Embed Size (px)
Citation preview
Thickness Width Length Densities
mm inch mm inch m ft kg/m3 lb/ft3
25 1 400 16 10
to
36
33
to
120
10-12 0.625-0.75
38 1 ½ 410 16
50 2 600 24
64 2 ½ 610 24
75 3 1200 48
89 3 ½ 1220 48
Depending
on thickness100 4
150 6
Thickness Thermal conductivity(K)
Thermal resistance(R)
mm inch W/m.°C Btu.in/hr.ft2 °F m2.°C/W hr.ft2.°F/Btu
25 1 0.040 0.28 0.63 4
38 1 ½ 0.040 0.28 0.95 5
50 2 0.040 0.28 1.25 7
64 2 ½ 0.040 0.28 1.60 9
75 3 0.040 0.28 1.88 11
89 3 ½ 0.040 0.28 2.23 13
100 4 0.040 0.28 2.50 14
150 6 0.040 0.28 3.75 21
DESCRIPTION
Blanket Insulation is a highly efficient, light weight, strong, resilient and easy to handle flexible blanket insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire retardant thermosetting and heat resistant resin.
It is free from coarse fiber and shot due to its mineral composition.
FACING
Blanket Insulation is available unfaced, or laminated with factory-applied Kraft Paper, Vinyl or Aluminum Foil Glass Reinforced Kraft (FRK) or other specific vapor barriers to prevent condensation.
STANDARD NOMINAL DIMENSIONS
Check for availability of other dimensions and densities.
NOMINAL THERMAL CONDUCTIVITY
(at °24C or °75F mean temperature) (ASTM C 518) (BS 874)
APPLICATION
Blanket Insulation is intended for use in commercial, institutional, industrial, agricultural and residential construction as thermal and acoustical insulation for the interior, exterior and cavity walls applications, partitions, prefabricated houses, poultry farms, ceilings and as back loading of existing ceiling systems.
DENSITY
10 kg/m3 (0.625 pcf)
Member ofAffiliate of
* Standard Products and Sizes
Blanket Insulation
Technical Data SheetProduct Code: BKT
Thickness Width Length Densities
mm inch mm inch m ft kg/m3 lb/ft3
25 1 400 16 10
to
36
33
to
120
10-12 0.625-0.75
38 1 ½ 410 16
50 2 600 24
64 2 ½ 610 24
75 3 1200 48
89 3 ½ 1220 48
Depending
on thickness100 4
150 6
Thickness Thermal conductivity(K)
Thermal resistance(R)
mm inch W/m.°C Btu.in/hr.ft2 °F m2.°C/W hr.ft2.°F/Btu
25 1 0.040 0.28 0.63 4
38 1 ½ 0.040 0.28 0.95 5
50 2 0.040 0.28 1.25 7
64 2 ½ 0.040 0.28 1.60 9
75 3 0.040 0.28 1.88 11
89 3 ½ 0.040 0.28 2.23 13
100 4 0.040 0.28 2.50 14
150 6 0.040 0.28 3.75 21
DESCRIPTION
Blanket Insulation is a highly efficient, light weight, strong, resilient and easy to handle flexible blanket insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire retardant thermosetting and heat resistant resin.
It is free from coarse fiber and shot due to its mineral composition.
FACING
Blanket Insulation is available unfaced, or laminated with factory-applied Kraft Paper, Vinyl or Aluminum Foil Glass Reinforced Kraft (FRK) or other specific vapor barriers to prevent condensation.
STANDARD NOMINAL DIMENSIONS
Check for availability of other dimensions and densities.
NOMINAL THERMAL CONDUCTIVITY
(at °24C or °75F mean temperature) (ASTM C 518) (BS 874)
APPLICATION
Blanket Insulation is intended for use in commercial, institutional, industrial, agricultural and residential construction as thermal and acoustical insulation for the interior, exterior and cavity walls applications, partitions, prefabricated houses, poultry farms, ceilings and as back loading of existing ceiling systems.
DENSITY
10 kg/m3 (0.625 pcf)
Member ofAffiliate of
* Standard Products and Sizes
Blanket Insulation
Technical Data SheetProduct Code: BKT
Arabian Fiberglass Insulation Company Ltd.J.V. of Zamil Industrial & Owens Corning Corp.
Thickness Width Length Densities
mm inch mm inch m ft kg/m3 lb/ft3
25 1 400 16 10
to
36
33
to
120
10-12 0.625-0.75
38 1 ½ 410 16
50 2 600 24
64 2 ½ 610 24
75 3 1200 48
89 3 ½ 1220 48
Depending
on thickness100 4
150 6
Thickness Thermal conductivity(K)
Thermal resistance(R)
mm inch W/m.°C Btu.in/hr.ft2 °F m2.°C/W hr.ft2.°F/Btu
25 1 0.040 0.28 0.63 4
38 1 ½ 0.040 0.28 0.95 5
50 2 0.040 0.28 1.25 7
64 2 ½ 0.040 0.28 1.60 9
75 3 0.040 0.28 1.88 11
89 3 ½ 0.040 0.28 2.23 13
100 4 0.040 0.28 2.50 14
150 6 0.040 0.28 3.75 21
DESCRIPTION
Blanket Insulation is a highly efficient, light weight, strong, resilient and easy to handle flexible blanket insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire retardant thermosetting and heat resistant resin.
It is free from coarse fiber and shot due to its mineral composition.
FACING
Blanket Insulation is available unfaced, or laminated with factory-applied Kraft Paper, Vinyl or Aluminum Foil Glass Reinforced Kraft (FRK) or other specific vapor barriers to prevent condensation.
STANDARD NOMINAL DIMENSIONS
Check for availability of other dimensions and densities.
NOMINAL THERMAL CONDUCTIVITY
(at 24°C or 75°F mean temperature) (ASTM C 518) (BS 874)
APPLICATION
Blanket Insulation is intended for use in commercial, institutional, industrial, agricultural and residential construction as thermal and acoustical insulation for the interior, exterior and cavity walls applications, partitions, prefabricated houses, poultry farms, ceilings and as back loading of existing ceiling systems.
