Upload
trinhthien
View
216
Download
0
Embed Size (px)
Citation preview
ACTION TD1105 EuNetAir
BOOKLET
Palazzo Nervegna-Granafei (City Mayor Headquarters)
Brindisi (Italy), 25 - 26 March 2014
COST OfficeAvenue Louise 1491050 Brussels, Belgiumt: +32 (0)2 533 3800f: +32 (0)2 533 [email protected]
www.cost.eu
ESSEM Domain
COST Action TD1105 European Network on New Sensing Technologies for Air-Pollution Control
and Environmental Sustainability - EuNetAir
SECOND INTERNATIONAL WORKSHOP on New Sensing Technologies for Indoor and Outdoor Air Quality Control
Brindisi (Italy), 25 - 26 March 2014
Palazzo Nervegna-Granafei (City Mayor Headquarters) Via Duomo, 20 - 72100 Brindisi, Italy
organized by ENEA - Brindisi Research Center
supported by Brindisi Municipality
AGENDA 25 March 2014 - Tuesday
08:30 - 18:00 REGISTRATION 09:00 - 09:30 Welcome Address 09:30 - 11:00 Session 1: Plenary Session 11:00 - 11:30 Coffee Break 11:30 - 13:00 Session 2: Oral Presentation 13:00 - 14:30 Lunch 14:30 - 16:00 Session 3: Oral Presentation 16:00 - 16:30 Coffee Break 16:30 - 18:30 Session 4: Oral Presentation 20:30 - 23:00 Social Dinner
26 March 2014 - Wednesday 08:30 - 16:00 REGISTRATION 09:00 - 11:00 Session 5: Oral Presentation 11:00 - 11:30 Coffee Break 11:30 - 13:00 Session 6: Oral Presentation 13:00 - 14:30 Lunch 14:30 - 15:30 Session 7: Poster Presentation 15:30 - 16:00 Discussion and Coffee Farewell
16:00 Closure of Meeting
Background and goals
About COST Action TD1105 EuNetAir COST Action TD 1105 EuNetAir (www.cost.eunetair.it), a Concerted Action on New Sensing Technologies for
Air‐Pollution Control and Environmental Sustainability, is a running Networking funded in the framework
European Cooperation in the field of Scientific and Technical Research (COST) during 2012‐2016.
The main objective of the Concerted Action is to develop new sensing technologies for Air Quality Control
at integrated and multidisciplinary scale by coordinated research on nanomaterials, sensor‐systems, air‐
quality modelling and standardised methods for supporting environmental sustainability with a special
focus on Small and Medium Enterprises.
This international Networking, coordinated by ENEA (Italy), includes over 75 big institutions from 28 COST
Countries (EU‐zone: Austria, Belgium, Bulgaria, Czech Republic, Denmark, Finland, France, Germany,
Greece, Hungary, Iceland, Ireland, Israel, Italy, Latvia, The Former Yugoslav Republic of Macedonia,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovenia, Spain, Sweden, Switzerland, Turkey,
United Kingdom) and 7 Non‐COST Countries (extra‐Europe: Australia, Canada, China, Morocco, Russia,
Ukraine, USA) to create a S&T critical mass in the environmental issues.
About the Second International Workshop of COST Action TD1105 at Brindisi, 25‐26 March 2014 The 2nd International Worskhop on New Sensing Technologies for Indoor and Outdoor Air Quality Control
will be held at ENEA (Italian National Agency for New Technologies, Energy and Sustainable Economic
Development), Brindisi Research Center (Italy). This second workshop of the Action TD1105 EuNetAir
follows the first organized at Barcelona (20 June 2013) as Satellite Event inside Transducers 2013 ‐
Eurosensors XXVII, as planned in the MoU roadmap.
The core‐issues of the COST Action TD1105 on the new sensing technologies for indoor and outdoor
monitoring and air quality control will be surveyed by Action partners with emphasis at sensor materials,
functional materials, nanotechnologies for gas sensors, low‐cost and low‐power chemical sensors, portable
systems, sensor‐instrumentations, air‐pollution modelling, methods, measurements and protocols for air
quality control and environmental monitoring.
Speakers, experts, practitioners, stakeholders and other specialists from environmental agencies, academy
and industry from Europe will be encouraged to participate and give a Talk on current state‐of‐art on the
environmental research and existing critical issues in the ongoing Revision of the Air Quality Directive
2008/50/EC and EU Thematic Strategy on Air Pollution. Fruitful discussions between Action TD1105
participants, international experts, regional managers, speakers, including international institutional
organizations delegates and policy‐makers are strongly expected. A strong impact on focusing of the critical
environmental issues related to the new sensing technologies for indoor and outdoor monitoring and air
quality control would be mutual benefit.
The accepted contributions (Oral/Poster) will be collected in a Booklet to be electronically distributed to
the participants. Researchers, Scientists, External Experts, Managers, Early Stage Researchers will be
involved from COST Countries signing Memorandum of Understanding (MoU) in open and balanced way.
More Information Michele Penza, MC Chair/Proposer of COST Action TD1105 EuNetAir
ENEA ‐ PO BOX 51 Br‐4, I‐72100 Brindisi ‐ ITALY ‐ [email protected]
Marco Alvisi, Action SIG1 Leader and Local Organizing Committee Chair ENEA ‐ PO BOX 51 Br‐4, I‐72100 Brindisi ‐ ITALY ‐ [email protected]
Tuesday, 25 March 2014
COST Action TD1105 EuNetAir WORKSHOP
Palazzo Nervegna-Granafei (City Mayor Headquarters) Via Duomo, 20 - 72100 Brindisi, Italy
08:30 - 18:00 COST Event Registration
09:00 - 09:30 Welcome Address Chairperson: Michele Penza, Action Chair - ENEA, Brindisi, Italy
Welcome: Mayor of City of Brindisi Mimmo Consales, Mayor of Brindisi, Italy
Welcome: ENEA Leander Tapfer, Head of Technical Unit for Materials Technologies - Brindisi Research Center, ENEA, Brindisi, Italy
Welcome: Puglia Regional Government Technical Representative Francesco Surico, InnovaPuglia - Puglia Government for Economic Development, Bari, Italy
09:30 - 11:00 Session 1 - Plenary Session Chairperson: Michele Penza, Action Chair - ENEA, Brindisi, Italy
09:30 - 10:00
COST Action TD1105: European Network on New Sensing Technologies for Air-Pollution Control and Environmental Sustainability. Overview and Plans of COST Action TD1105 Michele Penza, Action Chair, ENEA, Brindisi, Italy
10:00 - 10:30
Artificial Olfaction Systems for Air-Quality Monitoring Applications Krishna Persaud, The University of Manchester, School of Chemical Engineering and Analytical Science, Manchester, United Kingdom
10:30 - 11:00
Can Air Quality Low-cost Sensors Help Citizens to Create Smart Cities ? Nuria Castell-Balaguer, NILU - Norwegian Institute for Air Research, Kjeller, Norway
11:00 - 11:30 Coffee Break
11:30 - 13:00 Session 2 - Clean Air for Smart Cities Chairperson: Michele Penza, Action Chair - ENEA, Brindisi, Italy
11:30 - 12:00
Smart Cities: An Opportunity for Sustainability Mauro Annunziato, European Energy Research Alliance Smart Cities Delegate, ENEA, Rome, Italy
12:00 - 12:20
Low Cost Sensor Networks for Urban Air-Quality Monitoring Applications Vivien Bright, University of Cambridge, Centre for Atmospheric Science, Cambridge, UK
12:20 - 12:40
Enabling High Resolution Urban Pollution Monitoring through Mobile Sensor Networks Adrian Arfire, EPFL, Lausanne, Switzerland
12:40 - 13:00
Development of a Low-cost Mobile Sensor-System for Participatory Measurements of Urban Air Quality Jan Peters, VITO, Mol, Belgium
13:00 - 14:30 Lunch Break
14:30 - 16:00 Session 3 - Sensing Technologies for Indoor Applications Chairperson: Michele Penza, Action Chair - ENEA, Brindisi, Italy
14:30 - 15:00
Chemical Sensors for the Detection and Quantification of Indoor Air Pollutants Thu-Hoa Tran-Thi, CEA-CNRS, CEA-Saclay, Francis Perrin Laboratory URA 2453, 91191 Gif-sur-Yvette, France
15:00 - 15:20
Selective Detection of Indoor VOCs Using a Virtual Gas Sensor Array Martin Leidinger, Saarland University, Saarbrucken, Germany
15:20 - 15:40
Indoor Environment and Health in Elderly Care Centers: The GERIA Project Joao Paulo Teixeira, National Institute of Health, Porto, Portugal
15:40 - 16:00
Indoor Air Quality Assessment: Towards a Better Protection of People Carlos Borrego, IDAD - Institute of Environment and Development, Aveiro, Portugal
16:00 - 16:30 Coffee Break
16:30 - 18:30 Session 4 - Methods and Applications for Environmental Sustainability Chairperson: Michele Penza, Action Chair - ENEA, Brindisi, Italy
16:30 - 16:50
COST Action ES1002 WIRE: Weather Intelligence for Renewable Energies Annamaria Sempreviva, Vice-Chair COST Action ES1002, CNR - Institute of Atmospheric Science and Climate, Lamezia Terme, Italy
16:50 - 17:10
The Urban Control Center: An ICT Platform for Smart Cities in Italy Paolo Deidda, IBM Italia SpA, Rome, Italy
17:10 - 17:30
The Urban Control Center: KPIs for Decisions Support of Smart Cities in Italy Mariagrazia Dotoli and Raffaele Carli, Politecnico di Bari, Bari, Italy
17:30 - 17:50
Development of a Portable Sensor-System for Air Quality Monitoring Domenico Suriano and Michele Penza, ENEA, Brindisi, Italy
17:50 - 18:10
Air Quality in Spanish Cities: First Steps in Smart Sensors Validation Mariacruz Minguillon, CSIC-IDAEA, Barcelona, Spain
18:10 - 18:30
Particulate Matter in Different Atmospheric Reservoirs: Copenhagen, a Highly Populated Area versus Station Nord, a Remote High Arctic Site Andreas Massling, Aarhus University, Roskilde, Denmark
20:30 - 23:00 Social Dinner
Wednesday, 26 March 2014
COST Action TD1105 EuNetAir WORKSHOP
Palazzo Nervegna-Granafei (City Mayor Headquarters) Via Duomo, 20 - 72100 Brindisi, Italy
08:30 - 16:00 COST Event Registration
09:00 - 11:00 Session 5 - Advanced Materials for Chemical Sensors Chairperson: Michele Penza, Action Chair - ENEA, Brindisi, Italy
09:00 - 09:30
Towards Zero-Power Gas Detection Systems Based on Single Nanowires Albert Romano-Rodriguez, Universitat de Barcelona, Department of Electronics, Barcelona, Spain
09:30 - 10:00
Gas Sensing with Epitaxial Graphene on Silicon Carbide: Performance Tuning for Air Quality Control Jens Eriksson2, D. Puglisi2, C. Bur1,2, M. Andersson2, A. Lloyd Spetz2, and A. Schütze1, 1Saarland University, Saarbrucken, Germany; 2Linkoping University, Linkoping, Sweden
10:00 - 10:20
Sensing Devices based on Metallophthalocyanine and Phthalocyanine/Nanocarbons Hybrid Materials: Application to the Aromatic Hydrocarbon Detection Jerome Brunet, Universitè Blaise Pascal, LASMEA-CNRS, Aubiere, France
10:20 - 10:40
Detection of Low Concentrations of Volatile Organic Compounds with SiC-Field Effect Transistors Donatella Puglisi2, C. Bur1,2, J. Eriksson2, M. Andersson2, A. Lloyd Spetz2, and A. Schütze1, 1Saarland University, Saarbrucken, Germany; 2Linkoping University, Linkoping, Sweden
10:40 - 11:00
Electrodeposited Nanostructured Materials for Gas Sensing Nicola Cioffi, University of Bari, Department of Chemistry, Bari, Italy
11:00 - 11:30 Coffee Break
11:30 - 13:00 Session 6 - Sensors and Systems for Air Quality Control Chairperson: Michele Penza, Action Chair - ENEA, Brindisi, Italy
11:30 - 12:00
Low-Power and Portable AlGaN/GaN Based Sensor-Systems for Air Monitoring Rob van Schaijk, IMEC Holst-Centre, Eindhoven, The Netherlands
12:00 - 12:20
CMOS-based Sensors for Ubiquitous Gas Detection - Challenges and Opportunities Mohamed Foysol Chowdhury, Cambridge CMOS Sensors Ltd, Cambridge, UK
12:20 - 12:40
Graphene-based Gas Sensors Tiziana Polichetti, ENEA, Portici (Naples), Italy
12:40 - 13:00
Computational Approaches to Wireless Chemical Sensing Challenges Saverio De Vito, ENEA, Portici (Naples), Italy
13:00 - 14:30 Lunch Break
14:30 - 15:30 Session 7 - Poster Session Chairperson: Michele Penza, Action Chair - ENEA, Brindisi, Italy
Posters will be presented by Quick Presentations (8-10 minutes, max 10 templated slides) by presenters, preferably Early Stage Researchers. Posters are listed by theme and as-received.
MATERIALS, SENSORS AND SYSTEMS FOR AIR QUALITY MONITORING
P01
Electrophoretic Au NPs Deposition on Carbon Nanotubes for NO2 Sensors Elena Dilonardo (1), Michele Penza (2), Marco Alvisi (2), Domenico Suriano (2), Riccardo Rossi (2), Francesco Palmisano (1), Luisa Torsi (1), Nicola Cioffi (1); (1)University of Bari, Bari, Italy; (2)ENEA, Brindisi, Italy
P02
Pd-Doped ZnO Nanorods for VOCs Sensing Sadullah Ozturk (1), Zafer Z. Ozturk (1), Marco Alvisi (2), Domenico Suriano (2), Michele Penza (2), (1)GEBZE Institute of Technology, Kocaeli, Turkey; (2)ENEA, Brindisi, Italy
P03
ZnO Nanorods for Gas Sensors R. Yatskiv, M. Verde, J. Grym, Synthesis and characterization of nanomaterials, Institute of Photonics and Electronics AVCR, Prague, Czech Republic
P04
Nanostructured Schottky Contacts for Gas Sensors J. Grym, R. Yatskiv, O. Cernohorsky, M. Verde, Synthesis and characterization of nanomaterials, Institute of Photonics and Electronics AVCR, Prague, Czech Republic
15:30 - 16:00 Discussion on R&I Needs of COST Action TD1105 Chairperson: Michele Penza, Action Chair - ENEA, Brindisi, Italy
15:30 - 15:40
Research & Innovation Priorities from COST Action TD1105 Michele Penza, ENEA, Brindisi, Italy
15:40 - 15:50
Research & Innovation Needs from COST Action TD1105 Marco Alvisi, ENEA, Brindisi, Italy
15:50 - 16:00
Discussions from COST Action TD1105 Partners/Stakeholders
16:00 Closure of COST Action TD1105 EuNetAir WORKSHOP
SECOND INTERNATIONAL WORKSHOP on New Sensing Technologies for Indoor and Outdoor Air Quality Control
Brindisi (Italy), 25 - 26 March 2014
Palazzo Nervegna-Granafei (City Mayor Headquarters) Via Duomo, 20 - 72100 Brindisi, Italy
Action Second Workshop Programme Committee COST Action TD1105 EuNetAir Steering Committee Michele Penza, ENEA, Brindisi, Italy Marco Alvisi, ENEA, Brindisi, Italy Anita Lloyd Spetz, Linkoping University, Sweden Juan Ramon Morante, IREC and Universitat de Barcelona, Spain Eduard Llobet, Universitat Roviri I Virgili, Tarragona, Spain Andreas Schuetze, Saarland University, Germany Ole Hertel, Aarhus University, Denmark Ingrid Bryntse, SenseAir AB, Sweden Jan Theunis, VITO, Belgium
Local Organizing Committee Marco Alvisi, ENEA, Brindisi, Italy - Local Chair Domenico Suriano, ENEA, Brindisi, Italy - Local Member Annamaria Demarinis Loiotile, University of Bari, Italy - Secretary Juliane Rossbach, Eurice, Saarbrucken, Germany - Grant Holder Corinna Hahn, Eurice GmbH, Saarbrucken, Germany - Grant Holder
URL: www.cost.eunetair.it
Michele Penza, ENEA, Brindisi, Italy - Action Chair Anita Lloyd Spetz, Linkoping University, Sweden - Action Vice-Chair Juan Ramon Morante, IREC, Spain Andreas Schuetze, Saarland University, Germany Ole Hertel, Aarhus University, Denmark Ingrid Bryntse, SenseAir AB, Sweden Jan Theunis, VITO, Belgium Marco Alvisi, ENEA, Brindisi, Italy Gianluigi De Gennaro, University of Bari, Italy Fabio Galatioto, Newscastle University, UK Ralf Moos, University of Bayreuth, Germany Mar Viana, CSIC-IDAEA, Barcelona, Spain Iveta Steinberga, University of Latvia, Riga, Latvia Roberto Simmarano, Sensichips, Aprilia (Rome), Italy Julian Gardner, University of Warwick, UK Rod Jones, University of Cambridge, UK Giorgio Sberveglieri, University of Brescia, Italy Eduard Llobet, Universitat Roviri I Virgili, Tarragona, Spain Thomas Kuhlbusch, IUTA eV, Duisburg, Germany Albert Romano-Rodriguez, Universitat de Barcelona (UB), Spain Annamaria Demarinis Loiotile, University of Bari, Italy - Secretary Corinna Hahn, Eurice GmbH, Saarbrucken, Germany - Grant Holder
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Welcome from Action Chair
WELCOME ADDRESS
This is a great honor and my pleasure to chair and welcome to ALL PARTICIPANTS of the Second International Workshop of our COST Action TD1105 European Network on New Sensing Technologies for Air-Pollution Control and Environmental Sustainability - EuNetAir.
This COST Workshop - held on 25-26 March 2014 - on New Sensing Technologies for Indoor and Outdoor Air Quality Control is supported by Municipality of Brindisi and hosted at Palazzo Nervegna-Granafei, Representative Headquarters of Municipality of Brindisi (Italy) with the Local Organizing Support from ENEA, Brindisi Research Center.
This Second Workshop follows the first COST Workshop in Barcelona (20 June 2013), and it is attended from at least 40 Participants and includes 7 Sessions with 2 Keynote Speakers, 6 Invited Speakers, 19 Oral Speakers and 4 Poster Presenters from at least 14 COST Countries. An international Advisory Board (Steering Committee) composed by 22 Members has served with S&T inputs to define Workshop Programme. Female participants are as 28% and Male participants are as 72% with a quota of Early Stage Researchers as 35%.
The concerted COST Action TD1105 EuNetAir - related to R&D issues of the air quality monitoring including environmental technologies, nanomaterials, functional materials, gas sensors, smart systems, air-pollution modelling, measurements, methods, standards and protocols - is very pleased to connect international specialists and excellent scientists to create a networking of Pan-European R&D platform from 28 COST Countries and 7 Non-COST Countries. Most part of COST Countries are represented in this Workshop.
Special thanks to COST Office Representative (Dr. Deniz Karaca, ESSEM Science Officer) involved as Science Officer in our Action. This COST interest in Brindisi Workshop is expressed by a valuable Letter of Support signed by COST Office Director (Dr. Monica Dietl) through COST Science Operations Head (Prof. Tatiana Kovacikova) in Brussels.
On behalf of the Action Management Committee, I would like to thank ALL Workshop Participants, Grant Holder and Action Scientific Secretary, Local Organizing Committee by ENEA, InnovaPuglia as Local Economic Development Office from Regione Puglia, and Municipality of Brindisi, represented by Mayor of Brindisi City, to host and support this Action Workshop, in order to give us the opportunity to disseminate the results of the COST Action TD1105 EuNetAir towards a wide international targeted audience involved in the Air Quality Control, with special focus on Clean Air for Smart Cities, as local hot-issue. With their valuable scientific work and management, kind availability and great enthusiasm will make our Action Workshop very successful !
Enjoy your EuNetAir COST Workshop at Palazzo Nervegna-Granafei in Brindisi !
