BIOTECH DENTAL GROUP, 2.0 DENTAL OFFICE PARTNER. · BIOTECH DENTAL GROUP, 2.0 DENTAL OFFICE PARTNER. ... Allow practitioners to offer the best products at the best prices for their

PROTHÈSEPROSTHETICS

S

2

BIOTECH DENTAL GROUP, 2.0 DENTAL OFFICE PARTNER.

Since its creation in 1987, Biotech Dental is committed to developing a strong relationship of trust withdentists and dental technicians.

Together, we design and develop ever more tailored product lines to the challenges of the future. Our positionis located at the crossroads of their expectations, innovation and technology.Allow practitioners to offer the best products at the best prices for their patients: that is the first objective ofBiotech Dental.

With more than a million dental implants sold, we have helped to improve the lives of thousands of patientsworldwide through all dentists who have trusted us. With our expertise and our know-how, we have chosento be pioneers of this development through innovative technologies.In recent years, we have integrated new skills, invested over 10 % of our turnover in research and developmentto be able to develop and propose solutions on the cutting edge innovation.

Today we are a key partner for practitioners of dentistry. We offer our customers a wide range of products andservices around dental care, to enable them to meet the different needs of their patients.Innovation and Technology for practitioners to make affordable excellence to patients: this is Ethical currencyof DENTAL BIOTECH.

As many products and services serving the dental office 2.0.

Philippe VERANPresident

3

TABLE OF CONTENTS Biotech Dental .................................................................................... p.02

Table of contents ................................................................................. p.03

Presentation ....................................................................................... p.04

Kontact® implant specifications .......................................................... p.06

Kontact S® implant specifications ....................................................... p.07

Six-Three System® connection ........................................................... p.08

Tooth-emergence adequacy table ...................................................... p.10

Healing screws .................................................................................. p.11

Prosthetic kit ...................................................................................... p.12

Impression transfers & implant analog .................................................. p.13

Straight standard abutments indexed & non-indexed .......................... p.15

Angulated standard abutments indexed & non-indexed ..................... p.16

Cera-Post abutments .......................................................................... p.18

Overcasted abutments & temporary abutments ................................ p.19

Fit-Post abutments ............................................................................. p.20

Nano-Post abutments ........................................................................ p.21

Ø 3 mm impressions transfers & implant analog .................................... p.23

Ø 3 mm healing screws & temporary abutments ................................... p.24

4-Load System ................................................................................. p.26

Ø 4 mm narrow straight & angulated conical abutments ...................... p.27

Ø 4.9 mm straight conical abutments ................................................ p.28

Ø 4.9 mm angulated conical abutments indexed & non-indexed .......... p.29

Kits for conical abutments & Bending lever kit .................................... p.30

Ball abutments & Iso-Post abutments .................................................. p.32

Iso-Post ............................................................................................ p.33

Iso-Post Try-In abutments .................................................................. p.34

Locator® system ................................................................................ p.35

Straight & angulated standard Try-in abutments ................................. p.36

Ø 3 mm straight & angulated Try-in abutments ............................ p.37

Straight & angulated Nano-Post Try-in abutments ........................... p.38

Conical Try-In abutments .................................................................... p.39

Locator® Try-In abutments ................................................................... p.40

Others equipments ............................................................................... p.41

CAD CAM abutments ...................................................................... p.43

Notes .................................................................................................. p.46

General information .......................................................................... p.47

Description

Kits

Cement-retainedprosthetics

Impression transfer

3 mm diameter

Screw-retainedprosthetics

Prostheticsstabilisation

CAD CAM

4

KONTACT® & KONTACT S® IMPLANT

SPHERICALNON-TRAUMATICAPEX

MORSE-TAPER LOCKING SYSTEM

EXCELLENT PRIMARY STABILITY

5

MORSE-TAPER LOCKING SYSTEM

PLATFORM SWITCHING

STSYSTEM® INDEXING

Same surgery and prosthetic kits for Kontact® & Kontact S®

- Easy insertion- Fast and reliable repositioning- Same prosthetics parts for Kontact® & Kontact S®

Chamfered shoulder and micro-structured surface retaining the blood clot and helping bone reconstruction

6

Lengths (in mm)

6 8 10 12 14 16

Ø 3 mm

Ø 3.6 mm

Ø 4.2 mm

Ø 4.8 mm

Ø 5.4 mm

KONTACT® IMPLANT SPECIFICATIONS

For implants common indexation Ø 3.6 mm - Ø 4.2 mm - Ø 4.8 mm - Ø 5.4 mm

Unique implant analog and starred indexing

STSystem ® Indexation

Ø 3 mm implants are designed for

limited spaces in the incisivecanine

sector. They are not suitable

for the canine, premolar and

molar sectors. All of the related

prosthetic items are yellow.

7

KONTACT S® IMPLANT SPECIFICATIONS

Lengths (in mm)

6 8 10 12 14 16

Ø 3 mmAvailable in June

2017

Ø 3.6 mm

Ø 4.2 mm

Ø 4.8 mm

Ø 5.4 mm

For implants common indexation Ø 3.6 mm - Ø 4.2 mm - Ø 4.8 mm - Ø 5.4 mm


Indexation STSystem ®

For implants common indexationØ 3.6 mm - Ø 4.2 mm - Ø 4.8 mm - Ø 5.4 mm


Ø 3 mm implants are designed for

limited spaces in the incisivecanine

sector. They are not suitable for the

canine, premolar and molar sectors.

All of the related prosthetic items

are yellow.

NEW

8

SIX-THREE SYSTEM® CONNECTION

All of our prosthetic components

are laser engraved based on

their sizes.

Abutments exist in indexed and non-indexed version.

