i|Üz|Ç|t dâ|Äà|Çz? \ÇvA

Bedspreads - Draperies – Accessories Custom Catalog

Custom Residential & Commercial Fabricators

Custom Division

Virginia Quilting, Inc. 100 South Main Street, P.O. Box 99

La Crosse, VA 23950 Phone: (434) 757-1809 Fax: (434) 757-1855

(800) 757-1856 Website: www.virginiaquilting.com Email: sales@virginiaquilting.com

Commercial Division VQC, Inc.

One Northside Ind. Park South Hill, VA 23970 Phone: (434) 447-5091 Fax: (434) 447-5095

Website: www.vqcinc.com

VIRGINIA QUILTING STAFF

John Wesley McAden, Jr., President

Mary McAden, Vice-President Sales/Customer Service

Cindy Clevinger, Plant Manager

Tina Lehman, Assistant Plant Manager

Accounting Office Kristin Sutton, Manager

Joyce Tharpe, Accounts Receivable

Department Supervisors Odessa Rogers, Accessory Supervisor

Sabrina Dulaney, Bedding and Outline Quilting Supervisor Jackie Hershey, Drapery Supervisor

Terry Lehman, Window Treatment Supervisor Faye Evans, Swags and Woodworking Supervisor

John Cotton, Multineedle Supervisor

Personnel Office Kristin Sutton, Human Resources Manager

TERMS AND CONDITIONS New Accounts New clients wishing to open an account must send a retail sales tax certificate filled out in its entirety and a complete credit application provided by VQI. Term/Rated Accounts Our terms are net 30 days after invoice date on approved accounts. All invoices must be paid within 30 days. An account over 30 days is subject to C.O.D terms. Balances will be charged 1.5% per month or 18% annually. Any account with an invoice over 60 days that has a work order in house can be held for payment or shipped C.O.D plus back balance. Payment Methods We now offer the flexibility to approved customers to use Discover, MasterCard or Visa for paying your account balance. Orders We require a written work order for all items we process. We prefer that you use our work orders as they were designed to give us all necessary information when filled out completely. Please check the work orders carefully before you send them, as it will save time in processing your order. All items will be produced according to standard specifications stated in the catalog unless you note otherwise on your order. Products not listed in catalog will be priced at current VQI rates. Order Questions Questions on orders should be addressed to a customer service representative who will answer your question directly or route you to the appropriate VQI personnel. Order Changes and Cancellations We require order changes and cancellations to be in writing. If order is in production when change or cancellation is requested, a handling fee of $25.00 per item for each change or cancellation will be added to your invoice. In addition, time and materials will be charged as required to make the requested change or cancellation.

Rush Orders When you need faster service, we provide you with priority order program. For a shipment of standard items two days after receipt of fabric with complete and correct work order, please mark your order as “2- DAY RUSH”. A fee of 50% of your order value will be added to your invoice for this service. To guarantee rush service, call the appropriate department head before you send in your order. You will need to have information about the arrival date of your work order and fabric, as well as, the desired ship date. Shipment Projected shipment of standard items is two to three weeks after receipt of fabric with complete and correct work order. Projected shipment of custom items, which may require a pattern or sample fabrication, is normally six to eight weeks upon receipt of fabric, pattern and completed correct work order. In the event sample fabrication is required , time and material costs incurred will be charged to your account. Merchandise is shipped F.O.B LaCrosse, VA. All packages that are shipped by FedEx are insured for the standard $100.00 provided by FedEx. If additional coverage is required, please indicate so on your work order with the amount of insurance requested. We recommend you to purchase additional insurance over the base $100.00 on all packages shipping via carrier. Additional insurance is $1.00 per $1000.00 value. (Ex. $4.00 for $4000.00 value) Customer is to incur cost over regular shipping if expediting is needed. There is a return label included in every box shipped via carrier should you need to use it for a remake. Place the item back in the box, put the label on and call Fed-Ex for a pick up or to get a drop off location 1-800-463-3339. Yardage Requirements We have given the minimum yardage requirements for custom items, however this is used as a guide only. Our guide is based on using fabrics with repeats of 27” unless otherwise specified. Due to variance in fabrics we will not assume responsibility for yardage. Fabrics Fabrics should be shipped to Virginia Quilting, Inc. 100 South Main Street, LaCrosse, VA 23950. Your order must be labeled with the following information: your company name, address and phone number, client’s name, purchase order number; fabric pattern name, color, repeat, and amount of yardage sent regardless of origin at your location or supplier location. Fabric received without proper identification will result in order delays. VQI will hold fabrics received without work order for a period of 90 days. After 90 days, The fabric will be returned to your company with a $18.00 handling fee plus shipping charge.

VQI will not assume responsibility for undetected flaws or unstable fabrics. Flawed fabric will generally cause order delays, since special care is required to produce high quality products. We suggest that your fabric be rolled on tubes to reduce wrinkling and creases. Please help us serve you better by marking the face of fabric and marking which way is up on patterns when it is not easily detected. Please notify us if using seconds fabrics. Certain fabrics may be subject to extra charge. These fabrics will include laminated, vinyl, velvet, silk, lace, embroidered, crushed or pleated voile. Up to a 50% upcharge may be required to match plaid and stripe fabrics. (Due to the alignment of stripes when stripe does not match) Customer will be notified of additional charge before processing. Customer will be charged to press creases out of fabrics. Customer will be notified if pressing is necessary. If you desire the return of excess fabric from your order please indicate as such on your order form. Remakes We will repair or replace at our cost, any item not made to your specifications within an acceptable range of tolerance. We cannot be responsible for fabric in excess of $25.00 per yard wholesale All remakes must be returned to VQI for evaluation. Qualified returns must be made within 30 days of receipt of goods for us to accept responsibility of remediation or replacement. For items that are not our responsibility, you will be charged a handling fee of $18.00 per item, in addition to charges for time and material required. We require that remakes be clean, If we must clean an item, it will be charged to your account. Regular Hours of Operation Our customer service representatives are available to assist you from 7:30 a.m. to 5:00 p.m. Eastern Standard Time Monday through Thursday and 7:30 a.m. to 4:00 p.m. Eastern Standard Time on Friday. Regular Holidays We close the plant on the following holidays: New Year’s Day, Memorial Day, week of July 4th, Labor Day, Thanksgiving Day and Christmas Day Website Catalogs and order forms are available to download or print at http://virginiaquilting.com/; access forms from Customer Log In. Use email associated with your account as your log in and your account number as the password. Please notify Virginia Quilting if you need help with access on website.

TABLE OF CONTENTS

BEDDING BEDSPREADS and COVERLETS PAGE Bedspread Styles. . . . . . . . . 4 Coverlet Styles . . . . . . . . 4 Throw Bedspreads/Coverlets . . . . . . . 5 Waterfall Bedspreads/Coverlets . . . . . . 6 Fitted Bedspreads/Coverlets . . . . . . . 7 Quilted Top Gathered Skirt Bedspreads/Coverlets . . . . 8 Contour Bedspreads(Bed Hugger). . . . . . . 9 Unquilted Bedspreads . . . . . . . . 10 Foot Throw . . . . . . . . . . 10 Bedspread & Coverlet Options . . . . . . . 11 QUILTING BY THE YARD PAGE Quilting By the Yard . . . . . . . . 12 QUILT PATTERNS PAGE Outline Quilt Patterns . . . . . . . . 13 Multineedle Quilt Patterns . . . . . . . 15 Multineedle Quilt Patterns with Coordinating Thread . . . . 16 COMFORTERS PAGE Custom Comforter Styles . . . . . . . . 18 Custom Comforters . . . . . . . . 19 Comforter Quilt Patterns . . . . . . . 20 DUVETS PAGE Duvet Styles . . . . . . . . . 21 Duvet Covers . . . . . . . . . 22 DUSTERS PAGE Custom Duster Styles . . . . . . . . 23 Dusters . . . . . . . . . 24 HEADBOARDS PAGE Headboard Styles and Shapes. . . . . . . . 26 Headboards . . . . . . . . . 27 DAYBED COVERINGS PAGE Daybed Coverings . . . . . . . . 28 CANOPIES PAGE Canopies . . . . . . . . . 29

TABLE OF CONTENTS CONTINUED ACCESSORIES BENCHES PAGE Upholstered Benches . . . . . . . 31 CUSHIONS PAGE Foam Cushions . . . . . . . . 32 Blow-Filled Chair Cushions . . . . . . . 33 Barstool Cushion Covers . . . . . . . 33 Bolsters and Neckrolls . . . . . . . 34 SHAMS PAGE Pillow Shams . . . . . . . . . 35 Pillow Sham Inserts . . . . . . . . . 36 TOSS PILLOWS PAGE Toss Pillow Styles . . . . . . . . 37 Blow-Filled Toss Pillows - COM Remnants . . . . . 37 Toss Pillow Covers . . . . . . . . 37 Down Like Inserts . . . . . . . . 38 Feather and Down Inserts . . . . . . . 38 Outdoor Down Like Inserts . . . . . . . . 38 TABLECOVERS PAGE Tablecover Styles . . . . . . . . 39 Tablecovers . . . . . . . . 39 Table Placemats and Napkins . . . . . . . 40

TABLE OF CONTENTS CONTINUED DRAPERIES - TOP TREATMENTS DRAPES PAGE Window Treatment Decorating Worksheet and Quality Notes . . . 42 Drapery Stackback chart . . . . . . . . 43 Pinch Pleated Drapes . . . . . . . . 45 Back Tab Rodpocket . . . . . . . . . 45 Rod pocket Drapes . . . . . . . . 46 Hourglass . . . . . . . . . . 46 Ripplefold . . . . . . . . . . 46 Flat Panels . . . . . . . . 47 Grommet Top Panels . . . . . . . . 47 Shower Curtain . . . . . . . . 47 Smocked Top . . . . . . . . 48 Tab Drapes . . . . . . . . 48 Wave Drapes . . . . . . . . . 48 Cuffed Drapes . . . . . . . . . 49 Drapery options . . . . . . . . 50 Tie Backs . . . . . . . . 52 SWAGS PAGE Quality Notes . . . . . . . . . 53 Bell Swag . . . . . . . . . 55 Boxed Swag . . . . . . . . . 55 Bustle Swag . . . . . . . . . 55 Gathered Swag . . . . . . . . . 56 Pinched Swag . . . . . . . . . 56 Pole Swag . . . . . . . . . 56 Scarf Swag . . . . . . . . . 57 Turban Swag . . . . . . . . . 57 Queen Anne Swag . . . . . . . . 58 Swag Options . . . . . . . . . 58 CASCADES PAGE Cascades, Jabots/Pelmets . . . . . . . 59 Cascade options . . . . . . . . 60 SHADE OR VALANCE PAGE Austrian Shade or Valance . . . . . . . 61 Balloon Shade or Valance . . . . . . . 61 Flat Roman Shade or Valance . . . . . . . 61 London Shade or Valance . . . . . . . 62 Relaxed Roman Shade or Valance . . . . . . 62 Soft-Fold Roman Shade or Valance . . . . . . 62 Smocked Cloud Shade or Valance . . . . . . 63 Tapered Balloon Shade or Valance . . . . . . 63 Tucked Roman Shade . . . . . . . . 63 Shade options . . . . . . . . 64 SHADE SYSTEMS PAGE Rollease System . . . . . . . . 65 Roman Blind System . . . . . . . . 65

TABLE OF CONTENTS CONTINUED VALANCES PAGE Awning Valance . . . . . . . . . 66 Banner Valance . . . . . . . . 66 Bordeaux Valance . . . . . . . . 66 Box-Pleated Valance . . . . . . . . 67 Brandywine Valance . . . . . . . . 67 Carlyle Valance . . . . . . . . 67 Catherine Valance . . . . . . . . 68 Claudine Valance . . . . . . . . 68 Concord Valance . . . . . . . . 68 Dana Valnce . . . . . . . . . 69 Harmony Valance . . . . . . . . 69 Harrisburg Valance . . . . . . . . 69 Julia Valance . . . . . . . . . 70 Kingston Valance. . . . . . . . . 70 Labella Valance . . . . . . . . 70 Moreland Valance . . . . . . . . 71 Nightengale Valance . . . . . . . . 71 Rod Pocket Cloud Valance . . . . . . . 71 Rod pocket Sleeve . . . . . . . . 72 Rod pocket Windsor . . . . . . . . 72 Rolled Stage Coach Valance . . . . . . . 72 Shawl Valance . . . . . . . . . 73 Skip Pleated Valance . . . . . . . . 73 Soft Valance . . . . . . . . . 73 Stage Coach Valance . . . . . . . . 74 Tapered Valance . . . . . . . . 74 Victory Valance . . . . . . . . 74 Windsor Valance . . . . . . . . 75 Valance options . . . . . . . . 76 CORNICES AND LAMBREQUINS PAGE Cornices/Lambrequins . . . . . . . 77 LINING PAGE Drapery Linings . . . . . . . . 79 SHEERS PAGE Drapery Sheer . . . . . . . . . 80

Dear Client, Virginia Quilting, Inc. welcomes the opportunity to serve you with custom bedding, window coverings and accessories. We appreciate your support, suggestions and ideas as we at Virginia Quilting support you by producing quality products at true value pricing. If you do not find the exact product you need in our catalog, please call one of our customer service representatives or you may fax or email a drawing, sketch or picture to us for review. We are a custom workroom and will make every effort to produce your custom product. We encourage you to visit and tour our facilities. Virginia Quilting, Inc. was founded in 1968 as Northern Virginia Quilting and changed to Virginia Quilting, Inc. in 1975. Thank you for the confidence and loyalty you have shown for 50 years by using our services. The growth of Virginia Quilting has allowed us to acquire state-of-the-art equipment to produce premium products at reasonable prices. Our computer quilting and comforter machines enable us to offer a broad range of patterns. The width of our quilting machines allows us to match fabric and quilt patterns and to utilize a premium seamless lining. These and other innovative products are explained in greater detail in our catalog. Virginia Quilting, Inc. offers to pick-up and delivery service in areas expanding from Maryland to South Carolina. Please call customer service at 434-757-1809 for more information on these routes and to make sure our trucks are servicing your area. For other areas we offer the convenience of Fed-Ex shipping. Our commercial division operates as VQC, Inc. and offers competitive pricing for commercial projects. Please contact VQC at 434-447-5091 or by faxing details to 434-447-5095 when your quantities require commercial pricing. We genuinely appreciate the opportunity to serve you and help you reach your goals. You are the most vital part of our company and we look forward to working with you. Sincerely, John Wesley McAden Jr. President

BEDSPREADS, COVERLETS

& QUILT ONLY

BEDSPREAD AND COVERLET NOTES

Bedspreads/Coverlets- Bedspreads/coverlets and may be quilted or unquilted. Customer may choose from outline/pantograph or multineedle quilt patterns. Unquilted bedspreads should be made from heavy weight fabric such as upholstery. All bedspreads will have a minimum pillow tuck of 20” unless otherwise specified to stop at headboard. Throw, Fitted, Waterfall or Quilted Top Gathered/Tailored Skirt styles are available. Drop length must be provided by customer.

2

Throw Style- Bedspread has straight drop to floor and features bell corners.

Fitted Style- Bedspread has straight drop to floor and features gusset at corners and ¼” welt around mattress edge.

Waterfall Style – Bedspread has straight drop to floor with no welt at mattress edge. This style has a tailored look. Corners are cut at foot of spread and may be finished with either boxed corners, wrapped corners or inverted pleats. Gussets may be quilted or unquilted.

Wrapped – Side drops wrap 12 inches under at foot of spread. This creates a tailored look.

Inverted - This style has the appearance of a throw with a tailored fit. Corners may have inverted pleats, unquilted or quilted gussets. Inverted pleats are attached to underside and can be shorter than desired drop of spread.

Boxed – Corners are square cut and sewn down at foot of bed. This gives the appearance of a tailored throw style bedspread. Corners can be sewn down to a specified length with balance open. This allows corners to straddle rail on poster beds. Sketch shows partially opened boxed corner.

Gathered Skirt- Bedspread has straight unquilted drop gathered at 2 ½ times fullness with spilt corners and ¼” welt around mattress edge.

BEDDING QUALITY NOTES

BEDDING WORK SHEET The following must be on each order. All orders must be in writing. To custom fit a bedspread/coverlet, you must measure the mattress. To custom fit a dust ruffle, you must measure the box spring.

1. WIDTH ______

2. LENGTH ______

3. DROP ____

We will not process your order without these measurements Be sure to add the following information when you order.

