BodyShop2014 CNE Low

www.snapon.com 1 Limited quantities. Participating Franchisees only. Offer expires March 31, 2014. Offer cannot be combined with any other trade in or discount. Limited quantities. Participating Franchisees only. Offer expires March 31, 2014. Offer cannot be combined with any other trade in or discount.

2014 CATALOG

Offer expires March 31, 2014Limited Quantities.

BODY SHOPMAKE LIFE IN THE BAY MORE EFFICIENT AND PRODUCTIVE

INNOVATIVE TOOLS AND EQUIPMENT

2014 Catalog2 Limited quantities. Participating Franchisees only. Offer expires March 31, 2014. Offer cannot be combined with any other trade in or discount.

HAND TOOLS

• Solid rubber head is 3 ¾" L & 2 ¼" D with 11" hardwood handle

• Ideal for replacing hubcaps, bodywork, etc.

• The striking end on Snap-on® punches and chisels are machined to a modified parabolic curve for slow metal displacement

• Reduces mushrooming,

chipping and splitting

PPC710BK $220.20 $198.15 10pc Punch & Chisel Set

BF710B $100.85 $90.75Steel Toe Dolly • For dinging flat surfaces

• 4 ¾" x 2 ¼" x 11/16", 2 ½ lb.

BF711B $104.80 $94.30Steel Heel Dolly • For use in sharp

corners and wide radii

• 3" x 2 ¼" x 1 3/8", 2 ¼ lb.

2007BFB $615.85 $554.257pc Body Hammer Set• 7 of the most common tools necessary for professional body work are included in this set:

BF716B Spoon; BF608B, BF611B, and BF617B Body Hammers; and BF710B, BF711B, and BF712B Dollies

SPDC18R $93.95 $84.55 Demolition Chisel• Exclusive crown handle offers

protection from off-center hammer strikes and a comfortable, secure grip

• ¾" square bar with precision ground flared tip, manufactured from special alloy steel, forged and heat-treated for optimum strength and durability

BF620C $27.70 $24.95Rubber Mallet

BF632B $112.95 $101.65Door Panel Fiberglass Body Hammer

• For door and body panel bumping

• Smaller diameter head is offset 45°

BF635 $115.95 $104.35Door Skin Hammer• Use for door skin

replacement

• Narrow, rectangular faces work in tight flange area

• Fiberglass handle offers balance and strength

BF603B $82.70 $74.45Long Spot Pick Hammer• For bumping when filing or

where metal is covered with soundproofing material

BF608B $80.45 $72.40Short Curve Cross Peen Hammer• Use under fenders with rolled

edges and finishing face for dinging

BF611B $76.65 $68.95Picking and Dinging Hammer• Smooths small dents

and for general dinging

BF603B

BF608B

BF611B

Blue-Point® 4pc Hammer Set• Hickory handle set includes 8,

12, 16 and 24 oz. hammers

BP1004S $114.00 $102.60

BF716B $38.00 $34.20 Light Dinging Spoon• Smooths and levels ridges

HBPT16 $66.95 $60.2516 oz. Plastic Tipped Dead Blow Hammer

HBPT24 $75.45 $67.9024 oz. Plastic Tip Dead Blow Hammer• Plastic tip hammers used where metal to metal

scratching or marring needs to be eliminated

• Tip surface yields when an object is struck

• Ribbed, textured grip with energy absorbing microcellular material enhances comfort and reduces vibration

• Non-sparking, chemical resistant urethane covering

• Multi-position hand grip allows user to "choke up" in tighter work areas

• Wide flare at end of handle helps prevent slipping


• Unique selection of tip profiles for numerous prying, scraping, aligning, cutting and shielding applications

• Tough glass-reinforced nylon will not damage automotive interior components or painted surfaces

• Features a block end that allows use with a hammer

PSN500 $41.95 $37.75 5pc Non-Marring Pry Tools Set

PBN500 $41.95 $37.75 (not shown) 5pc Non-Marring Prybar Set

PKN500 $41.95 $37.75 (not shown) 5pc Non-Marring Scraper Set

SPBS704R (Red) SPBS704O (Orange-not shown) SPBS704G (Green-not shown)$199.95 $179.95 each 4pc Striking Prybar Set• High-leverage design with smooth radius head provides maximum

lifting and pulling force

• Blade extends through ergonomic handle to provide solid striking surface

• Manufactured from special alloy steel, precision forged and heat-treated for optimum strength and durability

• Rolling head acts as fulcrum and provides leverage while the pointed end is useful in many aligning applications

• Intended for light prying and spreading/smoothing epoxy, adhesives and silicone uniformly

• Includes: PPN1030, PPN2040 and PPN4050 in vinyl carrying case (not shown)

4pc Miniature Pick Set

SGASA204A $47.60 $42.85• Use for scribing, alignment, O-ring removal,

piercing holes in leather or fabric and cleaning nooks and crannies

• Soft grip handles provide increased comfort and control while resisting most shop solvents

• Packaged in storage tray (not shown)

PPN300 $16.05 $14.45 3pc Smoothing/Prying Tools Set

SPBH54R (Red),SPBH54G (Green) & SPBH54O (Orange)$198.25 $178.45 each 54" Crown Handle Striking Prybar• Cylindrical design with taper allows user to find a comfortable grip regardless of hand size

• ¾" square bar manufactured from special alloy steel, precision forged and heat treated for optimum strength and durability

• Exclusive crown handle offers protection from off-center hammer strikes

• Handle is 10 D/i" L for control

PBS704 $253.35 $227.95 4pc Prybar Set

BF603B $82.70 $74.45Long Spot Pick Hammer• For bumping when filing or

where metal is covered with soundproofing material

BF608B $80.45 $72.40Short Curve Cross Peen Hammer• Use under fenders with rolled

edges and finishing face for dinging

BF611B $76.65 $68.95Picking and Dinging Hammer• Smooths small dents

and for general dinging

HAND TOOLS

• Use for scribing, alignment, O-ring removal, piercing holes in leather or fabric and cleaning nooks and crannies

• Soft grip handles provide increased comfort and control while resisting most shop solvents

• Packaged in storage tray (not shown)

SGLASA204 $53.40 $48.05 4pc Long Pick Set


HAND TOOLS

A159 $38.95 $35.05 Door Tool• For most GM®

vehicles & trucks & some Ford vehicles

ASG103BR $101.65 $91.50 3pc Instinct® Trim Pad Tool Set• Remove fasteners that secure door

panels and trim pieces without damage to panel or trim

RRT105 $65.05 $58.55 6pc Car Stereo Removal Kit• For Audi®, BMW®, Ford®, Mazda®, VW®,

Land Rover®, Lincoln®, Saab®, Porsche®, Mercedes-Benz, Mercury® & Merkur®

vehicles

AWSGTRP20 $18.55 $16.70 Mirror Tool for Mercedes® Vehicles• Extra long length of 10 ½" and T20

Tamper Proof TORX® configuration is specifically designed to access Mercedes-Benz® vehicle mirrors

• Short end is also a T20 Tamper Proof TORX configuration for use in tight quarters

Puller Set and Small Slide Hammer• Remove bushings, seals, sleeves, bearings, bearing races, bronze and oilite

bushings and pressed-in studs

• Includes 2 sets of jaws, grease retainer adaptor, bearing hook, body dent puller, stud pulling head, and 2 lb. slide hammer

• Thread size is 3/8"-16"

CJ93B $369.95 $332.95

BM175 $175.90 Alignment Bar

• Use to align bumpers, window posts, wheel wells, panels, hoods, decks, and brackets

• 6', ¼" chain has hooks welded to each end for easy attachment to body components

• 4 ½" L, 1 ½" D tubing

ASGD102BR $69.60 $62.65 2pc Dished Tip Trim Pad Set• Smooth dish profile & wide gap to fit vehicles utilizing conical

x-mass style retainers for quick removal without damage

A177AO $39.60 $35.65 Trim Pad Remover• For GM and most imported vehicles.

