Embed Size (px)
Citation preview
Bizagi BPM SuiteUser Guide
2Copyright copy 2002-2016 Bizagi All rights reserved 2
Table of Contents
Part I Configuring and using theMailChimp connector 3
PartIConfiguring and using theMailChimp connector
4Copyright copy 2002-2016 Bizagi All rights reserved
Configuring and using the MailChimp connector
OverviewThe MailChimp connector for Bizagi is available for download at Bizagi Connectors Xchange
Through this connector you will be able to connect your Bizagi processes to a wwwmailchimpcom
account in order to use OOOOO services API
For more information about this connectors capabilities visit Bizagi Connectors Xchange
Before you startIn order to test and use this connector you will need
1 Bizagi Studio previously installed
2 This connector previously installed via the Connectors Xchange as described at http
helpbizagicombpmsuiteenindexhtmlConnectors_Xchangehtm or through a manual installation
as described at httphelpbizagicombpmsuiteenindexhtmlConnectors_installhtm
3 An account at wwwmailchimpcom and a registered app
Configuring the connectorIn order to configure the connector (ie its authentication parameters) follow the steps presented at the
Configuration chapter in httphelpbizagicombpmsuiteenindexhtmlConnectors_installhtm
For this configuration consider the following authentication parameters
middot Authentication method Basic
middot Username The username of your MailChimp account
middot Password In here you do not need the actual password but inputting the API Key instead (as
requested and managed at https[server_name]adminmailchimpcomaccountapi)
5Copyright copy 2002-2016 Bizagi All rights reserved
Notice that when logged in to MailChimp you are re-directed to a specific server attending your
account
This means that you will always access an URL like this https[server_name]adminmailchimpcom
6Copyright copy 2002-2016 Bizagi All rights reserved
while having [server_name] possibly vary for each account
Using the connectorThis connector features an available method of MailChimp services which allows you to subscribe a
new contact to any mailing list you have at MailChimp
To learn overall howwhere to configure the use of a connector refer to httphelpbizagicom
bpmsuiteenindexhtmlConnectors_Studiohtm
When using the connector ensure you consider the following details for the available method
Subscribe contact to mailing listEnter basic contact information to send it as subscribed into the list you specify
To configure its inputs consider
middot Email_address The e-mail address of that new contact
middot Status Use a constant definition that specifies subscribed
middot FNAME The first name of that new contact
middot LNAME The last name of that new contact
middot data_center The server_name which is attending your MailChimp account Verified from a browser
as https[server_name]adminmailchimpcom
middot list_id The unique id of the mailing list (string-type) Verified from a browser as https
[server_name]adminmailchimpcomlistssettingsid=[list_integer_id]
7Copyright copy 2002-2016 Bizagi All rights reserved
To configure its outputs when getting started and testing you may map the response Id from output
8Copyright copy 2002-2016 Bizagi All rights reserved
Once you subscribe a new contact consider that MailChimp services will most likely not synchronize
this information immediately
It may take up a few minutes for you to be able to see this change reflected while accessing from a
browser
For more information about this methods use refer to MailChimps official documentation at https
apidocsmailchimpcom
2Copyright copy 2002-2016 Bizagi All rights reserved 2
Table of Contents
Part I Configuring and using theMailChimp connector 3
PartIConfiguring and using theMailChimp connector
4Copyright copy 2002-2016 Bizagi All rights reserved
Configuring and using the MailChimp connector
OverviewThe MailChimp connector for Bizagi is available for download at Bizagi Connectors Xchange
Through this connector you will be able to connect your Bizagi processes to a wwwmailchimpcom
account in order to use OOOOO services API
For more information about this connectors capabilities visit Bizagi Connectors Xchange
Before you startIn order to test and use this connector you will need
1 Bizagi Studio previously installed
2 This connector previously installed via the Connectors Xchange as described at http
helpbizagicombpmsuiteenindexhtmlConnectors_Xchangehtm or through a manual installation
as described at httphelpbizagicombpmsuiteenindexhtmlConnectors_installhtm
3 An account at wwwmailchimpcom and a registered app
