Beckhoff Water Treatment 2008

Water Treatment Solutions

New Automation Technology BECKHOFF

2

Beckhoff can realise open automation systems on the basis of PC-based control technology for almost all indus-try sectors. With innovative automation solutions Beckhoff sets new standards for the automation of water and waste water treatment and transport systems.In addition to the I/O components for recording all data points and the TwinCAT automation software, the product range comprises an integrated, scalable, modular control system that offers the right solution for any task in terms of computing capacity, complexity and cost: from high-performance Industrial PC as main computer for con-trolling sewage works to small local controllers for “intelligent exter-nal stations” that pick up and process signals directly on site.

The Beckhoff range comprises the following controller categories:– Industrial PCs – high-end controllers for large and complex

applications– Embedded PCs – robust DIN rail PCs for the medium control level – Bus Terminal Controllers – small controllers with fi eldbus

interface and connection to the modular Bus Terminal system

The special challenge in water engineering applications is dealing with the complex requirements in terms of adaptation to different communication routes, controllers and devices. In most cases, sys-tems consist of an inhomogeneous conglomeration of devices for solving special problems that have been assembled over the years.

In addition, the system will usually have been adapted to vari-ous software packages such as local visualisation, local data loggers or central control and operation management systems.

Beckhoff | Intelligent automation of water and waste water treat

Continuity through PC-based technology In response to the wide range of requirements from different industries, Beckhoff has adopted a standardised approach in the form of PC-based controllers. This led to the development of a uni-form, fully scalable and, most importantly, open system. This open-ness, both in terms of the software and the hardware interfaces, helps operators to adapt their systems to diverse and changing requirements without repeatedly incurring high implementation costs and effort.

The Windows operating system is the basis for this fl exibility. Due to its scalability, Windows can now be used on almost any hardware platform, from large servers in control rooms to small external stations located at storm water basins. The TwinCAT automation software from Beckhoff controls the overall treatment plant and local stations. The system is programmed according to the international IEC 61131-3 standard.

Depending on the requirements in terms of automation com-ponents, in addition to TwinCAT, Windows enables further software components to be installed on the same hardware as required. The result is a uniform platform that facilitates communication between the individual components.

Safety through standardsReliability of the automation devices and guarantee of maximum availability of process signals and reachability of external structures are crucial. These requirements are met through:– PC-based control: communication options via standard

communication routes (ISDN, analog, GSM, dedicated line, etc.)

New Automation Technology We reserve the right to make technical changes.BECKHOFF

Beckhoff | New Automation TechnologyBeckhoff implements open automation systems based on PC Control technology. The product range covers Industrial PCs, I/O and Fieldbus Components, Drive Technology and automation software. Products that can be used as separate components or integrated into a complete and seamless control system are avail-able for all industries. The Beckhoff “New Automation Technology” philosophy represents universal and open control and automation solutions that are used worldwide in a wide variety of different applications, ranging from CNC-controlled machine tools to intel-ligent building automation.

Innovative products and a full range of servicesSince the foundation of the company in 1980, continuous devel-opment of innovative products and solutions using PC-based control technology has been the basis for the continued success of Beckhoff. Many automation technology standards that are taken for granted today were conceptualised by Beckhoff at an early stage and successfully introduced to the market:– 1982: P1000 – single-board motion controller– 1986: PC Control – fi rst PC-based machine controller– 1989: Lightbus – high-speed fi eldbus utilising optical fi bre– 1990: All-in-one PC motherboard– 1995: Bus Terminal – fi eldbus technology in terminal block

format– 1996: TwinCAT – real-time software package under

Windows with PLC and Motion Control functions– 1998: Control Panel – remote IPC Control Panels– 2002: CX1000 – modular Embedded PCs for DIN rail

mounting– 2003: EtherCAT – real-time Ethernet fi eldbus system– 2005: TwinSAFE – safety solution for the Bus Terminal system– 2005: AX5000 – EtherCAT Servo Drive– 2006: XFC – eXtreme Fast Control Technology– 2007: Industrial Motherboards – Made in Germany

The Beckhoff PC Control philosophy and the invention of the Lightbus system, the Bus Terminals and TwinCAT automation software represent milestones in automation technology and have become accepted as high-performance alternatives to traditional control technology. EtherCAT, the real-time Ethernet solution, makes forward-looking, high-performance technology available for a new generation of leading edge control concepts.

World-wide presence on all continentsThe central divisions of Beckhoff, such as development, produc-tion, administration, distribution, marketing, support and service are located at the Beckhoff Automation GmbH headquarters in Verl, Germany. Rapidly growing presence in the international market is taking place through subsidiaries in Austria, Belgium, Denmark, Finland, France, Italy, Poland, Russia, Slovenia, Spain, Sweden, Switzerland, Turkey, as well as in Australia, Brazil, Canada, China, India, South Africa, the United Arab Emirates and the USA. Through worldwide co-operation with partners, Beckhoff is represented in more than 60 countries.

3

ment systems

– standard software interfaces (OPC, IEC 60870-5-101/-102/-103/-104, Modbus)

– use of standard fi eldbus systems (e.g. Ethernet, PROFIBUS, DeviceNet etc.)

– Beckhoff Bus Terminals for logging a wide range of I/O signals with a granularity between 1 and 64 channels

The Beckhoff Bus Terminal system for interfacing of data points not only supports all common sensors and actuators, but also integrates all main fi eldbus systems via corresponding Bus Coupler types. The Bus Terminals enable bit-precise confi guration of the required I/O channels. With over 300 different Bus Terminals, Beckhoff offers the right tech-nology for all data points and for all signal types. The Bus Terminals make retrofi tting of functionalities signifi cantly simpler and faster.

