Brausse: the best alternative to established high quality finishing machines Brausse Europe Welcome 90 machines sold in Europe Die cutting Hot foil stamping

Brausse: the best alternative to established high quality finishing machines

Brausse Europe

Welcome90 machines sold in Europe

Die cutting

Hot foil stamping

Folder gluers

Handfed platens

Brausse: the best alternative to established high quality finishing machines

Brausse Europe with its main office and demo centre in 's-Hertogenbosch, the Netherlands, is the exclusive European representative of the Shanghai folding carton division.

90 machines sold in Europe

Die cutting

Hot foil stamping

Folder gluers

Handfed platens

Brausse Europe is offering SOLUTIONS!

* Die cutting & stripping* 1050 x 750 mm

Brausse BORA 1050E die cutter

Brausse Europe

Portfolio

Brausse BORA 1450E die cutter, large format



Ipsum ML750 handfed platen

* Handfed platens* 750 up to 3000 mm

Brausse BORA 106E die cutter


* Foil stamping* 1050 x 750 mm

Brausse SIGNA 1050F foil stamper

Brausse Europe

Portfolio

Brausse SIGNA 106F Hybrid foil stamper

* Foil stamping & stripping* 1060 x 750 mm

Brausse FORZA 110 folder gluer

* Folder gluers* 550 up to 1450 mm

NEWBeginning 2015

Brausse Optima series

Brausse Signa 105F HybridDie cutting and creasing machine with hot foil stamping and stripping device

Hot foil stamping

Brausse Signa 1050F Hybrid

This machine is a hybrid machine:

• it can be operated as a hot foil stamping machine

• it can also be operated as die cutting and stripping machine

Highlights of all Brausse machines:

• Extremely smoothly running due to the unique index box drive of the main chain

• All electrical components are off the shelf brand names such as Omron and Siemens

• All PLC controls are from Mitsubishi• Main clutch from the Swiss producer Borg Warnar• All operating software in the local language

Brausse Signa 105F Hybrid die cutting, hot foil stamping and stripping


Hot foil stamping


• Touch panel for easy failure monitoring• Speed and working tonnage is displayed• Possibility to set pressure limit for more safety • Turbo blowing foot for better sheet separation

• Possibility to feed the paper in ‘out of square’


Hot foil stamping


High quality electric and electronic parts

Remote support by standard modem


Hot foil stamping


Sophisticated feeder

• From 80g/m2 up to 4 mm• Slow down device for thin paper


Hot foil stamping


• Side lay pull on OS and DS standard• Side lay push on OS and DS standard

Each gripper bar can be individually shimmed to ensure very precise register in case of uneven chain stretching after years of production


Hot foil stamping


• Four individually adjustable front lays with dial read out at the operation side of the machine• Four electronic front lay controls by means of Omron Glasfiber Optik, adjustable two by two• Pneumatic die chase locking mechanism to ensure safe and operator friendly changing of the die• Frontmark control with adjustable density


Hot foil stamping


• Optional - die cutting plate with 1 mm quick change system • Time saving with repeating jobs


Hot foil stamping


Double web break detection


Two unwind shafts standard (three optional)

Hot foil stamping


Oil cooled tension shaft + foil splitting blade


45 degree turning bars

Hot foil stamping


Preparing a foil stamping job


Rewinder for 6 webs standard

Hot foil stamping


Foil program operating panel


• Short and long foil-pull calculation program

• Heating base with 12 heating zones, temperature of

each zone adjustable individually

• Automatic temperature lowering system

Hot foil stamping


How to change from foiling to stripping?


Hot foil stamping



Optional change table

Optional - foil presetting table including one set of shafts and disks

Hot foil stamping


Optional - quick locking systems for stripping


Hot foil stamping


Brausse production plant in Shanghai


Brausse Shanghai China

Production plant


Production plant

Brausse production in Shanghai



Production plant




Production plant




Production plant

Brausse assembly in Shanghai


Available models:

Die cutting

Hot foil stamping

Folder gluers

Handfed platens


Die cutting:BrausseOPTIMA 1060ERBORA 1050E BORA 106EBORA 1450E

Hot foil stamping:BrausseSIGNA 1050FSIGNA 1050F HybridSIGNA 106FSIGNA 106F Hybrid

Folder gluers:BrausseFORZA 55FORZA 110PRIMA 1450

Handfed platens:IpsumML750ML1100ML1600ML1800ML2000ML2500ML3000

Die cutting

Hot foil stamping

Folder gluers

Handfed platens


www.brausse-europe.com

• 2 years warrantee with NO production limit• DDU• Unloaded and installed• 5 days instruction

Brausse EuropeSiloweg 6125222 BM ‘s-HertogenboschNetherlands

Documents

Brausse: the best alternative to established high quality finishing machines Brausse Europe Welcome 90 machines sold in Europe Die cutting Hot foil stamping