Brindisi, 18 March 2014
Michele Penza, ENEA, Brindisi, Italy COST Action TD1105 Chair [email protected]
EuNetAir COST Action TD1105 Logo
ENEA, Brindisi Research Center - Palazzo Nervegna-Granafei, Municipality of Brindisi, 25-26 March 2014
COST Action TD1105 EuNetAir
2nd
International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
LIST OF PRESENTERS
Welcome Address Session
Welcome Address from Mayor of City of Brindisi Mimmo Consales, Mayor of Brindisi, Italy Welcome Address from ENEA Leander Tapfer, Head of Technical Unit for Materials Technologies - Brindisi Research Center, ENEA, Brindisi, Italy Welcome Address from Puglia Regional Government Technical Representative Francesco Surico, InnovaPuglia - Puglia Government for Economic Development, Bari, Italy Session 1 – Plenary Session COST Action TD1105: European Network on New Sensing Technologies for Air-Pollution Control and Environmental Sustainability. Overview and Plans of COST Action TD1105 Michele Penza, Action Chair, ENEA, Brindisi, Italy Artificial Olfaction Systems for Air-Quality Monitoring Applications Krishna Persaud, The University of Manchester, School of Chemical Engineering and Analytical Science, Manchester, United Kingdom Can Air Quality Low-cost Sensors Help Citizens to Create Smart Cities? Nuria Castell-Balaguer, NILU - Norwegian Institute for Air Research, Kjeller, Norway Session 2 - Clean Air for Smart Cities Smart Cities: An Opportunity for Sustainability Mauro Annunziato, European Energy Research Alliance Smart Cities Delegate, ENEA, Rome, Italy Low Cost Sensor Networks for Urban Air-Quality Monitoring Applications Vivien Bright, University of Cambridge, Centre for Atmospheric Science, Cambridge, UK Enabling High Resolution Urban Pollution Monitoring through Mobile Sensor Networks Adrian Arfire, EPFL, Lausanne, Switzerland Development of a Low-cost Mobile Sensor-System for Participatory Measurements of Urban Air Quality Jan Peters, VITO, Mol, Belgium Session 3 - Sensing Technologies for Indoor Applications Chemical Sensors for the Detection and Quantification of Indoor Air Pollutants Thu-Hoa Tran-Thi, CEA-CNRS, CEA-Saclay, Francis Perrin Laboratory URA 2453, 91191 Gif-sur-Yvette, France Selective Detection of Indoor VOCs Using a Virtual Gas Sensor Array Martin Leidinger, Saarland University, Saarbrucken, Germany
COST Action TD1105 EuNetAir
2nd
International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Indoor Environment and Health in Elderly Care Centers: The GERIA Project Joao Paulo Teixeira, National Institute of Health, Porto, Portugal Indoor Air Quality Assessment: Towards a Better Protection of People Carlos Borrego, IDAD - Institute of Environment and Development, Aveiro, Portugal Session 4 - Methods and Applications for Environmental Sustainability COST Action ES1002 WIRE: Weather Intelligence for Renewable Energies Annamaria Sempreviva, Vice-Chair COST Action ES1002, CNR - Institute of Atmospheric Science and Climate, Lamezia Terme, Italy The Urban Control Center: An ICT Platform for Smart Cities in Italy Paolo Deidda, IBM Italia SpA, Rome, Italy The Urban Control Center: KPIs for Decisions Support of Smart Cities in Italy Mariagrazia Dotoli and Raffaele Carli, Politecnico di Bari, Bari, Italy Development of a Portable Sensor-System for Air Quality Monitoring Domenico Suriano and Michele Penza, ENEA, Brindisi, Italy Air Quality in Spanish Cities: First Steps in Smart Sensors Validation Mariacruz Minguillon, CSIC-IDAEA, Barcelona, Spain Particulate Matter in Different Atmospheric Reservoirs: Copenhagen, a Highly Populated Area versus Station Nord, a Remote High Arctic Site Andreas Massling, Aarhus University, Roskilde, Denmark Session 5 - Advanced Materials for Chemical Sensors Towards Zero-Power Gas Detection Systems Based on Single Nanowires Albert Romano-Rodriguez, Universitat de Barcelona, Department of Electronics, Barcelona, Spain Gas Sensing with Epitaxial Graphene on Silicon Carbide: Performance Tuning for Air Quality Control Jens Eriksson2, D. Puglisi2, C. Bur1,2, M. Andersson2, A. Lloyd Spetz2, and A. Schütze1, 1Saarland University, Saarbrucken, Germany; 2Linkoping University, Linkoping, Sweden Sensing Devices based on Metallophthalocyanine and Phthalocyanine/Nanocarbons Hybrid Materials: Application to the Aromatic Hydrocarbon Detection Jerome Brunet, Universitè Blaise Pascal, LASMEA-CNRS, Aubiere, France Detection of Low Concentrations of Volatile Organic Compounds with SiC-Field Effect Transistors Donatella Puglisi2, C. Bur1,2, J. Eriksson2, M. Andersson2, A. Lloyd Spetz2, and A. Schütze1, 1Saarland University, Saarbrucken, Germany; 2Linkoping University, Linkoping, Sweden Electrodeposited Nanostructured Materials for Gas Sensing Nicola Cioffi, University of Bari, Department of Chemistry, Bari, Italy Session 6 - Sensors and Systems for Air Quality Control Low-Power and Portable AlGaN/GaN Based Sensor-Systems for Air Monitoring Rob van Schaijk, IMEC Holst-Centre, Eindhoven, The Netherlands
COST Action TD1105 EuNetAir
2nd
International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
CMOS-based Sensors for Ubiquitous Gas Detection - Challenges and Opportunities Mohamed Foysol Chowdhury, Cambridge CMOS Sensors Ltd, Cambridge, UK Graphene-based Gas Sensors Tiziana Polichetti, ENEA, Portici (Naples), Italy Computational Approaches to Wireless Chemical Sensing Challenges Saverio De Vito, ENEA, Portici (Naples), Italy Session 7 - Poster Session MATERIALS, SENSORS AND SYSTEMS FOR AIR QUALITY MONITORING P01: Electrophoretic Au NPs Deposition on Carbon Nanotubes for NO2 Sensors Elena Dilonardo (1), Michele Penza (2), Marco Alvisi (2), Domenico Suriano (2), Riccardo Rossi (2), Francesco Palmisano (1), Luisa Torsi (1), Nicola Cioffi (1); (1)University of Bari, Bari, Italy; (2)ENEA, Brindisi, Italy P02: Pd-Doped ZnO Nanorods for VOCs Sensing Sadullah Ozturk (1), Zafer Z. Ozturk (1), Marco Alvisi (2), Domenico Suriano (2), Michele Penza (2), (1)GEBZE Institute of Technology, Kocaeli, Turkey; (2)ENEA, Brindisi, Italy P03: ZnO Nanorods for Gas Sensors R. Yatskiv, M. Verde, J. Grym, Synthesis and characterization of nanomaterials, Institute of Photonics and Electronics AVCR, Prague, Czech Republic P04: Nanostructured Schottky Contacts for Gas Sensors J. Grym, R. Yatskiv, O. Cernohorsky, M. Verde, Synthesis and characterization of nanomaterials, Institute of Photonics and Electronics AVCR, Prague, Czech Republic Discussion on R&I Needs of COST Action TD1105 Research & Innovation Priorities from COST Action TD1105 Michele Penza, ENEA, Brindisi, Italy Research & Innovation Needs from COST Action TD1105 Marco Alvisi, ENEA, Brindisi, Italy Discussions from COST Action TD1105 Partners/Stakeholders
COST Action TD1105 EuNetAir
2nd
International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
ABSTRACTS OF
INVITED TALKS
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
COST ACTION TD1105 ON NEW SENSING TECHNOLOGIES FOR
AIR-POLLUTION CONTROL AND ENVIRONMENTAL
SUSTAINABILITY: OVERVIEW AND PLANS OF ACTION
M. Penza
ENEA - Italian National Agency for New Technologies, Energy and Sustainable Economic
Development, Technical Unit for Materials Technologies-Brindisi Research Center, PO Box
51 Br-4, I-72100 Brindisi, Italy. Email: [email protected]
Abstract
This is a short overview of the COST Action TD1105 EuNetAir - European Network on New
Sensing Technologies for Air-Pollution Control and Environmental Sustainability - funded in
the framework European Cooperation in the field of Scientific and Technical Research
(COST) during the period 2012-2016.
The main objective of the Concerted Action is to develop new sensing technologies for Air
Quality Control at integrated and multidisciplinary scale by coordinated research on
nanomaterials, sensor-systems, air-quality modelling and standardised methods for supporting
environmental sustainability with a special focus on Small and Medium Enterprises.
This international Networking, coordinated by ENEA (Italy), includes over 80 big institutions
and over 170 international experts from 28 COST Countries (EU-zone: Austria, Belgium,
Bulgaria, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Israel, Italy, Latvia, The Former Yugoslav Republic of Macedonia, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovenia, Spain, Sweden, Switzerland, Turkey,
United Kingdom) and 7 Non-COST Countries (extra-Europe: Australia, Canada, China,
Morocco, Russia, Ukraine, USA) to create a S&T critical mass in the environmental issues.
This COST Action [1, 2] (see logo in Fig. 1) will focus on a new detection paradigm based on
sensing technologies at low cost for Air Quality Control (AQC) and set up an interdisciplinary
top-level coordinated network to define innovative approaches in sensor nanomaterials, gas
sensors, devices, wireless sensor-systems, distributed computing, methods, models, standards
and protocols for environmental sustainability within the European Research Area (ERA).
The state-of-the-art showed that research on innovative sensing technologies for AQC based
on advanced chemical sensors and sensor-systems at low-cost, including functional materials
and nanotechnologies for eco-sustainability applications, the outdoor/indoor environment
control, olfactometry, air-quality modelling, chemical weather forecasting, and related
standardisation methods is performed already at the international level, but still needs serious
efforts for coordination to boost new sensing paradigms for research and innovation. Only a
close multidisciplinary cooperation will ensure cleaner air in Europe and reduced negative
effects on human health for future generations in smart cities, efficient management of green
buildings at low CO2 emissions, and sustainable economic development.
Figure 1. COST Office, ESSEM Domain and Action TD1105 EuNetAir Logo.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
The aim of the Action is to create a cooperative network to explore new sensing technologies
for low-cost air-pollution control through field studies and laboratory experiments to transfer
the results into preventive real-time control practices and global sustainability for monitoring
climate changes and outdoor/indoor energy efficiency. Establishment of such a European
network, involving Non-COST key-experts, will enable EU to develop world capabilities in
urban sensor technology based on cost-effective nanomaterials and contribute to form a
critical mass of researchers suitable for cooperation in science and technology, including
training and education, to coordinate outstanding R&D and promote innovation towards
industry, and support policy-makers. Main objectives of Action are listed, but not limited to:
to establish a top-level Pan-European multidisciplinary R&D platform on new sensing
paradigm for AQC contributing to sustainable development, green-economy and social
welfare
to create collaborative research teams in the ERA on the new sensing technologies for
AQC in an integrated approach to avoid fragmentation of the research efforts
to train Early Stage Researchers (ESR) and new young scientists in the field for
supporting competitiveness of European industry by qualified human potential
to promote gender balance and involvement of ESR in AQC
to disseminate R&D results on AQC towards industry community and policy makers as
well as general public and high schools.
The Workplan is organized in four complementary Working Groups (WGs), each devoted to a
progressive development of synthesis, characterization, fabrication, integration, prototyping,
proof-of-concepts, modeling, measurements, methods, standards, tests and application
aspects. The four WGs with the specific objectives are:
WG1: Sensor materials and nanotechnology
WG2: Sensors, devices and sensor-systems for AQC
WG3: Environmental measurements and air-pollution modeling
WG4: Protocols and standardisation methods
This Action will focus on the study of sensor nanomaterials and nanotechnologies exhibiting
unique properties in terms of chemical and thermal stability, high sensitivity, selectivity.
Nanosize effects of functional materials will be explored for integration in the gas sensors at
low power-consumption. Furthermore, specific nanostructures with tailored sensing properties
will be developed for gas sensors and sensor-systems with advanced functionalities.
Selected high-quality research products and innovative technologies developed by the
partnership of COST Action TD1105 are shown in the Figure 2.
Figure 2. Selected R&D technological products developed by some partners (academia, research institutes,
agencies, industry) involved in the COST Action TD1105 EuNetAir. Courtesy from EuNetAir partnership.
References 1. Action Memorandum of Understanding: http://www.cost.eu/domains_actions/essem/Actions/TD1105
2. Action website: http://www.cost.eunetair.it
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
ARTIFICIAL OLFACTION SYSTEMS FOR AIR-QUALITY MONITORING APPLICATIONS
K.C. Persaud, P. Fiadzomor, R. Sims, A. Azapagic School of Chemical Engineering and Analytical Science, The University of Manchester,
Oxford Road, Manchester M13 1PL, UK; [email protected]
Abstract The effects of indoor air quality on human health are of increasing concern (Jones et al., 2002). Air quality studies conducted in London demonstrated that a large proportion of homes (18%) exceeded one or more of the WHO guideline values for carbon monoxide (Croxford et al., 2006). CO concentrations indoors are highest in homes that have faulty or poorly vented combustion appliances, but also homes where smoking takes place Similarly, concentrations of nitrogen dioxide and sulphur dioxide can be significant in the indoor and outdoor environment and are considered as being hazardous to health. Volatile organic compounds are a group of chemicals that are both diverse and numerous, have many sources and are also potentially harmful to human health. These substances can arise from sources including paints, varnishes, solvents, and preservatives (Jones et al., 2002). Arrays of gas sensors are useful in the context of environmental monitoring, as the data captured can be processed in a multivariate way in analogy to artificial olfactory systems. This paper introduces a system for continuously monitoring these pollutant gases and vapours in the home.
Materials and Methods Air quality monitoring was performed using sensor units developed by a team at CEAS, The University of Manchester (Fiadzomor et al., 2011). Air quality monitoring is conducted to collect primary emission data from homes utilising gas and electricity for heating and cooking. The sensor units measure SO2 (sulphur dioxide), NO2 (nitrogen dioxide), CO (carbon monoxide), CO2 (carbon dioxide), TVOCs (total volatile organic compounds), relative humidity and temperature. Each unit enables the measuring of gas emissions every 60 seconds over a 14 day period using a micro-pump to draw sample air from the environment across sensors. The data are stored ready for analysis on completion of each monitoring period. This approach is further assisted through the use of detailed user diaries that indicate key cooking and heating events during the monitoring. Two sensor units are placed within the house (kitchen and living room) and one outdoors in the vicinity of the home.
Results Figure 1 shows Total VOC concentrations measured in a home over the summer period over
13 A
ug
16 A
ug
19 A
ug
22
Aug
25
Aug
28
Aug
31
Aug
0
1
2
3
4
5
6
7
8
13
Aug
16
Aug
19
Aug
22
Aug
25
Aug
28
Aug
31
Aug
0.0
0.2
0.4
[VO
Cs]
/ pp
m
[VO
Cs]
/ pp
m
outdoor sitting room kitchen
Figure 1 Total VOC’s measured over a two week period.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
two weeks, while Figure 2 shows the large differences of CO2 concentrations found outside the house, within the kitchen and in the sitting room.
13 A
ug
16 A
ug
19 A
ug
22 A
ug
25 A
ug
28 A
ug
31 A
ug
0
200
400
600
800
1000
1200
1400
[CO
2]/
ppm
outside sitting room kitchen
Figure 2 CO2 concentrations in different locations inside and outside the house
Comparing the indoor air monitoring results obtained from a sample of houses that were recorded during the summer as well as in the winter, it was found that the ‘all gas’ fuelled houses studied were similar in terms of the concentration changes in CO, CO2 and NO2. A greater increase in CO to the indoor environment is evident during cooking events especially within the ‘all gas’ homes and this appears to match the households use of the gas oven or hob. Moreover, winter results from all homes indicate high indoor concentrations as would be expected with lower ventilation rates - this is particularly true for CO. Further analysis shows variation in CO and NO2 within the ‘all gas’ homes, again possibly related to the use of natural gas during cooking. Elsewhere, temperature and humidity changes are moderately consistent across all homes and the same is true for SO2 concentrations.
References 1. A. Jones, A., J. Austin, P. Brimblecombe, and W. Sturges. Chapter 3 Indoor air quality and health.
Developments in Environmental Sciences. (2002) Elsevier. 2. B. Croxford, E. Hutchinson, G. Leonardi, L. McKenna, L. Nicholson, G. Volans and P. Wilkinson.
(2006). Real time carbon monoxide measurements from 270 UK homes. Bartlett School of Graduate Studies, Medical Toxicology Unit, Guy’s & St Thomas’ Hospital, London School of Hygiene & Tropical Medicine, South London and Maudsley NHS Trust. Indoor Environmental Quality: Problems, Research, and Solutions Conference 2006, Durham, North Carolina, USA.
3. P. Fiadzomor, R. Sims, S. Daniels, A. Azapagic and K. Persaud. Indoor Air Quality Monitoring. Sustainable Cities, (2011) ARUP, London.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Invited Talk
CAN LOW-COST AIR QUALITY SENSORS HELP CITIZENS TO
CREATE SMART CITIES? N. Castell, H-Y. Liu, M. Kobernus, P. Schneider, W. Lahoz, S. Grossberndt and A. Bartonova
NILU-Norwegian Institute for Air Research, PO Box 100, NO-2027 Kjeller; [email protected]
Abstract
In Europe, the majority of the population lives in areas where air quality levels frequently
exceed WHO’s ambient air quality guidelines (EEA, 2013). Current air pollution monitoring
networks consist of few stations equipped with highly technologically advanced but costly air
quality monitors, which provide accurate data, but only in few, static locations (Castell et al.,
2013). In addition, a number of cities has capabilities to provide spatially distributed
information using models, but in general, data at the citizen level is currently scarce or non-
existent. This is a severe limitation in important cases when individual information is
required, e.g., for assessment of human exposure to atmospheric pollutants or to provide
advice to special groups with high exposure risks.
The emergence of lower-cost, easy-to-use, portable air pollution monitors (sensor platforms)
allowing observations at high spatial resolution in real-time provides new opportunities to
enhance our existing air quality monitoring networks. Sensor devices are currently available
to monitor a range of air pollutants and new devices are continually being introduced
(Aleixandre and Gerboles, 2012). However, challenges remain regarding the use of sensors
and sensor data, mainly data quality and derivation of meaningful information from datasets
(Snyder et al., 2013).
This paper presents the efforts taking place in the city of Oslo, Norway, with the campaign
results expected by the end of 2015. The work is being developed under two related EU-
funded projects: CITI-SENSE and Citi-Sense-MOB. Key to both projects is the use of novel
lower-cost sensors and Information and Communication Technologies (ICT) to enable
citizens to directly contribute to environmental monitoring.
CITI-SENSE builds on the concept of Citizens’ Observatories to empower citizens to
contribute to environmental governance, and enable them to support community-based
decision-making. CITI-SENSE will develop, test, demonstrate and validate a community-
based environmental monitoring and information system using low-cost sensors and novel
Earth Observation applications.
Citi-Sense-MOB will develop new mobile services to support green growth and sustainable
development in the Oslo region. The project aims at providing citizens, and other stakeholders
with information on environmental quality. In order to accomplish the goal of creating a
dynamic city infrastructure for real-time urban environment and health management, Citi-
Sense-MOB will create and use innovative technology to continuously measure, share and
communicate environmental data with both citizens and public authorities.
Figure 1 illustrates the common methodology used in both projects. The measuring system is
composed of low-cost sensors deployed in the city (e.g., streetlamp, building balconies, etc.),
carried by people and mounted on mobile platforms (e.g., buses, bicycles, cars, etc.). The
continuously gathered data are then transmitted to a server for processing (e.g., automatic
quality control, generation of maps and graphics, etc.). The processed data are sent back to the
users (i.e., citizens, cyclists, city authorities, bus companies, etc.) and presented in an user-
friendly and visually informative layout using both web solutions and mobile phone apps.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Invited Talk
Figure 1. CITI-SENSE and Citi-Sense-MOB system overview - Oslo case study (COT: citizens’ observatories
toolbox; VGI: Volunteered Geographical Information; GNSS: Global Navigation Satellite System).
CITI-SENSE and Citi-Sense-MOB will test how new technologies, such as low-cost sensors
and innovative ICT, can help improve city management using near-real-time measurements.
They will further test the feasibility of different sensor technologies and approaches and
explore how these data contribute to air quality monitoring and complement existing air
quality monitoring networks. By exploring how these data can contribute to a more
comprehensive understanding of air quality monitoring, we hope to show that complementing
existing air quality monitoring networks is not just feasible, but highly desirable.
CITI-SENSE and Citi-Sense-MOB projects are setting the stage for innovative developments
in air quality monitoring and individual exposure assessment. The data gathered from the
projects will be made available using Open Linked Data standards, and will thus contribute to
a range of novel services in monitoring, transport, personal well-being and city planning.
Acknowledgments
Citi-Sense-MOB (http://www.citi-sense-mob.eu) is a collaborative project partly funded by
The European Mobile and Mobility Industries Alliance (EMMIA).
CITI-SENSE (http://www.citi-sense.eu) is a Collaborative Project partly funded by the EU
FP7-ENV-2012 under grant agreement no 308524.
References Aleixandre, M. and Gerboles, M. 2012. Chemical Engineering Transaction. Vol. 30.
Castell et al., 2013. ETC/ACM Technical Paper 2013/16
EEA, 2013. Air quality in Europe-2013. EEA Report No 9/2013
Snyder et al. 2013. Environmental Science and Technology. Vol. 47, 11369-11377
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk The Urban Networks Approach in the EERA European Smart Cities Joint
Programme
Mauro Annunziato ENEA, Responsible for the “Urban Energy Network” Sub-Programme
of the EERA Smart Cities Joint Programme Via Anguillarese 301, Rome, Italy
Abstract According to a recent European Commission survey, about seventy percent of energy consumption takes places in the cities. A crucial element in reducing this impact - while of course maintaining or improving the quality of the functions offered to citizens - is conceiving of a city as a complex set of interlinked networks. Those can be infrastructure-related (villages, neighbourhoods, roads), material (flows of goods, vehicles, water or energy) or intangible (data communication). This concept of “interconnected urban networks” is crucial to understanding and adapting energy consumption, storage and production in urban areas. The basic challenge of making cities smart is therefore a matter of integrating sustainability and connectivity, taking into account the dynamic behaviour of the system and fluctuating consumption and production patterns. At present many new technologies and applications are being developed that will improve the interconnection among networks; that allow for the delivery of innovative multifunctional services such as the optimal management of energy consumption, storage and local grid to mitigate environmental impact; or that offer services related to mobility, sustainability education. Each city can be considered as an organism, with its complexity and its interlinked networks, also and maybe primarily at energy level. Each city has its own energy metabolism, characterised by energy production, storage and consumption with their corresponding “interconnected networks”: they can work properly by means of suitable interconnected sensor networks to collect data aimed at optimizing the operational logics of a smart and energy conscious management at urban level (organic management of mobility, energy production sites, energy transport network, energy consumption sites, water, waste, etc.). Additionally, each city is in direct connection with its surroundings and beyond that embedded into superposed energy systems at larger levels (e.g. continental). These interconnections provide a spectrum of renewable energy sources from other regions, but might also act as a sink for surplus energy from the city. Within this scenario, the general objective of this sub-programme is to develop the approaches, methodologies, technologies and pilot cases in order to optimize energy metabolism of cities toward low impact urban districts integrating all accessible sources of renewable energy and providing flexible balancing potentials, by means of an energy conscious operation & management fed by data networks spread at urban level. This study is focussed on the main research lines of the Urban Energy Networks as a Sub-Programme of the European Joint Programme on Smart Cities (http://www.eera-set.eu/index.php?index=30). The starting off of the Smart Cities Joint Programme was held in September 2010. The research framework of the programme has been shaped throughout a series of further workshops from December 2010 till September 2011. The entire Joint programme is structured in 4 sub-programmes with a clear focus on energy efficiency and integration of renewable energy sources within urban areas. The main objective is the
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk development of scientific tools and methods that will enable an intelligent design, planning and operation of the energy system of an entire city in the near future. An integrated approach will be adopted for the planned research activities in order to capture the interfaces between all the relevant elements of the energy system, such as thermal and electric energy networks, buildings, energy supply technologies and the end-user. At the moment includes activities of about 200 European Researchers from 20 European Countries. The research activities of the Urban Energy Networks Programme will mainly focus on three main tasks: 1) Smart Energy Districts - it aims at developing suitable models for optimal management of low impact "Smart Energy Districts" (a settlement of different utilities such as private and public residential buildings, private and public office buildings, schools, hospitals, shopping centres, organized as a single user); solutions for a smart coupling of energy (both electrical and thermal) production, storage and consumption will be investigated and developed; mobility at district level will be also analysed in terms of energy consumption patterns. Such model includes the ability to instance a cohort of bidirectional thermal building model in order to capture with a reasonable accuracy the power demand and the main effect of potential refurbishment. 2) Urban network integration - it aims at studying and developing opportunities related to the implementation of data acquisition systems at urban level (multi-information sensors networks), connected to data transmission, storage, elaboration and analysis; this structure will be synthesized through an integrated ICT multifunctional platform for network integration coupled with district GIS; this platform will feed an integrated management system to optimize the balance between energy offer and demand also considering different forms of energy (e.g. electricity, fuel, heat) and taking into account end user expectations and behaviour. 3) Human factors: the citizen-city interaction - it aims at deepening the knowledge about human factors influencing energy uses and at developing "human oriented technologies" based on citizen needs and expectation for the improvement the quality of life oriented to low energy impacts. The milestones of the Urban Energy Networks programme may be synthesized as follow: Development of a methodological approach for the integration of energy networks at
urban level. Developments of innovative solutions to optimize the link between energy offer,
distribution, storage and demand (both electrical and thermal energy) in smart urban networks, taking into account the convertibility (e.g. heat pumps) and coupling (e.g. cogeneration) between different energy forms and promoting energy demand response.
