Battery & Electrical - storage.googleapis.com · • Test all permanent (Ethylene Glycol) solution with radiator hot or cold. Two scales show freezing point of radiator solution and

JTC AUTO TOOLS USA BATTERY & ELECTRICAL

JTC AUTO TOOLS USA 678 – 876 – 3470 2600 NORTHLAKE DR., SUITE F, SUWANEE, GA, 30024

JTC-1039 BATTERY TESTER

• Avoids dead battery and helps to extend

battery life.

• Tests battery life by hot or cold, and

detects overcharge.

• Applicable: 12 and 24-volt systems.

JTC-1040 ANT–FREEZE TESTER

• Avoid winter freeze up and summer boil over.

• Test all permanent (Ethylene Glycol) solution

with radiator hot or cold.

• Two scales show freezing point of radiator

solution and boiling point of summer coolant.

JTC-1041 BATTERY HYDROMETER

• Test the battery in seconds.

• Color-coded float for easy reading.



JTC-1043 DELUXE BATTERY FILLER

• Large suction designed to suck easily and

quickly.

• For battery fuller or any other liquid.

JTC-1105 R-134a MANIFOLD

• Enclosed the 1107 adjustable coupler.

• R-137a sight glass manifold with three 60"color-

coded hoses.

• With sight glasses

• High pressure:

0 ~ 500psi

0 ~ 35kg/cm2

• Low pressure:

0 ~ 350psi

-1 ~ 24.5kg/cm2

• Vacuum: 0 ~ 76in/Hg

JTC-1107 ADJUSTABLE QUICK COUPLER SET

• Enclosed the high side and low side

coupler.

• The valve core puller is adjustable to

fit the different valve core.



JTC-1134 ADAPTERS (VOLVO)

• Applicable: Volvo model for high side

JTC-1137 QUICK COUPLER SET

• Enclosed the high side and low side coupler.

• Straight design suitable for the confined space.

JTC-1138 VALVE CORE REMOVER

• Designed for removing valve coves in

air condition system.

• Spec: R-12 / R-134a



JTC-1139 VALVE CORE REMOVER

• Designed for removing valve coves in air

condition system.

• Spec: R-134a / R-134a Extend

JTC-1153 SCALE INJECTOR

• Distinctive design with scale to inject the dye and

pack oil for R134a and R12 system.

• Capacity: 1/4 oz. (7.5ml) to 2 oz. (60ml)

JTC-1242 SPARK PLUG WIRE PLIERS

• Length: 200mml

• Small design is good to use in a narrow

space

• In order to fit the angle of the electric

wire, the head of the remover uses a

special curve design, special design on

the head of the remover is holding the

electric wire tightly.



JTC-1248 ELECTRIC CIRCUIT TESTER

• Voltage: 6-24dcv

• Wire length: 4.5mt

• 8A safety gear inside. The automatic power

failure will start when voltage is over the limit.

• This tool also can test the positive and

negative voltage.

• Tests continuity in switches, relays, diodes and

fuses, and wiring harnesses.

• Polarity test cables and sockets.

• Find short circuits and bad earths fast.

JTC-1249 CORDLESS CIRCUIT TESTER

• Sharp probe tip covered with brass protection

cap, check function of car lights faster and easier.

• Check range: 6-12, 24v.

JTC-1260 A/C SPRING LOCK COUPLING TOOLS

• Distinctive design for removing the

spring lock coupling in A/C system.

• Two tools in a set for the distinct size

of coupling.

• Applicable: Toyota after 2000.



JTC-1261 METAL CASE BATTERY BRUSH

• Designed for cleaning the battery

terminals.

• Can use on both sides.

JTC-1301 RADIO REMOVE TOOL KIT

• Applicable: Mercedes, BMW, VW, Audi, Ford, as

well as American cars.

• Total number of items: 10 pcs

JTC-1354 FIN STRAIGHTENING TOOL

• Made of stainless steel.

• Special design to clean and straighten

the evaporator fin.



JTC-1357 R134a & R12 SIDE CAN TAP

• Distinctive design to open the cans from

the side for easy charging.

• With 3 adjustments for all kinds service

cans.

• Double outlet threads:

1/2" ACME for R-134a

1/4" 20T for R-12

JTC-1358 DISCONNECTION TOOL SET

• All the disconnect tool you need to work with

spring locking coupling, fuel line, and

transmission cooler line.

• Contents:

Spring locking tool "3/8" (red), “1/2" (blue), “5/8" (black),

“3/4" (white).

Fuel line disconnect tool: “3/8" (yellow), “1/2" (green).