1. Quilting Design 2. Style of item 3. Quantity of item desired 4. Identify fabric and yardage 5. Identify fabric vendor 6. Attach swatch with correct side of fabric and top of pattern marked to order if possible

3

BEDSPREAD/COVERLET STYLES Throw Fitted Waterfall

Gathered Skirt Contour

BEDSPREADS/COVERLETS – Bedspreads/coverlets may be quilted or unquilted. Customer may choose from outline/pantograph or multineedle quilt patterns. Unquilted bedspreads should be made from heavy weight fabric such as upholstery. All bedspreads will have a minimum pillow tuck of 20” unless otherwise specified to stop at headboard. Throw, fitted or waterfall, or Quilted Top Gathered Skirt styles are available. Drop must be specified by customer.

STANDARD MEASUREMENTS BEDSPREADS/COVERLETS Twin 39Wx 75L Full 54W x 75L Queen 60W x 80L King 78W x 80L California King 72W x 84L

4

THROW BEDSPREADS AND COVERLETS Throw style has straight drop and features bell corners.

Fabrics are pattern matched, then joined. Quilted in one piece so fabric pattern and quilting design match. Lined with a high quality white or ivory poly-cotton lining. Selvedge edges covered with bias binding. Hem is turned under 1 ½” and sewn with blind-stitch. 6 oz. fiberfill per sq. yd. is standard. SIZE SPREAD YARDAGE COVERLET YARDAGE(drop under 14”) Twin 8 8 Full 8 8 Queen 12 8 King 12 12 Outline spread and coverlet use coordinating thread on face fabric, thread color will show on back as quilting is sewn thru. Outline/Pantograph Throw Spread– Style# OTD SIZE CODE CLASS 1 CODE CLASS 2 (Outline, Vermecelli, Tacks) Twin OTDT OTDT2 Full OTDF OTDF2 Queen OTDQ OTDQ2 King OTDK OTDK2 Multineedle spreads and coverlets are quilted on a twin-line multineedle machine. Off-white nylon thread only; will appear white on dark solids. Lined with white high quality poly-cotton lining. Cannot quilt use COM lining. Note width limitations on pattern pages 17 and 18. Preseam Multineedle Throw Spread – Style# PTD SIZE CODE Twin PTDT Full PTDF Queen PTDQ King PTDK Preseam L6 Multineedle Throw Coverlet– Style# PTD SIZE CODE Twin PTCDT Full PTCDF Queen PTCDQ King PTCDK 5

WATERFALL BEDSPREAD AND COVERLETS Waterfall style has straight drop with no welt at mattress edge. Corners are cut at foot of spread and may be finished in one of three styles. Refer to corner styles under options. Waterfall style bedspread is a basic throw style with altered corners at foot.

Fabrics are pattern matched, then joined. Quilted in one piece so fabric pattern and quilting design match. Lined with a high quality white or ivory poly-cotton lining. Selvedge edges covered with bias binding. Hem is turned under 3” and sewn with blind-stitch.6 oz. fiberfill per sq. yd. is standard. SIZE SPREAD YARDAGE COVERLET YARDAGE(drop under 14”) Twin 8 8 Full 8 8 Queen 12 8 King 12 12 Outline spread and coverlet use coordinating thread on face fabric, thread color will show on back as quilting is sewn thru. Outline/Pantograph Waterfall Spread – Style# OWD SIZE CODE CLASS 1 CODE CLASS 2 (Outline, Vermicelli, Tacks) Twin OWDT OWDT2 Full OWDF OWDF2 Queen OWDQ OWDQ2 King OWDK OWDK2 Multineedle spreads and coverlets are quilted on a twin-line multineedle machine. Off-white nylon thread only; will appear white on dark solids. Lined with white high quality poly-cotton lining. Cannot quilt use COM lining. Note width limitations on pattern pages 17 and 18. Preseam Multineedle Waterfall Spread – Style# PWD SIZE CODE Twin PWDT Full PWDF Queen PWDQ King PWDK L6 – Multineedle spreads and coverlets are quilted on a single-line multineedle machine. Color – coordinating thread (color choice from thread card) nylon thread only; will appear white on dark solids. Lined with white high quality poly-cotton lining. Cannot quilt COM lining. Note width limitations on pattern pages 17 and 18. Pre-seam L6 Multineedle Throw Spread – Style# PTD SIZE CODE Twin PWCDT Full PWCDF Queen PWCDQ King PWCDK

6

FITTED BEDSPREAD AND COVERLETS Fitted style has straight drop and features gusset and ¼” welt around mattress edge.

Fabrics are pattern matched, then joined. Quilted in one piece so fabric pattern and quilting design match. Lined with a high quality white or ivory poly-cotton lining. Selvedge edges covered with bias binding on hems. Hem is turned under 3” and sewn with blind-stitch. ¼” pencil welt at mattress edge is standard. 6 oz. fiberfill per sq. yd. is standard. SIZE SPREAD YARDAGE COVERLET YARDAGE(drop under 14”) Twin 9 9 Full 12 9 Queen 12 9 King 12 12 Outline spread and coverlet use coordinating thread on face fabric, thread color will show on back as quilting is sewn thru. Outline/Pantograph Fitted Spread – Style# OFD SIZE CODE CLASS 1 CODE CLASS 2 (Outline, Vermicelli, Tacks) Twin OFDT OFDT2 Full OFDF OFDF2 Queen OFDQ OFDQ2 King OFDK OFDK2 Multineedle spreads and coverlets are quilted on a twin-line multineedle machine. Off-white nylon thread only; will appear white on dark solids. Lined with white high quality poly-cotton lining. Cannot quilt use COM lining. Note width limitations on pattern pages 17 and 18. Preseam Multineedle Fitted spread – Style# PFD SIZE CODE Twin PFDT Full PFDF Queen PFDQ King PFDK L6 – Multineedle spreads and coverlets are quilted on a single-line multineedle machine. Color – coordinating thread (color choice from thread card) nylor thread only; will appear white on dark solids. Lined with white high quality poly-cotton lining. Cannot quilt using COM lining. Maximum finished width is 113”. Preseam L6 Multineedle Throw Spread – Style# PTD SIZE CODE Twin PFCDT Full PFCDF Queen PFCDQ King PFCDK

7

QUILTED TOP GATHERED SKIRT BEDSPREAD AND COVERLETS Quilted top gathered skirt has quilted top with unquilted gathered skirt drop and ¼” welt at mattress edge.

Fabrics are pattern matched, then joined. Top quilted only with gathered skirt. Gathered skirt is 2 ½ times fullness with split corners. Top quilted in one piece so fabric pattern and quilting design match. Lined with a high quality white or ivory poly-cotton lining. Hem is turned under 1 ½” and sewn with blind-stitch.1/4” pencil welt at mattress edge. 6 oz. fiberfill per sq. yd. is standard. SIZE YARDAGE Coverlet Yardage (drop under14”) Twin 12 9 Full 18 12. ½ Queen 18 12 ½ King 19 ½ 14 FOR CONTRASTING SKIRT ON BEDSPREAD FOR CONTRASTING SKIRT ON COVERLET SIZE TOP YARDAGE SKIRT YARDAGE TOP YARDAGE SKIRT YARDAGE Twin 3 ½ yds. 8 ½ yds. 3 ½ yds. 6 yds. Full 6 ½ yds. 9 yds. 6 ½ yds. 7 yds. Queen 6 ½ yds. 9 yds. 6 ½ yds. 7 yds. King 6 ½ yds. 10 yds. 6 ½ yds. 7 yds. Outline spread and coverlet use coordinating thread on face fabric, thread color will show on back as quilting is sewn thru. Outline/Pantograph Gathered Skirt Spread – Style# OTGSD SIZE CODE CLASS 1 CODE CLASS 2 (Outline, Vermicelli, Tacks) Twin OTGSDT OTGSDT2 Full OTGSDF OTGSDF2 Queen OTGSDQ OTGSDQ2 King OTGSDK OTGSDK2 Multineedle spreads and coverlets are quilted on a twin-line multineedle machine. Off-white nylon thread only; will appear white on dark solids. Lined with white high quality poly-cotton lining. Cannot quilt use COM lining. Note width limitations on pattern pages 17 and 18. Preseam Multineedle Gathered Skirt Spread– Style# PTGSD SIZE CODE Twin PTGSDT Full PTGSDF Queen PTGSDQ King PTGSDK Preseam L6 Multineedle Throw Spread – Style# PTD SIZE CODE Twin PTGSCDT Full PTGSCDF Queen PTGSCDQ King PTGSCDK

8

CONTOUR BEDSPREAD (BED HUGGER)

A contour spread features sewn down foot corners with elastic. Pillow tuck is standard unless otherwise specified. This style is ideal for platform and waterbeds. Quilted in one piece. Lined with high quality polyester-cotton lining. Selvedge edges are serged only. ¾” single needle hem. 6 ounce fiberfill per square yard is standard.

SIZE YARDAGE Twin 8 Full 8 Queen 12 King 12 Outline spread uses coordinating thread on face fabric, thread color will show on back as quilting is sewn thru. OUTLINE/PANTOGRAPH CONTOUR SPREAD – STYLE # OCD SIZE CODE CLASS1 CODE CLASS 2 (Outline, Vermicelli, Tacks) Twin OCDT OCDT2 Full OCDF OCDF2 Queen OCDQ OCDQ2 King OCDK OCDK2 Multineedle spreads and coverlets are quilted on twin-line multineedle machine. Off- white thread only, will appear white on dark solids. Lined with white polyester-cotton lining. Cannot quilt through COM lining. Please note width limitations listed on pattern pages 17 and 18.

PRESEAM MULTINEEDLE CONTOUR SPREAD – STYLE # PCD SIZE CODE Twin PCDT Full PCDF Queen PCDQ King PCDK L6 – Multineedle spreads and coverlets are quilted on a single-line multineedle machine. Color – coordinating thread (color choice from thread card) nylon thread only; will appear white on darm solids. Lined with white high quality poly-cotton lining. Cannot quilt using COM lining. Maximum finished width is 113”. Pre-seam L6 Multineedle Throw Spread – Style# PTD SIZE CODE Twin PTGSCDT Full PTGSCDF Queen PTGSCDQ King PTGSCDK 9

UNQUILTED BEDSPREADS

Throw Fitted Waterfall Note: In order for Virginia Quilting to guarantee any unquilted bedspread, the face fabric should be a heavy weight fabric. UNQUILTED THROW SPREAD OR COVERLET – STYLE # UT UNLINED LINED SIZE YARDAGE CODE SIZE YARDAGE CODE Twin 8 UTUT Twin 8 UTLT Full 8 UTUF Full 8 UTLF Queen 12 UTUQ Queen 12 UTLQ King 12 UTUK King 12 UTLK

UNQUILTED FITTED SPREAD OR COVERLET – STYLE # UF UNLINED LINED SIZE YARDAGE CODE SIZE YARDAGE CODE Twin 8 UFUT Twin 8 UFLT Full 8 UFUF Full 8 UFLF Queen 12 UFUQ Queen 12 UFLQ King 12 UFUK King 12 UFLK

UNQUILTED WATERFALL SPREAD OR COVERLET – STYLE # UW UNLINED LINED SIZE YARDAGE CODE SIZE YARDAGE CODE Twin 8 UWUT Twin 8 UWLT Full 8 UWUF Full 8 UWLF Queen 12 UWUQ Queen 12 UWLQ King 12 UWUK King 12 UWLK FOOT THROW – Standard size 27” x 89” A non-functional, decorative throw for the foot of the bed. Standard is unquilted. Light weight 4 oz. or 6 oz. poly fiber per square yard. is standard. Custom sizes available, please contact for quote. FOOT THROW - STYLE # FOOT FOOT OPTIONS AVAILABLE Quilted (one side) 3 yards per side FOOTQ Welt 1.5 yards FOOTW Trim 7 yards FOOTT Banding (one side) 2.75 yards FOOTB

10

NOTE – Please add to basic yardage- example; reverse sham (p[lain) requires 2 yards of fabric; a twin bedspread requires 9 yards plus2 yards equals 11 linear yards. The 11 yards needs to be in one continuous piece. OPTIONS AVAILABLE YARDAGE CODE Banding, single seamless row 3 ½ yds. 1001SRB Banding, inset and/or mitered band 3 ½ yds 1001MITB Cut out at foot for poster bed 1015CUT Drop over 25” 1013D25 Fiber, reduce fiberfill to 4 oz. per square yd. 101RF5 Fiber, increase fiberfill to 8 oz. per square yd. 1010IF75 Fiber, increase fiberfill to 10 oz. per square yd.(outline only) 1010IF10 Pillow tuck over 30” call for yd. 1012PT30 Reverse sham, plain hem 2 yds. 1008RS Reverse sham, shirred welt cord hem (3/8”, ½”, ¾”,1”) 3 yds. 1064RSSC Reverse sham, scallop hem 3 yds. 1064RSS Reverse sham, welt cord hem (3/8”, ½”, ¾”,1”) 3 yds. 1064RSC Reverse sham- plain Reverse sham- scalloped Reversible throw 100REV 50% Ruffle, gathered single row at hem 4 ½ yds. 1002SRR Ruffle, pleated single row at hem 4 ½ yds. 1003PRHEM Scallop at hem (Twin and Full) 1 ½ yds. 1004SH (Queen and King do not require extra yardage) NOTE: Channel quilt patterns cannot have scallop hem Separate lined with COM lining 1069SL Separate lined with white or ivory 50/50 poly-cotton lining 1068SLL Split corners (from mattress edge or center of bell) 1014SPC Trim, prefab on hem (must have lip) 12 yds. 1003PTH Trim, self or contrast welt (3/8” or ½”) 1 ½ yds. 1005WH Trim, self or contrast welt (3/4” or 1”) 1 ½ yds. 1006WH1 Trim, shirred self or contrast welt (1/2”,3/4” or 1”) 3 yds. 1007SWH ADDITIONAL WATERFALL OPTIONS Boxed corners 1013BC Boxed corner, boxed from top with opening at bottom 1017BOC ADDITIONAL WATERFALL & FITTED OPTIONS Gussets call for yd. 1009GUS Gusset, double inverted pleat (unquitled) 1 yd. 1014DIP Gusset, inverted pleat for scallop hem 1 ½ yds. 1014IPS Gusset, quilted 1016QG Wrapped corner 1015WC CONTOUR OPTIONS AVAILABLE Four sided drop, with elastic in corners 1018EC Four sided drop, without elastic 1022FS OPTIONS UNQUILTED BEDSPREADS AVAILABLE YARDAGE CODE Interlined (VQ supplies interlining) 1019UI Items subject to extra charge (Virginia Quilting will confirm any additional charges before processing order)

(a) Matching plaids (b) Special cutting, using templates (c) Some beaded trims and beaded fabrics (d) Fabrics that are difficult to sew or require interfacing or lining to stabilize

11

QUILTING BY THE YARD

Outline Quilt By The Yard Quilt patterns on page 16. Outline quilted with 4-oz., 6-oz. or 8-oz. polyester fiberfill per square yard. Lined with high quality poly-cotton lining. CODE 4/6 oz. 8oz 54” – 50/50 poly-cotton lining CLASS 1 OQYP54 54” – Non-woven backing OQYNWP54 54” – Vermicelli CLASS 2 OQYVP54 Note: Any “quilt only” required in lengths longer than 15 yards must be quilted while sitting down and requires an upcharge. Note: Call for maximum yardage on diamond, channel and squares. Color-Coordinating Multineedle Quilt By The Yard L6 – Quilt Only Customer must choose thread color from thread card and select quilt pattern from page 18. Quilted with 4-oz., 6-oz. or 8-oz. polyester fiberfill per square yard. Lined with high quality poly-cotton lining. 4/6 oz. 8oz 54” Fabric MQYL654 120” Fabric MQYL6120 OPTIONS AVAIABLE Preseam fabric before quilting PRESM Multineedle Quilt By The Yard – Twin – Line Quilt patterns on page17. Quilted with 4-oz., 6-oz. or 8-oz. polyester fiberfill per square yard. Lined with high quality poly-cotton lining. Quilted on Twin-line multineedle-machine. 54” Fabric MQYP54 122” Fabric MQYP130 OPTIONS AVAIABLE Preseam fabric before quilting PRESM

Note: We suggest non-woven backing for upholstery fabrics. For commercial yardage please contact for price quote.

12

OUTLINE HAND GUIDED PATTERNS Outline Hand Guided Quilt Patterns Color coordinating thread. Thread and quilting will show through on backside of spread Detailed outline quilting available (follows pattern on fabric).  

