Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Product Data Sheet 001/1 Issue 3
www.tranilamp.co.uk
IndexProductData Sheets
DataSheet
200
1&2
1&2
1&2
1&2
1&2
1&2
1
1
2
2
1
2
1&2 3
3
3
3
3
3
3
3
3
3
3
3
3
Transformer Lamp Indicator
Multi-Test Transformer Indicator (AC)
Multi-Test Diode Indicator (DC)
Direct Voltage Indicator
Housing and Lens Assemblies
Lamps - MES MBC
Audible Alarms, Neons, OptoLED7
Neon / Fluorescent Indicator
Direct Current Indicator
LED Mimic Indicators
Flashing Indicator / Power Failure
Direct Low Voltage Indicators / Legend
Single LED Indicators 6-12mm
TMU TEMU
MTMU
DTMU
LMU
JY and H Series
Filament LED7 LED4 LEDM1
AK NB2 NG2 NW2 Optoled
NBMU NGMU NWMU
RMU IRMU
SEM SEMP LMURGY ROL ROT
FACTMU FDCIRMU PFTMU
LMU/MES/2 LMU/MBC/2 Legend Plates
LMR
201
201
202
203
204
205
206
207
208
208
209
209
PageNo
IssueNo
Product Description Product Range
Panel Control Units - Standard Range
Tranilamp Transformers - Available from www.amethyst-designs.co.uk
Conditions of Sale Data Sheet 001/2
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]
We can make bespoke indicators to your requirements, with a manufacturing technique
honed to reduce the heavy cost penalties normally associated with non-standard products.
Much of our bespoke work is provided using features of standard products, tailored to meet
specifications. Tranilamp has the benefit of more than 50 years experience in this market,
and can draw on this to find an economic solution to your problem.
Tel 01954 789696Fax 01954 789662Email [email protected]
Tranilamp transformers are manufactured by our sister company
Amethyst Designs Ltd9 Trafalgar WayBar HillCambridgeCB3 8SQ
Bespoke
Product Data Sheet 001/2 Issue 3
www.tranilamp.co.ukConditionsof Sale
Our terms are net monthly and where previous payments are outstanding for 45
days any new orders will not be commenced until the account is cleared. Special
terms and agreed quantity discounts will only be given on the understanding that
payment of the invoice is made within 45 days, otherwise a further invoice will be
issued for the appropriate discount shown and full payment demanded.
We reserve the right to alter prices and specifications of any articles in the
catalogue.
A minimum order charge will be applied.
Improvement in design from time to time may alter the present illustrations or
descriptions. Every care has been taken to ensure that the data and dimensions
are correct as shown but we accept no liability in respect of contingencies arising
from errors. Where dimensions are critical a check should be made for the latest
data.
Wherever possible BS grade materials are used in our products and all units
undergo tests before despatch. We will replace or repair free of charge under
guarantee any of our products returned within 24 months of the date of sale
providing there is prior agreement and they have been properly used and defects
are solely due to faulty workmanship or materials. We will not replace lamps or
any units that have been overloaded or otherwise damaged. We do not accept
responsibility for any consequential damage whatsoever arising from, or said to
arise from, the use of our products.
Notwithstanding delivery, all goods supplied by us will remain our absolute
property until you pay in full for them and for all other goods previously supplied by
us. You will store the goods in such a way that they are readily identifiable as our
property, but you may, as trustees for us, sell them to a third party in the normal
course of your business. Upon any sale by you of the goods (either alone or with
other items) all rights which you have against the buyer shall automatically vest in
us. We shall be entitled, immediately after giving notice of our intention to
repossess, to enter upon any premises with such transport as may be necessary
and repossess any goods to which we have title under this clause.
Conditions of Sale
Our terms are net monthly and where previous payments are outstanding for 45
days any new orders will not be commenced until the account is cleared. Special
terms and agreed quantity discounts will only be given on the understanding that
payment of the invoice is made within 45 days, otherwise a further invoice will be
issued for the appropriate discount shown and full payment demanded.
We reserve the right to alter prices and specifications of any articles in the
catalogue.
A minimum order charge will be applied.
Improvement in design from time to time may alter the present illustrations or
descriptions. Every care has been taken to ensure that the data and dimensions
are correct as shown but we accept no liability in respect of contingencies arising
from errors. Where dimensions are critical a check should be made for the latest
data.
Wherever possible BS grade materials are used in our products and all units
undergo tests before despatch. We will replace or repair free of charge under
guarantee any of our products returned within 24 months of the date of sale
providing there is prior agreement and they have been properly used and defects
are solely due to faulty workmanship or materials. We will not replace lamps or
any units that have been overloaded or otherwise damaged. We do not accept
responsibility for any consequential damage whatsoever arising from, or said to
arise from, the use of our products.
Notwithstanding delivery, all goods supplied by us will remain our absolute
property until you pay in full for them and for all other goods previously supplied by
us. You will store the goods in such a way that they are readily identifiable as our
property, but you may, as trustees for us, sell them to a third party in the normal
course of your business. Upon any sale by you of the goods (either alone or with
other items) all rights which you have against the buyer shall automatically vest in
us. We shall be entitled, immediately after giving notice of our intention to
repossess, to enter upon any premises with such transport as may be necessary
and repossess any goods to which we have title under this clause.
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]
MH MH
MA(Colour) MC(Colour) FA(Colour)
FH FHB LH LHB DH
FB(Colour) LA(Colour) LB(Colour) DA(Colour)
O RING 19x2.5locking nut-panel
O RING 19x2.5housing
shoulder-panel
WASHER RUBBER LH metal ring-panelLH PTT WHITE INSERT inside housing
O RING 22x1.5 lens to white insert
WASHER RUBBER DH bezel-panel
Polycarbonate available for FB (Specify "Polycarbonate Lens")
Black Epoxy Coating (Specify “Black Bezel”)
Available for all housings either blank or engraved, as required. (Data Sheet 209/2)
Available on all housings. (Specify '' '')DIN Keyed
Housings & Bezels:- Nickel plated brass.Lens:- Polystyrene (lamps more than 2W use Polycarbonate).Protection:- IP64.
PanelFront
Interchangeable housing/lens for Indicator Lamp Body Units. Use table overleaf to check compatibility and correct housing length for the required lamp/LED.
Product Code Example:-"MHLC Red" or "MHLCR” = MHL Housing + MC Red Lens
BJ(Colour) BY(Colour) BJ(Colour)
ADMF ADFD
BY(Colour) BY(Colour)
MP FP
IP65standard
IP65standard
Not available Not available Not available
Not availableNot available
Not available Not available
Not availableM KEYWAY WASHER (Specify '' '')DIN Keyed F KEYWAY WASHER (Specify '' '')DIN Keyed
Housings:- Black glass reinforced nylon.Lens:- Polycarbonate welded to bezels.Bezels:- BJ & BY - Nickel plated brass; BKY - Black plastic.Protection:- with BJ & BY - IP64; with BKY - IP65.
