Embed Size (px)
DESCRIPTION
- Profesiomal tools, - Timing sets... www.svetorodja.si FACEBOOK: svet orodja
Citation preview
2014Qua
lity
and Service
since
1970 For more items see ourMain Catalog 2013/2014
New Items2013/2
014
Catalog 2013/2014
Distribution:
www.bgstechnic.com
670 670
679
681
683
684
685
686
690
694
759 759
760
762
764
765 765
768
775
776
D 778 GB 780 F 782 E 784 NL 786
788
HAND TOOLSSocket Sets & Tool Sets
Sockets
Bit Sockets, Bits & Accessories
Ratchets, Extension Bars, Adaptors & more
Spanners & Ratchet Wrenches
Screw Drivers & Key Sets
Hammers, Drills, Scissors & Cutters
Pliers & Special Pliers
AUTOMOTIVE TOOLSBrake System Tools 694
Chassis / Suspension Tools 698
Car Body Tools 708
Automotive Tools 714
Engine Timing Tools 717
Engine Tools 726
Motorcycle Tools 732
MISCELLANEOUS TOOLS & SMALL PARTSElectrician’s Tools
Small Parts / Consumables
House, Garden & other
Merchandise
DIY SECTIONHand Tools
Automotive Tools
Consumables
House & Garden
Alphabetical Index
Numerical Index
Visit www.bgstechnic.com for New Items and subscribe to our NewsletterAll images, texts and graphic displays Copyright© BGS technic KG. Any use or reproduction only with written permission of BGS technic.
BGS technic®, Kraftmann® & ProTorque® are registered trademarks of BGS technic KG.XZN®, Ribe® and Torx® are registered trademarks of the respective holders. BGS „T-Star“ system is compatible with Torx® fi xing systems.
All items displayed in this catalog, especially product composition and layout, can change due to constant development and are non-binding.Please visit www.bgstechnic.com to see the latest news and updates about all products.
BGS technic KG, POB 1450, 42907 Wermelskirchen; HR Köln 15916; Domicile Wermelskirchen
Oil Service Tools 737
Test Tools 741
Workshop Equipment 745
Torque Tools 752
Air & Impact Tools 753
Car Accessories 757
670
276
318
2232
2335
250
239
8203
292
319
246
299
291
284
290
234
235
289
251
320
2259
213-piece Socket Set
- all parts manufactured from chrome vanadium steel- hardness and torque in accordance with DIN- with „Super Lock“ and E-type sockets and combination spanner set- 3 fine 72 tooth reversible ratchets
Item #
So
ck
et S
ets
& T
oo
l Se
ts
Set Contents
Item # Description
Sliding T-Bar, 6.3 (1/4)
Reversible Ratchet with Quick Release Handle, 6.3 (1/4)
Extension Bar Wobble, 50 mm, 6.3 (1/4)
Extension Bar, 100 mm, 6.3 (1/4)
Universal Joint, 6.3 (1/4)
Spin. Handle, 150 mm, 6.3 (1/4)
Bit Holder, 6.3 (1/4)
Bit Holder for 8 mm Bits, 6.3 (1/4)
Reversible Ratchet with Quick Release Handle, 10 (3/8)
Extension Bar Wobble, 125 mm, 10 (3/8)
Universal Joint, 10 (3/8)
Bit Holder for 8 mm Bits, 10 (3/8)
Bit Holder for 14 mm Bits, 12.5 (1/2)
Bit Holder for 8 mm Bits, 12.5 (1/2)
Extension Bar Wobble, 125 mm, 12.5 (1/2)
Extension Bar Wobble, 250 mm, 12.5 (1/2)
Sliding Adaptor f. 12.5 (1/2) Extension Bars, 3/8 int. x 1/2 ext.Universal Joint, 12.5 (1/2)
Reversible Ratchet with Quick Release Handle, 12.5 (1/2)
L-Type Wrench Set, 7 piece, Int. Hex., 1, 1.5, 2, 2.5, 3, 4, 4.5 mm
671
4380 8,0 mm
4381 10,0 mm
4382 12,0 mm
4383 PH 3
4384 PH 4
4385 PZ 3
4386 PZ 4
4387 7 mm
4388 8 mm
4389 10 mm
4390 12 mm
4391 14 mm
4440 T 40
4445 T 45
4450 T 50
4455 T 55
4460 T 60
4458 T 70
8164 T 40
8165 T 45
8166 T 50
8168 T 55
4456 T 60
4457 T 70
5184-R7 R 7 x 240 mm
5184-R8 R 8 x 240 mm
5184-R9 R 9 x 100 mm
5184-R10 R 10 x 140 mm
5184-TB30 T 30 x 300 mm
5184-T40 T 40 x 140 mm
5184-T45 T 45 x 140 mm
5184-T50 T 50 x 140 mm
5184-T55 T 55 x 140 mm
5184-T60 T 60 x 140 mm
5184-TB80 T 80 x 100 mm
5184-HB5 5 mm x 160 mm
5184-H7 7 mm x 230 mm
5184-H10 10 mm x 140 mm
5184-H11 11 mm x 140 mm
5184-H17 17 mm x 55 mm
5184-H19 19 mm x 55 mm
5184-H22 22 mm x 55 mm
5184-H24 24 mm x 55 mm
5184-M9 M 9 x 100 mm
5184-M10 M 10 x 140 mm
5184-M12 M 12 x 140 mm
4346 M 16 x 55 mm
4356 M 16 x 55 mm
4357 M 16 x 100 mm
4347 M 18 x 55 mm
5184-M18 M 18 x 80 mm
2625 T 5
2626 T 6
8217 T 7
2436 T 7
2439 TS 10
2440 TS 15
2441 TS 20
2442 TS 25
2443 TS 27
2444 TS 30
2445 TS 40
2431 TS 45
2635 M 5
2636 M 6
2637 M 7
2638 M 8
2639 M 9
2645 M 5
2646 M 6
2647 M 8
2472 16 mm, 12.5 (1/2)2464 18 mm, 10 (3/8)2470 21 mm, 12.5 (1/2)
2910 10 mm
2911 11 mm
2912 12 mm
2913 13 mm
2914 14 mm
2915 15 mm
2916 16 mm
2917 17 mm
2918 18 mm
2919 19 mm
2920 20 mm
2921 21 mm
2922 22 mm
2924 24 mm
2927 27 mm
2930 30 mm
2932 32 mm
10556 16 mm
10557 17 mm
10558 18 mm
10559 19 mm
10562 22 mm
6418 E18
6420 E20
6424 E24
10570 10 mm
10571 11 mm
10572 12 mm
10573 13 mm
10574 14 mm
10575 15 mm
10576 16 mm
10577 17 mm
10578 18 mm
10579 19 mm
10530 10 mm
10531 11 mm
10532 12 mm
10533 13 mm
10534 14 mm
10535 15 mm
6410 E10
6411 E11
6412 E12
6414 E14
6416 E16
2474 4 mm
2475 4,5 mm
2476 5 mm
2477 5,5 mm
2478 6 mm
2479 7 mm
2480 8 mm
2481 9 mm
2482 10 mm
2483 11 mm
2484 12 mm
2485 13 mm
2486 14 mm
10504 4 mm
10505 5 mm
10506 6 mm
10507 7 mm
10508 8 mm
10509 9 mm
10510 10 mm
6404 E4
6405 E5
6406 E6
6407 E7
6408 E8
T 70 x 40 mm
T 70 x 40 mm
T 70 x 115 mm
M 14 x 115 mm
M 14 x 40 mm
M 8 x 40
13 x 115 mm
14 x 40 mm
2493 4,0 mm
2494 5,5 mm
2495 6,5 mm
2496 7,0 mm
2504 PH 0
2487 PH 1
2488 PH 2
2505 PZ 0
2490 PZ 1
2491 PZ 2
2497 3 mm
2498 4 mm
2499 5 mm
2500 6 mm
2589 T 8
2588 T 9
2590 T 10
2591 T 15
2592 T 20
2593 T 25
2594 T 27
2595 T 30
2356 T 8
2364 T 9
2357 T 10
2358 T 15
2359 T 20
2360 T 25
2361 T 27
2362 T 30
30508 8 mm
30509 9 mm
30510 10 mm
30512 12 mm
30513 13 mm
30514 14 mm
30517 17 mm
30519 19 mm
So
ck
et
Se
ts &
To
ol S
ets
213-piece Socket Set
Item # Size
Spark Plug Sokets
Item # Size Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
E-type
E-type
E-type
672
So
ck
et S
ets
& T
oo
l Se
ts
171-piece Socket Set
673
4380 8,0 mm
4381 10,0 mm
4382 12,0 mm
4383 PH 3
4384 PH 4
4385 PZ 3
4386 PZ 4
4387 7 mm
4388 8 mm
4389 10 mm
4390 12 mm
4391 14 mm
4440 T 40
4445 T 45
4450 T 50
4455 T 55
4460 T 60
4458 T 70
8164 T 40
8165 T 45
8166 T 50
8168 T 55
4456 T 60
4457 T 70
2625 T 5
2626 T 6
8217 T 7
2436 T 7
2439 TS 10
2440 TS 15
2441 TS 20
2442 TS 25
2443 TS 27
2444 TS 30
2445 TS 40
2431 TS 45
2635 M 5
2636 M 6
2637 M 7
2638 M 8
2639 M 9
2645 M 5
2646 M 6
2647 M 8
2385 16 mm, 12.5 (1/2)2386 18 mm, 10 (3/8)2387 21 mm, 12.5 (1/2)
10630 10 mm
10631 11 mm
10632 12 mm
10633 13 mm
10634 14 mm
10635 15 mm
10636 16 mm
10637 17 mm
10638 18 mm
10639 19 mm
10640 20 mm
10641 21 mm
10642 22 mm
10644 24 mm
10645 27 mm
10646 30 mm
10647 32 mm
10683 16 mm
10684 17 mm
10685 18 mm
10686 19 mm
10687 22 mm
6418 E18
6420 E20
6424 E24
10830 10 mm
10831 11 mm
10832 12 mm
10833 13 mm
10834 14 mm
10835 15 mm
10836 16 mm
10837 17 mm
10838 18 mm
10839 19 mm
10720 10 mm
10721 11 mm
10722 12 mm
10723 13 mm
10724 14 mm
10725 15 mm
6410 E10
6411 E11
6412 E12
6414 E14
6416 E16
2493 4,0 mm
2494 5,5 mm
2495 6,5 mm
2496 7,0 mm
2504 PH 0
2487 PH 1
2488 PH 2
2505 PZ 0
2490 PZ 1
2491 PZ 2
2497 3 mm
2498 4 mm
2499 5 mm
2500 6 mm
2589 T 8
2588 T 9
2590 T 10
2591 T 15
2592 T 20
2593 T 25
2594 T 27
2595 T 30
2356 T 8
2364 T 9
2357 T 10
2358 T 15
2359 T 20
2360 T 25
2361 T 27
2362 T 30
293
292
239
234
235
289
2232
2335
246
8203
250
251
299
276
318
319
320
10774 4 mm
10773 4,5 mm
10775 5 mm
10772 5,5 mm
10776 6 mm
10777 7 mm
10778 8 mm
10779 9 mm
10780 10 mm
10781 11 mm
10782 12 mm
10783 13 mm
10784 14 mm
10702 4 mm
10704 5 mm
10706 6 mm
10707 7 mm
10708 8 mm
10709 9 mm
10710 10 mm
6404 E4
6405 E5
6406 E6
6407 E7
6408 E8
2286
So
ck
et
Se
ts &
To
ol S
ets
171-piece Socket Set
- all parts manufactured from chrome vanadium steel- hardness and torque in accordance with DIN- with 12-point sockets and E-type sockets- 3 fine 72 tooth reversible ratchets
Item # Description
Bit Holder for 8 mm Bits, 12.5 (1/2)Bit Holder for 8 mm Bits, 10 (3/8)Spin. Handle, 6.3 (1/4)Extension Bar Wobble, 125 mm, 12.5 (1/2)
Extension Bar Wobble, 250 mm, 12.5 (1/2)
Sliding Adaptor for 12.5 (1/2) Extension Bars, 3/8 int. x 1/2 ext.Extension Bar Wobble, 50 mm, 6.3 (1/4)
Extension Bar, 100 mm, 6.3 (1/4)
Extension Bar Wobble, 125 mm, 10 (3/8)
L-Type Wrench Set, 7 piece, Int. Hex. 1, 1.5, 2, 2.5, 3, 4, 5 mmAdaptor with Retaining Ball f. 6.3 (1/4) Bits, square x hex., 25 mm
Universal Joint, 6.3 (1/4)
Universal Joint, 12.5 (1/2)
Universal Joint, 10 (3/8)
Sliding T-Bar, 6.3 (1/4)
Reversible Ratchet with Quick Release Handle, 6.3 (1/4)
Reversible Ratchet with Quick Release Handle, 10 (3/8)
Reversible Ratchet with Quick Release Handle, 12.5 (1/2)
Item # Size
Spark Plug Sokets
Item # Size Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Set Contents
Item # Size
Item #
E-type
E-type
E-type
674
176-piece Socket Set
So
ck
et S
ets
& T
oo
l Se
ts
675
8,0 mm
10,0 mm
12,0 mm
PH 3
PH 4
PZ 3
PZ 4
7 mm
8 mm
10 mm
12 mm
14 mm
T 40
T 45
T 50
T 55
T 60
T 70
T 40
T 45
T 50
T 55
T 60
T 70
8 mm
9 mm
10 mm
11 mm
12 mm
13 mm
14 mm
15 mm
16 mm
17 mm
18 mm
19 mm
17 mm19 mm21 mm
2410 10 mm
2411 11 mm
2412 12 mm
2413 13 mm
2414 14 mm
2415 15 mm
2416 16 mm
2417 17 mm
2418 18 mm
2419 19 mm
2420 20 mm
2421 21 mm
2422 22 mm
2424 24 mm
2427 27 mm
2430 30 mm
2432 32 mm
2946 16 mm
2948 18 mm
6418 E18
6420 E20
6424 E24
2370 10 mm
2371 11 mm
2372 12 mm
2373 13 mm
2374 14 mm
2375 15 mm
2376 16 mm
2377 17 mm
2378 18 mm
2379 19 mm
2600 10 mm
2601 11 mm
2602 12 mm
2603 13 mm
2604 14 mm
2605 15 mm
6410 E10
6411 E11
6412 E12
6414 E14
6416 E16
4,0 mm
5,5 mm
6,5 mm
7,0 mm
PH 0
PH 1
PH 2
PZ 0
PZ 1
PZ 2
3 mm
4 mm
5 mm
6 mm
T 8
T 9
T 10
T 15
T 20
T 25
T 27
T 30
T 8
T 9
T 10
T 15
T 20
T 25
T 27
T 30
M 5
M 6
M 8
293
292
239
234
235
289
2236
2335
246
250
299
251
276
318
319
320
2344 4 mm
2339 4,5 mm
2345 5 mm
2343 5,5 mm
2346 6 mm
2347 7 mm
2348 8 mm
2349 9 mm
2350 10 mm
2351 11 mm
2352 12 mm
2353 13 mm
2354 14 mm
2964 4 mm
2965 5 mm
2966 6 mm
2967 7 mm
2968 8 mm
2969 9 mm
2970 10 mm
6404 E4
6405 E5
6406 E6
6407 E7
6408 E8
8820
2472 16 mm, 12.5 (1/2)2464 18 mm, 10 (3/8)2470 21 mm, 12.5 (1/2)
1.5, 2, 2.5, 3, 4,
5, 6, 8, 10 mm
T10, T15, T20, T25, T27,
T30, T40, T45, T50
So
ck
et
Se
ts &
To
ol S
ets
176-piece Socket Set
- all parts manufactured from chrome vanadium steel- hardness and torque in accordance with DIN- with „Super Lock“ and E-type sockets- 3 fine 72 tooth reversible ratchets- 12 fine ratchet ring/open end spanners
Item # Description
Bit Holder for 8 mm Bits, 12.5 (1/2)Bit Holder for 8 mm Bits, 10 (3/8)Spin. Handle, 6.3 (1/4)Extension Bar Wobble, 125 mm, 12.5 (1/2)
Extension Bar Wobble, 250 mm, 12.5 (1/2)
Sliding Adaptor for 12.5 (1/2) Extension Bars, 3/8 int. x 1/2 ext.Extension Bar Wobble, 50 mm, 6.3 (1/4)
Extension Bar, 100 mm, 6.3 (1/4)
Extension Bar Wobble, 125 mm, 10 (3/8)
Universal Joint, 6.3 (1/4)
Universal Joint, 12.5 (1/2)
Universal Joint, 10 (3/8)
Sliding T-Bar, 6.3 (1/4)
Reversible Ratchet with Quick Release Handle, 6.3 (1/4)
Reversible Ratchet with Quick Release Handle, 10 (3/8)
Reversible Ratchet with Quick Release Handle, 12.5 (1/2)
Item # Size
Impact Sokets Deep
Item # Size Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Item # Size
Set Contents
Item # Size
Item # SizeItem # Size
Item #
Item # Size
Spark Plug Sokets
Ratchet Ring Spanners
Item # Profil Sizes
L-Type Wrenches Sets
E-type
E-type
E-type
201 /201
21-piece 3/4" Socket Set, 12-pt.- sizes of sockets: 19-21 - 22 - 23 - 24 - 26 - 27-30 32 - 34 - 36 - 38 - 41-46 - 48 - 50 mm- extension bars 100, 200 and 410 mm- 500 mm ratchet- 455 mm sliding bar- 12-pt. sockets
Item #1223
21-piece 3/4" Gear Lock Socket Set- sizes of sockets 19 - 21 - 22 - 23 - 24 - 26 - 27 - 29 30 - 32 - 35 - 36 - 38 - 41 - 46 - 50 mm- extension bars 100, 200 and 410 mm- 500 mm ratchet- 455 mm sliding bar- Gear Lock profile sockets, suitable for 6-pt & 12-pt screws in inch and metric size and T-STAR screws
Item #1224
So
cket Sets &
To
ol S
ets
676
201 /201
Ratchet Wrench Set- includes the following tools:- S-shape ratchet wrench, reversible, one side suitable for sockets, the other side for bits- S-shape wrench for working in "impossible" areas- 50 mm extension bar- universal joint- bit holder- 6-pt sockets 5 - 6 - 7 - 9 - 8 - 10 - 12 - 11 - 13 mm- internal hex. bits H3 - H4 - H5 - H6 - H8- T-Star bits T15 - T20 - T25 - T27 - T30- cross bits PH1 - PH2 - PH3 - PZ1 - PZ2 - PZ 3- slotted bits 4.5 - 5 - 5.5 - 7 mm
Item #2242
Sales Display, fully equipped with socket / bit sockets- 315-piece 1/2" socket & bit socket set- satin chrome finish, knurled- Internal hex. sockets, 100 mm (7 pcs each size): H7 - H8 - H10 - H12- Spline sockets, 100 mm (7 pcs each size): M8 - M10 - M12 - M14- T-Star sockets, 100 mm (7 pcs each size): T25 - T30 - T40 - T45 - T50- 6-pt. sockets (15 pcs each size): 21 and 22 mm- 6-pt sockets (10 pcs each size): 8 - 9 - 11 - 12 - 14 - 15 - 16 - 24 - 32 mm- 6-pt sockets (8 pcs each size): 27 and 30 mm- 6-pt. sockets (20 pcs each size): 10 - 13 - 17 - 19 mm- 6-pt sockets (8 pcs): 18mm- 6-pt sockets (15 pcs each size): 21 and 22 mm- dimensions of the display: (depth x width x height) 335 x 410 x 270 mm
Item #4095
So
cket
Set
s &
To
ol S
ets
677
201 /201
84-piece T-Star Tool Set, 1/4" + 1/2"- content:- 1/2" sockets for T-Star screws sizes: E12 - E14 - E16 - E18 - E20 - E22 - E24- 1/4" sockets for T-Star screws sizes: E4 - E5 - E6 - E7 - E8 - E10 - E11- 1/4" bits sockets, length 37 mm sizes: T10 - 15 - 20 - 25 - 27 - 30- 10 mm bits, length 30 mm, tamperproof sizes: T40 - 45 - 50 - 55 - 60 - 70- 10 mm bits, length 75 mm sizes: T15 - 20 - 25 - 30 - 40 - 45 - 50- 14 mm bits, length 75 mm sizes: T55 - T60- 1/4" bits, length 25 mm sizes: TS7 - TS8 - TS9 (5-sided)- 1/4" bits, length 25mm, tamperproof sizes: T10 - 15 - 20 - 25 - 27 - 30 - 40- T-Star L-type wrench sizes: T8- 10- 15- 20- 25- 27- 30- 40- 45- 50- 55- 60- E-Profile wrench sizes: E6 x E8, E10 x E12, E14 x E18, E20 x E24- T-Star screwdrivers, tamperproof sizes: T8 - 10 - 15 - 20 - 25 - 27 - 30 - 40- T-Star bits in plastic holder, tamperproof sizes: T10 - 15 - 20 - 25 - 27 - 30 - 40 - 45- 14 mm T-Star bits, 40 mm length, tamperproof sizes: T80 - 90 - 100- 1/4" to 1/4" bit adaptor- 1/2" to 10 mm bit adaptor- 1/2" to 14 mm bit adaptor- magnetic pickup tool
Item #7849
Pipe Socket Wrench Set, 6x7 - 20x22 mm, with hole- forged type- sizes: 6x7 - 8x9 - 10x11 - 12x13 - 14x15 16x17 - 18x19 - 20x22 mm- especially suitable for loosening / tightening nuts on long threaded rods- thick-walled design for higher torque transmission- incl. drive pin- in tetron wallet
Item #30420
So
cket Sets &
To
ol S
ets
678
201 /201
21-piece 1/2" 12-pt. Socket Set, 8-36 mm- sizes: 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 24 - 27 - 30 - 32 - 34 - 36 mm
Item #2267
13-piece 1/4" 12-pt. Socket Set, 4-14 mm- 4 - 4,5 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 mm- on metal rail
Item #2269
10-piece Automotive Special Sockets, 3 - 5 - 6 and 10-pt- M10S, 6pt., for Toyota idle wheel centre screw- M6S, 6pt., for Nissan & Renault clutch- M8S, 6pt., for Nissan cylinder head & balance shaft- M12S, 6pt., for Nissan cylinder head- 8TS, 3pt., for Nissan balance shaft- 10 mm, 5pt., for brake systems- 12 mm, 5pt., for Nissan fuel pump- 14 mm, 5pt., for GM & Smart Car- 19 mm, 5pt., for Peugeot, Renault & Citroen parking brake- 20 mm, 10pt., for Honda Civic lower control arm- length: 38 mm
Item #2560
Spark Plug Socket with Rubber Insert- 12-pt. type, forged- satin chrome finish
Item # Description2385 1/2" Spark Plug Socket with Rubber, 16 mm2386 1/2" Spark Plug Socket with Rubber, 21 mm2387 3/8" Spark Plug Socket with Rubber, 18 mm
So
cket
s
679
201 /201
3-pt Socket Set for Barriers, M5 - M12- sizes: M5 - M6 - M8 - M10 - M12- satin chrome finish- knurled- 1/2" drive- suitable for VAG TDI injectorpump adjuster, Bosch injectors, control cabinets and barriers
Item # Description8608 5-piece 3-pt Socket Set for Barriers, M5 - M12 (8 - 16,5 mm)7460 3-pt Socket for Barriers, M5 (8 mm)7461 3-pt Socket for Barriers, M6 (10 mm)7462 3-pt Socket for Barriers, M8 (12 mm)7463 3-pt Socket for Barriers, M10 (15 mm)7464 3-pt Socket for Barriers, M12 (16,5 mm)
Stud Bolt Extractor, 6 - 19 mm- for loosening stuck studs- suitable for loosening and tightening- suitable for studs diameter from 6 to 19 mm- knurled and hardened clamp wheel
Item #8799
1/2" Impact Socket, 21 mm- black phosphate finish- with groove and hole for retaining ball
Item #5221
1/2" Special Socket for Wheel Locking Nut on MB S-Class- phosphated- with groove and hole for retaining ball
Item #2255
So
ckets
680
201 /201
1/2" Impact Socket, 39 mm, 12-pt.- phosphated- meets DIN standards- with groove and hole for retaining ball
Item #5351
7-piece 1/4" TX Ball Head Bit Socket Set- perfect for working in tight spaces- sizes: T10 - T15 - T20 - T25 - T27 - T30 - T40- length: 130 mm
Item #8618
Automatic Bit Holder, 1/4"- shaft rotates in a plastic-coated metal sleeve, allowing you to hold the bit holder when working
