Upload
witchayut-pongsakul
View
215
Download
2
Embed Size (px)
DESCRIPTION
รายงานเกี่ยวกับการทำอุปกรณ์ยก bearing
Citation preview
Bearing Moving Machine
What did I do?Since 29 June until 10 July 27, 2015. I received the assignment,
How did I do that?First, I drew 3D parts of a jig with guide and pin. So, I was able to analyze
function of each part in order to create on my own. After that, I assembled those parts
together and then made cylinder working. At this point, I knew how the hood jig work.
Subsequently, I started creating BH22 jig. First thing I got to do was locating
an exact location of the head clamp and I then figured out the jig `s body part such as
sizes, appearance, shape and strength. It took me several days to design BH22 because I
was not used to designing a jig. BH22 was my first jig design. For the others, It took me
2 days to design and create 3D parts of them.
What were advantages and knowledge I got?I had never designed a jig before but now I know how to design
a jig, what size and shape it should be, how to choose the proper size
of cylinder. The most important thing is now I can apply these
knowledge for the rest of my life.