Development of multifunctional ICT platforms and integrated logics for electrical and thermal energy management in smart urban networks taking in account the physical constraint specific to energy network (electrical, thermal) so that quality of energy delivered to customer is provided in a resilient way.
Ambient intelligence solutions to take into account citizen needs and expectation in low impact cities.
Pilot experiments related to smart urban networks.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
LOW-COST SENSOR NETWORKS FOR URBAN AIR-QUALITY MONITORING APPLICATIONS
V. B. Bright1, R. L. Jones, O. A. M. Popoola1, M. I. Mead1, I. Heimann1, G. B. Stewart1, R. North2 , P. H. Kaye3, D. Carruthers4, R. P. Baron5, J. Saffell5
1Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge; [email protected]
2Centre for Transport Studies, Department of Civil and Environmental Engineering, Imperial College, London; [email protected]
3Science and Technology Research Institute, University of Hertfordshire, Hatfield, Hertfordshire; [email protected]
4Cambridge Environmental Research Consultants, 3 King’s Parade, Cambridge; [email protected]
5Alphasense Ltd, Sensor Technology House, 300 Avenue West Skyline 120, Great Notley, Essex; [email protected]
Abstract Atmospheric composition within urban areas has a direct effect on the air quality of an environment in which a large majority of people live and work. Atmospheric pollutants including ozone (O3), nitrogen dioxide (NO2), volatile organic compounds (VOCs) and particulate matter (PM) can have a significant effect on human health. As such, it is important to determine the potential exposure of individuals to these atmospheric constituents and investigate the processes that lead to the degradation of air quality within the urban environment. Air quality within urban areas is highly heterogeneous in both time and space and thus characterising air pollution effectively in such environments may be complex. Whilst modelled pollutant levels on the local scale often suggest high degrees of spatial and temporal variability, relatively sparse fixed site automated urban networks only provide low spatial resolution data that do not appear adequate in detecting such small scale variability. Previous studies have demonstrated that networks of low cost sensors which utilise a variety of measurment techniques, including electrochemical can be used to measure concentrations of atmospheric species including CO, NO and NO2 in addition to meteorological parameters (temperature and relative humidity) within urban areas [1]. Such low cost sensors as well as others used to measure pollutants such as PM are becoming increasingly readily available for inclusion in dense monitoring networks. Equipped with GPS and GPRS to determine position and transmit data respectively, these networks have the potential to provide valuable insights into pollutant variability inherent on the local or micro-scale and improve air pollution characterisation. This paper presents results obtained from two sensor network deployments that provide high spatial and temporal (ranging from 2 to 20 s) resolution observations transmitted in near real time. The first of these includes measurements of CO, NO, NO2, temperature and humidity obtained from a 46 sensor nodes located in and around Cambridge. The second, currently deployed (40 nodes) at London’s Heathrow Airport, provides additional observations of O3,
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
SO2, VOCs, CO2 as well as size-speciated particulate matter (0.38 to 17.4 µm), wind speed and direction. For the Cambridge deployment we show how the use of a network permits discrimination between near-field and far field emissions, and compare network results with model output simulated using the atmospheric dispersion model ADMS-Urban. Early results from the LHR deployment reveal many features of the emission characteristics of a major airport, showing source attribution associated with different operational modes, landside and airside activities, and regional pollution episodes influenced by macro meteorology. Such results demonstrate the value of such networks in characterising air quality, emissions and validating air quality models on local scales.
References 1. M. I. Mead, O. A. M. Popoola, G. B. Stewart, P. Landshoff, M. Calleja, M. Hayes, J. J. Baldovi, M. W.
McLeod, T. F. Hodgson, J. Dicks, A. Lewis, J. Cohen, R. Baron, J. R. Saffell, R. L. Jones, “The use of electrochemical sensors for monitoring urban air quality in low-cost, high-density networks”, Atmospheric Environment 70 (2013) 186-203.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Oral Presentation
ENABLING HIGH RESOLUTION URBAN POLLUTION
MONITORING THROUGH MOBILE SENSOR NETWORKS
Adrian Arfire1, Alcherio Martinoli
1
1Distributed Intelligent Systems and Algorithms Laboratory, EPFL, Lausanne;
{name.surname}@epfl.ch
Abstract
With more than half of the world population currently living in urban settlements [1] and
environmental related causes ranking among top mortality risks in both low to middle income
countries and high income countries [2], there is a clear need for a better understanding of air
pollution inside cities.
Wireless sensor networks (WSNs) hold significant promise to deliver the quantities of data
necessary for both calibration and validation of physics-based models, and the possibility to
refine the resolution of statistical models.
Figure 1. OpenSense sensor nodes on top of t-l bus in Lausanne (left) and VBZ streetcar in Zürich (right)
Within the Nano-Tera OpenSense project1, mobile WSNs for monitoring different air quality
parameters were deployed in the cities of Lausanne and Zürich. The motivation for using
mobility stems mainly from economical reasoning. Mobility permits the coverage of a larger
area for a given number of nodes, which means a reduction in both equipment and running
costs. The backbone of the deployments consists of sensor nodes anchored to public transport
vehicles: 10 buses in Lausanne and 10 streetcars in Zürich (Fig. 1). OpenSense nodes measure
O3, CO, CO2, NO2, particulate matter, temperature and humidity.
Figure 2. Seasonal UFP pollution maps with a spatial resolution of 100m x 100m for Zürich, based on data
collected by mobile sensor nodes throughout a year
Beyond the acquisition of large amounts of air quality data, algorithms have been developed
and validated during OpenSense for achieving automatic sensor calibration, sensor fault
detection, and for providing measurement accuracy bounds [3]. Based on the OpenSense data
1 Nano-Tera OpenSense project webpage: http://www.nano-tera.ch/projects/401.php
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Oral Presentation
land-use regression models have been developed for creating high spatial resolution maps of
ultrafine particle pollution [4] (Fig. 2).
An important issue for obtaining accurate and spatially highly resolved air pollution data is
the tradeoff between high cost of accurate air pollution monitoring sensors and the number of
such devices required for monitoring a given geographical area. Figure 3 depicts this tradeoff
and classifies the various techniques for gathering data. OpenSense22, the current follow up to
the original project, envisages obtaining and using data gathered via all outlined methods.
Figure 3. Sensing tradeoff for a given budget.
OpenSense2 joins together 8 Swiss laboratories with complementary expertise to achieve high
resolution air pollution maps by a crowdsourcing approach. In addition to the authors whose
expertise lies mainly in distributed intelligent systems, the other partners are experts in air
pollution monitoring and air quality modeling (Lukas Emmenegger – Laboratory for Air
Pollution/Environmental Technology, EMPA, Duebendorf), sensor data management (Karl
Aberer – Distributed Information Systems Laboratory, EFFL, Lausanne), embedded sensor
networks for environmental monitoring (Lothar Thiele – Computer Engineering and
Networks Laboratory, ETHZ, Zurich), adaptive information acquiring systems (Andreas
Krause – Learning and Adaptive Systems Group, ETHZ, Zurich), qualitative and model-based
reasoning for incentive-based crowdsourcing (Boi Faltings – Artificial Intelligence
Laboratory, EPFL, Lausanne), and public health studies (Michael Riediker – University
Institute for Work and Health, UNIL/UNIGE, Lausanne, and Murielle Bochud – University
Institute of Social and Preventive Medicine, CHUV, Lausanne).
This consortium plans to leverage the experiences of the original OpenSense project and to
extend it in order to achieve air pollution maps for the cities of Zürich and Lausanne at
resolutions in the order of 5 to 10 meters and to explore the human health consequences of the
long-term exposure to the targeted air pollutants.
References 1. United Nations, “World Urbanization Prospects: The 2007 Revision”, New York, NY, 2008.
2. C. D. Mathers, G. Stevens, M. Mascarenhas, “Global Health Risks: Mortality and Burden of Disease
Attributable to Selected Major Risks”, World Health Organization: Geneva, Switzerland, 2009.
3. D. Hasenfratz, O. Saukh, L. Thiele, “Model-Driven Accuracy Bounds for Noisy Sensor Readings”, 9th
IEEE International Conference on Distributed Computing in Sensor Systems (2013), 165-174.
4. D. Hasenfratz, O. Saukh, C. Walser, C. Hueglin, M. Fierz, L. Thiele, “Pushing the Spatio-Temporal
Resolution Limit of Urban Air Pollution Maps”, 12th International Conference on Pervasive Computing
and Communications (2014), to be published.
2 Nano-Tera OpenSense2 project webpage: http://www.nano-tera.ch/projects/423.php
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
PARTICIPATORY AIR QUALITY SENSING
J. Peters1, J. Theunis1, B. Elen1 1 VITO - Flemish Institute for Technological Research, 2400 Mol, Belgium;
Abstract Particulate air pollution is a mixture of particles that vary in number, size, shape, surface area, chemical composition, solubility and origin. Particulate matter in the urban air is introduced by primary emissions from combustion sources in transportation, industries and power generation, and by secondary formation through atmospheric photochemical reactions and conversion processes. The dynamics in space and time of particulate air pollution induce important pollutant specific differences between urban micro-environments. The exposure of citizens to air pollution in urban environments is strongly linked to the spatio-temporal variability of the pollutant concentrations and micro-spatial hotspot variation across suburbs. The spatial characterization of air pollution is therefore a valuable information for urban planners and policy makers, but also for residents in planning their activities. The core of this talk will highlight methodologies and recent developments for spatial air quality monitoring in urban environments, especially focusing on black carbon. We will use the following framework (Fig. 1) to describe spatial air quality monitoring projects. The starting point is the definition of the research questions by science, community or policy (or a combination of these). An experimental set-up is designed to gain information and to address the research questions. At the interplay between sensors, participation and monitoring methods choices have to be made to obtain an optimal set-up. What data collection methods are most suitable to obtain representative information?; which sensors are most suitable given the data quality requirements?; are communities involved and willing to participate in the data collection?
Figure 1. Conceptual framework to characterize participatory urban air quality monitoring studies.
Three different monitoring projects are discussed in this presentation: (1) a targeted and highly coordinated mobile monitoring campaign to map black carbon concentrations in urban
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
and a calibration model to assess black carbon concentrations in four uropean cities.
monitoring campaign up to the interactive isualization of the final result will be shown.
a collection by itizens over the data processing to the visualization of the monitoring results.
environments, (2) a mobile monitoring campaign to map black carbon from participatory monitoring with city guards, and (3) a participatory sensing campaign by citizens using low-cost gas sensorsE Results from the first two projects indicate that mobile monitoring is effective in mapping the micro-spatial variation in pollutant concentrations in urban environments. However, monitoring and data processing methods are needed for quality assurance of the final maps. Repeated measurements, for example, are shown to be essential for mapping purposes. An overview from the practical set-up of a v The final project is a community-based sensing project to collect environmental data and to use information extraction algorithms to share information to the users and the broader community. In this project, a sensor box has been developed using low-cost gas sensors as part of an integrated sensing platform. The sensor boxes were subject to a calibration procedure to estimate the black carbon concentration from gas concentrations (CO, NOx, O3 and VOC), and results showed a good performance in urban conditions in a stationary set-up. The mobile use of the sensor box is more challenging. Results from case studies in four European cities are presented, ranging from the recruitment strategies and datc
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Invited Talk
CHEMICAL SENSORS FOR THE DETECTION AND
QUANTIFICATION OF INDOOR AIR POLLUTANTS
T.-H. Nguyen1,2
, L. Mugherli1, C. Rivron
1, T.-H. Tran-Thi
1,2, E. Chevallier
2, C. Belon
2,
K. Raulin2, Y. Bigay
2
1 CNRS, DSM/IRAMIS/NIMBE/ Francis Perrin Laboratory, URA CEA-CNRS 2453,
91191 Gif-sur-Yvette Cedex, France; [email protected] 2
ETHERA R&D, CEA-Saclay, Bldg. 451, F-91191 Gif-sur-Yvette Cedex, France;
Abstract
During the last decade, the increase of the awareness of the importance of indoor air
quality and its potential impact on human health has stimulated interests in many volatile
organic compounds (VOC) present in homes and in public area. Due to the large number and
variety of toxic pollutants and the lack of a universal detection system, numerous methods
and techniques have been proposed. However, most of the available techniques have several
drawbacks in terms of the required high sensitivity and/or selectivity, and/or fast sampling
time. Moreover, when these requirements are met, the resulting price is often prohibitive.
Therefore, the development of a versatile sensor which can be easily adapted to the detection
of a wide range of pollutants is an important and significant challenge.
In the present work, we will describe the strategies aimed at elaborating a versatile
system able to trap and detect selectively a broad range of pollutants at low concentrations.
These strategies are based on the use of nanoporous matrices acting as sponges and doped
with various specific probe-molecules able to react selectively with the targeted pollutants.
These strategies are implemented with a miniaturized detection system allowing the rapid
detection of the pollutants either via absorption and/or fluorescence measurements.
Two examples of applications will be discussed. The first one concerns the selective
detection of formaldehyde (CH2O, 5ppb-1ppm, 15 min), a ubiquitous and carcinogenic air
contaminant responsible for significant indoor pollution because of its numerous emission
sources (plywood, isolation foam, adhesive resins, cosmetic, cigarette smoke, etc.). CH2O
concentration can vary from a few ppb to more than 100 ppb in homes [1]. As most of
humans spent 80 to 85 % of their time indoor, the Agency for Toxic Substance and Disease
Registry (ATSDR) recommends, for a chronic exposure during a whole life, a formaldehyde
concentration as low as 10 µg/m3 or 8 ppb.
The second application concerns the detection of nitrogen trichloride (NCl3, 5-200 ppb,
20 min), a toxic pollutant present at ppb levels in the atmosphere of indoor swimming pools.
NCl3 is generated from the reaction of Cl2, used as disinfectant to minimize the risk to users
from microbial contaminants, with nitrogen compounds generated by human activities (saliva,
sweat, urine, squams, …). At ppb levels, NCl3 can provoke significant eye and respiratory
irritations in swimmers and pool-attendants [2] and epidemiologic studies have recently
shown that it could induce asthma, especially in children [3].
Both sensors are nanoporous and transparent materials, produced via the sol-gel
process and doped with specific probe-molecules able to react with the targeted analytes
(Fig.1). When these materials are exposed to the pollutants, the reaction induces a colour
change whose intensity is proportional to the analyte concentration.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Invited Talk
Figure 1. Schematic representation of the synthesis of nanoporous materials via the sol-gel process with silicon
precursors. With Fluoral-P (enaminone) and NaI+Amylose as probes molecules, colorimetric sensors are
produced for the detection of CH2O and NCl3, respectively.
We will show the technology transfer to a CEA-CNRS spin-off, ETHERA, and the campaigns
of measurements on site the for sensors validation preceding their commercialisation.
Figure 2. ETHERA sensors. left: Profil’Air reader unit and badge for the detection of CH2O. right: Trichlor’Air
exposure and reader units for the detection of nitrogen trichloride. In both cases, the nanoporous sensor placed
in a badge is inserted in the exposure unit and exposed to a flow of the atmosphere to be analysed during 15-20
min. The colour change is read with the reader unit and transformed into the pollutant concentration.
References
[1] Kirchner S, Arenesi J-F, Cochet C, Derbez M, Duboudin C, Elias P, Gregoire A, Jédor B, Lucas J-P,
Pasquier N, Pigneret M, Ramalho O, Campagne nationale Logements. Etat de la qualité de l’air dans les
logements français – Observatoire de la Qualité de l’Air Intérieur-Rapport final DDD/SB – 2006-57.
[2] M. Héry, G. Hecht, J. M. Gerber, J. C. Gendre, G. Hubert, J. Rebuffaud, Exposure to chloramines in the
atmosphere of indoor swimming pools, Annals of Occupational Hygiene, 39 (1995) 427-439.
[3] A. Bernard, S. Carbonnelle, X. Dumont, M. Nickmilder, Infant swimming practice, Pulmonary
epithelium intregrity and the risk of allergic and respiratory diseases in childhood, Pediatrics 119 (2007) 1095-1103.
Profil’Air reader unit
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Oral Presentation
SELECTIVE DETECTION OF INDOOR VOCS USING A VIRTUAL
GAS SENSOR ARRAY
M. Leidinger1, T. Sauerwald
1, A. Schütze
1
1Lab for Measurement Technology, Saarland University, Campus A5 1, Saarbrücken,
Germany; [email protected]
Abstract
In order to assess indoor air quality quickly and cost-effectively, an approach using metal
oxide semiconductor (MOS) gas sensors was followed. A possible application for this is room
ventilation optimized for health and energy efficiency. A challenge of this scenario is the very
low concentration of target gases (down to low ppb levels [1]) against a background of much
higher concentration. This requires both high sensitivity as well as high selectivity to the
target gases. The focus in this work was on benzene, formaldehyde and naphthalene, as an
interferent background gas ethanol was used.
It was shown that the MOS sensors can detect and discriminate low levels of hazardous VOCs
using temperature cycled operation (TCO) of the sensors [2]. With this operating mode of the
gas sensors, the temperature of the gas sensitive layer is set to several levels in order to use
different gas sensing characteristics at the different temperatures as well as temperature
transitions.
The TCO of three different sensor types (Type 1000, 2000 and 5000; UST, Germany) were
optimized to achieve maximum sensing performance at a short temperature cycle length. The
obtained cycles run for 180 s, which is sufficiently short for indoor ventilation control.
The sensors were characterized and tested in the lab using two concentrations (guideline
concentration and tenfold guideline concentration) of each target gas and three background
ethanol concentrations as well as two different relative humidities.
For signal analysis, Linear Discriminant Analysis (LDA) was used. With this pattern
recognition and group classification method, the different gases could be detected and
identified by analyzing the sensor signals. Features were extracted from several segments of
each cycle (Figure 1) and an LDA algorithm was applied to the generated datasets.
One LDA result where the complete dataset of a measurement (all gas concentrations for
target gases, interferent and humidity) was analyzed is shown in Figure 2. The different gases
are all identified into separate groups, with little overlap. Even the small target gas
concentrations can be separated from the background. The results can be improved
significantly if the ethanol concentration or the humidity is known and an optimized LDA
calculation is performed for this scenario.
Furthermore, the sensors were implemented into stand-alone sensor systems, designed for
field tests of the sensors and the data processing. These systems were characterized in the lab
as well with the same measurement parameters. One result, corresponding to the one shown in
Figure 1, is illustrated in Figure 3.
The discrimination of the different gases is reduced dramatically compared to the
measurements of the sensors alone. The small concentrations of every target gas can hardly be
discriminated from the background, for the high concentration the separation is still working
for formaldehyde and naphthalene.
As the reason for this, gas emissions of the systems themselves (plastic housing and PCB)
were identified and quantified using GC/MS analysis.
This problem of gas emissions of the system materials must be addressed in future gas IAQ
gas sensor system designs.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Oral Presentation
Figure 1: Plot of the signal patterns of every temperature cycle of the MOS gas sensor during a
measurement. The different segments for LDA feature extreaction are indicated
Figure 2: LDA result of a single sensor in a sensor lab test with the three ethanol backgrounds combined
classified as one group
Figure 3: Same measurement as Figure 1 but with a field test sensor system
References 1. WHO Guidelines for Indoor Air Quality: Selected Pollutants. Geneva: World Health Organization; 2010.
2. M. Schüler, N. Helwig, G. Ventura, A. Schütze and T. Sauerwald, Detecting Trace-Level Concentrations
of Volatile Organic Compounds with Metal Oxide Gas Sensors, Lecture 7488, IEEE Sensors Conference
2013; Baltimore, MD, USA, Nov. 03 - 06, 2013
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Oral Presentation
INDOOR ENVIRONMENT AND HEALTH IN ELDERLY CARE
CENTERS: THE GERIA PROJECT A. MENDES
1, L. AGUIAR
1, C. PEREIRA
1, P. NEVES
1, S. SILVA
1, D. MENDES
1, R.
MORONI2, S. BONASSI
2, Teresa PALMEIRO
3, Iolanda CAIRES
3, Amália BOTELHO
3,
Pedro MARTINS3, Nuno NEUPARTH
3, J. P. TEIXEIRA
1,4
1Environmental Health Department, Portuguese National Health Institute Doutor Ricardo
Jorge, Rua Alexandre Herculano, 321, 4000-055 Porto, Portugal 2 IRCCS San Raffaele S.p.A, Via di Val Cannuta, 247, 00166 Rome, Italy
3CEDOC, Departamento de Fisiopatologia, Faculdade de Ciências Médicas, FCM,
Universidade Nova de Lisboa, 1169-056 Lisboa, Portugal 4Institute of Public Health (ISPUP), Porto University, Rua das Taipas, 135, 4050-600 Porto,
Portugal
Abstract
Introduction According to the United Nations estimates, the total number of people aged 65 years and
older was 506 million in 2008 and is anticipated to double to 1.3 billion by 2040, accounting
for the 14 percent of total global population. This trend explains the increasing demand of
long-term care services [1] such as elderly care centers (ECC). Indoor air pollutants may have
special significance for elderly, even at low concentrations due to long exposure periods.
Consistent evidences from both epidemiological and experimental studies have demonstrated
that short- and long-term exposure to particulate matter (PM), in particular to the finest
particles (i.e. airborne PM with aerodynamic diameter less than 2.5μm, PM2.5), is associated
with cardiovascular morbidity and mortality [2]. Other studies associated indoor air pollution
with cardiovascular effects [3], however, little is known about the effects of improving indoor
air quality on cardiovascular health. Also, aging is associated with a decline in immune
defenses and respiratory function, and predisposition to respiratory infections [4]. This paper
presents results which have been produced within the GERIA ongoing project ‘Geriatric study
in Portugal on Health Effects of Air Quality in Elderly Care Centers’, by measuring and
characterizing indoor air quality (IAQ) and thermal comfort (TC) in 22 ECC in Porto,
Portugal. The aim of the study was to evaluate 1) the IAQ and TC in a representative sample
of ECC in Porto as compared with international standards, 2) to study the variability among
different spaces within single ECC, 3) how buildings characteristics may affect the extent of
indoor air pollution or thermal regulation, and 4) explore the impact of IAQ variables on
elderly respiratory health.