PanelFront
Product Code Example:- FY Blue or FYB = FP Housing + BY Blue Lens
JY Series
H Series
Hole Dia mmLens Dia mm
DIN Keyway
CompleteAssembly
Housing
Panel HoleAdaptor
Protectionto IP65
Lens
303022.33022.3
19 30.5
MY MKY FJ FY FKY DYMJ
30.52623.5
26.523.523.5
22.521.517
1917.5
Op
tio
ns
Housing
CompleteAssembly
Check overleaffor correct length of housing to use with lamp/LED.
Lens
Protectionto IP65
Lens Material
Black Bezels
Legend Plates
DIN Keyway
Hole Dia mmLens Dia mm
Note: FB=LB Note: FB=LB
22.5
Op
tio
ns
BY
BJ
20
0
BKY
BKY(Colour) BKY(Colour)
30 30
= Amber= Blue= Green= Red= Clear = White
= Amber= Blue= Green= Red= Clear = White
ABGRCW
ABGRCW
LensColour
LensColour
LensColour
LensColour
LensColour
LensColour
LensColour
LensColour
LensColour
LensColour
LensColour
LensColour
LensColour
LensColour
DHALHBLHAFHBFHLB
MHCMHLCMHXLC
MHAMHLA
FHAFHLA
Product Data Sheet 200/1 Issue 3
www.tranilamp.co.ukHousing & LensAssemblies
Series
JYH
FHLMHL
MHXL
<- Discontinued ->
Product Data Sheet 200/2 Issue 3
www.tranilamp.co.ukX Housing & LensAssembliesSeries
Interchangeable Housing/Lens for Indicator Lamp Body Units
MXA
MXC
FXA
FXB
MA(Colour) MC(Colour) FA(Colour) FB(Colour)
MX
IP64
Polystyrene Polystyrene Polystyrene Polystyrene
IP64 IP65 IP64
Housings:- Black glass reinforced nylon.Bezels:- Nickel plated brass.
PanelFront
X SeriesHole Dia mmLens Dia mm
Protection
Lens Material
CompleteAssembly
Housing
Lens
23.521.51717.5
19 19 22.5 22.5
MXC FXA FXBMXA
= Amber= Blue= Green= Red= Clear = White
ABGRCW
LensColour
LensColour
LensColour
LensColour
FX FXB
20
0Use table below to check compatibility with the required lamp/LED.
IndicatorBody
Te
rmin
als
h bPanelDimension Key
h + b = front of panel to back of indicator depth
h = housing depth shown in table above
b = body depth shown on Data Sheet for the Indicator lamp body
Ho
usin
gHousing/Lamp Compatibility Table
MJ
MX
A
MH
A
MH
LA
MH
C
MX
C
MH
LC
MH
XL
C
FH
A
FH
LA
FH
B
FH
LB
MY
or M
KY FJ
FX
A
FX
B
FY
or F
KY
DYLamp/LED Type
Neon
Neon
Filament
Filament
LED7 & LED4
LED7 & LED4
LEDM1 & LEDM4
LEDM1 & LEDM4
LED1F
LED1F
Panel Hole Dia.
h - Housing Depth
19 19 22.5 22.5 22.522.5 30.5
1113 14 14111313 15111511221513 1315 1313
MES
MBC
1919 19 19 1919 19 22.5 22.5 22.5 22.5
Compare the Housing/Lens
assembly and the Lamp/LED
chosen, to verify they are
compatible.
X XX XXX X XX
X X
X X
X X
XX
X
X XX
XX
XX
XX
XX X XXXX
XX X XXX
X
X XX X
X X
X X XXX
XX
XX X XXX X XX X
X X
X X XXX
XX
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]
Product Data Sheet 201/1 Issue 3
www.tranilamp.co.ukLamps for Indicators
Filament, LED Clusters
Transformer indicators with 6V lamps are run at reduced voltage, giving up to 400% extra life
VoltsAC or DC
Watts MAMES MBC
Product Code
6
6
12
24
24
28
50
60
130
1.2 Flash
1.8
1.2
1.2
2.8
1.0
2.5
1.2
2.6
50
300
100
50
120
40
50
20
20
6V1.2 Flash
6V1.8
12V1.2
24V1.2
24V2.8
28V1.0
50V2.5
60V1.2
130V2.6
-
6V1.8 MBC
12V1.2 MBC
24V1.2 MBC
-
28V1.0 MBC
-
60V1.2 MBC
130V2.6 MBC
-
4,000
5,000
5,000
3,000
3,000
5,000
3,000
3,000
-
11
5
4
12
12
9
2.2
3
DimensionsTypical Life (hours)
- AC volts(for DC reduce by 40%)
TypicalBrightness
(Lumen)
Filament
Lamps
MBC
Weight: 2 g
MES
Weight: 2 g
Lamp Cap Types:MES = Miniature Edison Screw - E10. Supplied as standard unless otherwise specified.MBC = Miniature Bayonet Cap - BA9s. Available for most lamp types. Specify if required.
Long life, bright lamps at lower currents. The LED’s are configured where possible in parallel circuits. This means that the functionality of the lamp is maintained in the event of a diode failure. Where the lowest possible current is required the LED’s are put in series.
DimensionsTypical
Brightness
Circuit Configurations
LED clusters are designed to give a brightness similar to filament bulbs. We manufacture 7 or 4 LED clusters. The more LED’s in the cluster, then the better the light spread through lenses.
Normal configurations ofmulti-LED clusters useparallel connected circuitsof LED’s. If one LED failsthe lamp still functionsthrough a healthy circuit. Continuity of operation and visibility of a failure is a considerable aid to maintenance.However, some applications demand minimum current, eg IRMU’s. In these instances a single series circuit may be used.
LEDM1 is a range of single LED lamps chosen for their brightness and field ofvision.
Blue and White clusters are not available at 4.5VDC for the LED7.
Example 1: LED7A 4.5AC MES = LED7 Amber cluster 4.5VAC with E10 Miniature Edison Screw cap.Example 2: LED4R 24DC 20mA MBC = LED4 Red cluster 24VDC (20mA option) with BA9s Miniature Bayonet Cap.Example 3: LEDM1W 24AC MBC = LEDM1 White single LED 24VAC with BA9s Miniature Bayonet Cap.
