Blanket Insulation - Fiberglass · J.V. of Zamil Industrial & Owens Corning Corp. Thickness Width Length Densities mm inch mm inch m ft kg/m 3lb/ft 25 1 400 16 10 to 36 33 to 120

DESCRIPTION

Quiet Liner is a highly efficient resilient fiber insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire-retardant thermosetting and heat resistant resin.

It is free from coarse fiber and shot due to its mineral composition.

FACING

Quiet Liner is supplied in rolls and boards with a strong, dimensionally stable black Woven Glass Fiber Fabric (WGF).

STANDARD AVAILABLE PRODUCTS

Nominal Manufacturing Specifications.Check for availability other dimensions and densities.

NOMINAL THERMAL CONDUCTIVITY

“K” or “ ” value at mean temperatures (ASTM C 518) W/m.°C-Btu.in./ft2.hr°F (BS 874)

Technical Data SheetProduct Code: DLB

APPLICATION

Quiet Liner is intended for use in commercial, industrial and residential construction as thermal and acoustical insulation of heating, air-conditioning and interior of dual temperature duct work , air handling equipment and plenum operating at air velocities up to 30 m/s (6000 FM) and temperatures to °260C (°500F).

Also used as an efficient sound absorption treatment of walls and ceilings, acoustic enclosures, generator rooms, studios, curtain wal ls, auditoriums, conference rooms, theaters and others.

Member ofAffiliate of

* Standard Products and Sizes

Quiet Liner

Product Type AQL

Product Type AQL

Mean Temperature

160 240 320 480 640 720 800 960

0 °C 0.034 0.031 0.030 0.029 0.030 0.031 0.030 0.030

10 °C 0.036 0.032 0.031 0.030 0.031 0.033 0.031 0.031

24 °C 0.039 0.035 0.033 0.031 0.032 0.035 0.032 0.032

50 °C 0.044 0.039 0.037 0.035 0.036 0.037 0.036 0.036

75 °C 0.051 0.043 0.040 0.037 0.038 0.040 0.039 0.039

100 °C 0.057 0.047 0.044 0.041 0.042 0.043 0.043 0.043

Mean Temperature

160 240 320 480 640 720 800 960

32 °F 0.23 0.21 0.20 0.20 0.21 0.21 0.21 0.21

50 °F 0.25 0.22 0.21 0.21 0.21 0.23 0.21 0.21

75 °F 0.27 0.24 0.23 0.22 0.23 0.23 0.22 0.22

122 °F 0.31 0.27 0.25 0.24 0.24 0.26 0.25 0.25

167 °F 0.35 0.30 0.27 0.26 0.26 0.28 0.27 0.27

212 °F 0.40 0.33 0.30 0.29 0.29 0.30 0.30 0.30

Product Type AQL Density

kg/m3 lbs/ft3

160 16 1.0

240* 24 4.5

320 32 2.0

480* 48 3.0

640* 64 4.0

720 72 4.5

800 80 5.0

960 96 6.0

Thickness Width Length

15mm / 0.5 in

1.2 m

4.0 ft

Roll

20 mor

65 ft

Board

0.6 m / 2.0 ft

1 m / 3.3 ft2.4 m / 8.0 ft

25mm / 1 in

38mm / 1.5 in

50mm / 2 in

Arabian Fiberglass Insulation Company Ltd.J.V. of Zamil Industrial & Owens Corning Corp.

Thickness Width Length Densities

mm inch mm inch m ft kg/m3 lb/ft3

25 1 400 16 10

to

36

33

to

120

10-12 0.625-0.75

38 1 ½ 410 16

50 2 600 24

64 2 ½ 610 24

75 3 1200 48

89 3 ½ 1220 48

Depending

on thickness100 4

150 6

Thickness Thermal conductivity(K)

Thermal resistance(R)

mm inch W/m.°C Btu.in/hr.ft2 °F m2.°C/W hr.ft2.°F/Btu

25 1 0.040 0.28 0.63 4

38 1 ½ 0.040 0.28 0.95 5

50 2 0.040 0.28 1.25 7

64 2 ½ 0.040 0.28 1.60 9

75 3 0.040 0.28 1.88 11

89 3 ½ 0.040 0.28 2.23 13

100 4 0.040 0.28 2.50 14

150 6 0.040 0.28 3.75 21

DESCRIPTION

Blanket Insulation is a highly efficient, light weight, strong, resilient and easy to handle flexible blanket insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire retardant thermosetting and heat resistant resin.


FACING

Blanket Insulation is available unfaced, or laminated with factory-applied Kraft Paper, Vinyl or Aluminum Foil Glass Reinforced Kraft (FRK) or other specific vapor barriers to prevent condensation.

STANDARD NOMINAL DIMENSIONS

Check for availability of other dimensions and densities.


(at 24°C or 75°F mean temperature) (ASTM C 518) (BS 874)

APPLICATION

Blanket Insulation is intended for use in commercial, institutional, industrial, agricultural and residential construction as thermal and acoustical insulation for the interior, exterior and cavity walls applications, partitions, prefabricated houses, poultry farms, ceilings and as back loading of existing ceiling systems.

