Upload
monibro
View
221
Download
0
Embed Size (px)
Citation preview
8/2/2019 Brick Machinary
1/10
T O N A N G E B E N D I N E X T R U S I O N U N D A U F B E R E I T U N G L E A D I N G I N E X T R U S I O N A N D P R E P A R AT I O N
SCOPE OF SUPPLY
MACHINERY AND
EQUIPMENT FOR THE BRICKAND TILE INDUSTRY
8/2/2019 Brick Machinary
2/10
for feeding, proportioning, buffering and storing raw
materials. Models with 1.0/ 1.25/ 1.5/ 2.0/ 3.0-m beltwidths and 2 - 12-m axle centers. To deal with all the
plethoric functions and fields of application, HNDLE
builds three basic types of box feeders: rubber-belt
box feeders (BKG), standard-type box feeders (BKN)
and heavy-duty box feeders (BKSS).
TYPE BKG
TYPE BKN
TYPE BKSS
Box feeders - invented by HNDLE in 1902 and constantly improved ever
since - are the classical machine for feeding and proportioning material inbulk.
D E L IV E R Y P R O G R A M M
for discharging and proportioning problematic body:
E-series with 4/ 8 or 12 augers, sliding bot-toms,
discharge and comminuting paddles, and separate,
variable-speed drives.
for eliminating hard foreign matter in pit material con-
taining a large proportion of stones. With mechanical
(WSB) or hydraulic (WSBH) drive, reversible crushing
rollers and hydraulic-actuated ejector rake. Roller dia-
meters / lengths of 800 / 1590 and 800 / 1800 mm.
TYPE WSB
TYPE WSBH
EVEN FEEDERS
STONE-ELIMINATING
CRUSHERS
BOX FEEDERS
2
8/2/2019 Brick Machinary
3/10
for eliminating roots, stones, pieces of plastic,
metal, etc., with simultaneous intensive mixing
and homogenization. Mixing trough widths / lengths
of 630 / 870, 1290/ 1050 and 1330 / 1400 mm.
Volumetric throughputs up to approx. 75 m3/h.
TYPE MDSG
for preliminary crushing of cloddy and hard raw materi-
als and inclusions with relative Mohs' hardness levels
up to 6. With mechanical (WMM) or hydraulic (WMH)
drive. Seven sizes with roller diameters of 300 - 920 mm
and roller lengths of 1200 and 1860 mm. Volumetric
throughput peaks at about 250 m3/h, depending on the
roller gap.
TYPE WMM
TYPE WMH
for eliminating hard foreign matter from
plastic / soft clay. Available in three sizes, typeWS, with ejector rake eliminating rollers. Roller
diameters/ widths of 500/ 900, 500 / 1200 and
500/ 1800 mm.
TYPE WS
3
DOUBLE-SHAFTSCREENING MIXERS
CRUSHING ROLLERS
STONE-ELIMINATING ROLLER MILLS
8/2/2019 Brick Machinary
4/10
Duo is for crushing, mixing, homogenizing and moi-
stening soft to hard materials. Four sizes with runnerdiameters between 1800 and 2100 mm and runner
widths of 600 800 mm, grinding track areas of 10.6
16.7 m2. Compact volumetric throughput up to approx
90 m 3/h.
Quadro is for crushing, mixing and moistening pla-
stic to semi-stiff raw materials. Type HMIQ 2070c with
4 runners, each 2100 mm in diameter and 700 mm
wide, and a grinding track area of 16.7 m2. Compact
volumetric throughput up to approx. 120 m3/h.
TYPE HMI
TYPE HMIQ
D E L IV E R Y P R O G R A M M
for crushing semi-stiff to hard materials. Type WSL,
available in four different sizes, with 450 mm impact
roller diameter, 800 mm feed roller diameter, and roller
widths of 600, 800, 1000 and 1200 mm. Volumetric
throughput peaking at approx. 100 m3/h, depending on
the size of the feed and on the width of the roller gap.
TYPE WSL
for preliminary crushing and fine grinding down to a
0.7-mm roller gap. Type WF available in three sizes
with roller barrel diameters/ widths of 1000 / 800,
1000 / 1000 and 1000/ 1200 mm. Max. volumetric
throughput approx. 65 m3/h.
TYPE WF
DESTINTEGRATORS
FINE ROLLER MILL BETA
MIXING WET PAN MILLS
4
8/2/2019 Brick Machinary
5/10
for mixing and homogenizing process body, for
merging and blending waste material with
aggregates, and for buffering and proportioning.
BRSH 12a for low throughputs
BRSH 15a for medium throughputs
BRSH 19b for high throughputs and for crus-
hing materials up to 3 Mohs in the model variant
BRSHB 19a.
TYPE BRSH
TYPE BRSHB
for controlled superfine grinding, with hydrauli-
cally prestressed roller and central gap adjust-ment. Type WFZH, in four sizes with roller dia-
meters of 800 mm and 1000 mm and widths
up to 1500 mm. Max. volumetric throughput of
84 m3/h.