Configuring the connectorIn order to configure the connector (ie its authentication parameters) follow the steps presented at the
Configuration chapter in httphelpbizagicombpmsuiteenindexhtmlConnectors_installhtm
For this configuration consider the following authentication parameters
middot Authentication method Basic
middot Username The username of your MailChimp account
middot Password In here you do not need the actual password but inputting the API Key instead (as
requested and managed at https[server_name]adminmailchimpcomaccountapi)
5Copyright copy 2002-2016 Bizagi All rights reserved
Notice that when logged in to MailChimp you are re-directed to a specific server attending your
account
This means that you will always access an URL like this https[server_name]adminmailchimpcom
6Copyright copy 2002-2016 Bizagi All rights reserved
while having [server_name] possibly vary for each account
Using the connectorThis connector features an available method of MailChimp services which allows you to subscribe a
new contact to any mailing list you have at MailChimp
To learn overall howwhere to configure the use of a connector refer to httphelpbizagicom
bpmsuiteenindexhtmlConnectors_Studiohtm
When using the connector ensure you consider the following details for the available method
Subscribe contact to mailing listEnter basic contact information to send it as subscribed into the list you specify
To configure its inputs consider
middot Email_address The e-mail address of that new contact
middot Status Use a constant definition that specifies subscribed
middot FNAME The first name of that new contact
middot LNAME The last name of that new contact
middot data_center The server_name which is attending your MailChimp account Verified from a browser
as https[server_name]adminmailchimpcom
middot list_id The unique id of the mailing list (string-type) Verified from a browser as https
[server_name]adminmailchimpcomlistssettingsid=[list_integer_id]
7Copyright copy 2002-2016 Bizagi All rights reserved
To configure its outputs when getting started and testing you may map the response Id from output
8Copyright copy 2002-2016 Bizagi All rights reserved
Once you subscribe a new contact consider that MailChimp services will most likely not synchronize
this information immediately
It may take up a few minutes for you to be able to see this change reflected while accessing from a
browser
For more information about this methods use refer to MailChimps official documentation at https
apidocsmailchimpcom
PartIConfiguring and using theMailChimp connector
4Copyright copy 2002-2016 Bizagi All rights reserved
Configuring and using the MailChimp connector
OverviewThe MailChimp connector for Bizagi is available for download at Bizagi Connectors Xchange
Through this connector you will be able to connect your Bizagi processes to a wwwmailchimpcom
account in order to use OOOOO services API
For more information about this connectors capabilities visit Bizagi Connectors Xchange
Before you startIn order to test and use this connector you will need
1 Bizagi Studio previously installed
2 This connector previously installed via the Connectors Xchange as described at http
helpbizagicombpmsuiteenindexhtmlConnectors_Xchangehtm or through a manual installation
as described at httphelpbizagicombpmsuiteenindexhtmlConnectors_installhtm
3 An account at wwwmailchimpcom and a registered app
Configuring the connectorIn order to configure the connector (ie its authentication parameters) follow the steps presented at the
Configuration chapter in httphelpbizagicombpmsuiteenindexhtmlConnectors_installhtm
For this configuration consider the following authentication parameters
middot Authentication method Basic
middot Username The username of your MailChimp account
middot Password In here you do not need the actual password but inputting the API Key instead (as
requested and managed at https[server_name]adminmailchimpcomaccountapi)
5Copyright copy 2002-2016 Bizagi All rights reserved
Notice that when logged in to MailChimp you are re-directed to a specific server attending your
account
This means that you will always access an URL like this https[server_name]adminmailchimpcom
6Copyright copy 2002-2016 Bizagi All rights reserved
while having [server_name] possibly vary for each account
Using the connectorThis connector features an available method of MailChimp services which allows you to subscribe a
new contact to any mailing list you have at MailChimp
To learn overall howwhere to configure the use of a connector refer to httphelpbizagicom
bpmsuiteenindexhtmlConnectors_Studiohtm
When using the connector ensure you consider the following details for the available method