DENSITY
10 kg/m3 (0.625 pcf)
Member ofAffiliate of
* Standard Products and Sizes
Blanket Insulation
Technical Data SheetProduct Code: BKT
Arabian Fiberglass Insulation Company Ltd.J.V. of Zamil Industrial & Owens Corning Corp.
Thickness Width Length Densities
mm inch mm inch m ft kg/m3 lb/ft3
25 1 400 16 10
to
36
33
to
120
10-12 0.625-0.75
38 1 ½ 410 16
50 2 600 24
64 2 ½ 610 24
75 3 1200 48
89 3 ½ 1220 48
Depending
on thickness100 4
150 6
Thickness Thermal conductivity(K)
Thermal resistance(R)
mm inch W/m.°C Btu.in/hr.ft2 °F m2.°C/W hr.ft2.°F/Btu
25 1 0.040 0.28 0.63 4
38 1 ½ 0.040 0.28 0.95 5
50 2 0.040 0.28 1.25 7
64 2 ½ 0.040 0.28 1.60 9
75 3 0.040 0.28 1.88 11
89 3 ½ 0.040 0.28 2.23 13
100 4 0.040 0.28 2.50 14
150 6 0.040 0.28 3.75 21
DESCRIPTION
Blanket Insulation is a highly efficient, light weight, strong, resilient and easy to handle flexible blanket insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire retardant thermosetting and heat resistant resin.
It is free from coarse fiber and shot due to its mineral composition.
FACING
Blanket Insulation is available unfaced, or laminated with factory-applied Kraft Paper, Vinyl or Aluminum Foil Glass Reinforced Kraft (FRK) or other specific vapor barriers to prevent condensation.
STANDARD NOMINAL DIMENSIONS
Check for availability of other dimensions and densities.
NOMINAL THERMAL CONDUCTIVITY
(at 24°C or 75°F mean temperature) (ASTM C 518) (BS 874)
APPLICATION
Blanket Insulation is intended for use in commercial, institutional, industrial, agricultural and residential construction as thermal and acoustical insulation for the interior, exterior and cavity walls applications, partitions, prefabricated houses, poultry farms, ceilings and as back loading of existing ceiling systems.
DENSITY
10 kg/m3 (0.625 pcf)
Member ofAffiliate of
* Standard Products and Sizes
Blanket Insulation
Technical Data SheetProduct Code: BKT
Blanket Insulation (BKT)
Blanket Insulation is a highly efficient, light weight, strong, resilient and easy to handle flexible blanket insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire retardant thermosetting and heat resistant resin. It is free from coarse fiber and shot due to its mineral composition.
Blanket Insulation is available unfaced or laminated with factory-applied Kraft Paper, or Aluminum Foil Reinforced Kraft Paper Laminate (FRK) or other specific vapor barriers to prevent condensation.
Arabian Fiberglass Insulation Company Ltd.J.V. of Zamil Industrial & Owens Corning Corp.
Thickness Width Length Densities
mm inch mm inch m ft kg/m3 lb/ft3
25 1 400 16 10
to
36
33
to
120
10-12 0.625-0.75
38 1 ½ 410 16
50 2 600 24
64 2 ½ 610 24
75 3 1200 48
89 3 ½ 1220 48
Depending
on thickness100 4
150 6
Thickness Thermal conductivity(K)
Thermal resistance(R)
mm inch W/m.°C Btu.in/hr.ft2 °F m2.°C/W hr.ft2.°F/Btu
25 1 0.040 0.28 0.63 4
38 1 ½ 0.040 0.28 0.95 5
50 2 0.040 0.28 1.25 7
64 2 ½ 0.040 0.28 1.60 9
75 3 0.040 0.28 1.88 11
89 3 ½ 0.040 0.28 2.23 13
100 4 0.040 0.28 2.50 14
150 6 0.040 0.28 3.75 21
DESCRIPTION
Blanket Insulation is a highly efficient, light weight, strong, resilient and easy to handle flexible blanket insulation composed of fine, stable and uniformly textured inorganic glass fibers bonded together by a non-water soluble and fire retardant thermosetting and heat resistant resin.
It is free from coarse fiber and shot due to its mineral composition.
FACING
Blanket Insulation is available unfaced, or laminated with factory-applied Kraft Paper, Vinyl or Aluminum Foil Glass Reinforced Kraft (FRK) or other specific vapor barriers to prevent condensation.
STANDARD NOMINAL DIMENSIONS
Check for availability of other dimensions and densities.
NOMINAL THERMAL CONDUCTIVITY
(at 24°C or 75°F mean temperature) (ASTM C 518) (BS 874)
APPLICATION
Blanket Insulation is intended for use in commercial, institutional, industrial, agricultural and residential construction as thermal and acoustical insulation for the interior, exterior and cavity walls applications, partitions, prefabricated houses, poultry farms, ceilings and as back loading of existing ceiling systems.
DENSITY
10 kg/m3 (0.625 pcf)
Member ofAffiliate of
* Standard Products and Sizes
Blanket Insulation
Technical Data SheetProduct Code: BKT
Blanket Insulation is intended for use in commercial, institutional, industrial, agricultural and residential construction as thermal and acoustical insulation for the interior, exterior and cavity wall applications, partitions, prefabricated houses, poultry farms, ceilings and as back loading of existing ceiling systems. The semi-rigid blankets with densities from 24 to 56 kg/m3, 1.5-3.5 lb/ft3 are flexible insulation rolls for application over irregularly shaped surfaces where rigidity properties are desired.
Nominal Manufacturing Specifications.Check for availability of other dimensions and densities
ProductTypeBKT
Density Thickness Width LengthThermal Resistance
R-Value at 240C
kg/m3 lb/ft3 mm inch mm inch m ft m2·°K/W hr·ft2·°F/Btu
120 12 0.75 25 1 0.625 3.55 (4)
140 14 0.875 38 11/2
400 15 10 32 0.641 3.64 (4)
160 16 1.0 50 2 410 16 15 49 1.282 7.28 (7)
180 18 1.125 64 21/2
600 20 20 65 1.316 7.47 (7)
200 20 1.25 75 3 610 25 25 82 1.351 7.67 (8)
240 24 1.5 89 31/2
1200 30 30 98 1.429 8.11 (8)
320 32 2.0 100 4 1220 35 35 114 1.429 8.11 (8)
480 48 3.0 150 6 1.515 8.60 (9)
560 56 3.5 1.515 8.60 (9)
STANDARD AVAILABLE PRODUCTS
* Depending on Thickness & Density.
