Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
This document is scheduled to be published in theFederal Register on 10/16/2014 and available online at http://federalregister.gov/a/2014-24378, and on FDsys.gov
1
Billing Code 6355-01-P
CONSUMER PRODUCT SAFETY COMMISSION
16 CFR Part 1120
[CPSC Docket No. CPSC-2014-0024]
Substantial Product Hazard List: Seasonal and Decorative Lighting Products
AGENCY: Consumer Product Safety Commission.
ACTION: Notice of proposed rulemaking.
SUMMARY: The Consumer Product Safety Commission (CPSC or Commission) is proposing a
rule to specify that seasonal and decorative lighting products that do not contain one or more of
three readily observable characteristics (minimum wire size, sufficient strain relief, or overcurrent
protection) constitute a substantial product hazard under the Consumer Product Safety Act (CPSA).
DATES: Written comments must be received by [INSERT DATE THAT IS 75 DAYS AFTER
PUBLICATION IN THE FEDERAL REGISTER].
ADDRESSES: You may submit comments, identified by Docket No. CPSC-2014-0024, by any of
the following methods:
Electronic Submissions
Submit electronic comments in the following way:
Federal eRulemaking Portal: http://www.regulations.gov. Follow the instructions for
submitting comments.
The Commission is no longer accepting comments submitted by electronic mail (e-mail), except
through www.regulations.gov.
2
Written Submissions
Submit written submissions in the following way:
Mail/Hand delivery/Courier (for paper, disk, or CD-ROM submissions), preferably in five
copies, to: Office of the Secretary, Consumer Product Safety Commission, Room 820, 4330 East
West Highway, Bethesda, MD 20814; telephone (301) 504-7923.
Instructions: All submissions received must include the agency name and docket number for
this rulemaking. All comments received may be posted without change, including any personal
identifiers, contact information, or other personal information provided, to:
http://www.regulations.gov. Do not submit confidential business information, trade secret
information, or other sensitive or protected information electronically. Such information should be
submitted in writing.
Docket: For access to the docket to read background documents or comments received, go
to: http://www.regulations.gov.
FOR FURTHER INFORMATION CONTACT: Arthur Lee, Office of Hazard Identification and
Reduction, Consumer Product Safety Commission, National Product Testing and Evaluation Center,
5 Research Place, Rockville, MD 20850; telephone: 301-987-2008; [email protected].
SUPPLEMENTARY INFORMATION:
I. Introduction
The Commission proposes to issue a rule under section 15(j) of the CPSA, 15 U.S.C.
2064(j), that would amend the substantial product hazard list in 16 CFR part 1120 (part 1120). The
substantial product hazard list in part 1120 would be amended to add three readily observable
characteristics of seasonal and decorative lighting products: (1) minimum wire size; (2) sufficient
strain relief; and (3) overcurrent protection. If the amendment to part 1120 is finalized, seasonal
and decorative lighting products that do not contain one or more of these characteristics would be
3
deemed to create a substantial product hazard under section 15(a)(2) of the CPSA because such
products pose a risk of electrical shock or fire. These three electrical safety characteristics for
seasonal and decorative lighting products have been addressed in a voluntary standard,
Underwriters Laboratories (UL), Standard for Safety for Seasonal and Holiday Decorative
Products, UL 588, 18th Edition, approved on August 21, 2000 (UL 588).
As detailed in this notice, the Commission determines preliminarily that:
• minimum wire size, sufficient strain relief, and overcurrent protection are all
readily observable characteristics of seasonal and decorative lighting products;
• these three readily observable characteristics are addressed by a voluntary
standard, UL 588;
• conformance to UL 588 has been effective in reducing the risk of injury from
shock and fire associated with these readily observable characteristics; and
• seasonal and decorative lighting products sold in the United States substantially
comply with UL 588.
A. Background and Statutory Authority
Section 223 of the Consumer Product Safety Improvement Act of 2008 (CPSIA), amended
section 15 of the CPSA, 15 U.S.C. 2064, to add a new subsection (j). Section 15(j) of the CPSA
provides the Commission with the authority to specify, by rule, for any consumer product or class
of consumer products, characteristics whose existence or absence are deemed a substantial product
hazard under section 15(a)(2) of the CPSA. Section 15(a)(2) of the CPSA defines a “substantial
product hazard,” in relevant part, as a product defect which (because of the pattern of defect, the
number of defective products distributed in commerce, the severity of the risk, or otherwise) creates
a substantial risk of injury to the public. For the Commission to issue a rule under section 15(j) of
the CPSA, the characteristics involved must be “readily observable” and have been addressed by a
4
voluntary standard. Moreover, the voluntary standard must be effective in reducing the risk of
injury associated with the consumer products, and there must be substantial compliance with the
voluntary standard.
