Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
111 North River RoadNorth Aurora, IL 60542Phone: (800) 323-5664
Fax: (630) [email protected]
Model # H36-7-P-SF Dimension Sheet
www.belson.com
HEAVY-DUTY CHALLENGER | 5 LOOPS 7 BIKES
61-1/4"±1"
9-7/8"
63-5/8"±1"
37"±1/2" 2" SCHED 40 PIPE( 2-3/8" O.D. )
GRADE
ELEVATION VIEW
LAG BOLTCONCRETE
www.belson.com
5 GRID BIKE RACK, BLACK
30-3/4”
59-7/8”
30-7/8”
3/4” O.D. TUBING(16 ga)
1-7/8” O.D. TUBING(11 ga)
2-1/2”7-7/8”
111 North River RoadNorth Aurora, IL 60542Phone: (800) 323-5664
Fax: (630) [email protected]
Model # CBBR-5SG-BK Dimension Sheet
Specifications Model # # Bikes Description weight length width height Space Requirement
6006 1 Wall Mount 16.7 lbs 18.6” 4.9” 53.3” 71”h x 45”w
Specifications Model # # Bikes Description weight length width height Space Requirement
6003C 1 Wall Mount 10 lbs. 5.3” 2.9” 53.3” 71”h x 45”w
Specifications Model # # Bikes Description weight length width height Space Requirement
6003T 1 Wall Mount 9 lbs. 5.3” 2.9” 53” 71”h x 45”w
Note: Saris Parking Systems representatives can assist with custom layout and spacing to meet your room dimensions and desired bike capacity.
BIKE TRACS
The bike tracs provide full bike coverage to protect the walls, while also providing free-dom for capacity and mounting configu-ration. Available in locking (2 systems to choose from) and non-locking options.
Saris Bicycle Parking & Storage Solutions 800.783.7257 www.sarisparking.com
i#
i#
i#
i#
i#
i#
Product Information
# of Bikes
Materials
Finish
Hardware
Spacing
Anchors must be purchased separately
i#
i#
i#
i#
i#
Product Information
# of Bikes
Finish
Hardware
Spacing
Anchors must be purchased separately
Bike Tracs as manufactured by Saris
1 bike per trac
Powder coat black only
Bike Tracs
• Wide wheel track accepts all bikes• Full length tray keeps bike in place and protects wall
surface• Two locking mechanism options available
Recommended Spacing
Product Details
6006 6003C 6003T
80” minimum ceiling height
At 18” Spacing, stagger Tracs 10”At 21” Spacing, Tracs can be installed at the same height.
Recommended anchor: #6264
18”
34.75
8.4
10.0
10.0
34.75
17RECOMMENDED
MINIMUM
19.1
53.3
GROUND LEVEL
NOTES:
DO NOT SCALE DRAWING1.
INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH2. MANUFACTURER'S SPECIFICATIONS
5253 VERONA RD., MADISON WI. 537111-800-783-7257 / 1-608-274-6550
WWW.SARIS.COM WWW.CYCLEOPS.COMWWW.POWERTAP.COM
SARIS CYCLING GROUP
TITLE:
© SARIS CYCLING GROUP 2014THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE CONFIDENTIAL PROPERTY OF
SARIS CYCLING GROUP ANY REPRODUCTION IN PART OR WHOLE WITHOUTTHE WRITTEN PERMISSION OF SARIS CYCLING GROUP IS PROHIBITED.
6006 - LOCKING VERTICAL RACK
34.75
10.0
34.75
17RECOMMENDED
MINIMUM
53.0 48.0
NOTE:
DO NOT SCALE DRAWING1.
INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH2. MANUFACTURER'S SPECIFICATIONS
5253 VERONA RD., MADISON WI. 537111-800-783-7257 / 1-608-274-6550
WWW.SARIS.COM WWW.CYCLEOPS.COMWWW.POWERTAP.COM
SARIS CYCLING GROUP
TITLE:
© SARIS CYCLING GROUP 2014THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE CONFIDENTIAL PROPERTY OF
SARIS CYCLING GROUP ANY REPRODUCTION IN PART OR WHOLE WITHOUTTHE WRITTEN PERMISSION OF SARIS CYCLING GROUP IS PROHIBITED.
6003T - BIKE TRACK TRAY
10.0
34.75
34.75
17RECOMMENDED
MINIMUM
53.3 48.0
NOTE:
DO NOT SCALE DRAWING1.
INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH2. MANUFACTURER'S SPECIFICATIONS
5253 VERONA RD., MADISON WI. 537111-800-783-7257 / 1-608-274-6550
WWW.SARIS.COM WWW.CYCLEOPS.COMWWW.POWERTAP.COM
SARIS CYCLING GROUP
TITLE:
© SARIS CYCLING GROUP 2014THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE CONFIDENTIAL PROPERTY OF
SARIS CYCLING GROUP ANY REPRODUCTION IN PART OR WHOLE WITHOUTTHE WRITTEN PERMISSION OF SARIS CYCLING GROUP IS PROHIBITED.
6003C - BIKE TRACK W/LOCK
DESCRIPTIONCatalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
LUMIÈRE®
ADL121465September 21, 2015
The Lumiere Eon LED 303-A1-LEDB1 is a compact, low profile, dimmable, ground mounted LED accent lighting luminaire. It is provided with diffused lens and has been designed to allow the head to rotate 180° for accurate aiming. The luminaire mounts directly to an integral recess junction box and comes standard with an ELV, reverse phase dimming, universal input LED driver (120 - 277V, 50/60 Hz). An optional 0 - 10V dimming driver is available. The 303-A1-LEDB1 fixture may be used indoors or outdoors and carries an IP66 rating.
ConstructionThe 303-A1-LEDB1 is precision machined from corrosion-resistant 6061-T6 aluminum. It is available with either a 6”, 12” or 18”length extruded stem. Consult factory for additional lengths. The head of the luminaire can be adjusted for easy aiming. The base of the 303-A1 can be rotated 360º and locked in position. Stainless steel hardware is included.
MountingThe luminaire mounts directly to an integral black polyester powder coated recessed junction box. Located on the bottom of the integral recessed junction box are two (2) 1/2 NPSM threaded conduit entries. A direct mount stability plate is also provided.
For further mounting information see technical notes section on page 2.
OpticalLightBARTM and optical assembly are sealed by a clear, impact resistant tempered glass lens. The optical assembly is available in three distributions: T2 (lateral throw), T4 (forward throw) and T5X (Extra Wide Flood). Available in several color temperatures: 2700K, 3000K, 3500K, 4000K and TSAM (Amber). Both color temperature and distribution must be specified when ordering – see catalog logic for details. An edge-lit option is available.
ElectricalThe 8.5W 303-A1-LEDB1 is standard with an ELV trailing edge phase dimmable driver that accepts a universal input (120-277, 50/60Hz). It will operate in -40°C to 50°C [-40°F to
122°F]. The driver incorporates surge protection. An optional 0-10V dimming driver is also available.
FinishThe luminaires are double protected by a RoHS compliant chemical film undercoating and polyester powder coat paint finish. A variety of standard colors are available. RAL and custom color matches available upon request. Luminaries can also be brushed with a clear coat finish. The LightBARTM cover plates are standard white.
WarrantyLumiere warrants the EON series of fixtures against defects in material and workmanship for five (5) years. Auxiliary equipment such as LED drivers carries the original manufacturer’s warranty.
ORDERING INFORMATION
Sample Number: 303-A1-LEDB1-2700-UNV-T2-DIM10-BK-12-EDGE
NOTES: 1 Custom and RAL color matching available upon request. Consult factory for further information. 2 Stem lengths are nominal (shown in inches). 3 Add suffix in the order shown. 4 LCF option not available when WT (white) finish is selected.
Series Color Temperature Input Voltage Optics Dimming Finish 1 Stem Length 2 Options 2,3,4
303-A1-LEDB1
Head contains one (1)Mini LightBARTM
2700=2700K3000=3000K3500=3500K4000=4000KTSAM =Turtle Safe Amber (585-595nm)
UNV=Universal 120-277, 50/60Hz
T2=Type II, Lateral ThrowT4=Type IV, Forward ThrowT5X=Type V, Extra Wide Flood
DIMELV=Trailing Edge PhaseDIM10=0-10V Dimming
Painted BK=BlackBZ=BronzeCS=City SilverWT=WhitePremium FinishBA=Brushed
6=6” Stem12=12” Stem18=18” Stem
EDGE=Edge lit glass lensLCF=LightBAR cover plate matches housing finish
18”457mm
C E R T I F I C A T I O N D A T AUL and cUL Wet Location ListedLM79 / LM80 CompliantROHS CompliantIP66 Ingressed Protection Rated
T E C H N I C A L D A T A50°C Maximum Temperature RatingExternal Supply Wiring 90°C Minimum
303-A1-LEDB1EON LED
APPLICATIONS:
ACCENT GROUND MOUNT
0.75”19mm
4.6”118mm
6”153mm
12”305mm
1”25mm
4.3”109mm
3.45”87.6mm
1”25mm
3.3”85mm
Integral box has two 1/2 NPSM threaded conduit entries located on the bottom.
Integral recessed junction box to house supplied driver
GROUND LEVEL
+90º -90º
ADL121465 September 21, 2015
Specifications and dimensions subject to change without notice.
Eaton 18001 East Colfax AvenueAurora, CO 80011P: 303-393-1522www.eaton.com/lighting
Optic Type Distribution Watts Delivered Lumens LPW CCT (K) /
ColorCRI nom. /
Wavelength
T2
(Lateral Throw)
8.5
354 42 2700 95
588 71 3000 75
411 50 3500 85
648 77 4000 75
6.5 180 28 TSAM (Amber) 585-595nm
T4
(Forward Throw)
8.5
310 37 2700 95
541 65 3000 75
360 43 3500 85
568 67 4000 75
6.5 158 24 TSAM (Amber) 585-595nm
T5X
(Extra Wide Flood)
8.5
381 46 2700 95
663 80 3000 75
443 53 3500 85
698 83 4000 75
6.5 194 30 TSAM (Amber) 585-595nm
1. If luminaire will not be dimmed, the luminaire must still be ordered with DIMELV option.
2. Integral recessed junction box is 3.4 inches in diameter and has 4.3 inches below ground level. It is machined from aluminum 6061-T6 and is double protected by a RoHS compliant chemical film undercoating and black polyester powder coat paint finish. It has two 1/2 NPSM conduit entries on the bottom of the box.
3. Stabilty plate directly mounts to base of integral recess box with four (4) screws. In addition, four (4) holes to accept 3/8” threaded anchor bolts if neccessary.
TECHNICAL NOTES
LUMEN MAINTENANCE LUMENS - CRI/CCT TABLE
Ambient Temperature
TM-21 Lumen Maintenance
(72,000 Hours)
TM-21 Reported L70(10k) (Hours)
Theoretical L70 (Hours)
25°C> 94% > 60,000 365,00040°C
50°C
Model Line Voltage Current Draw
303-A1-LEDB1 120-277V, 50/60Hz 0.068A
CURRENT DRAW
Edge
When specifying with the EDGE option, the diffuse glass lens is replaced with a thicker diffuse glass lens adding a visible line of light around the edge accentuating the luminaries’ aesthetics and styling.
OPTIONS
Edge Glow
NOTES: 1 When the LCF option is selected use a lumen multiplier of .85
Photometric performance is measured in accordance with IESNA LM-79. Visit focalpointlights.com for complete photometric data.
Focal Point LLC | 4141 S. Pulaski Rd, Chicago, IL 60632 | 773.247.9494 | focalpointlights.com | @focalpointlight
id® 4.5" LED WALL WASH
DIMENSIONAL DATA FEATURES
PRODUCT OVERVIEW
PERFORMANCE
wall wash
trim
4.50"114mm
5.50"140mm11.56"
293.55mm
4.50"114mm
5.97
"15
1.70
mm
1.00"25mm
13.20"335.18mm
May 2015 W
Lumen Output: 809-2026lm
Wattage: 16-41W
LPW: 49-50
SDCM: 3
Lumen L70 @ Maintenance: 50,000hrs
LED module features remote phosphor technology enabling a high system efficacy and minimum 80 CRI.
Intelligent driver delivers specified lumen output regardless of color temperature.
Flicker-free 0-10V analog dimming capability standard.
Low profile housing.