OQ-1 OQ-2 OQ-3 all over 6" Channel 5 1/2" h x 4 1/2" w

       OQ-4 OQ-5 OQ-6 4 3/8” h x 4 ½” w 5 ½” h x 5 ½” w 4 ½” h x 6 ½”w

 

  OQ-7 OQ-8 OQ-9 11 ¼” h x 5 3/8” w all over 16 ½” x 10”w

OQ-10 OQ-11 OQ-12 7” h x 3 ¾”w 6”h x 6”w 6”h x 5 ¾”w

13

14

MULTINEEDLE QUILT PATTERNS

Multineedle Quilt Patterns Off-White thread only (will appear white on dark fabrics) Maximum finished width 113” Single Line stitching – needle spacing 6”x 6” patterns  

  

 

 

 

MN - 206-2 MN - 213-2 MN - 340-2

 

  

MN - 514-2

MN - 749-2 MN - 800-

2 Twin Line stitching – 1” needle spacing 6”x 6” patterns  

  

   

Double 213 Double 514 Arabesque

 

  

 

Bells 1" Channel Wavy Channel

15

L6 - Multineedle Quilt Patterns Color Coordinating Thread

Pattern shown can be quilted with 4-oz., 6-oz., or 8 oz. fiberfill per square yard. Patterns are approximately 12” x 12”. Customer must choose thread color from color card. Preseam spreads cannot exceeed 113” in width.

16

COMFORTERS, DUVETS, DUSTERS, SHAMS,

HEADBOARDS, CANOPIES &

DAYBED COVERINGS

18

COMFORTER

Fabrics are pattern matched, then joined. Front and back are joined to form sack, which is then filled and quilted with coordinating thread. Suggest comforter be made reversible. Square corners are standard. Standard drop is 14”. No pillow tuck, requires separate pillow shams. Standard fiberfill is 10 ounces per square yard. COMFORTER – STYLE# COMF COM LINING VQ LINING SIZE YARDAGE CODE SIZE YARDAGE CODE Twin 7 yds .per side COMF10T Twin 7 COMF10VQT Full 7 yds. per side COMF10F Full 7 COMF10VQF Queen 7 yds. per side COMF10Q Queen 7 COMF10VQQ King 11 yds. per side COMF10K King 11 COMF10VQK OPTIONS AVAILABLE YARDAGE CODE Banding, up to 15” wide on three sides 3 yds. 8006B Buttons call for yds. 800BUT Reduce fiberfill to 8 ounces per square yard 8008OZ Round corners 8005SHW Ruffle, gathered (4” self-lined) 4 yds. 800SRH Ruffle, pleated (4” self-lined) 5 yds. 800PRH Special sizes (largest possible size 118” x 118”) 800CSPS Trim, prefab trim or decorative cord on hem (on 3 sides) 10 yds. 8001PT Trim, self or contrast welt (3/8”to 1”) (on 3 sides) 1 ½ yds. 8003WH1 Trim, shirred self or contrast welt (3/8”to 1”) (on 3 sides) 3 yds. 8004WH Trim on fourth side call for yds. 8004WH4 NOTE:

OUTLINE QUILTED COMFORTERS REFER TO REVERSIBLE THROW SPREAD. TACK QUILTING PATTERNS HAVE 15 OUNCE FIBERFILL AND REQUIRE A 50% UPCHARGE. FINISHED SIZES MAY VARY UP TO 4” FROM APPROXIAMTE FINISHED MEASUREMENT. WE DO NOT RECOMMEND CHANNEL QUILT PATTERN ON PLAIN FABRICS. WE DO NOT RECOMMEND CHANNEL OR SQUARE PATTERNS ON PLAIDS OR STRIPES. WE DO NOT RECOMMEND THE SHIELD PATTERN ON KING COMFORTERS; THE PATTERN HAS

TO BE TURNED WHEN QUILTING KING COMFORTERS. WHEN GOING OVER 14” DROP ON SIZE THE QUILT PATTERN MAY BECOME DISTORTED DUE

TO STRETCHING THE PATTERN TO FIT COMFORTER.

19

Comforter Patterns

 

  

   

Comf- 109 Comf- 111 Comf-138  

  

Channel Cloud Diamond King  

  

 

Diamond Queen Scallop CloudScallop Button Tack

 

  

 

Scroll Shield We can custom design your pattern or logos; please contact us for further information. 20

DUVET COVERS

FINISHED MESUREMENTS FOR DUVET INSERTS Twin 67” x 89” Full 82” x 89” Queen 88” x 94” King 106” x 94”

21

DUVET COVERS All duvet covers, quilted or unquilted, are made reversible. Zipper closure and square corners are standard unless otherwise specified. May request 4 oz. (light weight) or 6 oz. (medium weight) fiberfill when quilted. Quilting available but only recommended for lightweight fabric. Quilted on one side only. Must specify finished width and finished length of duvet cover and placement of closure (head or foot). SIZE YARDAGE CODE UNQUILTED Twin 12 yds. DCUT Full 12 yds. DCUF Queen 12 yds. DCUQ King 18 yds. DCUK MULTINEEDLE QUILTED Twin 14 yds. DCMT Full 14 yds. DCMF Queen 14 yds. DCMQ King 21 yds. DCMK OUTLINE QUILTED Twin 14 yds. DCOT Full 14 yds. DCOF Queen 14 yds. DCOQ King 21 yds. DCOK OPTIONS AVAILABLE YARDAGE CODE Banding call for yds. 1037DBA Closure, button (add per button) 1027DBD

(Twin -7, Full -8, Queen -9, King-9) Closure, snap 1033DS Closure, zipper 1031DZ Closure, Velcro 1032DV N/C Flap (standard 4”) 1 yd. 1034DFP Flange 4 yds. 1036DFL Ruffle on three sides (standard 4”) 4 yds. 1028DR Ties (per pair) ½ yd. 1035DT Trim, prefab or decorative cord on hem (on 3 sides) 9 yds. 1026PFT Trim, self or contrast welt (1/2”, ¾”, 1”) (on 3 sides) 1 ½ yds. 1029DW Trim, shirred self or contrast welt (1/2”, ¾”, 1”) (on 3 sides) 3 ½ yds. 1030DSW Trim on fourth side call for yds. 1029WH4

DUVET INSERT

DUVET COVER INSERT – STYLE #DCINS Ivory color 50/50 poly-cotton lining. Polyester fiberfill, 10 oz. per square yard. Channel or Diamond quilt pattern. SIZE POLY-FILL DOWN LIKE EXTRA LOFT DOWN LIKE Twin DCINST DCINSDLT DCINSDLXT Full DCINSF DCINSDLF DCINSDLXF Queen DCINSQ DCINSDLQ DCINSDLXQ King DCINSK DCINSDLK DCINSDLXK OPTIONS AVAILABLE Increase fiberfill to 15 oz. per square yard on poly-fill 1033DI20 Special Sizes 800CSPS

22

CUSTOM DUSTER STYLES STYLES AVAILABLE

Shirred Tailored Open Box Pleat Closed Box Pleat

Cluster Shirred Cluster Pleated

STANDARD MEASUREMENTS Twin 39W x 75L x 14D Full 54Wx 75L x 14D Queen 60W x 80L x 14D King 78W x 80L x 14D

23

DUSTERS

Dust skirts are attached to a platform made of high-count woven polyester-cotton lining. All dust skirts have split corners. All dust skirts are blind hemmed. VQ will supply lining for dusters (lining included in prices of lined dust skirts) Setback (4” to 6” band at top of box spring) is standard on dusters. SHIRRED DUSTER- STYLE # DRS Shirred with 2 ½ times fullness. Fabric pattern is not matched. Yardage based on fabric with no repeat and 14” drop. UNLINED LINED Size Yardage Code Size Yardage Code Twin 7 DRSUT Twin 7 DRSLT Full 8 DRSUF Full 8 DRSLF Queen 8 DRSUQ Queen 8 DRSLQ King 8 DRSUK King 8 DRSLK TAILORED DUSTER- STYLE # DRT Straight drop with kick pleat in center of side panels and corners. Full, Queen and King dusters also have kick pleat in center of foot drop. Fabric is pattern matched. Yardage based on fabric with no repeat and 14” drop. UNLINED LINED Size Yardage Code Size Yardage Code Twin 5 DRTUT Twin 5 DRTLT Full 5 ½ DRTUF Full 5 ½ DRTLF Queen 5 ½ DRTUQ Queen 5 ½ DRTLQ King 6 DRTUK King 6 DRTLK CLUSTER SHIRRED DUSTER- STYLE # DRCS Duster has gathers at bottom corners and in middle of drops. Space between gathers will be flat. Fabric pattern is matched. Yardage based on fabric with 27” repeat and 14” drop. UNLINED LINED Size Yardage Code Size Yardage Code Twin 7 DRCSUT Twin 7 DRCSLT Full 8 DRCSUF Full 8 DRCSLF Queen 8 ½ DRCSUQ Queen 8 ½ DRCSLQ King 8 ½ DRCSUK King 8 ½ DRCSLK CLUSTER PLEATES DUSTER- STYLE # DRCP Cluster has pleats at bottom corners and in middle of side drops. Pleats are flat and approximately 3” wide. Fabric is pattern matched. Yardage based on fabric with 27” repeat and 14” drop. UNLINED LINED Size Yardage Code Size Yardage Code Twin 7 DRCPUT Twin 7 DRCPLT Full 8 DRCPUF Full 8 DRCPLF Queen 8 ½ DRCPUQ Queen 8 ½ DRCPLQ King 8 ½ DRCPUK King 8 ½ DRCPLK

24

DUSTERS CONTINUED

OPEN BOX PLEATED DUSTER- STYLE # DROP Pleats are 6” to 8” depending on size of duster. 4”spacing between pleats. Fabric is pattern matched. Yardage based on fabric with no repeat and 14” drop. UNLINED LINED Size Yardage Code Size Yardage Code Twin 7 DROPUT Twin 7 DROPLT Full 8 DROPUF Full 8 DROPLF Queen 8 ½ DROPUQ Queen 8 ½ DROPLQ King 8 ½ DROPUK King 8 ½ DROPLK CLOSED BOX PLEATED DUSTER- STYLE # DRCBP Pleats are 6” to 8” depending on size of duster. No spacing between pleats. Fabric is pattern matched. Yardage based on fabric with no repeat and 14” drop. UNLINED LINED Size Yardage Code Size Yardage Code Twin 7 DRCBPUT Twin 7 DRCBPLT Full 8 DRCBPUF Full 8 DRCBPLF Queen 8 ½ DRCBPUQ Queen 8 ½ DRCBPLQ King 8 ½ DRCBPUK King 8 ½ DRCBPLK OPTIONS AVAILABLE YARDAGE CODE Banding at hem 3 yds. 1016BND Contrast pleat (6” to 8”) Contrast pleat, tailored duster 1 ½ yds. 1022CPT Contrast pleat, pleated duster (specify # of pleats) 3 ½ yds. 1023CPB Extra split (side or foot) BDXSPLT Four sided drop 1 ½ yds. BDRFS Hidden seams on prints BDRHS Lined duster 17” to 23” drop 1024LO17 Special size pleats call for yds. BDRCRPS Velcro BDRVEL

25

HEADBOARD STYLES AND SHAPES

STANDARD MEASUREMENTS Measurements are 2” wider than bed frames Twin 41” Full 56” Queen 62” King 80” Premium legs are 16” Deluxe legs are 20” NOTE: Height varies from 42” minimum straight styles to 56” maximum on shaped headboards. NOTE: The style numbers shown above are to select shape of headboard only. All options must be requested separately. NOTE: We do not suggest a flat roll on HB-6; there may be tucks in styles HB-2 and HB-7. NOTE: Premium headboards are boxed and shipped complete by common carrier. Deluxe headboards the legs are detached to save shipping cost. Twin, full and queen can ship UPS. King Deluxe must ship by common carrier. *NOTE: Headboard shipping cost can be equivalent to labor or higher; cost can be higher depending on delivery area and size of headboard. Headboards that require freight shipping will have cost advised to customer before shipping. 26

HB – 1 HB – 2 (HB103) HB-3 (HB 101)

HB – 4

(Shown with flat roll) (Shown with flat roll option)

HB – 5 (HB100) HB – 6 (HB107)

HB – 7

(Shown with flat roll) (Shown with flat roll) (Shown with flat roll)

(Shown with flat roll)

HEADBOARDS

HEADBOARDS – PREMIUM Headboards feature three-piece construction with 1 ¼” frame and solid legs. Legs are covered. Single cord perimeter. Backs are covered with lining or COM fabric. Premium headboards are boxed and shipped complete by common carrier. PREMIMUM HEDBOARDS SLEIGHBED HEADBOARDS SIZE YARDAGE CODE SIZE YARDAGE CODE Twin 2 HBPT Twin 2 HBSLET Full 3 HBPF Full 3 HBSLEF Queen 3 ½ HBPQ Queen 3 ½ HBSLEQ King 4 HBPK King 4 HBSLEK HEADBOARDS – DELUXE Headboard designs are the same as premium. Body is a solid one-piece construction with two covered bolt-on legs. Single cord perimeter. Backs are covered with lining or COM lining. Legs are detachable to save shipping cost. Twin, Full and Queen can ship UPS. King headboards must ship common carrier,

DELUXE HEDBOARDS SUNBURST STYLE HEADBOARDS SIZE YARDAGE CODE SIZE YARDAGE CODE Twin 2 HBDT Twin 2 HBSUNT Full 3 HBDF Full 3 HBSUNF Queen 3 ½ HBDQ Queen 3 ½ HBSUNQ King 4 HBDK King 4 HBSUNK NOTE FOR YARDAGE:

Please allow double the yardage to use face fabric on back of headboard. Please add additional 1 yard for button tufted. NOTE: Fabrics not railroaded will have visible seams on all styles. OPTIONS AVAILABLE YARDAGE CODE Buttons call for yds. 5004HBB Cording, Contrast 1 ½ yds. 500CC Cording, Double cord 3 yds. 5006HBDC Decorative nail tack 5004DN Deep tufting call for yds. 5004HBT Extra padding 5005HBXP Flat roll (T- 1yd., F - 2yds., Q - 3yds., K – 3yds.) 5003HBFR Outline quilted ½ yd. 5001HBO Over size height (56” to 64”) or body over 40” Over size height (over 64”) or body 48” *Oversize width on premium– thicker than 1 ¼” (maximum width 3”) Shirred roll (T- 2 yds., F- 2yds., Q- 3yds., K -3 ½ yds.) 5002HBSR Slipcover (covers only headboard and requires a template) call for yds. HBSLP Special design (include template or scale drawing) Wall mount none 5000WALL Wall mount and legs *NOTE: Over 64” height cannot be delivered on delivery truck with legs attached will have to have separate leg on premium styles. *NOTE: Headboard shipping cost can be equivalent to labor or higher; cost can be higher depending on delivery area and size of headboard. Headboards that require freight shipping will have cost advised to customer before shipping.

27

DAYBED COVERINGS

Daybed coverings can be made with all the options of a coverlet, bedspread and dustruffle. The coverlet can be fabricated in fitted or throw style and any dust ruffle style can be used. Please indicate fabric placement on work order. Price daybed items as you would price a twin.

YARDAGE REQUIREMENTS

Yardage is figured depending on how you want fabric to run. Please call for assistance.

28

CANOPIES

STYLES AVAILABLE

Tailored #CPT Shirred #CPS

Fabric patterns are matched. Canopy has a 12” four sided drop. Customer must specify exact width and length. Customer must specify exact placement for dowel holes. Arched canopies and sunburst canopies are available. Please call for details NOTE: A photograph of bed would be helpful to determine how canopy should hang from frame.