The Commission has issued two previous rules under section 15(j) of the CPSA involving
drawstrings on children’s upper outerwear (76 FR 42502, July 19, 2011) (drawstring rule) and
integral immersion protection on handheld hair dryers (76 FR 37636, June 28, 2011) (hair dryer
rule). The Commission did not define a “readily observable” characteristic in either rule. In the
proposed drawstring rule (75 FR 27497, 27499, May 17, 2010), the Commission found that the
requirements detailed in the relevant voluntary standard could be evaluated with “simple
manipulations of the garment, simple measurements of portions of the garments, and unimpeded
visual observation.” The Commission stated: “more complicated or difficult actions to determine
the presence or absence of defined product characteristics also may be consistent with ‘readily
observable.’” Finally, the Commission stated its intent to evaluate “readily observable”
characteristics on a case-by-case basis. 75 FR at 27499.
B. Seasonal and Decorative Lighting Products
1. Product Description
The proposed rule uses the phrase “seasonal and decorative lighting products” to identify the
lighting products that are within the scope of the rule. The Commission proposes to define
“seasonal and decorative lighting products,” consistent with the description of products subject to
the applicable voluntary standard, as set forth in section 1 of UL 588, as portable, plug-connected,
temporary-use lighting products and accessories that have a nominal 120 volt input voltage rating.
Lighting products within the scope of the rule are factory-assembled with push-in, midget- or
miniature-screw base lampholders connected in series or with candelabra- or intermediate-screw
base lampholders connected in parallel, directly across the 120 volt input. Such lighting products
5
include lighted decorative outfits, such as stars, wreathes, candles without shades, light sculptures,
blow-molded (plastic) figures, and animated figures. Lighting products outside the scope of the rule
include: battery-operated products; products that operate from a transformer or low-voltage power
supply; flexible tube lighting strings of lights intended for illumination; and portable electric lamps
that are used to illuminate seasonal decorations.
This definition of “seasonal and decorative lighting products” is adapted from descriptions
of lighting products defined in section 1 of UL 588. All in-scope products are covered by UL 588.
Lighting products within the scope of the rule are typically used seasonally and provide only
decorative lumination. The products typically are displayed for a relatively short period of time and
then removed and stored until needed again. UL 588 section 2.43 defines the term “seasonal
(holiday) product” as “[a] product painted in colors to suggest a holiday theme or a snow covering,
a figure in a holiday costume, or any decoration associated with a holiday or particular season of the
year.” UL 588 defines “decorative light products” (decorative outfits) as factory-assembled,
electrically powered units providing a seasonal or holiday decorative display having illumination or
other decorative effects. A decorative product may contain a lighting string as part of the decorative
illumination. A lighting string provided with decorative covers over the lamps is a decorative outfit.
If not constructed properly, lighting powered by 120 volts can be damaged easily and can pose a
risk of electrical shock, electrocution, or fire.
Lighting products that are excluded from the scope of the rule are subject to different
voluntary standards or do not present the same risk of injury. Table 1 provides a non-exhaustive list
of examples of lighting products that fall within, and outside of, the scope of the proposed rule.
6
Table 1: Seasonal and Decorative Lighting Products Within the Scope of the Draft Proposed Rule
In Scope: • Incandescent or LED light sets, 120 volts, cord-connected, either series
or parallel wired, with either screw-in or mini-base push-in bulbs • Pre-lit artificial trees, wreaths, menorahs, lawn figures, light sculptures,
and other decorative outfits and accessories incorporating light sets Out of Scope: • Rope, tube, or tape lights without replaceable bulbs • Landscape lights or other permanent lighting devices, either assembled
or unassembled • Battery-operated or transformer-connected light sets • Unlighted ornaments that replace a push-in mini-bulb
2. Applicable Voluntary Standard
UL 588-2000 is the current voluntary standard applicable to seasonal and decorative lighting
products. UL 588 has been updated over the years to address various safety issues to make seasonal
and decorative lighting products safer, see Staff’s Briefing Package on Seasonal and Decorative
Lighting Products, dated October 1, 2014 (Staff Briefing Package), Tab B, Abbreviated History of
Seasonal and Decorative Lighting Products and the Associated UL Standard, at
http://www.cpsc.gov/Global/Newsroom/FOIA/CommissionBriefingPackages/2015/ProposedRuleto
AmendSubstantialProductHazardListtoIncludeSeasonalandDecorativeLightingProducts.pdf.
Specifically, UL 588 made effective on January 1, 1997, the current requirements for overcurrent
protection and minimum wire size, and the current strain relief requirement has been in effect since
1994. Table 2 summarizes the relevant sections and technical requirements in UL 588 for each of
the three readily observable characteristics.
