Upload
aqua-technology-group
View
244
Download
10
Tags:
Embed Size (px)
DESCRIPTION
B&B Electronics 2011 Serial Connectivity Catalog, Converters, Repeaters, Fiber Optic Converters, Inline Converters & Isolators, RS-485 Port-Powered Converters, RS-422 Port-Powered Converters, Current Loop Converters, TTL Converters, CAN Converters, PCI Cards, PCMCIA Cards, Serial ExpressCards, Modem Splitters, Port Combiners, Data Taps
Citation preview
Port Powered ConvertersPort-powered Converters (pages 18-21)You don’t need a power supply with these converters as our engineers know how to squeeze the last Milliwatt outof an RS-232 port.
Current Loop and TTL Converters Current Loop Converters and TTL Converters (pages 28-29)Make easy connections between your current loop and TTL equipment.
Isolated Multi-Interface PCI CardsOne to eight ports – RS-232/422/485 (pages 33-35)B&B Electronics cards protect PCs and peripherals or add ports. Choose from wide isolation zones, low-profiledimensions, and more.
Splitters and SwitchesModem Data Splitters, Port Combiners, Data Taps (page 31)Simpler technologies that complete your system and make your job easier.
Isolated Converters and ExtendersILinx Hardened Converters & Repeaters (pages 15-19)With a rugged IP30 metal panel-mount enclosure, ILinx hardened Class1/Division2 converters have been putthrough some of the most demanding compliance tests in the industry.
ILinx Industrial Converters & Repeaters (pages 15-19)DIN rail mounted industrial converters rated for Class 1 Division 2 applications.
Industrial Converters & Repeaters (pages 15-19)These converters and repeaters are suitable for most industrial applications.
Fiber Optic Converters (pages 26-27)Extend your serial data far beyond the 4000 foot limit imposed by the RS-485 standard. Single-mode and multi-mode options.
In-line Converters and Repeaters (pages 22-25)Economical solutions for your basic applications. Same robust isolation with a small in-line package.
Serial Communications SolutionsComplete industrial and commercial solutionsto keep your legacy serial equipment communicating
For many years, people have been predicting the demise of serial communications. But, as you know, there aremillions of nodes still performing in the field. To keep this perfectly good equipment up and operating, B&BElectronics has developed the most extensive line of serial conversion and isolation products on the market today.Serial products from B&B Electronics are built tough to keep your equipment up and your data flowing. Opticalisolation is built in to most of our products. This method of isolation is far superior to galvanic isolation, since there isno physical connection across the isolation zone. Visit www.bb-elec.com/Isolation. Automatic Send Data Controlcircuitry simplifies applications. No need for special programming to make your devices talk.
Serial
12
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
Ilinx™ HardenedConverters &Repeaters (pages 15-19)
RS-485 Port-Powered Converters (pages 18-21)
Current Loop Converters (pages 28-29)
RS-422 Port-Powered Converters (pages 18-21)
TTL Converters (page 28)
PCI Cards (page 34) PCMCIA Cards (page 35) ExpressCards (page 35)
Ilinx™ IndustrialConverters &Repeaters(pages 15-19)
IndustrialConverters &Repeaters (pages 15-19)
Fiber OpticConverters (pages 26-27) Inline
Converters &Isolators (page 22-25)
Serial
13
Converters
FiberOptics
Specialty
Converters
Splitters,
Com
biners,Data Tap
sData
Switches
Cards
Find more information at bb-elec.com: Enter Model No. Search
Modem Splitters, Port Combiners, Data Taps (page 31)
CAN Converters (page 30)
Serial
14
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
B&B Electronics - The Serial Communication ExpertsIndustrial strength converters and repeaters
Whether you need simple interface conversion, longer range, or to send your serial over even longer distances on a variety offiber optic, we’ve got you covered. We design, build and test these industrial workhorses to keep your equipment up andyour data flowing, day in and day out.
All of our industrial serial converters and repeaters come with 2KV isolation and wide temperature operation for harshindustrial environments. Set up is fast and easy – with built-in Automatic Send Data Control, there are no software drivers toinstall or configure.
Plus, with our Industrial Converters and all B&B Electronics products, you get:• In-stock for delivery when you need it.• Free expert technical support before, during, and after the sale.
Which Serial Converter is Right For You?
Choose by SpecificationIsolation 2-way data (2KV) 3-way on data and power (2KV) 3-way data and power (2KV)Housing Plastic Plastic MetalMounting DIN Rail DIN Rail PanelModbus Compatible Yes Yes YesShock and Vibration Tested YesWide Temperature Operation -40 to 80°C -40 to 80°C -40 to 85°CCertifications UL recognized UL 508, Class1 Div2 Class1 Div2
CE CE CENEMA TS1-TS2
IEEE 1613IEC 61850-3
TOUGH TOUGHER TOUGHEST
485LDRC9
485DRCi-PH
Shock and vibration tested3-way isolation Class 1 Division 2
Rock-solid reliabilityat the right price
485DRCi
Choose by ApplicationFactory automation
In-cabinet conversion
Warehouse automation
Security
Motors and drives
Heavy industrial
Oil and gas
Mining
Water/wastewater
Submetering
Electric utilities
Smart-grid applications
Traffic control
Convert Serial - page 15Extend Serial - page 16Serial to Fiber - page 17
232 485
Rock-Solid Reliability at the Right Price
Triple Isolation and Class 1/Div 2 Certificationfor Tough Industrial Environments
Ilinx™ Hardened – Shock and Vibration TestedFor Your Toughest Applications
Serial
15
Converters
FiberOptics
Telephone
Modem
sSpecialty
Converters
Splitters,
Com
biners,Data Tap
sSEL
Data
Switches
Cards
ISOLATED MODBUS WIDE TEMP
232 422/485
232 485
232 485
BUILT
F O R Y O UO.E.M.
See Page 24
Industrial Serial Converters
The world’s most popular Serial Converter is also our best value. Its compact designfits neatly in tight cabinets where it keeps working day in and day out. AutomaticSend Data Control means easy set-up and no software drivers to deal with.
Standing up to a wide variety of industrial applications makes Ilinx™ our most versatile serialconverter. Removable terminal blocks make wiring a snap. Automatic Send Data Control means nosoftware drivers to deal with. Built-in switchable termination and biasing make setup easy.
Housed in a Rugged IP30 – rated Metal Panel Mount Enclosure, the Ilinx™ Hardened isabsolutely our Toughest Industrial Serial Converter. Ilinx™ Hardened was designed tomeet the stringent requirements of electrical substations, but its resistance to shockloads and vibrations make it perfect for transportation or most any harsh environment.Built-in switchable termination and biasing make setup easy.
Specifications • RS-232 to RS-422/485 conversion• 2-way optical isolation, 2 KV on input/output • Wide temperature operation (-40 to +80C°)• Modbus compatible• DB9 or terminal block connection for RS-232• Terminal block connection for RS-422/485• Operates on 10-30 VDC• Panel mounts with optional adapter
Specifications • RS-232 to RS-422/485 conversion• 3-way isolation, 2 KV on data ports & power circuits• Wide temperature operation (-40 to +85C°)• Modbus compatible• DB9 connection for RS-232• Terminal block connections for RS-422/485• Wide range operation on 10-48 VDC• DIN rail mounts with optional bracket• IEC 60068-2-6 compliance, to 4G vibration• IEC 60068-2-27 compliance, to 50G shock
Specifications • RS-232 to RS-422/485 conversion• 3-way optical isolation, 2 KV on input/output and power circuits• Wide temperature operation (-40 to +80°C)• Modbus compatible• DB9 connection for RS-232• Terminal block connections for RS-422/485• Wide range operation on 10-48 VDC• Panel mounts with optional adapter
Model No. Description Price485LDRC9 Isolated RS-232 to RS-485 DIN rail mount converter $149.00485LDRC9KT Kit: (1) converter, (1) 24VDC power supply, (1) 9PAMF6 cable New! 199.00You May Also Need…MDR-20-24 24VDC, 1A DIN Rail Power Supply, Slimline 45.009PAMF6 DB9 Male to DB9 Female cable, 6' 11.00MDR-20-12 12VDC, 1.67A DIN Rail Power Supply, Slimline 45.00DRPM25 35mm DIN Rail to Panel Mount Bracket, 25mm wide 14.00
Removable terminal block
Convenient kit available
Removable terminal block
ISOLATED MODBUS WIDE TEMPCLASS1 /DIV2
Model No. Description Price485DRCi Triple isolated RS-232 to RS-422/485 DIN rail mount converter Lower Price! $199.00You May Also Need…MDR-20-24 24VDC, 1A DIN Rail Power Supply, Slimline 45.00MDR-20-12 12VDC, 1.67A DIN Rail Power Supply, Slimline 45.00DRPM25 35mm DIN Rail to Panel Mount Bracket, 25mm wide 14.00
ISOLATED MODBUS WIDE TEMP IEC 61850-3 IEEE 1613
Model No. Description Price485DRCI-PH Hardened RS-232 to RS-422/485 Converter $259.00You May Also Need…PS5R-SC24 C1D2 24VDC, 1.25A DIN Rail Power Supply, Slimline 75.60DRAD35 DIN rail adapter clips (pair) 5.00
CLASS1 /DIV2SHOCK &
VIBRATION
More products available at bb-elec.com: Search
Serial
16
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
485OPDRi
Model No. Description Price232OPDRi Triple isolated RS-232 DIN rail mount repeater $229.00485OPDRi Triple isolated RS-422/485 DIN rail mount repeater 229.00You May Also Need…MDR-20-24 24VDC, 1A DIN Rail Power Supply, Slimline 45.00MDR-20-12 12VDC, 1.67A DIN Rail Power Supply, Slimline 45.00
232OPDRiRemovable terminal blocks
Removable terminal blocks
Double the Range of Your Serial Devices
For More Rugged Environments, Step Up to Ilinx™ Isolated Repeaters
Industrial Serial Isolated Repeaters
485OPDR 232OPDR
ISOLATED MODBUS WIDE TEMP
232 2X Distance
422/485 2X Distance
Perfect if you want a sturdy, reliable repeaterwith isolation but don’t want to break the bank.These optically isolated repeaters will get thejob done at the best possible price. AutomaticSend Data Control means easy set-up and nosoftware drivers. Specifications
• 2-way optical isolation, 2KV on input/output• Wide temperature operation (-40 to +80°C)• Modbus compatible• DB9 or terminal block connection for RS-232• Terminal block connection for RS-422/485• Operates on 10-30 VDC• Panel mounts with optional adapter• LED indicators for power and data• Automatic Send Data Control• UL recognized
ILinx™ Hardened Isolated Repeaters –Designed for the Toughest Environments
With its rugged IP30 rated metal panel mount enclosure, ILinx™ Hardened can take on the mostabusive environments and perform with phenomenal reliability. Originally designed for installationin electrical substations, its specifications even exceed the NEMA TS1/TS2 requirements fortransportation applications. Choice of RS-232 and 422/485 models.