Self lined yardage is for drop only. If you need top self lined please call for yardage required. Yardage provided is based on 27” repeat and 12” drop. TAILORED CANOPY –STYLE # CPT Unlined drop Self-lined drop SIZE YARDAGE CODE SIZE YARDAGE CODE Twin 8 ½ CTUT Twin 12 ½ CTSLT Full 12 CTUF Full 13 CTSLF Queen 12 CTUQ Queen 16 CTSLQ King 12 ¾ CTUK King 19 ½ CTSLK SHIRRED CANOPY –STYLE # CPS Unlined drop Self-lined drop SIZE YARDAGE CODE SIZE YARDAGE CODE Twin 9 ½ CSUT Twin 14 ½ CSSLT Full 13 CSUF Full 22 CSSLF Queen 13 CSUQ Queen 22 CSSLQ King 13 ½ CSUK King 23 ½ CSSLK OPTIONS AVAILABLE (add to base price) YARDAGE CODE Banding at hem 3 yds. 1059CPB Inverted pleat 1056CIP Scallop hem 1058CS Separate lined* (labor only) 1061CTSL1 Trim call for yds. 1060CT

29

ACCESSORIES

UPHOLSTERED BENCHES

PARSON BENCH – STYLE # PBEN Benches are constructed of ¾” solid plywood. Solid wooden legs are attached with “L” brackets. Benches have 3” thick foam cushion with ¼” cording around seat cushion. SIZE DIMENSIONS YARDAGE CODE 30 30” x 18” x 21” 3 PBEN30 42 42” x 18” x 21” 3 PBEN42 60 60” x 18” x 21” 4 PBEN60 PARSON BENCH WITH TAILORED SKIRT- STYLE# PBENT SIZE DIMENSIONS YARDAGE CODE 30 30” x 18” x 21” 4 ½ PBEN30T 42 42” x 18” x 21” 5 PBEN42T 60 60” x 18” x 21” 5 ½ PBEN60T PARSON BENCH WITH GATHERED SKIRT - STYLE # PBENG SIZE DIMENSIONS YARDAGE CODE 30 30” x 18” x 21” 4 PBEN30G 42 42” x 18” x 21” 5 PBEN42G 60 60” x 18” x 21” 6 PBEN60G PARSON BENCH WITH PLEATED SKIRT - STYLE # PBENP SIZE DIMENSIONS YARDAGE CODE 30 30” x 18” x 21” 5 PBEN30P 42 42” x 18” x 21” 6 PBEN42P 60 60” x 18” x 21” 8 PBEN60P TUXEDO BENCH – STYLE # TBEN Benches are constructed of ¾” solid plywood. Solid ¾” plywood legs are attached with “L” brackets. Benches have 3” thick foam cushion and are fully upholstered. TUXEDO BENCH – STYLE # TBEN SIZE DIMENSIONS YARDAGE CODE 30 30” x 18” x 21” 5 TBEN30 42 42” x 18” x 21” 5 TBEN42 60 60” x 18” x 21” 6 TBEN60

31

CUSHIONS

CUSHION COVER – sold by linear foot Labor to cover cushion FCU30 Labor to quilt cushion FCQ30 To figure linear feet: Divide cushion length by 12”= linear feet (Round to next whole number) Example: 54” divided by 12”= 4.5 linear feet, round to 5 linear feet. ESTIMATED YARDAGE REQUIRED

24” wide – 1 yd. 60” wide – 4yds. 36” wide – 2 yds. 72” wide – 4 yds. 48” wide – 3 yds. 84” wide – 5 yds.

OPTIONS AVAILABLE YARDAGE CODE Boxing – cushion sizes 2” and up (includes cording) call for yds. 1043FCBX Boxing, Shirred call for yds. 1042FCSS Buttons none 1040FCB Cut outs call for yds. 1066CO Fabrics, Matching Stripes and plaids call for yds. 1065CS Fabrics, some fabrics such as vinyl may require an upcharge. call for yds. Ruffle, gathered call for yds. 1052CSR Ruffle, pleated call for yds. 1052CSPR Template TEMP CUSHION FOAM – sold by square foot CODE 1” Thick foam FC1 2” Thick foam FC2 3” Thick foam FC3 4” Thick foam FC4 To figure square feet: Multiply length x width then divide by 144”= square feet (Round to next whole number) Example: 54” x 20” =1080” divided by 144”= 7.5 square feet, round to 8 square feet. Multiply answer by price of foam desired = cost of foam. CHAIRPAD CUSHION (18” x 14”) YARDAGE CODE 1” thick foam with ties and pencil welt 1 ½ yd. CPCUSH

32

BLOW-FILLED CHAIR CUSHIONS

Finished size approximately 18” wide, 14” deep and 3” thick. String ties and 4 circle tacks to simulate buttons. Sewn closed, no zipper. Note: Custom size or shaped for blow-filled cushions require a template and additional pricing. CHAIR CUSHION, PLAIN EDGE – STYLE# BFC Cushion with 4” tailored skirt. QUANTITY YARDAGE CODE 1 cushion 1 ¼ yds. BFC1 10 plus 1 ¼ yds. each BFC CHAIR CUSHION, RUFFLED SKIRT – STYLE # BFCR Cushion with 2” ruffled edge. QUANTITY YARDAGE CODE 1 cushion 1 ½ yds. BFCR1 10 plus 1 ½ yds. BFCR CHAIR CUSHION, TAILORED SKIRT – STYLE # BFCTS Cushion with plain edge. QUANTITY YARDAGE CODE 1 cushion 1 ¾ yds. (pattern not centered) BFCTS1 2 yds. (pattern centered) 10 plus 1 ¾ yds. (pattern not centered) BFCTS 2 yds. (pattern centered)

BAR STOOL CUSHION COVER

BAR STOOL CUSHION COVER – STYLE # BARST Round barstool cushion covers (unquilted) are blow-filled with 14oz. of fiberfill. 14” diameter, 3” thickness, 4” drop Bottom is gathered with elastic. 4 circle tacks to simulate buttons. QUANTITY YARDAGE CODE 1to 10 cushions 1yd. will make 3 cushions BARST1 10 plus 1yd. will make 3 cushions BARST

33

BOLSTERS AND NECKROLLS

NECK ROLL 6” x 18” (includes welt) YARDAGE CODE Neckroll – Cover only ¾ yds. NRC Neckroll – Unquilted(includes soft polyester fill) ¾ yds. NRU Neckroll Insert – Foam NR6x17 Neckroll Insert – Down like (poly fill) NRDL6x18 ROUND BOLSTER 8” x 36” (includes welt) Bolster cover - Unquilted 1 ½ yds RBCU Bolster Insert - Foam RBF Bolster Insert – Down like (poly fill) RBD8x36 Quilting option is available; yardage needs to be doubled when quilted. OPTIONS AVAILABLE Banding call for yds. 1069BND Banding, shirred call for yds. 1066TPSB Button ends 1040BB Labor to quilt, bolster 1 ½ yds. RBCQ Labor to quilt , neckroll ¾ yds. NRQ Ruffle, gathered 1 yd. 10039BR String tie ends 1041BST Stripes and plaids matched call for yds. 1065CS Trim, prefab cord (sewn in ) 1 ¾ yds. 1067BTR Trim, prefab trim (topstitched) 1 ¾ yds. 1045TPT Trim, self or contrast welt (neckroll) ¼ yd. 1067BC (round bolster) ¾ yd. Trim, self or contrast shirred welt (neckroll) ¾ yd. 1068BSC (round bolster) 1 yd. WEDGE BOLSTER 13” x 4” x 8” x 12” x 37” Bolster cover - Unquilted 2 yds WBCU Bolster Foam Insert WBF Quilting option is available; yardage needs to be doubled when quilted. 37” OVERALL LENGTH 8” BOTTOM WIDTH 4” TOP WIDTH 12” HEIGHT STRAIGHT SIDE (BACK) 13” HEIGHT SLANTED SIDE (FRONT) OPTION AVAILABLE Labor to quilt 2 yds. WBCQ 34

PILLOW SHAMS

Corded Flanged Ruffled PLAIN SHAM- STYLE # 100PSP Yardage CODE UNQUILTED 1 ½ yds. PSPU QUILTED 2 yds. PSPQ

PREFAB CORDED PILLOW SHAM – STYLE # 100PSPFC UNQUILTED Body 1 ½ yds. PSPFU Prefab cord 3 ½ yds. QUILTED Body 2 yds. PSPFQ Prefab cord 3 ½ yds. CORDED PILLOW SHAM- STYLE # 100PSW UNQUILTED, (¼” or ½” welt) 2 yds. PSWU QUILTED, (¼” or ½” welt) 2 ½ yds. PSWQ UNQUILTED, (¾” or 1” welt) 2 ½ yds. PSWIU QUILTED, (¾” or 1” welt) 2 ½ yds. PSWIQ

RUFFLED SHAM – STYLE # 100PSR UNQUILTED Body 1 ½ yds. PSRU Ruffle 1 ½ yds. QUILTED Body 2 yds. PSRQ Ruffle 1 ½ yds.

TOP-STITCH FALNGED PILLOW SHAM – STYLE # 100PSR All flanges are filled with polyester fiberfill unless otherwise noted. UNQUILTED 2 yds. PSFU QUILTED 2 ½ yds. PSFQ (Options available for flange shams only) Mitered corners 2 ½ yds. PSMIT Contrast Flange: unquilted and fiberfilled 2 ½ yds. 1024PSCF

BOXED SHAM- STYLE # 100PSBX UNQUILTED 3 yds. PSBXU QUILTED 3 ½ yds. PSBXQ

OPTIONS AVAILABLE YARDAGE CODE Banding 1 yd. PSB Banding, shirred 1 yd. PSSB Contrast fabrics Each side 1 ½ yds. Double ruffle 2 yds. PSDRUF Envelope Front 2 ½ yds. PSENP Banding on envelope front 1 yd. PSBENV Knots on four corners 1 yd. PSKNT Lace Overlay call for yds. PSLO Ruffle, gathered 1 ½ yds. PSRUF Ruffle, Pleated 3 ½ yds. PSRBXP Welt, self or contrast (¼” to ½”) added to ruffle or flange sham 1 yd. PSWLT Welt, shirred (¼” to ½”) 1 yd. PSSWLT Welt, shirred (¾” to 1”) 1 yd. PSSJWLT For options on boxed shams please double yardage

35

PILLOW SHAM INSERTS PILLOW SHAM INSERTS- STYLE # PINSERT

“DOWN-LIKE” Bed pillow inserts have a polyester-cotton cover and filled with polyester fiberfill. Inserts have serged edges. SIZE CODE Twin/King 20” x 36” PIDLPST Full 20” x 26” PIDLPSF Queen 20” x 30” PIDLPSQ Euro 20” x 36” PIDLPSE

36

BLOW-FILLED TOSS PILLOWS AND TOSS PIILOW COVERS

Standard toss pillow covers have zipper closures. Patterns are centered on front of covers if enough fabric is provided. Toss pillow covers may be quilted or unquilted. Customer must specify pillow size. Pillow may be blow filled or have an insert placed inside cover. Pillows with insets have zipper closures. Pillows blow filled are sewn closed. Quilted pillows- customer must specify quilt pattern. NOTE: When making round pillows we suggest ruffled edges. We do not suggest plain or welt edge due to uneven appearance (dips). Standard ruffle is 3”.

BLOW-FILLED TOSS PILLOW – STYLE # RMTP Can be produced from COM remnants. Should customer want pattern to be matched the fabric should be sent to us in precut squares. Due to the price of this item we require a minimum quantity of 20 per order. Square pillow with pencil welt edge. Blow filled with polyester fill. Pillows are sewn closed. Fabric is cut randomly. CODE

BLOW FILLED TOSS PILLOW RMTP

YARDAGE REQUIREMENTS 1 ½ yards makes 3 –16” pillows

TOSS PILLOW COVERS-STYLE # 100TPC Pricing below does not include insert. See the following page for insert types and pricing. Pillows 12” – 16” Pillows 18” – 24” Pillows 26” – 34” Group 1 Welt, trim, ruffle or button center Group 2 Topstitch flange, band, mitered front, Shirred welt, Turkish corner Group 3 Boxed sides with welt, Shirred banding, pleated ruffle, Double ruffle, starburst or miter flange Group 4 Box pleated ruffle. Double ruffle with welt, pleated ruffle with Welt or miter flange with welt For items not listed or multiple combinations please submit a written quote

37

INSERTS

“DOWN LIKE” INSERT – STYLE # PIDL Synthetic fiber insert with simulated down look and feel. FEATHER/DOWN INSERT – STYLE # TPID 90% feather and 10% down insert. OUTDOOR SIZE DOWN LIKE DOWN LIKE 90/10DOWN QTY IN CASE 10” 30 12” 25 14” 15 16” 18 18” 14 20” 12 22” 10 24” 8 26” 4 27” 4 30” 4 36” 2 12” x16” 20 14” x 18” 16 16” x20” 16 16” x 18” 16 8” x 36”

PILLOW SHAM INSERTS- STYLE # PINSERT

“DOWN-LIKE” Bed pillow inserts have a polyester-cotton cover and filled with polyester fiberfill. Inserts have serged edges. SIZE CODE Twin/King 20” x 36” PIDLPST Full 20” x 26” PIDLPSF Queen 20” x 30” PIDLPSQ Euro 20” x 36” PIDLPSE

38

TABLE COVERS TABLE SQUARES/RECTANGLES Basic unlined with ½” folded single needle hem. YARDAGE Due to variations in sizes if requesting rectangle please fax or email for yardage quote.

CODE UNLINED – Up to 52” TSU52 UNLINED – 53”- 68” TSU68 UNLINED – 69”-104” TSU104 UNLINED – 105”- 125” TSU125 UNLINED – 126”- 144” TSU144 TABLECOVERS- ROUND OR SQUARE Pattern repeats are matched. Customer must specify finished size. Table cover may be lined or unlined. Hems are blind-stitched. STANDARD YARDAGE CODE UNLINED – Up to 50” 1 ½ yds. TCU50 LINED – Up to 50” 1 ½ yds. TCL50 UNLINED – 51”- 68” 5 yds. TCU68 LINED – 51”- 68” 5 yds. TCL68 UNLINED – 69”-104” 6 ½ yds. TCU104 LINED – 69”- 104” 6 ½ yds. TCL104 UNLINED – 105”- 125” 11 yds. TCU125 LINED – 105”- 125” 11 yds. TCL125 UNLINED – 126”- 144” 14 yds. TCU144 LINED – 126”- 144” 14 yds. TCL144 KIDNEY SHAPED - UNLINED 6 yds. TCKU LINED 6 yds. TCKL Note: If using table other than kidney table from Virginia Quilting customer must supply template. VANITY – UNLINED 6 yds. TCVU LINED 6 yds. TCVL SINK SKIRT – (yds. based on 36”W x 18” D x 36” drop) UNLINED (with Velcro) 4 ½ yds. SSV LINED (with Velcro) 4 ½ yds. SSLV TABLE RUNNER – (yds. based on 14” x 72” runner) UNLINED 2 ½ yds. TCRUN LINED 2 ½ yds. TCRUNL QUILTED 3 yds. TCRUNQ

39

OPTIONS AVAILABLE Banding, single row 2 ½ yds. 1037TCB Button TCBUT Fitted with box pleated drop call for yds. TCFITBP Fitted with shirred drop call for yds. TCFITS Fitted with straight drop call for yds. TCFITST Fitted with tailored drop or kick pleats call for yds. TCFITCK Interline (labor only) 1039TCINTL Ruffle, gathered single row 4 yds. 1036TCR Ruffle, pleated single row 1036TCPR Trim, COM call for yds. 1038TCT Trim, self or contrast welt 1 yd. (cut straight) 1034TCW ( ¼ ”, ½”, 3/8”, ¾”, 1”) 1 ½ yds. (cut bias) Trim, self or contrast shirred welt 3 yds. 1035TCSW ( ¼ ”, ½”, 3/8”, ¾”, 1”) Note: Shirred welt not recommended on unlined table covers only.

PLACEMATS AND NAPKINS

PLACEMATS – STYLE # PLMAT Placemats are 17” x 12” with poly fill for stability. Twin-line stitched on outer perimeter. Placemats may be purchased in Octagon, Oval or Rectangle shape. 1 to 11 (call for pricing over 12) PLMAT OPTIONS AVAILABLE (add to base price) Quilted (one side only) 1062PMQ 2” ruffle or welt 1063PMR YARDAGE REQUIREMENTS FOR 54” FABRIC 3 placemats = ¾ yard of fabric (pattern not centered) 3 placemats = ½ yard each NAPKINS - STYLE # NAP Napkins are 17” square and non-reversible. Serged edge are embroider –stitched to coordinate with background. 1 to 11 serged hem (call for pricing over 12) NAP 1 to 11 ¼” hem (call for pricing over 12) NAPHEM YARDAGE REQUIREMENTS FOR 54” FABRIC 3 napkins = ½ yard solid fabric

40

DRAPERIES, SWAGS, CASCADES, SHADES, VALANCES,

CORNICES, LAMBREQUINS. LININGS & SHEER

DRAPERY QUALITY NOTES

Rod pocket take up: This is the distance the drapery is shortened when shirred onto rod. Take up is equal to thickness of rod.