This fl yer provides a compact overview of products and solutions for the water treatment sector. The main catalog “New Automation Technology” and the web pages at www.beckhoff.com offer detailed descriptions and technical data for the individual product groups and information about associated accessories.

Beckhoff | New Automation TechnologyBeckhoff implements open automation systems based on PC Control technology. The product range covers Industrial PCs, I/O and Fieldbus Components, Drive Technology and automation software. Products that can be used as separate components or integrated into a complete and seamless control system are avail-able for all industries. The Beckhoff “New Automation Technology” philosophy represents universal and open control and automation solutions that are used worldwide in a wide variety of different applications, ranging from CNC-controlled machine tools to intel-ligent building automation.

Innovative products and a full range of servicesSince the foundation of the company in 1980, continuous devel-opment of innovative products and solutions using PC-based control technology has been the basis for the continued success of Beckhoff. Many automation technology standards that are taken for granted today were conceptualised by Beckhoff at an early stage and successfully introduced to the market:– 1982: P1000 – single-board motion controller– 1986: PC Control – fi rst PC-based machine controller– 1989: Lightbus – high-speed fi eldbus utilising optical fi bre– 1990: All-in-one PC motherboard– 1995: Bus Terminal – fi eldbus technology in terminal block

format– 1996: TwinCAT – real-time software package under

Windows with PLC and Motion Control functions– 1998: Control Panel – remote IPC Control Panels– 2002: CX1000 – modular Embedded PCs for DIN rail

mounting– 2003: EtherCAT – real-time Ethernet fi eldbus system– 2005: TwinSAFE – safety solution for the Bus Terminal system– 2005: AX5000 – EtherCAT Servo Drive– 2006: XFC – eXtreme Fast Control Technology– 2007: Industrial Motherboards – Made in Germany

The Beckhoff PC Control philosophy and the invention of the Lightbus system, the Bus Terminals and TwinCAT automation software represent milestones in automation technology and have become accepted as high-performance alternatives to traditional control technology. EtherCAT, the real-time Ethernet solution, makes forward-looking, high-performance technology available for a new generation of leading edge control concepts.

World-wide presence on all continentsThe central divisions of Beckhoff, such as development, produc-tion, administration, distribution, marketing, support and service are located at the Beckhoff Automation GmbH headquarters in Verl, Germany. Rapidly growing presence in the international market is taking place through subsidiaries in Austria, Belgium, Denmark, Finland, France, Italy, Poland, Russia, Slovenia, Spain, Sweden, Switzerland, Turkey, as well as in Australia, Brazil, Canada, China, India, South Africa, the United Arab Emirates and the USA. Through worldwide co-operation with partners, Beckhoff is represented in more than 60 countries.

New Automation TechnologyBECKHOFFWe reserve the right to make technical changes.

Beckhoff | The IPC Company

Beckhoff | The I/O Company

4

Beckhoff | New Automation Technology

The Bus Terminal is the open and fl exible I/O system for all common fi eldbuses. The wide choice of electronic block terminals covers the full range of input and output channels required in automation – from the digital and analog world right through to the serial interface. It is possible to tailor a specifi c solution, as if from a toolkit.

Industrial PCPC Control for all applications

Bus TerminalThe modular fi eldbus system for automation

Embedded PCModular DIN rail IPCs and Industrial Motherboards

Industrial PCs in different designs and with a range of optional fea-tures offer the right solution for any application. PCs with industrial design are equipped with high-performance components, based on open standards. A wide range of products and individual housing designs enables optimum adaptation to the specifi c control require-ments.

The Embedded PCs of the CX series are designed for control tasks in the medium performance range. The compact Industrial PC can be mounted on a DIN rail, is modular and can be assembled depending on the required tasks. For optimum scaling the CX family offers several basic CPU modules that can optionally be extended with all main PC and fi eldbus interfaces and I/O modules.


Beckhoff | The Automation Company

5

Beckhoff is represented in over 60 countries around the world and offers comprehensive support and service, with fast and competent assistance guaranteed. The support department will not only advise you about technical questions, but also in the planning, programming and com-missioning of complex automation projects. The comprehensive training options for Beckhoff system components are an important part of this support.

TwinCATPLC and Motion Control on the PC

Worldwide Support, Service, Training, Engineering

The compact, robust Fieldbus Box modules function as decentralised I/Os right at the machine or plant. Their strong, sealed con struction offers protection class IP 67: ideal for application in wet, dirty or dusty environ ments. The Fieldbus Box fi ts in with all common fi eldbus systems and offers plug-and-play function ality in the fi eld.

Fieldbus BoxThe compact IP 67 modules

EtherCAT is the real-time Ethernet system for industrial automa-tion, offering fl exible topology and simple handling, among other benefi ts. The high-performance system enables control concepts that could not be realised with classic systems. No special plug-in cards are required in addition to the standard Ethernet port.

EtherCATUltra high-speed communication

The TwinCAT automation software integrates real-time control with PLC system, NC axis control and programming environment in a single package. The software PLC/NC/CNC is embedded in the Microsoft operating systems Windows NT/2000/XP/Vista, NT/XP Embedded and Windows CE. Programming is based on the IEC 61131-3 standards. TwinCAT links to all common fi eldbuses and PC interfaces for I/O signals.


