Upload
mirza-zahidul-alam-shawon
View
234
Download
3
Tags:
Embed Size (px)
DESCRIPTION
measurements
Citation preview
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 1
Levi Strauss & Company Standard Measurement Procedures
Bottoms
Levis / Dockers / LSS
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 2
Tools Needed for Measuring: 1. Measurement Manual (Train the Trainer) 2. Measurement Video Guide for all Brands (Train the Trainer) 3. Metal Ruler 4. Fiberglass Coated Tape Measure 5. Stitch Count - for Counting SPI 6. Chalk, Tailor Chalk and/or Tape - for marking 7. Measurement/Audit Forms 8. Measurement Specs 9. Hook - for elastic waistband 10. Smooth Flat Surface Table 11. Grid for Table 12. Good Lighting 13. Floor Mat
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 3
WAIST All Brands
WAIST
Lay garment flat, face up with waistband edges flush so that no dipping occurs at center.
Measure along top edge of waistband, outside edge to outside edge. Double for total waist measurement.
QUALITY POINTS
Use ruler. There should be no slack in the waistband. Do not stretch waistband.
IF SPECIAL SYTLING, REFER TO MEASUREMENT SPECS
DraFix Cad1a-Waist
JaneR.
Doubled or X2
Measured tooutside edge
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 4
WAIST All Brands
WAIST, ALTERNATE METHOD - Due to thickness and/or styling, this alternate method may need to be used so that the waistband will lay smoothly.
Fold garment with fly turned to left. Measure along top edge of waistband, outside edge to outside edge. Double for total waist measurement.
QUALITY POINTS
Use ruler. There should be no slack in the waistband. Do not stretch waistband.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS
DraFix Cad1b-WaistJaneR.
Doubled or X2
Measured tooutside edge
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 1
WAIST-Elastic All Brands ELASTIC WAIST (RELAXED) - This is a relaxed measurement. The waistband should be smooth and flat with no slack, but not stretched.
Lay garment flat, face up, with waistband edges flush so that no dipping occurs at center.
Measure along top edge of waistband, outside edge to outside edge.
Double for total waist measurement.
QUALITY POINTS
Use ruler. Do not stretch.
ELASTIC WAIST (S-T-R-E-T-C-H-E-D) - This is a stretched measurement. Stretch to full extension of elastic
Lay garment flat, face up with waistband edges flush so that no dipping occurs at center.
Stretch to full extension of elastic.
Measure along top edge of waistband, outside edge to outside edge.
Double for total waist measurement. QUALITY POINTS
Use ruler.
Doubled or X2
Relaxed Measurement
DraFix Cad1c-WaistJaneR.
Measured tooutside edge
Doubled or X2
Measured tooutside edge
DraFix Cad1c-WaistJaneR.
Stretched Measurement
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 2
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 3
WAIST- Elastic All Brands
ELASTIC WAIST-ALTERNATE METHOD - Due to thickness and/or styling, this alternate method may need to be used so that the waistband will lay smoothly.
Fold garment with fly turned to left. QUALITY POINTS
Use ruler.
FOLLOW PAGE 4 FOR SPECIFIC MEASUREMENT INSTRUCTIONS AND QUALITY POINTS FOR RELAXED AND STRETCHED ELASTIC WAIST.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
DraFix Cad1d-WaistJaneR.
Doubled or X2
Measured tooutside edge
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 4
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 5
HIGH HIP For These Brands Levis Womens Dockers Womens LSS Womens
HIGH HIP
Lay garment flat, face up, let pant lay naturally from waist. (Back will sit higher than front.)
Measure from bottom waistband seam, down 4 along outseam. (Or as indicated in Measurement Specification).
Measure straight across, outside edge to outside edge. Double for total high hip measurement.
QUALITY POINTS
Use measurement tape Garment must lay smooth and flat with no hidden wrinkles or pleats on underside.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
DraFix Cad2a-HipJaneR.