Rod pocket size Pocket Take up 2” wood pole 4” to 4 ½” 2” 1 3/8” round pole 2 ½” to 3” 1 3/8” 1” round pole 1 ¾” to 2” 1” ¾” round pole 1 ½” ¾” 1 ½” D pole 2 ¾” to 3” 1 ¼” Oval rod 1 ½” 1/8” 2 ½” Dauphine 3 ½” 1/8” 4 ½” Dauphine 5 ½” 1/8” ½” to 7/16” rod 1” ½” to 7/16” Continental rod add 1” to rod size

ALL ½ WIDTHS ARE CHARGED AS WHOLE WIDTHS.

WE DO NOT RECOMMEND USING BLACKOUT LINING ON LIGHT COLOR FABRIC DUE TO THE BLACKOUT SHOWING THRU AS SPOTS WHEN SEWN.

WE SUGGEST ALL FABRICS BE TREATED TO REPEL MOISTURE, UNTREATED FABRICS ARE UNSTABLE AND WILL CAUSE UNEVENESS IN PRODUCTAND CANNOT BE GUARANTEED BY VIRGINIA QUILTING.

42

Length 1. Ceiling to floor 2. Top of window to carpet 3. Top of window to baseboard 4. Top of window to apron (if any) 5. Top of window to sill (if any) 6. If you plan to mount between the

ceiling and the top of window, mark the place where it will be mounted and measure the distance from ceiling to mark.

Width 7. Casing width 8. Inside casing width 9. To nearest wall/window at left 10. To nearest wall/window at right 11. For draw drapes to completely

clear window when opened add casing width plus 1/3 of casing width.

12. For wider casing treatment, mark desired position of each end of rod and measure distance between.

Figuring Stackback on Drapes Stackback is the amount of wall space needed if open panels are to clear the glass completely. This dimension, added to the window opening, gives you the proper rod length. Begin by measuring the window opening, and then consult the Stackback chart. Find your opening measurement and read across the right rod length. This chart is based on average pleating and medium weight fabric. Deduct 7” from rod length if you are using a one-way draw. If using bulky fabric add to stackback accordingly It can vary 10% to 20%. You will have to add returns and overlaps to drapery coverage. This chart is based on average pleating and medium weight fabric. Window Opening Stackback* Rod length 24” 21” 45” 30” 23” 53” 36” 25” 61” 38” 26” 64” 42” 26” 68” 44” 28” 72” 48” 29” 77” 50” 30” 80” 54” 30” 84” 56” 31” 87” 60” 31” 91” 62” 32” 94” 66” 33” 99” 68” 33” 101” 72” 34” 106” 75” 36” 111” 78” 37” 115” 81” 37” 118” 84” 38” 122” 87” 38” 125” 90” 39” 129” 94” 42” 136” 96” 42” 138” 100” 42” 142” 102” 44” 146” 106” 46” 152” 108” 44” 152”

43

DRAPES ALL ½ WIDTHS ARE CHARGED AS WHOLE WIDTHS. Virginia Quilting uses a 4” double bottom hem as standard however we will automatically use single bottom hem in lined drapes if short of fabric at no extra charge to customer. If you do not want to have single bottom hem if shortage occurs please specify on your order. SHEER fabrics- Face width times fullness divided by 36” =yardage Widths are figured on 48”. In order to railroad, length of drape cannot exceed 100”. We do not recommend trims or banding on sheer fabric. CASEMENT (OPEN WEAVE) – there is an additional charge for this type of fabric. We cannot guarantee that there may not be snags in product due to fabrics delicate nature. Hems may also require single needle work instead of blind hems. We may also require using a fell seam in order to keep product from sloughing apart. These upcharges are made without notifications to customer. KRINKLE fabrics- Require an upcharge and length cannot be guaranteed. These fabrics tend not to hang straight. HEAVY WEIGHT fabrics- Require an upcharge. If pleated we cannot use a three prong pleat, and will require hand bonis. UNSTABLE fabrics- We will not guarantee any unstable fabrics, moisture and atmospheric changes will cause fabrics to shift in length, Virginia Quilting will not be responsible for fabrics or installation should the customer have a problem due to fabric choice. WE SUGGEST ALL FABRICS BE TREATED TO REPEL MOISTURE, UNTREATED FABRICS ARE UNSTABLE AND WILL CAUSE UNEVENESS IN PRODUCT AND CANNOT BE GUARANTEED BY VIRGINIA QUILTING. WE DO NOT RECOMMEND USING BLACKOUT LINING ON LIGHT COLOR FABRIC DUE TO THE BLACKOUT SHOWING THRU AS SPOTS WHEN SEWN. MATCH TOP DOWN – A majority of plaids will have some type of box or slant in pattern and can have variances in pattern repeat. At times we can match drape top down so the pattern is matched from top and variances in pattern match are more noticeable as you go down the drape; this process requires an upcharge due to additional table work. Customer will be notified of problem and additional charge in order to proceed. RIPPLEFOLD – ripplefold drapes are precise and require accurate information to produce. Customer must specify what rod system is being used, we as a standard use Kirsch tape. Graber is available when Graber rod is specified. We must know what type of master carrier is being used; overlap, butt, baton drawn with hook attachment, daton drawn with grommet attachment. Fullness requested for rod is required to determine drapery width, the drape panel tape is the same regardless of fullness the carrier placement in rod is the difference in fullness. HOURGLASS – is not a rod pocket top and bottom with tie back. An hourglass has correct length in center and is longer on sides. If you do not see product listed please contact us or send in picture for quote.

44

PINCH PLEATED – STYLE # DRPPD Recommend 2 ½ times fullness or 3 times fullness on sheers. Pattern matched, seamed with serger. Weights are placed in hem at seams and corners. 1 ½” side hems, 4” double bottom hem, blind stitched. 4” washable crinoline in top of drape. If lined – lining is to the top. Finished product is fan folded for shipping. French pleat – three prong tack at bottom is standard pleat. Standard 5 pleats per width. Customer must specify: Style # DRPPD

1. Pleated width including returns and overlap 3. Finished length 2. Return size 4. If panel, specify left or right return

French Euro 3 prong Inverted Butterfly Euro 2 prong Flemish Cartridge Box pleat Goblet

CODE PRICE CODE PRICE PINCH PLEATED UNLINED LINED French (standard) DRPPDU DRPPDL Euro 3 prong (tack at top) DEURO DEUROL Butterfly DBUTTER DBUTTERL Euro 2 prong (tack at top) DEURO2 DEURO2L Inverted pleat (3 prong to backside of panel) DINVERT DINVERTL Flemish DFLEM DFLEML 1” Tucked pleat (specify front or inverted) DTUCK DTUCKL Cartridge DCARTPL DCARTPLL Box pleat (four corners tacked down) DBOXPLEAT DBOXPLEATL Goblet DGOBPL DGOBPLL Eurpleat (2” crinoline) Parisean DPEURO DPEUROL YARDAGE REQUIREMENTS FOR 54" FABRIC Finished width times fullness divided by fabric width = no. of cuts Lined- Add 14" to finished length = cut length. Allow for repeat when figuring cut length Unlined- Add 18” to finished length = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36" = yardage BACK TAB ROD POCKET – STYLE# BACKTABRP Recommend 2 ½ times fullness or 3 times fullness on sheers. Pattern matched, seamed with serger. Weights are placed in hem at seams and corners. 1 ½” side hems, 4” double bottom hem, blind stitched. Pockets are sewn in with coordinating thread. Customer must specify:

1. Finished width 3. Pocket size 2. Finished length (with pocket and header) 4. Header size

CODE PRICE CODE PRICE

UNLINED LINED BACK TAB ROD POCKET DR DRD YARDAGE REQUIREMENTS FOR 54" FABRIC Finished width times fullness divided by fabric width = no. of cuts Top only- Finished length + 11"+ pocket and header = cut length. Allow for repeat when figuring cut length Top and bottom- Finished length + 11"+ pocket and header twice = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36" = yardage Allow ½ yard per width for tab 45

ROD POCKET – STYLE #DRDPKT ROD POCKET TOP AND BOTTOM – STYLE # DRDPKTTB Recommend 2 ½ times fullness or 3 times fullness on sheers. Pattern matched, seamed with serger. Weights are placed in hem at seams and corners. 1 ½” side hems, 4” double bottom hem, blind stitched. Pockets are sewn in with coordinating thread. Customer must specify:

1. Finished width 3. Pocket size 2. Finished length (with pocket and header) 4. Header size

CODE PRICE CODE PRICE

UNLINED LINED ROD POCKET DRDPKTU DRDPKTL ROD POCKET TOP AND BOTTOM DRDPKTTBU DRDPKTTBL YARDAGE REQUIREMENTS FOR 54” FABRIC Finished width times fullness divided by fabric width = no. of cuts Top only- Finished length + 11”+ pocket and header = cut length. Allow for repeat when figuring cut length Top and bottom- Finished length + 11”+ pocket and header twice = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36” = yardage HOURGLASS ROD POCKET- STYLE # HRGLASS Recommend 2 ½ fullness. Top and bottom pocket sewn in with coordinating thread. 3” maximum header. Width cannot exceed length. Finished length includes take up. Tie back sold separately. (See page 59) Suggest using soft drapery fabric, sheer or lace. Customer must specify:

1. Finished width 3. Pocket size 2. Finished length 4. Header size

CODE PRICE CODE PRICE

UNLINED LINED HOURGLASS HRGLASSU HRGLASSL YARDAGE REQUIREMENTS FOR 54” FABRIC Finished width times 2 ½ divided by fabric width = no. of cuts Finished length + 11”+ pocket and header four times = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36” = yardage

RIPPLEFOLD DRAPES can be produced by Virginia Quilting. We are one of the largest fabricators of ripplefold drapery in the USA. Please contact the Drapery Department for information before ordering rods for ripplefold drapes, we need to coordinate drapery rods to ensure quality fit and function.

CODE PRICE CODE PRICE

UNLINED LINED RIPPLE FOLD DR DR Ripplefold drapes are precise and require accurate information to produce. Customer must specify what rod system is being used, we as a standard use Kirsch tape. Graber is available when Graber rod is specified. We must know what type of master carrier is being used; overlap, butt, baton drawn with hook attachment, baton drawn with grommet attachment. Fullness requested for rod is required to determine drapery width, the drape panel tape is the same regardless of fullness the carrier placement in rod is the difference in fullness. SUBMIT QUOTE FOR YARDAGE REQUIREMENTS

46

FLAT PANELS - STYLE # DFPR Recommend 1 1/2 to 2 times fullness. Fabric patterns are matched. 1 1/2" blind-stitched double side hems.4" double turned, blind stitched bottom hems. Weights are placed in hems at seams and corners. 4” double turned top. No crinoline in top unless specified by customer. Customer must supply rings. Customer must specify:

1. Number of widths 3. Lined or unlined 2. Finished length 4. Number of rings or distance between rings

CODE PRICE CODE PRICE UNLINED LINED FLAT PANEL (Price includes Buckram) FPRU FPRL YARDAGE REQUIREMENTS FOR 54" FABRIC Finished width times fullness divided by fabric width = no. of cuts Add 18" to finished length = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36" = yardage GROMMET TOP PANELS - STYLE # DGROM Recommend 1 1/2 to 2 times fullness. Fabric patterns are matched. 1 1/2" blind-stitched double side hems.4" double turned, blind stitched bottom hems. Weights are placed in hems at seams and corners. 4” double turned top. Crinoline in top. Standard 8 grommets per width. Customer must specify:

1. Number of widths 4. 1” inside diameter or 1 9/16” inside diameter grommet 2. Finished length 5. Panels (left or right) 3. Lined or unlined 6. Color of grommet

CODE PRICE CODE PRICE UNLINED LINED GROMMET PANEL DGROMU DGROML YARDAGE REQUIREMENTS FOR 54" FABRIC Finished width times fullness divided by fabric width = no. of cuts Add 18" to finished length = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36" = yardage SHOWER CURTAIN – Style # SHWRCTN Standard shower curtain is 72”W x 72” L. Twelve (3/8”) grommets are standard. 2” double turned crinoline in top. 1 ½” double turned side hems.4” double turned bottom hems. Weights are placed in hem at seams and corners. The width of the shower curtain will be cut off the right side unless otherwise specified. Customer must specify:

1. Nickel or brass grommets 2. Lined or unlined 3. Finished length and width if not standard size

CODE PRICE CODE PRICE UNLINED LINED SHOWER CURTAIN DSHWRCTNU DSHWRCTNL YARDAGE REQUIREMENTS FOR 54" FABRIC Finished width + 6” for side hems divided by fabric width = no. of cuts Add 14" to finished length = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36" = yardage

47

SMOCKED TOP – STYLE # DSMOCK Drapes can be hung on rod or board mounted. Recommend 3 times fullness. Only light to medium weight fabric should be used. Do not recommend heavy lining or interlining. 1 ½” double turned side hems. 4” double turned bottom hems. Weights are placed in hem at seams and corners. Smocking tapes are pictured under options. Tape is sewn in with coordinating thread. Customer must specify: 1. Finished width 3. Lined or unlined 2. Finished length 4. Tape style

CODE PRICE CODE PRICE UNLINED LINED SMOCKED TOP DSMOCKU DSMOCKL YARDAGE REQUIREMENTS FOR 54" FABRIC Finished width times fullness divided by fabric width = no. of cuts Lined- Add 14" to finished length = cut length. Allow for repeat when figuring cut length Unlined- Add 18” to finished length = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36" = yardage TAB DRAPES – STYLE # DTBD If lined -tabs are pillow cased between face and lining then drape is topstitched 1/8” from top. If unlined – a facing is placed on back to cover tabs then drape is topstitched 1/8” from top. Recommend 1 ½ to 2 times fullness. 1 ½” double turned side hems. 4” double turned bottom hems. Weights are placed in hem at seams and corners. Finished length includes tabs. Standard tab is 1 ½” x 4” and we use 8 tabs per width. Tab placement starts flush at corners. Customer must specify:

1. Finished width 3. Width and length of tabs (if not standard) 2. Finished length (including tab) 4. Number of tabs (if not standard)

CODE PRICE CODE PRICE

UNLINED LINED TAB DTBDU DTBDL YARDAGE REQUIREMENTS FOR 54" FABRIC Finished width times fullness divided by fabric width = no. of cuts Finished length + 12” = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36" = yardage Tabs - ½ yards times no. of cuts divided by 36” WAVE TAPE PANELS - STYLE # DFPR Recommend 2 to 2 ½ times fullness. Fabric patterns are matched. 1 1/2" blind-stitched double side hems.4" double turned, blind stitched bottom hems. Weights are placed in hems at seams and corners. 4” double turned top. Transparent crinoline topstitched to back of panel header. Plastic pin hooks sent with drapes. Customer must specify: 1. Number of widths 3. Lined or unlined 2. Finished length 4. Number of rings or distance between rings CODE PRICE CODE PRICE UNLINED LINED WAVE TAPE PANEL (Price includes Buckram/Pins) YARDAGE REQUIREMENTS FOR 54" FABRIC Finished width times fullness divided by fabric width = no. of cuts Add 18" to finished length = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36" = yardage

48

CUFFED DRAPES There are three styles of Cuffed Drapes available. For all styles, fullness is 2 times. Note specifics of each style.

