bel canto

Maximum Data Input Rates : 24bit Data to 192ks/s: AES, SPDIF, TOSLINK 24bit Data to 192ks/s, MQA, and DSD64: 10/100 Ethernet 24bits to 384ks/s, MQA, and DSD64/128 (DoP): USB2 AudioHHeadphone: 4.5Vrms maximum, 32ohm minimum load

MM/MC Input Sensitivity: MM: 2.5mV to 5mV; MC: 0.25mV to 0.5mVInput Load : MM: 47K ohms; MC: 50, 100, 500, 1000RIAA Accuracy : +/- 0.25dB, 50Hz-15kHzSNR : >70dB A-WeightedDynamic Range : 126dB A-weightedTHD+N : <0.001% 1kHzIMD IMD (CCIF) : <0.001%,18.5:19.5kHz 1:1

Power Output 1% THD per Channel : 400W 4 ohms, 200W 8 ohmsMinimum Load : 2 ohmsPeak Output Current : 27 amperesFrequency Response : +/-3 dB 0Hz-50KHz, all loadsTHD+N : 0.002% 1W, 1KHz, 4 ohmsOutput noise : 35uVRMS A-weighted 10Hz-20KHzVVoltage gain : 27dB (internal switches select for 33dB)

The new e1X DAC/Control Preamp, based around our High Dynamic Resolution HDR-II core and high-speed Asynchronous Multi-Input Processor (AMiP) platform is our most versatile DAC preamplifier. Stream music through Ethernet or USB, a full suite of digital inputs, line level inputs, sub output and MM/MC software controlled analog phono stage. analog phono stage.

Features include software controlled Trim, Bass EQ, and subwoofer filter management. Roon Ready or DLNA control with Bel Canto SEEK iOS APP to stream Tidal/MQA, Qobuz or your personal library.

High performance Stereo Amplifier rated conservatively at 200/400 Watts. Our custom, discrete Single Stage High-current Amplifier input and gain stages bring the magic to this amplifier.

FFeatures include gain control switch to match system gain to your speakers. Advanced power filtration enables over 1200 watts of clean power delivery to the amplifiers. Standby control from front panel or 5/12V trigger for complete system

The new e1X Integrated, Shares the DAC Control preamplifier core and functions with a custom power amplifier rated at 180/250 watts. Stream music through Ethernet or USB, or the full suite of digital inputs, line level inputs, sub output and MM/MC software controlled analog phono stage.

FFeatures include software controlled Trim, Bass EQ and subwoofer filter management. Roon Ready or DLNA control with Bel Canto SEEK iOS APP to stream Tidal/MQA, Qobuz or your personal library.

Damping factor : >500Output Impedance at 100Hz : <16 milliohmsDynamic Range : 126dBInput Voltage for Max Output : 2.3Vrms at 27dB gainInput connections : Single-ended RCA or balanced XLRRCA input impedance : 10KohmsBalanBalanced input impedance : 20KohmsOutput connections : 2 sets WBT Nextgen 5-way binding posts

24bit Data to 192ks/s : AES, SPDIF, TOSLINK24bit Data to 192ks/s, MQA, and DSD64: 10/100 Ethernet24bits to 384ks/s, MQA, and DSD64/128 (DoP): USB2 AudioHeadphone : 4.5Vrms maximum, 32ohm minimum loadInput Sensitivity : MM: 2.5Input Sensitivity : MM: 2.5mV to 5mV; MC: 0.25mV to 0.5mVInput Load : MM: 47K ohms; MC: 50, 100, 500, 1000RIAA Accuracy : +/- 0.25dB, 50Hz-15kHz

THD+N : <0.01% 1kHz A-WeightedSNR : >70dB A-WeightedDamping factor : >500Maximum Power Output : 250W-4ohm, 180W-8ohm Peak Output Current : 18 amperesFrequency Response : -3 dB 0.5Hz-50kHz, all loadsOutput Output connections : 2-pair WBT Nextgen binding postsDynamic Range : 125dB A-weightedTHD+N : <0.001% 1W, 1kHz, 4 ohms

bel canto

DAC/Control Preamp

Stereo Amplifier

Integrated

The new e1X line incorporates many ground-breaking designs from the Black series. Each e1X component is designed with great attention to detail, focusing on our unique input approach, DAC core performance and power amplifier technologies that optimize and maintain the purest signal quality. Built in a constrained layer damped chassis with high-grade aluminum defines the simple and elegant look.