans le présent tableau pour les portéesde joint (notamment à emboîtement) s’appliquent aux brides à l’étatde livraison. En cas de besoin de revêtement ou de finition spéciale,mention doit en être faite à la commande de manière à prévoir les surépaisseurs convenables pour l’usinage ultérieur des surfaces de raccordement aux dimensions requises.L’emboîtement large n’est pas prévu pour ISO PN20.The dimensions given in the present table for the face of joint (notablyin fitting) apply to flange in the state of delivery. If necessary of coveror special finish, mention must be made with order so as to foresee thelatest suitable machining allowances of the surfaces of connecting in the required dimensions.The wide fitting is not foreseen for ISO PN 20.
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page140
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
141
DNinchmm
gPoids /Weightab
mmmm
1/8"5323532
400*
524036
150*
87484290*
1405648
100*
218696070*
368857555
6651059530
82611610520
131114013015
18841761658
30952051905
60572602452
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Courbe mâle et femelle à grand rayonMale and female long sweep bend
1
DNinchmm
gPoids /Weighta mm
6040
130*
1044880*
16355
100*
2746980*
3988550
71010525
89911620
139314010
22591768
35612055
64172602
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Courbe femelle à grand rayonFemale long sweep bend
2
DNinchmm
gPoids / Weightb mm
6042
100*
954870*
1636050*
3007525
4969525
72310520
113013015
1950165vrac
2640190vrac
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
Emballage / Packing
Courbe mâle à grand rayonMale long sweep bend
3
DNinchmm
gPoids /Weightab
mmmm
402621
vrac
563024
130*
100363080*
178433650*
279514235
435645435
509685825
846817020
1328998610
190911310010
32771421255
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Courbe mâle et femelle à 45°45° male and female bend
40
DNinchmm
gPoids / Weightab
mmmm
132366060*
201437440*
350518825
5046410930
6056811620
9328113815
1779991688
23471131945
35701422412
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Courbe femelle à 45°45° female bend
41
DNinchmm
gPoids / Weighta mm
1/8"52919
vrac
4221
180*
5625
300*
10628
220*
14533
140*
22738
120*
3484560
4325040
6515835
9256920
12667812
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
Emballage / Packing
Coude femelleFemale elbow
90
DNinchmm
gPoids /Weightab
mmmm
1/8"5261925
vrac
322128
200*
532532
150*
982837
180*
1433343
150*
222385280*
354456040
413506530
663587420
1113698810
154078986
2396961184
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Coude mâle et femelleMale and female elbow
92
Emballage: nombre de pièces par carton - * Sachets plastique de 10 pièces.Packing : number of pieces per carton - * Plastic bags with 10 pieces.
DNinchmm
gPoids /Weighta mm
5030
vrac
843890*
1344260*
2114940*
3175520
4445910
52268
vrac
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
Emballage / Packing
Coude mâleMale elbow
94
Raccords en fonte malléable
Malleable iron fittings
a
b
2276966
4"102
DNinchmm
gPoids /Weightac
mmmm
118482180*
167522560*
279582870*
362623350
482723850
838824520
1008905015
14331005810
2296122704
3137135784
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
Emballage / Packing
Coude union femelle à joint coniqueFemale union elbow, taper seat
96
DNinchmm
gPoids /Weightbc
mmmm
129612170*
182652550*
306762860*
421823340*
567943840
9571074525
11621155020
17221285810
2798152705
3593168784
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
Emballage / Packing
Coude union mâle et femelle à joint coniqueMale and female union elbow, taper seat
98
a
a
a
a
a
b
b
b
r a
a
a
45°
b
r
a
c
96c
374380
a
45°
a
r b
b
c
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page141
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
142
DNinchmm
gPoids /Weightad
mmmm
57201090*
91223890*
122254360*
183284840*
245335725
367366215
570437320
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
Emballage / Packing
Coude femelle à 45°45° female elbow
120
DNinchmm
gPoids /Weightlhz
mmmmmm
5520251010*
7322289
60*
10725321040*
15828371120*
25433431430
32736461710
50943551910
701465419
vrac
1058526122
vrac
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
Emballage / Packing
Coude mâle et femelle à 45° 45° male and female elbow
121
DNinchmm
gPoids /Weighta mm
1/8"53819
vrac
5321
140*
8025
200*
14328
150*
1933390*
3043850*
4824550
5985040
8675820
13316916
16227810
3156964
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Té femelleFemale tee
130
inchDN
mmgPoids /Weight
ac
mmmm
168452450
248502820
445633330
623764015
862854315
13541025315
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
Emballage / Packing
Té femelle à un embranchement cintréPitcher female tee
131
DNinchmm
gPoids /Weightlz
mmmm
198453240
278503530
451634635
691765720
1/2"15
3/4"20
1"26
1"1/433
Emballage / Packing
Té femelle àdeux embranchements cintrés, E2Twin female elbow, E2
132
DNinchmm
gPoids / Weightlhz
mmmmmm
5017287
vrac
80223112
vrac
11525381280
17833451840
28839532220
1/4"8
3/8"12
1/2"15
3/4"20
1"26
Emballage / Packing
Té, avec embranchementsmâle et femelleTee, male and female branch
133
DNinchmm
gPoids /Weightabz
mmmmmm
61222812160
8424321460
11827371480
21332431785
27737502030
40045582615
52750653110
7995969355
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
Emballage / Packing
Té avec passage mâle et femelleTee, male and female run
134
DNinchmm
gPoids /Weighth mm
1213740
1914350
2814815
1/2"15
3/4"20
1"26
Emballage / Packing
Té mâleMale tee
135
DNinchmm
gPoids /Weightac
mmmm
1361646
vrac
195235490
288246450
421287720
604347520
748368420
11404310020
19325012210
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
Emballage / Packing
Té femelle à 45°45° female tee
165
DNinchmm
gPoids /Weighta mm
8021
100*
1122560*
1452840*
2323350*
3533835
5644530
6745020
9805820
14666910
2044785
3467964
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Croix femelleFemale cross
180
Emballage: nombre de pièces par carton - * Sachets plastique de 10 pièces.Packing : number of pieces per carton - * Plastic bags with 10 pieces.
a
45°a
r
d
h
zz
ll
aa
ah
h
h
ac
a
ac
c
45°
aa
a a
ab
a
z
z
Raccords en fonte malléable
Malleable iron fittings
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:54 Page142
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
143
DNinchmm
gPoids /Weightlz
mmmm
702313
vrac
922414
vrac
1202714
vrac
1783318
vrac
2804023
vrac
1/4"8
3/8"12
1/2"15
3/4"20
1"26
Emballage / Packing
Distributeur femelleFemale Y-piece
220
DNinchmm
gPoids /WeightaZ
mmmm
79251590*
1412815
100*
191331830*
291382150
426452625
518503120
796583415
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
Emballage / Packing
Distributeur femelle à coudeSide outlet female elbow
221
DNinchmm
gPoids /Weighta mm
1672850
2403330
3383840
1/2"15
3/4"20
1"26
Emballage / Packing
Distributeur femelle à téSide outlet female tee
223
DNinchmm
gPoids /Weighta mm
2933
100*
4135
200*
6343
350*
1124860*
1585540*
2456060
3466345
4787025
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
Emballage / Packing
Manchon mâle et femelleMale and female socket
246
DNinchmm
gPoids /Weighta mm
1/8"52125
vrac
3327
250*
4030
350*
6336
300*
8339
200*
12545
130*
1935070
2645550
3926535
5497415
7658010
1277945
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Manchon femelleFemale socket
270
DNinchmm
gPoids /Weighta mm
3227
vrac
4230
180*
6836
220*
8939
150*
1354540*
2005070
2615550
4256535
5487415
7868010
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
Emballage / Packing
Manchon femelle avec filetage à droite et à gaucheFemale socket, right and left hand thread
271
DNinchmm
gPoids / Weighta mm
1/8"•51629
100*
2836
280*
3838
220*
7244
360*
10947
180*
18153
120*
2765760
3315950
5276825
8177520
11778310
1925954
1/4"•8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Mamelon mâleHexagon male nipple
280
DNinchmm
gPoids / Weighta mm
4138
200*
7044120
1044770
1875340
2605730
3205925
48768
vrac
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
Emballage / Packing
281
DNinchmm
gPoids / Weightc mm
1/8"•51120500
2122400
2724350
4730
400*
7532
260*
10436
160*
1763960
2194150
3314860
5575415
8186010
1310705
1/4"•8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Bouchon mâleBeaded plug
290
DNinchmm
gPoids / Weighths
mmmm
1/8"•56168
1000*
162110
500*
261910
500*
342311
400*
452717
200*
783219
150*
1263522100
1533622130
253432710
1/4"•8
3/8"•12
1/2"•15
3/4"•20
1"•26
1"1/433
1"1/240
2"50
Emballage / Packing
Bouchon mâle sans bourrelet T8Plug, plain T8
291
Emballage: nombre de pièces par carton - * Sachets plastique de 10 pièces - • Raccords en acier.Packing : number of pieces per carton - * Plastic bags with 10 pieces - • Steel fittings.