SCALLOPED CUFF DRAPES CODE PRICE CODE PRICE UNLINED LINED DSCUFFU DSCUFFL This cuff top drape is a flat panel with a 3” scalloped band attached. May have a self or contrast cuff and includes small welt at bottom of cuff. May have ties, pins or sew on rings (additional charge applies). CROWN CUFF DRAPES CODE PRICE CODE PRICE UNLINED LINED DCCUFFU DCCUFFL The banding is faced at the top and 4” to the back of the drape and pulls forward when hung. Fabric loops are .75” wide x 3” long, sewn on back 2.5” down from top to accommodate 1 3/8” rod. Loops spaced 14” to 16” apart (approximately 4 loops per width) positioned for no projection or overlap. EUROPEAN CUFF DRAPES CODE PRICE CODE PRICE UNLINED LINED DECUFFU DECUFFL 3” self or contrast cuff at top, formed at installation. Recommend sew on rings (additional charge applies) since no buckram. Optional rings sewn 14” to 16” apart (approximately 4 rings per width), positioned for 3.5” projection and no overlap. YARDAGE REQUIREMENTS FOR 54” FABRIC Finished width times fullness divided by fabric width = no. of cuts Add 18" to finished length = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36" = yardage

49

OPTIONS AVAILABLE CODE PRICE Attached Valance DVAL Attached swags (Bustle swag) DBUSTLE Banding, bias cut DBBND Banding, cut and press (topstitched) DBND Banding, mitered DBNDM Banding, shirred or pleated DBNDSHR Banding, wrapped DBW Bows DBOW Buttons DCOMBUT Buttons, sew on COM buttons DRING Button holes (1 3/8”) DBH Button holes, Over size (Over 1 3/8”) DOBH Chain weights in hem DWEIGHT COM chain weight DCOMWEIGHT Cut outs DCUTOUT Fabric, Casement drape fabric DCPPD Fabric, Customer’s own lining DCOL Fabric, Heavy fabric, upholstery weight or velvet DDUV Fabric, Sheets (no guarantee) DSHEET Facing hems or headers DFH French Seams DFS Hem, Hand sewn DHNDHEM Hem, Pillow cased DPC Hem, Non standard hem DNONHEM Interline drapes DINT Panel 4 to 8 widths wide DPAN8 Panel over 8 widths wide DPANOV8 Ruffle, gathered DRFL Ruffle, pleated DRFLPLT Rings, sew on COM rings DRING Trim/cording DCDTRIM Trim, beaded DCDTRIMB Trim, Hand sewn DCDHSTRIM Velcro DVEL Special Cutting or matching may be subject to extra charge up to 35% DSPEC (Virginia Quilting to confirm before processing order)

(a) Matching top down (b) Cutting crushed or pleated fabric (c) Cutting, matching certain patterns, or pattern placement (d) Working with scraps

Lengths over 110” 110” – 144” DOVR108 144” – 200” DOVR144 200” – 250” DOVR200 NOTE : Over size charge on grommet panels based on flat panel width charge

Additional Options for pinch pleat Non-standard pleat and hand pleating DHNDPL Non-standard crinoline DCRINOLIN5 Pinning (all pins are stainless steel) DPNG Sewing on stiffener DSTIFF

Additional Options for Rod Pocket Drapes Additional pockets DDPRDPKT Contrast pocket DCONPKT Contrast header DCONHEAD Cut out pocket and header for return DRDPCUT Header over 3” DOVERHD 50

Additional options for Grommet Top Panels Extra grommets – over 8 grommets per width DGROML 2.5” Inside Diameter Grommet DXLGROM Additional Options for Shower Curtain Attached valance, flat DSHVALF Attached valance, gathered DSHCVALG Extra grommets DGOVR12 Flat placket DFPLACKET Gathered placket (a shower curtain shirred and sewn into a flat band at top) DGPLACKET Additional Options for Smocked Top Drapes Board Mounted DBM Double row of tape ST2 4” Broken Pencil Pleat ST002 4” Pencil Pleat ST001 1” Pencil Pleat ST005 4” Diamond Pleat ST004 4” Up – Down Pleat ST003

4” Shirring Tape ST006 2” Shirring Tape ST007

Additional Options for Tab Top Drapes Gathered tabs DGTAB Matching ties DTIE Matching tabs DTAB Non-standard number of tabs DNONTABNUM Non-standard size of tabs DNONTABSIZE

51

TIEBACKS

Banded Braided Bow TBKSH TBKBR TBKBOW ½ yard each fabric ½ yard each section 1 yard

Corded Jumbo Welt Ruffled TBKCRD TBKJB TBKR ½ yard 1 yard Shaped Shirred Shoestring TBKSH TBKSHR TBKSS Straight Streamer TBKST TNKSTR Unless otherwise stated on the work order, the standard for tiebacks is as follows:

a. Width – 4” b. Length – 20” for a one width panel

26” for a 1 ½ width panel 36” for a 2 width panel

44” for a 2 ½ width panel 48” for a 3 width panel 52” for a 3 ½ width panel

52

Not pictured

Not pictured

WINDOW TREATMENT WORKSHEET QUALITY NOTES

Rod pocket take up: This is the distance the product is shortened when shirred onto rod. Take up is equal to thickness of rod. Rod pocket size Pocket Take up 2” wood pole 4” to 4 ½” 2” 1 3/8” round pole 2 ½” to 3” 1 3/8” 1” round pole 1 ¾” to 2” 1” ¾” round pole 1 ½” ¾” 1 ½” D pole 2 ¾” to 3” 1 ¼” Oval rod 1 ½” 1/8” 2 ½” Dauphine 3 ½” 1/8” 4 ½” Dauphine 5 ½” 1/8” ½” to 7/16” rod 1” ½” to 7/16” Continental rod add 1” to rod size

53

Length 13. Ceiling to floor 14. Top of window to carpet 15. Top of window to baseboard 16. Top of window to apron (if any) 17. Top of window to sill (if any) 18. If you plan to mount between the

ceiling and the top of window, mark the place where it will be mounted and measure the distance from ceiling to mark.

Width 19. Casing width 20. Inside casing width 21. To nearest wall/window at left 22. To nearest wall/window at right 23. For draw drapes to completely

clear window when opened add casing width plus 1/3 of casing width.

24. For wider casing treatment, mark desired position of each end of rod and measure distance between.

Figuring trim on swags and cascades Formula to figure trim on cascades Trim needed for slanted edge Face width + long point x 1.5 (formula is for one cascade) If trim is applied to short point add length of short point to above Formula to figure trim on swags – per swag Swag face + drop of swag x 1.5 Pricing Calculation Formulas (when fractional footage is required we round up to nearest whole board foot or square foot) Square foot Example Finished width x finished length = total inches 42” x 63”=2646” divided by 144” = 18.37 sq. ft. Total inches are divided by 144” = Square footage You will be charged 19 square feet Board foot Example Finished width divided by 12” = board foot 42” divided by12”= 3.5 feet You will charged for 4 board feet

54

SWAGS

Suggested number of swags on board 36” - 48” - 1 swag 151” – 175” - 6 swags 49” – 70” - 2 swags 176” – 200” - 7 swags 71” – 100” - 3 swags 201” – 225” - 8 swags 101” – 125” - 4 swags 226” – 250” - 9 swags 126” – 150” - 5 swags 251” – 275” - 10 swags We do not recommend banding on swags BELL SWAG – STYLE # DSWGBELL Swags are rod-mounted. Swag must be lined. Swag should be cut on bias unless otherwise stated. May be made with or without header. Maximum width of 1 bell swag is 26” wide x 18” drop. Customer must specify:

1. Pocket or header size 2. Drop of swag

CODE Style # DSWGBELL BELL SWAG DSWGBELL (shown with ruffle option) YARDAGE REQUIREMENTS FOR 54” FABRIC Allow 2 yards per swag BOXED SWAG – STYLE # DSWGB Swag must be board mounted with legs on each side. Swag must be lined. There should be no more than 2” to 3” difference in long point and short point. Recommend 16” to 24” drop on swag. Box swags are cut on straight. This item is only available up to 60” wide. Can be used with cascades or side panels. Customer must specify

1. Face width of board 3. Short point on side 2. Drop of swag 4. Return size Style # DSWGB

CODE BOXED SWAG DSWGB YARDAGE REQUIREMENTS FOR 54” FABRIC Two cuts times 2 ½ times the drop = yardage per swag BUSTLE SWAG - STYLE # DBUSTLE These swags are usually placed in front of drape panel and are hand sewn onto drape or hung with rings. Swag must be lined. These have to be used with stationary drapes and we do not recommend using on drape panel wider than 40”. Drop is approximately 20” long. Customer must specify Style # DBUSTLE

1. Face width of drape panel

CODE

BUSTLE SWAG DBUSTLE YARDAGE REQUIREMENTS FOR 54” FABRIC Allow 2 yards per swag 55

Suggested number of swags on board 36” - 48” - 1 swag 151” – 175” - 6 swags 49” – 70” - 2 swags 176” – 200” - 7 swags 71” – 100” - 3 swags 201” – 225” - 8 swags 101” – 125” - 4 swags 226” – 250” - 9 swags 126” – 150” - 5 swags 251” – 275” - 10 swags We do not recommend banding on swags GATHERED SWAG – STYLE # DSWGG Swags are board mounted. Swag must be lined. Swag should be cut on bias unless otherwise stated. Number of folds depends on drop. Recommend 11” – 24” drop on swags. We do not recommend sheer fabric. Customer must specify:

1. Face width of swag 3. Drop on swags 2. Number of swags 4. Return size

CODE Style # DSWGG GATHERED SWAG DSWGG YARDAGE REQUIREMENTS FOR 54” FABRIC Allow 2 yards per swag PINCHED SWAG – STYLE # DSWGP Swags are board mounted. Swags must be lined. Swags cut on bias unless otherwise stated. Number of folds depends on drop. Recommend 11” –24” drop on swags. We do not recommend sheer. Customer must specify

1. Face width of board 3. Drop on swags 2. Number of swags 4. Return size

Style # DSWGP CODE (shown with cascade option)

PINCHED SWAG DSWGP YARDAGE REQUIREMENTS FOR 54” FABRIC Allow 2yards per swag POLE SWAG - STYLE # DSWAGPC Swag can be mounted on pole with tack strip or Velcro. Queen Anne style swag is used. Swag must be lined. Swags are cut on bias. Number of pleats depends on drop. Recommend 16” – 24” drop on swag. Opening size from top of pole to swag is approximately 4”. We do not recommend sheer fabric. Customer must specify

1. Face width 4. Size of pole to be used 2. Number of swags 5. If Velcro or tack strip is to be used Style # DSWAGPC 3. Drop of swags (shown with cascade option)

CODE

POLE SWAG DSWAGPC YARDAGE REQUIREMENTS FOR 54” FABRIC Allow 2 yards per swag 56

Suggested number of swags on board 36” - 48” - 1 swag 151” – 175” - 6 swags 49” – 70” - 2 swags 176” – 200” - 7 swags 71” – 100” - 3 swags 201” – 225” - 8 swags 101” – 125” - 4 swags 226” – 250” - 9 swags 126” – 150” - 5 swags 251” – 275” - 10 swags We do not recommend banding on swags SCARF SWAG – STYLE # DSWGSC This item is made in one piece that can be draped over pole or finials. Can be self or contrast lined. Ends will be angled at 12” each unless otherwise specified. We recommend using small prints or fabrics that can be used in both directions. Customer must specify tip-to-tip measurements or give face width of window and cascade long point. CODE Style # DSWGSC SCARF SWAG – UNLINED DSWGSCU SCARF SWAG – LINED DSWGSCL SCARF SWAG (board mounted) DSWSCM SCARF SWAG (with shirring tape) DSWGSHR YARDAGE REQUIREMENTS FOR 54” FABRIC Width of window + cascade length twice = tip to tip measurement Add 3” to tip to tip measurement divide by 36”= yards required TURBAN SWAG – STYLE # DSWTBN Always two swags mounted on board with legs on each side. Swags must be lined. Swags are cut on bias if possible. Swags are hand pleated. We recommend the width to be no more than 80” wide. Customer must specify:

1. Face width of board 2. Drop of swags Style # DSWTBN 3. Short point on sides 4. Return size

CODE TURBAN SWAG DSWTBN YARAGE REQUIREMENTS FOR 54” FABRIC Allow 2 ¾ yards per swag QUEEN ANNE SWAG- STYLE DSWGQA Swags are board mounted. Swags must be lined. Swags cut on bias unless otherwise stated. Number of folds depends on drop. Recommend 11” –24” drop on swags. We do not recommend sheer. Customer must specify:

1. Face width of board 3. Drop of swags 2. Number of swags 4. Return size

CODE Style# DSWGQA QUEEN ANNE SWAG SWGDQA YARAGE REQUIREMENTS FOR 54” FABRIC Allow 2 yards per swag

57

OPTIONS AVAILABLE CODE PRICE Banding, cut and press (topstitched) (DO NOT RECOMMEND) DBND Banding, wrapped (DO NOT RECOMMEND) DBW Cascades (See next page) Cover brackets DSWCBRACKETS Cover pole ends – finials DSWCFINIAL Cover wood pole DSWCVRPOLE Fabric, using sheets (No Guarantee) DSHEET Fan fold FFOLD Hem, shirttail DSTHEM Hinge board DHINGE Interline swags DSWGI Jabots (See next page) Knots DKNOT Making pattern DMP Miter board DMB Pelmets (See next page) Rosettes DROSETTES Ruffle, gathered DRFL Ruffle, pleated DRFLPLT Tack strip DTACK Trim, prefab trim DCDTRIM self or contrast welt Trim, beaded trim DCDTRIMB Velcro DVEL Special Cutting or matching may be subject to extra charge up to 35% DSPEC (Virginia Quilting to confirm before processing order)

(a) Matching top down (b) Cutting crushed or pleated fabric (c) Cutting, matching certain patterns, or pattern placement (d) Working with scraps or off quality fabrics (e) Upholstery fabric

DROPS OVER 24” LONG AND/OR WIDE INDIVIDUAL SWAGS CALL FOR QUOTE Formula to figure trim on swags – per swag Swag face + drop of swag x 1.5

58

CASCADES – JABOTS/PELMETS

Cascades

Double Stacked Traditional Jabots/Pelmets

Cone Pleated Tie Circle Double Inverted Cascade face will be ¼ the width of swag unless otherwise specified. Cascade must be self or contrast lined. Return on cascades will be square unless otherwise specified by customer. Cascades are pattern matched. We do not recommend sheer for cascades. We do not recommend dark fabrics for lining when using light colored face fabric. We suggest interlining. Customer must specify:

1. Face width of cascade 4. Short point of cascade 2. Style of cascade 5. Long point of cascade 3. Placement of cascade 6. Return size

If using stripe fabric, additional fabric and/or timework may be required if special placement of stripe is requested. If not requested, Virginia Quilting will use best judgment to place stripes. CODE PRICE CASCADE TO 42” DCSCDTO42 CASCADE 42” TO 84” DCSCD42TO84 CASCADE OVER 84” DCSCDOVR84 DOUBLE CASCADES TO 42” DCTO42 DOUBLE CASCADES 43” TO 84” DDCSCD42TO84 DOUBLE CASCADES OVER 84” DCOVR84 JABOT/PLEMET CIRCLE JC JABOT/PELMET CONE JCONE JABOT/PELMET DOUBLE INVERTED JDI JABOT/PELMET FLAT JF JABOT/PELMET PLEATED JP JABOT/PELMET ROUNDED JR JABOT/PELMET TIE JT YARDAGE REQUIREMENTS FOR 54” FABRICS Finished length + 4” = cut length. Allow for repeat when figuring cut length Cut length times 2 divided by 36” = yardage Same amount of yardage required for lining. Formula to figure trim on cascades Trim needed for slanted edge Face width + long point x 1.5 (formula is for one cascade) If trim is applied to short point add length of short point to above 59

OPTIONS AVAILABLE CODE PRICE Banding, cut and press (topstitched) (DO NOT RECOMMEND) DBND Banding, wrapped (DO NOT RECOMMEND) DBW Cover brackets DSWCBRACKETS Cover pole ends – finials DSWCFINIAL Cover wood pole DSWCVRPOLE Fabric, using sheets (No Guarantee) DSHEET Face cascades DSWCSCDFACE Fan fold FFOLD Hem, shirttail DSTHEM Hinge board DHINGE Interline cascades DCSCDI Knots DKNOT Making pattern DMP Miter board DMB Rosettes DROSETTES Ruffle, gathered DRFL Ruffle, pleated DRFLPLT Tack strip DTACK Trim, prefab trim DCDTRIM self or contrast welt Trim, beaded trim DCDTRIMB Velcro DVEL Special Cutting or matching may be subject to extra charge up to 35% DSPEC (Virginia Quilting to confirm before processing order)

(a) Matching top down (b) Cutting crushed or pleated fabric (c) Cutting, matching certain patterns, or pattern placement (d) Working with scraps or off quality fabrics (e) Upholstery fabric

Formula to figure trim on cascades Trim needed for slanted edge Face width + long point x 1.5 (formula is for one cascade) If trim is applied to short point add length of short point to above

60

SHADE OR VALANCE

SHADES CANNOT BE HINGED, IF OVER 72” SHADE WILL HAVE TO SHIP FEDEX OVERSIZE CHARGE OR FREIGHT. We suggest using multiple shades if wider area needs to be covered. Multiple rollease may be needed for wide shades. MINIMUM WIDTH ON OPERABLE SHADES: Rollease is 24” with 3 cords and RBS is 19” with 3 cords Flaps are made with face fabric and attached on the return of shades to cover hardware. Cord controls are on the right unless otherwise specified.