Subscribe contact to mailing listEnter basic contact information to send it as subscribed into the list you specify
To configure its inputs consider
middot Email_address The e-mail address of that new contact
middot Status Use a constant definition that specifies subscribed
middot FNAME The first name of that new contact
middot LNAME The last name of that new contact
middot data_center The server_name which is attending your MailChimp account Verified from a browser
as https[server_name]adminmailchimpcom
middot list_id The unique id of the mailing list (string-type) Verified from a browser as https
[server_name]adminmailchimpcomlistssettingsid=[list_integer_id]
7Copyright copy 2002-2016 Bizagi All rights reserved
To configure its outputs when getting started and testing you may map the response Id from output
8Copyright copy 2002-2016 Bizagi All rights reserved
Once you subscribe a new contact consider that MailChimp services will most likely not synchronize
this information immediately
It may take up a few minutes for you to be able to see this change reflected while accessing from a
browser
For more information about this methods use refer to MailChimps official documentation at https
apidocsmailchimpcom
4Copyright copy 2002-2016 Bizagi All rights reserved
Configuring and using the MailChimp connector
OverviewThe MailChimp connector for Bizagi is available for download at Bizagi Connectors Xchange
Through this connector you will be able to connect your Bizagi processes to a wwwmailchimpcom
account in order to use OOOOO services API
For more information about this connectors capabilities visit Bizagi Connectors Xchange
Before you startIn order to test and use this connector you will need
1 Bizagi Studio previously installed
2 This connector previously installed via the Connectors Xchange as described at http
helpbizagicombpmsuiteenindexhtmlConnectors_Xchangehtm or through a manual installation
as described at httphelpbizagicombpmsuiteenindexhtmlConnectors_installhtm
3 An account at wwwmailchimpcom and a registered app
Configuring the connectorIn order to configure the connector (ie its authentication parameters) follow the steps presented at the
Configuration chapter in httphelpbizagicombpmsuiteenindexhtmlConnectors_installhtm
For this configuration consider the following authentication parameters
middot Authentication method Basic
middot Username The username of your MailChimp account
middot Password In here you do not need the actual password but inputting the API Key instead (as
requested and managed at https[server_name]adminmailchimpcomaccountapi)
5Copyright copy 2002-2016 Bizagi All rights reserved
Notice that when logged in to MailChimp you are re-directed to a specific server attending your
account
This means that you will always access an URL like this https[server_name]adminmailchimpcom
6Copyright copy 2002-2016 Bizagi All rights reserved
while having [server_name] possibly vary for each account
Using the connectorThis connector features an available method of MailChimp services which allows you to subscribe a
new contact to any mailing list you have at MailChimp
To learn overall howwhere to configure the use of a connector refer to httphelpbizagicom
bpmsuiteenindexhtmlConnectors_Studiohtm
When using the connector ensure you consider the following details for the available method
Subscribe contact to mailing listEnter basic contact information to send it as subscribed into the list you specify
To configure its inputs consider
middot Email_address The e-mail address of that new contact
middot Status Use a constant definition that specifies subscribed
middot FNAME The first name of that new contact
middot LNAME The last name of that new contact
middot data_center The server_name which is attending your MailChimp account Verified from a browser
as https[server_name]adminmailchimpcom
middot list_id The unique id of the mailing list (string-type) Verified from a browser as https
[server_name]adminmailchimpcomlistssettingsid=[list_integer_id]
7Copyright copy 2002-2016 Bizagi All rights reserved
To configure its outputs when getting started and testing you may map the response Id from output
8Copyright copy 2002-2016 Bizagi All rights reserved
Once you subscribe a new contact consider that MailChimp services will most likely not synchronize
this information immediately
It may take up a few minutes for you to be able to see this change reflected while accessing from a
browser
For more information about this methods use refer to MailChimps official documentation at https
apidocsmailchimpcom
5Copyright copy 2002-2016 Bizagi All rights reserved