Mirror finish

Same connection for Kontact ® & Kontact S ®

Resistant assembly

Total thermal insulation

Easy to insert

Fast & reliable to reposition

9

SIX-THREE SYSTEM® CONNECTION

The Kontact® implant provides excellent tissue preservation. In fact, the combination of a Morse-taper connection and the principle of platform switching guarantees a perfectly tight connection against microbial growth and a completely stable, reliable, and durable screw-abutment-implant structure.

The principle of platform switching is the use of prosthetics connections (diameter) under dimensioned with respect to the implant neck diameter. This improves bone crest preservation and leads to controlled biological space reposition. According to the different publications, this expanded platform obtains excellent aesthetic outcomes.

The Kontact® range* has a Morse-taper locking system.This system stabilizes the implant-abutment connectionand offers remarkable and recognized mechanical andphysiological advantages:

- Strong resistance to stretching and torsion: the parts

are perfectly interlocked

- No deforming or breaking movement of the screw

Implant

Transfixation screw

Abutment

Tested device

Plat form switching

*The Kontact® range includes Kontact® and Kontact S® implants.

Precl inical study

A study, for Kontact® implant, aimed at appraising the quality of the airtight connection between the prothetic stage and the implant has enabled the reliability of our system to be highlighted. It has demonstrated that our mounting system met all required tightness criteria (Study N° 29J of 30/12/2013).

10

Ø 3.6mm

Ø 4.2mm

Ø 4.8mm

Ø 3.0mm

Ø 5.4mm

Transfer

Black mark to position

in vestibular for easier

identification when

repositioning the transfer

in the impression.

Recommendation ofimplants diameters

TOOTH-EMERGENCE ADEQUACY TABLE

Healing screw

The choice of the screw should also take into account the

emergence and the implant axis without forgetting the tissue

quality and the type of prosthesis to be realized.

Recommendation of healingscrew diameters

Abutment

TeethEmergency Profile

Ø 3 mm Ø 4 mm Ø 5 mm Ø 6.5 mm

Central incisor

Lateral incisor

Incisor

Premolar

Molar

MA

ND

IBLE

TeethEmergency Profile

Ø 3 mm Ø 4 mm Ø 5 mm Ø 6.5 mm

Incisor

Canine

Premolar

Molar

MA

XILL

AR

Y

Ø 3.0 mm

Ø 3.6 mm

Ø 4.2 mm

Ø 4.8 mm

Ø 5.4 mm

11

HEALING SCREWS

All screw heads have a laser marking indicating:

Emergence profile diameter,

Related-abutment height.

Gingival height

In order to avoid blocking the screw into the implant, thoroughly clean the inside

of the same to eliminate the blood.

All of our screws are:

- In TA6V ELI materiel.- Compatible with all implant diameters and adapted to eachabutment.- Over-designed in relation to the final abutment profile.The healing screws must be tightened to a maximum torque of 10 N.cm. (Recommended manuel tightening).

H : Gingival height

Ø : Diameter of the screw

Height 3 mm

Example with Ht. 3 mm

Reference Diameter Height

K30VC

Ø 3 mm

1.5 mmK30VC3 3 mmK30VC4 4 mmK30VC5 5 mmKVC401

Ø 4 mm

1 mmKVC402 2 mmKVC403 3 mmKVC404 4 mmKVC405 5 mmKVC501

Ø 5 mm

1 mmKVC502 2 mmKVC503 3 mmKVC504 4 mmKVC505 5 mmKVC652

Ø 6.5 mm

2 mmKVC653 3 mmKVC654 4 mmKVC655 5 mm

12

7.

8.

9.

1.2.

3.4.

5.6.

7.8. 9.

10.

10.

Contra-angle screwdriver - TCAS

Prehensile connector and angulated base - EAETP

Spherical-tipped screwdriver - EATPES

Screwdriver prosthetic - KTP09

Mountdriver for conical abutment - KMPE

Hexagonal prosthetic screwdriver (12 mm) - 1032

Short hexagonal prosthetic screwdriver (6 mm)Ref. 1032S

Short contra-anglescrewdriverRef. TCAS

Long contra-anglescrewdriverRef. TCAL

Short flathead screwdriverRef. TCTP

References below are not included in the kit but in option:

Long hexagonal prosthetic screwdriver (18 mm) - 1032L

Kontact® implant abutment extractor - KEX

Ø 3 mm Kontact® implant abutment extractor - K30EX

Torque Wrench 10-45N - CD

PROSTHETIC KIT

1.

2.

3.

4.

5.

6.

Ref. KPK

13

Long hexagonal prosthetic screwdriver (18 mm) - 1032L

Kontact® implant abutment extractor - KEX

Ø 3 mm Kontact® implant abutment extractor - K30EX

Torque Wrench 10-45N - CD

Reference Designation

KTPO Pop-up transfer delivered with screw and Plastic cap

KTPOL Long Pop-up transfer delivered with screw and Plastic cap

KVTPO - KVTPOL Pop-up transfer screws (short & long)

KCAP5 Plastic cap (x5)

KTPI Pick-up transfer delivered with screw

KTPIL Long Pick-up transfer delivered with screw

KVTPI - KVTPIL Pick-up transfer screws (short & long)

KTU Short Klip-up plastic transfer

KTUL Long Klip-up plastic transfer

KDIImplant analog except for Ø 3 mm(compatible with the Pop-up, Pick-up and Klip-up systems)