Methodologies
Within the 1st phase of GERIA project, and based on the Portuguese Social Chart, 53 ECC -
33 from Lisbon and 20 from Porto - were randomly selected. From September 2012 to April
2013, the BOLD (Burden of Obstructive Lung Disease) [5] questionnaire was applied by an
interviewer to the elderly who gave their informed consent and were able to participate. All
the participants should had ≥ 65 years old and live in the ECC for more than two weeks. The
results in this paper correspond to the pilot study of a population of 143 elderly interviewed
randomly from 22 ECC in the city of Porto. Also, indoor environmental parameters were
measured twice, during winter and summer, in 141 ECC rooms within dining rooms, drawing
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Oral Presentation
rooms, medical offices and bedrooms. These areas were assessed for IAQ chemical (CO2, CO,
Formaldehyde, TVOC, PM10, PM2.5) and biological contaminants (total bacteria and fungi).
TC parameters were measured following ISO 7730:2005 (PMV and PPD indexes). A walk-
through building questionnaire was performed prior the monitoring and outdoor samples were
also collected for comparison. Classical statistical methods were used to estimate means,
medians and frequencies (percentages) in order to obtain insight into the ECC characteristics
and environmental monitoring results within and between buildings. The variables were tested
for normality with Shapiro-Wilk test. Mann-Whitney (U) test and Kruskal-Wallis (H) for
independent samples were conducted for seasonal effects assessment, indoor/outdoor and
within buildings location differences. A 0.05 level of significance was used for all analyses.
All data were analyzed using IBM SPSS 21.0.
Results and Preliminary Conclusions
The overall PM2.5 mean concentration of the 22 ECC was above national (25 µg/m3) and
international reference levels (35 µg/m3) in both seasons. These findings showed as these
parameters are critical for air quality and could influence on human health. Other recent study
[6] also found, high levels of PM2.5 in similar indoor environments, and the link with lung
function and respiratory diseases such as COPD [7] has been quite demonstrated. Although all
the other indoor air pollutants were within the reference levels peak values of PM10, TVOC,
CO2, bacteria and fungi exceeded the reference levels, compromising indoor air comfort and
worsening the already existent respiratory chronic diseases. TVOC, Bacteria, CO and CO2
showed significantly higher indoor levels compared to outdoor, in both seasons. Indoor PM10,
TVOC, Bacteria and CO2 present significant differences between seasons (p < 0.01). TVOC,
bacteria and CO2 show significant variation between ECC rooms (p < 0.01) and 4% of fungi
samples were positive for pathogenic Aspergillus species. The winter PMV index is between
the ‘slightly cool’ (-1) and ‘cool’ (-2) points in the thermal sensation scale, which may
potentiate respiratory tract infections. PPD and PMV indexes show significant differences by
room and by season (p < 0.01). The building variables ‘Insulation’, ‘Heating Ventilation’ and
‘Windows frames’ were significantly associated to chemical, biological and TC parameters.
‘Bacteria’, ‘Fungi’, ‘Temperature’, Relative Humidity’, and ‘PPD index’ are the mostly
affected by building characteristics. In elderly respondents, breathlessness (27.5%) and cough
(23.1%) were the major respiratory symptoms, and allergic rhinitis (21.7%) the main self-
reported illness. Heart troubles were reported by 36.6% residents. Symptoms of wheezing
(10.5%) in the last 12 months and asthma diagnosis (8.4%) were more common in females, as
opposed to symptoms breathlessness (4.9%) and sputum (3.5%), more frequent in males.
Smoking habits, both past and present, were more frequent in men (11.9%).
Our study suggested that attention is needed to PM2.5 particle fraction, as well as, peak
concentrations and fungi species that might compromised IAQ comfort. To prevent low
indoor temperatures and discomfort, especially on winter season, simple measures could
provide health benefits to ECC residents and workers, such as insulating ceilings, walls, and
windows, maintaining natural and passive ventilation, solutions that are common in Portugal
due to the advantage of the country’s generally mild weather. Investigations are still needed to
better understand the links between indoor air pollution and respiratory health impairment in
elderly. In this sense, logistic regression analysis is ongoing, thus focusing on the impact of
IAQ and respiratory health symptoms on ECCs residents.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Oral Presentation
Acknowledgement
Our current research is supported by GERIA Project (www.geria.webnode.com):
PTDC/SAU-SAP/116563/2010 and a PhD Grant (SFRH/BD/72399/2010) from Foundation
for Science and Technology (Fundação para a Ciência e Tecnologia - FCT).
References
1. Damiani, G., et al., An ecological study on the relationship between supply of beds in long-term care
institutions in Italy and potential care needs for the elderly. BMC Health Serv Res, 2009. 9: p. 174.
2. Martinelli, N., O. Olivieri, and D. Girelli, Air particulate matter and cardiovascular disease: a
narrative review. Eur J Intern Med, 2013. 24(4): p. 295-302.
3. Lin, L.Y., et al., Reducing indoor air pollution by air conditioning is associated with improvements in
cardiovascular health among the general population. Sci Total Environ, 2013. 463-464: p. 176-81.
4. Bentayeb, M., et al., Higher prevalence of breathlessness in elderly exposed to indoor aldehydes and
VOCs in a representative sample of French dwellings. Respir Med, 2013. 107(10): p. 1598-607.
5. Buist, A.S., et al., The Burden of Obstructive Lung Disease Initiative (BOLD): Rationale and Design.
COPD: Journal of Chronic Obstructive Pulmonary Disease, 2005. 2(2): p. 277-283.
6. Bentayeb, M., et al., Indoor air pollution and respiratory health in the elderly. J Environ Sci Health A Tox Hazard Subst Environ Eng, 2013. 48(14): p. 1783-9.
7. Osman, L.M., et al., Indoor air quality in homes of patients with chronic obstructive pulmonary disease.
Am. J. Respir. Crit. Care Med., 2007. 176: p. 465–472.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
INDOOR AIR QUALITY ASSESSMENT: TOWARDS A BETTER PROTECTION OF PEOPLE
C. Borrego1,2, J. Ginja1, T. Paiva1, A. Silva1, M. Coutinho1, A. M. Costa1 1IDAD - Institute of Environment and Development, Aveiro, Portugal; [email protected]
2 CESAM and Department of Environment and Planning, University of Aveiro, 3810-193, Aveiro, Portugal
The effects of air pollution on health result from a chain of events, ranging from the emission of pollutants, through transport, dispersion, transformation, until the contact and absorption by humans. For exposure assessment, in addition to include the outdoor air quality, it is essential to consider indoor spaces, where people living in urban areas spend approximately 80-90% of their time, rising to 95% for more vulnerable groups, such as children and the elderly [1, 2]. Additionally, the changes in the strategies of buildings construction, particularly with the introduction of new materials and greater isolation, have led to a decrease in air exchange rates with potential effects in the concentration of pollutants. Indoor air quality problems are consequence of the combination of multiple factors, including indoor air pollution sources, problematic levels of ambient air quality and inadequate ventilation related with energy saving strategies or occupants behaviour. In order to overcome the lack of information regarding indoor air quality in Portuguese homes the Portuguese Society of Allergology and Clinical Immunology (SPAIC) promoted a study to characterise a significant number of homes at 5 regions of mainland Portugal. From December 2007 until July 2008 samples of indoor air were collected from the master bedroom and kitchen of 557 homes distributed throughout mainland Portugal [3, 4]. The measurements were performed by IDAD in cooperation with SPAIC. Measurements of different parameters were performed, namely carbon dioxide (CO2), carbon monoxide (CO), particulate matter with dimension less than 10μm (PM10), formaldehyde (HCHO), volatile organic compounds (VOC), ozone (O3), sulphur dioxide (SO2) and nitrogen dioxide (NO2). Temperature and relative humidity were also measured to evaluate thermal comfort. Information for characterization of each home and residents health was also collected, including smoking habits and general conditions of the house. This work demonstrates that around 60% of the houses visited had at least one measured value above the reference values. The parameters responsible for the majority of the exceedances were VOC, CO2 and PM10 (see Table 1).
Table 1 - Indoor air quality results from 557 homes distributed through mainland Portugal.
Parameter Unit Measurements
(nº) Mean Median Minimum Maximum
10th percentile
90th percentile
Temp. °C 1091 21,6 21,6 11,5 29,8 17,8 25,5 HR (%) 1110 55,1 55,8 21,0 95,5 42,6 66,0 CO2 mg.m-3 1110 1159 1050 633 4795 763 1658 CO mg.m-3 1110 1,2 1,1 <1,1 23,3 1,1 1,1 O3 mg.m-3 1110 0,04 0,03 <0,03 0,18 0,03 0,05
PM10 µg.m-3 1111 42,2 29,2 1 934 11,9 77,8 VOC mg.m-3 1085 0,77 0,60 0,03 4,28 0,26 1,44
HCHO mg.m-3 1111 0,01 0,01 <0,01 0,25 0,01 0,02 SO2 mg.m-3 1110 < 0,5 < 0,5 < 0,5 < 0,5 < 0,5 < 0,5 NO2 mg.m-3 1110 0,2 0,2 <0,2 2,5 0,2 0,2
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk The results were compared with indicative reference values specified for indoor air quality, ambient air quality legislation, as well as other references [5, 6, 7]. For the VOC measurements about 50% of the results were higher than 0,6 mg.m-3, a protection threshold established in Portuguese indoor air quality legislation [5]. Moreover, 94% of the VOC measurements were above 0,2 mg.m-3 considered by some authors as a level of comfort were it is not expected to have odours, irritation or discomfort [7]. For carbon dioxide it was found that only 7,6% of the measurements exceeded the reference level of 1800 mg.m-3. Regarding PM10, Portuguese legislation establishes limit values of 50 μg.m-3 for indoor air, as well as outdoor air [5, 6], and 40 μg.m-3 for ambient air on annual basis [6]. Considering as reference the limits indicated above, it was observed exceedances in 23% of the measurements (50 μg.m-3) and 33% comparing with the annual limit value (40 μg.m-3). By studying the relationship between the concentrations of CO2, PM10 and VOC it was also confirmed that CO2 levels should be considered with precaution as an indicator of indoor air quality. In fact, it was concluded that an intervention in indoor air quality based on the concentration of CO2 disregard possible exceedance for PM10 and VOC. About 90% of the exceedances were recorded with CO2 levels below 1800 mg.m-3, which is a level usually used to indicate insufficient air renewal. In addition, with this work it was possible to confirm the importance of some sources with relevant contribution to indoor air quality such as tobacco smoke or fireplaces, as well as the contribution of individual strategies of ventilation. The conclusions of the work also point to the need for raising awareness about the impact of individual behaviour on indoor air quality. The use new sensing technologies for indoor air quality assessment could be seen as a valuable contribution to modify these behaviours. This study was the first of its kind in Portugal and it can serve as a reference for developing knowledge for indoor air quality and its relation with multiple pathologies. The concentration of some pollutants in a significant number of measurements demonstrates the importance of indoor air quality exposure and its potential impact on comfort and health. The data allows the identification of opportunities for intervention and improvement of indoor air, especially in housing conditions, control of emission sources of pollutants or adoption of new ventilation strategies in dwellings.
References 1. Borrego C., Neuparth N., Carvalho A.C., Carvalho A., Miranda A.I., Costa A.M., Monteiro A., Martins
H., Correia I., Ferreira J., Amorim J.H., Martins J., Pinto J.R., Santos J., Silva J.V., Valente J., Simões L., Lopes M., Tchepel O., Cascão P., Lopes da Mata P., Martins P., Santos P., Tavares R., Nunes T., Martins V., “A Saúde e o Ar que Respiramos - Um Caso de Estudo em Portugal”. Textos de Educação. Lisboa. Fundação Calouste Gulbenkian. 125 pp, (2008).
2. IOM - Institute of Medicine, “Climate Change, The indoor environment and health”, Washington DC, The National Academies Press, 286 pp, (2011).
3. Ginja J., Borrego C., Coutinho M., Nunes C., Almeida M.M., “Qualidade do ar interior nas habitações Portuguesas”, CINCOS’12 – Congress of Innovation on Sustainable Construction, Centro Habitat, Aveiro, (2012), pp. 695-707.
4. Morais-Almeida M., Lopes I., Nunes C., “Caracterização da qualidade do ar interior em Portugal – Estudo HabitAr”. Revista Portuguesa de Imunoalergologia, 18 (I):21-38, (2010).
5. Portaria n.º 353-A/2013, regulates indoor air quality for services buildings. 6. Decree-Law n.º 102/2010 on air quality assessment and management - regulates air quality management
and introduces in the legal order two EC Directives addressing air quality. 7. Hess-Kosa, K., Indoor Air Quality Sampling Methodologies, Lewis Publishers, 320 pp, (2002).
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
COST ACTION ES1002 “WIRE”: WEATHER INTELLIGENCE FOR RENEWABLE ENERGIES
Anna Maria Sempreviva1, Alain Heimo2 1 Institute of Atmospheric Sciences and Climate – National Council of Research of Italy
(ISAC-CNR), Lamezia Terme, Italy, [email protected] 2 METEOTEST| Fabrikstrasse 14, CH-3012 Bern, Switzerland, [email protected]
Abstract Due to climate change and shrinking fossil resources, the transition increasingly renewable energy shares is unavoidable. But, as wind and solar energy is strongly dependent on highly variable weather processes, increased penetration rates will also lead to strong fluctuations in the electricity grid, which needs to be balanced. Proper and specific forecasting of “energy weather” is a key component for serving the purpose. Therefore, it is timely to scientifically address the requirements to provide the best possible specific weather information for forecasting the energy production of wind and solar power plants for the next minutes up to several days ahead. Towards such aims, the COST action ES1002, Weather Intelligence for Renewable Energies, WIRE www.wire1002.ch has two main lines of activity: first, to follow the development of dedicated post-processing algorithms coupled with weather prediction models and measurement data especially remote sensing observations; and second, to investigate the difficult relationship between the highly intermittent weather dependent power production and the energy distribution towards end users. The second goal raises new challenges as it requires, from energy producers and distributors, definitions of the necessary forecast data and new technologies dedicated to the management of power plants and electricity grids. Twenty five European COST Countries and four non-COST countries, Australia, Canada, Japan, and USA, are participating to WIRE that is one of the largest Actions in the Earth System Science and Environmental Management domain. The action comprises three Working Groups (WG) with the following objectives: Combining numerical weather models with suitable post-processing methods as well as
real-time surface and remote sensing measurements.
Establishing a common understanding between the relevant communities (wind and solar, meteorologists, energy engineers, grid managers) in order to optimize the technical and economic integration of these renewable energies into electricity grids and markets.
Transferring knowledge across Europe, connecting the scientific and end user communities.
A Report on the current state of research and development related to measurement, modeling and forecasting technologies for renewable energy integration can be found at http://wire1002.ch/fileadmin/user_upload/Restricted/Current_State_Report/Current_State_Report_draft_final.pdf Working Group 1. Modeling and post-processing In the first phase of the project, a critical assessment of past and present research activities in different countries and of current knowledge gaps has been produced. The report highlight existing weaknesses for all components of the renewable energy forecast system. In particular, it allows evaluating the adequacy of numerical weather models coupled with dedicated power conversion modules to deliver accurate power production forecasts.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk Furthermore, the potential of downscaling models towards higher spatial resolution will be analyzed in order to evaluate its impact when combined with appropriate post-processing applications.
Working Group 2. Measurements and Observations
The activity in WG2 aims to quantify the added value of the new observation techniques in further developing power forecasting models. In particular, the focus will be on how including ground-based and space-borne (satellite) remote sensing technologies will improve the quality of the production forecasts including at the post-processing level. Recommendations will be provided to the scientific and users communities. Ground-based remote sensing systems include: weather radars, cloud radars, ceilometers, Total Sky Imagers, pyrgeometers, and combinations of these systems; Wind profilers and LIDARs for the wind speed and direction fields, or combinations of them; LIDAR and micro-wave systems for the determination of Liquid Water Content LWC (and possibly the Particle Size Distribution PSD) of the boundary layer - presently products of the model itself - which are required for improving the high resolution models. The results of these post-processing improved forecasting systems has been evaluated through a benchmark excersise. Existing wind farm and solar energy plant locations have been selected for the evaluation of the available methodologies. Database(s) containing the validation data have been set up and appropriately formatted for direct use by the modelers’ community. http://wire1002.ch/fileadmin/user_upload/Documents/ES1002_Benchmark_announcement_v6.pdf
Working Group 3. Power Plants and Electrical Grid Management
Finally, the development of improved forecasting systems has been done in cooperation with end users in order to guarantee a good match between the scientific developments and the user s’ requirements. A tentative implementation of the forecasts into the operational strategies of the power plants and electrical grid operators will be evaluated. At this point, it is required to establish a high level interdisciplinary collaboration between science and industry. Secondary specific applications such as the influence of “thermal rating” and icing for power lines at selected test sites will also be performed.
Main Events
“State-of-the-Art” Workshop 22nd-23th March 2011 Mines ParisTech, Sofia Antipolis, France
Remote Sensing Measurements for Renewable Energy. Workshop, 22nd-23rd May 2012. Technical University of Denmark DTU, Risoe Campus, Roskilde, Denmark. http://www.wire1002.ch/index.php?id=24
WIRE Status Workshop. October 9th -11th 2013, OMSZ, Budapest, HU
Next Events
“Weather Intelligence for Renewable Urban Areas”, Workshop, 2nd 3rd June 2014 Technical University of Denmark DTU, Risoe Campus, Roskilde, Denmark.
“Processing techniques for the detection of atmospheric constituents and the estimation and forecasting of solar irradiance from all-sky images”, Workshop, 24th-25th June 2014, Patras, Greece.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation The Urban Control Center: An ICT Platform for Smart Cities in Italy
Paolo Deidda
Rome Smart Solutions Lab, IBM Italia S.p.A., Via Sciangai 53, Rome; [email protected]
Abstract Today many private and public organizations require efficient operational supervision and coordination. They need to get, aggregate and correlate the right information so that the entitled people can make fast, accurate decisions and track the effect of those decisions. IBM® Urban Control Center is an ICT platform that supports the decision makers in accessing and analyzing the data they need and in coordinating the appropriate city operations. At the same time citizens are asking for more transparency in the administration’s decisions and so they need more awareness on how those decisions may affect their life and how they can achieve a better social behavior to improve the quality of life. The Urban Control Center goal is then to allow the Public Administration to share with citizens the planned goals and reached objectives. IBM Urban Control Center has been selected for the research project RES NOVAE (funded by Italian Ministry of Education, Universities and Research) as the ICT platform supporting the Public Authorities in the operations and strategic decisions on energy-environment domains. The platform has the following main features:
Automatically collect, aggregate, elaborate data from a great variety of internal sources. Data may be generated from sensors, higher level of devices or even from external ICT sources
Integrate and analyze that data using the geo-spatial-information in the provided data showing data and events as maps, graphs, tables, or pie charts based filtered on date and time, location, and other categories that might be defined.
Enable the P.A. to show data and elaborated indicators to citizens. Enable the citizen collaboration in the management of the public assets. Facilitate easy and timely access to information. Present related information in a coherent way navigating the data and events through
reports and maps based on integrated geographic information system (GIS) or location plan maps. The impact of events through interactive mapping and scenario analysis can be easily derived.
Provide a great extensibility with a rich set of integration points which enable the implementation of vertical domain solutions and, at the same time, the integration and correlation of all domain data.
Provide support to implement workflows of operations which could enable the automatic coordination of the action to be taken by P.A. in the management of emergencies or critical issues the platform may discover or highlight.
The following picture summarizes the main functional components implemented by the IBM Urban Control Center. It can be noted how the data is gathered from different sources using different protocols. City Governance is achieved through the analysis tools, advanced display capabilities and the event and KPI management functions which elaborate the great volume and variety of data made available.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
Thanks to the features mentioned above the platform helps the P.A. to get the following benefits:
Modify or correct its strategy or day-by-day activity to meet predefined target such as PAES 2020 indicator values, citizen well-being level, energy or CO2 saving, etc.
Optimize planned and unplanned operations by using a holistic reporting and monitoring approach.
Integrate the knowledge in the different domains in an organization by facilitating communication and collaboration.
Improve quality of service and reduce expense by coordinating events focusing on the integration and optimization of information within and across multiple domains in a central operations hub, in real time and over long periods.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
THE URBAN CONTROL CENTER DESIGN AS A DASHBOARD AND DECISION SUPPORT SYSTEM FOR ITALIAN SMART CITIES
Mariagrazia Dotoli1, Raffaele Carli1 1Department of Electrical and Information Engineering, Polytechnic of Bari, Bari;
Email: {mariagrazia.dotoli, raffaele.carli}@poliba.it
Abstract Due to increasing populations, aging infrastructures, and declining budgets, cities are encountering non-trivial long-term challenges across all their systems which are central to their operation and development. Urban performance does not only depend on the city's endowment of hard infrastructures and networks (physical capital) but it increasingly relies on the availability and quality of knowledge communication and social infrastructure (intellectual and social capital), where the latter form of capital is clearly decisive for urban progress and growth. Against this background, the concept of smart city has been recently introduced as a strategic means to encompass modern urban production factors in a common framework and highlight the growing importance of Information and Communication Technologies (ICT) and social and environmental capital in profiling cities competitiveness and sustainability [1]. In the emerging futuristic vision, cities are becoming smart not only in terms of automation of services to individual persons, buildings, traffic systems, etc., but also in terms of improved efficiency, equity, and quality of life for its citizens [2]. As a result, it emerges the need for performance assessment tools and decision support systems for the smart city [2]. These instruments are essential to capitalize the measure of the city dynamics and design performance improvement of the delivered services/products. Smart city indicator dashboards and decision aid tools help leaders, managers, and policy makers take intelligent decisions about the allocation of available resources, while supporting the communication of efforts in city performance improvement to citizens, visitors, and potential investors [3]. Figure 1 shows a scheme of the performance assessment and decision support in a smart city. In response to the need of intelligent decision making, planning, and programming of smart cities, the paper presents the model of an innovative decision support system for efficient urban governance capable of combining the economic logics of investment with the physical structure of the territory and the enhancement of human and social capitals. The proposed tool is as part of the so-called Urban Control Center (UCC), a sort of control room of the city where the Public Administration (PA) can analyze the city dynamics and citizens can be informed on the performance of urban infrastructure and services, with a particular focus on energy efficiency and environmental sustainability concerns. The UCC provides the city manager and the PA decision makers with a series of control and decision panels for each urban sector, whose operations affect the key urban performances (e.g., residential buildings, public buildings, industry, local transportation systems, etc.). Since the city is a complex system of systems, the proposed decision support system is based on a hierarchical model and makes use of the most modern tools of business intelligence, automation, and operational research. In particular, multi-objective decision making tools are used in order to search for optimal solutions, multi-attribute decision making tools are employed in order to provide a ranking and scoring of the determined alternatives, sensitivity analysis allows taking care of the problem uncertainty, and finally multi-participants decision making ensures the active participation of decision takers in the decision process. The proposed multi-level approach, shown in Fig. 2, allows overcoming obstacles deriving from the complexity of the context, such as conflicting objectives and requirements, fragmented decision-making, and difficult cross-optimization of sub-systems [4].