DigitalInput

DisplayDigitalOutput

Sewage plant

External structures/substations

Well Pump stations

Control room,laboratory

PLS server

Industrial PC

Embedded PC CX

Embedded PC CX

Ethernet, PROFIBUS, Interbus, DeviceNet, ControlNet, Modbus, Fipio, CC-Link, RS232/RS422/RS485, USB

PROFIBUS, Ethernet, Interbus, DeviceNet, ControlNet, Modbus, Fipio, CC-Link, RS232/RS422/RS485, USB

I/O level

Ethernet

Grid/sand catcher/mechanical purifi cation

Primary clarifi cation

6

Beckhoff | Open automation solutions for the water treatment se

Ethernet, modem, ISDN, GSM/GPRS,dedicated line,radio connection

Network

Audio

Camera

Video

SMS messages

Standard interfacesfor remote access,ISDN, modem, etc.

Visualisation

New Automation TechnologyBECKHOFF

P QO2N2pH

pHmeasure-ment

T

Loggingof energydata

Modem Radioconnec-tion

Thresh-olds

Temper-ature

Pressure Level Oxygen Volumerate offlow

FaultNitrogen

Storm water basins Water tower

Bus Terminal Controller BX

Bus Terminal Controller BC

Bus Coupler BK

Bus Terminal Controller BX

Bus Terminal Controller BC

Bus Coupler BK

Biology Sludge treatment Final clarifi cation

7

ctor

➔ IPC

➔ CX

➔ BX

➔ BC

Beckhoff | Scalable control technology

Beckhoff offers a scalable, modular control system that provides suitable solutions for any task in terms of computing capacity, complexity and costs. All Beckhoff controllers, irrespective of their performance class, are programmed in IEC 61131-3 via the TwinCAT automation software.

8


Software PLC and programming environmentThe TwinCAT software system converts any compatible PC into a real-time controller featuring multiple PLCs, a programming environment and an operating station. TwinCAT runs under Windows NT/2000/XP/Vista, NT/XP Embedded or Windows CE. PC Control enables connection to all common fi eldbuses and PC interfaces, as well as data interfacing via open standards such as OPC. TwinCAT PLC is an IEC 61131-3 PLC with four run-time systems for each PC and short cycle times from 50 µs. Engineering tools support the creation and maintenance of software.

PC ControlThe Beckhoff Industrial PCs represent the most powerful hardware platform for PC-based control technology. Beckhoff supplies Industrial PCs constructed in a variety of forms and equipped in various ways. The PCs feature industrial design and are equipped with top-perform-ance components. They are based on open IT and automation stand-ards. Individual housing constructions ensure optimised adaptation to the control requirements.

Embedded ControlThe Bus Terminal Controller series BC and BX are small controllers for the Beckhoff Bus Terminal system. The modular I/O system consists of electronic terminal blocks for direct sensor/actuator wiring and a Bus Coupler for connection to the bus system. Tailor-made solutions can be confi g-ured from a wide range of signal options. As intelligent Bus Couplers, the Bus Terminal Control-lers are available for all common fi eldbus systems. They can be used as independent controllers or as intelligent fi eldbus slaves.

Embedded PC ControlThe Embedded PCs of the CX series are optimised for control tasks in the medium performance range. The modular, small-format Industrial PCs are DIN rail mountable and can be confi guredaccording to the task in hand. The CX controllers with compact design combine PLC, I/O inter-face and visualisation. The CPU modules with different processors operate without fan or rotat-ing storage media. Optionally, all main PC and fi eldbus interfaces and I/O components are ex-pandable.

9


The head stationof the Bus Terminals:from Bus Couplerwith fieldbus interfaceto Embedded PC

The terminal moduleswith plug-in wiringcombine 16, 32 or64 digital I/Os withina very small spaceand with highpacking density.

Bus Terminals in1-, 2-, 4- and 8-channel modularity,no restriction onmixing of signaltypes

Embedded PC series CX for PLCand Motion Control applications

Bus Terminal Controller series BX with integratedIEC 61131-3 PLC and extended interfaces

Bus Terminal Controller series BCwith integrated IEC 61131-3 PLC

Bus Coupler series BK, the linkbetween Bus Terminals and fieldbus

Potential feedterminals enableconfigurationof differentpotential groups.

Free mix of signals:More than 300 differentBus Terminals forconnection to allcommon sensors andactuators

10

Digital outputChannels 1 2 4 8 16 32 645 V DC x24 V DC x x x x x x120 V AC/DC x230 V AC x x x400 V AC xPWM xPulse train xAC motor xDimmer xStepper motor xSafety xRelay xDiagnostic x

Digital inputChannels 2 4 8 16 32 645 V DC x24 V DC x x x x x x48 V DC x60 V DC x120 V AC/DC x230 V AC xThermistor xNAMUR xCounter xSafety xSimulator x

Bus Coupler/ControllerFieldbus BK BC BX CXEthernet TCP/IP x x x xEtherCAT x xPROFIBUS x x x xPROFINET x xEtherNet/IP x xCANopen, DeviceNet x x x xLightbus x x xInterbus x xRS232/RS485 x x x xModbus x x xSERCOS, USB x xControlNet xFipio, CC-Link x

Beckhoff | Bus Terminals – The complete automation kit


Bus end terminal

Communicationterminals enablethe integration ofsubsystems suchas AS-Interface,RS232 and RS485.

The power terminal transforms a standardcontactor into a motor protection relay withcomprehensive diagnostic functions.

3-phase powermeasurement capabilityenables all relevantelectrical data of thesupply network to bemeasured.

Integrated safety:The TwinSAFE BusTerminals enablethe connection of allcommon safety sensorsand actuators.

The terminal bus extensionenables the connection ofup to 255 Bus Terminals(instead of 64) toa single station.