45°45°
zl
zl
zl
a
a
a
z
z
a
aa
a
a
a
c
a h
s
Mamelon mâle avec filetage à droite et à gaucheHexagon male nipple right and left-hand thread
Raccords en fonte malléable
Malleable iron fittings
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:55 Page143
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
144
DNinchmm
gPoids / Weight 17500
27500
41400
69300
135150
1/4"•8
3/8"•12
1/2"•15
3/4"•20
1"•26
Emballage / Packing
Bouchon mâle tête hexagonaleMale plug
292
DNinchmm
gPoids / Weighta mm
2415180
3218230
5522200
7826100
15431120
2553350
2913340
5263850
7054330
10634610
2056525
1/4"•8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Bouchon femelle hexagonalFemale hexagon cap
300
DNinchmm
gPoids / Weighta mm
116
500
207
300
318
250*
329
220*
6610
120*
8811110
981280
1651350
3341625
4071920
1/4"•8
3/8"•12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
Emballage / Packing
Contre-écrou évidéRecessed backnut
312
DNinchmm
gPoids / Weightlabcdhs
mmmmmmmmmmmmmm
16590136538
11.564560
226100147546
11.572655
3201201590561585630
42613016100631595725
500140181107715100820
3/4"20
1"26
1"1/433
1"1/240
2"50
Emballage / Packing
Bride ovale P.N.1Oval screwed flange N.P.1
320
DNinchmm
gPoids / Weightlacs
mmmmmmmm
3791001446630
5282101556620
6921301663720
9041401877820
12441602093920
1945190221071010
240721024130117
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Bride ronde sans trou P.N.1Undrilled circular screwed flange N.P.1
321
DNinchmm
gPoids / Weighta mm
9642
110*
1354570*
21448
100*
2685270*
3475870*
6036540
7277030
10647820
17328512
23629510
46321104
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Manchon femelle union à joint platFemale flat seat union
330
DNinchmm
gPoids / Weightb mm
1045560*
1445860*
24066
120*
3357260
4498050
7459030
9309525
134510615
22231185
28261304
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
Emballage / Packing
Manchon union à joint plat mâle et femelle Male and female flat seat union
331
DNinchmm
gPoids / Weighta mm
1/8"57038
vrac
9442
100*
1354570*
21548
100*
2725270*
3485870*
6056530
7327030
10917820
17628512
24059510
48881104
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Manchon femelle union à joint conique Taper female conical seat union
340
Emballage: nombre de pièces par carton - * Sachets plastique de 10 pièces - • Raccords en acier.Packing : number of pieces per carton - * Plastic bags with 10 pieces - • Steel fittings.
a a
370
374
372
a
l b c
s
ad
h
a 374
380
381
b374
370
371
l c
s
a
Raccords en fonte malléable
Malleable iron fittings
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:55 Page144
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
145
DNinchmm
gPoids / Weighths
mmmm
9107
500*
15108
500*
261010
400*
511712350
732019100
147222230
409272720
1/4"•8
3/8"•12
1/2"•15
3/4"•20
1"26
1"1/433
2"40
Emballage / Packing
Bouchon mâle à carré creux T11Plug with recessed head T11
596
DNinchmm
gPoids / Weighthh1
h2
mmmmmm
105693532
vrac
141733833
vrac
215844339
vrac
373934942
vrac
5071035447
vrac
7881155855
vrac
9491216257
vrac
14901357162
vrac
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
Emballage / Packing
Manchon union mâle à joint coniqueTaper conical seat male union
344
DNinchmm
gPoids / Weightb mm
10355
100*
1505860*
24266
120*
3317260*
4338050
7249030
8869525
138010615
22641185
28611304
54291452
1/4"8
3/8"12
1/2"15
3/4"20
1"26
1"1/433
1"1/240
2"50
2"1/266
3"80
4"102
Emballage / Packing
Manchon union à joint conique mâle et femelle Male and female taper conical seat union
341
DN
inch1/4" x 1/8"1/2" x 3/8"3/4" x 1/2"1" x 1/2"1" x 3/4"
1"1/4 x 3/4"1"1/4 x 1"
1"1/2 x 1"1/42" x 1"
2" x 1"1/42" x 1"1/22"1/2 x 2"
4177131189205262313417456537576903
Coude femelleFemale elbow
g
PoidsWeight Emballage
Packing
240*200*16040*303025351010105
90r
DN
inch3/8" x 1/4"1/2" x 3/8"3/4" x 1/2"1" x 3/4"
Coude mâle et femelleMale and female elbow
g
PoidsWeight Emballage
Packing
vrac90*60*40*
92r
DN
inch1/2" x 3/8" x 3/8"1/2" x 1/2" x 3/8"1/2" x 3/4" x 1/2"1/2" x 1" x 1/2"
3/4" x 3/8" x 3/4"3/4" x 1/2" x 3/4"3/4" x 1" x 3/4"1" x 3/8" x 1"1" x 1/2" x 1"1" x 3/4" x 1"1" x 1"1/4 x 1"1" x 1"1/2 x 1"
1"1/4 x 3/8" x 1"1/41"1/4 x 1/2" x 1"1/41"1/4 x 3/4" x 1"1/4
1"1/4 x 1 x 1"1/41"1/4 x 1"1/2 x 1"1/41"1/2 x 1/2" x 1"1/21"1/2 x 3/4" x 1"1/2
1"1/2 x 1 x 1"1/21"1/2 x 1"1/4 x 1"1/2
1"1/2 x 2" x 1"1/22" x 1/2" x 2"2" x 3/4" x 2"2" x 1" x 2"
2" x 1"1/4 x 2"2" x 1"1/2 x 2"
1/2" x 1/2" x 3/8"1/2" x 3/8" x 3/8"3/4" x 3/8" x 1/2"3/4" x 1/2" x 3/8"3/4" x 1/2" x 1/2"3/4" x 3/4" x 3/8"3/4" x 3/4" x 1/2"3/4" x 1" x 1/2"
Té femelleFemale tee
EmballagePacking
10*18040*30*40*110*50*20*80*60*40302560554020303025201020202520201206050*5080*40*40*30*
130r
10511916120914516524223322025835840329131735342448039640851855761751755056969075411699141142153165175222
g
PoidsWeight
8813316354
Réductions Reductions
Emballage: nombre de pièces par carton - * Sachets plastique de 10 pièces - • Raccords en acier.Packing : number of pieces per carton - * Plastic bags with 10 pieces - • Steel fittings.