Item # Description1723 Automatic Bit Holder, 1/4", 600 mm1724 Automatic Bit Holder, 1/4", 450 mm1734 Automatic Bit Holder, 1/4", 80 mm1735 Automatic Bit Holder, 1/4", 150 mm1736 Automatic Bit Holder, 1/4", 300 mm
10-piece Impact T-Star Sockets, T20 - T70- for use with air tools- includes the following sizes: - T20 - T25 - T27 - T30 - T40 - T45 - T50 - T55 - T60 - T70- 1/2" drive
Item #5097
So
cket
s /
Bit
-So
cket
s, B
its
& a
cces
sori
es
681
201 /201
12-piece T-Star Bit Socket Set, extra short, T8 - T60- 1/4": T8 - T10 - T15 - T20 - T25 - T27, length 30 mm- 3/8": T30 - T40 - T45 - T50 - T55, length 38 mm- 1/2": T60, length 48 mm- knurled- satin chrome finish- on metal rail
Item #5098
10-piece Internal Hexagon Bit Sockets, 4 - 19 mm, extra short- 1/4": 4 - 5 - 6 - 7 - 8 mm, length 30 mm- 3/8": 10 - 12 - 14 mm, length 38 mm- 1/2": 17 - 19 mm, length 48 mm- knurled- satin chrome finish- on metal rail
Item #5099
T-Star Bit, T35, 1/4"- material: S2- suitable for VW & PSA lambda probe- length: 30 mm
Item #4735
T-Star Bit, tamperproof, T35, 1/4"- material: S2 Stahl- length: 30 mm
Item #4736
4-piece Alternator Tool Set- for dismantling alternators- includes following tools: - T-Star-bit T50, 64 mm length with 12 mm outer hex and retaining ball - Spline bit M10x12mm x 64 mm length with 12 mm outer hex and retaining ball - 33-teet socket with 15 mm outer hex - 12 mm ratchet ring / open end spanner
Item #4249
Bit-S
ockets, B
its & accesso
ries
682
201 /201
1/2" Internal Hexagon Bit Socket, 11 mm, 100 mm long
Item #4266
1/4" T-Star Bit Socket, T35, 75 mm- knurled- satin chrome finish
Item #2565-75
T-Handle- ergonomically designed handle- satin chrome finish
Item # Description7802 T-Handle 3/8" Square, 230 mm length7805 T-Handle 1/2" Square, 230 mm length7800 T-Handle 1/4" Square, 180 mm length
Special Extension Bars- especially suitable for difficult to access screws- allows eccentric transmission- useful for e.g. screws on front engine covers on transverse-mounted engines and other applications
- gives you 265 mm extension
Item # Description8616 1/4" Special Extension Bar8617 3/8" Special Extension Bar
Bit
-So
cket
s, B
its
& a
cces
sori
es /
Rat
chet
s, E
xten
sio
n B
ars,
Ad
apto
rs &
mo
re
683
201 /201
Bit Ratchets- for adapter-free operation of bits
Item # Description353 Bit Ratchet for 10 mm Bits354 Bit Ratchet for 1/4" Bits
Quick Adjusting Swivel T-Handle, 310 mm- allows turning the handle swiftly by holding the sleeve during operation- guide sleeve position is adjustable- material: chrome vanadium / anodized aluminum
Item # Description8755 1/4" Quick Adjusting Swivel T-Handle, 310 mm8756 3/8" Quick Adjusting Swivel T-Handle, 310 mm8757 1/2" Quick Adjusting Swivel T-Handle, 310 mm8758 Quick Adjusting Swivel T-Handle for 1/4" Bits, 310 mm
Reversible Ratchet- square drive is lockable, thus suitable for very sessile nuts / bolts
Item # Description8810 1/4" Reversible Ratchet, 150 mm8811 3/8" Reversible Ratchet, 200 mm8812 1/2" Reversible Ratchet, 250 mm
8-piece Combination Spanner Set, Small Type, 4 - 10 mm- especially suitable for tight spaces- ring side 20° offset- sizes: 4 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 mm
Item #8646
Ratchets, E
xtension B
ars, Ad
apto
rs & m
ore / S
panners &
Ratchet W
renches
684
201 /201
Open Ring Spanner, 8 x 9 mm- for installation of pipe couplings- satin chrome finish
Item #1745-8X9
Double Ring Spanner Set, 8 - 19 mm, extra long- 8x10 - 11x13 - 14x15 - 16x17 - 18x19- straight type- chrome-plated- in pouch
Item #1187
V-Belt and Timing Belt Wrench Set, 13-19 mm- 13, 15, 16, 17, 19mm; length: 460 mm- 12-point head- double angled for better reach of confined areas- with slip guard handle for easy handling- matt chrome plated finish
Item #1314
8-piece Internal Hexagon Screwdriver Set- 2-component handle with non-slip handle- includes following sizes: H1.5 x 75 mm, H2.0 x 75 mm, H2.5 x 75 mm, H3.0 x 100 mm, H4.0 x 100 mm, H5.0 x 150 mm, H6.0 x 150 mm, H8.0 x 200 mm
Item # Description8629 8-piece Internal Hexagon Screwdriver Set8629-8 Internal Hexagon Screwdriver, H8.0 x 200 mm8629-7 Internal Hexagon Screwdriver, H6.0 x 150 mm8629-6 Internal Hexagon Screwdriver, H5.0 x 150 mm8629-5 Internal Hexagon Screwdriver, H4.0 x 100 mm8629-4 Internal Hexagon Screwdriver, H3.0 x 100 mm8629-3 Internal Hexagon Screwdriver, H2.5 x 75 mm8629-2 Internal Hexagon Screwdriver, H2.0 x 75 mm8629-1 Internal Hexagon Screwdriver, H1.5 x 75 mm
Span
ners
& R
atch
et W
renc
hes
/ Scr
ew D
river
s &
Key
Set
s
685
201 /201
Carburetor Screwdriver with Shaft- facilitates the adjustment of carburetor kits, particularly suitable for work in tight spaces such as motorcycles- suitable for slotted screws- slot size: 1 x 5 mm- adjustable depth stop 0 - 5.5 mm- marked, lockable knurled sleeve for detecting the rotational range- length: 470 mm
Item #4842
9-piece Special Internal Hexagon Key Set, 1.5 - 10 mm- special profile for rounded-off 6-pt. screws- 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 8 - 10 mm- in folding holder
Item # Description8512-1 Demo Block for Hex Key Set BGS 85128512 9-piece Special Internal Hexagon Key Set, 1.5 - 10 mm
12-piece Pin Driver Set, including Chisel + Punch- heavy duty type with hex shaft- forged carbon steel- 6 different flat chisels: 14.5 mm x 145 mm to 19 mm x 250 mm- 3 4.5 x 250, 6.5 x 180 and 8 x 250 mm- 1 drift punch 9.7 x 200 mm- 2 punch 150 mm and 200 mm long- in storage bag with suspension eyelets
Item #1657
5-piece Left Cutting Drill Set- sizes: 3 - 5 - 6 - 8 - 10 mm- titanium coated
Item #2731
Screw Drivers & Key Sets / Ham
mers, Drills, Scissors, Cutters
686
201 /201
10-piece Screw Extractor Set- allows removal of screws with demaged head- suitable for Allen, T-Star, Spline screws- extractor with 6-pt. drive in following sizes: 3 - 4 - 5.5 - 6 - 7 - 8 - 9 - 10 and 11 mm- also suitable for screws in inch sizes: 1/8" - 5/32" - 3/16" - 7/32" - 1/4" - 9/32" - 5/16" - 11/32" - 3/8" and 13/32"- 13 mm 6-pt. drive
Item #8547
25-piece Screw Extractor Set- allows removal of screws with damaged head- suitable for Allen, T-Star, Spline screws- extractors with 6-pt. drive in following sizes: 3 - 4 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 13,5 - 14 15 - 16 - 17 - 17,5 - 18 -19 - 20 - 21 - 21,5 and 22 mm- also suitable for screws in inch sizes: 1/8" - 5/32" - 3/16" - 7/32" - 1/4" - 9/32" - 5/16" - 11/32" 3/8" - 11/32" -7/16" - 15/32" - 1/2" - 17/32" - 9/16" 19/32" - 5/8" - 21/32" - 11/16" - 23/32" - 3/4" - 25/32" 13/16" - 27/32" and 7/8"
Item #8548
6-piece Screw Extractor Set- for extracting broken screws- sizes: 1 - 2 - 3 - 4 - 5 and 6- 4-pt. drive for tool holder
Item #8549
4 Size Drill Chuck Wrench- for most drill chuck sizes- suitable for AEG, Bosch, Skil, B&D, Makita, Milwaukee etc.
Item #8625
Ham
mer
s, D
rills
, Sci
sso
rs, C
utte
rs
687
201 /201
7-piece HSS Rotary Burrs Set- suitable for drilling and milling machines- for grinding and shaping wood, plastic, aluminum, copper, etc.- includes the following milling heads: 1 spherical 2 conical 2 cylindrical 2 cylindrical with ball head- shaft diameter: 6 mm- made from HSS 6542 steel- max. speed: 30,000 rpm
Item #8626
Ratcheting Tool Holder- for clamping taps- left and right side ratchet function, reversible- works with sliding bar, 17 mm socket or 3/8" ratchet- suitable for taps up to M12 or 1/2"
Item #8652
Safety Cutter- knife blade is withdrawn in the housing by spring mechanism when not in use- very helpful and safe for opening of cardboards- replaceable blade
Item #50608
Angled Drill Head with Keyless Chuck- with handle for fatigue-free working- suitable for 1.5 to 10 mm drills- diameter of drive shaft: 9.5 mm
Item #8621
Pipe Reamer- for outside and inside deburring of metal pipes- suitable for pipe internal diameter of 3 to 12 mm and pipe outside diameter of 4 to 14 mm- inside cutter retractable, nickel-chromium-molybdenum alloy- outside cutter made of HSS steel
Item #8732
Ham
mers, D
rills, Scisso
rs, Cutters
688
201 /201
3-piece File Set, 200 mm- blade profile: flat hand - half round - round- plastic handle (blue)- cut 2
Item #50210
3-piece Rasp Set, 200 mm- blade profile: flat hand - half round - round- plastic handle (blue)- cut 2
Item #50235
Mallet with Fibreglass Shaft , Head Ø 35 mm- plastic heads- 2-component handle
Item #52326
Drill Grinding Attachementfor twist drills 3-19 mm
Item #3200
Ham
mer
s, D
rills
, Sci
sso
rs, C
utte
rs
689
201 /201
Needle Pliers, 175 mm- for bending and shaping and grasping wire- self opening spring mechanism
Item #341
Hose Clamp Pliers- specifically made for space-saving hose clips- ratchet mechanism for holding hose clips open- suitable for most vehicles such as Alfa Romeo, Citroen, Fiat, Ford, Hyundai, Lancia, Mercedes, Opel, Peugeot, Porsche, Renault, Seat, Skoda, Toyota, Volvo, etc.- especially suitable for new type hose clips on VAG fuel lines
Item #8600
130 mm Stainless Steel Sharp Tip Tweezer, straight- especially useful for bonding and loosening car wrapping, stickers, etc.
Item #8620
Cable Stripper, 215 mm- for stripping cables: 0.5 - 0.65 - 0.8 - 1.0 - 1.3 - 1.6 - 2.0 mm 12 - 14 - 16 - 18 - 20 - 22 - 24 AWG and 6 mm coaxial cables- for crimping non-insulated terminals 0.3 - 0.5 - 1.25 - 2.0 mm- specially hardened carbon steel
Item #8643
Glow Plug Pliers- for removing electrical connectors on glow plugs- double joint mechanism- long version
Item #8662
Pliers &
Sp
ecial Pliers
690
201 /201
Pliers for Self-Locking Metal Bands- for tightening of self-locking metal bands installed on e.g. axle boots- suitable for metal bands up to max. 10 x 0.4 mm
Item #439
Open Terminal Crimping Jaws for Art. 1410 / 1411- suitable for non-insulated open terminals, sizes AWG 20-18 / 16-14 / 12-10 or 0.5-1.0 / 1.5-2.5 / 4.0-6.0 mm ²
Item #1410-C
Swedish Side Cutters, 165 mm- non-slip 2-component grips, blue-black
Item #344
3-piece Pliers Set- non-slip, 2-component handles- consisting of: 180 mm combination pliers 200 mm long nose pliers 165 mm side cutter- in storage bag
Item #8664
Plie
rs &
Sp
ecia
l Plie
rs
691
201 /201
Long Nose Pliers, straight- non-slip 2-component grips, blue-black
Item # Description345 Long Nose Pliers, straight, 160 mm347 Long Nose Pliers, straight, 200 mm
Combination Pliers- non-slip 2-component grips, blue-black
Item # Description348 Combination Pliers, 160 mm349 Combination Pliers, length 180 mm351 Combination Pliers, length 200 mm
3-piece Hose Clamp Pliers Set- for clamping rubber hoses, e.g. brake, fuel and coolant hoses- approx. 30° angled- suitable for tube Ø10, Ø15 and Ø24 mm- fiberglass composite material
Item #8764
Plastic Rivet Kit- for riveting e.g. plastic panels in the vehicle interior- includes: - 1 riveter - 40 plastic rivets in following sizes: - 10 Ø5,0 x 15,8 mm - 10 Ø5.0 x 17.2 mm - 10 Ø6.6 x 17.2 mm - 10 Ø6.3 x 25.2 mm
Item # Description8463 Plastic Rivet Kit8463-1 Plastic Rivets Set for BGS 8463, 5.0 x 15.8 mm, 10 pcs.8463-2 Plastic Rivets Set for BGS 8463, 5.0 x 17.2 mm, 10 pcs.8463-3 Plastic Rivets Set for BGS 8463, 6.6 x 17.2 mm, 10 pcs.8463-4 Plastic Rivets Set for BGS 8463, 6.3 x 25.2 mm, 10 pcs.
Pliers &
Sp
ecial Pliers
692
201 /201
CLIC Type Collar Pliers with Swivel Head- heads can rotate 360°, for lateral pre-tensioning of hose clamps- lenght: 205 mm
Item #499
Axle Boot Kit Clamp Pliers for VAG, Mercedes, Toyota- suitable for progressively adjustable clamps (without lug holding down device) installed on axle boots on VAG, Mercedes und Toyota- special claws for easy application- automatic opening
Item #479
Plie
rs &
Sp
ecia
l Plie
rs
693
201 /201
- suitable for VAG models- 1 step drill- 1 drill guide with guide- 1 tap- 1 Wrench- 10 threaded inserts
- suitable for - metric bubble flaring (5/32''), 6 mm, 8 mm, 10 mm - 45 degree double flaring 3/16'', 1/4'', 5/16'', 3/8'', 1/2'' - GM fuel line forming 5/16'', 3/8'' - push-connect forming 1/4'', 5/16'', 3/8''- includes various sizes of dies and adapters for working on flaring tubes of GM fuel lines, brake lines, transmission lines and air condition lines- hydraulic pump for easy use
- special tool for creating standard 90° flares as well as open F-type and double E-type flare (single and double lap flares)- suitable for pipes with wall thickness up to 1mm- 1 pipe clamp- 1 spreader- 7 dies 4.75 - 5 - 6 - 8 - 10 mm, 1/4", 1/2"
201 /201
- for removal of spring plates on brake shoes- self-opening
- particularly suitable for cleaning aluminum parts such as on brakes
- suitable for working on pipe screws eg. brake lines, servo lines, oil cooler pipes, etc. - ratchet function when moving the wrench head- sizes: 10 - 11 - 13 - 17 - 19 - 22 mm - material: head made of Cr-Mo, black finished, handle made of hardened steel, chrome plated
- includes following diameters: 2.4 - 2.8 - 3.2 - 3.6 - 4.0 - 4.4 - 4.8 - 5.2 5.6 - 6.0 - 6.4 - 6.7 - 7.1 - 7.5 - 7.9 - 8.3 8.7 - 9.1 - 9.5 - 9.9 - 10.3 - 10.7 - 11.1 11.5 - 11.9 - 12.3 - 12.7 - 13.5 mm- length: 123 mm- material: carbon steel- without handle (straight type)- in metal holder- with painted tip
201 /201
- for a clean oil change- usable for engine, transmission, rear axle oil and other non-corrosive liquids- 5 l container for accommodating the fluids- suitable for oil extraction on all Smart models and also for all other vehicles when an oil change is performed without using a car lift- with a special brake breather hose and 2 extraction hoses- working pressure: 4.9 to 11.9 bar- air connection: 1/4"
- for quick and easy brake bleeding- can be used by one person only- large 1.5 l canister with aluminium nozzle and clamp for compressed air (lets you keep both hands free)- protects the main brake cylinder as no pumping required- can also be used for hydraulic clutches- 1000 mm silicone hose guarantees a long product life time- accurately fitting rubber adaptor for the bleeding nipple - 1 l canister with shut-off valve and universal clamp for refilling the brake system
- for refilling brake fluid while brake bledding- with valve and clamp- container size: 1 liter- also spare parts for BGS 8080
201 /201
- for measuring the brake disc thickness, tire tread depth etc.- material: aluminum- dimensions: 182 x 115 x 13 mm
- for bleeding brake systems without removing the wheels- ratchet wrench makes loosening and tightening easy- hose remains on bleeding screw while loosening and tightening- 6 special sockets: - 9 x 29 mm - 9 x 75 mm - 10 x 29 mm - 10 x 75 mm - 11 x 29 mm - 11 x 75 mm- incl. bleeding hose with 4 mm inner diameter
- allows quick and easy push back of brake pistons on front and rear axles floating calipers without hand brake function- suitable for most car models- 41 mm pressure plate diameter- size of support plate: 101 x 44 mm- dimensions: 195 x 195 mm
- 3 pin type- suitable for brake piston wind-back tool sets BGS 1109, 1110, 1116, 1119, 1127, 1117, 1104- suitable for e.g. the following vehicles: Ford Focus, C-Max, S-Max Renault Scenic, Megane Iveco Daily Volvo V70
201 /201
- pulling depth up to approx. 140 - 210 - 280 mm, pulling width: 40 mm up to max. 135 mm- puller legs are suitable for 2- and 3-leg crossbars (included)- free moving legs allow internal and external pulling operations- hardened pulling feet (width approx. 33 mm, thickness approx. 5.2 mm)- spindles with fine thread
- comprehensive kit for fast and effective removal and installation of wheel bearings & suspension bushes- reduces the possibility of damaging the bearing and housings- supplied with four stepped end plates- 4 screws: M10 x 1.5 - M12 x 1.5 - M14 x 1.5 M16 x 1.5 mm, 450 mm long- plates and sleeves can also be used in a common workshop press- sleeve wall thickness: 5 mm- sleeve height: 94 mm- sleeve outer diameter: 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82 mm- counterholding plates : Ø 83 x 20 mm
201 /201
- for renewing rubber suspension bushings- suitable for BMW models: - 1 Series: E81, E87 - 3 Series: E36, E46, E83, E90, E91, E92, E93 - 5 Series: E60, E61 - 6 Series: E63, E64 - 7 Series: E38, E65, E66, E67 - 8 Series: E31 - Z4 Series: E85, E86 - MINI COOPER S: R53
- opening: 23 mm- max puller width: 45 mm- drive: 19 mm 6-point- suitable for impact wrench use
- opening: 62 mm- max puller width: 100 mm- 3/4" square drive- suitable for impact wrench use
- this extension tool allows a disassembly and assembly of the ball joints- suitable for Mercedes W211, W220, W230- to be used as OEM 2113230068- material: S45C steel- works with BGS 8293
201 /201
- for loosening / tightening of suspension joints- suitable for models: Citroen BX (9/82-94), C5, Xantia Peugeot 305 (7/82-90), 405 (6/87-), 406, 605, 607 etc.