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation In order to highlight the advantages of the modular decision process architecture, the paper also presents the description of a specific decision-making sub-system at low level unit. In particular, the results of the optimal determination of retrofitting interventions on a given stock of public buildings is provided to demonstrate the approach successfulness in helping the smart city governance take optimal decisions towards the improvement of each urban sub-system (in this case the public buildings sub-system of the smart city). The paper results are obtained in the framework of project Res Novae - PON_04a2_E/8, supported by the “Smart Cities Communities and Social Innovation” program of the University and Research Italian Ministry and of the research activities carried out in Res Novae by the Decision and Control Laboratory group of the Department of Electrical and Information Engineering of the Polytechnic of Bari, Italy.
References 1. M. Batty, K.W. Axhausen, F. Giannotti, A. Pozdnoukhov, A. Bazzani, M. Wachowicz, G. Ouzounis, Y.
Portugali, “Smart cities of the future”, Eur. Phys. J., vol. 214, no. 1, pp. 481-518, 2012. 2. A. Caragliu, C. del Bo, P. Nijkamp, “Smart cities in Europe”, Proc. 3rd Centr. Europ. Conf. Regional
Science, Oct. 2009. 3. R. Carli, M. Dotoli, R. Pellegrino, L. Ranieri, “Measuring and managing the smartness of cities: A
framework for classifying performance indicators”, Proc. IEEE Conf. Systems, Man and Cybernetics (SMC 2013), pp.1288-1293, 13-16 Oct. 2013.
4. M.D. Mesarovic, D. Macko, Y. Takahara, Theory of Hierarchical, Mutilevel Systems, Academic Press, New York, 1970.
Figure 1. Performance assessment and decision support scheme in a smart city.
Figure 2. Decentralized multi-level decision support system for smart city governance.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
DEVELOPMENT OF A PORTABLE SENSOR SYSTEM FOR AIR QUALITY MONITORING
Domenico Suriano1, Michele Penza1, Gennaro Cassano1, Mariagabriella Villani2,
Giorgio Assennato3, Alessandra Nocioni3.
1ENEA - Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Technical Unit for Materials Technologies-Brindisi Research Center, PO Box 51 Br-4, I-72100 Brindisi, Italy. Email: [email protected]; [email protected]. 2ENEA - Italian National Agency for New Technologies, Energy and Sustainable Economic
Development, Technical Unit for Energy Efficiency-Ispra Research Center, Ispra, Italy. 3ARPA-Puglia, Italian National Agency for Environmental Protection, Bari, Italy.
Abstract Environmental monitoring is strongly required to protect the public health and save the environment from toxic contaminants and pathogens that can be released into air. Air-pollutants include carbon monoxide (CO), nitrogen dioxide (NO2), sulfur dioxide (SO2), that originate from various sources such as vehicle emissions, power plants, refineries, industrial and laboratory processes. However, current monitoring methods are costly and time-consuming, also limitations in sampling and analytical techniques exist. Clearly, a need exists for accurate, inexpensive long-term monitoring of environmental contaminants using low-cost solid-state gas sensors that are able to operate on-site and real-time. Calibrated cost-effective gas sensors are a very interesting solution for networked systems suitable to monitor air-pollutants in urban street and real scenario of smart cities with high spatial and time resolution. In ENEA, at Brindisi Research Center, a handheld gas sensor system, called NASUS IV, based on solid state gas sensors was designed and implemented [1-3]. This system is the last result of our researches in the area of tiny and portable system building for air quality control based on cost-effective solid state gas-sensors. The main goal of the system designed and built in our laboratory is the development of a handheld device in order to detect some air-pollutant gases such as CO, SO2, NO2 and H2S in the urban areas at outdoor level, including indoor applications for chemical safety and green buildings. NASUS IV is formed by four modules, or four PCBs: (i) main module, (ii) sensor module, (iii) wireless module and (iv) power module. The first three modules (PCBs) are packed in the same handheld case, but the power module is arranged in a separate case as shown in Figure 1.
(a) (b)
Figure 1. (a) NASUS IV inside and power supply unit. (b) Mobile phone connected to NASUS IV.
The main module is in charge of managing the communications with the wireless module and with the PC via USB port, as well as, driving the local display, driving the mini-joystick (which is one of the input system, but not the only) and driving the SD-card memory. On the
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
sensor module are arranged six sensors: a temperature sensor, a humidity sensor and four electrochemical solid-state gas sensors. The wireless module allows to control the remote device by means of commands inside a SMS sent from a mobile phone (see Figure 1b), which will get the SMS answer returning from NASUS IV. Furthermore, it can send e-mails containing any sensor data requested by the remote end-user mobile phone. The power module provides to charge a battery inside NASUS IV. Moreover, it performs a smart management of the available power sources (network electricity or solar energy), by giving priority to the solar one, whether possible. Currently, the sensors onboard NASUS IV are the electrochemical type sensors for the detection of CO, SO2, NO2 and H2S provided by Alphasense Ltd (UK). We decided to test these electrochemical-type gas sensors inside our device because of their interesting features such as, for an example, low-cost, very low power consumption, small dimensions, good sensitivity and improved response to the interfering gases in real-world situations. We performed several tests in our laboratory by directly injecting the gas inside the case (volume ca. 50 cm3) of the NASUS IV in order to verify the system capabilities, before in-field testing and sensing measurements in real scenario. Some laboratory results [4] of the sensor-system for a ppb level of NO2 (20 - 300 ppb range) detection have been measured successfully. These are very promising for real-world applications. Typical real-world measurements performed in air quality monitoring stations are shown for CO (Figure 2) and NO2 (Figure 3) real-time monitoring.
Figure 2 COCX sensor response to CO air-pollutant in NASUS IV system versus CO gas referenced
analyzer by ARPA-Puglia.
Figure 3 NO2A1 sensor response to NO2 air-pollutant in NASUS IV system versus NO2 gas referenced analyzer. Correction to NO2 sensor response with O3 referenced
contribution has been estimated. Currently, we are performing long-term experimental campaigns by NASUS sensor-system (Figure 5) in the real environment by the collaboration with ARPA-Puglia, the Italian public environmental agency, which is providing the availability of urban/industrial fixed air-quality stations, under science and technology agreement between ENEA and ARPA-Puglia, in order to compare the sensing performance of our portable sensor-system with the referenced gas analyzers (Figure 4 and Figure 6), as regulated by Air Quality Directive 2008/50/EC (Ambient air quality and cleaner air for Europe). In conclusion, these preliminary results of the experimental campaign are very promising to develop a real deployment of an accurate low-cost sensors network for urban air quality monitoring. This new cost-effective sensor technology should enhance the management of the environmental emergencies in the urban areas and critical hot-spots for intelligent cities. Finally, the personal exposure of the citizens and citizen communities towards air-pollution
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
could be measured by these innovative operated-automatically AQ sensor-systems with performing functionalities of data local storage, portability and wireless communications, including smartphone operations. However, further and deep investigations in real scenario at urban scale are planned by long-term experimental campaigns to corroborate this proposed sensing solution for challenging applications in smart cities.
Figure 4. Air Quality Monitoring Station of ARPA-Puglia,
Environmental Protection Regional Agency (Bari, Italy).
Figure 5. NASUS sensor system integrated in box (IP65/66) for Air Quality
Monitoring in sensor networks at outdoor level.
Figure 6. Air Quality Monitoring Mobile Laboratory.
Acknowledgements The authors ENEA are indebted to JRC-Ispra, Institute for Environment and Sustainability, for fruitful cooperation in air quality sensors performance assessment. The authors ENEA thank ARPA-Puglia for fruitful collaboration to experiment the air-quality control sensor systems in air-monitoring stations network. References
1. W. Tsujita, A. Yoshino, H. Ishida, T. Morizumi, Sensors and Actuators B 110 (2005) 304-311. 2. M. Penza, D. Suriano, R. Rossi, M. Alvisi, G. Cassano, V. Pfister, L. Trizio, M Brattoli, M. Amodio, G.
De Gennaro, Lecture Notes in Electrical Engineering 109 LNEE (2012) 87-92. 3. M. Penza, D. Suriano, G. Cassano, V. Pfister, M. Alvisi, R. Rossi, Paolo Rosario Dambruoso, Livia
Trizio, Gianluigi De Gennaro, Proceedings IMCS 2012, 20-23 May 2012, Nuremberg, Germany. 4. D. Suriano, G. Cassano, M. Penza, EuNetAir Proceedings at European Environment Agency (EEA)
Meeting, 3-4 October 2013.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
AIR QUALITY IN SPANISH CITIES. FIRST STEPS IN SMART SENSORS VALIDATION
M.C. Minguillón1, M. Cusack1, C. Reche1, I. Rivas1, M. Viana1, X. Querol1 1Institute of Environmental Assessment and Water Research (IDAEA), CSIC, Jordi Girona
18-26, 08034 Barcelona; [email protected]
Abstract
In Europe, the majority of the population lives in areas where air quality levels frequently exceed WHO’s ambient air quality guidelines [1]. Nevertheless, concentrations of PM10 and PM2.5 have been shown to decrease in the last 10 years in many areas [1,2], although there is still place for improvement.
Currently, long time series of air pollution data can only be obtained from specific stations instrumented with costly air quality monitors. This setting provides accurate data but, given the cost associated with this type of sites, the number of stations per city is limited. As a result the spatial variability within cities is hardly studied, and consequently the personal exposure to different pollutants can only be calculated with some limitations. However, the within city variability is sometimes studied by carrying out intensive sampling campaigns. Some of these studies carried out in Barcelona are summarized here [3-6].
The NO2 concentrations have been shown to vary widely across the city, being much higher close to traffic hotspots. The NH3 concentrations also showed spatial variations [3]. NH3 concentrations were significantly higher at urban background than at traffic sites during summer, probably indicating the impact of emissions from biological sources, such as humans, sewage systems and garbage containers. Conversely, in winter, levels were higher at traffic sites, suggesting a contribution from vehicle emissions.
The particulate matter (PM) composition and sources influencing personal exposure of pregnant women in Barcelona was investigated [4]. To this end, indoor, outdoor and personal exposure measurements were carried out for a selection of 54 pregnant women for PM2.5, black smoke, major and trace elements, and polycyclic aromatic hydrocarbons (PAHs) concentrations. PM2.5 concentrations were higher for personal samples than for indoor and outdoor environments. The contribution of the PM sources found varied widely among women, especially for cigarette (from zero to up to 4 µg/m3), train/subway (up to more than 6 µg/m3) and cosmetics (up to more than 5 µg/m3). These findings reveal the wide variation of exposure concentrations for women living in the same city.
Another study investigated the trace and major elements concentrations in PM10 and PM2.5 at 20 sites spread in the Barcelona metropolitan area [5]. Collected samples were analyzed for elemental composition. Several differences among sites were identified: at the traffic sites Ba, Cr, Cu, Fe, Mn, Mo, Pb, Sn, Zn and Zr were found in higher concentrations (Figure 1); Br, Cl, K, and Na (sea salt origin) and Ni, V and S (shipping emissions) concentrations were higher at the coastal sites; and Zn and Pb (typically industrial tracers) concentrations were higher at sites closer to industrial facilities. These results again confirm the within-city variability for different pollutants.
A large study carried out in 40 schools in Barcelona [6] showed that average indoor and outdoor PM2.5 concentrations recorded at the schools were significantly higher than ambient concentrations registered at a reference urban background site. Hence, this indicates the necessity of having spatially-resolved measurements to be able to assess children exposure to air pollution.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
4.588
4.586
4.584
4.582
4.580
x10
6
434432430428426 x103
120
80
40
Cu PM10
Figure 1. Average copper concentrations in PM10 (ng/m3) at 20 sites in Barcelona [5].
In order to solve these limitations and progress towards a better spatially-resolved pollutants exposure, several sensors have been developed to monitor gaseous pollutant concentrations (mainly O3, NO2, NO, SO2, VOCs, CO and CO2), although research is still underway for sensors to measure PM concentrations. These sensors would enable to obtain spatially-resolved concentrations of different pollutants at a reasonable cost. Currently, most air quality sensors have been only tested under laboratory conditions, whereas real-world tests are scarcer and in some cases not as promising as for laboratory tests. Nonetheless, several past and ongoing projects are based on new sensor technologies for air quality monitoring [7].
References 1. EEA, 2013. Air quality in Europe - 2013 report. EEA Report No 9/2013, 107 pp. ISSN 1725-9177. 2. Cusack M., A. Alastuey, N. Perez, J. Pey, X. Querol, “Trends of particulate matter (PM2.5) and chemical
composition at a regional background site in the Western Mediterranean over the last nine years (2002–2010)”, Atmospheric Chemistry and Physics, 12 (2012) 8341-8357.
3. Reche C., M. Viana, M. Pandolfi, A. Alastuey, T. Moreno, F. Amato, A. Ripoll, X. Querol, “Urban NH3 levels and sources in a Mediterranean environment”, Atmospheric Environment, 57 (2012) 153-164.
4. Minguillón M.C., A. Schembari, M. Triguero-Mas, A. de Nazelle, P. Dadvand, F. Figueras, J.A. Salvado, J.O. Grimalt, M. Nieuwenhuijsen, X. Querol, “Source apportionment of indoor, outdoor and personal PM2.5 exposure of pregnant women in Barcelona, Spain”, Atmospheric Environment 59 (2012) 426-436.
5. Minguillón M.C., M. Cirach, G. Hoek, B. Brunekreef, M. Tsai, K. de Hoogh, A. Jedynska, I.M. Kooter, M. Nieuwenhuijsen, X. Querol, “Spatial variability of trace elements and sources for improved exposure assessment in Barcelona”, Atmospheric Environment 89 (2014) 268-281.
6. Rivas I., M. Viana, T. Moreno, M. Pandolfi, F. Amato, C. Reche, L. Bouso, M. Alvarez, A. Alastuey, J. Sunyer, X. Querol, “Child exposure to indoor and outdoor air pollutants in schools in Barcelona, Spain”, Environment International, submitted.
7. Castell N., M.Viana, M.C. Minguillón, C. Guerreiro, X. Querol. Real-world application of new sensor technologies for air quality monitoring. ETC/ACM Technical Paper 2013/16.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
PARTICULATE MATTER IN DIFFERENT ATMOSPHERIC RESERVOIRS: COPENHAGEN, A HIGHLY POPULATED AREA
VERSUS STATION NORD, A REMOTE HIGH ARCTIC SITE
A. Massling1, J. K. Nøjgaard1, T. Ellermann1, H. Skov1, Q. Nguyen2, O. Hertel1
1Department of Environmental Science, Aarhus University, 4000 Roskilde, Denmark 2Department of Chemistry, Aarhus University, 8000 Aarhus, Denmark
Introduction Particulate matter (and especially ultrafine particles with diameters < 100 nm within the submicrometer size range) has attracted much attention in recent years as it is suspected to cause adverse health effects [1]. The human activities in major cities principally lead to the emission of submicrometer particles. Here, exposure levels can be very high, but up to now no regulations on the exposure levels of ultrafine particles are settled within EU. In remote areas as the Arctic no dominant particle sources of anthropogenic origin are observed. But during certain time periods pollution from other parts of the world reaches the Arctic (Arctic haze) leading to a contamination of the Arctic atmosphere. In the Arctic, climate effects are of major interest in view of the strong changes of the Arctic environment as there is the increase of the Arctic surface temperature and the corresponding acceleration of the melting of ice [2].
Measurement sites Two measurement areas were used to investigate particle physical and chemical parameters in different atmospheric reservoirs. Area 1: three stations in and around the greater Copenhagen area, an urban curbside station (H. C. Andersens Boulevard), an urban background site (H.C. Ørsteds Institute) and a regional background site west of Copenhagen (RISØ peninsula). Area 2: Villum Research Station (VRS) at Station Nord (81o36’N, 16o40’W) in North East Greenland.
Methods A Differential Mobility Particle Sizer (DMPS) was operated at the stations in the Copenhagen area to measure the particle number size distribution in the submicrometer size range (6 to 700 nm) for more than 10 years [3]. A Scanning Mobility Particle Sizer (SMPS) was operated at Villum Research Station (VRS) (10 to 900 nm) to measure the particle number size distribution from 2010 and ongoing. A filterpack sampler was used at VRS to receive weekly samples of TSP and a SM200 was applied at the urban background to receive daily samples of PM2.5. Analysis of these samples for elemental and inorganic composition was done by ICP-MS and ion-chromatography. Elemental and organic carbon was analyzed on weekly samples of PM10 at VRS and on daily samples of PM2.5 at the urban background in Copenhagen received from a high volume sampler using a thermo optical method. Based on the data, source apportionment was performed using COnstrained Physical REceptor Modelling (COPREM) in order to clarify the origin of the observed aerosol [4].
Results Particle number concentrations were calculated for specified size regimes and are shown in Figure 1 for the Copenhagen area. As a general finding, the particle number concentrations are highest at the urban curbside for all different size regimes and decrease with distance to potential sources, meaning the lowest concentrations are found in the regional background. Particle number concentrations in all different size regimes show a decreasing trend at the
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation urban curbside over the last nine years, which is in agreement to the development of combustion engine technology, the reduction of sulfur content in fuels and the application of after treatment technologies as e.g. diesel particle filters. Total yearly number concentrations at the curbside station decreased from about 26000 cm-3 in 2002, and about 21000 cm-3 in 2006 to about 15000 cm-3 in 2013.
0
2000
4000
6000
8000
10000
12000
14000
Dp=6nm-40nm Dp=40nm-110nm Dp=110nm-700nm
Pa
rtic
le n
um
be
r c
on
ce
ntr
ati
on
N in
cm
-3
Size fraction
regional background 2005-2007 urban background 2005-2007 urban curbside 2005-2007regional background 2008-2010 urban background 2008-2010 urban curbside 2008-2010regional background 2011-2013 urban background 2010-2013 urban curbside 2011-2013
Figure 1. Averaged particle number concentrations measured for 2005 – 2007, 2008 – 2010, 2011 – 2013 in specific size regimes: DpR1 = 6–40 nm, DpR2 = 40–110 nm and DpR3 = 110–700 nm at the different stations.
In contrast, total monthly median number concentrations at the Arctic site were between 90 and 330 cm-3 in 2012. A detailed view shows a clear seasonal cycle of the particle number size distribution in the Arctic indicating a persistent accumulation mode during November - February, which became more prominent from March to May representing the Arctic haze period at that site. This accumulation mode is expected to originate from long-range transported air masses. The number of particles is very small compared to urban highly populated areas or even regional background areas, but the climate effect of these particles can be significant in terms of e.g. the amount of black carbon, which is deposited on snow- and ice- covered surfaces accelerating the melting of these surfaces. Source apportionment of urban background PM2.5 aerosols in Denmark concluded secondary inorganic aerosols to be the most abundant (38% of PM2.5). While marine sea salt particles (8%) and secondary organic aerosols (10%) are the major natural sources, minor natural sources include primary biological aerosol particles and a crustal source. Biomass burning and coal combustion are the major anthropogenic sources accounting for 7% of PM2.5 each, whereas traffic, oil combustion and additional anthropogenic sources are also observed. In contrast, only 4-5 sources could adequately account for sources to TSP at the Arctic site Station Nord. Natural sources include a marine and a crustal source. Abundant anthropogenic sources are related to mining activities (Zn and Cu/Ni, respectively), and combustion of fossil fuels, which primarily originates from Siberia, Russia.
Acknowledgement This work was financially supported by the Danish Environmental Protection Agency.
References 1. Hoek, G., Krishnan, R. M., Beelen, R., Peters, A., Ostro, B., Brunekreef, B., Kaufman, J. D., “Long-term
air pollution exposure and cardio- respiratory mortality: a review”, Environ. Health, 12 (43) (2013), doi:10.1186/1476-069X-12-43.
2. ACIA report, “Arctic Climate Impact Assessment”, Assessment report, Cambridge University Press (2004). 3. Massling, A., Nøjgaard, J. K., Ellermann, T., Ketzel, M., Nordstrøm, C., “Particle project report 2008 –
2010: Particulate contribution from traffic in Copenhagen”, NERI Technical Report No. 837 (2011), 62 p. 4. Wåhlin, P. , “COPREM - A multivariate receptor model with a physical approach”, Atmos. Environ., 37
(2003) 4861-4867.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Invited Talk
TOWARDS ZERO-POWER GAS DETECTION SYSTEMS BASED ON
SINGLE NANOWIRES
Jordi. Samà1, Juan Daniel Prades
1, Olga Casals
1, Sven Barth
2, Joaquin Santander
3,
Carles Cané3, Isabel Gracia
3, Albert Romano-Rodriguez
1,
1Universitat de Barcelona (UB), MIND-IN2UB-Dept. Electrònica, c/Martí i FRanquès, 1; E-
08028 Barcelona, SPAIN; e-mail: [email protected] 2Technical University of Vienna, Am Gretreidemarkt 8, A-1060 Vienna, AUSTRIA
3Consejo Superior de Investigaciones Científicas (CSIC), Institut de Microelectrònica de
Barcelona, E-08193 Bellaterra, SPAIN
Abstract
Nanowires have emerged as potential building blocks for future sensing devices thanks to
their large surface-to-volume ratio [1] and to the possibility of growing them monocrystalline
and almost defect-free [2], which gives rise to controlled and reproducible properties. For the
fabrication of gas sensors using, for example, metal oxide nanowires as active elements,
similar paths as for the integration of metal oxide nanoparticles for this purpose have been
followed: dispersion or growth of the nanowires on top of interdigitated electrodes. This has
not given rise to substantial differences between both approaches, as the sensing properties in
both cases arise mostly from the inter-grain or inter-nanowire contact. However we have
demonstrated that the basic gas sensing response that would be obtained from using
individual nanowires instead of bundles are kept and this has paved the way of working with
individual objects, which allows for an increased miniaturization and low power consumption
devices. It is exactly around this principle that we have worked in the development of gas
sensing based on individual metal oxide nanowires.
In this work we will present the results of our research in developing gas detection
systems based on individual nanowires. For this purpose we have been using single
crystalline, dislocation free metal oxide nanowires (SnO2, In2O3, …) with diameter in the
range of 40 to 400 nm, synthesized by chemical vapor deposition (CVD) of molecular
precursors [Sn(OtBu)4 for the case of SnO2] [2] grown on ceramic substrates. The nanowires
have been removed from these substrates and transferred onto different types and sized
suspended microhotplates with integrated heater and interdigitated microelectrodes, some
developed ad-hoc for this purpose, others from commercial origin. Advanced metallization
techniques based on Focused Electron Beam Induced Assisted Deposition (FEBID) inside an
SEM instrument have been carried out to fabricate the contacts to the individual nanowires
[3], the resulting device being depicted in Figure 1.
Two different low-power operation modes are identified according to the heating method
used to achieve the high temperature operation required for these devices. On the one hand,
the independent use of the microhotplate’s integrated heater to reach the operation
temperature and of the interdigitated electrodes to allow the measurement of the resistance
change in the presence of different gases. Typical power values to achieve the adequate
operating temperature can be as low as 8 mW. This has allowed us the development of a
portable gas detection system based on these devices and that can be operated with batteries,
as shown in Figure 2.