DN
inch1" x 1/2" x 1/2"1" x 1/2" x 3/4"1" x 3/4" x 1/2"1 x 3/4" x 3/4"1" x 1" x 3/8"1" x 1" x 1/2"1" x 1" x 3/4"
1" x 1"1/4 x 3/4"1"1/4 x 1/2" x 1"
1"1/4 x 3/4" x 3/4"1"1/4 x 3/4" x 1"1"1/4 x 1" x 1/2"1"1/4 x 1" x 3/4"1"1/4 x 1" x 1"
1"1/4 x 1"1/4 x 1/2"1"1/4 x 1"1/4 x 3/4"
1"1/4 x 1"1/4 x 11"1/4 x 2 x 1"1/4
1"1/2 x 1/2" x 1"1/41"1/2 x 3/4" x 1"1/4
1"1/2 x 1 x 1"1"1/2 x 1" x 1"1/4
1"1/2 x 1"1/4 x 1"1/41"1/2 x 1"1/2 x 1/2"1"1/2 x 1"1/2 x 3/4"1"1/2 x 1"1/2 x 1"
1"1/2 x 1"1/2 x 1"1/42" x 1/2" x 1"1/22" x 3/4" x 1"1/22" x 1" x 1"1/2
2" x 1"1/4 x 1"1/42" x 1"1/4 x 1"1/22" x 1"1/2 x 1"1/2
2" x 2" x 1"1/4
EmballagePacking
30*60*30*30*20*40*40*2025204020203515301510*40301525202525202010102020202020
210253247234265281286358296250329288349385398394437543348405444446520502503531561452500549616624677802
g
PoidsWeight
b
374
380
382
hh 2
h 1
374
383
382
h
s
a
b
ac
b
ac
a
a
b
Raccords en fonte malléable
Malleable iron fittings
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:55 Page145
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
146
DN
inch1/4" x 1/8"•3/8" x 1/8"•3/8" x 1/4"•1/2" x 1/8"•1/2" x 1/4"•1/2" x 3/8"•3/4" x 1/4"3/4" x 3/8"3/4" x 1/2"1" x 1/4"1" x 3/8"1" x 1/2"1" x 3/4"
1"1/4 x 3/8"1"1/4 x 1/2"1"1/4 x 3/4"1"1/4 x 1"
1"1/2 x 3/8"1"1/2 x 1/2"1"1/2 x 3/4"1"1/2 x 1"
1"1/2 x 1"1/42 x 1/2"2 x 3/4"2" x 1"
2" x 1"1/42" x 1"1/22"1/2 x 1"
2"1/2 x 1"1/42"1/2 x 1"1/2
2"1/2 x 2"3" x 1"1/2
3" x 2"3" x 2"1/2
4" x 2"4" x 2"1/2
4" x 3"
Mamelon réduit mâle et femelleMale and female reducing bushe
EmballagePacking
100100400*100250*450*150*150*280*80*80*80*180*70707013050505050140202025255025253030202020121212
241r
1221143635246659491021009478174164154132211213202186139382400382338293597566593486891871628143913531344
g
PoidsWeight
Manchon réduit femelleFemale reducing socket
240r
DN
inch1/4" x 1/8"3/8" x 1/8"3/8" x 1/4"1/2" x 1/4"1/2" x 3/8"3/4" x 1/4"3/4" x 3/8"3/4" x 1/2"1" x 3/8"1" x 1/2"1" x 3/4"
1"1/4 x 3/8"1"1/4 x 1/2"1"1/4 x 3/4"1"1/4 x 1"
1"1/2 x 1/2"1"1/2 x 3/4"1"1/2 x 1"
1"1/2 x 1"1/42" x 1/2"2" x 3/4"2" x 1"
2" x 1"1/42" x 1"1/22"1/2 x 1"
2"1/2 x 1"1/42"1/2 x 1"1/2
2"1/2 x 23" x 1"1/2
3" x 2"3" x 2"1/2
EmballagePacking
vracvrac180*10*130*vrac80*80*50*50*50*vrac4040703030255015153530301010151581510
3037405962769610213312112515191206214261267273288369402398400410551666610588900720850
g
PoidsWeight
DN
mm1/4" x 1/8"3/8" x 1/4"1/2" x 1/4"1/2" x 3/8"3/4" x 3/8"3/4" x 1/2"1" x 1/2"1" x 3/4"
1"1/4 x 1/2"1"1/4 x 3/4"1"1/4 x 1"
1"1/2 x 3/4"1"1/2 x 1"
1"1/2 x 1"1/42" x 3/4"2" x 1"
2" x 1"1/42" x 1"1/22"1/2 x 2"3" x 2"1/2
Manchon réduit mâle et femelleMale and female reducing socket
EmballagePacking
vracvracvrac130*70*70*50*50*35353525252520151515106
246r
2336686090103147157224218246255286306333389398418606961
g
PoidsWeightDN
mm1/4" x 1/8"•3/8" x 1/4"•1/2" x 1/4"•1/2" x 3/8"•3/4" x 3/8"3/4" x 1/2"1" x 1/2"1" x 3/4"
1"1/4 x 1/2"1"1/4 x 3/4"1"1/4 x 1"
1"1/2 x 3/4"1"1/2 x 1"
1"1/2 x 1"1/42" x 1"
2" x 1"1/42" x 1"1/22"1/2 x 2"3" x 2"1/2
Mamelon réduit mâleMale reducing nipple
EmballagePacking
500*400*300*200*150*150*60*60*304040353025202015108
245r
183052526291141146213210220276278280440457500735870
g
PoidsWeight
Réductions Reductions
Emballage: nombre de pièces par carton - * Sachets plastique de 10 piècesPacking : number of pieces per carton - * Plastic bags with 10 pieces
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:55 Page146
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
147
d
mm21.326.933.742.448.360.370
76.188.9101.6108
114.3133
139.7159
168.3193.7219.1273.0323.9
s
mm2
2.32.62.62.62.92.92.93.23.63.63.644
4.54.55.45.96.37.1
Rayon a Radius a
mm27.528.538
47.557769295
114.5133.5142.5152.5181
190.5216
228.5270305381457
mm
± 2.5
± 3
± 4
± 5
b
mm3842556981106127133159184196210247260294313367415517619
Ecartement cGap c
mm55577695114152184190229267285305362381432547540610762914
mm
± 8
± 10
± 14
± 16
0.040.070.120.190.270.490.700.791.221.832.082.373.644.045.806.5010.614.924.940
kg
PoidsWeight
Eléments à souder Welding parts
d
mm21.326.933.742.448.360.376.188.9101.6114.3
DN
inch1/2"3/4"
11"1/41"1/2
22"1/2
33"1/2
4
s
mm2.652.653.253.253.253.653.654.054.054.50
Rayon a Radius a
mm38
28.538
47.5577695
114.5133.5152.5
mm
±2.5
±3
b
mm4942556982106133159184210
Ecartement cGap c
mm76577695114152190229267305
mm
±5
±6
X 7346
0.0730.0670.1460.2350.3250.6100.9751.5172.0503.005
kg
PoidsWeight
d
mm
42.4
48.3
60.3
70
76.1
88.9
101.6
108
114.3
133
139.7
159
168.3
e
mm2.6
2.6
2.9
2.9
2.9
3.2
3.6
3.6
3.6
4
4
4.5
4.5
d1
mm26.933.726.933.742.433.742.448.333.742.448.360.348.360.370
76.160.370.376.188.960.376.188.960.370
76.188.9101.688.9114.388.9108
114.388.9108
114.313388.9114.3139.7
e1
mm2
2.32
2.32.62.32.62.62.32.62.62.92.52.92.92.92.92.92.93.22.92.93.22.92.92.93.23.63.23.63.23.63.63.23.63.64
3.23.64
L
mm5139675538776150100958463108866865110928066122926814312511490661227513599881721351248918914194
X 7343
0.130.100.120.160.110.330.260.210.490.500.450.340.750.590.470.390.990.830.720.511.150.870.641.461.281.170.920.671.550.962.101.491.192.962.322.131.533.592.631.78
kg
PoidsWeight
d
mm21.3
26.9
33.7
42.4
48.3
60.3
7076.188.9101.6108
114.3133
139.7159
168.3
s
mm22
2.32.62.62.62.62.62.62.62.62.62.92.92.92.92.93.23.63.63.644
4.54.5
Rayon a Radius a
mm42.552.557.562.567.572.582.592.597.5107.5115
122.5127.5135
142.5160175205
237.5252.5270
312.5330375390
mm
± 2.5
± 5
± 10
b
mm536571778389101114120132140149156165174195213249288306327379400454474
Ecartement cGap c
mm85105115125135145165185195215230245255270285320350410475505540625660750780
mm
± 8
± 12
± 20
X 7345
0.070.100.130.1750.200.250.300.400.420.500.570.630.820.880.981.221.452.233.153.674.006.307.2010.211.2
kg
PoidsWeight
X 7341
b
cd
s
b
ad
s
b
cd
s
b
ad
s
b
cd
s
b
ad
s
L
de
d1
e 1
Courbe à souder en tube d’acier sans soudureCourbe 3D 90°Welded steel elbow in steel tubeElbow 3D 90°
NFA 49186 AE 220 A (TU 37 b) - DIN 2605
Courbe à souder en tube d’acier sans soudureCourbe 5D 90°Welded steel elbow in steel tubeElbow 5D 90°
NFA 49186 AE 220 A (TU 37 b) - DIN 2606
Courbe à souder en tube d’acier sans soudureCourbe 3D 90° série gazWelded steel elbow in steel tubeElbow 3D 90° - BSP type
NFA 49186 AE 220 A (TU 37 b)
Réduction à souder en acier sans soudureSteel reducing coupling
NFA 49186 AE 220 A (TU 37 b)
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 20:05 Page147
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
148
Eléments à souder Welding parts
d
mm33.742.448.360.370
76.188.9101.6108
114.3133
139.7159
168.3193.7219.1244.5273
323.9
e
mm2.32.62.62.92.92.93.23.63.63.644
4.54.55.45.96.36.37.1
h
mm4446668888101215152030304040
H
mm1111
11.516.517.518.523
24.525.52632
35.543
44.556
68.5759099
R
mm33.742.44860707689102108114133140159168195220240270320
r
mm4446668888101215152020252833
Fond bombéEnd tube weldedNFA 49185 AE 220 A (TU 37 b)
X 7342
0.030.040.050.100.140.160.240.340.370.420.630.801.221.402.102.903.905.407.30
kg
PoidsWeight
ø extérieurø outside
mm26.933.742.448.360.376.188.9
EpaisseurThickness
mm2.32.32.62.62.92.93.2
Coude à souder en tube d’acier galvaniséCoude 3D 90°Steel steem elbow weldedStem elbow 3D 90° - BSP typeNFA 49186 AE 220 A (TU 37 b) - DIN 2605
X 7341G
0.060.110.200.270.510.811.28
kg
PoidsWeight
LongueurLength
mm
60
80
100
120
150
200
250
300
40
51
20
56
20
70
20
99
20
120
20
160
20
200
30
60
15
85
15
90
15
130
15
135
15
180
15
270
15
270
30
90
15
100
15
160
15
170
15
240
15
320
15
360
15
480
10
130
10
145
10
190
10
250
10
285
10
380
10
510
10
520
10
140
8
230
8
250
8
310
8
375
8
500
8
680
8
750
8
270
8
300
8
350
8
450
8
600
8
800
80
900
9
350
9
360
9
490
9
540
9
850
9
910
9
1080
6
510
6
520
6
620
6
780
6
1300
6
1320
6
1560
6
680
6
720
6
1020
6
1360
6
1690
6
2040
6
1000
6
1008
6
1500
6
2000
6
2440
6
3000
DN
3/8"12-17
1/2"15-21
3/4"20-27
1"26-34
1"1/433-42
1"1/240-49
2"50-60
2"1/266-76
3"80-90
4"102-114
Mamelon double acier noir et galvaniséTube soudé filetage gaz coniqueSteel and galvanized steel double nippleWelded tube taper BSP threadedConditionnement / Packing Poids de la pièce (g) / Weight of piece (g)
530
Demi-mamelon acier noir et galvaniséTube soudé filetage gaz coniqueSteel and galvanized semi nippleWelded tube taper BSP threadedConditionnement / Packing Poids de la pièce (g) / Weight of piece (g)
530 A
LongueurLength
mm
10020
70
15
90
15
160
10
190
8
250
8
300
9
360
6
520
6
680
6
1000
DN
3/8"12-17
1/2"15-21
3/4"20-27
1"26-34
1"1/433-42
