ProfessionalTools and

equiPmenT

B E Y O N D P O W E R

LUBRICATION EQUIPMENTBATTERY CHARGERS

EXTENSIONSWORK LAMPS

TOOLSWORK SUPPLIES

2

is an exclusive collection of premium quality tools and equipment, manufactured by suppliers chosen among the best in the world. Its name – originating from classic German – means strength and might, and reflects the durability of its products.

represents, beyond power, an array of solutions carefully selected to answer the ever-growing needs of the automotive, heavy-duty, industrial and agricultural industries.

TABLE OF CONTENTS

Nitrile Gloves 3

First Aid Kits 3

Lubrication and Fluid Transfer 4-12 Lubrication Pumps 4 Fluid Transfer Pumps 5 Reference Chart for Pumps 6 Meters and Accessories 8 Used Oil Drain 8 Grease Guns 9 Bearing Packer 9 Valves and Hoses 10 Lubrication Couplers and Adapters 11 Oil Cans 12 Trolleys and Dollies 12

Hoses and Reels 13-17 Air Hoses 13 Pneumatic Couplers 14 Air Hose Reels 16 Welding Hose Reel 16 Garden Hoses and Accessories 17

Battery Chargers 18-21 Smart Chargers 18 Booster Packs 19 Portable Booster/Power Source 20 Inverter 20 Useful Information 20 Booster Cables and Clamps 21

Lighting 22-25 Work Lamps 22 Flashlights 23 Specialized Lighting 25

Extension Cords 26-27 Cords 26 Reels 27 Useful Information 27

Bench Grinders 28

Sandblasters 28

Vises and Anvils 29

Index – Part Numbers 30-31

3

GLOVES (Nitrile)443 / MAI

FIRST AID Kits443 / MAI

902005Vehicle and Travel- This very compact kit that slides easily in a back pack or a glove

compartment. - Perfect for treating minor injuries on the go!- 56 items: antiseptic wipes, alcohol swabs, hand sanitizers, iodine,

adhesive and fabric bandages, gauze, tape, scissors, tweezers, gloves, cold pack and gel pack.

902007Home and Business- This compact kit is ideal for treating injuries at home, at work, even on

family trips!- 78 items: antiseptic wipes, alcohol swabs, iodine, adhesive and fabric

bandages, sterile pads, specialized pads, gauze, cold pack, tape, scissors, gloves and emergency first aid guide.

902010Deluxe- This convenient and portable kit is ideal for treating a wide range of

minor injuries.- 169 items: antiseptic wipes, alcohol swabs, hand sanitizers, iodine,

cotton-tipped applicators, adhesive and fabric bandages, sterile pads, specialized pads, gauze, finger splints, elastic bandage roll and butterfly closures, cold pack, tape, scissors, tweezers, safety pins, tongue depressors, gloves and emergency first aid guide.

PART NO. THICKNESS SIZE QTY/BOX901003

5 milM 100

901004 L 100901005 XL 100901012

6 mil

S 100901013 M 100901014 L 100901015 XL 100901016 XXL 90901023

8 mil

M 50901024 L 50901025 XL 50901026 XXL 50

Sensitive Touch- High sensitivity touch- High dexterity level - Comfort flex-fit reduces muscle fatigue- Textured grip for picking up small parts

Ultra-Stretch- Excellent sensitivity- High elastic stretch breaking point- Durable and comfortable- Textured grip for picking up small parts

Durable Power- Good sensitivity- Rolled cuff for easy on/off- Durable and comfortable- Textured grip with beaded cuff

5 mil

6 mil

8 mil

902005

902007

902010

4

Lube PUMPS AnD ACCESSORIES449 / MTL

Lubricant Pumps

PART NO. DESCRIPTION FOR CONTAINER DELIVERS600450 Grease Filler Pump 15-55gal. (50-205L) 1oz (1g) / 28 strokes600460 Air-Operated 50:1 Grease Pump 25-50lb / 5gal. / 20L 2.42lb (1.1kg) / min.600540 Lever-Action Bucket Oil Pump 25-50lb / 5gal. / 20L 2.14oz (60ml) / stroke600541 Lever-Action Barrel Pump 15-55gal. (50-205L) 10oz (300ml) / stroke600545 Rotary Drum Pump 15-55gal. (50-205L) 1.3gal. (5L) / 20 stokes600546 Plastic Rotary Pump 15-55gal. (50-205L) 1.3gal. (5L) / 20 stokes

600450 600540600460 600541 600545 600546

600465Trolley Mounted Air Operated Grease Pump- Fits 120 lb grease pails- Max. 7500 PSI- Delivers up to 2.40 lbs/min.- For use with NLGI 1 and 2 greases- Includes: Steel trolley, air operated 50:1 grease pump

system & 1/4” filter-regulator and lubricator miniature combo with gauge.

600580 600581 600582

Air-Operated Oil Ratio Pumps- Designed to work in tough conditions, ideal for use in industries, workshops, farms, construction or as

part of a mobile oil system- All metal construction, fully CNC machined with hardened wear resistant moving parts- Reciprocating piston operated 2-1/2” (63 mm) diameter air motor- Comes with non-return valve threaded 1” (F) for use on the bottom of the suction tube- Transfer pump used to quickly transfer oils from large drums to smaller containers over short distances (up to 5m).

PART NO. ACTION MAX. DISCHARGE VISCOSITY AIR CONSUMPTION600580 Double 40 LPM (10.58GPM) Low-Med - up to SAE80 270LPM (71.5GPM)600581 Simple 14 LPM (3.7GPM) Med-High - up to SAE130 230LPM (61GPM)600582 Double 18 LPM (4.76GPM) High - up to SAE240 250LPM (66GPM)

5

Lube PUMPS AnD ACCESSORIES449 / MTL

Transfer Pumps

PART NO. DESCRIPTION FOR CONTAINER DELIVERS600543 316 Stainless Steel Vertical Lift Pump 55gal. (205L) 750ml (25 oz) / stroke600548 Manual Rotary Plastic Pump 15-55gal. (50-205L) 1.3gal. (5L) / 20 turns600549 304 Stainless Steel Rotary Drum Pump 15-55gal. (50-205L) 1gal. (4L) / 20 turns601003 Polypropylene Chemical Pump 15-55gal. (50-205L) 14oz (400ml) / stroke601004 Nylon Chemical Pump 55gal. (205L) 14oz (400ml) / stroke601030 Plastic Pump with Dual Action Lever 15-55gal. (50-205L) 1pt (500ml) / stroke601060 Double Diaphragm Fuel Pump 15-55gal. (50-205L) 1gal. (800ml) / 5 strokes601061 Rotary Booster Fuel Tranfer Pump 15-55gal. (50-205L) 55gal. (205L) / 3 min.601062 Industrial Rotary Pump 15-55gal. (50-205L) 10gal. (38L) / min.601063 Quart / Litre Stroke Pump 15-55gal. (50-205L) 1qt (1L) / turn601625 Electric Drum Pump (Rechargeable) 55gal (205L), 275-330gal (1000-1250L) 7.4gal. (28L) / min.

601060 601061 601062 601063 601625

601030600543 601004600548 601003600549

6

PUMPS AnD ACCESSORIES - Reference Chart

LEGEND

• Substance suitable for prolonged or repeated contact with the unit, under the specified conditions.• Do not use - Substance will damage the unit components.• Component material in contact with the chemical/substance.

NOTEThese charts are for general reference only, and data has been aggregated from multiple sources. Additionally, many factors affect the chemical resistance of a given product including the concentration/purity of the chemical, working temperature and condition of the product, etc. It is the user’s responsibility to test a chemical to ensure compatibility under the prevailing circumstances. All information and technical data are given as a guide only. Although every effort has been made to ensure that the information is correct, no warranty is given as to its thoroughness.

600450 600460 600465 600540 600541 600543 600545 600546 600548 600549 600580 600581

Recommended use forOil-based fluids • • • • • •

Heating oils • • • • • • • • • • •Hydraulic oils • • • • • • • • • • • •

Gear and lube oils • • • • • • • • • • • •Motor oils • • • • • • • • • • • •

Transmission differential oils • • • • • • • •

Lubricating oil up to SAE 30 • • • • • • • • • • • •Lubricants • • • • • • •

Petroleum-based products • • • • • • • • • • •Grease NLGI

no. 2 • • • • • • • • • • • •Heavy oil • • • • • • • • • • •

Mineral oil • • • • •Glycerine • • • • •Gasoline • • • • • • • • • • • •

Diesel • • • • • • • • • •Biodiesel • • • • • •Kerosene • • • • • • • • • •

Fuel with ethanol contents above 10% • • • • • • • • • •

Water-based fluids • • • • • • • • • • • •Detergent • • • • • • • • • • • •

Soap • • • • • • • • • • • •Antifreeze • • • • • • • • • • • •

Windshield washer • • • • • • • • • •Chemicals • • • • • • • • • • • •

Herbicides / Pesticides • • • • • • • • • •DEF / Urea / Adblue • • • • • • • • • • • •

Corrosive media • • • • • • •Alkalis • • • • • • •

Mild Acids • • • • • • • • • • • •Strong Acids • • • • • • • •

Acetone • • • • • • • • • •Benzene • • • • • • •

Solvent • • • • • • • • • •Thinner • • • • • • •

Turpentine • • • • • • •Lacquer • • • • • • • • • •

Wetted componentsAcetal (POM)

Aluminum • • • • • • •Brass • • • • • • •

Cast iron •EPDM

GraphiteNBR • • • • • • • •

Nylon • •Paper

PolyethylenePolypropylene • •Polyurethane • • • •

PTFE • •PVC •

Ryton • •Stainless steel • •

Steel • • • • • • • •Turcite •

Viton • •Zinc • • •

7

LEGEND

• Substance suitable for prolonged or repeated contact with the unit, under the specified conditions.• Do not use - Substance will damage the unit components.• Component material in contact with the chemical/substance.

