Beverage Product Catalogue - Installation Parts Supply Beverage Catalog.pdf80 psi (5.5 bar) max. 30 psi (2.1 bar) max. 6.0 oz. (177.4 ml)/ sec. - Open Flow NSF listed, CE 3 years G56

Beverage Product Catalogue Flojet | Alcon

BEVERAGE CATALOGUE

01 Beverage / Beer PumPs - gas (C02)/air Driven 06

Selection Guide 08

Introduction 10

V-Jet Fizz 12

T5000 Series 13

G55 Series 14

G58 Series 15

G56 Beerjet 16

G80 PulpJet 17

02 Beer/soDa Chilling PumPs - Centrifugal 18

Selection Guide 20

Introduction 24

V-Jet Cool 25

HPR Series 26

VM Series 27

GP Series 28

GP28/11 Series 29

GP50/25 Series 30

SPC8/2 Series 31

SPC12/4 Series 31

SPC51 Series 32

SPC42 Series 32

SPC43 Series 33

SPC44 Series 33

SPC18 Series 34

03 Coffee & tea PumPs / sYstems 36

Selection Guide 38

Introduction 40

V-Jet Espress 41

Dual Inlet Bottled Water Systems 42

BevJet Compact 43

100 Series 44

Pumps

03 Coffee & tea PumPs / sYstems ContinueD...

300 Series 45

900 Series 46

2000 Series 47

Solenoid Valve Technical Data 48

04 Water Booster sYstems

50

Selection Guides 52

Introduction 54

G60 Series 55

K56 Series 56

2820 Series 57

2840 Series 58

2830 Series 59

Water Pressure Regulators 60

Pressurized Accumulator Tank 60

Pressurized Mini Accumulator Tank 61

Pressurized Large Accumulator Tank 61

05 eleCtriC Bag-in-Box PumPs 62

Introduction 64

BevJet Compact 65

BevJet 66

2125 Series 67

06 BottleD Water sYstems 68

Single Inlet Bottled Water System 70

Dual Inlet Bottled Water Systems 71

07 general PumPs 72

Demand & Manual Single Fixture Pumps - LF Series 74

Water Booster /Delivery Pumps - Duplex II Series 75

Water Booster /Delivery Pumps - Triplex Series High Pressure Pump 76

AC VSD Series Pumps - Quad Model 77

07 Beverage solenoiD valves 78

Introduction 80

100 Series 81

300 Series 82

900 Series 83

2000 Series 84

Solenoid Valve Technical Data 85

08 aCCessories & fittings 86

Mounting Brackets 88

Extractor/Dryer 89

Strainers 89

Flow Reversal Valve 89

Transfer Valves 90

Syrup Sold Out Switch 90

Auto Shutoff 90

Gas Pump - Liquid Fittings 91

Gas Pump - Air Fittings 91

John Guest Fittings 92

Electric Pump Fittings 92

09 Conversion Data 96

10 run rise Charts 97

11 WarrantY & return PoliCY 99

Valves

Accessories and Fittings

Technical Information

02 03

BEVERAGE CATALOGUE

Contents Contents

Beverage Catalogue

Contents A

04 05

OVERVIEW OF PARTS

Exploded View

BOverview of parts

Exploded View

BIB backroom pumps

Flojet provides industry-leading T and G series pumps capable of dispensing syrups, juices and wines long distances from the backroom to the dispense tap.

Recirculation and carbonation pumps

Flojet provides a range of pumps for carbonated water recirculation and for water boosting in ambient and cold water carbonation systems.

Beer cooling and dispensing pumps

Flojet provides a range of pumps to recirculate glycol or water through pythons and trunk lines, as well as the industry-leading G56 BeerJet for dispensing beer over short and long distances accurately and efficiently.

Coffee and tea pumps

Flojet has developed several systems dedicated to providing water pressure to the back of coffee, espresso and tea systems. These systems can dispense water from bottles or can be used to boost city water pressure or simply provide water to a tap or faucet.

Integral font/tap dispense pumps

Flojet has a range of electric pumps small enough and quiet enough to fit inside some fonts and taps to provide on-demand dispense of BIB drinks at the bar.

BIB under-bar/countertop dispense pumps

Along with the backroom BIB pumps, Flojet T and G series pumps can also be used under the bar to dispense almost anything from a BIB system.

Flash and shelf cooler pumps

Flojet has a range of pumps designed to be long-lasting and efficient for recirculating cooling liquid through flash and shelf cooler systems.

0706

Pouring over 18 million pints per day globally

Selection Guide

Introduction

V-Jet Fizz

T5000 Series

G55 Series

G58 Series

G56 Beerjet

G80 PulpJet

Beverage / Beer Pumps - Gas 01

012

T5000 Series Model: Product Inlet Fitting: Product Outlet: Gas Inlet Fitting: Pump Design: Power Source: Materials of Construction (wetted parts):

Temperature Limits:

Weight: Dimensions:(Height x Width x Depth)

Displacement: Self Priming:

Operating Pressure: Liquid Inlet Pressure:

Flow Rate: Approvals: Warranty:

T5000-130 ³/8” (9.52 mm) Barbed Straight Plastic (Celcon)

³/8” (9.52 mm) Barbed Straight Plastic (Celcon)

¼” (6.35 mm) CO2 Inlet Plastic (Celcon)

Positive Displacement, Double Diaphragm

CO2 Gas, Nitrogen or Compressed Filtered Air

T5000 Polypropylene, Santoprene®, EPDM, 302 or 304 Stainless Steel Spring

34˚ to 120˚ F (1.1˚ to 49˚ C)

1.19 lb (0.54 kg)

5.17" x 6.18" x 2.42" (131.3 mm x 156.8 mm x 61.5 mm)

2.5 oz. per cycle Up to 10 ft. (3.05 m)

20 psi (1.4 bar) min. / 80 psi (5.5 bar) max.

10 psi (0.7 bar) max.

4.0 oz. (118.3 ml)/sec. - Open Flow

CE, NSF Standard 18

5 Years


¼" (6.35 mm) Barbed Straight Stainless Steel

¼" (6.35 mm) CO2 Shutoff Brass




34˚ to 120˚ F (1.1˚ to 49˚ C)

1.19 lb (0.54 kg)

5.17" x 6.18" x 2.42" (131.3 mm x 156.8 mm x 61.5 mm)





CE, NSF Standard 18

5 Years


³/8” (9.52 mm) Barbed Straight Stainless Steel





34˚ to 120˚ F (1.1˚ to 49˚ C)

1.19 lb (0.54 kg)

5.17" x 6.18" x 2.42" (131.3 mm x 156.8 mm x 61.5 mm)





CE, NSF Standard 18

5 Years

T5000-135 (Without Auto Shutoff)

None None None Positive Displacement, Double Diaphragm



34˚ to 120˚ F (1.1˚ to 49˚ C)

1.19 lb (0.54 kg)

5.17" x 6.18" x 2.42" (131.3 mm x 156.8 mm x 61.5 mm)





CE, NSF Standard 18

5 Years

T5000-153 High Altitude Pump







34˚ to 120˚ F (1.1˚ to 49˚ C)

1.19 lb (0.54 kg)

5.17" x 6.18" x 2.42" (131.3 mm x 156.8 mm x 61.5 mm)





CE, NSF Standard 18

5 Years

G58 Series Model: Product Inlet Fitting: Product Outlet: Gas Inlet Fitting: Pump Design: Power Source: Materials of Construction (wetted parts):

Temperature Limits:


Displacement: Self Priming: Operating Pressure: Liquid Inlet Pressure:


G58-1022 ³/8” (9.52 mm) Barbed Straight Stainless Steel




CO2 Gas, Nitrogen or Compressed Dry Filtered Air

Polypropylene, Santoprene®, EPDM, AISI 303 & 304 Stainless Steel

34˚ to120˚ F (1.1˚ to 49˚ C)

1.24 lb (0.56 kg)

5.27" x 3.21" x 4.58" (133.8 mm x 81.5 mm x 116.3 mm)




6.0 oz. (177.4 ml) /sec. - Open Flow

CE, NSF Standard 18

3 Years

01 Beverage/Beer PumpsSELECTION GUIDE

G55 Series Model: Product Inlet Fitting: Product Outlet: Gas Inlet Fitting: Pump Design: Power Source: Materials of Construction (wetted parts):

Temperature Limits:

Weight: Dimensions: (Height x Width x Depth)

Displacement: Self Priming:

Operating Pressure: Liquid Inlet Pressure:


G55-1022 ³/8” (9.52 mm)Barbed Straight Stainless Steel

³/ 8” (9.52 mm) Barbed Straight Stainless Steel





34˚ to 120˚ F (1.1˚ to 49˚ C)

1.24 lb (0.56 kg)

5.27" x 3.21" x 4.58" (133.8 mm x 81.5 mm x 116.3 mm)





CE, SK, NSF Standard 18

5 Years







34˚ to 120˚ F (1.1˚ to 49˚ C)

1.24 lb (0.56 kg)

