Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
B O Y D L I G H T I N G C O M P A N Y 2 0 1 9 C A T A L O G
Shown in Antiqued Boyd Brass
Branch Sconce
31.375”
1.125”
31.375”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
M O D E L # 1 0 7 2 0
Square tubes of hand-finished brass rotate for multi-
directional illumination which glows from behind
satin white diffusers. The top arm rotates 180° and the
lower arm rotates 90° to ensure they do not interfere
with each other. Branch is made-to-order by hand in
Colorado. Designed by Doyle Crosby.
MATERIALS
Hand-finished brass and satin white acrylic diffusers.
FINISHES
Satin Brass, Antiqued Boyd Brass (shown), Blackened
Brass and Satin Nickel.
LAMPING
14 watt LED lamps (included) offer 2700°k, 90+ CRI
illumination, providing ~850 lumens at 120 or 277v.
Upcharges apply for dimming.
DIMENSIONS WEIGHT
W 31.375” x H 31.375” x D 1.125” 7 lbs.
W 79.7 cm x H 79.7 cm x D 29 mm 1.8 kg.
NOTES
• Backplate: W 2” x H 4” (51 mm x 10.2 cm)
• Center of outlet box to top of fixture: 10.875” (27.6 cm)
• For ADA compliance, height of center of outlet box
above finished floor: 75” (190.5 cm)
• UL listed (or equivalent) for damp locations
Branch Sconce
Shown in Blackened Brass
Branch Table Lamp
26.5”
24.875”
7” 5”
1.125”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
M O D E L # 1 0 7 2 1
Square tubes of hand-finished brass rotate for multi-
directional illumination which glows from behind satin
white diffusers. Branch is made-to-order by hand in
Colorado. Designed by Doyle Crosby.
MATERIALS
Hand-finished brass and satin white acrylic diffusers.
FINISHES
Blackened Brass (shown), Satin Brass, Antiqued Boyd
Brass and Satin Nickel.
LAMPING
12 watt LED lamps (included) offer 2700°k, 90+ CRI
illumination, providing ~700 lumens at 120 or 277v.
On/off switch on base.
DIMENSIONS WEIGHT
W 26.5” x H 24.875” x B 7” x 5” 8 lbs.
W 67.3 cm x H 63.2 cm x B 17.8 cm x 12.7 cm 3.6 kg.
NOTES
• UL listed (or equivalent)
Branch Table Lamp
Shown in Cloud
Ghost Pendant Rectangle
SpecifyHeight
1”
2”
14”
49”
25.25”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
M O D E L # 1 0 7 0 1
Welded with great care is a hand-finished aluminum
frame which holds an acrylic diffuser. In the off position,
the Ghost is transparent. Turn it on and it becomes
opaque. When LEDs illuminate the sides of the acrylic
diffuser, light reflects up and down. Ghost is made-to-
order by hand in Colorado. Designed by Doyle Crosby.
MATERIALS
Hand-finished aluminum and acrylic diffuser in clear or
micro-etched dots.
FINISHES
Satin Aluminum, Dark Bronze, Black Granite and
Cloud (shown).
LAMPING
81 watt LED lamps (included) offer 2700°k or 3500°k,
90+ CRI illumination providing ~6,500 lumens at 120
or 277v. Fixture can be dimmed using 0-10v low-
voltage dimming controls and wiring.
DIMENSIONS WEIGHT
W 25.25” x H 1” x L 49” 12 lbs.
W 64 cm x H 2.5 cm x L 125 cm 5.5 kg.
NOTES
• Canopy: W 14” x H 2” x L 8.375” x; 36 cm x 5 cm x 21 cm
• Tunable LEDs coming Fall 2019.
• Stainless steel aircraft cables can be minimally adjusted
on-site via spring-loaded cable grips.
• For 50% uplight and 50% downlight, choose the clear
acrylic. For 60% uplight and 40% downlight, choose
the micro-etched dot pattern.
• UL listed (or equivalent) for damp locations
Ghost Pendant Rectangle
Ghost Pendant Round
Shown in Dark Bronze
SpecifyHeight
1”
2”
11.875”
36“ or 48”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
Ghost Pendant Round 36” & 48”M O D E L # 1 0 7 0 2 ( 3 6 ” ) , 1 0 7 0 3 ( 4 8 ” )
Welded with great care is a hand-finished aluminum frame
which holds an acrylic diffuser. In the off position, the
Ghost is transparent. Turn it on and it becomes opaque.