Same design as A161B except for different applications

• 7 ½" L

A161BO $35.50 $31.95 Trim Pad Remover• For most GM, Ford and Chrysler®

vehicles and most imported vehicles

• Features a screwdriver type handle

• 7 ¾" L

BT20 $32.05 $28.85Brake Spring Tool for Toyota® Vehicles• Perfect tool for rear parking brake springs on Toyota vehicles

• Special tip is designed to engage the shoe hold down spring cup on Toyota vehicles

• Applications: The tip of this tool must fit through the access hole to engage the spring cup on 2000 to current Toyota Tacoma®, Tundra®, FJ Cruiser®, 4Runner®, Land Cruiser®, and Camry® vehicles

WBBS2 $5.05 $4.55 Small Brass Brush (1.)

WBSS2 $5.05 $4.55 Small Stainless Steel Brush (2.)

WBSS3 $13.50 3" Stainless Steel Brush (3.)

WBSS5 $15.50 5" Stainless Steel Brush (4.)• Heavy 28 gauge stainless gives units maximum strength and durability

3.

2.

4.

1.

• Designed to securely hold & maneuver small to medium size spring

• Deep “V-groove” tip and “C-groove” capture prevents spring from sliding off

• Thicker shank versus using picks

• Comfortable, durable acetate handle

SPRG625O 3/16" $20.95 $18.85SPRG618O ¼" $18.95 $17.05Push-Pull Spring Tools

A192 $11.45 $10.30 Windshield Wiper Arm Removal Tool• Designed to easily remove wiper arms on

most vehicles

• Provides wide and narrow prying ends

SPS2 $63.95 $57.55Universal Seal Puller Set • Small seal puller used for common

seal sizes and large seal puller used for larger seal sizes

• 2" & 4" pins for various seal diameter sizes with clearance requirements


HAND TOOLS

103ITMX $53.25 $47.953pc ¼" Impact Extension Set• Includes: ITMX20, ITMX40 and ITMX60 (2", 4", 6")

in storage tray (not shown)

• Set is an excellent accessory for the Snap-on CT525 ¼" drive Cordless Impact Wrench

• 1 ¾", 3", 6" and 11" extensions

• Snap-on® impact sockets are heat-treated to optimal hardness to add impact resistance and ductility

• Superior wall construction absorbs repeated impact cycling loads

• Includes storage tray (not shown)

204IMXA $95.95 $86.35 4pc 3⁄8" Dr. Impact Extension Set

103TMXKLA $159.25 $143.35 3pc ¼" Locking Extension Set• TMXKL60A thru TMXKL240A (6"-11"-24")

• Includes storage tray

BLPLLEXT203 $115.75 104.103pc D/i" Dr. Extra Long Locking Extension Set • Set includes 12", 18" and 24"

extensions in storage tray (not shown)

202IPFX $155.55 140.002pc D/i" Dr. Impact Swivel Extension Set• For those fasteners on a “hard to reach” angle!

• Includes 9" L, IPFX9 and 6" L, IPFX6

• Laser welded pivot pin allows smooth, full 30˚ swivel action for efficient power transfer

• Provides versatility for the technician as they can use any shallow, semi-deep, deep, 6pt, 12pt, metric or SAE impact socket–you are not limited to just 1 size

304IMX $168.60 $151.75 4pc ½" Dr. Impact Extension Set

• 3", 5 D/dc", 11 ¼" plus IP80D Universal Joint (Extensions IMX32B, IMX52 and IMX112)

• Includes storage tray (not shown)

2 Pc. Set of Extension ConnectorsFZ2 (D/i" Dr.) $45.95 TZ2 (¼" Dr.) $45.95• Female and male 90˚ connectors add versalility

to your extension, breaker bar, ratchet & crowfoot when accessing hard to reach fasteners

DPTM8¼" Dr. 10 pt. Metric Shallow Impact Socket, 8mm DPTM10¼" Dr. 10 pt. Metric Shallow Impact Socket, 10mm $15.95 $14.35 each

• Remove & install seat tracks on 2009 to current Honda Odyssey® and Pilot® vehicles with ease!

• Two fasteners on each track, 1 each 8mm and 10mm

S6810 $26.70 $24.0512 pt. Semi-Deep Metric Flip Socket, 8mm and 10mm • Double hex allows socket to engage single hex fastener every 30˚

rather than every 60˚, allowing for better access in restricted areas

• Overall Length 1.44"

• Longer length increases leverage to break free stubborn fasteners

• New head design for increased strength and durability

• Great for head bolts on heavy duty applications

SN36 $182.95 $164.6536" Breaker Bar

S9716KLMAG $75.95 $68.356pt. Magnetic Long Spark Plug Socket, 9/16" • Knurled surface for finger tightening/removal

• Magnetic retention for secure grip on spark plug in deep well cavity

• Magnetic design offers smooth release and won’t wear out

FLCE120 $12.70 $11.45Inverted TORX® Socket With Shallow Countersink• Remove/install fasteners that hold window

regulators in place for BMW® vehicles 5 & 7 Series

102STMML $82.70 $74.45¼" Dr. 2 Pc. Bumper Cover Socket Set• Long sockets handle the long thread

of bumper cover fasteners where deep sockets cannot

206AFX $164.00 $147.60 6pc D/i" Dr. Knurled Extension Set • (1 ½", 3", 4", 6", 8" & 11") FX1 thru FXK11

in a plastic tray (not shown)

• Chamfered drive ends for easy engagement

• Small diameter shank for maximum accessibility

• Cold formed for robust performance and made from a single piece of steel

• Knurled shaft provides fingertip control

106BTMX $113.90 $102.50 6pc ¼" Dr. Knurled Extension Set

• (1 ¼", 2", 4", 6", 8" and 11") in a storage tray (not shown)


HAND TOOLS SNAP-ON® INSTINCT ® SCREWDRIVERS• Instinct handles provide maximum turning power & greater comfort

• 6 specially designed curves and flutes provide fingertip control and aids in spinning

• Hexagon bolster prevents blade from being forced into the handle and provides wrench assisted turning power

• Tips are precision cut and vapor-blasted for the best possible grip and helps prevent chrome plating from peeling

• Replaceable blades are cold forged from special alloy steel and heat treated for optimum strength and durability

• Nickel/chrome plating helps protect against corrosion and promotes easy clean up

• Each set includes a plastic storage tray (not shown)

SGDTXL70BR $174.95 $157.457pc Instinct Soft Grip Torx® Long Screwdriver Set • 7 Torx tip

screwdrivers (T8-T30)

CTS561BITXL $53.95 $48.55 14pc 6"L Power Bit Set

• Set includes Torx bits T8, T10, T15, T20, T25, T27 and T30, Phillips bits #1, #2 and #3, Square drive #1 and #2, slotted and a 6" magnetic adaptor (not shown)

• High-quality indexable case with soft non-skid exterior

SDMEXT19K $135.95 $122.3519pc ¼" Hex Shank Adaptor And Bit Set• A perfect accessory kit for cordless, electric and

pneumatic drills and screwdrivers

• Includes the most popular sizes & lengths of extensions, adaptors & bits for most applications

• ¼" hex to ¼" or D/i" square drives hex-to-square adaptors for use with sockets (2" and 6" L)

• Magnetic bit holder for use with insert bits

• Includes 3 flat tip and 3 Phillips insert bits plus 3 Phillips and 3 Torx power bits

• Quick change coupler for use with ¼" hex power bits

• Comes in a blow molded storage case

SGDXL80BR $219.95 $197.95 8pc Instinct Combination Cabinet Screwdriver Set• Includes 4 Flat Tip screwdrivers and

4 Phillips® Tip screwdrivers

SGDX60BR $126.95 $114.256pc Instinct Combination Screwdriver Set

• 3 Flat Tip Drivers plus 3 Phillips Tip Drivers

SGDDP50BR $128.45 $115.605pc Instinct Soft Handle Screwdriver Set• 5 Phillips Diamond Tip screwdrivers


HAND TOOLS

ATECH2FR100B $549.95 $494.95

Electronic Flex-Head TECHANGLE D/i" Dr.