DENSITY

10 kg/m3 (0.625 pcf)



Blanket Insulation

Technical Data SheetProduct Code: BKT




25 1 400 16 10

to

36

33

to

120

10-12 0.625-0.75

38 1 ½ 410 16

50 2 600 24

64 2 ½ 610 24

75 3 1200 48

89 3 ½ 1220 48

Depending

on thickness100 4

150 6




25 1 0.040 0.28 0.63 4

38 1 ½ 0.040 0.28 0.95 5

50 2 0.040 0.28 1.25 7

64 2 ½ 0.040 0.28 1.60 9

75 3 0.040 0.28 1.88 11

89 3 ½ 0.040 0.28 2.23 13

100 4 0.040 0.28 2.50 14

150 6 0.040 0.28 3.75 21

DESCRIPTION



FACING






APPLICATION


DENSITY

10 kg/m3 (0.625 pcf)



Blanket Insulation


Duct Liner Board (DLB)

Duct Liner Board is a highly efficient, semi-rigid insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire retardant thermosetting and heat resistant resin. It is free from coarse fibers and shot due to its mineral composition.

Duct Liner Board is supplied semi-rigid and rigid faced with a strong, dimensionally stable Non-Woven Black Glass Tissue (BGT).




25 1 400 16 10

to

36

33

to

120

10-12 0.625-0.75

38 1 ½ 410 16

50 2 600 24

64 2 ½ 610 24

75 3 1200 48

89 3 ½ 1220 48

Depending

on thickness100 4

150 6




25 1 0.040 0.28 0.63 4

38 1 ½ 0.040 0.28 0.95 5

50 2 0.040 0.28 1.25 7

64 2 ½ 0.040 0.28 1.60 9

75 3 0.040 0.28 1.88 11

89 3 ½ 0.040 0.28 2.23 13

100 4 0.040 0.28 2.50 14

150 6 0.040 0.28 3.75 21

DESCRIPTION



FACING






APPLICATION


DENSITY

10 kg/m3 (0.625 pcf)



Blanket Insulation


Duct Liner Board is intended for use in commercial, institutional, industrial and residential construction as thermal and acoustical insulation of heating air-conditioning and interior of dual temperature duct work, air handling equipment and plenums operating at air-velocities up to 30 m/s (6000 FPM) and temperatures up to 260°C (500°F).

Also used as an efficient sound absorption treatment of walls and ceilings, acoustic enclosures, generator rooms, studios, curtain walls, auditoriums, conference rooms, theaters and others.

ArabianFiberglassInsulationCompanyLtd.

J.V.ofGulfInsulationGroup(AZamilIndustrialSubsidiary)&OwensCorningCorp.

الشركة العربية للمواد العازله من الفايربجالس احملدودة

شراكة اسرتاتيجية بني جمموعة العزل اخلليجية )إحدى قطاعات الزامل للصناعة( وشركة أوينز كورننج

GulfInsulationGroup

Nominal Manufacturing Specifications.Check for availability of other dimensions and densities

ProductTypeQLB

Density Thickness Width Length

kg/m3 lb/ft3 mm inch m ft m ft

480 48 3.0 15 1/2 1.2 4 0.6 2

25 1 1.2 4 1.0 3.338 11/

2 1.2 4 2.4 850 2 1.2 4

560 56 3٫5 15 1/2 1.2 4 0.6 2

25 1 1.2 4 1.0 3.338 11/

2 1.2 4 2.4 850 2 1.2 4

640 64 4٫0 15 1/2 1.2 4 0.6 2

25 1 1.2 4 1.0 3.338 11/

2 1.2 4 2.4 850 2 1.2 4

720 72 4٫5 15 1/2 1.2 4 0.6 2

25 1 1.2 4 1.0 3.338 11/

2 1.2 4 2.4 850 2 1.2 4

800 80 5.0 15 1/2 1.2 4 0.6 2

25 1 1.2 4 1.0 3.338 11/

2 1.2 4 2.4 850 2 1.2 4

960 96 6٫0 15 1/2 1.2 4 0.6 2

25 1 1.2 4 1.0 3.338 11/

2 1.2 4 2.4 850 2 1.2 4

STANDARD AVAILABLE PRODUCTS

Performance & Physical Characteristics

Quiet LinerTechnical Data SheetProduct Code: AQL

Surface Burning Characteristics(UL 723, ASTM E 84, ASTM E 136)

Base glass fiber is non-combustible when tested to ASTM E84.

Alkalinity

pH 9

Thermal Resistance “R” Value (Excluding Facing)(ASTM C 167)

“R” is a measure of the resistance to heat flow of a material of any given thickness. (“R” = m2. °C/W or hr. ft2. °F/Btu.)

R = where “T” = thickness and “K” or “ ” = thermal conductivity

Working Temperature Limitations (ASTM C 411)

Operating up to °260C (°500F) for the WGF faced product. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with hot surface. This in no way impairs the performance of the insulation.

Mold Growth (ASTM D 2020, UL 181)

Does not breed or sustain mold, fungus, bacteria or rodents.

