Upload
andy-soxx
View
316
Download
1
Tags:
Embed Size (px)
Citation preview
1186
Gas Springs
Our most popular gas springs are perfect for handling a variety of open-assist applica-tions. Use them with your choice of fittings (unless noted), mounting studs, and mounting brackets (sold separately; see pages 1187 and 1188)—just be sure to match the rod and end thread sizes. Temperature range is –22° to +176° F, unless noted. To Order : Please specify force from those available below. If you don’t see the exact force you need, just round up to the closest available force.
Steel—All have a steel cylinder and piston rod. The seal is rubber. Type 316 Stainless Steel—The choice for corrosion resistance. All have a Type 316 stainless steel cylinder and piston rod. The seal is fluoroelastomer, unless noted.
� Seal is rubber. � Temp. range is –10° to +176° F. ▲ Not for use with 13 mm ball-socket fittings. � Temp. range is –5° to +158° F.
Extend.Lg. (A)
Comp.Lg. (B)
StrokeLg. (C) Available Force, lbs.
RodDia. (D)
CylinderDia. (E) Steel
Type 316Stainless Steel
M6 Rod and End Thread Size 5.51�. . . . . . 3.54�. . . . . 1.97�. . . . . 15, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 . . . 0.32� . . . . . . . . 0.75� . . . . . . . 9416K14 . . . . . . $11.44 4175T1� . . $47.20 5.9� . . . . . . . . 3.54�. . . . . 2.36�. . . . . 15, 20, 30, 40, 50, 60, 70, 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.24� . . . . . . . . 0.59� . . . . . . . 9416K11 . . . . . . 9.35 4175T2� . . 41.40 8.15�. . . . . . 4.61�. . . . . 3.54�. . . . . 15, 20, 30, 40, 50, 60, 70, 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.24� . . . . . . . . 0.59� . . . . . . . 9416K12 . . . . . . 11.15 4175T4� . . 44.30 8.35�. . . . . . 5.2� . . . . . . . 3.15�. . . . . 15, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 . . . 0.32� . . . . . . . . 0.75� . . . . . . . 9416K24 . . . . . . 11.69 4175T3� . . 49.4010.71�. . . . . . 6.77�. . . . . 3.94�. . . . . 15, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 . . . 0.32� . . . . . . . . 0.75� . . . . . . . 9416K15 . . . . . . 12.30 4175T5. . . . . . 53.7313.74�. . . . . . 8.23�. . . . . 5.51�. . . . . 15, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 . . . 0.32� . . . . . . . . 0.75� . . . . . . . . . . . . . 4175T6. . . . . . 57.6613.74�. . . . . . 8.27�. . . . . 5.47�. . . . . 15, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 . . . 0.32� . . . . . . . . 0.75� . . . . . . . 9416K16 . . . . . . 12.28 . . . . . .
15.63�. . . . . . 9.33�. . . . . 6.3� . . . . . . . 15, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 . . . 0.32� . . . . . . . . 0.75� . . . . . . . 9416K17 . . . . . . 12.85 4175T7. . . . . . 60.3018.19�. . . . . . 10.32�. . . . . 7.87�. . . . . 15, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 . . . 0.32� . . . . . . . . 0.75� . . . . . . . . . . . . . 4175T8. . . . . . 61.4118.22�. . . . . . 10.35�. . . . . 7.87�. . . . . 15, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 . . . 0.32� . . . . . . . . 0.75� . . . . . . . 9416K18 . . . . . . 14.06 . . . . . .
18.62�. . . . . . 10.35�. . . . . 8.27�. . . . . 15, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 . . . 0.32� . . . . . . . . 0.75� . . . . . . . 9416K19 . . . . . . 14.46 4175T9. . . . . . 63.2222.36�. . . . . . 12.52�. . . . . 9.84�. . . . . 15, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130 . . . 0.32� . . . . . . . . 0.75� . . . . . . . 9416K2 . . . . . . . . 16.88 4175T15 . . . 65.97M8 Rod and End Thread Size18.18�. . . . . . 10.31�. . . . . 7.87�. . . . . 25, 50, 75, 100, 125, 150, 175, 200, 225, 250 . . . . . . . . . . . . . . . . 0.39� . . . . . . . . 0.87� . . . . . . . 9416K28 . . . . . . 16.32 . . .
18.23�. . . . . . 10.36�. . . . . 7.87�. . . . . 25, 50, 75, 100, 125, 150, 175, 200, 225, 250 . . . . . . . . . . . . . . . . 0.39� . . . . . . . . 0.87� . . . . . . . . . . . . . 4175T21 . . . 70.2826.38�. . . . . . 16.14�. . . . . 10.24�. . . . . 25, 50, 75, 100, 125, 150, 175, 200, 225, 250 . . . . . . . . . . . . . . . . 0.39� . . . . . . . . 0.87� . . . . . . . 9416K21 . . . . . . 18.32 4175T23 . . . 81.4128� . . . . . . . . . . . 15.2� . . . . . . . 12.8� . . . . . . . 25, 50, 75, 100, 125, 150, 175, 200, 225, 250 . . . . . . . . . . . . . . . . 0.39� . . . . . . . . 0.87� . . . . . . . 9416K22 . . . . . . 18.77 4175T25 . . . 85.6629.33�. . . . . . 15.56�. . . . . 13.77�. . . . . 25, 50, 75, 100, 125, 150, 175, 200, 225, 250 . . . . . . . . . . . . . . . . 0.39� . . . . . . . . 0.87� . . . . . . . 9416K54� . . . 16.97 . . .
33.94�. . . . . . 17.8� . . . . . . . 16.14�. . . . . 25, 50, 75, 100, 125, 150, 175, 200, 225, 250 . . . . . . . . . . . . . . . . 0.39� . . . . . . . . 0.87� . . . . . . . 9416K23 . . . . . . 21.01 4175T27 . . . 97.92M10 Rod and End Thread Size18.9� . . . . . . . . 10.9� . . . . . . . 8� . . . . . . . . . . 200, 250, 300▲, 350▲, 400▲, 500▲, 550▲. . . . . . . . . . . . . . . . . . . . . . 0.55� . . . . . . . . 1.1� . . . . . . . . . 9416K51� . . 68.75 4175T35 . . . 112.4826.77�. . . . . . 14.77�. . . . . 12� . . . . . . . . . . 200, 250, 300▲, 350▲, 400▲, 500▲, 550▲. . . . . . . . . . . . . . . . . . . . . . 0.55� . . . . . . . . 1.1� . . . . . . . . . 9416K52� . . 82.08 4175T36 . . . 128.8034.84�. . . . . . 18.84�. . . . . 16� . . . . . . . . . . 200, 250, 300▲, 350▲, 400▲, 500▲, 550▲. . . . . . . . . . . . . . . . . . . . . . 0.55� . . . . . . . . 1.1� . . . . . . . . . 9416K53� . . 109.00 4175T37 . . . 156.07
EEndThread
RodThread
D
A
B C
Gas Springs
About Gas Springs
Choosing the Right Force
Gas springs are typically used to assist in opening lids, covers, windows, conveyors, and seats—similar to a hatchback opening on a car. If you want to close an object, you will need a close-assist gas spring (see page 1191).
Note: All gas springs contain pressurized nitrogen gas as well as hydraulic fluid that lubricates the seal and provides slam-resistant damping at the end of the stroke. To avoid loss of force, you should store and install gas springs rod-end down.
Your gas spring must have enough force to lift your object and hold it open, yet not too much force that you can’t push it back to its original position. To determine the right amount of force, you’ll need to know the weight of the object you’re moving. One way to do this is to use a force or tension gauge (see page 1561).
Estimating Force—If you can’t weigh your object, use the following chart to help determine its weight so you can estimate the force you’ll need:
Choosing the Right Extended and Compressed Length
To determine the extended length that’s right for your application, open your lid as wide as you need and measure the distance between the two mounting points. For compressed length, close your lid (or lower it to where you need it) and measure the distance between the two mounting points.
A Guide to Choosing the Correct Gas SpringsThe examples at left illustrate how the length, weight, and opening direction of your object as well
as the mounting position of the springs can affect which gas springs are right for your application. Find an example that is similar to your application and use it as a guide to select your springs. The specifications are based on using two gas springs (one on each side of the object), a 90° opening, and the center of gravity at the middle of the object. Note: The recommended force rating is per spring.