1"1/240-49
2"50-60
2"1/266-76
3"80-90
4"102-114
Manchon acier noir et galvaniséSteel and galvanized steel socketNF E-29029Longueur / Length Poids de la pièce (g) / Weight of piece (g)
540
17
15
25
18
26
29
34
62
36
106
43
137
48
189
48
212
56
356
60
492
65
864
83
1797
DN
3/8"12-17
1/4"8-13
1/8"5-10
1/2"15-21
3/4"20-27
1"26-34
1"1/433-42
1"1/240-49
2"50-60
2"1/266-76
3"80-90
4"102-114
Demi-manchon acier noir et galvaniséSteel and galvanized steel semi socketNF E-29029Longueur / Length Poids de la pièce (g) / Weight of piece (g)
540 A
12
10
13
15
17
27
18
40
21
52
24
102
24
120
28
160
30
290
32
330
41
620
DN
3/8"12-17
1/4"8-13
1/2"15-21
3/4"20-27
1"26-34
1"1/433-42
1"1/240-49
2"50-60
2"1/266-76
3"80-90
4"102-114
L
L
L
L
ø
e
dR
e
h
H
r
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:55 Page148
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:55 Page149
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
150
Raccords inox pour industrie
Stainless steel fittingsfor industrie
Raccords série 30003000 lbs fittings Raccords filetés ISO 316
Thread fittings
Accessoires à souderWelded accessories
Raccords à baguesRing unions
FixationsPipes holders
Raccords rapidesQuick couplings
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:55 Page150
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
151
Visserie inox pour industrie
Stainless steel fastenersand bolts for industrie
Vis / Screws- Vis TH, EF, PF / Hexagon head screws (fully and partially threaded)- Vis et écrous moletés / Knurled nuts and screws- Vis et écrous anneaux / Lifting eye bolts and nuts- Vis empreinte creuse / Hexagon socket caps screws- Vis SThc, ST plat, cuvette / Hexagon socket sets screws- Vis ST fendue / Slotted set screws- Vis à tôle fendue TC, TF / Slotted tapping screws- Vis à tôle crue TC, TF / Pozi tapping screws- Vis de forme TC, TF / Head screws
Ecrous / Nuts- Ecrous HU, HM, indesserables / Hexagon nuts- Frein d'écrous / Locking tabwashers
Rondelles / Washers- Rondelle découpée / Stamped washers- Rondelle décolletée / Machine washers- Rondelle freins / Locking washers
Divers / Miscellaneous- Tige filetée / Allthread studding- Goupille fendue élastique / Pins- Circlips / Circlips- Rivet aveugle, plein / Rivets- Accastillage / Marine hardware and hinges
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:55 Page151
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:55 Page152
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:55 Page153
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
154
n Nettoyer les tuyauteries- Avant les essais et le démarrage des installations, procéder
au rinçage abondant des tuyauteries (eau, air, vapeur sicompatible).
- Il est indispensable d’éliminer toutes les particules etobjets divers qui pourraient rester dans les tuyauteries etparticulièrement les «gratons» de soudures qui endom -magent irrémédiablement les portées d’étanchéité de la robinetterie.
n Clean the pipes- Before the tests and starting of the installations, carry
out the abundant rinsing of piping (water, air, steam if compatible).
- It is essential to eliminate all the particles and variousobjects which could remain in the pipes and particularlywelding residues which could definitively damage thevalve seat.
n Nettoyer les portées de joint- Avant montage, veiller à ce que les portées de joint soient
parfaitement propres, exemptes de rayures préjudiciablesà une bonne étanchéité.
n Clean the gasket seat- Before assembling, take care that the gasket seats are per-
fectly clean, free from stripes prejudicial to good tightness.
n Aligner les tuyauteries- Vérifier l’alignement des tuyauteries.- Ne pas compter sur la robinetterie pour récupérer les
mauvais alignements : risque de création de fuites, dedéfaut de manœuvre ou même de rupture.
n Align pipings - Check piping alignment.- Do not rely on the valves to correct bad alignments : risk
of leakage, and operating defect or even of breaking.
n Eviter les « coups de bélier »- Un coup de bélier peut générer une montée en pression
d’une extrême brutalité.- Les dommages causés par un coup de bélier sont consi -
dérables ; papillons de vanne fendus, axes déformés,appareils divers détruits.
- Les causes des coups de bélier sont très variées : le démar-rage de la pompe et la fermeture brutale de vanne sontles plus fréquentes.
n To avoid the « water hammers »- A water hammer can generate a rise in pressure of
extreme brutality.- he damage caused by a water hammer is considerable:
butterfly valve disc splits, axes deformed, destroyedvarious apparatuses.
- The causes of the water hammers are very varied butgenerally: the starting of pump and the sudden closing ofvalve.
n Manutentionner la robinetterie avec précaution- Elinguer les robinets par le corps.- Ne pas s’accrocher au volant ou au servo-moteur.- Attention aux chocs.n Handle the valves with precaution- Sling valves by the body.- Do not hang at the handwheel or the servo-motor.- Attention with the shocks.
n Respecter le sens de montage- Certains appareils de robinetterie sont unidirectionnels
(clapets de non-retour, vannes à guillotine, etc).- Veiller à un montage conforme au sens de la flèche ou aux
instructions de montage.n Respect assembly direction- Some valves are one-way (non-return valve, knife gate
valves, etc).- Take care of an assembly in conformity with the arrow
direction or of the instructions of assembly.
n Supporter les vannes- Dans certains cas (vannes de grande longueur, servo-
moteur lourd), il peut être indispensable de prévoir des supports qui éviteront des tensions préjudiciables à la manœuvre risquant la détérioration rapide des vis demanœuvre et des portées d’étanchéité.
n Support the valves- In certain cases, valves of large length, heavy servo-motor,
it can be essential to provide for supports which will avoid tensions prejudicial with the operating risking thefast deterioration of the stem and of the tightness.
n Respecter les couples de serrage- Il est préjudiciable d’appliquer des couples de serrage
supérieurs au besoin d‘étanchéité.- Ceci peut entraîner des marquages de portées d’étan -
chéité et des usures prématurées, particulièrement pourles portées élastomère (robinets à membrane).
n To respect the tightening torques- It is prejudicial applying higher tightening torque than the
tightness’ needed.- This can create markings on the seats and premature
wears particularly for the rubber seat (diaphragm valves).
n Souder les robinets ouverts- Veiller, lors de la soudure des robinets acier ou inox, à
ce que la position soit ouverte.n Weld valves opened - Take care, when welding steel or stainless valves, that the
position is open.
n Déplacer avec précaution la robinetterie- Veiller au maintien des revêtements et des protections.- Eviter les chocs et les frottements qui, en détruisant
les revêtements, créent des amorces de corrosion.n To handle valve with precaution- Take care of the coatings and protections.- To avoid shocks and frictions which, by destroying the
coatings, create starters of corrosion.
n Stocker les équipements dans de bonnes conditions- Les appareils de robinetterie doivent être stockés à l’abri :. de l’humidité et de la pluie pour éviter la corrosion ;. du vent, du sable pour éviter la pénétration de sable ou
de particules solides dont la présence est catastrophiquepour les portées d’étanchéité et de guidage ;
. du soleil et de la chaleur : ils abiment les revêtements ; ilssont particu lièrement néfastes pour la robinetterie plastique sensible aux ultra-violets.
- Les appareils de robinetterie à portage élastomère doiventtoujours être stockés «entrouverts».
- Les appareils à portée métallique doivent être stockés fermés (sauf spécification particulière) pour éviter la pénétration des particules dans les volumes internes.
- Les robinets à boisseau sphérique doivent être stockés position «ouverte»
- Conserver les appareils de robinetterie avec leurs bouchons plastiques, ne pas oublier naturellement de lesenlever au montage.
n Store the equipment under good conditions- The valves must be stored protected from:. humidity and rain to avoid corrosion;. wind, sand: to avoid the penetration of solid particles
whose presence is catastrophic for the tightness;. sunshine and heat: they damage the coatings, particularly
harmful for plastic valves and fittings very sensitive to theultraviolet.