7
Table 2. Readily Observable Characteristics for Seasonal and Decorative Lighting Products
Seasonal and Decorative Lighting Products
Readily Observable Characteristics
Minimum Wire Size (AWG)
UL 588 Section 6
Sufficient Strain Relief (load weight) Overcurrent Protection Qty.
UL 588 Section 7
Plugs/Load Fittings UL 588 Sections
15 and 71
Lampholders UL 588 Sections
79 and SB16 Series-
connected lighting product
With Load Fitting
20 (Polarized Plug) 20 lbs. (smaller than 18 AWG)
24 lbs. 1 22 (Non-Polarized Plug) 8 lbs. 2
Without Load Fitting
22 (Polarized Plug) 8 lbs. 1 22 (Non-Polarized Plug 8 lbs. 2
Parallel-connected
light product
With or Without Load
Fitting
20 (XTW) 18 (all others)
All Polarized Plugs
20 lbs. (20 AWG) 30 lbs. (18 AWG) 24 lbs. 1
3. Electrocution and Fire Hazards
Consumers can be seriously injured or killed by electrical shocks or fires if seasonal and
decorative lighting products are not made using minimum wire size, sufficient strain reliefs, or
overcurrent protection. Lighting products that conform to the minimum wire size requirement in
UL 588 will support the product’s electrical load without causing overheating. Additionally,
lighting products that conform to the minimum wire size requirement provide the necessary
mechanical strength to endure handling and other forces imposed on a seasonal lighting product
during expected use of the product. Likewise, lighting products that conform to the strain relief
requirements in UL 588 will endure use, including pulling and twisting the product, without
mechanical damage to the electrical connections. Damaged electrical connections, such as broken
strands of copper conductor inside the insulated wiring, could cause overheating (leading to a fire),
despite overcurrent protection, or separation of wires from their terminal connections, which could
expose bare energized conductors leading to electrical shock. Finally, UL 588’s requirements for
overcurrent protection prevent products from overheating and melting due to faults, damage, or
excessive loads. Such failures carry a potential risk of fire.
8
4. Risk of Injury
CPSC has been concerned with the number of fires and injuries resulting from seasonal and
decorative lighting products for many years. From 1980 through 1997, CPSC received reports of
206 deaths and 808 nonfatal incidents involving seasonal and decorative lighting products that
resulted in a fire and/or shock hazard. In a June 1995 report titled, “Electrical Holiday Lighting,”
CPSC staff cited annual averages of 500 fire service-attended fires and 30 deaths involving
Christmas trees and another 68 fire deaths and shocks specifically related to electrical decorations.
More recently, staff’s evaluation of the shock and fire hazard data related to seasonal and
decorative lighting demonstrates that from 1980 through 2013, CPSC is aware of 132 fatal
incidents, 256 deaths, and 1,255 non-fatal incidents associated with seasonal and decorative lighting
products. Table 3 summarizes CPSC’s injury data from 1980 through 2013, based on annual
averages related to seasonal and decorative lighting products. Note that the average number of
incidents and deaths has declined over the 33-year period represented in Table 3.
Table 3. Seasonal and Decorative Lighting Product Annual Average1 of Fatal Incidents, Deaths, and Non-fatal Incidents from 1980 – 2013
Years Fatal Incidents Deaths Non-fatal Incidents 1980–1986 6.7 12.6 54.1 1987–1993 6.3 13.6 40.9 1994–2000 2.9 5.9 37.4 2001–2007 2.1 3.6 32.6 2008−2013 1.0 1.2 16.7
5. Office of Compliance Efforts, to Date
In numerous instances, CPSC staff has considered the absence of one or more of the three
readily observable characteristics (minimum wire size, sufficient strain relief, and overcurrent
protection) to present a substantial product hazard and has sought appropriate corrective action to
prevent injury to the public. Since 1974, CPSC staff has conducted 47 voluntary recalls of seasonal
1 The numbers are given as annual averages instead of totals because there are four 7-year periods and one 6-year period.
9
and decorative lighting products, involving a total of 3.6 million units. See Tab D of Staff’s
Briefing Package, Seasonal and Decorative Lighting Product Recalls and Import Stoppages. In
addition to product recalls, CPSC staff has stopped noncompliant seasonal and decorative lighting
products at the ports at least 127 times, involving 31 companies and a total of about 200,000
lighting units. Id. Tables 1 and 2 in Tab D of the Staff’s Briefing Package provide details on both
voluntary recalls and import stoppages. Note that where the information is available, most of the
hazards identified by staff in recalling or stopping seasonal and decorative lighting products would
be deemed a substantial product hazard under the proposed rule.