Fuel line fitting disconnect tool: “5/16" (gray), “3/8" (cyan).

FORD / GM quick disconnect tool: “1/2" (black).

JTC-1438 MULTI–PURPOSE CONNECTOR SET

• Various male/female connectors.

• It is a perfect circuit checking tool.

• You can use it to adjust and check the

problem of car rapidly and accurately.

• Contents:

5KΩPotentiometer (Variable Resister) x 2

LED Stroboscope x 2

Various automotive flat terminals x 48

Various automotive circular terminals x 24

Acicular Probe x 4

Probe x 2

1 to 2 connector x 2

Alligator clip x2

1 to 1 connector x 4

SRS connector x2



JTC-1507 COIN TYPE SPARK PLUG GAUGE

• Testing range:

0.6 ~ 2.4mm

0.020 ~ 0.100in

JTC-1529 TERMINAL TOOL SET

• Contains 12 pieces which specifications are

various.

• Use for installing and removing the terminal by

most cars.

JTC-1551 COMPRESSOR CRANKSHAFT PULLEY WRENCH

• To fix A/C compressor crankshaft

pulley and install/remove centre

screws conveniently.

• Adjustable three-stud design for GM

R-4 compressors.

• Has applications on some GM,

Warner, Pitts and Ogura clutches.

• Size of three studs: 3.6, 8.0mm.



JTC-1609 A/C COMPRESSOR CLUTCH REMOVER KIT

• Replace clutches found on FS6, C171, 6P

and 148-computer.

• GM R4 and R6, HR-6, DA-6 and V5 A/C

compressors.

• And compressors of Sanden SD505, 507,

508, 510, 575, 708 and 709.

• 2 and 3-hole puller plate fits most clutches,

the mechanical force does the pulling job.

JTC-1633 SPARK PLUG WIRE PLIERS

• The spark plug wire pliers are specially designed

for removing hard to reach high voltage lean

wire.

• Good insulated handle and the grooves avoid any

sliding down in operation, especially on

Mercedes-Benz.

• Length: 220mm.


• Power on type tests 6,12 and 24-volt

circuits.

• For wire breaks, short, fuses, lamps,

relays armatures, etc.

• 75mm inspection probe with point

cover.

• 120cm long 16# wire with alligator

clip.



JTC-1827 A/C, FUEL LINE DISCONNECT TOOL SET

• Easily disconnect air conditioning lines and

quickly connect fuel lines.

• Size include: 1/4", 5/16", 3/8", 1/2", 5/8",

3/4", 7/8".

JTC-1834 A/C SPRING LOCK COUPLING TOOLS

• Used on 1981 the current Ford cars and pickups

having spring lock connection on the A/C system.

• For 3/8", 1/2", 5/8" and 3/4" couplers.

JTC-3205 CRIMPING TOOL

• Applicable: Use with the automotive

terminals and open barrel terminals



JTC-4056 SPECIAL LIGHT BULB PLIERS

• Special pliers for installing and removing

wedge base bulbs, e.g. bulb in blower

control switch on VW Passat 1996, seat

Leon bulb in ambient air switch on OPEL

Astra F, MERCEDES-BENZ and RENAULT

passenger cars.

• Blades made of special steel with plastic

protective caps, pliers with solid plastic

body.

JTC-4081 20 PCS RADIO REMOVAL TOOL SET

• Universal tool for installing and removing radio

on car.

• Applicable: VW, AUDI, Mercedes Benz, Skoda,

BMW, FORD.

JTC-4082 46 PCS RADIO REMOVAL TOOL SET

• Universal tool for installing and removing

radio on car.

• Applicable: BENZ, BMW, FIAT, OPEL, VW,

AUDI, FORD, SKODA, PORSCHE, etc.

• Applicable radio brand: KENWOOD,

SONY, PIONEER, PANASONIC, CLARION,

BLAUPUNKE, BECKER, etc.



JTC-4088 R-1234yf QUICK COUPLER SET

• For the new system R-1234yf.

• Enclosed the high side and low side

couplers.

• The valve core puller is adjustable.

• Special designed for high pressure system.

JTC-4137 12V / 24V SURGE PROTECTOR

• Provides protection against electrical devices

from electrical surges and spikes generated by

welding units. This prevents the need to

disconnect batteries result in the loss of stereo

and other memories.

• Product dimension: 50 x 30 x 110mm.

• Max. Input Voltage: DC 35V

• Power Cord: red/black, 450mm(L), 10AWG

• Suitable for DC 12V, DC24V lead-acid batteries.