LED module tilted to deliver excellent wall wash performance.
Clear Diffuse Reflector 3000k, 1500 Lumen LED
Module
Delivered Lumens: 1053lm
Total System Watts: 21W
clear diffuse warm diffuse
Focal Point LLC reserves the right to change specifications for product improvement without notification.
fixture:
project:
HOUSING TYPES (Note: Wall wash must be positioned perpendicular to length of technical zone.) HOUSING ORDERINGHousing Series
ID LED Round FL4WID LED Round for mounting between 6" on center tees FL4WFT
(Not recommended with single-tile spacing between fixtures due to ceiling tile interference)
Trim TypeRound Flush RF
Round Overlap RONominal Output
1100 Lumen LED Module 11LED1500 Lumen LED Module 15LED2000 Lumen LED Module 20LED3000 Lumen LED Module 30LED
Color Temperature 3000K 30K 3500K 35K 4000K 40K
Voltage120V 120277V 277
Driver 0-10V Dimming LD1
Lutron A-Series EcoSystem L3D(Not available with 30LED)
(consult factory for 3-wire control)
Housing Type TThermally Protected, Non-IC T
Factory OptionsBar Hangers BH
(FL4W only)
Chicago Plenum CP(Not available with 30LED)
Lutron EcoSystem Translator TVI(30LED only, above ceiling access only)
Emergency BatteryConsult EM specific cutsheet
TRIM ORDERINGAperture L4
4.5" Roung Reflector L4Trim Type RD
Round RDOptic WW
Lensed Wall Wash WW(Wet location)
ColorClear Diffuse CDWarm Diffuse WD
Flange FinishNon-Painted NP
White Painted WP
A complete unit consists of two line items, housing and trimExample: FL4W-RO-15LED-30K-120-LD1-T | L4-RD-WW-CD-NP
HOUSING SPECIFICATIONS
LED SystemPowered by Philips’ Fortimo™ LED DLM, Advance Xitanium LED driver and communication cable. Aluminum heat sink provides appropriate thermal management.
LED ModulePhilips’ Fortimo™ LED DLM features patented remote phosphor technology for superior efficacy and color consistency. Module may be specified in 3000K, 3500K or 4000K, CRI>80.
ConstructionThermally protected housing for new construction applications. Insulation to be kept 3” away from housing. Butterfly brackets allow mounting to ½ emt. Order bar hangers as an accessory. Die–cast aluminum heat sink designed for maximum thermal dissipation. Die-formed housing and integral junction box with (7) 1⁄2” pry outs. Accommodates ceiling thicknesses up to 1” (FL4W) or 2” (FL4WFT). FL4WFT housing includes mounting clips to integrate between 6” on center tees. Fixture will not exceed 5 lb. 18” O.C. fixture to wall and 36” O.C. fixture to fixture spacing required.
ElectricalAdvance Xitanium multi-volt 120V-277V constant current driver includes standard 0-10V analog dimming. Power factor >.9 typical, 50/60Hz., 200-700mA. “Thermal Guard” offers protection from overheating in abnormal conditions; driver will dim DLM if necessary. Voltage specific thermal protectors included standard. 3000 lumen versions integrate an active cooling solution not recommended for quiet applications.
Dimming0-10V DC low voltage dimming capability is included with the standard Advance Xitanium driver. Dimming range is to 10% light output, some dimmers may require high and/or low end trim adjustment for proper function.
LabelsUL and cUL listed. Suitable for Dry or Damp Locations, indoor use only. Lensed trims suitable for Wet Location.
Lumen MaintenanceL70 at 50,000 hours
WarrantyLED System rated for operation in ambient environments up to 25°C. 5 year limited warranty.
TRIM SPECIFICATIONS
AestheticsParabolic reflector cone ensures glare free optics. Reflector is .050 spun aluminum. Torsion springs pull trim tight to the ceiling with no visible fasteners within the trim. Trims are self-flanged, non-painted to match reflector finish. White painted flange may also be specified.
OpticsWall wash features high reflectance white kicker reflector and Prismatic tempered glass diffuser to provide smooth illumination down the wall.
PERFORMANCE CHART
*For more information visit focalpointlights.com/reference or consult factory.
Nominal Output Color Temp System Watts Delivered Lumens LPW
11LED 3000K 16 809 49.4
15LED 3000K 21 1053 50.1
20LED 3000K 29 1419 49.5
30LED 3000K 41 2026 50.0
*Based on Clear Diffuse reflector cone. Rated Output is the same for all color temps. Wattage reduction with other color temps.Lumen output may vary +/- 5%. Actual wattage may vary +/- 5%.
FL4WFT
180° 170° 160° 150° 140°
0° 10°
-170°
-10° 20°
-160°
-20° 30°
-150°
-30° 40°
-140°
-40°
0° 45°
90°
0° 45°
90°
130°
120°
110°
100°
90°
80°
70°
60°
50°
-130°
-120°
-110°
-100°
-90°
-80°
-70°
-60°
-50°
FL4W-ro-15Led-L30-120-Ld1-t / L4-rd-WW-cdFilename: FL4WWCD15LEDL30.IES Lumens: 1053lm
Test #: 101418870CHI-010 System Watts: 21W
LPW: 50
180° 170° 160° 150° 140°
0° 10°
-170°
-10° 20°
-160°
-20° 30°
-150°
-30° 40°
-140°
-40°
0° 45°
90°
0° 45°
90°
130°
120°
110°
100°
90°
80°
70°
60°
50°
-130°
-120°
-110°
-100°
-90°
-80°
-70°
-60°
-50°
FL4W-ro-11Led-L30-120-Ld1-t / L4-rd-WW-cdFilename: FL4WWCD11LEDL30.IES Lumens: 809lm
Test #: 101418870CHI-009 System Watts: 16W
LPW: 49
Zone Lumens%
Fixture
0-30˚ 316.7 39.2
0-40˚ 446.2 55.2
0-60˚ 576.2 71.2
Total Luminaire
0-90˚ 623.6 77.1
0-180˚ 808.8 100.0
Zone Lumens%
Fixture
0-30˚ 403.6 38.3
0-40˚ 568.6 54.0
0-60˚ 735.8 69.9
Total Luminaire
0-90˚ 795.7 75.6
0-180˚ 1053 100.0
Go to www.focalpointlights.com for additional photometric data.
Go to www.focalpointlights.com for additional photometric data.
Vertical Angle
Horizontal Angle0° 22.5° 45° 67.5° 90°
0˚ 543 543 543 543 543
5˚ 604 596 580 556 528
15˚ 629 612 569 505 430
25˚ 563 540 481 391 284
35˚ 441 416 346 241 150
45˚ 262 238 181 118 72
55˚ 125 113 88 58 31
65˚ 62 56 43 37 12
75˚ 24 22 22 12 4
85˚ 2 11 33 10 2
90˚ 1 20 43 13 2
95˚ 2 20 33 18 4
105˚ 4 28 48 48 19
115˚ 56 57 64 59 28
125˚ 72 68 67 61 38
135˚ 76 68 58 57 44
145˚ 67 62 54 53 46
155˚ 54 49 36 44 41
165˚ 6 7 7 13 15
175˚ 1 1 1 1 1
180˚ 1 1 1 1 1
Vertical Angle
Horizontal Angle0° 22.5° 45° 67.5° 90°
0˚ 693 693 693 693 693
5˚ 774 764 742 711 674
15˚ 806 786 730 646 548
25˚ 718 692 614 498 360
35˚ 563 531 439 308 192
45˚ 334 306 234 152 92
55˚ 159 146 114 74 39
65˚ 79 72 55 46 17
75˚ 31 28 28 15 6
85˚ 2 13 45 14 2
90˚ 2 24 53 15 2
95˚ 3 23 41 21 5
105˚ 5 34 66 61 24
115˚ 92 94 84 74 38
125˚ 115 108 89 81 52
135˚ 116 102 84 82 61
145˚ 102 94 79 79 64
155˚ 88 83 64 64 57
165˚ 17 13 11 16 20
175˚ 1 1 1 2 1
180˚ 1 1 1 1 1
id® 4.5"Led WaLL Wash
id® 4.5"Led WaLL Wash
caNdeLPoWer dIstrIBUtIoN
caNdeLPoWer dIstrIBUtIoN
LUMeN sUMMarY
LUMeN sUMMarY
180° 170° 160° 150° 140°
0° 10°
-170°
-10° 20°
-160°
-20° 30°
-150°
-30° 40°
-140°
-40°
0° 45°
90°
0° 45°
90°
130°
120°
110°
100°
90°
80°
70°
60°
50°
-130°
-120°
-110°
-100°
-90°
-80°
-70°
-60°
-50°
180° 170° 160° 150° 140°
0° 10°
-170°
-10° 20°
-160°
-20° 30°
-150°
-30° 40°
-140°
-40°
0° 45°
90°
0° 45°
90°
130°
120°
110°
100°
90°
80°
70°
60°
50°
-130°
-120°
-110°
-100°
-90°
-80°
-70°
-60°
-50°
FL4W-ro-30Led-L30-120-Ld1-t / L4-rd-WW-cdFilename: FL4WWCD30LEDL30.IES Lumens: 2026lm
Test #: 101418870CHI-012 System Watts: 41W
LPW: 50
FL4W-ro-20Led-L30-120-Ld1-t / L4-rd-WW-cdFilename: FL4WWCD20LEDL30.IES Lumens: 1419lm
Test #: 101418870CHI-011 System Watts: 29W
LPW: 49
Zone Lumens%
Fixture
0-30˚ 529.7 37.3
0-40˚ 751.9 53.0
0-60˚ 981.6 69.2
Total Luminaire
0-90˚ 1065 75.1
0-180˚ 1419 100.0
Zone Lumens%
Fixture
0-30˚ 766.5 37.8
0-40˚ 1088 53.7
0-60˚ 1421 70.1
Total Luminaire
0-90˚ 1543 76.2
0-180˚ 2026 100.0
Go to www.focalpointlights.com for additional photometric data.
Go to www.focalpointlights.com for additional photometric data.
Vertical Angle
Horizontal Angle0° 22.5° 45° 67.5° 90°
0˚ 901 901 901 901 901
5˚ 1027 1010 975 927 873
15˚ 1090 1063 975 850 706
25˚ 985 947 830 660 461
35˚ 791 740 603 409 248
45˚ 484 439 323 203 120
55˚ 231 212 160 100 52
65˚ 114 104 78 63 22
75˚ 46 42 37 21 8
85˚ 6 19 61 16 3
90˚ 2 34 77 23 3
95˚ 3 36 58 28 6
105˚ 6 47 88 81 30
115˚ 117 122 114 101 51
125˚ 154 147 133 108 75
135˚ 158 143 120 109 85
145˚ 142 127 111 105 90
155˚ 123 117 99 86 79
165˚ 45 36 15 24 28
175˚ 2 3 3 3 2
180˚
Vertical Angle
Horizontal Angle0° 22.5° 45° 67.5° 90°
0˚ 1305 1305 1305 1305 1305
5˚ 1480 1459 1410 1342 1264
15˚ 1576 1537 1412 1231 1026
25˚ 1426 1371 1203 955 668
35˚ 1141 1071 876 592 359
45˚ 700 637 470 295 172
55˚ 337 308 233 146 75
65˚ 165 152 114 89 33
75˚ 67 62 55 32 11
85˚ 8 30 82 21 4
90˚ 2 53 109 29 4
95˚ 5 54 77 39 8
105˚ 10 63 91 99 45
115˚ 135 160 157 147 79
125˚ 220 211 174 160 105
135˚ 212 203 160 154 118
145˚ 188 178 147 144 125
155˚ 155 147 126 112 111
165˚ 46 40 21 34 40
175˚ 3 4 4 4 3
180˚ 2 2 2 2 2
id® 4.5"Led WaLL Wash
id® 4.5"Led WaLL Wash
caNdeLPoWer dIstrIBUtIoN
caNdeLPoWer dIstrIBUtIoN
LUMeN sUMMarY
LUMeN sUMMarY
| Recessed HID322 Information contained herein is subject to change without notice.