5.27" x 3.21" x 4.58" (133.8 mm x 81.5 mm x 116.3 mm)






5 Years

G80 PulpJet Model: Product Inlet Fitting: Product Outlet: Gas Inlet Fitting: Pump Design: Power Source: Materials of Construction (wetted parts):

Temperature Limits:




G80-1022 ³/8” (9.52 mm) Barbed Straight Stainless Steel


¼” (6.35 mm) CO2 Shutoff Brass

Positive Displacement, Double Diaphragm,Duckbill Valve Patent Pending



34° to 120° F (1.1° to 49° C)

1.24 lb (0.56 kg)

5.27” x 3.21”x 4.58” (133.8 mm x 81.5 mm x 116.3 mm)





NSF listed, CE

3 years

G56 Beerjet Model: Product Inlet Fitting: Product Outlet: Gas Inlet Fitting: Pump Design: Power Source: Materials of Construction (wetted parts):

Temperature Limits:




G56-1202 10 - 13 mm (³/8”-½") Barbed Straight Plastic (Polypropylene)

10 - 13 mm (³/8”-½") Barbed Straight Plastic (Polypropylene)



CO2, Nitrogen or Compressed Dry Filtered Air

Polypropylene, Santoprene®, EPDM, AISI 304 Stainless Steel

30˚ to 120˚ F (1.1˚ to 49˚ C)

1.24 lb (0.56 kg)

5.27"x 3.21"x 4.58" (133.8 mm x 81.5 mm x 116.3 mm)

3.2 oz. (91 ml) per cycle

Up to 10 ft. (3.05 m)



5 GPM (18.9 LPM) - Open Flow


3 Years

G56-1162 10 - 13 mm (³/8”-½") Barbed Straight Plastic

10 - 13 mm (³/8”-½") Barbed Elbow Plastic



CO2, Nitrogen or Compressed Dry Filtered Air


30˚ to 120˚ F (1.1˚ to 49˚ C)

1.24 lb (0.56 kg)

5.27" x 3.21" x 4.58" (133.8 mm x 81.5 mm x 116.3 mm)

3.2 oz. (91 ml) per cycle

Up to 10 ft. (3.05 m)



5 GPM (18.9 LPM) - Open Flow


3 Years

0908

V-Jet Fizz Model: Pump Design: Power Source: Materials of Construction: Temperature Limits:


Self Priming: Flow Rate: Max Pressure:

Mounting: Filter: Bypass Setting:

Bypass Temperature:

GPH: Elastometers: Approvals: Warranty:

V100A-400001 Low flow, high pressure positive displacement rotary vane pump head

Clamps on to 48YZ style motor (not supplied); recommended min 250W

Carbon Graphite liner & vanes, Stainless Steel 303/316 metals, PPS (Glass Re-Inforced Polyphenylene Sulphide) pump body, EPDM Elastomers, Carbon/Ceramic rotating seal, Acetyl bypass valve

1 - 85˚C (34 - 185˚F) High temperature model 150˚C (302˚F) available on request

0.6Kg (1.3 lbs)

96.3 x 101.4 x 83.3 up to 2m (79”) 100GPM at 150 psi 17 Bar (250 psi)

Clamp on - 0.19” double flat

Built in 100 mesh, removable for cleaning

Built in, adjustable, pre-set to 11.7 Bar (170 psi)..

standard 125 EPDM CE food grade, NSF 51 2 years limited (non-wearing parts) for beverage applications

V125A-400001 125GPM at 150 psi standard CE food grade, NSF 51

V100A-510001 100GPM at 150 psi standard NSF 61

V125A-510101 125GPM at 150 psi high temperature NSF 61

01Selection Guide

Beverage/Beer Pumps Gas Driven

Beverage / Beer Pumps

Gas (C02)/Air Driven 01

•

The

beer

pum

pin

crea

ses

the

pres

sure

in th

e pr

oduc

t dis

pens

elin

e, w

hich

ens

ures

that

the

inhe

rent

gas

in th

e so

lutio

n (b

eer)

can

not

brea

k ou

t.

•

•

Smal

ler I

.D. t

ubin

gca

n be

use

d in

som

e in

stal

latio

ns, w

hich

redu

ces

the

amou

nt o

f bee

r was

ted

whe

ncl

eani

ng li

nes.

•

•

Feed

ing

up to

thre

e fa

ucet

sth

roug

h a

sing

le li

ne.

•

Capa

ble

of tr

aver

sing

up to

800

feet

, hor

izon

tally

thro

ugh

a si

ngle

line.

Pum

p ca

n al

so b

e ut

ilize

dto

aid

in b

eer l

ine

clea

ning

thro

ugh

wal

lm

ount

ed c

lean

ing

sock

ets.

The

requ

ired

app

lied

keg

pres

sure

need

not

exc

eed

the

natu

ral i

nter

nal

keg

pres

sure

reco

mm

ende

d by

the

brew

er.

This

hel

ps to

con

trol o

ver-

carb

onat

ion,

thus

mai

ntai

ning

qua

lity.

Non

-pre

ssur

ized

clea

ning

bot

tleCO

2Ta

nk

•

Air

com

pres

sors

can

be u

sed

topr

essu

rize

the

beer

pum

ps.

•

Cost

effe

ctiv

e;no

nee

d fo

r mix

edga

ses

or g

as b

lend

ers.

•

•

Can

disp

ense

to m

ultip

le fa

ucet

s(u

p to

4) f

rom

a s

ingl

e ke

g or

keg

serie

s. T

his

will

cut

wal

k-in

coo

ler

clut

ter b

y lo

wer

ing

the

num

ber o

fke

gs o

n ta

p at

one

tim

e w

hich

pr

omot

es p

rodu

ct q

ualit

y/fre

shne

ss.

•

•

The

air/

gas

used

to p

ower

the

pum

p ne

ver c

omes

in c

onta

ctw

ith th

e be

er, t

hus

prov

idin

g pr

otec

tion

from

flat

or t

aint

ed b

eer

due

to im

pure

air

cont

amin

atio

n or

oxi

datio

n.

Capa

ble

of d

eliv

erin

g be

erup

to10

sto

ries,

ver

tical

ly th

roug

h a

sing

le li

ne.

•

Regu

lato

r val

veco

ntro

ls th

e dr

ive

pres

sure

to th

e pu

mp,

whi

ch

prov

ides

a b

asis

by

whi

ch th

e pu

mp

can

be in

finite

ly v

aria

ble

to s

uit a

llru

ns a

nd ri

ses

that

are

like

ly to

be

expe

rienc

ed w

ith d

ispe

nse

lines

.

10 11

01 Beverage/Beer Pumps Gas DrivenINTRODUCTION

Gas (Co2/air) driven pumps are a popular industry method for dispensing from BIBs, kegs and tanks. Flojet produces a range of gas driven pumps suitable for syrups, juices, smoothies, wine and beer.

The Flojet BeerJet series pumps are designed to dispense beer at the brewer specified keg top pressure, through long or short, vertical or horizontal beer runs. The pumps are pneumatically driven by compressed air or bottled gas. By using the BeerJet pumps, the correct equilibrium pressure is maintained on the keg keeping the carbonation level of the beer exactly as the brewer intended it to be served and enjoyed by the customer.

Flojet’s BeerJet pumps are capable of pumping beer up to 240 meters horizontal or 30 meters vertical through a single line. The pump can dispense up to five taps from a single keg and has a service life of more than 250,000 liters.

Flojet also offers two pumps specific to syrup dispense, including the G55 which has industry leading pressure, flow and life. Flojet also produce the G80 PulpJet, specific to applications such as smoothies where particles are present

01Introduction

Beverage/Beer Pumps Gas Driven

*V125 Model

12 13

01 V-Jet Fizz - For Carbonation SystemsMOTOR DRIVEN

For Syrups, Wine and Juice - T5000 Series 01GAS (C02)/AIR DRIVEN

General Information

sPeCifiCations

PumP Design: Positive Displacement, Double Diaphragm

PoWer sourCe: CO2 Gas, Nitrogen or Compressed Filtered Air

materials of ConstruCtion (WetteD Parts):

T5000: Polypropylene, Santoprene®, EPDM, 302 or 304 Stainless Steel Spring

temPerature limits: 34˚ - 120˚ F (1.1˚ - 49˚ C)

Weight: 1.19 lb (0.54 kg)

Dimensions: 5.17” H x 6.18” W x 2.42” D (131.3 mm x 156.8 mm x 61.5 mm)

DisPlaCement: 2.5 oz. per cycle

self Priming: Up to 10 ft. (3.05 m)

oPerating Pressure: 20 psi (1.4 bar) min. / 80 psi (5.5 bar) max.

liquiD inlet Pressure:


floW rate: 4.0 oz. (118.3 ml)/sec. - Open Flow

aPProvals: CE, NSF Standard 18

WarrantY: 5 Years

aPPliCations

Ì Designed for dispensing Bag-in-Box syrups, juice concentrate (without pulp or particulates), teas, wines, and liquor