ArabianFiberglassInsulationCompanyLtd.
J.V.ofGulfInsulationGroup(AZamilIndustrialSubsidiary)&OwensCorningCorp.
الشركة العربية للمواد العازله من الفايربجالس احملدودة
شراكة اسرتاتيجية بني جمموعة العزل اخلليجية )إحدى قطاعات الزامل للصناعة( وشركة أوينز كورننج
GulfInsulationGroup
Performance & Physical Characteristics
The U value is the reciprocal of the sum of the resistances of the component of the structure plus the resistance of the surfaces and any cavities within the structure.
Working Temperature Limitations (ASTM C 411)
-4°C to +260°C. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with the hot surface. This in no way impairs the performance of the insulation.
Alkalinity (ASTM C 871)
pH 9
Corrosiveness (ASTM C 665)
Chemically inert. Will not cause or accelerate corrosion of steel, stainless steel, copper or aluminum, due to its particular inorganic and mineral composition.
Mold Growth (ASTM D 2020, UL 181)
Does not breed or sustain mold, fungus, bacteria or rodents.
Moisture Absorption (ASTM D-07 B, ASTM C 553)
In conditions of 95% relative humidity at 49°C for 96 hours, moisture absorption is less than 0.2% by volume, when tested in accordance with ASTM C 533. fiberglass products do not absorb moisture from the ambient air nor water by capillary attraction, only water under pressure can enter the insulation products but that will quickly dry out owing to the material’s open cell structure.
Vapor Permeability (ASTM E96A)
KRAFT 1.00 PERMFRK 0.02 PERM
Puncture Resistance (ASTM D 781)
FRK 25 Units
Compressive Strength
PCF AT 10% DEFORMATION 5PCF AT 25% DEFORMATION 10
Surface Burning Characteristics(UL 723, ASTM E 84, ASTM E 136)
Base glass fiber is non-combustible when tested to ASTM E84.
Thermal Resistance “R” Value (Unfaced) (ASTM C 167)
“R” is a measure of the resistance to heat flow of a material of any given thickness. (“R” = m2.°C/W or hr. ft2.°F/Btu.)
R = where “T” = thickness and “K” or “ ” = thermal conductivity
Thermal Conductance, “C”- Value (ASTM C 518, ASTM C 177)
C = = W/m2.°C or Btu/hr.ft2.°F.
It is the ability of the product to conduct heat.
Thermal Transmittance (U Value)
Thermal transmittance is the rate of heat flow through unit area of a wall system when unit temperature difference exists between air on each side of the structure.
Fire Properties
B.S. 476 PART 4 – Non-combustibleB.S. 476 PART 5 – IgnitabilityB.S. 476 PART 6 – Fire propagationB.S. 476 PART 7 – Surface spread of flameClass ‘O’ fire rating to the building regulations section E15
Specification Compliance
Blanket Installation complies with the property requirements of the following specifications:•UNFACED - U.S. Federal spec. HH-I-521 E Type I•KRAFT FACED - U.S. Federal Spec. HH-I-521 E Type II, Class C•FRK FACED - U.S. Federal Spec. HH-I-521 F, Type III, Class A, ASTM C 665•DCL ASTM - C 533 - C 547 - C 612 - C 665•CE-EN 13162
Acoustical Performance (ASTM C 423)
Sound Absorption Coeffecients at Frequencies (Hz)
Table 1-1Sound Absorption Coeffecients
Fiberglass Blanket Insulation
1R
Product Type & Thickness
Mounting(1)
Sound Absorption CoefficientsOctave Band Center Frequencies, Hz
125 250 500 1000 2000 4000 NRC
3.5” (R-11), insulation exposed to sound A .34 .85 1.09 .97 .97 1.12 .95
6.0” (R-19), insulation exposed to sound A .64 1.14 1.09 .99 1.00 1.21 1.05
3.5” (R-11), insulation exposed to sound E-405 .80 .98 1.01 1.04 .98 1.15 1.00
6.0” (R-19), insulation exposed to sound E-405 .86 1.03 1.13 1.02 1.04 1.13 1.05
3.5” (R-19) FRK facing exposed to sound A .56 1.11 1.16 .61 .40 .21 .80
6.0” (R-19), FRK facing exposed to sound A .94 1.33 1.02 .71 .56 .39 .90
Facing FlameSpread
Smoke Developed
FuelContributed
FRK 0 0 0
1
Rso + R1 + R2 + R3 + RsiHere U =
Rso = Outside surface resistanceR1 = External sheetingR2 = AFICO insulationR3 = Internal sheeting or lining if anyRsi = Inside surface resistance Rso R1 R2 R3 Rsi
T
K
Arabian Fiberglass Insulation Company Ltd.J.V. of Zamil Industrial & Owens Corning Corp.
Blanket InsulationTechnical Data SheetProduct Code: BKT
Blanket InsulationTechnical Data SheetProduct Code: BKT
Thermal Resistance “R” Value (ASTM C 167)“R” is a measure of the resistance to heat flow of a material of any given thickness.(“R” = m2·°K/W or hr·ft2·°F/Btu)
R = T where “T” = Thickness K and “K” or “λ” = Thermal Conductivity
“C” It is ability of the product to conduct heat. (“C” = W/m2·°K or Btu/hr·ft2·°F)
C = 1 where “T” = Thickness R and “K” or “λ” = Thermal Conductance
Performance & Physical Characteristics
The U value is the reciprocal of the sum of the resistances of the component of the structure plus the resistance of the surfaces and any cavities within the structure.
Working Temperature Limitations (ASTM C 411)
-4°C to +260°C. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with the hot surface. This in no way impairs the performance of the insulation.
Alkalinity (ASTM C 871)
pH 9
Corrosiveness (ASTM C 665)
Chemically inert. Will not cause or accelerate corrosion of steel, stainless steel, copper or aluminum, due to its particular inorganic and mineral composition.
Mold Growth (ASTM D 2020, UL 181)
Does not breed or sustain mold, fungus, bacteria or rodents.