ObjectLength
ZWY
X
Z
X
W
Y
ObjectLength
ExtendedLength
CompressedLength
Horizontal-to-Vertical Lift
Vertical-to-Horizontal Lift
For ObjectLength
For ObjectWeight
Recommended Gas Spring Recommended Mounting PositionForce Rating
Extend. Length
Comp. Length (W) (X) (Y) (Z)
Horizontal-to-Vertical Lift 12� 20 lbs. 40 lbs. 10.71� 6.77� 1� 1� 11.19� 0.89�12� 40 lbs. 40 lbs. 10.71� 6.77� 1� 1.5� 10.69� 0.89�18� 60 lbs. 70 lbs. 13.74� 8.27� 1� 2.5� 12.72� 0.89�18� 100 lbs. 100 lbs. 13.74� 8.27� 1.25� 3� 12.22� 0.89�30� 40 lbs. 50 lbs. 18.22� 10.35� 2� 3.5� 16.18� 0.89�
Vertical-to-Horizontal Lift 12� 20 lbs. 40 lbs. 10.71� 6.77� 2.5� 12.22� 0.89� 2� 12� 40 lbs. 50 lbs. 10.71� 6.77� 2.5� 11.77� 0.89� 3�18� 60 lbs. 100 lbs. 13.74� 8.27� 2.5� 15.09� 0.89� 3�18� 100 lbs. 130 lbs. 13.74� 8.27� 2.5� 14.66� 0.89� 4�30� 40 lbs. 70 lbs. 18.22� 10.35� 1.5� 19.32� 0.89� 5.5�
Material Weight per S quare Foot (12 � � 12�)Steel Aluminum Plastic
1/ 16 � � Thick. 2.65 lbs. 0.83 lbs. 0.17 lbs. 1 / 8 � Thick. 5.21 lbs. 1.71 lbs. 0.58 lbs. 1/ 4 � � Thick. 10.46 lbs. 3.61 lbs. 1.10 lbs.
1187
Gas SpringsFor information about gas springs, see page 1186.
(Continued on following page)
The most versatile gas-spring fittings, these ball-socket fittings rotate in any direction to compensate for misalignment. They require a ball stud or ball bracket (sold separately below) to mount your gas spring. The ball sockets easily snap right onto the stud/bracket ball—just make sure
the sockets and studs/brackets have the same ball size. All sockets have safety clips for secure attachment to studs/brackets except for quick-release sockets, which do not require clips (nylon socket has a snap-on cover to securely hold the ball; steel socket is spring loaded).
Need to mount your gas spring? We offer an array of fittings, mounting studs, and mounting brackets to meet your requirements. You can use the same or two different style fittings on each end of your gas spring. Be sure to match the rod and end thread size of your gas spring to the thread size of the fittings. The fittings will increase your gas spring’s extended and compressed lengths, so add the (A) value for each fitting you attach.
Fits Ball Size Material (A) (B) (C)Standard Sockets for M6 Threaded Gas Springs10 mm .... . . Glass-Filled Nylon ... . . . . . . . . . 0.75� . . 0.37� . . 0.66� . . 9416K86 . . $1.2810 mm .... . . Black Dichromate Steel .. 0.75� . . 0.29� . . 0.59� . . 9416K74 . . 1.9810 mm .... . . Type 316 Stain. Steel .. . . . . . 1� . . . . . . . . 0.28� . . 0.62� . . 9424K23 . . 7.90
Standard Sockets for M8 Threaded Gas Springs10 mm .... . . Glass-Filled Nylon ... . . . . . . . . . 0.75� . . 0.37� . . 0.69� . . 9416K76 . . 1.4110 mm .... . . Zinc-Plated Steel .. . . . . . . . . . . . 0.75� . . 0.29� . . 0.58� . . 9416K79 . . 2.9610 mm .... . . Type 304 Stain. Steel .. . . . . . 0.87� . . 0.28� . . 0.58� . . 9424K12 . . 15.99
Fits Ball Size Material (A) (B) (C)Standard Sockets for M8 Threaded Gas Springs (Cont.)13 mm .... . . Zinc-Plated Steel .. . . . . . . . . 1.18� . . . 0.38� . . . 0.76� . . . 9416K75 . . $4.1213 mm .... . . Type 316 Stain. Steel .. . . 1.2�. . . . . . 0.35� . . . 0.76� . . . 9424K24 . . 9.24Standard Sockets for M10 Threaded Gas Springs13 mm .... . . Type 304 Stain. Steel .. . . 1.18� . . . 0.37� . . . 0.75� . . . 9424K17 . . 35.9016 mm .... . . Zinc-Plated Steel .. . . . . . . . . 1.38� . . . 0.45� . . . 0.94� . . . 9416K45 . . 9.44Quick-Release Sockets for M6 Threaded Gas Springs10 mm .... . . Glass-Filled Nylon ... . . . . . . 0.71� . . . 0.41� . . . 0.83� . . . 9416K78 . . 1.1710 mm .... . . Epoxy-Coated Steel .. . . . 1.25� . . . 0.31� . . . 0.70� . . . 9416K47 . . 4.44
Ball-Socket Fittings
Quick-Release Nylon
C
ABAB
C
Standard Nylon
C
AB
Standard Steel and Stainless Steel Quick-Release Steel
C
AB
Gas-Spring End Fittings and Brackets
Mount your gas spring in almost any position: snap its ball socket (sold separately above) onto the ball of one of these studs or brackets.
Ball Studs—Mount directly into any panel, lid, or door.Ball Brackets—Fasteners for attaching brackets are not included.Steel and stainless steel brackets have mounting holes for attach-
ing to a lid, wall, or other surface. Brackets with a 10 mm ball have 0.2� dia. mounting holes; all others have 0.26� dia. holes.
Aluminum brackets do not have mounting holes and can be welded or drilled to your customized hole pattern. Ball is zinc-plated steel.
Mounting Ball Studs and Ball Brackets
BALL STUDS
MaterialThreadSize
O’allLg.(D)
ThreadLg.(E)
With 10 mm Ball1 ... Zinc-Plated Steel ................ 5/16�-18 ........ 1.19� ... 0.55� .... 9512K73 .. $1.031 ... Zinc-Plated Steel ................ 5/16�-18 ........ 1.63� ... 0.75� .... 9512K63 .. 1.791 ... Type 303 Stainless Steel ... 5/16�-18 ........ 1.41� ... 0.75� .... 9512K98 .. 3.341 ... Type 316 Stainless Steel ... 5/16�-18 ........ 1.41� ... 0.75� .... 9512K88 .. 7.83With 13 mm Ball1 ... Zinc-Plated Steel ................ 5/16�-18 ........ 1.38� ... 0.59� .... 9512K18 .. 1.191 ... Zinc-Plated Steel ................ 5/16�-18 ........ 1.79� ... 1� .......... 9512K19 .. 1.791 ... Type 303 Stainless Steel ... 5/16�-18 ........ 1.54� ... 0.75� .... 9512K21 .. 4.781 ... Type 316 Stainless Steel ... 5/16�-18 ........ 1.54� ... 0.75� .... 9512K22 .. 9.88With 16 mm Ball1 ... Zinc-Plated Steel ................ 3/8�-16 .......... 1.85� ... 0.75� .... 9512K47 .. 9.001 ... Type 304 Stainless Steel ... M12 � � 1.75 ... 1.68� ... 0.75� .... 9512K49 .. 16.38
D
E
1
M10 Thread Assortment—Has two steel ball sockets with retaining clips, two aluminum eyelet fittings, and two steel ball studs.
M8 Thread Assortment—Has two steel and two nylon ball sockets with retaining clips, two zinc eyelet fittings, and four steel ball studs.
M6 Thread Assortment—Has two steel and two nylon ball sockets with retaining clips, two zinc eyelet fittings, and two steel ball studs.
M6 Thread Assortment
9416K98 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $44.00
9416K96 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.72
Fitting Assortments
9416K95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $11.04
0.5˝
0.78˝
2.5˝2˝
0.83˝
0.68˝
0.82˝
1.75˝
2.5˝1.75˝
1.125˝
0.82˝0.25˝
1.5˝
2.5˝1.75˝
1.23˝
121.5˝
1.23˝0.25˝
2.5˝1.75˝
0.82˝
110.83˝
1.5˝1˝
1.72˝ 9
0.83˝
1.5˝1˝
1.72˝
6
0.645˝
0.93˝
4.07˝
2˝0.94˝
3˝
7
0.645˝
0.93˝
4.07˝
2˝0.94˝
3˝
2.53˝
0.94˝
0.25˝
2.125˝ 1.56˝
0.645˝
1.5˝
0.645˝
1.2˝
0.37˝
2˝1.5˝
0.645˝
1.45˝2.25˝
1.5˝
0.25˝
2
• Ball height is 0.645�. � Ball height is 0.87�.
