ADDITIONAL WORKS REQUIRED BY TESTING &

COMMISSIONING PUNCH LIST

1. Outdoor Children’s Play Area

Equipment.

Safety padding to 2.1 meter high required

to the shade columns

Safety padding to 2.1 high required to the

swing columns.

2. Road Signage.

Speed hump sign in the bottom should have speed HUMP text written in

Arabic & English.

Upon entering all the

gates, Speed Limit Signs

to be fixed

Page 1 of 10

Upon entering all the gates Reverse Parking signs to be fixed.

3. Tennis Court (With Seating).

Page 2 of 10

Tennis court is in elevated position, slope protection to provide around the

area to avoid future erosion

Guard rail is required at the end

and at the back of seating.

Drain line to introduce a gully or clean out in between for easy cleaning or

unblocking drain block.

4. Decorative

fence of

outdoor children’s play

area.

Page 3 of 10

Provide additional gate

to be used as an

emergency exit and

must be labeled.

ADDITIONAL WORKS REQUIRED – MULTI-PURPOSE SPORTS HALL

5. Multi-Purpose Sports Hall.

Acoustic boards installed

on the walls to be tested if

it will absorbed sounds.

6. External.

Page 4 of 10

Emergency Gates to be leveled in Arabic & English Text.

7. Children’s Play equipment area.

Children’s Play equipment area should be leveled both English & Arabic Text.

8. Aluminum Gates.

Door to be labeled on both side as identification.

Page 5 of 10

Door to be leveled flammable or hazard in Arabic & English text.

9. Frameless Glass Panels, Glass Doors & Glass Window.

Door to be labeled on

both side as

identification

Door to be labeled on both side as identification

Page 6 of 10

Middle support required in between panels to avoid swinging or vibration if

somebody accidentally lean in

the windows.

Life Guard room Door to be labeled on both side as identification

D-180 Door to be labeled on both side as identification

Frameless Glass Swinging Door to be labeled on both side as identification

Reception Area Door to be labeled on both side as identification

Gymnasium Door to be labeled on both side as identification

Pyramid Area – Middle Support required in between panels to avoid swinging

or vibration if somebody accidentally lean in the windows.

Corner of the window

having sharp edge to be

protected

Page 7 of 10

ND-7 Door to be labeled on both side as identification

W-4A Middle support required in between panels to avoid swinging or

vibration if somebody accidentally lean in the windows.

W-3 & W-4 Middle support required in between panels to avoid swinging or

vibration if somebody accidentally lean in the windows.

D1 & D2 Door to be labeled on both side as identification

D1A & D2A Door to be labeled on both side as identification

D9 & D38 Door to be labeled on both side as identification

Fixed Window Middle support required in between panels to avoid swinging or

vibration if somebody accidentally lean in the windows.

East Entry Door to be labeled on both side as identification

Glass Cladding Corner of the cladding having sharp edge to be protected

East Entry 2 Door to be labeled on both side as identification

Glass Cladding spider supported panel Corner of the cladding having sharp

edge to be protected

Zone C Door to be labeled on both side as identification

ND-1 Door to be labeled on both side as identification

ND-1 Corridor 5 Door to be labeled on both side as identification

D-75 Door to be labeled on both side as identification

Middle support required in between panels to avoid swinging or vibration if

somebody accidentally lean in the windows.

D-80 Door to be labeled on both side as identification

Exit sign above the door shall conform Qatar civil defense QCDD Standard

D-308 & D-309 Door to be labeled on both side as identification

D-297 Door to be labeled on both side as identification

D-81 & D-82 Door to be labeled on both side as identification

D-88 Door to be labeled on both side as identification

D-95 Door to be labeled on both side as identification

D-213 Door to be labeled on both side as identification

D-355 Door to be labeled on both side as identification

Page 8 of 10

10. Folding Partition.

Multi-Purpose hall – The provision doors in the panel of folding partitions in

the Push side to be provided a push plate.

Banquet hall- The provision doors in the panel of folding partitions in the

Push side to be provided a push plate.

Restaurant Area - The provision doors in the panel of folding partitions in

the Push side to be provided a push plate.

Page 9 of 10

11. Chain Link fence around the tennis court.

Gates to be labeled

Emergency gates to be installed

Page 10 of 10