Moisture Absorption (ASTM D-07 B, ASTM C 553)
In conditions of 95% relative humidity at 49°C for 96 hours, moisture absorption is less than 0.2% by volume, when tested in accordance with ASTM C 533. fiberglass products do not absorb moisture from the ambient air nor water by capillary attraction, only water under pressure can enter the insulation products but that will quickly dry out owing to the material’s open cell structure.
Vapor Permeability (ASTM E96A)
KRAFT 1.00 PERMFRK 0.02 PERM
Puncture Resistance (ASTM D 781)
FRK 25 Units
Compressive Strength
PCF AT 10% DEFORMATION 5PCF AT 25% DEFORMATION 10
Surface Burning Characteristics(UL 723, ASTM E 84, ASTM E 136)
Base glass fiber is non-combustible when tested to ASTM E84.
Thermal Resistance “R” Value (Unfaced) (ASTM C 167)
“R” is a measure of the resistance to heat flow of a material of any given thickness. (“R” = m2.°C/W or hr. ft2.°F/Btu.)
R = where “T” = thickness and “K” or “ ” = thermal conductivity
Thermal Conductance, “C”- Value (ASTM C 518, ASTM C 177)
C = = W/m2.°C or Btu/hr.ft2.°F.
It is the ability of the product to conduct heat.
Thermal Transmittance (U Value)
Thermal transmittance is the rate of heat flow through unit area of a wall system when unit temperature difference exists between air on each side of the structure.
Fire Properties
B.S. 476 PART 4 – Non-combustibleB.S. 476 PART 5 – IgnitabilityB.S. 476 PART 6 – Fire propagationB.S. 476 PART 7 – Surface spread of flameClass ‘O’ fire rating to the building regulations section E15
Specification Compliance
Blanket Installation complies with the property requirements of the following specifications:•UNFACED - U.S. Federal spec. HH-I-521 E Type I•KRAFT FACED - U.S. Federal Spec. HH-I-521 E Type II, Class C•FRK FACED - U.S. Federal Spec. HH-I-521 F, Type III, Class A, ASTM C 665•DCL ASTM - C 533 - C 547 - C 612 - C 665•CE-EN 13162
Acoustical Performance (ASTM C 423)
Sound Absorption Coeffecients at Frequencies (Hz)
Table 1-1Sound Absorption Coeffecients
Fiberglass Blanket Insulation
1R
Product Type & Thickness
Mounting(1)
Sound Absorption CoefficientsOctave Band Center Frequencies, Hz
125 250 500 1000 2000 4000 NRC
3.5” (R-11), insulation exposed to sound A .34 .85 1.09 .97 .97 1.12 .95
6.0” (R-19), insulation exposed to sound A .64 1.14 1.09 .99 1.00 1.21 1.05
3.5” (R-11), insulation exposed to sound E-405 .80 .98 1.01 1.04 .98 1.15 1.00
6.0” (R-19), insulation exposed to sound E-405 .86 1.03 1.13 1.02 1.04 1.13 1.05
3.5” (R-19) FRK facing exposed to sound A .56 1.11 1.16 .61 .40 .21 .80
6.0” (R-19), FRK facing exposed to sound A .94 1.33 1.02 .71 .56 .39 .90
Facing FlameSpread
Smoke Developed
FuelContributed
FRK 0 0 0
1
Rso + R1 + R2 + R3 + RsiHere U =
Rso = Outside surface resistanceR1 = External sheetingR2 = AFICO insulationR3 = Internal sheeting or lining if anyRsi = Inside surface resistance Rso R1 R2 R3 Rsi
T
K
Arabian Fiberglass Insulation Company Ltd.J.V. of Zamil Industrial & Owens Corning Corp.
Blanket InsulationTechnical Data SheetProduct Code: BKT
Working Temperature Limitations (ASTM C 411)
Operating temperature -4°C to 250°C At excessive temperatures, limited migration of binder may occur in the insulation in contact with the surface. This is in no way impairs the performance of the insulation.
Mold Growth (ASTM D 2020, UL 181)
Does not breed or sustain mold, fungus, bacteria or rodents
Corrosiveness (ASTM C 665)
Chemically inert. Will not cause or accelerate corrosion of steel, stainless steel, copper or aluminum, due to its particular inorganic and mineral composition.
Alkalinity
pH 9
Surface Burning Characteristics
(ASTM E 84, UL 723)
Base glass fiber is non-combustible when tested to ASTM E 84.