IMPRESSION TRANSFERS & IMPLANT ANALOG

14

NANO-POSTCLIPPED TRANSFERT

NANO-POSTBURNABLE CAP

ANALOGABUTMENT

NANO-POSTABUTMENT

NANO-POSTHEALING CAP

TEMPORARYABUTMENT

CERA-POSTABUTMENT

TITANIUMABUTMENT

FIT-POSTABUTMENT

OVERCASTEDABUTMENT

PROSTHETICSCREWDRIVER

ABUTMENTEXTRACTOR

DEFINITIVESCREW

LABORATORYSCREW

Abutments Transfixation

IMPLANT

POP-UPTRANSFER

Impression

Simplified Technique

KLIP-UPTRANSFER

PICK-UPTRANSFER

ANALOG

HEALING SCREW

Ancil lary

CEMENT-RETAINED PROSTHETIC

15


KP401

Ø 4 mm

1 mm

KP402 2 mm

KP403 3 mm

KP404 4 mm

KP405 5 mm

KP501

Ø 5 mm

1 mm

KP502 2 mm

KP503 3 mm

KP504 4 mm

KP505 5 mm

KP652

Ø 6.5 mm

2 mm

KP653 3 mm

KP654 4 mm

KP655 5 mm


KP401NI

Ø 4 mm

1 mm

KP402NI 2 mm

KP403NI 3 mm

KP404NI 4 mm

KP405NI 5 mm

KP501NI

Ø 5 mm

1 mm

KP502NI 2 mm

KP503NI 3 mm

KP504NI 4 mm

KP505NI 5 mm

KP652NI

Ø 6.5 mm

2 mm

KP653NI 3 mm

KP654NI 4 mm

KP655NI 5 mm

KVP KVPL

STRAIGHT STANDARD ABUTMENTS INDEXED & NON-INDEXED

All abutments are delivered with one permanent transfixation screw (ref. KVP). The laboratory screw (ref. KVPL) is available on request.

The KVP screw

should not be used

by the laboratory.

H : Gingival Height

Ø : Diameter

Straight standard abutments indexed

Straight standard abutments non-indexed

16

Reference Diameter Angulation Height

KPA75401

Ø 4 mm 7.5°

1 mm

KPA75402 2 mm

KPA75403 3 mm

KPA75404 4 mm

KPA75405 5 mm

KPA75501

Ø 5 mm 7.5°

1 mm

KPA75502 2 mm

KPA75503 3 mm

KPA75504 4 mm

KPA75505 5 mm

KPA75652

Ø 6.5 mm 7.5°

2 mm

KPA75653 3 mm

KPA75654 4 mm

KPA75655 5 mm

KPA150401

Ø 4 mm 15°

1 mm

KPA150402 2 mm

KPA150403 3 mm

KPA150404 4 mm

KPA150405 5 mm

KPA150501

Ø 5 mm 15°

1 mm

KPA150502 2 mm

KPA150503 3 mm

KPA150504 4 mm

KPA150505 5 mm

KPA150652

Ø 6.5 mm 15°

2 mm

KPA150653 3 mm

KPA150654 4 mm

KPA150655 5 mm

KPA220401

Ø 4 mm 22°

1 mm

KPA220402 2 mm

KPA220403 3 mm

KPA220404 4 mm

KPA220405 5 mm

KPA220501

Ø 5 mm 22°

1 mm

KPA220502 2 mm

KPA220503 3 mm

KPA220504 4 mm

KPA220505 5 mm

KPA220652

Ø 6.5 mm 22°

2 mm

KPA220653 3 mm

KPA220654 4 mm

KPA220655 5 mm

H : Gingival Height

Ø : Diameter

A° : Angulation

ANGULATED STANDARD ABUTMENTS INDEXED

17

H : Gingival Height

Ø : Diameter

A° : Angulation

Reference Diameter Angulation Height

KPA75401NI

Ø 4 mm 7.5°

1 mm

KPA75402NI 2 mm

KPA75403NI 3 mm

KPA75404NI 4 mm

KPA75405NI 5 mm

KPA75501NI

Ø 5 mm 7.5°

1 mm

KPA75502NI 2 mm

KPA75503NI 3 mm

KPA75504NI 4 mm

KPA75505NI 5 mm

KPA75652NI

Ø 6.5 mm 7.5°

2 mm

KPA75653NI 3 mm

KPA75654NI 4 mm

KPA75655NI 5 mm

KPA150401NI

Ø 4 mm 15°

1 mm

KPA150402NI 2 mm

KPA150403NI 3 mm

KPA150404NI 4 mm

KPA150405NI 5 mm

KPA150501NI

Ø 5 mm 15°

1 mm

KPA150502NI 2 mm

KPA150503NI 3 mm

KPA150504NI 4 mm

KPA150505NI 5 mm

KPA150652NI

Ø 6.5 mm 15°

2 mm

KPA150653NI 3 mm

KPA150654NI 4 mm

KPA150655NI 5 mm

KPA220401NI

Ø 4 mm 22°

1 mm

KPA220402NI 2 mm

KPA220403NI 3 mm

KPA220404NI 4 mm

KPA220405NI 5 mm

KPA220501NI

Ø 5 mm 22°

1 mm

KPA220502NI 2 mm

KPA220503NI 3 mm

KPA220504NI 4 mm

KPA220505NI 5 mm

KPA220652NI

Ø 6.5 mm 22°

2 mm

KPA220653NI 3 mm

KPA220654NI 4 mm

KPA220655NI 5 mm

ANGULATED STANDARD ABUTMENTS NON-INDEXED

18

Reference Designation Diameter Height

KPZ501Zirconium straight

abutments

+ KVP Screw

Ø 5 mm

1.5 mm

KPZ503 3 mm

KPAZ50115° angulated

Zirconium abutments

+ KVP Screw

Ø 5 mm

1.5 mm

KPAZ503 3 mm

CERA-POST ABUTMENTS

Laser identification marking

Cera-Post abutments are designed for very natural ceramo-ceramic restorations.Their use is limited to the anterior sector.