MBC
MES
Weight: 3 g
LED7
MES
Weight: 3 g
LED4
MBC
MBC
MES
Weight: 2 g
LEDM4
LEDM1
LED Clusters
Product Code Make-upColour Voltage Current Cap
AGRBW
AGRBW
AGRBW
AGRBW
MES
or
MBC
MES
or
MBC
MES
or
MBC
MES
or
MBC
Other AC/DC voltages on application. Colour Key:- A=Amber, G=Green, R=Red, B=Blue, W=White
LED7
LED4
LEDM4
LEDM1
VoltageType
VoltsAC/DC
Current mA
Wide light spread for indicator lamps
For indicator lamps
For indicator lamps
For illuminated actuating assemblies
Type
LED7
LED4
LEDM4
LEDM1
AGR B W
MBC
MES
Weight: 2 g
4.5
24AC
110
*
*
110
110
110
4.5
24DC
24
4.5
4.5
4.5
4.5
24
24
24DC
24DC
24DC
24AC
24AC
24AC
60
40
8
8
8
8 8 8
80
40 40 40
20
20
20
40
40
20 20 20
40
40
20 20 20
40
40
40
20 20 20
40
40
40
40
40
40
40
40
40
40
40
80
40
40
20
20
20
20
20
20
80
40
8
8
8
-
80 4.5AC
24AC
110AC
4.5DC
24DC
24DC 20mA
20mA
20mA
4.5AC
4.5AC
4.5AC
24AC
24AC
24AC
110AC
110AC
110AC
4.5DC
24DC
24DC
24DC
24DC
24DC
40
8
8
8
-
Lamp lives given here are typical only. Actual
lives depend on environmental
conditions such as shock,
vibration, temperature and voltage fluctuations.
20
1
10.5 24
22
14.4
13.4
28
27
10.5
10.3
10.3
30 max
28
Product Data Sheet 201/2 Issue 3
www.tranilamp.co.ukAlarmsLamps
Audible AlarmsNeon/FluorescentOptoled7
Designed as a replacement for pigmy lamps on control panelswhere low power consumption and long life are desirable.
By using 7 ultra-bright LED's the total brightness is typically 2,000 mcd (25 lumen).The arrangement of LED's ensures the optimum diffusion of light through a lens, minimising light concentrations.Available in 24V, 110V, 230V AC at 50/60Hz and 24V, 110V DC. Less than 25mA per lamp.The plastic body is to flame retardant to UL94V0.
Optoled7
OPTOLED7 AGRBW
24AC24DC110AC110DC230AC
BCSBC
Type VoltageColour Cap
A=Amber, G=Green, R=Red, B=Blue, W=White
Examples 1. OPTOLED7A 110AC BC
2. OPTOLED7W 24DC SBC
Typical Life
Orange
Current RatingAll 1.8mA
Colour
Green
Neon, Fluorescent
Blue
Fluorescent
Fluorescent
Type
Neon
10,000 hours on AC Supply - 6,000 hours on DC Supply
NB2 MES
NG2 MES
NW2 MES
For Tranilamp ‘N’ typeindicators bodies onlyData Sheet 206
NB2 MBC
NG2 MBC
NW2 MBC
For direct connection to Supply (internal resistor fitted).For ‘LMU’ type Indicator bodies, Data Sheets 205 & 209
A very low current alternative, if low brightness is acceptable. Neon's can be used with opal, clear, red and amber lenses; fluorescent’s only their own colour lenses.
Product Code
Typical Brightness
NB2R 240 MES
NG2R 240 MES
NW2R 240 MES
Supply 240V (AC or DC)
NW2R 240 MBC
NB2R 240 MBC
NG2R 240 MBC
All 0.27 lumen
MES
MBC
Dimensions mm
Weight: 3 g
BC
SBC
30
30
10
10
6V AC/DC UNIT-
FOR USE WITHTRANSFORMER LAMP HOLDER TO 550V AC
or INTERNAL RESISTOR HOLDER TO 110V DCe.g. AKMJ/TMU240/4 AKFY/IRMU24/4
Typical sound output 88 dB @ 10 cm.
PANEL HOLE
DIAMETER
22.5 mm
22.5 mm
30.5 mm
19 mm
19 mm
Audible AlarmsHOUSING
WITH ALARM
AKMY
AKDY
AKMJ
AKFY
AKFJ
MES
MBC
Voltages up to 110V DC or 550V AC
AKAKMYAKMJ
SBCBCBayonet Cap- B22d
Small Bayonet Cap- B15d24 24
OPTOLED7230 VAC GREEN
OPTOLED7110 VAC AMBER
Weight11g
Weight16g
5252
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]
Product Data Sheet 202/1 Issue 3
www.tranilamp.co.uk
20
2
Types
Standard Input Voltages
Surrounding Air Temperature
Lamp
Mounting
Terminations
Construction
Tests
Weight (Body Only
TMU - Transformer Indicator Lamp Body.TEMU - As TMU with earthed secondary.
24, 110, 240V AC 50/60Hz
Maximum 50 C when operating.
6V, 1.8W MES - Miniature Edison Screw E10
Use JY, H or X Series housings and lenses.See Data Sheet 200. TMU's screw onto the housings.
M3.5 cable clamps with fixed terminal covers to IP20.
Transformers are encapsulated in mouldings.ABS/Polycarbonate grey, flame retardant to UL94V0.
TMU’s and TEMU’s conform to BS EN 60947-5-1CE labelled in conformance with L.V. Directive.
)TMU - 114g, TEMU - 115g
TMU Indicator Body and Lamp(without lens/housing)
Optional Extras
Operating Frequency
Input Voltages
Lamps
Lamp Caps
Protection to 65
400Hz.
440, 550V and others available on request.
LED4 cluster lampLED7 cluster lampLEDM1 single LED lampSee Data Sheet 201 for full list of lamps
BA9s Miniature Bayonet Cap - MBC
Additional seals may be necessary for housings and lenses, see Data Sheet 200.
IP
To find the correct Product Code for odering, please turn to the reverse side.
Tranilamp TMU's
increase life expectancy of lamps
increase safetyLamp voltages are isolated and at low safe levels.
Standard Specification
Running the lamp at below rated voltageincreases the typical running life of a filamentlamp from 4000 hours to beyond 16,000 hours.Tranilamp LED clusters offer an extended reliablelife.