- for proper and quick installation of rubber bushings (silent blocks) on front axle brackets- suitable for Audi A2, VW Polo IV 9N (02-05), Skoda Fabia I, Seat Ibiza 6L (02-06) and Cordoba from 2002- material: S45C steel- to be used as OEM 3062, 3253/8, T10037
- for assembly / retraction of drive shafts- universally usable by rich adaptation options- suitable for e.g. the following vehicles: VAG, Mercedes, BMW, Porsche, Peugeot, Renault, Opel / Vauxhall- includes the following tools: - flange nut - sleeve, OD 39 mm, ID 29 mm - sleeve, OD 46 mm, ID 36 mm - spindle M14x1.5 outer thread - spindle M16x1.5 inner thread - spindle M16x1.5 outer thread - spindle M18x1.5 inner thread - spindle M20x1.5 inner thread - spindle M22x1.5 inner thread - spindle M24x1.5 inner thread - spindle M27x1.5 inner thread - spindle M30x1.5 inner thread
- for locating of defectives on axles, such as defective ball joints, wheel bearings, etc.- suitable for fault diagnosis with loaded axle (as in normal operation)- testing is done by visual, acoustical and tactile sense verification- especially suitable when car is mounted on 4-post lift but also usable on the workshop floor- 1/2" drive for use with sliding bar- overall length: 355 mm- dimensions of the plastic coating: Ø 60 x length 265 mm
201 /201
- for shock absorber nuts- suitable for nearly all vehicles, incl. Japanese gas shock absorbers- includes: - extention socket - rotating plate with 39 and 34 mm outer 6-pt. - rotating plate with 60 mm inner 6-pt. - 90° rotation plate, universal - 120° rotation plate for Japanese cars - 4 holding plates with 4-pt. head - 4 holding plates with round head - 4 screws M6 x 18 - 4 mm int. hex. wrench - 3 socket for grooved nuts with 22 mm 6-pt. drive in following sizes: - 10.5 mm inner diameter with 3.5 mm pin - 12.5 mm inner diameter with 3.5 mm pin - 14,5 mm inner diameter with 3.5 mm pin
- allows one-person adjusting- reduces the required time- pressure width 135 to 175 mm- 22 mm 6-edge spindle- 3 spindle lengths for a wide range of applications 75 mm for Seat Toledo - VW Jetta, Golf, etc. 85 mm for Seat Cordoba - VW Polo 95> 115 mm for Chrysler Voyager, etc.
- for precisely aligned mounting of the subframe- needed e.g. for replacing the rubber bushings and all jobs for which the auxiliary frame (subframe) is removed- suitable for VW T5 from 2004- to be used as OEM T10227
201 /201
- suitable for removal and installation of brake discs on front and rear wheel drive vehicles- external thread M24 x 2.0- incl. adapter for sliding hammer, internal thread M24x2.0 to internal thread M20x1.5- to be used as OEM 204-345B
- for non-damage mounting of bearings and sealing rings- includes 34 nylon and 3 metal mounting sleeves- suitable for most bearings- includes the following pressure piece sizes: 10-26 mm / 10-30 mm / 10-35 mm 12-28 mm / 12-32 mm / 12-37 mm 15-32 mm / 15-35 mm / 15-42 mm 17-35 mm / 17-40 mm / 17-47 mm 20-42 mm / 20-47 mm / 20-52 mm 25-47 mm / 25-52 mm / 25-62 mm 30-55 mm / 30-62 mm / 30-72 mm 35-62 mm / 35-72 mm / 35-82 mm 40-68 mm / 40-60 mm / 40-90 mm 45-75 mm / 45-85 mm 50-80 mm / 50-90 mm- pressure disc sizes: 45-100 mm / 50-110 mm
- suitable for following VAG models: - Audi A2 - VW Lupo - Polo - Fox - Seat Ibiza - Skoda Fabla- fIts on 62, 66 and 72 mm bearing unit- works direct on the vehicle- minimizes the working time- simple and safe handling- can also be optionally used with a workshop press- includes following tools: - 1 universal pressure bell - 3 pressure pieces - 1 spindle unit with ball bearing - 2 half shells (black) for 72 mm bearing - 2 half shells coupling (chrome), for 66 mm bearing - 2 half shells coupling (anodized), for 62 mm bearing
201 /201
- facilitates assembly and disassembly of front wheel hub-bearing unit- suitable for following models: Ford Focus 2 as of 2004, C-Max as of 2003 Volvo C30 as of 2006, C70 Cabriolet as of 2006, S40 as of 2004, V50 as of 2004, Mazda 3 (BK) 1.4 / 1.6 /1,6 Turbo as of 2003- contents: - 1 pressure plate - 4 pressure bolts - 2 screws - 1 pair of disassembly shells - 1 disassembly pressure piece - 1 pair of mounting shells - 1 mounting pressure piece - 1 high-strength, ball bearing spindle
- for replacing wheel bearings on Mercedes cars- suitable for following models: 190 (W201), A-Class (W168, W169), B-Class (W245), C-Class (W202, W203), E-Class (W210, W124), M-Class (W163, W164), S-Class (W140), V-Class (W639)- includes all tools for disassembly and assembly of wheel bearings
- for replacing wheel bearings on VAG models- suitable for following models: Audi A3 (8L), A4 (B5), A4 Quattro (B6) Rear Axle Audi A6 (4A, 4B), A8 (4D, 4E), TT (8N, 8y) VW Polo (6N), Golf (II, III, IV), Passat, Sharan, T4- includes all tools for disassembly and assembly of wheel bearings
201 /201
- for replacing wheel bearings on Peugeot, Citroen, Renault models- includes all tools for disassembly and assembly of wheel bearings
- for renewing the rear control arm bushing- suitable for Mercedes W210 (E-Class) models
- for renewing the rear control arm bushing- suitable for Mercedes W140 (S-Class) models
201 /201
- for renewing the rear control arm bushing- suitable for all Mercedes W170 (SLK) and W202 (C-Class) models
- facilitates assembly and disassembly of front wheel hubs- for use with workshop hydraulic press- suitable for Audi models: A4 / S4 QuattroAvant 2001-2008 A6 / S6 QuattroAvant 2002-2005 A8 / S8 QuattroAvant 2004-2007, R8 since 2007- 1 pressure plate- 5 push pins- 1 pair of disassembly shells- 1 disassembly pressure piece- 1 mounting sleeve
- allows easy mounting of rubber bearings and bushings- suitable for most cars, SUV, Pick Ups, etc.- contents: - 10t hydraulic cylinder - 2 pointed bushes, length: 28 mm and 95 mm - 4 fixing spindles, M10x1.5 - M12x1.75 - M14x2.0 - M16x2.0 - 4 pulling spindles, M10x1.5 - M12x1.75 - M14x2.0 - M16x2.0 - 22 short bushs, length: 40mm - 22 long bushs, length: 110mm Dimensions of the bushings (O.D. x I.D.) 26x18, 28x20, 30x22, 32x24, 34x26, 36x28 38x30, 40x32, 42x34, 44x36, 46x38, 48x40 50x42, 52x44, 54x46, 56x48, 58x50, 60x52 62x54, 64x56, 66x58 und 68x60 mm
201 /201
- suitable for mounting bearings and sealing rings- particularly useful when used with a hydraulic press- this kit includes 17 mounting pads Ø 70 to 150 mm (5 mm steps)- 273 mm metal handle for use with a hammer- material: carbon steel
- for easy and gentle replacing of rear axle bushes on BMW models E36, E46, E85- consists of disassembly and assembly pressure pieces, ball bearings, high-strength spindle
- for renewing the rear ball joint bushes- suitable for 5 Series E39, 7 Series E38- includes: - high-strength spindle - hexagon nut with collar - dismantling pressure sleeve - dismantling holding sleeve, with bearing - assembly holding sleeve - mounting pressure sleeve
201 /201
- for removal, installation and alignment of rear axle bushes on Renault Laguna II- material: S45C steel, zinc finish
- prevents damage to new bushings- disassembly of the trailing arm is not required- simplifies installation and reduces installation time- contains: disassembly and assembly pressure piece, counter holding sleeve, counter holding sleeve plate, mounting ring and tool for biasing the bushing- suitable for BMW (after 2007) E85, E89, E92
- for removal of the front wheel bearing unit and for removing the wheel hub- allows renewing of the camp without replacing the wheel hub- consisting of: - puller with retaining key - screw set (5 pcs.) - pressure plate (large) - pressure plate (small) - spindle with hex. drive
201 /201
- drop forged- chrome finish
Art. 7741- bolt size: Ø 9,5 x 125 mm- bolt thread: 3/8" x 24 UNF- body thread: 3/8" x 16 UNC
Art. 7749- bolt size: Ø 12,7 x 135 mm- bolt thread: 1/2" x 20 UNF- body thread: 3/8 " x 16 UNC
Art. 7742- bolt size: Ø 16 x 165 mm- bolt thread: 5/8" x 18UNF- body thread: 1/2" x 13UNC
BGS 8767- bolt size: Ø 19 mm, 260 mm- bolt thread: 3/4" x 16 UNF- body thread: 5/8" x 11 UNC
BGS 8768- bolt size: Ø 25.5 mm, 350 mm- bolt thread: 1" x 12 UNF- body thread: 3/4" x 10 UNC
- with handle for safe and fatigue-free working- flat chisel with oval surface- 15 ° angled chisel with oval surface- 90 ° angled chisel with oval surface- regrindable surface- hardened special steel
201 /201
- especially designed for spot weld drilling in most materials- drills contained: Ø 6.5 mm, 8.0 mm and 10.0 mm- 3 cutting edges (one more than usual) facilitate and speed up drilling- centering tip prevents a walking of the drill- especially suitable for body repair shops
- especially designed for spot weld drilling in most materials- drills contained: Ø 6.5 mm, 8.0 mm and 10.0 mm- special HSS Cobalt steel prevents dulling by overheating- centering tip prevents a walking of the drill- especially suitable for body repair shops
- to protect the dashboard when e.g. removing the windshield- includes: - protection panel, slightly rounded lip, L205 x B265 mm - protection panel, straight, L205 x B265 mm - protection panel, slightly rounded lip, L305 x B455 mm - protection panel, straight, L305 x B455 mm- with handle
201 /201
- 4 support arms movable in height and position- rotatable mounting axis for the support arms- 2 swivel casters for easy positioning- dimensions: 1420 x 900 x 1110 mm
- for cutting out glued windows- braided from three stainless steel wires- length: 25 m- thickness: 0.9 mm- suitable as replacement wire for e.g. BGS 8004
- for repairing rusted wiper arm shafts- replacement of wiper arm mechanism is not required- saves repair costs
- minimizes repair coast and allows professional drilling out of nozzle residues from the wiper arm shaft and of brass pipe out of wiper motors- includes: - guid bushing for mounting on wiper axle - 3 drills, of wich 2 with guide support - 10 plastic pipes as brass pipe replacement- suitable for following VAG models: VW Golf IV, Passat, Sharan, Audi A4, Ford Galaxy, Seat Alhambra
201 /201
- for supporting of dent rods- can be used with BGS 1639, 1642 and 1659- material: Inox
- suitable for removing of e.g. panels, glued trim parts and wheel weights- flat and round head chisels, 127 and 175 mm length- handle end is designed to be used with a hammer
- for removal of trim, paneling, etc.- allows a damage-free disassembly, even on painted surfaces- wide range of application through different scraper and removal tool profiles, such as: - scraper with trim guide - slotted lever, angled and straight - disassembly lever, angled and straight, in different widths
- for expanding the fender size- is often required when lowering the vehicle and changing the wheel-tire combination- telescopic boom arm with 180° swiveling pressure roller- suitable for mounting on 4- and 5- bolt wheel hubs- fits on cars with pitch circle diameters from 95 to 120 mm- weight: 7500g
201 /201
- for edge coiling of sharp fender inner edges, preventing damage to tires when cushioning- jaw protectors for smooth application- is required for e.g. lowered vehicles or when changing the wheel / tire combination- a dismantling of wheels can be omitted in most cases
- is required for lifting and mounting of windshields- maximum capacity: 80 kgs- suction cup diameter: 115 mm- toggle lever suction device
- is required for lifting and mounting of windshields- high load capacity of 95 kg- suction cup diameter: 115 mm- toggle lever suction device
- when using the pump the hammer creates a vacuum and causes the vacuum pad firmly holds on to the body- dents can now easily be removed by working the sliding hammer- independent of compressed air systems- 3 replaceable strainers: Ø 70 mm, Ø 100 mm, Ø 125 mm
201 /201
- useful for body work such as fitting doors, fenders and other body parts- includes 3 gauges with 10 gauge blades each, 1 mm thickness
- for pushing out small dents, e.g. hail damage, etc.- made of plastic, front rounded
- for piercing rubber, plastic, etc.- hardened tip- plastic handle, black- length: 175 mm- shaft length: 70 mm
- for fast and easy fixing during glueing and welding of sheet metal parts- for time- and cost-saving body work- the economical alternative to conventional locking pliers with advantage in size- re-adjustment of sheet metal is possible at any time- pliers in an angled shape allow access even in difficult places such as door pillars, quarter window- includes 10 universal steel clamps- clamp opening: 0 to 5 mm
201 /201
- for repairing cracks in plastic parts bigger than 1 mm thickness- suitable for plastic material with max. 40% glass fiber content- for repairing plastic bumpers, panels, brackets, etc.- includes repairing clamps in V-shape 0.6 mm , U-shape 0.6 mm and U-shape 0.8 mm- this tools heats up the clamps to a temperature between 100 and 200° C so that they can connect the breaking points and bring back stability- can also be used for enforcing strongly used areas- includes: heating unit, charger, battery
- very useful for transporting and storing screens and tools- 3 shelf levels, plate size: 500 x 380mm- dimensions: - height: 940 mm - width: 685 mm - depth: 435 mm- 4 rubber pads for safe storing of windshield- 4 swivel castors, 2 with brakes- 2 handles- made of lightweight plastic- max. capacity: 50 kg
- suitable for DIN 1804 nuts and DIN 981 bearing nuts- for diameters: 35-60, 60-90, 90-120 mm- hook and pin lug are interchangeable
201 /201
- special design for installing lambda probes- wrenches with different offset angles for difficult-to-access lambda probes- sizes 19 and 22 mm- material: chrome vanadium- satin chrome finish
- short, handy type- suitable also for use with extension tube
- length 44 mm- milled, D17 mm x W20 mm- suitable for 2.0/2.2 HDI engines on Citroen, Ford, Lancia, Land Rover, Volvo, Peugeot
- for restoring of wheel stud threads, sizes: M12x1.25 - M12x1.5 - M14x1.5- unique design allows the two halves of the thread restorer to be fitted on the good thread and wound back over the damaged thread, which is normally at the end of the stud- consisting of 3 thread restoring tools and special holder
201 /201
- allows professional removing of rim locks- "open" almost all rim locks without damaging the rim- conical dismantling sleeves for high power transmission- the kit includes: - dismantling sleeves: Ø30.9 - Ø30.0 - Ø31, 8 - Ø28, 9 - Ø28.0 - Ø27.0 - Ø26.0 - Ø28.8 mm, 60 mm long - 2 dismantling mandrels- made of S45C and SCM440 material
- for loosening and tightening the fuel sensor- includes 3 fuel sensor removal tools for the following models - Mercedes 129, 140 and 230 - Mercedes 163, 203, 209, 211, 219 - Mercedes 202 and 208
- for closing brake, fuel and other automotive steel pipes- fits on e.g. 3/8", 5/16" and 1/2" banjo fittings- distance of sealing rubber is adjustable- prevents fluid leaks and contamination during service- suitable for all automotive fluids
- allows economic renewing of tire valve stems without dismantling the tire from rim- includes: - extractor for pulling out the defective valve stems - mounting tool, consisting of a mounting shaft and cone
201 /201
- for compressing spring steel hose clamps- particularly useful in confined spaces- knurled wheel for pre-tensioning- 3/8" drive for ratchets, extension bars, etc.- jaw capacity: 0 to 40 mm- carbon steel, chrome finish
- universal handtool for even in narrow spaces (due to the bowden cable) installation and removal of CLIC-R hose clamps- 630 mm bowden cable length
- designed for checking and adjusting the engine timing- fits on Volvo S80, XC90, XC60, XC70 3.0T, 3.2 with T6 engine as of 2007- includes camshaft and crankshaft locking tool
201 /201
- for checking and adjusting the engine timing- suitable for following BMW models: 1 Series E81 / E82 / E87 / E88, 2006-2012 3 Series E90 / E91 / E92 / E93, 2006-2012 5 Series E60 / E61, 2007-2010- fits on engines: N43 (B16A/AA), N43 (B20A), N43 (B20AA) N43 (B20AY), N43 (B20KO), N43 (B20UO)- includes important tools: - chain tensioner tool - camshaft locking tool - adjusting tool for vanos - balance shaft locking tool - crankshaft locking pin - chain tensioner locking pin- to be used as OEM tools: 113340, 118690, 118691, 118692, 118693, 119340, 119341, 119342, 118710, 118711, 118712, 118700, 115120
- contains important tools for checking and adjusting the engine timing after replacing the tooth belt and engine repair- suitable for: - Citroen C5 1.8/2.0 HPi (02 - 05) Xsara 2.0 16V (02 - 05) Xsara Picasso 1.8/2.0 16V (02 - 05) - Peugeot 406 1.8 16V (00 - 04) 807 2.0 16V (02 - 05) - engine code: 6FZ (EW7J4) FRN (EW10J4 / L4 / 5) RLZ (EW10D)
- is required when replacing the timing chain- fits on Mercedes models: CLK 200K (W209), C 180K, C200K, C 230K (W203), C Sportcoupe C 160K, C 180K, C 200K, C 230K, E 200K (W211), SLK 200K (R171), C 180K (W204), CLC 180K, CLC 200K, C 180 CGI, C 200CGI, C 250CGI (W204), E 200CGI, E 250CGI (W212, C207)- suitable for engines with engine codes: M271: E18ML (02-), DE18ML (03-05), E16ML (08-), DE18LA (09-)
201 /201
- suitable for VW T5 as of 2004, Touareg and Phaeton as of 2003 with 5 and 10 cylinder engines- clamping device for removal and replacement of the camshaft wheels on 5 and 10 cylinder engines, to be used as OEM T10199 / OEM T10199/1
- crankshaft locking tool with aligning pin- to be used as OEM T10195- suitable for e.g. VW Tourag, Phaeton, etc.