When LEDs illuminate the sides of the acrylic diffuser, light
reflects up and down. Ghost is made-to-order by hand in
Colorado. Designed by Doyle Crosby.
MATERIALS
Hand-finished aluminum and acrylic diffuser in clear or
micro-etched dots.
FINISHES
Satin Aluminum, Dark Bronze, Black Granite and
Cloud (shown).
LAMPING
81 watt LED lamps (included) offer 2700°k or 3500°k,
90+ CRI illumination providing ~6,500 lumens at 120
or 277v. Fixture can be dimmed using 0-10v low-
voltage dimming controls and wiring.
DIMENSIONS WEIGHT
36”: Dia. 36” x H 1” 12 lbs.
Dia. 91 cm x H 5 cm 5.5 kg.
48”: Dia. 48” x H 1” 16 lbs.
Dia. 122 cm x H 5 cm 7.3 kg.
NOTES
• Tunable LEDs coming Fall 2019.
• Stainless steel aircraft cables can be minimally adjusted
on-site via spring-loaded cable grips.
• For 50% uplight and 50% downlight, choose the clear
acrylic. For 60% uplight and 40% downlight, choose
the micro-etched dot pattern.
• UL listed (or equivalent) for damp locations
Shown in Satin Brass
Loop Double Sconce
24.375”
4.25” 3.5”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
Loop Double SconceM O D E L # 1 0 7 2 6
A hand-finished loop of brass cradles a gently
sloping white cased glass diffuser which emits warm
illumination. Loop Double is made-to-order by hand in
Colorado. Designed by Deirdre Jordan.
MATERIALS
Hand-finished brass and cased white glass diffuser.
FINISHES
Antiqued Boyd Brass, Blackened Brass, Satin Brass
(shown), and Satin Nickel.
LAMPING
18 watt LED lamps (included) offer 2700°k or 3000°k or
3500°k, 90+ CRI illumination, providing ~1550 lumens
at 120 or 277v. Driver must be mounted remotely.
Fixture may be dimmed using 0-10V dimming controls
and wiring.
DIMENSIONS WEIGHT
W 4.254” x H 24.375” x D 3.5” 15 lbs.
W 10.8 cm x H 61.9 cm x D 89 mm 6.8 kg.
NOTES
• Center of outlet box to top of fixture: 5.125” (13 cm).
• ADA compliant at any mounting height
• UL listed (or equivalent) for damp locations
Shown in Satin Brass
Loop Pendant
SpecifyHeight
5”
4.25”36“ or 48”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
Loop Pendant 36” & 48”M O D E L # 1 0 7 2 8 ( 3 6 ” ) , 1 0 7 2 9 ( 4 8 ” )
A hand-finished loop of brass cradles a gently
sloping white cased glass diffuser which emits warm
illumination. Loop Pendant is made-to-order by hand
in Colorado. Designed by Deirdre Jordan.
MATERIALS
Hand-finished brass and cased white glass diffuser.
FINISHES
Antiqued Boyd Brass, Blackened Brass, Satin Brass
(shown), and Satin Nickel.
LAMPING
36 watt LED lamps (included) offer 2700°k or 3000°k
or 3500°k, 90+ CRI illumination, providing ~3000
lumens at 120 or 277v. Fixture may be dimmed using
0-10V dimming controls and wiring.
DIMENSIONS WEIGHT
36”: W 4.25” x H 5” x L 36” 35 lbs.
W 10.8 cm x H 12.7 cm x L 91.4 cm 15.9 kg.
48”: W 4.25” x H 5” x L 48” 40 lbs.
W 10.8 cm x H 12.7 cm x L 226.1 cm 18.2 kg.
NOTES
• Specify Height Overall
• 36” Canopy: W 4.25” x L 36” (10.8 cm x 86.4 cm)
• 48” Canopy: W 4.25” x L 48” (10.8 cm x 116.8 cm)
• UL listed (or equivalent) for damp locations
Shown in Antiqued Boyd Brass
Loop Single Sconce
14”
3½”
4¼” 3½”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
M O D E L # 1 0 7 2 5
A hand-finished loop of brass cradles a gently
sloping white cased glass diffuser which emits warm
illumination. Loop Single is made-to-order by hand in
Colorado. Designed by Deirdre Jordan.