Ì Supplies the following from remote location: Four (4) 3.0 oz. (89 ml) valves1 or Two (2) 4.5 oz. (133 ml) valves2

1Each valve dispenses syrup at 0.50 oz./sec.2Each valve dispenses syrup at 0.75 oz./sec.

sPeCial features

Ì Service life of 50,000 gallons (150,000 L)

Ì Compact design with quick disconnect fittings for simple, quick installation

Ì Shuts off automatically when bag is empty and restarts when a full bag is connected

Ì High altitude auto shut-off also available

Ì Fully automatic, operates only when beverage is being dispensed

Ì ¼” (6.35 mm) barbed, CO2 exhaust port connection for venting away from confined areas

Ì Maintains constant pressure at the dispensing valve

Ì High suction capability empties syrup down to a minimum residual

Ì Recyclable materials

stanDarD moDel numBers

moDel numBer fitting

ProDuCt inlet gas inlet

T5000-130 Barbed Straight Plastic (Celcon) ³/8” (9.52 mm)

Barbed Straight Plastic (Celcon) ³/8” (9.52 mm)

¼" (6.35 mm) CO2 Inlet Plastic (Celcon)

T5000-140 ³/8” (9.52 mm) ¼" (6.35 mm) Barbed Straight Stainless Steel





T5000-135 Service Pump (Without Auto Shutoff)

None None None

T5000-153 High Altitude Pump or installations above 3000 ft (900 M)




tYPiCal Beverage installations16.00

14.00

12.00

10.00

8.00

6.00

4.00

0.00

2.00

200

250

1450 rpm *1725 rpm

50

0

Pres

sure

(PSI

)

Flow (l/min)

Pres

sure

(Bar

)

150

100

0 2 4 6 8 10

General InformationFlojet’s new V-Jet pump heads are backed with the technology leader in beverage dispense’s 49 years of market experience.

Bringing a novel plastic bodied pump head to market, alongside a fresh look at the main problems experienced with this type of pump, will allow you to experience unrivalled reliability as well as lower lifetime expenditure. Our patented vane venting system replaces traditional technologies, allowing high pressure where needed while reducing vane wear when the supply feed is interrupted.

aPPliCations

Ì Beverage Carbonation, Water Dispensers, Water Boost, Espresso/Coffee Machines, Coolant Recirculation Systems

sPeCial features

Ì Patented vane venting system

Ì High pressure capability

Ì Engineering plastic body allows reduction in SKU’s

Ì Zero brass content

Ì Adjustable bypass – high temperature if needed

Ì 50% of the weight of competitor pumps leading to reduced shipping costs

Ì Cost effective filter solution for recirculation scenarios

Ì Drop – in replacement for existing clamp on rotary vane products

sPeCifiCations

PumP Design: Low flow, high pressure positive displacement rotary vane pump head

PoWer sourCe: Clamps on to 48YZ style motor (not supplied); recommended min 250W

materials of ConstruCtion


temPerature limits: 1 - 85˚C (34 - 185˚F) High temperature model 150˚C (302˚F) available on request

Weight: 0.6Kg (1.3 lbs)

self Priming (Wet): up to 2m (79”)

max Pressure: 17 Bar (250 psi)

floW rate*: @ 1725 rpm - 7.2 l/min @ 10.3 Bar / 114 GPH @ 150 psi @ 1450 rpm - 5.9 l/min @ 10.3 Bar / 93.5 GPH @ 150 psi

WarrantY: 2 years limited (non-wearing parts)

mounting: Clamp on - 0.19” double flat

filter: Built in 100 mesh, removable for cleaning V125A - 401001 - No

BYPass setting: Built in, adjustable, pre-set to 11.7 Bar (170 psi). V125A - 401001 - 100

gPh 125

elastometers: EPDM


Part numBers BYPass temPerature aPProvals

V100A-400001 standard CE food grade, NSF 51


V100A-510001 standard NSF 61

V125A-510101 high temperature NSF 61

01Introduction

An Introduction to Pumps

General Information

sPeCifiCations


PoWer sourCe: CO2 Gas, Nitrogen or Compressed Dry Filtered Air










30 PSI (2.1 bar) (2.1 bar) max.


aPProvals: CE, SK, NSF Standard 18

WarrantY: 5 Years

aPPliCations

Ì Designed for dispensing Bag-in-Box syrups, juice concentrate (without pulp or particulates), teas, wines, and liquor

Ì Supplies the following from remote location: Four (4) 3.0 oz. (89 ml) valves1 or Two (2) 4.5 oz. (133 ml) valves2

1Each valve dispenses syrup at 0.50 oz./sec.2Each valve dispenses syrup at 0.75 oz./sec.

sPeCial features

Ì Service life of 100,000 gallons (378,541 L)

Ì Highest flow rate available

Ì High CO2 inlet pressure capability for long runs - up to 90 psi (6.2 bar)

Ì Ultimate performance and reliability with extended service life

Ì Easy installation with all quick disconnect ports

Ì Built-in auto shutoff, automatically shuts off pump when bag is empty and restarts when a full bag is connected

Ì Recyclable materials

Ì High altitude shutoff also available

Ì Quiet operation



ProDuCt outlet fitting gas inlet


³/8” (9.52 mm)Barbed Straight Stainless Steel



¼” (6.35 mm)Barbed Straight Stainless Steel


tYPiCal Beverage installations

01 For Syrups including HFCS - G55 Series For Juice Concentrates and Condiments - G58 Series 01GAS (C02)/AIR DRIVEN

General Information

sPeCifiCations












30 PSI (2.1 bar) (2.1 bar) max.



WarrantY: 3 Years

aPPliCations

Ì Designed for dispensing BIB syrups, juice concentrates and condiments that have particulates but no pulp

sPeCial features

Ì Enlarged diameter check valves, capable of passing particulate easily

Ì Highest flow rate available

Ì High CO2 inlet pressure capability for long runs - up to 90 psi (6.2 bar)

Ì Ultimate performance and reliability with extended service life


Ì Quiet operation


Ì High altitude shut-off also available








14 15

GAS (C02)/AIR DRIVEN

01Gas (C02)/Air Driven

Beverage/Beer Pumps

General Information

sPeCifiCations


PoWer sourCe: CO2, Nitrogen or Compressed Dry Filtered Air





Dimensions: 5.27" H x 3.21" W x 4.58" D (133.8 mm x 81.5 mm x 116.3 mm)

DisPlaCement: 3.2 oz. (91 ml) per cycle




30 PSI (2.1 bar) (2.1 bar) max.

floW rate: 5 GPM (18.9 LPM) - Open Flow


life / mean time: 70,000 gallons (265,000 liters)

WarrantY: 3 Years

aPPliCations

Ì Dispense beer from a keg, cask or brew kettle

Ì Both long or short draw systems

sPeCial features

Ì Air compressors can be used to pressurize the beer pumps

Ì Cost effective; no need for mixed gases or gas blenders

Ì The beer pump increases the pressure in the pro duct dispense line, which ensures that the inherent gas in the solution (beer) cannot break out

Ì Smaller I.D. tubing can be used in some installations, which reduces the amount of beer wasted when cleaning lines

Ì The air/gas used to power the pump never comes in contact with the beer, thus providing protection from flat or tainted beer due to impure air contamination or oxidation

Ì Capable of traversing up to 800 feet (244 m), horizontally through a single line

Ì Capable of delivering beer up to 10 stories (30 m), vertically through a single line

Ì Pump can also be utilized to aid in beer line cleaning through wall mounted cleaning sockets

Ì Infinitely variable to suit all runs and rises

Ì Can dispense to multiple faucets (up to 5) from a single keg or keg series. This will cut walk-in cooler clutter by lowering the number of kegs on tap at one time which promotes product quality/freshness

Ì Feeds up to three faucets through a single line




G56-1202 10 - 13 mm (³/8”-½") Barbed Straight Plastic (Polypropylene)

10 - 13 mm (³/8”-½”) Barbed Straight Plastic (Polypropylene)


G56-1162 10 - 13 mm (³/8”-½") Barbed Straight Plastic

10 - 13 mm (³/8”-½") Barbed Elbow Plastic



® A registered trademark of Monsanto Co.

