Upload
dangdieu
View
249
Download
10
Embed Size (px)
Citation preview
BLUETOOTH BASED SECURITY ENABLED POWERED DEVICES CONTROL
SYSTEM
The project mainly aims in designing completely automated powered devices
control with the help of Bluetooth technology and a graphical LCD to display the status
of the devices and also provides a user friendly environment to operate the devices
effectively. It majorly aims in providing a reliable system for illiterates and old people
who finds difficulty in operating few high end devices like AC, water heaters etc.
Automation is the most frequently spelled term in the field of electronics. The
hunger for automation brought many revolutions in the existing technologies. These had
greater importance than any other technologies due to its user-friendly nature. These can
be used as a replacement of the existing switches in home which produces sparks and
also results in fire accidents in few situations. Considering the advantages of Bluetooth an
advanced automation system was developed to control the devices.
The device consists of a microcontroller, which is interfaced with the input and
output modules, the controller acts as an intermediate medium between both of them. So
the controller can be termed as a control unit. The input module is nothing but a
Bluetooth module, which takes the input from the user’s mobile phone with Bluetooth
features and provides the same to the microcontroller. The output module is graphical
LCD and the devices to be controlled. Here the microcontroller receives the input from
the Bluetooth and switches the device with respect to the input. The controller also takes
the responsibility to display the status of the individual devices on the graphical LCD.
The Microcontroller is programmed using Embedded C language.
www.mycollegeproject.com Ph: +91 9490219339, 040-23731030Ameerpet : A-8, 2 nd floor, Eureka court, beside Image hospital, Ameerpet, HYDERABAD 73.
Santoshnagar: Opp: Magna Hypermarket, Santoshnagar X-Roads, HYDERABAD – 59.
Features:
1. Bluetooth based user-friendly operation.
2. Low power consumption.
3. Controls high and low voltage devices.
4. Long life.
5. Highly sensitive.
This project provides exposure to the following technologies:
1. Bluetooth technology.
2. Mobile with Bluetooth interfacing with microcontroller.
3. Embedded C programming for microcontroller.
4. Design of PCB.
5. Graphical LCD interfacing to Microcontroller.
The major building blocks of this project are:
1. Regulated power supply.
2. Microcontroller.
3. Bluetooth module.
4. Graphical LCD with driver.
5. Crystal oscillator.
6. Reset.
7. LED indicators.
8. Relay with driver (interfacing Circuit).
9. Triac with driver (interfacing Circuit).
www.mycollegeproject.com Ph: +91 9490219339, 040-23731030Ameerpet : A-8, 2 nd floor, Eureka court, beside Image hospital, Ameerpet, HYDERABAD 73.
Santoshnagar: Opp: Magna Hypermarket, Santoshnagar X-Roads, HYDERABAD – 59.
Applications:
1. In industrial environment where combustibles are used.
2. For house hold automations.
Software’s used:
1. PIC-C compiler for Embedded C programming.
2. PIC kit 2 programmer for dumping code into Micro controller.
3. Express SCH for Circuit design.
4. Proteus for hardware simulation.
Regulated power supply:
www.mycollegeproject.com Ph: +91 9490219339, 040-23731030Ameerpet : A-8, 2 nd floor, Eureka court, beside Image hospital, Ameerpet, HYDERABAD 73.
Santoshnagar: Opp: Magna Hypermarket, Santoshnagar X-Roads, HYDERABAD – 59.
Block diagram:
www.mycollegeproject.com Ph: +91 9490219339, 040-23731030Ameerpet : A-8, 2 nd floor, Eureka court, beside Image hospital, Ameerpet, HYDERABAD 73.
Santoshnagar: Opp: Magna Hypermarket, Santoshnagar X-Roads, HYDERABAD – 59.