NOTEThese charts are for general reference only, and data has been aggregated from multiple sources. Additionally, many factors affect the chemical resistance of a given product including the concentration/purity of the chemical, working temperature and condition of the product, etc. It is the user’s responsibility to test a chemical to ensure compatibility under the prevailing circumstances. All information and technical data are given as a guide only. Although every effort has been made to ensure that the information is correct, no warranty is given as to its thoroughness.

PUMPS AnD ACCESSORIES - Reference Chart600582 600590 600592 600595 601003 601004 601030 601060 601061 601062 601063 601625

Recommended use forOil-based fluids • • • • • •

Heating oils • • • • • •Hydraulic oils • • • • • • • • • • •

Gear and lube oils • • • • • • • • •Motor oils • • • • • • • • • •

Transmission differential oils • • • • • • •

Lubricating oil up to SAE 30 • • • • • • • • • • •Lubricants • • • • •

Petroleum-based products • • • • • • • • • • •Grease NLGI

no. 2 • • • • • • • • • • • •Heavy oil • • • • • • • •

Mineral oil • • •Glycerine • • • • •Gasoline • • • • • • • • • • • •

Diesel • • • • • • • • • • • •Biodiesel • • • • • •Kerosene • • • • • • • • • • • •

Fuel with ethanol contents above 10% • • • • • • • • •

Water-based fluids • • • • • • • • • • • •Detergent • • • • • • • • • • • •

Soap • • • • • • • • • • •Antifreeze • • • • • • • • • • • •

Windshield washer • • • • • • • • • • • •Chemicals • • • • • • • • • •

Herbicides / Pesticides • • • • • • • • • • • •DEF / Urea / Adblue • • • • • • • • • • • •

Corrosive media • • • • • • • • • •Alkalis • • • • • • • •

Mild Acids • • • • • • • • • • • •Strong Acids • • • • • • • • • • •

Acetone • • • • • • • • • • •Benzene • • • • •

Solvent • • • • • • • •Thinner • • • • • • • • • •

Turpentine • • •Lacquer • • • • • • • • • • •

Wetted componentsAcetal (POM) • • • • • • •

Aluminum • • • • • •Brass •

Cast iron •EPDM •

Graphite •NBR • • • • • • •

Nylon • • •Paper •

Polyethylene • •Polypropylene • • • • •Polyurethane •

PTFE •PVC • •

RytonStainless steel • • • • •

Steel • • • • • • • •Turcite •

Viton • • • • • •Zinc •

8

Lube PUMPS AnD ACCESSORIES449 / MTL

Grease Meter- High accuracy digital grease meter to measure exact amount of grease dispensed- Oval gear mechanism to offer high precision & low pressure losses- Features a non-volatile memory for storing the dispensing data even in the event of a complete power break

for long periods- Electronic card with microprocessor permits control of the display and calibration of the meter.

PART NO. DESCRIPTION PSI (BAR) THREADS DELIVERS (per min.)600530 Digital Meter (Oval Gear Mech.) 8000 (552 BAR) 1/8 NPT (F) 0.1 - 2.5kg (0.2 - 0.55lbs)

Oil Control Guns

PART NO. DESCRIPTION THREADS MEASURE-MENT FLOW RATE

600590 Mechanical Oil Control Gun1/2 NPT

(F) L870 (60 BAR)

1 - 30 LPM (0.3 - 8 GPM)

600592 Digital Oil Control Gun 1/2 NPT (F)L, Qt,

Pt, Gal.870 (60 BAR)

1 - 30 LPM (0.3 - 8 GPM)

600595 Oil Control Gun - Digital Pre-Set1/2 NPT

(F)L, Qt,

Pt, Gal.870 (60 BAR)

1 - 30 LPM (0.3 - 8 GPM)

600590 600592 600595

PART NO. CAP. BOWL SIZE (in)BOWL HEIGHT

(in)

600620 18 Gal. (68 L)14

(2.5 Gal.) 45 to 72”

Pressurized Used Fluid Receiver- Accepts standard shop air up to 150 psi- Pre-assembled castors with

reinforced supports- Includes combination

evacuation hose / sight gauge, fixed air inlet regulator, pressure relief valve and user manual.

600585Telescopic Suction Tube- For use with air operated stub pumps- Converts a stub pump for use with 205L (55 gal.) drums- One end fitted with a strainer, the other is threaded (1” NPTM).

Drum Faucets- With bucket hanger and padlock hole.

601322 : Fits 3/4” drum holes601323 : Fits 2” drum holes (additional port for sight glass / oil level indicator).

436 / MAE

9

Grease Guns

PART NO. DESCRIPTION PSI (BAR) CARTRIDGE CAP. BULK CAP. THREADSDELIVERS

(per stroke)DELIVERS(per min.)

600020 Heavy-Duty Lever Grease Gun 10000 (690 BAR) 14 oz (400g) 500 cm3 1/8 NPT 1g ( 1oz / 28 ) --600022 Professional Lever Grease Gun 10000 (690 BAR) 14 oz (400g) 500 cm3 1/8 NPT 1g ( 1oz / 28 ) --600030 Pistol-Grip Grease Gun 5000 (345 BAR) 14 oz (400g) 500 cm3 1/8 NPT 0.5g ( 0.7oz / 40 ) --600032 Professional Trigger Grease Gun 6000 (413 BAR) 14 oz (400g) 16oz (500ml) 1/8 NPT 20g ( 0.8oz / 40 ) --600033 Ultimate-Duty Pistol-Grip Grease Gun 7000 (483 BAR) 14 oz (400g) 500 cm3 1/8 NPT 0.9g ( 1.3oz / 40 ) --600050 Air-Operated Continuous Flow Grease Gun 4800 (330 BAR) 14 oz (400g) 500 cm3 1/4 NPT -- 400g (14oz)600028 Compact Lever Grease Gun 6000 (413 BAR) 3 oz (85g) -- -- -- --600034 Mini Pistol-Grip Grease Gun, Deluxe 3500 (240 BAR) 3 oz (85g) -- 1/8 NPT 0.4g ( 0.6oz / 40 ) --

600020 600022 600030 600033

600032

600034600050 600028

Grease GUnS449 / MTL

Suction Oil Gun- A rugged transfer gun designed for use with gear oils to get them both into

and out of gear boxes, transfer cases and differentials- Deluxe lip seal provides maximum suction- Steel barrel in premium powder coated finish- Fully serviceable- Needs no priming- Suitable for use with non corrosive liquids- Capacity: 500 ml (16 oz).

PART NO. CAP.600040 500 ml (16 oz)

Quick Action Bearing Packer- Useful for greasing bearings in cars, boats, tractors, RV’s, etc- Rugged steel construction- Rapid-action bench-type bearing packer for use with grease guns- Non-threaded top cone for fast placement of bearings (the design incorporates grease nipple on the outer shaft to easily adapt to the grease gun coupler- For bearings with a minimum inner diameter of 1/2” (12mm), maximum external diameter of 6” (150mm), and height of 3/8” to 2” (10 to 50mm).

PART NO. INTERNAL BEARING DIAM. (in) EXTERNAL BEARING DIAM. (in) HEIGHT (in)600152 1/2 (12mm) 6 (150mm) 3/8 - 2 (10-50mm)

10

Grease Control VALVES449 / MTL

Lube HOSES AnD DISPEnSERS449 / MTL

Flexible Grease Gun Hoses

600100 / 600101- Superior construction – Inner tubing is polyamide with polyurethane sheathing, reinforced diagonally in highly tear resistant polyester- ID 0.16” (4.1 mm), OD 0.425” (10.8 mm)- Large inner diameter makes them ideal for use in cold weather- Heavy-duty zinc-plated hydraulically crimped end connections, rolled threads and heavy-duty spring guard.

600102 / 600103- Thermoplastic construction, highly flexible, minimum bending radius of 1.57’’ (40mm)- ID 0.14’’ (3.6mm), OD 0.33’’ (8.5mm)- Zinc-plated steel end connections with hydraulic crimping.

600095 / 600096- 7/16 po UNEF (M) x 1/8 po NPT (M) - Pression de fonctionnement de 10 000 lb/po2, pression d’explosion de 28 000 lb/po2.

PART NO. DESCRIPTION PSI (BAR) THREADS LENGTH (in)600095 Heavy-Duty Grease Gun Hose 5800 (400 BAR) 1/8 NPT (M) 24 (610mm)600096 Heavy-Duty Grease Gun Hose 5800 (400 BAR) 1/8 NPT (M) 36 (914mm)600100 Hose for Manual Gun 3500 (240 BAR) 1/8 NPT (M) 12 (300mm)600101 Hose for Manual Gun 3500 (240 BAR) 1/8 NPT (M) 18 (150mm)600102 Hose for Hand and Air-Operated Gun 5800 (400 BAR) 1/8 NPT (M) 12 (300mm)600103 Hose for Hand and Air-Operated Gun 5800 (400 BAR) 1/8 NPT (M) 18 (150mm)

600100600101

600102600103

600512Premium Grease Control Valve- Premium quality valve, for use with air-operated grease pumps- Provides continuous grease flow with trigger fully pressed- Steel construction, provides durability and longevity- Ergonomically designed pistol handle- Comes complete with 6’’ steel extension and heavy-duty coupler.