8
BALL BRACKETS
Aluminum
Thick.Zinc-Plated
Steel300 Series
Stainless Steel Thick.With 10 mm Ball 2 ... 0.08� ....9512K91 ....$1.00 9512K11 .... $4.75 0.12� ... 4536T1 .. $4.99 3 ... 0.11� ....9512K92 .... 1.03 9512K12 .... 5.00 0.12� ... 4536T2 .. 4.75 4 ... 0.11� ....9512K93 .... 1.89 9512K13 .... 6.02 0.12� ... 4536T3 .. 5.41 5 ... 0.08� ....9512K94 .... 2.00 9512K14 .... 19.14 0.07� ... 4536T4 .. 14.15 6 ... 0.08� ....9512K95 .... 1.67 9512K15 .... 5.18 0.06� ... 4536T5 .. 5.41 7 ... 0.14� ....9512K61 .... 4.07 .... ... ..
8 ... 0.14� ....9512K62 .... 4.07 .... ... ..
9 ... 0.08� ....9512K96 .... 1.78 9512K16 .... 5.10 0.12� ... 4536T6• 8.0910 ... 0.08� ....9512K97 .... 1.78 9512K17 .... 5.10 0.12� ... 4536T7• 8.09With 13 mm Ball11 ... 0.25� ....5992K31 ....26.81 5992K14 .... 49.74 ... ..
12 ... 0.25� ....5992K32 ....32.79 5992K15 .... 61.03 ... ..
13 ... 0.25� ....5992K33 ....34.62 5992K16 .... 64.51 ... ..
With 16 mm Ball �11 ... 0.25� ....5992K11 ....36.27 5992K21 .... 54.32 ... ..
12 ... 0.25� ....5992K12 ....46.64 5992K22 .... 68.33 ... ..
13 ... 0.25� ....5992K13 ....51.02 5992K23 .... 72.15 ... ..
3 4
0.9˝
0.83˝
2.25˝1.56˝
0.6˝
5
10
13
1188
Gas SpringsFor information about gas springs, see page 1186.
A heavy duty alternative to eyelet fittings, these clevis fittings offer a bidirectional pivot point at the end of your gas spring. Clevis is zinc-plated steel and includes a zinc-plated steel spring pin.
For Gas Spring Thread Size (A) (B) (C)
Pin Dia. (D)
M6 . . . . . . . . . . . . . . . . . . . . . . 0.94� . . . 0.28� . . . 0.24� . . . 0.24� . . . 0.47� . . 2448K45 . . . . $4.79M8 . . . . . . . . . . . . . . . . . . . . . . 1.26� . . . 0.39� . . . 0.32� . . . 0.32� . . . 0.63� . . 2448K47 . . . . 5.36M10 . . . . . . . . . . . . . . . . . . . . 1.57� . . . 0.47� . . . 0.39� . . . 0.39� . . . 0.79� . . 2448K49 . . . . 6.25
Clevis FittingsA B
C D
Protect the most vulnerable parts of your gas spring.
Seal Protectors—Made of rubber.
Rod Bellows—Made of abrasion- and chemical-resistant Goralon rub-ber. Attach using the included clips.
ForCylinderDia.
SealProtectors
Rod Bellows ForStroke Lg.
0.59� . . . . . . . . . . . . . . . . . . . Up to 3.54� . . . . . . . . 4159T11 . . $26.950.75� . . . . . . . . . . . . . . 4185T11 . . . . . $1.60 Up to 8.50� . . . . . . . . 4159T12 . . 33.820.87� . . . . . . . . . . . . . . 4185T12 . . . . . 2.48 Up to 9.84� . . . . . . . . 4159T13 . . 36.480.87� . . . . . . . . . . . . . . . . . . . Up to 16.14� . . . . . . . . 4159T14 . . 44.50
Seal Protectors and Rod Bellows
Seal Protector
Rod Bellows
We’ve coupled our most popular gas springs with the most versatile fittings: ball-joint fittings consisting of a ball socket and ball stud that rotate in any direction to compensate for misalignment. The ball-joint fittings can be easily removed. The ball diameter is 10 mm. All gas springs have a rubber seal. To Order : Please specify force from those available below. If you don’t see the exact force you need, round up to the closest available force.
Steel—The cylinder, piston rod, ball socket, and stud are all made of steel. Temperature range is –30° to +180° F.
Type 316 Stainless Steel—The choice for corrosion resistance. The cylinder and piston rod are Type 316 stainless steel, the ball socket is nylon, and the stud is 300 series stainless steel. Temperature range is –10° to +180° F.
Extend. Lg. (A)
Comp. Lg. (B)
Stroke Lg. (C) Available Force, lbs.
Rod Dia. (D)
Cylinder Dia. (E)
Ball Stud Lg. (F)
Thread Lg. (G)
Ball Stud Thread Size
Rod and End Thread Size
Steel 7.01� . . . . 5.04� . . . 1.97� . . . 15, 20, 40, 60, 90 . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.31� . . . . . . 0.75� . . . . . . . 1� . . . . . . . . . . . . . . 0.55� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4138T51 . . . . $14.25 7.4� . . . . . . 5.04� . . . 2.36� . . . 15, 20, 30, 40, 50, 60, 80 . . . . . . . . . . . . . . . 0.24� . . . . . . 0.59� . . . . . . . 1� . . . . . . . . . . . . . . 0.55� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4138T52 . . . . 14.25 9.65� . . . . 6.1� . . . . . 3.54� . . . 15, 20, 30, 40, 50, 60, 80 . . . . . . . . . . . . . . . 0.24� . . . . . . 0.59� . . . . . . . 1� . . . . . . . . . . . . . . 0.55� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4138T53 . . . . 14.2512.2� . . . . . . 8.27� . . . 3.94� . . . 15, 20, 30, 40, 50, 60, 90, 120 . . . . . . 0.31� . . . . . . 0.75� . . . . . . . 1� . . . . . . . . . . . . . . 0.55� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4138T54 . . . . 14.2515.24� . . . . 9.76� . . . 5.47� . . . 15, 20, 30, 40, 50, 60, 90, 120 . . . . . . 0.31� . . . . . . 0.75� . . . . . . . 1� . . . . . . . . . . . . . . 0.55� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4138T55 . . . . 14.2517.13� . . . . 10.83� . . . 6.3� . . . . . 15, 20, 30, 40, 50, 60, 90, 120 . . . . . . 0.31� . . . . . . 0.75� . . . . . . . 1� . . . . . . . . . . . . . . 0.55� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4138T56 . . . . 14.2519.72� . . . . 11.85� . . . 7.87� . . . 15, 20, 30, 40, 50, 60, 90, 120 . . . . . . 0.31� . . . . . . 0.75� . . . . . . . 1� . . . . . . . . . . . . . . 0.55� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4138T57 . . . . 14.2520.12� . . . . 11.85� . . . 8.27� . . . 15, 20, 30, 40, 50, 60, 90, 120 . . . . . . 0.31� . . . . . . 0.75� . . . . . . . 1� . . . . . . . . . . . . . . 0.55� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4138T58 . . . . 14.2527.87� . . . . 17.64� . . . 10.24� . . . 50, 100, 150, 200, 250 . . . . . . . . . . . . . . . . . . . 0.39� . . . . . . 0.87� . . . . . . . 1� . . . . . . . . . . . . . . 0.55� . . . . . . 5/16�-18 . . . . . . . . . M8 . . . . . . . . . . . . . . . . 4138T61 . . . . 20.4129.49� . . . . 16.69� . . . 12.8� . . . . . 50, 100, 150, 200, 250 . . . . . . . . . . . . . . . . . . . 0.39� . . . . . . 0.87� . . . . . . . 1� . . . . . . . . . . . . . . 0.55� . . . . . . 5/16�-18 . . . . . . . . . M8 . . . . . . . . . . . . . . . . 4138T62 . . . . 20.4135.43� . . . . 19.29� . . . 16.14� . . . 50, 100, 150, 200, 250 . . . . . . . . . . . . . . . . . . . 0.39� . . . . . . 0.87� . . . . . . . 1� . . . . . . . . . . . . . . 0.55� . . . . . . 5/16�-18 . . . . . . . . . M8 . . . . . . . . . . . . . . . . 4138T63 . . . . 20.41Type 316 Stainless Steel 7.42� . . . . 5.17� . . . 2.25� . . . 10, 20, 30, 45, 55, 70, 80, 90 . . . . . . . . 0.25� . . . . . . 0.63� . . . . . . . 1.06� . . . . . . . . . 0.54� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4155T101 . . 57.4110� . . . . . . . . . 7� . . . . . . . . 3� . . . . . . . . 10, 20, 30, 45, 55, 70, 80, 90 . . . . . . . . 0.25� . . . . . . 0.63� . . . . . . . 1.06� . . . . . . . . . 0.54� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4155T201 . . 60.3412� . . . . . . . . . 8� . . . . . . . . 4� . . . . . . . . 10, 20, 30, 45, 55, 70, 80, 90 . . . . . . . . 0.25� . . . . . . 0.63� . . . . . . . 1.06� . . . . . . . . . 0.54� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4155T301 . . 63.4715� . . . . . . . . . 9� . . . . . . . . 6� . . . . . . . . 10, 20, 30, 40, 50, 60, 70, 80, 90 . . 0.25� . . . . . . 0.63� . . . . . . . 1.06� . . . . . . . . . 0.54� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4155T501 . . 70.9217� . . . . . . . . . 10� . . . . . . . . 7� . . . . . . . . 10, 20, 30, 40, 50, 60, 70, 80, 90 . . 0.25� . . . . . . 0.63� . . . . . . . 1.06� . . . . . . . . . 0.54� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4155T601 . . 75.6420� . . . . . . . . . 12� . . . . . . . . 8� . . . . . . . . 10, 20, 30, 40, 50, 60, 70, 80, 90 . . 0.25� . . . . . . 0.63� . . . . . . . 1.06� . . . . . . . . . 0.54� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4155T701 . . 72.7823� . . . . . . . . . 13.3� . . . . . 9.7� . . . . . 20, 40, 60, 80, 100, 120, 140 . . . . . . . . 0.31� . . . . . . 0.75� . . . . . . . 1.06� . . . . . . . . . 0.54� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4155T801 . . 74.0226.2� . . . . . . 15� . . . . . . . . 11.2� . . . . . 20, 40, 60, 80, 100, 120, 140 . . . . . . . . 0.31� . . . . . . 0.75� . . . . . . . 1.06� . . . . . . . . . 0.54� . . . . . . 5/16�-18 . . . . . . . . . M6 . . . . . . . . . . . . . . . . 4155T901 . . 75.60
FG
Shown with Fittings Removed
EndThread
RodThread
Shown with Removable Fittings Attached
E D
AB C
Gas Springs with Ball-Joint Fittings
Pair an eyelet fitting and eyelet mounting bracket (each sold separately below) to mount your gas spring, unless noted. Eyelet fittings with a 0.39� eyelet dia. require a bolt or pin (not included) to mount a gas spring. Your bolt or pin must be compatible with the 0.39� eyelet dia. Eyelet mount-ing brackets have 0.24� dia. mounting holes for attaching to a lid, wall, or other surface. Fasteners for attaching brackets are not included.