AUSTRIAN SHADE OR VALNCE – STYLE # DAUS

Mounted on boards covered with lining. Scallops are 9” to 12” apart. 1 ½” side hems. Fabricated with 1” shirring tape. Customer must specify:

1. Face width 3. Return size 5. Inside or outside 2. Finished length 4. Lined or unlined

CODE Style # DAUS AUSTRIAN SHADE OR VALANCE DAUS YARDAGE REQUIREMENTS FOR 54” FABRIC Width including returns times 1 ½ divided by fabric width = no. of cuts Cut length is 2 ½ times the finished length (3 times for sheers) Allow for repeat when figuring cut length Multiply number of widths times cut length divided by 36” = yardage BALLOON SHADE OR VALANCE- STYLE # DBAL Mounted on board covered with lining. Recommend 3 times fullness. There are 2 poufs per width. 1 ½” bottom hem, blind stitched. 3/8” brass rod in bottom hem of shade. There is approximately 9” to 12” between pleats. Rings are approximately 8” to 10” apart vertically. Minimum return size is 1 ½”. Customer must specify:

1. Face width 3. Return size 5. Inside or outside 2. Finished length 4. Lined or unlined

CODE Style # DBAL BALLOON SHADE OR VALANCE DBAL

YARDAGE REQUIREMENTS FOR 54” FABRIC Width times 2 ½ fullness divided by fabric width = no. of cuts Length + 25” = cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage FLAT ROMAN SHADE OR VALANCE – STYLE # DRMNSHD Mounted on board covered with lining. May be mounted inside or outside. 1 ½ side hems. We may pillowcase hem to save fabric or if using heavy fabric. 4” bottom hem. Minimum projection is 1 ½”. Rings are spaced approximately 8” apart vertically, 8” to 12” apart horizontally. Customer must specify:

1. Face width 3. Return size 5. Inside or outside 2. Finished length 4. Lined or unlined

CODE Style# DRM FLAT ROMAN SHADE OR VALANCE DRMN YARDAGE REQUIREMENTS FOR 54” FABRIC Width + 6” divided by fabric width = no. of cuts Shade length + 10”= cut length. Allow for repeat when figuring cut length Valance length + 26” = cut length. Allow for repeat when figuring cut length No. of cuts times cut length divided by 36”= yardage 61

LONDON SHADE OR VALANCE – STYLE # DLONDON

Mounted on boards covered with lining. Two pleats on shade. May be lined or unlined. Maybe inside or outside mount. 1” side hems. We may pillowcase hem to save fabric or if using heavy fabric. 4” bottom hem. Minimum projection is 1 ½”.

Customer must specify: 1. Face width 3. Return size 5. Inside or outside Style # DLONDON 2. Finished length 4. Lined or unlined

CODE LONDON SHADE DLONDON

YARDAGE REQUIREMENTS FOR 54” FABRIC Width + 36” divided by fabric width = no. of cuts Length + 25” = cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage RELAXED ROMAN SHADE OR VALANCE – STYLE # DRELRM

Mounted on boards covered with lining. Rings are on side hems only. May be lined or unlined. Maybe inside or outside mount. Rings are spaced approximately 8” apart vertically. 1” side hems. 4” bottom hem. Minimum projection is 1 ½”.

Customer must specify: 1. Face width 3. Return size 5. Inside or outside Style # DRELRM 2. Finished length 4. Lined or unlined

CODE RELAXED ROMAN SHADE DRELRM

YARDAGE REQUIREMENTS FOR 54” FABRIC Width + 4” divided by fabric width = no. of cuts Length + 20” = cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage SOFT FOLD ROMAN SHADE OR VALANCE- STYLE# DRMNSHD-SF

Mounted on board covered with lining. May be mounted inside or outside. 1 ½ side hems. We may pillowcase hem to save fabric or if using heavy fabric. 4” bottom hem. Minimum projection is 1 ½”. Rings are spaced approximately 8” apart vertically, 8” to 12” apart horizontally.

Customer must specify: 1. Face width 3. Return size 5. Inside or outside mount 2. Finished length 4.Lined or unlined

CODE Style # DRMNSHD-SF SOFT-FOLD ROMAN SHADE OR VALANCE DRMNSHD-SF

YARDAGE REQUIREMENTS FOR 54” FABRIC Width +4” divided by fabric width = no. of cuts. Shade length times 2 + 10” (Valance 3 times the length)= cut length. Allow for repeat when figuring cut length Cut length times no. of cuts needed divided by 36"

62

SMOCKED CLOUD SHADE OR VALANCE – STYLE # DCLDSHD-S Mounted on board. Recommend 3 times fullness. Velcro shirring tape used for smocking effect. May be inside or outside mount. Minimum return size 1 ½”. Finished length includes header. 1” side hem, 1 ½” bottom hem. 3/8” brass rod in bottom hem of shade Please order multiple shades if area is wider than 96” is needed.

Customer must specify: 1. Face width 3. Return size 5. Inside or outside mount Style # DCLDSHD-S 2. Finished length 4.Lined or unlined

CODE SMOCKED CLOUD SHADE OR VALANCE DCLDSHD-S YARDAGE REQUIREMENTS FOR 54” FABRIC Width times 3 fullness divided by fabric width = no. of cuts Length + 25”= cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage TAPERED BALLOON SHADE OR VALANCE – STYLE # DTPRB Mounted on board. Recommend 3 times fullness. Velcro shirring tape used for smocking effect. May be inside or outside mount. Minimum return size 1 ½”. Finished length includes header. 1” side hem, 1 ½” bottom hem. 3/8” brass rod in bottom hem of shade Please order multiple shades if area is wider than 96” is needed.

Customer must specify: 1. Face width 3. Short point 5. Return size Style # DTPRB 2. Long point 4.Lined or unlined

CODE TAPERED BALLOON SHADE OR VALANCE DTPRB YARDAGE REQUIREMENTS FOR 54” FABRIC Width times 2 ½ fullness divided by fabric width = no. of cuts Length + 25”= cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage TUCKED ROMAN SHADE - STYLE # DTRS Mounted on board covered with lining. Tucks can be sewn to front or back and spaced approximately 4” apart. Side is pillow cased. 4” bottom hem straight stitched. Customer must specify:

1. Face width 4. Lined or unlined 2. Finished length 5. Inside or Outside Mount 3. Return size 6. Tucks to front or back

CODE STYLE # DTRS

TUCKED ROMAN SHADE OR VALANCE DTRS YARDAGE REQUIREMENTS FOR 54” FABRIC Width +6” divided by fabric width = no. of cuts Length times 1 ½ + 10”= cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage

63

OPTIONS AVAILABLE CODE PRICE Banding, bias cut DBBND Banding, cut and press (topstitched) DBND Banding, mitered DBNDM Banding, shirred or pleated DBNDSHR Banding, wrapped DBW Buttons DBUT Fabric, Sheets (no guarantee) DSHEET Hem, Hand sewn DHNDHEM Hinge board (valances only) DHINGE Interline shade (labor only) DSHDI Rollease (first 4 feet) or Roman Blind System DROLLEASE Rollease (each additional foot) or Roman Blind System DROLLEASEFT Roman Shade Valance DTVR Ruffle, gathered DRFL Ruffle, pleated DRFLPLT Scallop – bottom DSCALLOP Trim/cording DCDTRIM Trim, beaded DCDTRIMB Velcro DVEL Special Cutting or matching may be subject to extra charge up to 35% DSPEC (Virginia Quilting to confirm before processing order)

(a) Matching top down (b) Cutting crushed or pleated fabric (c) Cutting, matching certain patterns, or pattern placement (d) Working with scraps

Additional Options for Balloon and London Shade or Valance Contrast pleat DSHCONPLT Additional Options for Smocked Cloud 4” Broken Pencil Pleat ST002 4” Pencil Pleat ST001 1” Pencil Pleat ST005 4” Diamond Pleat ST004 4” Up – Down Pleat ST003

4” Shirring Tape ST006 2” Shirring Tape ST007

64

SHADE SYSTEMS

ROLLEASE SHADE CLUTCH SYSTEM - STYEL # ROLLEASE HOW IT WORKS - One raises or lowers the shade by pulling on either side of the continuous control cord. This releases the clutch allowing easy repositioning of the shade. When one stops pulling down on control cord, the clutch automatically holds the shade securely in position. The rollease system keeps shades hanging level by wrapping individual lift cords around a rotating and traversing shaft. The system can be specified with either left-hand or right-hand control. SPECIFICATIONS Maximum shade weight: 30 pounds (Standard Clutch) 15 pounds (Slim Clutch) Maximum shade drop: 12 feet when using recommended 0.9mm lift cord Maximum shade width: Unlimited- provided shade is 30 pounds or less Minimum board return size: Standard clutch and brackets are 2 1/8” wide Slim Clutch and brackets are 1 ½” wide Warranty: 5 year warranty on clutch ROMAN BLIND SYSTEM – STYLE # RBS

The Roman Blind System (RBS) is a manually operated mechanism for raising and lowering shades. By simply pulling on a continuous loop the operator can easily and precisely position any shade weighing up to 40 pounds. The system can be specified with either left-hand or right-hand control. The product has an elegant shaped aluminum profile with integrated Velcro hook tape. Simple wall and ceiling mount installation. Head rail is extruded aluminum with powder coated white finish. Maximum shade weight: 40 pounds Minimum return size: Head rail is 1 ½” wide Warranty: Limited lifetime warranty

65

VALANCES VALANCES OVER 72” WIIDE WILL HAVE TO SHIP UPS OVERSIZE CHARGE OR FREIGHT. SOME VALANCES WHEN HINGED CAN SHIP WITHOUT OVERSIZE CHARGE DEPENDING ON MEASURMENTS. AWNING VALANCE – STYLE #DAWNING Awning valance can be made as cornice, rod pocket or medallion mounted. Customer must specify:

1. Face width 3. Short point 2. Long point 4. Return size (shown with scallop bottom option)

CODE AWNING VALANCE DAWNING AWINGING VALANCE WITH SCALLOP BOTTOM DAWNINGSCAL BANNER VALANCE- STYLE #DBANVAL May be rod or board mounted or use tabs for medallions. Can be made in a variety of shapes, will need template for shape. Sides and bottom is pillow cased. Must be lined. Style # DBANVAL Style # DBANVAL2

Customer must specify: 1. Face width 3. Short point 2. Long point 4. Return size

CODE BANNER VALANCE DBANVAL DOUBLE BANNER VALANCE DBANVAL2 YARDAGE REQUIREMENTS FOR 54” FABRIC Width + 3” divided by fabric width = no. of cuts Length + 4”= cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage BORDEAUX VALANCE - STYLE # DBORDEAUX Mounted on board covered with lining. Return has legs to ensure stability. Swag section can be adjusted from 22” to 28” wide. Jabots finish 38” long. Center pelmet is 15” long. Only slight variations in depth can be done. Customer must specify:

1. Face width 3. Short point Style # DBORDEAUX 2. Long point 4. Return size

CODE BORDEAUX VALANCE DBORDEAUX YARDAGE REQUIREMENTS FOR 54” FABRIC Width times 3 divided by fabric width = no. of cuts Length + 6”= cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage

66

BOX-PLEATED VALANCE STYLE # - DBXPLTVAL Mounted on board covered with lining. Straight hem will have an inch of face fabric pulled up in back, shaped bottom will be pillow cased. 11/2” side hems or pillow cased. Flat sections are matched if possible. Pleats are spaced 9” to 12” apart. May have opened or closed box pleats.

Customer must specify: Style # DBOXPLTVAL

1. Face width 3. Short point 2. Long point 4. Return size

CODE BOX-PLEATED VALANCE – UNLINED DBXPLTVALU BOX-PLEATED VALANCE – LINED DBXPLTVALL YARDAGE REQUIREMENTS FOR 54” FABRIC Width times 3 divided by fabric width = no. of cuts Length + 10”= cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage

BRANDYWINE VALANCE – STYLE # DBRANDVAL Mounted on board covered with lining. Minimum return 3 ½”. Must be lined. Bottom and sides are pillow cased, recommend contrast lining or facing the bottom of lining with face fabric. Customer must specify:

1. Face width 3. Short point Style # DBRANDVAL 2. Long point 4. Return size

CODE BRANDYWINE VALANCE DBRANDVAL YARDAGE REQUIREMENTS FOR 54” FABRIC Width + returns times 3 divided by fabric width = no. of cuts Length + 6”= cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage CARLYLE VALANCE – STYLE # DCARLVAL Mounted on board covered with lining. Bottom and sides are pillow cased. Width determines number of scallops and cones. Scallops vary from 12” to 15” in size. Cone is 3” shorter than scallop. Cones and returns need to be self lined or contrast lined. Minimum return size 1 ½”. Customer must specify:

2. Face width 3. Short point Style # DCARLVAL 2. Long point 4. Return size

CODE CARLYLE VALANCE DCARLVAL YARDAGE REQUIREMENTS FOR 54” FABRIC Subtract 5” from board width then divide by number of scallops desired = scallop width Scallop width + 3”= cut width per scallop Scallop length +3” = cut length. Allow for repeat when figuring cut length Cones are 13” wide Cone length + 4” = cut length. Allow for repeat when figuring cut length No. of cuts times cut length (for scallop and cones) divided by 36”= yardage

67

CATHERINE (Pate Meadows pattern) – STYLE # CATH Casual style pole mounted treatment. Each swag section covers 20”, swag width can be altered. Altering width will change the depth from pole to valance top. The jabot face is approximately 2” wide. Jabots are self-lined or contrast lined and swag section has a facing at bottom. Customer must specify:

1. Face width 3. Short point 2. Long point 4. Return size Style# CATH

CODE CATHERINE VALANCE DCATH YARDAGE REQUIREMENTS FOR 54” FABRIC Divide desired width by number of swags desired = swag width Swag width + 10” = cut width per swag Swag length + 20” = cut length Allow for repeat when figuring cut length Jabot = 1 cut per jabot = 2 cuts per treatment Jabot length + 4”= cut length peer jabot Allow for repeat when figuring cut length No. of cuts times cut length (for swags and jabots) divided by 36”= yardage CLAUDINE VALANCE – STYLE # DCLAUDINE Tab valance similar to Carlyle valance. Bottom and sides are pillow cased. Cone is 3” shorter than scallop. Cones need to be self lined or contrast lined. ¾” button on tab. Scallops vary from 18” to 22”. Customer must specify:

1. Face width 3. Short point Style # DCLAUDINE 2. Long point 4. Return size

CODE CLAUDINE VALANCE DCLAUDINE

YARDAGE REQUIREMENTS FOR 54” FABRIC Subtract 5” from board width then divide by number of scallops desired = scallop width Scallop width + 3”= cut width per scallop Scallop length +3” = cut length. Allow for repeat when figuring cut length Cones are 13” wide Cone length + 4” = cut length. Allow for repeat when figuring cut length No. of cuts times cut length (for scallop and cones) divided by 36”= yardage Allow ½ yard per 7 tabs

CONCORD VALANCE (M’FAY) STYLE # CONCORD Mounted on board covered with lining. Must be lined. Bottom and sides are pillow cased, recommend contrast lining or facing the bottom of lining with face fabric. Style # DCONCORD CODE CONCORD VALANCE CONCORD YARDAGE REQUIREMENTS FOR 54” FABRIC Width times 3 divided by fabric width = no. of cuts Length + 10”= cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage 68

DANA VALANCE – STYLE # DANA Mounted on board covered with lining. Pleated tapered valance with sash woven in behind pleats. ¾” button on pleat. Recommend medium weight fabric for face and lightweight for sash. Bottom is pillow cased with facing on back. Recommend 5” difference in short point and long point.