600513Heavy-Duty Grease Control Valve- Heavy-duty valve with built-in pressure boost mechanism (from 6000 to 10,000 PSI) to unblock frozen fittings- Provides continuous grease flow with trigger fully pressed- Heavy-duty steel construction and ergonomically designed pistol handle- Comes complete with 6’’ steel extension and coupler.

600520Grease Control Valves (Z-Swivel Couplers)- Installed between the delivery hose & grease control valve, this coupler permits easy handling of control valves and prevents damage to hose caused by twisting- Heavy-duty steel construction with ball bearings for smooth operation and free unrestricted movement- Swiveling joints are hardened for durability & wear resistance.

PART NO. DESCRIPTION PSI (BAR) INLET OUTLET600512 Grease Control Valve - Professional 7500 (517 BAR) 1/4 NPT (F) 1/8 NPT (F)600513 Grease Control Valve - Booster 10000 (690 BAR) 1/4 NPT (F) 1/8 NPT (F)600520 Z-Swivel Coupler -- 1/4 NPT (F) 1/4 NPT (M)600521 Z-Swivel Coupler -- 1/4 NPT (F) 1/8 NPT (M)

600513600512

600520600521

600095600096

11

Hydraulic Grease Couplers- Hardened coupler body withstands high pressure without deformation- Fully hardened spring steel jaws- Hexagonal nut for easy tightening.

PART NO. PSI (BAR) THREADS JAWS BALL CHECK600105 6000 (413 BAR) 1/8 NPT (F) 4 √600106 10000 (690 BAR) 1/8 NPT (F) 4 √600107 7500 (517 BAR) 1/8 NPT (F) 3 √

Grease Gun Couplers

600108- For limited access fittings (such as on Chrysler models)- Fits all standard grease guns.

600109- Fully-hardened jaws and body, zinc-plated finish, spring-loaded ball check valve.

PART NO. DESCRIPTION PSI (BAR) THREADS JAWS BALL CHECK600108 90° Coupler (for hand-op. guns) 1000 (69 BAR) 1/8 NPT (F) N/A N/A600109 360° Coupler (for hand-op. guns) 7500 (517 BAR) 1/8 NPT (F) 3 √

Quick Connect Lube Adapters

PART NO. DESCRIPTION PSI (BAR) TIP DIAM. (in) QUICK COUPLER600115 Grease Injector Needle, 1,5po (38mm) 6000 (413 BAR) 0.059 (1.17mm)600116 Grease Injector Needle, 6po (150mm) 6000 (413 BAR) 0.059 (1.17mm)600131 Professional 90° Lube Adapter 1000 (69 BAR) 0.19 (4.9mm) √600132 Professional Recessed Lube Adapter 1000 (69 BAR) 0.25 (6.35mm) √600133 Professional Narrow Needle Nose Adapter 1000 (69 BAR) 0.059 (1.5mm) √600134 Needle Nose Adapter 1000 (69 BAR) 0.046 (1.17mm) √600135 Grease Injector Needle (hand-op. guns) 1000 (69 BAR) -- √600136 Regular Coupler to 90° Coupler 1000 (69 BAR) -- √600137 Right Angle Coupler 6000 (413 BAR) -- √600140 Quick Lock Grease Coupler 8000 (551 BAR) 0.125 (3.17mm) √

Lube COUPLERS AnD ADAPTERS449 / MTL 600105600106

600108

600131 600137600135 600134 600140600132 600133 600136

600109

600107

600115 600116

12

600801600810600811600812

600800

Oil Cans- All steel construction, with seamless body drawn from a tin-coated sheet with premium powder coated finish- Metal pump has 2 ball valves for large volume delivery per stroke- Suction valve at the bottom of pump is without spring, which prevents malfunctioning because of sticking valve due to resinous oil- Complete with flexible spout.

PART NO. DESCRIPTION CAP.600800 Pistol 6 oz (180ml)600801 Lever 6.8 oz (200ml)600810 Lever 10 oz (300ml)600811 Lever 1 pint (500ml)600812 Lever 1 quart (1000ml)

Drum Dollies- Heavy-duty drum dollies with welded 3 mm (11 gauge) steel sheet construction- Strong steel braces and adjustable clamping bolt design on models 601300 through 601302 (fixed diameter and wide steel cross braces for model 601303)- Removable phenolic casters 2-13/32” (61 mm) in diameter (welded cast iron casters on model 601303)- Fully powder coated finish.

PART NO. CASTERS CAP. CONTAINER SIZE DIAM.RANGE (in)601300 4 90kg (200 lb) 25-50lb / 20kg / 5 Gal. 10-1/4 - 11-9/32 (260-287mm)601301 4 90kg (200 lb) 120lb / 50kg / 16 Gal. 13-1/2 - 14-1/4 (343-362mm)601302 5 114kg (250 lb) 30 Gal. 18 - 19 (457-482mm)601303 4 545kg (1200 lb) 55 Gal. / 205L 23 (584mm)

601305Drum Cradle- Tilting drum cradle tips, rotates, moves and stores 400 lbs / 180 kg / 205 litre / 55 gallon drums- Equipped with self-storing lever bar- Large 2-1/2” (63 mm) non-sparking wheels make it suitable for use in

flammable environments- Maximum load 600 lbs / 273 kg- Fully powder coated finish- Unit comes flat packed in semi-knocked down condition for ease of transport.

601306Adjustable Drum Trolley- Drum trolley with adjustable locking

clamp for use with 25-50lbs / 5 gallon / 20 litre drums, to larger drums up to

120 lbs / 16gallons / 60 litres- Ideal for transporting oil / grease

barrels, as well as installing air-operated pump assemblies

- Steel construction with premium powder coated finish

- Heavy-duty rubberized wheels (5” x 1-3/8”) for use in rigorous

workshop environment- Unit comes flat packed in semi-knocked down condition for ease of transport.

601300 601301 601302 601303

Oil CAnS449 / MTL

Drum DOLLIES449 / MTL

Drum TROLLEyS449 / MTL

13

Air HOSES436 / MAE

EDPM Rubber Air Hose- Suitable for industrial, construction, agricultural and automotive use- Working temperature : -30 to 88°C (-22 to 190°F)- ‘’C’’ RMA class: medium oil and chemical resistance- Heavy duty PVC bend restrictors, 100% brass fittings and abrasion resistant outer cover to reduce wear and tear and extend hose life- Retains excellent flexibility in sub freezing temperatures; easy coiling for storage.

PART NO. HOSE SIZE (ft) HOSE ID & OD FITTING SIZE WORK TEMP. (°F)801013 25 (7.6m) 3/8 x 5/8 (10 x 16mm) 1/4 NPT -22 to 190 (-30 to 88°C)801015 50 (15m) 3/8 x 5/8 (10 x 16mm) 1/4 NPT -22 to 190 (-30 to 88°C)801017 100 (30m) 3/8 x 5/8 (10 x 16mm) 1/4 NPT -22 to 190 (-30 to 88°C)801023 25 (7.6m) 1/2 x 3/4 (12 x 20mm) 1/2 NPT -22 to 190 (-30 to 88°C)801025 50 (15m) 1/2 x 3/4 (12 x 20mm) 1/2 NPT -22 to 190 (-30 to 88°C)801053 25 (7.6m) 1/4 x 1/2 (6 x 12mm) 1/4 NPT -22 to 190 (-30 to 88°C)801055 50 (15m) 1/4 x 1/2 (6 x 12mm) 1/4 NPT -22 to 190 (-30 to 88°C)801063 25 (7.6m) 3/8 x 5/8 (10 x 16mm) 1/4 NPT -22 to 190 (-30 to 88°C)801065 50 (15m) 3/8 x 5/8 (10 x 16mm) 1/4 NPT -22 to 190 (-30 to 88°C)801067 100 (30m) 3/8 x 5/8 (10 x 16mm) 1/4 NPT -22 to 190 (-30 to 88°C)801073 25 (7.6m) 1/2 x 3/4 (12 x 20mm) 1/2 NPT -22 to 190 (-30 to 88°C)801075 50 (15m) 1/2 x 3/4 (12 x 20mm) 1/2 NPT -22 to 190 (-30 to 88°C)801077 100 (30m) 1/2 x 3/4 (12 x 20mm) 1/2 NPT -22 to 190 (-30 to 88°C)

Hybrid Air Hose- Suitable for body shop, refrigeration, construction and outdoor use- Working/Burst Pressure : 300/900 PSI (20/62 bar)- ‘’B’’ RMA class: medium to high oil and chemical resistance- Heavy duty PVC bend restrictors, 100% brass fittings and excellent abrasion resistant outer cover to reduce wear and tear and extend hose life- UV, Ozone, crack, oil and chemical resistant- Superior flexibility in sub freezing temperatures, lightweight, easy coiling for storage.