Need to mount your gas spring? We offer an array of fittings, mounting studs, and mounting brackets to meet your requirements. You can use the same or two different style fittings on each end of your gas spring. Be sure to match the rod and end thread size of your gas spring to the thread size of the fittings. The fittings will increase your gas spring’s extended and compressed lengths, so add the (A) value for each fitting you attach.
MaterialEyelet Dia. (A) (B)
Eyelet Thick.
For M6 Threaded Gas SpringsNylon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.32� . . . . 0.83� . . . 0.44� . . . 0.39� . . . 6465K26 . . . . $1.43Zinc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.32� . . . . 1.1� . . . . . 0.31� . . . 0.19� . . . 9416K84 . . . . 1.41Zinc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.39� . . . . 0.83� . . . 0.39� . . . 0.39� . . . 6465K61 . . . . 2.40Type 316 Stain. Steel . . 0.24� . . . . 0.69� . . . 0.2� . . . . . 0.24� . . . 9424K14 . . . . 9.30For M8 Threaded Gas SpringsZinc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.32� . . . . 0.83� . . . 0.39� . . . 0.39� . . . 6465K63 . . . . 2.25Zinc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.32� . . . . 1.1� . . . . . 0.31� . . . 0.19� . . . 9416K88 . . . . 1.55Zinc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.39� . . . . 0.83� . . . 0.39� . . . 0.39� . . . 6465K27 . . . . 1.86Aluminum . . . . . . . . . . . . . . . . . . . . . 0.32� . . . . 0.79� . . . 0.32� . . . 0.39� . . . 9428K3 . . . . . . 5.64Type 316 Stain. Steel . . 0.32� . . . . 0.84� . . . 0.28� . . . 0.35� . . . 9424K15 . . . . 15.30For M10 Threaded Gas SpringsAluminum . . . . . . . . . . . . . . . . . . . . . 0.32� . . . . 1.38� . . . 0.39� . . . 0.39� . . . 9416K666 . . 8.76Type 316 Stain. Steel . . 0.32� . . . . 1.18� . . . 0.32� . . . 0.39� . . . 9424K16 . . . . 17.51
EYELET FITTINGS
Eyelet Fittings and Mounting Brackets
A B
Gas-Spring End Fittings and Brackets (Continued from previous page)
0.87˝
0.59˝
0.94˝
0.24˝
1.26˝1.77˝
2.95˝
3.78˝
0.69˝
0.51˝
1.02˝
ForEyelet Dia. Thick. Zinc-Plated Steel Stainless Steel
14 . . . . 0.32� . . . . . . . . . . . . . . 0.12� . . . . . 9416K25� . . . . . $5.89 4167T11� . . . . $21.4215 . . . . 0.32� . . . . . . . . . . . . . . 0.12� . . . . . 9416K26� . . . . . 5.89 4167T12� . . . . 21.4216 . . . . 0.24� . . . . . . . . . . . . . . 0.08� . . . . . 9416K27 . . . . . . . . . 6.06 4167T13 . . . . . . 18.8916 . . . . 0.32� . . . . . . . . . . . . . . 0.08� . . . . . 9416K29 . . . . . . . . . 6.68 . . . . . .
16
15 1.73˝ 1.26˝
1.77˝
0.58˝
0.49˝ 0.24˝
14
� Includes end caps. � Includes retaining clips.
EYELET MOUNTING BRACKETS
1189
Gas SpringsFor information about gas springs, see page 1186.
Reduce damage to equipment—an external sleeve and spring-loaded knob automatically lock these springs in their fully extended position. To release, pull the knob. Note: When using two gas springs in a locking application, use one locking spring and one nonlocking spring.
All of these gas springs come with the most versatile fittings: ball-joint fittings consisting of a ball socket and ball stud that rotate 360° to compensate for mis-alignment. The ball-joint fittings can be easily removed. The ball diameter is 10 mm.
The cylinder, piston rod, ball socket, and stud are steel. The seal is rubber. Temperature range is –30° to +180° F. To Order : Please specify force from those available below. If you don’t see the exact force you need, round up to the closest available force. Extend.Lg. (A)
Comp.Lg. (B)
StrokeLg. (C) Available Force, lbs.
RodDia. (D)
CylinderDia. (E)
SleeveDia. (F)
Ball StudThread Size
Rod and EndThread Size
12.2� . . . . . . . . . 8.46�. . . . . . 3.74� . . . . . . . 15, 20, 30, 40, 50, 60, 90, 120 . . . . . . 0.31� . . . . . . . . 0.75� . . . . . . . . . . 0.85� . . . . . . . . . 5/16�-18. . . . . . . . . . . M6 . . . . . . . . . . . . . . . . . . . 9425K11 . . $49.8815.24�. . . . . . . 9.96�. . . . . . 5.28� . . . . . . . 15, 20, 30, 40, 50, 60, 90, 120 . . . . . . 0.31� . . . . . . . . 0.75� . . . . . . . . . . 0.85� . . . . . . . . . 5/16�-18. . . . . . . . . . . M6 . . . . . . . . . . . . . . . . . . . 9425K12 . . 52.0417.13�. . . . . . . 11.02�. . . . . . 6.1� . . . . . . . . . 15, 20, 30, 40, 50, 60, 90, 120 . . . . . . 0.31� . . . . . . . . 0.75� . . . . . . . . . . 0.85� . . . . . . . . . 5/16�-18. . . . . . . . . . . M6 . . . . . . . . . . . . . . . . . . . 9425K13 . . 54.4119.72�. . . . . . . 12.05�. . . . . . 7.68� . . . . . . . 15, 20, 30, 40, 50, 60, 90, 120 . . . . . . 0.31� . . . . . . . . 0.75� . . . . . . . . . . 0.85� . . . . . . . . . 5/16�-18. . . . . . . . . . . M6 . . . . . . . . . . . . . . . . . . . 9425K14 . . 57.00
Shown with Removable Fittings AttachedFE
BA
C
D
1˝ 0.55˝
Locking Gas Springs with Ball-Joint Fittings
Built tough, these gas springs last longer and endure more cycles than other gas springs. Corrosion resistance from their all-stainless steel construction adds to their durability. Great for food, pharmaceutical, medical, and marine applications.
All of these gas springs come with the most versatile fittings: ball-joint fittings con-sisting of a ball socket and ball stud that rotate 360° to compensate for misalignment. The ball-joint fittings can be easily removed. The ball diameter is 8 mm for 9517T2 and 9517T3; 13 mm for all others.
