BELOW ARE SOME EXAMPLES OF MANY TRUSSES … · below are some examples of many trusses available through ... room-in-attic trusses require job site delivery. job site deliveries require

EFFECTIVE APRIL 1, 2007 FAX # 715-876-5565 SECTION B, PAGE 1

TRUSS PLANT

WE FEATURE:IN HOUSE DESIGN AND ESTIMATING QUALITY ASSURANCE INSPECTIONSPROFESSIONAL ENGINEERING QUALITY WORKMANSHIPCOMPUTER ASSISTED MANUFACTURING QUALITY MATERIALS

MIDWEST MANUFACTURINGʼS TRUSS PLANT IS ONE OFTHE LARGEST TRUSS PLANTS IN THE MIDWEST.

BELOW ARE SOME EXAMPLES OF MANY TRUSSES AVAILABLE THROUGHMIDWEST MANUFACTURING.

FOR MORE INFORMATION ON TRUSSES, REFER TO THE TRUSS TRAINING MANUAL IN THIS CATALOG.

FAX NUMBER 715-876-5565.

WOOD WEB WOOD AND METAL WEB

SECTION B, PAGE 2 FAX # 715-876-5565 EFFECTIVE APRIL 1, 2007

DESIGN SERVICES

FAX NUMBER 715-876-5565.

*LAYOUT AND SEALED PRINT FEES ARE REFUNDABLE UPON PURCHASEOF SPECIAL ORDER TRUSS PACKAGES. REFUND DOES NOT APPLY TO

TRUSSES AVAILABLE FOR PROMPT SHIPMENT.

SEALED PRINTSTRUSS PRINTS WHICH ARESEALED AND CERTIFIED BY APROFESSIONAL ENGINEERARE AVAILABLE UPONREQUEST. IF THE TRUSS HASNOT BEEN ORDERED A SEALEDPRINT FEE IS REQUIRED*.PLEASE INDICATE WHICHSTATE SEAL IS REQUIREDWHEN ORDERING.

USE SEALED PRINT FEESKU #187-9984


ORDERING INFORMATION

FAX NUMBER 715-876-5565.

EACH SPECIAL ORDER CONTRACT MUST INCLUDE THE FOLLOWING:

1. SPECIAL ORDER CONTRACT NUMBER (S.O.C.#)2. TRUSS TYPE (COMMON, END, SCISSORS)3. PITCH (4/12, 5/12, 6/12)4. ON CENTER SPACING (24”, 9ʼ)5. OVERHANGS (12”, 24”)6. LOADING (50#, 60#, 29#)7. QUANTITIES FOR EACH TRUSS8. GUEST SIGNATURE9. DEPOSIT OR PAID IN FULL

JOBSITES:ODD SPAN:ODD PITCH:CANTILEVERS:SCISSORS:BEARINGWALLS:HEEL HEIGHTS:CHANGES:PROMPT SHIP:

CUSTOM BUILD:

ALL JOBSITES REQUIRE PAID IN FULL AND JOBSITE DIRECTIONS BEFOREWE CAN BEGIN BUILDING THE TRUSSES.

ODD SPAN TRUSS QUOTE REQUESTS SHOULD BE FAXED TO THEMIDWEST MANUFACTURING TRUSS PLANT. FAX #715-876-5565

ODD PITCH TRUSSES QUOTE REQUESTS SHOULD BE FAXED TO THEMIDWEST MANUFACTURING TRUSS PLANT . FAX #715-876-5565

IF THERE IS A CANTILEVER CONDITION, PLEASE NOTE IF IT IS ON ONE SIDEOR BOTH. GIVE SPAN OF OVERALL TRUSS AND CANTILEVER LENGTH.

BEARING WALL SIZE MUST BE GIVEN (2X4 OR 2X6).

INDICATE PLACEMENT OF INTERIOR BEARING WALLS AND BEARING WALLSIZE.

SPECIFY IF HEEL HEIGHTS ARE SUPPOSED TO MATCH WHEN ORDERINGMORE THAN ONE TYPE OF TRUSS.