FacingFlameSpread
SmokeDeveloped
FuelContributed
unfaced 0 0 0
FRK 25 10 0
Product Type & Thickness
Mounting (1)
Sound Absorption CoefficientsOctave Band Center Frequencies, Hz
125 250 500 1000 2000 4000 NRC
3.5” (R-11), insulation exposed to sound
A 0.34 0.85 1.09 0.97 0.97 1.12 0.95
6.0” (R-19), insulation exposed to sound
A 0.64 1.14 1.09 0.99 1.00 1.21 1.05
3.5” (R-11), insulation exposed to sound
E-405 0.80 0.98 1.01 1.04 0.98 1.15 1.00
6.0” (R-19), insulation exposed to sound
E-405 0.86 1.03 1.13 1.02 1.04 1.13 1.05
3.5” (R-19) FRK facing exposed to sound
A 0.56 1.11 1.16 0.61 0.40 0.21 0.80
6.0” (R-19), FRK facing exposed to sound
A 0.94 1.33 1.02 0.71 0.56 0.39 0.90
Specification Compliance
Blanket Insulation complies with the property requirements of the following specifications:
DCL : ASTM C 665
CE-EN : 1121-CPD-BA0136
Vapor Permeability (ASTM E 96 A) FRK : 0.020 PERM
Kraft : 1.00 PERM
Fire Properties
B.S. 476 PART 4 : Non Combustible
B.S. 476 PART 5 : Ignitability
B.S. 476 PART 6 : Fire Propagation
B.S. 476 PART 7 : Surface Spread of Flame
Class ‘O’ fire rating to the building regulations sections E15
Compressive Strength
Type 120 140 160 180 200 240 320 480 560
PSFat10%Deformation 5 5 5 10 10 12 16 25 30
PSFat25%Deformation
10 10 10 15 15 20 60 90 110
Puncture Resistance (ASTM D 781)
Aluminum Foil Reinforced : 25 Units Kraft Paper Laminate (FRK)
Acoustical Performance (ASTM C 423)
Sound Absorption Coefficients at Frequencies (Hz)
Table 1-1
Sound Absorption Coefficients
Fiberglass Blanket Insulation
Thermal Conductance “C” Value (ASTM C 518, ASTM C 177)
Type0°C
32°F
10°C
50°F
24°C
75°F
50°C
122°F
75°C
167°F
100°C
212°F
120 0.036 0.25 0.038 0.27 0.040 0.28 0.048 0.34 0.059 0.41 0.065 0.45
140 0.035 0.24 0.037 0.26 0.039 0.27 0.046 0.32 0.055 0.38 0.061 0.42
160 0.034 0.23 0.036 0.25 0.038 0.27 0.044 0.31 0.051 0.35 0.057 0.40
180 0.033 0.23 0.035 0.24 0.037 0.26 0.043 0.30 0.048 0.34 0.053 0.37
200 0.032 0.22 0.034 0.23 0.036 0.25 0.041 0.28 0.046 0.32 0.051 0.36
240 0.031 0.20 0.032 0.22 0.035 0.24 0.039 0.27 0.043 0.30 0.047 0.33
320 0.030 0.20 0.031 0.22 0.033 0.23 0.037 0.25 0.040 0.27 0.044 0.30
480 0.029 0.20 0.030 0.21 0.031 0.22 0.035 0.24 0.037 0.26 0.041 0.29
560 0.030 0.21 0.031 0.21 0.032 0.23 0.036 0.24 0.038 0.26 0.042 0.29
“K” or “0.040 = ”ג W/m·°K or 0.28 Btu·in/hr·ft2·°Fat 24 OC or 75OF mean temperature
NORMAL THERMAL CONDUCTIVITY (ASTM C 518)
Performance & Physical Characteristics
Table 1-2Sound Absorption Coefficients, Fiberglass noise barrier batts
Notes to Tables:(1) Mounting* Type A (formerly no. 4) – Material placed against a solid backing such as a block wall.* E-405 (formerly no. 7)- Material placed over a 16-inch air space. Data include exposed to sound source, if specified.
Installation
Blanket Installation can be installed quickly and easily in virtually any type of construction.
Between metal studs or Z channels, the insulation can be friction-fit in place while the interior finish is applied. In areas where it will be applied in heights over 2.5m, supplementary support should be provided to hold the insulation in place while the interior finish is applied.
When applied to masonry walls, the insulation can be fixed by impaling on pins or other similar attachments and then affixing a locking washer to hold the insulation in place.
For ceiling installations, the insulation is simply laid out on top of ceiling panels or other suspension systems.
Product Type &
Thickness
Mounting(1)
Octave Band Center Frequencies, Hz
125 250 500 1000 2000 4000 NRC
2.5” (R-8) A .21 .62 .93 .92 .91 1.03 .85
3.5” (R-11) A .38 .88 1.13 1.03 .97 1.12 1.00
2.5” (R-8) E-405 .59 .84 .79 .94 .96 1.12 .90
3.5” (R-11) E-405 .73 .98 .98 1.05 1.08 1.15 1.00
Arabian Fiberglass Insulation Company Ltd.J.V. of Zamil Industrial & Owens Corning Corp.
Blanket InsulationTechnical Data SheetProduct Code: BKT
Insulation Cavity
Cement Block Wall
Z-Channels withGypsum Board
Precast Concrete(Exterior)
Z-Channels
Gypsum Board
Insulation
Poured Concrete
Plaster
Insulation
Stiffner
MetalSiding
Z-Channel Furring
Insulation
Wire Mesh
Reinforced Concrete
Plaster
Plaster
Concrete Tiles
Mortar
Sand, Cement
Screed Roof Membrance
Concrete Deck
Suspended Ceiling
Insulation
Wood Lath
Wood Studs
Cement Block Solid
Insulation
Fiber-ReinforcedTile
Performance & Physical Characteristics
The U value is the reciprocal of the sum of the resistances of the component of the structure plus the resistance of the surfaces and any cavities within the structure.
Working Temperature Limitations (ASTM C 411)
-4°C to +260°C. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with the hot surface. This in no way impairs the performance of the insulation.
Alkalinity (ASTM C 871)
pH 9
Corrosiveness (ASTM C 665)
Chemically inert. Will not cause or accelerate corrosion of steel, stainless steel, copper or aluminum, due to its particular inorganic and mineral composition.
Mold Growth (ASTM D 2020, UL 181)
Does not breed or sustain mold, fungus, bacteria or rodents.
Moisture Absorption (ASTM D-07 B, ASTM C 553)
In conditions of 95% relative humidity at 49°C for 96 hours, moisture absorption is less than 0.2% by volume, when tested in accordance with ASTM C 533. fiberglass products do not absorb moisture from the ambient air nor water by capillary attraction, only water under pressure can enter the insulation products but that will quickly dry out owing to the material’s open cell structure.
Vapor Permeability (ASTM E96A)
KRAFT 1.00 PERMFRK 0.02 PERM
Puncture Resistance (ASTM D 781)
FRK 25 Units
Compressive Strength
PCF AT 10% DEFORMATION 5PCF AT 25% DEFORMATION 10
Surface Burning Characteristics(UL 723, ASTM E 84, ASTM E 136)
Base glass fiber is non-combustible when tested to ASTM E84.
Thermal Resistance “R” Value (Unfaced) (ASTM C 167)
“R” is a measure of the resistance to heat flow of a material of any given thickness. (“R” = m2.°C/W or hr. ft2.°F/Btu.)
R = where “T” = thickness and “K” or “ ” = thermal conductivity
Thermal Conductance, “C”- Value (ASTM C 518, ASTM C 177)
C = = W/m2.°C or Btu/hr.ft2.°F.
It is the ability of the product to conduct heat.
Thermal Transmittance (U Value)
Thermal transmittance is the rate of heat flow through unit area of a wall system when unit temperature difference exists between air on each side of the structure.