Doubled or X2
4" 4"
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 6
LOW HIP For This Brand Levis Womens LSS Womens
LOW HIP
Lay garment flat, face up, let garment fall naturally from waist. (Back will sit higher than front.)
Measure from bottom waistband seam down 8 along outseam edge. (Or as indicated in Measurement Specification).
Measure straight across, outside edge to outside edge. Double for total low hip measurement.
QUALITY POINTS
Use tape measure. Garment must lay smooth and flat with no hidden wrinkles or pleats on underside. Do not stretch garment.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
Doubled or X2
DraFix Cad2b-SeatJaneR.
8" 8"
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 7
LOW HIP-Pleated Pant For These Brands Levis Womens Dockers Womens LSS Womens
LOW HIP Pleated Pant
Lay garment flat, face up, let garment fall naturally from waist. (Back will sit higher than front.)
Measure from bottom waistband seam down 7-1/2 along outseam edge. (Or as indicated in Measurement Specification).
Measure straight across, outside edge to outside edge. Double for total low hip measurement.
QUALITY POINTS
Use tape measure. Garment must lay smooth and flat with no hidden wrinkles or pleats on underside. Do not stretch garment.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
DraFix Cad2c-SeatJaneR.
4"
Smooth Out
DO NOT STRETCH
Smooth Out
7-1/2"
Doubled or X2
7-1/2"
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 8
SEAT For These Brands Levis Mens LSS Mens
SEAT
Lay garment flat, face up. Let garment fall naturally from waist. (Back will sit higher than front.)
Measure up 4 from crotch point on front. Measure straight across, from outside edge to outside edge. Double for total seat measurement.
QUALITY POINTS
Use tape measure. Garment must lay smooth and flat with no hidden wrinkles or pleats on underside. Do not stretch garment.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS
Doubled or X2
DraFix Cad3a-SeatJaneR.
4"
Felled Seam
Crotch point is equal to center
of diamond
Safety & OpenSeams
Crotch point is equal to seam edge
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 9
SEAT For These Brands Levis Boys/Girls/Little Levis Dockers Boys LSS Boys/Girls
SEAT
Lay garment flat, face up, let garment fall naturally from waist. (Back will sit higher than front.)
Measure up 3 from crotch point on front (Or as indicated in Measurement Specification).
Measure straight across, from outside edge to outside edge. Double for total seat measurement.
QUALITY POINTS
Use tape measure. Garment must lay smooth and flat with no hidden wrinkles or pleats on underside. Do not stretch garment.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
Doubled or X2
DraFix Cad3b-SeatJaneR.
3"
Felled Seam
Crotch point is equal to center
of diamond
Safety & OpenSeams
Crotch point is equal to seam edge
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 10
SEAT-Pleated Pant For These Brands Levis Boys/Girls/Little Levis Dockers Boys LSS Boys/Girls
SEAT-PLEATED PANT
Lay garment flat, face up, let garment fall naturally from waist. (Back will sit higher than front.)
Measure up 3 from crotch point on front. Measure straight across, outside edge to outside edge. Double for total seat measurement.
QUALITY POINTS
Use tape measure. Garment must lay smooth and flat with open pleats and no wrinkles on underside.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
Doubled or X2
DraFix Cad3d-SeatJaneR.
3"
Smooth Out
DO NOT STRETCH
Smooth Out
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 11
SEAT-Pleated Pant For These Brands Dockers Men
SEAT-PLEATED PANT
Unbutton and unzip pants. Lay garment flat, face up, let garment fall naturally from waist. (Back will sit
higher than front.) Using the bartack at the bottom of the J-stitch as the measuring point, measure
straight across, outside edge to outside edge. Double for total seat measurement.
QUALITY POINTS
Use tape measure. Garment must lay smooth and flat with open pleats and no wrinkles on underside. Do not stretch garment.