Notice that when logged in to MailChimp you are re-directed to a specific server attending your
account
This means that you will always access an URL like this https[server_name]adminmailchimpcom
6Copyright copy 2002-2016 Bizagi All rights reserved
while having [server_name] possibly vary for each account
Using the connectorThis connector features an available method of MailChimp services which allows you to subscribe a
new contact to any mailing list you have at MailChimp
To learn overall howwhere to configure the use of a connector refer to httphelpbizagicom
bpmsuiteenindexhtmlConnectors_Studiohtm
When using the connector ensure you consider the following details for the available method
Subscribe contact to mailing listEnter basic contact information to send it as subscribed into the list you specify
To configure its inputs consider
middot Email_address The e-mail address of that new contact
middot Status Use a constant definition that specifies subscribed
middot FNAME The first name of that new contact
middot LNAME The last name of that new contact
middot data_center The server_name which is attending your MailChimp account Verified from a browser
as https[server_name]adminmailchimpcom
middot list_id The unique id of the mailing list (string-type) Verified from a browser as https
[server_name]adminmailchimpcomlistssettingsid=[list_integer_id]
7Copyright copy 2002-2016 Bizagi All rights reserved
To configure its outputs when getting started and testing you may map the response Id from output
8Copyright copy 2002-2016 Bizagi All rights reserved
Once you subscribe a new contact consider that MailChimp services will most likely not synchronize
this information immediately
It may take up a few minutes for you to be able to see this change reflected while accessing from a
browser
For more information about this methods use refer to MailChimps official documentation at https
apidocsmailchimpcom
6Copyright copy 2002-2016 Bizagi All rights reserved
while having [server_name] possibly vary for each account
Using the connectorThis connector features an available method of MailChimp services which allows you to subscribe a
new contact to any mailing list you have at MailChimp
To learn overall howwhere to configure the use of a connector refer to httphelpbizagicom
bpmsuiteenindexhtmlConnectors_Studiohtm
When using the connector ensure you consider the following details for the available method
Subscribe contact to mailing listEnter basic contact information to send it as subscribed into the list you specify
To configure its inputs consider
middot Email_address The e-mail address of that new contact
middot Status Use a constant definition that specifies subscribed
middot FNAME The first name of that new contact
middot LNAME The last name of that new contact
middot data_center The server_name which is attending your MailChimp account Verified from a browser
as https[server_name]adminmailchimpcom
middot list_id The unique id of the mailing list (string-type) Verified from a browser as https
[server_name]adminmailchimpcomlistssettingsid=[list_integer_id]
7Copyright copy 2002-2016 Bizagi All rights reserved
To configure its outputs when getting started and testing you may map the response Id from output
8Copyright copy 2002-2016 Bizagi All rights reserved
Once you subscribe a new contact consider that MailChimp services will most likely not synchronize
this information immediately
It may take up a few minutes for you to be able to see this change reflected while accessing from a
browser
For more information about this methods use refer to MailChimps official documentation at https
apidocsmailchimpcom
7Copyright copy 2002-2016 Bizagi All rights reserved
To configure its outputs when getting started and testing you may map the response Id from output
8Copyright copy 2002-2016 Bizagi All rights reserved
Once you subscribe a new contact consider that MailChimp services will most likely not synchronize
this information immediately
It may take up a few minutes for you to be able to see this change reflected while accessing from a
browser
For more information about this methods use refer to MailChimps official documentation at https
apidocsmailchimpcom
8Copyright copy 2002-2016 Bizagi All rights reserved
Once you subscribe a new contact consider that MailChimp services will most likely not synchronize
this information immediately
It may take up a few minutes for you to be able to see this change reflected while accessing from a
browser
For more information about this methods use refer to MailChimps official documentation at https
apidocsmailchimpcom