WHEN CHANGING SPECIFICATIONS ON A TRUSS, A REVISED SPECIALORDER CONTRACT NOTING THE CHANGE MUST BE FAXED.

PROMPT SHIP TRUSSES ARE IN STOCK READY TO SHIP AT THE TRUSSPLANT, AVAILABLE FOR SHIPMENT ON THE NEXT DELIVERY TO THESTORE.

TRUSSES BUILT PER INDIVIDUAL ORDER, SUBJECT TO CURRENT PRODUC-TION TIME.

FOR MORE INFORMATION ON TRUSSES, REFER TO TRUSS TRAINING MANUAL IN THIS CATALOG.


ORDERING EXAMPLES

FAX NUMBER 715-876-5565.

1. 34ʼ SCISSORS, 4/12 OVER 2/12, 2ʼ OVERHANGS, 2ʼ ON CENTER, 60# TOTAL LOAD,2X6 BEARING WALL, STANDARD 4” HEEL

2. 24ʼ COMMON, 4/12, 2ʼ ON CENTER, 3ʼ OVERHANGS, 30-10-10# LOADING

3. 18ʼ DROPPED END, 3/12, DROPPED FROM STANDARD 4” HEEL FOR 2X4 LADDERSET

4. 28ʼ GIRDER TRUSS, 6/12, 20ʼ TIE-IN-SPAN, HEEL TO MATCH PROMPT SHIP COMMONPLEASE SPECIFY WHAT GIRDER TRUSS WILL CARRY AND LOCATION OF ANY CONCENTRATED LOAD.

5. 23ʼ-1 3/4”, 4X2 BCB-FLOOR, 18” DEEP, 19.2” ON CENTER, 55# LOAD, 1ʼ CANT ONESIDE.

6. 21ʼ AGRI REGULAR, 3/12, 9ʼ ON CENTER, 24-4-1 # LOAD.AGRI TRUSSES ARE NOT BUILT WITH OVERHANGS

TYPICAL DESIGN LOADS:RESIDENTIAL

ROOF: 20-10-10=40#, 30-10-10=50#, 40-10-10=60#FLOOR: 40-10-5=55#

AGRICULTURAL20-4-1=25#, 24-4-1=29#, 24-4-5=33#, 32-4-1=37#32-4-5=41#, 30-4-1=35#, 40-4-1=45#

COMMERCIALROOF: 30-4-1=35#, 30-4-5=39#, 40-4-1=45#, 40-4-5=49#FLOOR: 40-10-5=55#, 50-10-5=65#, 80-10-5=95#,

100-10-5=115#, 125-10-5=140#

FOR MORE INFORMATION ON TRUSSES, REFER TO TRUSS TRAINING MANUAL IN THIS CATALOG.



DROPPED END

For a quote on any item not listed below fax a quote request form to Fax # 715-876-5565.

DROPPED END FRAME

PLEASE GIVE THE FOLLOWING INFORMATIONWHEN REQUESTING A DROPPED END FRAME

OR LADDER SETHEEL HEIGHT OF COMMON TRUSS FROMWHICH THE DROPPED END IS TO BE DROPPEDTHE SIZE OF THE LADDER SET TO BE USED;2X4 OR 2X6FOR ACCURATE QUOTING OF DROPPED ENDSINCLUDE THE NUMBER OF COMMON TRUSSESTO BE ORDERED

SPAN TYPE SKU#10ʼ DROPPED END 188-505912ʼ DROPPED END 188-523714ʼ DROPPED END 188-541516ʼ DROPPED END 188-559618ʼ DROPPED END 188-5774

20ʼ ^ DROPPED END 188-595222ʼ ^ DROPPED END 188-612624ʼ ^ DROPPED END 188-629826ʼ ^ DROPPED END 188-648428ʼ ^ DROPPED END 188-665830ʼ ^ DROPPED END 188-683832ʼ ^ DROPPED END 188-703134ʼ DROPPED END 188-719636ʼ DROPPED END 188-735838ʼ DROPPED END 188-751040ʼ DROPPED END 188-7675