FEATURES
ORDERING INFORMATION
EXAMPLE OMH60 - 100PS - ED17MP/MED - CS - OPTIONS - MB1 - 120 t t t t t t t SERIES WATTAGE LAMP REFLECTOR OPTIONS BALLAST VOLTAGE BASE FINISH TYPE
6” | 7.5”OMH60 | OMH75 Round Open-Rated Downlight
LGV31096.010611MP
OMH60 shown
Medium-size apertures are ideal for general illumination. The OMH Series is open-rated for use with MP Series lamps. HID sources provide long lamp life and energy efficiency with more lumens-per-watt output than compact fluorescent or incandescent. • Self-flanged aluminum reflector prevents light
leaks and is available in assorted colors. • Finned, extruded aluminum heat sink socket
housing dissipates heat for cooler operation.
• Adjustable hanger brackets with bar hangers standard.
• Easy-access, 14-gauge galvanized steel junction box with two snap-on covers.
• Sturdy one-piece pan construction. • This fixture is proudly made in the USA.
SERIESOMH60 6” Round Open-Rated DownlightOMH75 7.5” Round Open-Rated Downlight
LAMP OPTIONSOMH60 LAMP OPTIONS
WATTAGE LAMP BASE50PS, 70PS, or 100PS ED17MP/MED
OMH75 LAMP OPTIONSWATTAGE LAMP BASE
50PS, 70PS, 100PS, or 150PS1 ED17MP/MED
REFLECTOR FINISHSee page 427 for trim options.CS Clear semi-specular (standard)SPC Clear specularCG Champagne goldGD GoldPW PewterSG Satin-glowSTR Straw WT Wheat
OPTIONSSee page 427 for lens/trim options.F Fuse (must specify voltage)MB2 Micro-baffle2
MWT Matte white trim
OPTIONS (Continued)LD Luminous disk LDO Luminous disk openLR Luminous ringPFS/__ Perforated shield (must specify LD,
LDO, or LR)QRS3 Quartz restrike3
RETRO Retrofit Mounting Pan Assembly, see page 428 for details (magnetic ballast must be remote)
SCA__º Sloped Ceiling Adapter (Specify degree of slope in 5º increments, 10º - 30º. SCA increases fixture height, see page 428 for details.)
WW Wall wash (not available with MB)YOKE Yoke-mount reflector
BALLAST TYPE (Must specify voltage)MB1 1-lamp magnetic ballastEB1 1-lamp electronic ballast
VOLTAGE (Must specify)120 120V277 277V
1 Available with OMH75, electronic ballast (EB1) only.2 Not for use with LD, LDO, LR, or PFS/__ options.3 Restrike lamp by others. Must not exceed lamp wattage for
MB1. Consult factory for use with EB1.
9-11/16”
ø8-1/2”
ø7-1/2”
OMH75Pan Size: 12” x 16-1/4”Ceiling Cutout: ø8-1/8”
Pan Size with SCA: 17” x 23”Cutout with SCA: ø10-5/8”
8-3/16”
ø5-7/8”
ø7-1/8”
OMH60Pan Size: 12” x 16-1/4”Ceiling Cutout: ø6-1/2”
Pan Size with SCA: 12” x 16-1/4”Cutout with SCA: ø9-1/8”
QUANTITY ESTIMATORItem #: OMH60-100PS
Room Size ± 50 fc. ± 75 fc. ± 100 fc. 20’ x 20’ (400 sq. ft.) 6 9 930’ x 30’ (900 sq. ft.) 9 16 2040’ x 40’ (1,600 sq. ft.) 16 30 36
Calculations based on standard reflectance of 80/50/20 and a light loss factor of 1.0 with a 10’-0” ceiling height.
• Housing – 20-gauge, die-formed, galvanized steel pan/plaster frame.
• Reflector – Low-iridescent aluminum. Clear semi-specular (CS) finish standard.
• Electrical – Open-rated porcelain socket. Prewired at factory for easy field installation. Electronic ballast: Rated 0ºF minimum starting temperature. Magnetic ballast: Rated -20ºF minimum starting temperature.
• Mounting – Recessed. • Labels – UL/CUL listed for through-branch circuit
wiring and dry or damp locations.
SPECIFICATIONSCross sections are shown with magnetic ballast.
H.E . W ill iams, Inc . C ar thage, Missour i w w w.hewilliams . com 417-35 8 - 4 0 6 5 F a x : 417-35 8 - 6 015
VOLTAGE:
SUBMITTAL:
JOB:
TYPE:
Recessed HIDPage 16A
OMH75 SERIES HOUSING — 20-gauge, die-formed, galvanized steel pan/plaster frame.
ELECTRICAL Porcelain socket. Prewired at factory for easy field installation. ELECTRONIC BALLAST — Rated 0ºF minimum starting temperature. MAGNETIC BALLAST — Rated -20ºF minimum starting temperature.
REFLECTOR Low-iridescent aluminum. Clear semi-specular (CS) finish standard.
EXAMPLE: OMH75 - 150PS - ED17MP/MED - CS - OPTIONS - EB1 - 120 t t t t t t t SERIES WAT TAGE L AMP BASE REFLEC TOR OP T IONS BALL AST VOLTAGE F INISH
SERIES FEATURES
XX Open-rated downlight for use with MP Series lamps.XX Self-flanged aluminum reflector prevents
light leaks.XX Finned, extruded aluminum heat sink socket
housing dissipates heat for cooler operation.XX Adjustable hanger brackets with bar hangers
standard.XX Easy-access, 14-gauge galvanized steel
junction box with two snap-on covers.XX 20-gauge, die-formed, galvanized steel pan/
plaster frame.XX Self-flanged, low-iridescent aluminum
reflector available in assorted colors.
9-11/16”
ø7-1/2”
ø8-1/2”
PAN SIZE: 12” x 16-1/4” PAN SIZE w/SCA: 17” x 23” CEILING CUT OUT: 8-1/8” dia. CUT OUT w/SCA: 10-5/8” dia.
LAMP OPTIONS (Must specify)
ELECTRONIC BALLAST MAGNETIC BALLASTWATTAGE LAMP BASE BALLAST WATTAGE LAMP BASE BALLAST
50PS ED17MP/MED EB1 50PS ED17MP/MED MB170PS ED17MP/MED EB1 70PS ED17MP/MED MB1100PS ED17MP/MED EB1 100PS ED17MP/MED MB1150PS ED17MP/MED EB1
REFLECTOR FINISH (Must specify)
CS Clear semi-specular (Standard) SG Satin-glow CG Champagne gold SPC Clear specularGD Gold STR StrawPW Pewter WT Wheat
OPTIONS
F Fuse (120V and 277V only) PFS/__ Perforated shield with LD, LDO, or LR (Please specify)
LD Luminous disk QRS2 Quartz restrike (T4 lamp, D.C. bayonet base)2
LDO Luminous disk open RETRO Retrofit Mounting Pan Assembly (Magnetic ballast must be remote.) See Williams Downlighting Information for RETRO specifications.
LR Luminous ring SCA__º Sloped Ceiling Adapter (Specify degree of slope in 5º increments, 10º-30º. SCA increases fixture height. Consult factory for details.)
MB1 Micro-baffle1 WW Wall wash (not available with MB)MWT Matte white trim YOKE Yoke-mount reflector
VOLTAGE (Must specify)
120 120V 208 208V (MB1 only)240 240V (MB1 only) 277 277V
7.5” OPEN-RATED HID DOWNLIGHT OMH75
This fixture is proudly made in the USA.
June 15, 2009
1 Not for use with LD, LDO, LR, or PFS/__ options.
2 Restrike lamp by others. Must not exceed lamp wattage for MB1. Consult factory for use with EB1.
H.E . W ill iams, Inc . C ar thage, Missour i w w w.hewilliams . com 417-35 8 - 4 0 6 5 F a x : 417-35 8 - 6 015Information contained herein is subject to change without notice.
Recessed HID Page 16B HEWJP33924 06/12/12JJ
PHOTOMETRY DESCRIPTION •1/150WCoated Metal Halide •7.5”dia.Recessed Luminaire •Low-Iridescent Specular Reflector with Open Bottom
PHOTOMETRY INFORMATION
Williams Downlighting Catalog # OMH75-150PS-ED17-MP/MED Test Report # 8202.0Date 02/14/95 Lamp Type: M102 (MP150/C/U/MED)
Lamp Quantity: 1 Rated Lumens: 13500. CANDLEPOWER DISTRIBUTION
VERTICAL ANGLE
AVERAGECANDELA
90°
0° 10°20°
30°
40°
50°
60°
70°
80° 0 9481. 5 9461. 903.115 8259. 2341.125 6358. 3026.235 3571. 2243.345 943. 730.355 52. 46.765 3. 3.075 0. .085 0. .090 0.
LUMEN SUMMARY ZONAL CAVITY COEFFICIENTS
ZONE LUMENS %LAMP % FIXTURE0 - 30 6270. 46.4 67.50 - 40 8514. 63.1 91.60 - 60 9291. 68.8 100.00 - 90 9294. 68.8 100.0TOTAL LUMINAIRE:0 - 180 9294. 68.8 100.0IES SPACING CRITERIA: ADJACENT=1.0 DIAG.=.7
EFFECTIVE FLOOR CAVITY REFL. = .20CEILING .80 .70 .50
WALL RCR .70 .50 .30 .70 .50 .30 .50 .30 .100 .82 .82 .82 .80 .80 .80 .76 .76 .761 .78 .77 .75 .77 .75 .74 .72 .71 .702 .75 .72 .69 .73 .70 .68 .68 .66 .643 .71 .67 .64 .70 .66 .63 .64 .62 .604 .68 .63 .59 .66 .62 .58 .60 .57 .555 .64 .58 .55 .63 .58 .54 .57 .53 .516 .61 .55 .51 .60 .54 .51 .53 .50 .487 .58 .52 .48 .57 .51 .47 .50 .47 .448 .55 .48 .44 .54 .48 .44 .47 .43 .419 .51 .45 .40 .51 .44 .40 .44 .40 .37
10 .48 .41 .37 .48 .41 .37 .41 .37 .35 LIGHT CONE QUICK CALCULATOR TABLES LUMINANCE DATA (cd/m2)
Mounting Height (Ft)
FC at Edge of Cone
FC at Nadir
Cone Dia. (Feet)Across Diagonal
8 74.1 148.1 8.0 5.610 47.4 94.8 10.0 7.012 32.9 65.8 12.0 8.414 24.2 48.4 14.0 9.816 18.5 37.0 16.0 11.218 14.6 29.3 18.0 12.620 11.9 23.7 20.0 14.0
VERTICAL ANGLE
HORZ. ANGLE
45 46785.55 3179.65 250.75 0.85 0.
MAXIMUM BRIGHTNESS NOT MEASURED
FIXTURE QUANTITY ESTIMATOR TABLE COLOR CONVERSION FACTORS
REFLECTANCE: Ceiling = 80% Walls = 50% Floor = 20%LIGHT LOSS FACTOR: 1.0
Room Size - 10’ Ceiling ±50 fc ±75 fc ±.100 fcSmall - 400 Sq Ft 2 4 4
Medium - 900 Sq Ft 6 9 12Large - 1600 Sq Ft 9 16 20
Straw = x .97Champagne = x .96Micro-Baffle = x .60Gold = x .93Wheat = x .88Pewter = x .86
OMH75 7.5” OPEN-RATED HID DOWNLIGHT
LABELS UL/CUL listed for through-
branch circuit wiring and dry or damp locations.
© 2014 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
HOUSING - Rectangular shaped, multi-radiused, one-piece, die-cast aluminum with cast mounting arm. All hardware is stainless steel or electro-zinc plated steel.
DOOR FRAME - One-piece, die-cast aluminum door frame secures to the housing with two internal hinges. Two stainless steel captive door fasteners allow easy access. A one-piece extruded silicone gasket seals the door frame against the housing. The standard housing/door seal design prevents external contaminants from entering the Challenger, resulting in an IP65 rating for all versions.
LENS/GASKET - Contoured clear impact resistant glass lens for vertical lamp optics. A tempered flat clear glass lens or contoured clear impact resistant glass lens is offered for horizontal lamp optics. A one-piece extruded silicone gasket seals the lens to the die-cast aluminum door frame.
SOCKETS - Porcelain mogul-base sockets. All sockets are factory prewired with a disconnect plug for the ballast. All sockets are pulse-rated.
LIGHT SOURCES - Pulse-Start Metal Halide, Natural White Pulse-Start Metal Halide, Metal Halide Reduced Envelope, or High Pressure Sodium. Clear lamp is supplied as standard.