On the other hand, the self-heating of the nanowires when a measuring current flows
through them allows the simultaneous the heating and measuring the nanowire, dramatically
reducing the power consumption by 2-3 orders of magnitude and simplyfing the practical
operation of the devices. However, the required control electronics that assures the correct and
stable current flow through the device becomes much more complex. Based on this approach
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Invited Talk
we have developed a portable detection system that uses a thermoelectric generator to provide
the required operating power to both heat and read-out the gas sensing results [4].
In this work we will show which is the degree of maturity of both approaches in the way
to develop almost zero-power gas detection systems based on individual nanowires and we
will critically discuss the steps required to further improve the sensing properties and to
transfer the approach for mass production.
Fig. 1: Microhotplate with contacted nanowire and zoom into it.
Fig. 2: (Left)Portable gas detection system based on microhotplate and individual nanowires. (Right) Gas
sensing result and comparison with the gas concentration.
References
1 S. Barth, F. Hernandez-Ramirez, J.D. Holmes, A. Romano-Rodriguez, “Synthesis and applications of
one-dimensional semiconductors”, Progress in Materials Science 55 (2011) 563-629.
2 S. Mathur, S. Barth, H. Shen, J. C. Pyun, U. Werner, “Size-dependent photoconductance in SnO2
nanowires” Small 1 (2005) 713-719.
3 F. Hernandez-Ramirez, A. Tarancon, O. Casals, J. Rodriguez, A. Romano-Rodriguez, J. R. Morante, S.
Barth, S. Mathur, T. Y. Choi, D. Poulikakos, V. Callegari, P. M. Nellen, “Fabrication and electrical characterization of circuits based on individual tin oxide nanowires”, Nanotechnology 17 (2006) 5577-
5583.
4 J.D. Prades, R. Jimenez-Diaz, F. Hernandez-Ramirez, S. Barth, A. Cirera, A. Romano-Rodriguez, S.
Mathur, J.R. Morante, “Ultralow power consumption gas sensors based on self-heated individual
nanowires”, Applied Physics Letters 93 (2008) 123110.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Invited Talk
GAS SENSING WITH EPITAXIAL GRAPHENE ON SILICON
CARBIDE: PERFORMANCE TUNING FOR AIR QUALITY CONTROL
J. Eriksson1, D. Puglisi
1, H. Fashandi
1, R. Yakimova
1,2, A. Lloyd Spetz
1
1 Department of Physics, Chemistry, and Biology, Linköping University, Sweden;
[email protected] 2Graphensic AB, SE-58333 Linköping, Sweden
Graphene-based gas sensors normally show ultra-high sensitivity to certain gas molecules
while suffering from poor selectivity and slow response and recovery. Several approaches
based on graphene functionalization have been demonstrated to improve these issues, but
most such measures result in poor reproducibility. Here we report on surface modifications of
epitaxial graphene on SiC (EG) with metal and metal-oxide nanostructures, formed by highly
reproducible thin film deposition techniques, and their effect on the electronic properties of
the graphene and on gas interactions at the graphene surface. It is demonstrated that under the
right metallization or decoration conditions the electronic properties of the surface remain
those of graphene, while the surface chemistry can be modified to improve sensitivity,
selectivity and speed of response toward e.g. nitrogen dioxide (NO2) or certain toxic volatile
organic compounds (VOCs). These gases are important to monitor due to their high toxicity
already at parts per billion (ppb) concentrations. Sensors with extremely low detection limits,
selective towards these gases, can be useful for air quality control applications.
Large area epitaxial graphene was prepared by sublimation of SiC and subsequent
graphene formation on semi-insulating, Si-terminated, 4H-SiC (0001) on-axis substrates at
2000°C in argon and at a pressure of 1 bar [1]. Chemiresistor sensor devices were
manufactured on the EG by deposition of Ti/Pt electrodes and subsequent mounting onto a
sensor header with integrated heater and temperature sensor. The sensor response to ppb
amounts of NO2 and several toxic VOCs was evaluated from room temperature to 200°C for
sensors with and without surface modification.
Reproducibility problems in graphene sensors normally originate from inhomogeneities or
imperfections arising from the graphene synthesis. We have previously demonstrated that
monolayer graphene is crucial for optimum gas sensitivity, related in part to the relationship
between energy dispersion and the graphene layer thickness [2]. It is therefore desirable to
have uniform monolayer graphene as starting material, and the talk will include a brief
description on recent progress in growth of epitaxial graphene on SiC. Sensors manufactured
on uniform monolayer epitaxial graphene show excellent reproducibility, as seen in Fig. 1,
showing the response to 50 and 100 ppb NO2 for three different sensors.
Surface potential mapping by scanning Kelvin probe microscopy on the graphene used in
this study showed a distribution of about 90% mono and 10 % bilayer graphene, where the
contrast arises from their differing work functions [3]. After deposition of very thin (0-5 nm)
metal or metal-oxide nanostructures, the morphology showed the formation of grains or
nanoparticles. However, surface potential mapping demonstrated that the electronic properties
of the surface remain those of graphene.
The effect of decoration on the sensor response strongly depends on the choice, thickness
and nanostructure of the material [4]. Decoration with Au of a certain structure gave a
significantly larger and faster response to ppb concentrations of NO2 compared to the as-
grown graphene (see Fig. 2a and 2b), with a detection limit below 1 ppb (Fig. 2c), while
suppressing response to CO and H2 (Fig. 2d). In general, the sensitivity, selectivity and
response time to NO2 are significantly affected upon modifying the graphene surface by the
addition of thin, nanostructured Au or Pt. It is expected that decoration with different metals
or metal-oxide nanostructures will allow careful targeting of selectivity to specific molecules.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Invited Talk
Our preliminary results indicate that decoration with TiO2 quantum dots and nanoparticles can
be used in a similar way to detect ppb concentrations of benzene and naphthalene,
respectively, and that the selectivity depends on the size of the structures.
60 70 80 90 100 110 120 130 1401,00
1,05
1,10
1,15
1,20
1,25
NO2
Air
100 ppb50 ppb
No
rmaliz
ed R
esis
tan
ce
Time (hours)
sensor 1
sensor 3
sensor 2
Figure 1. Reproducibility: Nearly identical response (at 100°C) to NO2 for three different sensors manufactured
on as-grown epitaxial monolayer graphene on SiC.
0 100 200 300 400
10
15
20
25
30
35
40
45
Au on graphene
Se
nso
r re
sp
on
se
(%)
NO2 concentration (ppb) in N
2/ 20% O
2
0 2 4 6 8 10 12 14 16 18 20 22
1,0
1,2
1,4
1,6
1,8
2,0
Re
sis
tance c
hange R
/R0
Time (hours)
0
200
400
600
800
1000
NO
2 c
oncentr
ation (
ppb)
in N
2
Au on graphene 100°C
RT
0 5 10 15 20 25 30 35
1,0
1,1
1,2
1,3
1,4
1,5
1,6
1,7
Re
sis
tance c
hange R
/R0
Time (hours)
0
20
40
60
80
100
120
140
100°C
NO
2 c
oncentr
ation (
ppb)
in N
2As grown graphene
0 2 4 6 8 10 12 14 16 18
0,50,60,70,80,91,01,11,21,31,41,51,6
Resis
tance c
han
ge R
/R0
Time (hours)
500 ppb
NO2
40 ppm
NH3
50 ppm
NH3
100 ppb
NO2
250 ppm
H2
500 ppm
CO
50 ppb
NO2
30 ppb
NO2
400 ppb
NO2
100°C
RT
(b) (a)
(c) (d)
Fig. 2. Effect of Au decoration on sensor performance: Response at room temperature and 100°C to NO2
concentrations ranging from 10 ppb to 500 ppb for as-grown graphene (a), graphene decorated with <5 nm of
nanopouros Au (b) (due to small response, the signal at RT for as-grown graphene is not shown). c) Response
versus NO2 concentration after Au decoration; d) response to NO2, NH3, H2, and CO for Au decorated EG.
References 1. R. Yakimova, C. Virojanadara, D. Gogova, M. Syväjärvi, D. Siche, K. Larsson, L. I. Johansson, "
Analysis of the formation conditions for large area epitaxial graphene on SiC substrates" Mater. Sci.
Forum 565–568 (2010), 645-648. 2. R. Pearce, J. Eriksson, T. Iakimov, L. Hultmann, A. Lloyd Spetz, and R. Yakimova, "On the Differing
Sensitivity to Chemical Gating of Single and Double Layer Epitaxial Graphene Explored Using
Scanning Kelvin Probe Microscopy" ACS Nano 7 (5) (2013), 4647–4656.
3. J. Eriksson, R. Pearce, T. Iakimov, C. Virojanadara, D. Gogova, M. Andersson, M. Syväjärvi, A. Lloyd
Spetz, and R.Yakimova, " Influence of Substrate Morphology on Thickness Uniformity and
Unintentional Doping of Epitaxial Graphene on SiC ", Appl. Phys. Lett.100 (2012), 2416071-4.
4. J. Eriksson, D. Puglisi, Y. H. Kang, R. Yakimova, and A. Lloyd Spetz, "Adjusting the electronic
properties and gas reactivity of epitaxial graphene by thin surface metallization" Physica B 439 (2014),
105–108.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
SENSING DEVICES BASED ON METALLOPHTHALOCYANINES AND METALLOPHTHALOCYANINE/NANOCARBONS HYBRID
MATERIALS: APPLICATION TO AROMATIC HYDROCARBONS DETECTION
J. Brunet1,2, A. Kumar1,2, A.L. Ndiaye1,2, A. Pauly1,2 1Clermont Université, Université Blaise Pascal, Institut Pascal, BP 10448, F-63000
Clermont-Ferrand; [email protected] 2CNRS, UMR 6602, Institut Pascal, F-63171 Aubière, France
Objective and motivations Volatile Organic Compounds (VOCs) are a variety of gaseous chemicals coming from biogenic processes or anthropogenic activities which exhibit hazardous effects on environment and people. If some of them can have a direct impact on health, others are involved in photochemical processes leading to the formation of secondary pollutants like ozone. Among all these compounds, Benzene, Toluene and Xylenes (BTX) have their own exposure limits defined by international health organizations, environmental agencies and Institutions (WHO, OSHA, US EPA, European Parliament and Council). These values are from few ppm for general public to 200 ppm in occupational context. In France, the recent second Environment Health National Plan reiterates the necessity to decrease the level of VOCs emission with a special focus on benzene. Thus, because of their ubiquity as well as their high toxicity, their monitoring remains full of interest and sensor development worthy of investigation. This lecture deals with the potentialities of metallophthalocyanines and phthalocyanine/carbon nanotubes as sensitive materials of chemical sensors for BTX monitoring. The intercomparison of sensing performances has been achieved and will be discussed.
Relevance of metallophthalocyanines-based QCM sensors for BTX detection Because of the presence of benzene rings at peripheral position of the macrocycle, metallophthalocyanines can interact with aromatic compounds through π-stacking interactions leading to gas adsorption. The involved interaction forces remaining weak, chemisorption is unlikely and Quartz Crystal Microbalance (QCM) appears as the most attractive transducers to quantify the adsorption rate as well as to develop highly sensitive sensors. Another interest of metallophthalocyanines for sensor development is the great facility to achieve thin films by several techniques of deposition. Among these molecular materials, we have clearly established that tetra-tert-butyl metallophthalocyanines exhibit a high affinity to toluene and xylenes as compared to unsubstituted ones. To develop QCM-based sensors, thin films of tetra-tert-butyl-metallophthalocyanines including copper or zinc as central metal atom (ttb-MPc; M = Cu, Zn) have been deposited by thermal evaporation on AT-cut quartz crystals and characterized by FT-IR spectroscopy. With a resolution close to 10 ppm, a threshold of few ppm, a high level of reproducibility and stability (see Fig.1), such sensing devices working at room temperature are well-adapted to achieve the BTX monitoring in the concentration range corresponding to the guidelines and standards. Their insensitivities to CO, H2S and NO2 have been highlighted by experiments and point out their partial selectivity to aromatic hydrocarbons. The interaction of ozone will be also illustrated and discussed.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
Figure 1. ttb-CuPc-based QCM sensor response toward toluene at room temperature; a) time-dependence
response; b) frequency shift during 3 minutes of exposure versus toluene concentration.
Sensing properties of phthalocyanine/nanocarbons hybrid materials
The aromatic nature of metallophthalocyanines and the delocalization of π-electrons can also explain the strong interaction of this material with nanocarbonaceous matrix. Moreover, the substitution of peripheral hydrogen atoms of phthalocyanine macrocyle by tert-butyl groups improves the solubility of these compounds. As a consequence, ttb-CuPc and ttb-ZnPc can be immobilized on nanocarbons resulting in a non-covalent functionalization which can be performed into an appropriate solvent. Because of the high specific surface area of nanocarbons, an enhancement of sensor sensitivity should be obtained. QCM-based sensors were thus realized with ttb-MPc/SWCNTs as sensitive material and compared to ttb-CuPc-based sensing devices previously described. The functionalization of carbon nanotubes was performed into chloroform to ensure a better dispersion of macrocycles and thin films were consecutively obtained by drop-casting process on AT-cut quartz crystals. Functionalized carbon nanotubes were characterized by TEM (Fig. 2), TGA and UV-vis spectroscopy: the presence of phthalocyanine molecular units at the surface of the nanocarbonaceous materials was proven. Calibration curves of QCM sensors were determined towards toluene and xylene at room temperature and pointed out the increase in sensor sensitivity as compared to ttb-CuPc (see Fig. 3) most likely due to the higher surface/volume ratio of the hybrid material.
Figure 2. TEM micrograph of ttb-CuPc / CNTs
hybrid material. Figure 3. Comparative sensor sensitivities towards
toluene for SWCNTs, ttb-CuPc and ttb-CuPc/SWCNTs thin layers at room temperature.
COST Action TD1105 EuNetAir
2nd
International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Invited Talk
DETECTION OF LOW CONCENTRATIONS OF VOLATILE
ORGANIC COMPOUNDS WITH SIC-FIELD EFFECT TRANSISTORS
D. Puglisi1, C. Bur
1,2, J. Eriksson
1, M. Andersson
1, A. Lloyd Spetz
1, and A. Schuetze
2
1Department of Physics, Chemistry and Biology, Applied Sensor Science Division, Linköping
University, SE-58183, Linköping
2Department of Mechatronics, Laboratory for Measurement Technology, Saarland
University, D-66123 Saarbruecken
Emails: [email protected]; [email protected]; [email protected]; [email protected];
[email protected]; [email protected]
Abstract
Common living environments such as homes, schools, or workplaces, where the exposure to
indoor air pollutants is continuous or prolonged, have become dangerous sites of health
problems related to bad air quality.
Volatile organic compounds (VOCs) are a large group of carbon-based chemicals with the
tendency to evaporate easily at room temperature. When released to the atmosphere, they can
act as significant precursors of photochemical reactions to form hazardous indoor air
pollutants, with well-documented adverse health effects [1]. Common symptoms include
headache, vertigo, respiratory problems like asthma, skin irritation, hypersensitivity to odors
and tastes, but also acute effects related to personality change or cancer depending upon
toxicological characteristics of the hazardous substances, duration or frequency of exposure,
people’s age, and other related factors [2]. A proper reduction of VOC emissions is needful in
order to decrease the atmospheric levels as well as reduce human exposure to this kind of air
pollutants, thus reaching effective health protection measures. For this purpose, it is necessary
to develop adequate highly-sensitive low-cost gas sensors and devices able to monitor and
control the emissions of harmful substances even at ultra-low concentrations [3,4].
Gas sensitive field effect devices based on silicon carbide (SiC) have over the last years
shown good possibilities of realizing sensors for high temperature applications such as
combustion control or monitoring of car exhaust after-treatment systems [5], mainly taking
advantage of the wide band gap and chemical inertness of the semiconductor material. The
same properties are, however, also beneficial to certain room temperature applications such as
environmental monitoring and control, especially when targeting VOCs.
In this study we show how iridium-gated silicon carbide field effect transistors (SiC-FETs)
can be used as highly-sensitive low-cost gas sensors for the detection of ultra-low
concentrations of specific VOCs, for indoor air quality monitoring and control. Formaldehyde,
naphthalene and benzene were used as typical VOCs.
Gas tests were carried out at three different temperatures, 260°C, 300°C and 330°C, in dry air
and under effect of 10% and 20% relative humidity (r.h.). For all gas measurements Ir-gated
SiC-FET gas sensors operated in a constant current mode measuring the drain-source voltage
as the sensor signal [6].
The sensor performance and characteristics were studied in terms of sensitivity, detection
limit, long-term stability, response and recovery times, reproducibility, repeatability,
temperature dependence and effect of relative humidity.
The best operating conditions were found at 330°C at a gate bias of about 2V. In such
conditions, we investigated the effect of r.h. up to 60% especially in terms of detection limit.
A significant dependence on r.h. appeared only in the case of formaldehyde, lowering the
sensitivity from 45 mV/ppb (detection limit 0.2 ppb, response time 1 min) in dry air to 0.4
mV/ppb under 10% r.h. (detection limit 10 ppb, response time 12 min), see Figure 1.
COST Action TD1105 EuNetAir
2nd
International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Invited Talk
Naphthalene was detected down to 0.5 ppb with a sensitivity of 36 mV/ppb under 20% r.h.
(response time 2 min) and down to 5 ppb under 60% r.h. with a sensitivity of 0.4 mV/ppb
(response time 5 min), whilst benzene down to 0.5 ppb with a sensitivity of 6 mV/ppb under
20% r.h. (response time 4 min) and down to 3 ppb with a sensitivity of 0.3 mV/ppb under
60% r.h. (response time 18 min). Results are summarized in table 1.
Surface characterization by atomic force microscopy did not reveal any significant surface
degradation due to prolonged exposure to VOCs and high operating temperature.
To get further, new sensing materials as well as smart sensing and data evaluation will be
needed in order to differentiate between the VOC components.
0 1 2 3 4 5 6 7 8 9 10 11 120,85
0,90
0,95
1,00
DRY AIR
1 ppm
100 ppb
10 ppb500 ppt1 ppb 200 ppt
330°C
Se
nso
r S
ign
al (n
orm
. va
lue
s)
Time (h)
Formaldehyde (CH2O)
10% R.H.
Figure 1. Response of a Ir-gated gas sensitive SiC-FET based sensor to ppb and ppt concentrations of
formaldehyde, at 330°C in dry air and under 10% of relative humidity.
Table 1. Sensor’s characteristics at 330°C and under different levels of relative humidity.
FORMALDEHYDE NAPHTHALENE BENZENE
Dry air 10% r.h. 20% r.h. 60% r.h. 20% r.h. 60% r.h.
Sensitivity
(mV/ppb) 45 0.4 36 0.4 6 0.3
Detection limit
(ppb) 0.2 10 0.5 5 0.5 3
Response time
(min) 1 12 2 5 4 18
References 1. H.R. Anderson, “Air pollution and mortality: A history”, Atmospheric Environment 43 (2009) 142-152.
2. H. Salonen, A-L. Pasanen, S. Lappalainen, H. Riuttala, T. Tuomi, P. Pasanen, B. Bäck, K. Reijula,
“Volatile Organic Compounds and Formaldehyde as Explaining Factors for Sensory Irritation in Office
Environments”, Journal of Occupational and Environmental Hygiene 6:4 (2009) 239-247.
3. M. Penza, Overview of the COST Action TD1105 EuNetAir, Intern. Meet. Chem. Sensor 2012.
4. C. Bur, P. Reimann, M. Andersson, A. Lloyd Spetz, A. Schütze, “Increasing the selectivity of Pt-gate SiC
field effect gas sensors by dynamic temperature modulation”, IEEE Sensors Journal 12 (6) (2012) 1906-
1913.
5. M. Andersson, A. Lloyd Spetz, R. Pearce, “Recent trends in Silicon Carbide (SiC) and Graphene based
gas sensors”, in: Semiconductor gas sensors, Eds. R. Jaaniso and O.K. Tan, Chapter 4, pp. 117-158,
Woodhead Publishing Series in Electronic and Optical Materials No. 38, 2013. ISBN: 978-0-85709-236-6
(Print), 978-0-85709-866-5 (Online), DOI: 10.1533/9780857098665
6. D. Puglisi, J. Eriksson, C. Bur, A. Schütze, A. Lloyd Spetz, M. Andersson, “Silicon carbide field effect
transistors for detection of ultra-low concentrations of hazardous volatile organic compounds”, Materials
Science Forum 778-780 (2014) 1067-1070.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Oral Presentation
ELECTRODEPOSITED NANOSTRUCTURED MATERIALS FOR GAS
SENSING N. Cioffi
1, E. Dilonardo
1, C. Di Franco
2, A. Afzal
3, M. Alvisi
4, M. Penza
4, F. Palmisano
1, L.
Torsi1
1Department of Chemistry, Università degli Studi di Bari ‘Aldo Moro’, Via E. Orabona 4 -
70126, Bari (BA), ITALY;[email protected] 2CNR-IFN LIT3, Dip. Interuniversitario Fisica “M. Merlin” Università degli Studi Di Bari
‘Aldo Moro’ Via Amendola, 173 - 70126 Bari (BA), ITALY. 3Affiliated Colleges at Hafr Al-Batin, King Fahd University of Petroleum and Minerals, P.O.
Box 1803, Hafr Al-Batin, 31991, Saudi Arabia 4ENEA, Italian National Agency for New Technologies, Energy and Sustainable Economic
Development Technical Unit for Materials Technologies - Brindisi Research Center, PO Box
51 Br4; I-72100 Brindisi (BR), ITALY.
Nanostructured metal oxides for gas sensors have been frequently investigated since they
offer several advantages, such as the increased surface area–volume ratio and new reactivity
properties, resulting into improved sensing performance levels, as the sensitivity and the
selectivity of the detection, as well as the response and recovery time [1-2]. In the last
decades, gold nanoparticles (Au NPs) have been extensively utilized as active materials in
catalysis, optics, microelectronics, sensor technology, etc., owing to their outstanding size and
shape dependent physico-chemical properties [3]. The reactivity of Au NPs dramatically
changes as a function of the morphology, composition, and crystalline structure [4]. Recently,
hybrid systems consisting of Au NPs dispersed in nanostructured sensing materials, such as
metal oxides (MOx), have attracted much interest in improving the gas sensing performance
[2, 5-6]. In particular, considering the metal-decorated MOx, they have physical properties
that differ from those of the single phase MOx: the presence of catalytic metal nanoparticles
increases the surface reactivity and improves gas diffusion inside the active layer; moreover,
NP-induced catalytic effects can modify the analyte–active layer chemical interactions and
enhance the kinetics of the sensing process [7]. The interfacial region between metal
nanoparticle and sensing material has a different electron band structure which also contribute
to the unique gas sensing properties of this type of hybrid nanocomposite systems [8].