- Valves with rubber seat must always be stored half- opened.
- The apparatuses with metal seat must be stored closed(except particular specifications) to avoid the penetrationof the particles in internal volumes.
- Ball valves must be stored in open position.- Preserve the apparatuses with their plastic caps which
should be taken away when mounting the valves.
Instructions de montageet d'installation
Assembling instructions
Instructions générales General instruction
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:56 Page154
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
155
Instructions de montageet d'installation
Assembling instructions
Instructions spécifiques / Specific instructionsn Robinets à papillon- Positionner le papillon 1/4 ouvert pour effectuer le montage.- Entrouvrir suffisamment les brides pour ne pas endom mager la manchette.- Serrer progressivement les boulons.- Pour un démontage aval avec amont sous pression voir les préconisations sur notre catalogue.- Les dimensions des brides de tuyauterie doivent être identiques au DN du robinet.- Ne pas utiliser de joints entre le robinet et les brides.n Butterfly valve- Put butterfly in 1/4 open position before carrying out the assembly.- Open sufficiently the flanges not to damage the sleeve.- Tighten the bolts gradually.- For a downstream disassembling with upstream under pressure, see the recommendations in our catalogue.- Dimensions of the pipe flanges must be identical to the DN of the valve.- Do not use gasket between the valve and the flanges.
n Vannes à guillotine- Les vannes sont toujours livrées avec le fouloir de presse-étoupe desserré. Avant toute utilisation, serrer progressi vement
le fouloir de presse-étoupe.- Après mise sous pression du circuit, vérifier les fuites au niveau du presse étoupe et resserrer si nécessaire.- S’assurer de la visibilité de l’indexeur.- Montage en bout de ligne spécifique*.- Respecter les positions de montage*.- Respecter le sens de montage*.- En cas de stockage prolongé ou de faible fréquence de manœuvre, graisser la vis de manœuvre régulièrement.- Veillez au montage du tube de protection de la vis de manœuvre lors de la première installation. La réserve de graisse
de la vis de manœuvre est assurée dans le tube de protection, offrant un graissage régulier.- Lorsqu'un moteur est monté sur une vanne, veiller à graisser la noix du moteur et la tige de la vanne.n Knife gate valve- The valves are always delivered with the loosened packing gland. Before any use, tighten the gland gradually.- After setting under pressure on line, check the leakage on the level of the packing and tighten if necessary.- Be sure that the position indicator is visible.- Assembly in specific end of line*.- Respect the recommended positions of assembly*.- Respect the disassembling direction*.- In the event of prolonged storage or of weak frequency of operation, lubricate the valve stem regularly.- Take care of the assembly of the protection tube of stem at the time of the first installation. The grease reserve
of the stem is ensured in the protection tube, offering a regular greasing.- When assembling of an electric motor on the valve, take care to lubricate the nut of the motor and the stem
of the valve.
n Clapets- Respecter le sens de montage*- Respecter les correspondances de DN entre les clapets et la tuyauterie.- Respecter les distances*.- Respecter les cycles d’utilisations.- Respecter les cycles d'utilisations, éviter les régimes pulsatoires et les utilisations anormales du clapet.n Check valves- Respect the assembly direction*.- Respect the correspondences of DN between the valves and piping.- Respect the distances*.- Respect the pulsatory modes.- Respect the cycles of uses. Avoid the pulsatory flows and the abnormal uses of the check valve.
n Clapets à boule- Pour DN > 250 : montage hors axe avec décalage possible afin de diminuer les coups de bélier lors de la descente
de la boule.- Dans le cas d’un montage horizontal, attention à l’utilisation sous faible charge (fermeture de la boule).- Etanchéité relative sur eau claire.- Sur les clapets à boule, le bouchon de dégazage (en option) permet de décoller manuellement la boule, en régime
de fonctionnement.n Ball check valve- With ball for DN > 250: possible assembly with axis shift in order to decrease the water hammers at the time
of the descent of the ball.- In the case of horizontal assembly, be carrefull on using under low pressure (closing of ball).- Relative thightness on clear water.- On the ball check valves, the degasification screw (in option) makes it possible to take off manually the ball
in operation.
* Voir les préconisations sur notre catalogue / See specifications in our catalog.
n Utilisation- Mettre en service l’installation après que celle-ci ait été contrôlée.- Pour des températures supérieures à 60°C ne pas toucher le corps des
équipements sous pression et prévoir une protection.- Utiliser des brides adaptées.- L'air comprimé utilisé doit être propre, sec et lubrifié selon la norme
ISO 8573-1. Pour les vérins et les électrodistributeurs, utiliser de l'air comprimé conforme à la classe de pureté ISO 8573-1 4/3/4. Pour l'air decontrôle (positionneur pneumatique), utiliser de l'air comprimé conforme à la classe de pureté ISO 8573-1 2/3/3.
n Maintenance et contrôle- Contrôler les vannes annuellement.- Changer les joints après chaque démontage.- Toute opération de maintenance doit être réalisée lorsque l’installation
est à pression atmosphérique.- Couper l’alimentation en énergie des actionneurs.
n Use- To bring into service the installation after control.- For temperatures higher than 60°C do not touch the body of the equipment
under pressure and provide a protection. - To use adapted flanges.- The used compressed air must be clean, dry and lubrificated according to
the standard ISO 8573-1. For actuator and solenoid valve, use compressed airconforming to the purity class of ISO 8573-1 4/3/4. For the air of control (pneumatic positioner), use compressed air conforming to the purity class ofISO 8573-1 2/3/3
n Maintenance and control- Control the valves yearly. - Change the gaskets after each disassembling.- Any maintenance action must be carried out when the installation is
in the atmospheric pressure.- Cut energy supply of the actuators.
Instructions générales / General Instructions
Installation / Installation
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:56 Page155
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
156
Instructions de montageet d'installation
Assembling instructions
≥ 1 mm
n GarantieSauf stipulation contraire et sans préjudice des dispositions sur la garantielégale, TECOFI offre une garantie de douze mois à compter de la mise à disposition des produits dans ses locaux. Elle couvre uniquement la réparation des matériels reconnus défectueux. Le client doit aviser TECOFI par écrit des vices imputés au matériel et fournir toute justificationà ce sujet.La garantie ne s'applique pas :- aux éléments qui par la nature de leurs matériaux ou de leur fonction,
subissent une usure ;- en cas de détérioration ou d'accidents qui proviendraient :. d'une modification ou intervention sur le produit d'origine,. du non respect des notices d'installation, d'utilisation, de maintenance,. de défaut de surveillance, de stockage ou d'entretien,. d'une installation ou d'une utilisation non-conforme aux règles de l'art ;- en cas de non paiement.
n Déclaration de conformité CELes produits marqué CE sont conformes à la directive 97/23/CE.
n Etiquette signalétiqueFabrication : année de fabrication. TS : domaine de température en C°.DT : date du test. N° de série : numéro de série.DN : diamètre nominal. Gr : groupe de produitPS : pression de service en bars. PT : pression de test en bars.
n GuaranteeUnless otherwise advised and without prejudice to the legal guarantee,TECOFI offer a guarantee of twelve months from the date of placing thegoods at disposal in our premises. It covers only the repairing of the goodsstated defective. The customer must inform TECOFI by letter of attributedvices on the goods and supply any justification on the subject .The guarantee does not apply to:- the components, which by their materials nature or by their function
suffer erosion;- in case of deterioration or accidents caused by:. any modification or intervention on the original product,. the no-respect of the installation, the use or the maintenance
instructions,. any defect on supervision, in storage or maintenance,. an installation or use not in accordance with the book;- in case of no-payment.
n EC with conformity declarationThe products marked EC are in conformity with directive 97/23/CE.
n NameplateManufacturing: Year of manufacture. TS: Working temperature in °C. DT: Testing date. N° series: Serial number. DN: Nominal diameter. Gr: Product group.PS: Working pressure in bars. Pt: Pressure of test in bars.
Instructions spécifiques / Specific instructions
n Clapets simple battant- Monter le clapet en utilisant le crochet pour la préhension.- Lors d’un montage horizontal l’axe du crochet matérialise l’axe vertical de la tuyauterie.n Sandwich check valve- Mount the valve by using the hook.- In the case of horizontal assembly, hook axis materializes vertical position of piping.n Clapets double battant- S'assurer du bon fonctionnement des ressorts de rappel.- DN > 150 : montage sur fluide descendant interdit.- Lors d'un montage horizontal, l'axe du clapet doit être vertical.n Dual check valve- Insure the correct operation of the return springs.- DN > 150: assembly is prohibited with downward fluid.- At the time of a horizontal assembly, the axis of the check valve must be vertical.
n Robinets à boisseau sphérique- Maintenir le robinet ou l’entraîner en rotation du côté du vissage seulement : par le 6 pans ; au moyen d’une clé
plate ou d’une clé à molette :- Éviter d’utiliser des pinces ou des clés à griffes qui peuvent détériorer le revêtement externe.- Ne jamais pincer les corps des robinets dans un étau.- Serrer modérément l’appareil de robinetterie ou le raccord. Ne pas bloquer avec des rallonges de clé (rupture
des abouts ou déformation permanente du corps).- D’une manière générale et pour toute la petite robinetterie équipant le bâtiment, ne pas dépasser le couple
de 30 Nm à l’occasion d’un serrage.- Lors d’un pré-montage, le robinet ne doit pas supporter la tuyauterie.- Sauf en cas de nécessité absolue, ne pas démonter les éléments des appareils de robinetterie neufs. Chaque
appareil a subi les épreuves hydrauliques ou pneumatiques de réception qui garantissent un assemblage correctdes éléments et l’étanchéité de l’ensemble.