BALLASTS - High-power factor ballast with removable/hinged ballast tray. Pulse-Start Metal Halide (250, 320, 400, 750 and 1000 watt), 775 watt Natural White Pulse-Start Metal Halide, Metal Halide, and High Pressure Sodium fixtures feature a CWA type ballast. The 575 watt Natural White Pulse-Start Metal Halide fixtures feature HX-HPF type ballasts. All ballasts are designed for -20 F operation.
CHALLENGER® (Various reflectors are protected by U.S. Patent No. 6,464,378.)
Flat-lensed fixturesmeet IESNA
full cutoffclassification
COMMUNITyFRIENDLy
DIMENSIONS
SHIPPING WEIGHTS - Challenger
Upsweep Bracket - BKU-BO-S-19Weight (7kg)15lbs. E.P.A. = 0.4
(165mm)6-1/2"
(305mm)12"
(89mm)3-1/2"(89mm)
3-1/2"
(711mm)28"
(508mm)20"
(64mm)2 1/2"
(457mm)18"
(60mm)2-3/8"
1.8 2.0
3.7 4.1
Single
D180°
D90°
T90°
TN120°
Q90°
F CT2.2 2.3
4.3 4.6
3.9 4.3
6.1 6.5
6.3 6.9
7.7 8.6
F CT
Note: F - Flat Glass CT - Contoured
LUMINAIRE EPA CHART - ChallengerCast Arm With Extension Arm
Extension ArmRequired
Note: House Side Shield adds to fixture EPA. Consult factory.
Catalog Number Est. Weight (kg/lbs.) Length (mm/in.) Width (mm/in.) Height (mm/in.)CHVCHH
41 / 9139 / 86
87 / 34.587 / 34.5
603 / 23.75603 / 23.75
464 / 18.25464 / 18.25
IP65wet location
REFLECTORS/DISTRIBUTION PATTERNS - Vertical Burn systems include: Type II (2), Type III ( 3), Type V (5), Perimeter Forward Throw (FP), Automotive Forward Throw (FA), and ART (Advanced Reflector Technology) optical systems: Automotive Forward Throw (AFT) and Automotive Interior (AI). Horizontal Burn systems include: Type III (3), Type V (5) and Forward Throw (FT). All reflectors are field-rotatable, enabling generous flexibility in distribution patterns, without fixture movement. Photometric data is tested in accordance with IESNA guidelines.
BRACKETS - Use with 5” traditional drilling pattern. Cast mounting arm is flat for square pole applications. Fixture may also be mounted to round poles using the round pole adaptor accessory (RPPC), which must be ordered separately. An extruded 6” arm extension is required for D90°, Q90°, T90° and TN 120° fixture configurations. A locking nut secures two through bolts and a reinforcing plate to the pole, stabilizing it for easy fixture mounting.
FINISHES - Each fixture is finished with LSI’s DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling, and is guaranteed for five full years. Standard colors include bronze, black, platinum plus, white, satin verde green, metallic silver, and graphite.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed photometric data.
ARRAFunding Compliant
126
OU
TD
OO
R
02/05/14
© 2014 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
CHALLENGER®
TYPICAL ORDER EXAMPLE:
LuminairePrefix Distribution Light Source
LUMINAIRE ORDERING INFORMATION
LampWattage
ACCESSORY ORDERING INFORMATIONDescription Order Number Description Order Number
(Accessories are field installed)
143587BLK+++143587BLK+++143587BLK+++
141940CLR123111CLR
142862CLR144191CLR
CHH/CHV 3 HSS – External House Side ShieldCHV FA/AFT HSS – External House Side ShieldCHH/CHV FP/FT HSS – External House Side ShieldRPPC – Round Pole PlateBKS-BO-WM-*-CLR Wall Mount PlateBKA-BO-EC-6-CLR Extension ArmRequired for multiple mounting @ all 90o & 120o configurationsBKU-BO-S-19-CLR Upsweep Bracket for round and square poles
LineVoltage
LuminaireFinish Options
480MT – Multi TapTT – Tri-Tap
BRZ – BronzeBLK – BlackPLP – Platinum PlusWHT – WhiteSVG - Satin Verde GreenGPT - GraphiteMSV - Metallic Silver
CT – Contoured Clear Impact-resistant Glass
F – Flat Clear Tempered Glass
CT – Contoured Clear Impact-resistant Glass 3
PSMV – Pulse-Start Metal Halide 250, 320, 400, 750, 1000 1 WattNWPSMV – Pulse-Start Metal Halide Natural White 575, 775 WattMHR – Metal Halide Reduced Envelope 1000 WattHPS – High Pressure Sodium 250,400,750 2 WattPSMV – Pulse-Start Metal Halide 750, 10001 WattNWPSMV – Pulse-Start Metal Halide Natural White 575, 775 WattMHR – Metal Halide Reduced Envelope 1000 Watt
PSMH – Pulse-Start Metal Halide 250, 320, 400, 750, 1000 1
NWPSMH – Pulse-Start Metal Halide Natural White 775 WattMHR – Metal Halide Reduced Envelope 1000 WattHPS – High Pressure Sodium 250, 400, 7502 Watt
2503204005757507751000
5757507751000
2503204007507751000
2-Type II3-Type III5 - Type VFP- Forward Throw PerimeterFA-Automotive Foward Throw
Advanced Reflector Technology Optical Systems:AFT-Automotive Foward ThrowAI-Automotive Interior
3 – Type IIIFT– Forward Throw5 – Type V
Vertical BurnCHV
Horizontal Burn CHH
PCR - Photoelectric Control Receptacle 4
LL - Less Lamp
FOOTNOTES:1- Tri-Tap not available in 1000 Watt PSMV. Voltage must be specified – 120V, 277V, or 347V.2- When ordering 750 Watt High Pressure Sodium, voltage must be specified.3- Use to match vertical appearance.4- Factory installed PCR requires field wiring to proper voltage. Photocell must be ordered seperately, see Accessories.
HOUSE SIDE SHIELD
CHV 5 1000 MHR CT MT MSV PCR
PC120 – PhotocellPC208-277 – Photocell for 208V, 240V or 277VPC347 – PhotocellPC480 – PhotocellFK120 - Single Fusing FK277 - Single FusingDFK208, 240 - Double FusingDFK480 - Double Fusing FK347 - Single FusingCHH/CHV 2 HSS – External House Side Shield
122514+122515+159516+1225180+FK120++FK277++
DFK208, 240++DFK480++FK347++
143586BLK+++
Lens
Consult Factoryfor International
Voltages and Light Sources
+ Factory installed PCR option required.++Fusing must be located in the hand-hole of the pole- not in the fixture+++ Black only.
4-5/16”
3-5/8”
TYPE II(143586BLK)
TYPE III AND FORWARD THROW (FA/FP/AFT)
(143587BLK)5-3/8”
8-7/8”
MT – Multi Tap consists of 120V, 208V, 240V and 277V and is prepared for highest voltage. Alternate voltages will require field adjustment.
TT – Tri-Tap consists of 120V, 277V and 347V and is shipped standard for Canadian applications and is prepared for highest voltage. Alternate
voltages will require field adjustment.
OU
TD
OO
R
02/05/14
127
© 2015 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
10/21/15
LED LIFESTYLE MEDIUM DECORATIVE AREA LIGHTS (XDLM)
SMARTTEC™ - LSI drivers feature integral sensor which reduces drive current when ambient temperatures exceed rated temperature
ENERGY SAVING CONTROL OPTION - DIM - 0-10 volt dimming enabled with controls by others. BLS - Bi-level switching responds to external line voltage signal from separate 120-277V controller or sensor (by others), with low light level decreased to 30% maximum drive current.
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of installation location.
LEDS - Select high-brightness LEDs in Cool White (5000K), Neutral White (4000K), or Warm White (3500K) color temperature. 70 CRI CW. 80 CRI NW and WW.
DISTRIBUTION PATTERN - Types 3, FT and 5. Exceptional uniformity creates bright environment at lower light levels. Improved backlight cutoff minimizes light trespass.
CROWN - Cast aluminum. Wiring emerges from crown through compression seal fitting to prevent water entry. One-piece silicone gasket seals crown to shade for water- and dust-tight construction.
SHADES - Spun aluminum. Two shade styles available - A - Angle and B - Bell.
OPTICAL UNIT - Optical unit and aluminum door frame recessed into shade and sealed with one-piece silicone gasket. Clear tempered flat glass lens sealed with silicone gasket to door frame (includes pressure-stabilizing breather). Optical unit is tethered and provides access to driver. Door frame retaining fasteners are captive.
BRACKETS - Brackets are extruded and cast aluminum assemblies or fabrications. All decorative elements are die cast or extruded aluminum.
MOUNTING - Classic Hook (CH), Side Arm (SA - 4” O.D. minimum pole top required), Wall Mount (W - for use SA style), Universal Pole Clamp (UCL) available. See Steel Round Pole and Aluminum Round Pole data sheets for pole selection information. Side Arm pole mount requires 3” reduced drilling pattern. Classic hook mount requires a 4” O.D. pole or tenon.
ELECTRICAL - Two-stage surge protection (including separate surge protection built into electronic driver) meets IEEE C62.41.2-2002, Location Category C. Available with universal voltage power supply 120-277VAC (UE - 50/60Hz input), and 347-480 VAC. Optional button-type photocells (PCI) are available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified).
DRIVERS - Available in SS (Super Saver) and HO (High Output) drive currents (Drive currents are factory programmed.). Components are fully encased in potting material for moisture resistance. Driver complies with FCC standards. Driver and key electronic components can easily be accessed.
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F).
FINISH - Each fixture is finished with LSI’s DuraGrip polyester powder coat process. The DuraGrip finish withstands extreme weather changes without cracking or peeling.
WARRANTY - LSI LED fixtures carry a limited 5-year warranty.
PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed photometric data.
SHIPPING WEIGHT (IN CARTON) - 36 lbs. (16.3 kg)
LISTINGS - UL listed to U.S. and Canadian safety standards. Suitable for wet locations
This product, or selected versions of this product, meet the standards listed below. Please consult factory for your specific requirements.
ARRAFunding Compliant
wet location
US patent 7,828,456 8,002,428, 8,177,386 8,434,893 8,567,983 and US & int’l. patents pending
SS
HO
SS
HO
LIGHT OUTPUT - XDLMLumens (Nominal)
Type 3 Type FT Type 5 (Nominal)Watts
Cool
Whi
teNe
utra
lW
hite
LED Chips are frequently updated therefore values may increase.
SS
HOWar
mW
hite
13470 14080 13310 136
18730 19920 18480 205
11180 11780 11130 136
18070 19370 18080 205
11440 11980 11040 136
15380 16350 15130 205
DARK-SKY FRIENDLY
© 2015 LSI INDUSTRIES INC.
Project Name Fixture Type
Catalog #
10/21/15
LED LIFESTYLE MEDIUM DECORATIVE AREA LIGHTS (XDLM)
Prefix
XDLMA1
AngleShade
XDLMB1
BellShade
LED SS - Super Saver
HO - High Output
UE - Universal Electronic
(120-277V)
347-480UniversalVoltage
(347-480V)
BLK - BlackBRZ - BronzeWHT - WhiteGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde Green
S - SingleD180 - Double D90 - Double4 T90 - Triple4
TN120 - Triple4
Q90 - Quad4
W - Wall Mount (For use with Side Arm Mounting Style)
CW - Cool White (5000K) NW - Neutral White (4000K) WW - Warm White (3500K)
3 - Type III5 - Type VFT - ForwardThrow
Color TempDrive
CurrentDistributionLight
SourceMounting
Configuration1,2
CH - Classic HookSA4 - Side Arm Mount for 4" O.D. Round Poles3
SA5 - Side Arm Mount for 5" O.D. Round Poles3
UCL4 - Universal Pole Clamp for 4" O.D. Round PolesUCL5 - Universal Pole Clamp for 5" O.D. Round Poles
Mounting Style1,2Input Voltage Finish
TYPICAL ORDER EXAMPLE:
PRODUCT ORDERING INFORMATION
XDLMB 3 LED SS CW UE BLK CH S PCI120
DIMENSIONS22-5/8”
(575mm)
22”(560mm)
27-5/8” (702mm)
19-3/8”(493mm)19-3/8”
(493mm)
SIDE ARM (SA4 S) - ANGLE SHADE
SIDE ARM (SA4 S) - BELL SHADE
CLASSIC HOOK (CH S) - ANGLE SHADE CLASSIC HOOK (CH S) - BELL SHADE
22-5/8”(575mm)
22”(560mm)
27-5/8” (702mm)
27-5/8” (702mm) 27-5/8” (702mm)
Options
Button Type PhotocellsPCI120 - 120V PCI208-277V - 208-277VPCI347 - 347VDIM - 0-10 Volt Dimming (from external signal)5 BLS - Bi-level Switching (from external 120-277V signal)5
R 12-7/16”(316mm)
24-7/8” (632mm)
Slipfits 4”Poleor
Tenon
R 12-7/16”(316mm)
24-7/8” (632mm)
42”(1067mm)
10”(254mm)
5” (127mm)
20-1/16”(509mm)
Slipfits 4”Poleor
Tenon
42”(1067mm)
10”(254mm)
5” (127mm)
20-1/16”(509mm)
ACCESSORY ORDERING INFORMATION (Accessories are field installed)
Description Order Number Description Order Number
LUMINAIRE EPA CHART - XDLMSingle
D180°
D90°
T90°
TN120°
Q90°
1.8
3.1
2.7
4.0
4.0
4.9
FOOTNOTES:1- When ordering a multiple configuration (D180, etc.) order one fixture/bracket configuration per pole - i.e. order one XDLMB 3 LED SS CW UE
BLK CH D180 PCI120 to receive two fixtures and one CH D180 bracket (see drawing on this page). See STEEL ROUND POLES and ALUMINUM ROUND POLES data sheets for pole ordering information.