Corrosiveness (ASTM C 665)

Chemically inert. Will not cause or accelerate corrosion of steel, stainless steel, copper or aluminum, due to its particular inorganic and mineral composition.

Moisture Absorption (ASTM D07- B, ASTM C 553)

In conditions of %95 relative humidity at °49C for 96 hours, moisture absorption is less than %0.2 by volume, when tested in accordance with ASTM C 533. fiberglass products do not absorb moisture from the ambient air nor water by capillary attraction, only water under pressure can enter the insulation products but that will quickly dry out owing to the material’s open cell structure.

Specification Compliance

Quiet Liner Insulation complies with the property requirements of the following specifications:

• ASTM C 1071: For Acoustical Performance• NFPA 90 A: For Fire Resistance

• DCL ASTM - C 533 - C 547 - C 612 - C 665• CE-EN 13162

Friction Loss

According to TIMA AHS152-T Pressure loss, in W.G., Fiberglass Quiet Liner.

This chart is to be used in place of the standard friction loss chart published in the ASHRAE Handbook of fundamentals. For conversion of round equivalents to rectangular sizes, use Table C2- “Circular Equivalents of Rectangular Ducts for Equal Friction and Capacity” from the same reference. Tests conducted in accordance with TIMA AHS 152T.

Facing FlameSpread

Smoke Developed

FuelContributed

WGF 25 50 0

T

K

10090 80 70

60 56 5248

44

40

36

32

28

24

20

18

16

14

12

10

9

8

7

6

5

4

DIA

6000

5500

50004500

400035003000

2800

2600

2400

2200

2000

1800

1600

140012001000900800700600500400

300FPM

100000

80000

60000

50000

40000

30000

20000

10000

8000

6000

5000

4000

3000

2000

1000

800

600500

400300

200

100

0.01 0.02 0.03 0.04 0.06 0.08 0.1 0.2 0.3 0.4 0.4 0.8

Pressure loss, Inches W .G. per 100 feet of duct

1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0

Flow

Rat

e, C

FM

Equivalent diameter dh (m)

0,10 0,15 0,20 0,30 0,40 0,50 0,60 0,70 1,00 1,50 2,00a(m)

1,50

1,000,900,80

0,70

0,60

0,50

0,40

0,30

0,20

0,15

0,10

b(m)

1,00

0,80

0,60

0,50

0,40

0,30

0,25

0,200,175

0,15

0,125

0,10

a

b

Equivalent diameter dh (m) = mm2 (a x b)

a + b

Nominal Thermal Conductivity

Thermal Resistance “R” Value (Excluding Facings) (ASTM C 167)

“R” is a measure of the resistance to heat flow of a material of any given thickness.(“R” = m2·°K/W or hr·ft2·°F/Btu)

R = T where “T” = Thickness K and “K” or “λ” = Thermal Conductivity


The U value is the reciprocal of the sum of the resistances of the component of the structure plus the resistance of the surfaces and any cavities within the structure.


-4°C to +260°C. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with the hot surface. This in no way impairs the performance of the insulation.

Alkalinity (ASTM C 871)

pH 9





Moisture Absorption (ASTM D-07 B, ASTM C 553)

In conditions of 95% relative humidity at 49°C for 96 hours, moisture absorption is less than 0.2% by volume, when tested in accordance with ASTM C 533. fiberglass products do not absorb moisture from the ambient air nor water by capillary attraction, only water under pressure can enter the insulation products but that will quickly dry out owing to the material’s open cell structure.

Vapor Permeability (ASTM E96A)

KRAFT 1.00 PERMFRK 0.02 PERM

Puncture Resistance (ASTM D 781)

FRK 25 Units

Compressive Strength

PCF AT 10% DEFORMATION 5PCF AT 25% DEFORMATION 10



Thermal Resistance “R” Value (Unfaced) (ASTM C 167)

“R” is a measure of the resistance to heat flow of a material of any given thickness. (“R” = m2.°C/W or hr. ft2.°F/Btu.)


Thermal Conductance, “C”- Value (ASTM C 518, ASTM C 177)

C = = W/m2.°C or Btu/hr.ft2.°F.

It is the ability of the product to conduct heat.

Thermal Transmittance (U Value)

Thermal transmittance is the rate of heat flow through unit area of a wall system when unit temperature difference exists between air on each side of the structure.

Fire Properties

B.S. 476 PART 4 – Non-combustibleB.S. 476 PART 5 – IgnitabilityB.S. 476 PART 6 – Fire propagationB.S. 476 PART 7 – Surface spread of flameClass ‘O’ fire rating to the building regulations section E15


Blanket Installation complies with the property requirements of the following specifications:•UNFACED - U.S. Federal spec. HH-I-521 E Type I•KRAFT FACED - U.S. Federal Spec. HH-I-521 E Type II, Class C•FRK FACED - U.S. Federal Spec. HH-I-521 F, Type III, Class A, ASTM C 665•DCL ASTM - C 533 - C 547 - C 612 - C 665•CE-EN 13162

Acoustical Performance (ASTM C 423)

Sound Absorption Coeffecients at Frequencies (Hz)

Table 1-1Sound Absorption Coeffecients

Fiberglass Blanket Insulation

1R

Product Type & Thickness

Mounting(1)