TransformerLamp Indicators
TEMU
TMU
TEMU/LED7/VOLTAGE/4 TEMU/LED4/VOLTAGE/4 CONNECTIONS TEMUTEMU/VOLTAGE/4
TMU/LED7/VOLTAGE/4TMU/VOLTAGE/4 TMU/LED4/VOLTAGE/4 CONNECTIONS
35 mm
TMU
62 mm
59 mm 35 mm
Product Data Sheet 202/2 Issue 3
www.tranilamp.co.uk
Standard Voltagesavailable
Optional Voltages(Others on application)
24V
110V
240V
440V
550V
Standard: Miniature Edison Screw (E10) - MES
Optional: Miniature Bayonet Cap (BA9s) - MBC
3.5mm captive cable clamp with cover
Transformer Lamp Body
Transformer Lamp Bodywith Earthed Secondary
Body / Lamp / Input / Cap / 4Type Type Volts Type
Indicator Body Lamp Product Code
/
400 Hz Operation
(see Product Data Sheet 200) (If applicable)
Lens Housing Lens Colour
How to derive the correct Product Code
TMU
TEMU
24
110
240
440
550
-
MBC
4
Specify 400Hz after Code
BODY
INPUTVOLTAGES
LAMP CAPS
TERMINATIONS
OPTIONAL
TransformerLamp Indicators
LED7 Cluster 4.5V AC
LED4 Cluster 4.5V AC
LEDM1 4.5V ACsingle LED lamp
Filament Lamp 6V 1.8W
RED
AMBER
GREEN
BLUE
WHITE
RED
AMBER
GREEN
BLUE
WHITE
-
LED7R
LED7A
LED7G
LED7B
LED7W
LED4R
LED4A
LED4G
LED4B
LED4W
LEDM1R
LEDM1A
LEDM1G
LEDM1B
LEDM1W
LAMP
RED
AMBER
GREEN
BLUE
WHITE
Example 2Product Code:- FHA/TEMU/110/4 Blue
TEMU lamp bodywith earthed secondary6V MES filament lampmounted on an FH housingFA blue lens.Input: 110V AC, 50/60 Hz.
Example 1Product Code:- TMU/LED7R/240/MBC/4
TMU lamp bodyLED7 Red 4.5V AC MBCInput: 240V AC, 50/60 Hz.
TMUTEMU
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]
Product Data Sheet 203/1 Issue 3
www.tranilamp.co.uk
Tranilamp MTMU's
Multi-Lamp Test Indicators enable groups ofindicator lamps to be tested from a single pushbutton switch without interrupting normal operation.
increase life expectancy of lamps
increase safety
Input Voltages
Ratings
Surrounding Air Temperature
Lamp
Mounting
Terminations
Construction
24, 110, 240V. AC 50/60Hz
Nominal current rating of MTMU's in Test Mode: Input Voltage 24V 110V 240V Current Rating 160mA 40mA 30mA
Maximum 50 C when operating.
6V, 1.8W MES - Miniature Edison Screw E10
Use JY, H or X Series housings and lenses.See Data Sheet 200. MTMU's screw onto housings.
M3.5 cable clamps with fixed terminal covers to IP20
ABS/Polycarbonate grey, flame retardant to UL94VOTransformers are encapsulated in mouldings.
MTMU’s conform to BS EN 60944-5-1CE labelled in conformance with L.V. Directive.
Tests
MTMU
Weight (Body Only) 141 g
Lamps
Lamp Caps
Protection to 65
LED4 cluster lampLED7 cluster lampLEDM1 single LED lampSee Data Sheet 201 for full list of lamps
BA9s Miniature Bayonet Cap - MBC
Additional seals may be necessary for housings and lenses, see Data Sheet 200.
IP
To find the correct Product Code forordering, please turn to the reverse side.
Standard Specification
Optional Extras
67 mm 35 mm
TEST COMM
SIG
SIG
TEST
COMM
(OPERATING LINE)
Running the lamp at below rated voltage increases the typical running life of a filament lamp from4000 hours to beyond 16,000 hours. Tranilamp LEDclusters offer an extended reliable life.
Isolates the Operating Line when in Test Mode.Lamp voltages are run at very low safe values.
MTMU/VOLTAGE/4 MTMU/LED7/VOLTAGE/4 MTMU/LED4/VOLTAGE/4 CONNECTIONS
MTMU's incorporate a single pole changeover relay to enable many units to be tested from one Test Pushbutton without interrupting normal operation.
The Control Circuit is entirely isolated from the Indicator when the Test Pushbutton is pressed, thus eliminating any feedback.
If a 3 phase supply is used, the Test Circuit must be on the same phase as the Control Circuit.
TEST TEST TEST
SIG SIG SIG
COMM COMM COMM
Push totest allindicators
OperatingLine
OperatingLine
OperatingLine
MTMU
MTMU
MTMU
Ac supply
MTMUMulti-TestTransformer Indicator
MTMU Indicator Body and Lamp (without lens/housing)
20
3
Product Data Sheet 203/2 Issue 3
www.tranilamp.co.uk
MTMUMulti-TestTransformer Indicator
Example 2Product Code:- MHA/MTMU/110/4 Blue
MTMU lamp body6V MES filament lampmounted on an MH housingMA blue lens.Input: 110V, 50/60 Hz.
Example 1Product Code:- MTMU/LED7R/240/MBC/4
MTMU Lamp bodyRed LED7 4.5V AC MBCInput: 240V AC, 50/60 Hz.
Standard Voltagesavailable
24V
110V
240V
Standard: Miniature Edison Screw (E10) - MES
Optional: Miniature Bayonet Cap (BA9s) - MBC
3.5mm captive cable clamp with cover
Transformer Multi-TestLamp Body
Body / Lamp / Input / Cap / 4Type Type Volts Type
Indicator Body Lamp Product Code
/
Lamp Remover - suitable for all lamps
(see Product Data Sheet 200) (If applicable)
Lens Housing Lens Colour
How to derive the correct Product Code
MTMU
24
110
240
-
MBC
4
LR1 (packs of 10)
BODY
INPUTVOLTAGES
LAMP CAPS
TERMINATIONS
ACCESSORIES
LED7 Cluster 4.5V AC
LED4 Cluster 4.5V AC
LEDM1 4.5V ACsingle LED lamp
Filament Lamp 6V 1.8W
RED
AMBER
GREEN
BLUE
WHITE
RED
AMBER
GREEN
BLUE
WHITE
-
LED7R
LED7A
LED7G
LED7B
LED7W
LED4R
LED4A
LED4G
LED4B
LED4W
LEDM1R
LEDM1A
LEDM1G
LEDM1B
LEDM1W
LAMP
RED
AMBER
GREEN
BLUE
WHITE
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]
Product Data Sheet 204/1 Issue 3
www.tranilamp.co.ukMulti-TestDiode Indicator
Tranilamp DTMU's
Multi-Lamp Test Indicators enable groups ofindicator lamps to be tested from a single pushbuttonswitch without interrupting normal operation.
