Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Blue Power Charger IP 65
Completely encapsulated: waterproof, shockproof and ignition protected.
Water, oil or dirt will not damage the Blue Power charger. The casing is made of cast aluminium
and the electronics are moulded in resin.
Blue Power Charger IP 20
Universal input: 90-265 VAC or 90-350 VDC:
The charger will operate on whatever supply is available. Adaptive 4-stage charge characteristic:
bulk – absorption – float – storage
Blue Power Charger IP 65 / IP 20
Blue Power ChargerIP65
12/7BPC012007100
12/17BPC012017100
24/3BPC024003100
24/12BPC024012100
Input voltage range / Frequency 200-265 Vac / 45-65 Hz
Charge voltage ‘absorption’ (V DC) 14,4 28,8
Charge voltage ‘float’ (V DC) 13.7 27.4
Charge voltage ‘storage’ (V DC) 13,2 26,4
Charge current (A) 7 17 3 12
Charge characteristic 3-stage with max, 18 hours absorption
Minimum battery capacity (Ah) 15 35 6 24
Operating temp. range -20 to +60°C (full rated output up to 40°C)
Protection category/Humidity IP 65 / Max 100 %
Weight (kg) 1,1 1,4 1,1 1,4
Dimensions (h x w x d in mm) 43 x 80 x 155 47 x 99 x193 43 x 80 x 155 47 x 99 x193
The Blue Power charger features a microprocessor controlled ‘adaptive’ battery management. The
‘adaptive’ feature will automatically optimise the charging process relative to the way the battery
is being used.
Blue Power ChargerIP20
12/7BPC120700000
12/10BPC121000000
12/15BPC121500000
24/5BPC240500000
24/8BPC240800000
Input voltage range / Frequency 90-265 VAC or 90-350 VDC / 45-65 Hz or DC
Charge voltage ‘absorption’ (V DC) 14,4 28,8
Charge voltage ‘float’ (V DC) 14 28
Charge voltage ‘storage’ (V DC) 13,2 26,4
Charge current (A) 7 10 15 5 8
Charge characteristic 4-stage adaptive
Minimum battery capacity (Ah) 24 36 55 24 36
Operating temp. range -20 to +60°C (full rated output up to 40°C)
Protection category/Humidity IP 20 / Max 95 %
Weight (kg) 1,3
Dimensions (h x w x d in mm) 50 x 85 x 200
Skylla-TG GMDSS (The Global Maritime Distress & Safety System)
The Victron Skylla-TG 24/30 and 24/50 GMDSS Chargers have been designed to provide all required
monitoring and alarm data. Both the battery and the GMDSS system are connected directly to the
charger. Data and alarms are displayed on a digital panel (VE.Net GMDSS panel, to be ordered
separately). A standard eight wire UTP cable connects the charger to the panel.
VE.Net GMDSS Panel
Perfect chargers for any type of battery.
The charge voltage can be precisely adjusted to suit any sealed or unsealed
battery system.
Suitable for AC and DC supply (AC-DC and DC-DC operation)
Except for the 3 phase input models, the chargers also accept a DC supply.
Controlled charging
Every TG charger has a microprocessor, which accurately controls the charging
in three steps. The charging process takes place in accordance with the IUoUo
characteristic and charges more rapidly than other processes.
Skylla TG Charger
Skylla TG-GMDSS
Two outputs to charge 2 battery banks
The TG chargers feature 2 isolated outputs. The second output, limited to
approximately 4 A and with a slightly lower output voltage, is intended to
top up a starter battery.
To increase battery life: temperature compensation
Every Skylla TG charger comes with a battery temperature sensor. When
connected, charge voltage will automatically decrease with increasing battery
temperature. This feature is especially recommended for sealed batteries
which otherwise might be overcharged and dry out due to venting.