Sound Absorption CoefficientsOctave Band Center Frequencies, Hz

125 250 500 1000 2000 4000 NRC

3.5” (R-11), insulation exposed to sound A .34 .85 1.09 .97 .97 1.12 .95

6.0” (R-19), insulation exposed to sound A .64 1.14 1.09 .99 1.00 1.21 1.05

3.5” (R-11), insulation exposed to sound E-405 .80 .98 1.01 1.04 .98 1.15 1.00

6.0” (R-19), insulation exposed to sound E-405 .86 1.03 1.13 1.02 1.04 1.13 1.05

3.5” (R-19) FRK facing exposed to sound A .56 1.11 1.16 .61 .40 .21 .80

6.0” (R-19), FRK facing exposed to sound A .94 1.33 1.02 .71 .56 .39 .90

Facing FlameSpread

Smoke Developed

FuelContributed

FRK 0 0 0

1

Rso + R1 + R2 + R3 + RsiHere U =

Rso = Outside surface resistanceR1 = External sheetingR2 = AFICO insulationR3 = Internal sheeting or lining if anyRsi = Inside surface resistance Rso R1 R2 R3 Rsi

T

K


Blanket InsulationTechnical Data SheetProduct Code: BKT


Operating temperature up to 260°C (500°F) for the BGT faced product. At excessive temperatures, limited migration of binder may occur in the insulation in contact with the surface. This is in no way impairs the performance of the insulation.


Does not breed or sustain mold, fungus, bacteria or rodents



Alkalinity

pH 9

Friction Loss

According to TIMA AHS-152T Pressure loss, in W.G., Duct Liner Board.

This chart is to be used in place of the standard friction loss chart published in the ASHRAE Handbook of fundamentals.

For conversion of round equivalents to rectangular sizes, use Table C-2 “Circular Equivalents of Rectangular Ducts for Equal Friction and Capacity” from the same reference. Tests conducted in ac-cordance with TIMA AHS 152T.

Surface Burning Characteristics(ASTM E 84, UL 723)

Base glass fiber is non-combustible when tested to ASTM E 84.

FacingFlameSpread

SmokeDeveloped

FuelContributed

BGT 25 50 0


Duct Liner Board insulation complies with the property requirements of the following specifications:ASTM C 1071 : For Acoustical PerformanceNEPA 90 A : For Fire ResistanceDCL : ASTM C 612CE-EN : 1121-CPD-BA0137

Performance & Physical Characteristics Performance & Physical Characteristics





Alkalinity

pH 9





Operating up to 260°C (500°F) for the WGF faced product. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with hot surface. This in no way impairs the performance of the insulation.








Quiet Liner Insulation complies with the property requirements of the following specifications:• U.S. Federal Specification HH-I-545 B, TYPE I• ASTM C 1071: For Acoustical Performance• NFPA 90 A: For Fire Resistance• NFPA 255: For Fire Hazard Classification• BS 476: parts 6,7 Class O Fire Classification• DCL ASTM - C 533 - C 547 - C 612 - C 665• CE-EN 13162

Friction Loss

According to TIMA AHS-152T Pressure loss, in W.G., Fiberglass Quiet Liner.

This chart is to be used in place of the standard friction loss chart published in the ASHRAE Handbook of fundamentals. For conversion of round equivalents to rectangular sizes, use Table C-2 “Circular Equivalents of Rectangular Ducts for Equal Friction and Capacity” from the same reference. Tests conducted in accordance with TIMA AHS 152T.

Facing FlameSpread

Smoke Developed

FuelContributed

WGF 25 50 0

T

K

10090 80 70

60 56 5248

44

40

36

32

28

24

20

18

16

14

12

10

9

8

7

6

5

4

DIA

6000

5500

50004500

400035003000

2800

2600

2400

2200

2000

1800

1600

140012001000900800700600500400

300FPM

100000

80000

60000

50000

40000

30000

20000

10000

8000

6000

5000

4000

3000

2000

1000

800

600500

400300

200

100

0.01 0.02 0.03 0.04 0.06 0.08 0.1 0.2 0.3 0.4 0.4 0.8


1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0

Flow

Rat

e, C

FM


0,10 0,15 0,20 0,30 0,40 0,50 0,60 0,70 1,00 1,50 2,00a(m)

1,50

1,000,900,80

0,70

0,60

0,50

0,40

0,30

0,20

0,15

0,10

b(m)

1,00

0,80

0,60

0,50

0,40

0,30

0,25

0,200,175

0,15

0,125

0,10

a

b


a + b

Performance & Physical Characteristics Performance & Physical Characteristics





Alkalinity

pH 9





Operating up to 260°C (500°F) for the WGF faced product. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with hot surface. This in no way impairs the performance of the insulation.








Quiet Liner Insulation complies with the property requirements of the following specifications:• U.S. Federal Specification HH-I-545 B, TYPE I• ASTM C 1071: For Acoustical Performance• NFPA 90 A: For Fire Resistance• NFPA 255: For Fire Hazard Classification• BS 476: parts 6,7 Class O Fire Classification• DCL ASTM - C 533 - C 547 - C 612 - C 665• CE-EN 13162

Friction Loss

According to TIMA AHS-152T Pressure loss, in W.G., Fiberglass Quiet Liner.

