Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
63
BRASSPUSH-IN FITTINGS
WITH T.E.A. SURFACE
TREATMENT
PLUS
HIGH CORROSION AND CHEMICAL RESISTANCE
SURFACE FINISHING TREATMENT (T.E.A.)
STUDIED TO GUARANTEE RELIABILITY AND HIGH MECHANICAL EFFICIENCY
EXTREMELY SOLID AS THEY ARE IN METAL
VACUUM RESISTANCE
PUSH-IN FITTINGS / BRASS WITH T.E.A. SURFACE TREATMENT 64
p. 66 / HFMM p. 67 / HFUCp. 67 / HFL-Gp. 66 / HFCFp. 66 / HFC-G
p. 67 / HFUT
p. 67 / HFUL
PUSH-IN FITTINGS / BRASS WITH T.E.A. SURFACE TREATMENT65
INSERTION OF THE TUBE INTO THE FITTING
T.E.A® SURFACE TREATMENT
- Make sure the tube is fully inserted into the fitting. - To insert the tube into the fitting cut the tube at a squared angle (90°), insert up to the end and pull gently to make sure it is correctly connected. - If there are any damages or scratches on the tube surface or an oval shape, air leakage and tube release may occur. Check it carrefuly.
- The OD of polyurethane tubes expand when pressure is applied. Reinsertion into the fitting may not be possible. Check the OD of the tube and change the tube if the expansion is serious.
- Always remove by cutting the part of the tube previously inserted into the fitting. Use a proper tube cutter in order to cut the tube.
T.E.A® satisfies the most restrictive international standard limits for nickel transfer applied to human consumption of food like NSF51, NSF4, UNI10531 and 11460 for coffee machines and other “food zone”devices.T.E.A® is a patented eco-friendly alloy finishing according to standard NSF51. T.E.A® is a registered trade mark owned by La Tecnogalvano - RuvecoLab division.
DISCONNECTION OF THE TUBE FROM THE FITTING
- Make sure the pressure is zero before releasing the tube from the fitting. - To release the tube, press the release ring regularly at the end and pull the tube with one hand.
CONSTRUCTION MATERIALS
-20°C ÷ 150°C
Bar
Working pressure: 16 Bar Negative pressure: -750 mmHg
Compressed air, vacuum and fluids compatible with the construction materials.
Polyethylene, Polyamide, Polyurethane, PTFE - FEP
Parallel gas BSPP ISO 228 from G1/8” to G1/2” Metric ISO 262 M5x0,8P
Body: brass UNI EN 12164 CW614N & UNI EN 12164 CW617N surface treatment T.E.A.Collet: brass UNI EN 12164 CW614N surface treatment T.E.A.Lock claw: brass UNI EN 12164 CW614N surface treatment T.E.A.O-Ring: viton suitable for food contactRetaining ring for swivel systems: AISI 302 stainless steel (1.4310)
Products in compliance with the directive 2011/65/EU
Products in compliance with the directive 2002/95/EC
PUSH-IN FITTINGS / BRASS WITH T.E.A. SURFACE TREATMENT 66
CODE ØD T I L A B H1 H2 GR.
HFC04M5 4 M5X1 4 20 9 2,5 / 2,5 6,0
HFC04G01 4 G1/8" 6 20 13,5 2,5 9 2,5 9,0
HFC04G02 4 G1/4" 8 21 16 2,5 9 2,5 14,0
HFC06G01 6 G1/8" 6 22,5 13,5 4,2 11 4 12,0
HFC06G02 6 G1/4" 8 22,5 16 4,2 11 4 17,0
HFC08G01 8 G1/8" 6 25 14,5 5,2 13 5 14,0
HFC08G02 8 G1/4" 8 23,5 16 6,2 13 6 17,0
HFC08G03 8 G3/8" 8 24 21 6,2 13 6 24,0
HFC10G02 10 G1/4" 6,5 26,5 16 7,2 16 7 23,0
HFC10G03 10 G3/8" 7,5 28 21 8,3 16 8 30,0
HFC12G02 12 G1/4" 6,5 30,5 18 7,2 18 7 27,0
HFC12G03 12 G3/8" 9 31 21 10,2 18 10 31,0
HFC12G04 12 G1/2" 11 31,5 24 10,3 18 10 40,0
CODE ØD T ØA ØP I L H1 GR.
HFCF04G01 4 1/8" 3 12 6,5 25 9 12,0
HFCF04G02 4 1/4" 3 16 10 28,5 9 25,0
HFCF06G01 6 1/8" 5 12 6,5 25 11 12,0
HFCF06G02 6 1/4" 5 16 10 29,5 11 22,0
HFCF08G01 8 1/8" 7 12 6,5 26 13 14,0
HFCF08G02 8 1/4" 7 16 10 30,5 13 25,0
HFC-G Male connector BSPP & metric with OR
HFCF Female connector BSPP
CODE ØD L T I MAX H GR.
HFMM0400 4 30,5 M10X1 8 13 11,0
HFMM0600 6 31,5 M14X1 8 17 22,0
HFMM0800 8 34 M16X1 10 18 35,0
HFMM Bulkhead connector
PUSH-IN FITTINGS / BRASS WITH T.E.A. SURFACE TREATMENT67
CODE ØD L H GR.
HFUL0400 4 18 9 10,0
HFUL0600 6 19,5 9 14,0
HFUL0800 8 22,5 12 20,0
HFUL1000 10 23,5 13 26,0
HFUL1200 12 28 17 36,0
CODE ØD L H GR.
HFUT0400 4 18 9 13,0
HFUT0600 6 19,5 9 19,0
HFUT0800 8 22,5 12 28,0
HFUT1000 10 23,5 13 38,0
HFUT1200 12 28 17 50,0
HFUC Union connector
CODE ØD L GR.
HFUC0400 4 30,5 11,0
HFUC0600 6 31,5 21,0
HFUC0800 8 34 31,0
HFUC1000 10 36,5 33,0
HFUC1200 12 44 46,0
HFUL Union elbow
HFUT Union tee
CODE ØD T I ØP L L1 H1 H2 GR.
HFL04M5 4 M5X1 4 9 18,5 16,5 9 9 11,0
HFL04G01 4 G1/8" 6 13 20 21 13 10 18,0
HFL04G02 4 G1/4" 8 16 20 25 13 10 24,0
HFL06G01 6 G1/8" 6 13 20,5 21 13 10 21,0
HFL06G02 6 G1/4" 8 16 20,5 25 13 10 25,0
HFL08G01 8 G1/8" 6 13 22 21 13 10 22,0
HFL08G02 8 G1/4" 8 16 22 25 13 10 26,0
HFL10G02 10 G1/4" 8 16 25 25,5 16 14 32,0
HFL10G03 10 G3/8" 9 19,8 25 29,5 16 14 58,0
HFL-G Swivel male elbow BSPP & metric with OR
PUSH-IN FITTINGS / BRASS WITH T.E.A. SURFACE TREATMENT 68