Cera-Post abutments should be touched up under high irrigation with stone bur.

The ceramic can be baked directly on the abutment.

19


KPS453Gold cast-to abutment+ KVP Screw

Ø 4.5 mm 3 mm


KPP451

Titanium temporary

abutments

+ KVP Screw

Ø 4.5 mm

1 mm

KPP452 2 mm

KPP453 3 mm

KPP454 4 mm New

KPP455 5 mm

OVERCASTED ABUTMENT & TEMPORARY ABUTMENTS

CDT (Thermal Dilation Coefficient)- 11.9x10-6 for a temperature between 25 and 500° C,- 12.2x10-6 for a temperature between 25 and 600° C.

Overcasted abutment

Temporary abutments

20


KPU501

Titanium machinable abutments+ KVP Screw

Ø 5 mm

1 mm

KPU502 2 mm

KPU503 3 mm

KPU504 4 mm

KPU505 5 mm

KPU652Titanium machinable abutments+ KVP Screw

Ø 6.5 mm

2 mm

KPU653 3 mm

KPU654 4 mm

KPU655 5 mm


KPU501+

Titanium machinable abutments for highangulations+ KVP Screw

Ø 5 mm

1 mm

KPU502+ 2 mm

KPU503+ 3 mm

KPU504+ 4 mm

KPU505+ 5 mm

FIT-POST ABUTMENTS

Our Fit-Post abutments are:- Made of TA6V ELI,- Indexed,- Machinable.

Specific range in case of high angulation (30°):

Transfixation with KVP screw.

To facilitate small adjustments, the Fit-Post abutment should be screwedin the specific implant analog (ref. KDIMAM) and the entire unit positioned in the grinding handle (ref. MV000).

Note: the universal chuck (KMAMU) may be used to retouch abutments fromothers systems.

Advice for the laboratory:For best results, use of a milling machine is strongly recommended.

21


KPC421

Short abutmentsindexed+ KVP Screw

Ø 4.2 mm

1 mm

KPC422 2 mm

KPC423 3 mm

KPC424 4 mm

KPC425 5 mm

KPC551

Straight abutments indexed

+ KVP Screw

Ø 5.5 mm

1 mm

KPC552 2 mm

KPC553 3 mm

KPC554 4 mm

KPC555 5 mm

KTPC42Clipped transfers

Ø 4.2 mm

KTPC55 Ø 5.5 mm

KCPC42IIndexed castable heads

Ø 4.2 mm

KCPC55I Ø 5.5 mm

KCPC42 Non-indexedcastable heads

Ø 4.2 mm

KCPC55 Ø 5.5 mm

KCCPPC42 Indexed Healing capsin PMMA

Ø 4.2 mm

KCCPPC55 Ø 5.5 mm

KDPC42Analog abutment

Ø 4.2 mm

KDPC55 Ø 5.5 mm

KDPCA42 Angulated abutment analog Ø 4.2 mm

KPCA75421

7.5° angulated Nano-Postabutment + KVP Screw

Ø 4.2 mm

1 mm

KPCA75422 2 mm

KPCA75423 3 mm

KPCA75424 4 mm

KPCA75425 5 mm

KPCA150421

15° angulated Nano-Postabutment + KVP Screw

Ø 4.2 mm

1 mm

KPCA150422 2 mm

KPCA150423 3 mm

KPCA150424 4 mm

KPCA150425 5 mm

NANO-POST ABUTMENTS

The Nano-Post abutments line is ideal for single dentures and small reconstructions on 2 elements, on all types of teeth except in the incisive mandibular sector. It is also useful for multiple prosthetics.

Caution: the abutment should not be adjusted in the mouth because the implantanalog (implant + abutment) would no longer correspond.

22

TEMPORARYABUTMENT

CERA-POSTABUTMENT

TITANIUMABUTMENT

IMPLANT

POP-UPTRANSFER

Impression

KLIP-UPTRANSFER

PICK-UPTRANSFER

ANALOG

HEALING SCREW


ABUTMENTEXTRACTOR

Abutments TransfixationAncil lary

TRANSFIXATIONSCREW

PROSTHETICS ON 3 MM DIAMETER IMPLANT

Note: The Kontact® implant Ø 3 mm is dedicated for the incisive-canine mandibular sector and for single-unit cement-retained prosthesis only.

23

Reference Designation Diameter

K30TPOPop-Up transfer delivered with

screw and Plastic capØ 3 mm

K30VTPO Screw for Pop-Up transfer Ø 3 mm

KCAP Plastic cap (x5) Ø 3 mm

K30TPIPick-up transfer delivered

with screwØ 3 mm

K30VTPI Screw for Pick-Up transfer Ø 3 mm

K30TU Klip-Up plastic transfer Ø 3 mm

PO

P-U

PP

ICK

-UP

KLI

P-U

PØ 3 MM IMPRESSIONS TRANSFERS & IMPLANT ANALOG

These parts are solely intended for the incisive-canine sector and for single-unit cement-retained prosthesis only.

K30DI Implant analog Ø 3 mm

24


K30PZ Straight standardzirconiumabutments+ K30VP Screw

Ø 3 mm1.5 mm

K30PZ3 3 mm

K30PAZ 15° angulated standardzirconiumabutments+ K30VP Screw

Ø 3 mm

1.5 mm

K30PAZ3 3 mm


K30VC

Titaniumhealing screws

Ø 3 mm

1.5 mm

K30VC3 3 mm

K30VC4 4 mm

K30VC5 5 mm

Ø 3 MM HEALING SCREWS & TEMPORARY ABUTMENTS

Healing screws

Manual tightening recommended.