In the present study, Au NPs with controlled dimension and composition have been prepared
by sacrificial anode electrolysis (SAE) in the presence of cationic surfactants. As a result, the
electro-synthetized NPs possess a core-shell structure in which a metal core is surrounded by
a monolayer of the surfactant. This one-step strategy was firstly proposed by the group of
M.T. Reetz to produce highly reactive metal catalysts for organic synthesis applications [9].
In the present study, the SAE method has been modified in order to deposit stabilized Au NPs
directly on the surface of nanostructured MOx powders (Fig.1a). Prior to the SAE step, the
MOx nanophases have been synthesized by sol-gel methods, and then subjected to thermal
annealing prior to the electrosynthesis step. The surface availability of hydroxyl groups on the
MOx nanoparticles was found to strongly influence the electro-decoration step introducing
surface Au nanophases [10]. The resulting hybrid nanocomposites were thermally annealed
under mild conditions and, subsequently, they were morphologically and chemically
characterized using scanning and transmission electron microscopies, as well as X-ray photon
electron spectroscopy which revealed the formation of nanoscale gold, and its successful
decoration on metal oxide nanoparticles (Fig. 1b). Metal ultrafine nanoparticles were shown
to be homogeneously dispersed on the larger MOx nanophases. Despite the thermal
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Oral Presentation
treatments, elemental gold was proven to be by far the most abundant (>95%) Au chemical
environment in the surface of the final nanocomposites.
Figure 1. a) A scheme of the SAE in a three electrode cell (the reference electrode is not shown here). b) TEM
images at different magnification of electrochemically Au NPs-decorated MOx NPs.
Based on the characterization results, and on previous studies on the detection of nitrogen
oxides (NOx) by AuNP-based capacitors [11], we envisage the application of Au NPs-
decorated MOx composites as active layer in gas sensing devices. Work is in progress to
define the best performing device configurations for the selective detection of environmental
pollutants such as NOx.
References 1. M.E. Franke, T.J. Koplin, U. Simon, “Metal and metal oxide nanoparticles in chemiresistors: does the
nanoscale matter?”, Small 2 (2006) 36.
2. A. Afzal, N. Cioffi, L. Sabbatini, L. Torsi, “NOx Sensing with Semiconducting Metal Oxide
Nanostructures: Progress and Perspectives” Sensors and Actuators B 171-172 (2012) 25.
3. A. Moores, F. Goettmann, “The plasmon band in noble metal nanoparticles: an introduction to theory and
applications”, New J. Chem. 30 (2006) 1121.
4. M. Faraday, “The Bakerian Lecture: Experimental Relations of Gold (and Other Metals) to Light”, Philos.
Trans. 147 (1857) 145.
5. S. Basu, P. K. Basu, “Nanocrystalline Metal Oxides for Methane Sensors: Role of Nobel Metals”,
Journal of Sensors 2009 (2009) article ID: 861968.
6. C.Wang, L.Yin , L. Zhang, D. Xiang, R.Gao, “Metal Oxide Gas Sensors: Sensitivity and Influencing
Factors”, Sensors 10 (2010) 2088 7. C. G. Read, E. M. P. Steinmiller, K.-S. Choi, “Atomic Plane-Selective Deposition of Gold Nanoparticles
on Metal Oxide Crystals Exploiting Preferential Adsorption of Additives”, J. Am. Chem. Soc. 131
(2009)12040
8. D. Gu, S. K. Dey, P. Majhi. “Effective work function of Pt, Pd, and Re on atomic layer deposited HfO2”,
Appl. Phys. Lett. 89 (2006) 082907.
9. M.T. Reetz, W. Helbig, Journal of American Chemical Society, 116 (1994) 7401.
10. A. Afzal, C. Di Franco, E. Mesto, N. Ditaranto, N. Cioffi, F. Scordari, G. Scamarcio, L. Torsi,
“Sacrificial Gold Electrolysis on Metal Oxide Surfaces: An Alternate Route for Production of Stable
Supported Gold Nanoparticles”, submitted.
11. N. Cioffi, L.Colaianni, E.Ieva, R. Pilolli, N. Ditaranto, M. D.Angione, S. Cotrone, K. Buchholt, A. L.
Spetz, L. Sabbatini, L. Torsi, “Electrosynthesis and characterization of gold nanoparticles for electronic capacitance sensing of pollutants”, Electrochimica Acta 56 (2011) 3713.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
LOW POWER AND PORTABLE ALGAN/GAN BASED SENSOR
SYSTEMS FOR AIR MONITORING
Rob van Schaijk1
1IMEC/Holst Centre, High Tech Campus 31, 5656AE, Eindhoven, the Netherlands
Abstract
We are developing two sensor platforms for environmental monitoring. For portable air
monitoring sensor systems, requirements to be fulfilled are low power sensitive operation and
small form factor. The sensor platforms are based on AlGaN/GaN HEMT and
electrochemical sensors. The 2DEG formed at the interface between GaN and AlGaN layer is
very sensitive to gas absorption at the interface of the AlGaN layer. At the moment the
development is focussed on NO2 detection at ppb level.
AlGaN/GaN based sensors
There is a high demand for NO2 monitoring devices, which combine sensitivity and
selectivity with compactness, portability and low cost. NO2 is a major air pollutant that is
subject to environmental regulation. We develop sensors meeting these criteria based on
AlGaN/GaN hetero junctions. Recent developments in the growth of epitaxial III-nitride
layers on Si(111) substrates (8”) allow for large scale production of devices with a highly
mobile two dimensional electron gas (2DEG) formed at the interface between GaN and
AlGaN. The sensitivity of these open gate devices can be tuned to the low-ppb range by
precise recessing of the AlGaN sensitive area [1]. This allows for the detection of NO2 at low
ppb levels. In figure 1, the sensor response of NO2 is shown in 50% relative humidity (RH).
The NO2 sensing mechanism of recessed AlGaN/GaN hetero-structures is attributed to the
interaction of NO2 with surface donor states. The response and recovery of the sensor can be
accelerated by slope detection and heating. This speeds up the response time from 30 minutes
to tens of seconds. For this purpose membranes are formed by DRIE etching of the silicon
substrate, to minimize power consumption of the sensor during heating.
The sensors were benchmarked in a field trial with a commercial large and expensive chemo-
luminescent analyser and show comparable sensitivity and response time up to low ppb levels.
To cover large areas the development of a low-cost environmental sensor that can be operated
in a network is of high interest. The GaN sensor can be read-out with a resistive method and
we have developed different solutions. A wireless resistive read-out based on TI’s
microcontroller MSP430 with temperature and humidity compensation is developed. Another
solution with Bluetooth communication with a smartphone using Arduino Uno platform is
also available (see figure 1c).
The extension of this platform for the detection of other gases/vapours will be explored by
temperature modulation and functionalization of the AlGaN surface. High temperature
detection with the use of micro-hotplates is a possibility to detect e.g. volatile organic
compounds at specific temperatures. We will investigate the feasibility of surface
functionalization using thin metal oxide layer (ALD) in combination with catalyst particles.
The purpose of functionalization is to improve the selectivity and sensitivity towards different
gasses. This may be achieved for example by coating the surface of the gate region with
sensing layers that interact with gas species resulting in the formation of surface dipoles or
charges. In the scientific literature, a variety of gas sensors based on GaN HEMT technology
have been demonstrated with proper surface functionalization on the gate area of the HEMTs,
for the detection of gases (e.g. H2, NH3, CO, CO2) [2, 3, 4, 5, 6, 7]. For example, porphyrins
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Invited Talk
can form complexes with metal ions, which are ligated to the four nitrogen atoms in the
central cavity. These metalloporphyrins can bind gas molecules to the metal ion, forming a
dipole [8]. As the nature of the 2DEG at the AlGaN/GaN heterostructure originates from the
polarization of the structure itself, the material is uniquely suited for the detection of surface
dipoles. We show that these metalloporphyrins can be used to detect NO.
A)
B)
C)
Figure 1: A) Sensor response for decreasing NO2 concentrations in N2 measured in 50% RH at elevated
temperature (~200C). B) Schematic of the recessed open gate AlGaN/GaN HEMT structure on Silicon. C)
Photograph of a sensor chip wire bonded in a DIL package. The black box contains the read-out electronics,
heater and wireless communication with mobile phone.
References 1. R. Vitushinsky, M. Crego-Calama, S. H. Brongersma, and P. Offermans, Appl. Phys. Lett. 102, 172101
(2013).
2. J. Schalwig, G. Mueller, O. Ambacher, and M. Stutzmann, Phys. Status Solidi A 185, 39-45 (2001).
3. S. J. Pearton, B. S. Kang, S. Kim, F. Ren, B. P. Gila, C. R. Abernathy, J. Lin, and S. N. G. Chu, J. Phys.:
Condens. Matter 16, R961 (2004). 4. R. Thapa, S. Alur, K. Kim, F. Tong, Y. Sharma, M. Kim, C. Ahyi, J. Dai, J. W. Hong, M. Bozack, J.
Williams, A. Son, A. Dabiran, and M. Park, Appl. Phys. Lett. 100, 232109 (2012).
5. S. C. Hung, C. W. Chen, C. Y. Shieh, G. C. Chi, R. Fan et al. Appl. Phys. Lett. 98, 223504 (2011)
6. Resham Thapa, Siddharth Alur, Kyusang Kim, Fei Tong, Yogesh Sharma et al. Appl. Phys. Lett. 100,
232109 (2012).
7. J. Schalwig, G. Müller, M. Eickhoff, O. Ambacher, M. Stutzmann Sensors and Actuators B 87 425-430
(2002).
8. M. A. Garcia, M. Losurdo, S. D. Wolter, W. V. Lampert, J. Bonaventura, G. Bruno, C. Yi, and A. S.
Brown, Sensor Lett., vol. 6, no. 4, pp. 627-634, (2008).
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
CMOS-BASED SENSORS FOR UBIQUITOUS GAS DETECTION: CHALLENGES AND OPPORTUNITIES
M.F. Chowdhury1, J.W. Gardner1,2, F. Udrea1,3, S.Z.Ali1, S. Stacey1 1Cambridge CMOS Sensors, 59 St Andrews Street, Cambridge CB2 3BZ, UK;
[email protected]; 2University of Warwick, Coventry CV4 7AL, UK; [email protected]; 3University of Cambridge, Cambridge CB2 1TN, UK;
Abstract An ever increasing demand for sensors in the consumer, industrial, automotive, and healthcare markets is driving forward technological advances in ubiquitous sensors for a wide range of new applications [1]. The very high volumes and low unit cost required is largely made possible by the implementation of MEMS technologies; thereby allowing incorporation into smartphones and tablets. The resultant sensors are ubiquitous cloud-enabled sensors by exploiting 3G/4G, wi-fi, bluetooth and other wireless communication networks for sensor data management and smart signal processing [2]. In this paper we address the need for ubiquitous gas sensors, and concentrate specifically on the progressive miniaturisation of gas sensors based upon CMOS, MEMS technology developed and patented [Reg no: 2464017,
7495300, 06765348.5] by Cambridge CMOS Sensors (CCMOSS); thus enabling high volume, low cost production capabilities for ubiquitous gas sensing applications. In particular, we explore the challenges and opportunities associated with high volume production (>100 M units/year) of CMOS, MEMS technology-based gas sensors and present this in context of supply chain process flow. Figure 1 and 2, shows an overview of the supply chain process steps or typical development stages and options that has been established for production of CMOS-based gas sensors (CO, VOC, Alcohol) for high volume manufacturing.
Figure 1: Supply chain for MEMS CMOS-based Ubiquitous Gas Sensor Production
Technology developed for miniaturising the heating elements (aka micro-hotplates) by CCMOSS is based on standard SOI-CMOS process. The method and concept used has been published in [3,4]. The core technology offers high temperature (> 600ºC) tungsten metallisation and especially developed DRIE, MEMS process at a commercial foundry, which is used for the design of the micro-hotplates. In terms of ubiquitous exploitation of technology, a number of different problems have been solved, perhaps the most critical ones being: reliability, thermal uniformity, reproducibility, stability, low power consumption, and high
Technology
CMOS-SOI
NON-SOI
Bulk
Others
MEMS
DRIE
KOH
Topside
Others
Sensing Material
MOX
Polymer
Pellistor
CNT/Others
Custom
Test
Moulding
Trench
Deposition
Drop
CVD/Others
Dicing
SAW
Stealth
Fracture
QualRel
Burn-in/HTOL etc
Certification
Others
Assembly Test
Batch
Sample
All
Others
Packaging
SMD
Die on PCB
TSV
3D
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation yield. Furthermore, for consumer market applications, and depending of volume threshold, when a SOI-CMOS process does not provide the cost advantage, we have also developed alternative bulk silicon (i.e. non-SOI) options as well as process migration capabilities to lower geometry. Results of the bulk process do not show any performance degradation, in terms of power consumption, reliability and thermal transient response – the factors that are critical for commercial deployment of this technology.
(a) CMOS micro-heater with MEMS DRIE (b) Sensing Material
(c) Wafer-level post-CMOS IDE and Deposition
Gas Sensing Electrodes
(d) Drop coating example (e) Wafer-level test
ng (g) Packaging. Assembly test & QualRel (f) Dici
Figure 2: Examples of process flow for CMOS-based ubiquitous gas sensor production
Conclusions We have shown that to meet the demand for high volume (greater than 10 million sensors per month), the best option is to capitalise on mature CMOS technology for current and future miniature gas sensing applications. Working with commercial foundry partners CCMOSS has developed process flows where all major post-CMOS tasks are done at the same foundry. Furthermore, we have addressed adhesion, deposition and reliability issues to achieve enhanced performance and enabled multi gas sensing capabilities by incorporating an array of 2×2 sensors on a single 1 mm × 1mm die. To enable ultra-miniaturisation of the sensors, leading edge technologies employed through our high volume packaging and test partners.
References 1. S. Maeng, P. Guha, F. Udrea, et al., SOI CMOS-based smart gas sensor system for ubiquitous sensor
networks. ETRI Journal, Vol.30 (No.4). pp. 516-525. ISSN 1225-6463 2. Ubiquitous Sensor Networks (USN) ITU-T Technology Watch Briefing Report Series, No. 4 (Feb 2008) 3. F. Udrea, J.W. Gardner, et al “Design and simulations of SOI CMOS micro-hotplate gas sensors”,
Sensors and Actuators B, 78 (2001), pp. 180-190. 4. J.W. Gardner, M.T. Cole, et al. “GRAPHENE SOI CMOS SENSORS FOR DETECTION OF PPB
LEVELS OF NO2 IN AIR”, Transducers 2013, Barcelona, SPAIN, 16-20 June 2013.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Oral Presentation
GRAPHENE FOR GAS SENSORS
T. Polichetti 1, F. Ricciardella
1,2, F. Fedi
3, M. L. Miglietta
1, E. Massera
1, and G. Di Francia
1
1 Laboratory for Materials and Devices Basic research, ENEA Research Center, Piazzale E.
Fermi, 1, Portici (Napoli), I-80055, Italy;
[email protected] 2 University of Naples ‘Federico II’, Department of Physics, Via Cinthia, I-80126, Naples,
Italy 1 CNR-Institute for Composite and Biomedical Materials, Piazzale E. Fermi 1, Portici
(Naples), I-80055, Italy
Abstract
Graphene is a monolayer of sp2 hybridized carbon atoms, tightly packed into a two-
dimensional honeycomb lattice, whose amazing properties allow, in principle, a huge range of
applications [1]. Besides optical, electrical, mechanical and thermal properties, the planar
nature of the lattice, which exposes all of its atoms to the environment, provides the highest
value of surface to volume ratio [2]. The combination of this property with the highest carrier
mobility and lowest resistivity value, has pushed researchers into investigating graphene
potential in chemical sensors field [3]. Indeed, after the first experimental evidence that a
graphene flake can detect the presence of even a single interacting molecule [4], many
theoretical and experimental studies have shown that graphene-based chemisensors operating
at room temperature possess pronounced sensitivity to certain analytes (e.g., NH3, CO, NO2,
SO2, H2O). More specifically, the detection of NO2 has achieved an extremely low limit,
below the sub-ppm (parts per million) range, but in some cases graphene was prepared by
laborious and expensive techniques, such as chemical vapour deposition or epitaxial growth,
or by chemically exfoliating graphite oxide, which requires toxic and costly chemicals for
pre- and post-treatments [2, 5-8]. In other cases, specific measures, for instance continuous
exposure of the sensitive material to ultraviolet light, were adopted to reach an even lower
limit, in the range of ppt (parts per trillion) [9]; in any cases is paid the price of employing
time- and energy-consuming systems and/or a more complicated and unwieldy device
structure.
Herein we present a graphene-based chemiresistor prepared by a simple, handy and cheap
fabrication process, that is the liquid phase exfoliation of graphite by means of green solvents.
FIG. 1. TEM image of the flakes produced by chemically exfoliated graphene. The mean lateral size of flake is
of the order of hundred nanometer.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Oral Presentation
The device, tested in controlled environment at a room temperature, exhibits high sensitivity
towards NO2. A calibration for gas concentrations ranging from about 100 ppb up to 1000 ppb
in controlled conditions of pressure, humidity and temperature will be also presented.
(a)
0 10 20 30 40 50
0,99
1,00
1,01
1,02
1,03
1,04
1,05
1,06Wet
Time (min)
G/G
0
350 ppb NO2
(b)
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 753,60x10
-4
3,65x10-4
3,70x10-4
3,75x10-4
50ppb100ppb250ppb
500ppb
Time (min)
Co
nd
uc
tan
ce
(S
)
1000ppb
FIG. 2. (a) Normalized conductance dynamic response of the device upon exposure to 350 ppb of NO2 in
nitrogen atmosphere at RT and RH=50%. (b) Trend of the conductance for different analyte concentrations as
function of exposure time.
References 1. K. S. Novoselov, V. I. Fal’ko, L. Colombo, P. R. Gellert, M. G. Schwab, and K. Kim, “A roadmap for
graphene”, Nature 490 (2012) 192-200.
2. A. K. Geim and K. S. Novoselov, “The rise of graphene” , Nature Mat. 6 (2007) 183-191.
3. K. R. Ratinac, W. Yang, S. P. Ringer and F. Braet, “Toward Ubiquitous Environmental Gas Sensors -
Capitalizing on the Promise of Graphene”, Environ. Sci. Technol. 44 (2010) 1167-1176.
4. F. Schedin, A. K. Geim, S. V. Morozov, E. H. Hill, P. Blake, M. I. Katsnelson and K. S. Novoselov,
“Detection of individual gas molecules adsorbed on graphene”, Nature Mat. 6 (2007) 652-655.
5. F. Yavari, E. Castillo, H. Gullapalli, P. M. Ajayan, and N. Koratkar, “High sensitivity detection of NO2
and NH3 in air using chemical vapor deposition grown graphene”, Appl. Phys. Lett. 100 (2012) 203120.
6. W. Yuan, and G. Shi, “Graphene-based gas sensors”, J. Mater. Chem. A, 1 (2013) 10078-10091.
7. I. Iezhokin, P. Offermans, S. H. Brongersma, A. J. M. Giesbers, and C. F. J. Flipse, “High sensitive quasi freestanding epitaxial graphene gas sensor on 6H-SiC”, Appl. Phys. Lett. 103 (2012) 053514.
8. J. D. Fowler, M. J. Allen, V. C. Tung, Y. Yang, R. B. Kaner, and B. H. Weiller, “Practical chemical
sensors from chemically derived graphene”, Acs Nano 3 (2009) 301-3.
9. G. Chen, T. M. Paronyan, and A. R. Harutyunyan, “Sub-ppt gas detection with pristine graphene”, Appl.
Phys. Lett. 101 (2012) 053119.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
DEVELOPING COMPUTATIONAL INTELLIGENCE TECHNIQUES FOR DISTRIBUTED AND MOBILE AIR QUALITY MONITORING
S. De Vito1, E. Massera1, G. Fattoruso1, G. Di Francia1 1UTTP-MDB Department, ENEA Italian Agency for New Technologies, Energy and
Sustainable Economic Development,C.R. Portici, P.le E. Fermi,1, 80055 Portici (NA) Italy [email protected]
Abstract Air quality smart multisensors device are thought to be the major solution to improve spatio temporal density of the air quality monitoring network of our cities. Their development is also thought to be a major enabler for several other application like air pollution personal exposure monitoring, heavily distributed olfactive nuisance monitoring and source declaration, smoldering and illegal fires detection, etc. Unfortunately most of the sensing device they rely on suffers from trade offs arising among several requirements like specificity, sensibility and stability. This issue has been found to apply constantly over the years, unrespective of the technology (MOX, EC, etc.) that is at the base of their transduction mechanism. Another major issue is represented by lack of repeatability in fabrication. This is often neglected but of course it represent a source of significant costs for the commercialization of calibrated multisensory device since basically, every device is then characterized by a slightly different calibration curve. Together, all these factors account for each multisensor device to be a unique device causing strong difficulties in the calibration of large number of multisensory devices. Our group is involved, since many years, in the investigation of the possible roles of computational intelligence techniques in the development of autonomous, intelligent multisensory devices for massively distributed air quality monitoring applications. In the last decade we have successfully developed machine learning techniques for on-field calibration of gas multisensory devices testing this methodology with significant data streams [1]. In this approach, the multisensory device is collocated with a stationary conventional multi gas analyser in order to compare its response to the response of the conventional analyser. A multivariate calibration based on ANN and SVM models has been applied to allow for cross interference effects reduction on the concentration estimation. Optimal length of the calibration dataset has been studied with 10 days seeming to provide adequate coverage for weekly cyclostationarity of the pollution process. A step further have allowed to embed the developed computational intelligence on-board of a smart device for sensor censoring and energy saving by avoiding unnecessary transmissions. This may provide an interesting solution for distributed safety monitoring scenarios, mobile systems and personal exposure assessment device [2][4]. More recently, we have tackled the concept drift related issue by developing a Semi-supervised learning techniques that has shown capable to reduce the effect of the environmental variations over a one year long dataset produced with a Pirelli prototype multisensory device [3]. Currently we are testing the same methodology on further datasets. As a secondary but not less interesting benefit, we have obtained the possibility to significantly reduce to 24hrs the dimension of on field data to be recorded for supervised training, allowing the algorithm to learn weekly obscillations by unsupervised samples. However, the drift negative effects have only been reduced and beside the basic idea have shown to work further development are needed. At the moment we are facing Calibration transfer issue in order to cope with the sensor characteristics variation issue that appear to be still mainly open and to be very significant for the envisaged heavily distributed and pervasive monitoring scenarios [5]. In our communication we will stress how
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Oral Presentation
our experience have thought us about the use of computational intelligence techniques in this scenarios. It emerges that this techniques can play a major role in the development of next generation air quality monitoring devices. However, a major drawback for the development of an adequate comparison of multiple techniques is the lack of an adequately large set of shared datasets upon which to test the developed methodologies. This issue has, in our opinion, hampered the speed of new developments in this field, as such we believe that the availability of new datasets may allow for a more thoroughly and significant assessment of the potential of computational intelligence techniques in our field.