The cylinder and piston rod are Type 316L stainless steel. The ball socket and stud are Type 304 stainless steel. The seal is rubber and contains USDA food-grade oil. Temperature range is –5° to +158° F. To Order : Please specify force from those available below. If you don’t see the exact force you need, round up to the closest available force.Extend.Lg. (A)
Comp.Lg. (B)
StrokeLg. (C) Available Force, lbs.
RodDia. (D)
CylinderDia. (E)
Ball Stud Lg. (F)
Thread Lg. (G)
Ball StudThread Size
Rod and EndThread Size
12.13�..... 8.13�.... 4� ........10, 20, 30, 40, 50, 60, 70, 80, 90 ................ 0.24� ....... 0.59� .........0.75� .......... 0.37� ...... M5................... M6................... 9517T2 ... $111.7416.07�..... 10.07�.... 6� ........10, 20, 30, 40, 50, 60, 70, 80, 90 ................ 0.24� ....... 0.59� .........0.75� .......... 0.37� ...... M5................... M6................... 9517T3 ... 117.6820.9� ....... 12.9� ...... 8� ........25, 30, 40, 50, 60, 70, 80, 100, 120, 135 .. 0.32� ....... 0.71� .........1.16� .......... 0.65� ...... M8................... M8................... 9517T4 ... 139.4424.92�..... 14.92�.... 10� ........25, 30, 40, 50, 60, 70, 80, 100, 120, 135 .. 0.32� ....... 0.71� .........1.16� .......... 0.65� ...... M8................... M8................... 9517T5 ... 148.9529.09�..... 17.09�.... 12� ........35, 50, 75, 100, 125, 150, 175, 200, 250 .. 0.39� ....... 0.91� .........1.16� .......... 0.65� ...... M8................... M10 ................ 9517T6 ... 190.2237.08�..... 21.08�.... 16� ........35, 50, 75, 100, 125, 150, 175, 200, 250 .. 0.39� ....... 0.91� .........1.16� .......... 0.65� ...... M8................... M10 ................ 9517T7 ... 211.50
Shown with Removable Fittings Attached
BA
C
EDF
G
Extended-Service Stainless Steel Gas Springs with Ball-Joint Fittings
A special composite seal allows these gas springs to tolerate temperatures from –4° to +392° F. All come with the most versatile fittings: ball-joint fittings consisting of a ball socket and ball stud that rotate 360° to compensate for misalignment. The ball-joint fittings can be easily removed. The ball diameter is 10 mm.
The cylinder, piston rod, ball socket, and stud are all made of steel. To Order : Please specify force from those available below. If you don’t see the exact force you need, round up to the closest available force.
Extend.Lg. (A)
Comp.Lg. (B)
StrokeLg. (C) Available Force, lbs.
RodDia. (D)
CylinderDia. (E)
Ball StudThread Size
Rod and EndThread Size
11.61�. . . . . . . . 7.67�. . . . . . . 3.94� . . . . . . . . 15, 20, 30, 40, 60, 70, 80, 90, 120 . . . . . . . . . 0.32� . . . . . . . . . 0.75� . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . . 9646T61 . . $58.0014.76�. . . . . . . . 9.25�. . . . . . . 5.51� . . . . . . . . 15, 20, 30, 40, 60, 70, 80, 90, 120 . . . . . . . . . 0.32� . . . . . . . . . 0.75� . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . . 9646T62 . . 61.0016.34�. . . . . . . . 10.04�. . . . . . . 6.3� . . . . . . . . . . 15, 20, 30, 40, 60, 70, 80, 90, 120 . . . . . . . . . 0.32� . . . . . . . . . 0.75� . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . . 9646T63 . . 61.4019.49�. . . . . . . . 11.62�. . . . . . . 7.87� . . . . . . . . 15, 20, 30, 40, 60, 70, 80, 90, 120 . . . . . . . . . 0.32� . . . . . . . . . 0.75� . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . . 9646T64 . . 63.4319.88�. . . . . . . . 11.61�. . . . . . . 8.27� . . . . . . . . 15, 20, 30, 40, 60, 70, 80, 90, 120 . . . . . . . . . 0.32� . . . . . . . . . 0.75� . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . . 9646T65 . . 63.56
Shown with Removable Fittings Attached
BA
C
ED
0.98˝0.51˝
Extreme-Temperature Gas Springs with Ball-Joint Fittings
Their tiny size and low force output make these gas springs the choice for small lids and doors in confined spaces, such as small toolboxes and access panels. All gas springs have a rubber seal and come with an eye-let fitting on each end. The rod-end eyelet fitting is removable and the rod thread size is M4. Temperature range is –5° to +158° F. To Order : Please specify force from those available below. If you don’t see the exact force you need, round up to the closest available force.
Steel Gas Springs—The cylinder and piston rod are steel. Eyelet fittings are aluminum.
Type 316L Stainless Steel Gas Springs—The cylinder, piston rod, and eyelet fittings are Type 316L stainless steel for corrosion resistance.
Mounting Brackets—To mount your gas spring, use a mounting bracket (sold separately below). They have mounting holes for attach-ing to a lid, wall, or other surface. Fasteners for attaching brackets are not included. Style 1 includes a retaining ring.
Gas Springs
Extend.Lg. (A)
Comp.Lg. (B)
StrokeLg. (C)
AvailableForce, lbs.
RodDia. (D)
CylinderDia. (E) Steel
Type 316L Stainless Steel
4.33� . . . . . . . 3.33� . . . . . . 1� . . . . . . . . . . . . . 5, 10, 15, 20, 25, 30 ... . 0.16� . . . 0.47� . . . . . . 9417K1 . . . . $37.78 4170T1 . . . . . . $68.105.11� . . . . . . . 3.61� . . . . . . 1.5�. . . . . . . . . . 5, 10, 15, 20, 25, 30 ... . 0.16� . . . 0.47� . . . . . . 9417K2 . . . . 38.00 4170T2 . . . . . . 69.006.29� . . . . . . . 4.29� . . . . . . 2� . . . . . . . . . . . . . 5, 10, 15, 20, 25, 30 ... . 0.16� . . . 0.47� . . . . . . 9417K3 . . . . 38.44 4170T3 . . . . . . 70.007.08� . . . . . . . 4.58� . . . . . . 2.5�. . . . . . . . . . 5, 10, 15, 20, 25, 30 ... . 0.16� . . . 0.47� . . . . . . 9417K4 . . . . 38.78 4170T4 . . . . . . 71.008.26� . . . . . . . 5.26� . . . . . . 3� . . . . . . . . . . . . . 5, 10, 15, 20, 25, 30 ... . 0.16� . . . 0.47� . . . . . . 9417K5 . . . . 39.22 4170T5 . . . . . . 72.209.05� . . . . . . . 5.55� . . . . . . 3.5�. . . . . . . . . . 5, 10, 15, 20, 25, 30 ... . 0.16� . . . 0.47� . . . . . . 9417K6 . . . . 39.56 4170T6 . . . . . . 73.30
Gas Spring Shown with Rod-End Fitting Removed
RodThread
Gas Spring Shown with Removable Rod-End Fitting Attached
ED
ABC
0.16˝ 0.16˝
Miniature Gas Springs with Eyelet Fittings
For Eyelet Dia. Thick.
Zinc-Plated Steel1 . . . . 0.16� . . . . . 0.12� . . 9417K91 . . $14.692 . . . . 0.16� . . . . . 0.08� . . 9417K92 . . 12.32Type 316 Stainless Steel1 . . . . 0.16� . . . . . 0.12� . . 4170T91 . . 25.942 . . . . 0.16� . . . . . 0.08� . . 4170T92 . . 21.27
Mounting Brackets
3˝3.78˝
0.69˝
0.51˝ 0.26˝Dia.
1.02˝
1.73˝1.26˝1.77˝ 0.24˝ Dia.
0.34˝
0.49˝0.24˝
Style 2 Mounting Bracket
Style 1 Mounting Bracket
1190
Gas SpringsFor information about gas springs, see page 1186.
Just use the included hex key to open the hex socket and bleed off the gas—no disassembly required. All of these gas springs come with the most versatile fittings: ball-joint fittings consisting of a ball socket and ball stud that rotate 360° to compensate for misalignment. The ball-joint fittings can be easily removed.
The cylinder and piston rod are made of steel. The seal is rubber.
Temperature range is –40° to +212° F.Locking Gas Springs—Reduce damage to equipment—an external
sleeve automatically locks these springs in their fully extended position. To release, pull the sleeve. Note: When using two gas springs in a locking application, use one locking spring and one nonlocking spring.