Torque Wrench (5-100 ft. lbs.)• 6 measurement modes

(ft-lbs, in-lbs, Nm, Kg-cm, dNm, angle)

• Fully programmable control panel that’s customizable to working environment, user preference, or both, the new 3⁄8" and ½" TECHANGLE® Torque Wrench completely eliminates the need for angle gauges and protractors

• Bright, dual progressive LEDs for better visibility from any angle

• Backlit LCD panel makes viewing in tight quarters and at odd angles easier than ever

• Over-molded non-slip handle resists temperature extremes and stands up to the toughest chemicals

• Protected end cap to prevent continuity loss

• 4 modes of feedback (LCD, Dual LED, audible, vibratory)

ATECH3FR250B $623.95 $561.55Electronic Flex-Head TECHANGLE ½" Dr. Torque Wrench (12.5-250 ft. lbs.)• 5 measurement modes

(ft-lbs, in-lbs, Nm, KGM, angle)

QD2R200 $327.95 $294.95D/i" Adjustable Click Type Torque Wrench (40-200 in. lb.) • Features an innovative design that provides consistently accurate readings and rugged, trouble-free performance

• Includes certificate of calibration

• Accurate to +/- 4% clockwise and +/- 6% counterclockwise from 20% of full scale to full scale

• High strength sealed ratchet head for long life

• Double hex (12-point) configuration allows socket to engage single hex fastener every 30˚ rather than every 60˚, allowing for better access in restricted areas

• Design features radius edges which will resist damage/nicks

• Center to center length on adaptor for easy torque calculations

• Larger sizes feature thicker construction for strength

208FRDH (Fractional) 208FRDHM (Metric-not shown)

8pc D/i" Dr. Torque Adaptor Sets$227.95 $205.15 each

SGDX60BR $126.95 $114.256pc Instinct Combination Screwdriver Set

• 3 Flat Tip Drivers plus 3 Phillips Tip Drivers

SGDDP50BR $128.45 $115.605pc Instinct Soft Handle Screwdriver Set• 5 Phillips Diamond Tip screwdrivers

TQFR100C $307.95 D/i" Dr. Adjustable Click Torque Wrench (20-100 ft. lbs.)

TQFR250E $372.95 $335.65 ½" Dr. Adjustable Click Torque Wrench (40-250 ft. lbs.)

• Accuracy within ±4% of any CW setting from 20% to 100% of full scale

• Thumb screw type adjustment setting is displayed in window

• “Split Beam” measuring elements provides accurate, reliable reading


POWER TOOLS

PHG1055K $240.60 $216.50 5pc Air Hammer Bit Set• 5 popular bits to cover a broad

range of applications

• Bright plating for greater visibility and increased life

• Nylon kit bag for storage

• PHG55A, PHG57A, PHG59A, PHG68 and PHG73A

AT3000 $192.95 $173.65Blue-Point® D/i" Capacity Reversible Air Drill • Convenient, 1-hand forward/reverse operation

• Bottom handle diffused exhaust

• Comfort grip handle

• Keyless chuck saves time when changing bits

CDR761 $374.95 14.4V Lithium Drill Kit• Lightweight drill and battery only 2.4 lbs.–matches

weight of 12V competitor microdrills

• Small size to get in tight spots - Under dash, Firewall, etc.

• 150 in.lb. of torque handles a wide variety of applications

• Two speed drill (400/1400 RPM) - low speed for higher torque applications/high speed for steel drilling

• 9 position clutch – delivers a range of torques from 8 to 50 in.lb.

DBTB121 $137.95 $124.0021pc Jobber Length Thunderbit® High Speed Steel Drill Bit Set

• DBTB1/16 thru DBTB3/8 (21 bits) in B121B Metal Drill Index

CTLED7850 $99.95 $89.95 18V Lithium Work Light• 300 lumens for a

super bright output

• Dual-reflector system: Flood or Spot option

• 12-hour run time with low-battery indicator

• Lightweight aluminum head rotates 120°

• Tempered glass lens and impact-resistant nylon housing

• CTLED7850-18 Mirror Reflector included; changes unit into a Flood Light

• Battery not included

PDR3000A $359.95 D/i" Heavy Duty Air Drill• Top mounted forward/reverse switch allows

1-handed operation for convenience and to save time

• 5 vane air motor provides more drilling power to get the job done faster

• Over-molded cushion handle insulates from cold and vibration to reduce user fatigue

• Reversible variable speed trigger for more control of drilling speed allows for precise drilling and increased safety

• Internal ball bearing construction for smooth operation and extended tool life

PH3050B $417.45 Heavy Duty Air Hammer• Heavier piston produces a faster,

harder hitting blow producing more power

• Dual elastomer cushions absorb shock and vibration to reduce user fatigue

• 4 position built in air regulator varies power for different applications

• Includes PH200D chuck retainer

• Intended for heavy-duty applications such as cutting large bolts and rivets, separating ball joints, cutting heavy gauge sheet metal and riving bushings

• 3,400 Blows per Minute, BPM

• Variable speed trigger with built-in air regulator

• Includes quick change retainer

AT2050 $179.95 $161.95Blue-Point Heavy Duty Air Hammer


POWER TOOLS

CTR725 ¼" Dr. 14.4V MicroLithium Cordless Ratchet

CTR7613⁄8" Dr. 14.4V MicroLithium Cordless Ratchet$394.95 each• Exceptional performance, control and

accessibility, plus the added freedom of cordless operation

• 30 ft. lbs. torque output

• Easily withstands 160 ft. lbs. of manual torque

• Digital variable speed trigger for precise control

• Built-in brake stops the tool from throwing sockets and fasteners

• Over and under temperature protection keeps tool operating at peek efficiency

• Utilizes a 14.4V lithium ion battery pack that can also be used in existing Snap-on® 7.2V lithium ion micro tools

• Battery “Fuel Gage” LED cleverly integrated into handle

• Integrated LED headlight

CAG6850DBKIT $159.95 $143.95 Cordless Adhesive Gun• Professional grade tool and adhesives

• 4 different types of adhesive sticks available

• High efficiency melt chamber

• Low battery warning signal and auto shut off alarm

• Precision solid state temperature control

• 2 finger trigger and convenient back loading

• Tricolored operational lighting

• Battery and charger sold separately

AT700F $186.95 $168.25Blue-Point® 3/8" Dr. Heavy-Duty Air Ratchet

• Delivers 5 to 45 ft. lbs. of torque

• Rugged ball bearing mounted air motor and precision planetary gear system

• Easy-to-use variable speed throttle plus adjustable air regulator

• Lightweight aluminum housing

FAR25A $346.95 ¼" Dr. Air Ratchet• Air motor vanes resist wear, chipping, cracking and moisture

• Needle bearing supported drive shaft provides a smooth running tool

• Replaceable air inlet bushing prevents cross threading of air inlet on handle

• High speed, low torque air ratchet

• 410 RPM free speed for fast removal/installation

• Maximum torque of 30 foot-pounds won’t strip threads

• Slim drive head combined with a long reach—11.2" overall length—makes getting into tight spots easy