Input Voltages
Test Mode Current Ratings
Surrounding Air Temperature
Lamps
Lamp Cap
MountingUse
Terminations
Construction
Tests
Weight (Body Only)
6, 12, 24, 28, 50 or 60V DC supplies. AC may be used but with reduced lamp brightness.
As Operating Mode i.e. Lamp rating.
Maximum 50 C when operating.
Only supplied as Options. For LED's use only DC.
E10 Miniature Edison Screw - MES
JY, H or X Series housings and lenses.See Data Sheet 200. DTMU's screw onto housings.
M3.5 cable clamps with fixed terminal covers to IP20
ABS/Polycarbonate, flame retardant UL94V0 non-drip
DTMU's conform to BS EN 60947-5-1.CE labelled in conformance with the L.V. Directive.
29 g
Lamps
Lamp Caps
IP65 Protection
Lamp Remover LR1
Filament Lamps up to 60VLED4 cluster lampLED7 cluster lampLEDM1 single LEDAll LED’s must be DCSee Data Sheet 201 for list of lamps available.
BA9s Miniature Bayonet Cap - MBC
Additional seals may be necessary for housings and lenses, see Data Sheet 200.
Suitable for all lamps
Optional Extras
Standard Specification
Use of a simple diode blocking technique makes this multi-test indicator particularly suitable for DC control circuits at low cost.
To find the correct Product Code for ordering, please turn to the reverse side.
Offer an economic solution
DTMU Indicator Body and Lamp(Lens/Housings/Lamps are Optional)
204
DTMU
35 mm
TEST COMM
SIG
CONNECTIONS
50 mm
DTMU's incorporate blocking diodes to enable a group of units to be tested from one Test Pushbutton without interrupt ing normal operation.
The Control Circuit will usually be DC, but AC can be used with reduced brightness.
Please advise us if battery backup services are fitted to the supply.
LED cluster lamps must always be DC type.
DTMU/LED4/VOLTAGE/4DTMU/LED7/VOLTAGE/4DTMU/VOLTAGE/4
SIG
TEST
COMM
(OPERATING LINE)
TEST TEST TEST
SIG SIG SIG
COMM COMM COMM
Push totest allindicators
OperatingLine
OperatingLine
OperatingLine
DTMU
DTMU
DTMU
DC supply+-
DTMU
Product Data Sheet 204/2 Issue 3
www.tranilamp.co.uk
Filament Lampsuitable Voltages (DC Supply preferred.If AC Supply used lampoperates at reducedbrightness)
No Lamp fitted
6V
12V
24V
28V
50V
60V
24V DC
-
6
12
24
28
50
60
24
INPUTVOLTAGES(identical to lamp voltage)
LED7, LED4 or LEDM1
Miniature Edison Screw (E10) - MES (lamp fitted)
Miniature Edison Screw (E10) - MES (no lamp fitted)
Optional: Miniature Bayonet Cap (BA9s) - MBC
3.5mm captive cable clamp with cover.
Low Voltage Multi-Test IndicatorLamp Body
Body / Lamp / Input / Cap / 4 Type Type Volts Type
Indicator Body Lamp Product Code
Lens Colour(If applicable)
Multi-TestDiode Indicator
How to derive the correct Product Code
DTMU
-
MBC
4
BODY
LAMP CAPS
TERMINATIONS
MES
Lens Housing /(See Product Data Sheet 200)
LED7 Cluster 24V DC
LED4 Cluster 24V DC
RED
AMBER
GREEN
BLUE
WHITE
RED
AMBER
GREEN
BLUE
WHITE
-
LED7R
LED7A
LED7G
LED7B
LED7W
LED4R
LED4A
LED4G
LED4B
LED4W
LEDM1R
LEDM1A
LEDM1G
LEDM1B
LEDM1W
Lamps for DTMU’s are extra.If required Lamp Voltage is specified as Input Voltage.See data sheet 201 for list of lamps.
Filament Lamp: 6,12, 24, 28, 50, 60V
LAMP
RED
AMBER
GREEN
BLUE
WHITE
LEDM1 24V DCsingle LED lamp
Example 1Product Code:- DTMU/LED7A/24/MBC/4
DTMU lamp bodyLED7 Amber 24V DC MBCInput: 24V DC.
Example 2Product Code:- FHA/DTMU/MES/4 Red
DTMU lamp bodywith no lamp suppliedfitted with MES lamp holdermounted on an FH housingFA red lens.
Input: Unspecified.
DTMU
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]
Product Data Sheet 205/1 Issue 3
www.tranilamp.co.uk
20
5
Direct Voltage Indicators enable indicator lampsto be connected directly to the Supply Voltage.
Input Voltages
Surrounding Air Temperature
Lamps
Lamp Caps
MountingUse
Terminations
Construction
Tests
Weight (Body Only)
Same as and determined by the lamp used.Suitable for AC or DC supplies.Maximum Voltage: 240V AC - (neon’s only)
Maximum 50 C when operating.
Only supplied as Optional Extra.See Data Sheet 201 for list of lampsNote: Lamps must not exceed 2W when used with polystyrene lenses.
E10 Miniature Edison Screw - MES
JY, H or X Series housings and lenses.See Data Sheet 200. LMU's screw onto housings.
M3.5 cable clamps with fixed terminal covers to IP20Solder tab terminals are available using Low Voltage LMU/MES/2 see Data Sheet 209/2.
Body constructed of ABS/Polycarbonate grey, flame retardant to UL94V0 non-drip.
LMU's conform to BS EN 60947-5-1.CE labelled in conformance with the L.V. Directive.
LMU - 26 g.
Lamps
Lamp Caps
lP65 Protection
Lamp Remover LR1
Filament Lamps 6,12, 24, 50, 60 or 130VLED4 cluster lampLED7 cluster lampLEDM1 or single LEDNeon's and Fluorescent's in orange, green and blue at 110V AC and 240V AC. See Data Sheet 201 for full list of lamps
BA9s Miniature Bayonet Cap - MBC
Additional seals may be necessary for housings and lenses see Data Sheet 200.
Suitable for all lamps
Optional Extras
Standard Specification
Can use with Tranilamp's extensive range of: Filament Lamps LED cluster lamps Neon lamps Panel housings and lenses
The low cost way to accommodate most control circuit supplies, both AC and DC.
Offer an economic solution
Tranilamp LMU’s
Increase flexibility
LMU Indicator Body and Lamp(Lens/Housings/Lamps are Optional)
To find the correct Product Code forordering, please turn to the reverse side.