Not sure what force you need? A bleed-off valve allows you to release gas to permanently reduce the force. All gas springs come charged to their maximum force.
Note: Release gas in very small increments and then test your application. Once gas is released, the force is permanently reduced. Steel Gas Springs with Ball-Joint Fittings
� Extend. Lg. (A) is 24.6�; Comp. Lg. (B) is 14.76�. � Extend. Lg. (A) is 28.54�; Comp. Lg. (B) is 16.73�. • Extend. Lg. (A) is 36.42�; Comp. Lg. (B) is 20.67�; Stroke Lg. (C) is 15.75�. � Rod and end thread size is M8.
Extend.Lg. (A)
Comp.Lg. (B)
StrokeLg. (C)
CylinderDia. (E)
Ball StudLg. (F)
ThreadLg. (G)
Ball StudThreadSize
BallDia.
Rod andEndThread Size
Nonlocking Locking RodDia. (D)
SleeveDia. (D)
90 lbs. Max. Force 7.72� . . . . . 5.36� . . . . 2.36� . . . . . 0.59� . . . . . . . . . 0.96� . . . . . . . . . . 0.49� . . . . . . 5/16�-18 ... . . 10 mm ... M6 ... . . . . . . . . . . . . . . . . 0.24� . . . 6465K1 . . . . $43.05 ... . . . .
10.87� . . . . . 6.93� . . . . 3.94� . . . . . 0.59� . . . . . . . . . 0.96� . . . . . . . . . . 0.49� . . . . . . 5/16�-18 ... . . 10 mm ... M6 ... . . . . . . . . . . . . . . . . 0.24� . . . 6465K2 . . . . 43.63 ... . . . .
14.8� . . . . . . . 8.9� . . . . . . 5.9� . . . . . . . 0.59� . . . . . . . . . 0.96� . . . . . . . . . . 0.49� . . . . . . 5/16�-18 ... . . 10 mm ... M6 ... . . . . . . . . . . . . . . . . 0.24� . . . 6465K91 . . 44.27 ... . . . .
18.74� . . . . . 10.87� . . . . 7.87� . . . . . 0.59� . . . . . . . . . 0.96� . . . . . . . . . . 0.49� . . . . . . 5/16�-18 ... . . 10 mm ... M6 ... . . . . . . . . . . . . . . . . 0.24� . . . 6465K92 . . 44.67 ... . . . .
146 lbs. Max. Force11.81� . . . . . 7.87� . . . . 3.94� . . . . . 0.71� . . . . . . . . . 0.96� . . . . . . . . . . 0.49� . . . . . . 5/16�-18 ... . . 10 mm ... M6 ... . . . . . . . . . . . . . . . . 0.32� . . . 6465K3 . . . . 46.74 1.38� . . . 65145K63 . . . . $71.9515.75� . . . . . 9.84� . . . . 5.91� . . . . . 0.71� . . . . . . . . . 0.96� . . . . . . . . . . 0.49� . . . . . . 5/16�-18 ... . . 10 mm ... M6 ... . . . . . . . . . . . . . . . . 0.32� . . . 6465K4 . . . . 47.56 0.87� . . . 65145K64 . . . . 73.2519.68� . . . . . 11.81� . . . . 7.87� . . . . . 0.71� . . . . . . . . . 0.96� . . . . . . . . . . 0.49� . . . . . . 5/16�-18 ... . . 10 mm ... M6 ... . . . . . . . . . . . . . . . . 0.32� . . . 6465K5 . . . . 48.32 0.87� . . . 65145K65 . . . . 74.6023.62� . . . . . 13.78� . . . . 9.84� . . . . . 0.71� . . . . . . . . . 0.96� . . . . . . . . . . 0.49� . . . . . . 5/16�-18 ... . . 10 mm ... M6 ... . . . . . . . . . . . . . . . . 0.32� . . . 6465K21 . . 50.26 0.87� . . . 65145K91 . . . . 76.4027.56� . . . . . 15.75 � . . . . 11.81� . . . . . 0.71� . . . . . . . . . 0.96� . . . . . . . . . . 0.49� . . . . . . 5/16�-18 ... . . 10 mm ... M6 ... . . . . . . . . . . . . . . . . 0.32� . . . 6465K22 . . 52.62 0.87� . . . 65145K92 . . . . 79.82270 lbs. Max. Force12.8� . . . . . . . 8.86� . . . . 3.94� . . . . . 0.91� . . . . . . . . . 1.16� . . . . . . . . . . 0.65� . . . . . . 5/16�-18 ... . . 13 mm ... M8 ... . . . . . . . . . . . . . . . . 0.39� . . . 6465K93 . . 52.33 1.1�. . . . . . 65145K83 . . . . 73.2216.73� . . . . . 10.83� . . . . 5.9� . . . . . . . 0.91� . . . . . . . . . 1.16� . . . . . . . . . . 0.65� . . . . . . 5/16�-18 ... . . 13 mm ... M8 ... . . . . . . . . . . . . . . . . 0.39� . . . 6465K94 . . 56.51 1.1�. . . . . . 65145K84 . . . . 73.1319.88� . . . . . 12.01� . . . . 7.87� . . . . . 0.91� . . . . . . . . . 1.16� . . . . . . . . . . 0.65� . . . . . . 5/16�-18 ... . . 13 mm ... M8 ... . . . . . . . . . . . . . . . . 0.39� . . . 6465K23 . . 52.78 1.1�. . . . . . 65145K93 . . . . 77.0023.82� . . . . . 13.98� . . . . 9.84� . . . . . 0.91� . . . . . . . . . 1.16� . . . . . . . . . . 0.65� . . . . . . 5/16�-18 ... . . 13 mm ... M8 ... . . . . . . . . . . . . . . . . 0.39� . . . 6465K6 . . . . 53.16 1.1�. . . . . . 65145K66� 77.6527.76� . . . . . 15.94� . . . . 11.82� . . . . . 0.91� . . . . . . . . . 1.16� . . . . . . . . . . 0.65� . . . . . . 5/16�-18 ... . . 13 mm ... M8 ... . . . . . . . . . . . . . . . . 0.39� . . . 6465K7 . . . . 53.98 1.1�. . . . . . 65145K67� 87.1636.02� . . . . . 20.28� . . . . 15.74� . . . . . 0.91� . . . . . . . . . 1.16� . . . . . . . . . . 0.65� . . . . . . 5/16�-18 ... . . 13 mm ... M8 ... . . . . . . . . . . . . . . . . 0.39� . . . 6465K95 . . 56.22 1.1�. . . . . . 65145K85• 90.56562 lbs. Max. Force13.78� . . . . . 9.84� . . . . 3.94� . . . . . 1.1�. . . . . . . . . . . . 1.42� . . . . . . . . . . 0.79� . . . . . . M10 ... . . . . . . . 16 mm ... M10 ... . . . . . . . . . . . . . 0.55� . . . 6465K96 . . 129.49 ... . . . .
21.65� . . . . . 13.78� . . . . 7.87� . . . . . 1.1�. . . . . . . . . . . . 1.42� . . . . . . . . . . 0.79� . . . . . . M10 ... . . . . . . . 16 mm ... M10 ... . . . . . . . . . . . . . 0.55� . . . 6465K97 . . 133.22 1.38� . . . 65145K87� 198.3629.53� . . . . . 17.72� . . . . 11.81� . . . . . 1.1�. . . . . . . . . . . . 1.42� . . . . . . . . . . 0.79� . . . . . . M10 ... . . . . . . . 16 mm ... M10 ... . . . . . . . . . . . . . 0.55� . . . 6465K24 . . 136.62 1.38� . . . 65145K94 . . . . 182.0337.4� . . . . . . . 21.65� . . . . 15.75� . . . . . 1.1�. . . . . . . . . . . . 1.42� . . . . . . . . . . 0.79� . . . . . . M10 ... . . . . . . . 16 mm ... M10 ... . . . . . . . . . . . . . 0.55� . . . 6465K8 . . . . 126.28 1.38� . . . 65145K68 . . . . 205.2045.28� . . . . . 25.59� . . . . 19.69� . . . . . 1.1�. . . . . . . . . . . . 1.42� . . . . . . . . . . 0.79� . . . . . . M10 ... . . . . . . . 16 mm ... M10 ... . . . . . . . . . . . . . 0.55� . . . 6465K98 . . 142.69 1.38� . . . 65145K88 . . . . 219.22
Nonlocking Shown with Removable Fittings Attached
AB C
E DF
G
Locking Shown with Removable Fittings Attached
DE
CBA
Reducible-Force Gas Springs with Fittings
The choice for corrosive environments, these gas springs have a Type 316 stainless steel cylin-der and piston rod. They also have a rubber seal and come with an eyelet fitting on each end. You can easily remove the eyelet fittings. Temperature range is –40° to +300° F.