References [1] S De Vito, et al., CO, NO2 and NOx urban pollution monitoring with on-field calibrated electronic nose by
automatic bayesian regularization, Sensors and Actuators B: Chemical 143 (1), 182-191. [2] S De Vito et al., Wireless Sensor Networks for Distributed Chemical Sensing: Addressing Power
Consumption Limits With On-Board Intelligence,Sensors Journal, IEEE 11 (4), 947-955. [3] S. De Vito et al., Semi-Supervised Learning Techniques in Artificial Olfaction: A Novel Approach to
Classification Problems and Drift Counteraction, Sensors journal, IEEE, 12(11),3215-3224. [4] Capezzuto et al., MONICA: A maker friendly mobile and social sensing approach to urban air quality
monitoring, manuscript submitted to Urban Climate, Elsevier, special issue on EUNetAir COST Action EEA meeting.
[5] Tim Watkins, The US EPA Roadmap for Next Generation Air Monitoring, EuNetAir second scientific meeting, Queens College, Cambridge, 18-20 Dec., 2013.
COST Action TD1105 EuNetAir
2nd
International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
ABSTRACTS OF
POSTER PRESENTATIONS
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Poster Presentation
ELECTROPHORETIC GOLD NANOPARTICLES DEPOSTION ON
CARBON NANOTUBES FOR NO2 SENSORS
Elena Dilonardo1, Michele Penza
2, Marco Alvisi
2, Domenico Suriano
2, Riccardo Rossi
2,
Cinzia di Franco3, Francesco Palmisano
1, Luisa Torsi
1, Nicola Cioffi
1
1Department of Chemistry, Università degli Studi di Bari ‘Aldo Moro’, Via E. Orabona 4 -
70126, Bari (BA), ITALY;[email protected] 2ENEA, Italian National Agency for New Technologies, Energy and Sustainable Economic
Development Technical Unit for Materials Technologies - Brindisi Research Center, PO Box
51 Br4; I-72100 Brindisi (BR), ITALY. 3CNR-IFN LIT3, Dip. Interuniversitario Fisica “M. Merlin” Università degli Studi Di Bari
‘Aldo Moro’ Via Amendola, 173 - 70126 Bari (BA), ITALY.
Carbon nanotubes (CNTs) have attracted considerable attention as gas sensing materials
because of a number of exceptional properties, which include a high aspect ratio, and
excellent chemical and environmental stability. These properties make them ideal candidates
for detecting gases [1]. CNTs have the ability to detect individual reactions when a gas
molecule attaches or detaches from their surface. The adsorbed/desorbed gas molecules can
change the carrier (hole, electron) density in CNTs, which results in a change in resistance of
CNTs. In addition, the electronic properties of CNTs change remarkably when exposed to a
target gas, inspiring the basic principle for the application of CNTs to gas sensors [1]. Recent
studies have shown that the addition of metal or metal oxides to CNTs dramatically increases
the sensitivity of the gas sensor. Metal or metal oxide nanoparticles have superior physico-
chemical properties, such as high activity with gas molecules, good adsorption/desorption
capacity and efficient charge transfer [2]. Therefore, the addition of metal or metal oxides can
give a CNT-gas sensor a full range of reactivity towards different gases [3]. In particular,
nanoparticles can provide a continuous pathway for moving carriers, between CNTs, where
sensitivity can be improved by the presence of both the nanoparticle surface and the charge
transfers between the CNTs and nanoparticles induced by gas adsorption/desorption [4].
Metal nanoparticles were coated on the CNT surface, leading to the successful approach [3].
In the present study, the impact of the tailored load of gold nanoparticles (Au NPs)
functionalizing the sidewalls of CNTs networks on NO2 gas sensing performance of a
resistive gas sensor, operating at a working temperature in the range of 100-200°C, was
investigated. CNTs films have been deposited on alumina substrate by radiofrequency plasma
enhanced chemical vapour deposition (RF PECVD) technology [5]. Considering the recent
interest in the use of CNTs from both an electrochemical point of view and as metal
nanoparticle catalyst supports, it is somewhat surprising to find so few examples of
electrochemically controlled metal nanoparticle deposition on CNTs in the literature [6].
Figure 1. A) SEM and B) TEM images of electro-decorated CNTs with Au NPs.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Poster Presentation
In this study an electrophoretic deposition of Au NPs on CNTs has been performed to modify
CNTs surface to improve the sensitivity and selectivity for NOs gas detection up to sub-ppm
level. SEM and TEM images in Figure 1 revealed the presence of nanoscale gold and its
successful deposition on CNTs. Au NPs/CNTs hybrid system exhibited a p-type response
with a decrease in electrical resistance upon exposure to oxidizing NO2 gas, as reported in
Figure 2, and an increase in resistance upon exposure to reducing gases like CO. An optimal
Au NPs loading and operating temperature for Au NPs modified CNTs-sensor exposed to
NO2 gas has been recorded.
Figure 2. Resistance change of CNTs and Au-decorated CNTs at different NO2 concentration at operating
temperature of 150°C.
References 1. Y.X. Liang, Y.J. Chen, T.H. Wang, “Low-resistance gas sensors fabricated from multiwalled carbon
nanotubes coated with a thin tin oxide layer”, Appl. Phys. Lett. 85 (2004) 666.
2. O.K. Varghese, P.D. Kichambre, D. Gong, K.G. Ong, E.C. Dickey, C.A. Grimes, “Gas sensing characteristics of multi-wall carbon nanotubes”, Sens. Actuators B 81 (2001) 32.
3. R. Leghriba, R. Pavelkoa, A. Feltenb, A. Vasilieva, C.C.,I. Gràciac, J.-J. Pireauxb, E. Llobeta, “Gas
sensors based on multiwall carbon nanotubes decorated with tin oxide nanoclusters”, Sens. Actuators B
145 (2010) 411.
4. J. Kong, M.G. Chapline, H. Dai, “Functionalized Carbon Nanotubes for Molecular Hydrogen Sensors”,
Adv. Mater. 13 (2001) 1384.
5. M. Penza, R. Rossi, M. Alvisi, G. Cassano, E. Serra, “Functional characterization of carbon nanotube
networked films functionalized with tuned loading of Au nanoclusters for gas sensing applications”, Sens.
Actuators B 140 (2009) 176.
6. G.G. Wildgoose, C.E. Banks, R.G. Compton, “Metal Nanoparticles and Related Materials Supported on
Carbon Nanotubes: Methods and Applications”, Small 2 (2006) 182.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Poster Presentation
Pd-Doped ZnO Nanorods for VOCs Sensing
S. Ozturk1, Z. A. Kosemen
1, A. Kosemen
1,2, N. Kilinc
1, Z. Z. Ozturk
1, D. Suriano
3, M. Alvisi
3,
and M. Penza3
1Department of Physics, Gebze Institute of Technology, 41400,Gebze-Kocaeli,
Turkey;[email protected] 2 Department of Physics, Mus Alparslan University, 49100 Mus, Turkey; Email
3 Brindisi Technical Unit of Technologies for Materials, Italian National Agency for New
Technologies, Energy and Sustainable Economic Development, Brindisi, Italy
Abstract
In this study, gas sensors were fabricated on quartz crystal microbalance with coating of
ZnO and palladium doped ZnO nanorods for volatile organic compounds (VOCs) at room
temperature. Vertically aligned doped and undoped ZnO nanorods were synthesized on each
sides of QCM by using solution based process. The diameters and length of doped and
undoped ZnO nanorods were 100 nm and 600 nm, respectively. Sensor responses of samples
were enhanced with increasing of Pd doping concentrations and samples were more sensitive
to ethanol vapour than methanol vapour even at low concentration of ethanol.
Semiconducting metal oxide materials have good thermal stability, mechanical and chemical
durability even at harsh environment. Thin and thick film and nanostructures of
semiconducting metal oxide materials as zinc oxide, tin oxide, tungsten oxide, etc. have been
used in gas sensors as sensitive. Among these structures nanomaterials have present high
surface to volume ratio and higher surface areas of sensitive layer. With increasing of the
surface area, sensing properties of gas sensors can be improved which have been presented by
research groups [1]. In generally, most of semiconducting metal oxide based sensor
applications, changing in the electrical properties of semiconduting metal oxide materials
(conductance, resistance and capacitance) are used for detecting of gas species. Electrical
properties of these materials can easily be altered depends on changing gas concentration of
surrounding ambient especially at elevated temperatures depends on chemical reactions
between target gas species and sensitive layers [2-3]. ZnO is a n-type semiconducting
materials with wide and direct band gap. Comparing to other metal oxide materials, ZnO has
many disadvantages, low selectivity and sensitivity and high operation temperature on the
other hand advantages are fabrication of nanostructured forms are easier and its selectivity
and sensitivity can be modified with doping of catalyst materials [2-4]. Doped and undoped
ZnO nanorods were fabricated on gold electrode coated QCM transducers by solution based
method [5]. The resonance frequency of QCM transducers was 10 MHz. Doping
concentration of Pd in ZnO nanorods were arranged with varying of the composition of
solution used in electrochemical deposition process. Pd doping concentrations in ZnO
nanorods was 0.02%, 0.5%, 1.5% and 2.5%. Fabricated ZnO nanorods have 100 nm in
diameters. Scanning electron microscope images of ZnO nanorods were given in figure 1.
Figure 1. SEM images of ZnO nanorods.
COST Action TD1105 EuNetAir
2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014 Poster Presentation
Fabricated samples were tested to VOCs in dry air ambient at room temperatures. Ethanol,
methanol, ethylacetate were chosen as analytes. The test concentrations were 120 ppm - 12
ppm for ethanol, 240 ppm - 24 ppm for methanol and 500 ppm - 50 ppm for ethyl acetate.
Sensor responses increased with increasing of Pd doping concentrations. The sensors
responses of 2.5% Pd doped doped and undoped of ZnO nanorods to ethanol vapour as
function of a time were given in figure 2a and sensor responses of 2.5% Pd doped ZnO
nanorods for selected analytes as a function of concentration were given in figure 2b.
a) b)
Figure 2. a) Sensor responses of 2.5% Pd doped and undoped ZnO nanorods to ethanol vapor, b) Sensor
responses to selected analytes (in dry air) as a function of concentration.
As a conclusion, fabricated samples were more sensitive to ethanol vapour than other two
types of volatile organic compounds and sensitivity of ZnO nanorods increased depends on
Pd concentration in nanostructures.
Acknowledgement:
This study was partly supported by The Scientific and Technological Research Council of
Turkey. Project title: “Development of Automotive Gas Sensors Based on Nano-Metal-Oxide
Semiconductor with increased Selectivity, Sensitivity and Stability” and project number
“111M261” and supported by COST Action TD1105 EuNetAir - European Network on New
Sensing Technologies for Air-Pollution Control and Environmental Sustainability - by a Short
Term Scientific Mission Year-2 (STSM-TD1105-16434, period from 03-03-2014 to 28-03-
2014): “Functionalization of ZnO Nanorods With Metals and Metal Oxides For Gas Sensing
Applications”.
References 1. G. Shen, P.-C. Chen, K. Ryu and C. Zhou, “Devices and chemical sensing applications of metal oxide
nanowires”, Journal of Materials Chemistry 19 (2009) 828–839.
2. G. Eranna, B. C. Joshi, D. P. Runthala and R. P. Gupta, “Oxide Materials for Development of Integrated Gas
Sensors-A Comprehensive”, Critical Reviews in Solid State and Materials Sciences Review, 29 (2004) 111-
188.
3. N. V. Quy, V. A. Minh, N. V. Luan, V. N. Hung and N. V. Hieu, “Gas sensing properties at room
temperature of a quartz crystal microbalance coated with ZnO nanorods”, Sensors and Actuators B 153
(2011) 188–193.
4. Z. Pei, X. Ma, P. Ding, W. Zhang, Z. Luo and G. Li, “Study of a QCM dimethyl methylphosphonate sensor
based on a ZnO-Modified nanowire-structured manganese dioxide film”, Sensors 10 (2010) 8275-8290. 5. Y. Hames, Z. Alpaslan, A. Kosemen, S. E. San and Y. Yerli, “Electrochemically grown ZnO nanorods for
hybrid solar cell applications”, Solar Energy 84 (2010) 426–431.
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Poster Presentation
ZnO NANORODS FOR GAS SENSORS
R. YatskivSynthesis and characterization of nanomaterials, Institute of Photonics and Electronics AVCR,
Chaberska 57 18251 Czech Republic, Prague; [email protected]
, M. Verde, J. Grym
Abstract In recent years applications of nanostructured ZnO, particulary nanorods, in gas sensors, dye sensitized solar cells, field effect transistors have attracted increasing interest [1-3]. One-dimensional nanowires and nanorods (NRs) can be grown from gaseous phase or by wet chemical methods [4]. The gas-phase methods require relatively high growth temperature, expensive equipment and source materials. The wet chemical methods have several advantages as compared with gas-phase methods. They are inexpensive, less hazardous, the growth takes place at lower temperature, the morphology can be easily controlled and large areas of a wide variety of substrates can be homogeneously covered [5]. In this work ZnO NRs were synthesized by hydrothermal method from aqueous solution of zinc nitrate hexahydrate (Zn(NO3)2 .6H2O) and hexamethylenetetramine (HMT) at 95 °C [6]. Thermal degradation of HMT releases hydrozyl ions, which react with Zn2+ ions and form ZnO [7]. The scanning electron microscopy (SEM) image of the NRs prepared on hydrothermally grown seed layer is shown in Fig. 1.
Figure 1. SEM images of ZnO NRs. (a) - top view and
(b) – images taken at a 55° tilt. Figure 2. Cross section of graphite/ZnO NRs Schottky
diodes.
In our previous works we presented that highly rectifying and thermally stable Schottky contacts can be created by depositing colloidal graphite [8-10]. We apply this technique to create a Schottky contact on the layer of the ZnO NRs. Before the growth of ZnO NRs, a small portion of the seed layer was covered by a photoresist. The photoresist was then removed to create a Ga-In ohmic contact. As shown in Fig. 2, the layer of colloidal graphite consist of irregular flakes of sizes in the range of about 1 µm. The relatively big graphite flakes thus do not penetrate the area between the NRs and avoid potential short-circuiting. The graphite/ZnO NRs structures were tested for their sensitivity to hydrogen in the cell with a through-flow gas system. The effect of hydrogen exposure on the I-V characteristics of the graphite/ZnO NR Schottky diodes is shown in Fig. 3. The reverse current increases on exposure to hydrogen. It is known that oxygen molecules adsorbed on the surface extract electrons from the conduction band of ZnO to form O- and O2- anions. This process leads to
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Poster Presentation the formation of a depletion region with reduced carrier concentration near the sample surface. When exposed to hydrogen, chemisorbed oxygen species react with hydrogen, the extracted electrons are released to the conduction band, and resistivity is decreased [11].
Figure 3. (a) Current-voltage characteristics of the graphite/ZnO NRs Schottky diode. (a) in air, (b) under
exposure to 0.1% H2 in N2.
The work was supported by EU COST Action TD1105 – project LD14111 of the Ministry of Education CR.
References 1. H. T. Wang, B. S. Kang, F. Ren, L. C. Tien, P. W. Sadik, D. P. Norton, S. J. Pearton, J. Lin, “Hydrogen-
selective sensing at room temperature with ZnO nanorods”, Appl. Phys. Lett. 86 (2005) 243503. 2. M. Law, L.E. Greene, J. C. Johnson, R. Saykally, P. D. Yang, “Nanowire dye-sensitized solar cells”, Nat.
Mater. 4 (2005) 455-459. 3. S. H. Ko, I.Park, H. Pan, N. Misra, M. S. Roger, C. P. Grigoropoulos, A. P. Pisano, “ZnO nanowire
network transistor fabrication on a polymer substrate by low-temperature, all-inorganic nanoparticle solution process”, Appl. Phys. Lett. 92 (2008) 154102.
4. H. Morkoc and U. Ozgur 2009 “Zinc Oxide: Fundamentals, Materials and Device Technology” (Weinheim: Wiley) p 477
5. S. Xu, Z. L. Wang, “One-dimensional ZnO nanostructures: Solution growth and functional properties” Nano Res. 4 (2011) 1012-1098.
6. L. Vayssieres, “Growth of Arrayed Nanorods and Nanowires of ZnO from Aqueous Solutions” Adv. Mater. 15 (2003) 464-466
7. L. Schmidt-Mende, J. L. MacManus-Driscoll , “ZnO – nanostructures, defects, and devices”, Mater. Today 10 (2007) 40-48
8. R. Yatskiv, J. Grym, “Temperature-dependent properties of semimetal graphite-ZnO schottky diodes”, Appl. Phys. Lett. 101 (2012) 162106.
9. R. Yatskiv, J. Grym, K. Zdansky, K. Piksova, “Semimetal graphite/ZnO Schottky diodes and their use for hydrogen sensing”, Carbon 50 (2012) 3928–3933.
10. R. Yatskiv, J. Grym, “Thermal stability study of semimetal graphite n-InP and n-GaN Schottky diodes”, Semicond. Sci. Technol. 28 (2013) 055009.
11. G. Heiland and P. Kunstman, “Homogeneous semiconducting gas sensors” Sens. Actuator 2(1982) 343-361.
-3 -2 -1 0 1 2 3
10-8
10-7
10-6
10-5
10-4
(a) (b)
Cur
rent
(A)
Voltage (V)
296K
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Poster Presentation
NANOSTRUCTURED SCHOTTKY CONTACTS FOR GAS SENSORS
J. GrymSynthesis and characterization of nanomaterials, Institute of Photonics and Electronics AVCR,
Chaberska 57 18251 Czech Republic, Prague; [email protected]
, R. Yatskiv, O. Cernohorsky, M. Verde
Abstract Hydrogen gas has been widely used in chemical industry, medicine, or hydrogen-fuelled vehicles. However, hydrogen is volatile and extremely flammable. A small leakage of high concentration of hydrogen-containing gases can cause explosion. Development of hydrogen sensor with high sensitivity, short response time, small size and low cost is in great demand. In recent years, there were many attempts to apply metal/InP structures in hydrogen sensors. Conventional metal deposition techniques resulted in poor quality metal interfaces and low sensitivity [1]. Substantial improvement of the interface quality, and consequently of the sensing properties, was achieved by using electrochemical techniques for the deposition of the catalytic metal [2, 3]. Further improvement in sensing properties can be achieved by reducing the metal grain size. The electrophoretic deposition (EPD) is appropriate for the fabrication of the nanostructured Schottky contacts by the deposition of a catalytic metal in the form of nanoparticles (NPs). We compare sensing properties of Schottky diodes created by (a) EPD of a thick layer (~100nm) of Pt NPs on InP substrate (Fig 1a); and by inserting a submonolayer of Pt NPs between the graphite and InP substrate (Fig. 1b). Pt NPs with the average diameter of 5 nm dispersed in isooctane solution were prepared by the reverse micelle technique [4]. Sensor elements prepared in this way are capable of detecting of low concentrations (about 1ppm) of hydrogen at room temperature [5-7].
Figure 1. Schematic cross-section of (a) Pt NPs/InP and (b) graphite- Pt NPs/InP Schottky diodes. SEM images
of (c) submonolayer and (d) thick layer Pt NPs deposited on a semiconductor substrate by EPD. Current voltage and current-transient characteristics for both structures are presented in Fig. 2. It is known that molecules of hydrogen adsorb onto the surface of the catalytic metal (Pd,Pt) and dissociate into hydrogen atoms. Hydrogen absorption can affect different properties of this metal such as the work function, conductivity, lattice constant and optical properties [8]. The sensing properties can be explained by the diffusion of hydrogen atoms through the metal film and their absorption at the metal–semiconductor interface. Hydrogen absorption leads to the formation of the dipole layer, which changes the SBH and results in the increase of both forward and reverse current [9].
COST Action TD1105 EuNetAir 2nd International Workshop EuNetAir, Brindisi (Italy), 25-26 March 2014
Poster Presentation
Figure 2. Comparison of current–voltage (i) and current transient measured at -0.1V (ii) characteristics of the (a)
graphite-Pt NPs/InP and (b) Pt NPs/InP Schottky diode.
The work was supported by EU COST Action TD1105 – project LD14111 of the Ministry of Education CR.
References 1. M. Yousuf, B Kuliyev, B. Lalevic, T. L. Poteat, “Pd InP Schottky diode hydrogen sensors”, Solid-State
Electron. 25 (1982) 735-8. 2. T. Sato, S. Uno, T. Hashizume, H. Hasegawa, “Large Schottky Barrier Heights on Indium Phosphide-
Based Materials Realized by In-Situ Electrochemical Process”, Japan. J. Appl. Phys. 36 (1997) 1811-7. 3. H. I. Chen, Y. I. Chou, C. Y. Chu, “A novel high-sensitive Pd/InP hydrogen sensor fabricated by
electroless plating” Sensors Actuator B B: Chemical 85 (2002)10-18. 4. D. H. Chen, J. J. Yeh, T. C. Huang, “Synthesis of Platinum Ultrafine Particles in AOT Reverse Micelles”,
J. Colloid Interface Sci. 215 (1999) 159-166. 5. R. Yatskiv, J. Grym, V.V. Brus, O. Cernohorsky, P.D. Maryanchuk, C.Bazioti, G. Dimitrakopulos, Ph.
Komninou, “Transport properties of metal-semiconductor junctions on n-type InP prepared by electrophoretic deposition of Pt nanoparticles”. Semicond. Sci. Technol. (in print)
6. R. Yatskiv, J. Grym, K. Zdansky, K. Piksova, “Semimetal graphite/ZnO Schottky diodes and their use for hydrogen sensing”, Carbon 50 (2012) 3928–3933.
7. K. Zdansky, R. Yatskiv, “Schottky bariers on InP and GaN made by deposition of colloidal graphite and Pd, Pt or bimetal Pd/Pt nanoparticles for H2-gasdetection”, Sensors and Actuators B: Chemical 169 (2012) 104-109.
8. T. Hubert, L. Boon-Brett, G. Black, U. Banach, “Hydrogen sensors – A review”, Sensors and Actuators B: Chemical 157 (2011) 329-352.
9. I. Lundstrom , M. S. Shivaraman, S. Svensson, S. Lundkvist S, “A hydrogen−sensitive MOS field−effect transistor” J. Appl. Phys. Lett. 26 (1975) 55-7.
-1,5 -1,0 -0,5 0,0 0,5 1,0 1,510-1210-1110-1010-910-810-710-610-510-410-310-210-1
(a) (b)
Curre
nt (A
)
Voltage (V)
(i)
0 200 400 600 800 1000 120010-12
10-11
10-10
10-9
10-8
10-7
10-6
10-5
10-4
10-3
0,1% H2 in N2
(a) (b)
air
Curre
nt (A
)
Time (s)
air
0,1% H2 in N2 (ii)