Specifications • 3-way optical isolation, 2KV on data ports and power circuits• Wide temperature operation (-40 to +85°C)• Modbus compatible• DB9 connectors (232OPDRI-PH)• Removable terminal blocks for serial connection (485OPDRi-PH)• Wide range operation on 10-48 VDC• DIN rail mounts with optional adapter• Automatic Send Data Control• LED indicators for power and data• IEC 60068-2-6 compliance, to 4G vibration• IEC 60068-2-27 compliance, to 50G shock
Specifications • 3-way optical isolation, 2KV on data portsand power circuits
• Wide temperature operation (-40 to +80°C)• Modbus compatible• DB9 connection for RS-232
• Terminal block connection for RS-422/485• Wide range operation on 10-48 VDC• Panel mounts with optional adapter• LED indicators for power and data• Automatic Send Data Control• Built-in switchable bias and termination resistors
Model No. Description Price232OPDR Isolated RS-232 DIN rail mount repeater $199.00232OPDRKT Kit: (1) 232OPDR converter, (1) 24VDC power supply 239.00485OPDR Isolated RS-422/485 DIN rail mount repeater 199.00485OPDRKT Kit: (1) 485OPDR converter, (1) 24VDC power supply 239.00You May Also Need…MDR-20-24 24VDC, 1A DIN Rail Power Supply, Slimline 45.00MDR-20-12 12VDC, 1.67A DIN Rail Power Supply, Slimline 45.00
ISOLATED MODBUS WIDE TEMP CLASS1 /DIV2
CLASS1 /DIV2
These tough models confidently perform day after day, year after year in industrialenvironments that would demolish pale imitators. Tough, but affordable – they’re anoutstanding investment in peace of mind. cUL Class I Div2 certification.
ISOLATED MODBUS WIDE TEMP IEC 61850-3 IEEE 1613
Model No. Description Price232OPDRI-PH Hardened RS-232 Isolated Repeater $279.00485OPDRI-PH Hardened RS-422/485 Isolated Repeater 279.00You May Also Need…PS5R-SC24 C1D2 24VDC, 1.25A DIN Rail 75.60
Power Supply, Slimline
232OPDRi-PH
485OPDRi-PH
232 2X Distance
422/485 2X Distance
232 2X Distance
422/485 2X Distance
Convenient kitsavailable
Serial
17
Converters
FiberOptics
Specialty
Converters
Splitters,
Com
biners,Data Tap
sData
Switches
Cards
Find more information at bb-elec.com: Enter Model No. Search
)
V2
Removable terminal blocks
FOSTCDRi-SCFOSTCDRi
232/422/485 Fiber
Serial to Multi-Mode Fiber at the Right Price
Industrial Serial to Fiber Optic Converters
ISOLATED MODBUS WIDE TEMP
Extending communications up to 2.5 miles is the job of B&B Electronics’ FOSTCDR line. Why paymore for features or distance you don’t need? If your application requires the fiber optic light to beoff in the idle state, choose the FOSTCDR-INV. Rugged dependability is yours - at our best price.
Specifications • RS-232/422/485 to multi-mode ST fiber optic conversion• 2-way optical isolation, 2 KV on input/output • Wide temperature operation (-40 to +80°C)• Modbus compatible• Multi-mode ST connectors• Operates on 10-30 VDC• Panel mounts with optional brackets• Automatic Send Data Control• LED indicators for power and data• UL recognized (FOSTCDR only)
Model No. Description PriceFOSTCDR RS-232/422/485 to multi-mode fiber optic converter, ST Lower Price! $279.00FOSTCDR-inv RS-232/422/485 to multi-mode fiber optic converter, ST Lower Price! 279.00FOSTCDRKT Kit: (2) FOSTCDR converters, (2) 24VDC power supplies, (2) cables Lower Price! 679.00
FOSTCDR
ILinx™ Triple Isolation and Up To 9 Mile Range
Our ILinx fiber converters are packed with functionality you need in heavier industrialenvironments. ILinx FOSTCDRi-SC and FOSTCDRi-ST extend communication up to 9miles (15 km). If you need cUL Class 1 Div 2 certification, select ILinx FOSTCDRi model.
Specifications • RS-232/422/485 to fiber optic conversion• 3-way optical isolation, 2 KV on input/output and power
• Wide temperature operation (-40 to +80°C)• Modbus compatible• Wide range operation on 10-48 VDC
• Panel mounts with optional brackets• Supports Fiber Ring Functionalities• Automatic Send Data Control• LED indicators for power and data• Multi-mode (ST) = 2.5 mi. (4 km)• Single-mode (SC) = 9 mi. (15km)• Switchable termination and biasing
ISOLATED MODBUS WIDE TEMP CLASS1 /DIV2(FOSTCDRi)
(FOSTCDR)
232/422/485 Fiber
ILinx™ Hardened – Shock and Vibration TestedFor Your Toughest Applications!
ILinx™ Hardened meets the demands of Electrical Substations, Subway Tunnels, and other tough environments. The IP30 metal panelmount enclosure lets this fiber converter handle the abuse. 1.2k� Transmit/Receive and Termination at 120�.Specifications • RS-232/422/485 to fiber optic conversion - with heavy-duty specifications• 3-way isolation: 2KV on data ports and power circuits• Wide temperature operation (-40 to +80°C)• Modbus compatible• IEEE 61850-3 & IEEE 1613• Removable terminal block for serial connection• Wide range operation on 10-48 VDC• DIN rail mounts with optional bracket• Multi-mode fiber extends communications to 4kM; single-mode (to 15kM)• IEC 60068-2-6 compliance, to 4G vibration• IEC 60068-2-27 compliance, to 50G shock
ISOLATED MODBUS WIDE TEMP IEC 61850-3 IEEE 1613
232/422/485 Fiber
Model No. Description PriceFOSTCDRi Triple Isolated RS-232/422/485 to multi-mode converter, ST Lower Price! $299.00
FOSTCDRi-SC Triple Isolated RS-232/422/485 to single-mode converter, SC Lower Price! 399.00FOSTCDRi-ST Triple Isolated RS-232/422/485 to single-mode converter, ST Lower Price! 399.00
Model No. Description PriceFOSTCDRI-PH-MC Hardened RS-232/422/485 to multi-mode fiber optic converter, SC Lower Price! $399.00FOSTCDRI-PH-MT Hardened RS-232/422/485 to multi-mode fiber optic converter, ST Lower Price! 399.00FOSTCDRI-PH-SC Hardened RS-232/422/485 to single-mode fiber optic converter, SC Lower Price! 499.00
FOSTCDRI-PH-SC
FOSTCDRi-PH-MT
FOSTCDRI-PH-MC
CLASS1 /DIV2
Convenient kit available
SHOCK &VIBRATION
BB60us_v1_02-135_BB49us 12/14/10 9:01 AM Page 17
On Facing Page Model RS-232 Connector RS-485 Connector Output Optional Power Supply Price
A 4WSD9R DB9 Female DB9 Female RS-485 2 or 4-wire 485PS $84or RS-422
B 485SD9TB DB9 Female Terminal Block RS-485 2-wire 485PS2 79
C 485BAT3 DB9 Female Terminal Block RS-485 2 or 4-wire (2) AAA batteries or 485PS2 99or RS-422
D 485SD9R DB9 Female DB9 Female RS-485 2-wire - 79
E 485LPCOR DB25 Female DB25 Male RS-485 2-wire 485PS2 79
F 485SD9RJ DB9 Female RJ-11 RS-485 2-wire - 79
G 485DRJ DB9 Female (2) RJ-11 RS-485 2 or 4-wire - 79
H 4WSD9TB DB9 Female Terminal Block RS-485 2 or 4-wire 485PS 84or RS-422
Port Powered RS-485 ConvertersConvert RS-232 to RS-485 quickly and easilyNo power supply or software drivers needed!