• Adjustable exhaust deflector directs exhaust away from the work area

• Lightweight—just 2.08 pounds—combined with the ergonomic comfort grip handle reduces fatigue

• 2.6 CFM air consumption

FAR7000 $384.95 3/8" Dr. Air Ratchet

CTG761 $314.95MicroLithium Cordless Temperature Gun

• Ergonomic design features a comfort grip that’s equally comfortable for both right and left-handed users

• Widest temperature range of -58° to 1,832° F

• Most advanced features of any professional IR gun

• Powered by 14.4V MicroLithium battery and charger–interchangeable with our new 7.2V cordless tools and eliminates the need for extra chargers and back-up batteries

• Includes 14.4V battery, charger and case


POWER TOOLSPSF4312 $274.95 3" Low Vibration Orbital Sander

PS4512 $276.55 5" Low Vibration Orbital Sander

PS4612 $279.95 6" Low Vibration Orbital Sander

PSF4612 $274.95 6" Low Vibration Oribital Finishing Sander

PS4609 $299.95 6" Geared Sander

PS4809 $337.95 8" Geared Sander• Patented dust shield keeps dirt and dust out of

motor for longer tool life

• Ergonomic adjustable top grip adjusts to fit users hand for more comfort

• Robust front spindle and balanced crank help reduce vibration while sanding for less user fatigue

• 1-piece aluminum housing and steel cut gears provide extended tool life

PT280THUGA $559.95 Crud Removal Air Tool• Quickly remove seam sealers, rust and paint and

underbody protectors

• Ergonomic handle for comfort

• 10 position power/speed regulator

• Paddle-style safety trigger prevents accidental start-ups

• Soft, ergonomic adjustable grip with S-shaped paddle is indexible to fit the user’s hand

• Patented O-ring sealed motor is field replaceable and extends tool life by preventing dust and debris from entering mechanical components

• Powerful .25 HP motor delivers 12,000 RPM with unsurpassed control and comfort

• Robust front spindle and precision balanced crank provide smoother operation with minimal vibration

• Lightweight, sanding pads are flexible for spot sanding and surface preparation from body fillers to paint primer

• Multi-position speed regulator allows free speed adjustment depending on the sanding application

• Non-vacuum PSA pad included

• PSF4312 also features a 3" lightweight, 30 g pad, providing more control for precise fine sanding

AT425R $192.95 $173.65Reversible High Speed 5” Air Disc Sander• Includes 3", 4" and 5" backing discs

• One hand reverse

• Comfort grip handle

• Built-in speed regulator

• 50 ft. lbs. torque output; 3,000 blows per minute

• Small, light weight design to access tight spaces

• Integrated soft grip handle gives positive tool control to work longer with less fatigue

• 55 minute battery charge

• Includes case, charger and 2 batteries

CT561 $266.95D/i" Dr. Ni-Cad Cordless Impact Wrench

CTS561CL $184.95¼" Dr. Quick Change Hex Ni-Cad Cordless Screwdriver• 60 in. lbs. torque output

• 6 position clutch means torque can be set to match the job requirements

• Includes case, charger and 2 batteries

CT525 $266.95¼" Dr. Ni-Cad Cordless Impact Wrench• 40 ft. lbs. torque output

• Pistol grip style handle for ease of use and extra comfort

• Toggle style trigger

• 55 minute battery charge

• Glass filled nylon housing delivers high impact strength

• Includes CTC572 Charger and 2 CTB5172 batteries in a soft case


POWER TOOLS

• 180 ft. lbs. torque output

• Compact and tough-for high torque with limited access

• Glass-filled nylon housings provide high-impact strength for longer tool life

• Quick, 1-handed toggling with oversized forward/reverse triggers amount to less stress and fatigue — so techs work better longer

• A cordless bolting solution for a wide range of stubborn fasteners

• Ideal for muffler work, engine compartment work and more

CT4418 $519.95D/i" Dr. 18V Ni-Cad Impact Wrench

• Provides an incredibly powerful 230 ft-lbs at a lightweight of 4 ½ lbs.

• High capacity 54 watt-hour, 18V lithium battery for long run time

• High efficiency rare-earth magnet, 4-brush, motor for maximum durability

• Fastest 3/8" impact wrench on the market and will remove a 7/8" bolt tightened at 300 ft. lb. in less than 5 seconds

• The CT8810 can remove 480 bolts tightened at 200 ft. lb. on 1 battery charge

• Cold-formed, alloy steel anvil for maximum durability

• More torque and greater mobility than you’ve ever experienced in a 3/8" Dr. impact

• A portable powerhouse that will withstand the toughest conditions in or out of the shop

• 550 Ft lbs. of torque, 7400 RPM, 1200 blows per minute

• Built-in 5-position adjustable air regulator plus a variable speed trigger for maximum user control

• Twin-hammer impact mechanism designed to hit hard yet offer tool longevity

CT8810 $649.95 18 V Compact Lithium D/i" Dr. Impact Wrench

• 325 ft. lbs. max torque; 10,700 RPM free speed; 1,400 blows per minute

• Twin-hammer impact mechanism provides harder hitting blows

• Cushion trigger for comfort

• 2-year warranty

MG325 $424.95D/i" Dr. Super-Duty Impact Wrench

AT5500 $264.95 $238.45 Blue-Point® Super Duty ½" Dr. Impact Wrench

CT6850 $629.95 ½" Dr. 18V Ni-Cad Cordless Impact Wrench Kit• 400 ft. lbs. torque output

• Patent pending true flat anvil allows the socket to easily slide on and off the anvil

• Super heavy-duty impact mechanism delivers power and durability for quick removal of stubborn fasteners

• Heat treated alloy helical gears handles high torque loads

• Cushion mounted heavy-duty motor and brushes reduce vibration, providing a longer run time

• 1-handed forward reverse switch

• Includes 2-CTB4187 Ni-Cad battery packs and CTC620 charger in storage bag (not shown)


POWER TOOLS

AT192A $164.95 $148.45Blue-Point® Air Reciprocating Saw• Performs straight or scroll cuts in metal and plastic

• Adjustable blade guard

• Dual chuck accepts 0.035" standard air saw blades and 6" long reciprocating saw blades

• Can cut 1/8" (3 mm) thick mild steel

• Low vibration—for less user fatigue

• Smooth cutting action

• Featherable paddle trigger with safety lever for easy operation

• 360˚ adjustable exhaust deflector

PT100A AND 200A SERIES• 5 vane air motors for increased power

• Ergonomic Alcryn® handle grips are comfortable, insulates from the cold and reduces vibration

• 10-position speed regulator precisely matches the speed to the job, giving the user unmatched control

• Thermally-balanced air motors route exhaust air over the bearings to keep them cool

• Variable speed paddle-style safety trigger prevents accidental start-ups

• New collet system on the die grinders for improved bit retention and minimal runout

• High-quality single-row bearings allow for smooth operation and minimal runout to keep the tool running longer

PT110A$269.951/3 HP Mini Angle Die Grinder

PT100A $199.95 1/3 HP Mini Die Grinder

PT210A $329.95Angle Die Grinder PTS1000

$329.95 Reciprocating Air Saw

with Dual-Chuck Mechanism

AT1212 $102.95 $92.65Blue-Point Needle Scaler• Mini size for access in confined areas• 12 high tension steel needles conform to

any irregular surface for cleaning crevices

CTRS6850 $475.95 18V Ni-Cad Cordless Reciprocating Saw

CTRS6850DB $368.95 • Sealed nose mechanism keeps dirt out

• Turbine-style cooling system runs cooler

• CTRS6850 includes Ni-Cad battery, charger and case (not shown)

• CTRS6850DB includes tool body only

PT250A $262.95 ½ HP 3" Cut Off Tool

PT400L $332.95 1HP Extended 6"L Shaft Die Grinder

• Provides the maneuverability to reach even the most hard-to-reach areas

• Surprisingly lightweight at just 2 ½ lb (PT400L) and 2lb (PT200AL) for superior control, low vibration and less fatigue

• Steel extension housing and steel wear motor plates for durability and longer tool life

• Power through any job

• Thermally balanced motor delivers up to 23,000 RPM (PT400L) and 22,000 RPM (PT200AL) of free speed for maximum performance, with built-in speed control and a double-taper, heavy-duty collet system for less run-out

PT200AL $309.95 ½ HP Extended Shaft Die Grinder


POWER TOOLS

PT450 $344.95 1 HP 4 ½" Angle Grinder

PT410 $344.951 HP Right Angle Die Grinder

PT490 $399.951 HP Heavy-Duty 4" Angle Cut-Off Tool• Power To Weight–thermally balanced 1 HP air motor delivers

12,000 RPM of smooth cutting action at only 3 ½ lbs.