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 12
SEAT-Flat Front Pant For These Brands Dockers Men
SEAT-FLAT FRONT PANT
Unbutton and unzip pants. Lay garment flat, face up, let garment fall naturally from waist. Using the bartack at the bottom of the J-stitch as the measuring point, measure
straight across, out side edge to outside edge. Double for total seat measurement.
QUALITY POINTS
Use tape measure. Garment must lay smooth and flat with no wrinkles on underside. Do not stretch garment.
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 13
THIGH For These Brands Levis Mens/Womens Dockers Mens/Womens LSS Mens/Womens
THIGH
Lay garment flat, face up. Measure 2 down left leg from crotch point. Measure straight across, outside edge to outside edge. Double for total thigh measurement.
QUALITY POINTS
Use tape measure. Garment must lay smooth and flat with no hidden wrinkles or pleats on underside. Do not stretch garment.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS
DraFix Cad4a-ThighJaneR.
Felled Seam
Crotch point is equal to center
of diamond
Safety & OpenSeams
Crotch point is equal to seam edge Doubled or X2
2"
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 14
THIGH For These Brands Levis Boys/Girls/Little Levis Dockers Boys LSS Boys/Girls
THIGH
Lay garment flat, face up. Measure 1 down left leg from crotch point. Measure straight across, outside edge to outside edge. Double for total thigh measurement.
QUALITY POINTS
Use tape measure. Garment must lay smooth and flat with no hidden wrinkles or pleats on underside. Do not stretch garment.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
DraFix Cad4b-ThighJaneR.
Felled Seam
Crotch point is equal to center
of diamond
Safety & OpenSeams
Crotch point is equal to seam edge
Doubled or X21"
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 15
KNEE For These Brands Levis Mens Dockers Mens LSS Mens
KNEE Lay garment flat, face up. Use left leg, fold hem to crotch point to find midpoint. Measure up 2 above midpoint. Measure straight across, edge to edge. Double for total knee measurement.
QUALITY POINTS
Use tape measure. Garment must lay smooth and flat with no hidden wrinkles or pleats on underside.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
DraFix Cad5a-KneeJaneR.
Doubled or X2
CrotchPoint
2"
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 16
KNEE For These Brands Levis Boys/Girls/Little Levis Dockers Boys LSS Boys/Girls
KNEE
Lay garment flat, face up. Use left leg, fold hem to crotch point to find midpoint. Measure up 1 above midpoint. Measure straight across, edge to edge. Double for total knee measurement.
QUALITY POINTS Use tape measure. Garment must lay smooth and flat with no hidden wrinkles or pleats on underside.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
DraFix Cad5b-KneeJaneR.
CrotchPoint
1"
Doubled or X2
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 17
KNEE For These Brands Levis Womens Dockers Womens LSS Womens
KNEE Lay garment flat, face up. Use left leg. Measure 11 down inseam from crotch point. (Or as indicated in
Measurement Spec). Measure straight across, edge to edge. Double for total knee measurement.
QUALITY POINTS
Use tape measure. Garment must lay smooth and flat with no hidden wrinkles or pleats on underside.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
DraFix Cad5c-KneeJaneR.
CrotchPoint
Doubled or X2
11"
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 18
LEG OPENING All Brands
BOTTOM
Lay garment flat, face up. Roll side seams in. Measure straight across bottom edge, outside edge to outside edge. Double for total bottom measurement.
QUALITY POINTS
Use tape measure. Smooth out, do not stretch. If center creased, open up to measure.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
DraFix Cad6a-legopJaneR.
Measure from outside edge
to outside edge
Doubled or X2
Sideseam Rolled In
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 19
LEG OPENING - Elastic All Brands
ELASTIC BOTTOM (RELAXED) - This is a relaxed measurement. Do not stretch. Lay garment flat, face up. Roll side seams in. Measure straight across bottom edge, outside edge to outside edge on left leg. Double for total bottom measurement.
QUALITY POINTS Use tape measure.
If center creased, open up to measure. ELASTIC BOTTOMS (S-T-R-E-T-C-H-E-D) - This is a stretched measurement. Stretch to full extension of elastic.
