World Leader of Innovative Solutions in Fire Detection and Alarm Systems www.ampac.net

PDS FCS-8000-1

BOSCH AVIOTEC IP Starlight 8000 Video Fire Detection

Features

• Very fast fire and smoke detection - identifies smoke

and fire at the source

• Robust against false alarms

• Covers large monitoring areas

• Outstanding performance under low-light conditions

• 1080p resolution

• Minimise damage onsite

• Reduce rescue response time

• Live streaming and Video storage

Description

The Bosch AVIOTEC IP Starlight 8000 video-based fire detection, is a new solution that supplements existing fire detection technologies. The AVIOTEC provides reliable and early fire detection in challenging environments where standard detection methods can not offer satisfactory reaction times or no other solutions exist. Approved to VDS2344 the procedure for the Testing, Approval and Certification of products and systems for Fire Protection and Security Technologies, the AVIOTEC VFD offers proven detection reliability for all test fires (TF1 through TF8) as specified in ISO AS7240 and EN54 standards. AVIOTEC VFD has the ability to identify both smoke and flames at the source. By detecting fires at the source rather than the ceiling, the camera can issue an alarm within seconds when other standard detection methods can take minutes to detect an alarm condition. This fast reaction time reduces the emergency response time therefore minimising damage, loss of assets and life. Using intelligent algorithms, AVIOTEC can distinguish between real fires and disturbance values like reflections, movements or backlights. This guarantees a very reliable detection with almost no false alarms. On board SD card incident recording is available or the camera can be connected to a Video Recording Management System. The recording functionality provides the ability to playback video streams for root cause analysis and evaluation of an incident. This helps users eliminate and prevent hazardous situations in the future.

With a fast ethernet port the AVIOTEC is easily configurable and can be monitored through network devices such as Client PC’s and mobile devices.

Verification time, sensitivity, detection size and selective masking for smoke and flame are individually configurable to adjust them to the customer needs. Flame and smoke detection can be activated or deactivated separately.

1. Video Recording Manager (VRM) 2. Client PC 3. Mobile Device 4. Fire Alarm CIE

Typical Applications

• Buildings with high ceilings like Art Galleries and Museums

• Dusty and Humid areas

• Saw mills and Paper mills

• Aircraft Hangars

• Extremely large indoor monitoring areas

• Warehouses

World Leader of Innovative Solutions in Fire Detection and Alarm Systems www.ampac.net

Item Number

FCS-8000-VFD-B AVIOTEC IP Starlight 8000 VFD

Technical Specifications

Algorithm Overview

Flame Smoke

Min. Detection Size

(% of picture width)

1.6 2.3

Rising Speed

(% of picture height/s)

- 0.7- 4.2

Audio Streaming

Standard G.711,8kHz sampling rate

L16, 16kHz sampling rate

AAC-LC, 48 kbps at 16 kHz sample rate

AAC-LC, 80 kbps at 16 kHz sample rate

Signal-to-Noise Ratio >50 dB

Audio Streaming Full duplex / half duplex

Environmental (Indoor Use)

Operating

Temperature

-20°C to +50°C (-4°F to 122°F)

Storage Temperature -30°C to +70°C (-22°F to 158°F)

Operating Humidity 20% to 93% RH

Input/Output

Analog video out SMB connector, CVBS (PAL/NTSC),

1Vpp, 75 Ohm

Audio line in 1 Vrms max, 18 kOhm typical

Audio line out 0.85 Vrms at 1.5 kOhm typical

Audio connectors 3.5mm mono jack

Alarm input 2 inputs

Alarm input activation +5 VDC nominal, +40 VDC max. (DC

coupled with 50kOhm pullup resistor to

+3.3 VDC) (<0.5 V is low; > 1.4 V is high)

Alarm output 1 output

Alarm output voltage 30 VAC or +40 VDC max

Ethernet RJ45

Data port RS-232/422/485

Local Storage

Internal RAM 10 sec pre-alarm recording

Memory card slot Supports up to 32 GB microSDHC / 2 TB

microSDXC card. (Class 6 or higher)

Recording Continuous recording , ring recording

and Alarm/Events/Schedule recording

Power

Power Supply 12 VDC; PoE 48 VDC nominal

Current 750mA (12 VDC); 200mA (PoE)

Power consumption 9 W

PoE IEEE 802.3af (802.3at Type 1) Class 3

Network

Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/

RTCP, IGMP V2/V3, ICMP, ICMPv6,

RTSP, FTP, Telnet, ARP, DHCP, APIPA

(Auto-IP, link local address), NTP

(SNTP), SNMP (V1, MIB-II), 802.1x,DNS,

DNSv6, DDNS (DynDNS.org, selfHost.de,

no-ip.com), SMTP, iSCSI, UPnP (SSDP),

DiffServ (QoS), LLDP, SOAP, Dropbox,

CHAP, digest authentication

Encryption TLS 1.0, SSL, DES, 3DES

Ethernet 10/100 Base-T, auto-sensing, half/full

duplex

Connectivity ONVIF Profile S, Auto-MDIX

Mechanical

Dimensions (W x H x L) 78 x 66 x 204 mm

Weight 985 grams

Colour RAL 9006 Metallic Titanium

Tripod Mount Bottom and top 1/4 inch 20 UNC

Software

Unit Configuration Via Web browser or Configuration

Firmware Update Remotely programmable

Software Viewer Web browser, Bosch Video Client, or

Video

Resolution 1080p HD, 720p HD, 480p SD

Streaming H.264(MP); M-JPEG