• Instinct side handle (included) to increase leverage and ergonomic comfort grip handle for less user fatigue

AT157R $164.95 $148.45 Blue-Point 3" Reversible Cut Off Tool• Recommended for cutting mufflers,

hose clamps, bolts and sheet metal

• Spark direction control

• 12,000 RPM maximum free speed

• 1 HP Thermally balanced air motor

• Dual taper collet system

• Lightweight only 2 lbs. (PT410), 3 ¼ lbs. (PT450)

• Includes removable Snap-on® Instinct® Screwdriver side handle

• Ergonomic comfort grip handle

PT490 AND PT430 CUT-OFF TOOLS• Increased stability–internal cooling system routes

air efficiently through the tool, reducing vibration and preventing overheating

• Ergonomic comfort grip handle and paddle style trigger allow the user to work all day

• Double bearings for smooth operation

• Adjustable wheel guard so tool can be used at any angle

• Built-in speed regulator for easy adjustment

• Rear diffused exhaust keeps exhaust and debris away from user and work area

PT430 $294.951 HP Heavy-Duty 3" Cut-Off Tool• Powerful Cutting–thermally balanced 1 HP air

motor delivers 25,000 RPM of smooth cutting action but weighs only 1.6 lbs.

AT118 $149.95 $134.95Blue-Point® Comfort Grip Mini Angle Die Grinder• Clean dies, rotors, backing

plates and brake pad mounts

• Removes gasket material, grinds valve seats, dresses welds and enlarge holes

DIAGNOSTICSEESC318 $4,195.00 SOLUS Ultra® Full-function Scan Tool• Never stop to charge! Steady-charge battery technology charges directly

from vehicle

• Best-in-class display! Big 7" widescreen has 800 x 480 pixels – 50% larger than competitors

• Never change keys! A single keyless adapter covers all OBD-II applications

• Operate all functions from the touch screen or from the 4-way keypad and Y/N button

EESC319 $1,725.00 Ethos® Plus Scan Tool• Big, easy to view 5.6"

full-color VGA display for clear, accurate results

• Keyless vehicle adapter for simple hookup

• "Clear codes and read live data on dozens of vehicle systems"

• "OEM-specific coverage for 45 makes of domestic, Asian, and (optional) European vehicles"


SHOP & TECH

• 4.3" diameter screen lets techs see more than ever before

• Digital still image capture with included 2GB SD card storage

• Includes standard 36" imager, 8.5mm diameter head

• Touch-screen interface enables easy feature selection

• Includes 90˚ glass mirror, magnet retrieval accessories, storage tray

BK5600 $489.95 $440.95Digital Video Scope

EECT2H $47.95 $43.15 6/12V Mini Circuit Tester

• Featuring our smallest handle and reduced length shank for limited-space jobs

• Patented Instinct® Handle for style and comfort

• Smart LED design has more brilliant light output and longer life than traditional bulb

• Molded internal contact links with the LED assembly top dimple for low-loss signal transfer

• Finger turn screw-on strain relief is easy on/off, has flexible wire protection at the critical bending point and is O-ring sealed

SVTS263A$259.95 $233.95Air Powered Cooling System Pressure Tester• Uses pressure regulated shop air to

pressure test cooling systems for leaks• Compatible with most cooling system

adapters

SVTS262C $218.95 $197.05 Cooling System Tester• Test pressure caps and cooling systems

for leaks on a wide variety of domestic and import vehicles

• Cap has rotating lever for fine pressure adjustment

• Set features hand pump and tester head with 12" hose that reads in both PSI and kPa

ACTR4151A $216.95 $171.95Manifold Gauge Set• Manual couplers are spring loaded to eliminate

service valve damage

• Extruded aluminum body with solid brass fittings

• High side and low side silicon anti flutter gauges (65mm) reduce vibration

• Sight glass permits visual monitoring of refrigerant flow

• 96" yellow charging hose plus 72" red and blue hoses

EELD100A $1,395.00 $1,255.00Evap Smoke Machine • Find wind and air leaks when

replacing door and trunk seals

• Contains Diagnostic Smoke® technology for EVAP testing and general purpose applications

• Patented UltraTraceUV® non-contaminating dye solution pinpoints leaks smoke alone can’t

• Combo LED and UV light in one, plus special glasses are included

BK6500 $899.95 $809.95True Digital Video Scope

• 4.3" diameter screen lets techs see more than ever before

• Touchscreen interface for easy feature selection

• Dual-imager lenses: straight ahead and 90˚ angle

• Imager length: 36" (914mm)

• Store the digital video image to internal memory or to an SD card

• Rechargeable lithium battery

• USB port to transfer data

ACT760B $329.95 $281.50Refrigerant/Gas Leak Detector • Heated Sensor Technology

• Long life, stable sensor

• Automatic & manual calibration and reset to ambient levels

• 3 adjustable sensitivity levels

• True mechanical pump

• Low battery indicator

EECT3HL $56.95 $51.256V and 12V Classic Bulb Circuit Tester• 6' straight rubber cord

• 3 5/8" stainless shank

Digital Display 12V DC Circuit Tester• Detects voltage, power, ground and

circuit integrity• LCD display provides a ‘no guess’

voltage value of the circuit, backlit LED indicates Green for Ground or Red for Power

• Provides 1-handed operation of circuit tester 12V DC and digital display of a multimeter

EECT400 $89.95 $80.95


SHOP & TECH

EEBC100 $288.95 $260.00 Blue-Point Manual Battery Charger/Engine Starter• Manual set charging time as required

• 200A, 12V and 100A, 6V engine start for emergency starting

• 40A rapid charge charges in ½ to 1 hour

• 10A fast charge charges in 3 to 5 hours for everyday charging needs

• 6" wheels moves easy over rough ground

• Rugged retractable handle provides convenient storage

EEJP500 $327.95 $285.25 12V Jump Pack• 2,250 peak amps, 275 CCA

• High-output AGM battery for powerful starting of multiple vehicles

• 3A built-in, automatic charger recharges quickly without overcharging

• ON/OFF safety switch keeps clamps from being activated until switch is engaged

EEDM504D $259.95 $233.95 Auto-Ranging Digital Multimeter• Manually select AC or DC

measurement function

• AC/DC Current functions: measure the parasitic draw from the battery with ignition off

EEDM604C $494.95 $445.45 CATIII 1000V, CAT IV 600V Multimeter• Advanced meter, plus allows user to

safely diagnose hybrid vehicles before doing body work

BK6500 $899.95 $809.95True Digital Video Scope

MTTL800 $179.95Modular Test Leads Kit• Exceptional versatility for

most auto testing needs

• For use with all Snap-on® & Blue-Point® Multi-Meters

• Includes black nylon pouch - folds up for protected transport and storage

EESM500 $184.95 Soft Side Memory Saver• Provides 12V power to the vehicles

computer system saving settings such as radio, seat position, DTCs, keyless entry and more while you disconnect vehicle battery during body repair