Bus Terminals witha maximum measure-ment error of ±0.01%expand the range ofapplications to high-precision measure-ment technology.

11

Position measurement,communicationRS232 xRS422/RS485 xAS-Interface xEIB xLON xDALI/DSI xMP-Bus xM-Bus xEnOcean xDMX xSafety logic xSSI encoder xIncremental encoder x

Analog outputChannels 1 2 4 80 … 10 V x x x x±10 V x x x x0 … 20 mA x x x x4 … 20 mA x x x x

Analog inputChannels 1 2 4 80 … 10 V x x x x±10 V x x x x0 … 20 mA x x x x4 … 20 mA x x x x0 … 2 V x ±2 V x Thermocouples x x x xResistance x x xthermometerResistor bridge xOscilloscope x xPower xmeasurement


12

Beckhoff | System overview

EtherCAT

Ethernet

TwinCAT

Industrial PC

DriveTechnology

Embedded PC

PC Fieldbus Cards

Bus Terminal

Fieldbus Box

EtherCAT

Lightbus

Digital Compact Servo DriveAX20xx

Synchronous ServomotorsAM2xxx, AM3xxx

Digital Compact Servo DriveAX25xx

Digital Compact Servo DriveAX5xxx

Bus Coupler BK1120 (K-bus inter face), Bus Terminals KL / KSxxxx

PCI Ethernet FC90xx

Coupler Box IL230x-B110

ExtensionBox IExxxx

Coupler EK1xxx, EtherCAT Terminals EL/ESxxxx

Compact Box IPxxxx-B31x

Coupler Box IL230x-B31x

ExtensionBox IExxxx

PLC Box IL230x-C31x(IEC 61131-3)

Bus Coupler BK3xx0,Bus Terminals KL / KSxxxx

PCI PROFIBUS FC310x

Bus Terminal Controller BC / BX31x0 (IEC 61131-3)

Embedded PC CX1010, Bus Terminals or EtherCAT Terminals

Embedded PC CX1020/CX1030Bus Terminals or EtherCAT Terminals

Panel PCC33xx

Panel PC C36xx

Panel PC CP71xx

Panel PC CP65xx

Panel PC CP64xx

Panel PC CP72xx

Panel PC CP63xx

Panel PC CP62xx

TwinCAT NC PTP: PTP axis positioning software

TwinCAT PLC: IEC 61131-3 multi-PLC

TwinCAT NC I: 3-D axis interpolation software

Aut

omat

ion

I/O

Mot

ion

IPC


13

DALI

Ethernet TCP/IP

Fipio

Bus Coupler BK2xx0, Bus Terminal Controller BC2000 (IEC 61131-3)

EIBLON

CP-Link DVI/USBEthernet CP-Link DVI/USBEthernet

Linear ServomotorsAL2xxx, AL3xxx

Stepper MotorsAS1xxx

Compact Box IPxxxx-B5x0

Coupler Box IL230x-B5xx

ExtensionBox IExxxx

Compact Box IPxxxx-B5x 8

Bus Coupler BK5xx0,Bus Terminals KL / KSxxxx

Bus Terminal Controller BC/BX5xx0 (IEC 61131-3)

PCI CANopen FC510x PCI DeviceNet FC520x

Bus Coupler BK9xx0, Bus Terminal Controller BC/BX9xx0 (IEC 61131-3)

Coupler Box IL230x-B90x, PLC Box IL230x-C900 (IEC 61131-3)

EthernetSwitch CU20xx PCI Ethernet FC90xx

Compact Box IPxxxx-B200

Lightbus module Mxxxx

Coupler Box IL230x-B200

ExtensionBox IExxxx

PCI Lightbus FC200x ISA Lightbus C1220

Embedded PC CX9000, CX9010Bus Terminals DALI EIB

LON

K-bus extension

19-inch built-in IPC C51xx

Control cabinet PC C62xx



Built-in Control Panel CP66xx/CP67xx

Built-in Control Panel CP68xx/CP69xx

Control Panel CP70xx

Control Panel CP77xx

Control Panel CP78xx/CP79xx


Built-in Control Panel CP60xx

TwinCAT CNC: CNC path control software

TwinCAT I/O: I/O software interface

TwinCAT CP: Control Panel driver

TwinCAT OPC: Visualisation interface

MP-Bus

Industrial MotherboardsCBxxxx

Embedded PC CX9000, CX9010EtherCAT Terminals


Beckhoff | Information media

Ordering information Description

DK1101 Main catalog, German

DK1102 Main catalog, English

DK1301 News catalog, German

DK1302 News catalog, English

DK1401 Product overview, German

DK1402 Product overview, English

DK1405 Product overview, French

DK1406 Product overview, Italian

DK1407 Product overview, Russian

DK4000 Main catalog and software products on DVD, German, English, Italian

DK6001 Company magazine PC Control, German

DK6002 Company magazine PC Control, English14

Main catalog Product overview News catalog PC Control magazine Product DVD

Order no. DK110x Order no. DK140x Order no. DK130x Order no. DK600x Order no. DK4000


www.beckhoff.comThe Beckhoff internet presence offers comprehensive product and system information, technical data and documentation – basically everything that is worth knowing on more than 3,000 web pages. The complete online presence is available in German at www.beckhoff.de and in English at www.beckhoff.com. The clear structure of the online offer simplifi es the location of products and solutions. A clear tree structure and hyperlinks on each page facilitate navigation. A convenient search function permits rapid access to the desired product information. Concrete examples of the practical use of Beckhoff components and system solutions are documented by application reports from widely differing branches of industry.