This chart is to be used in place of the standard friction loss chart published in the ASHRAE Handbook of fundamentals. For conversion of round equivalents to rectangular sizes, use Table C-2 “Circular Equivalents of Rectangular Ducts for Equal Friction and Capacity” from the same reference. Tests conducted in accordance with TIMA AHS 152T.

Facing FlameSpread

Smoke Developed

FuelContributed

WGF 25 50 0

T

K

10090 80 70

60 56 5248

44

40

36

32

28

24

20

18

16

14

12

10

9

8

7

6

5

4

DIA

6000

5500

50004500

400035003000

2800

2600

2400

2200

2000

1800

1600

140012001000900800700600500400

300FPM

100000

80000

60000

50000

40000

30000

20000

10000

8000

6000

5000

4000

3000

2000

1000

800

600500

400300

200

100

0.01 0.02 0.03 0.04 0.06 0.08 0.1 0.2 0.3 0.4 0.4 0.8


1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0

Flow

Rat

e, C

FM


0,10 0,15 0,20 0,30 0,40 0,50 0,60 0,70 1,00 1,50 2,00a(m)

1,50

1,000,900,80

0,70

0,60

0,50

0,40

0,30

0,20

0,15

0,10

b(m)

1,00

0,80

0,60

0,50

0,40

0,30

0,25

0,200,175

0,15

0,125

0,10

a

b


a + b

Duct Liner BoardTechnical Data SheetProduct Code: DLB

W/m·°K or Btu·in/hr·ft2·°F (ASTM C 518)“K” or “λ” value at mean temperatures

Type0°C

32°F

10°C

50°F

24°C

75°F

50°C

122°F

75°C

167°F

100°C

212°F

480 0.029 0.20 0.030 0.21 0.031 0.22 0.035 0.24 0.037 0.26 0.041 0.29

560 0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.24 0.038 0.26 0.042 0.29

640 0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.24 0.038 0.26 0.042 0.29

720 0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30

800 0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30

960 0.030 0.21 0.031 0.21 0.032 0.22 0.036 0.25 0.039 0.27 0.043 0.30


Arabian Fiberglass Insulation Company Ltd.

Acoustical Performance (ASTM C 777-423)

Reverberation Chamber MethodSound Absorption Coefficients at Frequencies (Hz)

Installation Recommendation for flexible blanket

Quiet Liner Products are available in roll and board types. The desired application length can be easily measured and cut from the full size. Quiet Liner is applied to the interior

Product SoundAbsorption coefficient at one third octave

center frequencies (Hz)

TypeThickness

125 250 500 1000 2000 4000 NRCmm w

AQL 16025 1 0.09 0.24 0.49 0.85 0.83 0.77 0.60

50 2 0.34 0.59 0.93 0.94 0.94 0.98 0.85

AQL 24025 1 0.12 0.32 0.70 0.93 0.95 0.99 0.75

50 2 0.27 0.69 1.01 1.07 1.06 1.05 0.95

AQL 320

15 ½ 0.05 0.13 0.32 0.65 0.79 0.93 0.45

25 1 0.29 0.45 0.77 1.00 0.93 0.96 0.80

50 2 0.37 0.92 1.04 1.14 1.13 1.01 1.05

AQL 480

15 ½ 0.05 0.12 0.29 0.51 0.68 0.80 0.40

25 1 0.22 0.52 0.73 0.98 1.02 1.00 0.80

50 2 0.30 0.85 1.03 1.07 1.06 1.00 1.00

AQL 64025 1 0.06 0.19 0.62 0.83 0.90 0.95 0.65

50 2 0.21 0.75 1.00 1.00 1.00 0.95 0.95

of ducts and plenums with the black surface facing the air stream. Transverse joints are to be neatly butted, with no interruptions or gaps. Longitudinal to be overlapped and compressed.

Quiet Liner should be adhered to sheet metal ducts with %100 coverage of adhesive, and all exposed leading edges and all transverse joints coated with adhesive. (The adhesive shall conform to standard ASC-A7001 C1972- or as approved by the project consultant). The liner should be additionally secured with mechanical fasteners which will compress the product sufficiently to hold it firmly in place.

For velocities to 10 m/s: fasteners should start within 75 mm of the upstream transverse edges of the liner and 75 mm from longitudinal joints, and should be spaced at maximum of 300 mm from the corner break. Elsewhere, they should be a maximum 450 mm on centers except to be placed not more than 150 mm from a longitudinal joint and 300 mm from a corner break.

For velocities from 10 to 20 m/s: fasteners should be placed as above, except to be spaced at a maximum of 150 mm from the corner break. Elsewhere, they should be a maximum of 400 mm on centers except to be placed not more than 150 mm from the longitudinal joint and 300 mm from the corner break. In addition to the edge coating of transverse joints, longitudinal joints should be similarly coated with adhesive. For velocities from 20 to 30 m/s, fasteners should be similarly spaced as for 10 to 20 m/s. In addition, metal nosing should be installed to secure the liner at all upstream transverse edges.