2- See Lifestyle Bracket ordering chart for Mounting Style/Configurations availability.3- 3" reduced drilling pattern required. 4- For use with SA4 and SA5 mounting styles only.
FK120 Single Fusing (120V) FK1206
FK277 Single Fusing (277V) FK2776
DFK208, 240 Double Fusing (208V, 240V) DFK208, 2406
DFK480 Double Fusing (480V) DFK4806
FK347 Single Fusing (347V) FK3476
Note: Includes Bracket5- DIM and BLS cannot be ordered together. 6- Fusing must be located in the hand hole of pole.
Classic Hook
CHD180 SAD180
SAW
UCLD180
UCLS
Side Arm Universal Pole Clamp
See Lifestyle Brackets and Mounts in outdoor section of latest Buyers Guide for details on other bracket sizes.
T (800) 236-6800 F (262) 504-5415US: www.cree.com/lighting
† See www.cree.com/lighting/products/warranty for warranty terms
Rev. Date: V4 07/22/2015
Cree Edge™ SeriesLED Pathway Luminaire
Ordering InformationExample: PWY-EDG-2M-P0-02-E-UL-SV-350
PWY-EDG 02 E
Product Optic MountingLED Count (x9)
Series Voltage Color Options
Drive Current Options
PWY-EDG 2MType II Medium3MType III Medium5MType V Medium5SType V Short
P013" (330mm) landscapeP118" (457mm) landscapeP336" (914mm) pathwayP442" (1067mm) pathwayP896" (2438mm) pedestrian
02 E ULUniversal120-277VUHUniversal347-480V- Available with P3, P4, and P8 mounts only12120V27277V
BKBlackBZBronzeSVSilver WHWhite
350350mA525525mA- Available with P1, P3, P4, and P8 mounts only
40K 4000K Color Temperature - Minimum 70 CRI - Color temperature per luminaire
F Fuse - When code dictates fusing, use time delay fuse - Refer to ML spec sheet for availability with ML options
HL Hi/Low (Dual Circuit Input) - Refer to HL spec sheet for details - Sensor not included
TL Two-Level (175/525 w/integrated sensor control) - Refer to TL spec sheet for details
TL2 Two-Level (0/350 w/integrated sensor control) - Refer to TL spec sheet for details
TL3 Two-Level (0/525 w/integrated sensor control) - Refer to TL spec sheet for details
WB Welded Base Plate - Standard on P8 mount option, available with P3 and P4 mount - Includes welded base cover
Product DescriptionDurable die-cast aluminum luminaire housing mounts directly to 4" (102mm) diameter pole (included) without visible mounting hardware for clean apperance. Pole mounts to rugged die cast aluminum internal flange secured by three 3/8" - 16x6" anchor bolts with 1-1/4" hook (provided). Note: T45 Torx 3/8" socket required for head installation. Top mounted LEDs for superior optical performance and light control.Applications: Landscape, walk-ways and general site lighting
Accessories
Field-Installed
Upgrade Kit- Used for replacement of existing bollards with a bolt hole circle of 5.75" (146mm)XA-XBP8RSV XA-XBP8RWH XA-XBP8RPBXA-XBP8RBK XA-XBP8RBZ
Patented NanoOptic® Product Technology
Made in the U.S.A. of U.S. and imported parts
CRI: Minimum 70 CRI
CCT: 4000K (+/- 300K), 5700K (+/- 500K) standard
Limited Warranty†: 10 years on luminaire/10 years on Colorfast DeltaGuard® finish
Performance Summary
“A”
10.0"(254mm)
4.0"(102mm)
7.0"(177mm)
Model Dim. "A" Weight*
Landscape (P0) 13" (330mm) 12.7 lbs. (5.8kg)
Landscape (P1) 18" (457mm) 13.3 lbs. (6.0kg)
Pathway (P3) 36" (914mm) 17.9 lbs. (8.1kg)
Pathway (P4) 42" (1068mm) 18.6 lbs. (8.4kg)
Pedestrian (P8) 96" (2438mm) 28.4 lbs (12.9kg)
* Add 4.5 lbs. (2.0kg) for 347-480V
T (800) 236-6800 F (262) 504-5415US: www.cree.com/lighting
Product Specifications
CONSTRUCTION & MATERIALS• Durable die-cast aluminum luminaire housing mounts directly to 4" (102mm) diameter
pole (included) without visible mounting hardware for clean appearance• Pole mounts to rugged die cast aluminum internal flange secured by three
3/8"-16x6" anchor bolts with 1-1/4" hook(provided)• Note: T45 Torx 3/8" socket required for head installation• Top mounted LEDs for superior optical performance and light control • Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an
ultradurable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available
• Weight: See Dimension and Weight Chart on page 1
ELECTRICAL SYSTEM• Input Voltage: 120-277V or 347-480V, 50/60Hz, Class 1 drivers • Power Factor : > 0.9 at full load at 120V• Total Harmonic Distortion: < 20% at full load at 120V• Integral 10kV surge suppression protection standard• To address inrush current, slow blow fuse or type C/D breaker should be used
REGULATORY & VOLUNTARY QUALIFICATIONS• cULus Listed• Suitable for wet locations• 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2• Luminaire and finish endurance tested to withstand 5,000 hours of elevated
ambient salt fog conditions as defined in ASTM Standard B 117• Meets Buy American requirements within ARRA
Recommended Cree Edge™ Series Lumen Maintenance Factors (LMF)1
Ambient InitialLMF
25K hrProjected2
LMF
50K hrProjected2
LMF
75K hrCalculated3
LMF
100K hrCalculated3
LMF
5˚C (41˚F) 1.04 0.99 0.97 0.95 0.93
10˚C(50˚F) 1.03 0.98 0.96 0.94 0.92
15˚C(59˚F) 1.02 0.97 0.95 0.93 0.91
20˚C(68˚F) 1.01 0.96 0.94 0.92 0.90
25˚C(77˚F) 1.00 0.95 0.93 0.91 0.89
1 Lumen maintenance values at 25˚C are calculated per TM-21 based on LM-80 data and in-situ luminaire testing2 In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip)3 In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing ((DUT) i.e. the packaged LED chip)
Electrical Data*
LED Count (x9)
System Watts120-277V
System Watts347-480V
Total Current
120V 208V 240V 277V 347V 480V
350mA
02 22 28 0.18 0.12 0.10 0.10 0.09 0.13
525mA
02 34 40 0.29 0.19 0.17 0.15 0.12 0.13
Cree Edge™ LED Pathway Luminaire
* Electrical data at 25˚C (77˚F)
T (800) 236-6800 F (262) 504-5415US: www.cree.com/lighting
PhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: www.cree.com/Lighting/Tools-and-Support/Exterior-IES-Configuration-Tool
Cree Edge™ LED Pathway Luminaire
* Initial delivered lumens at 25˚C (77˚F)** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: www.ies.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf
2M
RESTL Test Report #: PL5758-001PWY-EDG-2M-**-02-E-UL-350-40KInitial Delivered Lumens: 1,549
283
567
850
1134
60˚
90˚ 90˚
60˚
30˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
120˚120˚
150˚ 150˚
PWY-EDG-2M-**-02-E-UL-350-40KMounting Height: 3' (0.9m) A.F.G.Initial Delivered Lumens: 1,565Initial FC at grade
70˚
Position of vertical planeof maximum candlepower.
0'
0m
0m
1.5
1.5
1.5
1.5 3.0
3.0
3.0
3.0 4.6
4.6
4.6
4.6 6.16.1
6.1
6.1 7.67.6
0'
5'5'
5'
5'
10'10'
10'
10'
15'15'
15'
15'
20'20'20'
21.2.1
20'
25'25'
CURB LINE
.5
Type II Medium Distribution
LED Count (x9)
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
350mA
02 1,565 B1 U0 G1 1,625 B1 U0 G1
525mA
02 2,191 B1 U0 G1 2,276 B1 U0 G1
* Initial delivered lumens at 25˚C (77˚F)** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: www.ies.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf
3M
RESTL Test Report #: PL5698-001PWY-EDG-3M-**-02-E-UL-350-40KInitial Delivered Lumens: 1,470
219
439
658
878
60˚
90˚ 90°
60˚
30˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
120˚120˚
150˚ 150˚
PWY-EDG-3M-**-02-E-UL-350-40KMounting Height: 3' (0.9m) A.F.G.Initial Delivered Lumens: 1,389Initial FC at grade
60˚
Position of vertical planeof maximum candlepower.
0'
0m
0m
1.5
1.5
1.5
1.5 3.0
3.0
3.0
3.0 4.6
4.6
4.6
4.6 6.16.1
6.1
6.1 7.67.6
0'
5'5'
5'
5'
10'10'
10'
10'
15'15'
15'
15'
20'20'20'
21.2
20'
25'25'
CURB LINE
.1.5
Type III Medium Distribution
LED Count (x9)
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
350mA
02 1,389 B1 U0 G1 1,442 B1 U0 G1
525mA
02 1,944 B1 U0 G1 2,019 B1 U0 G1
* Initial delivered lumens at 25˚C (77˚F)** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: www.ies.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf
5M
RESTL Test Report #: PL5798-001PWY-EDG-5M-**-02-E-UL-350-40KInitial Delivered Lumens: 1,780
164
328
492
656
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
90˚ 90˚
60˚60˚
30˚
120˚
150˚ 150˚
120˚
PWY-EDG-5M-**-02-E-UL-350-40KMounting Height: 3' (0.9m) A.F.G.Initial Delivered Lumens: 1,666Initial FC at grade
Position of vertical planeof maximum candlepower.
0'
0m
0m
1.5
1.5
1.5
1.5 3.0
3.0
3.0
3.0 4.6
4.6
4.6
4.6 6.16.1
6.1
6.1 7.67.6
0'
5'5'
5'
5'
10'10'
10'
10'
15'15'
15'
15'
20'20'20'
20'
25'25'
21.2.1
.5CURB LINE
60˚ Type V Medium Distribution
LED Count (x9)
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
350mA
02 1,666 B1 U2 G1 1,730 B1 U2 G1
525mA
02 2,333 B2 U2 G2 2,422 B2 U2 G2
T (800) 236-6800 F (262) 504-5415US: www.cree.com/lighting
© 2015 Cree, Inc. All rights reserved. For informational purposes only. Content is subject to change. Patent www.cree.com/patents. Cree®, NanoOptic®, and Colorfast DeltaGuard® are registered trademarks, and the Cree logo and Cree Edge™ are trademarks of Cree, Inc. The UL logo is a registered trademark of UL LLC.
