Page 1 of 12

RIG ON SALE

(BD#7)

Bordrill is planning to sell one of its MR-8000 (Drillmec, Italian Made, 1080HP) rig and

complete package of inventory as listed below.

The rig is located at Aydın city in Eagan region (west side) of the Turkey. The closest port

and airport are in Izmir city (125km far away from rig site).

BD#7 DETAILED INVENTORY BORDRILL

MR-8000 (1080 HP) MOBILE DRILLING & WORKOVER RIG INVENTORY

1) General Rig Data 1 Rig Data Rig Name Drillmec MR-8000 Semitrailer Drillmec Rig S/N 12226 Year of construction 2008 Year of recertification December 2019 Static hook load 200 MT Setback Capacity 113 MT

2 Mast Data Make Drillmec Drillmec Mast S/N 12227

Type Four legs, open face, two - section,

telescopic Clear Height from Ground Level 36meter Clear Height from Drilling Floor 31meter

3 Substructure Drill Floor Height 5,2meter Clear Height Under Rotary Beam 4,2meter Drilling floor Dimensions (meter x meter) 7 x 5

4 Drawworks Make Drillmec Type Conventional Rated Input Power (HP) 1.080 Main drum make Drillmec Main drum size (inch x inch) 26" x 42 ½" Main drum static capacity 24 MT Main drum clutch 42 VC 650 Main drum grooved for line OD (inch) 1 1/8" Make-up cathead (make) Drillmec Break-out cathead (make) Drillmec Drill Line 1 1/8" 6 x 19 IWRC EIPS Brake type Brake Band

Page 2 of 12

Hydromatic Auxiliary Brake Make / Model Parmac / V80 Hydromatic Auxiliary Brake capacity 5.000 HP Hydromatic Auxiliary Brake Max. Pressure 15 psi Hydromatic Auxiliary Brake Max. Speed 1.550 RPM Hydromatic Auxiliary Brake Clutch 26 CB 525 Cooling fluid Water Crown-O-Matic device YES Drillmec

5 Compound Air system make Drillmec Air compressor engine Ingersoll Rand T30 mod 2475 Air compressor max. Working pressure 11 bar Air compressor max. HP in max. WP 7,1 HP Air tank capacity 500 lt Hydraulic System make Drillmec

6 Power Pack Diesel Engine Make / Model Caterpillar / C15 - ACERT Diesel Engine Hoisting Power 540 HP Diesel Engine Quantity 2ea Diesel Engine Rate 2.100 RPM Diesel Engine#1 Caterpillar S/N JRE04498

Diesel Engine#1 Caterpillar Arrangement Number 254-3835

Diesel Engine#2 Caterpillar S/N JRE04438

Diesel Engine#2 Caterpillar Arrangement Number 254-3835

Automatic Gear Box Make / Model Allison / S5610 H Automatic Gear Box Quantity 2ea Torque Converter TC680 Hoisting Speed 5 + 1 reverse

7 Rotary Drive and Rotary Table Make Drillmec Rotary Table Opening 27 ½" Max static load on table 320 MT Rotary air brake 16 CB 500 Rotary clutch 20 CB 500

8 Hydraulic Winch Max. Load pull on drilling floor 3.000 kg Max. Load pull on semi-trailer 5.000 kg

9 Drilling Equipment Travelling Block - Hook make American Block or equivalent

Travelling Block - Hook Working load capacity 226 MT

Hydraulic Elevation BOP make Drillmec

Hydraulic Elevation BOP total lifting capacity 20 ton

Page 3 of 12

10 Rig Instrumentation Dead line anchor single pull capacity 22,6 MT Dead line anchor load sensor E80 Tension 2)Mud System Make Drillmec Volume of Shale Shaker tank 60 m3 Volume of Intermediate tank 46 m3 Volume of Suction tank 46 m3 Volume of Mixing tank 60 m3 Water Tank 40 m3 1 Triplex Mud Pump Make / Model Drillmec / 9T1000 Quantity 2ea Mud Pump#1 Drillmec S/N 11973 Mud Pump#2 Drillmec S/N 11970 Design Horizontal design as per API 7K Rated Input (HP) 1.000 Valve Pot size 7 Mounted on Oilfield Skid

2 Diesel Engine for Mud Pump Make / Model Caterpillar C18 Acert Engine Power 600 HP @ 1.200 rpm Quantity 2ea for each mud pump

Mud Pump#1 Diesel Engine#1 Caterpillar S/N WJH03249

Mud Pump#1 Diesel Engine#1 Caterpillar Arrangement Number 237-1955

Mud Pump#1 Diesel Engine#2 Caterpillar S/N WJH03282

Mud Pump#1 Diesel Engine#2 Caterpillar Arrangement Number 237-1955

Mud Pump#2 Diesel Engine#1 Caterpillar S/N WJH03267

Mud Pump#2 Diesel Engine#1 Caterpillar Arrangement Number 237-1955

Mud Pump#2 Diesel Engine#2 Caterpillar S/N WJH03248

Mud Pump#2 Diesel Engine#2 Caterpillar Arrangement Number 237-1955

3 Transmission for Mud Pump Make / Model Drillmec / TC955 Torque Converter

or equivalent 4 Pulsation Dampener Make / Model Hydrill K20-5000 or equivalent Quantity 1ea (for each pump)