LMU
42 mm 35 mm
CONNECTIONSLMU/LED4/VOLTAGE/4LMU/LED7/VOLTAGE/4LMU/VOLTAGE/4
L/+
N/-
LMUDirect Voltage Indicator
Product Data Sheet 205/2 Issue 3
www.tranilamp.co.uk
Miniature Edison Screw (E10) - MES (lamp fitted)
Optional: Miniature Bayonet Cap (BA9s) - MBC
3.5mm captive cable clamp with cover.
Direct VoltageIndicator Lamp Body
LMUDirect VoltageIndicator
LMU
-
MBC
4
BODY
LAMP CAPS
TERMINATIONS
Miniature Edison Screw (E10) - MES (no lamp fitted) MES
Other voltages
on application
See Data Sheet 201
for list of standard
Lamps
LED’s
Neon’s
LED7 Cluster24V AC or DC or 110V AC
LED4 Cluster24V AC or DC or 110V AC
RED
AMBER
GREEN
BLUE
WHITE
RED
AMBER
GREEN
BLUE
WHITE
RED
AMBER
GREEN
BLUE
WHITE
NEON
GREEN
BLUE
-
LED7R
LED7A
LED7G
LED7B
LED7W
LED4R
LED4A
LED4G
LED4B
LED4W
LEDM1R
LEDM1A
LEDM1G
LEDM1B
LEDM1W
NB2R
NG2R
NW2R
LAMP
Lamps for LMU’s are extra
Filament: 6,12, 24, 28, 50, 60, 130V
Neon or Fluorescent Lamp110V AC, 240V AC
Filament Lampsuitable AC or DC
No Lamp fitted
6V
12V
24V
28V
50V
60V
130V
24V AC
110V AC
24V DC
110V
240V
-
6
12
24
28
50
60
130
24AC
110
24DC
110
240
INPUT VOLTAGES(identical to lamp voltage)
LED7, LED4 or LEDM1
Neon or FluorescentLamps suitable for AC
LEDM1 single LED lamp24V AC or DC, 110V AC
Example 1Product Code:- LMU/LED4A/24AC/MBC/4
LMU Lamp bodyLED4 Amber 24V AC MBCInput: 24V AC.
Example 2Product Code:- MHA/LMU/MES/4 White
LMU Lamp bodywith no lamp suppliedfitted with MES lamp holdermounted on an MH housing MA white lens.Input: Unspecified.
Body / Lamp / Input / Cap / 4 Type Type Volts Type
Indicator Body Lamp Product Code
Lens Colour(If applicable)
How to derive the correct Product Code
Lens Housing /(See Product Data Sheet 200)
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]
20
6
Tranilamp 'N' Types
'N' Type indicators are body units complete withneon/fluorescent lamps covering a range ofAC voltages.
Input Voltages
Lamp Caps
Protection to IP65
Lamp Remover LR1
440V AC, other voltages on application.
BA9s Miniature Bayonet Cap - MBC
Additional seals may be necessary for housings and lenses, see Data Sheet 200.
Suitable for all lamps
Standard Specification
In-built blocking resistors eliminate pickup.
Where the total allowable lamp load current is low, the N Type may be the solution.
low loading
no half light pickup
Types
Input Voltages
Rating
Surrounding Air Temperature
Lamps
Lamp Cap
Tests
Weight (Body Only)
NBMU - Indicator body with neon lamp (orange).NGMU - Indicator body with fluorescent lamp (green).NWMU - Indicator body with fluorescent lamp (blue).
110, 240V AC 50/60 Hz
All current ratings 1.8mA
Maximum 50 C when operating.
NBMU fitted with NB2 neon lamp (orange)NGMU fitted with NG2 fluorescent lamp (green)NWMU fitted with NW2 fluorescent lamp (blue)See Data Sheet 201/2 for spare lamp data
E10 Miniature Edison Screw - MES
Use JY, H or X Series housings and lenses.See Data Sheet 200. NBMU’s screw onto housings.
M3.5 cable clamp with fixed terminal covers to IP20See Data Sheet 209/2 for neon indicators with soldertab terminals.
ABS/Polycarbonate, flame retardant UL94VO non drip
NBMU’s conform to BS EN 60947-5-1CE labelled in conformance with the L.V. Directive.
28g
Mounting
Terminations
Construction
Optional Extras
To find the correct Product Code forordering, please turn to the reverse side.
NBMU Indicator Body and Neon Lamp(Lens/Housings are optional)
CONNECTIONSNWMU/VOLTAGE/4NGMU/VOLTAGE/4NBMU/VOLTAGE/4
35 mm
L
N
42 mm
NBMU NGMU NWMU
L
N
Product Data Sheet 206/1 Issue 3
www.tranilamp.co.uk
Neon/Fluorescent Indicator
'N'Type
100/120V
220/240V
400/440V
Miniature Bayonet Cap (BA9s) - MBC
3.5mm captive cable clamp with cover. See Data Sheet 209/2 for neon indicators withSolder tab terminals.
Body / Input / Cap / 4 Type Volts Type
Indicator Body Lamp Product Code
(if applicable)
Lens Colour(see Product Data Sheet 200)
Lens Housing /
Example 1Product Code:- NGMU/240/MBC/4
NGMU Lamp bodyNG2 MBC green fluorescent lampInput: 240V AC.
Example 2Product Code:- FHA/NBMU/110/4 White
NBMU Lamp bodyNB2 MES neon lampmounted on an FH housingFA white lens.Input: 110V AC.
NBMU
NGMU
NWMU
110
240
440
-
4
BODY
LAMP CAPS
TERMINATIONS
Miniature Edison Screw (E10) - MES
MBC
Standard Voltage
Optional Voltage
Indicator Body withNB2 neon lamp (orange)
Indicator Body withNG2 fluorescent lamp (green)
Indicator Body withNW2 fluorescent lamp (blue)
How to derive the correct Product Code
INPUTVOLTAGES
Product Data Sheet 206/2 Issue 3
www.tranilamp.co.uk
Neon/Fluorescent Indicator
'N'Type
NBMU Use white, clear, red or amber lens only
NGMU Use green lens only
NWMU Use blue lens only
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]
Product Data Sheet 207/1 Issue 3
www.tranilamp.co.uk
20
7
IRMU RMU
Indicator forDC Supplies
Tranilamp IRMU's & RMU's
Indicator lamp body units for use withDC Supplies only.
Types
Input Voltages
Surrounding Air Temperature
Lamps
Lamp Cap
MountingUse
Terminations
Construction
IRMU - with internal resistor (2W or less).RMU - with external resistor (greater than 2W) .Type used is determined by Supply Voltage, Lamp Voltage and Lamp type selected.
24,50,110V DC. Other voltages on application.
Maximum 50 C when operating.
Select from Lamp list on page 2.
E10 Miniature Edison Screw - MES
JY, H or X Series housings and lensesSee Data Sheet 200. IRMU's & RMU's screw onto housings.