- Le raccordement d’un robinet à boisseau sphérique étant généralement assuré par un filetage «GAZ», étanchedans le filet (filetage du tube conique, filetage du manchon cylindrique), ces filetages doivent répondre aux prescriptions de la norme NF E 03-004, elle-même conforme à ISO/R7. Toutefois, les longueurs taraudées des manchons étant souvent plus petites que les longueurs théoriques ISO/R7 - ainsi que l’admet la norme NF E 03-004 - il est indispensable :
. de limiter la longueur filetée du tube ;
. d’employer un produit (ruban PTFE ou similaire) assurant l’étanchéité du raccordement ;
. de vérifier que l’extrémité du tube ne bute pas sur l’épaulement du siège (jeu obligatoire : 1 mm minimum).n Ball valve- Maintain the valve or drive it in rotation only on the screwed side: by the 6 sides end with a plane wrench
or an adjustable wrench.- Avoid using grips or hook spanners which can damage the external coating.- Never grip the valve bodies in a vice.- Tighten moderately, when screwing, valves and fittings.- Not to block with extensions of key (breaking of the butts or permanent buckling of the body).- In a general manner, and for all the small valves and fittings equipping the building, not to exceed
the tightening torque of 30 Nm.- In the beginning of mounting period, the valve should not support the piping efforts.- Except in the event of peremptory necessity, not to dismount the elements of the new valves. Each apparatus
underwent the hydraulic or pneumatic tests of reception which guarantee a correct assembly of the elementsand the whole tightness.
- Connection of a ball being generally ensured by a threading «BSP», tight in the threads (threading of the conicaltube, threading of the split coupling), these threads must answer the criteria of standard NF E 03-004, itself conforms to ISO/R7. Nevertheless, the tapped lengths of the sleeves being often smaller than theoreticallengths ISO/R7, which the standard NF E 03-004 permits, it is essential:
. limit the threaded length of the tube,
. use a product (PTFE ribbon or similar) ensuring connection tightness,
. check that the tube extremity does not butt against the shoulder of the seat (obligatory clearance: 1mm minimum).
Installation / Installation
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:56 Page156
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
157
DEFINITIONSauf dérogation explicite, écrite et approuvée parTECOFI, ces conditions constituent la base juridique ducontrat entre TECOFI et l’entité, dénommée ci-après« le client », au titre de la fourniture de produits et/ouservices que ce contrat concerne. Elles se substituent àtoutes autres conditions, notamment d’achat, émanantdu client, auxquelles celui-ci ne peut se référer ni seprévaloir.Ces conditions s’appliquent aux relations entre TECOFIet le client, dans le respect des Lois et Règlements,français et communautaires (Union Européenne), et,pour ce qui concerne l’exportation, dans le respect desrègles appliquées valablement sous l’égide del’Organisation Mondiale du Commerce.
PUBLICITE - VALIDITECes conditions générales de Vente et de Garantie sontportées à la connaissance du client avant la conclusiondu contrat, de manière explicite, et acquièrent force deloi entre TECOFI et le client par la signature du contratde vente par le client, (le cas échéant « bon de com-mande »). Le contrat n’est réputé parfait qu’à la suited’une acceptation écrite, explicite et formelle deTECOFI, sous forme d’accusé de réception de comman-de. L’accusé de réception de commande sera transmissystématiquement au client pour les montants le justi-fiant et pourra l’être éventuellement sous forme defacture proforma.
LIMITESLe contrat sera strictement limité aux fournitures etprestations exclusivement et expressément mention-nées par les parties, à partir des données fournies parle client. TECOFI se réserve le droit de fournir lui-même, ou de sous-traiter tout ou partie des études,fournitures et prestations objets du contrat, ainsi quede substituer celles-ci par des fournitures et prestationséquivalentes, à condition qu’il n’en résulte ni une aug-mentation du prix, ni une altération de la qualité pourle client.
MODIFICATIONToute modification du contrat demandée par le clientdoit faire l’objet de l’acceptation expresse de TECOFI,et doit donner lieu à établissement d’un avenant aucontrat.
REPRISE – RESILIATIONTECOFI n’est pas tenu de reprendre le matériel neufqui lui serait retourné. Aucune commande ne peutêtre annulée sans l’accord explicite, écrit et préalablede TECOFI. Dans le cas d’une annulation de commandeacceptée par TECOFI, le client indemnisera celui-ci detous les frais consécutifs à cette annulation, pour unmontant qui ne pourra être inférieur à 30% du mon-tant hors taxes de la commande annulée.
PROPRIETE DES ETUDES, PLANS & DOCUMENTSLes plans, photos, poids, prix, et d’une manière généra-le, tout renseignement figurant dans les catalogues,prospectus et tarifs de TECOFI sont donnés à titre indi-catif et non contractuel. TECOFI se réserve le droit d’yapporter toute modification sans préavis. Ils ne peu-vent être invoqués, à aucun moment, par le client àl’encontre de TECOFI.Tous les droits sur les éléments de propriété intellec-tuelle et de savoir-faire incorporés dans les documentstransmis, les produits livrés et les prestations livréesdemeurent la propriété de TECOFI, sauf conventionécrite, expresse et explicite, incluse dans le contrat devente ; toute cession de ces droits, même à titre gra-tuit, doit faire l’objet d’une convention dans les condi-tions précisées ci-dessus. Toute reproduction de ces élé-ments, effectuée par le client ou de son fait, nécessiteun accord écrit préalable de TECOFI. Toute étude faiteà la demande du client par TECOFI, non suivie d’unecommande, feront l’objet du paiement par le client desfrais qu’ils auront engendrés, et, demeurant la proprié-té de TECOFI, lui seront restitués par le client.
PRIXLes prix, fixés par TECOFI au moment de l’acceptationde la commande, s’entendent, sauf convention expres-se et explicite contraire, hors taxes, hors frais de dos-siers techniques et de certificats, d’emballage, detransport et d’assurance.TECOFI se réserve le droit de réviser ses prix, en cas devariation du cours des matières premières, de modifica-tion des cours de changes concernés, évolution de lalégislation s’appliquant à l’échange, ou de tout autremotif légitime et justifié.
CONDITIONS DE PAIEMENTDans le respect de la loi N°2008-776 du 04/08/2008 dela modernisation de l’économie, le délai maximumappliqué est de 45 jours fin de mois ou 60 jours. Dansle cas de non respect de l’échéance, en application del’article L441-5 et L441-6 du code du commerce, uneindemnité forfaitaire de 40 euros sera appliqué commefrais de recouvrement. Les paiements sont effectuéssans escompte, sauf convention contraire expresse etexplicite. Le règlement est réputé réalisé à la date demise à disposition effective des fonds par le client aubénéfice de TECOFI.Les dates de paiement convenues contractuellementne peuvent être remises en cause unilatéralement parle client, même en cas de litige avec TECOFI. Toutretard de paiement entraînera l’application d’un inté-rêt de retard tel que fixé par le taux de refinancementde la Banque Centrale Européenne alors applicable,majoré de sept points.
RETARD DE PAIEMENT Tout retard de paiement donnera lieu à une factura-tion d’intérêt de retard au taux de 3 fois le taux de l’in-térêt légal. Tout retard de paiement d’une échéance,ou dégradation de la situation financière du clientconstatée par un établissement bancaire ou financier,entraîne la déchéance du terme contractuel, la totalitédes sommes restant dues étant immédiatement exigi-ble, et ceci sans préjudice pour TECOFI de l’applicationde la clause de réserve de propriété ci-dessous stipulée.De même, en cas de retard de paiement par le client,TECOFI dispose d’un droit de rétention sur les produitsrestant à livrer, jusqu’à parfait paiement par le clientde la totalité des sommes devenues exigibles.Le client s’interdit toute pratique illicite de débit oud’avoir d’office, de compensation non contractuelle-ment établie explicitement, et d’une manière généralede facturer au fournisseur toute somme qui n’auraitpas été expressément reconnue par ce dernier au titrede sa responsabilité.
DELAI DE FOURNITURELe délai de mise à disposition mentionné dans lecontrat est indicatif, sauf indication contraire stipuléecomme telle dans le contrat de vente. Ce délai contrac-tuel s’entend : date de mise à disposition avant recettedu matériel dans les magasins de TECOFI. Ce délaicourt à partir de la réception par TECOFI des docu-ments et informations émanant du client, et nécessai-res à la bonne exécution de la commande, ainsi quedes acomptes devant être réglés à la commande.Un retard de livraison ne pourra entraîner la résilia-tion, même partielle, du contrat, ni à l’application depénalités de retard. Tout retard de livraison imputé auclient pourra induire des stockages et manutentionsaux frais et risques exclusifs de l’acheteur.