PhotometryAll published luminaire photometric testing performed to IESNA LM-79-08 standards by a NVLAP accredited laboratory. To obtain an IES file specific to your project consult: www.cree.com/Lighting/Tools-and-Support/Exterior-IES-Configuration-Tool
Cree Edge™ LED Pathway Luminaire
10.0"(254mm)
7.0"(177mm)
"A"
4.0"(102mm)
8.9"(226mm)
Model Dim. "A" Weight*
Pathway (P3) 36" (914mm) 17.9 lbs. (8.1kg)
Pathway (P4) 42" (1068mm) 18.6 lbs. (8.4kg)
Pedestrian (P8) 96" (2438mm) 28.4 lbs (12.9kg)
* Add 4.5 lbs. (2.0kg) for 347-480V
with Welded Base
* Initial delivered lumens at 25˚C (77˚F)** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: www.ies.org/PDF/Erratas/TM-15-11BugRatingsAddendum.pdf
5S
RESTL Test Report #: PL5759-001PWY-EDG-5S-**-02-E-UL-350-40KInitial Delivered Lumens: 1,897
229
459
688
917
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
90˚ 90˚
60˚60˚
30˚
120˚
150˚ 150˚
120˚
PWY-EDG-5S-**-02-E-UL-350-40KMounting Height: 3' (0.9m) A.F.G.Initial Delivered Lumens: 1,868Initial FC at grade
1.2.1.5
Position of vertical planeof maximum candlepower.
0'
0m
0m
1.5
1.5
1.5
1.5 3.0
3.0
3.0
3.0 4.6
4.6
4.6
4.6 6.16.1
6.1
6.1 7.67.6
0'
5'5'
5'
5'
10'10'
10'
10'
15'15'
15'
15'
20'20'20'
20'
25'25'
CURB LINE2
90˚Type V Short Distribution
LED Count (x9)
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
350mA
02 1,868 B1 U2 G1 1,940 B1 U2 G1
525mA
02 2,615 B1 U2 G1 2,716 B1 U2 G1
Rio Rancho, NM 87144Tel: 505-345-0888www.insightlighting.com
11/18/13 Page 1 of 4
EXTERIOR ARCHITECTURAL FACADE LIGHTING
MASQUECERAMIC METAL HALIDE AND AND PULSE START METAL HALIDE
SPECIFICATIONS
OPTICS
LIGHT SOURCES
Narrow Wash (10°)AsymmetricNarrow Spot (10°)
Medium Narrow Wash (20°)Horizontal Offset Wide Spot (20°)
Deep Wallwash (65°-74°) Symmetric Offset
MASQUE 1 MASQUE 2 MASQUE 4
Ceramic Metal Halide Ceramic Metal Halide Ceramic Metal Halide
20W, 39W & 70W 70W & 150W 150W, 210W & 315W
Pulse Start Metal Halide
250W & 400W
ELECTRICAL Input Voltage 120V to 277VAll ballasts are integral to the fixture. All fixtures are tested prior to shipment.
Ceramic Metal Halide ballasts are electronic, high power factor, "A" sound rated and have a THD of less than 10%, available in 120V or 277V. See ordering information for details.
Pulse Start Metal Halide ballasts are HPF core/coil assemblies available in 120V - 347V. See ordering information for details.
PHySICAL Dimensions(Height X Width X Depth)
MASQUE 1 - SM Mounting: 9-5/8" x 5-1/8" X 6-3/4""MASQUE 2 - SM Mounting: 12-3/4" x 5-3/4" X 7-1/8"MASQUE 4 - SM Mounting: 21" x 9-1/2" X 13-1/8"
Weight MASQUE 1 - SM Mounting: 7 lbs (3.17 kg)MASQUE 2 - SM Mounting: 12 lbs (5.44 kg)MASQUE 4 - SM Mounting: 47 lbs (21.32 kg)
Housing Heavy duty die-cast aluminum, powder-coated finish
EPA MASQUE 1 - SM Mounting: 0.551 FT2
MASQUE 2 - SM Mounting: 0.891 FT2
MASQUE 4 - SM Mounting: 2.269 FT2
Lens Tempered glass
CERTIFICATION Certification UL/CUL for Use in Wet Locations
C US
Tel: 505-345-0888www.insightlighting.com
11/18/13 Page 2 of 4
EXTERIOR ARCHITECTURAL FACADE LIGHTING
MASQUECERAMIC METAL HALIDE AND AND PULSE START METAL HALIDE
ORDERING INFORMATION
Prefix(Wattage/LigHt SourCe)
oPtiCS Mounting VoLtage finiSH oPtionS & aCCeSSorieS
MaSQue 1 CeraMiC MetaL HaLide
MQ1-20CMH20W CMH, T4.5, G8.5ANSI156
MQ1-39CMH39W CMH, T4, G8.5ANSI130
MQ1-70CMH70 CMH, T4, T4.5, G8.5ANSI139
MaSQue 1 oPtiCS
nW = Narrow Wash (10°) *
MW = Medium Narrow Wash (20°)
dWW = Deep Wallwash (65°-74°)
aSY = Asymmetric
Ho = Horizontal Offset
So = Symmetric Offset
nS = Narrow Spot (10°) *
WS = Wide Spot (20°)
MaSQue 1
SM = Surface Mount, Wall or Ground
CM = Conduit Mount
ex-x = Extended Arm, X = Arm length
WM2-x = Wall Mount, Twin Fixture Uplight & Downlight X = Arm length
St-x = Stanchion, X = Stanchion height
dB1 = Direct Burial, Single Fixture
dB2 = Direct Burial, Twin Fixture
MaSQue 1
1 = 120V
2 = 277V
tW = Textured White
tBL = Textured Black
tBr = Textured Bronze
tLB = Textured Light Bronze
tn = Textured Natural
tS = Textured Sandstone
Sf = Specify Finish #
CC = Custom Color #
# Contact factory. Additional charges will apply.
faSCiaS
Fascia options are limited by lamp and/or optics. Please contact factory for details
externaL SHieLdS
eCB = Cross Baffle
eaH = Adjustable Horizontal Baffle
eHB = Horizontal Baffle
eaV = Adjustable Vertical Baffle
eVB = Vertical Baffle
Bd = Barn Doors
VS = Cutoff Visor
Wg = Wire Guard
fS = Adjustable Snoot
Sn = Snoot• SN is available with Masque 1 & 2 only. Contact factory for availability with Masque 4
CfS = Color Filter/Snoot• Contact factory for filter color selections.
• CFS is available with Masque 1 & 2 only
oPtionS
tP = Tamper Proof Fasteners
Crf = Corrosion Resistant Finish • CRF is recommended for coastal or extreme exterior environments.
• Contact factory for available finishes.
MaSQue 2 CeraMiC MetaL HaLide
MQ2-70CMH70W CMH, T6, G12ANSI139
MQ2-150CMH150 CMH, T6, G12ANSI142
MaSQue 2 oPtiCS
nW = Narrow Wash (10°) *
MW = Medium Narrow Wash (20°)
dWW = Deep Wallwash (65°-74°)
aSY = Asymmetric
Ho = Horizontal Offset
So = Symmetric Offset
nS = Narrow Spot (10°) *
WS = Wide Spot (20°)
MaSQue 2
SM = Surface Mount, Wall or Ground
CM = Conduit Mount
ex-x = Extended Arm, X = Arm length
WM2-x = Twin Fixture, Wall Mount Uplight & Downlight X = Arm length
St-x = Stanchion, X = Stanchion height
dB1 = Direct Burial, Single Fixture
dB2 = Direct Burial, Twin Fixture
MaSQue 2
1 = 120V
2 = 277V
MaSQue 4CeraMiC MetaL HaLide
MQ4-150CMH150 CMH, T6, G12, ANSI142
MQ4-210CMH210 CMH, T9, ANSI M183
MQ4-315CMH315 CMH. T9, ANSI M182
PuLSe Start MetaL HaLide
MQ4-250MH250 PSMH, ED28, ANSI153
MQ4-400MH400 PSMH (ED28), ANSI155
MaSQue 4 oPtiCS - CMH
nS = Narrow Spot 150W (6°), 210/315W (11°)
nW = Narrow Wash 150W (6°), 210/315W (11°)
dWW = Deep Wall Wash 210W/315W (65-74°)
MaSQue 4 oPtiCS - PSMH
MW = Medium Narrow Wash (25°)
dWW = Deep Wallwash (65°-74°)
Vo = Vertical Offset
Ho = Horizontal Offset
So = Symmetric Offset
WS = Wide Spot (25°)
MaSQue 4
SM = Surface Mount Wall or Ground
CM = Conduit Mount
ex-x = Extended Arm X = Arm length
St-x = Stanchion X = Stanchion height
dB1 = Direct Burial, Single Fixture
MaSQue 4
150W CMH 1 = 120V
2 = 277V
210W - 315WCMH
2 = 277V
250W - 400 PSMH
1 = 120V
2 = 277V
7 = 347V
ORDERING EXAMPLE: MQ1-20CMH / MW / SM / 1 / TW / BD
Prefix(Wattage/LigHt SourCe)
oPtiCS Mounting VoLtage finiSH oPtionS & aCCeSSorieS
externaL SHieLd oPtionS
eaHadjustable
Horizontal BaffleGlare cutoff in the
vertical plane. Field adjustable.
eCBCross Baffle
Shielding in vertical and
horizontal planes.
eHBHorizontal BaffleGlare cutoff in the
vertical plane.
eaVadjustable Vertical
BaffleGlare cutoff in
the horizontal plane.
BdBarn doors
Flexible framing of the beam
pattern.
eVBVertical Baffle45° shielding for low brightness lateral cutoff.
VSCutoff Visor
Shielding for cutoff in front of the
luminaire.
fSadjustable framing
SnootGlare control for precise
beam framing.
SM - SurfaCe (WaLL or ground)
ex-x - extended arM
CM - Conduit Mount
20-1/2″
5″
6″
4-0 RECESSED J-BOX
(BY OTHERS)
168° ADJUSTABLE
95°
E
SPECIFYARM
LENGTH
73°
C
J-BOX (BY OTHERS)
1-1/2″3″
1-1/4″
4-1/2″
1-3/8″
2-1/4″
(4X) CLEARANCE HOLESFOR 1/4-20
MOUNTING FASTENERSBY OTHERS)
Ø2″WIREWAY
MOUNTING DIMENSIONS
B
A
D
ProduCt Configuration diM a diM B diM C diM d diM e diM f
MASQUE 1 All 6" 6-3/4" 5" 5-1/8" 9-5/8" 8-5/8"
MASQUE 2 70W CMH 7-1/4" 7-1/8" 6-7/8" 5-3/4" 12-3/4" 11-1/2"
MASQUE 2 150W CMH 7-1/4" 9" 6-7/8" 7-1/4" 13-3/4" 12-1/8"
MASQUE 4 All 14-7/8" 13-1/8" 12-3/4" 9-1/2" 21" 18-1/8'
ProduCt Configuration diM a diM B diM C diM d diM e
MASQUE I All 6" 6-3/4" 5" 5-1/8" 11"
MASQUE II 70W CMH 7-1/4" 7-1/8" 6-7/8" 5-3/4" 13-7/8"
MASQUE II 150W CMH 7-1/4" 9" 6-7/8" 7-1/4" 14-1/2"
MASQUE IV All 14-7/8" 13-1/8" 12-3/4" 9-1/2" 21-3/4"
Specify arm Length: Masque i: Specify 6", 12", 18" or 24"Masque ii: Specify 8", 12", 18" or 24"Masque iV: Specify 12", 18" or 24"
350° ROTATABLE
A
E
2-1/4″
168° ADJUSTABLE
C
D
7-1/4″
5-1/4″
6″6″(4X) Clearance Holes For 1/4″
Mounting Hardware (By Others)
C
7-1/4″
WET RATED J-BOXBY OTHERS
180° ADJUSTABLE
8-5/8″
A
B
CONDUIT WALL MOUNT
CONDUITGROUND MOUNT
B
2-1/4″
ProduCt Configuration diM a diM B diM C diM d diM e
MASQUE 1 All 6" 7-1/4" 5" 6" 9-5/8"
MASQUE 2 70W CMH 7-1/4" 7-1/4" 6-7/8" 6" 12-3/4"
MASQUE 2 150W CMH 7-1/4" 9" 6-7/8" 5-3/4" 13-3/4"
MASQUE 4 All 14-7/8" 13-3/8" 12-3/4" 9-13/16" 21"
EXTERIOR ARCHITECTURAL FACADE LIGHTING
20-1/2″
5″
6″
4-0 RECESSED J-BOX
(BY OTHERS)
168° ADJUSTABLE
95°
E
SPECIFYARM
LENGTH
73°
C
J-BOX (BY OTHERS)
1-1/2″3″
1-1/4″
4-1/2″
1-3/8″
2-1/4″
(4X) CLEARANCE HOLESFOR 1/4-20
MOUNTING FASTENERSBY OTHERS)
Ø2″WIREWAY
MOUNTING DIMENSIONS
B
A
D
Tel: 505-345-0888www.insightlighting.com
11/18/13 Page 3 of 4
MASQUECERAMIC METAL HALIDE AND AND PULSE START METAL HALIDE
C
D
180° ADJ.