M3.5 cable clamps with fixed terminal covers to IP20 on IRMU's. RMU terminals are uncovered.
ABS/Polycarbonate, flame retardant UL94VO non drip
Optional Extras
Lamp Caps
Terminal Protection
Protection to IP65
BA9s Miniature Bayonet Cap - MBC
Shrouds cannot be fitted to RMU's.
Additional seals may be necessary for housings and lenses. See Data Sheet 200.
Standard Specification
Can use with a selection of Tranilamp's range of: Filament lamps LED cluster lamps
DC Voltages can be directly connected to the unit. In the event of a lamp failure theseindicators limit the degree of potential overloadon devices within the power supply.
provide a safe solution
enable a choice of lamps
Tests
Weight (Body Only)
IRMU's and RMU's conform to BS EN 60947-5-1.CE labelled in conformance with L.V. Directive.
IRMU - 33gRMU - 37g
IRMU IndicatorBody and Lamp
Lens/Housingsare optional
CONNECTIONS
CONNECTIONS
To find the correct Product Code for ordering, please turn to the reverse side.
IRMU
+
+
-
-
External resistor
RMU
35 mm
No
Cover
+
-
35 mm
+
-
IRMU/LED4/VOLTAGE/4IRMU/LED7/VOLTAGE/4IRMU/VOLTAGE/4
RMU/LED4/VOLTAGE/4RMU/LED7/VOLTAGE/4RMU/VOLTAGE/4
48 mm
75 mm
RMU with external resistor
Product Data Sheet 207/2 Issue 3
www.tranilamp.co.ukIRMU RMU
Indicator forDC Supplies
Internal Resistor Lamp Body
External Resistor Lamp Body
Body / Lamp / DC / Cap / 4 Type Type Supply Type
Indicator Body Lamp Product Code
/
How to derive the correct Product Code
IRMU
RMU
BODY
Lens Housing(See Product Data Sheet 200)
(Resistor below 2W)
(Resistor above 2W)
(If applicable)
Lens Colour
Example 2Product Code:- FHA/RMU/50/4 White
RMU Indicator lamp body24V 50mA MES filament lampmounted on an FH housingFA white lens.Supply: 50V DC.
Example 1Product Code:- IRMU/LED4A/110/MBC/4
IRMU Indicator Lamp bodyLED4 Amber 24DC 20mA MBCSupply: 110V DC.
Standard Voltagesavailable
24V
50V
110V
Miniature Edison Screw (E10) - MES
Miniature Bayonet Cap (BA9s) - MBC
IRMU - 3.5mm captive cable clamp with cover
RMU - 3.5mm captive cable clamp with no cover
24
50
110
-
MBC
4
INPUTVOLTAGES
LAMP CAPS
TERMINATIONS
LED7 Cluster
LED4 Cluster
LEDM1 Single LED lamp
Filament Lamp
RED
AMBER
GREEN
BLUE
WHITE
RED
AMBER
GREEN
BLUE
WHITE
-
LED7R
LED7A
LED7G
LED7B
LED7W
LED4R
LED4A
LED4G
LED4B
LED4W
LEDM1R
LEDM1A
LEDM1G
LEDM1B
LEDM1W
LAMP
RED
AMBER
GREEN
BLUE
WHITE
Many combinations of input and lamp voltages exist for this product.
The IRMU with the internal resistor is limited to a maximum heat dissipation of 2W. Above that the RMU has to be used.
Where possible, the IRMU will always be supplied in preference.
From the tables, first select the type of lamp needed, then the DC supply (input) voltage. If LEDs are required, a colour will also have to be selected.
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]
Product Data Sheet 208/1 Issue 3
www.tranilamp.co.uk MimicsLED Mimic Housings and Indicators
LED MIMIC INDICATORS
HOUSING ASSEMBLIES WITH FLAT CLEAR LENSInterchangeable housings for LED lamp body units shown below. Housings meet IP64 as standard.
IP65 with sealing washers available for all except DYD, DYKD and MHAD.
Bezels nickel plated except MKYD, FKYD and DKYD which are black plastic.
FHLD 22.5 mm
24, 110, 240V AC24, 110, 130V DC
-Red/Green Standard
-Combinations of
Red, Yellow, Greenare optional
-2 built in supplies
DTSEMMU/DC
available
with test facility
DTIRMURGY/DC
available
with test facility
24V AC24V, 110, 130V DC
-Red/Yellow/Green
Standard-
Combinations of Red,Yellow, Green, Blue
or White optional-
3 built in supplies
24, 110, 240V ACor 24V DC
-LED colours Red,
Yellow, Green, Blueor White
-Two colouravailable
-Other voltageson application
CONNECTIONS
SEMPMU/ AC or DC VOLTAGE/4
SEMMU/ AC or DC VOLTAGE/4SEMAPHORE
LED INDICATOR
35 mm
35 mm
35 mm
This unit has been designed to give visual open or closed indication ofvalves or gates and can be used as a separate bicolour unit on mimic panels.Colours: Red / Green standard.Red, Yellow or Green are optional.
CONNECTIONS
CONNECTIONS
ROTMU/ AC VOLTAGE/4 - UP TO 440V AC
LMURGY/ AC or DC VOLTAGE/4
IRMURGY/110DC/4
IRMURGY/130DC/4
ROLMU/ AC or DC VOLTAGE/4 - UP TO 30V
THREE COLOUR
LED INDICATOR
ROTATING
LED INDICATOR
61 mm
67 mm
67 mm
This unit has separate inputs to each LED to allow one, two or three colours to be on at once.Colours: Red / Yellow / Green standard.Other colours / voltages on application.
This indicator consists of a cluster of 8
LED's mounted symmetrically around a
central one.
The peripheral LED's are lit in sequence.
This gives the appearance of a moving
light orbiting a fixed central point.
Clockwise std, anticlockwise available.
The unit can be supplied with an external
potentiometer to control the rotational
speed of the peripheral LED's.
MHAD 19 mmMJD 19 mm
FJD 22.5 mm
MYD 19 mm
FYD 22.5 mm
DYD 30.5 mm
MKYD 19 mm
FKYD 22.5 mm
DKYD 30.5 mm
R
R
Comm
Comm
G
G Y
Input Voltages
Input Voltages
Input Voltages
15.5 mm
Lens16 mm
Lens24 mm
Lens24 mm
Lens24 mm
Lens15 mm
15.5 mm
15.5 mm
20
8
24, 110, 240V 50/60Hz
24V DC
-LED1F 12V DC
Red, Green, Amber-
MES standardMBC optional
-LED1F 12V DC
Red, Green, Amber-
MES standardMBC optional
440, 550V 50/60Hz
110V DCOthers on application
CONNECTIONS
CONNECTIONS
FACTMU/LED1F/VOLTAGE/4 Colour
FDCIRMU/LED1F/24/4 Colour FDCIRMU/LED1F/110/4 ColourLOW VOLTAGE DC
FLASHING LED
TRANSFORMER
FLASHING LED
65 mm 35 mm
35 mm50 mm 59 mm
FLASHING LED
INDICATORS
Flashing rate nominally 2Hz.