Thoroughly clean the inside of

the implant to eliminated blood

before placing the screw.


K30PP

Temporaryabutments+ K30VP Screw

Ø 3 mm

1.5 mm

K30PP3 3 mm

K30PP4 4 mm

K30PP5 5 mm

Temporary abutments

Fixing Screw ref. K30VP

All our abutments Ø 3 mmare delivered with 1transfixation screw(ref. K30VP).This screw is also usedfor the laboratory.


K30P Straight standardabutments indexed+ K30VPScrew

Ø 3 mm

1.5 mm

K30P3 3 mm

K30P4 4 mm

K30P5 5 mm

K30PA75 7.5° angulated standardabutmentsindexed+K30VP Screw

Ø 3 mm

1.5 mm

K30PA753 3 mm

K30PA754 4 mm

K30PA755 5 mm

K30PA150 15° angulated standardabutmentsindexed+ K30VP Screw

Ø 3 mm

1.5 mm

K30PA1503 3 mm

K30PA1504 4 mm

K30PA1505 5 mm

Indexed Straight & angulated standards abutments

It is possible to bake theceramic directly on thezirconium abutment.

Cera-Post abutments

25

SCREW-RETAINED PROSTHETICS

STRAIGHT CONICALABUTMENTØ 4.9 mm SPHERICAL

TIPPEDSCREWDRIVER

Conical abutment transfixationAncil lary

TRANSFIXATION SCREW FOR ANGULATED CONICAL ABUTMENT

SCREW FOR CASTABLE SLEEVE FOR STRAIGHT CONICALABUTMENT

SCREW FOR BURNABLE SLEEVE FOR NARROW STRAIGHT CONICAL ABUTMENT

IMPLANT

ANGULATED CONICALABUTMENT Ø 4.9 mm

HEALING CAP

STRAIGHTABUTMENTHOLDER

NARROW ANGULATEDCONICAL ABUTMENT

PREHENSIL CONNECTOR & ANGULATED ABUTMENT

Mandatorytools

PICK-UP TRANSFER

POP-UP TRANSFER

ANALOGTEMPORARYABUTMENT

CASTABLE SLEEVE

MIXEDPEEK SLEEVE

BENDINGKIT

SCREWDRIVER PROSTHETIC FORNARROW STRAIGHTCONICAL ABUTMENT

SCREWDRIVER PROSTHETIC FORNARROW STRAIGHTCONICAL ABUTMENT

SCREWDRIVER PROSTHETIC


NARROW STRAIGHT CONICAL ABUTMENTØ 4 mm

26

4-LOAD SYSTEM

The 4-Load system enables you to make a total screwed maxillary or mandibular denturein 4 to 6 implants. The principle is based on the placement of 2 or 4 anterior implants in the straight position and 2 distal angulated implants. The prosthesis will then be made on straight and angulated conical abutments.

Surgery for this system can be assisted byBiotech maxillary and mandibular drilling guidesadapted to all morphologies.

27

Ø 4 MM NARROW STRAIGHT & ANGULATED CONICAL ABUTMENTS

Reference Designation Angulation Diameter Height

KECE1

Narrow straight conical abutments* Ø 4 mm

1 mm

KECE2 2 mm

KECE3 3 mm

KECE4 4 mm

KECE5 5 mm

KEAE174Narrow angulated conical abutments*

17°Ø 4 mm 4 mm

KEAE304 30°

KTP09SScrewdriver prosthetic 8 mmfor narrow straight and angulatedconical abutments

KTP09Screwdriver prosthetic 12 mmfor narrow straight and angulated conical abutments

KTP09LScrewdriver prosthetic 18 mmfor narrow straight and angulated conical abutments

* Caution: compatible with all Kontact® and Kontact® S implants diameters except 3 mm.

FIXED SCREW RETAINED PROSTHESIS FOR NARROW STRAIGHT CONICAL ABUTMENTS (Ø 4 MM)


KECEEATPUPick-up transfer for narrow conical abutment+ 2 screws KECEEAVTPU(L)

KECEEAVTPU Pick-up transfixation screw for narrow conical abutment

KECEEAVTPUL Long Pick-up transfixation screw for narrow conical abutment

KECEEATPO Pop-up transfer for narrow conical abutment

KECEEAAP Analog for narrow conical abutment

KECEPP Temporary PEEK tube for narrow conical abutment+ screw KECEEAVGC

KECEGM Mixed sleeve for narrow conical abutment

KECEGM-1 Titanium sleeve for narrow conical abutment

KECEEAVGC Screw for burnable sleeve for narrow conical abutment

KECEEAGC Burnable tube for narrow conical abutment

KECEEAGP Protection template for narrow conical abutment

KECEEACC4 Healing cap Ht. 4 mm for narrow straight conical abutment

KECEEACC6 Healing cap Ht. 6 mm for narrow straight conical abutment

28

Ø 4.9 MM STRAIGHT CONICAL ABUTMENTS


KEC1

Straight conical abutments* Ø 4.9 mm

1 mm

KEC2 2 mm

KEC3 3 mm

KEC4 4 mm

KEC5 5 mm

KMPE Mountdriver for conical abutment

KMPEMLong mountdriver for conical abutment

*Caution: compatible with all Kontact® and Kontact S® implants diameters except 3 mm one.