- for checking and adjusting the engine timing- suitable for the following models: - Fiat Punto 1.3 JTD Multi-Jet 188A9.000 2003-2007 - Panda 1.3 JTD Multi-Jet 169A1.000 & 188A8.000 2003-2009 - Idea 1.3 JTD Multi-Jet 199A3.000 & 188A9.000 2004-2006 - Doblo 1.3 JTD Multi-Jet 188A9.000 2004-2006 - Doblo Cargo 1.3 JTD 188A9.000 2004-2006 - Opel (Vauxhall): Agila 1.3 CDTi Z13DT 2003-2008 - Corsa C 1.3 CDTi Z13DT 2003-2007 - Combo C 1.3 CDTi Z13DT 2003-2009 - Corsa D 1.3 CDTi Z13DTH & Z13DTJ 2006-2009 - Astra H 1.3 CDTi Z13DTH 2004-2009 - Tigra B 1.3 CDTi Z13DT 2004-2009 - Meriva 1.3 CDTi Z13DT & Z13DTJ 2004-2009 - Suzuki: Ignis 1.3 CDTi Z13DT 2003-2009 - Wagon 1.3 CDTi Z13DT 2003-2009 - Swift 1.3 CDTi Z13DT 2003-2010 - Ford KA 1.3 TDCi- includes the following tools: - counterholding tool for crankshaft pulley, to be used as Fiat Ford OEM 1871000200 OEM 303-1469 Opel / Vauxhall OEM KM-662-C - crankshaft adjustment tool, to be used as Opel (Vauxhall) OEM EN 46785 Opel (Vauxhall) OEM KM 955, Suzuki 09912-38300 - camshaft adjustment tool, to be used as Fiat OEM 1 871 000 900/1 860 985 000 Ford OEM 303-1472, Opel (Vauxhall) OEM EN 46781 Suzuki OEM 09917-68610 - chain tensioning lever, to be used as Fiat OEM 1870900400 - crankshaft locking tool, to be used as Fiat OEM 1870900300
201 /201
- allows troublefree mounting of timing chains on MB 111 4-cyl. petrol engines- suitable for following MB models: C-Class 180/200/220/230 E-Class 220/230 CLK 200/230 SLK 200/230 ML 230- to be used as OEM 111 589 19 61 00
- for aligning the new and old version of balance shafts- prevents noncircular engine running by misaligned balance shafts- is required when renewing timing chain, crankshaft sealing ring, replacing the cylinder head gasket, etc.- includes: - locking tools for old and new version of balance shaft - crankshaft locking tool - locking pin for chain tensioner- suitable for the following engines: - BMW: 1.6 (N40 / N45 / N45T, B16, B16A, B16AC) 1.8 / 2.0 (N42 / N46 / N46T) 2.0 / 3.0 (N51 / N52 / N52K / N53 / N54) - PSA: 1.4 / 1.6 16V (EP3 / EP6 / EP6DT / EP6DTS) - Mini: 1.4 / 1.6 (N12 / N14)- to be used as OEM 115140, 119280, 119330
- suitable for Ford Zetec SE & Duratec 1.25, 1.4, 1.6l engines, as in Fiesta, Fusion and Focus- to be used as Ford OEM 303-748, 21-259 Mazda OEM 49J E02 061, Volvo OEM 999 7201
- is needed when working on timing chain, cylinder head, etc.- includes flywheel, pump, camshaft and chain tensioner locking pin to be used as OEM 21-234, 21-251- suitable for Ford Mondeo and Transit 2.0 l / 2.4 l Duratorq 16V (Tddi and TDCi) engine code: ABFA, D2FA, D3FA, D5BA, D6BA, D0FA, FIFA, F3FA, F4FA, FMBA / B, FXFA, H9FA, H9FB, HJBA / B, HJBC, HJBE, JXFA, N7BA / B, PHFA, SDBA
201 /201
- is required when changing the timing belt, repairing cylinder head, etc.- suitable for Ford 1.4 and 1.6 L engines G8DA, G8DB, HNDA 2004-2006 and comparable engines in Mazda, Citroen and Peugeot- contains timing pins for camshaft and crankshaft to be used as: Ford OEM 21-260, 21-262, 21-263, 303-732, 303-734, 303-735, 999-7121, 5711-TD, 07744-00104-00, 18G 1580, 4527-TS2, 999-7169, 999-7122, Citroen / Peugeot OEM 0194C, 0194A, 0178D, 0194B, 0187B, 0189B, 0132AB
- contains tools for locking the camshaft and crankshaft- suitable for 1.6 and 1.8 L engines with timing belt, installed in Opel / Vauxhall, Chevrolet, Fiat, Alfa Romeo (2003-2012), e.g. Astra G / H, Corsa D, Insignia, Meriva, Signum, Vectra C, Zafira B (2003-2011)- also suitable for Chevrolet Cruze, Orlando 1.4 - 1.6 - 1.8 and Fiat Croma, Alfa Romeo 159 with engines 939A4.000- to be used as OEM tools: KM-6628-A, 2000012000 KM-6340, 2000012100 KM-6333 KM-6625, 2000012800 KM-6349, KM 6130 KM-911
- for adjusting the engine timing when replacing the timing chain, head gasket, etc.- suitable for the following BMW models: 1 series: 118 D (E81 - E87) 120 D (E81 - E82 - E87) 123 D (E81 - E82 - E87) 3 series: 318 D (E90 - E91) 320 D (E90 - E91 - E92) 5 series: 520 D (E60 - E61) X3: 2.0 D (E83)- includes the following tools: camshaft locking tool crankshaft locking tool crankshaft rotation tool- tools should be used as: OEM 116480, 115320 OEM, OEM 118760
201 /201
- contains important tools for checking and adjusting the engine timing- fits on Fiat models: 500 1.2 (07), Brava 1.2, Bravo 1.2 16V, (95-02) Grande Punto 1.2, Idea 1.2, Idea 1.2 / 16V Marea 1.2 , Marea Weekend / Marengo 1.2 Palio Weekend 1.2 / 16V (93-99) Punto 1.2, (93-99), Punto Classic 1.2 / 16V (99) Stilo 1.2 and Lancia Ypsilon 1.2 / 16V (96-03) with engine code: 176B9.000, 169A4.000, 182B2.000, 188A5.000- piston height adaptors (2x) to be used as OEM 1860992000- camshaft adjusting tools (2x) to be used as OEM 1860985000- tension adjustment wrench to be used as OEM 1860987000
- for adjusting the engine timing- suitable for engine codes LFW, RFU, RGX, RFW- includes: crankshaft locking tool 6 mm camshaft locking tool 10 mm camshaft locking pins 2 pc. tool for timing belt tensioner- to be used as OEM tools: 0132QZ, 0132Z, 4507-TA, 0132Q, 014-TM 0188Q1, TJ-4507, 0132X, 9767.89, 0132X
- for setting the engine timing on Fiat engines: 176B3.000, 176A3.000, 176A5.000, 149B1.000, 160A6.000, 160A7.000, 160D1.000, 230A2.000, 230A3.000, 230A4.000, 280 A1.000- suitable for Fiat models: Punto 1.7D / TD, 1.9D Tipo, Ducato 1.9D / TD Tempra 1.9TD with adjustable camshaft sprocket
201 /201
- for holding the crankshaft pulley while loosening or tightening the middle pulley bolt- allows safe and damage-free removal / installation- to be used as OEM 116480
- for setting the vanos units on BMW M52TU / M54 / M56 engines- includes: - mounting plate - camshaft locking tool to be used as OEM 113240 - pressure connection to be used as OEM 113450
- for holding the crankshaft pulley while loosening or tightening the middle pulley bolt- allows safe and damage-free removal / installation
201 /201
- contains important tools for checking and adjusting of engine timing- suitable for the following BMW models: E60, E61, E63, E64, E65, E66, E53 540i, 545i, 550i, 645i, 650i, 735i, 740i, 745i, 750i, 760i, X5 with engines: N62 - B40A / B44A / B48B 2003-2010 N62 - B44A / B48B 2003-2010 N62 - B36A / B40A / B44A / B48B N73 - B60A 2002-2008 N62 - B44A / B48A 2003-2007- includes the following tools: - flywheel locking tool - inlet camshaft locking tool - exhaust camshaft locking tool to be used as OEM tools: 119190, 119461, 119462, 119463
- for adjusting the engine timing after e.g. changing the timing chain or cylinder head gasket- suitable for BMW engines M42 and M50- includes: - camshaft locking tool - flywheel locking tool- to be used as OEM tools 113240 and 112300
- for adjusting the engine timing after e.g. changing the timing chain and cylinder head gasket- suitable for BMW engines M60 and M62- includes: - camshaft locking tool - flywheel locking tool- to be used as OEM tools 112441, 112442, 112445, 112446, 112300
201 /201
- suitable for VW Touareg 2003>, Phaeton 2003> with 10-cyl. diesel engine- crankshaft locking tool, for locking crankshaft when adjusting engine timing to be used as OEM T10195- adjusting bolts, for mounting of the engine control module (wheels cassette) to be used as OEM T10200- supplementary set for BGS 8443
- for holding the crankshaft pulley while loosening or tightening the middle pulley bolt- allows safe and damage-free removal / installation- to be used with a 1/2" ratchet, sliding bar, etc.
- contains important tools for controlling and adjusting the engine timing- fits on Opel / Vauxhall models: Astra G and H, 1.6 L / Turbo, year 03-08 with engine codes: Z16 LER - Z16 LET - Z16 XE1 - Z16 XEP- camshaft locking tool, to be used as OEM 21-163 / 303-620- tensioner locking pin, to be used as OEM 21-210 / 303-507
- for locking the flywheel- to be inserted into the bore of transmission housing- fits on VW, Skoda, Seat with 1.9l diesel engines
201 /201
- enables non-destructive disassembly and assembly and prevents uncontrolled movement of the piston rings
- for renewing and riveting timing chains- old timing chain is fed in with help of the new chain- a dismantling of the timing chain case is often not required- suitable for most Mercedes models- to be used as Mercedes OEM tools: 112589096300, 602589003900, 602589023300 602589024000, 602589056300, 602589056301
- suitable for cylinder heads with hardened valve seats- includes: - 6 double-sided cutters Ø 28-35 mm, 45° and 75° Ø 37-44 mm, 30° and 75° Ø 37-46 mm, 45° and 68° Ø 44-52 mm, 30° and 75° Ø 46-60 mm, 30° and 45° Ø 52-65 mm, 60° and 75° - 4 continuously adjustable guides for Ø 6.5 to 12.5 mm - T-Handle for milling cutters
201 /201
- allows removing of defective and broken M9 x 1.0 glow plugs- suitable for e.g. Fiat engines- consisting of: - special step drill with depth stop - tap M9 x 1.0 - tap 1/4" x 20 UNC - removal sockets 2.6-4.5-8.25 mm - tool holder for tappers - pull-out unit with hardened spindle
- for quick and professional drilling out damaged or torn-off glow plugs without removing the cylinder head- allows recutting or repairing of the glow plug thread and cleaning of the electrode bore- exact depth and drilling angle are reached using guide sleeves- suitable for: - M10 x 1 glow plug thread on e.g. WV Passat, Audi V6 TDI with 2.5l / 2.7l / 3.0l engines - with engine codes: AFB, AKE, AKN, ASB, AYM, BAU, BCZ, BDG, BDH, BFC, BKN, BKS, BMK, BNG, BSG, BUN, BUG- includes the following tools: - cover plate for intake ports - compressed air adapter for injector bore - 9.1 mm drill for M10 x 1 - 11.1 mm drill for M12 x 1 - tap with guide sleeve for M10 x 1 threads - tap with guide sleeve for M12 x 1 threads - 10 threaded inserts for M10 x 1 with external thread M12 x 1 - M6 x 1.25 taps - extraction tool - 2 reamers 4.8 mm, long and short type - reamer 5.8 mm long type - 3 guide sleeves Ø 17,5 mm OD - 38 mm length inside Ø 9 mm and 13 mm - 63 mm length 13 mm inside Ø - 2.4 - 5.5 mm tapping holder 240 mm long with 1/4" drive - 3 extractor electrodes for 2.5 - 3.5 - 4 mm
201 /201
- for extracting the glow plug when glow plug head is broken- suitable for glow plugs M8 x 1.0 - M10 x 1.0 - M10 x 1.25- contains tap sizes M8 x 1.0 - M10 x 1.0 - M10 x 1.25 M3 x 0.5 tap 100 mm M4 x 0.7 tap 100 mm special drills 2.5 x 120 mm - 3.3 x 140 mm 180 mm pulling bolt- material: Chrome-Molybdenum
- ensures the correct removal of burned-in, corroded or broken-off glow plugs- allows repairing of the glow plug retaining thread without removing the cylinder head- defective original thread M10 x 1 is repaired by insertion of a new threaded sleeve- includes: - puller and sliding hammer for removing of stuck and broken glow plugs - reamers for reaming of the defective thread - tap M10 x 1 and M12 x 1 - centering sleeve for reamers and taps - special step drills and taps for removal of broken glow plugs - 12 thread repair sleeves M12 x 1 to M10 x 1 - compressed air adapter
- suitable for repair of spark plug threads- easy to use- contains special HSS taps with 6-pt.-drive and 4 threaded bushes, lengths 9.5 - 11.5 - 12.7 and 19 mm
201 /201
- Principle of operation: Rotate the impact wrench in loosening direction until it stops turning. Exert one or several blows with a hammer on the wrench head. The sudden angular momentum passes to the socket and screw
- for loosening tightly fitted screw- suitable for right and left hand threads- base unit made of CR-V, satin chrome finish
- for tensioning of the tensioning wheel- facilitates the placement of the V-ribbed belt- suitable for Mercedes-Benz Types: 168, 169 (A-Class), 245 (B-Class)- length: 620 mm- size: 15 mm
- suitable for Mini Cooper S and One- for tensioning of air conditioning and alternator ribbed-belts- contains 2 release levers and 2 locking pins- to be used as OEM 118390 / 118410
- for counterholding the camshaft sprocket while loosening and tigtening the camshaft bolt- enables a rotation of the camshaft- adjustable and lockable opening width from 100 - 150 mm
201 /201
- 1/2" Drive Multi-Spline Socket 1.5 x 58 mm- allows changing of the diesel pre-chamber- fits on MB engines from 1989.- suitable for engines with the following codes: 601, 602, 602.91, 603, 604, 605, 606, 661, 662- material: chrome-vanadium steel- black phosphate finish
- for easy removing of deep valve stem seals on multi valve engines- to be used e.g. on Opel, VW and Ford- hardened jaws
- puller for BMW injection pump sprocket- is required for the disassembly of diesel injection pumps- includes puller tools for the following applications: - for removing the sprocket from the pump shaft, suitable for 4-cyl. and 6 cyl. BMW engines M41, M51 and identical engines in Vauxhall Omega 2.5 TD (M51) - for removing the sprocket from the pump shaft and holding the pump wheel in the assembly position, suitable for BMW engines M47, M47TU, M57, M57TU - guide rail pin puller for Mercedes-Benz for removing even the most stubborn pins - thrust bearing for easy turning- to be used as OEM: 135120 - 135190 - 135191 - 135192
201 /201
- suitable for Bosch injectors, installed in vehicles of following manufacturers: Opel, Ford, PSA, Fiat, Lancia, Alfa Romeo, KIA Hyundai, Toyota, Mazda, Suzuki, Iveco, Volvo with 1.3 - 1.6 - 1.9 - 2.0 - 2.2 Diesel engines- includes 3-pc. pulling bridge with extensive adaptations, can be adapted to many cylinder heads- allows high extraction forces
- for cleaning of the injectors seats and glow plugs manholes- includes: 4 cleaning brushes, brush holder, 3 Injector seat cutters, cutter guide, seal puller, brush holder extension
- for extracting tightly stuck injectors- suitable for Chrysler 2.5 & 2.7 l CRD 16 valve VM engines
201 /201
- for pulling out injectors- disassembly of the cylinder head is not necessary- support on the cylinder head allows high extraction forces- suitable for BMW engines M47TU - M57 - M57TU- the set includes the following tools: - 2 support feet 115 mm - 2 support feet 140 mm - supporting bridge with ball bearing - spindle M16, one side M17 thread, for mounting in the injector - 29 mm socket for disassembling the electric unit - internal 6-pt wrench for removing the injector needle
- for disassembly of radial sealing rings- especially suitable for sealing rings where a stub shaft protrudes and a disassembly is almost impossible without this tool- holds the sealing ring on the inside with a conical profile- suitable for most commercial sealing rings- includes the following tools: - extractor for 35 - 44 mm sealing ring diameter, with 31.5 mm center bore - extractor for 59-64 mm sealing ring diameter, center bore 54.5 mm
- a must have tool for filling and checking the fork oil capacity. The correct amount of oil is crucial for good responding properties of a motorcycle fork- allows testing of oil volume (ml) and oil level (mm)- includes: - measuring rod with adjusting ring, 0 - 300 mm - filling and measuring syringe with suction hose, 70 cc
201 /201
- helps save time, one-man operation- for pre-tensioning of fork springs- suitable for most common Upside-Down forks- 340 to 800 mm clamping range- made for springs up to 2350N- length: 570 mm
- for removal of the front and rear wheels- includes the following sizes: - 2-in-1 combined socket - 55 mm, 12-pt for rear wheel nuts - 28 mm, 6-pt for front wheel nuts - 28 mm, 12-pt for front wheel nuts - 30 mm, 6-pt for front wheel nuts - 41 mm, 6-pt for for rear wheel nuts - 46 mm, 12-pt for for rear wheel nuts- material: aluminum alloy steel, anodized
- suitable for most Öhlins models- disassembly and assembly of the upper fork tube caps- rubber pad prevents damage to the nut- material: aluminum alloy steel, anodized- 1/2" and 6-pt drive
- for removal of the left-hand engine cover- fits on Ducati models from 1990 - 2009: 600 / 620 / 695 / 696 / 748 / 749 / 750 / 800 / 848 / 851 / 888 / 900 / 906 / 907 / 916 / 996 / 998 / 999 / 1000 / 1078 / 1098 / 1100 / 1198- material: body made of aluminum alloy steel, anodized, studs and spindle made of carbon steel
201 /201
- suitable for all current 6-speed Ducati models with dry clutch- allows a damage free disassembly / assembly of clutch components- includes retaining bolt for locking the tool- material: fiberglass polyamide
- for locking the camshaft when replacing the timing belt, checking the engine timing, etc.- suitable for Ducati models 851, 888, 916 and 996- material: aluminum alloy steel, anodized
- for locking the camshaft when replacing the timing belt, checking the engine timing, etc.- suitable for Ducati models 748, 916, 996 and Desmoquattro- not suitable for ST4 or S4 engines- material: aluminum alloy steel, anodized
- for locking camshaft when replacing the timing belt, checking the engine timing, etc.- suitable for Ducati models 749, 999, 748, 916, 996 Desmoquattro with Testastretta engines- material: aluminum alloy steel, anodized
201 /201
- allows mounting and aligning of the front wheel axle when tightening the axle nut- suitable for Ducati 848, 1098, 1198 and other models with 30 mm axle inner diameter- material: aluminum alloy steel, anodized
- allows mounting and aligning of the front wheel axle when tightening the axle nut- suitable for Ducati 999, ST2, ST3, ST4, 620SS, 800SS, 1000SS and other models with 25 mm axle inner diameter- material: aluminum alloy steel, anodized
- for loosening / tightening axle nuts- suitable for following Ducati models: 1098, 1198 Streetfighter or Multistrada 1200, 748, 848, 916, 996, 998, Hypermotard, Multistrada, Monster, Supersport, Sport Classic- 55 mm 12-pt. for rear wheel axle - 28 mm 6-pt. for front wheel axle- material: aluminum alloy steel, anodized
- for removal of rotor wheels- suitable for 5 different internal thread sizes: M14 x 1.5 - M16 x 1.5 - M18 x 1.5 - M24 x 1 - M27 x 1- M24 x 1 - M27 x 1 with 21 mm cut-out for counterholding- dimensions: 165 x 165 mm
201 /201
- to separate O-Ring, X-Ring and conventional chains- suitable for following chains: 428, 428H, 520, 520H, 525, 525H, 530, 530H, 630, 630H
- left sided thread M27 x 1.0- M16 spindle with sliding bar- inner diameter: 18 mm- length: 97 mm- material: S45C steel- suitable for e.g. following motorcycles: - Aprilia Area, Gulliver, Scarabeo, Sonic, SR 50, etc. - Benelli 491 - 50, K2 - 50, Naked 50, Pepe 50, etc. - Beta Ark 50, Eikon 50, Quadra 50 , Tempo 50 etc. - CPI Aragon 50, Crab 50, Formula 25, GTR 50, etc. - Italjet Dragster 50 - KTM Ark 50, Kross 50 - MBK CS 50, CW 50, EW 50, YH 50, YN 100, etc. - Yamaha CA 50, CS 50, CW 50, EW 50, YE 50, etc.