Fire Properties
B.S. 476 PART 4 – Non-combustibleB.S. 476 PART 5 – IgnitabilityB.S. 476 PART 6 – Fire propagationB.S. 476 PART 7 – Surface spread of flameClass ‘O’ fire rating to the building regulations section E15
Specification Compliance
Blanket Installation complies with the property requirements of the following specifications:•UNFACED - U.S. Federal spec. HH-I-521 E Type I•KRAFT FACED - U.S. Federal Spec. HH-I-521 E Type II, Class C•FRK FACED - U.S. Federal Spec. HH-I-521 F, Type III, Class A, ASTM C 665•DCL ASTM - C 533 - C 547 - C 612 - C 665•CE-EN 13162
Acoustical Performance (ASTM C 423)
Sound Absorption Coeffecients at Frequencies (Hz)
Table 1-1Sound Absorption Coeffecients
Fiberglass Blanket Insulation
1R
Product Type & Thickness
Mounting(1)
Sound Absorption CoefficientsOctave Band Center Frequencies, Hz
125 250 500 1000 2000 4000 NRC
3.5” (R-11), insulation exposed to sound A .34 .85 1.09 .97 .97 1.12 .95
6.0” (R-19), insulation exposed to sound A .64 1.14 1.09 .99 1.00 1.21 1.05
3.5” (R-11), insulation exposed to sound E-405 .80 .98 1.01 1.04 .98 1.15 1.00
6.0” (R-19), insulation exposed to sound E-405 .86 1.03 1.13 1.02 1.04 1.13 1.05
3.5” (R-19) FRK facing exposed to sound A .56 1.11 1.16 .61 .40 .21 .80
6.0” (R-19), FRK facing exposed to sound A .94 1.33 1.02 .71 .56 .39 .90
Facing FlameSpread
Smoke Developed
FuelContributed
FRK 0 0 0
1
Rso + R1 + R2 + R3 + RsiHere U =
Rso = Outside surface resistanceR1 = External sheetingR2 = AFICO insulationR3 = Internal sheeting or lining if anyRsi = Inside surface resistance Rso R1 R2 R3 Rsi
T
K
Arabian Fiberglass Insulation Company Ltd.J.V. of Zamil Industrial & Owens Corning Corp.
Blanket InsulationTechnical Data SheetProduct Code: BKT
Product Type & Thickness
Mounting (1)
Sound Absorption CoefficientsOctave Band Center Frequencies, Hz
125 250 500 1000 2000 4000 NRC
2.5” (R-8) A 0.21 0.62 0.93 0.92 0.91 1.03 0.85
3.5” (R-11) A 0.38 0.88 1.13 1.03 0.97 1.12 1.00
2.5” (R-8) E-405 0.59 0.84 0.79 0.94 0.96 1.12 0.90
3.5” (R-11) E-405 0.73 0.98 0.98 1.05 1.08 1.15 1.00
Table 1-2 Sound Absorption Coefficients, Fiberglass noise barrier batts.
Notes to Tables:
(1) Mounting
* Type A (formerly no. 4) - Material placed against a solid backing such as a block wall.
* E-405 (formerly no. 7) - Material placed over a 16-inch air space. Data include exposed to sound source, if specified.
Installation Recommendation
Blanket Installation can be installed quickly and easily in virtually any type of construction.
Between metal studs or Z channels, the insulation can be friction-fit in place while the interior finish is applied. In areas where it will be applied in heights over 2.5m, supplementary support should be provided to hold the insulation in place while the interior finish is applied.
When applied to masonry walls, the insulation can be fixed by impaling on pins or other similar attachments and then affixing a locking washer to hold the insulation in place.
For ceiling installations, the insulation is simply laid out on top of ceiling panels or other suspension systems.
Performance & Physical Characteristics
Table 1-2Sound Absorption Coefficients, Fiberglass noise barrier batts
Notes to Tables:(1) Mounting* Type A (formerly no. 4) – Material placed against a solid backing such as a block wall.* E-405 (formerly no. 7)- Material placed over a 16-inch air space. Data include exposed to sound source, if specified.
Installation
Blanket Installation can be installed quickly and easily in virtually any type of construction.
Between metal studs or Z channels, the insulation can be friction-fit in place while the interior finish is applied. In areas where it will be applied in heights over 2.5m, supplementary support should be provided to hold the insulation in place while the interior finish is applied.
When applied to masonry walls, the insulation can be fixed by impaling on pins or other similar attachments and then affixing a locking washer to hold the insulation in place.
For ceiling installations, the insulation is simply laid out on top of ceiling panels or other suspension systems.
Product Type &
Thickness
Mounting(1)
Octave Band Center Frequencies, Hz
125 250 500 1000 2000 4000 NRC
2.5” (R-8) A .21 .62 .93 .92 .91 1.03 .85
3.5” (R-11) A .38 .88 1.13 1.03 .97 1.12 1.00
2.5” (R-8) E-405 .59 .84 .79 .94 .96 1.12 .90
3.5” (R-11) E-405 .73 .98 .98 1.05 1.08 1.15 1.00
Arabian Fiberglass Insulation Company Ltd.J.V. of Zamil Industrial & Owens Corning Corp.
Blanket InsulationTechnical Data SheetProduct Code: BKT
Insulation Cavity
Cement Block Wall
Z-Channels withGypsum Board
Precast Concrete(Exterior)
Z-Channels
Gypsum Board
Insulation
Poured Concrete
Plaster
Insulation
Stiffner
MetalSiding
Z-Channel Furring
Insulation
Wire Mesh
Reinforced Concrete
Plaster
Plaster
Concrete Tiles
Mortar
Sand, Cement
Screed Roof Membrance
Concrete Deck
Suspended Ceiling
Insulation
Wood Lath
Wood Studs
Cement Block Solid
Insulation
Fiber-ReinforcedTile
Wood Lath
Fiber-Reinforced Tile
Wood Studs
Cement Block Solid
Insulation
Z-Channel Furring
Insulation
Wire Mesh
Reinforced Concrete
Plaster
Plaster
Insulation Cavity
Cement Block Wall
Z-Channels withGypsum Board
Precast Concrete(Exterior)
Z-Channels
Insulation
Gypsum Board
Poured Concrete
Plaster
Insulation
Stiffner
MetalSiding
Concrete Tiles
MortarSand, Cement
Screed Roof Membrance
Concrete Deck
Insulation
Suspended Ceiling
Performance & Physical Characteristics
The U value is the reciprocal of the sum of the resistances of the component of the structure plus the resistance of the surfaces and any cavities within the structure.
