Begg Cousland_Becovane Technology 2010

Embed Size (px)

Citation preview

  • 7/29/2019 Begg Cousland_Becovane Technology 2010

    1/4

    Chevron Vane Technology

    Droplet Separation

  • 7/29/2019 Begg Cousland_Becovane Technology 2010

    2/4

  • 7/29/2019 Begg Cousland_Becovane Technology 2010

    3/4

    BECOVANE CHEVRON DROPLET SEPARATORS

    The BECOVANE range of droplet seaparators are the CHEVRON type of filters which consist of a set of speciallydesigned vanes with a range of design geometries for varying applications.These mist eliminators employimpingement as the mechanism of separation

    Gas with entrained liquid droplets flows between the vanes of the BECOVANE Separator. The gas can easily takethe turns while the liquid droplets cannot follow the gas streamlines and impinge upon the walls of the vanes andcoalesce to a size where they drop down and are collected and removed.

    Vertical Flow Horizontal Flow

    CAPACITY

    The BECOVANE separators working on the inertial separation mechanism can be used efficiently over a wide gasvelocity range without a significant loss of droplet removal efficiency. Thus, for situations where wide flow rateranges are possible, the BECOVANE is a preferred choice compared to cyclonic type mist eliminators.The operating velocity is obtained by a force balance between the gravitational, drag and surface tension forces

    acting on the entrained droplets. A wide operating velocity range is possible & the capacity of the BECOVANEis only limited by the phenomenon of reentrainment of the coalesced droplets and hence the design velocity hasto be kept well below this critical velocity which leads to reentrainment.

    EFFICIENCY

    BECOVANES are largely used for the separation of coarse mist (or spray) from gases and vapours. A limit dropsize (p) is used to characterize them and it is defined as the smallest particle which can be removed to an extentof 99%. The normal (p) values for BECOVANES are in the region of 25 microns and higher. However, specialdesigns are available for applications requiring removal of particles smaller than this size.

    PRESSURE DROPDue to the large percentage of the cross section available for gas flow, the pressure drop in a vast majority ofapplications is less than 25-50mm WG. As mentioned above, for high efficiency applications, a larger pressuredrop is to be expected.

    APPLICATIONS

    Due to its constructional features, the BECOVANE has a lower tendency to fouling. Recommended areas ofoperation would therefore include:

    Applications where droplets will be sticky or viscous and will plug conventional Knitted/Fibre Bed MistEliminators.

    For systems containing certain solids it would be possible to carry out intermittent cleaning with spray nozzles.

  • 7/29/2019 Begg Cousland_Becovane Technology 2010

    4/4

    The BECOVANE mist eliminators are available in stainless steel and polypropylene as standard materials ofconstruction. Other materials can be manufactured upon request.

    The BECOVANE BCVH-01 mist eliminator is designed for horizontal gas flow. In this configuration, speciallydesigned sinusoidal vanes having a provision for a phase separation chamber are employed. The gas flow issplit by these vanes and the entrained liquid particles are driven by inertial forces to the walls in the phaseseparation chambers. Re-entrainment is avoided as a separate liquid drainage path is provided in the phaseseparation chamber.

    BECOVANE PERFORMANCE DATA

    3 STAGE VANE 2 STAGE VANE

    Successful areas of application include Evaporators, Exhaust Air Cleaning, Chemical Process Equipment,Air Conditioning & Steam Drying, Air Intake Systems, Natural Gas Operations, etc.

    BECOVANE CONCEPTS WITH HORIZONTAL GAS FLOW

    Begg Cousland & Co. Ltd.

    Studio 3, Doges

    Templeton on the Green62 Templeton StreetGlasgow G40 1DAUnited Kingdom

    Tel + 44 141 556 5288

    Fax + 44 141 554 7447

    E-mail : [email protected]

    Web : www.beggcousland.com