All gas springs have a bleed-off valve to release the gas. Note: You will have to remove the end fitting to access the bleed-off valve.
Rod Protectors—Slip one of these protectors over the gas-spring rod and under the eyelet fitting to protect the rod from debris and minimize damage to the seal. All are made of Type 316 stainless steel. The 240-lb. models are 1� dia.; 500-lb. models are 1.25� dia.
Regulator Kit—Once you release gas from your gas spring, you can’t go back. Attaching a kit lets you monitor how much gas you are releasing as you do it. Each kit contains a pressure gauge, manifold, and bronze fittings.
Mounting Brackets—To mount your gas spring, use a mounting bracket. They’re made of stainless steel and have mounting holes for attaching to a lid, wall, or other surface. Fasteners for attaching brackets are not included.
Gas Spring Shown with Rod Protector
GAS SPRINGS, ROD PROTECTORS, AND REGULATOR KITS Extend.Lg. (A)
Comp.Lg. (B)
StrokeLg. (C)
RodDia. (D)
CylinderDia. (E) (F) (G) Gas Springs Rod Protectors
240 lbs. Max. Force Gas Springs—Rod and End Thread Size: M8. 8.25�..... 6.25�.... 2� ......... 0.38� .......0.88� ....... 0.39� ..0.38� .. 6626K54 .. $88.05 9419K71 ..$24.0012.25�..... 8.25�.... 4� ......... 0.38� .......0.88� ....... 0.39� ..0.38� .. 6626K55 .. 92.48 9419K72 .. 24.8016.25�..... 10.25�.... 6� ......... 0.38� .......0.88� ....... 0.39� ..0.38� .. 6626K56 .. 94.27 9419K73 .. 26.0020.25�..... 12.25�.... 8� ......... 0.38� .......0.88� ....... 0.39� ..0.38� .. 6626K57 .. 99.64 9419K74 .. 27.2024.25�..... 14.25�.... 10� ......... 0.38� .......0.88� ....... 0.39� ..0.38� .. 6626K58 .. 101.43 9419K75 .. 28.1428.25�..... 16.25�.... 12� ......... 0.38� .......0.88� ....... 0.39� ..0.38� .. 6626K59 .. 106.20 9419K76 .. 29.6032.25�..... 18.25�.... 14� ......... 0.38� .......0.88� ....... 0.39� ..0.38� .. 6626K61 .. 110.20 9419K77 .. 30.6636.25�..... 20.25�.... 16� ......... 0.38� .......0.88� ....... 0.39� ..0.38� .. 6626K62 .. 114.07 9419K78 .. 30.54
500 lbs. Max. Force Gas Springs—Rod and End Thread Size: M10.10.5� ....... 8.5� ...... 2� ......... 0.56� .......1.17� ....... 0.39� ..0.5� .... 6626K71 .. 117.52 9419K81 .. 34.1414.5� ....... 10.5� ...... 4� ......... 0.56� .......1.17� ....... 0.39� ..0.5� .... 6626K72 .. 123.71 9419K82 .. 35.2418.5� ....... 12.5� ...... 6� ......... 0.56� .......1.17� ....... 0.39� ..0.5� .... 6626K73 .. 136.07 9419K83 .. 36.4122.5� ....... 14.5� ...... 8� ......... 0.56� .......1.17� ....... 0.39� ..0.5� .... 6626K74 .. 141.20 9419K84 .. 39.4826.5� ....... 16.5� ...... 10� ......... 0.56� .......1.17� ....... 0.39� ..0.5� .... 6626K75 .. 146.55 9419K85 .. 41.9430.5� ....... 18.5� ...... 12� ......... 0.56� .......1.17� ....... 0.39� ..0.5� .... 6626K76 .. 153.37 9419K86 .. 43.6438.5� ....... 22.5� ...... 16� ......... 0.56� .......1.17� ....... 0.39� ..0.5� .... 6626K77 .. 169.20 9419K88 .. 47.0846.5� ....... 26.5� ...... 20� ......... 0.56� .......1.17� ....... 0.39� ..0.5� .... 6626K78 .. 183.97 9419K89 .. 49.9454.5� ....... 30.5� ...... 24� ......... 0.56� .......1.17� ....... 0.39� ..0.5� .... 6626K79 .. 192.95 9419K91 .. 52.80
Stainless Steel Gas Springs with Eyelet Fittings
F G
Gas Spring Shown with Removable Fittings Attached
AB C
E D
Regulator Kit for 500-lb. Max. Force Gas Springs Above ................................. 6626K93 ..... $386.10
Regulator Kit for 240-lb. Max. Force Gas Springs Above .................................6626K92 ..... $386.10
Style 1 Mounting Bracket
1.52˝ 1˝
2.5˝3.5˝
3˝
0.33˝ Dia.
Style 2 Mounting Bracket
0.56˝0.38˝Dia.
2.5˝3.5˝
0.8˝
1.3˝
Mounting Brackets Material For Eyelet Dia. Thick.
1 ........ Type 303 Stainless Steel .............0.39� ................................... 0.25� ..................... 6626K96 .. $24.652 ........ Type 304 Stainless Steel .............0.39� ................................... 0.125�................... 6626K95 .. 10.87
1191
Gas SpringsFor information about gas springs, see page 1186.
When you team one of these gas springs with a release control (each sold sepa-rately) you can lock the gas spring in place and then release it with a push of a button or lever.
Gas Springs—A valve on the rod end interacts with the release control to operate the gas spring. The cylinder end comes with the most versatile fitting: a ball-joint fitting consisting of a ball socket and ball stud that rotate 360° to compensate for misalignment. The ball-joint fitting can be easily removed.
All gas springs have a steel cylinder and piston rod. Seal is rubber. Temperature range is –22° to +176° F. To Order : Please specify force from those available below. If you don’t see the exact force you need, round up to the closest available force.
Release Controls—Have an eyelet connector that threads right onto the threads at the rod end of the gas spring. The eyelet hole diameter is 0.32�. To mount the gas spring with a release control, use an eyelet bracket (not included; see page 1188) for the push-button style control; a bolt or pin for the lever-style control.
Push-button style has a hydraulic cable that lets you actuate the gas spring from a distance (see listing). It has a 1.97� long M16 threaded body for panel mounting.
Lever style has a 5.12� long lever that attaches to either side of its eyelet connector.
Gas Springs—Ball Stud Thread Size: M8. Rod and End Thread Size: M10.Extend.Lg. (A)
Comp.Lg. (B)
StrokeLg. (C)
AvailableForce, lbs.
RodDia. (D)
CylinderDia. (E)
12.2� . . . . . . . . 8.26�. . . . . . 3.94�. . . . . 20, 40, 60, 100 . . . 0.39� . . . . . . . 0.87� . . . . . . . 9833T8. . $89.5215.94�. . . . . . 10.04�. . . . . . 5.9� . . . . . . . 20, 40, 60, 100 . . . 0.39� . . . . . . . 0.87� . . . . . . . 9833T1. . 96.7019.88�. . . . . . 12.01�. . . . . . 7.87�. . . . . 20, 40, 60, 100 . . . 0.39� . . . . . . . 0.87� . . . . . . . 9833T2. . 101.2823.82�. . . . . . 13.82�. . . . . . 10� . . . . . . . . . . 20, 40, 60, 100 . . . 0.39� . . . . . . . 0.87� . . . . . . . 9833T3. . 115.6828.15�. . . . . . 16.15�. . . . . . 12� . . . . . . . . . . 20, 40, 60, 100 . . . 0.39� . . . . . . . 0.87� . . . . . . . 9833T4. . 123.7844.29�. . . . . . 24.29�. . . . . . 20� . . . . . . . . . . 20, 40, 60, 100 . . . 0.39� . . . . . . . 0.87� . . . . . . . 9833T6. . 159.48
Gas Spring
B
ED
CA
1.16˝0.65˝
Remote-Release Gas Springs with Ball-Joint Fitting
Push-Button with 19 11 / 16 � Lg. Cable . . . . . 9684K11 . . $46.47Push-Button with 29 1 / 2 � Lg. Cable . . . . . . . . 9684K12 . . 47.12Push-Button with 39 3 / 8 � Lg. Cable . . . . . . . . 9684K13 . . 47.76Push-Button with 49 7 / 32 � Lg. Cable . . . . . . 9684K14 . . 48.92Push-Button with 59� Lg. Cable . . . . . . . . . . . . 9684K15 . . 49.86Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3739K1 . . . . 30.08
Release Controls
0.32˝Dia.
Lever Release Control
0.32˝Dia.