-
Housings:- see Data Sheet 200.
-
MES standard MBC optional extra.FDCIRMU Indicator Body and LED
(without Lens/Housing)
(+)
(-)
Product Data Sheet 208/2 Issue 3
www.tranilamp.co.ukFlashing IndicatorsPower Failure Alarm
F PFTMUSeries
POWER FAILURE INDICATOR or ALARM
24, 110 or 240V 50/60Hz MES standard MBC optional
Filament lamp 6V 1.8W
LED4, LED7 or LEDM1 4.5V AC - See Data Sheet 201
Audible Alarm 6V
OptionsInput Voltages
Input Voltages
Input Voltage
Optional Voltages
Optional Voltages
This indicator, which incorporates a relay, provides a warning when the normal Control Circuit Power Supply fails. The unit requires a Permanent Live Signal, if the Circuit Supply fails the indicator illuminates or sounds the alarm. The Control Circuit at all times remains isolated fromthe Permanent Live Supply.
PFTMUPFTMU/VOLTAGE/4 PFTMU/LED7/VOLTAGE/4 PFTMU/LED4/VOLTAGE/4 CONNECTIONS
67 mm 35 mm
SIG COMM
LIVE
LIVE
SIG
COMM
(PERMANENT)
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]
20
8
Product Data Sheet 209/1 Issue 3
www.tranilamp.co.uk
LMRSingle LED Indicator
Housings: Nickel plated brass Black optional
Voltages set by in-built resistorInput:
A distinctive quality range of panel mounting single LED indicators.
Standard Specification
20
9LMR6LMR10LMR12
LMR12/Voltage/3(LEADS approx 290mm long)
LMR10/Voltage/6( WIRE END )
LMR10/Voltage/3(LEADS approx 290mm long)
LMR6/Voltage/6( WIRE END )
LMR6/Voltage/3(LEADS approx 290mm long)
9.25
9.25
6.2
6.2
Bo
dy
Bo
dy
Bo
dy
Vo
ltag
e
Vo
ltag
e
Vo
ltag
e
Term
inals
Term
inals
Term
inals
Co
lou
r
Co
lou
r
Co
lou
r
Panel Hole Diamter 12.7mm (1/2") 9.5mm (3/8") 6.4mm (1/4")
Concave Bezel LMR12 LMR10 LMR6
N/A
N/A N/A
N/A N/A
N/A N/A
SupplyVolts
AC
3 3
12AC 12AC 12AC
24AC 24AC 24AC
50AC
110AC
12DC 12DC 12DC
24DC 24DC 24DC
50DC
A A
G G G
R
B
W
R
B
W
R
B
W
3
6 6
Flying Leads
12
24
50
110
12
24
50
Amber
Green
Red
Blue
White
Wire Ends
DC
Terminals
LEDColour
Dimensions
Options IP65 Add seals - Specify: "IP65" Not available Not available
Black Black epoxy coating available on all bodies. Specify: "Black"
Ultra Bright Ultra Bright Diodes can be fitted on all sizes. Specify: "Ultra Bright"
Special Volts Non-standard supply voltages will be considered on application.
LMR12 LMR10 LMR6
16 13
1316
3 2
23
11 8
811
12.5
4
16
ThreadDiameter
ThreadDiameter
ThreadDiameter
ThreadDiameter
ThreadDiameter
Weights g
LMR12/-/3 15
LMR10/-/6 7
LMR10/-/3 10
LMR6/-/6 3
LMR6/-/3 5
Product Code Make-up
Bo
dy
Vo
ltag
e
Term
inals
Co
lou
r
e.g. LMR10/24DC/ 6 / R
A
Flying Lead Colour Codes12VAC = black/blue, 24VAC = black/orange, 50VAC = black/black, 110VAC = black/white
6VDC = red(+)/black, 12VDC = red(+)/blue, 24VDC = red(+)/orange, 50VDC = red(+)/white
26
Product Data Sheet 209/2 Issue 3
www.tranilamp.co.uk
Low Voltage Indicator
Legend Plates
Housings:
Terminations:Lamps:
BodyHousing Lamp Terminals Colour
Options
MHA/LMU/MES/2
MHC/LMU/MES/2
MBC same weight
LMU/MES/2
A low direct voltage, low cost range of lamp holderswith changeable lenses and lamps.
Standard Specification
Product Code Make-up
.187 (5 mm)Tabs
MALens
MCLens
25
40 44
LMU/MES/2
LMU/MES/2 with MHA
Housing/Lens
LMU/MBC/2with MHC
Housing/Lens21
21
4
Housing/Body/Lamp/Terminals/Colour
Examples:-
1. MHC/LMU/LED7R 24AC MES/2/R2. LMU/MES/23. MHA/LMU/24V 1.2W MBC/2/W
eg MHA/LMU/24V MES/2/R
BA9s Miniature BayonetCap - MBC available.Specify as above.
All LMU/MES/2 and LMU/MBC/2bodies will fit any housing onData Sheet 200.
MHA
LMU
MES
MBC
2
Product Codeof lamp
see Data Sheet 201
MES
MBC
Lamps only supplied as extras.Select any type from Data Sheet 201and enter its Product CodeMaximum Voltage: 240V AC - (neons only)
If no lamp requiredspecify Cap type. Optional
Solder Tabs .187 (5mm)Terminations
MH Housing c.w. MA Lens
Body Only
LMU/MES/2
LMU/MBC/2
Weight g Dimensions
MHA/LMU/MES/2
= Amber= Blue= Green= Red= Clear = White
ABGRCW
Nickel plated brass.See Data Sheet 200 for full rangeSolder Tabs .187 (5mm).Filament, LEDs and neons MES or MBC optional.See Data Sheet 201Lamps are changed from the front.
MHLP
FHLP - 22.5mm
- 19mm
25
35
LHLP
DHLP - 30.5mm
- 26.5mmFHLG - 22.5mm
3030
4545
LEGEND PLATESBlack Anodised Aluminium - Engraved to order. For H Series Housings
20
9
Tranilamp Ltd, Place Farm, The Street, Ingham, Bury St. Edmunds IP31 1NQ 01284 767055 [email protected]