20ʼ ^ DROPPED END 188-601622ʼ ^ DROPPED END 188-616824ʼ ^ DROPPED END 188-634626ʼ ^ DROPPED END 188-652428ʼ ^ DROPPED END 188-670230ʼ ^ DROPPED END 188-688332ʼ ^ DROPPED END 188-7086


20ʼ ^ DROPPED END 188-607422ʼ ^ DROPPED END 188-625224ʼ ^ DROPPED END 188-643026ʼ ^ DROPPED END 188-661828ʼ ^ DROPPED END 188-679930ʼ ^ DROPPED END 188-693532ʼ ^ DROPPED END 188-713834ʼ DROPPED END 188-7293

Dropped ends listed are constructed to accept a 2x4 ladder set,attaching to a standard 4” heel common.

4/12 5/12 6/12^ IN STOCK FOR PROMPT SHIPMENT

Dropped ends & ladder sets are used to obtain a gable overhang, most often 2ʼ or more.Using a ladder set requires the use of a dropped end frame. The dropped end frame willbe dropped (lowered) to the bottom edge of the lookouts on the ladder set. The ladderset will sit on top of the dropped end frame so it sits flush with the first common truss.

The ladder will be nailed to the first common truss.



LADDER SET

LADDER SET

ALL ITEMS LISTED ABOVE ARE SHOWN AT LIST PRICE.IN ORDER TO ACHIEVE STORE COST MULTIPLY THE LIST PRICE BY .FH

LADDER SET BUILT FOR 24” OVERHANG2X4 LADDER SET $4.52/PER LINEAL FT OF TRUSS SPAN2X6 LADDER SET $5.75/PER LINEAL FT OF TRUSS SPAN

PLEASE GIVE THE FOLLOWING INFORMATION WHEN REQUESTINGA LADDER SET

THE SPAN & PITCH OF COMMON TRUSSES WITH WHICH THELADDER SET WILL BE USED.

THE SIZE OF THE LADDER SET TO BE USED; 2X4 OR 2X6

THE EAVE & RAKE OVERHANG DESIRED

LADDER SET

COMMON TRUSS

DROPPED END FRAMELADDER SET SITS ON TOP OF

DROPPED GABLE END

LOOKOUT2X4 or 2x6

PRICE OF LADDER SET DOESNOT INCLUDE COMMONTRUSS OR DROPPEDEND FRAME.

DROPPED ENDFRAMES

Dropped ends & ladder sets are used to obtain a rake overhang up to 2ʼ. A longer rake overhangcan be obtained, but MM Truss must be contacted for specifics. Using a ladder set requires theuse of a dropped end frame. The dropped end frame will be dropped (lowered) to the bottom

edge of the lookouts on the ladder set. The ladder set will sit on top of the dropped end frame so itsits flush with the first common truss. The ladder will be nailed to the first common truss.

LADDER SET ISNAILED TO FACE OF

FIRST COMMON TRUSS.

DROPPED END FRAMES DONOT HAVE OVERHANGS.



SCISSORS

4/2/12, 5/2.5/12, & 6/3/12 SCISSORS

LLTC=LIVE LOAD TOP CHORD (SNOW LOAD) = 42DLTC=DEAD LOAD TOP CHORD (ROOFING MATERIAL) = 10LLBC=LIVE LOAD BOTTOM CHORD (ATTIC STORAGE) = 0DLBC=DEAD LOAD BOTTOM CHORD (CEILING MATERIAL) = 10

TOTAL 62# PSF

2ʼ O.C. SPACING2ʼ OVERHANGS

BEARINGWALL SIZE

3 1/2” seat cut to matchbearing wall3 1/2” bearing wall width

THE BEARING WALL SIZE IS REQUIREDBEFORE SCISSOR TRUSS ORDERS CAN

BE PROCESSED.

