Embed Size (px)
Citation preview
Bolt R
emov
er Ran
ge
Fractio
nal
FEATURES AND BENEFITS • Centering carbide bur system
Maximizing the potential of drilling threads on center
• Extracting of broken bolt thread Reducing damage to existing threaded holes
• Guided steps to accomplish required outcome Saving the threads and the component
• CNC machined High consistent quality
Ordering Information For more information and/or to place an order, please contact ATA Customer Service at: US Offices: +1 330 928 7744 or by email [email protected] Offices: +353 (0) 49 432 6178 or by email [email protected]
BOLT REMOVER
A range of burs designed for the preparation and removal of broken studs
DESIGN FEATURES• Engineered range developed for the removal of
broken bolts• Specific diameter and cutting lengths to suit various
thread diameters• Developed cutting geometry to grind case hardened
threads
RANGE DETAILS• Range offering to suit various thread diameters
Five diameters of plain cylinder with end cut• Five diameters of 150° countersinks• Four diameters of solid carbide drills • Operations 1 & 2 available in 5pcs sets
INDUSTRY TARGETS• Automotive repair shops• Maintenance departments
Bur Head ø Maximum Operating Speed
≤ 1/4” 55,000 rpm
≤ 5/16” 45,000 rpm
≤ 3/8” 37,500 rpm
≤ 1/2” 28,000 rpm
Maximum Operating Speed
Bolt Size Bur Head øOperation 1 & 2
Drill øOperation 3
1/4-20, 24, 28 1/4” 1/8”
5/16-18, 24, 32 5/16” 1/8”
3/8-16, 24 3/8” 3/16”
7/16-14, 20 7/16” 15/64”
1/2-13, 20 1/2” 5/16”
Selecting the correct size
Maximum operating speeds are based on standard shank length of 1-3/4”,
max overhang of 3/8”
See Bolt Removerin action
youtube.com/c/ATAToolsLtd
BOLT REMOVER
5 Piece Bolt Remover Cylinder with End Cut Set 19555
EDP no. Bolt Size Head Length Shank Diameter Overall Length 19550 1/4-20, 24, 28 3/4” 1/4” 2”
19551 5/16-18, 24 ,32 3/16” 1/4” 2”
19552 3/8-16, 24 3/4” 1/4” 2-1/2”
19553 7/16-14, 20 3/4” 1/4” 2-1/2”
19554 1/2-13, 20 1” 1/4” 2-3/4”
Plain Cylinder with End-Cut only
Wear Eye Protection!
Wear Hearing Protection!
Observe the recommendedrotational speed, especially whenusing burs with long shanks!
Wear Protective Gloves
Wear Protective Mask
BOLT R
EMO
VER
BOLT REMOVER
Operation 1Grind the broken surface flat• Choose the correct size carbide bur for the broken bolt• Use a right-angle die grinder• Ensure the bur is perpendicular to the broken bolt• Grind the broken surface flat
EDP No. 19554
EDP No. 19555Description 5 pc Bolt Remover - Imperial Cylinder SetContents 19550, 19551, 19552, 19553, 19554
EDP No. 19553
EDP No. 19552
EDP No. 19551
EDP No. 19550
EDP no. Bolt Size Head Length Shank Diameter Overall Length 19560 1/4-20, 24, 28 3/4” 1/4” 2”
19561 5/16-18, 24, 32 3/16” 1/4” 2”
19562 3/8-16, 24 3/16” 1/4” 2”
19563 7/16-14, 20 3/16” 1/4” 2”
19564 1/2-13, 20 3/16” 1/4” 2”
BOLT REMOVER
Countersink 150°
Ordering Information For more information and / or to place an order, please contact ATA Customer Service at: US Offices: +1 330 928 7744 or by email [email protected] Offices: +353 (0) 49 432 6178 or by email [email protected]
5 Piece Bolt Remover Countersink Set 150o 19565 EDP No. 19565Description 5 pc Bolt Remover - Imperial Countersink SetContents 19560, 19561, 19562, 19563, 19564
EDP No. 19564
EDP No. 19563
EDP No. 19562
EDP No. 19561
EDP No. 19560
Operation 2Form a countersink location at the centerpoint of the bolt• Choose the correct size carbide countersink bur for the broken bolt• Use a right-angle die grinder• Ensure the bur is perpendicular to the broken bolt• Grind into the prepared surface to form a countersink location at the center point of the bolt
Wear Eye Protection!
Wear Hearing Protection!
Observe the recommendedrotational speed, especially whenusing burs with long shanks!
Wear Protective Gloves
Wear Protective Mask
BOLT R
EMO
VER
BOLT REMOVER
Operation 3Drill into the previously ground countersink location• Choose the correct size carbide drill• Use a right-handed die grinder• Ensure the bur is perpendicular to the broken bolt• Drill into the countersink location at the center point of the original bolt• All drills are supplied on parallel shank
BOLT REMOVER
EDP no. Diameter Flute Length Overall Length Inclusive Angle56108 1/8” 7/8” 1-7/8” 140°
56112 3/16” 1-1/8” 2-3/16” 140°
56115 15/64” 1-5/16” 2-7/16” 140°
56120 5/16” 1-5/8” 2-13/16” 140°
Carbide Drill
EDP No. 56120
EDP No. 56115
EDP No. 56112
EDP No. 56108
/IN.SP.BR.US.09.19
t: +353 (0) 49 432 6178 e: [email protected]: +353 (0) 49 432 6298 w: www.atagroup.co
ATA Tools Ltd., IDA Business & Technology Park, Killygarry, Cavan, Co. Cavan, H12 DK46, Ireland
International Offices
t: +1 330-928-7744 e: [email protected] f: +1 330-849-2977 w: www.atagroup.co
ATA Tools Inc., 7 Ascot Parkway,Akron, Ohio 44223, USA
US Offices
114538_ATA_BusCard.indd 4 05/03/2014 13:39