PART NO. HOSE SIZE (ft) HOSE ID & OD FITTING SIZE WORK TEMP. (°F)801113 25 (7.6m) 3/8 x 5/8 (10 x 16mm) 1/4 NPT -40 to 150 (-40 to 65°C)801115 50 (15m) 3/8 x 5/8 (10 x 16mm) 1/4 NPT -40 to 150 (-40 to 65°C)801123 25 (7.6m) 1/2 x 3/4 (12 x 20mm) 1/2 NPT -40 to 150 (-40 to 65°C)801125 50 (15m) 1/2 x 3/4 (12 x 20mm) 1/2 NPT -40 to 150 (-40 to 65°C)

Nitrile Rubber Air Hose- Suitable for automotive, in-plant, glycol and petroleum based oils use- Working/Burst Pressure : 250/1000 PSI (17/70 bar)- ‘’A’’ RMA class: high oil and chemical resistance- Heavy duty PVC bend restrictors, 100% brass fittings and excellent abrasion resistant outer cover to reduce wear and tear and extend hose life- UV, Ozone, crack, oil and chemical resistant- Retains good flexibility in sub freezing temperatures; easy coiling for storage.

PART NO. HOSE SIZE (ft) HOSE ID & OD FITTING SIZE WORK TEMP. (°F)801213 25 (7.6m) 3/8 x 5/8 (10 x 16mm) 1/4 NPT -22 to 176 (-30 to 80°C)801215 50 (15m) 3/8 x 5/8 (10 x 16mm) 1/4 NPT -22 to 176 (-30 to 80°C)

14

A-STYLE

PART NO. DESCRIPTION DIAM. FLOW MATERIAL802011 Quick Coupler 1/4 FNPT Regular Brass802021 Quick Coupler 1/4 FNPT Regular Steel/Zinc802022 Quick Coupler 1/4 MNPT Regular Steel/Zinc802031 Plug 1/4 MNPT Regular Steel/Zinc802032 Plug 1/4 FNPT Regular Steel/Zinc

H-STYLE

PART NO. DESCRIPTION DIAM. FLOW MATERIAL802071 Quick Coupler 1/4 FNPT Regular Steel/Zinc802073 Quick Coupler 3/8 FNPT Regular Steel/Zinc802074 Quick Coupler 3/8 MNPT Regular Steel/Zinc802081 Plug 1/4 MNPT Regular Steel/Zinc802082 Plug 1/4 FNPT Regular Steel/Zinc802083 Plug 3/8 MNPT Regular Steel/Zinc802084 Plug 3/8 FNPT Regular Steel/Zinc

L-STYLE

PART NO. DESCRIPTION DIAM. FLOW MATERIAL802091 Quick Coupler 1/4 FNPT Regular Steel/Zinc802101 Plug 1/4 MNPT Regular Steel/Zinc802102 Plug 1/4 FNPT Regular Steel/Zinc

M/I-STYLE

PART NO. DESCRIPTION DIAM. FLOW MATERIAL802111 Quick Coupler 1/4 FNPT Regular Brass802112 Quick Coupler 1/4 MNPT Regular Brass802113 Quick Coupler 3/8 FNPT Regular Brass802121 Plug 1/4 MNPT Regular Steel/Zinc802122 Plug 1/4 FNPT Regular Steel/Zinc802123 Plug 3/8 MNPT Regular Steel/Zinc

802091

802011

802111802113

802021

802112

802102

802031

802122

802101

802022

802071802073

802074 802082802084

802081802083

802121802123

802032

Quick COUPLERS AnD PLUGS449 / MTL

15

P-STYLE

PART NO. DESCRIPTION DIAM. FLOW MATERIAL802131 Quick Coupler 1/4 FNPT Regular Steel/Zinc802133 Quick Coupler 3/8 FNPT Regular Steel/Zinc802134 Quick Coupler 3/8 MNPT Regular Steel/Zinc802141 Plug 1/4 MNPT Regular Steel/Zinc802142 Plug 1/4 FNPT Regular Steel/Zinc802143 Plug 3/8 MNPT Regular Steel/Zinc802144 Plug 3/8 FNPT Regular Steel/Zinc

T-STYLE

PART NO. DESCRIPTION DIAM. FLOW MATERIAL802151 Quick Coupler 1/4 FNPT Regular Steel/Zinc802161 Plug 1/4 MNPT Regular Steel/Zinc802162 Plug 1/4 FNPT Regular Steel/Zinc

V-STYLE

PART NO. DESCRIPTION DIAM. FLOW MATERIAL802171 Quick Coupler 1/4 FNPT High Brass802172 Quick Coupler 1/4 MNPT High Brass802191 Plug 1/4 MNPT High Brass802192 Plug 1/4 FNPT High Brass

PART NO. DESCRIPTION DIAM. FLOW MATERIAL802201 Hose End Fitting, 3/8» I.D. (S-602) 1/4 MNPT -- Brass802411 Coupler and Plug Kit 1/4 NPT -- Brass & Steel/Zinc

802131802133

802171

802151

802134

802172

802142802144

802192

802411

802141802143

802191

802201

802161 802162

Quick COUPLERS AnD PLUGS449 / MTL

16

AIR HOSES and Reels436 / MAE

Standard Retractable Metal Air Hose Reel- Oil-resistant 3/8” x 50’ nitrile butadiene rubber hose- 8-position locking mechanism- Adjustable 5-position roller guide arm- Mounts to floor, wall or ceiling- Standard (800104 and 800105) or heavy-duty service (900114 and 800115).

Compact Retractable Metal Air Hose Reel- Flexible 3/8” x 50’ hybrid hose (3’ lead hose with brass swivel joint)- Multi-position locking ratchet gear mechanism- Spring powered automatic rewind- 4-way non-snap rollers- Mounts to floor, wall or ceiling- Available with single arm (800094) or dual arm (800084).

Retractable Hose Reel with Premium Hybrid Polyurethane Air Hose- Sturdy polypropylene reel, for impact and ozone resistance, UV protection and durability- Self-laying hose system - 3/8 x 50 zero-memory hybrid hose that remains flexible even in sub-zero conditions, up to -40°F (-40°C)- Bend restrictor- Optional position lock and adjustable hose stopper- Metal handle and 180° swivel mounting bracket- Model 800080.

Air Hose Specifications

PART NO. HOSE (in x ft) CAP. AIR INLET COUPLER800104 3/8 x 50 300 PSI 3/8 NPT (F) 3/8 NPT (M)800105 1/2 x 50 300 PSI 1/2 NPT (F) 1/2 NPT (M)800114 3/8 x 50 300 PSI 3/8 NPT (F) 1/4 NPT (M)800115 1/2 x 50 300 PSI 1/2 NPT (F) 1/2 NPT (M)800084 3/8 x 50 250 PSI800094 3/8 x 50 250 PSI800080 3/8 x 50 300 PSI 1/4 NPT (M) 1/4 NPT (M)

800120Twin Welding Hose on Retractable Metal Reel- Twin 1/4” x 50ft oxygen and acetylene hose with dual o-ring seals- 9/16 x 18 UNF (2B) (F), 200 PSI capacity- Rugged, industrial-grade steel reel with 4-way non-snap rollers and flexible hose stop- Multiple mounting positions.

800125Oil Hose on Metal Reel- Flexible metallic meshed hose (1/2”” x 50’) with machined brass fittings- 2000 PSI work pressure (135 bar)- Spring-powered auto-rewind and multi-position ratchet gear allows hose

to lock at desired length- 4-way non-snap rollers to reduce hose wear- Mounts to floor, wall, ceiling, bench or tank.

800104800105

800084 800094

800080

800114800115

17

810000Hybrid PVC Garden Hose on Reel- Hose size: 1/2” X 65’ outlet and 6’ inlet - Fitting size: 3/4” GHT(F X M)- Extreme all weather flexibility even in sub-zero conditions: -30°C (-22°F) to +70°C (158°F)- Lightweight, lay flat, no memory material, kink resistant under pressure- Excellent abrasion resistant outer cover- UV, Ozone, cracking, chemicals and oil resistant- 100 PSI maximum working pressure, 3:1 safety factor- Bend restrictor for reducing wear and tear, and extending hose life- 100% brass fittings- Sturdy composite reel.

810301Front Trigger Adjustable Spray Nozzle - Heavy-duty metal construction - Brass tip with adjustable spray pattern- Crush-resistant, metal handle with soft grip

over-mold.

8103029-Pattern Front Trigger Nozzle - Heavy-duty metal construction - 9-pattern spray head- Crush-resistant, metal handle with soft grip

over-mold.

810311Heavy-Duty Fireman Nozzle- Lightweight, composite construction- Pull-back lever- Adjustable spray pattern.

Garden Hoses- Tough and durable abrasion-resistant outer cover, resists UV, Ozone, cracking, chemicals and oil- Kink resistant under pressure, remain flexible even in sub-zero conditions- Bend restrictor for reducing wear and tear, and extending hose life- Easy coiling for storage (our hybrid hoses are made of a light, no memory material that stores flat)- 100% brass fittings.

PART NO. DESCRIPTION BOYAU PSI FLEXIBILITÉ810005 Boyau de caoutchouc, calibre contracteur 3/4 x 50 135 40°C (-40°F) - 82°C (180°F )810010 Boyau de caoutchouc, calibre contracteur 3/4 x 100 135 40°C (-40°F) - 82°C (180°F )810105 Boyau de polymère hybride 3/4 x 50 150 40°C (-40°F) - 82°C (180°F )810110 Boyau de polymère hybride 3/4 x 100 150 40°C (-40°F) - 82°C (180°F )

810005810010

810105810110

WATER HOSES and accessories443 / MAI

18

Intelligent BATTERy CHARGERS443 / MAI

71013512V/25A Smart Battery Charger with 75A Jumpstarter- Designed to work on Gel

and AGM batteries.- This charger comes

with 2 run connect charging leads for extra versatility - standard clamps and ring terminals.