^ IN STOCK FOR PROMPT SHIPMENT* 4” BEARINGUSP HANGER RECOMMENDATION

DESCRIPTIONS SKU#SCISSORS (TWO PER TRUSS)SCISSORS CLIP FOR 2X4 B.W. 227-1280SCISSORS CLIP FOR 2X6 B.W. 227-1293NOTE: HANGERS ARE NOT INCLUDED (AVAILABLE IN HARDWARE DEPT.)

SPAN TYPE SKU#10ʼ SCISSOR 188-450012ʼ SCISSOR 188-451414ʼ SCISSOR 188-4528

16ʼ SCISSOR 188-454218ʼ SCISSOR 188-455620ʼ *SCISSOR 188-4570

22ʼ ^ *SCISSOR 188-458424ʼ ^ *SCISSOR 4” BEARING 188-459824ʼ ^ SCISSOR 6” BEARING 188-459926ʼ ^ *SCISSOR 4” BEARING 188-461026ʼ ^ SCISSOR 6” BEARING 188-461128ʼ ^ *SCISSOR 4” BEARING 188-462228ʼ ^ SCISSOR 6” BEARING 188-462330ʼ ^ *SCISSOR 188-4634

SPAN TYPE SKU#10ʼ SCISSOR 188-450412ʼ SCISSOR 188-451814ʼ SCISSOR 188-453216ʼ SCISSOR 188-454618ʼ SCISSOR 188-456020ʼ *SCISSOR 188-4574

22ʼ ^ *SCISSOR 188-458824ʼ ^ *SCISSOR 188-460226ʼ ^ *SCISSOR 188-461428ʼ ^ *SCISSOR 188-462630ʼ ^ *SCISSOR 188-4638

SPAN TYPE SKU#10ʼ SCISSOR 188-450812ʼ SCISSOR 188-452214ʼ SCISSOR 188-453616ʼ SCISSOR 188-455018ʼ SCISSOR 188-456420ʼ *SCISSOR 188-4578

22ʼ ^ *SCISSOR 188-459224ʼ ^ *SCISSOR 188-460626ʼ ^ *SCISSOR 188-461828ʼ ^ *SCISSOR 188-463030ʼ ^ *SCISSOR 188-4642

4/2/12 5/2.5/12 6/3/12



GABLE & GAMBREL ROOM-IN-ATTIC


TOTAL 74# PSF

2ʼ O.C. SPACING40# Live Load Applied to Bot-tom Chord in Room Area Only

ROOM IN ATTIC

^^

SPREAD WEB STORAGE TRUSSES CAN BE USED WHEN STOR-AGE SPACE IS NEEDED. THE BOTTOM CHORD IS DESIGNEDTO CARRY A 25 LB. PER SQ. FT. LIVE LOAD. FOR INFORMA-TION SEE SECTION B, PAGE 10.

^ IN STOCK FOR PROMPT SHIPMENT

slope varies with room size

Warning: Stairway openingmay require 2-ply girders andhand framing. Please ask guesthow they plan to enter their attic.Stairwell along the stud wall endof building requires one 2-plygirder; towards the center ofroom requires two 2-ply girders.

NOTE: ROOM-IN-ATTIC TRUSSES ARE USUALLY NOT BUILTWITH OVERHANGS DUE TO TRANSPORTATION PURPOSES.SELECTED ROOM-IN-ATTIC TRUSSES MAY HAVE ON OVER-HANG, MUST CHECK WITH MM TRUSS AT TIME OF PUR-CHASE.OVERHANGS MAY BE HANDFRAMED, ADDED IN THEDESIGN-IT CENTER OR OVERHANG JACKS PURCHASED(SEE SECTION D, PAGE 3).ROOM-IN-ATTIC TRUSSES REQUIRE JOB SITE DELIVERY.JOB SITE DELIVERIES REQUIRE JOB SITE DIRECTIONSAND MUST BE PAID IN FULL.