Customer must specify:

1. Face width 3. Short point Style # DANA 2. Long point 4. Return size

CODE DANA VALANCE DANA

YARDAGE REQUIREMENTS FOR 54” FABRIC Face width + returns times 2 ½ divided by fabric width = no. of cuts Length plus + 12” = cut length. Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage FOR SASH No. of cuts from above times 24” divided by 36” = yardage HARMONY VALANCE – STYLE # HARMONY Mounted on board covered with lining. Made in one piece, center is flat and tapered sides are gathered. Bottom and sides are pillow cased. Customer must specify:

1. Face width 3. Short point Style # HARMONY 2. Long point 4. Return size

CODE HARMONY VALANCE HARMONY

YARDAGE REQUIREMENTS FOR 54” FABRIC Face width + returns times 2 ½ divided by fabric width = no. of cuts Length plus + 6” = cut length. Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage HARRISBURG VALANCE (M’Fay) Mounted on board covered with lining. Must be lined. Bottom and sides are pillow cased, recommend contrast lining or facing the bottom of lining with face fabric. Style # HARRIS CODE HARRISBURG VALANCE DHARRIS YARDAGE REQUIREMENTS FOR 54” FABRIC Subtract 5” from board width then divide by number of scallops desired = scallop width Scallop width + 3”= cut width per scallop Scallop length +3” = cut length. Allow for repeat when figuring cut length Cones are 13” wide Cone length + 4” = cut length. Allow for repeat when figuring cut length No. of cuts times cut length (for scallop and cones) divided by 36”= yardage

69

JULIA VALANCE - STYLE # JULIA

Tab valance. Cone/tab sections need to be self lined or contrast lined. ¾” button on tab. Micro-welt on top and bottom edge. Sides and bottom pillow cased. Customer must specify:

3. Face width 3. Return size Style # DJULIA 2. Long point

Note: The return is set in 3” from edge valance will finish 6” wider than window width. CODE JULIA VALANCE DJULIA YARDAGE REQUIREMENTS FOR 54” FABRIC Subtract 6” from face width then divide by number of scallops desired = scallop width Scallop width + 1”= cut width per scallop Scallop length +3” = cut length. Allow for repeat when figuring cut length Cones are 12” wide Cone length + 4” = cut length. Allow for repeat when figuring cut length No. of cuts times cut length (for scallop and cones) divided by 36”= yardage KINGSTON VALANCE- STYLE# DKINGSTON Similar to Windsor valance the Kingston’s pleats are gathered and sewn under cone. We recommend this pattern when using heavy weight fabrics to avoid thickness on top of board. Mounted on board covered with lining. Swags are 15” to 23” wide. Swag drop to 24”. Cascades should not be longer than 30”. Recommend self or contrast lined or you will need to face bottom of lining. Cone is 2” to 3” shorter than swag. Style # DKINGSTON Customer must specify:

1. Face width 3. Length of cascade /return 5. Number of swags 2. Length of swag 4. Return size

CODE KINGSTON VALANCE DKINGSTON YARDAGE REQUIREMENTS FOR 54” FABRIC Face width times 3 divided by width of fabric = no. of cuts Long point + 28” = cut length. Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage LABELLA – STYLE # DLABEL Mounted on board covered with lining. Must be lined. Bottom and sides are pillow cased, recommend contrast lining or facing the bottom of lining with face fabric.

Style # LABEL

70

MORELAND VALANCE – STYLE # DMOREL Flat valance hangs from rings. It is made in two pieces. The valance is pulled up on one side with three pleats and attaches to pole then tapers down into a long pleat on opposite side. The short cascade is made separately and attached to back of pole behind valance. Optional rosette can be placed on top of pleats to give tied appearance. Style # DMOREL Customer must specify:

1. Face width 3. Valance length (10”-30”) 5. Jabot length 2. Return size 4. Long point (can only be twice the length of valance)

CODE MORELAND VALANCE DMOREL YARDAGE REQUIREMENTS FOR 54” FABRIC Valance -Face width + 27” divided by width of fabric = no. of cuts Long point + 6” = cut length Allow for repeat when figuring cut length Jabot – one cut Long point + 6” = cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage NIGHTINGALE – STYLE # DNIGHT This valance can have a smooth bottom edge or dainty scalloped Edge. It has flat sections that can be 12” to 22” wide by 18” deep. The tulip style pleat is placed between the flat sections. Style # NIGHT CODE NIGHTENGALE VALANCE DNIGHT YARDAGE REQUIREMENTS FOR 54” FABRIC Board width divided by number of scallops desired = scallop width Scallop width + 4” = cut width per scallop Scallop length + 3” = cut length. Allow for repeat when figuring cut length Cones are 13” wide Cone length + 4” = cut length. Allow for repeat when figuring cut length Jabot ½ width fabric per side Jabot length + 3” = cut length No. of cuts times cut length (forscallop, cones and jabots) divided by 36” = yardage ROD POCKET CLOUD VALANCE – STYLE # DCLDSHD- R

Recommend 2 ½ times fullness. Finished length includes header size. May be lined or unlined. Please order multiple shades if area is wider than 96” is needed. 1” side hem, 1 ½” bottom hem.

Customer must specify: 1. Width and length 3. Header size 5. Inside or outside mount 2. Rod pocket size 4. Lined or unlined

CODE Style # DCLDSHD-R ROD POCKET CLOUD SHADE OR VALANCE DCLDSHD- R

YARDAGE REQUIREMENTS FOR 54” FABRIC Width times 2 ½ fullness divided by fabric width = no. of cuts Length + 25”+ pocket + header = cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage 71

ROD POCKET SLEEVE – STYLE # DRDPKTSLV Recommend 2 ½ to 3 times fullness. Sleeve must be self-lined. Sleeves are not matched unless otherwise specified. May have header at top and bottom. Customer must specify:

1. Finished width 3. Header size 2. Pocket size Style # DRDPKTSLV

CODE ROD POCKET SLEEVE DRDPKTSLV YARDAGE REQUIREMENTS FOR 54” FABRIC Finished width times fullness divided by width of fabric = no. of cuts Pocket and header length times 2 + 2” = cut length No. of cuts times cut length divided by 36” = yardage

ROD POCKET WINDSOR – STYLE # DWINDRDPKT Gathered on rod. One swag section will cover 15” to 24” of rod space. Recommend self or contrast lined or you will need to face bottom of lining due to horn section flaring out. Swag depth – 16” Horn – 12” Cascade – 18” Style # DWINDRDPKT Customer must specify:

1. Rod width CODE

ROD POCKET WINDSOR DWINDRDPKT YARDAGE REQUIREMENTS FOR 54” FABRIC Face width times 3 divided by width of fabric = no. of cuts Long point + 28” = cut length. Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage ROLLED STAGE COACH – STYLE# DRSTAGE Mounted on board covered with lining. Bottom and sides are pillow cased. 1 3/8” wood pole in bottom. Two 2” wide ties are standard. Optional knotted ties. Customer must specify:

1. Finished width 2. Finished length 3. Return size Style # DRSTAGE

CODE ROLLED STAGE COACH DRSTAGE YARDAGE REQUIREMENTS FOR 54” FABRIC Finished width + 3” divided by fabric width= no. of cuts Finished length times 2 + 10”= cut length Allow for repeat when figuring cut length If using contrast roll Finished length +10” for face fabric = cut length times no. of cuts divided by 36”= yardage 36” cuts for contrast roll times no. of cuts divided by 36” = yardage Ties are figured 2 times the length +10” divided by 36”= yardage

72

SHAWL VALANCE – STYLE # DSHAWL Fabric should be railroaded. Valance is made in long rectangle and draped across board covered with lining. The tail of valance finishes about 28” long. Valance length is 14” to 18”. Customer must specify:

1. Face width 2. Return size Style # DSHAWL

CODE SHAWL VALANCE DSHAWL YARDAGE REQUIREMENTS FOR 54” FABRIC (Railroad) Face width + 60” = yardage (Not railroaded) Face width + 60” divided by fabric width= no.of cuts Finished length + width of return + 5” = cut length Allow for repeat when figuring cut length Cut length times no. of cuts needed = yardage SKIP PLEATED VALANCE – STYLE # DVALSKP May be mounted on board or pinned to hang on rod. Recommend 2 ½ fullness. If straight, valance will have 1 ½” side hems and 2” bottom hem, blind-stitched . If shaped, valance sides and bottom are pillow cased. 4” crinoline in top. French pleat is standard. May be unlined or lined. Customer must specify: Style # DVALSKP

1. Face width 4. Return size 2. Finished length 5. Board mounted or on rod 3. Distance between pleats 6. Short point and long point if shaped

CODE

SKIP PLEATED VALANCE DVALSKP YARDAGE REQUIREMENTS FOR 54" FABRIC Face width + returns times fullness divided by fabric width = no. of cuts Add 14" to finished length = cut length. Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36" = yardage SOFT VALANCE - STYLE # DSFTVAL Mounted on board covered with lining. May be shaped or straight. Shaped bottom charged as scallop. Template required for all shaped styles. Returns should have legs to ensure stability. May be quilted. Cannot have sharp points in turns. Customer must specify:

1. Face width 3. Return size Style # DSFTVAL 2. Finished length 4. Short point and long point if shaped

CODE

SOFT VALANCE DSFTVAL SOFT VALANCE WITH KICK PLEATS DSFTVALKP YARDAGE REQUIREMENTS FOR 54" FABRIC Face width + returns + 3” divided by width of fabric = no.of cuts Length +5” = cut length Allow for repeat when figuring cut length Cut length times no. of cuts = yardage If quilted add 10% to width and cut length for shrinkage

73

STAGE COACH VALANCE- STYLE# DSTAGE

Mounted on board covered with lining. Bottom and sides are pillow cased. Must be lined. Number of folds depends on finished length. Folds are approximately 4” to 6” long. When optional ties are ordered the standard is two 2” ties. Customer must specify:

1. Face width 3. Return size Style # DSTAGE 2. Finished length 4. With or without ties

CODE STAGE COACH VALANCE DSTAGE YARDAGE REQUIREMENTS FOR 54" FABRIC Face width + returns + 3” divided by width of fabric = no.of cuts Length times 3+10 = cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage Ties are figured 2 times the length +10” divided by 36”= yardage TAPERED VALANCE – STYLE # DTPRVAL May be mounted on board or rod. May be lined or unlined. 2 ½ times fullness unless otherwise specified. May be smocked or pleated. One scallop in center of treatment is standard. Style # DTPRVAL Customer must specify:

1. Face width 3. Long point 5. Middle point 2. Return size 4. Short point 6. Pocket and header size (if required)

CODE

TAPERED VALANCE – UNLINED DTPRVALU TAPERED VALANCE – LINED DTPRVALL YARDAGE REQUIREMENTS FOR 54" FABRIC Face width + returns times fullness divided by width of fabric = no. of cuts (If board mounted) Long point + 6” = cut length Allow for repeat when figuring cut length (If rod mounted) Long point + header and pocket twice + 2”= cut length Allow for repeat when figuring cut length Cut length times no. of cuts divided by 36” = yardage VICTORY VALANCE – STYLE # VICTORY A casual swag valance mounted on decorative pole. Fabric should be railroaded to prevent seams. Need to be self lined or contrast lined. Suggest using a solid or fabric with non-directional repeat. Suggest using 1 3/8” pole or smaller. Swag width is 14” to 26” Swag depth – 14” to 18” Cascade – 27” to 34” Style # VICTORY CODE VICTORY VALANCE – railroad fabric DVICTORY VICTORY VALANCE – cut and seam fabric DVICTORY YARDAGE REQUIREMENTS FOR 54" FABRIC To figure number of swags, subtract 3” from face width, then divide by desired swag width (14” to 26”) 1 swag, 2 cascades and 2 cones = 3 yards fabric For each additional swag add 1 ½ yards. (If railroaded) 1 swag, 2 cascades and 2cones = 6 yards (this is enough for face and lining)

74

WINDSOR VALANCE – STYLE # DWINDSRVAL Windsor valance has swag sections pulled up to top of board . We do not recommend using heavy weight fabrics with this treatment. To avoid thickness on top of board use the Kingston valance. Mounted on board covered with lining. Swags are 15” to 23” wide. Swag drop to 24”. Cascades should not be longer than 30”. Recommend self or contrast lined or you will need to face bottom of lining. Cone is 2” to 3” shorter than swag. Style # DWINDSRVAL Customer must specify:

3. Face width 3. Length of cascade /return 5. Number of swags 4. Length of swag 4. Return size

CODE WINDSOR VALANCE DWINDSRVAL YARDAGE REQUIREMENTS FOR 54” FABRIC Face width times 3 divided by width of fabric = no. of cuts Long point + 28” = cut length. Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage

75

OPTIONS AVAILABLE CODE PRICE Banding, bias cut DBBND Banding, cut and press (topstitched) DBND Banding, mitered DBNDM Banding, shirred or pleated DBNDSHR Banding, wrapped DBW Buttons DBUT Fabric, Sheets (no guarantee) DSHEET Hem, Hand sewn DHNDHEM Hinge board (valances only) DHINGE Interline valance (labor only) DVALI Knots DKNOT Making pattern DMP Rosette DROSETTES Ruffle, gathered DRFL Ruffle, pleated DRFLPLT Scallop – bottom DSCALLOP Tassel, sewn on tassel DSOT Trim/cording DCDTRIM Trim, beaded DCDTRIMB Velcro DVEL Special Cutting or matching may be subject to extra charge up to 35% DSPEC (Virginia Quilting to confirm before processing order)

(a) Matching top down (b) Cutting crushed or pleated fabric (c) Cutting, matching certain patterns, or pattern placement (d) Working with scraps

Additional option for Box Pleated Valance Contrast pleat DSHCONPLT Additional option for Rod pocket Windsor Cascades over 18” long DWCSCD Additional option for Rolled Stage Coach Contrast roll DCROLL Additional option for Skip Pleated Valance Pinning DPNG Additional option for Soft Valance DSFTVALQ Quilting Additional option for Tapered Valance Additional scallops (scallops over 1) DXSCALP Gathered on board DGB Long point over 36” DSPEC350 Pinch pleat DVALPP Smocked top DTSMOCK 4” Broken Pencil Pleat ST002

4” Pencil Pleat ST001 1” Pencil Pleat ST005 4” Diamond Pleat ST004 4” Up – Down Pleat ST003 4” Shirring Tape ST006 2” Shirring Tape ST007

76

CORNICES AND LAMBREQUINS

77

CORNICES AND LAMBREQUINS CORNICES- STYLE# DCORN Cornices have a padded face, corded perimeter. May substitute prefab trim with lip cord for corded perimeter. Upholstered wood cornices are padded with polyester fiberfill. Constructed with heavy weight ¾” dust board on a ¾” thick frame. Return is measured inside cornice frame. Please allow for rod or shade clearance if mounted under cornice. Cornices up to 56” can be shipped UPS; over 56” are shipped common carrier. Customer must specify:

1. Face width 2. Return size 3. Long point 4. Short point

CODE PRICE STRAIGHT CORNICE DCORNST SHAPED CORNICE DCORNSH (Customers own design needs to be scaled) LAMBREQUIN ( By perimeter) DLAM OPTIONS AVAILABLE (add to base price) Banding, cut and press DCBND Buttons DBUT Cornice quilted CORNQ Cornice shirred CORNSHR Cornice depth 22”- 26” CORNOVR22 Cornice depth over 26” is priced as a lambrequin Tassel, attached to cornice DSOT375 Hinge on cornice (piano hinge) DHINGECORN Miter cornice DMITERCORN Nailheads 5004DN YARDAGE REQUIREMENTS FOR 54” FABRIC Cornices Face width + return (4 times) + 2” divided by fabric width = no. of cuts Long point +12”= cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage Lamrequins Face width + return (4 times) + 2” divided by fabric width = no. of cuts Length of body + 12” = cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage

Width of legs + return (4times) + 2” divided by fabric width = no. of cuts Length of legs + 12” = cut length Allow for repeat when figuring cut length No. of cuts times cut length divided by 36” = yardage Add yardage for body and legs together.

78

DRAPERY LININGS

54” wide Linings Premium 100% Cotton Sateen White 100% cotton 100% Cotton Sateen Ivory 50/50 Poly- Cotton Sateen White 50/50 poly-cotton 50/50 Poly- Cotton Sateen Ivory Deluxe 100% Cotton White 100% cotton 100% Cotton Ivory

Budget Linit White 70/30 poly-cotton Linit Ivory

Interlinings

Heavy Interlining White 100% cotton Heavy Interlining Natural

Bump White 100% cotton Bump Natural

Lining/Interlinings Combination

Classic Napped White 54” 100% cotton Classic Napped Ivory 54”

Sateen Fleece Ivory 54”

Outblack Fleece Ivory 54” Thermal lining

Thermalsuede White 50/50 poly-cotton Blackout Linings

Outblack Blackout White 100% cotton Outblack Blackout Ivory

Flame retardant linings

Flametrol (FR Blackout) White 70/30 poly-cotton Flametrol (FR Blackout) Ivory

Roclon FRWhite 54” 100% cotton Roclon FR Ivory 54”

79

SHEER (118”) CODE HANES Voile or Batiste SHEER Colors Available White Ivory Winter White Marble

80