Online documentation In addition to all the information contained in the printed catalog, the online service offers additional information, available in the universal PDF or in CHM (Compiled HTML) fi le format: detailed documentation and manuals for the Beckhoff products and software updates, technical drawings and confi guration fi les for the fi eldbus components. The full version of the powerful TwinCAT automation software can be downloaded and tested free of charge for 30 days.

Beckhoff®, TwinCAT®, EtherCAT®, Safety over EtherCAT™, TwinSAFE™ and XFC™ are registered trademarks of Beckhoff. Other designations used in this publica-

tion may be trademarks whose use by third parties for their own purposes could violate the rights of the owners. © Beckhoff Automation 2008, subject to change

without prior notice.

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always

apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist

if expressively agreed in the terms of contract. 15

Internet

www.beckhoff.com


DK3

532-

0408India

Beckhoff Automation Pvt. Ltd. Suite 4, Level 6, Muttha Towers Don Bosco Marg Pune – 411 006 India Phone: + 91 20 / 40 00 48 00 Fax: + 91 20 / 40 00 49 99 [email protected] www.beckhoff.co.in

Inteltek Automation Pvt. Ltd.Sr.no.100/5, AmbegaonPune – 411 046MaharashtraIndiaPhone: + 91 20 / 24 31 81 21Fax: + 91 20 / 24 31 81 [email protected]

JapanK.MECS Co., Ltd.Yusen Iwamotocho Blg. 3F2-3-3 Iwamotocho, Chiyoda-City,Tokyo 101-0032JapanPhone: + 81 3 5825 5333Fax: + 81 3 5825 [email protected]

Singapore, Malaysia, Philippines, Vietnam, IndonesiaTDS Technology (S) Pte Ltd. 64 Sungei Kadut Loop(Hocen Building)Singapore 729493SingaporePhone: + 65 / 63 66 16 61 Fax: + 65 / 63 62 16 61 [email protected]

Thailand TDS Technology (Thailand) Co Ltd50/962 Moo 2Bengyeetos ThanyaburiPratumthanee12130 BangkokThailandPhone: + 66 (0) 2569 5511Fax: + 66 (0) 2569 [email protected]

T & R Electronic (Thailand) Co., Ltd.120/62 Moo 8 Bang Sare Sattahip Chonburi 20250 ThailandPhone: + 66 (0) 3873 7487Fax: + 66 (0) 3873 7171 [email protected]

South KoreaTri-TEK Corp.717 DaeRyung TechnoTown III 448 KasanDong KumcheonguSeoul 153-803KoreaPhone: + 82 2 / 2107-32 42Fax: + 82 2 / 2107-39 [email protected]

TaiwanJI-DIEN Co., Ltd.9F., No. 22, Sec. 1, Zhongshan Rd.Xingzhuang CityTaipei County 242Taiwan (R.O.C.) Phone: + 886 (2) 8522 3237 Fax: + 886 (2) 8522 3168 [email protected]

United Arab Emirates Beckhoff Automation FZEC# 608, Dubai Silicon OasisP.O. Box No. 341007DubaiUnited Arab EmiratesPhone: + 971 4 5015480 Fax: + 971 4 5015481 [email protected]

AustraliaAustraliaBeckhoff Automation Pty. Ltd.Level 16, 10 Queens RoadMelbourne, Victoria, 3004AustraliaPhone: + 61 (3) 99 12 54 30Fax: + 61 (3) 83 20 47 [email protected]

New ZealandW. Arthur FisherP.O. Box 12747PenroseAuckland New ZealandPhone: + 64 9 / 2 70 01 00Fax: + 64 9 / 2 70 09 [email protected]

www.beckhoff.com

Headquarters

Beckhoff Automation GmbHEiserstraße 533415 VerlGermanyPhone: + 49 (0) 52 46 / 9 63 - 0Fax: + 49 (0) 52 46 / 9 63 - 1 [email protected]

EuropeGermanyOffi ce BalingenBeckhoff Automation GmbHKarlstraße 1972336 BalingenGermanyPhone: + 49 (0) 74 33 / 2 60 24 - 0Fax: + 49 (0) 74 33 / 2 60 24 - [email protected]

Offi ce BerlinBeckhoff Automation GmbHFasanenstraße 8110623 BerlinGermanyPhone: + 49 (0) 30 / 88 71 16 - 0Fax: + 49 (0) 30 / 88 71 16 - [email protected]

Offi ce FrankfurtBeckhoff Automation GmbHTorhaus WesthafenSpeicherstraße 5960327 Frankfurt am MainGermanyPhone: + 49 (0) 69 / 68 09 88 - 0 Fax: + 49 (0) 69 / 68 09 88 - [email protected]

Offi ce HanoverBeckhoff Automation GmbHWürzburger Straße 1330880 LaatzenGermanyPhone: + 49 (0) 5 11 / 87 57 58 - 0Fax: + 49 (0) 5 11 / 87 57 58 - [email protected]

Offi ce Lübeck Beckhoff Automation GmbHWahmstraße 56 23552 LübeckGermany Phone: + 49 (0) 4 51/ 20 39 88 - 0 Fax: + 49 (0) 4 51/ 20 39 88 - 20 [email protected]

Offi ce MunichBeckhoff Automation GmbHIndustriestraße 3182194 Gröbenzell/MunichGermanyPhone: + 49 (0) 81 42 / 4 10 59 - 0Fax: + 49 (0) 81 42 / 4 10 59 - [email protected]