- Charge status indicator- Automatic of charging, Switches to Maintenance mode- Automatic shut-off, switches to Maintenance mode- Reverse polarity protection- Aborted charges - If charging can’t be completed normally, charging will be aborted - Battery diagnostics - Continuously monitors battery condition and may report certain charging failures as fault codes - Integrated cooling fan- Overheat protection.

710138Automatic Battery Charger- Designed to work

on Gel and AGM batteries.

- Charge status indicator

- Automatic shut off- Completion of charging, - switches to Maintenance mode- Reverse polarity protection- Battery reconditioning mode - Reverse the effects of

sulphating and restore a batteries ability to accept a charge- Aborted charges - If charging can’t be completed normally,

charging will be aborted - Battery diagnostics - Continuously monitors battery condition

and may report certain charging failures as fault codes - Integrated cooling fan.

7101454-25 A Intelligent Battery Charger with 75 A Engine Start- Suitable for all 12 V Lead-Acid batteries, including deep cycle, AGM and Gel- Automatic selection of the ideal charge rate (4-25 A) to protect your

battery against damage and reduced life caused by overheating- Fully automatic, multi-stage charging: Built-in intelligent

microprocessor monitors battery status and regulates charge cycle providing a faster, more thorough battery charge

- Specific charge rate selection mode: Select 25 A (express) or 12 A (fast) to quickly charge large batteries, or select 4 A (slow) for

regular charging- 75 A engine start feature to boost your vehicle’s dead battery- Maintenance Mode : Automatic switch from full charge to

maintenance mode to maintain batteries during prolonged periods of storage without overcharging or damaging the battery

- Battery reconditioning by reversing sulphate build-up on battery plates restoring lost battery capacity

- Reverse polarity, short-circuits and overheating protection- Continuous monitoring of battery voltage to detect potential battery

defects- Digital LED display shows voltage, current, charging status and

diagnostic fault codes- High-efficiency power conversion to save energy and compensate

for low AC input voltage when using an extension cord- 6’ power cord and output cables for up to 12’ of reach.

7101482-12 A Intelligent Battery Charger- Suitable for all 12 V Lead-Acid batteries, including deep cycle,

AGM and Gel- Automatic selection of the ideal charge rate (2-12 A) to protect

your battery against damage and reduced life caused by overheating

- Fully automatic, multi-stage charging: Built-in intelligent microprocessor monitors battery status and regulates charge cycle providing a faster, more thorough battery charge

- Specific charge rate selection mode: Select 12 A (fast) or 8 A (medium) for large batteries, or select 2 A (trickle) for small batteries

- Maintenance Mode : Automatic switch from full charge to maintenance mode to maintain batteries during prolonged periods of storage without overcharging or damaging the battery

- Battery reconditioning by reversing sulphate build-up on battery plates restoring lost battery capacity

- Reverse polarity, short-circuits and overheating protection- Continuous monitoring of battery voltage to detect potential

battery defects- Digital LED display shows voltage, current, charging status and

diagnostic fault codes- High-efficiency power conversion to save energy and

compensate for low AC input voltage when using an extension cord

- 6’ power cord and output cables for up to 12’ of reach.

PART NO. DESCRIPTION JUMPSTARTER RECOMMENDED FOR710135 2/12/25 A Smart Battery Charger 75 A Gel, AGM710138 2/8/12 A Automatic Battery Charger -- Gel, AGM710145 4/12/25 A Intelligent Battery Charger 75 A 12V Lead-Acid, incl. gel and AGM710148 2/8/12 A Intelligent Battery Charger -- 12V Lead-Acid, incl. gel and AGM

19

Chargers AnD MAInTAInERS443 / MAI

JUMPSTARTERS443 / MAI

710035800A Jumpstarter- 800 Amp cranking current- Jumpstart manual switch & indication- Super-bright emergency LED light- Ideal for cars, vans and SUV’s

PART NO. JUMPSTARTER BATTERY CABLES OUTLET710035 800 A Max. 22Ah Sealed Lead-Acid 4 AWG / 1m 12V DC

710036400A Jumpstarter- Easy-to-use and reliable jumpstarter, perfect for cars, SUVs, trucks and vans- Very light weight- Internal battery warming device for sub-zero temperatures- Maximum 16,800 mAh battery- 12V DC outlet (with overload protection) to power various appliances- AC/DC charging jack outlet- Reverse polarity alarm- Jumpstart manual switch- Connexion and charging status/complete indicator, battery capacity indicator and check button.

PART NO. BATTERY OUTPUT (A)710036 Lithium, 16800mAh 400 A

71016512V / 2Amp Smart Charger- 3-stage charging mode- Easy- to-read LED indicators- 6-ft power and output cords- Reverse hookup protection- Short circuit protection- ETL/FCC approval

PART NO. DESCRIPTION710164 Smart Battery Charger/Maintainer710165 Smart Battery Charger

710164On-Board Battery Charger/Maintainer- Automatically maintains batteries- Specially designed for vehicles in storage and for cold-weather maintenance of batteries- 1.5 A trickle charge- Reverse hook-up indication and protection- Mounting hardware allows for quick and easy attachment anywhere, including fender wells and battery trays, brackets and screws included- cETLus - Approved, rugged, molded plastic case resists gasoline, oil, water, solvent and acid- LED charge indicators: Red (solid in case of error or reverse polarity, flashing when no

connection is detected) and green (solid when fully charged, flashing when charging).

20

Vehicle BOOSTER PACK443 / MAI

71001212V Booster Pack and Power Station- Portable power to jump start vehicles, including cars, light trucks, marine and RVs, and charge ports for laptops, smart phones, Bluetooth and other devices- New generation of 16,000 mAh/59.2Wh capacity LiPO4 lithium polymer battery, boosts up to 30 vehicles on a single full charge- Starting current of 300A, peak current of 600A (3s)- 15V 1A input, fully charges in 4 hours- Super compact design : 6-1/2 X 2-3/4 X 1-3/16’’ (160 X 70 X 30mm)- Reverse polarity, reverse current, overheating, overcharge, shortcircuit, battery back current and overload protection, as well as vechicle ECM and electrical system protection- Operates in temperatures ranging from –20°C to 60°C- Includes: Intelligent booster cable and clamp set, built-in LED flashlight and digital readout, USB multi-adapter wire, electronic device jack adapters (8), 9V cord, AC power charger and handy carry

PART NO. DESCRIPTION OUTPUT (A)710012 12V Vehicle Booster Pack and Power Station 0.1-3 (5V) / 2 (12V) / 3.5 (16-19V) + 600A jumpstart

• Recommended• Useable

710417750W Power Inverter- Converts vehicle DC power to household AC power- 2 AC ports for 750W output- 2 USB ports / 3.1A shared- LCD screen to display in real time

• Output power consumption in % • Car battery voltage • Warning text

- Includes replaceable fuse in end cap.

CHARGInG UnITS - Useful Information

800A RECOMMENDED FOR GAS DIESELOutside Temperature 4 CYL. 6 CYL. 8 CYL. 4 CYL. 6 CYL. 8 CYL.

Warm (20°C) • • • • • •Cold (0°C) • • • • •

Extreme Cold (-18°C) • • • • •

400A RECOMMENDED FOR GAS DIESELOutside Temperature 4 CYL. 6 CYL. 8 CYL. 4 CYL. 6 CYL. 8 CYL.

Warm (20°C) • • • • •Cold (0°C) • • •

Extreme Cold (-18°C) • •

21

Booster CABLES AnD CLAMPS443 / MAI

Booster Cables- Crack resistant up to -50°C (-58°F)- 100% copper wire for higher conductivity and less resistance- 100% fine stranded copper wire and high-grade steel return spring- Tangle-free design remains flexible in cold weather- Comes with zippered vinyl storage case.

PART NO. DESCRIPTION CORD GAUGE LENGTH (ft) CLAMP TEMP.705700

Regular-Duty Cables

10 AWG 8 150 A -50°C (-58°F)705710 8 AWG 8 200 A -50°C (-58°F)705731 6 AWG 12 400 A -50°C (-58°F)705732 6 AWG 16 400 A -50°C (-58°F)705741

Heavy-Duty Cables4 AWG 12 400 A -50°C (-58°F)

705742 4 AWG 16 400 A -50°C (-58°F)705743 4 AWG 20 400 A -50°C (-58°F)705751

Professional Cables

2 AWG 12 500 A -50°C (-58°F)705752 2 AWG 16 500 A -50°C (-58°F)705753 2 AWG 20 500 A -50°C (-58°F)705754 2 AWG 24 500 A -50°C (-58°F)705762

Commercial Cables1 AWG 16’ 800 A -50°C (-58°F)

705763 1 AWG 20’ 800 A -50°C (-58°F)705764 1 AWG 24’ 800 A -50°C (-58°F)

Replacement Booster Clamps- 100% fine stranded copper wire and high-grade steel return spring.