Additionally, the Office of Compliance sent a letter dated July 14, 2014, to manufacturers,
importers, distributors, and retailers of holiday lights and decorative products, informing them that
the Office of Compliance considers products that do not conform to UL 588 regarding minimum
wire size, sufficient strain relief, and overcurrent protection to be defective and to present a
substantial product hazard. See Tab A of Staff’s Briefing Package, Office of Compliance July 14,
2014 Letter to Manufacturers, Importers, and Retailers of Holiday Lights and Decorative Outfits.
II. Preliminary Determination of Substantial Product Hazard
A. Defined Characteristics Are Readily Observable
Sections 6, 7, 15, 71, 79, and SB16 of UL 588 set forth the requirements for the three readily
observable characteristics in the proposed rule: minimum wire size, sufficient strain relief, and
overcurrent protection. Table 2 in section I.B.2 of this Preamble summarizes the technical
requirements for the three readily observable characteristics in UL 588. Additionally, Tab C of the
Staff’s Briefing Package, Readily Observable Safety Characteristics of Seasonal and Decorative
Lighting Products, provides more detail on the information presented in Table 2. If finalized, the
rule would deem the absence of any one or more of these characteristics to be a substantial product
hazard under section 15(a)(2) of the CPSA.
10
1. Minimum Wire Size
Section 6 of UL 588 requires that series-connected lighting products have a minimum wire
size of 20 or 22 AWG, depending on whether the lighting product has a load fitting, and whether
the plug is polarized. Parallel-connected lighting products must have a minimum wire size of 18 or
20 AWG, depending on the type of wire used in constructing the product. Whether a lighting
product is series or parallel constructed, contains a load fitting, or has a polarized plug are all
visually observable characteristics of seasonal and decorative lighting products. Pictures 1 and 2
show examples of series-connected and parallel-connected lighting products.
Wire size is observable by a simple measurement of the bare conductors. Before measuring
the wire size, staff must expose the conductors within the wire. One method of measuring the
exposed conductors is using a circular wire gauge, as shown in picture 3. In CPSC staff’s
experience, those lighting products that do not meet the minimum wire size requirement typically
fail by using wiring that is substantially undersized for the product, for example, more than six wire
sizes smaller than the minimum required. Moreover, the act of exposing and measuring the wire in
a seasonal and decorative lighting product is quickly and easily done by using a small, handheld
device to strip the electrical insulation from the wiring. Accordingly, the Commission concludes
preliminarily that minimum wire size, as required in section 6 of UL 588, is a readily observable
Picture 1: Series-connected miniature light string Picture 2: Parallel-connected screw-base bulbs light string
11
characteristic of seasonal and decorative lighting products that can be observed visually by taking a
simple measurement of the product’s bare wire.
Picture 3: Measuring Wire Size (AWG) of Seasonal Light String
2. Sufficient Strain Relief
Sections 15, 71, 79, and SB16 of UL 588 set forth the requirements for sufficient strain
relief in seasonal and decorative lighting products. Strain relief is observed in several locations: at
the plugs and load fittings, as well as at the lampholders. Pursuant to UL 588, sufficient strain relief
is observed by suspending a gradually applied straight pull on the wiring by use of a suspended
weight for 60 seconds. During that time, wires with sufficient strain relief will not pull loose or
stretch from the lampholder, plug, or load fitting being tested. Picture 4 demonstrates observation
of sufficient strain relief on a plug.
12
Picture 4: Observation of Strain Relief on a Plug
The applicable weight required in UL 588 to be suspended from the lighting product
depends on its configuration. Section 15 of UL 588 describes the general requirements that strain
relief must be provided on the electrical connection used in seasonal and decorative lighting
products. Sections 71, 79, and SB16 of UL 588 describe the specific requirements. Section 71 of
UL 588 requires that series-connected plugs and load fittings be subjected to a 20-lb. weight. For
parallel-connected lighting products, plugs and load fittings for products with wires smaller than 18
AWG must be subjected to a 20-lb. weight, and products with wires 18 AWG or larger must be
subjected to a 30-lb. weight. Similarly, sections 79 and SB16 of UL 588 specify applicable weights
to observe sufficient strain relief in lampholders. For series-connected lighting products, if the
wires are smaller than 20 AWG, the weight applied must be a minimum of 8 lbs., and if the wires
are 20 AWG or larger, the weight applied must be a minimum of 24 lbs. For parallel-connected
lampholders, if the wires are 20 AWG or larger, the weight applied must be a minimum of 24 lbs.
The applicable weights are summarized in Table 2 in section I.B.2 of this Preamble.
13
The strain relief portion of UL 588 for seasonal and decorative lighting products is
observable visually by hanging a weight on the light string for 60 seconds and observing whether
the weight drops or stretches the wiring. In CPSC staff’s experience, lighting products that fail the
strain relief requirements in UL 588 do so immediately or within a few seconds of suspending the
applicable weight. The Commission concludes preliminarily that sufficient strain relief, as required
in sections 15, 71, 79, and SB16 of UL 588, is a readily observable characteristic of seasonal and
decorative lighting products that can be determined by suspending the applicable weight from the
plug, load fitting, or lampholder, and by observing visually whether the wire breaks or stretches.