• Input Voltage: DC12V or DC24V

• Peak forward Surge current: 200-amp at 8.3ms

• Max Surge Capability: 1500W at 1ms

JTC-4195 10 PCS A/C, FUEL LINE DISCONNECT TOOL SET

(ELBOW)

• For separating quick disconnect

fittings on fuel and cooler lines.

• Unique offset design allows for access

in confined or obstructed areas.

• Easy, one-handed operation.

• Material: Plastic.

• Contents:

JTC-4195-1 (Dark Grey) Size: 1/2"

JTC-4195-2 (Blue) Size: 5/8"

JTC-4195-3 (Black) Size: 3/4"

JTC-4195-4 (Silver) Size: 7/8"

JTC-4195-5 (Red) Size: 5/16"

JTC-4195-6 (Gold) Size: 3/8"

JTC-4195-9 (Jacinth) Size: 3/16"

JTC-4195-8 (Purple) Size: 3/8"

JTC-4195-9 (Orange) Size:1/2"

JTC-4195-10 (Light Green) Size:1/2"



JTC-4196 LED HEAVY DUTY ELECTRIC CIRCUIT TESTER

• Dual color LED indicates red for power

(high) and green for ground (low).

• Heavy-duty probe.

• 6'(1.8m) long heavy-duty 18-gauge dual

leads with battery clips and spring strain

relief.

• High-impact plastic body.

• High impedance tester protects computer

circuitry.

• Services 6, 12, 24 Volt systems.

JTC-4237 LED CONNECTOR TESTING SET

• Contents:

1 pc LED testing light

2 pcs testing probes red & black

• The probe made from stainless steel for easier

testing.

• The LED shows yellow light when connecting with

positive pole and shows red light for negative

pole.

JTC-4317 SIMPLE TYPE A/C SYSTEM TESTING ADAPTERS

SET

• Specially designed for various A/C

system fitting and tube from 1/4" to

7/8".

• Contents 2 clamps with gaskets 3/8",

1/2", 5/8", 3/4" / each 2 pcs.



JTC-4446 CURRENT LEAKING DETECT KIT

• Check the current leaking without losing computer

memory.

• Provide a safe and quick way to detect the leakage or

consumption of the electricity on the car.

• Connecting method:

1. Use the test clamp to connect with the car battery.

2. Use the OBD2 test clamp to connect to the backup battery.

• Disconnect the negative battery terminal from the car

battery to begin the test.

• (This method can be a power supply when you change

the battery.)

• Max Load: DC32V/20A.

• Measurement Range: 0.01A ~ 19.99A

• Contents: TERMINAL CURRENT CLAMP x 1

OBD2-CURRENT CLAMP x 1

Current tester x 1

Fuse x 2

Puller of blade fuse x 1

Puller of mini fuse x 1

JTC-4499 REFRIGERANT MANIFOLD GAUGE WITH MAGNETIC BELT

• Patent magnetic belt designed, can easily mounting on

compatible surface or hook on non-magnetic surface.

• Window type integrated aluminum frame, provide

complete fit and trouble-free operation.

• Applicable for refrigerant R12, R22, R134A, and R1234yf.

• Gauge size:

80mm dimension with protective rubber cover

High Pressure: 0-500psi/ 0-35 kg/cm²

Low pressure: 0-350psi/ 0-24 kg/cm²

Vacuum: 0~-30inHg/ 0~-76 cm/Hg.

• Hose size: 60" length black hose, Red, Blue and Yellow nuts

at the front for discrimination. 600psi working pressure &

3000psi burst pressure.

• With a bearing at the bottom of the coupler, the hose will

not be released while shaking.

• Optional couplers for different refrigerant.

JTC-4534 RELAY PLIERS

• Use for removing the electrical relays

on most vehicles.

• Specially designed handle and tips for

narrow space usage.

• The tips of the pliers are angled to fit

slots or the edge of relay cover.



JTC-4551 INFRARED THERMOMETER (ECONOMY)

• Same function as JTC-1407

• Applicable range: -20 ~ 320°C (-4 ~ 608°F)

JTC-4565 DUAL–ANGLE BRASS LINE BENDING PLIERS

• Special dual-purpose design, capable for bending

3/16" and 1/4" OD tube.

• By using this tool can prevent damage to the

tube, especially in narrow space.

• Specially designed handle and unique head keeps

the handle in line with the tubing for proper

leverage, even during work.

JTC-4608 DIGITAL BATTERY TESTER

• Display: 3 Led (Green, Yellow, Red).

• No internal battery.

• Test leads: 31in./80cm.

• Application: 12V battery.