Working Temperature Limitations (ASTM C 411)
-4°C to +260°C. At excessive temperatures, a limited migration of binder may occur in the insulation in contact with the hot surface. This in no way impairs the performance of the insulation.
Alkalinity (ASTM C 871)
pH 9
Corrosiveness (ASTM C 665)
Chemically inert. Will not cause or accelerate corrosion of steel, stainless steel, copper or aluminum, due to its particular inorganic and mineral composition.
Mold Growth (ASTM D 2020, UL 181)
Does not breed or sustain mold, fungus, bacteria or rodents.
Moisture Absorption (ASTM D-07 B, ASTM C 553)
In conditions of 95% relative humidity at 49°C for 96 hours, moisture absorption is less than 0.2% by volume, when tested in accordance with ASTM C 533. fiberglass products do not absorb moisture from the ambient air nor water by capillary attraction, only water under pressure can enter the insulation products but that will quickly dry out owing to the material’s open cell structure.
Vapor Permeability (ASTM E96A)
KRAFT 1.00 PERMFRK 0.02 PERM
Puncture Resistance (ASTM D 781)
FRK 25 Units
Compressive Strength
PCF AT 10% DEFORMATION 5PCF AT 25% DEFORMATION 10
Surface Burning Characteristics(UL 723, ASTM E 84, ASTM E 136)
Base glass fiber is non-combustible when tested to ASTM E84.
Thermal Resistance “R” Value (Unfaced) (ASTM C 167)
“R” is a measure of the resistance to heat flow of a material of any given thickness. (“R” = m2.°C/W or hr. ft2.°F/Btu.)
R = where “T” = thickness and “K” or “ ” = thermal conductivity
Thermal Conductance, “C”- Value (ASTM C 518, ASTM C 177)
C = = W/m2.°C or Btu/hr.ft2.°F.
It is the ability of the product to conduct heat.
Thermal Transmittance (U Value)
Thermal transmittance is the rate of heat flow through unit area of a wall system when unit temperature difference exists between air on each side of the structure.
Fire Properties
B.S. 476 PART 4 – Non-combustibleB.S. 476 PART 5 – IgnitabilityB.S. 476 PART 6 – Fire propagationB.S. 476 PART 7 – Surface spread of flameClass ‘O’ fire rating to the building regulations section E15
Specification Compliance
Blanket Installation complies with the property requirements of the following specifications:•UNFACED - U.S. Federal spec. HH-I-521 E Type I•KRAFT FACED - U.S. Federal Spec. HH-I-521 E Type II, Class C•FRK FACED - U.S. Federal Spec. HH-I-521 F, Type III, Class A, ASTM C 665•DCL ASTM - C 533 - C 547 - C 612 - C 665•CE-EN 13162
Acoustical Performance (ASTM C 423)
Sound Absorption Coeffecients at Frequencies (Hz)
Table 1-1Sound Absorption Coeffecients
Fiberglass Blanket Insulation
1R
Product Type & Thickness
Mounting(1)
Sound Absorption CoefficientsOctave Band Center Frequencies, Hz
125 250 500 1000 2000 4000 NRC
3.5” (R-11), insulation exposed to sound A .34 .85 1.09 .97 .97 1.12 .95
6.0” (R-19), insulation exposed to sound A .64 1.14 1.09 .99 1.00 1.21 1.05
3.5” (R-11), insulation exposed to sound E-405 .80 .98 1.01 1.04 .98 1.15 1.00
6.0” (R-19), insulation exposed to sound E-405 .86 1.03 1.13 1.02 1.04 1.13 1.05
3.5” (R-19) FRK facing exposed to sound A .56 1.11 1.16 .61 .40 .21 .80
6.0” (R-19), FRK facing exposed to sound A .94 1.33 1.02 .71 .56 .39 .90
Facing FlameSpread
Smoke Developed
FuelContributed
FRK 0 0 0
1
Rso + R1 + R2 + R3 + RsiHere U =
Rso = Outside surface resistanceR1 = External sheetingR2 = AFICO insulationR3 = Internal sheeting or lining if anyRsi = Inside surface resistance Rso R1 R2 R3 Rsi
T
K
Arabian Fiberglass Insulation Company Ltd.J.V. of Zamil Industrial & Owens Corning Corp.
Blanket InsulationTechnical Data SheetProduct Code: BKT
[email protected] www.afico.com.sa
Blanket InsulationTechnical Data SheetProduct Code: BKT
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah office:
Tel: Fax: E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Blanket Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Authorized Distributor
Pub No. 05-TDS-CWI Printed November 2007
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail:
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail:
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail:
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy soluton
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The
The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia,
and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy solut on
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 13 847 2901 / 847 1519 / 847 2301 Fax: +966 13 847 3605 E-mail: [email protected]
Dammam Office: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 13 847 2901 / 847 1519 Fax: +966 13 847 3605 E-mail:
Riyadh Office: P.O.Box 251, Riyadh 11411, Saudi Arabia Tel: +966 11 472 5555 ext. 5980 Fax: +966 11 291 0162 E-mail:
Jeddah Office: P.O. Box 7504, Jeddah 21472, Saudi Arabia Tel: +966 12 670 0020 ext. 134 Fax: +966 12 671 4566. Email:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail:
Export Office: P.O. Box 90-284, Jdeidet El Metn, Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail:
See manufacturer’s General Terms and Conditions of Sale. As and/or OCF has no control over installation design, installation workmanship, accessory materials, or conditions of application, and/or OCF does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company ( ) reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
[email protected] www.afico.com.sa
Blanket InsulationTechnical Data SheetProduct Code: BKT
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah office:
Tel: Fax: E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Blanket Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Authorized Distributor
Pub No. 05-TDS-CWI Printed November 2007
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail:
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail:
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail:
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy soluton
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The
The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia,
and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy solut on
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
For more information call the insulation professionals:
Blanket InsulationTechnical Data SheetProduct Code: BKT
No maintenance is required. Blanket Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot proof, odorless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fiberglass is non toxic and not hazardous to health.