Lay garment flat, face up. Roll side seams in. Stretch to full extension of elastic. Measure straight across bottom edge, outside edge to outside edge on left leg. Double for total bottom measurement.
QUALITY POINTS Use tape measure. If center creased, open up to measure.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
DraFix Cad6b-legopJaneR.
Doubled or X2Relaxed Measurement
Sideseam Rolled In
Measure from outside edge
to outside edge
Doubled or X2Stretched Measurement
DraFix Cad6b-legopJaneR.
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 20
INSEAM All Brands
INSEAM
Lay garment flat, face up. Use left leg. Garment must be horizontal with waistband at left. Measure from crotch point to bottom hem following seam shape.
QUALITY POINTS
Use ruler. Do not hold out inseam with both hands, this will stretch it. Pant must be measured flat on a table.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
Felled Seam
Crotch point is equal to center
of diamond
Safety & OpenSeams
Crotch point is equal to seam edge
DraFix Cad7a-Inseam
JaneR.
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 21
INSEAM (With Elastic Cuff or Rib) All Brands
INSEAM
Lay garment flat, face up. Use left leg. Garment must be horizontal with waistband at left. Measure from crotch point to bottom edge of rib or cuff following seam shape.
QUALITY POINTS
Use ruler. Do not hold out inseam with both hands, this will stretch it. Pant must be measured flat on a table.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
Felled Seam
Crotch point is equal to center
of diamond
Safety & OpenSeams
Crotch point is equal to seam edge
DraFix Cad7b-Inseam
JaneR.
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 22
FRONT RISE All Brands
FRONT RISE
Lay garment flat, face up. Measure center front from crotch point to top of waistband edge.
QUALITY POINTS
Use tape measure. Follow crotch curve. Do not stretch. Do not pull out straight. Rise must lay smooth without slack.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
Felled Seam
Crotch point is equal to center
of diamond
Safety & OpenSeams
Crotch point is equal to seam edge
DraFix Cad8a-FriseJaneR.
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 23
BACK RISE All Brands
BACK RISE
Lay garment flat, face down, with crotch point visible. Measure center front from crotch point to top of waistband edge.)
QUALITY POINTS
Use tape measure. Follow crotch curve. Do not stretch. Do not pull out straight. Rise must lay smooth without slack, but not stretched.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
Felled Seam
Crotch point is equal to center
of diamond
Safety & OpenSeams
Crotch point is equal to seam edge
DraFix Cad9a-briseJaneR.
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 24
ZIPPER FLY All Brands
FLY OPENING
Lay garment flat, face up. Zipper to be unzipped and fly to be completely open. Measure right side of zipper from bottom of waistband to top of slider.
QUALITY POINTS
Use tape measure. Garment must be flat and smooth with no wrinkles or pleats on underside.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
DraFix Cad10a-ZipJaneR.
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 25
ZIPPER FLY- Extended Band For These Brands Levis Mens/Womens
Dockers Mens/Women LSS Mens/Womens
Lay garment flat, face up. Zipper to be unzipped and fly to be completely open. Measure left side of fly from top of zipper stop to top of slider.
QUALITY POINTS Use tape measure. Garment must be flat and smooth with no wrinkles or pleats on underside.
IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS.
DraFix Cad10b-ZipJaneR.
STANDARD MEASUREMENT PROCEDURES - BOTTOMS
Rev 10/06
Levi Strauss & Co.2001 Product Integrity Group Product Integrity Manual
Measurements/Bottoms Page 26
BUTTON FLY - Opening All Brands
FLY OPENING
Lay garment flat, face up. Button to be unbuttoned, and fly to be closed. Measure from bottom waistband seam to top of bartack at crotch join.
QUALITY POINTS
Garment must be flat and smooth with no wrinkles or pleats on underside. IF SPECIAL STYLING, REFER TO MEASUREMENT SPECS
DraFix Cad10d-ZipJaneR.