Offi ce NurembergBeckhoff Automation GmbHOstendstraße 19690482 NurembergGermanyPhone: + 49 (0) 9 11 / 5 40 56 - 0Fax: + 49 (0) 9 11 / 5 40 56 - [email protected]

Sales Offi ce RavensburgBeckhoff Automation GmbHParkstraße 4888212 RavensburgGermanyPhone: + 49 (0) 7 51 / 3 54 15 50Fax: + 49 (0) 7 51 / 3 54 15 [email protected]

Offi ce Rhein/RuhrBeckhoff Automation GmbHEurotec-Ring 747445 MoersGermanyPhone: + 49 (0) 28 41/ 9 08 16 - 6Fax: + 49 (0) 28 41/ 9 08 16 - [email protected]

AustriaHeadquartersBeckhoff Automation GmbHHauptstraße 46706 BürsAustriaPhone: + 43 (0) 55 52 / 6 88 13 - 0Fax: + 43 (0) 55 52 / 6 88 13 - [email protected]

Sales Offi ce OberösterreichBeckhoff Automation GmbHSoftwarepark 354232 HagenbergAustriaPhone: + 43 (0) 72 36 / 2 09 25 - 0Fax: + 43 (0) 72 36 / 2 09 [email protected]

Sales Offi ce NiederösterreichBeckhoff Automation GmbHLeobersdorferstraße 422560 BerndorfAustriaPhone: + 43 (0) 26 72 / 8 19 75 - 9 80Fax: + 43 (0) 26 72 / 8 19 75 - 9 [email protected]

Sales Offi ce TirolBeckhoff Automation GmbHKlammstraße 66 / 396020 InnsbruckAustriaPhone: + 43 (0) 512 / 236 043Fax: + 43 (0) 512 / 236 [email protected]

BelgiumBeckhoff Automation BVBAKempische Steenweg 305 bus 2023500 HasseltBelgiumPhone: + 32 (0) 11 / 24 08 00Fax: + 32 (0) 11 / 24 08 [email protected]

Multiprox N.V.Lion d‘Ôrweg 12P.b. 719300 AalstBelgiumPhone: + 32 (0) 53 / 76 65 66Fax: + 32 (0) 53 / 78 39 [email protected]

BulgariaKastiva GmbH 68-72 Ami Bue Str., 4. Floor1612 Sofi aBulgaria Phone: + 3 59 (2) 9 50 44 31 Fax: + 3 59 (2) 9 51 59 80 offi [email protected]

Czech Republic, Slovac RepublicDyger s.r.o. Vystaviste 1648 59 BrnoCzech RepublicPhone: + 420 5 / 41 32 10 04 Fax: + 420 5 / 41 24 92 [email protected]

DenmarkHeadquartersBeckhoff Automation ApSNaverland 22600 GlostrupDenmarkPhone: + 45 43 / 46 76 20Fax: + 45 43 / 46 63 [email protected]

Sales Offi ce Beckhoff Automation ApS Centervej 2 6000 Kolding Denmark Phone: + 45 76 / 31 20 72 Fax: + 45 76 / 31 20 13 [email protected]

Finland, EstoniaHeadquartersBeckhoff Automation OyP.O. Box 23Kankurinkatu 4-605801 HyvinkääFinlandPhone: + 358 (0) 20 / 7 42 38 00Fax: + 358 (0) 20 / 7 42 38 [email protected] www.beckhoff.fi

Sales Offi ce SeinäjokiBeckhoff Automation OyMatinkatu 260320 SeinäjokiFinlandPhone: + 358 (0) 20 / 7 42 38 50Fax: + 358 (0) 20 / 7 42 38 [email protected]

Sales Offi ce TampereBeckhoff Automation OyHermiankatu 1 B33720 TampereFinlandPhone: + 358 (0) 20 / 7 42 38 70Fax: + 358 (0) 20 / 7 42 38 [email protected]

FranceBeckhoff Automation SarlImmeuble “Le Montréal”ZA de Courtaboeuf19 bis, avenue du Québec91951 Courtaboeuf CedexFrance Phone: + 33 (0) 1 69 29 83 70Fax: + 33 (0) 1 69 28 40 [email protected]

Great Britain, IrelandHayes Control SystemsThe BoathouseStation RoadHenley-on-ThamesOxon RG9 1AZGreat BritainPhone: + 44 14 91 / 41 05 39Fax: + 44 14 91 / 57 72 [email protected]

Greece, CyprusL. J. Skourgialos Industrial Automation Systems241 EL. Venizelou176 73 Kallithea /AthensGreecePhone: + 30 / 21 09 51 02 60Fax: + 30 / 21 09 51 10 [email protected]

HungaryControrg Kft.Pajta u. 148200 VeszpremHungaryPhone: + 36 / 88 42 40 75Fax: + 36 / 88 42 56 [email protected]

ItalyHeadquartersBeckhoff Automation S.r.l.Via E. Majorana, 120054 Nova Milanese (MI)ItalyPhone: + 39 03 62 / 36 51 64Fax: + 39 03 62 / 4 09 [email protected]

Sales Offi ce BolognaBeckhoff Automation S.r.l.Via Mazzini, 1240053 Bazzano (BO)ItalyPhone: + 39 05 1 / 83 40 06Fax: + 39 05 1 / 67 29 [email protected]

Lithuania, LatviaSantavilté UABTaikos 14952119 Kaunas Lithuania Phone: + 3 70 37 / 35 01 66 Fax: + 3 70 37 / 45 16 45 [email protected]

NetherlandsIndustrial Automation LinkKüppersweg 712031 EB HaarlemNetherlandsPhone: + 31 23 / 5 18 51 40Fax: + 31 23 / 5 18 51 [email protected]