PART NO. DESCRIPTION MAX. WIRE GAUGE CLAMP705800 1 neg. (-) / 1 pos. (+) 4 AWG 400 A705801 1 neg. (-) 4 AWG 400 A705802 1 pos. (+) 4 AWG 400 A705805 1 neg. (-) / 1 pos. (+) 2 AWG 500 A705806 1 neg. (-) 2 AWG 500 A705807 1 pos. (+) 2 AWG 500 A705811 1 neg. (-) 1 AWG 800 A705812 1 pos. (+) 1 AWG 800 A

705762705763705764

705800705801705803

705805705806705807

705811705812

705751705752705753705754

705741705742705743

22

LIGHTInG443 / MAI

PART NO. DESCRIPTION MAX. LUMENS RUN TIME (hrs)* BATTERY TYPE702021 24 LED Work Light 35 3.5 @ 35 Lumens 3 x AA

702022 36 + 5 LED Work Light 45 1 @ 45 Lumens 2 @ 20 Lumens 3 x AAA

702031 COB Work Light + 5 LED 80 1 @ 80 Lumens 2 @ 20 Lumens 3 x AA

702034 3W + 1W COB LED Work Light 80 3.5 @ 80 Lumens 10 @ 20 Lumens 3 x AAA

702041 Slimline COB LED Work Light, 2W 250 3 @ 250 Lumens Li-Ion702042 Slimline COB LED Mini Work Light, 2W 180 2 @ 180 Lumens Li-Ion

702107 Industrial COB LED Work Lamp, 10W 1100 3 @ 1100 Lumens 6 @ 350 Lumens Li-Ion 3,7V 4400mAh

* Estimated run time, will be affected by various factors such as the battery’s level of charge, type and condition as well as the lamp setting used.

70202124 LED Work Light- Rubberized housing- 360° pivoting hook and magnet on the back.

70202236 + 5 LED Work Light- 360° pivoting hook- 0-180° tilting body on magnetized base.

702031COB Work Light + 5 LED- 360° pivoting hook- 0-180° tilting body on magnetized base.

7020343W + 1W COB LED Work Light- Folding metal hook- 360° pivoting head and 0-180° tilting body on magnetized base.

702042COB LED Mini Slimline Work Light- Magnetic pocket clip- Rubberized anti-slip housing- Charges in 2 hours with USB port (or 3 hours via AC).

702041COB LED Slimline Work Light- 2-position on/off switch (floodlight, headlight)- Magnetic back and fold-out metal hook- Rubberized anti-slip housing- Charges in 2 hours with USB port (or 3 hours via AC).

702107Industrial COB LED Work Lamp- Industrial 10W COB LED work light- Max. output: 1,100 Lumens (high mode), 350 Lumens (low mode)- 3.7V lithium-ion 4400mAh battery- Charging time: 6 hours; AC adapter: 5V, 1A- Power bank function for charging cell phones- Power display function for charge status- Durable rubber coated aluminum housing with 180° swivel support- Recharges in 3.5 hours.

23

LIGHTInG443 / MAI

PART NO. DESCRIPTION MAX. LUMENS RUN TIME (hrs)* BATTERY TYPE HOUSING CLASS.**

702230 Rechargeable High-Performance Zoom Flashlight 200 2 @ 200 Lumens 5 @ 100 LumensLi-Ion 3,7V 2200mAh IP54

702243 Compact High-Performance Zoom Flashlight 250 1.5 @ 250 Lumens 3 @ 70 Lumens 3 x AAA IP54

702245 High-Performance Slim Zoom Flashlight 100 1.5 @ 100 Lumens 3 @ 30 Lumens 2 x AAA IP54

702201 Rechargeable Flashlight / Inspection Light 350 3 @ 350 Lumens Li-Ion 3,7V 2200mAh IP54

* Estimated run time, will be affected by various factors such as the battery’s level of charge, type and condition as well as the lamp setting used.** These units are not watertight. An IPX4 rated housing should provide a very high protection against dust and withstand a substantial amount of water (jet). An IP65 rated housing should provide a very high protection against dust and withstand a light spraying. An IP54 rated housing should provide a good protection against dust and withstand limited splashing. The level of any protection depends on the condition of the housing.

702243Compact High-Performance Flashlight- XPG high-performance LED light- Beam distance: 100 m- Anodized aluminum body with tactical clip, magnetic base- Operates on 3 AAA batteries.

702230Rechargeable High-Performance Flashlight - XPG high-performance LED light- Beam distance: 140 m- Anodized aluminum body and magnetic base.

702245High-Performance Slim Flashlight- XPG high-performance LED light- Beam distance: 50m- Anodized aluminum body with tactical clip, magnetic base- Operates on 2 AAA batteries.

702201Rechargeable Inspection Light / Flashlight- Lamp converts from flashlight to ultra-slim inspection light thanks to the two

interchangeable heads (XML T6 High Performance LED and COB LED)- Beam distance: 150 m (flashlight), 50m (slim light)- Metal body with magnetic base- USB charging cable and AC adaptor.

PART NO. DESCRIPTION MAX. LUMENS703050 COB LED Electric Work Lamp (25’ cord) 700 + 50703515 COB LED Electric Work Lamp (50’ cord on Reel) 700 + 50

Powerful COB LED Electric Work Light- 700-Lumen front COB, 50-Lumen top COB- IP54 housing, dust and water resistant- 18/2 SJTOW wire (oil, grease and cold resistant)- CSA certified- Model 703050 has a 25’ cord, Model 703515 has a 50’ cord and a retractable reel.

703515703050

24

LIGHTInG443 / MAI

PART NO. DESCRIPTION MAX. LUMENS RUN TIME (hrs)* BATTERY TYPE702001 3W COB LED Pen Light 150 5 @ 150 Lumens 3 x AAA702002 2W COB LED Flashlight 140 5.5 @ 140 Lumens 3 x AAA702005 12 + 1 LED Flashlight 150 6.5 @ 150 Lumens 3 x AAA702006 7 LED Flashlight, 21000 mcd 120 10 @ 120 Lumens 3 x AAA

702011 8 SMD LED Flashlight 250 3 @ 250 Lumens5 @ 120 Lumens 3 x AAA

702205 Camping Lantern / Flashlight 200 -- 3 x AA

* Estimated run time, will be affected by various factors such as the battery’s level of charge, type and condition as well as the lamp setting used.

7020067 LED Flashlight, 21000 mcd- Magnetized clip, turns 180°.

7020118 SMD LED Flashlight- Dual intensity settings- Battery level indicator- 360° pivoting hook, 0-180° tilting body and magnetized base.

7020022W COB LED Flashlight- Aluminum body- Magnetized clip, turns 180°.

70200512 + 1 LED Flashlight- Magnetized clip, turns 180°.

7020013W COB LED Pen Light- Magnetized clip, turns 180°- Cord and hook.

702205Camping Lantern / Flashlight- 3W COB LED lamp- Max.output: 200 Lumens (lantern), 60 Lumens (flashlight)- Closed 180° hanger and swivel handle- Operates on 3 AA batteries.

25

LIGHTInG443 / MAI

PART NO. DESCRIPTION MAX. LUMENS RUN TIME (hrs)* BATTERY TYPE HOUSING CLASS.**

702106 High-Impact Rechargeable Flood Light 900 3.5 @ 900 Lumens 6 @ 450 LumensLi-Ion 7,4V 4400mAh IP65

702305 Rechargeable Head Lamp 150 4 @ 150 Lumens 12 @ 50 LumensLi-Ion 3,7V 2200mAh IPX4

702061 24 SMD Under Hood Work Lamp with Hooks 350 4 @ 350 Lumens 8 @ 175 Lumens Li-Ion --

703020 Rechargeable CRI Detailing Work Light 400 1 @ 400 Lumens 3 @ 180 LumensLi-Ion 3,7V 2200mAh IP65

* Estimated run time, will be affected by various factors such as the battery’s level of charge, type and condition as well as the lamp setting used.** These units are not watertight. An IPX4 rated housing should provide a very high protection against dust and withstand a substantial amount of water (jet). An IP65 rated housing should provide a very high protection against dust and withstand a light spraying. An IP54 rated housing should provide a good protection against dust and withstand limited splashing. The level of any protection depends on the condition of the housing.

70206124 SMD Rechargeable Under-Hood Work Lamp with Hooks- Settings: High and low- Telescopic foam-covered hooks- Folds for easy storage- Stretches up to 6 feet- Lithium battery recharges in 6 hours.

702305Rechargeable Head Lamp- Multifunction COB lamp- Settings: High, low and strobe- Charges in 4 hours- Charger included.

703020Rechargeable Work Light for Color Matching- COB LED work light designed for painting and polishing jobs, ideal for optimal quality control of prep zones and indispensable for precision color matching- Provides a unique, uniform and completely even illumination with only one shadow, which makes it particularly effective for detailing and avoiding costly re-painting- Highly resistant for extreme workshop conditions : Impact-resistant (1m) housing and solvent-resistant replaceable glass lens- Ultra-high Color Rendering Index (CRI) : 95*- Housing rating: IP65- Recharges in only 4 hours (integrated charge indicator)- 180° adjustable lighting angle, 360° swivel hook and magnets on the back.

* The Color Rendering Index, or CRI, indicates the ability of a light source to reveal the colors of various objects faithfully under a specific temperature of natural light (warm or cool), allowing precision color-matching. The maximum possible CRI value is 100.

702106High-Impact Rechargeable Flood Light- Industrial 10W LED flood light with dual

intensity mode- Charges in 4 hours- APC technology (Automatic Power Control)- ±60° adjustable lighting angles, 180° swivel

magnetic base- Durable, impact resistant rubber coated

aluminum housing with retractable hanger and charging port

- USB charging cable and AC adaptor.