Why offer “optional” power supplies with port powered converters?Simply put, all RS-232 ports are not created equal. Many laptop PC’s for example, deliberately reduce power to the RS-232 port tosave the battery. And, if you are working at the distance limits of RS-422 or 485, you might need an extra boost. For the majority ofapplications though, port power is all our efficient converters need to get the job done. We just want to be sure that you’re covered,no matter what.
Look for this symbol indicating products with Send Data Control circuitry.
These port-powered converters quickly and easily change TD and RD RS-232 lines to RS-485 signals. All feature Automatic SendData Control which automatically enables the driver when data is present on the RS-232 side. Control of the driver is automatic atspeeds up to 115.2 kbps.
Our engineers know how to squeeze the last Milliwatt out of an RS-232 port to eliminate the need for external power. This popularproduct family is ideal for field service, any application where another power supply adds clutter, or anywhere you need compact,easy-to-use, economically priced serial conversion.
See our RS-485 Reference Guides at: www.bb-elec.com/technical_library.asp
Choose your port powered converter by interface/connector
You May Also Need…485PS 120 VAC to 12 VDC @ 100 mA (barrel connector) power supply $15485PS2 120 VAC to 12 VDC @ 100 mA (wired) power supply 15
• Powered from RS-232 handshake lines – no power supply needed!• Extend RS-232 signals to 4,000 feet (1.2 km)• Communicate at baud rates to 115.2 kbps • Automatic Send Data Control – no software drivers to install or manage
232 485
Serial
18
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
Technical Support NoteKelly Explains Why Send Data Control (SDC) Makes Serial Conversion Easier
As operating systems become more complex, it is increasingly difficult to control an RS-485 driverwith standard software and the RTS line. This is especially true in Windows and multi-taskingoperating systems. With B&B’s Automatic Send Data Control circuit, driver control is in the converterhardware, so you don’t have to work with software at all. The circuit monitors data flow and enablesthe driver during transmission and automatically disables it when no data is being sent. There is noneed to rework software or install new drivers. Most B&B Electronics RS-232 to RS-485 converters andRS-485 serial cards include Automatic Send Data Control.
MODBUS
Model Price4WSD9R $84
Model Price485BAT3 $99
Model Price485LPCOR $79
Model Price485DRJ $79
Model Price485SD9TB $79
Model Price485SD9R $79
Model Price485SD9RJ $79
Model Price4WSD9TB $84
RS-422/485 flexibility withthe convenience of DB9 termination
A B
C D
E F
G H
DIP switches to easilyconfigure RS-485 or RS-422
RS-232 onDB9 connector(female)
RS-485 2 or 4-wireor RS-422 on
DB9 connector (female)
RS-485 2 or 4-wireor RS-422 on terminal block
for easy, flexible wiring
RS-485 2 or 4-wireor RS-422 on terminal block
for easy,flexible wiring
Our #1, best selling portpowered converterEasy to buy – Easy to use
RS-232 onDB9 connector(female)
RS-485 2-wire onterminal block
for easy,flexible wiring
For when your RS-485terminates on a DB9
RS-232 on DB9 connector(female)
RS-485 2-wire onDB9 connector
(female)
RS-485 2 or 4-wire with theconvenience of RJ-11 connectors
RS-232 on DB9 connector(female)
RS-485 2-wireon RJ-11
connector
Wire it just the way you need it
RS-232 onDB9 connector(female)
Need extra power?Just slip in 2 AAA batteries
RS-232 onDB9 connector(female)
RS-485 2-wire onDB25 connector
(male)
Got legacy DB25’s?Here’s your solution
RS-232 onDB25 connector(female)
RS-485 2 or 4-wire on (2) RJ-11connectors in parallel
RJ-11 is a snap to terminateand connect
RS-232 onDB9 connector(female)
Serial
19
Converters
FiberOptics
Specialty
Converters
Splitters,
Com
biners,Data Tap
sData
Switches
Cards
DIP switches to easilyconfigure RS-485 or RS-422
DIP switches to easilyconfigure RS-485 or RS-422
More products available at bb-elec.com: Search
Serial
20
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
MODBUSPort Powered RS-422 ConvertersThe fast and easy way to serial conversion
• Extend data signals up to 4,000 feet (1.2 km)• Change TD and RD RS-232 signals to balanced RS-422 signals• Automatic Send Data Control – no software drivers to install or manage• Baud rates up to 115.2 kbps
232 422
On Facing Page Model RS-232 Connector RS-422 Connector Output Optional Power Supply Price
A 422PP9TB DB9 Female Terminal Block RS-422 422PS2 $79
B 422PP9R DB9 Female DB9 Female RS-422 - 79
C 422LP25R DB25 Female DB25 Male RS-422 - 79
D 422LPCOR DB25 Female Terminal Block RS-422 422PS2 79
E 4WSD9R DB9 Female DB9 Female RS-422 or 485PS 84RS-485 2 or 4-wire
F 4WSD9TB DB9 Female Terminal Block RS-422 or 485PS 84RS-485 2 or 4-wire
G 485BAT3 DB9 Female Terminal Block RS-422 or (2) AAA batteries 99RS-485 2 or 4-wire or 485PS2
Choose your port powered converter by interface/connector
You May Also Need…422PS2 120 VAC to 12 VDC @ 100 mA (wired) power supply $15485PS 120 VAC to 12 VDC @ 100 mA (barrel connector) power supply 15485PS2 120 VAC to 12 VDC @ 100 mA (wired) power supply 15
Why offer “optional” power supplies with port powered converters?Simply put, all RS-232 ports are not created equal. Many laptop PC’s for example, deliberately reduce power to the RS-232 port tosave the battery. And, if you are working at the distance limits of RS-422 or 485, you might need an extra boost. It’s also possiblethat your application does not include an RS-232 “handshake line” which carries most of the power. For the majority ofapplications though, port power is all our efficient converters need to get the job done. We just want to be sure that you’re covered,no matter what.
Look for this symbol indicating products with Send Data Control circuitry.
See our RS-422 Reference Guides at: www.bb-elec.com/technical_library.asp
Technical Support NoteJoe Explains Why Send Data Control (SDC) Makes Serial Conversion Easier
As operating systems become more complex, it is increasingly difficult to control an RS-485 driver withstandard software and the RTS line. This is especially true in Windows and multi-tasking operatingsystems. With B&B’s Automatic Send Data Control circuit, driver control is in the converter hardware,so you don’t have to work with software at all. The circuit monitors data flow and enables the driverduring transmission and automatically disables it when no data is being sent. There is no need torework software or install new drivers. Most B&B Electronics RS-232 to RS-485 converters and RS-485serial cards include Automatic Send Data Control.
SEND DATACONTROL
See Page 18
AUTOMATIC
Convert RS-232 TD and RD signals to RS-422, allowing range to be increased from the 50 feet (15 m) specified in the RS-232standard to 4,000 feet (1.2 km) at data speeds up to 115.2 kbps. No handshake driver control is required since the RS-422 driverand receiver are always enabled.
These models do not require an external power supply. They draw power from the RS-232 handshake lines. If handshake linesare unavailable, choose Model 422PP9TB or 422LPCOR and connect a 12 VDC power supply to the terminal block.
Serial
21
Converters
FiberOptics
Specialty
Converters
Splitters,
Com
biners,Data Tap
sData
Switches
Cards
Find more information at bb-elec.com: Enter Model No. Search
RS-422 or RS-485 at the flickof a switch
RS-232 on DB9 connector(female)
RS-422 or RS-485 2 or 4-wireon DB9 connector
(female)
RS-422 or RS-4852 or 4-wire onterminal block
for easy, flexible wiring
RS-422 on terminal block
Our #1 Best Selling PortPowered RS-422 Converter!
Simple • Flexible • Economical
RS-232 onDB9 connector(female)
RS-422 on terminal block
for easy, flexible wiring
For when your RS-422terminates on a DB9
RS-232 onDB9 connector(female)
RS-422 on DB9 connector
(female)
Got legacy DB25’s?Here’s your solution
RS-232 DB25 connector(female)
RS-422 on DB25 connector
(male)
Combines DB25 with theflexibility of terminalblock wiring
RS-232 onDB25 connector(female)
Our most versatile converter
RS-232 onDB9 connector(female)
DIP switches to easilyconfigure RS-422 or RS-485
Slip in 2 AAAbatteries formaximum distanceand portability
RS-422 or RS-485 2 or 4-wireon terminal block
for easy,flexible wiring
RS-422 or RS-485 – Wire itjust the way you want it
RS-232 onDB9 connector(female)
DIP switches to easilyconfigure RS-422 or RS-485
DIP switches to easilyconfigure RS-422 or RS-485
A
B
C
D
E
F
G
Model Price422PP9TB $79
Model Price422PP9R $79
Model Price4WSD9R $84
Model Price422LP25R $79
Model Price4WSD9TB $84
Model Price422LPCOR $79
Model Price485BAT3 $99
Isolated In-line Serial ConvertersConvert serial data and protect valuable equipment
Isolated Serial ConverterIsolation and conversion at the right price
DB25 Model4WSD25OTB
Model4WSD9OTB
Model485OI9TB
Model No. RS-232 Connector Price4WSD9OTB DB9 female $129.004WSD25OTB DB25 female 129.00
You May Also Need…485PS2 120 VAC to 12 VDC power supply 15.00
Model No. RS-232 Connector Price485OI9TB DB9 female $89.00
You May Also Need…485PS2 120 VAC to 12 VDC power supply 15.00
Compact Isolated Serial Converters
Top of the line Modbus-compatible serialconversion and isolation in one compact case.Converts RS-232 to RS-422 or RS-485 (2 or 4-wire).2000V 2-way optical isolation protects devicesfrom power surges, spikes and ground loops.Automatic Send Data Control means that thereare no software drivers to install or keep up with.