SPREAD WEB

2ʼ OC SPACING; 2ʼ OVERHANGS2X3 & 2X4 WEBS;

2X4 TOP &2X6 BOTTOM CHORDS

4/12, 5/12, 6/12 SPREAD WEB STORAGE


TOTAL 87# PSF

USP HANGER RECOMMENDATIONDESCRIPTIONS SKU#

COMMON (TWO PER TRUSS)TRUSS TIE FOR SINGLE PLATE 227-3288TRUSS TIE FOR DOUBLE PLATE 227-1646

SPREAD WEB STORAGE TRUSSES CAN BE USED WHEN STORAGE SPACE IS DESIREDWITHIN THE TRUSS. THE ENTIRE BOTTOM CHORD OF A SPREAD WEB STORAGETRUSS IS LOADED WITH 25 PSF LIVE LOAD. THE CENTER WEBS OF THE TRUSS ARESPREAD APART TO ALLOW THE LARGEST POSSIBLE OPENING IN THE CENTER OF THETRUSS. (SEE ILLUSTRATION BELOW)

NOTE: THE SPREAD WEB STORAGE TRUSSES LISTED BELOW HAVE STD 4” HEELS,AND WILL MATCH UP TO RESIDENTIAL PROMPT SHIP COMMONS, GABLE ENDS, ANDSCISSORS.

ACTUAL WEB PATTERN MAY VARY DIMENSIONS OF CENTER OPENINGS ARE APPROXIMATE

SPAN SKU#20ʼ 2ʼ 6”x9ʼ 9” 188-961522ʼ 3ʼ 0”x11ʼ 0” 188-967324ʼ 3ʼ 4”x12ʼ 0” 188-973826ʼ 3ʼ 8”x11ʼ 0” 188-979628ʼ 4ʼ 0”x10ʼ 8” 188-985130ʼ 5ʼ 0”x10ʼ 8” 188-9916

SPAN SKU#20ʼ ^ 3ʼ 6”x10ʼ 0” 188-963122ʼ ^ 3ʼ 11”x11ʼ 9” 188-969924ʼ ^ 4ʼ 4”x12ʼ 0” 188-975426ʼ ^ 4ʼ 9”x12ʼ 4” 188-981928ʼ ^ 5ʼ 2”x12ʼ 6” 188-987730ʼ ^ 5ʼ 7”x12ʼ 6” 188-9932

SPAN SKU#20ʼ ^ 4ʼ 4”x11ʼ 4” 188-965722ʼ ^ 4ʼ 10”x12ʼ 4” 188-971224ʼ ^ 5ʼ 4”x13ʼ 0” 188-977026ʼ ^ 5ʼ 10”x13ʼ 0” 188-983528ʼ ^ 6ʼ 4”x13ʼ 0” 188-989330ʼ ^ 6ʼ 10”x13ʼ 0” 188-9958

4/12 5/12 6/12

W

H

Center Opening (H,W) Center Opening (H,W) Center Opening (H,W)

^ IN STOCK FOR PROMPT SHIPMENT

Warning: Stairway opening may require2-ply girders and hand framing. Please askguest how they plan to enter their attic.Stairwell along the stud wall end of buildingrequires one 2-ply girder; towards the centerof room requires two 2-ply girders.


VALLEY SETS


Valley Sets are used to form the ridge line and framing between the main roof and secondaryroof structures. Valley sets can also be used for decorative gables, and dormers over porchesand entrances. Valley trusses may be set directly on top of the trusses on the main roof.Sheathing is not necessary under the valley trusses.

