Upload
janis-cannon
View
215
Download
1
Tags:
Embed Size (px)
Citation preview
Bicycle Mechanics and Repair DecalPhysics 98/198
Spring 14
Hubs and Ball Bearings
1992 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
Thinner, lighter, stronger, more accurately made and more expensive than parts made by other methods such as casting
1992 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
Gravity-cast parts are not as strong as cold-forged parts, although they are often indistinguishable by look.
1992 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
Melt-forged parts are not as strong as gravity-cast parts or cold-forged parts, but are still strong and affordable.
1993 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
Investment Casting
1993 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
1993 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
1993 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
Bulge-Forming (Hydoforming)
1993 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
1993 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
1993 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
Marin Bikes
1993 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
Stamping
1993 Bridgestone Cataloghttp://www.sheldonbrown.com/bridgestone/index.html
Components - Hubs
Hub Body
Axle
Locknut
Cone
Cup
Axle
Bearings
Cone
Locknut
Hub Body
Quick Release Skewer
←………!
Types of Ball Bearings
Radial contact
Angular contact Four point contact
Axial contact
Angled Contact Bearings
• Allows wheel to spin about axle
• Radial and lateral load bearing
Hub BearingsCup and cone assembly
Where Else Can We Find Bearings?
Sealed Bearings
Takes High Radial Force
Reduces Gunk Buildup on ball bearings
• Axle rotates on bearings so they roll with as little friction as possible.• Bearings are sometimes sealed• Bearings should always be greased.• Always try to replace bearings when opening a hub, bottom bracket or headset. They are cheap!
http://mtobikes.com/tight-hubs/
http://www.sheldonbrown.com/gloss_an-z.html
Tightening Cones