- for blocking and removing the variator and clutch bell- integrated hex wrench for loosening the coupling nut (34 mm)- pin pitch: 55 mm- made of stainless steel- to be used as OEM 14569-PI- suitable for many models of following manufacturers: Aprilia, Derbi, Gilera, Italjet, Peugeot, Piaggio, Vespa
- for separating and riveting chains- suitable for chains 35 up 630- also suitable for engine timing chain- 3 separating tips included: 2.2-2.9-3.8 mm
201 /201
- for loosening of tight oil filters- especially suitable for tight spaces- steel strip is tensed by turning the clamping screw at the end of the handle- profiled steel strip prevents sliding over the filters
- includes the following oil filter cap wrenches: - 64.5 mm x 14-pt., aluminum chrome finish, for Toyota Auris, Corolla, Premio, Prius - 64.5 mm x 14-pt., aluminum chrome finish, for Toyota V6 Modelle von 2007-2008 Lexus ES 350, GS 350, GS 350h, LS 460, RX 350, LS 600j L - 88.8 mm x 15-pt, aluminum chrome finish, for Kia and Hyundai - 74.2 mm x 14-pt., aluminum chrome finish, for Audi, BMW, Ford, Mazda, Toyota, Volkswagen, Porsche, Mercedes V6 / V8 - 86.6 mm x 16-pt., aluminum chrome finish, for BMW 335i, 535i, 3 series E90, X6 3.0L, Volvo Modelle 1999-2006 (not 2005 40 and 50 models) - universal oil filter cap wrench 63 - 83 mm, SCM 440 chrome finish - 27 mm x 6-pt., S45C nickel, for Mercedes and Smart models - 32 mm x 6-pt., S45C nickel, for Opel 4-cyl. 2.2 L X10XE, X12XE, Y17DT, Y17DT and Mercedes OM 364, OM 366 - 36 mm x 6-pt, S45C nickel, for Mercedes Diesel OM604, OM605, OM606, BMW M52, M60, M70, Mini, VW VR6
- suitable for the following models: - 2007-2008 Toyota 3.5l V6 - Lexus GS300 (2006) - Lexus IS250 (2006 -) - Lexus ES350 (2007 -) - Lexus GS350 (2007 -) - Lexus GS450h (2007 -) - Lexus LS460 (2007 -) - Lexus RX350 (2007 -) - Lexus LS600H (2008)- drive: 3/8" and hex. 24 mm- material: aluminum, black coated
201 /201
- for removing oil filter housing- special design for tight spaces- includes the following sizes: - 24 mm, suitable for BMW N62, models 5/7 - 27 mm, suitable for: BMW Mini - Renault 1.5 / 1.9 / 2.2 / 2.5 DCI Ford Fiesta 1.4 / 1.6 TDCi Mercedes A-Class Ford Transit 2.2 / 2.4 / 3.2> 2006 - 32 mm, suitable for: Ford Transit 2.0 / 2.4 2000-2006 Volkswagen Polo 1.2, Transporter T5 1.9> 2004 Audi A6 3.2 V6 TSI> 2004 - Vauxhall / Opel Astra G, Corsa B - 36 mm suitable for: M616 Mercedes vans, vans 116MB/100 Mercedes 220D, E220D, M604, C250D, E250D, M605, E300D, M606 BMW M52 (3/5 series), M60 (5/7/8 series), M73 (7/8 series) Vauxhall / Opel Vectra B di 16V> 98 Volkswagen Transporter T5, Lupo 1.2 TDi, Toureg TDi - 38 mm, suitable for Vauxhall / Opel Astra, Zafira 2.0 / 2.2 dti- to be used with ratchet- on metal rail
- suitable for e.g. following models: - Mercedes-Benz Sprinter (2007) - Mercedes-Benz E320 (2007) - Dodge Sprinter (2007) - Jeep Cherokee 3.0 V6 Diesel (2007)- depth: 48 mm- drive: 1/2"
- 19 mm hexagon x M16 spline (tamperproof)- length: 240 mm- chrome-molybdenum steel- satin chrome finish
- 17 mm 6-pt ring spanner with 14 mm internal hex. bit, slightly angled- satin chrome finish
201 /201
- for removing 55 to 95 mm oil filters- three leg oil filter wrench with 4- / 6-pt. drive- replaceable legs in different lengths- handwheel for loosening and tightening- 150 Nm capacity for stuck filters
- prevents damage to the fuel filter housing- clamping device for clamping the filter housing in a bench vise- special wrench allows easy disassembly of the housing cover- suitable for: - Opel engines: DA13, Z13DT, Z13DTH, Z13DTJ Z19DT, Z19DTL, Z19DTH (not for Corsa and Meriva-D as of 2007) - Fiat-/Lancia-Motoren: 1.3 MJTD 16V - 1.3 16V JDT - 1.9 JTD 8V 2.0 8V JDT - 2.2 16V JTD - 2.3 16V JDT 2.8 JTD - JDT 3.0 16V (only for vehicles with fuel filter insert)
- especially suitable where a low tank height is required- suitable for all fluids in the car such as cooling fluid, all kinds of oils, etc.- filtering sieve- drain and vent opening- max. capacity: 20 l- movable, with 2 wheels
201 /201
- helps to fill in engine oil spillage free- tubing and adapter are made of aluminum- 1l funnel capacity- includes the following adapters: - M37 x 3.0 for Lexus, Toyota (except Prius & Yaris) - M42 x 4.5 for Subaru (except Tribeca) - M32 x 3.5 for Nissan, Honda, Accura (except MDX & RDX) - M35 x 4.0 for most Mazda - bajonet adaptor for Audi, VW, BMW, Mercedes, Volvo, Dodge
- for clean filling of engine oil- fixed mounting on oil filler- funnel diameter: 125 mm- length: 220 mm- 65 mm viewing window
- suitable for following cars: VW, Audi, Seat, Skoda, Mercedes-Benz, BMW Toyota, Mitsubishi
- double angled for hard to reach places- height: 320 mm- funnel: Ø 145 mm
201 /201
- with pump and 7 adaptors- fits on following truck models:- DAF-XF 95, XF 105- Scania-113, -114, -124 und -125- Volvo-FH 12- Iveco-Daily 2000 C-Series, Renault-Magnum- MAN-L 2000, -TGA- MB-Actors, -Atego, Axor, -ECO 8401, 1728, MAN- F 90, -F 2000, Iveco-EURO-Star, -EURO-Tech, Euro-Truck, Strahlis- MB-Sprinter
- for pressure tests of cooling systems- 4 expanding cone adapters- suitable for most vehicles- dimensions of the cone adapters (in mm):- min. max. heigth 17,0 37,0 64,0 28,5 41,0 74,5 37,0 50,0 74,5 47,0 60,0 74,5- pump with color-coded gauge 0-2.4 bar (0-35 psi), quick coupler and pressure release valve
- suitable for checking pressure and vacuum systems like boost pressure, vacuum solenoid valves, tank vents, MAP sensors, etc.- also suitable for brake bleeding- 63.5 mm pressure / vacuum gauge- pressure indicator range: +0 to +3 bar- vacuum indicator range: -0 to -1 bar
201 /201
- quick, clean and easy way to fill cooling system during the bleeding process- versatile, suitable for many reservoir types- with shut-off valve- adapter Ø 31 - 35 - 40 and 45 mm
- for filling the fuel system- is required when renewing diesel filters and other components of the diesel fuel injection system- prevents defects of high pressure pumps (CDI) which frequently occur renewing filters without manual filling
- allows detection of leaks in air condition systems, engines, gearboxes, etc. (in conjunction with fluorescent additives)- includes UV flashlight, 2 rechargeable batteries, charger, protective glasses with special UV filter- LED type: 3 Watt UV high power- housing: aluminum anodized- batteries: 2x 18650 (2200 mAh)- AC battery charger: 1x Battery 18650
- for determining the required wrench
201 /201
- for quick and easy determination of e.g. brake disc thickness, also suitable for all other measurements- spring loaded
- allows reading and deleting OBDII trouble codes- no trouble code list required, all trouble codes are displayed in plain text- viewing the freeze frame values is an important feature to locate a fault- reading of readiness codes indicates if emission systems are ready or not- enables reading live data, various parameters are shown in real time- power supply via OBDII cable from the vehicle- easy to use- menu languages: German, English
- switchable from inches to mm- measuring range: 0 - 12.7 mm (1/2 ")- reset button for zero position- automatic shut-off- suitable for example standard dial gauge and as a replacement gauge for Art 1938- clamping Ø 8 mm, hardened- hardened ball tip
- for checking the electrical socket, e.g. after mounting a trailer hitch- suitable for 12V systems- possible functional test: right and left indicator light brake light left and right tail light rear fog light polarity test- LED type- 100 cm connecting cable
201 /201
- for extending the measurement capabilities of calipers- allows measurements on: - deeper measurement points - inwardly tapered components- includes: - measuring leg, 2 pcs - measuring tip, long, 2 pcs - measuring tip, short, 2 pcs. - measuring heads, short, 2 pcs- perfect for use on brake discs
- in wooden case
- for checking the charging system components when installed- professional and economic troubleshooting- safety valve prevents applying excessive pressure- suitable for turbochargers, G-chargers, compressors- fits on most charging system hoses- system is closed by plugs and pressurized- also suitable for leak detection
- suitable for testing of freeplay angle and the clearance on dual mass flywheel (DMF)- a checking of the flywheel is recommend because a worn or defective DMF can damage the new clutch- test can be performed directly on the vehicles if the clutch has been removed- includes: - 2 different claws for locking the flywheel - angular disc with holder - dial indicator with holder - assembly / measuring bolt - twist lever
201 /201
- wide range of applications, suitable for e.g. air conditioning, food processing, heating and ventilating, agriculture, automobile, photography, food storage, refrigeration, laboratory, etc.- memory of the last measured value- low battery display- sensor fault display- auto power off after 15 min.- switch between °C and °F- temperature range: -50°C to +300°C (-58°F ~ +572°F)- temperature steps: 0.1 °C- accuracy: (-20°C - 80°C) +1°C- power: 1.5V battery- length of probe: 125 mm
- flexible shaft- strong magnet- plastic handle, black- length: 500 mm
- bright LED for good illumination- strong magnet, lifts up to 500g- length: 615 mm
- sockets are held by magnetic strip- with strong holding magnet
- 3011-1 for holding 10x 1/4" sockets- 3011-2 for holding 12x 3/8" sockets- 3011-3 for holding 10x 1/2" sockets
201 /201
- allows a gentle clamping of sensitive workpieces such as aluminum, copper, etc.- embedded magnetic stripe for holding the protection- horizontally and vertically V-shaped profile- sold without bench vice
- dimensions: 480 x 320 x 36 mm- acid-resistant EVA foam
- for a professional, clean work- protects fender from dirt and scratches- upper edge with magnetic stripe
- facilitates wheel mounting on rim- dimensions: 290 x 150 x 50 mm- material: 30% fiberglass
201 /201
- can fit coffee mugs, pop cans, water bottles and more- powerful magnet on backside- diameter: 88 mm- height: 188 mm
- heavy duty workshop finish- heavy duty ball bearing castors, thereof 2 castors lockable- lockable through central lock- smooth-running, ball bearing drawers- 11 drawers, fully extendable in following sizes: 93 x 41 x 10 cm 57 x 41 x 7 cm I 34 x 41 x 7 cm 57 x 41 x 7 cm I 34 x 41 x 7 cm 57 x 41 x 7 cm I 34 x 41 x 7 cm 57 x 41 x 10 cm I 34 x 41 x 7 cm 57 x 41 x 21 cm I 34 x 41 x 21 cm- practical work plate, made of wood- size: 107 x 108 x 48 cm- weight: 116 kg
- for removal and installation of bearings, bushings, etc.- suitable for fixed mounting on e.g. workbenches- dimensions: (H) 1075 x (W) 620 x (D) 450 mm- 3-way adjustable support beam- can be used on workpieces up to following dimensions: - width: 345 mm - height: 170 to 330 mm- stroke of hydraulic cylinder: 90 mm
201 /201
- especially for off-road vehicles with a high ground clearance- allows easy lifting, even when lifting on soft underground- has a setback locking mechanism for actuating tube- lifting capacity (max): 400 kg- lifting height: min. 130 mm to max. 930 mm- weight: 14.5 kg
- 4 metal castors, 2 swivel castors- max. load: 3,000 kg- lifting height: 140 - 520 mm- weight: 36,5 Kg- dimensions: L660 x W344 x H180 mm (height without lifting tube)
- easier to maneuver in the smallest space- ideal for exhibitions, workshops and towing companies- load capacity 600 kg per positioning jack- tire width up to max. 330 mm- ground clearance: 160 mm- max. lifting roll distance: 610 mm (extended)- min. lifting roll distance: 355 mm (retracted)- dimensions: 650 x 620 mm
201 /201
- secure support of engine or gearbox during assembly- is required for e.g. disassembly of the engine mount, timing belt and replacement of clutch- sturdy square tube construction- feets and support plate are height adjustable and lockable- rotatable retaining hooks, adjustable in height by hand wheel- slidable and fixable crosspiece and retaining hook- support plate with non-slip rubber pad- especially suitable for large fender angle, where a mounting of engine bridge is very difficult- suitable for many common vehicles- length of the longitudinal beam: 690 up to 1050 mm- max. retaining hook distance: 500 mm
- for extracting gasoline and diesel fuel- allows an easy renewing of tanks, fuel pumps, tank sensors or emptying wrongly refilled tanks- 3 suction tubes Ø 6 - 8 - 10 mm, 2 m long- suction power: 5 l/min- working pressure: 5 to 8 bar- air consumption: 170 l/min- air connection: 1/4"
201 /201
- for cleaning of small parts- cleaner brush is rinsed for best cleaning results- W640 x D440 x H260 mm
- for folding of metal sheets up to 600 mm width and 1.2 mm thickness- support for mounting in a bench vice
201 /201
- for collecting oil during axle repairs- suitable for rim inner diameter over 13-3/4" (350 mm)- with side opening for draining the oil- temperature range: -40 ° C to +80 ° C- dimensions: 316 x 246 x 156 mm
- suitable for sheets up to 1.6 mm thickness- minimal space requirements- suitable for mounting in a bench vice
- allows bending of pipes up to 180°- 3 bending radii for pipe diameters 3/16" (4,8 mm) - 1/4" (6.4 mm) 5/16" (8,0 mm) - 3/8" (9.5 mm)- suitable for aluminum, copper and thin steel pipes- material: rolls made of aluminum, basic unit made of steel- dipped coated grip
- for transferring liquids from plastic barrels with screw connection, 56,5 - 58,5 mm- suitable for oil, coolant, etc.- 50" oil-resistant flexible hose- with non-drip nozzle and a drain back nozzle holder- self-priming down-stroke style pump- capacity: 60 cc / stroke- max. fluid temperature: 140°F (60°C)
201 /201
- tool tray made from high-resistance foam- size: 570x410x30 mm- suitable for e.g. BGS 4100 + 2001
- 4011-5 - replacement inlay for BGS 4011- 4012-5 - replacement inlay for BGS 4012- 4013-5 - replacement inlay for BGS 4013- 4014-5 - replacement inlay for BGS 4014- 4015-5 - replacement inlay for BGS 4015- 4016-5 - replacement inlay for BGS 4016- 4017-5 - replacement inlay for BGS 4017- 4020-5 - replacement inlay for BGS 4020
- suitable for tightening right- and left-hand thread screws- "Go-thru" square head for changing the direction- automatic triggering by click signal- lockable torque value- length: 650 mm
- 1/4" square drive head- auto-locking- click signal when torque setting is reached- particularly suitable for tightening the sensors of Tire Pressure Monitoring Systems (TPMS)
201 /201
- square drive: 1/2"- working torque: 515 Nm- max. torque: 678 Nm- free speed: 11,000 RPM- working pressure: 90 psi- impact mechanism: twin hammer- air consumption Ø: 5.8 CFM- air inlet: 1/4"- recommended hose size: 3/8"- weight: 1.6 kg- short, lightweight design
- lightweight aluminum housing- 2-component soft handle- steel guard protects you from sparks- lever block trigger for safety- with rear exhaust- cutting disc size: Ø 75 mm- working pressure: 90 psi- air inlet: 1/4"- max. speed: 18,000 rpm- length: 310 mm
- versatile 3-in-1 air tool: Delta Sander - Saw - Scraper- powerful operation- perfect for working in hard to reach areas and close to corners- triangular sanding pad: 3" (45°)- diamond cutting disc- air pressure: 90 psi- air inlet: 1/4" -18 NPT- maximum oscillations: 18,000 rpm- air consumption 6.0 cfm- noise LpA: 86 dB(A) - LwA: 97 dB(A)- vibration: 3,62 m/s²
201 /201
- for filtering and oiling of compressed air- can be screwed on a wall- max. pressure: 15 bar (220 psi)- air inlet and outlet: 1/4" thread- pressure gauge adjustable 0 to 10 bar (0 - 150 psi)- oil adjustable in 10 steps
- perfect for all applications around the car body and all other metal surfaces- for removing old paint, rust, dirt etc.- can be used with brown aluminum oxide and grain sizes from #46 - #100- easy-to-use, low consumption as tool re-uses the grit - 4 different nozzles included - surface nozzle - inside corner nozzle - outside corner nozzle - panel spot nozzle - aluminum cup size: 1000 c.c. - material: aluminum alloy, enameled
- handy, short design- adaptor for following cutting discs included: 3" Ø, 3/8" bore, 1/16" thickness- free speed: 20,000 rpm- average air consumption: 4.5 CFM- required air pressure: 90 PSI- air inlet: 1/4"- recommended air hose: 3/8" (inside diameter)- overall dimensions: 185 x 80 mm- weight: 0.78 kg
201 /201
- for easy and quick riveting- suitable for rivet sizes 2.4 - 3.2 - 4.0 - 4.8 mm- pulling power: 720 Kg- air consumption: 0.86 l/min- stroke: 14 mm- air inlet: 1/4"- working pressure: 6.2 bar
- for sanding sufaces- with air hose and dust bag- sanding pad: Ø 6"- free speed: 10000 rpm- sanding stroke: 5 mm- air inlet: 1/4"- air suction hose: 3/8"- air consumption: 4.5 cfm- working pressure: 6.3 bar- length: 225 mm- weight: 1 kg
- suitable for painting car and machine parts- aluminium body- chromed surface- 500 ccm cup, with filter- stainless nozzle (1.4 mm)- air inlet: Euro type quick connector- max. pressure: 87 PSI- working pressure: 30 to 43 PSI- air consumption: 14.5 cfm- noise level: 74.8 db(A)- temperature range: 5 to 40°C
201 /201
- adjustable air flow- 110 mm nozzle- material: aluminum alloy- air supply can be attached to handle or top of the gun- non-slip handle- includes 1/4" air connector- max. pressure 10 bar, operating pressure 6.3 bar- noise level: 86 dB- air consumption: up to 320 l/min
- length: 165 - 300 mm (adjustable)- working pressure: 6.2 - 8 bar (90 - 120 psi)- max. pressure: 15 bar (217 psi)- air inlet: 1/4"- noise: max. 73 dBA
- for sandblasting / cleaning of surfaces with e.g. dry glass beads or plastic granule abrasives- suitable for part size up to 66 x 53 x 49 cm- sealed cabinet with lid and viewing window, mounted gloves and cabinet air filters, to prevent the escape of abrasive material- saves blasting material, prevents workplace contamination- includes blasting gun and 4x different nozzle, replaceable protective film for viewing window- working pressure: 6.2 bar- dimensions: W585 x H(front 415) (rear 485) x D495 mm
201 /201
- suitable for mounting on wall, floor and ceiling- with hose stop, auto retracting- hose diameter: 3/8"- hose length: 50"- air inlet (F): 3/8" NPT- air outlet (M): 3/8" NPT- maximum pressure: 300PSI- maximum air flow: 25 CFM
- for mounting on boat trailer, etc.- rope Ø: 4.2 mm- lenght of rope: 8 m- capacity: 270 kg (275 daN)- gear ratio: 3.1:1
suitable for pulling loads only, not for lifting
- for separating the battery from the electrical system- is used in motor sports, construction machines- prevents battery drain- 2 mounting holes- protective cap prevents entry of moisture- incl. 2 keys with hole for operating cable
- for disconnecting the battery when not used for a prolonged period- can also by used to prevent theft of a car- suitable for batteries with round terminals
201 /201
- for disconnecting the battery when not used for a prolonged period- can also be used to prevent theft of a car- suitable for batteries with flat terminals
- 4x triangle reflector, red, 160 mm- 2x round reflector, red, Ø 80 mm- 6x round reflector, yellow, Ø 60 mm- including nuts and screws- E4 approved
201 /201
- Principle of operation: There is an alternating magnetic field. The metallic object (e.g. nut), in the induction coil, acts on the induced eddy currents as a electrical resistance and thus heats up.
- allows heating of screws / nuts without severely heating surrounding components or even destroying them, as it is often the case when heated with a torch- within the shortest possible time, e.g. rusty nuts are heated and can be loosened- using for e.g. ball joint pinch bolts and other items on axle and engine- also for heating components such as bearings- includes the following induction coils inductive coil 19 mm, 185 mm long (for Ø 15 - 19 mm) inductive coil 23 mm, 185 mm long (for Ø 19-23 mm) formless coil, 800 mm, for heating of components (bearings, etc.)