Flow Reversal Valve (see accessories section)

01 G56 Beerjet

General Information

sPeCifiCations












30 PSI (2.1 bar) (2.1 bar) max.


aPProvals: NSF listed, CE

WarrantY: 3 Years

aPPliCations

Ì Designed for dispensing BIB syrups, for juice concentrates and condiments which have pulp, and particles (up to ¹/8” or 3 mm)

sPeCial features

Ì Patented enlarged diameter check valves, capable of passing pulp and particles easily

Ì Highest flow rate available. Capable of CO2 inlet pressures up to 80 psi (5.5 bar)

Ì Ultimate performance and reliability with the patented shuttle valve


Ì Quiet operation with exhaust muffler






³/8” (9.52 mm)Barbed Straight Stainless Steel

¼” (6.35 mm)CO2 Shutoff Brass



G80 PulpJet - For Commercial Smoothie Dispensing 01

16 17


01Gas (C02)/Air Driven


1918

Selection Guide

Introduction

V-Jet Cool

HPR Series

VM Series

GP Series

SPC Series

Beer/Soda Chilling Pumps - Centrifugal and Rotary Vane 02

Market Leader. Flojet products in service for 36 years



HPR Series Model: Voltage: Port Details: Dimensions:(height x width x depth)

Weight: Fluid Temperature:

Max Body Pressure: Flow Rate:(l/min)

Pump Design: Materials of Construction (wetted parts):

Limits: Approvals:

HPR 6/8 230V 1Ph 50/60Hz ½” (12.5mm) or 15mm OD ³/8” Push Fit

3.86" x 6.95" x 4.45" (98 mm x 176.5 mm x 113 mm)

5.51 lb (2.5 kg) -4˚F to +185˚ F (-20˚C to +85˚ C)

145 psi (10 bar) max 5.5 LPM - Open Flow Magnetically Coupled Regenerative Pump

PPS, LCP, EPDM & Ceramic - CE, UL


3.86" x 6.95" x 4.45" (98 mm x 176.5 mm x 113 mm)

5.51 lb (2.5 kg) -4˚F to +185˚ F (-20˚C to +85˚ C)

145 psi (10 bar) max 5.5 LPM- Open Flow Magnetically Coupled Regenerative Pump



3.86" x 6.95" x 4.45" (98 mm x 176.5 mm x 113 mm)

5.51 lb (2.5 kg) -4˚F to +185˚ F (-20˚C to +85˚ C)

145 psi (10 bar) max 5.5 LPM - Open Flow Magnetically Coupled Regenerative Pump



3.86" x 6.95" x 4.45" (98 mm x 176.5 mm x 113 mm)

5.51 lb (2.5 kg) -4˚F to +185˚ F (-20˚C to +85˚ C)

145 psi (10 bar) max 5.5 LPM- Open Flow Magnetically Coupled Regenerative Pump


HPR & GPR 10/15 230V 1Ph 50/60Hz ½” (12.5mm) or 15mm OD 3.86" x 6.95" x 4.45" (98 mm x 176.5 mm x 113 mm)

6.8 lb (3.1 kg) -4˚F to +185˚ F (-20˚C to +85˚ C)

87 psi (6 bar) 10 LPM- Open Flow Magnetically Coupled Regenerative Pump


HPR & GPR 10/15 110V 1Ph 50/60Hz ½” (12.5mm) or 15mm OD 3.86" x 6.95" x 4.45" (98 mm x 176.5 mm x 113 mm)

6.8 lb (3.1 kg) -4˚F to +185˚ F (-20˚C to +85˚ C)

87 psi (6 bar) 10 LPM- Open Flow Magnetically Coupled Regenerative Pump


VM Series Model: Voltage: Port Details: Dimensions: (height x width x depth)


Max Body Pressure: Flow Rate: Pump Design: Materials of Construction (wetted parts):

Limits: Approvals:

VM8/2 230V 1Ph 50Hz Plain 13mm or ¼” bsp Male

3.62" x 4.72" x 2.87" (92 mm x 120 mm x 73 mm)

1.8 lb (0.8kg) -4˚F to +185˚ F (-20˚C to +85˚ C)

20.3 psi (1.4 bar) max 2.1 GPM (8 LPM) - Open Flow Magnetically Coupled Centrifugal Pump

Polypropylene, Nitrile or Silicone

- CE

VM12/2 110V or 230V 1Ph 50/60Hz

Plain 13mm or ¼” bsp Male 3.62" x 4.72" x 2.87" (92 mm x 120 mm x 73 mm)

2.4 lb (1.1kg) -4˚F to +185˚ F (-20˚C to +85˚ C)



- CE

VM25/2 110V or 230V 1Ph 50/60Hz

Plain 21mm or ½” bsp Male 3.62" x 4.72" x 2.87" (92 mm x 120 mm x 73 mm)

3.5 lb (1.6 kg) -4˚F to +185˚ F (-20˚C to +85˚ C)



- CE

VM35/3 110V or 230V 1Ph 50/60Hz

Plain 21mm or ½” bsp Male 3.62" x 4.72" x 2.87" (92 mm x 120 mm x 73 mm)

3.5 lb (1.6 kg) -4˚F to +185˚ F (-20˚C to +85˚ C)



- CE

GP Series Model: Voltage: Port Details: Dimensions: (height x width x depth)

Weight: Temp Range: Max Body Pressure: Run-out Flow Rate: Motor Output: Closed Valve head: Max Specific Gravity*: Approvals:

GP20/12 230V 1Ph 50Hz Plain 15 mm, ³/8” npt, ³/8” bsp Male

5.6" x 8.6" x 4.6" (143 mm x 218 mm x 116 mm)

6.6 lb (3.0 kg) -4ºF to +185ºF (-20º C to +85º C)

36.3 psi (2.5 bar) 4.6 GPM (17.4 LPM) 60 watts 41.6' (12.7 m) 1.2 CE, UL


5.6" x 8.6" x 4.6" (143 mm x 218 mm x 116 mm)


36.3 psi (2.5 bar) 4.6 GPM (17.4 LPM) 60 watts 41.6' (12.7 m) 1.2 CE, UL


5.6" x 10.1" x 4.6" (143 mm x 259 mm x 116 mm)


36.3 psi (2.5 bar) 4.8 GPM (18.5 LPM) 90 watts 59.0' (18 m) 1.2 CE, UL


5.6" x 10.1" x 4.6" (143 mm x 259 mm x 116 mm)


36.3 psi (2.5 bar) 4.8 GPM (18.5 LPM) 90 watts 59.0' (18 m) 1.2 CE, UL


5.6” x 11.0” x 4.6” (143 mm x 280 mm x 116 mm)


36.3 psi (2.5 bar) 4.6 GPM (17.5 LPM) 110 watts 72.2’ (22 m) 1.2 CE, UL

GP28/11 Series

Model: Voltage: Port Details: Dimensions: (height x width x depth)

Weight: Temp Range (C): Max Body Pressure: Run-out Flow Rate: Motor Output: Closed Valve head: Max Specific Gravity*: Approvals:

GP28/11 230V 1Ph 50Hz Plain 15 mm 6.2" x 10.4" x 5.2" (158 mm x 264 mm x 132 mm)

7.1lb (3.2 kg) -4ºF to +185ºF (-20º C to +85º C)

20.3 psi (1.4 bar) 7.6 GPM (29 LPM) 60 watts 36.1 ft (11 m) 1 CE

GP28/11 230V 1Ph 60Hz Plain 15 mm 6.2" x 10.4" x 5.2" (158 mm x 264 mm x 132 mm)

7.1lb (3.2 kg) -4ºF to +185ºF (-20º C to +85º C)

20.3 psi (1.4 bar) 7.6 GPM (29 LPM) 60 watts 36.1 ft (11 m) 1 CE

V-Jet Cool Model: Pump Design: Power Source: Materials of Construction: Temperature Limits:




Bypass Temperature:


V100C-401001 Low flow, high pressure positive displacement rotary vane pump head


Carbon Graphite liner & vanes, Stainless Steel 303/316 metals, PPS (Glass Re-Inforced Polyphenylene Sulphide) pump body, EPDM Elastomers, Carbon/Ceramic rotating seal,


0.6Kg (1.3 lbs)




Built in, adjustable, pre-set to 11.7 Bar (170 psi).


V125C-401001 125GPM at 100 psi

20 21

02 Beer / Soda Chilling Pumps - Centrifugal and Rotary VaneSELECTION GUIDE

02Selection Guide

Beer/Soda Chilling Pumps



GP50/25 Series

Model: Voltage: Port Details: Dimensions:(height x length x width)

Weight: Temp Range: Operating Pressure:

Flow Rate: Pump Design: Motor Output: Approvals: Closed Valve head :

GP50/25 230V 1Ph 50Hz Plain 1.1 in (28 mm) 8.1" x 17.4" x 6.3" (206 mm x 443 mm x 159 mm)

22.3 lb (10.1 kg) -4˚ to +185˚ F (-20˚ to +85˚ C)

30 PSI (2.1 bar) (2.0 bar) max.

16.25 GPM (61.5 LPM) - Open Flow Magnetically Coupled Centrifugal Pump 550 watts CE 31.5 m

GP50/25 415V 3Ph 50Hz Plain 1.1 in (28 mm) 8.1" x 17.4" x 6.3" (206 mm x 443 mm x 159 mm)

22.3 lb (10.1 kg) -4˚ to +185˚ F (-20˚ to +85˚ C)

30 PSI (2.1 bar) (2.0 bar) max.

16.25 GPM (61.5 LPM) - Open Flow Magnetically Coupled Centrifugal Pump 550 watts CE 31.5 m

SPC8/2 Series

Model: Voltage: Port Details: Dimensions:(height x length)


Operating Pressure:

Flow Rate: Pump Design: Materials of Construction (wetted parts):

Motor Output: Limits: Approvals:

SPC 8/2 110 or 230V 50/60Hz

Plain 0.47 in (12 mm)

6.85” x 8.82” (174 mm x 224 mm)

2.2 lb (1 kg) -4˚ to +185˚ F (-20˚ to +85˚ C)

0.2 bar (3 psi)max.