3. Overcurrent Protection
Section 7 of UL 588 specifies overcurrent protection for every seasonal and decorative
lighting product. Lighting products must contain at least one fuse if the plug is polarized (parallel-
connected strings must have a polarized plug) or two fuses if the plug is not polarized.
A seasonal light string with overcurrent protection is readily observable by the presence of a
fuse holder located in the plug or near the plug, and observing the presence of a fuse by opening the
fuse holder. Picture 5 depicts a light string with a plug containing the fuses required by UL 588.
The Commission concludes preliminarily that overcurrent protection, as required in section 7 of UL
588, is a readily observable characteristic of seasonal and decorative lighting products that can be
determined by a visual observation of whether the lighting product has a fuse holder containing the
correct number of fuses.
Picture 5: Fuse
14
B. Conformance to UL 588 Has Been Effective in Reducing the Risk of Injury
The Commission finds preliminarily that conformance to sections 6, 7, 15, 71, 79, and SB16
of UL 588, as summarized in Table 2 in section I.B.2 of this Preamble, has been effective in
reducing the risk of injury from shock and fire associated with below-minimum wire size,
insufficient strain relief, and lack of overcurrent protection. Additionally, CPSC’s incident data
suggest that conformance to UL 588 has contributed to a decline in the risk of injury associated with
seasonal and decorative lighting products. See Tab E of Staff’s Briefing Package, Seasonal
Lighting and Decorative Products: Fire or Shock Incidents from 1980 to 2013.
If incandescent light strings last approximately three seasons of use,2 then it can be expected
that product changes made to conform to new requirements in UL 588 would be evident within a
period of time thereafter. On January 1, 1997, UL 588’s requirements for overcurrent protection
and minimum wire size took effect; and the current strain relief requirement has been in effect since
1994. Table 4 lists the deaths associated with seasonal and decorative lighting products for the
periods 1980−1996 and 2000−2013. The years from 1997 to 1999 would have been transitional
years, where older products in consumer homes were being replaced with light strings incorporating
the January 1, 1997 changes (minimum wire size and overcurrent protection) in the UL standard.
The average number of deaths per year and the average number of nonfatal incidents per year were
higher before 1997, and the numbers dropped after 1999.
Table 4: Deaths Associated with Seasonal and Decorative Lighting Products Period 1980–1996 2000−2013 Deaths 202 43
Nonfatal Incidents 762 366 Average Deaths per year 11.88 3.07
Average Nonfatal Incidents per year 44.82 26.14
2 Incandescent light strings advertise that the products have a usual design life span of approximately 1,500 hours. Using an average of 12 hours per day for 40 days per year, incandescent light strings last approximately 3 years.
15
Figure 1 presents a 3-year moving average for deaths due to seasonal and decorative lighting
products, by year, for the period 1980−2013 for data from the Potential Injury Database (IPII),
National Electronic Injury Surveillance System (NEISS), and the Death Certificate Database
(DTHS). Figure 1 shows that the number of deaths started to decline as early as 1990, and
continued on a downward trend to 2013, with the exceptions of yearly fluctuations. This early
decrease may be due to various factors, such as changes to UL 588, home building codes, and fire-
prevention strategies. Since 2004, the continuation of low death rates is partially attributed to the
construction and performance requirements in the current UL 588 standard.
Figure 1. Three-Year Moving Averages of Seasonal Lighting and Decorative Product Deaths from 1980 to 20133
Figure 2 presents a 3-year moving average for nonfatal incidents due to seasonal and
decorative lighting products, by year, for the period 1980−2013 for data from IPII and NEISS.
Figure 2 also demonstrates an overall downward trend to 2013, with the exceptions of yearly
fluctuations. The decrease can be attributed to several factors, including: changes to UL 588, home
building code, and fire prevention strategies. However, the construction and performance
3 Incident data is from Potential Injury Database (IPII), National Electronic Injury Surveillance System (NEISS), and the Death Certificate Database (DTHS).
0.0
5.0
10.0
15.0
20.0
25.0
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
Deat
hs
Year
Seasonal Lighting and Decorative Product Deaths 3-Year Moving Averages
16
requirements in the current UL 588 standard for seasonal and decorative lighting products with
minimum wire size, sufficient strain relief, and overcurrent protection have made the products safer
than products manufactured without these construction and performance requirements.