FIXED SCREW RETAINED PROSTHESIS FOR STRAIGHT CONICAL ABUTMENTS (Ø 4.9 MM)**

** These items are available in a kit to make casierthe ordering (see the following page 31).


EATPU* Pick-up transfer for conical abutment + 2 screws EAVTPU(L)

EAVTPU* Screw Pick-up transfixation for conical abutment

EAVTPUL* Long screw Pick-up transfixation for conical abutment

EATPO Pop-up transfer for conical abutment

EAAP* Analog for conical abutment

KE-PP Temporary PEEK sleeve for conical abutment + screw EAVGC

KECGM Mixed sleeve for conical abutment + screw KECGMV

KECGMV Screw for mixed sleeve for conical abutment

KECGM-1 Titanium sleeve for sconical abutment + screw KECGMV

EACC* Healing cap for conical abutment Ht. 4 mm

EACC6* Healing cap for conical abutment Ht. 6 mm

EAVGC* Screw fo castable sleeve for conical abutment

EAGC* Castable sleeve for conical abutment + screw EAVGC

EAGP Protection template for conical abutment

This equipment is compatible with the2 types of conical abutments (straightand angulated). For optimal use of thisequipment please refer to the protocoldelivered with the kit.

29

Ø 4.9 MM ANGULATED CONICAL ABUTMENTS INDEXED & NON-INDEXED

Angulated conical indexed abutments (Ø 4.9 mm)*

Reference Designation Diameter Angulation Height

KEA172Angulated conical indexedabutments+ Screw KVP

Ø 4.9 mm 17°

2 mm

KEA173 3 mm

KEA174 4 mm

KEA175 5 mm

KEA302Angulated conical indexedabutments+ Screw KVP

Ø 4.9 mm 30°

2 mm

KEA303 3 mm

KEA304 4 mm

KEA305 5 mm

Angulated conical non-indexed abutments (Ø 4.9 mm)*

Reference Designation Diameter Angulation Height

KEA172NI Angulated conical non-indexedabutments+ Screw KVP

Ø 4.9 mm 17°

2 mm

KEA173NI 3 mm

KEA174NI 4 mm

KEA175NI 5 mm

KEA302NI Angulated conical non-indexedabutments+ Screw KVP

Ø 4.9 mm 30°

2 mm

KEA303NI 3 mm

KEA304NI 4 mm

KEA305NI 5 mm


*Caution: compatible with all Kontact® and Kontact S® implants diameters except 3 mm one.

30

KITS FOR CONICAL ABUTMENTS & BENDING LEVER KIT

The entire prosthetic equipment (except ancillary) is available as a kit to makeeasier the ordering.

Kit for straight conical abutments


KECKIT Kit for Kontact® Ø 4.9 mm straight conical abutments

Kit for angulated conical abutments


KEAKIT Kit for Kontact® Ø 4.9 mm angulated conical abutments

Bending lever ki t

Kit for bending burnable tubes to manage theemergence of transfixation well openings.


KELCKIT Bending lever kit

31

ISO-POST PROSTHETICS & LOCATOR®

TRY-IN ABUTMENT

ISO-POST ABUTMENT

IMPLANT

PARALLEL GAUGES

CASTABLE IMPRESSION CAP

ISO-POST CAP

NON-INDEXEDTITANIUM CAP

TITANIUM CAPTO STICK

TEMPORARY PMMA CAP

NON-INDEXED GOLD CAP

IMPLANT

LOCATOR®

THREE TOOL ON ONE

LOCATOR®

ABUTMENT

TRANSFER

ANALOG

PLA

CEM

ENT

DIR

ECTL

YA

T TH

E D

ENTA

L C

LIN

IC

BALLABUTMENT

O’RINGATTACHMENT

ANGULATED LOCATOR®

CONICAL ABUTMENT

SPHERO-BLOCKATTACHMENT

LOCATOR®ISO-POST

BALL ABUTMENT

32

BALL ABUTMENTS & ISO-POST ABUTMENTS

Ball abutments : Kbal l + box

Reference Designation Height

KBALL1

Ball abutments

1 mm

KBALL2 2 mm

KBALL3 3 mm

KBALL4 4 mm

KBALL5 5 mm

092CCASphero Block attachmentPink sheath = strongher retentionYellow sheath = softer retention

R000 O’Ring attachment

KDBALL Analog of ball abutment

I so -Post straight & angulated abutments

Reference Designation Angulation Heightsulcus

KPIP150Iso-Post straighttelescopic abutments+ KVP Screw

0°

1.5 mm

KPIP300 3 mm

KPIP500 5 mm

KPIPA75150 Iso-Post angulatedtelescopic abutments+ KVP Screw

7.5 °

1.5 mm

KPIPA75300 3 mm

KPIPA75500 5 mm

KPIPA150150

Iso-Post angulatedtelescopic abutments+ KVP Screw

15°

1.5 mm

KPIPA150300 3 mm

KPIPA150500 5 mm

KPIPA220150 Iso-Post angulatedtelescopic abutments + KVP Screw

22°

1.5 mm

KPIPA220300 3 mm

KPIPA220500 5 mm

KDIPAnalogs

0°

KDIP150 15°

33

ISO-POST

Iso-Post abutments can also be used for:- Removable/fixed dentures on implants,- Stabilized full denture on implants (depending on the number of implants and distribution on the arch),- Fixed denture to replace one or more teeth with and without cement (NoCem design).


Reference Designation Angulation

KCCIP Castable impression cap

KCOIP Non-indexed gold cap

KCTIPC Titanium cap to stick

KCTIP Non-indexed Titanium cap

KCPIP Temporary PMMA cap

KJIP

Parallel gauges

0°

KJIP75 7.5°

KJIP150 15°

KJIP220 22°

KAIP Placement key

34

ISO-POST TRY-IN ABUTMENTS

Iso-Post Try-in abutments can be used to choose the angulations and transgingival heights of Iso-Post abutments in the dental clinic or laboratory.