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
[email protected] www.afico.com.sa
Blanket InsulationTechnical Data SheetProduct Code: BKT
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah office:
Tel: Fax: E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Blanket Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Authorized Distributor
Pub No. 05-TDS-CWI Printed November 2007
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail:
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail:
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail:
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy soluton
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The
The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia,
and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy solut on
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
[email protected] www.afico.com.sa
Blanket InsulationTechnical Data SheetProduct Code: BKT
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah office:
Tel: Fax: E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Blanket Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Authorized Distributor
Pub No. 05-TDS-CWI Printed November 2007
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail:
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail:
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail:
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy soluton
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The
The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia,
and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy solut on
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
[email protected] www.afico.com.sa
Blanket InsulationTechnical Data SheetProduct Code: BKT
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah office:
Tel: Fax: E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Blanket Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Authorized Distributor
Pub No. 05-TDS-CWI Printed November 2007
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail:
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail:
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail:
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy soluton
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The
The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia,
and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy solut on
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
[email protected] www.afico.com.sa
Blanket InsulationTechnical Data SheetProduct Code: BKT
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah office:
Tel: Fax: E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Blanket Insulation have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Authorized Distributor
Pub No. 05-TDS-CWI Printed November 2007
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail:
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail:
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail:
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy soluton
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The
The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia,
and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
[email protected] www.afico.com.sa
For more information call the insulation professionals:
H.O. & Factory: P.O. Box 1289, Dammam 31431, Saudi Arabia Tel: +966 3 847 2901 / 847 1519 Fax: +966 3 847 3605 E-mail: [email protected]
Riyadh Office: P.O. Box 50281, Riyadh 11523, Saudi Arabia Tel: +966 1 472 5555 ext. 283 Fax: +966 1 291 0162 E-mail: [email protected]
Jeddah Office: P.O. Box 2140, Jeddah 21451, Saudi Arabia Tel: +966 2 670 0020 ext. 133 Fax: +966 2 287 2283 E-mail:
Gulf Regional Office: P.O. Box 44493, Deira, Dubai, U.A.E. Tel: +971 4 294 1211 Fax: +971 4 294 1168 E-mail: [email protected]
Export Office: P.O. Box 90-284, Jdeidet El Metn Beirut – Lebanon Tel: +961 1 900962 Fax: +961 1 900963 E-mail: [email protected]
Pub No. 05-TDS-CWI Printed November 2007
Authorized Distributor
Our GREEN promise the healthy solut on
ENERGY SAVING ENVIRONMENTALLY FRIENDLY RECYCLED MATERIALS SOLUTION FOR GLOBAL WARMING
AFICO is committed to a greener, cleaner environment. AFICO have responded to this call for conservation by increasing the amounts of recycled materials in our products.
PRODUCTS PRODUCTS CODE
Acoustical Ceiling Panels ACPBlanket Insulation BKTHD Series Blanket Insulation HDBBoard Insulation BDRoof Insulation RIRoof Deck Board Insulation RDCavity Wall Insulation CWIPre-engineered Metal Building Insulation MBIFaced Duct Wrap FDWDuct Liner DLDuct Liner Board DLBMechanical Board Insulation MBDHeavy Density Pipe Insulation PIPipe Wrap Insulation PWIThermal Insulating Wool TIWQuiet Liner AQLWoven Facing AWFPrefabricated Duct Board PDB
MAINTENANCE
No maintenance is required. Acoustical Ceiling Panels have a high resistance to accidental damage from knocks and handling during installation and maintenance. Dimensionally stable under varying conditions of temperature and humidity, rot-proof, odourless, non-hygroscopic and will not sustain vermin or fungus due to its inorganic and mineral compositions.
The product will maintain its thermal properties throughout the lifetime of the construction and will not age. fibreglass is non toxic and not hazardous to health.
STORAGE
To avoid moisture in the building construction, insulation products stored outside must be kept dry. We recommend products to be always stored in covered and dry areas. is not liable for the damage resulting from inadequate utilization, loading and off loading and mishandling of its products.
WARRANTY
See manufacturer’s General Terms and Conditions of Sale. As and/or OC has no control over installation design,
installation workmanship, accessory materials, or conditions of application, and/or OC does not warrant the performance or results of any installation containing their products. This warranty disclaimer includes all implied warranties, including the warranties or merchantability and fitness for a particular purpose.
Arabian Fiberglass Insulation Company reserves the right to alter product specifications without prior notice, as part of its policy of continued development and improvement. The installation methods described in this leaflet are not compulsory. The choice of materials and methods of fixing are the decision of the specifier, consultant or contractor. For further information or advice on specification of products, contact your local sales office.
AVAILABILITY
Manufactured by Arabian Fiberglass Insulation Company, Ltd. (AFICO), member of Zamil Industrial, with headquarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OC), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling PanelsTechnical Data SheetProduct Code: ACP
Manufactured by Arabian Fiberglass Insulation Company, Ltd. ( ) member of Zamil Industrial Co. (ZI), with head- quarters and production facilities located in Dammam, Saudi Arabia, under license from and utilizing the manufacturing specifications and technology of Owens-Corning Corporation (OCF), Toledo, Ohio, U.S.A.
Marketed throughout Saudi Arabia, the G.C.C. countries, the Middle East and the Far East. products are available directly from as well as through a vast and reliable network of local distributors.
Special products are manufactured on request.
Acoustical Ceiling Panels ACP
Blanket Insulation BKT
Board Insulation BD
Roof Deck Board Insulation RI/RD
Cavity Wall Insulation CWI
Pre-engineered Metal Building Insulation MBI
Faced Duct Wrap FDW
Duct Liner DL
Duct Liner Board DLB
Heavy Density Pipe Insulation PI
Pipe Wrap Insulation PWI
Thermal Insulating Wool TIW
Quiet Liner QL
Quiet Liner Board QLB
PRODUCTS PRODUCTS CODE
Pub No. 05-TDS-CWI Printed ember 2015Dec