PolandBeckhoff Automation Sp. z o.o.Stara Iwiczna, ul. Sloneczna 116A05-500 PiasecznoPoland Phone: + 48 22 / 7 57 26 10 Fax: + 48 22 / 7 57 26 [email protected]

PortugalBresimar – Sociedade de Equipamentos Eléctricos, Lda.Quinta do Simão – EN109 – EsgueiraApartado 30803801-101 AveiroPortugalPhone: + 351 234 / 30 33 20Fax: + 351 234 / 30 33 [email protected]

Romania Kreatron Automation S.R.L.Str. Octavian Fodor nr. 113, ap. 13400434, Cluj-Napocajud. ClujRomania Phone: + 40 264 / 48 47 08 Fax: + 40 264 / 48 47 08 offi [email protected]

RussiaHeadquartersRepresentation of Beckhoff Automation GmbHUl. Nizhnaya Krasnoselskaya 40/12kor. 20A, offi ce 501 105066 MoscowRussia Phone: + 7 495 / 411 88 82Fax: + 7 495 / 411 88 83Support: + 7 495 / 411 88 [email protected]

RepresentationNorth-West Federal DistrictBeckhoff Automation GmbHV.O., 7-ya Liniya, 76, offi ce 620 199178 Saint-Petersburg Russia Phone: + 7 812 / 332 62 05 Fax: + 7 812 / 332 62 [email protected]

RepresentationUral Federal DistrictBeckhoff Automation GmbHUliza Pervomaiskaya 104,Offi ce 108620219 EkaterinburgRussiaPhone: + 7 3 43 / 3 79 98 73Fax: + 7 3 43 / 3 79 98 [email protected]

RepresentationVolga Federal DistrictBeckhoff Automation GmbHKrasnoarmayskaya ul.1, Offi ce 312 443010 SamaraRussiaPhone: + 7 846 / 2 69 80 67Fax: + 7 846 / 2 69 80 [email protected]

Slovenia, CroatiaBeckhoff Avtomatizacija d.o.o. Zbiljska cesta 4SI-1215 MedvodeSloveniaPhone: + 386 / 51 64 05 [email protected]

SpainHeadquartersBeckhoff Automation S.A.Edifi cio Testa Sant CugatAvda. Alcalde Barnils, 64-6808174 Sant Cugat (Barcelona)SpainPhone: + 34 93 / 5 84 49 97Fax: + 34 93 / 5 84 40 [email protected]

Sales Offi ce BilbaoBeckhoff Automation S.A.Edifi cio UdondoC. Ribera de Axpe, no 504a planta, Ofi cina 4-548950 Erandio (Bilbao)SpainPhone: + 34 94 / 4 31 40 75Fax: + 34 94 / 4 80 50 [email protected]

Sales Offi ce MadridBeckhoff Automation S.A.Edifi cio CimagaSierra de Cazorla, 1Planta Baja, Ofi cina E28290 Las Matas (Madrid)SpainPhone: + 34 91 / 6 36 43 57Fax: + 34 91 / 6 36 43 [email protected]

Sweden, NorwayHeadquartersBeckhoff Automation AB Stenåldersgatan 2B 21376 Malmö Sweden Phone: + 46 (0) 40 / 6 80 81 60 Fax: + 46 (0) 40 / 6 80 81 61 [email protected] www.beckhoff.se

Sales Offi ce DanderydBeckhoff Automation ABEnebybergsvägen 10B18236 DanderydSwedenPhone: + 46 (0) 8 / 4 46 30 [email protected]

Sales Offi ce VärnamoBeckhoff Automation ABVästbovägen 5333153 VärnamoSweden Phone: + 46 (0) 40 / 6 80 81 [email protected]

SwitzerlandHeadquartersBeckhoff Automation AGRheinweg 98200 SchaffhausenSwitzerlandPhone: + 41 (0) 52 / 6 33 40 40Fax: + 41 (0) 52 / 6 33 40 [email protected]

Sales + Support Center Suisse RomandeBeckhoff Automation AGEn Chamard 351442 Montagny-près-YverdonSwitzerlandPhone: + 41 (0) 24 / 447 27 - 00Fax: + 41 (0) 24 / 447 27 - [email protected]

Support Center Ticinop.project saglVia Pianella 196596 GordolaSwitzerland Phone: + 41 (0) 91 / 745 01 [email protected]

TurkeyBeckhoff Otomasyon ltd. sti.Gardenya-3 Plaza No: 18-1934758 Atasehir IstanbulTurkeyPhone: + 90 216 580 9830Fax: + 90 216 580 [email protected]

North AmericaUSAHeadquartersBeckhoff Automation LLC12150 Nicollet Avenue SouthBurnsville, MN 55337USAPhone: + 1 952 / 890 0000Fax: + 1 952 / 890 [email protected]

North SalesBeckhoff Automation LLC12150 Nicollet Avenue SouthBurnsville, MN 55337USAPhone: + 1 952 / 808 6513Fax: + 1 952 / 890 [email protected]

Beckhoff Automation LLCN6256 Schraven CircleNorth Fond du Lac, WI 54937USAPhone: + 1 920 / 929 0655Fax: + 1 952 / 890 [email protected]

Northeast SalesBeckhoff Automation LLC6003 Candlestick DriveHarrisburg, PA 17112USAPhone: + 1 717 / 651 0591Fax: + 1 717 / 651 [email protected]