50Hz- 2.25 GPM (8.5 LPM) or 60Hz - 2.06 GPM (7.8 LPM)- run out

Semi-Submersible Column Pump

SS mounting plate, TPE impellers, ABS column & pump body, SS Shaft, Nylon Agitator

10 watts - CE, UL

SPC12/4 Series

Model: Voltage: Port Details: Dimensions:(height x length x width)


Operating Pressure:



SPC 12/4 110 or 230V 50/60Hz

Plain 0.51 (13 mm)

3.1" x 8.5" x 4.3" (80.3 mm x 216.3 mm x 109 mm)

3.0 lb (1.4kg) -4˚ to +185˚ F (-20˚ to +85˚ C)

5.3 psi (0.4 bar) max.

3.4 GPM (13 LPM) - Open Flow Semi-Submersible Column Pump

SS mounting plate ABS/PP/Nylon column & pump body SS Shaft Nylon Agitator

10 watts - CE, UL

SPC51 Series



Operating Pressure:



SPC 51 110V or 230V 50/60Hz

½” (12.5mm) and 11mm

5.27" x 3.21" (107 mm x 289 mm)

4.4 lb (2 kg) -4˚ to +185˚ F (-20˚ to +85˚ C)

50 Hz - 9.6 psi (0.6 bar) max., 60 Hz - 11.5 psi (0.8 bar) max.

50HZ - 4.25 GPM (16.1 LPM) or 50HZ - 4 GPM (15.3 LPM) - Open flow


Nylon mounting plate 30 watts - CE, UL

SPC42 Series



Operating Pressure:



SPC 42 110 or 230V 50/60Hz

½” (12.5mm) and 11mm

4.61” x 12.56” (117 mm x 319 mm)

5.5 lb (2.5 kg) -4˚ to +185˚ F (-20˚ to +85˚ C)

50 Hz - 18 psi (1.2 bar) max., 60 Hz - 23 psi (1.5 bar) max.

Up to 3.75GPM (14.2 LPM) @ 50Hz or 4.12 GPM (15.6 LPM) @ 60Hz



SPC43 Series



Operating Pressure:



SPC 43 110 or 230V 50/60Hz

½” (12.5mm) and 11mm

5.39” x 14.17” (137 mm x 360 mm)

7.0 lb (3.2 kg) -4˚ to +185˚ F (-20˚ to +85˚ C)

50 Hz - 27 psi (1.8 bar) max. 60 Hz - 36 psi (2.4bar) max.

Up to 4.25GPM (16.1LPM) @ 50Hz or 4.57 GPM (17.3 LPM) @ 60Hz



SPC44 Series



Operating Pressure:



SPC 44 110 or 230V 50/60Hz

½” (12.5mm) and 11mm

5.39” x 14.7” (137 mm x 360 mm)

7.50 lb (3.4 kg) -4˚ to +185˚ F (-20˚ to +85˚ C)

50Hz - 33 psi (2.2 bar)

Up to 4.23GPM (16 LPM) Semi-Submersible Column Pump


SPC18 Series



Operating Pressure:



SPC 18 230V 50/60Hz ½” (12.5mm) and 11mm

5.76” x 14.9” (146.5 mm x 378.5 mm)

8.2 lb (3.7kg) -4˚ - 185˚ F (-20˚ - 85˚ C)

27psi (1.8bar)max. 50Hz- 4.8 GPM (18 LPM) - Run out Flow



22 23

02 Beer / Soda Chilling Pumps - Centrifugal and Rotary Vane SELECTION GUIDE

02Selection Guide


For Coolant Recirculation - V-Jet Cool 02



aPPliCations


sPeCial features









sPeCifiCations












filter: Built in 100 mesh, removable for cleaning

BYPass setting: Built in, adjustable, pre-set to 11.7 Bar (170 psi).

gPh 125

elastometers: EPDM



V100C-401001 standard CE food grade, NSF 51


*V125 Model

24 25

02 Beer / Soda Chilling Pumps - Centrifugal and Rotary INTRODUCTION

Xylem Flojet manufacture a range of magnetically coupled and semi-submersible pumps for recirculating chilled water or water/glycol in beer coolers and carbonated water in soft drinks coolers. Producing heads up to 24m, we have a pump for all applications.

Xylem Flojet, a brand of Xylem Inc., design and manufacture magnetically coupled and semi-submersible pumps in a wide range of materials and configurations for beer cooling and soda recirculation. Our pumps are engineered for long life and trouble-free performance. With magnetic couplings and semi-submersible designs they are ideal for many beverage applications including beverage dispense and factory process systems.

Xylem Flojet has manufacturing facilities in England and China and has global direct sales and distribution coverage. Xylem pump facilities are integrated with Six Sigma practices and employ best-in-class engineering capabilities. In the following pages, you will find a selection of our standard products. If your application requires customization, please contact your direct sales representative or our factory.

Centrifugal and Rotary Vane

Beer/Soda Chilling Pumps 02

General Information

aPPliCations

Ì Hot and cold drinks vending machines, where the seal-less design ensures the purity of vended liquid, preventing contaminants introducing bacteria or taste taint

sPeCial features

Ì Low power consumption

Ì Variable mounting foot positions

Ì Customer choice of plug & lead length

Ì Designed for a minimum 5 years normal operation


series voltage Port Details siZe Weight floW

VM8/2 230V 1Ph 50Hz Plain 13mm or ¼” bsp Male 3.62" x 4.72" x 2.87" (92 mm x 120 mm x 73 mm)

1.8 lb (0.8kg) 2.1 GPM (8 LPM) - Open Flow

VM12/2 110V or 230V 1Ph 50/60Hz Plain 13mm or ¼” bsp Male 3.62" x 4.72" x 2.87" (92 mm x 120 mm x 73 mm)

2.4 lb (1.1kg) 3.2 GPM (13 LPM) - Open Flow

VM25/2 110V or 230V 1Ph 50/60Hz Plain 21mm or ½” bsp Male 3.62" x 4.72" x 2.87" (92 mm x 120 mm x 73 mm)

3.5 lb (1.6 kg) 6.5 GPM (25 LPM) - Open Flow

VM35/3 110V or 230V 1Ph 50/60Hz Plain 21mm or ½” bsp Male 3.62" x 4.72" x 2.87" (92 mm x 120 mm x 73 mm)

3.5 lb (1.6 kg) 9.2 GPM (35 LPM) - Open Flow

Consult your local Xylem representative for specific model number configurations.

sPeCifiCations

PumP Design: Magnetically Coupled Centrifugal



fluiD temPerature limits:

-4˚ - 185˚ F (-20˚ - 85˚ C)


Dimensions: 3.62" H x 4.72" L x 2.87" W (92 mm x 120 mm x 73 mm)

oPerating Pressure: 20.3 psi (1.4 bar) max

floW rate: Up to 9.2GPM (35LPM)

aPProvals: CE

New

00

60Hz

50Hz

39.36(1)

59.04(1.5)

19.68(.5)

78.72(2)

98.40(2.5)

1.32(5)

.26(1)

.52(2)

.79(3)

1.06(4)

159(6)

1.85(7)

2.11(8)

2.37(9)

2.64(10)

Flow GPM (LPM)

Pre

ssu

re/H

ead

psi

(b

ar)

BEER/SODA CHILLING PUMPS - CENTRIFUGAL AND ROTARY VANE

VM Series 0202 HPR SeriesBEER/SODA CHILLING PUMPS - CENTRIFUGAL AND ROTARY VANE

General Information

aPPliCations

Ì Continuous recirculation of carbonated water, aggressive chemicals, chilled water, pure or precious liquids in high pressure systems

sPeCial features

Ì Manufactured from food grade thermoplastics

Ì Magnetic coupling provides an energy efficient thermal shield, minimizing heat transfer to the pumped fluid

Ì Temperature stability and product purity ensured

Ì Leak free continuous operation

Ì Low condensation

Ì Nitrile ‘O’ rings standard. Other materials available

Ì Zero maintenance

Ì PPS pump head

Ì Long life


series voltage Port Details

HPR 6/8 230V 1Ph 50/60Hz ½” (12.5mm) or 15mm OD, ³/8” Push Fit



HPR 6/11 110V 1Ph 50/60Hz ½” (12.5mm) or 15mm OD. ³/8” Push Fit

HPR & GPR 10/15 230V 1Ph 50/60Hz ½” (12.5mm) or 15mm OD


sPeCifiCations

PumP Design: Magnetically Coupled Regenerative Pump


PPS, LCP, Stainless Steel and EPDM


-4˚ - 185˚ F (-20˚ - 85˚ C)

Weight: 5.51 lb (2.5 kg) HPR & GPR 10/15 : 6.8 lb (3.1 kg)