The velocity rated side of liner must face the air flow.

Liner adhered to the conduct with %90 min. area coverage of adhesive.

No. Pins

Liner Interior Width

0 8” dn

2 16 -“9”

3 28 - “17”

4 40 - “29”

5 52 - “41”

6 64 - “53”

7 76 - “65”

8 88 - “77”

9 100 - “89”

When velocity exceeds 4000 FPM use metal nosing on every leading edge. Nosing may be formed on duct or by channel or Zee attach by screws, rivets or welds.

Maximum spacing for fasteners.Actual intervals are approximate.

VelocityDimensions

A B C D

2500 - 0 FPM 3” 12” 4” 18”

6000 - 2501 FPM 3” 6” 4” 16”

Alternatefoldedcorner

All transverseedges to becoated with

adhesiveDuct

section(typically)

4 Ft. or 5 Ft.)

A

D

D

A

B

B

CC

B

C

Lapped and butted corner

AIR FLOW

DETAIL - A




The U value is the reciprocal of the sum of the resistances of the component of the structure plus the resistance of the surfaces and any cavities within the structure.


-4°C to +260°C. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with the hot surface. This in no way impairs the performance of the insulation.

Alkalinity (ASTM C 871)

pH 9







Vapor Permeability (ASTM E96A)

KRAFT 1.00 PERMFRK 0.02 PERM

Puncture Resistance (ASTM D 781)

FRK 25 Units

Compressive Strength

PCF AT 10% DEFORMATION 5PCF AT 25% DEFORMATION 10



Thermal Resistance “R” Value (Unfaced) (ASTM C 167)

“R” is a measure of the resistance to heat flow of a material of any given thickness. (“R” = m2.°C/W or hr. ft2.°F/Btu.)


Thermal Conductance, “C”- Value (ASTM C 518, ASTM C 177)

C = = W/m2.°C or Btu/hr.ft2.°F.

It is the ability of the product to conduct heat.

Thermal Transmittance (U Value)

Thermal transmittance is the rate of heat flow through unit area of a wall system when unit temperature difference exists between air on each side of the structure.

Fire Properties

B.S. 476 PART 4 – Non-combustibleB.S. 476 PART 5 – IgnitabilityB.S. 476 PART 6 – Fire propagationB.S. 476 PART 7 – Surface spread of flameClass ‘O’ fire rating to the building regulations section E15


Blanket Installation complies with the property requirements of the following specifications:•UNFACED - U.S. Federal spec. HH-I-521 E Type I•KRAFT FACED - U.S. Federal Spec. HH-I-521 E Type II, Class C•FRK FACED - U.S. Federal Spec. HH-I-521 F, Type III, Class A, ASTM C 665•DCL ASTM - C 533 - C 547 - C 612 - C 665•CE-EN 13162


Sound Absorption Coeffecients at Frequencies (Hz)

Table 1-1Sound Absorption Coeffecients

Fiberglass Blanket Insulation

1R

Product Type & Thickness

Mounting(1)

Sound Absorption CoefficientsOctave Band Center Frequencies, Hz

125 250 500 1000 2000 4000 NRC

3.5” (R-11), insulation exposed to sound A .34 .85 1.09 .97 .97 1.12 .95

6.0” (R-19), insulation exposed to sound A .64 1.14 1.09 .99 1.00 1.21 1.05

3.5” (R-11), insulation exposed to sound E-405 .80 .98 1.01 1.04 .98 1.15 1.00

6.0” (R-19), insulation exposed to sound E-405 .86 1.03 1.13 1.02 1.04 1.13 1.05

3.5” (R-19) FRK facing exposed to sound A .56 1.11 1.16 .61 .40 .21 .80

6.0” (R-19), FRK facing exposed to sound A .94 1.33 1.02 .71 .56 .39 .90

Facing FlameSpread

Smoke Developed

FuelContributed

FRK 0 0 0

1

Rso + R1 + R2 + R3 + RsiHere U =

Rso = Outside surface resistanceR1 = External sheetingR2 = AFICO insulationR3 = Internal sheeting or lining if anyRsi = Inside surface resistance Rso R1 R2 R3 Rsi

T

K




Arabian Fiberglass Insulation Company Ltd.

Acoustical Performance (ASTM C 777-423)


Installation Recommendation for flexible blanket

Quiet Liner Products are available in roll and board types. The desired application length can be easily measured and cut from the full size. Quiet Liner is applied to the interior

Product SoundAbsorption coefficient at one third octave

center frequencies (Hz)

TypeThickness

125 250 500 1000 2000 4000 NRCmm w

AQL 16025 1 0.09 0.24 0.49 0.85 0.83 0.77 0.60

50 2 0.34 0.59 0.93 0.94 0.94 0.98 0.85

AQL 24025 1 0.12 0.32 0.70 0.93 0.95 0.99 0.75

50 2 0.27 0.69 1.01 1.07 1.06 1.05 0.95

AQL 320

15 ½ 0.05 0.13 0.32 0.65 0.79 0.93 0.45

25 1 0.29 0.45 0.77 1.00 0.93 0.96 0.80

50 2 0.37 0.92 1.04 1.14 1.13 1.01 1.05

AQL 480

15 ½ 0.05 0.12 0.29 0.51 0.68 0.80 0.40

25 1 0.22 0.52 0.73 0.98 1.02 1.00 0.80

50 2 0.30 0.85 1.03 1.07 1.06 1.00 1.00

AQL 64025 1 0.06 0.19 0.62 0.83 0.90 0.95 0.65

50 2 0.21 0.75 1.00 1.00 1.00 0.95 0.95

of ducts and plenums with the black surface facing the air stream. Transverse joints are to be neatly butted, with no interruptions or gaps. Longitudinal to be overlapped and compressed.