• Connects to the vehicle through the built in 42" OBDII cable (18 gauge) or 12V accessory cable

• Soft-side case will not scratch or dent vehicle’s interior and console like a traditional unit’s hard-plastic housing

EEBM500 $115.95 $104.354A 6/12V Battery Maintainer• Fully automatic 6/12V operation, 4A charging rate

• Ergonomic design with large buttons for easy use with gloves on

• Compatible with conventional, maintenance free, AGM, gel cell, spiral wound and deep cycle batteries

• Includes quick connect output cord with clamp set, ring terminal set and 12V adaptor output accessories

• Maintain battery on stored vehicles so they start when you need them

• Reverse polarity and battery fault warnings

TPMS3 $1,639.95 $1,475.95 Tire Pressure Sensor System Tool• Tests TPM sensors and relearns

TPM systems

• Comprehensive US, European and Asian coverage

• Model-specific sensor testing and verification

• Quickly and easily relearn TPM systems after sensor replacement or tire rotations (includes step-by-step relearn procedures)


SHOP & TECH

ECFLED68 $97.50 $87.75 68-Led Cordless Rechargeable Shop Light• Diffusion Tube Technology

eliminates shadows

• 180° light pattern illuminates the entire engine compartment

• Offers 3 hours of continuous light

ECFONELITE $31.95 $28.7512 LED Pocket Light

• 12 high output, front facing SMD LEDs produce 100 lumens on high, 65 lumens on medium

• Uses 3AAA alkaline batteries for 7 hours runtime on high or 12 hours on medium

• Robust rubber boot protects from drop hazards

• Compact enough to take anywhere with pocket clip for added versatility

WOD1000 $5.95 $5.35 Fingernail Brush• For best results, use with any

“WOD” series hand cleaner and/or towels

WOD5020 $20.15 $18.15Hand & Tool Cleaning Towels• Convenient for

cleaning tools or hands of oil and grease

• Towels contain lanolin & rust preventatives

GLOVE501BLB & BXLB$46.95 $42.25 SuperCuff® Impact Gloves

• 2 layer finger tips for long life

• Full finger dorsal thermal plastic rubber protection

• Enhanced dexterity

GLOVE410 (M,L,XL) $14.95 $13.45 Cut Resistant Gloves • Excellent abrasion,

blade and tear resistance

• Provides excellent protection while maintaining great dexterity

GLOVE8 (MA,LA,XLA) $21.95 $19.75 Nitrile Technician Gloves (Box of 100)• Powder free plus

excellent tear resistance

• Use for mechancial repairs, spray painting and refinishing applications

• Resists auto detailing chemicals

GLOVE601 (S,M,L,XL,XX) $29.95 $26.95 eachMossy Oak® Mechanic Gloves • Form fitting stretch spandex top

• Long lasting 2-layer thumb panel

• Additional panels of synthetic protection surround the fingertips

• Durable abrasion resistant synthetic palm

• Machine washable, will not shrink or fade

• Noise reduction rating of 28 dB for protection

• Lightweight and comfortable

GA3200 $26.95 $24.25 Blue-Point® Ear Protection

ECFSLIMRC $57.95 $52.15Blue-Point Slim Rechargeable 10 LED Work Light

• 10 Surface Mount Diode (SMD) LEDs provide 170 lumens of light output

• Battery (1200 mAh) provides up to 2 ½ hours of runtime at 100%, 4 hours at 50%

• 90˚ light angle for broad illumination of workspace

• Bright 50 lumen spot light on top for inspection use

ECUB128 $214.95 $193.45 128-LED Cordless Rechargeable Under Hood Light• Diffusion Tube Technology eliminates shadows

• Light distributed 180˚ to illuminate entire engine compartment

• Rechargeable lithium-ion 4400 mAh battery for 3 hrs of continuous light

• Under hood bracket telescopes from 47" to 71" to fit most vehicles

• 21 front facing LEDs that provide high light output to work surfaces

• 5 LEDs on top that provide spot-beam coverage

• 180˚ folding design enables multi-positioning

• Includes both 110V AC adapter and 12V DC Car adapter

ECFLED215A $91.95 $82.75 Blue-Point Multi Led Shop Light

• Extendable lightweight aluminum holder: 47"–71" covers a wide range of vehicles

• Test results show 27% brighter, +28% longer life than primary competitive unit

ECUB9500 $181.95 $163.75 95-Led Under Hood Light

TL900L $34.00 $30.60 Blue-Point 9" Aluminum Lighted Level• 45°, 90° and 180° scales for flexibility

• Rare earth magnets attach to ferrous surfaces

• Use in low light


SHOP & TECH

GLASS40CEAR (Clear Lens) GLASS40YEAR (Amber Lens) GLASS40GEAR (Gray Lens)$20.50 $18.45 each Blue-Point Safety Glasses with Built-in Ear Plugs • Nylon slides allow easy extension and retraction of tethered ear plugs

• Soft plastic nose bridge provides added comfort and adjustability

• Meets ANSI Z87.1–2010 requirements

• Easily replaceable ear plugs included

• Height adjustable support post (36.5" to 48.6") allows tray to clear fender or front end on most vehicles

• Protective bumper included for the support post

• Removable parts tray and screwdriver holders built into the tray

• Maximum load capacity: Tray (75 lbs.), Drawer (25 lbs.)

SOSTPC $406.95 $380.95Automotive Service Tray (Matte Black)

• Unique drop provides generous shoulder clearance

• Foam pad has durable vinyl cover

• 40"L x 17"W x 4"D with 16 ga. steel frame and low ¾" ground clearance

JCW8A $114.95 $103.45Blue-Point Oval Tube Creeper

BLPVAC5 $196.95 $177.25 Blue-Point® 5-Gallon Industrial Wet/Dry Vacuum• Combines the highest degree of

suction/airflow

• Designed for strong performance with less motor strain

• Engineered for easy portability and long life

SEATCOVERBLK (Black)SEATCOVERBLU (Blue)SEATCOVERRED (Red)$33.95 $30.55 eachSnap-on Racing® Seatcover

• Universal fit for virtually all vehicles with reinforced expansion panels

• 4oz Premium Weight for durability, long life

• Water Resistant & machine washable

KNEEPAD3 $81.95 $73.75 Gel-Cushioned Kneepads • Wide neoprene rear lower flap helps

eliminate chafing

• Velcro straps for easy on/off, secure fit and comfort

• Rugged wear cap is extended to provide protection for the upper shin


SHOP & TECHSHOP & TECH

YA427B $20.95 $18.85 Blue-Point® Welding Gloves• Helps protect hands from

sparks when welding

PLASMA25 $2,575.00 $2,225.00 25A Standard Plasma Cutter

• Cuts ¼" and will sever up to D/i" material

• 115V input voltage

• Adjustable cutting depth

• Cuts D/i" and severs ½"

• 115V or 230V input voltage

• Ideal for automotive repair, collision repair, heavy duty truck, farm and metal fabrication shops

WELDER & PLASMA CUTTER

TECHNICAL SUPPORT

800-ABC-WELD

• Fully adjustable, has the most clarity, the widest viewing area and is capable of handling multiple welding processes

• 4 arc sensors provide the widest range of sensitivity to trigger the lens under multiple welding processes

• Grind lockout feature doubles as a face shield

• YA4608 features 4 button "Digital Control" - allows easy, precise selection of shade protection, delay and sensitivity