RESERVE DE PROPRIETEEn application des lois n°80-335 du 12 mai 1980, et du25 janvier 1995, et du Code du Commerce, articleL621.122, alinéa 2, TECOFI conserve l’entière propriétédes biens prévus au contrat, jusqu’au paiement effectifpar le client de l’intégralité des éléments du prixcontractuel, en principal et en accessoires. Un seulretard de paiement par le client de l’une quelconquedes échéances pourra entraîner la revendication parTECOFI de ses biens. En cas de revendication de sesbiens par TECOFI, le client est tenu de restituer, à sespropres frais, les biens revendiqués par TECOFI. Laréserve de propriété s’applique à tout bien ou produittransformé par le client, dans le cadre d’un usage nor-mal dudit bien.
RECEPTION TECHNIQUE, INSPECTIONS, ESSAIS, CERTIFICATSToutes ces opérations sont demandées par le client, etexécutées à ses frais. Elles s’effectuent en usine, ou entout autre lieu choisi par TECOFI. Si le client, régulière-ment prévenu de la date et du lieu de ces opérations,ne s’y présente pas, il est alors dressé un procès-verbalpar TECOFI, constatant l’absence du client, et à luiadressé par TECOFI. La réception ou l’opérationconcernée sera alors réputé avoir eu lieu.La durée des procédures de vérification et d’accepta-tion des marchandises est fixée conformément auxbonnes pratiques et usages commerciaux et, pour toutétat de cause, n’excède pas 30 jours à compter de ladate de réception des marchandises ou de la réalisa-tion de la prestation des services, à moins qu’il en soitexpressément stipulé autrement dans le contrat etpourvu que cela ne constitue pas une clause ou pra-tique abusive de l’article L442-6 du code du commer-ce.
EMBALLAGE, LIVRAISON, TRANSPORTEn l’absence de demande spécifique formulée par leclient, et prévue dans le contrat, la nécessité d’unemballage et sa consistance restent à la libre apprécia-tion de TECOFI. Les frais d’emballage sont toujours àla charge du client, les emballages ne sont pas reprispar TECOFI. Les conditions de livraison contractuellessont régies par les « incoterms » en vigueur à la datede conclusion du contrat. En l’absence de condition delivraison spécifiquement convenue au contrat, la livrai-son est réputée « départ ». A compter de la mise àdisposition, le client assume seul la responsabilité desdommages que les fournitures pourraient subir ouoccasionner. La livraison, quand elle intervient, esteffectuée sous la responsabilité du seul client.
INSTALLATION, MISE EN PLACECes opérations sont réalisées par le client, sous sa seuleresponsabilité, et doivent être effectuées selon lesrègles de l’art.
GARANTIESauf stipulation contraire, et sans préjudice de l’obliga-tion de garantie légale, ou en raison du vice caché, enapplication de l’article 1641 du Code Civil, TECOFIoffre une garantie de douze mois à compter de la miseà disposition des fournitures dans ses locaux, telle queci-dessus définie. Cette garantie couvre uniquement laréparation des matériels reconnus défectueux. Pourmettre en œuvre cette garantie, le client doit aviserTECOFI par écrit des vices imputés au matériel, et enfournir toute justification. La garantie ne s’applique pas aux éléments qui, par lanature de leur matériaux ou de leur fonction, subissentune usure naturelle ; aux cas de détérioration ou d’ac-cident qui proviendraient d’une modification ou inter-vention sur le produit d’origine, ou du non-respect parle client des notices d’installation, d’utilisation ou demaintenance, ou encore du défaut de surveillance, destockage ou d’entretien, ou encore du fait de la négli-gence du client, ou en raison d’une installation oud’une utilisation non conforme aux règles de l’art, oudétournée de son objet habituel, ainsi qu’en cas denon-paiement ou de paiement imparfait par le client.
RESPONSABILITETECOFI exclut expressément toute responsabilité de sapart, au titre de dommages matériels et/ou immaté-riels, directs ou indirects, et toute réparation de toutpréjudice financier découlant notamment d’une perted’exploitation ou de bénéfice, de la privation d’undroit, interruption d’un service rendu par une person-ne ou un bien, pour autant que cette exclusion soitcompatible avec les dispositions légales en vigueur, aucaractère impératif ou d’ordre public. La responsabilitécivile de TECOFI, toutes causes confondues, à l’excep-tion des dommages corporels directs et de la fautelourde de sa part, est limitée au montant des sommesperçues au titre du contrat de vente.
FORCE MAJEURENul ne peut être tenu pour responsable d’une consé-quence quelconque d’un événement survenu dans lecadre de la force majeure, au sens de l’article 1148 duCode Civil, et du respect de son interprétation jurispru-dentielle par les juridictions françaises. La partie quientend se prévaloir de la force majeure en avisera sansdélai l’autre partie par écrit de tout événement dontelle aurait ainsi connaissance, de nature à affecterl’exécution du contrat.
CLAUSE RESOLUTOIRELa résiliation du contrat, pour quelque cause que cesoit, ne porte pas atteinte aux créances déjà échues. Lecontrat pourra être résilié par TECOFI, dans le cas où lepaiement n’interviendrait pas dans les huit jours sui-vant l’expédition par lui-même d’une mise en demeurede payer. Le contrat pourra être résilié, dans le cas oùl’exécution du contrat aura été rendue impossible parla survenance de la force majeure, telle que ci-dessusdéfinie, sans qu’il soit nécessaire de faire prononcercette résiliation par voie de justice.
ATTRIBUTION DE JURIDICTIONSeul le droit français s’applique aux litiges nés d’uncontrat de vente relevant des présentes conditionsgénérales de vente et de garantie. Tout litige relatif àune fourniture ou à son règlement, indépendammentdes conditions contractuelles de vente et/ou de règle-ment, et ce même dans les cas d’appel en garantieet/ou de pluralité de défendeurs, sera porté devant leTribunal de commerce du ressort du siège de TECOFI, àl’exclusion de toute autre juridiction, sauf de pleindroit.
CONDITIONS GENERALES DE VENTE ET DE GARANTIE
Toute communication ou reproduction de ce document, sous quelque forme que ce soit, et toute exploitation ou communication de son contenu, sont interdites, sauf autorisation écrite expresse.Tout manquement à cette règle est illicite et expose son auteur au versement de dommages et intérêts. Tous droits réservés pour le cas de la délivrance d’un brevet, d’un modèle d’utilité ou d’unmodèle de présentation. Les photographies et les illustrations techniques ne sont pas contractuelles. Les spécifications des produits présentés sont susceptibles de modifications sans avis préalable.TECOFI est une marque déposée / Viton®, Neoprène®, Butyl® et Hypalon® sont des marques déposées par DuPont de Nemours.
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:56 Page157
83, rue Marcel Mérieux - 69960 CORBAS - FRANCETél. +33 (0)4 72 79 05 79 - Fax +33 (0)4 78 90 19 19 +33 (0)4 72 79 05 70E-mail : [email protected] - www.tecofi.fr
158
DEFINITIONExcept where otherwise expressly waived in writingand approved by TECOFI, these terms and conditionsconstitute a legal base for the agreement betweenTECOFI and the entity, referred to hereinafter as«Customer», for the supply of products and/or servicescovered under this agreement. These terms and condi-tions replace any other terms and conditions, specifi-cally purchase terms and conditions issued byCustomer, which may make no reference or claim the-reunder.These terms and conditions apply to the relations bet-ween TECOFI and Customer in compliance with Frenchand European Union Laws and Regulations and, withrespect to exports, in compliance with the validly appli-cable rules prescribed by the World TradeOrganization.
ADVISEMENT- VALIDITYThese General Sales and Warranty Terms andConditions are explicitly made known to Customerprior to entering into the agreement and acquire forceof law between TECOFI and purchaser by means ofCustomer’s signature to the sales agreement (or «orderform», as applicable). The agreement is solely deemedcomplete after formal explicit acceptance in writing byTECOFI in the form of an order acknow - ledgment.The order acknowledgment will be systematically sentto Customer specifying corresponding amounts andmay be issued in the form of a pro-forma invoice.
LIMITSThe agreement will be strictly limited to the suppliesand services exclusively and expressly specified by theparties on the basis of information supplied byCustomer. TECOFI reserves the right to provide the sup-plies itself or to subcontract all of part of the studies,supplied and services covered under this agreement,and to substitute them with equivalent supplies andservices, provided that such substitution results in noincrease in price or alteration of quality for Customer.
MODIFICATIONAny modification to the agreement requested byCustomer must be expressly approved by TECOFI andan amendment to the agreement must be made.