Quiet Liner should be adhered to sheet metal ducts with %100 coverage of adhesive, and all exposed leading edges and all transverse joints coated with adhesive. (The adhesive shall conform to standard ASC-A7001 C1972- or as approved by the project consultant). The liner should be additionally secured with mechanical fasteners which will compress the product sufficiently to hold it firmly in place.

For velocities to 10 m/s: fasteners should start within 75 mm of the upstream transverse edges of the liner and 75 mm from longitudinal joints, and should be spaced at maximum of 300 mm from the corner break. Elsewhere, they should be a maximum 450 mm on centers except to be placed not more than 150 mm from a longitudinal joint and 300 mm from a corner break.

For velocities from 10 to 20 m/s: fasteners should be placed as above, except to be spaced at a maximum of 150 mm from the corner break. Elsewhere, they should be a maximum of 400 mm on centers except to be placed not more than 150 mm from the longitudinal joint and 300 mm from the corner break. In addition to the edge coating of transverse joints, longitudinal joints should be similarly coated with adhesive. For velocities from 20 to 30 m/s, fasteners should be similarly spaced as for 10 to 20 m/s. In addition, metal nosing should be installed to secure the liner at all upstream transverse edges.

The velocity rated side of liner must face the air flow.

Liner adhered to the conduct with %90 min. area coverage of adhesive.

No. Pins

Liner Interior Width

0 8” dn

2 16 -“9”

3 28 - “17”

4 40 - “29”

5 52 - “41”

6 64 - “53”

7 76 - “65”

8 88 - “77”

9 100 - “89”

When velocity exceeds 4000 FPM use metal nosing on every leading edge. Nosing may be formed on duct or by channel or Zee attach by screws, rivets or welds.

Maximum spacing for fasteners.Actual intervals are approximate.

VelocityDimensions

A B C D

2500 - 0 FPM 3” 12” 4” 18”

6000 - 2501 FPM 3” 6” 4” 16”

Alternatefoldedcorner

All transverseedges to becoated with

adhesiveDuct

section(typically)

4 Ft. or 5 Ft.)

A

D

D

A

B

B

CC

B

C

Lapped and butted corner

AIR FLOW

DETAIL - A

Installation Recommendation for Board Duct Liner Board is applied to the interior of ducts and plenums with the black surface facing the air stream.

Transverse joints are to be neatly butted, with no interruptions or gaps. Longitudinal corner joints are to be overlapped and tight. Top pieces are to be supported by side pieces.

Duct Liner Board should be adhered to sheet metal ducts with 100% coverage of adhesive. The adhesive shall conform to standard ASC-A7001C-1972 or as approved by the project consul-tant. In addition, mechanical fasteners should be used according to the following schedule:

For velocities to 10 m/s: On horizontal runs where duct width or height exceeds 500 mm, the liner should transverse edges and spaced at a maximum of 375 mm on centers and 375 mm from longitudinal joints. On vertical runs, fasteners should be similarly spaced where either dimension exceeds 300 mm.

For velocities from 10 to 20 m/s: On horizontal runs where duct width exceeds 300 mm or duct height exceeds 400 mm, the liner should be secured with fasteners starting within 75 mm of the upstream transverse edges and spaced at maximum of 375 mm on centers and 375 mm from longitudinal joints.

On vertical runs, fasteners should be similarly spaced where either dimension exceeds 300 mm.

For velocities up to 20 to 30 m/s: Same as for 10 to 20 m/s, except that fasteners should be spaced at a maximum of 300 mm on centers and metal nosing should be installed to secure liner at all upstream transverse edges.

