1
© BlackJack 2014 BlackJack™ Woodworking Tools, Embro, Ontario, Canada N0J 1J0 www.BlackJackCompany.com Plastic for Jigs and Fixtures BJ041422 HDPE: High Density Polyethylene is used in woodworking jigs and sacrificial fences because of it’s low friction qualities and ease of machining. Many router jigs are made using HDPE because it’s safe to cut with a router bit. HDPE machines easily with woodworking cutters. Heat generated when cutting is your enemy so a continuous smooth feed through is highly recom- mended. When drilling, clamp HDPE down to the machine table to prevent it from climbing the drill bit. Be prepared to hold/pull back on the drill. White HDPE SPECIFICATIONS Part # Size UPC Min Qty Case Qty 18301 1/4 x 4 x 36 885732183012 1 1 18306 3/8 x 4 x 36 885732183067 1 1 18311 1/2 x 4 x 36 885732183111 1 1 18316 3/4 x 4 x 36 885732183166 1 1 18302 1/4 x 12 x 36 885732183029 1 1 18307 3/8 x 12 x 36 885732183074 1 1 18312 1/2 x 12 x 36 885732183128 1 1 18317 3/4 x 12 x 36 885732183173 1 1 Light weight PVC: Flexible Polyvinyl Chloride is easy to machine, light weight & tough enough to take the abuse of running a router bearing against it so it’s perfect for router templates. It cuts easily with any woodworking tool and can be shaped with metal files and sand papers. Much better than regular plywood. 4’ x 36” HDPE 12” x 36” HDPE White FPVC SPECIFICATIONS Part # Size UPC Min Qty Case Qty 18320 6 mm x 16 x 16 885732183203 1 1 18321 6 mm x 16 x 32 885732183210 1 1 Note: Length and width dimensions are nominal. Actual product will be reduced by saw kerf width. 6mm FPVC

BJ041422 Plastic for Jigs and Fixtures - Workshop …€¦ · Plastic for Jigs and Fixtures ... High Density Polyethylene is used in woodworking jigs and sacrificial fences because

Embed Size (px)

Citation preview

Page 1: BJ041422 Plastic for Jigs and Fixtures - Workshop …€¦ · Plastic for Jigs and Fixtures ... High Density Polyethylene is used in woodworking jigs and sacrificial fences because

© BlackJack 2014

BlackJack™ Woodworking Tools, Embro, Ontario, Canada N0J 1J0 www.BlackJackCompany.com

Plastic for Jigs and Fixtures

BJ041422

HDPE: High Density Polyethylene is used in woodworking jigs and sacrificial fences because of it’s low friction qualities and ease of machining.

Many router jigs are made using HDPE because it’s safe to cut with a router bit.

HDPE machines easily with woodworking cutters. Heat generated when cutting is your enemy so a continuous smooth feed through is highly recom-mended. When drilling, clamp HDPE down to the machine table to prevent it from climbing the drill bit. Be prepared to hold/pull back on the drill.

White HDPE SPECIFICATIONS

Part # Size UPC Min Qty

Case Qty

18301 1/4 x 4 x 36 885732183012 1 118306 3/8 x 4 x 36 885732183067 1 118311 1/2 x 4 x 36 885732183111 1 118316 3/4 x 4 x 36 885732183166 1 118302 1/4 x 12 x 36 885732183029 1 118307 3/8 x 12 x 36 885732183074 1 118312 1/2 x 12 x 36 885732183128 1 118317 3/4 x 12 x 36 885732183173 1 1

Light weight PVC: Flexible Polyvinyl Chloride is easy to machine, light weight & tough enough to take the abuse of running a router bearing against it so it’s perfect for router templates. It cuts easily withany woodworking tool and can be shaped with metalfiles and sand papers.

Much better than regular plywood.

4’ x 36”HDPE

12” x 36”HDPE

White FPVC SPECIFICATIONS

Part # Size UPC Min Qty

Case Qty

18320 6 mm x 16 x 16 885732183203 1 118321 6 mm x 16 x 32 885732183210 1 1

Note: Length and width dimensions are nominal. Actual product will be reduced by saw kerf width.

6mmFPVC