26

Extension CORDS443 / MAI

PART NO. DESCRIPTION CORD (FT) TAPS GRADE V / A LIGHTED ENDS CORD COLOR704256 Block Heater 6.5 3 16/3 SJTW 125V/13A Blue704257 Block Heater 9.8 3 16/3 SJTW 125V/13A Blue704258 Block Heater 16.4 3 16/3 SJTW 125V/13A Blue

704202 Contractor Grade 25 1 16/3 SJTW 125V/13A Dark Green704362 Contractor Grade 25 3 14/3 SJTW 125V/15A √ Dark Green704333 Contractor Grade 50 1 12/3 SJTW 125V/15A √ Dark Green704323 Contractor Grade 50 1 14/3 SJTW 125V/15A √ Dark Green704203 Contractor Grade 50 1 16/3 SJTW 125V/13A Dark Green704363 Contractor Grade 50 3 14/3 SJTW 125V/15A √ Dark Green704334 Contractor Grade 100 1 12/3 SJTW 125V/15A √ Dark Green704324 Contractor Grade 100 1 14/3 SJTW 125V/13A √ Dark Green704204 Contractor Grade 100 1 16/3 SJTW 125V/10A Dark Green704374 Contractor Grade 100 3 12/3 SJTW 125V/15A √ Dark Green704365 Contractor Grade 100 3 14/3 SJTW 125V/15A √ Dark Green

704282 Industrial Grade 25 1 12/3 SJTOW 125V/15A √ Neon Green704392 Industrial Grade 25 3 12/3 SJTOW 125V/15A √ Neon Green704272 Industrial Grade 25 1 14/3 SJTOW 125V/15A √ Neon Green704382 Industrial Grade 25 3 14/3 SJTOW 125V/15A √ Neon Green704262 Industrial Grade 25 1 16/3 SJTOW 125V/13A √ Neon Green704283 Industrial Grade 50 1 12/3 SJTOW 125V/15A √ Neon Green704393 Industrial Grade 50 3 12/3 SJTOW 125V/15A √ Neon Green704273 Industrial Grade 50 1 14/3 SJTOW 125V/15A √ Neon Green704383 Industrial Grade 50 3 14/3 SJTOW 125V/15A √ Neon Green704263 Industrial Grade 50 1 16/3 SJTOW 125V/13A √ Neon Green704285 Industrial Grade 100 1 12/3 SJTOW 125V/15A √ Neon Green704395 Industrial Grade 100 3 12/3 SJTOW 125V/15A √ Neon Green704275 Industrial Grade 100 1 14/3 SJTOW 125V/13A √ Neon Green704385 Industrial Grade 100 3 14/3 SJTOW 125V/13A √ Neon Green704265 Industrial Grade 100 1 16/3 SJTOW 125V/10A √ Neon Green704422 Industrial Grade 25 1 14/3 SJTOW 125V/13A √ Dark Green704412 Industrial Grade 25 1 16/3 SJTOW 125V/13A √ Dark Green704433 Industrial Grade 50 1 12/3 SJTOW 125V/15A √ Dark Green704423 Industrial Grade 50 1 14/3 SJTOW 125V/13A √ Dark Green704413 Industrial Grade 50 1 16/3 SJTOW 125V/13A √ Dark Green704414 Industrial Grade 100 1 16/3 SJTOW 125V/13A √ Dark Green

704472 Premium Grade 25 1 12/3 SJEOW 125V/13A √ Blue704462 Premium Grade 25 1 14/3 SJEOW 125V/15A √ Blue704452 Premium Grade 25 1 16/3 SJEOW 125V/13A √ Blue704473 Premium Grade 50 1 12/3 SJEOW 125V/13A √ Blue704463 Premium Grade 50 1 14/3 SJEOW 125V/15A √ Blue704453 Premium Grade 50 1 16/3 SJEOW 125V/13A √ Blue704475 Premium Grade 100 1 12/3 SJEOW 125V/13A √ Blue704465 Premium Grade 100 1 14/3 SJEOW 125V/13A √ Blue704455 Premium Grade 100 1 16/3 SJEOW 125V/10A √ Blue

704362704363704365704374

704262704263704265704272704273704275704282704283704285

704382704383704385704392

704393704395

704452704453704455704462704463704465

704472704473704475

704256704257704258

704202704203704204

704412704413704414704422704423704433

704322704323704324704333704334

27

Useful InFORMATIOn

Extension REELS443 / MAI

Electrical Cord Ratings

DESIGNATION LETTER MEANINGS Flexible cord designed for general useW Rated for outdoor useJ Standard 300V insulation (if there is no J in the designation, the cord has thicker, 600V insulation, designed for heavier use)P Parallel wire construction, used in air conditioner cords and household extension cordsT Cord jacket is made from vinyl thermoplasticE Cord jacket is made from thermoplastic elastomer rubber (TPE)O Cord is oil-resistant

Electrical Cord Selection GuideUse this chart to select the cord gauge you need based on the Amperage your appliances require.

CORD LENGTH (ft) 0-2 A 2-5 A 5-7 A 7-10 A 10-12 A 12-15 A 16-20 A25 16 gauge 16 gauge 16 gauge 16 gauge 14 gauge 14 gauge 12 gauge50 16 gauge 16 gauge 16 gauge 14 gauge 14 gauge 12 gauge 12 gauge100 16 gauge 16 gauge 14 gauge 12 gauge 12 gauge 10 gauge 8 gauge

The power requirements for some devices are listed in watts, rather than amps. In this case, use this formula to convert the rating to amps: Watts / 110 = Amps For instance, a 100W bulb would require 0.9A (100W/110 = 0.9A).

704515

704503

704525

Retractable Extension on Reels- Polarized plug grounded receptacles- Flexible down to -50°C- 13A breaker with reset button (on model 704525).

PART NO. DESCRIPTION CORD LENGTH (ft) VOLTAGE TEMP. TAPS704515 Metal Reel 14/3 SJTW 30 125V / 13A -50°C (-58°F) 3704503 Composite Reel 12/3 SJTW 50 125V / 15A -50°C (-58°F) 4704525 Plastic Reel 16/3 SJTW 25 125V / 13A -50°C (-58°F) 4

28

Bench GRInDERS436 / MAE

Bench Grinders- 120V / 60Hz single phase induction motor- Includes: 2 eye shields (one oval, one with magnifier) and 2 grinding wheels- Coolant tray and integrated lights on models 720026 and 720028.

PART NO. DESCRIPTION INPUT (A) POWER (HP) WHEEL SIZE (in) ARBOR SIZE (in) TOOL REST NO LOAD SPEED (RPM)720006 Regular Duty 2.1 1/3 6 x 3/4 1/2 Fixed 3450720016 Heavy-Duty 2.1 1/3 6 X 3/4 5/8 Adjustable 3600720018 Heavy-Duty 3 1/2 8 x 1 5/8 Adjustable 3600720026 Commercial Duty 2.8 1/2 6 X 3/4 1/2 Fixed 3600720028 Commercial Duty 4.8 3/4 8 X 1 5/8 Fixed 3600

720006

720016720018

720026720028

Pressurized ABRASIVE BLASTERS436 / MAE

803010- 10-Gallon Pressurized Abrasive Blaster- Holds 40 lbs of abrasive material- Working pressure: 60 – 125 PSI- CFM requirement: 6 – 25 CFM- Includes: 1- pressure tank, 1- nozzle, 1- pressure gauge, 4- assorted ceramic nozzles,

1- 8-1/2” hose, 1- 6” rubber wheels, 1- filling funnel, 1- water trap, and 1- canvas hood.

803020- 20-Gallon Pressurized Abrasive Blaster- Holds 40 lbs of abrasive material- Working pressure: 60 – 125 PSI- CFM requirement: 6 – 25 CFM- Includes: 1- pressure tank, 1- nozzle, 1- pressure gauge, 4- assorted ceramic nozzles,

1- 8-1/2” hose, 2- 6” rubber wheels, 1- filling funnel, 1- water trap, and 1- canvas hood.

29

VISES and Anvils436 / MAE

Vises

PART NO. DESCRIPTION SIZE (in) JAW OPENING (in) THROAT DEPTH (in) WEIGHT (lb) SWIVEL BASE500201 Ultimate-Duty SNG Ductile Iron Bench Vise 4 4.5 2.7 33.04500202 Ultimate-Duty SNG Ductile Iron Bench Vise 5 5.5 3.3 53.96500203 Ultimate-Duty SNG Ductile Iron Bench Vise 6 6.5 3.5 76.43500204 Ultimate-Duty SNG Ductile Iron Bench Vise 8 8.5 4 92.51500211 SNG Ductile Iron Utility Bench Vise 6 6.3 2.9 41.85 √500232 Multi-Purpose Rotary Bench Vise 5 5.2 3.1 72.67 √500243 All Steel Fabricated Vise 6 6.3 2.9 41.85500253 All Steel Fabricated Offset Vise 6 6.5 4 42500271 Industrial SNG Ductile Iron Vise 4 4.5 2.5 31.94 √500272 Industrial SNG Ductile Iron Vise 5 5.5 3 49.56 √500273 Industrial SNG Ductile Iron Vise 6 6.5 3.4 63.88 √500274 Industrial SNG Ductile Iron Vise 8 8.3 3.8 79.31 √

500302SG Iron Anvil- 80,000 PSI tensile strength- Spheroidal nodular graphite ductile iron for ultimate

strength and impact resistance- Ideal for forming and shaping steel- Weight: 48.46lbs.