VALLEY SET INCLUDES SPAN 4/12 5/12 6/121 TRUSS EACH: 4ʼ, 8ʼ & 12ʼ 16ʼ

18ʼ20ʼ22ʼ24ʼ26ʼ28ʼ30ʼ32ʼ

188-8548188-8603188-8661188-8726188-8784188-8849188-8904188-8962188-9026

188-8551188-8616188-8674188-8739188-8797188-8852188-8917188-8975188-9039

188-8580188-8645188-8700188-8768188-8823188-8881188-8946188-9000188-9068

1 TRUSS EACH: 2ʼ, 6ʼ, 10ʼ, & 14ʼ1 TRUSS EACH: 4ʼ, 8ʼ, 12ʼ, & 16ʼ1 TRUSS EACH: 2ʼ, 6ʼ, 10ʼ, 14ʼ, & 18ʼ1 TRUSS EACH: 4ʼ, 8ʼ, 12ʼ, 16ʼ, & 20ʼ1 TRUSS EACH: 2ʼ, 6ʼ, 10ʼ, 14ʼ, 18ʼ, & 22ʼ1 TRUSS EACH: 4ʼ, 8ʼ, 12ʼ, 16ʼ, 20ʼ, & 24ʼ1 TRUSS EACH: 2ʼ, 6ʼ, 10ʼ, 14ʼ, 18ʼ, 22ʼ, & 26ʼ1 TRUSS EACH: 4ʼ, 8ʼ, 12ʼ, 16ʼ, 20ʼ, 24ʼ, & 28ʼ

4/12 5/12, & 6/12 VALLEY SET

GIRDER TRUSSES ARE USED TO ELIMINATE THE NEED FOR AN INTERIOR LOAD BEARING WALL. THEGIRDER IS USED TO SUPPORT ONE END OF THE MAIN ROOF TRUSS AT THE INTERIOR SECTION OFTHE TWO ROOFS. THE MAIN ROOF TRUSSES THAT TIE INTO THE GIRDER ARE CARRIED ON THE BOT-TOM CHORD BY JOIST HANGERS. THE HANGER REQUIRED AND THE SIZE OF THE GIRDER DEPENDON THE NUMBER AND SPAN OF TRUSSES TO BE CARRIED.

TIE-IN-SPAN IS THE SPAN OF THETRUSSES TO BE CARRIED BY THEGIRDER TRUSS. THIS INFORMATIONIS NEEDED BEFORE ANY QUOTE ORORDER CAN BE PROCESSED.



2ʼ O.C. SPACING2ʼ OVERHANGS

4/12, 5/12, 6/12 HIP SETHIP SETS


TOTAL 62# PSF

QUANTITY OF HANGERS NEEDEDDESCRIPTION: SKU # QTYCORNER GIRDER-END JACK (HJC) 228-1717 2CORNER JACK (SKL-SKR OR MP3) 228-1911 12END JACK (JL-24) 227-1060 †TRUSS TIE FOR SINGLE OR DOUBLE PLATE 227-1646 2/TRUSS†1 HANGER PER 8ʼ JACK LESS 2 FOR HJC CONNECTION

NOTE:HIP BLOCKING FRAME (INCLUDED) ELIMI-NATES THE NEED FOR RIDGE BLOCKING

NOTE: HANGERS ARE NOT INCLUDED. THEY ARE AVAILABLE THROUGH THE HARDWARE DEPARTMENT.

HIPGIRDER

ENDJACKS

DIMINISH-ING HIP GIRDERS JACKS SPAN PITCH

4/12 5/12 6/12CORNER

1 1 0 2 4 *8ʼ 188-7824 188-7837 188-78401 2 0 2 4 *10ʼ 188-7853 188-7866 188-78791 3 0 2 4 12ʼ 188-7882 188-7895 188-79051 2 0 2 8 *14ʼ 188-7918 188-7921 188-79341 3 0 2 8 16ʼ 188-7947 188-7950 188-79631 2 0 2 12 *18ʼ 188-7976 188-7989 188-79921 3 0 2 12 20ʼ 188-8001 188-8014 188-80431 4 1 2 12 22ʼ 188-8069 188-8072 188-81081 5 1 2 12 24ʼ ^ 188-8124 188-8137 ^188-81661 6 2 2 12 26ʼ ^ 188-8182 188-8195 ^188-82211 7 2 2 12 28ʼ ^ 188-8247 188-8250 ^188-82891 8 3 2 12 30ʼ ^ 188-8302 188-8315 ^188-83311 9 3 2 12 32ʼ 188-8360 188-8373 188-8399

HIP SET DOES NOTINCLUDE FIRST COMMON

HIP BLOCKING FRAME

CORNER JACKS END JACKS

CORNERGIRDER

PLAN VIEW

DIMINISHING HIP(DROPPED)