• Operating range: 200 ~ 1200CCA (SAE)

• Rating system: SAE, DIN, EN, INE, CA

• Test discharged battery: Down to 7V

• Voltmeter: 7V ~ 15V

• Tolerance: CCA: < +/- 10%

• Resolution: 1 CCA



JTC-4609 DIGITAL BATTERY TESTER WITH PRINTER

• Backlit display: 2 lines 16 characters LCD.

• Thermal printer built inside.

• Printing paper width: 37mm.

• Test code function can Be added.


• Software includes: 7 languages:

• English, French, Spanish, Germany, Italian,

• Portuguese, Japanese.

• Application: 6V & 12V batteries.

• Operating range: 40~2000CCA(SAE)

• Rating system: SAE, DIN, EN, IEC, JIS (Battery

type No.)

• Test discharged batteries: Down to 1.5V

• Voltmeter: 1.5V ~ 30V

• Tolerance: CCA: < +/- 15%, +/- 0.05V


JTC-4610 DIGITAL BATTERY / CHARGING / STARTING SYSTEM

ANALYZER WITH PRINTER

• Backlit display: 4 lines 16 characters.

• LCD with adjustable brightness.

• Thermal printer built inside.

• Printing paper width: 50mm.

• Date/time function.


• Software includes: 9 languages:

• English, French, Spanish, Germany, Italian, Portuguese, Japanese, Chinese

(T/S).

• Application: 6V & 12V batteries,

12V & 24V charging system

• Operating range: 40 ~ 2000CCA (SAE)

• Rating system: SAE, DIN, EN, IEC, JIS (battery type No.)

• Test discharged battery: Down to 1.5V

• Voltmeter: 1.5V ~ 30V

• Tolerance: CCA: < +/- 15%, +/- 0.05V


JTC-4657 8 PCS A/C DISCONNECTION TOOL SET

• All the disconnection tool you need to

work with spring locking coupling, fuel

line, and transmission cooler lines.

• Contents:

Aluminum disconnect tool: 1/4" (black), 5/16"

(red), 3/8" (yellow), 1/2" (blue).

Two ends disconnect tool: 5/16" ~ 3/8".

Long disconnect tool: 1/2".

Round disconnect tool: 1/2".

Two-point disconnect tool and rubber cap x 4.



JTC-4688 23 PCS TERMINAL RELEASE TOOL SET

• Distinctive design to release terminals

from the plastic connectors without

damaging either.

• Release terminals on most body wiring

connectors.

• Applicable: suitable for most vehicles.

JTC-4790 ELECTRIC TEST CONNECTOR SET

• Economic type connector set are designing for

car factory demand.

• You can use it nimble on the adjustment and

assistant the technician checking the car

problem rapidly and accurately.

• Contents:

1 pc 5kΩ Potentiometer (Variable resister)

2 pcs LED stroboscope

1 pc Wire checking clips

6 pcs Various automotive flat terminals

2 pcs Probe

1 pc SRS connector

2 pcs Alligator clip

4 pcs Acicular probe

4 pcs 1 to 1 connector

JTC-4801 EXTRA LONG HIGH SIDE QUICK COUPLER

• Total length: 85mm; O.D.: φ 26mm

• The valve core puller is adjustable to fit

the different valve core.

• Special extra-long design for narrow

space or deep hole.

• Applicable: BMW 2004 later, VOLVO S series

and many new models.




(GENERAL & HYBRID CAR)

• Compatible with current 12V system plus

newer 42V system.

• Safe for low current circuits since tester

only draws 3 milliamps at 12V.

• Automatic voltage identification with blue

for 12V and red for 42V systems.

• Two super-bright LED's for visibility under

all conditions.

• New crystal-clear handle provides 360°

visibility, even in bright light.

JTC-4872 RUBBER SPARK PLUG REMOVER / INSTALLER

• Flexible shaft permits access from many angles.

• Easily insert and remove hard-to-reach spark

plugs with the flexible shaft tool.

• Removing: use it to take out spark plugs from

deep hole.

• Installing: use it to insert spark plugs into cylinder

grooves, and adjust it for installation.

• Length: 330 mm

JTC-5209 5 IN 1 CRIMPING TOOL

• Applicable: Wire cutter/ insulated

terminals crimp/ screw cutter/ Wire

stripper/ open barrel terminal.

• Size: Total length: 230mm.

• Width: 4.0 mm thickness.

• Material: Carbon steel HRC:48° ~ 53°.