YA4607

YA4608

YA4608 $419.95 $377.95

Auto-Darkening High Definition Lens Welding

Helmet with Digital Lens

YA4606 & YA4607 $399.95 eachAuto-Darkening High Definition Lens Welding Helmets

YA4606

PLASMA30i $3,695.00 $3,065.00 25A Inverter Plasma Cutter

• Made of a new nylon material

• Helmet is much more flexible to get into tighter spaces

• Additional 1 ¼" of material on top of helmet for more coverage

• Cooler for the user as it will not heat up as much as ABS version

• Lighter weight and much more resistant to heat

• Optional auto-darkening lens available (EFPADFLENSA)

EFPOLEGLORY, EFPJURASSIC, EFPBONEHEDB, EFPSTRIKERB, EFPHANNIBALB & EFPNSTLKRB $149.95 $134.95 eachExtreme Face Protector Fixed Shade Welding Helmets

EFPBONEHEDB

EFPNSTLKRBEFPHANNIBALB

EFPSTRIKERB

EFPOLEGLORY

EFPJURASSIC

FLEXTIG25 & CKSTP2125A $679.95 $570.95 each DC TIG Conversion Kits• Adds DC TIG

welding capability for ferrous metals

MHG5A & MHG5B $1,495.00 $1,270.00 each Aluminum Spool Guns

• Great for aluminum panel repair

CKS15FN1030 $531.95 $462.95Flexible Neck MIG Torch• Flexible neck torch for

welding exhaust systems

• Fits MIG140, MIG220 and MM Series Welders


SHOP & TECH Weld Det. Opt. Alum. Model Amps Cap. Duty Cycle Feed Input Voltage Opt. TIG Pack Spoolgun

MM250SL-CAN 270A 3⁄8" 100% @ 185A Yes 208/230VAC FLEXTIG25 MHG5BMIG220-CAN 220A 5⁄16" 60% @ 185A No 208/230VAC CKSTP2125A MHG5A MM140SL-CAN 140A 1⁄4" 100% @ 140A Yes 115VAC FLEXTIG25 MHG5B

Snap-on® MIG Welders have higher duty cycles at maximum amperage for longer continuous weld times and performance that surpasses the competition.

1. Wire feed assembly, constructed of precision-machined cast aluminum, features all-metal gearing and 800 in/min. delivery for consistent wire speeds.

2. Capacitor bank and diode set deliver consistent voltage and industry-leading smooth-arc characteristics.

3. All-copper wound, tapped transformer features Nomex® insulation and bolted laminations to provide precise voltage control and repeatable welds.

1

2

3

MM140SL-CAN $3,295.00 $2,595.00 140A Muscle MIG Welder (not shown)

MM250SL-CAN $3,795.00 $2,920.00 270A Muscle MIG Welder

• Create higher amperage welds without stopping • Featuring 8 voltage setting to dial in the proper current quickly• Detachable feeder allows ease of mobility• Spot, stitch and continuous settings for a variety of welding jobs

MIG220-CAN $2,495.00 $2,170.00 220A Workhorse MIG Welder

• Exact voltage settings for precise heat control and ease of use

• Ability to add a SpoolGun for aluminum welding or

• TIG Accessory Pack for ferrous metals

• Includes Voltmeter to indicate OCV or Arc Voltage


SHOP & TECH

ZEN456 $81.00GoJak® Jack Storage Rack • Holds up to 4 GoJak jacks and fits all models

• Loads and unloads in seconds

• GoJaks shown not included

• Compact, powerful and fast to use

• Adjustable top swivels 360˚ for easy grab of vehicle jack points

• Convenient handles located at front and rear for maximum flexibility during use and transport

ZENTBT2 $675.30 RakJakTM 2 Ton, 18" Extension–w/o Handle

• Effectively clean metal parts right down to the bare substrate

• Clamshell design facilitates ease in loading of heavy parts

• Right side door allows for easy loading for small parts

• Cartridge filter separates dust from media

• Variable output blast gun

• Powerful 135 cfm dust collection with a lighted work area

YAH3825CAN $2,675.00 $2,395.00Blast Cabinet

ZENDBT2 $499.95 RakJak 2 Ton, 13 ¾" Extension–w/o Handle

ZEN4711 $235.00 11"W Automotive GoJak

• Lift and move vehicles in any direction without the use of a floor jack

• Lifts tires up to 11"W and 34"H

• Can move a vehicle up to 4700 lbs. (1177 lbs./wheel)

ZEN4711L (not shown) $235.0011"W Left-hand Automotive GoJak• Identical to the ZEN4711 but pedal is positioned in

opposite direction• Primarily used when front wheels are locked in extreme

right or left positions where accessing the pedal is more difficult

• Lift and move vehicles in any direction without the use of a floor jack

• Lifts tires up to 13"W x 36"H

• Can move a vehicle up to 6,200 lb. (1,550 lb. per wheel)

• Two 4" and two 5" heavy-duty ball bearing casters

ZEN6200 $272.95 Light Truck GoJak Jack

ZEN6200L $272.95 (not shown) Left-Hand Light Truck GoJak Jack


SHOP & TECHSHOP & TECH• Versatile and compact

professional soldering irons

• Featuring an ultrasonically welded gas tank for better strength, safety and reliability

• Made with butane compatible plastics to prevent gas from leaking

• Kits include 5 soldering tips plus hot air, hot knife and air deflector tips

• Converts to a heat shrink tool and hot knife with the addition of interchangeable tips

YAKS32A $194.95 $175.45

Butane Soldering Iron Kit (15-125W)

AYS5660 Iwata 1.3mm Solvent Basecoat Spray Gun

AYS5670 Iwata 1.4mm Solvent Basecoat Spray Gun

$645.00 eachLPH400 LVX Series• LVX orange

cap provides excellent coarse atomization for metallic and pearls

AYS5640 Iwata 1.3mm Basecoat Fine Atomization Spray Gun

AYS5550 Iwata 1.4mm Basecoat Spray Gun w/fine Atomization

$645.00 each

LPH400 LV Series• HVLP spray gun• Low air consumption• Superior atomization

Iwata Technical/ Sales Support Call: 1-800-628-5449

AYS5800 Iwata 1.3mm Basecoat Spray Gun

AYS5810 Iwata 1.3mm Clearcoat Fine Atomization Spray Gun

$815.00 each

SUPERNOVA Series• Delivers a consistent

droplet size when atomizing

• Reduce common application issues

• Equipped with stainless steel fluid passages ideal for any type of material, solvent borne or waterborne

TORCH4 $58.95 $52.95 Blue-Point® Butane Blow Torch• Powerful butane

blow torch flames reach 2,400˚F

• Great for light gauge silver soldering, brazing, welding and electronic repair

• Powerful butane blow torch flames reach 2,400˚F

• Excellent for heavy-duty soldering, A/C and heat exchanger repairs, radiator, bolt removal and many other heavy-duty uses (4" flame)

TORCH6 $74.95 $67.45Butane Blow Torch

YAKS22A $159.95 $143.95Butane Soldering Iron Kit (15-175W)

BLPK14HVLP $180.55 $162.50 Blue-Point 1.4mm HVLP Spray Gun• Stainless needle

and tip

• Superior spray performance

• Lightweight spray guns for primer, base and clear coat

• Superior spray performance

• 1-year warranty

BLP10MHVLP $219.75 Blue-Point 1.0mm Mini HVLP Spray Gun

BLP13HVLP, BLP14HVLP, BLP15HVLP & BLP18HVLP $256.90 each Blue-Point 1.3mm, 1.4mm, 1.5mm and 1.8mm HVLP Spray Guns