Dimensions: 3.86" H x 6.95" W x 4.45" D (98 mm x 176.5 mm x 113 mm)

oPerating Pressure: HPR6/8 and HPR6/11: 145psi (10bar) , GPR an d HPR10/15: 87 psi (6 bar)

floW rate: HPR6/8: 1.4GPM( 5.5 LPM) HPR6/11: 1.6 GPM (6.2 LPM) @ 50Hz or 1.9 GPM (7.3 LPM) @60Hz GPR and HPR10/15: 2.9 GPM (10.1 LPM) @ 50Hz or 3.0 GPM (11.5 LPM) @ 60Hz

aPProvals: CE, UL

00

60Hz

50Hz

78.72(2)

157.44(4)

315(6)

236.28(8)

393.72(10)

472.44(12)

1.32(5)

.26(1)

.52(2)

.79(3)

1.06(4)

159(6)

1.85(7)

2.11(8)

Pre

ssu

re/H

ead

psi

(b

ar)

Flow in GPM (LPM)

New

26 27

02Centrifugal and Rotary Vane



GP28/11 Series 02

General Information

aPPliCations

Ì Specifically developed for applications requiring cost effective, continuous low flow for the transfer and recirculation of water and glycol solutions

WetteD materials

Ì Brass spindle – ceramic optional

Ì Nitrile ‘O’ ring standard, other materials available

Ì StFe ceramic magnet

Ì PP pump housing

Ì PPS spindle housing

Ì Alumina ceramic thrust washer

sPeCial features

Ì Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids

Ì Variable pump body orientation

Ì Adaptable mounting foot positions

Ì Compatible with standard fittings

Ì IPX5 motor enclosure

Ì Deep groove ball bearings



GP28/11 230V 1Ph 50Hz Plain 15 mm

GP28/11 230V 1Ph 60Hz Plain 15mm


sPeCifiCations

overall height 6.2 in (158mm)

overall length 10.4 in (264 mm)

overall WiDth 5.2 in (132 mm)

Weight 7.1lb (3.2 kg)

max BoDY Pressure 20.3 psi (1.4 bar)

run-out floW rate 7.6 GPM (29 LPM)

CloseD valve heaD 36.1 ft (11 m)

temP range (C) -4ºF to +185ºF (-20º C to +85º C)

max sPeCifiC gravitY* 1.0

motor outPut 60 watts

New

HEAT DUMP

24 VOLTSAC SUPPLY

FROM VISION3 BASE UNIT

PRO

DU

CT O

UT

PRODUCTS IN

PRODUCTKEGS

WATER/GLYCOLRECIRCULATION LINES10mm 10x15mm ODTUBING “COBRACOL”RECOMMENDED


52.5(16)

39.4(12)

26.2(8)

13.1(4)

00 2.6

(10)5.3(20)

7.9(30)

Flow GPM (LPM)

Hea

d f

eet

(met

ers)

02 GP SeriesBEER/SODA CHILLING PUMPS - CENTRIFUGAL AND ROTARY VANE

General Information

aPPliCations

Ì Specifically developed for applications requiring cost effective high head, continuous low flow for the transfer and recirculation of water and glycol solutions

WetteD materials

Ì Ceramic spindle

Ì Nitrile ‘O’ ring

Ì PP/PPS pump housing

Ì Alumina ceramic graflon loaded PTFE thrust washers

sPeCial features



Ì Adaptable mounting foot positions

Ì Compatible with standard fittings

Ì IPX5 motor enclosure

Ì Deep groove ball bearings



GP20/12 230V 1Ph 50Hz Plain 15 mm, ³/8” npt, or ³/8” bsp Male






sPeCifiCations

moDel GP20/12 GP20/18

overall height 5.6 in (143 mm) 5.6 in (143 mm)

overall length 8.6 in (218 mm) 10.1 in (259 mm)

overall WiDth 4.6 in (116 mm) 4.6 in (116 mm)

Weight 6.6 lb (3.0 kg) 8.5 lb (3.9 kg)

max BoDY Pressure 36.3 psi (2.5 bar) 36.3 psi (2.5 bar)

run-out floW rate 4.6 GPM (17.4 LPM) 4.8 GPM (18.5 LPM)

CloseD valve heaD 41.6' (12.7 m) 59.0' (18 m)

temP range -4ºF to +185ºF (-20º C to +85º C)

-4ºF to +185ºF (-20º C to +85º C)

max sPeCifiC gravitY*

1.2 1.2

motor outPut 60 watts 90 watts


New

HEAT DUMP

24 VOLTSAC SUPPLY


PRO

DU

CT O

UT

PRODUCTS IN

PRODUCTKEGS


01.06(4)

0 2.11(8)

2.11(12)

2.11(16)

2.11(20)

52.5(16)

65.6(16)

39.4(12)

26.2(8)

13.1(4)

Flow GPM (LPM)

Hea

d f

eet

(met

ers)

GP20/12

GP20/18

28 29



SPC12/4 Series

General Information General Information

aPPliCations

Ì Designed for continuous operation in, chillers, coolers, vending and general water applications

Ì Ideal for shelf coolers

aPPliCations


sPeCial features

Ì Up to 2.1 GPM (8 LPM), and up to 6.5 ft (2 m) head

Ì Low maintenance and long life

Ì Available with plugs and leads to suit application

Ì Agitator propeller fitted as standard

sPeCial features

Ì Up to 3.4 GPM (13 LPM)

Ì Up to 11.1 ft (3.4 m) head






SPC 8/2 110 or 230V 50/60Hz Plain 0.47 in (12 mm)



SPC 12/4 110 or 230V 50/60Hz Plain 0.51 (13 mm)



sPeCifiCations

PumP Design: Semi-Submersible Column Pump


SS mounting plate TPE impellers ABS column & pump body SS Shaft Nylon Agitator


-4˚ - 185˚ F (-20˚ - 85˚ C)



Dimensions: 6.85” H x 8.82” L (174 mm x 224 mm)

CloseD valve heaD: 0.2 bar (3 psi)max.

floW rate: 50Hz- 2.25 GPM (8.5 LPM) or 60Hz - 2.06 GPM (7.8 LPM)- run out

aPProvals: CE, UL

sPeCifiCations



SS mounting plate ABS/PP/Nylon column & pump body SS Shaft Nylon Agitator


-4˚ - 185˚ F (-20˚ - 85˚ C)

Weight: 3.0 lb (1.4kg)

Dimensions: 3.1" H x 8.5" L x 4.3" W (80.3 mm x 216.3 mm x 109 mm)

CloseD valve heaD: 5.3 psi (0.4 bar) max.


floW rate: 3.4 GPM (13 LPM) - Open Flow

aPProvals: CE, UL

NewNew


SPC8/2 Series02 GP50/25 SeriesBEER/SODA CHILLING PUMPS - CENTRIFUGAL AND ROTARY VANE

General Information

aPPliCations

Ì Specifically developed for applications requiring cost effective high head, continuous medium flow for the transfer and recirculation of water and glycol solutions

WetteD materials

Ì Ceramic spindle

Ì Nitrile ‘O’ ring

Ì PP/PPS pump housing

Ì Alumina ceramic/graflon loaded PTFE thrust washer

sPeCial features



Ì Compatible with standard pushfit fittings

Ì IP55 standard motor housing



GP50/25 230V 1Ph 50Hz Plain 1.1 in (28 mm)

GP50/25 415V 3Ph 50Hz Plain 1.1 in (28 mm)


sPeCifiCations

PumP Design: Magnetically Coupled Centrifugal Pump

temPerature range: -4˚ - 185˚ F (-20˚ - 85˚ C)


Dimensions: 8.1" H x 17.4" L x 6.3" W (206 mm x 443 mm x 159 mm)

floW rate: 16.25 GPM (61.5 LPM) - Open Flow

CloseD valve heaD: 31.5 m

motor outPut: 550 watts

aPProvals: CE


New

HEAT DUMP

24 VOLTSAC SUPPLY


PRO

DU

CT O

UT

PRODUCTS IN

PRODUCTKEGS


02.6(10)

0 5.3(20)

7.9(30)

10.6(40)

13.2(50)

15.9(60)

18.5(70)

65.6(20)

82.0(25)

98.4(30)

114.8(35)

50 Hz

49.2(15)

32.8(10)

16.4(5)

Flow GPM (LPM)

Hea

d f

eet

(met

ers)

30 31




aPPliCations


Ì Ideal for shelf coolers

aPPliCations


sPeCial features

Ì Up to 4.25GPM (16.1LPM) @ 50Hz or 4.57 GPM (17.3 LPM) @ 60Hz




sPeCial features

Ì Up to 4.23GPM (16 LPM)

Ì Up to 72.2 ft (22m)






SPC43 110 or 230V 50/60Hz ½” (12.5mm) and 11mm






sPeCifiCations



PP mounting plate PP impellers ABS column & pump body SS Shaft Nylon Agitator


-4˚ - 185˚ F (-20˚ - 85˚ C)






aPProvals: CE, UL

sPeCifiCations



PP mounting plate ABS/PP/Nylon column & pump body SS Shaft Nylon Agitator PP impellers