Northeast/EastApplication DevelopmentBeckhoff Automation LLC 2660 Elaine DriveLower Burrell, PA 15068USAPhone: + 1 724 / 339 4525Fax: + 1 724 / 339 [email protected]

Northwest Sales and Application DevelopmentBeckhoff Automation LLC16000 Bothell Everett HighwaySuite 170Mill Creek, WA 98012USAPhone: + 1 425 / 451 4444Fax: + 1 425 / 451 [email protected]

East Application DevelopmentBeckhoff Automation LLCRed Lion, PAUSA Phone: + 1 717 / 378 0433Fax: + 1 952 / 890 [email protected]

Mideast SalesBeckhoff Automation LLC4757 Ledgewood 7BMedina, OH 44256USAPhone: + 1 330 / 725 2403Fax: + 1 330 / 725 [email protected]

Beckhoff Automation LLC2289 Amsterdam AveCanton, MI 48188USAPhone: + 1 248 / 230 8835Fax: + 1 952 / 890 [email protected]

Midwest SalesBeckhoff Automation LLC12966 Fairway DriveLemont, IL 60439USAPhone: + 1 630 / 631 8467Fax: + 1 952 / 890 [email protected]

Midwest Application DevelopmentBeckhoff Automation LLC23041 Arbor Creek DrivePlainfi eld, IL 60544USA Phone: + 1 815 / 609 9984 Fax: + 1 815 / 609 [email protected]

South SalesBeckhoff Automation LLC4713 Martin RoadFlowery Branch, GA 30542USAPhone: + 1 770 / 965 3637Fax: + 1 770 / 965 [email protected]

SouthApplication DevelopmentBeckhoff Automation LLC3305 Breckinridge Blvd. Suite 116Duluth, GA 30094USAPhone: + 1 770 / 921 7550Fax: + 1 770 / 921 [email protected]

Southeast SalesBeckhoff Automation LLC713 Brittley WayApex, NC 27502USAPhone: + 1 919 / 367 0349Fax: + 1 919 / 367 [email protected]

Southwest Sales and Application DevelopmentBeckhoff Automation LLC8108 Beauregard DriveVolente, TX 78641USAPhone: + 1 512 / 653 1831Fax: + 1 512 / 828 6230 [email protected]

West Coast Technical CenterBeckhoff Automation LLC5820 Oberlin DriveSuite 111San Diego, CA 92121USAPhone: + 1 858 / 546 1111Fax: + 1 858 / 546 [email protected]

West SalesBeckhoff Automation LLC8175-A Sheridan Blvd # 141Arvada, CO 80003-1928USAPhone: + 1 303 / 429 0758Fax: + 1 303 / 429 [email protected]

CanadaHeadquartersApplication DevelopmentBeckhoff Automation Canada Ltd.130 Research Lane, Unit 11Guelph, ON N1G 5G3CanadaPhone: + 1 905 / 852 1534Fax: + 1 905 / 852 1535 [email protected]

SalesBeckhoff Automation Canada Ltd.35 Joliet StreetLondon, ON NV5 4V9CanadaPhone: + 1 519 / 451 8572Fax: + 1 905 / 852 1535 [email protected]

MexicoMexico Sales and Application DevelopmentIntegra Automation, SA de CVAv. Industrias 325-A78399 Fracc. TalleresSan Luis Potosí, S.L.P.MexicoPhone: + 52 444 / 822 2615 al 17Fax: + 52 444 / 822 [email protected]

South AmericaArgentinaeFALCOMAlcorta 2411CPA B1744HFMMoreno / Buenos AiresArgentinaPhone: + 54 237 / 463 1151Fax: + 54 237 / 463 [email protected] www.efalcom.com

BrazilBeckhoff Automação Industrial Ltda. Rua Continental, 146 – Jd. do MarSão Bernardo do Campo São Paulo 09750-060 Brazil Phone: + 55 (11) 4126-3232 Fax: + 55 (11) 4330-3701 [email protected] www.beckhoff.com.br

ChileTecmel Chile S.A.Padre Orellana 1486 SantiagoChile Phone: + 562 / 596 2541Fax: + 562 / 596 [email protected] www.tecmelchile.cl

AfricaEgypt Industrial Control Systems ICS 29 Dr. Mohamed El Harouny Street Nasr City, Cairo 11371 Egypt Phone: + 20 2 / 2 75 50 31 Fax: + 20 2 / 2 63 57 31 [email protected] www.ics-me.com

South AfricaBeckhoff Automation (Pty) Ltd Unit 8, Boskruin Business Park, Randpark Ridge Randburg 2188 South Africa Phone: + 27 (0) 11 792 3374 Fax: + 27 (0) 11 792 5453 [email protected] www.beckhoff.co.za

AsiaChina HeadquartersBeckhoff Automation (Shanghai) Co.,Ltd5th Floor, No.163 JiangChang San Road Shanghai Shibei Industrial ZoneShanghai, 200436P.R. ChinaPhone: + 86 21 / 66 31 26 66Fax: + 86 21 / 66 31 56 [email protected]

Representation Beijing Beckhoff Automation GmbHRoom 1608, Tower B, Investment Plaza, No. 27 Financial Street Xicheng DistrictBeijing, 100032P. R. China Phone: + 86 10 / 66 21 09 91 Fax: + 86 10 / 66 21 09 [email protected]

Representation Guangzhou Beckhoff Automation GmbHCitic PlazaRoom 1418233 Tianhe North RoadGuangzhou, 510620P. R. ChinaPhone: + 86 20 / 38 77 35 71Fax: + 86 20 / 38 77 35 [email protected]

Documents

Beckhoff Water Treatment 2008