500201 / 500202 500203 / 500204- 80,000 PSI tensile strength- Precision-machined and hardened steel jaws- Acme threads for added strength- Chrome-plated tommy bar with rubber washers.

500232 - 80,000 PSI tensile strength- Precision machined & hardened steel jaws- Acme threaded spindle- Chrome plated tommy bar with rubber washers- Interchangeable hardened pipe jaws- Hardened anvil striking surface.

500253 - Precision-machined and hardened steel jaws- Chrome tommy bar with washers- Acme threaded spindle- Designed for holding tall work pieces.

500211 - 80,000 PSI tensile strength- Precision machined & hardened steel jaws- Acme threaded spindle- Chrome plated tommy bar with rubber washers- Hardened anvil striking surface- Built-in pipe jaws.

500243- Precision-machined and hardened steel jaws- Chrome tommy bar with washers- Acme threaded spindle- Designed for heavy-duty holding and clamping.

500271 / 500272500273 / 500274 - 80,000 PSI tensile strength- Precision machined & hardened steel jaws- Acme threaded spindle- Chrome plated tommy bar with rubber washers- Hardened anvil striking surface for forming & shaping- Built in pipe jaws to hold round & flat stock.

30

500201 . . . . . 29

500202 . . . . . 29

500203 . . . . . 29

500204 . . . . . 29

500211 . . . . . 29

500232 . . . . . 29

500243 . . . . . 29

500253 . . . . . 29

500271 . . . . . 29

500272 . . . . . 29

500273 . . . . . 29

500274 . . . . . 29

500302 . . . . . 29

600020 . . . . . . . 9

600022 . . . . . . . 9

600028 . . . . . . . 9

600030 . . . . . . . 9

600032 . . . . . . . 9

600033 . . . . . . . 9

600034 . . . . . . . 9

600040 . . . . . . . 9

600050 . . . . . . . 9

600095 . . . . . 10

600096 . . . . . 10

600100 . . . . . 10

600101 . . . . . 10

600102 . . . . . 10

600103 . . . . . 10

600105 . . . . . 11

600106 . . . . . 11

600107 . . . . . 11

600108 . . . . . 11

600109 . . . . . 11

600115 . . . . . 11

600116 . . . . . 11

600131 . . . . . 11

600132 . . . . . 11

600133 . . . . . 11

600134 . . . . . 11

600135 . . . . . 11

600136 . . . . . 11

600137 . . . . . 11

600140 . . . . . 11

600152 . . . . . . . 9

600450 . . . . . . . 4

600460 . . . . . . . 4

600465 . . . . . . . 4

600512 . . . . . 10

600513 . . . . . 10

600520 . . . . . 10

600521 . . . . . 10

600530 . . . . . . . 8

600540 . . . . . . . 4

600541 . . . . . . . 4

600543 . . . . . . . 5

600545 . . . . . . . 4

600546 . . . . . . . 4

600548 . . . . . . . 5

600549 . . . . . . . 5

600580 . . . . . . . 4

600581 . . . . . . . 4

600582 . . . . . . . 4

600585 . . . . . . . 8

600590 . . . . . . . 8

600592 . . . . . . . 8

600595 . . . . . . . 8

600620 . . . . . . . 8

600800 . . . . . 12

600801 . . . . . 12

600810 . . . . . 12

600811 . . . . . 12

600812 . . . . . 12

601003 . . . . . . . 5

601004 . . . . . . . 5

601030 . . . . . . . 5

601060 . . . . . . . 5

601061 . . . . . . . 5

601062 . . . . . . . 5

601063 . . . . . . . 5

601300 . . . . . 12

601301 . . . . . 12

601302 . . . . . 12

601303 . . . . . 12

601305 . . . . . 12

601306 . . . . . 12

601322 . . . . . . . 8

601323 . . . . . . . 8

601625 . . . . . . . 5

702001 . . . . . 24

702002 . . . . . 24

702005 . . . . . 24

702006 . . . . . 24

702011 . . . . . 24

702021 . . . . . 22

702022 . . . . . 22

702031 . . . . . 22

702034 . . . . . 22

702041 . . . . . 22

702042 . . . . . 22

702061 . . . . . 25

702106 . . . . . 25

702107 . . . . . 22

702201 . . . . . 23

702205 . . . . . 24

702230 . . . . . 23

702243 . . . . . 23

702245 . . . . . 23

702305 . . . . . 25

703020 . . . . . 25

703050 . . . . . 23

703515 . . . . . 23

704202 . . . . . 26

704203 . . . . . 26

704204 . . . . . 26

704256 . . . . . 26

704257 . . . . . 26

704258 . . . . . 26

704262 . . . . . 26

704263 . . . . . 26

704265 . . . . . 26

704272 . . . . . 26

704273 . . . . . 26

704275 . . . . . 26

704282 . . . . . 26

704283 . . . . . 26

704285 . . . . . 26

704323 . . . . . 26

704324 . . . . . 26

704333 . . . . . 26

704334 . . . . . 26

704362 . . . . . 26

704363 . . . . . 26

704365 . . . . . 26

704374 . . . . . 26

704382 . . . . . 26

704383 . . . . . 26

704385 . . . . . 26

704392 . . . . . 26

704393 . . . . . 26

704395 . . . . . 26

704412 . . . . . 26

704413 . . . . . 26

704414 . . . . . 26

704422 . . . . . 26

704423 . . . . . 26

InDEx by Part Number

31

704433 . . . . . 26

704452 . . . . . 26

704453 . . . . . 26

704455 . . . . . 26

704462 . . . . . 26

704463 . . . . . 26

704465 . . . . . 26

704472 . . . . . 26

704473 . . . . . 26

704475 . . . . . 26

704503 . . . . . 27

704515 . . . . . 27

704525 . . . . . 27

704552 . . . . . 26

705700 . . . . . 21

705710 . . . . . 21

705731 . . . . . 21

705732 . . . . . 21

705741 . . . . . 21

705742 . . . . . 21

705743 . . . . . 21

705751 . . . . . 21

705752 . . . . . 21

705753 . . . . . 21

705754 . . . . . 21

705762 . . . . . 21

705763 . . . . . 21

705764 . . . . . 21

705800 . . . . . 21

705801 . . . . . 21

705802 . . . . . 21

705805 . . . . . 21

705806 . . . . . 21

705807 . . . . . 21

705811 . . . . . 21

705812 . . . . . 21

710012 . . . . . 20

710035 . . . . . 19

710036 . . . . . 19

710135 . . . . . 18

710138 . . . . . 18

710145 . . . . . 18

710148 . . . . . 18

710164 . . . . . 19

710165 . . . . . 19

710417 . . . . . 20

720006 . . . . . 28

720016 . . . . . 28

720018 . . . . . 28

720026 . . . . . 28

720028 . . . . . 28

800080 . . . . . 16

800084 . . . . . 16

800094 . . . . . 16

800104 . . . . . 16

800105 . . . . . 16

800114 . . . . . 16

800115 . . . . . 16

800120 . . . . . 16

800125 . . . . . 16

801013 . . . . . 13

801015 . . . . . 13

801017 . . . . . 13

801023 . . . . . 13

801025 . . . . . 13

801053 . . . . . 13

801055 . . . . . 13

801063 . . . . . 13

801065 . . . . . 13

801067 . . . . . 13

801073 . . . . . 13

801075 . . . . . 13

801077 . . . . . 13

801113 . . . . . 13

801115 . . . . . 13

801123 . . . . . 13

801125 . . . . . 13

801213 . . . . . 13

801215 . . . . . 13

802011 . . . . . 14

802021 . . . . . 14

802022 . . . . . 14

802031 . . . . . 14

802032 . . . . . 14

802071 . . . . . 14

802073 . . . . . 14

802074 . . . . . 14

802081 . . . . . 14

802082 . . . . . 14

802083 . . . . . 14

802084 . . . . . 14

802091 . . . . . 14

802101 . . . . . 14

802102 . . . . . 14

802111 . . . . . 14

802112 . . . . . 14

802113 . . . . . 14

802121 . . . . . 14

802122 . . . . . 14

802123 . . . . . 14

802131 . . . . . 15

802133 . . . . . 15

802134 . . . . . 15

802141 . . . . . 15

802142 . . . . . 15

802143 . . . . . 15

802144 . . . . . 15

802151 . . . . . 15

802161 . . . . . 15

802162 . . . . . 15

802171 . . . . . 15

802172 . . . . . 15

802191 . . . . . 15

802192 . . . . . 15

802201 . . . . . 15

802411 . . . . . 15

803010 . . . . . 28

803020 . . . . . 28

810000 . . . . . 17

810005 . . . . . 17

810010 . . . . . 17

810105 . . . . . 17

810110 . . . . . 17

810301 . . . . . 17

810302 . . . . . 17

810311 . . . . . 17

901003 . . . . . . . 3

901004 . . . . . . . 3

901005 . . . . . . . 3

901012 . . . . . . . 3

901013 . . . . . . . 3

901014 . . . . . . . 3

901015 . . . . . . . 3

901016 . . . . . . . 3

901023 . . . . . . . 3

901024 . . . . . . . 3

901025 . . . . . . . 3

901026 . . . . . . . 3

902005 . . . . . . . 3

902007 . . . . . . . 3

902010 . . . . . . . 3

InDEx by Part Number

06D1MAKE18Q1 Mäktig, Bumper to Bumper and Auto Parts Plus are registered trademarks of Uni-Select Inc.

B E Y O N D P O W E R

For more information on our products, visit

WWW.GOMAKTIG.COM