- power supply: ac 50 Hz to 250 V- current: 7 Amps- cable length: 230 cm- dimensions: 335 x 170 x 68 mm
- Ideal for electricians, schools, car electricians and for development and production- soldering iron holder and cleaning sponge- digital LCD temperature display simultaneously shows the set and actual temperature- compact design- electronic temperature control- reaches set temperature after a short time- secure, low operating voltage on soldering iron- temperature pre-selection by buttons 200°, 300°,400°- fine adjustment is done via + and - buttons- conversion button for switching the unit from °C to °F- potential equalization socket for protecting sensitive components- error appears on the display and by an audible signal- power supply: 220 to 240 volts (50Hz)- fuse: T1 A/250 V 50 x 20 mm glass tube- temperature range: 150 ° C to 450 ° C- soldering iron power: 48 Watt (24V)- temperature display: LCD display 2x 3 ½ digits- display area: 150 ° C to 450 ° C.- accuracy: 5% Air pressure: 600 hPa to 1000 hPa- working temperature range: +5 ° C to +40 ° C- relative humidity: 85%- weight: ca.1800g- dimensions: 210 x 125 x 135 mm
201 /201
- for piercing rubber seals- cable can be put through the handle into the hollow the piercing awl
- includes 3pcs per value 20A - 30A - 40A - 50A 60A - 70A - 80A - 100A- dimensions: 30 x 35 mm- contact distance: 8 mm
- for grinding of surfaces in automotive and other sectors- 50 mm adapter disc with 6 mm shaft- 4 grinding discs, grit 2x #60 and 2x #120- suitable for electric drills
- for grinding of surfaces in automotive and other areas- 75 mm adapter disc with 6 mm shaft- suitable for electric drills- grit: #60 - #80 - #120
- for grinding and polishing of surfaces in automotive and other areas- 125 mm adapter disc M14 with Velcro- includes foam pad, wool pad, sanding paper (aluminum oxide), grit #400 - #600 - #800- suitable for machines with M14 adaptor, e.g. bench grinders
201 /201
- suitable for axle boots, hoses, etc.- suitable tool for tensioning BGS 1521
- cranked type- suitable for angle grinders- hole: 22.2 mm- disc thickness: 2.5 mm- max. speed: 80 m/s
3922- suitable for steel- max. Speed: 13,300 rpm- disc diameter: 115 mm
3923- suitable for steel- max. speed: 12,200 rpm- disc diameter: 125 mm
3927- suitable for stone- max. speed: 13,300 rpm- disc diameter: 115 mm
3928- suitable for stone- max. speed: 12,200 rpm- disc diameter: 125 mm
- suitable for electric drills- for the removal of adhesive residues, ect.- shaft size: 5/8"-24, length: 12 mm- incl. adapter 5/8"-24 to 6.0 mm, length: 40 mm- diameter: 90 mm- thickness: 15 mm- max. 4000 RPM
201 /201
- for the sealing of connections- suitable for sanitary and pneumatic fittings
- material: HSS steel
- consists of the following sealing ring sizes:- 5.0 x 10 x 1.0 mm - 6.0 x 10 x 1.0 mm 7.0 x 10 x 1.0 mm - 8.0 x 10 x 1.0 mm 10.5 x 17 x 1.5 mm - 11.0 x 17 x 1.5 mm 12.5 x 20 x 1.5 mm - 14.0 x 18 x 1.0 mm 14.0 x 20 x 1.5 mm - 15.0 x 20 x 2.0 mm 16.0 x 22 x 2.0 mm - 16.5 x 24 x 2.0 mm 17.5 x 24 x 2.0 mm- in a reusable universal box
- content: - 33 pcs 4.5 mm - 33 pcs 5 mm - 33 pcs 6 mm- suitable for eyelet pliers BGS 569 and 570
- for adopting connection fittings- clamps for Ø 6 - 10 - 08 - 12 and 16 mm- satin chrome finish
201 /201
- non-slip coating- high wearing comfort- minimal impairment of the sense of touch, thus also suitable for fine motor assembly work
- is required for cable entry, tap water connectors, fittings in stainless steel sinks, etc.- chrome-molybdenum steel- suitable for aluminum, steel, stainless steel sheets, etc.- 35 mm punch diameter
- can be filled with conventional lighter gas- extremely high flame temperatures up to 1000°C- suitable for soldering, putting things on fire etc.- is used in the workshop and kitchen- flame range: from lighter flame up to soldering burner- equipped with: - piezo ignition - secure switch - flame size regulator - auxiliary air valve for higher temperature
- extra flat blade, hardened & polished- made of stainless steel- double serrated blade for the following jobs: - saw shaped side for solid and hard insulation - wave shaped side for soft and pliable insulation - blade tip for drilling into insulation materials- 2-component handles- blade length: 280 mm- overall length: 420 mm
201 /201
- 2 bit adapters with 1/2" and 3/8" drive- internal hexagon bits, 30 and 75 mm length sizes: 4 - 5 - 6 - 7 - 8 - 10 - 12 mm- T-Star bits, 30 and 75 mm length sizes: T20 - T25 - T30 - T40 - T50 - T55- spline bits, 30 and 75 mm length sizes: 5 - 6 - 8 - 10 - 12
- includes the following tools:- 1/4" 4-pt. adapter, 50 mm long- 1/4" 4-pt. adapter, 25 mm long- bit holder, 60 mm long- bit for screw hooks- 10x 6-pt. sockets, 4 to 13 mm- 10x 6-pt. sockets, 5/32 "to 1/2"- 9x slot bits 3 to 8 mm- 8x phillips bits, PH 0 to PH 3- 8x phillips bits, PZ 0 to PZ 3- 10x T-Star bits, T8 to T45- 10x T-Star bits, tamperproof, T8 to T40- 9x int.hex. bits, 1.5 to 8 mm- 10x int. hex. bits, 1/16" to 1/4"- 6x int. hex. bits, tamperproof, 2 to 6 mm- 6x int. hex. bits, tamperproof, 2/16 to 5/32 "- 4x 2-pin bits, size 4 to 10- 3x double V-profile bits, size 1 to 3- 3x special cross bits, size 6 to 10- 3x multi-tooth bits, M5 to M8- 4x 4-pt. bits, size 0 to 3- 4x 3-slot bits, size 1 to 4
- sizes: 6 - 7 - 8 - 9 - 10 -12 - 11 - 13 - 14 mm- 2-component handles
- ratchet- sliding bar- 8" extension bar- 10" extension bar- 6-pt. sockets 36 - 41 - 46 - 50 - 55 - 60 - 65 - 70 - 75 - 80 mm
- sizes: 8 -10 - 11 - 13 - 14 - 16 - 17 - 19 mm
- TÜV / GS tested version- according to DIN 5108- work surface with a grid pattern, avoids slipping- steel tube handle, chrome-plated- non-slip 2-component handle- forged head, powder coated, black- safety pin between shaft and head
- TÜV / GS tested version- according to DIN 5108- work surface with a grid pattern, avoids slipping- steel tube handle, chrome-plated- non-slip 2-component handle- forged head, powder coated, black- safety pin between shaft and head
- double-joint for wider opening of the tips small handle opening- particularly suitable for working at small spaces- includes: - nosed pliers, straight, 340 mm long - nosed pliers, slightly angled, 340 mm long - flat pliers, straight, 300 mm long- dip coated handles, black- in bag
- for removing rust, cleaning and reconditioning of surfaces- 3pc. 7 mm shank for e.g. electric drill- shaft length: 48 mm- 5 brushes: Ø 25 - 40 - 50 - 60 - 75 mm- max. speed: 4500 rpm
- allows the installation of new exhaust pipes on old exhaust parts- includes 3 expanders for diameters: 54 - 89 mm, 38 - 64 mm, 28 - 44 mm
- max. torque: 786 Nm- free speed: 7,000 RPM- working pressure: 90 psi- impact mechanism: twin hammer- air consumption Ø: 7 CFM- air inlet: 1/4"- recommended hose size: 3/8"
- square drive: 1"- max. torque: 2,200 NM- free speed: 3,900 RPM- air pressure: 90 - 115 PSI- air inlet: 1/2"- min. hose diameter: 1/2"
- for flaring thin-walled steel, aluminum and copper pipes- suitable for pipe diameters 4.75 mm (3/16 ") and 6:00 mm (1/4")- solid construction- can be used in a bench vise- includes: basic unit with spindle and handle 4.75 mm clamping jaw 6:00 mm clamping jaw 4.75 mm flare tool (concave + convex) 6:00 mm flare tool (concave + convex) cylindrical / flat flare tool
- for depressing the valve springs- allows changing of the valve stem seals without removing the cylinder head- pressure hose for filling compressed air into the cylinder- suitable for M14 and M18 spark plug threads- including valve collet mounting tool
- suitable for extracting bearings, bushings, sleeves, etc, especially for removing out blind holes- includes: - 370 mm slide hammer, 1430 g - 4 spreading claws: 10-14, 15-19, 18-25 and 25-32 mm
- allows a clean oil change- funnel for collecting waste oil- 122 to 152 mm adjustable height- funnels and containers made of plastic- drain pipe made of steel
- for dismantling of bearings installed in a blind hole- is used when reparing e.g. car transmissions- includes the following tools: - slide hammer, length 290 mm - 2-feet puller with spindle - expansion sleeves for bearing with a inner diameter of 8 - 58 mm
- for removal of diesel injectors- various adaptors make the kit suitable for most diesel injectors- includes also the following components:- 3 different slide hammers 1.6 kg, 160 mm length 2.7 kg, 460 mm length 5.1 kg, 600 mm length- 2 pulling claws with fork opening 13.7 x 18 mm, 105 mm length 12.7 x 19 mm, 130 mm length- 5 slotted 6-pt 1/2" sockets, 100 mm length sizes 25 - 27 - 28 - 29 - 30 mm- injector extractor, sleeve design, with shells outer diameter 35 mm internal diameter 29 mm M17 x 1.0 spindle- pulling adapter with external thread M27 x 1.0 (3pcs) and M25 x 1.0- pulling adapter with internal thread M27 x 1.0 (3pcs)- sliding hammer adapter for inner, outer and claw extractor
- incl. ball joint adaptor on hammer for use in confined areas- set includes deep open type sockets for dismantling injectors and adaptors- allows easy and quick removal of the injector- includes: - sliding hammer with shaft and handle - ball joint adaptors - adaptors (internal thread): M14 x M14 - M17 x M14 - M25 x M14 - M27 x M14 - adaptors (external thread): M27 x M14 - M20 x M14 - 6-pt socket for elecrical unit: 25 - 27 - 29 - 30 - 10 mm hexagon bit socket with 1/2" drive
- for checking the components of the vacuum system e.g. MAP sensors, valves, hoses, etc.- also suitable for bleeding brakes and clutch systems- includes connecting hoses, bleeding bottle, hose connector / adapter- max. vacuum: -0.7 bar / -10 psi
- for repairing threaded holes- minimizes time and expenses- the set includes the following tools: - 5 drills for drilling out the broken thread - 5 taps - 5 insertion tools for mounting the spare inserts - 5 break off tools for removing of the installing pins - 110 thread inserts, sizes: 25 pcs. each: M5x0.8 - M6x1.0 - M8x1.25 - M10x1.5 10 pieces: M12x1.75
- for mounting on trailers- left and right rear light units 10 x 10.5 cm- rear, brake, license plate light and turn signals- triangle reflector 13.5 x 13.5 cm- 6 meter 5-core cable 5 x 0.5 sqmm- width: 137 cm- incl. 7 pin connector- E-marked
- for mounting on trailers- 2 mounting holes- dimension: 13.5 x 13.5 cm- E-marked
- for mounting on trailers- 10 x 10.5 cm left and right rear light unit- rear, brake, license plate light and turn signals- lighting unit connected with 2.2 m cable- 7.5 meter 5-core cable- incl. 7 pin connector- E-marked
- screwed cable pins
- screwed cable connector
- is used to reset the brake piston when changing the brake pad- with universal adapter- to be operated with T-handle or 19 mm wrench- fits for example - Audi: 80, 90, V8S, 100, A2, A3, A4, A6, A8, and TT Quattro - Ford Sierra (ABS), Granada, Galaxy, Scorpio - Honda: Prelude - Jaguar: XJ4D - Malzda: 323, 326 - Mitsubishi: Galant GLSi - Nissan Silvia 1 B Turbo. - Rover: 800 Series - Saab: 9000 - Seat Ibiza, Toledo, Leon, Arosa, Alhambra - Skoda: Fabia, Octavia, Superb - Subaru: L & Series 2 - Toyota: Celica, Corolla GT Mr2 - Volvo: 440, 460, 480, S40, V40 - VW: Golf 3, Golf 4, Golf 5, Lupo, New Beetle, Passat, Polo, Sharan, Touareg, Touran, Transporter T4, T5- includes: pressure plate, adapter, rotary device (right hand thread)
- for common rail engines, up to 6 injectors- suitable for various injector brands- determination of the runback volume via glass tubes or measurement cartridges- includes 6 glass tubes, 6 measurement cartridges with 70 cm conecting lines, mounted on aluminium bar with hooks- includes 24 adaptors for Denso C3, C1, Siemens C3, Delphi, Bosch
- allows easy and damage-free removal of tie rods and other ball joints- low profile, suitable for most vehicles- three foot sizes allow use on most cars and light commercial vehicles- includes the following extractors: 23 mm foot opening, 55 mm pressure wide 28 mm foot opening, 55 mm pressure wide 34 mm foot opening, 63 mm pressure wide
- forged and hardened carbon steel- for pulling and pushing wheel hubs and bearings, with built-in suspension strut- incl. 9 pressure adaptors with outside diameters: 55,5 - 59 - 62 - 65 - 66 - 71,5 - 73 - 78 - 84 mm- pressure sleeve (with counterholding plate): 75.5 - 83 mm inner diameter- pressure sleeve (open on both sides): 69 mm inner diameter- 295 mm ball bearing spindle
- suitable for cars and motorcycles- includes the following 3/8" tools- ratchet- spark plug sockets 16-18-21 mm- 75 mm extension bar- 150 mm extension bar
- galvanized
- galvanized- in polybag
- with holes- galvanized
- with holes- galvanized
- protects against damage to painted coated and wooden surfaces- diameter: 40 and 60 mm
- for modeling and artwork, for precise cutting of vinyl, paper, cardboard, etc.- 3 cutter holders- 13 different blades with straight, angled and round cutting blades in different sizes
- 2PR tire on plastic rim- wheel diameter: 260 mm- wheel width: 85 mm- shaft diameter: 20 mm, hub width: 75 mm- max. load capacity: 150 kg- recommended air pressure: 2 bar
- is used when aligning e.g. furniture, flooring, etc. and in the automotive sector- includes following chocks: 4 pcs. per size: 1 - 2 - 3 - 4 - 5 - 6 mm
777
No
tize
n /
No
tes
778
Stic
hw
ortv
erz
eic
hn
isD
Bezeichnung Seite
AAbdrücksatz Turbolader 744Abisolierzange 690Abkantbank 750Abzieher (Einspritzpumpenrad) 730Abzieher (Vorderradlager) 707Abziehersatz 698Achsmanschettenzange 693Achsmutterneinsätze Motorrad 733-735Achspielprüfer 700Adapter Bremskolbenrücksteller 697Altöl-Aufnahmebehälter 770Anhänger-Beleuchtung 772Anhänger-Steckdosen 773Anhänger-Steckdosen-Prüfer 743Anschleifvorrichtung 689Antriebswellen-Einziehsatz 700Arbeitshandschuhe 763Armaturenschutz-Set 709Auffangkanister (Öl) 739Ausbeulhaken 711Ausbeulhammer 689Ausbeulsatz 712Ausbeulstift 713Ausblaspistolen 756Auspuffrohr-Aufweitungssatz 768
BBandschellensatz 761Bastlermesser 776Batterie-Adapter 757-758Batterie-Notschalter 757-758Becherhalter 747Biteinsätze 681-683Bithalter 681Bitknarren 684Bit-Sets 765Bohrer 686-688Bohrer-Anschleifvorrichtung 689Bohrfutterschlüssel 687Bördelgerät 694, 769Bördelgerät (Kotflügel) 711Bördelzange 712Bremsen-Durchschläger 695Bremsen-Entlüfter 696, 771Bremsen-Entlüfterschlüssel 697Bremsflüssigkeits-Nachfüller 696Bremsgewinde-Reparatur 694Bremskolben-Rückstelladapter 697Bremskolbenrücksteller 697, 773Bremssattelbürste 695Bremsscheiben-Messschieber 697Bügelmessschrauber 743Bürste (Bremssattel) 695
CCDI-Vorkammer-Einsatz 730CLIC-Schlauchschellenzange 693Common-Rail-Tester 774
DDämmstoffmeser 763Dichtband 762Dieselfilter-Montageset 739Dieselfilter-Spezialeinsatz 715Diesel-Service-Füllpumpe 742
Bezeichnung SeiteDigital-Lötstation 759Digital-Thermometer 745Doppel-Bördelgerät 694Doppelgelenk-Zangensatz 767Doppel-Gummisauger 712Doppelringschlüssel 685Doppelvanos-Einstellwerkzeug 723Drahtseilwinde 757Drehmomentschlüssel 752Drehomentschrauber 752Dreikant-Einsätze 680Druckluft-Bremsenentlüfter 696Druckluft-Filter 754Druckluft-Öler 754Druckluftschlauch 757Druckluftwerkzeuge 753-757, 768Druckpumpen-Set 741Ducati-Werkzeuge 733-735Durchstechahle 713, 760Durschläger 695
EEinfülltrichter (Öl) 740Einspritzpumpenrad-Abzieher 730Einstich-Thermometer 745Eintreibersatz (Lager) 702Eiskratzer 764Entgrater 688Entlüfterschlüssel (Bremse) 697Exzenterschleifer 755
FFarbsprühpistole 755Federbandschellenzange 690Federspanner Upside-Down-Gabel 733Federtellerzange (Trommelbremse) 695Feilen 689Felgenschloss-Demontage 716Fixierklammern 713Folien-Plakettenradierer 761Fräsbohrer 688Fräsersatz 709Frontwischer-Reparatursatz 710
GGabelkappenschlüssel 733Gasbrenner 763Getriebestütze 749Gewinde-Reparatursatz 772Gleithammer 769Glühkerzen-Reparatur 727-728Glühkerzenzange 690Grundloch-Innenlagerabzieher 770Gummibuchsen-Werkzeugsatz 698Gummisauger 712
HHakensatz (Ausbeulsatz) 711Hakenschlüssel 714Hämmer 766-767Hebelpumpe 751Heckscheiben-Waschanlagen-Set 710Hilfsrahmen-Ausrichtungsdorne 701Hinterachsbuchsen-Werkzeug 706-707Holzraspel 689HSS Fräser 688Hydraulisches Bördelgerät 694
Bezeichnung Seite
IInduktions-Heizgerät 759Injektor-Reinigungssatz 731Injektor-Werkzeuge 731-732, 771Innen-6-kant Schraubendreher 685Innenabzieher 769
KKaffeetasse 764Karosserie-Trennmeissel 708Kartonmesser 688Keilriemenschlüssel 685Keilrippenriemen-Werkzeug 729Kettentrenner 736KFZ-Sicherungssatz 760KFZ-Steckschlüsseleinsätze 679-681Knarren 684Knarrenkästen 670-678Knieschutz 746Kolbenring-Zangen 726Kombizangen 692Kotflügel-Bördelgerät 711Kotflügel-Schutzabdeckung 746Krafteinsätze 680-681Kraftstoff-Absauggerät 749Krallengreifer 745Kugelgelenk-Abdrücker 774Kugelgelenk-Abzieherglocken 699Kugelgelenk-Werkzeuge 699Kugellager-Trennmesser 708Kühlmittel-Auffüll-Set 742Kühlsystem-Abdruckgerät 741Kunststoff-Meißel 711Kunststoff-Nietsatz 692Kunststoff-Reparaturset 714Kupfer-Dichtring-Sortiment 762Kupplungskorb-Haltewerkzeug 734Kupplungswerkzeug (Piaggio) 736Kurbelwellen-Arretierstift 720Kurbelwellen-Drehwerkzeug 723Kurbelwellenfixierung 719, 725Kurbewellengegenhalter 723
LLackierständer 710Lager-Eintreibersatz 702Lager-Werkzeugsatz 698Lambdasondenschlüssel 715Längelenkergummi-Werkzeug 707Lecksuchlampe 742Leitungs-Ratschenschlüssel 695Lenkgetriebe-Werkzeug 705Lichtmaschinendeckel-Abzieher 733Lichtmaschinen-Werkzeug 682Linksbohrer 686LKW Ölwanne 751LKW-Kühlsystem-Abdruckgerät 741LKW-Steckschlüsselsätze 676Lötstation 759Luftrad 776L-Winkel 775
779
Sti
ch
wo
rtve
rze
ich
nis
D
Bezeichnung Seite
MMagnet-Becherhalter 747Magnetheber 745Magnethalter 745Maul-Ringschlüssel 684-685Maurerhammer 767-767Mehrzweckschrauben 775Meißel (Kunststoff) 711Messingbürste 695Messschieber f. Zollschrauben 742Messschieber (Bremsscheiben) 697Messschieber-Zubehör 744Messuhr 743Metallsägeblätter 762Mini-Maulringschlüssel 684Montagescheibensatz 706-707Montagewagen 714Motor-Einstellsätze 717-724Motorradgabel-Werkzeug 732Motorradketten-Nietwerkzeug 736Motorrad-Werkzeuge 732-736Motortraverse 749Multischlüssel 766
NNadelzange 690Nietpistole 755Nietwerkzeug f. Motorradketten 736Nockenwellenarretierung (KFZ) 719,725Nockenwellenarretierung (Ducati) 734Nockenwellenräder-Gegenhalteschl. 729Nüsse 677-681Nusskästen 670-678
OOBDII Auslesegerät 743Ölabsauggerät 696Öl-Auffangkanister 739Öl-Aufnahmebehälter 770Öldienstschlüssel 737-739Öl-Einfüllhilfen 740Ölfilter-Ausbauwerkzeug 739Ölfilterkappen 737-739Ölfilterschlüssel 737-739Ölwanne (LKW-Achse) 751Ösen-Sortiment 762
