Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
BMW 1200GSBMW 1250GS
Remove
- Injector and Ignition cover
Remove
- Injector and Ignition cover
Remove
- Side Cover on Right Side
Remove
- Side Cover on Right Side
Route Harness
- TPS , Injection & Ignition Connect on Right side
Harness side with GND, TPS connection
Route Harness
- TPS , Injection & Ignition Connect on Right side
Route Harness
- TPS , Injection & Ignition Connect on Right side
Route Harness
- TPS , Injection & Ignition Connect on Right side
TPS
INJ 1
IGN 1
Route Harness
- Injection Connection
Route Harness
- Ignition Connection
Route Harness
- Ignition Connection
Location of the ECU
- Front Part of the Bike
Routing of the Harness
IGNITION
INJECTION
TPS
ECU
Routing of the Harness
Routing of the Harness
Fix harness to Frame
TPS
- Located on Right side. pull connector back
Press
TPS SIGNAL
- BLUE Wire (click on clamp)
Clamp BLUE wire trough here
GROUND
Connect Black wire to Battery Negative
GROUND
Connect Black wire to Battery Negative
Connect the ECU
WARNING
Fix the Harness and Connectors with zip tie
WARNING
Use Velcro Tape to fix the ECU
Connect the ECU
Page 1Page 2Page 3Page 4Page 5Page 6Page 7Page 8Page 9Page 10Page 11Page 12Page 13Page 14Page 15Page 16Page 17Page 18Page 19Page 20Page 21Page 22