RETURNS - CANCELLATIONSTECOFI is not required to take back new equipmentreturned to TECOFI. No order may be cancelledwithout express prior approval in writing by TECOFI. Inthe event of cancellation of an order accepted byTECOFI, Customer will compensate TECOFI for anycosts incurred in such cancellation in an amount thatmay not exceed 30% of the pre-tax amount of the can-celled order.
OWNERSHIP OF STUDIES, DRAFTS & DOCUMENTSDrafts, photos, weights, prices and, more generally,any information appearing in TECOFI catalogues, bro-chures and price lists are provided for information pur-poses and are not contractually binding. TECOFI reser-ves the right to make any changes without notice. Noclaims regarding such changes may be made byCustomer against TECOFI at any time.All components protected by intellectual property andknow-how rights included in documents conveyed,products supplied and services provided remain theproperty of TECOFI, except where otherwise expresslyand explicitly agreed in writing and included in thesales agreement; any transfer of such rights, even on afree-of-charge basis, must be covered in an agreementunder the conditions stipulated hereinabove.Any reproduction of such components made or ena-bled by Customer requires prior approval in writing byTECOFI. Any study undertaken by TECOFI at therequest of Customer not followed-up by an order willbe subject to payment by Customer of the costs incur-red by such study, which will remain the property ofTECOFI and as such, must be returned to TECOFI byCustomer.
PRICESThe prices set down by TECOFI at the time of acceptanceof orders, except where expressly and explicitly agreedto otherwise, are quoted exclusive of tax and exclusiveof costs of technical files, certificates, packaging, ship-ping and insurance.TECOFI reserves the right to adjust its prices in the eventof a variation in the costs of raw materials, modificationin exchanges rates involved, evolution of legislationapplicable to the transaction or any other legitimateand warranted cause.
PAYMENT TERMSComplying with law N°2008-776 of 04/08/2008 aboutthe modernization of the economy, the maximumterm of payment is 45 days at the end of the month or60 days. In the case of a deadline not being met, pur-suant to article L441-5 and L441-6 of the FrenchCommercial Code (Code du Commerce), a flat-ratecompensation of 40 euros is to be applied as a recoverycharge.Payment are to be made without discount, exceptwhere expressly and explicitly agreed to otherwise byTECOFI. Payment is deemed made at the date at whichfunds are effectively made available to TECOFI byCustomer.
PENALTY FOR DELAYAny delay in payment, compared to the time of settle-ment, will result in a charge of interest at the rate of 3times the rate of interest. Contractually agreed pay-ment dates may not be unilaterally modified byCustomer, even in the event of dispute with TECOFI.Any delay in payment will be subject to the applicationof late penalty fees at the rate applicable by theEuropean Central Bank at the time of late paymentplus seven points. Any delay in payment of an instal-ment or deterioration of Customer’s financial situationofficially ascertained by a banking or financial institu-tion will be deemed an event of default and allamounts remaining dues will become immediatelypayable without prejudice for TECOFI’s right to applythe title retention clause stipulated hereinbelow.Further, in the event of delay in payment by Customer,TECOFI has the right to hold back products remainingto be supplied until fill payment by Client of allamounts that have become payable.Customer shall refrain from making any automatic illi-cit debits or credits, offsets not explicit set down bycontract and, more generally, from invoicing supplierfor any amount that has not expressly acknowledgedby supplier as falling under its liability.
DELIVERY TERMSThe time required to make supplies available set downin the agreement is for information purposes only,except where stipulated otherwise in the sales agree-ment. Said contractual delivery time means the date atwhich supplies are made available prior to acceptanceat TECOFI’s warehouses. Said time commences as fromthe receipt by TECOFI of documents and informationissued by Customer required to properly fill the orderand of the remittance of payments on account for theorder. A delivery delay may not result in the termina-tion, even partially, of the agreement or the applica-tion of late penalty fees. Any delivery delay imputed tothe Customer can mean stocking and handling feesand risks exclusively to the expenses of the Customer.
TITLE RETENTIONPursuant to French Act 80-335 of 12 May 1980 and theAct of 25 January 1995, and of Section L.621;22, §2, ofthe French Business Code, TECOFI retains full owners-hip over the goods provided for under this agreementuntil full payment has been made by Customer of thecontracted price, both the principal and ancillary char-ges. A single delay by Customer in making payment ofany instalments whatsoever may result in the recoveryby TECOFI of its property. In the event of claim byTECOFI to recover its property, Customer is required, atits expense, to return the property claimed by TECOFI.Title retention applies to any property or productconverted by Customer under normal use of such pro-perty.
TECHNICAL ACCEPTANCE, INSPECTIONS, TESTING, CERTIFICATESAll of these operations are requested by Customer andcarried out at Customer’s expense. They are conductedat the plant or at any other location chosen by TECOFI.In the event that Customer has been duly notified ofthe date and location of said operations and does notappear, an official report is drawn up by TECOFI recor-ding Customer’s absence and sent to Customer byTECOFI. Acceptance or the operation involved will the-reafter be deemed as having been implemented.The duration of the verification procedures and accep-tance of goods is applied in accordance with goodcommercial practice and, in any event, does not exceed30 days, including the date of receipt of goods or theimplementation of service delivery, unless it is explicitlystipulated otherwise in the contract and provided thatthis does not constitute a clause or abusive practice ofarticle L442-6 of the French Commercial Code.
PACKAGING, DELIVERY, SHIPPINGUnless specifically requested by Customer and providedfor under the agreement, the need for packaging andthe make-up thereof remain at the entire discretion ofTECOFI. Packaging costs are always assumed byCustomer and packaging will not be taken back byTECOFI. Contractual delivery terms are governed underthe Incoterms in force at the time at which the agree-ment is entered into. In the event that no deliveryterms are specifically provided for under the agree-ment, delivery is deemed as «ex works». Once suppliesare made available, Customer assumes fill liability forany damage that the supplies may sustain or cause.Delivery, when made, is made under the sole liabilityof Customer.
INSTALLATION, SET-UPThese operations are carried out by Customer, underCustomer’s sole liability, and shall be implemented incompliance with standard practices.
WARRANTYExcept where stipulated otherwise and without preju-dice to the obligation of legal warranty or warrantyfor hidden defects provided for under Section 1641 ofthe French Civil Code, TECOFI provides a twelve-monthwarranty from the date at which supplies are madeavailable at its facility as described above. Said warran-ty solely covers the repair of materials recognised asdefective. For application of the warranty, Customermust inform TECOFI in writing of the defects claimedwith respect to the supplies and provide proof thereof.The warranty does not apply:- to items which, by the nature of their materials orfunction, undergo natural wear and tear;- to occurrences of deterioration or accident resultingfrom a modification or operation on the original pro-duct or from non-compliance by Customer with instal-lation, utilisation or maintenance instructions or fromlack of supervision, storage or cleaning or from negli-gence of the part of Customer or from installation oruse that is non-compliant with standard practices orfrom use for purposes other than which the product isintended and in the event of non-payment of insuffi-cient payment by Customer.
LIABILITYTECOFI expressly declines any liability on its part withrespect to material damage and/or intangible losses,whether direct or indirect, and any remedy for anyfinancial consequences, specifically in connection withoperating losses or loss of profits, loss of a right, inter-ruption of a service rendered by a person or thing, pro-vided that this exclusion is compatible with legal provi-sions currently in force of a compulsory or nonexempti-ble nature. TECOFI’s civil liability on overall claims,except for direct bodily injury resulting from grossneglect on its part, is limited to the amounts collectedunder the sales agreement.
FORCE MAJEURENo one may be held liable for any consequence what-soever of an act of God as defined under Section 1148of the Civil Code and pursuant to Judicial interpreta-tion given by French Courts. The party that intends toclaim the occurrence of an act of God will notify theother party of such in writing of any event that to itsknowledge may affect performance of the agreement.
TERMINATION CLAUSETermination of the agreement for any cause whatsoe-ver has not effect on outstanding amounts payable.The agreement may be terminated by TECOFI in theevent that payment is not made within eight days ofthe date at which TECOFI has sent a formal order topay. The agreement may be terminated in the eventthat performance of the agreement has been madeimpossible by the occurrence of an act of God, as defi-ned above, in which event the agreement may be ter-minated without a ruling by the Court.
COURT JURISDICTIONSolely French law is applicable to disputes arising inconnection with a sales agreement covered under thegeneral sales and warranty terms and conditions. Anydispute in connection with supplies or the paymentthereof, irrespective of contractual sales terms and/orpayments, even in the event of third-party proceedingsor multiple respondents, will be referred to theCommercial Court having jurisdiction over the registe-red office of TECOFI, to the exclusion of any otherCourt jurisdiction except by right of law.
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment ofdamages. All rights reserved in the event of the grant of a patent, utility model or design. The photographies and technical art works are not contractual. The specifications of the presented products are open to modi-fications without previous advice.TECOFI is a registered trademark / Viton®, Neoprene®, Butyl® and Hypalon® are registered trademarks by DuPont de Nemours.
GENERAL SALES AND WARRANTY TERMS AND CONDITIONS
TECOFI-VOL2_FR-p113-158_CATAL_FABRICANT.qxd 27/06/13 14:56 Page158