Removable terminal blocks for RS-422/485 andexternal power make wiring easy. Acceptsexternal power from 10-48VDC. Available withfemale DB9 or DB25 RS-232 inputs.
Our best value in isolated serial conversion. Converts RS-232to RS-422 or RS-485 (2 or 4-wire) with 1500V isolation toprotect your devices.
Requires 12VDC external power. Power supply soldseparately below.
Serial
22
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
232 422/485ISOLATED MODBUS SEND DATACONTROL
See Page 18
AUTOMATIC
RS-232 Line RepeatersAmplify weak RS-232 signals
Double the range of your RS-232 data signal. Repeaters may be daisy-chained for extra range. Many computers, laptops, and some desktopsship with low-power ports that are unable to drive port-powereddevices or full-length RS-232 cabling. Repeaters amplify these weaksignals up to the RS-232 standard. Model 232LB9R is a 9-pin version,boosting all eight signal lines and carrying ground through. Model232LB2 is a 25-pin version, boosting TD (Transmit Data), RD (ReceiveData), RTS (Request to Send), CTS (Clear to Send), CD (Carrier Detect)and DTR (Data Terminal Ready).
RS-422/485 on terminal block
RS-422/485 on terminal block
10-48 VDC onterminal block
12 VDC onterminal block
RS-232 on DB9 female
RS-232 onDB9 female
Model No. Description Price232LB9R 9-Pin RS-232 line repeater – DB9 F to DB9 M $54.00232LB2 25-Pin RS-232 line repeater – DB25 F to DB25 M 54.00
You May Also Need…232PS 12 VDC @ 100 mA power supply 15.00
Model232LB9R
Model232LB2
UL Listed
Protects and extends with one device
Protects up to 4 RS-232 channels
Port-powered for fast and easy protection
4,000 Volts isolation
In-line Isolators and Repeaters
Model No. Isolation Price485OP 2,000V, 2-way optical $149.00
Model No. Isolation Price9POP4 2,000V, 2-way optical $84.00
You May Also Need…232PS 12 VDC power supply 15.00
Model No. Isolation Price9SPOP2 2,500V, 2-way optical $79.00
Model No. Isolation Price232SPHI4 4,000V, 2-way optical $109.00
You May Also Need…232PS 12 VDC power supply 15.00
Model485OP
Model9POP4
Model9SPOP2
Model232SPHI4
RS-422/485 Optically Isolated Repeater
Optically isolates and protects devices, plus it extends the rangeof RS-422 and 485 data lines an extra 4,000 feet. The versatileterminal blocks even let you join 2-wire RS-485 with RS-422without the need for another converter – It’s like two devices in one!
4-Channel RS-232 Optical Isolator
Protect up to 4 RS-232 channels. With its external powersupply (item 232PS sold separately below), it’s ideal foruse with laptops that may have low-powered serial ports.
Port Powered RS-232 Optical Isolator
Our simplest and easiest to use isolator. It’s port powered,so it needs no external power supply – Just connect yourserial cables to the DB9 connectors and you’re protectedwith 2500 volts of optical isolation.
4KV RS-232 Optical Isolator
With 4,000 volts of isolation, you get twice the protection fromlightning strikes, ground loops and accidental shorts than mostother isolators. It even conforms to IEC 60601-1-2 specificationsfor industrial, hospital and non-life support medical applications.Port powered or use with optional power supply.
Serial
23
Converters
FiberOptics
Specialty
Converters
Splitters,
Com
biners,Data Tap
sData
Switches
Cards
More products available at bb-elec.com: Search
Wiring schematic right onlabel eliminates guess work
Terminal blocks forRS-422 or 2 and 4-wire RS-485
Adds an extra4000’ of range
RS-232 onDB9 maleconnector
RS-232 onDB9 maleconnector
RS-232 onDB25 maleconnector
Port powered oradd an externalpower supply
RS-232 onDB9 femaleconnector
RS-232 onDB9 femaleconnector
RS-232 onDB25 femaleconnector
Serial
24
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
Technical support helpscustomers identify andinstall the best productsolution.
Engineers develop, designand verify specificationsfor standard, OEM, andcustom products.
CAD (Computer AidedDrafting) schematicdesign and prototypeverification.
Computer AidedDrafting (CAD) PCboard engineering.
Product planning,material ordering, and manufacturingpreparations.
Product customization has always been a core service of B&B Electronics. With expertise incommunication technologies and protocol conversion, we have developed OEM products pluscustom solutions for air traffic control systems, automotive control panels, yachting navigationsystems, Wi-Fi video security, and more.
Custom product design – Teaming in-house design engineering with on-site manufacturing, B&B Electronicscan build a product for your unique needs. Services include hardware/software engineering, quick prototypesand production, documentation, and 100% product testing. High volume quantities not required. We offermany design options - wide range power inputs, rugged connectors, isolation, wide-temperaturespecifications, mounting options, and more. No need to compromise on a connector type or power range.
Custom variations of standard products – as low as 50 pieces. Need a pin-out change or an extra LED? Thesetypes of changes to our standard products can be engineered quickly. Because we manufacture in-house,minor product changes can be done quickly and economically.
OEM private labeling – Expand your product offering instantly - from a simple label change to a completemake-over with a custom label, case color, documentation and packaging. We do this all the time forcompanies whose names you’d instantly recognize.
OEM & Custom Products“Let’s discuss your OEM, private-labeling, or custom needs.”
1 2 3 4 5
Checking manufacturingprocesses duringproduction runs.
State-of-the-art surfacemount componentplacement.
Components are solderedby trained personnel.
Covering and labelingof finished products.
Final packaging andreview before shippingto customer.
6 7 8 9 10
“We can provide specialized wireless, serial, USB and Ethernet solutionsfor your data communication problems. I’ll work with you from buildinga product spec through design and manufacturing.” - Randy
Call OEM/Custom Engineering at815-433-5222 or visit: www.bb-elec.com/custom_request.asp
BUILT
F O R Y O UO.E.M.
485TBLED485COSR 485CSP2
with Surge Protection485PTBR
485DSS
Non-Isolated RS-485 ConvertersExtend communications up to 4,000 feet
232 422/485 SEND DATACONTROL
See Page 18
AUTOMATIC
Serial
25
Converters
FiberOptics
Specialty
Converters
Splitters,
Com
biners,Data Tap
sData
Switches
Cards
Find more information at bb-elec.com: Enter Model No. Search
Addressable RS-232 to RS-422/485 converter Network enable “dumb” RS-232 devices
Model No. RS-232 Connector RS-485 Connector Power Supply Special Features Price485CSP2 DB25 female Fused terminal block 485PS2 Built-in surge protection with replaceable fuses on RS-485 side. $84.00
LEDs show traffic. For 2- or 4-wire RS-485 or RS-422.485COSR DB25 female DB25 male 485PS For 2- or 4-wire RS-485. Full duplex operation possible. 64.00
485TBLED DB25 female Terminal block 485PS2 Data flow LEDs. SDC or software driver control. 74.00
Suits RS-422 systems, too.485PTBR DB9 female Pluggable terminal block 485PS2 Terminal block quickly unplugs for wiring ease. 79.00
Optional 4-wire, full-duplex RS-485 communicationYou May Also Need…4F125 125mA fuses for Model 485CSP2 (kit of four) 5.00485PS 120 VAC to 12 VDC @ 100 mA power supply 15.00485PS2 120 VAC to 12 VDC @ 100 mA power supply 15.00
Model No. Description Price485DSS Addressable RS-232 to RS-422/485 converter $139.00You May Also Need…485PS2 Required 120 VAC,12 VDC @ 100 mA power supply 15.00
Model No. Description Price422CEC 8 Channels, supports TD, RD, RTS, CTS, DTR, $109.00
DSR, DCD, spareRequires #422PS3 12 VDC power supply
422CFCR 4 Channels, supports TD, RD, RTS, CTS 79.00Requires #422PS 12 VDC power supply
422LCOR 2 Channels, with TD, RD LED traffic indicators 59.00Requires #422PS 12 VDC power supply
You May Also Need…422PS 120 VAC to 12 VDC @ 100 mA power supply 15.00
with power jack plug422PS3 120 VAC to 12 VDC @ 500 mA power supply 15.00
with power jack plug
2 Channel
8 Channel
4 Channel
RS-232 to RS-422 convertersChoose from 2, 4, or 8 channelsGreat for legacy devices with DB25 connectors
All models have DB25 female connectors on the RS-232 sideand DB25 male connectors on the RS-422 side.
Give some intelligence to your legacy "dumb" RS-232 serial devices.This addressable smart switch converts those old devices intonetwork nodes so you can program, control or monitor them overyour RS-422 or RS-485 network up to 4,000 feet away.
• Requires external Model 485PS2, 12 VDC power supply
232 422
232 422/485
RS-232 onDB25 male
2 or 4-wire RS-485,or RS-422
A
A
B
B
C
A
A
B
B
C
C
D
C D
Serial
26
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
232FLST
9PFLST
Remote and Reliable Data Communications
Transmit RS-232 data at 115.2 Kbps 4 km (2.5 miles) withport-powered fiber optic converters. Models 232FLST and9PFLST allow RS-232 serial devices to communicatetransparently over longer distances and with greaterreliability. These models support TD, RD, RTS and CTS andprovide the inherent immunity of fiber to data line surges,spikes and ground loops.
Model 232FLST has a DB25 female serial connector; 9PFLST aDB9 female. Both units have ST fiber connectors. Thesemodels draw power from the serial port in most applications.Order the optional 12 VDC power supply for use with lowpowered laptops and PCs.
Features• Port powered, no external power required • Transparently communicate RS-232 at 115.2 Kbps• Fiber is immune to surges, spikes, ground loops • Range up to 2.5 miles (4 km)• TD, RD, RTS and CTS supported
Fiber optic cable carries serial data reliably up to 4 kilometers(2.5 miles), much further than conventional copper lines. Fiberoptic data transmission uses light in glass fiber cable as acommunication medium. It is ideal for spanning areas withsevere interference, such as near heavy electrical equipment,welding or radio transmissions. Being non-electric, fiber opticcable will not pick up any noise.
Power surges and spikes are created by electrical equipment,by nearby lightning strikes and from other sources. They arepicked up by copper data lines and transmitted to theconnected devices, garbling messages and damagingequipment. Fiber optic cables do not transmit power spikes orsurges, providing the most reliable system possible. Groundloops interfere with data communications through copper.Using fiber optics eliminates ground loops by not providing aconductive path for the ground.
Model No. Description Price9PFLST RS-232 9-pin serial to fiber modem $169.00232FLST RS-232 25-pin serial to fiber modem 169.00You May Also Need…232PS Optional 120 VAC to 12 VDC @100 mA power supply 15.00
Fiber Optic ModemsThe reliable choice for minimum communications downtime
Satisfied Customers Say It BestI’ve been a B&B Electronics fan since the early ‘90’s and have been able to save the day several times withproducts right out of the catalog. This is an old plant with lots of RS-232 stuff and an abundance of heroopportunities. - Kurt Alderson, Electrical Engineer, Dynegy South Bay LLC, Chula Vista, CAFiber Optic Cables,
Couplers,Adapters, Testerpage 128
Technical Support NotebookTom: Fast, reliable fiber optic converters for RS-232/422/485
Many commercial and industrial environments present electrical noise and grounddifferential challenges, especially over long distances. Fiber optic links solve thoseproblems, providing high bandwidth connections that are impervious to noise andground differentials. Fiber optic data transmission uses light in glass for spanning areaswith severe interference. Fiber optic cable carries serial data reliably up to 4 kilometers(2.5 miles), much farther than conventional copper lines.
FiberOptic
Modem(9PFLST)
FiberOptic
Modem(9PFLST)
ISOLATED MODBUS
232 Fiber
FDF4SE
FDS4FE
Serial
27
Converters
FiberOptics
Specialty
Converters
Splitters,
Com
biners,Data Tap
sData
Switches
Cards
B&B Electronics fiber optic converters provide an economical and reliable method to use fiber in your data communicationssystem. They support RS-232/422/485 on any asynchronousserial device. These models require an external power source.Optional power supplies are available. Model FOSTDRP is afiber-to-fiber duplex repeater. It squares off and amplifies thefiber signal, doubling its range and overcoming fiber loss andconnector loss.
Features• Input power range (10-14 VDC)• Temperature range (0° to 70°C) • Data rates to 115.2 Kbps • Modbus compatible
Benefits• Inherent immunity to surges, spikes and ground loops • Range up to 2.5 miles (4 km)• Transmit (TD) and Receive (RD) lines supported• ST multi-mode fiber cable connections
Features• Monitor & control dozens of RS-232 nodes by cascading - FDS4FE• RS-422/485 data rates to 460 Kbps, RS-232 to 115.2 Kbps• RJ-45 expansion port extends RS-422 from each unit
Model FDF4SE is a serial to fiber converter and network hub.Up to four pairs of fiber cable can be connected to a single RS-232/422/485 serial port. If the PC port is RS-485, each fiberport can be addressed individually. Each fiber pair can beconnected to a Model FDS4FE to monitor, poll or control fouror more serial devices. Model FDS4FE converts a fiber signal toserial and acts as a network hub to monitor and control up tofour RS-232 serial devices.
If only one pair of fiber cables will be used, a serial to fiberconverter (above) may be used in place of the Model FDF4SE.Both Models FDF4SE and FDS4FE have RJ-45 RS-422expansion ports. By using the expansion ports and cascadingdevices to similar hubs you can increase the network size.Panel mount cases are 5.6 x 3.8 x 1.3 in (14.1 x 9.7 x 3.2 cm)Each unit requires power of 10 to 30 VDC. Optional 15 VDCpower supply is available.
Model No. Description Serial Connectors MODBUS Compatible? Power Power Supply PriceFOSTC Serial/fiber converter DB25 F Yes 12 VDC 232PS3 $159.00FOSTDRP Fiber optic repeater — Yes 10-30 VDC 232PS3 249.00You May Also Need…MDR-20-12 12VDC, 1.67A DIN Rail Power Supply, Slimline 45.00232PS3 120 VAC to 12 VDC @ 500 mA power supply 15.00
Fiber Optic Converter HubsCreate a network of serialdevices using a single pairof fiber cables
In-line Fiber Optic ConvertersFaster, reliable and longer distances with fiber communications
FOSTC
FOSTDRP
Reliable Data Communications for Expansive Retail Application
Model No. Description PriceFDF4SE Serial to fiber optic converter hub $399.00FDS4FE Fiber optic to serial converter hub 269.00You May Also Need…USBPS 120 VAC to 15 VDC @ 1 A power supply 15.00
Up to 2.5 m
iles
Printer
Fiber optic cable
Cashregister
PC
PC
FiberOptic
Converter(FOSTC) Fiber Optic
Converter Hub(FDS4FE)
RECEIVE
POWER+10–30 VDC
RECEIVE
POWER+10–30 VDC
TRANSMIT
PORT A
PORT C
PORT B
PORT D
Model FDS4FE
Fiber to RS-232Distribution Hub
Exp
ansi
on P
ort
In
O
ut
TM
ISOLATED
ISOLATED MODBUS 232/422/485 Fiber
Fiber 4X232
4X232 232/422/485
Card reader
SEND DATACONTROL
See Page 18
AUTOMATIC
More products available at bb-elec.com: Search
232LPTTL232OTTL 232LPTTL33 422TTL 232TTLTTL3USB9M
485CL
232PCLR232CL4R
232CL9R
TTL ConvertersEasy connections betweenTTL devices and RS-232 ports
Current Loop to Serial RS-232/422/485 ConvertersHigher loop currents and voltages
Current loop devices use current on or current off to transmitbinary digits. B&B Electronics converters interface RS-232 andRS-422/485 systems to the most common current loop ports, 20mA ports with open circuit voltages up to 30 V. Many modelscan be modified for higher loop currents and voltages.
High speed optical isolators couple and isolate transmit andreceive data. All B&B Electronics current loop converters havea transmit (T+ and T-) and a receive (R+ and R-) loop. Eachloop may be operated as an active or passive loop. When theconverter needs to provide the loop current, a 12 VDC powersupply is required for the current loop side. Maximum baudrate recommended for current loop converters is 19.2 kbps.Models 232CL9R and 232CL4R are port powered RS-232 to
current loop converters. No external power required forpassive loop installations. A power supply is required togenerate an active loop.
Model 232PCLR is an RS-232 to current loop converter thatrequires a power supply for the RS-232 side of the converter.Model 485CL is a 2-channel RS-485 or RS-422 to current loopconverter with Automatic Send Data Control. It requires apower supply for the RS-485/422 side of the converter. (Powersupplies not included.)
Industrial Current Loop Converter - see page 27.Model 232CLDR is a DIN rail mountable, wide temp serial tocurrent loop converter version for industrial applications.
Make easy connections between your TTL equipment and RS-232 ports. All models convert two channels in each directionfrom TTL to RS-232 or RS-422. Model 232OTTL offers 2000 Voptical isolation between the RS-232 and TTL sides and runs ata maximum baud rate of 38.4 kbps. The RS-232 side is portpowered. The TTL side requires +12 VDC at 100 mA isolated
from the RS-232 side. B&B Electronics also has several non-isolated TTL converters that can run at a maximum baud rateof 115.2 kbps: Model 232LPTTL is a port-powered version withDB9 connectors. Model 422TTL is an RS-422 to TTL converterthat requires +12 VDC and has DB25 connectors. Model232TTL requires +12 VDC and has DB25 connectors.
Model No. RS-232/422/USB Connector TTL Connector Isolation Power Supply Price232OTTL DB25 female DB25 male (5V) 2000V 232PS $74.00232LPTTL DB9 female DB9 male (5V) None Port-powered 49.00232LPTTL33 DB9 female DB9 male (3.3V) None Port-powered 49.00TTL5USB9M USB type B (includes cable) DB9 male (5V) None USB bus-powered 59.00TTL3USB9M USB type B (includes cable) DB9 male (3.3V) None USB bus-powered 59.00422TTL DB25 female DB25 male (5V) None 422PS 44.00422TTL33 DB25 female DB25 male (3.3V) None 422PS 44.00232TTL DB25 male DB25 female (5V) None 232PS 44.00You May Also Need…422PS 120 VAC to 12 VDC @ 100 mA power supply 15.00232PS 120 VAC to 12 VDC @ 100 mA power supply 15.00
Model No. Serial Connector Current Loop Connector Power Source for Serial Side Price232CL9R DB9 female Terminal block Port powered or 232PS2 $64.00232CL4R DB25 female Terminal block Port powered or 232PS2 64.00232PCLR DB25 female DB25 male 232PS 54.00485CL Terminal block DB25 female 485PS2 99.00You May Also Need…232PS 120 VAC to 12 VDC @ 100 mA power supply 15.00232PS2 120 VAC to 12 VDC @ 100 mA power supply 15.00485PS2 120 VAC to 12 VDC @ 100 mA power supply 15.00
Features• All models are optically isolated• Designed for 20 mA. Inquire about other values• Maximum baud rate: 19.2 kbps
232 TTL
USB TTL
ISOLATED
485 Current Loop
Free Current Loop Application NoteB&B Electronics’ widely read and cited Current Loop Application Note is available free! Recommendedreading and a great reference for System Integrators and anyone working with Current Loop Systems.
Visit our technical library at www.bb-elec.com to download your copy today.
BUILT
F O R Y O UO.E.M.
See Page 24SEND DATACONTROL
See Page 18
AUTOMATIC
Serial
28
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
Serial
29
Converters
FiberOptics
Specialty
Converters
Splitters,
Com
biners,Data Tap
sData
Switches
Cards
Find more information at bb-elec.com: Enter Model No. Search
RS-232 to RS-485 PLC ConverterQuick, easy connection from your PC to Allen-Bradley® PLC® programmable logic controllers
Isolated RS-485 PLC ConvertersProtect your Allen-Bradley® SLC™ PLC® fromdamaging surges, spikes and ground loops
Industrial 20mA Current Loop to RS-232 ConverterGreater RS-232 distances and signalprotection
232CLDR
Features• 10-30 VDC operation• 2-way isolation, 2000V input-output• Fixed terminal blocks• Wide temperature ranges (-40 to 80˚C)
• Baud rate up to 19.2 kbps• DIN rail mount with panel mount option• UL recognized
Model No. Description Price232CLDR RS-232 Serial to current loop converter $194.00You May Also Need…MDR-20-24 24VDC, 1A DIN Rail Power Supply, Slimline 45.00MDR-20-12 12VDC, 1.67A DIN Rail Power Supply, Slimline 45.00DRPM25 35mm DIN Rail to Panel Mount Bracket,
25mm wide 14.00
Features• 2000 VDC optical isolation• DIN rail mount with panelmount option
• Compare to 1747-AIC
Features• Monitor and control A-B SLC 500, 5/01, 5/02 and 5/03 PLCs from your laptop or PC• Optical isolation protects against ground loops and surges• LEDs monitor communication traffic• Compact in-line case complete with cables• No power supply requiredConnect your laptop or PC directly to Allen-Bradley SLC 500,5/01, 5/02 and 5/03 programmable logic controllers. This is anRS-232 to data highway / DH-485 converter, comparable to theconverter provided by Allen-Bradley for this application. 2000V optical isolation protects against ground loops and surges. A
power supply is not required because the module draws powerfrom the PLC. Includes short 6 inch (16.2 cm) cable forPC/module connection and long 7 foot (2.1 m) RJ45 cable forthe module/PLC connection.
Current loop signals can often transmit over lines that serialsignals can’t traverse reliably, due to distance, marginalconductors or electrical noise. Model 232CLDR interfaces RS-232 to the most common current loop ports, 20mA withopen circuit voltages.
Contact B&B Electronics technical support for information onloop currents and voltages. Maximum baud rate for currentloop converters is 19.2 kbps. The transmit loop and receiveloop each can be operated as active or passive. Requiresexternal power supply that is not included.
Free Current Loop Application Note, visit: www.bb-elec.com
This PLC optical isolation link connects easily between yourAllen-Bradley model SLC 500, 5/01, 5/02 or 5/03 and your RS-485 network. It protects your PLC against ground loops,spikes and surges from data and control lines. Compare thisunit to 1747-AIC.
The included 2 foot (61 cm) cable connects the RJ45 socket ofthe isolator and your PLC. Terminal blocks provide the RS-485link to the network. No power is required as the module drawspower from the PLC. An external power supply (not included)may also be used.
Handheld devices, PCs or laptops may be connected to the RS-485 network through the RJ45 port by using a B&BElectronics Model 232ABRJ45 converter.
Model No. Description Price485ABOIC Optically isolated RS-485 PLC converter $219.00You May Also Need…232PS 120 VAC to 12 VDC @ 100 mA power supply 15.00DRPM25 35mm DIN Rail to Panel Mount Bracket,
25mm wide 14.00
Model No. Description Price232ABRJ45 RS-232 to RS-485 PLC converter $179.00
Allen-Bradley, PLC and SLC are trademarks owned by Rockwell Automation andits various subsidiaries.
485ABOIC
232ABRJ45
• No power supply required• Compact design, complete with cables• Protect your PLC from transients onyour RS-485 network
DIN mountindustrial surge
suppressorpage 121
ISOLATED WIDE TEMP
ISOLATED Allen-Bradley
232 485
BUILT
F O R Y O UO.E.M.
See Page 24
BUILT
F O R Y O UO.E.M.
See Page 24
ISOLATED Allen-Bradley
FREE!Cables included
!
-PC to Module
-Module to PLC
Change a Serial Port to a Parallel Port or Vice Versa
Serial
30
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
CANOP CANFB
RS-232 Baud Rate Converter & Parallel-to-Serial Port ConverterConvert Data Rates, Formats, Handshaking;Printer Ports
CAN Isolator & Fiber ConverterAdd Nodes and Protect or Convert CANCopper to Fiber
CAN in industrial automationThe multi-layer structure of Controller Area Network (CAN)allows any station on a serial bus to communicate with anyother station. There are also benefits in central control and self-diagnosis and correction of transmission errors. A number ofCAN-based higher level protocols have been developed for usein industrial automation applications. CAN Application Layer(CAL), CAN Kingdom, CAN-open, DeviceNet and SmartDistributed System are just a few of these variations.
CAN isolator boosts signal, increases number of nodes.• Extend the node capacity of your CAN network• Optical isolation to 2000 VDC. Stops surges and spikes• DIN rail mount• Terminal block connections
Optical isolation stops surges Model CANOP extends the nodecapacity of your CAN systems and protects your CAN networkfrom component killing surges and transients. Model CANOP isan optically isolated CAN repeater that provides 2000 VDC ofoptical isolation, allowing you to separate and protect criticalsegments of your system from the rest of the CAN network. Thesturdy DIN rail mount case is 4.0 x 3.4 x 1.4 in (9.3 x 8.6 x 3.6cm). A 10 to 30 VDC power source is required.
Send CAN signals over fiber for noise resistance and isolation• Convert CAN signals to fiber and fiber to CAN• Fiber is naturally resistant to surges, spikes and electrical noise• DIN rail mount• Terminal block connections for copper• ST connectors for fiber
Fiber optic cable offers natural resistance to EMI/RFI noise andsurges that commonly interfere with electrical networks onfactory floors and in industrial environments. Model CANFBconverts CAN signals from copper to fiber and from fiber tocopper. To connect two CAN devices with fiber optic cable, twoModel CANFB converters are required. Copper connections areterminal block. Fiber connectors are standard ST connectors. Thesturdy DIN rail mount case is 4.0 x 3.4 x 1.4 in (9.3 x 8.6 x 3.6cm). A power supply of 10 to 30 VDC is required.
Model No. Description PriceCANOP CAN optical isolator, DIN rail mount $149.00CANFB CAN copper to fiber optic converter, DIN rail mount 199.00You May Also Need…MDR-20-12 12VDC, 1.67A DIN Rail Power Supply, Slimline 45.00
• Port-powered• Easy installation• Works with existing software• Operates as parallel-to-serial or serial-to-parallel converter• Baud rates up to 115.2 kbps• 96-byte buffer prevents data loss• Dimensions: 4.3 x 1.7 x 0.8 in (10.9 x 4.3 x 2.0 cm)
The Model 232SPS2 converts data from a parallel port to aserial communication format, or from a serial port to a parallelcommunication format. Connects directly between computerand printer without making any software modifications. Theserial port has a female DB25 connector and supports X-On/X-Off control as well as hardware handshaking. It supportsstandard baud rates from 1200 to 115.2 kbps, and Acknowledge,Busy, and Strobe on the parallel port. 8-position dipswitchconfigures the 232SPS2 to match system. The unit can be port-powered using DTR and RTS on the serial port or poweredexternally using 7 to 18 VDC. A power supply is available.
Different data rates, formats and handshaking? No problem with this baud rate converter! Many older devices lack the option to reconfigure baud rate,data format and handshaking. Model 232BRC acts as atranslator between asynchronous devices, matching eachdevice’s needs while maintaining the highest possiblethroughput. Each side can be individually configured to suitthe device connected to it. The module supports any data rateup to 115.2 kbps and all standard data formats.
Each side can also supply or accept hardware or softwarehandshaking, allowing the higher speed device to be locatedon either port. A PC is used to configure the Model 232BRC,but once configured, the module may be installed on anysystem. Non-volatile memory maintains all parameters whenpower is removed. Each port buffers 16K bytes of data. LEDindicators on each port signals when data is present in thebuffer. The connectors are DB9 female on port A, DB9 male onport B. Model 232BRC requires 12 VDC @ 100 mA. Moduledimensions are 5.8 x 3.6 x 1.2 in (14.6 x 9.1 x 3.0 cm). A powersupply is available.
Model No. Description Price232BRC RS-232 baud rate converter $219.00232SPS2 Parallel-to-serial converter 109.00You May Also Need…232PS 120 VAC to 12 VDC @ 100 mA power supply 15.00
232BRC
ISOLATED
Parallel to Serial Converters(232SPS2)
Fiber Optic Cablespage 128
Serial
31
Converters
FiberOptics
Specialty
Converters
Splitters,
Com
biners,Data Tap
sData
Switches
Cards
232CDTData TapsTap into your RS-232 data lines
Port CombinersTwo or more serial devices can share a PC serial port
Modem Data SplittersComputers & terminals use one modem without switching
Features• Use with modems, scanners, scales, other serial devices• Connect two or three PCs to one peripheral• Quick Plug-and-Play installation• No configuration required• Port powered. No external power required• May be left permanently installed
Gain reliability – capture data from one peripheral onredundant PCs. System economy – lets multiple PCs share a single peripheral.
Features• One PC monitors and controls multiple peripherals• Cascade combiners to connect many devices• Automatic or software PC access control• Quick, easy installation. May be left in place
System economy – connect one PC port to several intermittentdata sources.Gain reliability – connect redundant peripherals to one PC port.
Monitor and control multiple scales, scanners, terminals or otherserial devices with a single PC. Ideal for devices requiringintermittent PC access. The first device to send captures the datapath, locking out other lines. Data flow may also be softwarecontrolled using the RTS line. Data from the host PC is sent to allattached devices. Model 232PTC includes power supply. Model232PTC9 requires external 12 VDC @ 100 mA power. Orderpower supply separately.
Features• Monitor and record serial data streams• Transparent connection • Easy to install, may be left in place • No external power required
Tap in on a serial data stream and transparently feed anothermonitor, printer or other device. Dipswitches on Models9PCDT and 232CDT allow programming to monitor the maintransmit and receive data lines individually or together. Model232CDY connects into all 25 data lines and may be used as adata tap or to connect one PC port to two RS-232 serial devicesfor simultaneous or intermittent use.
PC PC
PC
PLC
Monitor
Barcodescanner
Barcode scanner
Scale
Barcode Scanner
Modem Data Splitter(9PMDS)
Port Combiner(232PTC9)
Data Tap(9PCDT)
Model No. Straight through Connectors Monitoring Port Price9PCDT 1 - DB9 male, 1 - DB9 female DB9 female $69.00232CDT 1 - DB25 male, 1 - DB25 female DB25 female 69.00232CDY 1 - DB25 male, 2 - DB25 female 69.00
Model No. Host PC Port Peripheral Ports Price232PTC One DB25 female Two DB25 female $124.00232PTC9 One DB9 female Two DB9 female 124.00You May Also Need…232PS 120 VAC to 12 VDC @ 100 mA power supply 15.00
Model No. PC Ports Peripheral Port Price9PMDS Two DB9 female DB9 male $64.00232MDS Two DB25 female DB25 male 64.00232MDS3 Three DB25 female DB25 male 69.00
More products available at bb-elec.com: Search
Serial
32
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
485DSS
Serial Data SwitchesSimplify your RS-232 connections with a smart switch
Model 485DSS is a distributed smart switch.• Attach a unit to each “dumb” RS-232 device to make it anetwork node
• Network up to 32 RS-232 devices up to 4,000 feet away• Requires 12 VDC power supply, Model 485PS2recommended
Use this model when your RS-232 devices are scattered. TheModel 485DSS uses RS-485 technology to reach RS-232peripherals up to 4,000 feet away. Each switch has a uniqueaddress. A simple serial command from your host turnscommunications on or off or requests status. QuickBasic demosoftware is included.
Model 232XS5 is a 5-port smart switch.• 5 RS-232 DB9 male slave ports• Expansion port provides up to 17 ports• Port powering is optional on all five ports• Supports 1200 to 115.2 Kbps• 120 VAC to 12 VDC power supply included
Its master port may be configured as either a DTE or DCE port.If the master port is DTE, the five other ports automaticallybecome DCE ports. The port expansion feature allowscascading of up to four Model 232XS5 switches to provide upto 17 addressable RS-232 ports from a single PC port.
Model 232MSS2 is a compact four port mini switch.• 4 RS-232 DB9 female slave ports• Automatic transmit and receive control• Supports 1200 to 115.2 Kbps• Requires 12 VDC power supply, Model 232PS recommended
Its master port may be configured as either a DTE or DCE port.If the master port is DTE, the four other ports automaticallybecome DCE ports. This model offers enhanced features thatautomatically control transmit/receive functions, stopinadvertent switching from binary/graphic file transfers andinactive slave devices from holding control of the master port.
Model 232BSS4, buffered, intelligent switch with Windowsdrivers.• Free setup software included for XP, 2000 or VISTA• Configure each port individually from your PC• 8 KB buffer on each port ensures no lost data• Connectors: master DB25 female, slaves DB9 male• Mix and match baud rates
A single RS-232 port on your PC can now communicateseamlessly with four or more RS-232 devices. Softwareconfigures ports and assigns a Windows COM port withinWindows 2000, XP or VISTA. Once configured, simply runyour existing application software to converse with each deviceas if it was directly wired to your PC. When used with B&BElectronics RS-485 or fiber optic converters, the Model 232BSS4smart switch may be connected to PCs or serial devices milesaway. Requires 12 VDC power. Model 232PS is recommended.
Model No. Host Port Slave Ports Power Supply Price232BSS4 DB25 female 4 DB9 male 232PS 12 VDC $289.00232XS5 DB9 female 5 DB9 male Included 12 VDC 199.00232MSS2 DB25 female 4 DB9 female 232PS 12 VDC 179.00485DSS Terminal block DB25 male 485PS2 12 VDC 139.00You May Also Need…232PS 120 VAC to 12 VDC @100 mA power supply 15.00485PS2 120 VAC to 12 VDC @100 mA power supply 15.00
232BSS4
232MSS2
Smart Switch – buffers prevent data loss
Product Manager’s NotebookJoe: How to connect up to 17 devices to one serial port
B&B Electronics’ smart switches can be used to connect one RS-232 port to four or more differentserial devices. These switches can be controlled in two different ways.The first way is “smart switch mode.” In this mode, the switch is controlled by sending a preamble(usually three characters) to the master port. As soon as the preamble code is received, the selectedslave port is connected to the master port.The second way the switch can be controlled is “port combiner mode.” In this mode, a slave portcan access the master port by asserting a handshake line. If none of the slave ports have theirhandshake line asserted, the switch can be controlled using the preamble codes. There is no delaythrough non-buffered switches. LEDs indicate which port is selected.
• Network your RS-232 peripherals usingonly a single serial port from your PC.
• Smart switches simplify multiple RS-232 connections.
PC
Printer Lab measuring device
Card reader
Smart Switch(232BSS4)
232XS5(FREE power
supply included)
Scale
232 485
Serial
33
Converters
FiberOptics
Specialty
Converters
Splitters,
Com
biners,Data Tap
sData
Switches
Cards
Find more information at bb-elec.com: Enter Model No. Search
What are universal PCI cards?In the days of yore, the PCI bus used 5 V signaling on the PCIconnector. Some PCI buses, including many of today’s newestPC’s use 3.3 V signaling. A keyed notch in the card prevents itfrom being plugged into the wrong version of the bus. If youbuy a 5 V PCI card, it won’t fit into a 3.3 V bus, and a 3.3 VPCI card won’t fit into a 5 V bus. A situation fraught with peril
for the casual customer! Not to worry, all of the PCI cards inthe following pages follow the Universal PCI specification,officially termed PCI V2.3. As you might guess, Universal PCIis compatible with both 3.3 V and 5 V systems. To tell if yourcard is Universal PCI, look for two keyed notches in the busconnector, indicating that it will fit (and work!) in any PCIsystem.
Serial cardsAn Introduction to PCI Technology
What about the ISA bus?Need serial cards for the ISA bus? We’re happy to say that B&B Electronics continues to stock and support ISA cards (to be honest,some of us even feel an emotional attachment to these cards). To see our full line of multi-interface and isolated ISA cards clickover to www.bb-elec.com
Multi-interface PCI (page 34)You’ll find that B&B Electronics’ MIport family of PCI cards has the flexibility to fit anysystem. Two, four and eight port versions feature RS-232, RS-422 and RS-485 capability!
Optically isolated multi-interface PCI (page 34)These optically isolated members of the MIport family of PCI cards are robust enough for thetoughest and most mission-critical environments. One, two and four port versions offer theflexibility of RS-232, RS-422 and RS-485!
PCMCIA (page 35)Add serial or parallel ports to your laptop for mobile and field service applications. One, twoand four ports are available in both RS-232 and RS-422/485 versions. Rugged versionsfeaturing a permanently attached cable are also available.
ExpressCards (page 35)ExpressCards add 1 to 2 high-speed serial ports (RS-232 or RS-422/485) or 1 parallel port tonotebooks and other mobile devices. High throughput and low latency is comparable tonative, built-in COM ports.
Technician’s NotebookJanet: Isolation zones explained
Isolated serial card design requires attention to three things. Special optocouplers isolate theserial signals from the PCI bus. Unique isolated DC-to-DC power supplies provide power to
each of the ports and give us port-to-port isolation.Finally, the circuit board uses strict spacing rules –we call these isolation zones. Surges follow the pathof least resistance, and a tiny gap between traces isan easy path for surges to reach the delicatecomputer bus, bypassing expensive isolationcomponents entirely.
You’ll find wide isolation zones on B&B Electronics’isolated PCI cards. If you’re buying boards fromsomeone else, hold them up to the light and checkfor these isolation zones, you might not be gettingthe protection that you’re paying for.
Isolation zone
Isolation zones on the 3PCIOU2
Back of 3PCIOU2
SSCLP-100 DSCLP-100FREE fanout
cable included!
QSCLP-100FREE fanout
cable included!
3PCIU4FREE DB9M fanoutcable included!
3PCIOU2True 2000 VDC isolation!
3PCIU2Operates on either5 V or 3.3 V buses
Serial
34
Converters
Fiber
Optics
Specialty
Converters
Splitters,
Com
biners,
Data Taps
Data
Switches
Cards
Technical Support & Ordering: 815.433.5100 or bb-elec.com
Multi-Interface Universal PCI CardsOne to eight port RS-232/422/485 cards –standard and optically isolated modelsBenefits• Available in 1, 2, 4 or 8 ports• Optically isolated and standard models• Multi-interface: RS-232/422/485 selectable• 5 V and 3.3 V PCI bus compatible• PCI-X compatible• Positive-connecting DB9M ports
Universal PCI cards suit most any application. Output can beRS-232, RS-422, or RS-485. Use RS-422 to extend range, RS-485to extend range and provide multi-drop ability.
Optically isolated versions offer true 2000 VDC isolation and port-to-port isolation. Compare B&B Electronics cards to others– B&B Electronics’ premium optical isolation zone along withoptocouplers and our unique isolated DC-DC converter designprotect your PCs from voltage surges and ground loops.
DB9M connectors offer positive thumbscrew locking, morerobust than phone jack connectors. Four and eight port modelsinclude fanout cables. The eight port model has four RS-232/422/485 and four RS-232 ports. Four port isolated model3PCIOU4 has two RS-232/422/485 ports and two RS-422/485ports. All models support baud rates up to 460.8 kbps.Operating Systems are Windows XP, Windows 2008 Server(32/64 bit), Windows Vista (32/64 bit), Windows 7 (32/64 bit),Linux Kernal 2.6x for Ubuntu Desktop & Server (32/64 bit).
Applications• Industrial monitoring and control• SCADA • POS• Medical • Security
Model No. Ports Isolated Interface Connector Price3PCIOU1 1 Yes RS-232/422/485 DB9 male $219.003PCIOU2 2 Yes RS-232/422/485 DB9 male 319.003PCIOU4 4 Yes 2 Ports RS-232/422/485 2x DB9 male on card 499.00
2 Ports RS-422/485 2x DB9 male use 2nd expansion slot(ribbon cables and bracket included)
3PCIU2 2 No RS-232/422/485 DB9 male 199.00
3PCIU4 4 No RS-232/422/485 DB37 female 269.00(DB37 to 4x DB9 male cable included)
3PCIU8 8 No 4 Ports RS-232/422/485 DB78 female 439.004 Ports RS-232 (DB78 to 8x DB9 male cable included)
Multi-interface PCI cardsComplies with MD1 low profile cardsize, and slim line PC applications
Applications• Point-of-sale • Kiosk • Medical • Security
One to eight port cards are available for RS-232 applications;one or two port cards for RS-422/485. Use RS-422 to extendrange, RS-485 to extend range and provide multi-drop ability.
DB9 connectors offer positive thumbscrew locking, more robustthan phone jack connectors. One port model has port onfaceplate. Two, four and eight port models include fan-outcables. Operate on both 3.3 and 5 V PCI, as well as PCI-X buses.Maximum baud rate on most models is 460.8 kbps (ModelsQSCLP-100 and ESCLP-100 have a maximum baud rate of 921.6kbps). Supports Windows XP/Vista/7 (32/64 bit).
Features• Low profile to fit slim-line PCs• Available with 1 to 8 ports • Choose RS-232 or RS-422/485 models • Compatible with 5 V and 3.3 V PCI bus signals • Positive connecting DB9 ports• Includes standard PCI (full-height) bracket• Supports Windows XP/Vista/7 (32/64 bit)
RS-232 low profile PCI cards
RS-422/485 low profile PCI cards
Model Ports Connector PriceSSCLP-100 1 DB9 male $90.00DSCLP-100 2 2 - DB9 male (fan-out cable included) 115.00QSCLP-100 4 4 - DB9 male (fan-out cable included) 165.00ESCLP-100 8 8 - DB9 male (fan-out cable included) 330.00
Model Ports Connector PriceSSCLP-200/300 1 DB9 female $123.00DSCLP-200/300 2 2 - DB9 female (fan-out cable included) 165.00
ISOLATED
BUILT
F O R Y O UO.E.M.
See Page 24
RS485 Models
Serial
35
Converters
FiberOptics
Specialty
Converters
Splitters,
Com
biners,Data Tap
sData
Switches
Cards
SSPR-100
DSPR-100
SSPXP-100
DSPXP-100
Serial and Parallel ExpressCardsAdd serial and parallel ports to mobile devices
Model No. Interface Ports Connector PriceSSPXP-100 RS-232 1 DB9 male $123.00DSPXP-100 RS-232 2 DB9 male 170.00SSPXP-200/300 RS-422/485 1 DB9 female 142.00DSPXP-200/300 RS-422/485 2 DB9 female 189.00SPPXP-100 Parallel 1 DB25 female 149.00
PCMCIA Serial I/O CardsAdd One to Four SerialPorts to Your Laptop
Quatech serial PCMCIA cards are small, light, and have lowpower requirements to reduce battery drain. They are availablewith one to four independent RS-232/422/485 ports. Thestandard version comes with a convenient detachable cable. Formore extreme computing environments, permanently attachedruggedized cables are available. These cards are a flexible,
low-cost way to interface serial peripherals in a wide variety ofmobile applications. Device drivers support the followingoperating systems: Windows 32/64 bit XP/VISTA/7 , CE 3.0,CE.NET, Linux, OS2. Support is also available for older versionsof Windows.
Features• RS-232/422/485• Low Power Requirements• High Speed – up to 921.6 kbps• Plug & Play / Hot Swap Capability• Windows 7 (32/64 bit)
Model No. Interface Ports Connector Max Baud Rate Special Features PriceSSP-100 RS-232 1 DB9 male 921.6 kbps One port $120.00DSP-100 RS-232 2 DB9 male 921.6 kbps Two ports 180.00SL0751-161 RS-232 4 DB9 male 115.2 kbps Ruggedized, cable-attached 360.00SSPR-100 RS-232 1 DB9 male 921.6 kbps Ruggedized, cable-attached 140.00DSPR-100 RS-232 2 DB9 male 921.6 kbps Ruggedized, cable-attached 200.00SSP-200/300 RS-422/485 1 DB9 female 921.6 kbps Send data control 150.00DSP-200/300 RS-422/485 2 DB9 female 921.6 kbps Send data control 210.00SPP-100 Parallel 1 DB25 female 700 kbps IEEE 1284 EPP 120.00
ExpressCards are another great way to add serial and parallelports to notebooks and other portable devices. Traditionally thishas been done with a USB or PCMCIA interface. However,many portables no longer ship with a PCMCIA slot available.One advantage to using ExpressCard technology over USB is
that the added ports more closely emulate those of built-inports. In other words, higher throughput and lower latency iscommonly better with ExpressCards based on PCIe designs.These ExpressCards are designed in 34mm format which meansthey will fit into any ExpressCard slot.
Features• New generation of I/O expansion for notebooks • Add 1 to 2 high-speed serial ports or 1 true parallel port• Supports PCI Express Base Specification Revision 1.1a • Fits into any ExpressCard slot • Built-in 1024 byte FIFOs for increased data transmit and receive speeds• Baud rates up to 921.6Kbps • Hot plugging and hot swapping features • Supports Windows XP/Vista / 7 (32/64 bit)
RUGGED
SEND DATACONTROL
See Page 18
AUTOMATIC
Applications• POS Systems • Field Data collection • Medical Testing
FREE!Device DriversIncluded
More products available at bb-elec.com: Search