Figure 2. Three-Year Moving Averages of Seasonal Lighting and Decorative Product Nonfatal Incidents from 1980 to 20132
C. Lighting Products Substantially Comply with UL 588
The CPSA does not define “substantial compliance” with a voluntary standard. Legislative
history of the CPSA regarding a finding of “substantial compliance” in the context of issuing a
consumer product safety standard indicates that substantial compliance should be measured by
considering the number of complying products, rather than the number of manufacturers of products
that comply with a standard. H.R. Rep. No. 208, 97th Cong., 1st Sess. 871 (1981). This same
legislative history indicates further that substantial compliance may be found when an unreasonable
risk of injury associated with a product will be eliminated or adequately reduced “in a timely
fashion.” Id. The Commission has not articulated a bright line rule for substantial compliance.
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013Se
ason
al L
ight
ing
Inci
dent
s
Year
Seasonal Lighting and Decorative Product Nonfatal Incident 3-Year Moving Averages
17
Rather, in the rulemaking context, the Commission has stated that the determination of substantial
compliance should be made on a case-by-case basis.
The Commission finds preliminarily that compliance with UL 588 is “substantial” as that
term is used in section 15(j) of the CPSA. The Commission’s preliminary finding is based on
CPSC staff’s review of market information and compliance activity, and staff’s estimate that a
majority of seasonal and decorative lighting products, well in excess of 90 percent, sold for
consumer use in the United States, likely conforms to UL 588. See Tab F of Staff’s Briefing
Package, Conformance to UL Voluntary Standard for Seasonal and Decorative Lighting Products.
The U.S. Department of Homeland Security’s Customs and Border Patrol (CBP) reported
that in 2013, the import value of products that would be covered by the draft proposed rule was
about $500 million, comprised of roughly 20,000 “entries” or product shipments. If the average
import value per unit were $5.00 (based on the range of retail prices observed by staff), then the
number of units imported annually may be up to 100 million. CBP also reported that about 550
firms were engaged in the importation of seasonal and decorative lighting products during 2013.
Adjusting to exclude shipping companies and other third parties, the total number of firms
importing seasonal and decorative lighting products into the United States was probably about 500,
with the largest number of shipments originating from the People’s Republic of China. An online,
wholesale directory identified about 160 manufacturers and suppliers in China, Hong Kong, and
Taiwan, with about 120 of these exporting products to the United States. Another online product
directory identified more than 2,000 individual models of products from manufacturers located in
China.
For purposes of this analysis, the Commission considers all seasonal and decorative lighting
products carrying a listing or certification mark from UL, Intertek Company (ETL), or the CSA
Group (CSA) to be in conformance with the requirements of UL 588. Staff’s Internet search of
18
online catalogs, demonstrates that all of the 20 to 30 major national brands, which probably account
for a majority of all units sold, consist only of conforming products because they are labeled as UL,
ETL, or CSA compliant. Major retailers also often specify conforming products. Although CPSC
recalls and import stoppages involve a very small percentage of product units in commerce,
available CPSC data on recalls and import stoppages over the past decade suggest a very low (less
than 1 percent) incidence of defects and nonconformance. The Commission finds that all of these
factors indicate that conformance with UL requirements is very high, and estimates that voluntary
conformance with UL 588 is in excess of 90 percent of all units.
III. Description of the Proposed Rule
The proposed rule would create two new paragraphs in part 1120. Proposed § 1120.2(d)
would define a “seasonal and decorative lighting product” as portable, plug-connected, temporary-
use lighting products and accessories that have a nominal 120 volt input voltage rating. Lighting
products within the scope of the rule are factory-assembled with push-in, midget- or miniature-
screw base lampholders connected in series or with candelabra- or intermediate-screw base
lampholders connected in parallel, directly across the 120 volt input. Such lighting products include
lighted decorative outfits, such as stars, wreathes, candles without shades, light sculptures, blow-
molded (plastic) figures, and animated figures. Lighting products outside the scope of the rule
include: battery-operated products; products that operate from a transformer or low-voltage power
supply; flexible tube lighting strings of lights intended for illumination; and portable electric lamps
that are used to illuminate seasonal decorations.
This definition is adapted from descriptions of lighting products defined in section 1 of UL
588. Lighting products within the scope of the rule are typically used seasonally (temporarily) and
provide only decorative lumination. The products typically are displayed for a relatively short
period of time and then removed and stored until needed again. Lighting products that are excluded
19
from the scope of the rule are subject to different voluntary standards or do not present the same
risk of injury.
Proposed § 1120.3(d) would state that seasonal and decorative lighting products that do not
conform to one or more of the following characteristics required in sections 6, 7, 15, 71, 79, and
SB16 of UL 588 (explained in more detail in sections I.B.2 (Table 2) and II.A of this Preamble) are
deemed substantial product hazards under section 15(a)(2) of the CPSA:
(1) minimum wire size requirements in section 6 of UL 588;
(2) sufficient strain relief requirements in sections 15, 71, 79, and SB16 of UL 588; or
(3) overcurrent protection requirements in section 7 of UL 588.