MATERIALS
Hand-finished brass and cased white glass diffuser.
FINISHES
Antiqued Boyd Brass (shown), Blackened Brass, Satin
Brass, and Satin Nickel.
LAMPING
9 watt LED lamps (included) offer 2700°k or 3000°k or
3500°k, 90+ CRI illumination, providing ~750 lumens
at 120 or 277v. Driver must be mounted remotely.
Fixture may be dimmed using 0-10V dimming controls
and wiring.
DIMENSIONS WEIGHT
W 4.25” x H 14” x D 3.5” 7 lbs.
W 10.8 cm x H 35.6 cm x D 89 mm 3.2 kg.
NOTES
• Center of outlet box to top of fixture: 5.125” (13 cm)
• ADA compliant at any mounting height
• UL listed (or equivalent) for damp locations
Loop Single Sconce
Shown in Dark Bronze
Obi Sconce
20”
7.125” 6”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
M O D E L # 1 0 6 9 4
Attached to a curved, hand-finished aluminum backplate
is a cylindrical cased white glass diffuser wraped with
criss-crossing aluminum “straps”. Obi is made-to-order
by hand in Colorado. Designed by Juan Poggi.
MATERIALS
Hand-finished aluminum and cased white glass diffuser.
FINISHES
Blackened Aluminum, Satin Aluminum, Cloud, Dark
Bronze (shown), and Gloss White (shown).
LAMPING
18 watt LED lamps (included) offer 2700°k, 90+ CRI
illumination, providing ~700 lumens at 120 or 277v.
Fixture may be dimmed using 0-10V dimming controls
and wiring.
DIMENSIONS WEIGHT
W 7.125” x H 20” x D 6” 6 lbs.
W 18.1 cm x H 50.8 cm x D 15.2 cm 2.7 kg.
NOTES
• Center of outlet box to top of fixture: 10” (25.4 cm)
• For ADA compliance, height of center of outlet box
above finished floor: 88.5” (244.8 cm)
• UL listed (or equivalent) for damp locations
Obi Sconce
Shown in Satin Nickel
Plateau Sconce Round
6”, 10“ or 14” 1.25”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
Plateau Sconce Round 6”, 10” & 14”M O D E L # 1 0 7 1 0 ( 6 ” ) , 1 0 7 1 1 ( 1 0 ” ) , 1 0 7 1 2 ( 1 4 ” )
Warm, ambient light glows from behind a plateau of
bent brass as if it were the setting sun. Viewed from the
front the sconces appear in silhouette, yet from the side
the hand-finished brass bursts from the shadows like a
landscape at sunrise. Plateau Round is made-to-order
by hand in Colorado. Designed by Deirdre Jordan.
MATERIALS
Hand-finished brass.
FINISHES
Satin Brass and Satin Nickel (shown).
LAMPING
LED lamps (included) offer 2700°k, 90+ CRI illumination
at 120 or 277v. Driver must be mounted remotely.
Upcharges will apply for LED dimming. The 6” sconce
emits 2.4 watts providing ~200 lumens. The 10” and
14” sconces emit 6.3 watts consuming ~ 400 lumens.
DIMENSIONS WEIGHT
6”: Dia. 6” x D 1.125” 4 lbs.
Dia. 15.2 cm x D 30 mm 1.8 kg.
10”: Dia. 10” x D 1.25” 6 lbs.
Dia. 25.4 cm x D 32 mm 2.7 kg
14”: Dia. 14” x D 1.25” 8 lbs.
Dia. 35.6 cm x D 32 mm 3.6 kg
NOTES
• 6” Backplate: 5” diam (12.7 cm) Centers on outlet box.
• 10” Backplate: 9” diam (22.9 cm) Centers on outlet box.
• 14” Backplate: 13” diam (33 cm) Centers on outlet box.