BLP14CONV $206.35 Blue-Point 1.4mm Conventional Spray Gun

AYS4755 Iwata® 1.3mm Spot Repair Spray Gun

AYS4760 Iwata 1.4mm Spot Repair Spray Gun

$575.00 each

W400 LV Compliant Series• Center post gravity fed

spray gun with SS fluid passages

• LV technology with high-TEC standard to give you high transfer efficiency control and fast application speed

• Usage: fine atomization, clear coat and single stage

HSA3001S $26.20Uni-Sparker• Torch igniter for automotive,

industrial and HVAC use

• Over 100,000 strikes

• Works with all gas torches


SHOP & TECH

PUL0800 $136.95Mo Clamp Tac-N-PullTM With Pull Plates• Tack weld in place plates for hard to hold pulls

• Great mid-range kit with powerful lightweight gun

• Stud Ease technology holds stud in welder for easy out-of-position welding

HSA5500 $499.95Uni-Spotter 5500 Stinger Plus

PUL0300 $137.95Mo Clamp Self-Tightening Jr® Clamp• 1 ½"W bite for aggressive pulling

• Original wedge with new angled tooth design

DFX-DF850CL $459.95Cordless Hot Stapler Kit • Save bumpers, headlight

assemblies or any other thermoplastic part by stitching them together

• Creates a strong, structural repair while still maintaining flexibility to allow proper fitting of components

• Kit includes 350 staples (7 varieties), finishing iron, plastic fill rods, fiber flex rods and blow molded case

PUL7050 $479.95 Baby Tram• Measures from 2 ½" (65mm) to 7' (2.1m)

• Mo-Clamp® Baby Tram measures point-to-point, determining collision damage to unibody cars and checking critical measurements during repair

PUL0808 $184.95 Mo Clamp Maxi Tac-N-Pull with Pull Plates• Design allows for angled and/or uneven

pulls and getting around obstructions

PUL6325 $64.95 Tie Down Hook Cluster• All your most needed hooks in one place

• Made from quality steel alloy

PUL6328 $99.95 Hook Cluster with 3' Chain (not shown)

PUL5818 $162.95 Mo Clamp 3" Down Pulley• Made of Mo-Clamp Tru-Tuff

steel alloy

PUL4145 $51.20 Mo Clamp Double Grab Hook Assembly• For easy 3/8" chain connection

• A time saving tool

PUL6318 $46.40 Mini J Hook with Grab Hook (not shown)

PUL0305 $126.50Mo Clamp Self-Tightening Dyna-MoTM Jr Clamp• Drop-forged round wedge to keep twist out of chain

• Aggressive cross-hatch tooth design with spring-loaded jaw for easy opening

• 1 ½" throat clearance fits over a flange or frame horn, or around a lip to pull from behind

PUL0200 $158.95Mo Clamp Self-

Tightening C® Clamp

PUL0551 $231.45Mo Clamp Tight Opening Clamp• For hard to pull areas such as frame rail

ends, core support, box sides and cowls

• Aluminum tram with steel locking screws

• Measures from under 6" (approx. 150mm) to 15' (4572mm)

• See easy to read Metric/SAE measurements through viewing window

KTOART90 $432.15Professional Telescoping Measuring Tram


SHOP & TECH

YA1544A $364.95 $328.45 Blue-Point® 4-Ton Body Repair Kit• 4-ton capacity model gives you the pushing and

spreading power you need to make fast and easy work of everyday repairs

YA1545 $521.95 $469.70 Blue-Point 10-Ton Body Repair Kit (not shown)

DFXDFDM550DX $429.95Dent Fix® Ding Massager Deluxe Glue Pulling Kit • Dings and dents caused by hail and other weather

damage are easily repaired

• Glue tabs eliminate the need to access back of panel

DFX-DF900A $6,995.00Alu-Spot Aluminum Dent Repair System

BLK65425 $473.30Porto-Power® Air Foot Pump• 3 positions provide cylinder advance, hold or

retract operation

BLK65139 $190.30Porto-Power Flat Body Cylinder Kit• Includes 4 adaptors (¼", ½", 1" and 1 ¼")

• Various height magnetic adaptors in a carrying case

HSA7600 $59.95 Stud Pulling Tool • Quick & easy multi pulls across a large repair area

• Make your stud welder more versatile

HSA4550 $249.95H&S Autoshot Starter Kit Plus• Upgrade starter stud welder with Stud Ease Technology–holds

stud in place

• Sensitive trigger for one-handed operation

• Includes T-Handle slide hammer and studs

• Contains everything you need for aluminum repair in one convenient location

• Includes paint cleaning tool

• Digital temperature set heat gun

• Body file holder and 350mm flat flexible file

• Infrared non contact thermometer with laser guide

• Stainless-steel brush

DFX-DF509 $189.95DFX-DF505 Cart

DFX-DF505 $1,595.00Dent Fix Maxi 220V Dent Pulling Station

• Provides power to shrink, pull rocker panels, hail damage, creases and dents hard to reach places

BLK65454 $432.15Porto-Power 5-Ton Pull Rams with Hooks

• Equipped with chain adaptor claw hooks on each end

HSADK1000 $245.00Dent Killer Pulling Attachment• Upgrade your Uni-Spotter

stud welder to a studless lever action dent puller

• Light weight and portable for out-of-position pulls

• Works great to restore body line


TOOL STORAGE

While every attempt is made to ensure accuracy, errors during publication can occur. Product features and specifications can change. Pricing can change. Limited quantities. Participating Franchisees only. Offer expires March 31, 2014. Offer cannot be combined with any other trade in or discount. Snap-on and Blue-Point are a trademarks of Snap-on Incorporated

©Snap-on Incorporated 2014. All Rights Reserved. All other marks are trademarks of their respective holders. Printed in U.S.A. Snap-on, 2801 80th Street, Kenosha, WI 53143BS2014CNE

KRA2415 $4,275.00 $3,847.50 Classic 96 Top Chest (15 Drawers; 73" W)• Huge top compartment offers gas-assist flip lid

• Almost doubles storage space when added to a Classic roll cab

• Throw switch locks drawers independently from lid

KRA2496 $5,395.00 $4,855.50Classic 96 Roll Cab Series (12 Drawers; 73" W)

• 12 drawers in a variety of sizes for a high level of organization that provide plenty of space

• Bulk storage section with door offers space for larger power tools, paint guns, safety equipment and personal items

• Aluminum drawer pull trim/rolled edges on drawers/deep drawer pulls

• Corner gussets are welded into each corner to keep the unit square for a lifetime of use

• Heavy duty 14 gauge bottom panel with caster stiffener to support loads on rough floors

KMC18043NOR (Orange), KMC18043NGR (Green) & KMC18043NBK (Black) $795.00 each7 Drawer 18" All Weather Mobile Tool Chest• Waterproof and dust proof design

• Drawers fully extend on proprietary composite slides

• Telescoping trolley handle with higher reach

• Urethane casters for smooth rolling

KRA2496 & KRA2415 Available in 7 Colors

RED GLOSS ROYAL WHITE/W BLACK BLUE BLK TRIMPBO PC PCM PDC

EXTREME ELECTRIC FLAT BLACK GREEN ORANGE w/BLACK TRIM PJJ PJK POT

KRSC33A $975.00 3 Drawer 32" Roll Cart• Three 4" locking drawers

• Entirely welded body and legs for super strength versus bolt together units

• Large top compartment

• 5" x 2" swivel casters factory installed

• Factory assembled, welded tray and leg assembly

• Slots 'N DotsTM side panels for mounting accessories

• Available in 9 colors

CANDY MIDNIGHT RED GLOSS ROYAL ULTRA EXTREME ELECTRIC FLAT BLACK APPLE RED BLUE BLACK BLUE YELLOW GREEN ORANGE w/BLACK TRIM PJH PDG PBO PC PCM PES PJJ PJK POT

Documents

BodyShop2014 CNE Low