IV. Effect of the Proposed 15(j) Rule
Section 15(j) of the CPSA allows the Commission to issue a rule specifying that a consumer
product or class of consumer products has characteristics whose presence or absence creates a
substantial product hazard. If a final rule is issued under section 15(j) of the CPSA, such a rule
would not be a consumer product safety rule, and thus, would not create a mandatory standard that
triggers testing or certification requirements under section 14(a) of the CPSA.
Although a rule issued under section 15(j) of the CPSA is not a consumer product safety
rule, placing a consumer product on the substantial product hazard list in 16 CFR part 1120 would
have certain ramifications. A product that is or has a substantial product hazard is subject to the
reporting requirements of section 15(b) of the CPSA, 15 U.S.C. 2064(b). A manufacturer, importer,
distributor, or retailer that fails to report a substantial product hazard to the Commission is subject
to civil penalties under section 20 of the CPSA, 15 U.S.C. 2069, and possibly to criminal penalties
under section 21 of the CPSA, 15 U.S.C. 2070.
A product that is or contains a substantial product hazard is also subject to corrective action
under sections 15(c) and (d) of the CPSA, 15 U.S.C. 2064(c) and (d). Thus, if a final rule is issued
20
under section 15(j) for seasonal and decorative lighting, the Commission could order the
manufacturer, importer, distributor, or retailer of lighting products that do not contain one or more
of the three readily observable characteristics to offer to repair or replace the product, or to refund
the purchase price to the consumer.
A product that is offered for import into the United States and is or contains a substantial
product hazard shall be refused admission into the United States under section 17(a) of the CPSA,
15 U.S.C. 2066(a). Additionally, CBP has the authority to seize certain products offered for import
under the Tariff Act of 1930 (19 U.S.C. 1595a) (Tariff Act), and to assess civil penalties that CBP,
by law, is authorized to impose. Section 1595a(c)(2)(A) of the Tariff Act states that CBP may seize
merchandise, and such merchandize may be forfeited if: “its importation or entry is subject to any
restriction or prohibition which is imposed by law relating to health, safety, or conservation and the
merchandise is not in compliance with the applicable rule, regulation, or statute.”
V. Regulatory Flexibility Act Analysis
The Regulatory Flexibility Act (RFA) requires that proposed rules be reviewed for the
potential economic impact on small entities, including small businesses. 5 U.S.C. 601-612. Section
603 of the RFA requires agencies to prepare and make available for public comment an Initial
Regulatory Flexibility Analysis (IRFA), describing the impact of the proposed rule on small entities
and identifying impact-reducing alternatives. For the reasons that follow, the Commission
concludes that the proposed rule will not have a significant impact on a substantial number of small
entities.
Based on staff’s review of information on importers, of the roughly 500 companies that
import seasonal and decorative lighting products in the United States, staff estimates that 400 to 450
would be considered small firms under the U.S. Small Business Administration’s size guidelines.
CPSC staff estimates that a very high percentage, probably well in excess of 90 percent of products
21
that would be subject to a rule, already conform to UL 588. Importers, distributors, and retailers
that market only UL 588-conforming products would not be affected. Staff has observed that small
importers, distributors, and retailers of nonconforming light sets generally market other related
products as well. The sales revenue of these small firms is not solely dependent on seasonal
lighting products. Thus, income for these small firms would not be affected significantly, and,
except for the nonconforming light sets, product lines would not be curtailed significantly.
Furthermore, the draft proposed rule represents a continuation of the existing practice of the CPSC’s
Office of Compliance and Field Operations to designate nonconforming seasonal lighting products
as a substantial product hazard.
VI. Environmental Considerations
Generally, the Commission’s regulations are considered to have little or no potential for
affecting the human environment, and environmental assessments and impact statements are not
usually required. See 16 CFR 1021.5(a). The proposed rule to deem seasonal and decorative
lighting products that do not contain one or more of three readily observable characteristics to be a
substantial product hazard is not expected to have an adverse impact on the environment and is
considered to fall within the “categorical exclusion” for the purposes of the National Environmental
Policy Act. 16 CFR 1021.5(c).
VII. Paperwork Reduction Act
The proposed rule does not require any stakeholder to create, maintain, or disclose
information. Thus, no paperwork burden is associated with the proposed rule, and the Paperwork
Reduction Act of 1995 (44 U.S.C. 3501–3520) does not apply.
22
VIII. Preemption
The proposed rule under section 15(j) of the CPSA would not establish a consumer product
safety rule. Accordingly, the preemption provisions in section 26(a) of the CPSA, 15 U.S.C.