-4˚ - 185˚ F (-20˚ - 85˚ C)



CloseD valve heaD: 2.2 bar (32 psi) max.



aPProvals: CE, UL

New New

SPC43 Series SPC44 SeriesBEER/SODA CHILLING PUMPS - CENTRIFUGAL AND ROTARY VANE

SPC42 Series


aPPliCations


aPPliCations


sPeCial features

Ì Up to 4.17 GPM (15.8 LPM)

Ì Up to 19.7 ft (6 m) head




Ì Top mounted with keyhole mounting plate

Ì IPX4 motor housing

sPeCial features

Ì Up to 3.75GPM (14.2 LPM) @ 50Hz or 4.12 GPM (15.6 LPM) @ 60Hz

Ì 39.7 ft (12.1m) @ 50Hz or 49.5 ft (15.4m) @ 60Hz











sPeCifiCations



PP mounting plate PP impellers ABS column & pump body SS Shaft Nylon Agitator


-4˚ - 185˚ F (-20˚ - 85˚ C)






aPProvals: CE, UL

sPeCifiCations



PP mounting plate ABS/PP/Nylon column & pump body SS Shaft, PP impellers Nylon Agitator


-4˚ - 185˚ F (-20˚ - 85˚ C)



CloseD valve heaD: 1.2 bar (17.5 psi) max.



aPProvals: CE, UL

NewNew

02 SPC51 Series

32 33




General Information

aPPliCations


sPeCial features

Ì Up to 4.75 GPM (18.0 LPM)

Ì Designed for simplified remanufacture

Ì 0.47 (12mm) motor shaft and drive end bearing for long life

Ì Flatted pump shaft for positive impeller drive & ease of maintenance

Ì Fitted with Liquid Ingress Prevention System (LIPS)

Ì Top mounted with Universal mounting plate

Ì IPX5 motor housing

Ì Three stage pump head – Fitted with 3 blade agitator



SPC18 230V 50/60Hz ½” (12.5mm) and 11mm


sPeCifiCations



PP mounting plate Glass filled ABS column and pump body PP impellers SS Shaft Nylon Agitator


-4˚ - 185˚ F (-20˚ - 85˚ C)


Dimensions: 5.76” H x 14.9” L (146.5 mm x 378.5 mm)



floW rate: 50Hz- 4.8 GPM (18 LPM) - Run out Flow

aPProvals: CE, UL

02 SPC18 Series

New

34 35




Selection Guide

Introduction

V-Jet Espress

Dual Inlet Bottled Water Systems

BevJet Compact

100 Series

300 Series

900 Series

2000 Series

Solenoid Valve Technical Data

Coffee & Tea Pumps/Systems 03

3736

Flojet’s robust electric diaphragm pump design, proven with over 7 million units in service - Flojet Brand

38 39

V-Jet Espress Model: Pump Design: Power Source: Materials of Construction: Temperature Limits:




Bypass Temperature:


V100A-400001 Low flow, high pressure positive displacement rotary vane pump head




0.6Kg (1.3 lbs)




Built in, adjustable, pre-set to 11.7 Bar (170 psi)..


V125A-400001 125GPM at 150 psi standard CE food grade, NSF 51

V100A-510001 100GPM at 150 psi standard NSF 61

V125A-510101 125GPM at 150 psi high temperature NSF 61

V100C-401001 100GPM at 100 psi standard CE food grade, NSF 51

03 Coffee & Tea Pumps/SystemsSELECTION GUIDE

Bottled Water Plus Dual Inlet

Model: Pump Design: Dimensions:(Height x Width x Depth)

VAC: Plug:

BW4020-000A Designed for dispensing bottled water to coffee machines, beverage dispensers, vending machines and carts 20’ (6.1m) 0.250” (6.35mm) OD discharge hose included 115 VAC US Plug

BW4022-000A Designed for dispensing bottled water to coffee machines, beverage dispensers, vending machines and carts 20’ (6.1m) 0.250” (6.35mm) OD discharge hose included 230 VAC AUS Plug

BW4023-000A Designed for dispensing bottled water to coffee machines, beverage dispensers, vending machines and carts 20’ (6.1m) 0.250” (6.35mm) OD discharge hose included 230 VAC UK Plug

BW4024-000A Designed for dispensing bottled water to coffee machines, beverage dispensers, vending machines and carts 20’ (6.1m) 0.250” (6.35mm) OD discharge hose included 230 VAC SHUKO Plug

PN# 21000633A Dual inlet suction kits (convert single inlet to dual inlet)

PN# 21000596C Auxiliary suction tube (no float) replacement kit

BevJet Compact

Model: Pump Design: Liquid Temperature:

Net Weight:

Dimensions:(Height x Width x Length)

Flow Rate: Ports: Amp Draw: Pressure: VAC: Plug: Elastometers: Approvals:

BLC1011-000A Positive displacement double diaphragm - base pump

Min 34ºF (1.1ºC) / Max 120ºF (49ºC)

1lb (632gr.)

2.67” (67.9 mm) x 4.06“ (103.1mm) x 7.76” (197.2 mm)

1.0 GPM (3.8 LPM) Max T5000 style quick connect 2.5 amp at 25 PSI (1.7 bar) 40 PSI (2.8 bar) Max 115 VAC US PLUG EPDM & Santoprene® NSF, CE, UL, RoHS

BLC2011-000A 230 VAC UK PLUG EPDM & Santoprene® NSF, CE, UL, RoHS

BLC3011-000A 230 VAC EU PLUG EPDM & Santoprene® NSF, CE, UL, RoHS

BLC4011-000A 230 VAC AU PLUG EPDM & Santoprene® NSF, CE, UL, RoHS

BLC5011-000A 100-240 VAC NO PLUG EPDM & Santoprene® NSF, CE, UL, RoHS

BLC1011-010A Positive displacement double diaphragm - pump with bottle water cap, tubing and faucet


1lb (632gr.)

2.67” (67.9 mm) x 4.06“ (103.1mm) x 7.76” (197.2 mm)






BLC1011-011A Positive displacement double diaphragm - pump with bottle water cap, tubing and faucet


1lb (632gr.)

2.67” (67.9 mm) x 4.06“ (103.1mm) x 7.76” (197.2 mm)






Solenoid Valves

Model: Pump Design: flow-H20 In GPM: (LPM)

flow-air In scFM: (ncmM)

DC Voltage: AC Voltage: Operating temperature range:

Operating pressure range:

Dimensions:(Height x Width x Depth):

Materials: Power Consumption:

100 Series ¹/8” (3.2 mm) portsNormally open and normally closed flow patterns

See page 44 See Page 44 12 or 24 12, 24, 120, or 240 Up to 120˚F/49˚C 10psi-250psi (0.6bar -14.2bar)

2.36 (60mm) x 1 (25.4mm) x 1.12 (28.5mm)

Available in polypropylene, brass and stainless steel

5 watts AC, 6 watts DC

300 Series ¹/8” (3.2 mm) portsNormally open and normally closed flow patterns

See page 45 See page 45 12, or 24 12, 24, 120, or 240 Up to 120˚F/49˚C 10psi-250psi (0.6bar -14.2bar)

See diagram on page 45 Available in polypropylene, brass and stainless steel

5 watts AC, 6 watts DC

900 Series ³/8”(9.52 mm), ½”(12.7 mm) and ¾”(19.1 mm) NPT portsNormally open and normally closed options available

See page 46 See page 46 12, or 24 12, 24, 120, or 240 Up to 120˚F/49˚C 10 – 150 PSI 3.25 )82.6mm) x 2.75 (69.9mm) x 2.35 (60mm)

- 5 watts AC, 6 watts DC

2000 Series ¼” (6.35 mm) and ³/8” (9.52mm) NPT portsNormally open and normally closed flow patterns

See page 47 See page 47 12, or 24 24, 120, or 240 varies depending on seal material

10psi-250psi (0.6bar -14.2bar)

2.9 (73.7mm) x 148 (30mm) x 1.48 (38mm)

- 12 watts AC, 14 watts DC

Selection Guide


40 41

INTRODUCTION

03 Coffee & Tea Pumps/Systems

For Espresso/Coffee Machines - V-Jet Espress 03COFFEE & TEA PUMPS/SYSTEMS

16.00

14.00

12.00

10.00

8.00

6.00

4.00

0.00

2.00

200

250

1450 rpm*1725 rpm

50

0

Pres

sure

(PSI

)

Flow (l/min)

Pres

sure

(Bar

)

150

100

0 2 4 6 8 10



aPPliCations


sPeCial features









sPeCifiCations












filter: Built in 100 mesh, removable for cleaning

BYPass setting: Built in, adjustable, pre-set to 11.7 Bar (170 psi).

gPh 125

elastometers: EPDM





V100A-510001 standard NSF 61

V125A-510001 high temperature NSF 61


Flojet has developed several systems dedicated to providing water pressure in to coffee, espresso and tea systems. Our range of systems offer the user the flexibility to either dispense water from bottles, boost city water pressure or simply provide water to a tap or faucet. Design and manufactured from our UK based facility in Hoddesdon, Herts, all our pumps and water systems are engineered for long life and trouble-free performance.