• ADA compliant at any mounting height
• UL listed (or equivalent) for damp locations
Shown in Satin Brass
Plateau Sconce Square
6”, 10“ or 14” 1.25”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
Plateau Sconce Square 6”, 10” & 14”M O D E L # 1 0 7 1 4 ( 6 ” ) , 1 0 7 1 5 ( 1 0 ” ) , 1 0 7 1 6 ( 1 4 ” )
Warm, ambient light glows from behind a plateau of
bent brass as if it were the setting sun. Viewed from the
front the sconces appear in silhouette, yet from the side
the hand-finished brass bursts from the shadows like a
landscape at sunrise. Plateau Square is made-to-order
by hand in Colorado. Designed by Deirdre Jordan.
MATERIALS
Hand-finished brass.
FINISHES
Satin Brass (shown) and Satin Nickel.
LAMPING
LED lamps (included) offer 2700°k, 90+ CRI illumination
at 120 or 277v. Driver must be mounted remotely.
Upcharges will apply for LED dimming. The 6” sconce
emits 2.4 watts providing ~200 lumens. The 10” and
14” sconces emit 6.3 watts consuming ~400 lumens.
DIMENSIONS WEIGHT
6”: 6” sq. x D 1.125” 4 lbs.
15.2 cm sq. x D 30 mm 1.8 kg.
10”: 10” sq. x D 1.25” 7 lbs.
25.4 cm sq. x D 32 mm 3.2 kg.
14”: 14” sq. x D 1.25” 9 lbs.
35.6 cm sq. x D 32 mm 4.1 kg.
NOTES
• 6” Backplate: 5” sq. (12.7 cm sq.) Centers on outlet box.
• 10” Backplate: 9” sq. (22.9 cm sq.) Centers on outlet box.
• 14” Backplate: 13” sq. (33 cm sq.) Centers on outlet box.
• ADA compliant at any mounting height
• UL listed (or equivalent) for damp locations
Shown in Burnished Bronze
Pueblo Sconce
12”
6.5” 1.75”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
M O D E L # 1 0 6 9 9
Ambient light reveals itself from behind the folds of
asymetrical, hand-finished bronze. Pueblo is made-to-
order by hand in Colorado. Designed by Deirdre Jordan.
MATERIALS
Hand-finished bronze.
FINISHES
Burnished Bronze (shown) and Cloud (shown).
LAMPING
4.6 watt LED lamps (included) offer 2700°k, 90+ CRI
illumination, providing ~300 lumens at 120 or 277v
Upcharges apply for dimming.
DIMENSIONS WEIGHT
W 6.5” x H 12” x D 1.75” 5 lbs.
W 16.5 cm x H 30.5 cm x D 44 mm 2.3 kg.
NOTES
• Backplate: W 11.5” x H 5” (29.2 cm x 12.7 cm)
• Center of outlet box to top of fixture: 6” (15.2 cm)
• ADA compliant at any mounting height
• UL listed (or equivalent) for damp locations
Pueblo Sconce
Shown in Cloud
Santa Fe Sconce
7.25”
13.375” 2.375”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
M O D E L # 1 0 6 9 8
Ambient light reveals itself from behind the folds of
asymetrical, hand-finished bronze. Santa Fe is made-to-
order by hand in Colorado. Designed by Deirdre Jordan.
MATERIALS
Hand-finished bronze.
FINISHES
Burnished Bronze (shown) and Cloud (shown).
LAMPING
6.3 watt LED lamps (included) offer 2700°k, 90+ CRI
illumination, providing ~400 lumens at 120 or 277v.
Upcharges apply for dimming.
DIMENSIONS WEIGHT
W 13.625” x H 7.25” x D 2.375” 5 lbs.
W 34.6 cm x H 18.4 cm x D 60 mm 2.3 kg.
NOTES
• Backplate: W 11” x H 5” (27.9 cm x 12.7 cm)
• Center of outlet box to top of fixture: 3.25” (83 mm)
• ADA compliant at any mounting height
• UL listed (or equivalent) for damp locations
Santa Fe Sconce
Shown in Matte White
Taos Sconce
12”
6.625” 3”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
M O D E L # 1 0 7 0 0
Ambient light reveals itself from behind the folds of
asymetrical, hand-finished bronze. Taos is made-to-
order by hand in Colorado. Designed by Deirdre Jordan.
MATERIALS
Hand-finished bronze.
FINISHES
Burnished Bronze (shown) and Cloud (shown).
LAMPING
4.6 watt LED lamps (included) offer 2700°k, 90+ CRI
illumination, providing ~300 lumens at 120 or 277v.