F
SURFACE WALL MOUNT
SURFACEGROUND MOUNT
B
A
350° ROTATABLE
A
B
E
1-1/2″3″
1-1/4″
4-1/2″
1-3/8″
2-1/4″
(4X) CLEARANCE HOLESFOR 1/4-20
MOUNTING FASTENERSBY OTHERS)
Ø2″WIREWAY
MOUNTING DIMENSIONS
168° ADJUSTABLE
C
D J-BOX (BY OTHERS)
J-BOX (BY OTHERS)
C
D
180° ADJ.
F
SURFACE WALL MOUNT
SURFACEGROUND MOUNT
B
A
350° ROTATABLE
A
B
E
1-1/2″3″
1-1/4″
4-1/2″
1-3/8″
2-1/4″
(4X) CLEARANCE HOLESFOR 1/4-20
MOUNTING FASTENERSBY OTHERS)
Ø2″WIREWAY
MOUNTING DIMENSIONS
168° ADJUSTABLE
C
D J-BOX (BY OTHERS)
J-BOX (BY OTHERS)
7-1/2″ Dia.
PCD 6-1/4″ - 6-3/4″
120°
5-1/2″
350° ROTATABLE
AClearance Slots For3/8″ Mounting Hardware(By Others)
7-1/2″
168° ADJUSTABLE
C
B
SPECIFY18″, 24″,30″, 36″
WM2-x - WaLL, tWin fixture, uPLigHt & doWnLigHt
dB - direCt BuriaL, SingLe fixture
A
14″
140°ADJUSTABLE
B
7″
5″
C
320° ROTATABLE
2″ Minimum
AboveGrade
6"
5"
(2X) INTEGRAL ELECTRONIC
BALLASTS
6″
5″
(2X) INTEGRALELECTRONIC
BALLASTS
12-1/4″
12-1/4″
A
C
2-7/8″
BJ-BOX (BY OTHERS)
SPECIFY6″ or 12″
ProduCt diM a diM B diM C
MASQUE I 6" 16-5/8" 5"
MASQUE II 7-1/4" 22" 6-7/8"
ProduCt diM a diM B diM C
MASQUE I 6" 7-1/8" 5"
MASQUE II 7-1/4" 10" 6-7/8"
MASQUE IV 14-7/8" 15-1/4" 12-3/4"
dB2 - direCt BuriaL, tWin fixture
ProduCt diM a diM B diM C
MASQUE I 6" 7-1/8" 5"
MASQUE II 7-1/4" 10" 6-7/8"
MASQUE IV 14-7/8" 15-1/4" 12-3/8"
ProduCt diM a diM B diM C
MASQUE I 15-1/2" 7-1/8" 5"
MASQUE II 16-7/8" 10" 6-7/8"
14″
A C
2″ Minimum
Above Grade
7″
B
5″
St-x - StanCHion
EXTERIOR ARCHITECTURAL FACADE LIGHTING
MASQUECERAMIC METAL HALIDE AND AND PULSE START METAL HALIDE
Tel: 505-345-0888www.insightlighting.com
11/18/13 Page 4 of 4
| 1 |
ES – eSconce®
ARCHITECTURAL AREA LIGHTING16555 East Gale Ave. | City of Industry | CA 91745P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 2.15
TYPE
• Precision die-cast aluminum construction
• Now available with highly efficient LEDs
• Four precise optical systems for use with MH or HPS lamp
• Optional fascia panels
• One-piece memory retentive molded silicone gasket
• Powder coat finish in 13 standard colors with a polymer primer sealer
1. LUMINAIRE 2. LAMP/BALLAST 3. COLOR 4. OPTIONS 5. FASCIA OPTIONS
3. COLOR AWT (Arctic White) BLK (Black) MTB (Matte Black) DGN (Dark Green) DBZ (Dark Bronze) WRZ (Wheathered Bronse) BRM (Metallic Bronze) VBL (Verde Blue)
CRT (Corten) MAL (Matte Aluminum) MDG (Medium Grey) ATG (Antique Green) LGY (Light Grey) RAL/PREMIUM COLOR (Provide RAL) CUSTOM COLOR (Provide color chip for matching)
SPECIFICATIONS
HOUSING The fixture housing is one-piece die cast aluminum. The front door is die cast aluminum, hinged and secured with a self tensioning latch for relamping and internal access. The front glass element is etched, tempered glass. The front lens is internally illuminated when the fixture is energized. The main lens for the reflector is molded tempered glass with a crowned shape to shed water when the fixture is oriented as an uplight. The secondary lens for uplight (or downlight) is a molded, prismatic glass refractor lens to evenly illuminate the wall. The front door is sealed with a one-piece memory retentive, molded silicone gasket. The rear electrical access has a molded silicone plug to completely seal the fixture from insects or dirt emanating from the electrical box or conduit. All internal and external hardware is stainless steel.
OPTICAL ASSEMBLY The reflector module is composed of faceted, semi specular anodized aluminum panels rigidly attached in an aluminum module finished in high reflectance white. The reflector module is easily removed by loosening four screws and lifting it out The ES2, HID uplight + downlight version includes a second reflector assembly attached to the door which directs the light energy to the refractor lens used for the secondary light output. The ES3 compact fluorescent and LED uplight + downlight versions have a second reflector assembly used to direct light through the refractor lens. ES1 when combined with a blank cover panel (SMB) does not emit light above 90° providing full cutoff.
ELECTRICAL The ballast is mounted on a prewired module with a quick disconnect plug and removed by loosening two captive screws. HID ballasts are high power factor, rated for -30°C starting. Sockets are medium base, pulse rated porcelain. Compact fluorescent sockets for a 26, 32 or 42 watt lamp are 4 pin, GX24q-3,4, with an electronic ballast, -18°C starting. The CF ballast and LED driver will accept an input voltage of 120 thru 277 volts.
ES
4. OPTIONS QRS (Restrike controller and T-4 socket for quartz lamp.
Configured to light following resumption of power until HID reaches full brightness. Lamp wattage not to exceed ballast wattage.)
QL (Socket for T-4 mini-can lamp, field wired to a separate circuit. Lamp wattage not to exceed ballast wattage)
SCB (Surface conduit box. 1/2 NPT inlets on each side. Gasketed cover. Comes standard in white)
LDL (Lightly diffused glass lens to conceal the reflector and decrease visual brightness. Primary lens only)
BBU (Battery backup powers a compact fluorescent lamp for up to 90 minutes during a power failure. Output of the 26 watt lamp will be 450 lumens. Output of the 32 watt lamp will be 575 lumens Output of the 42 watt lamp will be 750 lumens. Not available with HID or LED)
347 (120/240/347 volt ballast for HID lamp/ballast except the 50 HPS which is a 120/347 volt ballast. Not available with LED)
GFH (Gel filter holder to add color to the luminous front lens. The holder can be field installed. Filter size is 9.5"/240mm x 1.75"/50mm. A template of the filter size and shape is provided. The filters are not supplied or installed by AAL. Standard gel high temperature filters are available from Lee Filters (Burbank CA), ROSCO (Stanford CT) or others. Use high temperature filters for longer life)
PC12 (120 volt swivel type photocell (specify voltage))
PC27 (208-277 volt swivel type photocell (specify voltage))
5. FASCIA OPTIONS
LUMINOUS ACRYLIC RIBS LAG (Edge lit acrylic grill assembly fits over the front lens. Can be combined with the gel filter holder option (GFH) to add color to the edges of the acrylic ribs)
SMALL CENTER PANEL (Painted the same color as the fixture) SMP(Perforated) SM4(4 squares) SMB(Blank cover)
METAL FINISHES ON FULL PANEL FASCIAS (The stainless steel fascia panels have a #4 brushed finish with horizontal grain direction. The copper fascia panels will patina over time)Full Panel with a Perforated CenterFPP (Painted finish) FPS (Brushed stainless steel) FPC (Natural copper) Full Panel with a 4 Square Center F4P (Painted finish) F4S (Brushed stainless steel) F4C (Natural copper)
Examples on next page
See next page
JOB
TYPE
NOTES
1. LUMINAIRE LED (Driver included, 120 thru 277 volt, Warm white (3000K), Neutral white (4000K), Bright white (5000K))Uplight or down light (36 light emitting diode array, 37 watts) ES3-36LED-WW (Warm white) ES3-36LED-NW (Neutral white) ES3-36LED-BW (Bright white) Uplight and down light (Primary output 36 LEDs, 37 watt, Secondary output 18 LEDs (18 watts), 60% primary - 40% secondary light distribution) ES3-54LED-WWX (Warm white) ES3-54LED-NWX (Neutral white) ES3-54LED-BWX (Bright white)
HID (Ballast not included) Uplight or down light
ES1-2 (Type 2) ES1-3 (Type 3) ES1-4 (Type 4) ES1-W (Column lighter-narrow beam distribution) Uplight and down light (Ballast not included, 90% primary - 10% secondary light distribution)
ES2-2 (Type 2) ES2-3 (Type 3) ES2-4 (Type 4)
COMPACT FLUORESCENT (Ballast included, 120 thru 277 volt , -18°C min start temp, specify wattage) Uplight or down light ES3-CF1 (One 26, 32 or 42 watt, 4 pin lamp) ES3-CF2 (Two 26, 32 or 42 watt, 4 pin lamp) Uplight and down light ES3-CFX (Two 26, 32 or 42 watt, 60% - 40% light distribution)
2. LAMP/BALLASTMETAL HALIDE (120/208/240/277 volt ballast) Medium base, ED-17 lamp 50MH 70MH 100MH G12 base, T-6 ceramic lamp 39MHT6 70MHT6
PULSE START METAL HALIDE (120/208/240/277 volt ballast) Medium base, ED-17 lamp 150PSMH G12 base, T-6 ceramic lamp 150PSMHT6
HIGH PRESSURE SODIUM (120/208/240/277 volt ballast) Medium base, ED-17 lamp 50HPS 70HPS 100HPS 150HPS
All ballasts are factory wired for 277 volts, unless specified. Lamps not included, except LED option.
| 2 |
ES – eSconce®
ARCHITECTURAL AREA LIGHTING16555 East Gale Ave. | City of Industry | CA 91745P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 2.15
TYPE
FINISH Fixture finish consists of a five stage pretreatment regimen with a polymer primer sealer, oven dry off and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.
INSTALLATION To install the fixture, the die cast wall plate is secured to a j-box with 2-3/4" or 3-1/2" screw mounting centers. Quick disconnect wire harness is wired to the power circuit. The fixture is plugged into a quick disconnect and then hooked onto the wall plate. Two captive screws are then tightened to secure the fixture to the wall plate.
CERTIFICATION The fixture is listed with ETL for outdoor, wet location use, in both an up and down orientation, UL1598 and Canadian CSA Std. C22.2 no.250.
WARRANTY / TERMS AND CONDITIONS OF SALE Download: http://www.hubbelllighting.com/resources/warranty/
AAL reserves the right to change product specifications without notice.