* Does not require Hip Blocking Frame ^ PROMPT SHIP



50 4 1 55 4ʼ-0”50 5 5 60 4ʼ-0”50 4 1 55 5ʼ-0”50 5 5 60 5ʼ-0”50 4 1 55 6ʼ-0”45 5 5 55 6ʼ-0”45 4 1 50 7ʼ-0”42 5 5 52 7ʼ-0”42 4 1 47 8ʼ-0”35 5 5 45 8ʼ-0”35 4 1 40 9ʼ-0”30 5 5 40 9ʼ-0”30 4 1 35 10ʼ-0”24 5 5 34 10ʼ-0”

4/12 HEAVY-COMBO PROMPT SHIP POST FRAME TRUSSES

THE PROMPT SHIP TRUSSES SHOWN BELOW ARE DESIGNED TO CARRY A 40#LOAD AT 9ʼ O.C. WITH 90 MPH WIND LOAD RATING. THEY CAN BE USED ATDIFFERENT SPACINGS TO ACHIEVE ADDITIONAL LOADING. USE THE CHARTBELOW AS A GUIDE FOR OTHER LOADS.

IN STOCK FOR PROMPT SHIPMENTIN STOCK FOR PROMPT SHIPMENT

SPAN PITCH TRUSS END FRAME HEELSKU# SKU# HEIGHT

20ʼ 4/12 187-6738 187-7407 7-7/8”24ʼ 4/12 187-6770 187-7423 7-7/8”26ʼ 4/12 187-6783 187-7449 7-7/8”28ʼ 4/12 187-6796 187-7232 7-7/8”30ʼ 4/12 187-6806 187-7465 7-7/8”32ʼ 4/12 187-6819 187-7371 7-7/8”

36ʼ 4/12 187-6835 187-7494 7-7/8”40ʼ 4/12 187-6851 187-7614 7-7/8”

********LATERAL BRACING REQUIRED ON BOTTOM CHORD 10ʼ O.C.

90 MPH WIND RATEDMAXIMUM TOP CHORD PURLIN SPACING 16” O.C.

TRUSSES OVER 36ʼ REQUIRE JOBSITE DELIVERY

*

LLTC=LIVE LOAD TOP CHORD (SNOW LOAD)DLTC=DEAD LOAD TOP CHORD (ROOFING MATERIAL)LLBC=LIVE LOAD BOTTOM CHORD (ATTIC STORAGE)DLBC=DEAD LOAD BOTTOM CHORD (CEILING MATERIAL)

TC LL TC DL BC DL TOTAL LOAD SPACING

TRUSS PLANT

TALL WALL REQUEST FORMTRUSS PLANT


NAME: ______________________________________ADDRESS: __________________________________CITY: _____________ COUNTY: _______________STATE: ___________ ZIP CODE: ______________Daytime: (_____)______-____________Home: (_____)______-____________

PLEASE PROVIDE THE FOLLOWING INFORMATION:1. Please include this form with a fax of the wall plan.2. Please specify all rough opening dimensions if not indicated on the plans.3. Please include truss layout for roof loading on the wall.4. Show ridge beam reactions and size, if possible.

ADDITIONAL INFORMATION:

Special Notes:

DATE: _________________________________TEAM MEMBER: ______________________STORE LOCATION: ___________________STORE NUMBER: _____________________

PROJECT NAME: _____________________

End Wall DimensionsWall Width (A): _____________Eave Height (B): _____________Peak Height (C): _____________

Overhang InformationOverhang Dimension: 12", 18", 24", ____Material for Overhang: 2x4, 2x6, 2x8, ____

Truss InformationTruss Bearing (D): ___________Truss Heel (E): _____________Roof Pitch (F): _____________Truss Spacing: _____________

Surrounding Terrain

Inside Developed City

Wooded Area

Open Terrain

Lakefront

Surrounded by otherhouses

E

F

D

12

A

B

C

Documents

BELOW ARE SOME EXAMPLES OF MANY TRUSSES … · below are some examples of many trusses available through ... room-in-attic trusses require job site delivery. job site deliveries require