2075(a), would not apply to this rule.
IX. Effective Date
The Administrative Procedure Act (APA) generally requires that the effective date of a rule
be at least 30 days after publication of a final rule. 5 U.S.C. 553(d). The Commission proposes that
any seasonal and decorative lighting product that does not conform to sections 6, 7, 15, 71, 79, and
SB16 of UL 588 with regard to minimum wire size, sufficient strain relief, and overcurrent
protection is deemed a substantial product hazard effective 30 days after publication of a final rule
in the Federal Register. After that date, all seasonal and decorative lighting products that are
subject to, but do not comply with, UL 588 with respect to minimum wire size, sufficient strain
relief, or overcurrent protection, will be deemed to be a substantial product hazard, regardless of the
date such products were manufactured or imported. The Commission believes that a 30-day
effective date is appropriate because:
• seasonal and decorative lighting products are already in substantial conformance
with UL 588;
• the requirements for the readily observable characteristics from UL 588 in the
proposed rule (wire size, strain relief, and overcurrent protection) have been in effect
as a voluntary standard since the 1990s, and are well-known;
• the Office of Compliance sent a letter dated July 14, 2014, to manufacturers,
importers, and retailers of holiday lights and decorative outfits, informing them that
the Office of Compliance considers products that do not conform to UL 588,
23
regarding minimum wire size, sufficient strain relief, and overcurrent protection, to
be defective and present a substantial product hazard; and
• importers can substitute conforming products, if necessary, before a final rule
becomes effective.
Based on the available information, the Commission concludes that a 30-day effective date would
not likely result in significant impacts on industry or disrupt the supply of conforming products.
X. Request for Comments
The Commission invites interested persons to submit their comments to the Commission on
any aspect of the proposed rule. Comments should be submitted as provided in the instructions in
the ADDRESSES section at the beginning of this notice.
List of Subjects in 16 CFR Part 1120
Administrative practice and procedure, Clothing, Consumer protection, Household appliances,
Lighting, Infants and children, Imports, Incorporation by reference.
For the reasons stated above, and under the authority of 15 U.S.C. 2064(j), 5 U.S.C. 553,
and section 3 of Public Law 110-314, 122 Stat. 3016 (August 14, 2008), the Consumer Product
Safety Commission proposes to amend 16 CFR part 1120 as follows:
PART 1120 – SUBSTANTIAL PRODUCT HAZARD LIST
1. The authority citation for part 1120 continues to read as follows:
Authority: 15 U.S.C. 2064(j).
2. In § 1120.2, add paragraph (d) to read as follows:
§ 1120.2 Definitions.
* * * * *
(d) Seasonal and decorative lighting product means portable, plug-connected, temporary-
use lighting products and accessories that have a nominal 120 volt input voltage rating. Lighting
24
products within the scope of the rule are factory-assembled with push-in, midget- or miniature-
screw base lampholders connected in series or with candelabra- or intermediate-screw base
lampholders connected in parallel, directly across the 120 volt input. Such lighting products include
lighted decorative outfits, such as stars, wreathes, candles without shades, light sculptures, blow-
molded (plastic) figures, and animated figures. Lighting products outside the scope of the rule
include: battery-operated products; products that operate from a transformer or low-voltage power
supply; flexible tube lighting strings of lights intended for illumination; and portable electric lamps
that are used to illuminate seasonal decorations.
3. In § 1120.3, add paragraph (c) to read as follows:
§ 1120.3 Products deemed to be substantial product hazards.
* * * * *
(c)(1) Seasonal and decorative lighting products that lack one or more of the following
characteristics in conformance with requirements in sections 6, 7, 15, 71, 79, and SB16 of
Underwriters Laboratories (UL) Standard for Safety for Seasonal and Holiday Decorative Products,
UL 588, 18th Edition, approved August 21, 2000 (UL 588):
(i) Minimum wire size requirements in section 6 of UL 588;
(ii) Sufficient strain relief requirements in sections 15, 71, 79, and SB16 of UL 588; or
(iii) Overcurrent protection requirements in section 7 of UL 588.
(2) The Director of the Federal Register approves the incorporations by reference in
accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy from UL, Inc., 333
Pfingsten Road, Northbrook, IL 60062. You may inspect a copy at the Office of the Secretary, U.S.
Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD
20814, telephone 301-504-7923, or at the National Archives and Records Administration (NARA).
25
For information on the availability of this material at NARA, call 202-741-6030, or go to:
http://www.archives.gov/federal-register/cfr/ibr-locations.html.
Dated: October 8, 2014. _________________________________ Todd A. Stevenson, Secretary, Consumer Product Safety Commission.
[FR Doc. 2014-24378 Filed 10/15/2014 at 8:45 am; Publication Date: 10/16/2014]