PPfostenschloss-Einsätze 680Pinzette 690Plakettenradierer 761Polierscheiben 760Polradabzieher 735-736Polrad-Abziehkreuz 735Präzisionsmesser 776Pressbacken 691Presse 747PTFE Dichtband 762
QQuad-Wagenheber 748Querlenkerbuchsen-Werkzeug 704-705
Bezeichnung Seite
RRad 776Radbolzen-Nachschneider 715Radialdichtring-Auszieher 732Radlager-Nabeneinheit-Werkzeug 702-703Radlager-Werkzeuge 702-704, 774Radmutterneinsatz 680Radnaben-Abziehadapter 702Radnaben-Werkzeug 705Rangier-Hubwagen 748Ratschen 684Ratschenschlüssel 677, 695Ratschen-Werkzeughalter 688Reflektor 772Reifenventil-Einziehwerkzeug 716Reifenwulst-Niederhalter 746Reparaturset für Bremsgewinde 694Ringschlüssel 684-685Rohrbiegezange 751Rohr-Entgrater 688Rohrsteckschlüssel 678Rollblechschere 751Rücklichtleiste 772
SSandstrahlkabine 756Sandstrahlpistole 754Schaber 711Scheiben-Montagewagen 714Scheiben-Schneidedraht 710Schlagschrauber 753, 768Schlagschrauberschlüssel 729Schlauchklemmen-Werkzeug 717Schlauchklemmen-Zangen 692, 717Schlauchschellenzange 693Schleifscheiben 760Schlüssel 684-685Schneidedraht 710Schrauben 775Schraubenausdreher 687Schraubendreher 685-686Schraublocher 763Schraubstock-Schutzbacken 746Schutzbacken f. Schraubstock 746Schutzmatte 746Schweisspunkt-Fräser 709Schwungrad-Arretierung 725Seitenschneider 691Sicherheitsmesser 688Silentlager-Werkzeugsatz 699-700Spaltmasslehren 713Spannzange 691Spitzpinzette 690Splintentreiber 686Sprühpistole 755Stahldraht-Bürstensatz 767Stahlleitungs-Verschlussklemmen 716Steckdosen-Prüfer 743Steckschlüssel (Multischlüssel) 766Steckschlüsseleinsätze 677-681Steckschlüsselsätze 670-678, 766Stehbolzen-Ausdreher 680Steuerketten-Montage 720Steuerketten-Nietgerät 726Stoßdämpfer-Werkzeugsatz 701Stuhlwinkel 775Sturzeinstell-Werkzeug 701
Bezeichnung Seite
TTankgeber-Schlüssel 716Taschen-Gasbrenner 763Teile-Waschgerät 750Telefonzangen 692T-Griff 683T-Griff-Steckschlüsselsatz 765Thermometer 745T-Profil-Werkzeugset 678Traggelenk-Zapfenschlüssel 700Trennmeissel 708Trennmesser f. Kugellager 708Trennscheiben 761Trennschneider 753, 754Trommelbremsen-Zange 695Turbolader-Abdrücker 744Türpuffer 776T-Winkel 775TX-Biteinsätze 681
UUnterlegkeile 776UV-Lecksuchlampe 742
VVacuum-Ausbeulsatz 712Vakuumpumpe, 741, 771Ventil-Einziehwerkzeug 716Ventilfeder-Montage 769Ventilfräser-Satz 726Ventilschaft-Dichtringzange 730Verbindungsarmaturen-Klemmgripzange 762Vergaser-Schraubendreher 686Verkaufsdisplay Steckschlüssel 677Verlängerungen 683Verschlussklemmen 716Vorderachsen-Ausrichtwerkzeug 735Vorderradlager-Abzieher 707Vorkammer-Einsatz 730
WWagenheber 748Wandpuffer 776Waschgerät 750Werkstattpresse 747Werkstattwagen 747Werkstattwagen-Einlagen 752Werkzeughalter 688Winkel 775Winkelbohrvorsatz 688Winkelschlüssel 686
ZZahnriemenschlüssel 685Zangen 690-693Zapfenschlüssel (Traggelenk) 700Zierleistenkeile 711Zollgrößen-Messschieber 742Zündkerzeneinsätze 679Zündkerzen-Reparatur 728Zündkerzen-Werkzeug 775Zweimassenschwungsrad-Prüfgerät 744
780
Alp
ha
be
tica
l Ind
ex
GB
Description Page
AAir Brake Bleeding Tool 696Air Cutter 754Air Filter / Oiler Unit 754Air Grinder 753Air Hose Reel 757Air Tools 753-757Alternator Cover Puller (Ducati) 733Alternator Tool Set 682Angled Drill Head with Keyless Chuck 688Audi Wheel Hub Tool 705Automatic Bit Holder 681Automotive Sockets 679Axle Boot Kit Clamp Pliers 693Axle Nut Sockets (Motorcycle) 733-735Axle Tolerance Testing Tool 700
BBall Bearing Separators 708Ball Joint Extractor 774Ball Joint Tools 699Band Clamp Set 761Barrel Pump 751Barrier Sockets 680Battery Adapters 757-758Battery Emergency Switch 757Bearing and Bushing Tool Set 698Bearing Mounting Tool Set 702Bench Vise Jaw Protector 746Bit Holder 681Bit Ratchets 684Bit Sets 765Bit Sockets 681-683Bits 682Blind Hole Inner Puller Set 770Blow Guns 756Body Cutting Chisel Set 708Bracket Kit 775Brake Bleeder 771Brake Bleeder Wrench Set 697Brake Bleeding Tools 696Brake Disc Caliper 697Brake Fluid Refill Bottle 696Brake Piston Adapters 697Brake Piston Pressure Plate 697Brake Piston Resetting Tool 697, 773Brake Thread Repair Kit 694Brass Caliper Brush 695Brush 695Buffer 776Buhsing and Bearing Tool Set 698Bushing Tools 704-707
CCable Installation Piercing Awl 760Cable Stripper 690Caliper Accessory Kit 744Caliper for Inch Screws 742Camber Adjusting Tool 701Camshaft Locking Tools 719-725Camshaft Locking Tools (Ducati) 734Camshaft Sprocket Counterholder 729Carburetor Screwdriver 686Chain Breaker 736Chain Riveting Tool 736Chisel Set 708
Description PageChocks 776Clamp Locking Pliers 762Claw Tool 745CLIC Type Collar Pliers 693CLIC-R Hose Clip Pliers 717-724Clutch Basket Holding Tool (Ducati) 734Clutch Tool (Piaggio) 736Coffee Cup 764Collar Pliers 693Combination Pliers 692Combination Spanners 684Common Rail Tester 774Coolant Filling Set 742Cooling System Tester 741Copper Sealing Ring Set 762Counterholder for Camshaft Sprockets 729Crankshaft Counterholders 723-725Crankshaft Locking Pin 720Crankshaft Locking Tool 725Crankshaft Rotating Tool 723Crimping Jaws 691Cup Holder 747Cutters 688, 726, 776Cutting Discs 761Cutting Wire 710
DDashboard Protectors 709Dent Removal Pen 713Dent Repair Hooks 711Dent Repair Kit 712Dial Gauge 743Diesel Filter Removal Tool 739Diesel Filter Socket 715Diesel Service Filling Pump 742Digital Dial Gauge 743Digital Micrometer 743Digital Thermometer 745Door Buffer 776Double Flaring Tool 694Double Joint Pliers 767Double Ring Spanners 685Drill Chuck Wrench 687Drill Grinding Attachment 689Drills 686Driveshaft Pulling Tool Set 700Drum Brake Pliers 695Ducati Tools 733-735
EEccentric Sander 755Electronic Soldering Station 759Engine Support 749Engine Timing Tool Sets 717-724EOBD Trouble Code Reader 743Exhaust Pipe Expander Set 768Extension Bars 683Eyelet Set 762
Description Page
FFarm Jack 748Fender Flairing Tool 711Fender Protection Cover 746Fiiling Pump 742File Set 689Fitting Clamp Locking Pliers 762Fixing Clamp Set 713Flairing Pliers 712Flaring Tool 694, 769Floor Jacks 748Flywheel Locking Tool 725Flywheel Puller 736Flywheel Testing Tool 744Foil Eraser 761Folding Bench 750Fork Cap Wrench 733Front Axle Alignment Tools (Ducati) 735Front Wheel Bearing Puller 707Fuel Extracting Unit 749Fuel Tank Wrench Set 716Funnels 740Fuse Set 760
GGap Gauges 713Gas Torch 763Gearbox Support 749Gloves 763Glow Plug Pliers 690Glow Plug Repair Tools 727-728Grinding Discs 760
HHacksaw Blades 762Hammers 766-767Hexagon Key Set 686Hexagon Screwdrivers 685Hole Punch 763Hook Wrench Set 714Hose Clamp Pliers 690-692Hose Clamp Tool 717-724Hose Clip Pliers 717-724HSS Rotary Burrs 688Hydraulic Flaring Tool 694Hydraulic Floor Jacks 748Hydraulic Workshop Press 747
IIce Scraper 764Impact Sockets 680-681Impact Wrenches 753, 768Impact Wrench (Manual) 729Inch Screw Caliper 742Induction Heater 759Injector Extractor Tools 732, 771Injector Pullers 730-731Injector Pump Sprocket Puller Set 730Injector Seat and Manhole Cleaning Set 731Installation Disc Set 706Insulating Material Knife 763Internal Hexagon Key Set 686Internal Hexagon Screwdriver Set 685Internal Puller Set 769
JJaw Protector 746
781
Alp
ha
be
tic
al In
de
xGB
Description Page
KKnee Protector Mat 746Knife for Insulating Material 763
LLeak Detector 742Left Cutting Drills 686Lever Pump for Plastic Barrels 751Line Ratchet Wrench Set 695Line Stopper Set 716Long Nose Pliers 692
MMagnetic Cup Holder 747Magnetic Socket Holder 745Mallet 689Manual Impact Wrench 729Megnetic Lifter 745Metal Band Pliers 691Micrometer 743Motor Timing Tool Sets 717-724Motorcycle Fork Fill Tool 732Motorcycle Tools 732-736
NNeedle Pliers 690
OOBDII Trouble Code Reader 743Öhlins Fork Cap Wrench 733Oil Container 739, 770Oil Extractor Units 696Oil Filter Cap Set 737Oil Filter Removal Tool 739Oil Filter Wrenches 737-738Oil Funnels 740Oil Plan for Truck Axles 751Oil Service Tools 737-740Open Ring Spanners 685Oxygen Sensor Wrenches 715
PPaint Spray Gun 755Painting Stand 710Parts Washer 750Piaggio Clutch Tool 736Piercing Awl 713, 760Pin Drivers 686Pin Wrench 700Pipe Expander Set 768Pipe Reamer 688Pipe Socket Wrench 678Piston Ring Pliers 726Plastic Chisels 711Plastic Chocks 776Plastic Repair Kit 714Plastic Rivet Kit 692Pliers 690-693Pneumatic Fuel Extracting Unit 749Polishing Discs 760Pre-Chamber Socket 730Pressure Plate 697Pressure Pump Set 741Protection Cover 746PTFE Seal Tape 762Puller Set 698Punch Set 695
Description Page
RRadiator Test Set 741Rasp Set 689Ratchet Sets 670-678Ratchet Wrench Set 677, 695Ratcheting Tool Holder 688Ratchets 684Ratchets for Bits 684Rear Axle Bush Tools 706-707Rear Window Washer System Repair Kit 710Reflector Set 758Reversible Ratchets 684Ribbed Belt Tools 729Rim Lock Dismantling Tool Set 716Riveter 755Riveting Kit 692Riveting Tool for Motorcycle Chains 736Rotary Burrs 688Rotor Pullers 735Rubber Suction 712
SSafety Cutter 688Sand Blasting Gun 754Sandblasting Cabinet 756Saw Blades 762Scrapers 711Screw Extractors 687Screw Hole Punch 763Screwdrivers 685Screws 775Seal Ring Extractor Tool 732Seal Tape 762Sheet Metal Rool Shears 751Shock Absorber Tool Kit 701Side Cutters 691Silent Block Tool 699, 700Slide Hammer 769Socket Sales Display 677Socket Tester 743Sockets 677-681Socket Sets 670-678, 766Soldering Station 759Spanners 684-685Spark Plug Repair Tools 728Spark Plug Sockets 679Spark Plug Tool Set 775Spot Weld Cutters 709Spring Plates Pliers 695Spring Tensioner for Upside-Down Fork 733Steel Bracket Kit 775Steel Line Stopper Set 716Steel Wire Brush Set 767Steering Tool 705Stud Bolt Extractor 680Subframe Positioning Bolt Set 701Suspension Joint Wrench 700Swivel T-Handle 684
TT5 Subframe Tool 701T-Handle 683-684T-Handle Socket Wrenches 765Thermometer 745Thread Repair Kit 772Timing Belt Wrenches 685Timing Chain Mounting Tool 720
Description PageTiming Chain Riveting Tool 726Timing Tool Sets 717-724Tip Tweezer 690Tire Bead Retainer 746Tire Valve Replacing Tool 716Tool Trays 752Torch 763Torque Wrenches 752Trailer Lamps 772Trailer Plug 773Trailer Reflector 758, 772Trailer Socket 773Trailer Socket Tester 743Trailer Taillight Bar 772Trailing Arm Bushing Tool 707Trim Wedges 711Trolley XL 747Trouble Code Reader 743Truck Cooling System Tester 741T-Star Tool Set 678Tube Bending Pliers 751Turbo Charger Testing Tool 744Tweezer 690TX Ball Head Sockets 681
UUV Leak Detector 742
VVacuum Dent Repair Kit 712Vacuum Pump and Brake Bleeder 771Vacuum Pump Set 741Valve Replacing Tool 716Valve Seat Milling Cutters 726Valve Spring Tools 769Valve Stem Seal Pliers 730Vanos Adjustment Tool 723V-Belt Wrenches 685Vernier Caliper Accessory Kit 744
WWall Buffer 776Washer System Repair Kit 710Waste Oil Container 739, 770Wheel 776Wheel Bearing Tools 702-704, 774Wheel Hub Puller 702Wheel Hub Tool 705Wheel Locking Nut Socket 680Wheel Stud Repair Tool 715Window Cutting Wire 710Windshield Carrying Tool Cart 714Wiper Repair Kit 710Wire Brush Set 767Wire Rope Winch 757Wishbone Bushes Tools 704-705Work Gloves 763Workshop Press 747Workshop Trolley XL 747Wrench (8-in-1) 766
782
Ind
ex A
lph
ab
étiq
ue
F
Description Page
AAccessoires pied à coulisse 744Adaptateur batterie 757-758Adaptateur repousse-pistons 697Affûteuse de mèches 689Aimant flexible 745Aligneur de cadre 701Alternateurs (outillage) 682Arrache à inertie 769Arrache rotules 699Arrache-garnitures 709Arrache-volant 735-736Aspirateur de carburant 749Assortiment TX 678Attaches de fixation 713
BBac à huile 751Bac de nettoyage 750Bac de rétension 751Bac de vidange 739Bac vidangeur 739Boîte de douille camions 676Boîtes de douilles 670-678Bouche-conduites 716Bougies (réparation) 728Bougies de préchauffage (réparation) 727-728Boulonneuse 753,768Brosse laiton 695Brosse pour freins 695Brosses métalliques (jeu) 767Burin 708Burins plastique 711
CCalage arbre à cames 719,725Calage villebrequin 719,720,725Cale arbre à cames 734Cales à dégarnir 711Cales de protection 776Cales d'épaisseur 713,776Carrossage (outils) 701Catadioptre 772Chaîne de distribution (montage) 720Chalumeau de poche 763Chariot 714Chariot pour vitres 714Chariots voitures 748Chasse-goupilles 695,686Cisaille d'établi 751Ciseaux de carrossier 708Clé à chocs 729Clé démonte jauge 716Clé multiple 766Clé pour fourche 733Clé pour mandrins 687Clés 684-685Clés à ergots 714Clés à filtres 737-739Clés à purger 697Clés à tube renforcées 678Clés à tuyauter raccagnac 695Clés Allen 686Clés dynamométriques 752Clés mixtes 684-685Clés polygonales 684-685
Description PageClés pour sondes lambda 715Clés raccagnac 677,695Cliquet porte-embouts 684Cloches à filtres 737-739Colliers pour soufflets 761Comparateur 743Compresseur de ressorts 733Coupe-chaînes 736Couteau de précision 776Couteau de sécurité 688Couteau isolation 763Cric mécanique 748Cric rouleur 748Crochets 711Crochets à débosseler 711Cutter cartons 688Cutter de précision 776
DDébosseleur d'ailes 711Débosseleur sous vide 712Décolle-autocollants 761Décolleur pour autocollants 761Décolleur roulements 708Démonte boulons de sécurité 716Démonte-soupapes 769Démonte-valve 716Dérive-chaîne 726Diesel (montage du filtre) 739Disques à couper 761Disques à polir 760Disques à polis 760Disqueuse 753,754Douille à ergots 700Douille filtre diesel 715Douille pré-chambre 730Douillepour boulons de roues 680Douilles 677-681Douilles à choc 679-681Douilles bougies 679Douilles crantées 733-735Douilles emmanchées 765Douilles et assortiments 677-681Douilles impact 680-681Douilles triangulaires 680Douilles-embouts 681-683Douilles-embouts TX 681Ducati outillage 733-735
EEbavureur 688Eclairage remorque 772Embrayage Piaggio (outil) 736Emporte-pièces 763Enrouleur à air 757Entonnoir pour huile 740Equerres 775Equerres en T 775Evaseur 688Evaseurs d'échappement 768Extracteur (pompes injection) 730Extracteur d'arbres 700Extracteur de cache Ducati 733Extracteur de caoutchouc bras-oscillant 707Extracteur de goujons 680Extracteur de joints 732
Description PageExtracteur de roulements 698-704,770,774Extracteur de silentblocs 698,704-705Extracteur de vis 687Extracteur intérieur 769Extracteur pompes à injection 730Extracteur roulement avant 707
FFil pare-brise 710Filtre 754Fraises 688Fraises HSS 688Fraises pour sièges de soupapes 726Freins (réparation de filets) 694Fusibles (assortiment) 760
GGants de travail 763Goupilles de freins 695Gratte-givre 764Grattoirs 711
HHuileur 754
IInjection outillage 731-732,771Interrupeur de sécurité 757-758
JJeu de douilles 670-678,766Jeu d'embouts 765Jeu d'extracteurs 698Jeux de douilles 670-678Joints cuivre (assortiment) 762
KKit de calage 723Kit de débosselage 712Kit de nettoyage injecteurs 731Kits de calage 717-724
LLame de scie 762Lampe UV de détection 742Lecteur OBDII 743Levier de calage 729Levier démonte-poulies 729Levier pour villebrequin 723Limes 689Liquide de refroidissement (remplissage) 742
MMandrin coudé 688Marteau à débosseler 689Marteau bâtiment 767-767Marteaux 766-767Mèche à dépointer 709Mèches 686-688Mèches gauches 686Mesureur boulons en pouce 742Micromètre 743Mini clés mixtes 684Modules vides 752Mors 691Mors pour étaux 746Motos (outillage) 732-736
783
Ind
ex A
lph
ab
éti
qu
eF
Description Page
OŒillets 762Outil à border les ailes 711Outil à induction 759Outil de blocage 725Outil de montage avant 735Outil pour embrayage 734Outil pour pneus 746Outillage direction 705Outillage essieu arrière 706-707Outillage moyeux 705Outillage pneumatique 753-757,768Outils pour colliers 717
PPied à coulisse pour freins 697Pince colliers de durits 692,717Pince à border 712Pince à cintrer 751Pince à colliers 690-693Pince à dénuder 690Pince à ressorts de freins 695Pince à segments 726Pince becs fins 690Pince capuchons 690Pince colliers clic 693Pince colliers de soufflets 693Pince coupante 691Pince grip à sertir 762Pince joints de soupapes 730Pince ressorts de tambours 695Pince téléphone 692Pince universelle 692Pinces 690-693Pinces double charnière 767Pincette magnétique 745Pincettes 690Pistolet de peinture 755Pistolet de sablage 754Plateaux de montage 706-707Plieuse 750Poignée T 683Pointe alène 713,760Pointeau à débosseler 713Pompe à levier 751Pompe à mise sous pression 741Pompe pression-dépression 741,771Ponceuse excentrique 755Porte-embouts 681Porte-flacons 747Porte-outils 688Porte-outils à cliquet 688Poste de sablage 756Pouces (mesureur) 742Poulies (clés) 685Présentoir de douilles 677Presse à collets 694,769Presse à collets double 694Presse à collets hydraulique 694Presse d'atelier 747Presse d'établi 747Prise remorque 773Protecteur d'ailes 746Protège-sols 776Purgeur de freins 696
Description Page
RRaccagnacs 684Rallonges 683Rampe lumineuse arrière 772Râpes à bois 689Remplisseur de pompe à mazout 742Remplisseur pour fourches 732Remplisseur pour freins 696,771Réparateur de goujons 715Réparation de filets 772Réparation de filets d'étriers 694Réparation plastique sur accu 714Repousse-pistons 697,773Rive-dérive chaînes 736Riveteuse pneumatique 755Rivets plastiques (jeu) 692Roue 776Roue à air 776Roulement avant (outillage) 707
SServante d'atelier 747Set de clés à bougies 775Set de fraises 709Set d'outils pour suspension 701Set réparation essuie-glace 710Set réparation lave-glace 710Silentblocs (extracteur) 699-700Souflette 756Station de soudure 759Station de soudure digitale 759Support magnétique 747Support moteur 749Support pour peinture 710
TTapis de protection 746Tapis genouillères 746Tasse 764Testeur bi-masse 744Testeur circuit de refroidissement 741Testeur de common rails 774Testeur de jeu des axes 700Testeur de prises 743Testeur de refroidissement 741Testeur de turbos 744Testeur prise attache-remorques 743Testeur turbo 744Thermomètre 745Tournevis 685-686Tournevis allen 685Tournevis carburateur 686Tournevis dynamométrique 752Treuil 757
UUV lampe de détection 742
VVentouse caoutchouc 712Ventouses doubles 712Vidange 740Vidangeur 696Vidangeur par gravité 770Vis 775Vis à bois 775
784
Índ
ice
Alfa
bé
tico
EE
Descripción Página
AAbocinador 694,769Abocinador Hidráulico 694Abrazaderas de Banda, Juego 761Accesorios de Calibre, Juego 744Adaptadores de Bateria 757-758Ajuste de Caida, herramienta 701Ajuste de Vanos, herramienta 723Alargaderas 683Alicate de corte lateral 691Alicate de Muelles de Zapata 695Alicate de Puntas largo 692Alicate para bandas metálicas 691Alicate para cierre de Abrazaderas 762Alicate para Tambor de Freno 695Alicates 690-693Alicates Abocinadores 712Alicates Combinados 692Alicates de ajuste y bloqueo de Abrazaderas 762Alicates de boca larga 690Alicates de doble Eje 767Alicates del Sello del Vástago de Válvulas 730Alicates para Abrazaderas 690-692Alicates para Abrazaderas del Eje 693Alicates para Anillos de Pistones 726Alicates para Calentadores 690Alicates para Cip de Tubo CLIC-R 717-724Alicates para Clip´s 717-724Alicates para Collarines 693Alicates para collarines de CLIC 693Alicates para Dblar Tubos 751Alineación del Eje delantero (Ducati) 735Amoladora Neumática 753Amortiguación, Juego 701Arandelas de Cobre, Surtido 762Asiento de Válvulas, Fresado y Corte 726