TYPE WFZH
5
CIRCULAR SCREEN FEEDERS ANDSCREENING/CRUSHING MIXER
FINE ROLLER MILLALPHA II
8/2/2019 Brick Machinary
6/10
for extruding soft and semi-stiff ceramic body. Nine
sizes with barrel diameters of 250 - 650 mm.
Volumetric throughputs up 90 m3/h, for extrusion pres-
sures up to approx. 50 bar, depending on the barrel
diameter.
TYPE E
The future is now - with the Futura II combined de-airing extrusion machine,
HNDLE is proffering a product that far surpasses the sum of its features.
D E L IV E R Y P R O G R A M M
HNDLE builds a wide variety of extruders and vacu-
um extruders for low throughput rates in laboratory
and shop at extrusion pressures up to 30 bar. Such
combined de-airing extrusion machines serve equally
well for conventional silicate-ceramic and pasty com-
pounds of diverse provenance.
TYPE PZG
COMBINED DE-AIRING EXTRUSIONMACHINE FUTURA
COMBINED DE-AIRINGEXTRUSION MACHINEFUTURA II
6
for blending, intensively mixing, moistening and
steam heating ceramic body before, during orafter comminution. Four sizes, with mixing
trough widths/lengths of 700/ 3000, 1000 / 4000,
1200 / 4500 und 1400 / 5000 mm. Volumetric
throughputs up to approx. 120 m3/h.
TYPE MDG
DOUBLE-SHAFT MIXERS
8/2/2019 Brick Machinary
7/10
for use in laboratories, research facilities and
short-series production. Including extruder, pri-
mary pug mill and a vacuum pump, all mounted
ready for service on a common base. Extruder
with 80-mm barrel diameter, for extrusion pres-
sures up to 200 bar.
TYPE PZVM
for turning out standard roofing tiles and speci-
als / complementaries. Fully automated system
with one top and two bottom press molds.
Extrusion pressures between 1500 and 2000 N.
Working stroke of 300 - 430 mm, depending on
the height of the mould group.
TYPE WEGA
We rely on extruders from our American partner, J.C.
Steele, for the stiff extrusion of faade bricks / tiles
and for use in pelletizing powdered coal or metal: the
legendary Steele 90 is the world's most powerful
vacuum extruder for stiff extrusion. It comes in five
sizes for throughputs up to 90 t/h.
VACUUMEXTRUDERS FORHIGH PRESURES
TURNABLE PRESSWEGA
STIFF EXTRUDERS
7
8/2/2019 Brick Machinary
8/10
8
for buffering between preparation and shaping,
for mixing and homogenizing large volumes,
and for improving plasticity by souring. The
cross-dredging souring plant enables optimal
homogenization for storage capacities ranging
from roughly 3000 to 45000 m3.
TYPE SEBQ
for buffering between preparation and shaping,
for mixing and homogenizing large volumes, and
for improving plasticity by souring. Available as
single or double sumps, the longitudinal-dred-
ging souring plant is the most widely used sou-
ring system for storage capacities between 1000
and 15000 m3.
TYPE SEBL
LONGITUDINAL-DREDGING
SURING PLANT
CROSS-DREDGINGSURING PLANT
for pressing large-area tiles according to a con-
cept based on a combination of electromecha-nical pressure generation and pressure intensifi-
cation via a drive column and a multiple toggle.
4000 kN pressing power, 140 mm working
stroke.
TYPE NOVA
REVOLVING PRESSNOVA
with a discharger and a silo shaft made of con-
crete, masonry or steel plate - for contents bet-
ween 110 and 1000 m3 and outfeed capacities
up to approx. 55 m3/h, depending on the diame-
ter of the auger.
TYPEAGR
CIRCULAR SILOS
8/2/2019 Brick Machinary
9/10
Performance as you need
The throughput stated for the machines is in m3/h. For
the extruders it refers to the compact, wet pressed
body, while for the box feeders and handling equip-
ment it refers to the loose bulk.
Please note the following rule of thumb:
1 m3 wet pressed body = 1,2 1,35 m3 loose bulk
1 m3 wet pressed body = 1,36 t fired clay
1 t fired clay = 0,735 m3 wet pressed body
Call us to find out more
This brochure gives you a brief overview of the
HNDLE manufacturing technology for the ceramics
industry. If you would like to find out more about any
of the machines mentioned, feel free to call us for a
detailed product brochure.
Laboratory
Conveying and storing
Screening
Feeding and propotioning
Crushing
Mixing and homogenizing
Shaping extruding
Shaping molding
Service
8/2/2019 Brick Machinary
10/10
HNDLE GMBH Maschinen und Anlagenbau
Industriestrae 47
75417 Mhlacker (Germany)
Phone + 49 7041 891-1
Fax + 49 7041 891-232
24-Hours-Hotline + 49 171 7323636
www.haendle.com
A partner of internat ional size
Our products are used in many different countries, and
they are more than a match for our competitors here in
Germany.
With HNDLE, you'll always have a competent contact
in a place near you, anywhere in the world.
Netz
werkMenschWerbeagentur08/2003