TypeThickness

125 250 500 1000 2000 4000 NRCmm inch

480

15 ½ 0.18 0.43 0.42 0.52 0.62 0.71 0.50

25 1 0.14 0.52 0.73 0.96 1.10 1.09 0.85

38 1 ½ 0.25 0.72 1.05 1.04 1.02 1.08 0.95

50 2 0.31 0.81 1.16 1.09 1.06 1.13 1.05

560

25 1 0.09 0.22 0.63 0.86 0.86 0.96 0.65

38 1 ½ 0.15 0.57 0.95 0.99 0.87 0.93 0.85

50 2 0.28 0.81 1.04 1.10 1.06 1.09 1.00

640

25 1 0.09 0.22 0.63 0.86 0.86 0.96 0.65

38 1 ½ 0.15 0.57 0.95 0.99 0.87 0.93 0.85

50 2 0.28 0.81 1.04 1.10 1.06 1.09 1.00

720

25 1 0.09 0.30 0.75 0.87 0.92 1.00 0.70

38 1 ½ 0.14 0.65 0.97 0.98 0.81 0.92 0.85

50 2 0.25 0.74 1.17 1.13 1.06 1.07 1.05

800

25 1 0.09 0.30 0.75 0.87 0.92 1.00 0.70

38 1 ½ 0.14 0.65 0.97 0.98 0.81 0.92 0.85

50 2 0.25 0.74 1.17 1.13 1.06 1.07 1.05

960

25 1 0.06 0.26 0.77 0.96 1.01 1.07 0.75

38 1 ½ 0.22 0.72 1.03 1.07 0.95 1.00 0.95

50 2 0.48 0.82 1.21 1.10 1.02 1.05 1.05

[email protected] www.afico.com.sa

For more information call the insulation professionals:

H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: 1519 847 / 2901 847 3 966+ Fax: 3605 847 3 966+ E-mail: [email protected]

Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: 5555 472 1 966+ ext. 283 Fax: 0162 291 1 966+ E-mail: [email protected]

Jeddah office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: 0020 670 2 966+ ext. 133 Fax: 2283 287 2 966+ E-mail:

Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: 1211 294 4 971+ Fax: 1168 294 4 971+ E-mail: [email protected]

Export Office: P.O. Box 284-90, Jdeidet El Metn Beirut – Lebanon Tel: 900962 1 961+ Fax: 900963 1 961+ E-mail: [email protected]

Authorized Distributor

Our GREEN promise the healthy solut on

ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING

AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.

PRODUCTS PRODUCTS CODE

Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB

MAINTENANCE

No maintenance is required. Quiet Liner have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.

The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.

STORAGE

To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.

WARRANTY

See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,

installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.

Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.

AVAILABILITY

Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.

Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.

Special products are manufactured on request.

Pub No. -05TDS-CWI Printed November 2007


[email protected]

[email protected]

[email protected]

Technical Data SheetProduct Code: DLB

Duct Liner Board




H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]

Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]

Jeddah office:

[email protected]

Tel: Fax: E-mail:

Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]

Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]





MAINTENANCE

No maintenance is required. Blanket Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.


STORAGE


WARRANTY




AVAILABILITY





Pub No. 05-TDS-CWI Printed November 2007



H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail:

Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail:

Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:

Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail:




Our GREEN promise the healthy soluton





MAINTENANCE

No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.


STORAGE


WARRANTY



Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The

The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.

AVAILABILITY

Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia,

and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.



Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP















MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY





H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 13 847 2901 / 847 1519 / 847 2301 Fax: +966 13 847 3605 E-mail: [email protected]

Dammam Office: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 13 847 2901 / 847 1519 Fax: +966 13 847 3605 E-mail:

Riyadh Office: P.O.Box 251, Riyadh 11411, Saudi Arabia Tel: +966 11 472 5555 ext. 5980 Fax: +966 11 291 0162 E-mail:

Jeddah Office: P.O. Box 7504, Jeddah 21472, Saudi Arabia Tel: +966 12 670 0020 ext. 134 Fax: +966 12 671 4566. Email:


Export Office: P.O. Box 90-284, Jdeidet El Metn, Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail:

See manufacturer’s General Terms and Conditions of Sale. As and/or OCF has no control over installation design, installation workmanship, accessory materials, or conditions of application, and/or OCF does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.







Jeddah office:

[email protected]

Tel: Fax: E-mail:







MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY





AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY






No maintenance is required. Duct Liner Board have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot proof, odorless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.

The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fiberglass is non toxic and not hazardous to health.







Jeddah office:

[email protected]

Tel: Fax: E-mail:







MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY





AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY










Jeddah office:

[email protected]

Tel: Fax: E-mail:







MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY





AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY










Jeddah office:

[email protected]

Tel: Fax: E-mail:







MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY





AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY










Jeddah office:

[email protected]

Tel: Fax: E-mail:







MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY





AVAILABILITY




















MAINTENANCE



STORAGE


WARRANTY




AVAILABILITY





Manufactured by Arabian Fiberglass Insulation Company, Ltd. member of Zamil Industrial Co. ZI, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation OCF, Toledo, Ohio, U.S.A.



Acoustical Ceiling Panels ACP

Blanket Insulation BKT

Board Insulation BD

Roof Deck Board Insulation RI/RD

Cavity Wall Insulation CWI

Pre-engineered Metal Building Insulation MBI

Faced Duct Wrap FDW

Duct Liner DL

Duct Liner Board DLB

Heavy Density Pipe Insulation PI

Pipe Wrap Insulation PWI

Thermal Insulating Wool TIW

Quiet Liner QL

Quiet Liner Board QLB


Pub No. 05-TDS-CWI Printed ember 201Dec 5

[email protected]

[email protected]

[email protected]

[email protected]

[email protected]

Documents

Blanket Insulation - Fiberglass · J.V. of Zamil Industrial & Owens Corning Corp. Thickness Width Length Densities mm inch mm inch m ft kg/m 3lb/ft 25 1 400 16 10 to 36 33 to 120