Upcharges apply for dimming.
DIMENSIONS WEIGHT
W 6.625” x H 12” x D 3” 5 lbs.
W 16.8 cm x H 30.5 cm x D 76 mm 2.3 kg.
NOTES
• Backplate: W 6.125” x H 8.375” (15.6 cm x 21.3 cm)
• Center of outlet box to top of fixture: 7.375” (18.7 cm)
• ADA compliant at any mounting height
• UL listed (or equivalent) for damp locations
Taos Sconce
Shown in Antiqued Boyd Brass
Scorpio Sconce
24.375”
7.125” 3.7”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
M O D E L # 1 0 6 8 1
A precisely machined brass arm provides warm indirect
light that illuminates the rough-hewn, hand cast brass
back plate. Scorpio is made-to-order by hand in
Colorado. Designed by Roger Thomas.
MATERIALS
Brass.
FINISHES
Antiqued Boyd Brass (shown), Blackened Brass, Satin
Brass, Satin Nickel.
LAMPING
17 watt LED lamps (included) 2700°k, 90+ CRI
illumination, providing ~1,100 lumens at 120 or 277v.
Dimmable using 0-10v low-voltage dimming controls
and wiring.
DIMENSIONS WEIGHT
W 24.37” x H 7.12” x D 3.62” 28 lbs.
W 61.9 cm x H 18.1 cm x D 92 mm 12.7 kg.
NOTES
• Backplate: W 4.37” x H 21.25” (W 54 cm x 11.1 cm)
• Center of outlet box to top of fixture: 12.125” (308 mm)
• Backplate is cast and may exhibit slight imperfections
consistent with sand castings.
• UL listed (or equivalent) for damp locations
Scorpio Sconce
Shown in Polished Nickel
Capricorn Sconce
22”
5.375” 4”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
M O D E L # 1 0 6 8 0
The subtle and elegant Capricorn Sconce utilizes a slim
profile, and features a tapered white linen shade, with a
thick brass stem and back plate. Capricorn is made-to-
order by hand in Colorado. Designed by Roger Thomas.
MATERIALS
Brass.
FINISHES
Antiqued Boyd Brass, Blackened Brass, Satin Brass,
Polished Nickel (shown), Satin Nickel.
LAMPING
One, B10, 25W max incandescent lamp with candelabra
base. Lamps not provided with fixture.
DIMENSIONS WEIGHT
W 5.37” x H 22” x D 4” 6 lbs.
W 55.9 cm x H 13.7 cm x D 10.2 cm 2.7 kg.
NOTES
• Tapered Screw-on Half Shade (White Linen):
W 5.37” x H 10.62” (W 13.7 cm x H 27 cm)
• Center of outlet box to top of fixture: 11” (299 mm)
• ADA compliant at any mounting height
• UL listed (or equivalent) for damp locations
Capricorn Sconce
Shown in Satin Brass
Pisces Sconce
18”
8” 4”
Customer Serv ice: 1 .800.224.boyd www.boydl ight ing.com Handmade In Colorado © 2019 Boyd L ight ing Company
M O D E L # 1 0 6 8 1
The beauty of the Pisces lies in the juxtaposition of
materials. The hand carved cast brass back plate is
contrasted with the machined brass elements, which
hold the linen shade. Pisces is made-to-order by hand
in Colorado. Designed by Roger Thomas.
MATERIALS
Brass.
FINISHES
Antiqued Boyd Brass, Blackened Brass, Satin Brass
(shown), Satin Nickel.
LAMPING
One, B10, 40W max incandescent lamp with candelabra
base or LED screw-in lamp. Lamps not provided with
fixture.
DIMENSIONS WEIGHT
W 8” x H 18” x D 4” 22 lbs.
W 20.3 cm x H 45.7 cm x D 10.2 cm 10 kg.
NOTES
• Rectangular Box Shade in White Linen W 7” x H 8.5” x
D 3” (W 17.8 cm x H 21.6 cm x D 77 mm)
• Backplate: W 8” x H 18” (20.3 cm x 45.7 cm)
• Center of outlet box to top of fixture: 9” (229 mm)
• ADA compliant at any mounting height
• UL listed (or equivalent) for damp locations
Pisces Sconce