References Designation Angulation Heightsulcus

KPIP150JFIso-Post Try-in abutments 0°

1.5 mm

KPIP300JF 3 mm

KPIP500JF 5 mm

KPIPA75150JFIso-Post Try-in abutments 7,5 °

1.5 mm

KPIPA75300JF 3 mm

KPIPA75500JF 5 mm

KPIPA150150JFIso-Post Try-in abutments 15°

1.5 mm

KPIPA150300JF 3 mm

KPIPA150500JF 5 mm

KPIPA220150JFIso-Post Try-in abutments 22°

1.5 mm

KPIPA220300JF 3 mm

KPIPA220500JF 5 mm

35

Reference Designation Angulation Height Retention strengh

01792

Locator® abutments

1 mm

01793 2 mm

01794 3 mm

01795 4 mm

01796 5 mm

01797 6 mm

8393 Locator® three tooll on one

08394 Retention cup

8505 Transfer

8530 Analog

8519-2 Female attachment (delivered with block tube)

8524 Transparent tubes (x4)Between

0° and 20°2 270 g

8527 Pink tubes (x4)Between

0° and 20°1 360 g

8529 Blue tubes (x4)Between

0° and 20°680 g

8548 Red tubes (x4) > 20° 260 g

8547 Green tubes (x4) > 20° 1 820 g

8915 Yellow tubes (x4) > 20° 907 g

The Locator® abutment can be used for a stabilized full denture on 2 or 4 implants.


08909-2Angulated Locator®

used with angulated conicalabutment (x2)

LOCATOR® SYSTEM

* Conical abutment should be order separatly.

36

STRAIGHT & ANGULATED STANDARD TRY-IN ABUTMENTS FOR KONTACT® & KONTACT S® RANGE

The try-in abutments are exact replicas of the Kontact® prosthetic abutments,available in all angulation and all gingival heights.