Skylla Charger24/30 TG24/50 TG
24/50 TG3 phase
24/80 TG 24/100 TG24/100 TG
3 phase48/25 TG 48/50 TG
Input voltage range 185~2643 x 400
320~450185~264 185~264
3 x 400320~450
185~264 185~264
Charge voltage ‘absorption’(V DC)
28.5 57
Charge voltage ‘float’ (V DC) 26.5 53
Charge current (A)‘main battery’
30/50 50 80 100 100 25 50
Charge current (A) “starter battery”
4 n/a
Charge characteristic IUoUo (three step)
Battery capacity (Ah) 150~500 250~500 400~800 500~1000 500~1000 125~250 250~500
Remote alarm Potential free contacts 60V / 1A (1x NO and 1 x NC)
Weight (kg) 5.5 13 10 10 23 5.5 10
Dimensions (h x w x d in mm) 365x250x147 365x250x257 365x250x257 365x250x257 515x260x265 365x250x257 365x250x257
The Victron Energy Battery Protect disconnects the battery from non essential loads before it is
completely discharged (which would damage the battery) or before it has insufficient power left to
crank the engine.
Ignition proof - No relays but MOSFET switches, and therefore no sparks.
Over voltage protection - To prevent damage to your sensitive loads due to over voltage, the load
is disconnected whenever the DC voltage exceeds 16 V respectively 32 V.
Adaptive 4-stage charge characteristic: bulk – absorption – float – storage
The Phoenix charger features a microprocessor controlled ‘adaptive’ battery
management system that can be preset to suit different types of batteries. The
‘adaptive’ feature will automatically optimise the process relative
to the way the battery is being used.
The right amount of charge: variable absorption time
When only shallow discharges occur (a yacht connected to shore power for example) the absorption
time is kept short in order to prevent overcharging of the battery. After a deep discharge the
absorption time is automatically increased to make sure that the battery is completely recharged.
Preventing damage due to excessive gassing: the BatterySafe mode (see fig. 2 below)
If, in order to quickly charge a battery, a high charge current in combination with a high absorption
voltage has been chosen, the Phoenix charger will prevent damage due to excessive gassing by
automatically limiting the rate of voltage increase once the gassing voltage has been reached (see the
charge curve between 14,4 V and 15,0 V in fig. 2 below).
Three outputs that each can supply
the full output current
Phoenix Charger 12/30 12/50 24/16 24/25
Input voltage range / Frequency90-265 VAC or 90-400 VDC
/ 45-65 Hz or DC
Charge voltage ‘absorption’ (V DC) 14,4 28,8
Charge voltage ‘float’ (V DC) 13.8 27.6
Charge voltage ‘storage’ (V DC) 13,2 26,4
Charge current “main battery” (A) 30 50 16 25
Charge current “starter battery” (A) 4
Charge characteristic 4-stage adaptive
Battery capacity (Ah) 100~400 200~800 100~200100~400
Operating temp. range-20 to +60°C (full rated output up to
40°C)
Protection category/Humidity IP 21 / Max 95 %
Weight (kg) 3.8
Dimensions (h x w x d in mm) 350 x 200 x 108
Phoenix charger
Centaur charger
Centaur Charger 12/2012/3024/16
12/40 12/5012/6024/30
12/8024/40
12/10024/60
24/8012/20024/100
Input voltage range / Frequency
90-265 VAC or 90-400 VDC / 45-65 Hz or DC
Charge voltage ‘absorption’(V DC)
14,3 / 28,5
Charge voltage ‘float’ (V DC) 13,5 / 27,0
Charge current (A) 20 30/16 40 50 60/30 80/40 100/60 80 200/100
Total output ammeter Yes
Charge characteristic IUoU (Three stage charging)
Battery capacity (Ah) 80~200120~30045~150
160~400 200~500240~600120~300
320~800160~400
400~1000240~600
320~800800~2K400~1K
Weight (kg) 3.8 3.8 5 5 5 12 12 16 16
Dimensions (h x w x d in mm)355x215
x110355x215
x110426x239
x135426x239
x135426x239
x135505x255
x130505x255
x130505x255
x130505x255
x130
Three stage charging, with temperature compensation
The Centaur charges at bulk rate until the output has reduced to 70 % of the rated Amps, at which a 4
hour timer begins. After the timed period the charger switches to float rate.An internal temperature
sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell. A dip switch is
available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries.
Every Centaur
has three isolated
outputs to
simultaneously
charge 3 battery
banks and each
output is capable to
supply the full rated
current.