Shale Shaker Tank

Page 4 of 12

1 Shale Shaker Make / Model Swaco / MONGOOSE PT Quantity 2ea Electric Motor 400V - 50Hz ex-proof

2 Mud Cleaner Make / Model Swaco / 2-12/6T4/Mongoose PT Quantity 1ea Electric Motor 400V - 50Hz ex-proof

3 Degasser

Make / Model Swaco / Vacuum Degasser

Horizontal Type Quantity 1ea Electric Motor 400V - 50Hz ex-proof

4 Mud Agitators Make / Model Swaco or equivalent / c/w blades Quantity 2ea Electric Motor 15 KW-400V – 50Hz ex-proof Intermediate Tank 1 Centrifugal Pump Quantity 2ea Used for Solid Equipment Electric Motor 75kW-400V – 50Hz ex-proof

2 Mud Agitators Quantity 2ea Electric Motor 15kW-400V – 50Hz ex-proof Suction Tank 1 Supercharging Centrifugal Pump Quantity 2ea Electric Motor 75kW-400V – 50Hz ex-proof

2 Mud Agitators Quantity 2ea Electric Motor 15kW-400V – 50Hz ex-proof Mixing Tank 1 Mud Agitators

Quantity 2ea Electric Motor 15kW-400V – 50Hz ex-proof Mixing Unit 1 Centrifugal Pump Quantity 2ea Used for Solid Equipment Electric Motor 75kW-400V – 50Hz ex-proof

2 Hoppers Quantity 2ea Size 6” Trip Tank

Page 5 of 12

1 Quantity / Equipped with 1ea / 6 m3 w/centrifugal pump & electrical motor

Poor Boy Degasser 1 Quantity 1ea (mounted on top of the trip tank

complete with inlet and outlet pipes) 3) Power System 1 Power Generator Make / Model Caterpillar / C15 Quantity 2ea Prime Power 400ekW-453kW Frequency 50Hz Speed 1.500 RPM Diesel Generator#1 Caterpillar S/N FTH02631 Diesel Generator#2 Caterpillar S/N FTH02628

2 MCC – Switch Gear Panel Quantity 1ea MCC for mud system 400V / 50Hz MCC for lighting system 220V / 50Hz 4)Auxiliary Equipment 1 Water Cooling System Water Tank Capacity 5 m3 Water pump flow 30 m3/h Water pump motor 400V/50Hz ex-proof Quantity 1ea

2 Fuel Tank Capacity 60 m3 + 5 m3 Quantity 1set 5)Hydraulic Top Drive (HTD 250) 1 General Information Make Drillmec Drillmec P/N 12441 Quantity 1ea Bore 3" Rated Circulating Pressure 5.000 psi - 35 MPa Hydraulic System Requirement 868 lt - 35 MPa Auxiliary Hydraulic System 225 lt - 55 MPa

2 Circulation Swivel Make Drillmec Wash Pipe ID 3" Max. WP 350 bar Quantity 1ea

3 Rotating Double Hook Make Drillmec Quantity 1ea

4 IBOP Valve

Page 6 of 12

Make Drillmec OD 7 ¾" ID 3 1/6" Working Pressure 345 bar (5.000PSI) Quantity 1ea Connection NC50 Box & Pin

5 Top Drive Hydraulic Power Unit Quantity 1ea (Container) TD HPU Drillmec P/N 12442 Diesel Engine Quantity 1ea Diesel Engine Make / Model Caterpillar / C15 Diesel Engine Power 540 HP Diesel Engine Speed 1.800 RPM Diesel Engine Number of Cylinder 6 in line Diesel Engine Caterpillar S/N MCW05469

6 Top Drive Rails Quantity 4ea 9) RIG FLOOR EQUIPMENT 1 D.P. and D.C. ROTARY TONGS Quantity (No.) 2ea Type Rotary Range size from 3 ½ " Range size to 14 3/8”

2 ELEVATOR LINKS Set 1ea Length, 1 Set 2 ¼" x 108" Rated capacity 250 t 10) DRILLING INSTRUMENTATION 1 DRILLING CONSOLE 2 WEIGHT INDICATOR Dead-line load

3 MUD PUMP PRESSURE GAUGES Pressure range 0 – 5000 Psi

4 ROTARY TORQUE INDICATOR 5 ROTARY SPEED TACHOMETER For Top Drive 6 TONG TORQUE INDICATOR 7 MUD PUMP STROKE INDICATOR

Quantity (No.) 2ea 7) Others 1 Dog House (Drillmec Made) 1ea 2 Dog House Support 1ea 3 High Pressure Ground Line 1ea 4 Monkey Board 1ea 5 Mud Tanks Walkways 8ea 6 Carrier Walkways 12ea

Page 7 of 12

7 Handrails 39ea 8 Rotary Hose 1ea 9 Mud Pump Discharge Hose 2ea

10 Exhaust 2ea 11 Cable Tray 1set 12 Suction Line 1ea 13 Stand Pipe Manifold 1ea 14 Stairs 5ea 15 BOP Skid & BOP Trolley 1ea 16 Vee Door 1ea 17 Driller Panel 1ea 18 Drilling Recorder 8 Pen 1ea 19 Rig Lightening System 1set 20 Mud Tanks Lightening System 1set

* Technical parameters are given by the manufacturer Drillmec. It may change with

formation, well profile and other conditions.

Page 8 of 12

Pictures

Pic.1: Carrier

Page 9 of 12

Pic.2: Mud Pumps and Mud Pumps Engines

Pic.3: Mud Pumps Engines

Page 10 of 12

Pic.4: Mud Pumps, Mud Tanks, Carrier, Mast, Mud Tank Connections, Hopper, Dog House

Pic.5: Mud Tank and Poor Boy

Page 11 of 12

Pic.6: Mud Tanks and Carrier

Pic.7: Substructure, Solid Control Equipment

Page 12 of 12

Pic.7: Top Drive and HPU