JTC-5616 TERMINAL CRIMPING TOOL

• Spec:

AWG 22-18 / 16-14 / 12-10

DIN 0.5-1.0 / 1.5-2.5 / 4-6mm2

• Applicable: INTER-LOCKING & NON-INSULATED

JTC-5617 TERMINAL CRIMPING TOOL

• Spec:

AWG 22-18 / 16-14 / 12-10

DIN 0.5-1.0 / 1.5-2.5 / 4-6mm2

• Applicable: FOR INSULATED TERMINAL

JTC-5621 AUTOMATIC WIRE STRIPPER & CRIMPER

• The easy stripper cutters are made by

precision machines and HRC55-60

blade cuts wire fast and smoothly.

• Applicable:

Stripper range: AWG 24-10 (0.2 ~ 6.0mm2).

For insulated terminals: AWG 22-10

(0.5 ~ 6.0mm2).

For non-insulated terminals: AWG 22-10

(0.5 ~ 6.0mm2).

For auto ignition terminals: 7-8mm.



JTC-5622 TIE GUN

• Fasten and automatic cut ties with

adjustable bundling pressure.

• Applicable:

Tie thickness up to 1.6mm.

Tie width from 2.2 to 4.8mm.

JTC-5629 BATTERY TERMINAL CRIMPING TOOL

• Specially designed to provide a better way to

prevent over crimping and a neat clean

appearance.

• It's essential tool for replacing or repairing

battery cable terminal ends.

• Applicable: Terminal size from 6ga. To 4/0.

JTC-5632 TUBE CUTTER & FLARING TOOL

• Contents:

Tube cutter: 1/8" ~ 1-1/8".

Flaring tool: 3/16", 1/4", 5/16", 3/8", 7/16",

1/2", and 5/8".

• Another kit JTC-5632M with metric

size: 4, 6, 8, 10, 12, 14, 16mm.



JTC-1360A VALVE CORE REMOVER & INSTALLER TOOL

KIT

• Service valve cores without losing the system

charge.

• Unique design offers a locking device that

holds the shaft in place while removing or

installing the valve cores.

• Contents:

Valve assembly

Standard valve core remover / installer

GM large bore valve core remover / installer

JRA R134 valve core remover / installer

Volvo and 8mm valve core remover / installer

R134a H φ16 connector

R134a L φ13 connector

5/16"FL swivel connector

1/4"FL swivel connector

Adapter 1/4"M x 3/16"F

Adapter 1/4"M x 1/2" ACME F

H14 Wrench

2 sides valve core Remover

JTC-1409A FLUSH KIT

• Volume: 1L

• Flush solvent performs all mechanical actions

required to clean out contaminated systems.

• The cylinder is equipped with a top inlet fitting

and a side outlet for connecting to compressed

air lines.

• With a gun to control on /off.

JTC-1719A AUTO COMPUTER MEMORY UNIT

• Maintains the memory of vehicle

radios, clock & computer functions

when battery is disconnected.

• Simply attach a 9-volt battery and plug

the tool into cigarette lighter.

• Keeps settings up to 4 hours.



12V:

JTC-1720A ADJUSTABLE SPARK GAP TESTER

• Rapidly, accurately, safely, conveniently to

judge the quality of ignition system, depends

on difference types of car condition and adjust

the different gaps.

• To judge the quality of coil according to spark

color and distance.

• The car factory chooses the appropriate coil

depends on engine and ignition system.

• The airtight design to prevent the high volts

leakage.

JTC-4614B MULTI–FUNCTIONAL BATTERY TESTER (12/24V)

• Functions: Battery testing: 12V common Lead-Acid &

AGM Battery Generator test, Starting test.

• Backlit display: 60x32mm (64x12B LCD)

• Test leads: 100cm

• Voltmeter: 9-15 VDC (12V batteries)

• Operating range: 100-1700 CCA(SAE)

• Tolerance: CCA: <± 10% <± 0.1V

• Rating system: CCA, DIN, EN, IEC, JIS.

• Electronic logic test. To test through low-frequency

signals without external load large battery tester.

• To repeat the test, no safety concerns.

• Language: English, Chinese, etc. But only one mode

can be selected as you purchase.

JTC-4726A OBD – II POWER SUPPLY ADAPTER

• Special adapter to prevent lose any data

from replacing the battery.

• Connect the adapter from battery to OBD-II

plug for continue power supply.

• Optional power supplier:

①12V battery

②9V dry battery

• The adapter with 2 LEDs to show if the

battery with enough.

9V:

Documents

Battery & Electrical - storage.googleapis.com · • Test all permanent (Ethylene Glycol) solution with radiator hot or cold. Two scales show freezing point of radiator solution and