BBanco de Plegado 750Bandejas para Herramientas 752Barra de señalización para Remolques 772Bastidor, Juego de Pernos de Posicionamiento 701Bloqueo de Volante Motor, herramienta 725Bloqueo del Arbol de Levas (Ducati), herramientas 734Bloqueo del Arbol de Levas, herramientas 719-725Bloqueo del Cigüeñal, herramienta 725Bomba de Barril 751Bomba de Llenado 742Bomba de Llenado Diesel 742Bomba de palanca para barriles de plástico 751Botadores 686Botella para Cambio de Liquido de Freno 696Brocas 686Brocas de corte Izquierdo 686Buje del Brazo, herramienta de Arrastre 707Bujias. Juego de herramientas 775
Descripción Página
CCabina de Arenado 756Cable de Corte 710Cable de Corte para Ventanas 710Cabrestante 757Calado de Distribución 717-724Calados de Motor, Juegos 717-724Calentador de Inducción 759Calibre de discos de Freno 697Calibre de Tornillos en Pulgadas 742Calibre para tornillos en Pulgadas 742Calibre y Accesorios, Juego 744Carracas 684Carracas para Puntas 684Carracas Porta Puntas 684Carracas Reversibles 684Carracas, Juegos 670-678Carro de Herramientas XL 747Carro porta Parabrisas 714Carro XL 747Cazoletas de Aceite, Juego 737Cepillo 695Cepillo Latón para Pinza de Freno 695Cepillos de Acero, Juego 767Cinceles de Corte para Carroceria, Juego 708Cinceles de Plástico 711Cinceles, Juego 708Cinta de Sellado 762Cizalla para Laminas Metalicas en rollo 751Cojinetes de Trapecios, herramientas 704-705Cojinetes del Eje Trasero, herramientas 706-707Cojinetes y Rodamientos, Juego 698Cojinetes, herramientas 704-707Comprobador de Common Rail 774Comprobador de luces de Remolque 743Comprobador de Presión de Radiadores 741Comprobador de Radiadores, Juego 741Comprobador de Sistemas Turbo, herramientas 744Contenedor de Aceite 739,77Contenedor de Aceite usado 739,77ConTrol y Llenado de Horquillas, herramientas 732Coprobador de Volante Motror, herramientas 744Coprobadores 743Correas Acanaladas, herramienta 729Cortador de puntos de Soldadura 709Cubos de Rueda Audi, herramientas 705Cuchillo para material Aislante 763Cuñas 776Cuñas de Corte 711Cuñas de Plástico 776Cutter de Seguridad 688Cutter Neumático 754Cutters 688,726,776
DDesmontaje del Bloqueo de Llantas, Juego 716Destornillador de Carburadores 686Destornilladores 685Destornilladores Hexagonales 685Detector de Fugas UV 742Dirección, herramientas 705Disco de Goma 761Discos de Corte 761Discos de Instalación, Juego 706Discos de Pulido 760Ducati, herramientas 733-735
Descripción Página
EEmbrague Piaggio, herramienta 736Embudos 740Embudos de Aceite 740Enchufe para Remolques 773Enrollador de Manguera de Aire 757Ensanchamiento de Aletas, Herramienta 711Escariador de Tubos 688Escuadras de Acero, surtido 775Estación de Soldadura 759Estación de Soldadura Electronica 759Expansores de Tubos de Escape, Juego 768Extactor de Volante Motor 736Extractor de Aceite 696Extractor de agujero interior ciego, Juego 770Extractor de Cojinetes del Eje Delantero 707Extractor de Combustible 749Extractor de Cubos de rueda 702Extractor de Filtros de Aceite, herramienta 739Extractor de Inyectores 730-731Extractor de Inyectores, herramientas 732,771Extractor de Rodamientos 708Extractor de Rótulas 774Extractor de Sellos de Anillos 732Extractor de Tapa de Alternador (Ducati) 733Extractor de Tornillos 687Extractor de Tuercas 680Extractor del Piñón de la Bomba de Inyección 730Extractor del Rotor 735Extractor Neumático de Combustible 749Extractores Internos, Juego 769Extractores, Juego 698
FFijador del Piñón del Arbol de Levas 729Fijador y Giro del Cigúeñal 723-725Filtro de Aire/ Lubricador 754Formones, Juego 689Fusibles, Juego 760
GGalgas 713Ganchos de reparación de Abolladuras 711Gato de Campo 748Gato de Carretilla 748Gira Machos 688Giro del Cigúeña,, herramienta 723Guantes 763
HHerramienta con Garras 745Herramienta de Sujección de Cesta del Embrague (Ducati) 734Herramienta para Embrague (Piaggio) 736Herramientas Neumáticas 753-757Herramientas para Abrazaderas 717-724Herramientas Torx, Juego 678Herramiente para Bastidor, T5 701Hojas de Sierra 678,762
IImán Flexible 745Interruptor de Emergencia para Baterias 757
785
Índ
ice
Alf
ab
éti
co
E
E
Descripción Página
JJuego de Fijación de Abrazaderas 713Juego para Alternador 682Juegos de Vasos (Autoclés) 670-678,766
LLámparas para Remolques 772Lavadora de piezas 750Lector de Codigos de Error 743Lijadora Excentrica 755Limas, Juego 689Limpieza de Boca y Asiento de Inyectores, Juego 731Llave 8 en 1 766Llave de Apriete Portabrocas 687Llave de Impacto Manual 729Llave para Articulació de Suspensión 700Llave para Tapa de Horquilla 733Llave para Tapa de Horquilla Öhlins 733Llaves 684-685Llaves Allen, Juego 686Llaves Combinadas 684Llaves con Carraca, Juegos 677,695Llaves de Cambio de Filtros Diesel 739Llaves de Carraca para Tubos, Juego 695Llaves de Filtros de Aceite 737-738Llaves de Gancho, Juego 714Llaves de Tubo 678Llaves de Vaso con mango en T 765Llaves Dinamometricas 752Llaves doble Anillo 685Llaves para Racores 685Llaves Poleas Tensoras 685Llenado de Refrigerante, Juego 742
MMartillo Desñizante 769Martillos 766-767Mazo 689Mechero 763Micrométro 743Micrometro Digital 743Montaje de Cadena de Distribución, herramienta 720Mordaza de Terminales 691Motos, herramientas 732-736Muelas 688Muelas HSS 688Muelles de Válvulas, herramientas 769
OOjales, Juego 762
Descripción Página
PPelacables 690Pin de bloqueo del Cigüeñal 720Pinzas 690Pinzas de Punta 690Pistola Arenadora 754Pistola de Pintura 755Pistolas de Aire 756Pistolas de Impacto 753,768Pistón de Frenos, Adaptadores 697Plato de Presión 697Porta Brocas Angular 688Porta Llaves deVaso Magnetico 745Porta Puntas 681Porta Puntas Automático 681Porta Vasos 747Porta Vasos en T 683-684Porta Vasos en T con Soporte Giratorio 684Porta Vasos Magnetico 747Precamara, Vaso 730Prensa 747Prensa Hidráulica 747Protector de Aletas 746Protector de Mordazas de Tornillo de Banco 746Protector de Muro 776Protector de Puertas 776Protector de Rodillas 746Protectores de Garras 746Protectores de Salpicadero 709Punta para Eliminar Abolladuras 713Puntas 682,77Punzón de Perforación 713,760Punzón perforador para lainstalación de Cables 760Punzones, Juego 695
RRaparador de Pernos de Rueda 715Rascador de Hielo 764Raspadores 711Recogedor de Aceite para Ejes de Camión 751Reflectores para Remolques 758,772Reflectores, Juego 758Reloj Comparador 743Reloj Comparador Digital 743Remachador de Cadenas de Motos 736Remachador de Cadena de Distribución, herramienta 726Remachador y desmontador de Cadenas 736Remachadora 755Remachadora Plástico, Juego 692Remaches de plástico, Juego 692Reparación de Bujias, herramientas 728Reparación de Calentadores, herramientas 727-728Reparación de Limpiaparabrisas, Juego 710Reparación de Roscas, Juego 772Reparación del Sistema de Limpieza Traseso, Juego 710Reparación del Sistema de Limpieza, Juego 710Reparador de Abolladuras de Vacio, Juego 712Reparador de Abolladuras, Juego 712Reparador de Plásticos, Juego 714Reparador de Roscas de Freno 694Reposicionador de pistones de Freno 697,773Rodamientos y Cojinetes, Juego 698Rodamientos, herramientas 702-704,774Rodamientos, herramientas de Montaje 702Rompe Cadenas 736Rotulas, Herramientas 699Rueda 776
Descripción Página
SSangradores de Freno 696Sellador de Teflón 762Servicio de Aceite. Herramientas 737-740Silent Block 699,700Sonda Lambda, Llaves 715Soporte de Motores 749Soporte para Pintores 710Soporte para Rectificado de Brocas 689Suportes de Acero en T 775
TTalón de Retención 746Tanque de Combustible, Juego de Llaves 716Tapones de Tubos de Acero, Juego 716Tapones de Tubos, Juego 716Taza de Café 764Tensor del Muelle de Horquilla Invertida 733Termometro 745Termometro Digital 745Testigo de Tolerancia de Eje 700Tirador del Eje de la Transmisión, Juego 700Tornillo de Perforación 763Tornillos 775
VVacuometro 771Vacuometro y Bomba de Frenos 771Vacuometro, Juego 741Válvulas de Ruedas, herramienta de remplazo 716Vaso con Espigas 700Vaso de Filtros Diesel 715Vaso de Tuercas de Eje (Motos) 733-735Vaso para Tuerca de Rueda 680Vasos 677-681Vasos, Expositor 677Vasos con Punta 681-683Vasos con Punta TX de Bola 681Vasos de 3 caras 680Vasos de Bujias 679Vasos de Impacto 680-681Vasos para Automoción 679Ventosas 712
786
Alfa
be
tisc
he
Ind
ex
NLNL Beschrijving Pagina
AAandrijfassen trekker 700Aanhangwagen stekkertester 743Aanhangwagen verlichting 772Achteras gereedschap 706-707Acuu kunststof herstelset 714Adapter terugstel gereedschap 697Afbraammes 688Afstelsets 717-724Alternators (gereedschap) 682Assenspel tester 700
BBanden gereedschap 746Batterij adapter 757-758Beitel 708Beker 764Bekken 691Bekken voor bankschroeven 746Bescherminpads 776Bi-masse tester 744Binnentrekker 769Bitsdoppen 681-683Bitset 765Bitshouder 681Bitsratel 684Blaaspistool 756Blokkeer hefboom 729Blokkeergereedschap 725Boorkopsleutel 687Boren 686-688Borenslijper 689Bougiedoppen 679Bougies herstelling 728Bougiesleutelset 775Bougietang 690Bouwhamer 767-767Brandstof zuiger 749Buigtang 751Buizensleutels 678
CCarbu schroevendraaier 686Cardanhoezen spanbanden 761Carrosserie beitels 708Carrosserie houder 710CDI voorkamer dop 730Circlipsverweideraars 711Clictang 693Comman rail tester 774
DDeksel trekker Ducati 733Denudeertang 690Dichtingen trekkerset 732Diesel montageset 739Dieselfilterdop 715Dieselpomp vuller 742Digitaal thermometer 745Digitale soldeerpost 759Diktelemmets 713Diktestukken 776Distributieketting gereedschap 720Doorslagen 686,695Doorslagpunt 713,760Doos potsleutels 670-678,766
Beschrijving PaginaDoppen 677-681Doppen display 677Doppen en toebehoren 677-681Dopsleutels met "T" handvat 765Dozen potsleutels 670-678Draadherstelset 772Draagarmverlijner 701Driekantige doppen 680Drukpompenset 741Dubbele zuignappen 712Ducati gereedschappen 733-735Duimse maten meter 742Duimse maten passer 742Dynamometrische schroevendraaier 752
FFijne bektang 690Filterklokken 737-739Filtersleutels 737-739Fixeerklemmen 713Flessenhouder 747Flexibele magneet 745Frezen 688
GGarniturentrekkers 709Gasbrander 763Gebogen boorkop 688Gereedschapshouder 688Gloeibougies herstelling 727-728Goujontrekker 680Griptang voor verbindingen 762Gummi zuignappen 712Gummitrekker van draagarmen 707
HHaakslijpmachine 753,754Haken 711Haken potsleutel 700Hakensleutels 714Hamers 766-767Handschoenen 763Hevelpomp 751Holpijp 763Houten raspen 689Houtvijzen 775HSS frezen 688Hydraulische kraagpers 694
IIjsschraper 764Impact doppen 679-681Inbus schroevendraaiers 685Inbus sleutels 686Inductie verwarmer 759Injecteurs reinigingset 731Injectie gereedschap 731-732,771Injectiepompen trekker 730Isolatie mes 763
Beschrijving Pagina
KKarton cuttermes 688Ketting gereedschap 736Ketting herstelset 726Kettingsnijder 736Kleppen demonteerset 769Kleppen zittingsfrezen 726Kleppendichting tang 730Kniepad 746Kniptang 691Koelsysteem tester 741Koelvloeistof vulling 742Kogeltrekker 699Koperen dichtingen (set) 762Koppeling gereedschap 734Kraagapparaat 694,769Kraagapparaat dubbel 694Krukkas blokkeerset 719,720,725Krukkas gereedschap 723Kunststof beitels 711
LLagertrekkers 698-704,770,774Lambdasondes sleutels 715Leidingendoppen 716Lichtplaat (achteruit) 772Linkse boren 686Luchtband 776Luchtoproller 757
MMagnetische houder 747Magnetische pinset 745Mecanische krik 748Meetklok 743Messing borstel 695Micrometer 743Mini ringsteeksleutels 684Momentsleutels 752Montage schijven 706-707Motorsteun 749Moto's gereedschap 732-736Multi kanten dopsleutels 733-735Multi-sleutel 766
NNaafgereedschappen 705Nokkenas blokkeerset 719,725,734
OOBDII code lezer 743Oesen 762Olië trechter 740Olië vullers 740Oliëopvangbak 770Oliër 754Oliëzuiger 696Ontluchtsleutels 697Opvangbak 739,751
787
Alf
ab
eti
sc
he
In
de
xNL
Beschrijving Pagina
PPers 747Persluchtfilter 754Persluchtgereedschap 753-757,768Piaggio koppeling (gereedschap) 736Pinsetten 690Plaatschaar 751Plooiapparaat 750Plooitang 712Pneumatische riveteerpistool 755Poeliesleutel 685,729Polijstschijven 760Precisiemes 776Puntlasboor 709
RRatel gereedschapshouder 688Ratel leidingsleutels 695Ratels 684Ratelsleutels 677,695Reflector 772Remborstel 695Remmen (draadherstelling) 694Remmen schuifpasser 697Remmendoorslagen 695Remmenvulapparaat 696,771Remontluchter 696Remtrommeltang 695Remveertang 695Remzuiger terugstel ger. 697,773Remzuigers draadhersteller 694Ringsleutels 684-685Ringsteeksleutels 684-685Rolkrik 748Rolwagen 714,747Ruiten rolwagen 714Ruiten snijdraad 710Ruitensproeier herstelset 710Ruitenwisser herstelkit 710
SSchrapers 711Schroevendraaiers 685-686Schroevenuitdraaier 687Schuifpasser toebehoren 744Schuimmodules 752Schuurmachine 755Segmententang 726Set frezen 709Silentbloks (trekker) 699-705Silentbloks trekkerset 698Slagmoersleutel 753,768Slagsleutel 729Slagtrekker 769Sleutel voor brandstofmeter 716Sleutels 684-685Snijschijven 761Soldeer station 759Spandbanden gereedschap 717Spandbandentang 693Spanklemtang 690-691Spanklemtank 693Sruureinstel 701Stalenborstelset 767Steker aanhangwagen 773Stekkertester 743Stel kunststofrivetten 692Stellen doppen 670-678
Beschrijving Pagina
TT handvat 683T winkelhaken 775Takel 757Tangen 690-693Tangen met dubbele scharnier 767Tekenmes 776Telefoontang 692Thermometer 745Trekkerset 698Turbo systeemtester 744Turbolader tester 744TX assortiment 678TX bitsdoppen 681
UUitdeukhaken 689,711Uitdeukset 712Uitdeukstift 713Uitlaten uitspreider 768Uitspreider 688Universele tang 692UV lek detektor 742UV lektestlamp 742
VVacuum en drukpomp 741,771Vacuum uitdeukset 712Veerspanner 733Veiligheidsbouten demonteerset 716Veiligheidschakelaar 757-758Veiligheidsmes 688Ventiel gereedschap 716Verfpistool 755Veringgereedschappen 705Veringset 701Verlengstuks 683Vijlen 689Vijzen 775Vleugels beschermer 746Vleugels bordelset 711Vleugels uitdeukset 711Vliegwieltrekker 735-736Vooraan lagertrekkerset 707Vooras lagerset 707Vooras monteergereedschap 735Voorkamer potsleutel 730Vorkenvuller 732Vorksleutel 733Vrachtwagens doppenset 676
WWagendragers 748Wandbeschermingen 776Wasbak 750Waterleidingentang 692,717Werplaats pers 747Wiel 776Wielbouten herstelset 715Wielboutendop 680Winkelhaken 775
Beschrijving Pagina
ZZaagblad 762Zak gasbrander 763Zandstraalpistool 754Zandstraaltoestel 756Zekeringen (assortiment) 760Zelfklevers gom 761
788
Art. In
de
x
Art. �124 768137 775167 728341 690344 691345 692347 692348 692349 692351 692353 684354 684368 711416 767439 691479 693499 693562 763568 762708 729868 714993 7321119-1 6971174 7331187 6851223 6761224 6761314 6851410-C 6911415 7571416 7581657 6861690 7081691 7081692 7081693 7081703 7291723 6811724 6811734 6811735 6811736 6811745-8X9 6851930-1 7441938-2 7432029 6952176 7592242 6772255 6802259 6712267 6792269 6792286 6732385 6792386 6792387 6792560 6792565-75 6832731 6862798 7522884 7483011-1 7453011-2 7453011-3 745
Art. �8820 6758999 7719247 7479248 7489871 7639949 7639950 7639951 7639952 76311000 69715111 76619500 77220101 76530420 67850210 68950235 68950608 68850613 77650908 76752326 68962622 71862623 71863311 74366512 69767160 74767203 71367216 69967218 69967302 69867302-M10 69867302-M12 69867302-M14 69867302-M16 69867307 77167310 77468346 72680724 77680756 75780763 74380867 77680921 77580923 77580927 77580944 77580950 77680956 77280958 77280960 77280962 77380964 77380992 77580994 77580998 77581728 763BECHER 764KRATZER 764
Art. �3046 7463151 7453152 7453153 7453157 6963174 7453200 6893245 7533279 7683284 7553286 7543286-1 7543287 7533288 7683317 7553485 7573525 7113859 7663869 7673922 7613923 7613927 7613928 7613999 7614011-5 7524012-5 7524013-5 7524014-5 7524015-5 7524016-5 7524017-5 7524020-5 7524063 7424095 6774110 7474249 6824266 6834498 7624735 6824736 6824800 7464842 6865061 7335062 7335063 7335064 7345065 7345066 7345067 7345068 7355069 7355071 7355080 7095081 7095097 6815098 6825099 6825221 6805351 6815422 7005430 7306249 7746250 7026251 773
Art. �7073 7657075 7667460 6807461 6807462 6807463 6807464 6807685 7097715 7707741 7087742 7087749 7087762 6987776-1 7027800 6837802 6837805 6837849 6787881 7657993 7127996 7128038 7418080 6968080-31 6968080-31-1 6968080-32 6968080-32-1 6968096 7418106 7748127 7608132 7628254 7008262 7008293-1 6998370 7268371 7268374 7268408 6948408-1 6948408-2 6948408-3 6948463 6928463-1 6928463-2 6928463-3 6928463-4 6928486 7068501 7268502 6978505 7408512 6868512-1 6868514 7418514-1 7418514-2 7418514-3 7418514-4 7418514-5 7418514-6 7418514-7 7418514-8 7418514-9 7418523 7428527 717
Art. �8536 7378536-1 7378537 7378537-1 7378542 7148543 7108547 6878548 6878549 6878553 7398556 7698563 7448570 7188579 6998580 7538580-2 7538580-3 7538580-4 7538580-5 7538581 7468582 7628583 7108584 7578590 7608591 7608592 7608593 7548593-1 7548595 7698596 7398598 7698600 6908603 7548604 7488605 7158606 7498608 6808611 7118612 7598613 7358615 6948616 6838617 6838618 6818620 6908621 6888622 7198624 7618625 6878626 6888627 7428628 7628629 6858629-1 6858629-2 6858629-3 6858629-4 6858629-5 6858629-6 6858629-7 6858629-8 6858630 7158631 7108632 710
Art. �8633 7008634 7368635 7588640 7708641 7608642 6958643 6908644 7428646 6848652 6888655 7468656 7168657 7278660 6958661 7528662 6908664 6918665 6958667 7378668 7308669 7198670 7028671 7208672 7208673 7218674 7298675 7438676 7718677 7388678 7298679 7018680 7208681 7448682 7128683 7058684 7138686 7518687 7508688 7558689 6978690 7198691 7158693 7508695 7408697 7218698 7288699 7288700 7018701 7158702 7498703 7128704 6948705 7168706 7568707 7078708 7038709 7058710 7208713 7118714 7458715 7018716 7078717 7568718 751
Art. �8719 7398720 7518721 7258722 7278723 7318724 7218725 7228726 7368727 7388728 7388729 7368731 6968732 6888733 7048734 7048735 7058736 7068737 7038738 7038739 7048740 7228741 7228742 7238743 7238744 7238745 7258746 7248747 7248748 7248749 7168750 7308751 7258752 7178753 7318754 7518755 6848756 6848757 6848758 6848759 7328761 7378762 7408763 7138764 6928765 7388766 7168767 7088768 7088769 7258770 7078771 7318774 7138774-1 7138776 7068782 7328789 7148799 6808801 7568802 7368803 7408805 7178810 6848811 6848812 684
2014
www.bgstechnic.com
Distribution:
