Upload
vangeliskyriakos8998
View
63
Download
14
Tags:
Embed Size (px)
Citation preview
BDMS / BTMS for 2-stroke Diesel engines
Bearing Distance and Temperature Monitoring System
A comprehensive but cost-attractive way to protect your engine
Monitored by BDMS:Bearing wear via distanceSplash oil temperatureWater in oilMain bearing temperature (optional)
1Dr. E. Horn GmbH 29.10.2009 1
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Distance and Temperature Monitoring System w hy
Why ?BDMS provide an early warning in case of starting warning in case of starting bearing failuresBDMS will reduce operational costs by avoiding scheduled opening of bearingsBDMS is a step from time based to condition based maintenanceBDMS is a step to safe human resources
Dr. E. Horn GmbH 29.10.2009 2
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System Type Approval Certif icates
• Germanischer Lloyd No. 44 350 – 07HH• ABS 07-HG290027-PDA• LRS• RINA• BV under progress• DNV under progress
Dr. E. Horn GmbH 29.10.2009 3
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring principle
At the bottom dead centre (BDC) the journals of all 3 bearings (main, crank pin and crosshead) are loaded.The inertia forces are downwards looking, no gas force is affecting the system.An instant detection of slowly or emerging bearing wear is carried out, indicated and recorded in the indication panel. A prediction of the remaining lifetime of the bearings is possible at any time.It is also possible to indicate with utmost plausibility which one of the bearing (main, crank pin or crosshead) is affected.
Source: MAN
Dr. E. Horn GmbH 29.10.2009 4
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring principle
Bearing Distance Monitoring System
The system measures continuously the distance between the crosshead location in the bottom dead centre (BDC) in relation to the engine
1
relation to the engine frame at 2-stroke Diesel engines by means of 2 sensors per compartment (sensor A and sensor B). The measured values are calculated into real distance values in “mm” by the sensors and stored in an internal memory inside the sensors.
1 Cylinder number2 Bracket 3 Sensor A compartment cylinder 14 Sensor B compartment cylinder 1
5 Sensor A compartment cylinder 2
2 2
34
5
Dr. E. Horn GmbH 29.10.2009 5
Bearing Distance and Temperature Monitoring System
Typical Setup of a Bearing Wear Monitoring System24VDC 24VDC
PC
Typical Setup of a Bearing Monitoring System
Engine
Sensors
ConnectionBoxes
SensorCablesTransfer Box
RS232-I/O forService Purposes
BDMS / BTMS
RS232
RS422-Bus RS232-Bus + PowerPower
Power
Prüfaufbau EMV.cdr B3
Engine Control Room Engine Room
Cable lengths:
RS422-Bus: Length max. 200 m
RS232-Bus + Power: Cable length between connection boxes 1..2 m, length from transfer box to the last connection box 10..30 m
Sensor cable: Length 10 m
Handheld
RS232 connection/power
Terminal Box
Dr. E. Horn GmbH 29.10.2009 6
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System indication
All available components installed
1 Oil-temperature at sensor A2 Optical button "Down"3 Compartment number4 Optical button "Up"5 Oil-temperature at sensor B6 Distance between sensor B and
crosshead in percent
1 4 52 3
crosshead in percent7 Main bearing temperature at
sensor B8 LED indicating correctly working
water-in-oil sensor9 LED indicating number of
Installeddistance sensors
10 Main bearing temperature atsensor A
11 Distance between sensor A andcrosshead in percent
7
11 6
9 8
10
internal memory space for the data for appr. 10 yea rs
Dr. E. Horn GmbH 29.10.2009 7
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System indication
1. alarm at +/-0,3 mm2. alarm at +/-0,5 mm
Dr. E. Horn GmbH 29.10.2009 8
100 % correspond to 0,5 mm bearing material
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System handheld
•for placing ID no. of spare sensors•needed in case of bearing exchange•for reading out of stored data for a specific period of time•for filling out of base data for “XML” protocol
Dr. E. Horn GmbH 29.10.2009 9
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System installation
Installation possible by means of:
•engine makers
•ship yards•ship yards
•Ship’s crews (assistance possible)
•World wide operating HORN teams of experts
•RETROFIT possible
Dr. E. Horn GmbH 29.10.2009 1 0
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System scope of delivery
Sensor exchange tool
Water in oil sensor type FRG00032
Sensor type IW000184 Identification unit
Not necessary any more!
magnetic clipsOptional analogue/digital main bearing temperature sensor type TGL00921
1 Bolt2 NordLock® disc3 Alignment pin4 Sensor bracket
Dr. E. Horn GmbH 29.10.2009 11
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System/ LagMon - Short and l ong term history
View to optional LagMon program installed on engine PCPC
Short and long term history included in LagMon
Dr. E. Horn GmbH 29.10.2009 12
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System Software for Technical Departments of owners
-20%
0%
20%
40%
60%
80%
100%
Dis
tanc
e
Compartment 1 forward
Distance
100% = 0,5 mm
+/-0,3 mm 1. alarm+/-0,5 mm 2. alarm
04.0
6.20
07
11.0
6.20
07
18.0
6.20
07
25.0
6.20
07
02.0
7.20
07
09.0
7.20
07
16.0
7.20
07
23.0
7.20
07
30.0
7.20
07
06.0
8.20
07
13.0
8.20
07
20.0
8.20
07
27.0
8.20
07
03.0
9.20
07
20
30
40
50
60
70
80
2,0
2,5
3,0
3,5
4,0
4,5
5,0
04.0
6.20
07
11.0
6.20
07
18.0
6.20
07
25.0
6.20
07
02.0
7.20
07
09.0
7.20
07
16.0
7.20
07
23.0
7.20
07
30.0
7.20
07
06.0
8.20
07
13.0
8.20
07
20.0
8.20
07
27.0
8.20
07
03.0
9.20
07
Tem
pera
ture
/ °C
Dis
tanc
e/ m
m Distance
Temperature
Dr. E. Horn GmbH 29.10.2009 13
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System reference listReferencelist Dr. E. Horn´s BWM Systems
Vessel name Company: System Engine Type
CAPE CHARLES DS Schiffahrt GmbH & Co. KG BTMS, 03/2006 MAN B&W 6S50MC
ELEKTRA / testship under LRS Wallenius BDMS Serie, 05/2005 MAN B&W 8S60MC
NORASIA ALYA / testship under GL Döhle BDMS Serie, 04/2005 MAN B&W 7K80MC-C (Cegielski)
EAST LONDON (NB1271 Sietas) DHL BDMS Serie, 06/2006 MAN B&W DE6L70MEC (Iszar)
CGM CMA CARIBEAN (NB1272 Sietas) CGM CMA BDMS Serie, 08/2006 MAN B&W DE6L70MEC (Iszar)
PEARL EXPRESS PEARL MARITIMA SHIPHOLDING PANAMA BDMS Serie, 02/2006 MAN B&W 6S50MC Mitsui)PEARL EXPRESS PEARL MARITIMA SHIPHOLDING PANAMA BDMS Serie, 02/2006 MAN B&W 6S50MC Mitsui)
ITAL ORDINE Hartmann BDMS Serie, 08/2007 MAN B&W 7K80MC-C (HHI)
SEA LAVENDER Eastern Mediteranean BDMS Serie, 10/2007 MAN B&W 6S50MC-C
ASTRO CARINA Kristen Navigation BDMS Serie, 09/2008 MAN B&W 6S90MC-C (HHI)
MIRELLA MSC BDMS Serie, 08/2008 MAN B&W 6L70MC
DENISSE MSC BDMS Serie, 09/2008 Sulzer 10 RND 90
ALPANA MSC BDMS Serie, 11/2008 Sulzer 10 RND 90
Pow er Station GUAM MAN Copenhagen BDMS Serie 09/2008 10 K90 MC-C
BANU MSC BDMS Serie 04/2009 MAN B&W 7K90 MC-C (HHI)
MINERVA MARINA MINERVA Hull S361 (delivered by HHI Samho) BDMS Serie 03/2009 MAN B&W 6S70 MC-C (HHI)
ASTRID MSC BDMS Serie, 05/2009 MAN B&W 7K 90MC-C (HHI)
MINERVA VERA MINERVA Hull 362 (delivered by HHI Samho) BDMS Serie, 05/2009 MAN B&W 6S70 MC-C (HHI)
Maersk Bogor Maersk BDMS Serie, 05/2009 MAN B&W 7K80ME-C9 (HHI)
Lombok Strait Triton BDMS+BTMS Serie, 08/2009 MAN B&W 7S60 MC-C (Mitsui)
NB197 (sea trial 07/2009) Maersk under construction at HHIC (HANJIN) BDMS serie, system installed 06/2009 MAN B&W 7K80ME-C9 (HHI)
Those engines are already installed and ships are r unning
Dr. E. Horn GmbH 29.10.2009 14
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System reference listSets delivered, w aiting for installation under prog ress
Vessel name Company: System Engine Type
Sisterships from SEA LAVENDER Eastern Mediteranean BDMS Serie, system delivered MAN B&W 6S50 MC
Sisterships from SEA LAVENDER Eastern Mediteranean BDMS Serie, system delivered MAN B&W 6S50 MC
Sisterships from SEA LAVENDER Eastern Mediteranean BDMS Serie, system delivered MAN B&W 6S50 MC
Sisterships from SEA LAVENDER Eastern Mediteranean BDMS Serie, system delivered MAN B&W 6S50 MC
Sisterships from SEA LAVENDER Eastern Mediteranean BDMS Serie, system delivered MAN B&W 6S50 MC
new building Maersk under construction at HHIC (HANJIN) BDMS Serie MAN B&W 7K80ME-C9 (HHI)
new building Maersk under construction at HHIC (HANJIN) BDMS Serie MAN B&W 7K80ME-C9 (HHI)
NB895 DÖHLE under construction at CSBC BDMS+BTMS serie, system installed 10 RTA96C Wärtsilä (DOOSAN)
NB896 DÖHLE under construction at CSBC BDMS+BTMS serie, installation 08/2009 10 RTA96C Wärtsilä (DOOSAN)
NB897 DÖHLE under construction at CSBC BDMS Serie, system delivered 10 RTA96C Wärtsilä (DOOSAN)
NB898 DÖHLE under construction at CSBC BDMS+BTMS 10 RTA96C Wärtsilä (DOOSAN)NB898 DÖHLE under construction at CSBC BDMS+BTMS 10 RTA96C Wärtsilä (DOOSAN)
NB899 DÖHLE under construction at CSBC BDMS+BTMS 10 RTA96C Wärtsilä (DOOSAN)
NB900 DÖHLE under construction at CSBC BDMS+BTMS 10 RTA96C Wärtsilä (DOOSAN)
NB932 DÖHLE under construction at CSBC BDMS+BTMS serie, system installed 7 RTA96C Wärtsilä (DOOSAN)
NB933 DÖHLE under construction at CSBC BDMS+BTMS serie, installation 08/2009 7 RTA96C Wärtsilä (DOOSAN)
NB934 DÖHLE under construction at CSBC BDMS Serie, system delivered 7 RTA96C Wärtsilä (DOOSAN)
NB935 DÖHLE under construction at CSBC BDMS+BTMS 7 RTA96C Wärtsilä (DOOSAN)
NB936 DÖHLE under construction at CSBC BDMS+BTMS 7 RTA96C Wärtsilä (DOOSAN)
NB937 DÖHLE under construction at CSBC BDMS+BTMS 7 RTA96C Wärtsilä (DOOSAN)
new building unknow n under construction at Brodogradiliste, Split BDMS serie, system installed 06/2009 MAN B&W 6S50MC-C (Brodosplit)
NB939 unknow n under construction at Brodogradiliste, Split BDMS Serie, system delivered MAN B&W 6S50MC-C (Brodosplit)
Retrof it ordered by MAN Primeserv for Turkish Ow ners in 2008 >> BDMS Serie, system delivered for 8L35MC - 6S50MC-C
Retrof it status of installation unknow n BDMS Serie, system delivered for 8L35MC - 6S50MC-C
Retrof it ordered by MAN Primeserv for Turkish Ow ners in 2008 >> BDMS Serie, system delivered for 8L35MC - 6S50MC-C
Retrof it status of installation unknow n BDMS Serie, system delivered for 8L35MC - 6S50MC-C
Retrof it ordered by MAN Primeserv for Turkish Ow ners in 2008 >> BDMS Serie, system delivered for 8L35MC - 6S50MC-C
Retrof it status of installation unknow n BDMS Serie, system delivered for 8L35MC - 6S50MC-C
Retrof it ordered by MAN Primeserv for Turkish Ow ners in 2008 >> BDMS Serie, system delivered for 8L35MC - 6S50MC-C
Retrof it status of installation unknow n BDMS Serie, system delivered for 8L35MC - 6S50MC-C
Dr. E. Horn GmbH 29.10.2009 15
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System references
M/V Norasia AlyaM/V Ital Ordine M/T Pearl Express
MSC Denisse
M/T Astro Carina MV Lombock Strait
Dr. E. Horn GmbH 29.10.2009 16
BDMS / BTMS
Bearing Distance and Temperature Monitoring System
Bearing Wear Monitoring System advantages
Summary Advantages of the BDMS of Dr. E. Horn GmbH
• Easy installation inside the engine, no drilling ne eded; no cable trays needed
• Easy connection of sensors in terminal box, no mix up possible • Intelligent distance sensor with splash oil tempera ture measurement
and oil temperature alarm per compartment and oil temperature alarm per compartment • Main bearing temperature sensors available; also no drilling needed
for installation • Easy integration of water in oil and main bearing t emperature sensors • Open architecture of the system for possible future replacement of OMD • Protection already from engine start • Competitive price • Approved by MAN without separate PC • Well known and proven worldwide supplier of classif ied marine products
with AS network • If customer wants more information LagMon and techn ical management
software including necessary connection material ca n be included in scope of supply
Dr. E. Horn GmbH 29.10.2009 17