KPJFKITV Empty try-in abutment kit

KPJF401

Straight standardTry-in abutments

0° 4 mm

1 mm

KPJF402 2 mm

KPJF403 3 mm

KPJF404 4 mm

KPJF405 5 mm

KPAJF75401

Angulated standardTry-in abutments

7.5° 4 mm

1 mm

KPAJF75402 2 mm

KPAJF75403 3 mm

KPAJF75404 4 mm

KPAJF75405 5 mm

KPAJF150401


15° 4 mm

1 mm

KPAJF150402 2 mm

KPAJF150403 3 mm

KPAJF150404 4 mm

KPAJF150405 5 mm

KPAJF220401


22° 4 mm

1 mm

KPAJF220402 2 mm

KPAJF220403 3 mm

KPAJF220404 4 mm

KPAJF220405 5 mm

Straight & angulated standard Try - in abutmentsNEW

37

STRAIGHT & ANGULATED STANDARD TRY-IN ABUTMENTS FOR KONTACT® & KONTACT S® RANGE

NEWReference Designation Angulation Diameter Height

K30PJF

Straight Ø 3 mmTry-in abutments

0° 3 mm

1.5 mm

K30PJF3 3 mm

K30PJF4 4 mm

K30PJF5 5 mm

K30PAJF75


7.5° 3 mm

1.5 mm

K30PAJF753 3 mm

K30PAJF754 4 mm

K30PAJF755 5 mm

K30PAJF150


15° 3 mm

1.5 mm

K30PAJF1503 3 mm

K30PAJF1504 4 mm

K30PAJF1505 5 mm

Straight & angulated Try - in abutments Ø 3 mm

Ø 3 MM STRAIGHT & ANGULATED TRY-IN ABUTMENTS FOR KONTACT® & KONTACT S® RANGE

38


KPCJF421

Straight Nano-PostTry-in abutments

0° 4.2 mm

1 mm

KPCJF422 2 mm

KPCJF423 3 mm

KPCJF424 4 mm

KPCJF425 5 mm

KPCAJF75421

AngulatedTry-in Nano-Postabutments

7,5° 4.2 mm

1 mm

KPCAJF75422 2 mm

KPCAJF75423 3 mm

KPCAJF75424 4 mm

KPCAJF75425 5 mm

KPCAJF150421

AngulatedTry-in Nano-Postabutments

15° 4.2 mm

1 mm

KPCAJF150422 2 mm

KPCAJF150423 3 mm

KPCAJF150424 4 mm

KPCAJF150425 5 mm

STRAIGHT & ANGULATED NANO-POST TRY-IN ABUTMENTS FOR KONTACT® & KONTACT S®

Straight & angulated Nano -Post Try - in abutmentsNEW

39


KECEJF1

Narrow straight conicalTry-in abutments

0° 4 mm

1 mm

KECEJF2 2 mm

KECEJF3 3 mm

KECEJF4 4 mm

KECEJF5 5 mm

KECJF1

Straight conicalTry-in abutments

0° 4.9 mm

1 mm

KECJF2 2 mm

KECJF3 3 mm

KECJF4 4 mm

KECJF5 5 mm

KEAFJ172

Angulated conicalTry-in abutments

17° 4.9 mm

2 mm

KEAJF173 3 mm

KEAJF174 4 mm

KEAJF175 5 mm

KEAJF302

Angulated conicalTry-in abutments

30° 4.9 mm

2 mm

KEAJF303 3 mm

KEAJF304 4 mm

KEAJF305 5 mm

CONICAL TRY-IN ABUTMENTS FOR KONTACT® & KONTACT S®

Conical Try - in abutmentsNEW

40


KLOC1JF Locator® Try-in abutment 1 mm






Locator® Try- in abutments

LOCATOR® TRY-IN ABUTMENTS FOR KONTACT® & KONTACT S®

NEW

41

OTHERS EQUIPMENTS

Laboratory stage


K30DIMAM Ø 3 mm implant analog for grinding handle

KDIMAM Implant analog for all diameters for grinding handle

KMAMU Universal chuck for grinding handle

MV000 Grinding handle

LABS

Clinic stage


KMPIMAM-C Short implant holder chuck for grinding handle

KMPIMAM-L Long implant holder chuck for grinding handle

1033MAM-C Short hexagonal screwdriver

1033MAM-L Long hexagonal screwdriver

CLINIC

42

OTHERS EQUIPMENTS

Broken screws extractor


KEVK Broken screws extractor kit

KEVCLeft drill left to center tobroken screws extractor

KEVFLeft drill Ø 0.8 mmfor broken screws extractor

KEVECSpacer for center drillbroken screws extractor

KEVEFSpacer for drill Ø 0.8 mmbroken screws extractor

Str ipped screws extractor


KEV6PM Stripped screws extractor New

KEV6PExa screws extractor for cover and healing screws

New

43

CAD CAM ABUTMENTS

Titanium bases for standard implants

Reference Designation HeightChimney

GingivalHeight

KPSCANScan locator for Kontact® implants + KVPL Screw

4 mm

KPCADCAM4007

Titanium bases Ø 4 mm for Kontact® implant CAD CAM abutment+ KVP screw

0.7 mm

KPCADCAM4010 1 mm

KPCADCAM4020 2 mm New

KPCADCAM4030 3 mm

KPCADCAM4040 4 mm

KPCADCAM4050 5 mm

KPCADCAM5007

Titanium bases Ø 5 mm for Kontact® implant CAD CAM abutment+ KVP screw

0.7 mm


KPCADCAM5020 2 mm

KPCADCAM5030 3 mm

KPCADCAM5040 4 mm

KPCADCAM5050 5 mm

KPCADCAM6520Titanium bases Ø 6.5 mm for Kontact® implant CAD CAM abutment+ KVP screw

2 mm


KPCADCAM6540 4 mm

KPCADCAM6550 5 mm

H : Gingival Height

Ø : Diameter

A° : Angulation

NEW

44

CAD CAM ABUTMENTS

Long Ti tanium bases for standard implants

Reference Designation Chimney Height

Gingival Height

KPSCANScan locator for Kontact®

implants + KVPL Screw

5.5 mm

KPCADCAM4007L

Long Titanium bases Ø 4 mm for Kontact® implant CAD CAM abutment+ KVP screw

0.7 mm

KPCADCAM4010L 1 mm

KPCADCAM4020L 2 mm New

KPCADCAM4030L 3 mm

KPCADCAM4040L 4 mm

KPCADCAM4050L 5 mm

KPCADCAM5007L

Long Titanium bases Ø 5 mm for Kontact® implant CAD CAM abutment+ KVP screw

0.7 mm


KPCADCAM5020L 2 mm

KPCADCAM5030L 3 mm

KPCADCAM5040L 4 mm

KPCADCAM5050L 5 mm

KPCADCAM6520LLong Titanium bases Ø 6.5 mm for Kontact® implant CAD CAM abutment+ KVP screw

2 mm


KPCADCAM6540L 4 mm

KPCADCAM6550L 5 mm

H : Gingival Height

Ø : Diameter

A° : Angulation

Ti tanium bases for Ø 3 mm implants


K30PSCANScan locator for Ø 3 mm implants Kontact®

+ K30VP Screw

K30PCADCAM1

Titanium bases for Ø 3 mm implantsCAD CAM abutments + K30VP Screw

1 mm

K30PCADCAM3 3 mm

K30PCADCAM5 5 mm

NEW

45

CAD CAM ABUTMENTS


KECSCANScan locator for Kontact® conical abutment Ø 4.9 mm+ EAVGC Screw

KECCADCAMTitanium base Ø 4.9 mm for Kontact® implants for CAD CAM conical abutments+ EAVGC Screw

KECESCANScan locator for Kontact® narrow conical abutment Ø 4 mm+ KECEEAVGC Screw

KECECADCAMTitanium base Ø 4 mm for Kontact® implants for CAD CAM narrow conical abutments+ KECEEAVGC Screw

Ti tanium bases for conical abutments

NEW

46

NOTES

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

....................................................................................................................................................

47

GENERAL INFORMATION

305, Allées de Craponne

13300 Salon de Provence

Phone: +33 (0)4 90 44 60 60

Fax: +33 (0)4 90 44 60 61

E-mail: [email protected]

Web: www.biotech-dental.com

To order, please contact our team

Export Director:

Céline Carvalho : [email protected]

Area Sales Managers:

Nabila Abed: [email protected]

Raisa Basiul: [email protected]

Kathleen Perret: [email protected]

Thomas Lecourt: [email protected]

Artiom Ryabinin: [email protected]

Hours

8h30 - 12h30 – 13h30 - 18h00 (from Monday to Thursday)

8h30 - 12h30 – 13h30 - 17h00 (Friday)

Training center

Proposed training courses:

Clinical training

Prothesis training

Theme days

KON

-BR-

2-EN

_Rév

.01_

02/2

017

Biotech Dental305, Allées de Craponne 13300 Salon de Provence - FRANCE

Tél. : +33 (0)4 90 44 60 60 Fax : +33 (0)4 90 44 60 61

[email protected]

www.biotech-dental.com

Manufactured and distributed by Biotech Dental.

Documents

BIOTECH DENTAL GROUP, 2.0 DENTAL OFFICE PARTNER. · BIOTECH DENTAL GROUP, 2.0 DENTAL OFFICE PARTNER. ... Allow practitioners to offer the best products at the best prices for their