Push-Button Release Control
Small in size, but not in strength, these gas springs are often used to replace coil springs in metal stamping and die-spring applications. They match the diameter and stroke length of coil die springs, but offer much more force. Compared to other gas springs, they exert high force with short stroke lengths. They can also be mounted with the rod in any position.
All springs have a steel cylinder and piston rod. Seal is polyurethane. A rod scraper protects the seal from debris, prolonging the life of the spring. Temperature range is 32° to 176° F. Color-coded labels help ensure you choose the correct replacement. To Order : Please specify force from those available below. If you don’t see the exact force you need, round up to the closest available force.
Mounting flanges allow panel mounting. They slide onto a groove in the cylinder body and stay in place with included clips. Mounting fasteners are not included. Gas SpringsExtend.Lg. (A)
Comp.Lg. (B)
StrokeLg. (C)
RodDia. (D)
CylinderDia. (E)
Available Force, lbs.: 40 (Green), 81 (Blue), 121 (Red), 164 (Yellow)2.83� . . . . . . . . . 2.24� . . . . . . . . 0.59� . . . . . . . . 0.24� . . . . . . . . . 0.47� . . . . . . . . . 6643K72 . . $47.393.62� . . . . . . . . . 2.64� . . . . . . . . 0.98� . . . . . . . . 0.24� . . . . . . . . . 0.47� . . . . . . . . . 6643K73 . . 46.064.65� . . . . . . . . . 3.15� . . . . . . . . 1.5� . . . . . . . . . . 0.24� . . . . . . . . . 0.47� . . . . . . . . . 6643K74 . . 46.715.59� . . . . . . . . . 3.62� . . . . . . . . 1.97� . . . . . . . . 0.24� . . . . . . . . . 0.47� . . . . . . . . . 6643K45 . . 47.367.95� . . . . . . . . . 4.80� . . . . . . . . 3.15� . . . . . . . . 0.24� . . . . . . . . . 0.47� . . . . . . . . . 6643K46 . . 50.26
Available Force, lbs.: 94 (Green), 157 (Blue), 220 (Red), 292 (Yellow)2.83� . . . . . . . . . 2.24� . . . . . . . . 0.59� . . . . . . . . 0.32� . . . . . . . . . 0.75� . . . . . . . . . 6643K52 . . 49.233.62� . . . . . . . . . 2.64� . . . . . . . . 0.98� . . . . . . . . 0.32� . . . . . . . . . 0.75� . . . . . . . . . 6643K53 . . 48.004.65� . . . . . . . . . 3.15� . . . . . . . . 1.5� . . . . . . . . . . 0.32� . . . . . . . . . 0.75� . . . . . . . . . 6643K54 . . 48.677.95� . . . . . . . . . 4.80� . . . . . . . . 3.15� . . . . . . . . 0.32� . . . . . . . . . 0.75� . . . . . . . . . 6643K56 . . 56.78
Extend.Lg. (A)
Comp.Lg. (B)
StrokeLg. (C)
RodDia. (D)
CylinderDia. (E)
Available Force, lbs.: 173 (Green), 346 (Blue), 519 (Red), 690 (Yellow)2.83� . . . . . . . . 2.24� . . . . . . . . . 0.59� . . . . . . . . 0.47� . . . . . . . . . 1� . . . . . . . . . . . . . 6643K62 . . $58.983.62� . . . . . . . . 2.64� . . . . . . . . . 0.98� . . . . . . . . 0.47� . . . . . . . . . 1� . . . . . . . . . . . . . 6643K63 . . 64.624.65� . . . . . . . . 3.15� . . . . . . . . . 1.5� . . . . . . . . . . 0.47� . . . . . . . . . 1� . . . . . . . . . . . . . 6643K64 . . 67.218.07� . . . . . . . . 4.92� . . . . . . . . . 3.15� . . . . . . . . 0.47� . . . . . . . . . 1� . . . . . . . . . . . . . 6643K66 . . 72.38
DE
CA
B
Miniature High-Force Gas Springs
For CylinderDia. (E)
Lg.(F)
Wd.(G) Thick.
Mount.Hole Dia. (H)
0.47� . . . . . . . . . . . . . . . . . 1.34� . . . . 0.83� . . . 0.35� . . . . . 0.26� . . . . . . . . . . . . . 6643K81 . . $23.880.75� . . . . . . . . . . . . . . . . . 1.77� . . . . 0.98� . . . 0.28� . . . . . 0.28� . . . . . . . . . . . . . 6643K82 . . 26.251� . . . . . . . . . . . . . . . . . . . . . . 1.97� . . . . 1.18� . . . 0.35� . . . . . 0.28� . . . . . . . . . . . . . 6643K83 . . 28.64
Mounting Flanges
Mounting Flange
GHE
F
Also known as tension or traction gas springs, the force on these springs pulls the piston rod inward, operating in the opposite direction of other gas springs. At rest, the spring is compressed; you have to pull to extend it. Great for use on doors and hoods that need to stay shut.
All of these gas springs come with the most versatile fittings: ball-joint fittings consisting of a ball socket and ball stud that rotate in any direction to compensate for misalignment. The ball-joint fittings can be easily removed. The ball diameter is 13 mm.
The cylinder and piston rod are steel. Seal is rubber. Temperature range is –22° to +176° F. To Order : Please specify force from those available below. If you don’t see the exact force you need, round up to the closest available force.
Compact Gas Springs—Offer shorter compressed and extended lengths without sacrific-ing stroke length.
Extend.Lg. (A)
Comp.Lg. (B)
StrokeLg. (C) Available Force, lbs.
RodDia. (D)
CylinderDia. (E)
Ball StudThread Size
Rod and EndThread Size
Standard16.91�. . . . . . . 12.91�. . . . . . 4� . . . . . . . . . . . 20, 30, 45, 56, 80, 101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.32� . . . . . . . . . 0.86� . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . 9499T1. . . . . $78.7428.5� . . . . . . . . . 20.63�. . . . . . 7.87�. . . . . . 20, 30, 45, 56, 80, 101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.32� . . . . . . . . . 0.86� . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . 9499T2. . . . . 99.74Compact10.04�. . . . . . . 8.07�. . . . . . 1.97�. . . . . . 20, 30, 40, 60, 80, 100, 150, 200, 250 . . . . . 0.39� . . . . . . . . . 1.1� . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . M10 . . . . . . . . . . . . . . . . . 9502T1. . . . . 93.8212.01�. . . . . . . 9.06�. . . . . . 2.95�. . . . . . 20, 30, 40, 60, 80, 100, 150, 200, 250 . . . . . 0.39� . . . . . . . . . 1.1� . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . M10 . . . . . . . . . . . . . . . . . 9502T2. . . . . 101.6613.98�. . . . . . . 10.04�. . . . . . 3.94�. . . . . . 20, 30, 40, 60, 80, 100, 150, 200, 250 . . . . . 0.39� . . . . . . . . . 1.1� . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . M10 . . . . . . . . . . . . . . . . . 9502T3. . . . . 108.2415.94�. . . . . . . 11.02�. . . . . . 4.92�. . . . . . 20, 30, 40, 60, 80, 100, 150, 200, 250 . . . . . 0.39� . . . . . . . . . 1.1� . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . M10 . . . . . . . . . . . . . . . . . 9502T4. . . . . 116.0617.91�. . . . . . . 12.01�. . . . . . 5.9� . . . . . . . . 20, 30, 40, 60, 80, 100, 150, 200, 250 . . . . . 0.39� . . . . . . . . . 1.1� . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . M10 . . . . . . . . . . . . . . . . . 9502T5. . . . . 119.8821.85�. . . . . . . 13.98�. . . . . . 7.87�. . . . . . 20, 30, 40, 60, 80, 100, 150, 200, 250 . . . . . 0.39� . . . . . . . . . 1.1� . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . M10 . . . . . . . . . . . . . . . . . 9502T6. . . . . 123.4026.18�. . . . . . . 16.14�. . . . . . 10.04�. . . . . . 20, 30, 40, 60, 80, 100, 150, 200, 250 . . . . . 0.39� . . . . . . . . . 1.1� . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . M10 . . . . . . . . . . . . . . . . . 9502T7. . . . . 144.8830.11�. . . . . . . 18.11�. . . . . . 12� . . . . . . . . . . . 20, 30, 40, 60, 80, 100, 150, 200, 250 . . . . . 0.39� . . . . . . . . . 1.1� . . . . . . . . . . . . . M8 . . . . . . . . . . . . . . . . . . . M10 . . . . . . . . . . . . . . . . . 9502T8. . . . . 156.02
1.16˝0.65˝
Gas Spring Shown with Removable Fittings
Attached
B
ED
CA
Close-Assist Gas Springs with Ball-Joint Fittings
Gas Springs (Cont.)