ES3 CF2 WATTAGE: 87.6 LUMEN OUTPUT: 3003 EFFICACY: 36.5
UPLIGHT 0.9%DOWNLIGHT 99.1%
ES3 54LED WW WATTAGE: 55 LUMEN OUTPUT: 1826 EFFICACY: 33.2
UPLIGHT 22.2%DOWNLIGHT 77.8%
IES files can be found at www.aal.net
DIMENSION
SMP SM4 SMB Perforated 4 Squares Blank cover
FPP FPS FPC Painted Finish Brushed Stainless Steel Natural Copper
Full Panel with a 4 Square Center
F4P F4S F4C Painted Finish Brushed Stainless Steel Natural Copper
Small Center Panel (painted the same color as the fixture)
Full Panel with a Perforated Center
LAG
Luminous Acrylic Ribs
METAL FINISHES ON FULL PANEL FASCIAS
10.5 in 10.5"/ 267mm
10.9 in 6.12"155mm
14.0 in 14"/ 360mm
square
Glass lens
Caulk between themounting plateand the wall
6.1 in 6.10"
155mm
14"/360mm square
10.5 in 10.5"/ 267mm
10.9 in 6.12"155mm
14.0 in 14"/ 360mm
square
Glass lens
Caulk between themounting plateand the wall
6.1 in 6.10"
155mm
6.12"155mm
10.5"/267mm
10.5 in 10.5"/ 267mm
10.9 in 6.12"155mm
14.0 in 14"/ 360mm
square
Glass lens
Caulk between themounting plateand the wall
6.1 in 6.10"
155mm 6.12"155mm
Caulk between the mounting plate and the wall
WT: 24 lbs
ZONE LUMENS %LAMP %LUMINAIRE
0 - 30 781 12.2% 26.0%
0 - 40 1326 20.7% 44.2%
0 - 60 2422 37.8% 80.7%
60 - 90 553 8.6% 18.4%
0 - 90 2975 46.5% 99.1%
90 - 180 28 0% 0.9%
0 - 180 3003 46.9% 100%
ProjectTypeOrdering #Comments
Ripley CollectionOutdoor Wall 1Lt49060OZ (Olde Bronze)
Product Description:
Bringing clean lines to a rustic look, the Ripley collection of outdoor lightingfeatures an Olde Bronze finish that warms the smooth cone shape of this 1 lightoutdoor sconce. 10 inch width. Height 9.5 inches. Extension 11.5 inches. Rises3 inches above the center of the wall opening. Uses 1 - 40W max (type R) or 1 -60W (G type) bulb. UL listed for wet locations. Dark sky compliant with use ofR14 40W bulb.
Technical InformationLamp Included: Not IncludedWeight: 1LBSExtension: 11.25Voltage: 120Safety Rated: WetHCWO: 3Base Backplate: 5.875" DIADual Mount: NoDark Sky: YesPatent: US Patent PendingNotes: Dark sky compliant with use of R14, 40W bulb.Light Source: IncandescentSocket Base: MediumNumber of Bulbs: 1Lamp Type: R14FLMax Watt: 40WWidth: 10"Height: 9"Overall Height: "Collection: Ripley CollectionFinish: Olde Bronze
2.00(2 PLCS)
1-11.5" NPTIN BOTTOM
(3 PLCS)
22.5°
1.00(2 PLCS)
1-11.5" NPTIN BOTTOM(2 PLCS)
2.00(2 PLCS)
1-11.5" NPTIN BOTTOM(3 PLCS)
LTV81HS
LTV82HS
TOP SIDE
TOP
TOP
SIDE
LTV83HS
SIDE
BOTTOM
BOTTOM
BOTTOM
24°
10"(254 mm)
13" DIA.(332 mm)
4A"(103 mm)
1"(26 mm)
1"(26 mm)
24°9E" DIA.(250 mm)
9E"(250 mm)
3B"(79 mm)
1"(26 mm)
2K"(64 mm)
24°
7I" DIA.(202 mm)
8J"(210 mm)
Pour Box rough-in housing ships separately and as a quick-ship if requested.
LTV81 LTV82 LTV83
DEBRIS SHIELDS
4"(102 mm)
2"(51 mm)
4"(102 mm)
2"(51 mm)
2"(51 mm)
1"(25 mm)
3 NPTPipe Plugs
3 NPTPipe Plugs
2 NPTPipe Plugs
Lightvault® LTV8HS Half Shield
3/5/14 • kl_ltv8hs_spec.pdf
Lens Options. Ordered separately from fixture. See page 3. CAUTION: Options must be installed at factory. Opening component module on site will void warranty.
/ / Lens Ring Distribution Source Color Temp. Voltage
HOUSING: Pour Box rough-in housing for installation below grade. High temperature UV resistant thermal plastic, F” minimum wall, black. Includes a splice box with molded plastic splice cover and silicone gasket. Three 1” NPT in bottom for through wiring on LTV81 and LTV82. Two 1” NPT in bottom for through wiring on LTV83. 107 cu. in. splice area for LTV81. 52 cu. in. splice area for LTV82. 24 cu. in. splice area for LTV83. Housing supplied with protective aluminum debris shield mask with orientation label for proper installation alignment for clean and easy installation in concrete pad or soil. Ships separately and as a quick-ship if requested.COMPONENT MODULE: One-piece impregnated cast bronze, fully sealed component module secured to the face trims from the underside. A high temperature, IP67 sealed cable extends from the component module to the splice box inside the housing. The fully assembled component module is secured to the housing with (4) ¼-20 tamper-resistant high grade stainless steel fasteners.FACE TRIM: One-piece cast bronze lens ring fastened to the component module from the underside shall provide glare control from the back side along walkways and paths. OPTICAL MODULES: Spot (SP), Narrow Flood (NF), and Wall Wash (WW) optical modules are adjustable up to 15° utilizing a Bluetooth enabled motor assembly.BLUETOOTH: Integral Bluetooth module used to adjust optics and dim fixture to desired setting when paired with KIM LTV8 Remote App via cellular/tablet device. Fully qualified Bluetooth 1.1, 1.2, 2.0, 2.1. Bluetooth v2.0+EDR compatible with Android devices running Android Gingerbread API level 9 forward. Bluetooth 4.0 LE compatible with iOS devices - iPhone 4S and later, 5th generation iPod touch, the iPad Mini and the 3rd generation and later of the full size iPad with iOS 5 or later. Bluetooth Apps are available for Apple iOS and Google Android mobile devices and are downloadable via the internet at Apple App Store or Google Play.LENS: Clear M” thick tempered glass lens and silicone gasket is retained securely within the component module. OPTIONS: Hex Cell Louver (HL), Prismatic Lens (PL), Rebar Cage Anchor (RCA8x). See page 3 for details. ELECTRICAL EQUIPMENT: All electronic components are UL and CSA recognized and mounted directly to the component module for maximum heat dissipation and modularity. Driver is IP67 with -30°C minimum temperature rating.CERTIFICATION: (UL1598, UL8750).U.S. Patents Pending.
Ordering Example: LTV81HS/SP/36L5KUV/HL/RCA81
Date:Page: 1 of 3
Type:Job: Fixture Catalog number:
Approvals:Optional Features:
Specifications
Spot (SP) Wall Wash (WW)Narrow Flood (NF)
LIGHT DISTRIBUTIONS: LTV81HS, LTV82HS, LTV83HS
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kim Lighting is under license. Other trademarks and trade names are those of their respective owners. Apple, the Apple logo, iPad, iPhone, and iPod Touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
© 2014 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
Lens RingOptical Module Source
Color Temperature Voltage
Total System Watts
Absolute Lumens
Center Beam Candle Power*
Beam Angle* Max. Amps
� LTV81HS � SP � 36L � 3K� 4K� 5K
UV 44W 244730673356
294693677341827
12° .367 for 120V.212 for 208V.183 for 240V.159 for 277V
� LTV81HS � NF � 36L � 3K� 4K� 5K
UV 44W 216427182737
242230223048
54° .367 for 120V.212 for 208V.183 for 240V.159 for 277V
� LTV81HS � WW � 36L � 3K� 4K� 5K
UV 44W 257232063523
418852205736
60° .367 for 120V.212 for 208V.183 for 240V.159 for 277V
� LTV82HS � SP � 18L � 3K� 4K� 5K
UV 23W 129716471722
167872028222899
12° .192 for 120V.111 for 208V.096 for 240V.083 for 277V
� LTV82HS � NF � 18L � 3K� 4K� 5K
UV 23W 104614061465
127216871758
52° .192 for 120V.111 for 208V.096 for 240V.083 for 277V
� LTV82HS � WW � 16L � 3K� 4K� 5K
UV 20W 108113851544
233629923336
58° .167 for 120V.091 for 208V.079 for 240V.069 for 277V
� LTV83HS � SP � 12L � 3K� 4K� 5K
UV 14W 83310081096
107501300814144
12° .117 for 120V.067 for 208V.058 for 240V.051 for 277V
� LTV83HS � NF � 12L � 3K� 4K� 5K
UV 14W 706885929
86310821136
52°
� LTV83HS � WW � 12L � 3K� 4K� 5K
UV 14W 80410311149
166421342378
60°
Lightvault® LTV8HS Half Shield
3/5/14 • kl_ltv8hs_spec.pdf
Page: 2 of 3Type:
Job:
Standard Features
Spectroradiometric
3K 4K 5K
Correlated Color Temp. CCT (K) 2800K to 3175K 3800K to 4600K 4600K to 5600K
Color Rendering Index (CRI)
Power Factor >.90 >.90 >.90
COMPONENT MODULE:
KEY: HS = Half Shield, SP = Spot, NF = Narrow Flood, WW = Wall Wash (PicoPrism™), 36L = 36 LEDs, 18L = 18 LEDs, 16L = 16 LEDs, 12L = 12 LEDs, 3K = 2800K to 3175K, 4K = 3800K to 4600K, 5K = 4600K to 5600K, UV = Universal Voltage shall range from 120V-277V with a ±10% tolerance.* The SP and NF is based on the candela exiting straight up. The WW is for highest candela angle.
L70 Data
Calculated Reported*
350 mA 100,000 60,000
*Based on test duration.
© 2014 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
Lightvault® LTV8HS Half Shield
3/5/14 • kl_ltv8hs_spec.pdf
Hex Cell Louver (HL): Aluminum hex-cell louver inserted behind the lens. Works best with spot optics. (SP or NF only).
Cat. No.� HL Hex Cell Louver
CAUTION: All lens options are integral parts of Component Module and must be installed at factory. Opening of Component Module on site will void warranty.
Prismatic Lens (PL): Glass Prismatic Lens inserted behind the lens. Works best with spot optics. (SP or NF only).
Cat. No.� PL Prismatic Lens
Lens OptionsCat. No. (See right) � No Option
Optional Features
Page: 3 of 3Type:
Job:
19"(483 mm)
13L"(349 mm)
RCA81
16M"(414 mm)
6C"(162 mm)
6C"(162 mm)
5C"(137 mm)
11O"(301 mm)
RCA82
14K"(368 mm)
RCA83
10K"(267 mm)
Rebar cage anchor for fixture support during concrete pour. Rebar supports fixture when tied into paving rebar.
Cat. No.� RCA81 for LTV81� RCA82 for LTV82� RCA83 for LTV83
Rebar Cage AnchorCat. No. (See right) � No Option
Not recommended for Wall Wash distribution.
Not recommended for Wall Wash distribution.
STANDARD LIGHTVAULT® LTV8 LIMITED MANUFACTURER’S WARRANTY: When properly installed and under normal conditions of use, Kim Lighting warrants LIGHTVAULT LTV8 products (“Product(s)”) sold by Kim Lighting to be free from defects in material and workmanship for (i) a period of twenty-five (25) years for brass parts, (ii) a period of seven (7) years for pour boxes, (iii) a period of six (6) years for LED Light Engines and, (iv) a period of five (5) years for LED power components, from the date of sale of such goods to the buyer as specified in Kim Lighting shipment documents for each Product(s). Occupancy sensors, LED drivers, dimmers and relay wiring components are covered by the manufacturer’s warranty. The buyer agrees to make all claims regarding defects or deficiencies in the Product(s) according to the terms of Kim Lighting’s official warranty. Warranty claims must be made in writing according to Kim Lighting procedures existing at the time of the claim. Valid warranty claims must be made within the warranty period specified herein above, and submitted within thirty (30) days of discovery of the damage or defect. No FIELD labor, repair, DISMANTLE, or installation charges are included with this warranty. Kim Lighting may repair or replace any Product(s) covered by this warranty at its sole discretion and in accordance with its procedure. Any unauthorized return, repair, replacement or modification of the Product(s) shall void this warranty. This warranty applies only to the use of the Product(s) as intended by Kim Lighting and does not cover any misapplication or misuse of said Product(s), or installation in hazardous or corrosive environments. In no event shall Kim Lighting’s total liability for any reason arising hereunder exceed the purchase price paid to Kim Lighting for the product purchased by the buyer hereunder. Contact Kim Lighting for complete warranty language, exceptions, and limitations.
© 2014 KIM LIGHTING • 16555 EAST GALE AVENUE, CITY OF INDUSTRY, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716