*V125 Model

03Product Information

Coffee & Tea Pumps/Systems

COFFEE & TEA PUMPS/SYSTEMS

03 Bottled Water Plus Dual Inlet

General Information

aPPliCations

Ì Designed for dispensing bottled water to coffee machines, beverage dispensers, vending machines and carts. See diagrams below

Ì For remote locations where water supply is inaccessible

sPeCial features

Ì Float switch for automatic shut-off when bottle is empty

Ì Simultaneously draw from two bottles

Ì Patented “T” design

Ì Available in appliance controller interface configuration

Ì Backward compatibility to Flojet single Inlet BW system kits available

Ì Built-in check valve to prevent back flow

Ì Universal seal cap

Ì Easy mounting and installation

Ì 20’ (6.1m) 0.250” (6.35mm) OD discharge hose included

Kits

Ì Dual inlet suction kits (convert single inlet to dual inlet) PN# 21000633A

Ì Auxiliary suction tube (no float) replacement kit PN# 21000596C


moDel # vaC Plug

Dual inlet

BW4020-000A 115 VAC US Plug

BW4022-000A 230 VAC AUS Plug

BW4023-000A 230 VAC UK Plug

BW4024-000A 230 VAC SHUKO Plug

Note: Not available for Europe

Coffee Cart / Kiosk with Dual Inlet BW System and Appliance Controller

Coffee Cart/Kiosk with Dual Inlet BW System

Kitchen / Refrigerator with Dual Inlet BW System


42 43

aPPliCations

Ì Designed for dispensing Bag in Box beverages or Bottled Water as indicated in Product Data Section

Ì Ideal for under counter installation

sPeCial features

Ì Quick, simple, safe installation

Ì Compact size for easy mounting

Ì Easily accessible manual on/off switch to restart the pump

Ì Self priming

Ì Able to run dry without damage

Ì Quiet operation

Ì Built in shut-off automatically turns pump off when bag is empty

sPeCifiCations

PumP Design: Positive displacement double diaphragm

Ports: T5000 style quick connect

aPProvals: NSF, CE, UL, RoHS

WetteD PumP Parts:

housing

elastomers

CheCK valve sPring

Polypropylene

EPDM & Santoprene®

Stainless Steel

liquiD temPerature: Min 34ºF (1.1ºC) / Max 120ºF (49ºC)

net Weight: 1lb (632gr.)

Dimensions: Length 7.76” [197.2 mm]Width 4.06“ [103.1mm]Height 2.67” [67.9 mm]

floW rate: 1.0 GPM (3.8 LPM) Max

amP DraW: 2.5 amp at 25 PSI (1.7 bar)

Pressure: 40 PSI (2.8 bar) Max

BevJet Compact 03COFFEE & TEA PUMPS/SYSTEMS

General Information

Note: Only used with specified products. DO NOT PUMP LIQUIDS WITH A FLASH POINT BELOW 100°F (38°C) OR USE WHERE FLAMMABLE VAPORS ARE PRESENT.

New


moDel numBer vaC Plug

BLC1011-000A 115 VAC US PLUG Positive displacement double diaphragm - base pumpBLC2011-000A 230 VAC UK PLUG

BLC3011-000A 230 VAC EU PLUG

BLC4011-000A 230 VAC AU PLUG

BLC5011-000A 100-240 VAC NO PLUG


BLC1011-010A 115 VAC US PLUG Positive displacement double diaphragm - pump with bottle water cap, tubing and faucet

BLC2011-010A 230 VAC UK PLUG




Can be used with beer, wine and alcoholthat contains less than 15% alcohol


BLC1011-011A 115 VAC US PLUG Positive displacement double diaphragm - pump with bottle water cap, tubing and faucet

BLC2011-011A 230 VAC UK PLUG




The above models contain a faucet and are to be used with water only

Product Information

Coffee & Tea Pumps/Systems 03Product Information

Coffee & Tea Pumps/Systems 03Product Information


03 100 SeriesCOFFEE & TEA PUMPS/SYSTEMS

General Information

valve highlights

Ì ¹/8” (3.2 mm) ports

Ì Normally open and normally closed flow patterns

Ì DC magnetic latching available

Ì Available in polypropylene, brass and stainless steel

internal ComPonents

Ì Stainless steel

eleCtriCal CharaCteristiCs

Ì Standard coil class: A (221˚F/105˚C)

Ì Power consumption: 5 watts AC, 6 watts DC

Ì DC voltages: 12 or 24

Ì AC voltages: 12, 24, 120, or 240

oPerating CharaCteristiCs

Ì Operating temperature range: Up to 120˚F/49˚C

Ì Operating pressure range 10psi-250psi (0.6bar -14.2bar)

stanDarD floW Data

floW-h20 in gPm (lPm)

nominal orifiCe Diameter

maximum gPm (lPm) Water floW

10psi (0.6 bar)

25psi (1.7 bar)

50psi (3.4 bar)

100psi (6.9 bar)

150psi (10.3 bar)

200psi (13.8 bar)

250psi (14.2 bar)

¹/32 (0.031) 0.06(0.23) 0.10(0.37) 0.14(0.52) 0.20(0.75) 0.24(0.91) 0.28(1.06) 0.032(1.21)

³/64 (0.047) 0.15(0.57) 0.24(0.91) 0.35(1.32) 0.46(1.74) 0.61(2.31) 0.70(2.65) 0.80(3.03)

¹/16 (0.063) 0.24(0.91) 0.38(1.4) 0.56(2.12) 0.80(3.03) 0.98(3.71) 1.12(4.24) 1.28(4.85)

³/32 (0.094) 0.51(1.93) 0.82(3.10) 1.19(4.50) 1.70(6.44) 2.05(7.76)

¹/8 (0.125) 0.84(3.18) 1.34(5.07) 1.96(7.42) 2.80(10.60)

5/32 (0.156) 1.19(4.50) 1.90(7.19)

floW-air in sCfm (nCmm)

nominal orifiCe Diameter

maximum sCfm air floW

10psi (0.6 bar)

25psi (1.7 bar)

50psi (3.4 bar)

100psi (6.9 bar)

150psi (10.3 bar)

200psi (13.8 bar)

250psi (14.2 bar)

¹/32 (0.031) 0.30(0.09) 0.56(0.11) 0.80(0.24) 1.70(0.52) 2.10(0.64) 2.70(0.82) 3.30(1.01)

³/64 (0.047) 0.75(0.23) 1.40(0.42) 2.00(0.61) 3.50(1.06) 5.25(1.61) 6.75(2.05) 8.25(2.51)

¹/16 (0.063) 1.20(0.36) 2.24(0.68) 3.20(0.98) 5.60(1.71) 8.40(2.56) 10.80(3.29) 13.20(4.02)

³/32 (0.094) 2.55(0.78) 4.76(1.45) 6.80(2.07) 11.90(3.63) 18.60(5.67)

¹/8 (0.125) 4.20(1.28) 7.84(2.39) 11.20(3.42) 19.60(5.97)

5/32 (0.156) 5.93(1.81) 11.06(3.37)

*For model number information consult factory at 714-628-8104

Certified to nsf/ansi 61

®

1.12

2.36

1.00

.25

.88

1/8" NPT

0

(60mm)

(28.5mm)

(25.4mm)

(22.4mm)

(3.2mm)(6.4mm)

Dimensional DraWing

Wire leads option shownSpade connection option shown

½" (12.7 mm) NPT male conduit connection shown

moDes of oPeration

2/2 Normally Closed Solenoid Operated Direct Acting

2/2 Normally Open 3/2 Normally Closed

3/2 Normally Open

3/2 Universal

300 Series 03

Certified to nsf/ansi 61

General Information

valve highlights

Ì ¹/8” (3.2 mm) ports

Ì Normally open and normally closed flow patterns

Ì ½” (12.7 mm) internal NPT electrical connection

Ì ABS plastic canister material

Ì Available in polypropylene, brass and stainless steel

Ì Epoxy encapsulated coil

internal ComPonents

Ì Stainless steel

eleCtriCal ConneCtion

Ì 18 AWG, 18” (457.2mm) leads

Ì PVC insulation

oPerating CharaCteristiCs

Ì Operating temperature range: Up to 120˚F/49˚C

Ì Operating pressure range 10psi-250psi (0.6bar -14.2bar)

eleCtriCal CharaCteristiCs

Ì Standard coil class: A (221˚F/105˚C)

Ì Power consumption: 5 watts AC, 6 watts DC

Ì DC voltages: 12, or

Documents

Beverage Product Catalogue - Installation Parts Supply Beverage Catalog.pdf80 psi (5.5 bar) max. 30 psi (2.1 bar) max. 6.0 oz. (177.4 ml)/ sec. - Open Flow NSF listed, CE 3 years G56