BPS-LP-0021Pre-Separator Dust Collector

BPS-LP-0021Pre-Separator Dust Collector

This pre-separator can triple the lifetime of the filters because it captures 80-90% of dust. It also prevents reduction in the suction performance of the dust collector. The Blastrac BPS-LP-0021 is equipped with a Longopac bagging system, which is easy to mount and handle. Thanks to this system, the operators have no more contact with the dust in their direct vicinity. The BPS-LP-0021 is ideally suited for use with medium shot blasting, grinding, polishing and scarifying machines. L,W,H

LBS

DIMENSIONS:L 35 IN X W 28 IN X H 62 IN

WEIGHT:120 LB

ENDLESSBAGGING SYSTEM

DUST HOSE INLET:3IN

MEDIUM SIZE GRINDERS / SHOT BLASTERS / SCRARIFIERS /

Key Points

� No power needed

� Adjustable height for easy transportation

� Can collect up to 55 pounds of dust in easy to handle Longopac bags

Key Points

� User friendly design with easy dust collection connection

� Can triple the lifetime of dust collector filters

� Prevents reduction in suction perfromance of the dust collector

FOR MORE INFORMATION VISIT WWW.BLASTRAC.COM BLASTRAC 12/2018 � This document is not contractual � Design and technical specifications may be subject to change

BPS-LP-0021 Pre-Separator Dust Collector

BPS-LP-0021 OPTIONS

SUCTION HOSE Y-PIECE

Y-PIECELONGOPAC CASSETTES-

EXTRA STRONG

CONNECTOR REDUCER

FOR MORE INFORMATION VISIT WWW.BLASTRAC.COM BLASTRAC 12/2018 � This document is not contractual � Design and technical specifications may be subject to change